# THIS FILE IS GENERATED AUTOMATICALLY FROM THE D-I PO MASTER FILES
# The master files can be found under packages/po/
#
# DO NOT MODIFY THIS FILE DIRECTLY: SUCH CHANGES WILL BE LOST
#
# translation of debian-installer_packages_po_sublevel1_da.po to
# Danish messages for debian-installer.
# This file is distributed under the same license as debian-installer.
# Joe Hansen <joedalton2@yahoo.dk>, 2011, 2012, 2013, 2014, 2015, 2016.
# Ask Hjorth Larsen <asklarsen@gmail.com>, 2010.
# Mads Bille Lundby <lundbymads@gmail.com, 2009.
# Henrik Christian Grove <debian@3001.dk>, 2008.
# Jesper Dahl Nyerup <debian@jespernyerup.dk>, 2008.
# Jacob Sparre Andersen <jacob@jacob-sparre.dk>, 2008, 2010.
# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2004-2007.
# Reviewed 2007 by Niels Rasmussen
#
# Volume er oversat til diskenhed. Ret hvis Dansk-gruppen finder en anbefaling.
#
# Translations from iso-codes:
# Alastair McKinstry <mckinstry@computer.org>, 2001.
# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2006.
# Claus Hindsgaul <claus_h@image.dk>, 2004, 2005, 2006.
# Computeroversættelse Tobias Toedter <t.toedter@gmx.net>, 2007.
# Copyright (C) Free Software Foundation, Inc., 2006.
# Frederik 'Freso' S. Olesen <freso.dk@gmail.com>, 2008.
# Free Software Foundation, Inc., 2000, 2004, 2005.
# Joe Hansen <joedalton2@yahoo.dk>, 2009, 2010, 2011.
# Keld Simonsen <keld@dkuug.dk>, 2000, 2001.
# Kenneth Christiansen <kenneth@gnu.org>, 2000.
# Ole Laursen <olau@hardworking.dk>, 2001.
#
# vedrørende russisk:
# (bogstavet й bliver normalt til j på dansk og y på engelsk.  Der er
# også nogle forskelle med de mange s/sh-agtige lyde)
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer_packages_po_sublevel1_da\n"
"Report-Msgid-Bugs-To: s390-netdevice@packages.debian.org\n"
"POT-Creation-Date: 2019-09-26 22:05+0000\n"
"PO-Revision-Date: 2016-09-17 20:24+0200\n"
"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
"Language-Team: <dansk@dansk-gruppen.dk>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr "ctc: Channel-to-Channel (CTC) eller ESCON-forbindelse"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr "qeth: OSA-Express i QDIO-tilstand / HiperSockets"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr "iucv: Mellem-bruger kommunikations-transport - kun for VM-gæster"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr "virtio: KVM VirtIO"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr "Netkorts-type:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
"Vælg typen på det primære netkort, som du vil bruge til at installere Debian-"
"systemet fra (via NFS eller HTTP). Kun de viste enheder understøttes."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr "CTC-læseenhed:"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr "Følgende enhedsnumre kan tilhøre CTC- eller ESCON-forbindelser."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr "CTC-skriveenhed:"

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:12001
msgid "Do you accept this configuration?"
msgstr "Vil du acceptere denne opsætning?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""
"De konfigurerede indstillinger er:\n"
" læsekanal     = ${device_read}\n"
" skrivekanal   = ${device_write}\n"
" protokol      = ${protocol}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr "Ingen CTC- eller ESCON-forbindelser"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "Please make sure that you have set them up correctly."
msgstr "Sørg for at du har sat dem korrekt op."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr "Protokol for denne forbindelse:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr "Enhed:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr "Vælg OSA-Express QDIO / HiperSockets-enhed."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"
msgstr ""
"De indstillede parametre er:\n"
" kanaler  = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" lag2     = ${layer2}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr "Ingen OSA-Express QDIO-kort / HiperSockets"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
"Fandt ingen OSA-Express QDIO-kort eller HiperSockets. Hvis du kører VM, så "
"sørg for at dit kort er forbundet til denne gæst."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Port:"
msgstr "Port:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Please enter a relative port for this connection."
msgstr "Angiv en port for denne forbindelse."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Use this device in layer2 mode?"
msgstr "Benyt denne enhed i lag2-tilstand?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
"Som udgangspunkt benytter OSA-Express kort lag3-tilstand. I denne tilstand, "
"fjernes LLC-hoveder fra indkommende IPv4-pakker. Hvis kortet benyttes i lag2-"
"tilstand, bevares IPv4-pakkernes MAC-adresser."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""
"Det opsatte parameter er:\n"
" vært  = ${peer}"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "VM peer:"
msgstr "VM-vært:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "Please enter the name of the VM peer you want to connect to."
msgstr "Angiv navnet på den VM-vært (VM-peer), du vil forbinde til."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr ""
"Hvis du vil forbinde til flere værter, kan du adskille navnene med kolonner, "
"som f.eks. tcpip:linux1."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
"Standardnavnet på en TCP/IP-server på VM er TCPIP, på VIF er det $TCPIP. "
"Bemærk: IUCV skal være aktiveret i VM-brugermappen for at denne driver kan "
"fungere og det skal sættes op i begge ender af kommunikationen."

#. Type: text
#. Description
#. Main menu item
#. Translators: keep below 55 columns
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "Configure the network device"
msgstr "Sæt netkortet op"