Debian-installer 1st-stage master file HR - en to hr translation catalogue (526 entries)

note: Type: error Description :sl2:
en: Installation step failed
hr: Korak instalacije nije uspio

note: Type: error Description :sl2:
en: An installation step failed. You can try to run the failing item again from the menu, or skip it and choose something else. The failing step is: ${ITEM}
hr: Korak instalacije nije uspio. Možete ga pokušati iznova pokrenuti ili ga preskočiti i izabrati nešto drugo. Neuspio korak je: ${ITEM}

note: Type: select Description :sl2:
en: Choose an installation step:
hr: Izaberite korak instalacije:

note: Type: select Description :sl2:
en: This installation step depends on one or more other steps that have not yet been performed.
hr: Ovaj korak instalacije ovisi o jednom ili više drugih koraka koji još nisu učinjeni.

note: Type: note Description :sl2: Type: text
en: Interactive shell
hr: Interaktivna ljuska (shell)

note: Type: note Description :sl2:
en: After this message, you will be running "ash", a Bourne-shell clone.
hr: Nakon ove poruke, naći ćete se u "ash" ljusci, klonu Bourne ljuske.

note: Type: note Description :sl2:
en: The root file system is a RAM disk. The hard disk file systems are mounted on "/target". The editor available to you is nano. It's very small and easy to figure out. To get an idea of what Unix utilities are available to you, use the "help" command.
hr: Korijenski datotečni sustav je RAM disk. Datotečni sustavi tvrdih diskova montirani su na "/target". Na raspolaganju vam je uređivač teksta nano, koji je vrlo malen, ali jednostavan za shvatiti. Da biste doznali koji su vam Unix alati na raspolaganju, upišite "help".

note: Type: note Description :sl2:
en: Use the "exit" command to return to the installation menu.
hr: Koristite naredbu "exit" za povratak u instalacijski izbornik.

note: Type: text Description Main menu item The translation should not exceed 55 columns except for languages that are only supported in the graphical version of the installer :sl2:
en: Exit installer
hr: Izađi iz instalacijskog programa

note: Type: boolean Description :sl2:
en: Are you sure you want to exit now?
hr: Jeste li sigurni da sada želite izaći?

note: Type: boolean Description :sl2:
en: If you have not finished the install, your system may be left in an unusable state.
hr: Ako niste završili instalaciju, sustav će vam možda ostati neupotrebljiv.

note: Type: error Description :sl2:
en: Terminal plugin not available
hr: Nije dostupan priključak za terminal

note: Type: error Description :sl2:
en: This build of the debian-installer requires the terminal plugin in order to display a shell. Unfortunately, this plugin is currently unavailable.
hr: Ovo izdanje instalacijskog programa zahtijeva priključak za terminal kako bi prikazali ljusku (shell). Nažalost, taj priključak trenutno nije dostupan.

note: Type: error Description :sl2:
en: It should be available after reaching the "Loading additional components" installation step.
hr: Trebao bi biti dostupan nakon što se dođe do koraka u instalaciji pod nazivom "Učitavanje dodatnih komponenti".

note: Type: text Description :sl2:
en: Alternatively, you can open a shell by pressing Ctrl+Alt+F2. Use Alt+F5 to get back to the installer.
hr: Alternativno, možete otvoriti ljusku tako da pritisnete Ctrl+Alt+F2. Koristite Alt+F5 za povratak u instalacijski program.

note: Type: multiselect Description :sl2:
en: Installer components to load:
hr: Instalacijski dijelovi za učitavanje:

note: Type: multiselect Description :sl2:
en: All components of the installer needed to complete the install will be loaded automatically and are not listed here. Some other (optional) installer components are shown below. They are probably not necessary, but may be interesting to some users.
hr: Svi dijelovi instalacijskog programa potrebni za završetak instalacije će se automatski učitati i oni nisu na ovom popisu. Ostali, opcionalni dijelovi instalacijskog programa su prikazani ispod. Oni vjerojatno nisu neophodni, ali mogu biti zanimljivi nekim korisnicima.

note: Type: multiselect Description :sl2:
en: Note that if you select a component that requires others, those components will also be loaded.
hr: Obratite pozornost: ako izaberete dio koji zahtijeva druge dijelove, i ti će se dijelovi učitati.

note: Type: multiselect Description :sl2:
en: To save memory, only components that are certainly needed for an install are selected by default. The other installer components are not all necessary for a basic install, but you may need some of them, especially certain kernel modules, so look through the list carefully and select the components you need.
hr: Zbog uštede memorije, samo oni dijelovi instalacije koji su sigurno potrebni za instalaciju su izabrani za učitavanje. Ostali popisani dijelovi nisu neophodni za osnovnu instalaciju, ali ćete možda ipak trebati neke od njih, osobito pojedine module za kernel. Zato pozorno pregledajte popis i izaberite dijelove koji su vam potrebni.

note: Type: error Description :sl2:
en: Failed to load installer component
hr: Učitavanje instalacijskog dijela nije uspjelo

note: Type: error Description :sl2:
en: Loading ${PACKAGE} failed for unknown reasons. Aborting.
hr: Učitavanje ${PACKAGE} nije uspjelo zbog nepoznatih razloga. Prekidam.

note: Type: boolean Description :sl2:
en: Continue the install without loading kernel modules?
hr: Nastavi instalaciju bez učitavanja modula za kernel?

note: Type: boolean Description :sl2:
en: No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of the installer and the kernel version available in the archive.
hr: Nema modula za kernel. Razlog tomu je vjerojatno nepodudarnost inačica jezgre koju koristi instalacija i jezgre dostupne u arhivi.

note: Type: boolean Description :sl2:
en: If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules.
hr: Ako instalirate sa zrcalnog poslužitelja, možete riješiti ovaj problem instalirajući neku drugu inačicu Debiana. Instalacija vjerojatno neće uspjeti ako nastavite bez modula za jezgru.

note: Type: select Description :sl2:
en: System locale:
hr: Parametri lokacije sustava:

note: Type: select Description :sl2:
en: Select the default locale for the installed system.
hr: Molim unesite zadani parametar lokacije (locale) za instalirani sustav.

note: Type: multiselect Description :sl2:
en: Additional locales:
hr: Dodatni parametri lokacije:

note: Type: multiselect Description :sl2:
en: Based on your previous choices, the default locale currently selected for the installed system is '${LOCALE}'.
hr: Na osnovu vaših prethodnih izbora, zadani parametar lokacije (locale) za instalirani sustav jest '${LOCALE}'.

note: Type: multiselect Description :sl2:
en: If you wish to use a different default or to also have other locales available, you may choose additional locales to be installed. If you are unsure it is best to just use the selected default.
hr: Ako želite koristiti različitu početnu vrijednost ili uz ovu imati dostupne i druge parametre lokacije, možete ih izabrati za instalaciju. Ako niste sigurni, najbolje je samo koristiti zadanu vrijednost.

note: Type: note Description :sl2:
en: A locale determines character encoding and contains information on for example currency, date format and alphabetical sort order.
hr: Parametar lokacije (locale) određuje kodiranje znakova i sadrži informacije o npr. valuti, obliku datuma i poretku abecede.

note: Type: select Description :sl2:
en: Keyboard model:
hr: Model tipkovnice:

note: Type: select Description :sl2:
en: Please select the model of the keyboard of this machine.
hr: Molim izaberite vrstu tipkovnice na ovom računalu.

note: Type: select Choices :sl2:
en: No temporary switch
hr: Nema privremene sklopke

note: Type: select Choices :sl2:
en: Both Logo keys
hr: Obje Logo tipke

note: Type: select Description :sl2:
en: Method for temporarily toggling between national and Latin input:
hr: Metoda za privremenu izmjenu između nacionalnog i latinskog unosa:

note: Type: select Description :sl2:
en: When the keyboard is in national mode and one wants to type only a few Latin letters, it might be more appropriate to switch temporarily to Latin mode. The keyboard remains in that mode as long as the chosen key is kept pressed. That key may also be used to input national letters when the keyboard is in Latin mode.
hr: Kad je tipkovnica u nacionalnom načinu rada i pojedinac želi unijeti nekoliko latinskih znakova, bilo bi prikladnije da se privremeno prebaci na latinski način. Tipkovnica ostaje u tom načinu dok god je tipka pritisnuta. Ta se tipka može također koristiti za unos nacionalnih znakova kad je tipkovnica u latinskom načinu.

note: Type: select Description :sl2:
en: You can disable this feature by choosing "No temporary switch".
hr: Možete onemogućiti ovu opciju birajući "Nema privremene sklopke".

note: Type: select Choices :sl2:
en: The default for the keyboard layout
hr: Izbor zadane tipkovnice

note: Type: select Choices :sl2:
en: No AltGr key
hr: Nema AltGr tipke

note: Type: select Choices :sl2:
en: Keypad Enter key
hr: Enter tipka na numeričkom dijelu

note: Type: select Choices :sl2:
en: Both Alt keys
hr: Obje tipke Alt

note: Type: select Description :sl2:
en: Key to function as AltGr:
hr: Tipka koju želite da radi kao AltGr:

note: Type: select Description :sl2:
en: With some keyboard layouts, AltGr is a modifier key used to input some characters, primarily ones that are unusual for the language of the keyboard layout, such as foreign currency symbols and accented letters. These are often printed as an extra symbol on keys.
hr: Kod nekih rasporeda tipkovnice, AltGr je tipka izmjene koja se koristi za unos nekih znakova, prvenstveno onih koji nisu uobičajeni za jezik rasporeda tipkovnice, kao što su simboli za stranu valutu i akcentirana slova. Obično su ispisani kao dodatni simboli na tipkama.

note: Type: select Choices :sl2:
en: No compose key
hr: Nema tipku compose

note: Type: select Description :sl2:
en: Compose key:
hr: Tipka Compose:

note: Type: select Description :sl2:
en: The Compose key (known also as Multi_key) causes the computer to interpret the next few keystrokes as a combination in order to produce a character not found on the keyboard.
hr: Tipka Compose (poznata kao i Multi_key) čini da računalo interpretira idućih nekoliko pritisaka na tipke kao kombinaciju koja služi za stvaranje znaka koji se ne nalazi na tipkovnici.

note: Type: select Description :sl2:
en: On the text console the Compose key does not work in Unicode mode. If not in Unicode mode, regardless of what you choose here, you can always also use the Control+period combination as a Compose key.
hr: U tekstualnoj konzoli u Unicode načinu rada tipka Compose ne radi. Ako niste u Unicode načinu rada, što god ovdje ovdje izaberete, uvijek možete koristiti i kombinaciju Control+točka za tipku Compose.

note: Type: boolean Description :sl2:
en: Load CD-ROM drivers from removable media?
hr: Učitaj CD-ROM upravljačke programe s izmjenjivih medija?

note: Type: boolean Description :sl2:
en: No common CD-ROM drive was detected.
hr: Nije pronađen uobičajeni CD-ROM pogon.

note: Type: boolean Description :sl2:
en: You may need to load additional CD-ROM drivers from removable media, such as a driver floppy. If you have such media available now, insert it, and continue. Otherwise, you will be given the option to manually select CD-ROM modules.
hr: Možda trebate učitati CD-ROM upravljačke programe s izmjenjivih medija, kao što je disketa. Ako imate takve medije, ubacite ih u pogon i nastavite. Ako ne, imat ćete mogućnost ručno izabrati module za CD-ROM.

note: Type: boolean Description :sl2:
en: Manually select a CD-ROM module and device?
hr: Ručno izaberi CD-ROM modul i uređaj?

note: Type: boolean Description :sl2:
en: Your CD-ROM drive may be an old Mitsumi or another non-IDE, non-SCSI CD-ROM drive. In that case you should choose which module to load and the device to use. If you don't know which module and device are needed, look for some documentation or try a network installation instead of a CD-ROM installation.
hr: Možda imate stari Mitsumi CD-ROM, ili koji drugi ne-IDE, ne-SCSI CD-ROM pogon. Ako je tako, trebate odlučiti koji ćete modul i uređaj koristiti. Ako to ne znate, pogledajte u dokumentaciju ili pokušajte instalaciju s mreže umjesto s CD-ROM-a.

note: Type: boolean Description :sl2:
en: Retry mounting the CD-ROM?
hr: Iznova pokušaj montirati CD-ROM?

note: Type: boolean Description :sl2:
en: Your installation CD-ROM couldn't be mounted. This probably means that the CD-ROM was not in the drive. If so you can insert it and try again.
hr: Ne mogu montirati vaš instalacijski CD-ROM, vjerojatno zato što nije u pogonu. Ako je tako, ubacite ga i pokušajte iznova.

note: Type: select Description :sl2:
en: Module needed for accessing the CD-ROM:
hr: Modul potreban za pristup CD-ROM-u:

note: Type: select Description :sl2:
en: The automatic detection didn't find a CD-ROM drive. You can try to load a specific module if you have an unusual CD-ROM drive (that is neither IDE nor SCSI).
hr: Automatska pretraga nije pronašla CD-ROM pogon. Ako imate neuobičajen CD-ROM (niti IDE, niti SCSI), možete pokušati učitati odgovarajući modul.

note: Type: string Description :sl2:
en: Device file for accessing the CD-ROM:
hr: Datoteka uređaja za pristup CD-ROM-u:

note: Type: string Description :sl2:
en: In order to access your CD-ROM drive, please enter the device file that should be used. Non-standard CD-ROM drives use non-standard device files (such as /dev/mcdx).
hr: Molim unesite datoteku uređaja koja će se koristiti za pristup vašem  CD-ROM-u. Neuobičajeni CD-ROM pogoni koriste neuobičajene datoteke uređaja (npr. /dev/mcdx).

note: Type: string Description :sl2:
en: You may switch to the shell on the second terminal (ALT+F2) to check the available devices in /dev with "ls /dev". You can return to this screen by pressing ALT+F1.
hr: Možete se prebaciti u ljusku na drugoj konzoli (Alt+F2) da provjerite koji su uređaji dostupni u /dev, pomoću "ls /dev". Vraćate se na ovaj zaslon pomoću Alt+F1.

note: Type: note Description :sl2:
en: CD-ROM detected
hr: Pronađen CD-ROM

note: Type: note Description :sl2:
en: The CD-ROM autodetection was successful. A CD-ROM drive has been found and it currently contains the CD ${cdname}. The installation will now continue.
hr: Automatsko traženje CD-ROM-a uspjelo. Pronađen je CD-ROM pogon koji sadrži CD ${cdname}. Instalacija će sada nastaviti.

note: Type: error Description :sl2:
en: Incorrect CD-ROM detected
hr: Pronađen krivi CD-ROM

note: Type: error Description :sl2:
en: The CD-ROM drive contains a CD which cannot be used for installation.
hr: CD-ROM pogon sadrži CD koji se ne može koristiti za instalaciju.

note: Type: error Description :sl2:
en: Please insert a suitable CD to continue with the installation.
hr: Molim ubacite prikladni CD da bi nastavili instalaciju.

note: Type: error Description Translators: DO NOT TRANSLATE "Release". This is the name of a file. :sl2:
en: Error reading Release file
hr: Greška pri učitavanju 'Release' datoteke

note: Type: error Description Translators: DO NOT TRANSLATE "Release". This is the name of a file. :sl2:
en: The CD-ROM does not seem to contain a valid 'Release' file, or that file could not be read correctly.
hr: Čini se da CD-ROM ne sadrži ispravnu 'Release' datoteku, ili se ta datoteka ne može ispravno učitati.

note: Type: error Description Translators: DO NOT TRANSLATE "Release". This is the name of a file. :sl2:
en: You may try to repeat CD-ROM detection but, even if it does succeed the second time, you may experience problems later in the installation.
hr: Možete pokušati ponoviti detekciju CD-ROM uređaja, ali čak ako to i uspije iz drugog pokušaja, mogli biste naići na probleme kasnije u instalaciji.

note: Type: text Description Item in the main menu to select this package :sl2:
en: Detect and mount CD-ROM
hr: Pronađi i montiraj CD-ROM

note: Type: select Choices :sl2:
en: no ethernet card
hr: nema mrežne kartice

note: Type: select Choices :sl2: "none of the above" should be understood as "none of the above choices"
en: none of the above
hr: ništa od navedenog

note: Type: select Description :sl2:
en: Driver needed by your Ethernet card:
hr: Upravljački program za vašu mrežnu karticu:

note: Type: select Description :sl2:
en: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list.
hr: Mrežna kartica nije pronađena. Ako znate naziv upravljačkog programa za vašu mrežnu karticu, izaberite ga s popisa.

note: Type: error Description :sl2:
en: Ethernet card not found
hr: Mrežna kartica nije pronađena

note: Type: error Description :sl2:
en: No Ethernet card was found on the system.
hr: Na sustavu nije pronađena mrežna kartica.

note: Type: select Choices :sl2:
en: continue with no disk drive
hr: nastavi bez diskovnog uređaja

note: Type: select Description :sl2:
en: Driver needed for your disk drive:
hr: Upravljački program za vaš diskovni uređaj:

note: Type: select Description :sl2:
en: No disk drive was detected. If you know the name of the driver needed by your disk drive, you can select it from the list.
hr: Diskovni uređaj nije pronađen. Ako znate naziv upravljačkog programa za vaš diskovni uređaj, izaberite ga s popisa.

note: Type: error Description :sl2:
en: No partitionable media
hr: Neodgovarajući medij

note: Type: error Description :sl2:
en: No partitionable media were found.
hr: Nema medija kojeg se može particionirati.

note: Type: error Description :sl2:
en: Please check that a hard disk is attached to this machine.
hr: Molim provjerite je li tvrdi disk spojen na ovo računalo.

note: Type: multiselect Description :sl2:
en: Modules to load:
hr: Moduli za učitavanje:

note: Type: multiselect Description :sl2:
en: The following Linux kernel modules were detected as matching your hardware. If you know some are unnecessary, or cause problems, you can choose not to load them. If you're unsure, you should leave them all selected.
hr: Pronađeni su sljedeći moduli Linuxove jezgre koji odgovaraju vašem sklopovlju. Ako znate da su neki od njih nepotrebni ili problematični, možete odrediti da se ne učitaju. Ako niste sigurni, ostavite ih sve.

note: Type: boolean Description FIXME: not in use and kept just while we're still in doubt it will be needed :sl2:
en: Start PC card services?
hr: Pokrenuti servise PC kartica?

note: Type: boolean Description FIXME: not in use and kept just while we're still in doubt it will be needed :sl2:
en: Please choose whether PC card services should be started in order to allow the use of PCMCIA cards.
hr: Molim izaberite treba li pokrenuti servise za PC card uređaje kako bi omogućili korištenje PCMCIA kartica.

note: Type: string Description :sl2:
en: PCMCIA resource range options:
hr: Mogućnosti opsega PCMCIA izvora:

note: Type: string Description :sl2:
en: Some PCMCIA hardware needs special resource configuration options in order to work, and can cause the computer to freeze otherwise. For example, some Dell laptops need "exclude port 0x800-0x8ff" to be specified here. These options will be added to /etc/pcmcia/config.opts. See the installation manual or the PCMCIA HOWTO for more information.
hr: Neki PCMCIA uređaji trebaju posebna podešenja izvora da bi radila, inače uzrokuju zastoj računala. Primjerice, neki Dell prijenosnici ovdje trebaju zapovijed "exclude port 0x800-0x8ff". Ta će podešenja biti dodana u /etc/pcmcia/config.opts. Pogledajte u instalacijski priručnik ili u PCMCIA KAKO za više obavijesti.

note: Type: string Description :sl2:
en: For most hardware, you do not need to specify anything here.
hr: Za većinu uređaja ovdje ne trebate ništa odrediti.

note: Type: error Description :sl2:
en: Error while running '${CMD_LINE_PARAM}'
hr: Greška pri izvršavanju '${CMD_LINE_PARAM}'

note: Type: boolean Description :sl2:
en: Load missing drivers from removable media?
hr: Učitati nedostajuće upravljačke programe s izmjenjivih medija?

note: Type: boolean Description :sl2:
en: A driver for your hardware is not available. You may need to load drivers from removable media, such as a USB stick, or driver floppy.
hr: Upravljački program za vaš uređaj nije pronađen. Možda trebate učitati odgovarajuće upravljačke programe s izmjenjivih medija, kao što su USB stick ili disketa.

note: Type: boolean Description :sl2:
en: If you have such media available now, insert it, and continue.
hr: Ako imate takav medij, ubacite ga u pogon i nastavite.

note: Type: boolean Description :sl2:
en: Load missing firmware from removable media?
hr: Učitati nedostajući firmware s izmjenjivih medija?

note: Type: boolean Description :sl2:
en: Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
hr: Dio vaših uređaja treba neslobodne firmware datoteke za rad. Firmware se može učitati s izmjenjivih medija kao što su USB stick ili disketa.

note: Type: boolean Description :sl2:
en: The missing firmware files are: ${FILES}
hr: Nedostajuće firmware datoteke su: ${FILES}

note: Type: string Description :sl2:
en: ${iface} is a wireless network interface. Please enter the name (the ESSID) of the wireless network you would like ${iface} to use. If you would like to use any available network, leave this field blank.
hr: ${iface} je bežično mrežno sučelje. Molim unesite ime (ESSID) bežične mreže koju želite da ${iface} koristi. Ako želite koristiti bilo koju dostupnu mrežu, ostavite prazno.

note: Type: select Description :sl2:
en: Wireless network type for ${iface}:
hr: Vrsta bežične mreže za ${iface}:

note: Type: select Description :sl2:
en: Choose WEP/Open if the network is open or secured with WEP. Choose WPA/WPA2 if the network is protected with WPA/WPA2 PSK (Pre-Shared Key).
hr: Izaberite WEP/Otvorena ako je mreža otvorena ili zaštićena WEP-om. Izaberite WPA/WPA2 ako je mreža zaštićena WPA/WPA2 PSK ključem (Pre-Shared Key).

note: Type: string Description :sl2:
en: WEP key for wireless device ${iface}:
hr: WEP ključ za bežični uređaj ${iface}:

note: Type: string Description :sl2:
en: If applicable, please enter the WEP security key for the wireless device ${iface}. There are two ways to do this:
hr: Ako je potrebno, molim unesite sigurnosni WEP ključ za bežični uređaj ${iface}. To možete na dva načina:

note: Type: string Description :sl2:
en: If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', or 'nnnnnnnn', where n is a number, just enter it as it is into this field.
hr: Ako je vaš WEP ključ u obliku 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', ili 'nnnnnnnn', gdje je n broj, samo ga unesite u ovo polje kakav jest.

note: Type: string Description :sl2:
en: If your WEP key is in the format of a passphrase, prefix it with 's:' (without quotes).
hr: Ako je vaš WEP ključ u obliku lozinke, dodajte mu 's:' na početak (bez navodnika).

note: Type: string Description :sl2:
en: Of course, if there is no WEP key for your wireless network, leave this field blank.
hr: Naravno, ako nema WEP ključa za vašu bežičnu mrežu, ostavite prazno.

note: Type: error Description :sl2:
en: Invalid WEP key
hr: Neispravan WEP ključ

note: Type: error Description :sl2:
en: The WEP key '${wepkey}' is invalid. Please refer to the instructions on the next screen carefully on how to enter your WEP key correctly, and try again.
hr: WEP ključ '${wepkey}' nije ispravan. Molim, pozorno pročitajte naputak na sljedećem zaslonu kako ispravno unijeti WEP ključ i pokušajte iznova.

note: Type: error Description :sl2:
en: Invalid passphrase
hr: Neispravna lozinka

note: Type: error Description :sl2:
en: The WPA/WPA2 PSK passphrase was either too long (more than 64 characters) or too short (less than 8 characters).
hr: WPA/WPA2 PSK lozinka je ili predugačka (više od 64 znaka) ili prekratka (manje od 8 znakova).

note: Type: string Description :sl2:
en: WPA/WPA2 passphrase for wireless device ${iface}:
hr: WPA/WPA2 lozinka za bežični uređaj ${iface}:

note: Type: string Description :sl2:
en: Enter the passphrase for WPA/WPA2 PSK authentication. This should be the passphrase defined for the wireless network you are trying to use.
hr: Unesite lozinku za WPA/WPA2 PSK provjeru podataka. Ovo bi trebala biti lozinka definirana za bežičnu mrežu na koju se pokušavate spojiti.

note: Type: error Description :sl2:
en: Invalid ESSID
hr: Neispravan ESSID

note: Type: error Description :sl2:
en: The ESSID "${essid}" is invalid. ESSIDs may only be up to ${max_essid_len} characters, but may contain all kinds of characters.
hr: ESSID "${essid}" nije ispravan. ESSID može biti veličine do ${max_essid_len} znaka i može sadržavati sve vrste znakova.

note: Type: text Description :sl2:
en: Attempting to exchange keys with the access point...
hr: Pokušavam razmijeniti ključeve s pristupnom točkom...

note: Type: text Description :sl2:
en: WPA/WPA2 connection succeeded
hr: WPA/WPA2 spajanje uspješno

note: Type: note Description :sl2:
en: Failure of key exchange and association
hr: Neuspješna razmjena ključeva i pridruživanje

note: Type: note Description :sl2:
en: The exchange of keys and association with the access point failed. Please check the WPA/WPA2 parameters you provided.
hr: Razmjena ključeva i pridruživanje pristupnoj točki nije uspjelo. Molim provjerite WPA/WPA2 parametre koje ste unijeli.

note: Type: error Description :sl2:
en: Invalid hostname
hr: Neispravno ime računala

note: Type: error Description :sl2:
en: The name "${hostname}" is invalid.
hr: Ime "${hostname}" nije ispravno.

note: Type: error Description :sl2:
en: A valid hostname may contain only the numbers 0-9, upper and lowercase letters (A-Z and a-z), and the minus sign. It must be at most ${maxhostnamelen} characters long, and may not begin or end with a minus sign.
hr: Ispravno ime računala može sadržavati samo brojke 0-9, mala i velika slova (a-z i A-Z) te znak minusa. Mora biti dugačko najviše ${maxhostnamelen} znakova i ne smije započinjati ili završavati s minusom.

note: Type: error Description :sl2:
en: Error
hr: Greška

note: Type: error Description :sl2:
en: An error occurred and the network configuration process has been aborted. You may retry it from the installation main menu.
hr: Pojavila se greška i postupak podešavanja mreže je prekinut. Možete pokušati ponovo iz glavnog instalacijskog izbornika.

note: Type: error Description :sl2:
en: No network interfaces detected
hr: Nema mrežnih sučelja

note: Type: error Description :sl2:
en: No network interfaces were found. The installation system was unable to find a network device.
hr: Nisu pronađena mrežna sučelja. Instalacijski sustav nije mogao pronaći mrežni uređaj.

note: Type: error Description :sl2:
en: You may need to load a specific module for your network card, if you have one. For this, go back to the network hardware detection step.
hr: Možda trebate učitati poseban modul za vašu mrežnu karticu, ako je imate. Za to se vratite natrag na korak traženja mrežnih uređaja.

note: Type: note Description A "kill switch" is a physical switch found on some network cards that disables the card. :sl2:
en: Kill switch enabled on ${iface}
hr: "Kill" prekidač upaljen na ${iface}

note: Type: note Description A "kill switch" is a physical switch found on some network cards that disables the card. :sl2:
en: ${iface} appears to have been disabled by means of a physical "kill switch". If you intend to use this interface, please switch it on before continuing.
hr: Čini se da je uređaj ${iface} onemogućen korištenjem fizičkog "kill" prekidača. Ako namjeravate koristiti ovo sučelje, molim upalite ga prije nego li nastavite.

note: Type: select Choices :sl2: Note to translators : Please keep your translations of each choice below the 65 columns limit (which means 65 characters for most languages) Choices MUST be separated by commas You MUST use standard commas not special commas for your language You MUST NOT use commas inside
en: Infrastructure (Managed) network
hr: Upravljana (infrastrukturna) mreža

note: Type: select Choices :sl2: Note to translators : Please keep your translations of each choice below the 65 columns limit (which means 65 characters for most languages) Choices MUST be separated by commas You MUST use standard commas not special commas for your language You MUST NOT use commas inside
en: Ad-hoc network (Peer to peer)
hr: Ad-hoc (peer-to-peer) mreža

note: Type: text Description :sl2:
en: Wireless network configuration
hr: Podešavanje bežične mreže

note: Type: text Description :sl2:
en: Searching for wireless access points...
hr: Tražim bežične točke pristupa...

note: Type: text Description :sl2:
en: <none>
hr: <nema>

note: Type: text Description :sl2:
en: Wireless ethernet (802.11x)
hr: Bežični ethernet (802.11x)

note: Type: text Description :sl2:
en: wireless
hr: bežična

note: Type: text Description :sl2:
en: USB net
hr: USB mreža

note: Type: text Description :sl2:
en: Serial-line IP
hr: Serijska-linija IP

note: Type: text Description :sl2:
en: Parallel-port IP
hr: Paralelni-port IP

note: Type: text Description :sl2:
en: Point-to-Point Protocol
hr: Point-to-point protokol

note: Type: text Description :sl2:
en: IPv6-in-IPv4
hr: IPv6-u-IPv4

note: Type: text Description :sl2:
en: ISDN Point-to-Point Protocol
hr: ISDN point-to-point protokol

note: Type: text Description :sl2:
en: Real channel-to-channel
hr: Stvarni channel-to-channel

note: Type: text Description :sl2:
en: Inter-user communication vehicle
hr: Međukorisničko komunikacijsko sredstvo

note: Type: text Description :sl2:
en: Unknown interface
hr: Nepoznato sučelje

note: Type: error Description :sl2:
en: No DHCP client found
hr: Nema DHCP klijenta

note: Type: error Description :sl2:
en: No DHCP client was found. This package requires pump or dhcp-client.
hr: DHCP klijent nije pronađen. Ovaj paket zahtijeva pump ili dhcp-client.

note: Type: error Description :sl2:
en: The DHCP configuration process has been aborted.
hr: Postupak DHCP podešavanja je prekinut.

note: Type: boolean Description :sl2:
en: Continue without a default route?
hr: Nastavi bez zadanog puta?

note: Type: boolean Description :sl2:
en: The network autoconfiguration was successful. However, no default route was set: the system does not know how to communicate with hosts on the Internet. This will make it impossible to continue with the installation unless you have the first installation CD-ROM, a 'Netinst' CD-ROM, or packages available on the local network.
hr: Automatsko podešavanje mreže je uspjelo. Međutim, nije postavljen zadani put (default route): sustav ne zna kako komunicirati s računalima na Internetu. Zbog toga nećete moći nastaviti instalaciju, osim ako nemate prvi službeni Debianov instalacijski CD-ROM, 'Netinst' CD-ROM ili pakete dostupne na lokalnoj mreži.

note: Type: boolean Description :sl2:
en: If you are unsure, you should not continue without a default route: contact your local network administrator about this problem.
hr: Ako niste sigurni, ne biste trebali nastaviti bez zadanog puta: obratite se svom mrežnom administratoru zbog tog problema.

note: Type: text Description IPv6 :sl2:
en: Attempting IPv6 autoconfiguration...
hr: Započinjem IPv6 automatsko podešavanje...

note: Type: text Description IPv6 :sl2:
en: Waiting for link-local address...
hr: Čekam vezu-lokalnu adresu...

note: Type: text Description :sl2:
en: Configuring the network with DHCPv6
hr: Podešavam mrežu pomoću DHCPv6

note: Type: error Description IPv6 :sl2:
en: Malformed IP address
hr: Neispravna IP adresa

note: Type: error Description IPv6 :sl2:
en: The IP address you provided is malformed. It should be in the form x.x.x.x where each 'x' is no larger than 255 (an IPv4 address), or a sequence of blocks of hexadecimal digits separated by colons (an IPv6 address). Please try again.
hr: IP adresa koju ste upisali nije ispravna. Mora biti u obliku 'x.x.x.x' gdje niti jedan 'x' ne može biti veći od 255 (IPv4 adresa), ili niz blokova heksadekadskih znakova odvojenih dvotočjima (IPv6 adresa). Molim pokušajte iznova.

note: Type: string Description :sl2:
en: Point-to-point address:
hr: Point-to-point adresa:

note: Type: string Description :sl2:
en: The point-to-point address is used to determine the other endpoint of the point to point network.  Consult your network administrator if you do not know the value.  The point-to-point address should be entered as four numbers separated by periods.
hr: Point-to-point adresa se koristi za određivanje druge krajnje točke 'point-to-point' mreže. Obratite se svom mrežnom administratoru ako je ne znate. Point-to-point adresa se sastoji od četiri broja, odvojena točkama.

note: Type: error Description :sl2:
en: Unreachable gateway
hr: Nedostupan gateway

note: Type: error Description :sl2:
en: The gateway address you entered is unreachable.
hr: Adresa gatewaya koju ste unijeli nije dostupna.

note: Type: error Description :sl2:
en: You may have made an error entering your IP address, netmask and/or gateway.
hr: Možda ste pogriješili unoseći IP adresu, mrežnu masku i/ili gateway.

note: Type: select Description :sl2:
en: Debian version to install:
hr: Inačica Debiana za instalaciju:

note: Type: select Description :sl2:
en: Debian comes in several flavors. Stable is well-tested and rarely changes. Unstable is untested and frequently changing. Testing is a middle ground, that receives many of the new versions from unstable if they are not too buggy.
hr: Debian dolazi u nekoliko distribucija. Stabilna je dobro provjerena i rijetko se mijenja. Nestabilna je neprovjerena i mijenja se često. Testirajuća je u sredini, pa sadrži većinu novih inačica paketa iz nestabilne, ako nemaju previše bugova.

note: Type: select Description :sl2:
en: Only flavors available on the selected mirror are listed.
hr: Na popisu su samo distribucije dostupne na izabranom zrcalnom poslužitelju.

note: Type: boolean Description :sl2:
en: Go back and try a different mirror?
hr: Vrati se i pokušaj drugi zrcalni poslužitelj?

note: Type: boolean Description :sl2:
en: The specified (default) Debian version (${RELEASE}) is not available from the selected mirror. It is possible to continue and select a different release for your installation, but normally you should go back and select a different mirror that does support the correct version.
hr: Izabrana (predodređena) inačica Debiana (${RELEASE}) nije dostupna na izabranom zrcalnom poslužitelju. Moguće je nastaviti i izabrati drugu inačicu za vašu instalaciju, ali u pravilu biste se trebali vratiti i izabrati drugi poslužitelj koji podržava ispravnu inačicu.

note: Type: error Description :sl2:
en: Bad archive mirror
hr: Neispravan zrcalni poslužitelj Debianove arhive

note: Type: error Description :sl2:
en: An error has been detected while trying to use the specified Debian archive mirror.
hr: Otkrivena je greška pri pokušaju korištenja zadanog zrcalnog poslužitelja Debian arhive.

note: Type: error Description :sl2:
en: Possible reasons for the error are: incorrect mirror specified; mirror is not available (possibly due to an unreliable network connection); mirror is broken (for example because an invalid Release file was found); mirror does not support the correct Debian version.
hr: Mogući razlozi ove greške su: izbor neispravnog zrcalnog poslužitelja, poslužitelj nije dostupan (moguće zbog nepouzdane mrežne veze), zrcalni poslužitelj nije ispravan (npr. jer je na njemu pronađena neispravna "Release" datoteka), zrcalni poslužitelj ne podržava ispravnu inačicu Debiana.

note: Type: error Description :sl2:
en: Additional details may be available in /var/log/syslog or on virtual console 4.
hr: Dodatne pojedinosti mogu biti dostupni u /var/log/syslog ili na virtualnoj konzoli br. 4.

note: Type: error Description :sl2:
en: Please check the specified mirror or try a different one.
hr: Molim provjerite izabrani poslužitelj ili probajte neki drugi.

note: Type: text Description :sl2:
en: oldstable
hr: zastarjela stabilna

note: Type: text Description :sl2:
en: stable
hr: stabilna

note: Type: text Description :sl2:
en: testing
hr: testirajuća

note: Type: text Description :sl2:
en: unstable
hr: nestabilna

note: Type: string Description :sl2:
en: Debian archive mirror directory:
hr: Direktorij zrcalne Debianove arhive:

note: Type: string Description :sl2:
en: Please enter the directory in which the mirror of the Debian archive is located.
hr: Molim unesite direktorij u kojemu se nalazi zrcalna Debianova arhiva.

note: Type: string Description :sl2:
en: FTP proxy information (blank for none):
hr: FTP proxy postavke (prazno ako nema):

note: Type: string Description :sl2:
en: If you need to use a FTP proxy to access the outside world, enter the proxy information here. Otherwise, leave this blank.
hr: Ako morate koristiti FTP proxy da dosegnete vanjski svijet, molim unesite informacije o tom proxyu. Ako ne, ostavite prazno.

note: Type: select Default Translators, you should put here the ISO 3166 code of a country which you know hosts at least one Debian FTP mirror. Please check that the country really has a Debian FTP mirror before putting a random value here First check that the country you mention here is listed in http://
en: US[ Default value for ftp]
hr: HR

note: Type: select Description :sl2:
en: Protocol for file downloads:
hr: Protokol za skidanje datoteka:

note: Type: select Description :sl2:
en: Please select the protocol to be used for downloading files. If unsure, select "http"; it is less prone to problems involving firewalls.
hr: Molim izaberite mrežni protokol za skidanje datoteka. Ako niste sigurni, izaberite "http", manje je sklon problemima s vatrozidima.

note: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# Type: select Choices These are choices of actions so this is, at least in English, an infinitive form :sl2: #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-#
en: Retry
hr: Pokušati ponovo

note: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# Type: select Choices These are choices of actions so this is, at least in English, an infinitive form :sl2: #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-#
en: Change mirror
hr: Promijeni zrcalni poslužitelj

note: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# Type: select Description :sl2: #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-#
en: Downloading a file failed:
hr: Skidanje datoteke nije uspjelo:

note: Type: select Description :sl2:
en: The installer failed to download a file from the mirror. This may be a problem with your network, or with the mirror. You can choose to retry the download, select a different mirror, or cancel and choose another installation method.
hr: Instalacijski program nije uspio skinuti datoteku sa zrcalnog poslužitelja. Možda je problem u vašoj mreži ili na zrcalnom poslužitelju. Možete pokušati iznova, izabrati drugi poslužitelj ili otkazati i pokušati koji drugi način instalacije.

note: Type: boolean Description :sl2:
en: Failed to copy file from CD-ROM. Retry?
hr: Kopiranje datoteke s CD-a nije uspjelo. Pokušati opet?

note: Type: boolean Description :sl2:
en: There was a problem reading data from the CD-ROM. Please make sure it is in the drive. If retrying does not work, you should check the integrity of your CD-ROM.
hr: Pojavio se problem u čitanju podataka s CD-ROM-a. Molim provjerite je li u pogonu. Ako ponovni pokušaj ne uspije, trebali biste provjeriti potpunost svoga CD-ROM-a.

note: Type: text Description :sl2:
en: Scanning removable media
hr: Pregledavam izmjenjive medije

note: Type: text Description :sl2:
en: Cannot read removable media, or no drivers found.
hr: Ne mogu pročitati izmjenjivi medij ili nema upravljačkih programa.

note: Type: text Description :sl2:
en: There was a problem reading data from the removable media. Please make sure that the right media is present. If you continue to have trouble, your removable media might be bad.
hr: Pojavio se problem u čitanju podataka s izmjenjivog medija. Molim provjerite je li pravi uređaj u pogonu. Ako se problemi nastave, možda imate neispravan medij.

note: Type: error Description :sl2:
en: Device in use
hr: Uređaj u upotrebi

note: Type: error Description :sl2:
en: No modifications can be made to the device ${DEVICE} for the following reasons:
hr: Ne mogu se raditi promjene na uređaju ${DEVICE} zbog sljedećih razloga:

note: Type: error Description :sl2:
en: Partition in use
hr: Particija u upotrebi

note: Type: error Description :sl2: This should be translated as "partition *number* ${PARTITION}" In short, ${PARTITION} will indeed contain the partition NUMBER and not the partition NAME
en: No modifications can be made to the partition #${PARTITION} of device ${DEVICE} for the following reasons:
hr: Particija br. ${PARTITION} uređaja ${DEVICE} se ne može mijenjati zbog sljedećih razloga:

note: Type: boolean Description :sl2:
en: Continue with the installation?
hr: Nastavi s instalacijom?

note: Type: boolean Description :sl2:
en: No partition table changes and no creation of file systems have been planned.
hr: Nisu planirane promjene particijskih tablica niti stvaranje datotečnih sustava.

note: Type: boolean Description :sl2:
en: If you plan on using already created file systems, be aware that existing files may prevent the successful installation of the base system.
hr: Ako planirate koristiti već postojeće datotečne sustave, znajte da stare datoteke mogu spriječiti uspješnu instalaciju osnovnog sustava.

note: Type: text Description :sl2:
en: The following partitions are going to be formatted:
hr: Sljedeće particije će se formatirati:

note: Type: text Description :sl2: for example: "partition #6 of IDE0 master as ext3 journaling file system"
en: partition #${PARTITION} of ${DEVICE} as ${TYPE}
hr: particija #${PARTITION} na ${DEVICE} kao ${TYPE}

note: Type: text Description :sl2: for devices which have no partitions for example: "LVM VG Debian, LV Root as ext3 journaling file system"
en: ${DEVICE} as ${TYPE}
hr: ${DEVICE} kao ${TYPE}

note: Type: text Description :sl2:
en: The partition tables of the following devices are changed:
hr: Promijenjene su particijske tablice sljedećih uređaja:

note: Type: select Description :sl2:
en: What to do with this device:
hr: Što učiniti s ovim uređajem:

note: Type: select Description :sl2:
en: How to use this free space:
hr: Kako koristiti ovaj slobodan prostor:

note: Type: select Description :sl2:
en: Partition settings:
hr: Postavke particije:

note: Type: select Description :sl2:
en: You are editing partition #${PARTITION} of ${DEVICE}. ${OTHERINFO} ${DESTROYED}
hr: Podešavate particiju #${PARTITION} na ${DEVICE}. ${OTHERINFO} ${DESTROYED}

note: Type: text Description :sl2:
en: This partition is formatted with the ${FILESYSTEM}.
hr: Ova particija formatirana je kao ${FILESYSTEM}.

note: Type: text Description :sl2:
en: No existing file system was detected in this partition.
hr: Na ovoj particiji nema postojećeg datotečnog sustava.

note: Type: text Description :sl2:
en: All data in it WILL BE DESTROYED!
hr: Svi će podaci biti uništeni!

note: Type: note Description :sl2:
en: The partition starts from ${FROMCHS} and ends at ${TOCHS}.
hr: Particija počinje na ${FROMCHS}, a završava na ${TOCHS}.

note: Type: note Description :sl2:
en: The free space starts from ${FROMCHS} and ends at ${TOCHS}.
hr: Slobodan prostor počinje na ${FROMCHS}, a završava na ${TOCHS}.

note: Type: text Description :sl2:
en: Show Cylinder/Head/Sector information
hr: Prikaži obavijesti o cilindrima/glavama/sektorima

note: Type: text Description :sl2:
en: Done setting up the partition
hr: Podešavanje particije završeno

note: Type: text Description :sl2:
en: Dump partition info in %s
hr: Spremi informacije o particijama u %s

note: #-#-#-#-#  templates.pot (partman-auto)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# :sl3:
en: Failed to partition the selected disk
hr: Particioniranje izabranog diska nije uspjelo

note: Type: error Description :sl2:
en: This probably happened because the selected disk or free space is too small to be automatically partitioned.
hr: To se dogodilo vjerojatno zato što su izabrani disk ili slobodan prostor premali za automatsko particioniranje.

note: Type: error Description :sl2:
en: This probably happened because there are too many (primary) partitions in the partition table.
hr: To se dogodilo vjerojatno zato što ima previše (primarnih) particija u particijskoj tablici.

note: Type: error Description :sl2:
en: Unusable free space
hr: Neupotrebljiv prostor

note: Type: error Description :sl2:
en: Partitioning failed because the chosen free space may not be used. There are probably too many (primary) partitions in the partition table.
hr: Particioniranje nije uspjelo jer se izabrani slobodni prostor ne može koristiti. Vjerojatno ima previše (primarnih) particija u particijskoj tablici.

note: Type: text Description :sl2: TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
en: Small-disk (< 1GB) partitioning scheme
hr: Shema particioniranja za male diskove (<1GB)

note: Type: boolean Description :sl2:
en: Go back to the menu?
hr: Vrati se natrag u izbornik?

note: Type: boolean Description :sl2:
en: No file system is specified for partition #${PARTITION} of ${DEVICE}.
hr: Nije određen datotečni sustav za particiju #${PARTITION} uređaja ${DEVICE}.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and assign a file system to this partition, it won't be used at all.
hr: Ako se ne vratite u izbornik particioniranja i ne odredite datotečni sustav toj particiji, ona se uopće neće koristiti.

note: Type: text Description :sl2:
en: do not use the partition
hr: ne koristi particiju

note: Type: text Description up to 25 character positions :sl2:
en: Format the partition:
hr: Formatiraj particiju:

note: Type: text Description :sl2:
en: yes, format it
hr: da, formatiraj

note: Type: text Description :sl2:
en: no, keep existing data
hr: ne, zadrži postojeće podatke

note: Type: text Description :sl2:
en: do not use
hr: ne koristi

note: Type: text Description :sl2:
en: format the partition
hr: formatiraj particiju

note: Type: text Description :sl2:
en: keep and use the existing data
hr: zadrži i koristi postojeće podatke

note: Type: text Description :sl2:
en: Resizing partition...
hr: Mijenjam veličinu particije...

note: Type: error Description :sl2:
en: The resize operation is impossible
hr: Promjena veličine nije moguća.

note: Type: error Description :sl2:
en: Because of an unknown reason it is impossible to resize this partition.
hr: Zbog nepoznatog razloga nije moguće promijeniti veličinu ove particije.

note: #-#-#-#-#  templates.pot (partman-partitioning)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# Type: boolean :sl4: #-#-#-#-#  templates.pot (grub-installer)  #-#-#-#-# :sl3: #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-# #-#-#-#-#  templates.pot (
en: Check /var/log/syslog or see virtual console 4 for the details.
hr: Za pojedinosti provjerite /var/log/syslog ili četvrtu konzolu.

note: Type: boolean Description :sl2:
en: Write previous changes to disk and continue?
hr: Zapiši promjene na diskove i nastavi?

note: Type: boolean Description :sl2:
en: Before you can select a new partition size, any previous changes have to be written to disk.
hr: Sve prethodne promjene moraju biti zapisane na disk prije nego što izaberete novu veličinu particije.

note: Type: boolean Description :sl2:
en: You cannot undo this operation.
hr: Ovaj postupak ne možete poništiti.

note: Type: boolean Description :sl2:
en: Please note that the resize operation may take a long time.
hr: Molim uzmite u obzir da postupak promjene veličine može potrajati.

note: Type: string Description :sl2:
en: New partition size:
hr: Nova veličina particije:

note: Type: string Description :sl2:
en: The minimum size for this partition is ${MINSIZE} (or ${PERCENT}) and its maximum size is ${MAXSIZE}.
hr: Najmanji raspoloživi prostor koji možete koristiti je ${MINSIZE} (ili ${PERCENT}), a najveći ${MAXSIZE}.

note: Type: string Description :sl2:
en: Hint: "max" can be used as a shortcut to specify the maximum size, or enter a percentage (e.g. "20%") to use that percentage of the maximum size.
hr: Savjet: "max" se može koristiti kao kratica za maksimalnu veličinu. Možete i unijeti postotak (npr. "20%") kao postotni dio te veličine.

note: Type: error Description :sl2:
en: The size entered is invalid
hr: Veličina koju ste unijeli nije ispravna.

note: Type: error Description :sl2:
en: The size you entered was not understood. Please enter a positive integer size followed by an optional unit of measure (e.g. "200 GB"). The default unit of measure is the megabyte.
hr: Veličina koju ste unijeli nije uspješno obrađena. Molim unesite pozitivni cijeli broj i opcionalnu jedinicu mjere, npr. "200 GB". Podrazumijevana jedinica mjere je megabajt.

note: Type: error Description :sl2:
en: The size entered is too large
hr: Unesena veličina je prevelika

note: Type: error Description :sl2:
en: The size you entered is larger than the maximum size of the partition. Please enter a smaller size to continue.
hr: Veličina koju ste unijeli veća je od maksimalne veličine particije. Molim unesite manju veličinu kako biste nastavili.

note: Type: error Description :sl2:
en: The size entered is too small
hr: Unesena veličina je premala

note: Type: error Description :sl2:
en: The size you entered is smaller than the minimum size of the partition. Please enter a larger size to continue.
hr: Veličina koju ste unijeli je manja od minimalne veličine particije. Molim unesite veću veličinu kako bi nastavili.

note: Type: error Description :sl2:
en: Resize operation failure
hr: Mijenjanje veličine nije uspjelo

note: #-#-#-#-#  templates.pot (partman-partitioning)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# :sl3:
en: An error occurred while writing the changes to the storage devices.
hr: Dogodila se greška pri zapisivanju promjena na uređaje za pohranu.

note: Type: error Description :sl2:
en: The resize operation has been aborted.
hr: Postupaka mijenjanja veličine je prekinut.

note: Type: string Description :sl2:
en: The maximum size for this partition is ${MAXSIZE}.
hr: Najveći prostor za ovu particiju je ${MAXSIZE}.

note: Type: error Description :sl2:
en: Invalid size
hr: Neispravna veličina

note: Type: multiselect Description :sl2:
en: Flags for the new partition:
hr: Zastavice nove particije:

note: Type: string Description :sl2:
en: Partition name:
hr: Naziv particije:

note: Type: boolean Description :sl2:
en: Continue with partitioning?
hr: Nastaviti s particioniranjem?

note: Type: boolean Description :sl2:
en: This partitioner doesn't have information about the default type of the partition tables on your architecture.  Please send an e-mail message to debian-boot@lists.debian.org with information.
hr: Ovaj program ne zna odrediti odgovarajuću vrstu particijske tablice za vašu arhitekturu. Molim pošaljite obavijest o tome e-poštom na debian-boot@lists.debian.org .

note: Type: boolean Description :sl2:
en: Please note that if the type of the partition table is unsupported by libparted, then this partitioner will not work properly.
hr: Ako vrsta particijske tablice nije podržana u 'libparted', ovaj program za particioniranje neće ispravno raditi.

note: Type: boolean Description :sl2:
en: This partitioner is based on the library libparted which doesn't have support for the partition tables used on your architecture.  It is strongly recommended that you exit this partitioner.
hr: Ovaj program za particioniranje temelji se na 'libparted' biblioteci koja ne podržava particijsku tablicu potrebnu za vrstu vašeg računala. Morate prekinuti s radom.

note: Type: boolean Description :sl2:
en: If you can, please help to add support for your partition table type to libparted.
hr: Ako možete, molim pomozite da dodamo podršku za vašu vrstu particijske tablice u libparted.

note: Type: select Description :sl2:
en: Partition table type:
hr: Vrsta particijske tablice:

note: Type: select Description :sl2:
en: Select the type of partition table to use.
hr: Izaberite vrstu particijske tablice:

note: Type: boolean Description :sl2:
en: Create new empty partition table on this device?
hr: Načiniti novu praznu particijsku tablicu na ovom uređaju?

note: Type: boolean Description :sl2:
en: You have selected an entire device to partition. If you proceed with creating a new partition table on the device, then all current partitions will be removed.
hr: Izabrali ste cijeli uređaj za particioniranje. Ako nastavite sa stvaranjem nove particijske tablice, sve postojeće particije će se ukloniti.

note: Type: boolean Description :sl2:
en: Note that you will be able to undo this operation later if you wish.
hr: Primijetite da ćete kasnije moći poništiti promjene.

note: Type: boolean Description :sl2:
en: Write a new empty partition table?
hr: Zapiši novu praznu particijsku tablicu?

note: Type: boolean Description :sl2:
en: Because of limitations in the current implementation of the Sun partition tables in libparted, the newly created partition table has to be written to the disk immediately.
hr: Zbog ograničenja u podržavanju Sunove particijske tablice u trenutnoj inačici libparted-a, nova particijska tablica mora odmah biti zapisana na disk.

note: Type: boolean Description :sl2:
en: You will NOT be able to undo this operation later and all existing data on the disk will be irreversibly removed.
hr: Taj postupak NEĆETE moći poništiti kasnije i svi će postojeći podaci na disku biti nepovratno uklonjeni.

note: Type: boolean Description :sl2:
en: Confirm whether you actually want to create a new partition table and write it to disk.
hr: Potvrdite želite li zaista stvoriti novu particijsku tablicu i zapisati je na disk.

note: Type: boolean Description :sl2:
en: Are you sure you want a bootable logical partition?
hr: Jeste li sigurni da želite logičku particiju s oznakom 'bootable'?

note: Type: boolean Description :sl2:
en: You are trying to set the bootable flag on a logical partition. The bootable flag is generally only useful on primary partitions, so setting it on logical partitions is normally discouraged. Some BIOS versions are known to fail to boot if there is no bootable primary partition.
hr: Pokušavate postaviti oznaku 'bootable' na logičkoj particiji. Ta oznaka je općenito korisna samo na primarnim particijama, tako da se ne preporučuje postavljati je na logičkim particijama. Poznato je da neke verzije BIOS-a ne uspijevaju podići sustav ako ne postoje primarne particije s 'bootable' oznakom.

note: Type: boolean Description :sl2:
en: However, if you are sure that your BIOS does not have this problem, or if you are using a custom boot manager that pays attention to bootable logical partitions, then setting this flag may make sense.
hr: Ipak, ako ste sigurni da vaš BIOS nema takav problem, ili ako koristite posebni upravljač procesom dizanja sustava koji obraća pažnju na logičke particije označene kao 'bootable', postavljanje ove oznake može imati smisla.

note: Type: text Description :sl2:
en: Set the partition flags
hr: Postavite particijske zastavice

note: Type: text Description :sl2:
en: Name:
hr: Naziv:

note: Type: text Description :sl2:
en: Bootable flag:
hr: Bootable zastavica:

note: Type: text Description :sl2:
en: on
hr: da

note: Type: text Description :sl2:
en: off
hr: ne

note: Type: text Description :sl2:
en: Resize the partition (currently ${SIZE})
hr: Promijeni veličinu particije (trenutno ${SIZE})

note: Type: text Description :sl2:
en: Delete the partition
hr: Obriši particiju

note: Type: text Description :sl2:
en: Create a new partition
hr: Načini novu particiju

note: Type: text Description :sl2:
en: Create a new empty partition table on this device
hr: Načini novu praznu particijsku tablicu na ovom uređaju

note: Type: boolean Description :sl2:
en: Go back to the menu and correct errors?
hr: Vrati se u izbornik i ispravi pogreške?

note: Type: boolean Description :sl2:
en: The test of the file system with type ${TYPE} in partition #${PARTITION} of ${DEVICE} found uncorrected errors.
hr: Provjera datotečnog sustava vrste ${TYPE} na particiji #${PARTITION} uređaja ${DEVICE} otkrila je neispravljene pogreške.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and correct these errors, the partition will be used as is.
hr: Ako se ne vratite u izbornik particioniranja i ne ispravite pogreške, ta će se particija koristiti kakva jest.

note: Type: boolean Description :sl2:
en: The test of the swap space in partition #${PARTITION} of ${DEVICE} found uncorrected errors.
hr: Provjera swap prostora na particiji #${PARTITION} uređaja ${DEVICE} otkrila je neispravljene pogreške.

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: boolean Description :sl2: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
en: Do you want to return to the partitioning menu?
hr: Želite li se vratiti u izbornik particioniranja?

note: Type: boolean Description :sl2:
en: You have not selected any partitions for use as swap space. Enabling swap space is recommended so that the system can make better use of the available physical memory, and so that it behaves better when physical memory is scarce. You may experience installation problems if you do not have enough physical memory.
hr: Niste izabrali nijednu particiju za korištenje kao swap prostor. Korištenje swap prostora se preporučuje tako da sustav može bolje iskorištavati dostupnu fizičku memoriju i zato da bi se bolje ponašao kada fizičke memorije ponestane. Mogli biste naići na probleme u instalaciji ako nemate dovoljno fizičke memorije.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and assign a swap partition, the installation will continue without swap space.
hr: Ako se ne vratite u izbornik particioniranja i ne odredite swap particiju, instalacijski proces će se nastaviti bez swap prostora.

note: Type: error Description :sl2:
en: Failed to create a file system
hr: Stvaranje datotečnog sustava nije uspjelo

note: Type: error Description :sl2:
en: The ${TYPE} file system creation in partition #${PARTITION} of ${DEVICE} failed.
hr: Stvaranje datotečnog sustava vrste ${TYPE} na particiji #${PARTITION} uređaja ${DEVICE} nije uspjelo.

note: Type: error Description :sl2:
en: Failed to create a swap space
hr: Stvaranje swap prostora nije uspjelo

note: Type: error Description :sl2:
en: The creation of swap space in partition #${PARTITION} of ${DEVICE} failed.
hr: Stvaranje swap prostora na particiji #${PARTITION} uređaja ${DEVICE} nije uspjelo.

note: Type: boolean Description :sl2:
en: No mount point is assigned for the ${FILESYSTEM} file system in partition #${PARTITION} of ${DEVICE}.
hr: Datotečnom sustavu ${FILESYSTEM} na particiji br. ${PARTITION} uređaja ${DEVICE} nije određena točka montiranja.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and assign a mount point from there, this partition will not be used at all.
hr: Ako se ne vratite u izbornik particioniranja i ne odredite točku montiranja, ta se particija uopće neće koristiti.

note: Type: error Description :sl2:
en: Invalid file system for this mount point
hr: Neispravan datotečni sustav za ovu točku montiranja

note: Type: error Description :sl2:
en: The file system type ${FILESYSTEM} cannot be mounted on ${MOUNTPOINT}, because it is not a fully-functional Unix file system. Please choose a different file system, such as ${EXT2}.
hr: Vrsta datotečnog sustava ${FILESYSTEM} se ne može montirati na ${MOUNTPOINT} jer to nije sasvim funkcionalni Unix datotečni sustav. Molim izaberite neki drugi datotečni sustav, npr. ${EXT2}.

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: / - the root file system
hr: / - korijenski datotečni sustav

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /boot - static files of the boot loader
hr: /boot - statičke datoteke boot učitavača

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /home - user home directories
hr: /home - direktoriji 'običnih' korisnika

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /tmp - temporary files
hr: /tmp - privremene datoteke

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /usr - static data
hr: /usr - statički podaci

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /var - variable data
hr: /var - varijabilni podaci

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /srv - data for services provided by this system
hr: /srv - podaci za servise sustava

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /opt - add-on application software packages
hr: /opt - dodatni programski paketi

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /usr/local - local hierarchy
hr: /usr/local - stablo s lokalnim stvarima

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: Enter manually
hr: Unesi ručno

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: Do not mount it
hr: Ne montiraj

note: Type: select Description Type: string :sl2:
en: Mount point for this partition:
hr: Točka montiranja za ovu particiju:

note: Type: error Description :sl2:
en: Invalid mount point
hr: Neispravna točka montiranja

note: Type: error Description :sl2:
en: The mount point you entered is invalid.
hr: Točka montiranja koju ste unijeli nije ispravna.

note: Type: error Description :sl2:
en: Mount points must start with "/". They cannot contain spaces.
hr: Točke montiranja moraju početi s "/" i ne smiju sadržavati praznine.

note: Type: string Description :sl2:
en: Label for the file system in this partition:
hr: Oznaka datotečnog sustava na ovoj particiji:

note: Type: text Description :sl2:
en: Format the swap area:
hr: Formatiraj swap prostor:

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: text Description In the following context: "Format the partition: yes" :sl2: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# :sl3:
en: yes
hr: da

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: text Description In the following context: "Format the partition: no" :sl2: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# :sl3:
en: no
hr: ne

note: Type: text Description label of file system :sl2:
en: Label:
hr: Oznaka:

note: Type: text Description for partman-basicfilesystems: in the following context: "Label: none" :sl2:
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" relates to "Label:" ]
hr: nijedna

note: Type: text Description Up to 24 character positions :sl2:
en: Reserved blocks:
hr: Pričuvni blokovi:

note: Type: string Description :sl2:
en: Percentage of the file system blocks reserved for the super-user:
hr: Postotak blokova datotečnog sustava pričuvanih za administratorskog korisnika:

note: Type: text Description :sl2: Up to 25 character positions
en: Typical usage:
hr: Tipični način korištenja:

note: Type: text Description :sl2: In the following context: "Typical usage: standard"
en: standard
hr: uobičajeni

note: Type: text Description This is an item in the menu "Partition settings" :sl2:
en: Mount point:
hr: Točka montiranja:

note: Type: text Description :sl2: In the following context: "Mount point: none"
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" relates to "Mount point:" ]
hr: nijedna

note: Type: text Description :sl2:
en: Ext2 file system
hr: Ext2 datotečni sustav

note: Type: text Description :sl2:
en: FAT16 file system
hr: FAT16 datotečni sustav

note: Type: text Description :sl2:
en: FAT32 file system
hr: FAT32 datotečni sustav

note: Type: text Description :sl2:
en: NTFS journaling file system
hr: NTFS dnevnički datotečni sustav

note: Type: text Description :sl2:
en: swap area
hr: swap prostor

note: Type: text Description Type: multiselect :sl2:
en: Mount options:
hr: Mogućnosti montiranja:

note: Type: multiselect Description :sl2:
en: Mount options can tune the behavior of the file system.
hr: Mogućnosti montiranja određuju ponašanje datotečnog sustava.

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: noatime - do not update inode access times at each access
hr: noatime - ne osvježavaj vremena pristupa pri svakom pristupu

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: nodiratime - do not update directory inode access times
hr: nodiratime - ne osvježavaj vremena pristupa direktorijima

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: relatime - update inode access times relative to modify time
hr: relatime - osvježavaj vremena pristupa rel. vremenu promjene

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: nodev - do not support character or block special devices
hr: nodev - ne podržavaj posebne znakovne ili blok uređaje

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: nosuid - ignore set-user-identifier or set-group-identifier bits
hr: nosuid - zanemari set-user-identifier i set-group-identifier bit

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: noexec - do not allow execution of any binaries
hr: noexec - ne dopusti izvršavanje binarnih datoteka

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: ro - mount the file system read-only
hr: ro - montiraj datotečni sustav samo-za-čitanje

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: sync - all input/output activities occur synchronously
hr: sync - sve ulazne/izlazne aktivnosti sinkronizirane

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: usrquota - user disk quota accounting enabled
hr: usrquota - omogući računanje korisničkih diskovnih udjela

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: grpquota - group disk quota accounting enabled
hr: grpquota - omogući računanje grupnih diskovnih udjela

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: user_xattr - support user extended attributes
hr: user_xattr - podrška za korisničke dodatne atribute

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: quiet - changing owner and permissions does not return errors
hr: quiet - mijenjanje vlasnika i dopuštenja ne pokazuje pogreške

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: notail - disable packing of files into the file system tree
hr: notail - onemogući pakiranje datoteka u stablo datotečnog sustava

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: discard - trim freed blocks from underlying block device
hr: discard - odreži oslobođene blokove s pozadinskog blokovskog uređaja

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: boolean Description :sl5: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# :sl2:
en: Go back to the menu and correct this problem?
hr: Vrati se u izbornik i ispravi taj problem

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: boolean Description :sl5: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# :sl2:
en: If you do not go back to the partitioning menu and correct this error, the partition will be used as is. This means that you may not be able to boot from your hard disk.
hr: Ako se ne vratite u izbornik particioniranja i ne ispravite taj problem, ta će particija ostati kakva jest. To znači da možda nećete moći podizati sustav s tvrdog diska.

note: Type: text Description :sl2: File system name
en: Ext3 journaling file system
hr: Ext3 dnevnički datotečni sustav

note: Type: text Description :sl2: File system name
en: Ext4 journaling file system
hr: Ext4 dnevnički datotečni sustav

note: Type: boolean Description :sl2:
en: Your boot partition has not been configured with the ext2 or ext3 file system. This is needed by your machine in order to boot. Please go back and use either the ext2 or ext3 file system.
hr: Vaša boot particija nije podešena za ext2 ili ext3 datotečni sustav. To je potrebno vašem računalu radi podizanja sustava. Molim vratite se i izaberite ext2 ili ext3 datotečni sustav.

note: Type: boolean Description :sl2:
en: Your boot partition is not located on the first primary partition of your hard disk. This is needed by your machine in order to boot.  Please go back and use your first primary partition as a boot partition.
hr: Vaša boot particija nije prva primarna particija vašeg tvrdog diska. To je potrebno vašem računalu radi podizanja sustava. Molim vratite se i koristite prvu primarnu particiju kao boot particiju.

note: Type: boolean Description :sl2:
en: Return to the menu to set the bootable flag?
hr: Vrati se u izbornik i podesi oznaku 'bootable'?

note: Type: boolean Description :sl2:
en: The boot partition has not been marked as a bootable partition, even though this is required by your machine in order to boot. You should go back and set the bootable flag for the boot partition.
hr: Vaša boot particija nije označena kao 'bootable' particija. To je potrebno vašem računalu radi podizanja sustava. Molim vratite se i postavite oznaku 'bootable' za boot particiju.

note: Type: boolean Description :sl2:
en: If you don't correct this, the partition will be used as is and it is likely that the machine cannot boot from its hard disk.
hr: Ako ne ispravite taj problem, ta će particija ostati kakva jest i vjerojatno nećete moći podizati sustav s tvrdog diska.

note: Type: boolean Description :sl2:
en: The partition ${PARTITION} assigned to ${MOUNTPOINT} starts at an offset of ${OFFSET} bytes from the minimum alignment for this disk, which may lead to very poor performance.
hr: Particija ${PARTITION} pridružena točki montiranja ${MOUNTPOINT} počinje s pomakom ${OFFSET} bajtova od minimalnog položaja za disk, što može dovesti do vrlo lošeg rada.

note: Type: boolean Description :sl2:
en: Since you are formatting this partition, you should correct this problem now by realigning the partition, as it will be difficult to change later. To do this, go back to the main partitioning menu, delete the partition, and recreate it in the same position with the same settings. This will cause the partition to start at a point best suited for this disk.
hr: S obzirom da formatirate ovu particiju, trebali biste popraviti ovaj problem mijenjanjem položaja particije, što bi kasnije moglo biti neizvedivo. Da biste to napravili, vratite se u glavni izbornik particioniranja, izbrišite particiju i ponovo ju napravite na istom mjestu s istim postavkama. Ovo će postaviti početak particije na položaj koji najbolje odgovara ovom disku.

note: Type: text Description :sl2: File system name
en: btrfs journaling file system
hr: btrfs dnevnički datotečni sustav

note: Type: error Description :sl2:
en: btrfs root file system not supported without separate /boot
hr: btrfs korijenski datotečni sustav nije podržan bez odvojenog /boot

note: Type: error Description :sl2:
en: Your root file system is a btrfs file system. This is not supported by the boot loader used by default by this installer.
hr: Vaš korijenski datotečni sustav je btrfs. To će vjerojatno izazvati probleme s boot učitavačem koji je zadan za ovu instalaciju.

note: Type: error Description :sl2:
en: You should use a small /boot partition with another file system, such as ext4.
hr: Trebali biste koristiti malu /boot particiju s drugim datotečnim sustavom, recimo ext4.

note: Type: error Description :sl2:
en: btrfs file system not supported for /boot
hr: btrfs nije podržani datotečni sustav za /boot

note: Type: error Description :sl2:
en: You have mounted a btrfs file system as /boot. This is not supported by the boot loader used by default by this installer.
hr: Montirali ste btrfs datotečni sustav kao /boot. To nije podržano u boot učitavaču koji je zadan za ovu instalaciju.

note: Type: error Description :sl2:
en: You should use another file system, such as ext4, for the /boot partition.
hr: Trebali biste koristiti drugi datotečni sustav, npr. ext4, za /boot particiju.

note: Type: text Description File system name :sl2:
en: JFS journaling file system
hr: JFS dnevnički datotečni sustav

note: Type: boolean Description :sl2:
en: Use unrecommended JFS root file system?
hr: Koristi nepreporučeni JFS korijenski datotečni sustav?

note: Type: boolean Description :sl2:
en: Your root file system is a JFS file system. This can cause problems with the boot loader used by default by this installer.
hr: Vaš korijenski datotečni sustav je JFS. To će vjerojatno izazvati probleme s boot učitavačem koji je zadan za ovu instalaciju.

note: Type: boolean Description :sl2:
en: You should use a small /boot partition with another file system, such as ext3.
hr: Trebali biste koristiti malu /boot particiju s drugim datotečnim sustavom, recimo ext3.

note: Type: boolean Description :sl2:
en: Use unrecommended JFS /boot file system?
hr: Koristi nepreporučeni JFS /boot datotečni sustav?

note: Type: boolean Description :sl2:
en: You have mounted a JFS file system as /boot. This is likely to cause problems with the boot loader used by default by this installer.
hr: Montirali ste JFS datotečni sustav kao /boot. To će vjerojatno izazvati probleme s boot učitavačem koji je zadan za ovu instalaciju.

note: Type: boolean Description :sl2:
en: You should use another file system, such as ext3, for the /boot partition.
hr: Trebali biste koristiti drugi datotečni sustav, npr. ext3, za /boot particiju.

note: Type: text Description :sl2: File system name
en: XFS journaling file system
hr: XFS dnevnički datotečni sustav

note: Type: error Description :sl2:
en: Identical labels for two file systems
hr: Iste oznake za dva datotečna sustava

note: Type: error Description :sl2:
en: Two file systems are assigned the same label (${LABEL}): ${PART1} and ${PART2}. Since file system labels are usually used as unique identifiers, this is likely to cause reliability problems later.
hr: Dva datotečna sustava imaju dodijeljene iste oznake (${LABEL}): ${PART1} i ${PART2}. Budući da se oznake datotečnih sustava obično koriste kao jedinstveni identifikatori, ovo će vjerojatno kasnije uzrokovati probleme s nepouzdanošću.

note: Type: error Description :sl2:
en: Please correct this by changing labels.
hr: Molim ispravite to mijenjajući oznake.

note: Type: error Description :sl2:
en: Identical mount points for two file systems
hr: Iste točke montiranja za dva datotečna sustava

note: Type: error Description :sl2:
en: Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} and ${PART2}.
hr: Dva datotečna sustava imaju istu točku montiranja (${MOUNTPOINT}): ${PART1} i ${PART2}.

note: Type: error Description :sl2:
en: Please correct this by changing mount points.
hr: Molim ispravite to mijenjajući točke montiranja.

note: Type: error Description :sl2:
en: No root file system
hr: Nema korijenskog datotečnog sustava.

note: Type: error Description :sl2:
en: No root file system is defined.
hr: Nije određen korijenski datotečni sustav.

note: Type: error Description :sl2:
en: Please correct this from the partitioning menu.
hr: Molim ispravite to u izborniku particioniranja.

note: Type: error Description :sl2:
en: Separate file system not allowed here
hr: Odvojeni datotečni sustav ovdje nije dopušten

note: Type: error Description :sl2:
en: You assigned a separate file system to ${MOUNTPOINT}, but in order for the system to start correctly this directory must be on the root file system.
hr: Postavili ste odvojeni datotečni sustav na ${MOUNTPOINT}, ali taj direktorij mora biti na osnovnom datotečnom sustavu kako bi se sustav mogao podići.

note: Type: boolean Description :sl2:
en: Do you want to resume partitioning?
hr: Želite li nastaviti particioniranje?

note: Type: boolean Description :sl2:
en: The attempt to mount a file system with type ${TYPE} in ${DEVICE} at ${MOUNTPOINT} failed.
hr: Pokušaj montiranja datotečnog sustava tipa ${TYPE} na uređaj ${DEVICE} u točku ${MOUNTPOINT} nije uspio.

note: Type: boolean Description :sl2:
en: You may resume partitioning from the partitioning menu.
hr: Možete nastaviti particioniranje iz glavnog izbornika.

note: Type: text Description :sl2:
en: Use as:
hr: Koristi kao:

note: Type: boolean Description :sl2:
en: Set the clock using NTP?
hr: Postaviti sat koristeći NTP?

note: Type: boolean Description :sl2:
en: The Network Time Protocol (NTP) can be used to set the system's clock. The installation process works best with a correctly set clock.
hr: Sat na računalu se može podesiti koristeći Network Time Protocol (NTP) tj. mrežne poslužitelje točnog vremena. Postupak instalacije najbolje radi kada je sat točno podešen.

note: Type: string Description :sl2:
en: NTP server to use:
hr: Adresa poslužitelja točnog vremena (NTP):

note: Type: string Description :sl2:
en: The default NTP server is almost always a good choice, but if you prefer to use another NTP server, you can enter it here.
hr: Unaprijed postavljeni NTP poslužitelj je skoro uvijek dobar izbor, ali ako želite koristiti neki drugi, možete ga upisati ovdje.

note: Type: boolean Description :sl2:
en: Wait another 30 seconds for hwclock to set the clock?
hr: Pričekati još 30 sekundi da hwclock podesi sat?

note: Type: boolean Description :sl2:
en: Setting the hardware clock is taking longer than expected. The 'hwclock' program used to set the clock may have problems talking to the hardware clock.
hr: Postavljanje sata u sklopovlju traje dulje nego što je očekivano. Program 'hwclock' koji se koristi za postavljanje sata možda ima problema u komunikaciji sa satom u sklopovlju.

note: Type: boolean Description :sl2:
en: If you choose to not wait for hwclock to finish setting the clock, this system's clock may not be set correctly.
hr: Ako ne nastavite čekati dok hwclock ne završi podešavanje sata, možda sat na ovom sustavu neće biti dobro podešen.

note: Type: boolean Description :sl2:
en: Proceed with installation to unclean target?
hr: Nastaviti instalaciju na nečisto odredište?

note: Type: boolean Description :sl2:
en: The target file system contains files from a past installation. These files could cause problems with the installation process, and if you proceed, some of the existing files may be overwritten.
hr: Odredišni datotečni sustav sadrži datoteke iz prošle instalacije. Te datoteke bi mogle prouzročiti probleme u postupku instaliranja, a ako nastavite, neke od postojećih datoteka bi mogle biti prebrisane.

note: Type: error Description :sl2:
en: No file system mounted on /target
hr: Nema datotečnog sustava montiranog na /target

note: Type: error Description :sl2:
en: Before the installation can proceed, a root file system must be mounted on /target. The partitioner and formatter should have done this for you.
hr: Prije nastavka instalacije, korijenski datotečni sustav mora biti montiran na /target. Programi za particioniranje i formatiranje su vam to trebali učiniti.

note: Type: error Description :sl2:
en: Not installing to unclean target
hr: Ne instaliram na nečisto odredište

note: Type: error Description :sl2:
en: The installation to the target file system has been canceled. You should go back and erase or format the target file system before proceeding with the install.
hr: Instalacija na odredišni datotečni sustav je otkazana. Trebali biste se vratiti i obrisati ili formatirati odredišni datotečni sustav prije nastavka instalacije.

note: Type: error Description The base system is the minimal Debian system See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7 :sl2:
en: Cannot install base system
hr: Instalacija osnovnog sustava nije uspjela

note: Type: error Description The base system is the minimal Debian system See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7 :sl2:
en: The installer cannot figure out how to install the base system. No installable CD-ROM was found and no valid mirror was configured.
hr: Program za instalaciju ne može instalirati osnovni sustav. Nije pronađen instalacijski CD-ROM, a nije podešen ni ispravan zrcalni poslužitelj.

note: Type: error Description :sl2: SUBST0 is a Release file name. SUBST0 is a Release.gpg file name SUBST0 is a gpg key ID SUBST0 is a filename SUBST0 is a filename or package name Debootstrap is a program name: should not be translated
en: Debootstrap Error
hr: Debootstrap greška

note: Type: error Description :sl2:
en: Failed to determine the codename for the release.
hr: Neuspjelo određivanje oznake (codename) izdanja.

note: Type: error Description :sl2:
en: Failed to install the base system
hr: Instalacija osnovnog sustava nije uspjela

note: Type: error Description :sl2:
en: The base system installation into /target/ failed.
hr: Instalacija osnovnog sustava na /target/ nije uspjela.

note: Type: error Description :sl2:
en: Base system installation error
hr: Greška pri instalaciji osnovnog sustava

note: Type: error Description :sl2:
en: The debootstrap program exited with an error (return value ${EXITCODE}).
hr: Program debootstrap prekinuo je rad uz grešku (povratna vrijednost ${EXITCODE})

note: Type: error Description :sl2:
en: The debootstrap program exited abnormally.
hr: Program debootstrap je nenormalno prekinuo s radom.

note: Type: error Description :sl2:
en: The following error occurred:
hr: Pojavila se sljedeća greška:

note: Type: error Description :sl2:
en: Unable to install the selected kernel
hr: Ne mogu instalirati izabranu jezgru.

note: Type: error Description :sl2:
en: An error was returned while trying to install the kernel into the target system.
hr: Pojavila se greška pri pokušaju instalacije jezgre na odredišni sustav.

note: Type: error Description :sl2:
en: Kernel package: '${KERNEL}'.
hr: Paket jezgre: '${KERNEL}'.

note: Type: select Choices :sl2:
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" means "no kernel" ]
hr: nijedan

note: Type: select Description :sl2:
en: Kernel to install:
hr: Instalirati jezgru:

note: Type: select Description :sl2:
en: The list shows the available kernels. Please choose one of them in order to make the system bootable from the hard drive.
hr: Na popisu su dostupne jezgre. Molim izaberite jednu kako biste učinili sustav sposobnim za podizanje s tvrdog diska.

note: Type: boolean Description :sl2:
en: Continue without installing a kernel?
hr: Nastavi bez instaliranja jezgre?

note: Type: boolean Description :sl2:
en: No installable kernel was found in the defined APT sources.
hr: Nema jezgre za instalaciju na dostupnim apt-ovim izvorima.

note: Type: boolean Description :sl2:
en: You may try to continue without a kernel, and manually install your own kernel later. This is only recommended for experts, otherwise you will likely end up with a machine that doesn't boot.
hr: Možete pokušati nastaviti bez jezgre i kasnije ručno instalirati svoju jezgru. Ovo se preporučuje jedino stručnjacima, inače ćete završiti sa strojem koji se ne može podići.

note: Type: error Description :sl2:
en: Cannot install kernel
hr: Ne mogu instalirati jezgru

note: Type: error Description :sl2:
en: The installer cannot find a suitable kernel package to install.
hr: Instalacijski program ne može naći prikladan paket jezgre za instalaciju.

note: Type: error Description :sl2:
en: Unable to install ${PACKAGE}
hr: Ne mogu instalirati ${PACKAGE}

note: Type: error Description :sl2:
en: An error was returned while trying to install the ${PACKAGE} package onto the target system.
hr: Pojavila se greška pri pokušaju instalacije paketa ${PACKAGE} na odredišni sustav.

note: Type: error Description :sl2: SUBST0 is a Release file name.
en: Failed getting Release file ${SUBST0}.
hr: Neuspjelo skidanje 'Release' datoteke ${SUBST0}.

note: Type: error Description :sl2: SUBST0 is a Release.gpg file name
en: Failed getting Release signature file ${SUBST0}.
hr: Neuspjelo skidanje potpisa 'Release' datoteke ${SUBST0}.

note: Type: error Description :sl2: SUBST0 is a gpg key ID
en: Release file signed by unknown key (key id ${SUBST0})
hr: 'Release' datoteka potpisana nepoznatim ključem (oznaka ${SUBST0}).

note: Type: error Description :sl2:
en: Invalid Release file: no valid components.
hr: Neispravna 'Release' datoteka: nema ispravnih dijelova.

note: Type: error Description :sl2: SUBST0 is a filename
en: Invalid Release file: no entry for ${SUBST0}.
hr: Neispravna 'Release' datoteka: nema unosa za ${SUBST0}.

note: Type: error Description :sl2: SUBST0 is a filename or package name Debootstrap is a program name: should not be translated
en: Couldn't retrieve ${SUBST0}. This may be due to a network problem or a bad CD, depending on your installation method.
hr: Nemoguće dohvatiti ${SUBST0}. Ovo se može dogoditi zbog mrežnog problema ili zbog lošeg CD-a, ovisno o vašem načinu instalacije.

note: Type: error Description :sl2: SUBST0 is a filename or package name Debootstrap is a program name: should not be translated
en: If you are installing from CD-R or CD-RW, burning the CD at a lower speed may help.
hr: Ako instalirate sa CD-R-a ili CD-RW-a, zapisivanje CD-a na manjoj brzini može pomoći.

note: Type: error Description Debootstrap is a program name: should not be translated :sl2:
en: Debootstrap warning
hr: Debootstrap upozorenje

note: Type: error Description Debootstrap is a program name: should not be translated :sl2:
en: Warning: ${INFO}
hr: Upozorenje: ${INFO}

note: Type: text Description SUBST0 is an url :sl2:
en: Retrying failed download of ${SUBST0}
hr: Ponovno pokušavam skinuti ${SUBST0}

note: Type: text Description :sl2:
en: Scanning local repositories...
hr: Pretražujem lokalne repozitorije...

note: Type: text Description :sl2:
en: Scanning the security updates repository...
hr: Pretražujem repozitorij sigurnosnih osvježenja...

note: Type: text Description :sl2:
en: Scanning the release updates repository...
hr: Pretražujem repozitorij nadogradnji izdanja (release)...

note: Type: text Description :sl2:
en: Scanning the backports repository...
hr: Pretražujem repozitorij "backported" programa...

note: Type: select Choices :sl2: These are choices of actions so this is, at least in English, an infinitive form
en: Ignore
hr: Zanemari

note: Type: error Description :sl2:
en: Cannot access repository
hr: Ne mogu pristupiti repozitoriju

note: Type: error Description :sl2:
en: The repository on ${HOST} couldn't be accessed, so its updates will not be made available to you at this time. You should investigate this later.
hr: Repozitoriju na ${HOST} nije bilo moguće pristupiti pa vam te nadogradnje neće biti dostupne u ovom trenutku. Trebali biste to istražiti kasnije.

note: Type: error Description :sl2:
en: Commented out entries for ${HOST} have been added to the /etc/apt/sources.list file.
hr: Unosi za ${HOST}, ali u komentaru, su dodani u datoteku /etc/apt/sources.list.

note: Type: error Description :sl2:
en: apt configuration problem
hr: Problem u podešavanju apta

note: Type: error Description :sl2:
en: An attempt to configure apt to install additional packages from the CD failed.
hr: Pokušaj podešavanja apta kako bi instalirao dodatne pakete s CD-a nije uspio.

note: Type: boolean Description :sl2:
en: Continue without a network mirror?
hr: Nastavi bez mrežnog zrcalnog poslužitelja?

note: Type: boolean Description :sl2:
en: No network mirror was selected.
hr: Mrežni zrcalni poslužitelj nije izabran.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use restricted software?
hr: Koristiti softver s ograničenjima?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some non-free software is available in packaged form. Though this software is not a part of the main distribution, standard package management tools can be used to install it. This software has varying licenses which may prevent you from using, modifying, or sharing it.
hr: Neki neslobodni (non-free) programi su dostupni u obliku paketa. Iako taj softver nije dio glavne distribucije, uobičajeni alati za upravljanje paketima se mogu koristiti kako bi to instalirali. Ti programi imaju različite licence koje bi vas mogle spriječiti da ih koristite, prilagođavate ili dijelite.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use software from the "universe" component?
hr: Koristiti programe iz "universe" dijela?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some additional software is available in packaged form. This software is free and, though it is not a part of the main distribution, standard package management tools can be used to install it.
hr: Neki dodatni programi su dostupni u obliku paketa. Ovi programi su slobodni i iako nisu dio glavne distribucije, standardni alati za upravljanje paketima se mogu koristiti za njihovu instalaciju.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use software from the "multiverse" component?
hr: Koristi programe iz "multiverse" dijela?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some non-free software is available in packaged form. Though this software is not a part of the main distribution, standard package management tools can be used to install it. This software has varying licenses and (in some cases) patent restrictions which may prevent you from using, modifying, or sharing it.
hr: Neki neslobodni (non-free) programi su dostupni u obliku paketa. Iako taj softver nije dio glavne distribucije, uobičajeni alati za upravljanje paketima se mogu koristiti kako bi to instalirali. Ti programi imaju različite licence i (u nekim slučajevima) patentna ograničenja koja bi vas mogla spriječiti da ih koristite, prilagođavate ili dijelite.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use software from the "partner" repository?
hr: Koristiti programe iz "partner" dijela?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some additional software is available from Canonical's "partner" repository. This software is not part of Ubuntu, but is offered by Canonical and the respective vendors as a service to Ubuntu users.
hr: Neki dodatni softver je dostupan iz Canonicalovog "partner" repozitorija. Ovaj softver nije dio Ubuntua, ali ga Canonical i ostali nude kao uslugu korisnicima Ubuntua.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use backported software?
hr: Koristi programe koji su 'backported'?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some software has been backported from the development tree to work with this release. Although this software has not gone through such complete testing as that contained in the release, it includes newer versions of some applications which may provide useful features.
hr: Neki programi su 'backported' ("vraćeni-prebačeni") iz razvojnog stabla da bi radili s ovim izdanjem. Iako ovi programi nisu prošli kroz potpuno testiranje kao oni koji su dio izdanja, tu su novije verzije nekih programa koje mogu pružiti korisne mogućnosti.

note: Type: boolean Description :sl2:
en: Create a normal user account now?
hr: Načini i običan korisnički račun?

note: Type: boolean Description :sl2:
en: It's a bad idea to use the root account for normal day-to-day activities, such as the reading of electronic mail, because even a small mistake can result in disaster. You should create a normal user account to use for those day-to-day tasks.
hr: Nije dobro koristiti administratorski račun za svakodnevne aktivnosti, primjerice čitanje i slanje e-pošte, jer vam i mala greška može pričiniti veliku štetu. Zato trebate načiniti običan korisnički račun.

note: Type: boolean Description :sl2:
en: Note that you may create it later (as well as any additional account) by typing 'adduser <username>' as root, where <username> is an username, like 'imurdock' or 'rms'.
hr: Primijetite da ga možete načiniti i kasnije (kao i bilo koji dodatni korisnički račun) tako da utipkate 'adduser <ime_korisnika>', prijavljeni kao administratorski korisnik. To <ime_korisnika> može biti proizvoljno, primjerice 'pero', 'ana'...

note: Type: error Description :sl2:
en: Invalid username
hr: Neispravno korisničko ime

note: Type: error Description :sl2:
en: The username you entered is invalid. Note that usernames must start with a lower-case letter, which can be followed by any combination of numbers and more lower-case letters, and must be no more than 32 characters long.
hr: Korisničko ime koje ste unijeli nije ispravno. Korisnička imena moraju započinjati malim slovom, mogu se sastojati od bilo koje kombinacije brojaka i malih slova i ne smiju biti dulja od 32 znaka.

note: Type: error Description :sl2:
en: Reserved username
hr: Rezervirano korisničko ime

note: Type: error Description :sl2:
en: The username you entered (${USERNAME}) is reserved for use by the system. Please select a different one.
hr: Korisničko ime koje ste upisali (${USERNAME}) je rezervirano za sistemsku upotrebu. Molim odredite drugo.

note: Type: error Description :sl2:
en: Password input error
hr: Greška pri unošenju lozinke

note: Type: error Description :sl2:
en: The two passwords you entered were not the same. Please try again.
hr: Lozinke koje ste unijeli nisu jednake. Molim pokušajte iznova.

note: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# Type: error Description :sl2: :sl3: #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-#
en: Empty password
hr: Prazna lozinka

note: #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-# Type: error Description :sl2: :sl3: #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-#
en: You entered an empty password, which is not allowed. Please choose a non-empty password.
hr: Unijeli ste praznu lozinku, što nije dozvoljeno. Molim izaberite lozinku.

note: Type: boolean Description :sl2:
en: Enable shadow passwords?
hr: Omogući 'shadow' lozinke?

note: Type: boolean Description :sl2:
en: Shadow passwords make your system more secure because nobody is able to view even encrypted passwords. The passwords are stored in a separate file that can only be read by special programs. The use of shadow passwords is strongly recommended, except in a few cases such as NIS environments.
hr: 'Shadow' lozinke čine vaš sustav sigurnijim jer nitko ne može vidjeti čak niti šifrirane lozinke. Sve one su spremljene u posebnu datoteku koju mogu čitati samo posebni programi. Korištenje 'shadow' lozinki se najtoplije preporuča, osim u par slučajeva kao npr. ako ste u NIS okruženju.

note: Type: select Choices :sl2:
en: critical
hr: kritične

note: Type: select Choices :sl2:
en: high
hr: visoke

note: Type: select Choices :sl2:
en: medium
hr: srednje

note: Type: select Choices :sl2:
en: low
hr: niske

note: Type: select Description :sl2:
en: Ignore questions with a priority less than:
hr: Preskoči pitanja razine važnosti niže od:

note: Type: select Description :sl2:
en: Packages that use debconf for configuration prioritize the questions they might ask you. Only questions with a certain priority or higher are actually shown to you; all less important questions are skipped.
hr: Paketi koji rabe debconf za podešavanje dijele pitanja koja vam upućuju prema razini važnosti. Samo pitanja važnosti koju vi odredite, ili više, će vam biti postavljena. Sva pitanja niže važnosti će se preskočiti.

note: Type: select Description :sl2:
en: You can select the lowest priority of question you want to see:
     - 'critical' is for items that will probably break the system
        without user intervention.
     - 'high' is for items that don't have reasonable defaults.
     - 'medium' is for normal items that have reasonable defaults.
     - 'low' is for trivial items that have defaults that will work in
       the vast majority of cases.
hr: Izaberite najnižu razinu važnosti pitanja koja želite vidjeti:
     - 'kritična' je za probleme koji će vjerojatno srušiti sustav
        bez utjecaja korisnika.
     - 'visoka' je za probleme koji nemaju zadane vrijednosti.
     - 'srednja' je za stvari koje imaju zadane vrijednosti.
     - 'niska' je za nevažne stvari koje će u premoćno najvećem broju
       slučajeva dobro raditi po zadanim vrijednostima.

note: Type: select Description :sl2:
en: For example, this question is of medium priority, and if your priority were already 'high' or 'critical', you wouldn't see this question.
hr: Primjerice, ovo pitanje je srednje važnosti i da ste već odredili željenu razinu kao 'visoku' ili 'kritičnu', ne biste ga vidjeli.

note: Type: text Description :sl2:
en: Change debconf priority
hr: Promijeni debconf razinu važnosti

note: Type: error Description :sl3: :sl2:
en: Unable to configure GRUB
hr: Ne mogu podesiti GRUB

note: Type: string Description :sl2: Type: select
en: Device for boot loader installation:
hr: Uređaj za instalaciju boot učitavača:

note: Type: string Description :sl2: Type: select
en: You need to make the newly installed system bootable, by installing the GRUB boot loader on a bootable device. The usual way to do this is to install GRUB on the master boot record of your first hard drive. If you prefer, you can install GRUB elsewhere on the drive, or to another drive, or even to a floppy.
hr: Trebate učiniti vaš novoinstalirani sustav sposobnim za podizanje tako da instalirate GRUB boot učitavač na odgovarajući diskovni uređaj. Uobičajeno je staviti ga u osnovni boot zapis (master boot record) vašeg prvog tvrdog diska. Možete ga staviti i drugdje na tome disku, na drugi disk ili čak i na disketu.

note: Type: string Description :sl2:
en: The device should be specified as a device in /dev. Below are some examples:
     - "/dev/sda" will install GRUB to the master boot record of your first
       hard drive;
     - "/dev/sda2" will use the second partition of your first hard drive;
     - "/dev/sdc5" will use the first extended partition of your third hard
       drive;
     - "/dev/fd0" will install GRUB to a floppy.
hr: Uređaj možete odrediti kao uređaj iz /dev. Evo nekoliko primjera:
     - "/dev/sda" instalirat će GRUB u osnovni boot zapis vašeg prvog
       tvrdog diska,
     - "/dev/sda2" označava drugu particiju vašeg prvog tvrdog diska,
     - "/dev/sdc5" označava prvu logičku particiju vašeg trećeg
       tvrdog diska,
     - "/dev/fd0" instalirat će GRUB na disketu.

note: Type: password Description :sl2:
en: GRUB password:
hr: GRUB lozinka:

note: Type: password Description :sl2:
en: The GRUB boot loader offers many powerful interactive features, which could be used to compromise your system if unauthorized users have access to the machine when it is starting up. To defend against this, you may choose a password which will be required before editing menu entries or entering the GRUB command-line interface. By default, any user will still be able to start any menu entry without entering the password.
hr: GRUB boot učitavač nudi niz moćnih interaktivnih mogućnosti, koje bi se mogle iskoristiti za kompromitiranje vašeg sustava ako neovlašteni korisnici imaju pristup stroju dok se podiže. Kako biste se obranili od tako nečeg, možete izabrati lozinku čiji će se upis zahtijevati prije uređivanja izbornika ili ulaska u GRUB naredbeni redak. Pretpostavljena vrijednost je da će svaki korisnik moći pokrenuti svaki izbor iz izbornika bez unošenja lozinke.

note: Type: password Description :sl2:
en: If you do not wish to set a GRUB password, leave this field blank.
hr: Ako ne želite postaviti GRUB lozinku, ostavite prazno.

note: Type: password Description :sl2:
en: Please enter the same GRUB password again to verify that you have typed it correctly.
hr: Molim unesite istu GRUB lozinku kao potvrdu da ste je ispravno utipkali.

note: Type: error Description :sl2:
en: GRUB installation failed
hr: Instalacija GRUB-a nije uspjela

note: Type: error Description :sl2:
en: The '${GRUB}' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot.
hr: Paket '${GRUB}' se nije uspio instalirati na /target/. Bez GRUB boot učitavača instalirani sustav se neće moći podići.

note: Type: error Description :sl2:
en: Unable to install GRUB in ${BOOTDEV}
hr: Ne mogu instalirati GRUB na ${BOOTDEV}

note: Type: error Description :sl2:
en: Executing 'grub-install ${BOOTDEV}' failed.
hr: Izvršavanje 'grub-install ${BOOTDEV}' nije uspjelo.

note: Type: error Description :sl2:
en: This is a fatal error.
hr: Ovo je kobna greška.

note: Type: error Description :sl2:
en: Executing 'update-grub' failed.
hr: Izvršavanje 'update-grub' nije uspjelo.

note: Type: text Description Rescue menu item :sl2:
en: Reinstall GRUB boot loader
hr: Ponovo instalirati GRUB boot učitavač

note: Type: text Description Rescue menu item :sl2:
en: Force GRUB installation to the EFI removable media path
hr: Prisilno instalirati GRUB na EFI uklonjivog uređaja

note: Type: error Description :sl2:
en: Failed to retrieve the preconfiguration file
hr: Neuspjelo dobavljanje datoteke s pred-postavkama

note: Type: error Description :sl2:
en: The file needed for preconfiguration could not be retrieved from ${LOCATION}. The installation will proceed in non-automated mode.
hr: Datoteku koja je potrebna za pred-postavljanje nije moguće dobaviti s ${LOCATION}. Instalacija će se nastaviti u neautomatskom načinu.

note: Type: error Description :sl2:
en: Failed to process the preconfiguration file
hr: Neuspjelo učitavanje datoteke s pred-postavkama

note: Type: error Description :sl2:
en: The installer failed to process the preconfiguration file from ${LOCATION}. The file may be corrupt.
hr: Instalacija nije uspjela učitati datoteku s pred-postavkama s ${LOCATION}. Datoteka je možda oštećena.

note: Type: error Description :sl2:
en: Failed to run preseeded command
hr: Izvršenje preseed naredbe nije uspjelo

note: Type: error Description :sl2:
en: Execution of preseeded command "${COMMAND}" failed with exit code ${CODE}.
hr: Izvršenje preseed naredbe ("${COMMAND}") nije uspjelo uz izlaz ${CODE}.

note: Type: title Description Info message displayed when running in rescue mode :sl2:
en: Rescue mode
hr: Spasonosni način rada

note: Type: select Description :sl2:
en: Device to use as root file system:
hr: Uređaj za koristiti kao korijenski datotečni sustav:

note: Type: select Description :sl2:
en: Enter a device you wish to use as your root file system. You will be able to choose among various rescue operations to perform on this file system.
hr: Upišite uređaj koji želite koristiti kako svoj korijenski datotečni sustav. Moći ćete izabrati među nizom spasonosnih operacija za primijeniti na tom datotečnom sustavu.

note: Type: select Description :sl2:
en: If you choose not to use a root file system, you will be given a reduced choice of operations that can be performed without one. This may be useful if you need to correct a partitioning problem.
hr: Ako ne izaberete korištenje root datotečnog sustava, bit će vam ponuđen smanjen izbor operacija koje se mogu izvesti bez njega. Ovo može biti korisno ako morate ispraviti problem prilikom particioniranja.

note: Type: text Description :sl2:
en: Execute a shell in ${DEVICE}
hr: Pokreni ljusku (shell) na ${DEVICE}

note: Type: text Description :sl2:
en: Execute a shell in the installer environment
hr: Pokreni ljusku (shell) u okruženju instalera

note: Type: text Description :sl2:
en: Choose a different root file system
hr: Izaberi drugi korijenski datotečni sustav

note: Type: text Description :sl2:
en: Reboot the system
hr: Ponovo pokreni sustav

note: Type: text Description :sl2:
en: Executing a shell
hr: Pokreni ljusku (shell)

note: Type: text Description :sl2:
en: After this message, you will be given a shell with ${DEVICE} mounted on "/". If you need any other file systems (such as a separate "/usr"), you will have to mount those yourself.
hr: Nakon ove poruke, ući ćete u ljusku (shell) sa ${DEVICE} montiranim na "/". Ako trebate koji drugi datotečni sustav (kao npr. odvojeni /usr), morat ćete ga sami montirati.

note: Type: text Description :sl2:
en: Interactive shell on ${DEVICE}
hr: Interaktivna ljuska (shell) na ${DEVICE}

note: Type: text Description :sl2:
en: After this message, you will be given a shell with ${DEVICE} mounted on "/target". You may work on it using the tools available in the installer environment. If you want to make it your root file system temporarily, run "chroot /target". If you need any other file systems (such as a separate "/usr"), you will have to mount those yourself.
hr: Nakon ove poruke, ući ćete u ljusku (shell) sa ${DEVICE} montiranim na "/target". Možete s njim raditi koristeći alate dostupne u okruženju instalacijskog programa. Ako ga želite privremeno učiniti korijenskim datotečnim sustavom, pokrenite "chroot /target". Ako trebate neke druge datotečne sustave (kao npr. odvojeni /usr), morat ćete ih sami montirati.

note: Type: text Description :sl2:
en: After this message, you will be given a shell in the installer environment. No file systems have been mounted.
hr: Nakon ove poruke, ući ćete u ljusku (shell) u okruženju instalacijskog programa. Nisu montirani nikakvi datotečni sustavi.

note: Type: text Description :sl2:
en: Interactive shell in the installer environment
hr: Interaktivna ljuska (shell) u okruženju instalacijskog programa

note: Type: password Description :sl2:
en: Passphrase for ${DEVICE}:
hr: Lozinka (passphrase) za ${DEVICE}:

note: Type: password Description :sl2:
en: Please enter the passphrase for the encrypted volume ${DEVICE}.
hr: Molim unesite lozinku (passphrase) za šifrirani prostor ${DEVICE}.

note: Type: password Description :sl2:
en: If you don't enter anything, the volume will not be available during rescue operations.
hr: Ako ne upišete ništa, taj prostor neće biti dostupan za vrijeme ovog postupka.

note: Type: multiselect Description :sl2:
en: Partitions to assemble:
hr: Particije za sastaviti:

note: Type: multiselect Description :sl2:
en: Select the partitions to assemble into a RAID array. If you select "Automatic", then all devices containing RAID physical volumes will be scanned and assembled.
hr: Izaberite particije od kojih će biti sastavljeno RAID polje. Ako izaberete "Automatski", svi će se uređaji koji sadrže fizičke RAID prostore pregledati i sastaviti.

note: Type: multiselect Description :sl2:
en: Note that a RAID partition at the end of a disk may sometimes cause that disk to be mistakenly detected as containing a RAID physical volume. In that case, you should select the appropriate partitions individually.
hr: Primijetite da RAID particija na kraju diska može uzrokovati neispravno otkrivanje RAID fizičkog prostora na disku. U tom slučaju, trebate pojedinačno izabrati prikladne particije.

note: Type: boolean Description :sl2:
en: Mount separate ${FILESYSTEM} partition?
hr: Montirati odvojenu ${FILESYSTEM} particiju?

note: Type: boolean Description :sl2:
en: The installed system appears to use a separate ${FILESYSTEM} partition.
hr: Čini se da instalirani sustav koristi odvojenu ${FILESYSTEM} particiju.

note: Type: boolean Description :sl2:
en: It is normally a good idea to mount it as it will allow operations such as reinstalling the boot loader. However, if the file system on ${FILESYSTEM} is corrupt then you may want to avoid mounting it.
hr: Obično je dobra ideja montirati ju jer će to omogućiti radnje poput ponovne instalacije boot učitavača. Međutim, ako je datotečni sustav na ${FILESYSTEM} oštećen, vjerojatno ju nećete htjeti montirati.

note: Type: select Choices Possible locations for debug logs to be saved :sl2:
en: floppy
hr: disketa

note: Type: select Choices Possible locations for debug logs to be saved :sl2:
en: mounted file system
hr: montirani datotečni sustav

note: Type: select Description :sl2:
en: How should the debug logs be saved or transferred?
hr: Kako treba sačuvati ili prenijeti 'debug' zapise?

note: Type: select Description :sl2:
en: Debugging log files for the installer can be saved to floppy, served up over the web, or saved to a mounted file system.
hr: Zapisi za debugiranje instalacijskog programa se mogu spremiti na disketu, poslužiti putem weba ili pohraniti na montirani datotečni sustav.

note: Type: string Description :sl2:
en: Directory in which to save debug logs:
hr: Direktorij u koji treba spremiti 'debug' zapise:

note: Type: string Description :sl2:
en: Please make sure the file system you want to save debug logs on is mounted before you continue.
hr: Molim provjerite je li datotečni sustav gdje želite spremiti 'debug' zapise montiran prije nego li nastavite.

note: Type: error Description :sl2:
en: Cannot save logs
hr: Nemoguće sačuvati zapise

note: Type: error Description :sl2:
en: The directory "${DIR}" does not exist.
hr: Direktorij "${DIR}" ne postoji.

note: Type: note Description :sl2:
en: Insert formatted floppy in drive
hr: Ubacite formatiranu disketu u pogon

note: Type: note Description :sl2:
en: Log files and debug info will be copied into this floppy.
hr: Datoteke zabilješki i 'debug' informacije će se spremiti na disketu.

note: Type: note Description :sl2:
en: The information will also be stored in /var/log/installer/ on the installed system.
hr: Ove obavijesti će se spremiti i u direktorij /var/log/installer/ na instaliranom sustavu.

note: Type: text Description Main menu item Translators: keep it under 65 columns :sl2:
en: Check the CD-ROM(s) integrity
hr: Provjeri potpunost CD-ROM-ova
