# translation of gl.po to Galician
# Galician messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# marce villarino <mvillarino@users.sourceforge.net>, 2009.
# Marce Villarino <mvillarino@gmail.com>, 2009.
# Jorge Barreiro <yortx.barry@gmail.com>, 2010, 2012, 2014, 2017.
msgid ""
msgstr ""
"Project-Id-Version: gl\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-06-15 02:14+0200\n"
"Last-Translator: Jorge Barreiro <xurxo@findomundo.es>\n"
"Language-Team: Galician <proxecto@trasno.net>\n"
"Language: gl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Lokalize 1.5\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"

#. Type: text
#. Description
#. eg. Virtual disk 1 (xvda)
#. :sl4:
#: ../partman-base.templates:64001
#, no-c-format
msgid "Virtual disk %s (%s)"
msgstr "Disco virtual %s (%s)"

#. Type: text
#. Description
#. eg. Virtual disk 1, partition #1 (xvda1)
#. :sl4:
#: ../partman-base.templates:65001
#, no-c-format
msgid "Virtual disk %s, partition #%s (%s)"
msgstr "Disco virtual %s, partición núm. %s (%s)"

#. Type: text
#. Description
#. :sl4:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:58001
msgid "acls - support POSIX.1e Access Control List"
msgstr "acls - permite utilizar as listas de control de acceso POSIX.1e"

#. Type: text
#. Description
#. :sl4:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:59001
msgid "shortnames - only use the old MS-DOS 8.3 style filenames"
msgstr "nomes cortos - usar só nomes ao estilo do vello MS-DOS 8.3"

#. Type: text
#. Description
#. :sl4:
#: ../partman-target.templates:3001
msgid ""
"In order to start your new system, a so called boot loader is used.  It is "
"installed in a boot partition.  You must set the bootable flag for the "
"partition.  Such a partition will be marked with \"${BOOTABLE}\" in the main "
"partitioning menu."
msgstr ""
"Para iniciar o novo sistema emprégase un cargador de arranque, que se "
"instala nunha partición de arranque. Debe estabelecerse o indicador de "
"arranque na partición; esta partición hase marcar con «${BOOTABLE}» no menú "
"principal de particionamento."

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:1001
#, no-c-format
msgid "!! ERROR: %s"
msgstr "!! ERRO: %s"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:2001
msgid "KEYSTROKES:"
msgstr "TECLAS:"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:3001
#, no-c-format
msgid "'%c'"
msgstr "«%c»"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:4001
msgid "Display this help message"
msgstr "Mostrar esta mensaxe de axuda"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:5001
msgid "Go back to previous question"
msgstr "Voltar á pregunta anterior"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:6001
msgid "Select an empty entry"
msgstr "Escoller unha entrada baleira"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:7001
#, no-c-format
msgid "Other choices are available with '%c' and '%c'"
msgstr "Hai outras opcións dispoñíbeis con «%c» e «%c»"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:8001
#, no-c-format
msgid "Previous choices are available with '%c'"
msgstr "As opcións anteriores están dispoñíbeis con «%c»."

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:9001
#, no-c-format
msgid "Next choices are available with '%c'"
msgstr "As opcións seguintes están dispoñíbeis con «%c»"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:12001
#, no-c-format
msgid "Prompt: '%c' for help, default=%d> "
msgstr "Indicador: «%c» para axuda, por omisión=%d> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:13001
#, no-c-format
msgid "Prompt: '%c' for help> "
msgstr "Indicador: «%c» para axuda> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:14001
#, no-c-format
msgid "Prompt: '%c' for help, default=%s> "
msgstr "Indicador: «%c» para axuda, por omisión=%s> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:15001
msgid "[Press enter to continue]"
msgstr "[Prema Intro para continuar]"

#. Type: select
#. Description
#. :sl4:
#: ../cdebconf.templates:1001
msgid "Interface to use:"
msgstr "Interface a empregar:"

#. Type: select
#. Description
#. :sl4:
#: ../cdebconf.templates:1001
msgid ""
"Packages that use debconf for configuration share a common look and feel. "
"You can select the type of user interface they use."
msgstr ""
"Os paquetes que empregan debconf para a configuración comparten unha "
"aparencia común. Pode escoller o tipo de interface de usuario que empregan."

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:2001
msgid "None"
msgstr "Ningunha"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:2001
msgid "'None' will never ask you any question."
msgstr "«Ningunha» non lle preguntará nunca nada."

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:3001
msgid "Text"
msgstr "Texto"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:3001
msgid "'Text' is a traditional plain text interface."
msgstr "«Texto» é unha interface tradicional en texto plano."

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:4001
msgid "Newt"
msgstr "Newt"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:4001
msgid "'Newt' is a full-screen, character based interface."
msgstr "«Newt» é unha interface a pantalla completa baseada en caracteres."

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:5001
msgid "GTK"
msgstr "GTK"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:5001
msgid ""
"'GTK' is a graphical interface that may be used in any graphical environment."
msgstr ""
"«GTK» é unha interface gráfica que pode ser usada en calquera ambiente "
"gráfico."

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Failed to mount /target/proc"
msgstr "Non foi posíbel montar /target/proc"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Mounting the proc file system on /target/proc failed."
msgstr "Non foi posíbel montar o sistema de ficheiros proc en /target/proc ."

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Warning: Your system may be unbootable!"
msgstr "Aviso: o sistema pode non ser arrincábel!"

#. Type: note
#. Description
#. :sl4:
#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001 ../nobootloader.templates:4001
msgid "Setting firmware variables for automatic boot"
msgstr ""
"Estase a configurar as variábeis do firmware para o arranque automático"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001
msgid ""
"Some variables need to be set in the Genesi firmware in order for your "
"system to boot automatically.  At the end of the installation, the system "
"will reboot.  At the firmware prompt, set the following firmware variables "
"to enable auto-booting:"
msgstr ""
"É necesario estabelecer algunhas variábeis no firmware Genesi para que o "
"sistema arrinque automaticamente. Ao rematar a instalación, o sistema hase "
"reiniciar. No indicativo do firmware, estabeleza as seguintes variábeis do "
"firmware para permitir o arrinque automático:"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../nobootloader.templates:3001 ../arcboot-installer.templates:5001
msgid ""
"You will only need to do this once.  Afterwards, enter the \"boot\" command "
"or reboot the system to proceed to your newly installed system."
msgstr ""
"Só ha ter que facer isto unha vez. Despois, introduza a orde «boot» ou "
"reinicie o sistema para arrincar o sistema que acaba de instalar."

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001
msgid ""
"Alternatively, you will be able to boot the kernel manually by entering, at "
"the firmware prompt:"
msgstr ""
"De xeito alternativo, ha poder iniciar o núcleo manualmente introducindo no "
"indicador do firmware:"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"Some variables need to be set in CFE in order for your system to boot "
"automatically. At the end of installation, the system will reboot. At the "
"firmware prompt, set the following variables to simplify booting:"
msgstr ""
"É necesario estabelecer algunhas variábeis en CFE para que o sistema "
"arrinque automaticamente. Ao rematar a instalación, o sistema hase "
"reiniciar. No indicador do firmware, estabeleza as seguintes para "
"simplificar o arrinque:"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"You will only need to do this once. This enables you to just issue the "
"command \"boot_debian\" at the CFE prompt."
msgstr ""
"Só ha ter que facer isto unha vez. Isto halle permitir empregar a orde "
"«boot_debian» no indicador de CFE."

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"If you prefer to auto-boot on every startup, you can set the following "
"variable in addition to the ones above:"
msgstr ""
"Se prefire iniciar automaticamente ao arrincar o ordenador, pode estabelecer "
"a seguinte variábel ademais das de enriba:"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid "Install GRUB?"
msgstr "Quere instalar GRUB?"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid ""
"GRUB 2 is the next generation of GNU GRUB, the boot loader that is commonly "
"used on i386/amd64 PCs. It is now also available for ${ARCH}."
msgstr ""
"GRUB 2 é a nova xeración de GNU GRUB, o cargador de arranque que se usa "
"normalmente en computadores i386 e amd64. Agora tamén está dispoñíbel para "
"${ARCH}."

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid ""
"It has interesting new features but is still experimental software for this "
"architecture. If you choose to install it, you should be prepared for "
"breakage, and have an idea on how to recover your system if it becomes "
"unbootable. You're advised not to try this in production environments."
msgstr ""
"Ten funcionalidades interesantes, pero aínda é software experimental para "
"esta arquitectura. Se escolle instalalo, debe estar preparado para fallos, e "
"saber como recuperar o sistema se non pode arrancar. Aconsellámoslle non "
"usar isto en ambientes de produción."

#. Type: text
#. Description
#. :sl4:
#: ../arcboot-installer.templates:1001
msgid "Install the Arcboot boot loader on a hard disk"
msgstr "Instalar o cargador de arranque Arcboot no disco duro"

#. Type: string
#. Description
#. :sl4:
#: ../arcboot-installer.templates:2001
msgid "Disk for boot loader installation:"
msgstr "Disco para a instalación do cargador de arranque:"

#. Type: string
#. Description
#. :sl4:
#: ../arcboot-installer.templates:2001
msgid ""
"Arcboot must be installed into the volume header of a disk with a SGI "
"disklabel. Usually the volume header of /dev/sda is used. Please give the "
"device name of the disk on which to put arcboot."
msgstr ""
"Arcboot débese instalar na cabeceira de volume dun disco con etiqueta de "
"disco SGI. Normalmente emprégase a cabeceira de volume de /dev/sda. "
"Introduza o nome de dispositivo no disco no que poñer arcboot."

#. Type: note
#. Description
#. :sl4:
#: ../arcboot-installer.templates:3001
msgid "Arcboot configured to use a serial console"
msgstr "Arcboot está configurado para utilizar unha consola serie"

#. Type: note
#. Description
#. :sl4:
#: ../arcboot-installer.templates:3001
msgid ""
"Arcboot is configured to use the serial port ${PORT} as the console. The "
"serial port speed is set to ${SPEED}."
msgstr ""
"Arcboot está configurado para empregar o porto serie ${PORT} como consola. A "
"velocidade do porto serie está estabelecida a ${SPEED}."

#. Type: boolean
#. Description
#. :sl4:
#: ../arcboot-installer.templates:4001
msgid "Arcboot installation failed.  Continue anyway?"
msgstr "Fallou a instalación de arcboot. Desexa continuar aínda así?"

#. Type: boolean
#. Description
#. :sl4:
#: ../arcboot-installer.templates:4001
msgid ""
"The arcboot package failed to install into /target/.  Installing Arcboot as "
"a boot loader is a required step.  The install problem might however be "
"unrelated to Arcboot, so continuing the installation may be possible."
msgstr ""
"Non foi posíbel instalar o paquete arcboot en /target/. A instalación de "
"Arcboot como cargador de arranque é un paso necesario. O problema coa "
"instalación pode non estar relacionado con Arcboot, polo que sería posíbel "
"continuar a instalación."

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:5001
msgid "Setting PROM variables for Arcboot"
msgstr "A estabelecer as variábeis da PROM para Arcboot"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:5001
msgid ""
"If this is the first Linux installation on this machine, or if the hard "
"drives have been repartitioned, some variables need to be set in the PROM "
"before the system is able to boot normally."
msgstr ""
"Se esta é a primeira instalación de Linux nesta máquina, ou se se "
"reparticionaron os discos duros, hai que estabelecer algunhas variábeis na "
"PROM antes de que o sistema poida iniciarse correctamente."

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#. "Stop for Maintenance" should be left in English
#: ../arcboot-installer.templates:5001
msgid ""
"At the end of this installation stage, the system will reboot.  After this, "
"enter the command monitor from the \"Stop for Maintenance\" option, and "
"enter the following commands:"
msgstr ""
"Ao rematar esta etapa da instalación, o sistema hase reiniciar. Despois "
"disto, introduza o monitor de ordes na opción «Stop for Maintenance» e "
"introduza as seguintes ordes:"

#. Type: text
#. Description
#. :sl4:
#: ../partman-nbd.templates:1001
msgid "Configure the Network Block Device"
msgstr "Configurar o «Network Block Device» (dispositivo de bloques en rede)"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:2001
msgid "NBD configuration action:"
msgstr "Acción da configuración de NBD:"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:2001
msgid "There are currently ${NUMBER} devices connected."
msgstr "Actualmente hai ${NUMBER} dispositivos conectados."

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:3001
msgid "Network Block Device server:"
msgstr "Servidor «Network Block Device»:"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:3001
msgid ""
"Please enter the host name or the IP address of the system running nbd-"
"server."
msgstr ""
"Escriba o nome da máquina ou a dirección IP do sistema que estea a executar "
"«nbd-server»."

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:4001
msgid "Name for NBD export"
msgstr "Nome da exportación NBD"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:4001
msgid ""
"Please enter the NBD export name needed to access nbd-server. The name "
"entered here should match an existing export on the server."
msgstr ""
"Introduza o nome da exportación NBD necesaria para acceder ó servidor nbd "
"(nbd-server). O nome que aquí se introduza debe coincidir cunha exportación "
"existente no servidor."

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:5001
msgid "Network Block Device device node:"
msgstr "Nodo de dispositivo «Network Block Device»:"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:5001
msgid ""
"Please select the NBD device node that you wish to connect or disconnect."
msgstr "Escolla o nodo de dispositivo NBD  que quere conectar ou desconectar."

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:6001
msgid "Failed to connect to the NBD server"
msgstr "Non foi posíbel conectar co servidor NBD"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:6001
msgid ""
"Connecting to the nbd-server failed. Please ensure that the host and the "
"export name which you entered are correct, that the nbd-server process is "
"running on that host, that the network is configured correctly, and retry."
msgstr ""
"Non se puido conectar co servidor «nbd-server». Asegúrese de que a máquina e "
"o nome da exportación que introduciu sexan correctos, de que o proceso «nbd-"
"server» se estea executando nesa máquina, de que a rede está correctamente "
"configurada e ténteo de novo."

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid "No more Network Block Device nodes left"
msgstr "Non quedan máis nodos de «Network Block Device»"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid ""
"Either all available NBD device nodes are in use or something went wrong "
"with the detection of the device nodes."
msgstr ""
"Ou ben tódolos nodos de dispositivo NBD dispoñíbeis están en uso ou algo "
"fallou na detección dos nodos de dispositivo."

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid ""
"No more NBD device nodes can be configured until a configured one is "
"disconnected."
msgstr ""
"Non se poden configurar máis nodos de dispositivo NBD ata que se desconecte "
"algún dos configurados."

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:8001
msgid "No connected Network Block Device nodes were found"
msgstr "Non se atoparon nodos de dispositivo «Network Block Device» conectados"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:8001
msgid ""
"There are currently no Network Block Device nodes connected to any server. "
"As such, you can't disconnect any of them."
msgstr ""
"Non hai ningún nodo de dispositivo «Network Block Device» conectado a ningún "
"servidor agora mesmo. Por tanto, non pode desconectar ningún."

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:9001
msgid "Connect a Network Block Device"
msgstr "Conectar un «Network Block Device»"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:10001
msgid "Disconnect a Network Block Device"
msgstr "Desconectar un «Network Block Device»"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:11001
msgid "Finish and return to the partitioner"
msgstr "Desexa voltar ao menú do xestor de particións?"

#. Type: text
#. Description
#. This item is a progress bar heading when the system configures
#. some flashable memory used by many embedded devices
#. :sl4:
#: ../flash-kernel-installer.templates:1001
msgid "Configuring flash memory to boot the system"
msgstr "Estase a configurar a memoria flash para que inicie o sistema"

#. Type: text
#. Description
#. This item is a progress bar heading when an embedded device is
#. configured so it will boot from disk
#. :sl4:
#: ../flash-kernel-installer.templates:2001
msgid "Making the system bootable"
msgstr "Estase a facer que se poida iniciar o sistema"

#. Type: text
#. Description
#. This is "preparing the system" to flash the kernel and initrd
#. on a flashable memory
#. :sl4:
#: ../flash-kernel-installer.templates:3001
msgid "Preparing the system..."
msgstr "Estase a preparar o sistema..."

#. Type: text
#. Description
#. This is a progress bar showing up when the system
#. write the kernel to the flashable memory of the embedded device
#. :sl4:
#: ../flash-kernel-installer.templates:4001
msgid "Writing the kernel to flash memory..."
msgstr "Estase a gardar o núcleo na memoria flash..."

#. Type: text
#. Description
#. This is a progress bar showing up when the system generates a
#. special boot image on disk for some embedded device so they
#. can boot.
#. :sl4:
#: ../flash-kernel-installer.templates:5001
msgid "Generating boot image on disk..."
msgstr "Estase a xerar a imaxe de inicio no disco..."

#. Type: text
#. Description
#. Main menu item
#. This item is a menu entry for a step where the system configures
#. the flashable memory used by many embedded devices
#. (writing the kernel and initrd to it)
#. :sl4:
#: ../flash-kernel-installer.templates:6001
msgid "Make the system bootable"
msgstr "Facer que se poida iniciar o sistema"