debian-installer - en to ga translation catalogue (48 entries)

note: Type: text Description :sl5:
en: ZFS pool %s, volume %s
ga: Linn ZFS %s, imleabhar %s

note: Type: text Description :sl5:
en: DASD %s (%s), partition #%s
ga: DASD %s (%s), deighilt #%s

note: Type: text Description :sl5: Setting to reserve a small part of the disk for use by BIOS-based bootloaders such as GRUB.
en: Reserved BIOS boot area
ga: Limistéar forchoimeádta tosaithe BIOS

note: Type: boolean Description :sl5:
en: Your boot partition has not been configured with the ext2 file system. This is needed by your machine in order to boot. Please go back and use the ext2 file system.
ga: Níor cumraíodh do dheighilt tosaithe leis an gcóras comhad ext2.  Ní mór duit an córas seo a úsáid chun do ríomhaire a thosú.  Téigh ar ais agus roghnaigh an córas ext2.

note: Type: boolean Description :sl5:
en: Your boot partition is not located on the first partition of your hard disk. This is needed by your machine in order to boot.  Please go back and use your first partition as a boot partition.
ga: Níl an deighilt tosaithe suite ar chéad deighilt do dhiosca crua.  Ní mór di a bheith ar an chéad deighilt chun an ríomhaire a thosú.  Téigh ar ais agus roghnaigh do chéad deighilt mar dheighilt tosaithe.

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl5:
en: ctc: Channel to Channel (CTC) or ESCON connection
ga: ctc: Cainéal-go-Cainéal (CTC) nó ceangal ESCON

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl5:
en: qeth: OSA-Express in QDIO mode / HiperSockets
ga: qeth: OSA-Express i mód QDIO / HiperSockets

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl5:
en: iucv: Inter-User Communication Vehicle - available for VM guests only
ga: iucv: Feithicil chumarsáide idir úsáideoirí - ar fáil d'aíonna VM amháin

note: Type: select Description :sl5:
en: Network device type:
ga: Cineál an ghléis líonra:

note: Type: select Description :sl5:
en: Please choose the type of your primary network interface that you will need for installing the Debian system (via NFS or HTTP). Only the listed devices are supported.
ga: Roghnaigh cineál an phríomhéadain líonra a úsáidfidh tú chun an córas Debian a shuiteáil (trí NFS nó HTTP). Ní thacaítear ach leis na gléasanna anseo.

note: Type: select Description :sl5:
en: CTC read device:
ga: Gléas léimh CTC:

note: Type: select Description :sl5:
en: The following device numbers might belong to CTC or ESCON connections.
ga: B'fhéidir gur le ceangail CTC nó ESCON iad na huimhreacha gléis seo a leanas.

note: Type: select Description :sl5:
en: CTC write device:
ga: Gléas scríofa CTC:

note: Type: boolean Description :sl5:
en: Do you accept this configuration?
ga: An nglacann tú leis an gcumraíocht seo?

note: Type: boolean Description :sl5:
en: The configured parameters are:
     read channel  = ${device_read}
     write channel = ${device_write}
     protocol      = ${protocol}
ga: Seo iad na paraiméadair chumraithe:
     cainéal léite   = ${device_read}
     cainéal scríofa = ${device_write}
     prótacal        = ${protocol}

note: Type: error Description :sl5:
en: No CTC or ESCON connections
ga: Gan cheangail CTC nó ESCON

note: Type: error Description :sl5:
en: Please make sure that you have set them up correctly.
ga: Bí cinnte go bhfuil siad socraithe agat mar is ceart.

note: Type: select Description :sl5:
en: Protocol for this connection:
ga: Prótacal don cheangal seo:

note: Type: select Description :sl5:
en: Device:
ga: Gléas:

note: Type: select Description :sl5:
en: Please select the OSA-Express QDIO / HiperSockets device.
ga: Roghnaigh an gléas OSA-Express QDIO / HiperSockets.

note: Type: boolean Description :sl5:
en: The configured parameters are:
     channels = ${device0}, ${device1}, ${device2}
     port     = ${port}
     layer2   = ${layer2}
ga: Seo iad na paraiméadair chumraithe:
     cainéil         = ${device0}, ${device1}, ${device2}
     port            = ${port}
     sraith2         = ${layer2}

note: Type: error Description :sl5:
en: No OSA-Express QDIO cards / HiperSockets
ga: Gan chártaí OSA-Express QDIO / HiperSockets

note: Type: error Description :sl5:
en: No OSA-Express QDIO cards / HiperSockets were detected. If you are running VM please make sure that your card is attached to this guest.
ga: Níor braitheadh aon chártaí OSA-Express QDIO / HiperSockets.  Má tá tú ag rith VM, bí cinnte go bhfuil do chárta ceangailte leis an aoi seo.

note: Type: string Description :sl5:
en: Please enter a relative port for this connection.
ga: Iontráil port coibhneasta don cheangal seo.

note: Type: boolean Description :sl5:
en: Use this device in layer2 mode?
ga: An bhfuil fonn ort an gléas seo a úsáid sa mhód sraith2?

note: Type: boolean Description :sl5:
en: By default OSA-Express cards use layer3 mode. In that mode LLC headers are removed from incoming IPv4 packets. Using the card in layer2 mode will make it keep the MAC addresses of IPv4 packets.
ga: Úsáideann cártaí OSA-Express mód layer3 de réir réamhshocraithe. Sa mhód sin, baintear ceanntásca LLC ó phaicéid IPv4 mar a thagann siad isteach. Má úsáideann tú an cárta sa mhód layer2, coinneoidh sé seoladh MAC de gach paicéad IPv4.

note: Type: boolean Description :sl5:
en: The configured parameter is:
     peer  = ${peer}
ga: Seo é an paraiméadar cumraithe:
     comhghleacaí  = ${peer}

note: Type: string Description :sl5:
en: VM peer:
ga: Comhghleacaí VM:

note: Type: string Description :sl5:
en: Please enter the name of the VM peer you want to connect to.
ga: Iontráil ainm an chomhghleacaí VM ar mian leat ceangal leis.

note: Type: string Description :sl5:
en: If you want to connect to multiple peers, separate the names by colons, e.g.  tcpip:linux1.
ga: Más mian leat ceangail a bhunú le comhghleacaithe éagsúla, dealaigh na hainmneacha le hidirstadanna, m.sh.  tcpip:linux1.

note: Type: string Description :sl5:
en: The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: IUCV must be enabled in the VM user directory for this driver to work and it must be set up on both ends of the communication.
ga: Is é 'TCPIP' gnáthainm an fhreastalaí TCP/IP ar VM; is é $TCPIP ar VIF. Nóta: Caithfidh tú IUCV a chumasú sa chomhadlann úsáideora VM chun an tiománaí seo a úsáid, agus ní mór é a shocrú ag an dá cheann cumarsáide.

note: Type: text Description Main menu item :sl5:
en: Configure the network device
ga: Cumraigh an gléas líonra

note: Type: select Description :sl5:
en: Available devices:
ga: Gléasanna le fáil:

note: Type: select Description :sl5:
en: The following direct access storage devices (DASD) are available. Please select each device you want to use one at a time.
ga: Tá na gléasanna stórála dír-rochtana (DASD) seo a leanas ar fáil. Roghnaigh na gléasanna is mian leat úsáid, ceann ar cheann.

note: Type: select Description :sl5:
en: Select "Finish" at the bottom of the list when you are done.
ga: Roghnaigh "Críochnaigh" ag bun an liosta nuair a bheidh tú críochnaithe.

note: Type: string Description :sl5:
en: Choose device:
ga: Roghnaigh gléas:

note: Type: string Description :sl5:
en: Please choose a device. You have to specify the complete device number, including leading zeros.
ga: Roghnaigh gléas, le do thoil.  Caithfidh tú an uimhir iomlán ghléis a thabhairt, nialais chun tosaigh san áireamh.

note: Type: error Description :sl5:
en: Invalid device
ga: Gléas neamhbhailí

note: Type: error Description :sl5:
en: An invalid device number has been chosen.
ga: Roghnaíodh uimhir neamhbhailí ghléis.

note: Type: boolean Description :sl5:
en: Format the device?
ga: Formáidigh an gléas?

note: Type: boolean Description :sl5:
en: The DASD ${device} is already low-level formatted.
ga: Tá DASD ${device} formáidithe ag an íseal-leibhéal cheana.

note: Type: boolean Description :sl5:
en: Please choose whether you want to format again and remove any data on the DASD. Note that formatting a DASD might take a long time.
ga: An bhfuil fonn ort é a fhormáidiú arís agus na sonraí ar an DASD a scriosadh? Uaireanta, tógann sé tamall fada DASD a fhormáidiú.

note: Type: boolean Description :sl5:
en: The DASD ${device} is not low-level formatted. DASD devices must be formatted before you can create partitions.
ga: Níl an DASD ${device} formáidithe ag an íseal-leibhéal. Caithfidh tú gléasanna DASD a fhormáidiú sular féidir leat deighiltí a chruthú.

note: Type: error Description :sl5:
en: The DASD ${device} is in use
ga: Tá DASD ${device} in úsáid

note: Type: error Description :sl5:
en: Could not low-level format the DASD ${device} because the DASD is in use.  For example, the DASD could be a member of a mapped device in an LVM volume group.
ga: Níorbh fhéidir DASD ${device} a fhormáidiú ag an íseal-leibhéal toisc go bhfuil sé in úsáid. Mar shampla, b'fhéidir gur ball de ghléas mapáilte i ngrúpa imleabhar LVM.

note: Type: text Description :sl5:
en: Formatting ${device}...
ga: ${device} á fhormáidiú...

note: Type: text Description Main menu item. Keep translations below 55 columns :sl5:
en: Configure direct access storage devices (DASD)
ga: Cumraigh gléasanna stórála dír-rochtana (DASD)

note: Type: text Description Main menu item :sl5:
en: Install the ZIPL boot loader on a hard disk
ga: Suiteáil luchtóir tosaithe ZIPL ar dhiosca crua
