# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# Czech messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Translations from iso-codes:
#   Alastair McKinstry <mckinstry@computer.org>, 2001.
#   Free Software Foundation, 2002,2004 
#   Miroslav Kure <kurem@debian.cz>, 2004--2010.
#   Petr Cech <cech@debian.org> (Petr Čech), 2000.
#   Stanislav Brabec <utx@penguin.cz>, 2001.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: s390-netdevice@packages.debian.org\n"
"POT-Creation-Date: 2019-09-26 22:05+0000\n"
"PO-Revision-Date: 2016-03-05 08:36+0100\n"
"Last-Translator:  Miroslav Kure <kurem@debian.cz>\n"
"Language-Team:  Czech <provoz@debian.cz>\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr "ctc: Channel to Channel (CTC) nebo ESCON spojení"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr "qeth: OSA-Express v QUIDO módu / HiperSockets"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr ""
"iucv: Inter-User Communication Vehicle - dostupné pouze pro hosty systému VM"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr "virtio: KVM VirtIO"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr "Typ síťového zařízení:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
"Vyberte typ primárního síťového zařízení, které budete potřebovat pro "
"instalaci Debianu (přes NFS nebo HTTP). Podporována jsou pouze vypsaná "
"síťová zařízení."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr "CTC zařízení pro čtení:"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr "Následující čísla zařízení mohou patřit k spojením CTC nebo ESCON."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr "CTC zařízení pro zápis:"

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:12001
msgid "Do you accept this configuration?"
msgstr "Je toto nastavení správné?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""
"Nastavené parametry jsou:\n"
" kanál pro čtení = ${device_read}\n"
" kanál pro zápis = ${device_write}\n"
" protokol        = ${protocol}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr "Nebyla rozpoznána žádná CTC nebo ESCON spojení"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "Please make sure that you have set them up correctly."
msgstr "Ujistěte se, že je máte nastavena správně."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr "Protokol pro toto spojení:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr "Zařízení:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr "Vyberte OSA-Express QDIO / HiperSockets zařízení."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"
msgstr ""
"Nastavené parametry jsou:\n"
" kanály   = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr "Nebyly rozpoznány žádné karty OSA-Express QDIO / HiperSockets."

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
"Nebyly detekovány žádné karty OSA-Express QDIO / HiperSockets. Pokud běžíte "
"ve VM, ujistěte se, že je karta připojena ke svému hostu."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Port:"
msgstr "Port:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Please enter a relative port for this connection."
msgstr "Zadejte prosím relativní port tohoto spojení."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Use this device in layer2 mode?"
msgstr "Použít zařízení v režimu layer2?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
"Karty OSA-Express implicitně používají režim layer3, ve kterém jsou z "
"příchozích IPv4 paketů odstraňovány LLC hlavičky. Používání karty v režimu "
"layer2 zajistí, že budou u IPv4 paketů zachovány MAC adresy."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""
"Nastavený parametr je:\n"
" peer  = ${peer}"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "VM peer:"
msgstr "VM peer:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "Please enter the name of the VM peer you want to connect to."
msgstr "Zadejte jméno VM peeru, ke kterému se chcete připojit."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr ""
"Jestli se chcete připojit k více peerům, oddělte jména dvojtečkami, např. "
"tcpip:linux1. "

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
"Standardní jméno TCP/IP serveru na VM je TCPIP, na VIF $TCPIP. Aby tento "
"ovladač fungoval, musí být v uživatelském VM adresáři povolen IUCV a musí "
"být nastaven na obou koncích komunikace."

#. Type: text
#. Description
#. Main menu item
#. Translators: keep below 55 columns
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "Configure the network device"
msgstr "Nastavit síťové zařízení"