# Traditional Chinese messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-06-06 13:04+0800\n"
"Last-Translator: Yao Wei (魏銘廷) <mwei@lxde.org>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"Language: zh\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.11\n"

#. Type: text
#. Description
#. eg. Virtual disk 1 (xvda)
#. :sl4:
#: ../partman-base.templates:64001
#, no-c-format
msgid "Virtual disk %s (%s)"
msgstr "虛擬磁碟 %s (%s)"

#. Type: text
#. Description
#. eg. Virtual disk 1, partition #1 (xvda1)
#. :sl4:
#: ../partman-base.templates:65001
#, no-c-format
msgid "Virtual disk %s, partition #%s (%s)"
msgstr "虛擬磁碟 %s，第 %s 分割區 (%s)"

#. Type: text
#. Description
#. :sl4:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:58001
msgid "acls - support POSIX.1e Access Control List"
msgstr "acls - 支援 POSIX.1e 存取控管表"

#. Type: text
#. Description
#. :sl4:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:59001
msgid "shortnames - only use the old MS-DOS 8.3 style filenames"
msgstr "shortnames - 使用舊式 MS-DOS 8.3 格式的檔案名稱"

#. Type: text
#. Description
#. :sl4:
#: ../partman-target.templates:3001
msgid ""
"In order to start your new system, a so called boot loader is used.  It is "
"installed in a boot partition.  You must set the bootable flag for the "
"partition.  Such a partition will be marked with \"${BOOTABLE}\" in the main "
"partitioning menu."
msgstr ""
"您的新系統還必須藉助於開機程式才能夠啟動。您必須將該分割區設定為「啟動」﹔而"
"在主要磁碟分割選單中，這樣的分割區將被標示為 \"${BOOTABLE}\"。"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:1001
#, no-c-format
msgid "!! ERROR: %s"
msgstr "[!! 錯誤]：%s"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:2001
msgid "KEYSTROKES:"
msgstr "[鍵擊]："

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:3001
#, no-c-format
msgid "'%c'"
msgstr "「%c」"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:4001
msgid "Display this help message"
msgstr "顯示這個求助資訊"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:5001
msgid "Go back to previous question"
msgstr "回到上一個問題"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:6001
msgid "Select an empty entry"
msgstr "選擇一個空項目"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:7001
#, no-c-format
msgid "Other choices are available with '%c' and '%c'"
msgstr "'%c' 與 '%c' 可選擇其他選項"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:8001
#, no-c-format
msgid "Previous choices are available with '%c'"
msgstr "'%c' 可選擇上一個選項"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:9001
#, no-c-format
msgid "Next choices are available with '%c'"
msgstr "'%c' 可選擇下一個選項"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:12001
#, no-c-format
msgid "Prompt: '%c' for help, default=%d> "
msgstr "提示：按 '%c' 求助，預設為：%d> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:13001
#, no-c-format
msgid "Prompt: '%c' for help> "
msgstr "提示：按 '%c' 求助> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:14001
#, no-c-format
msgid "Prompt: '%c' for help, default=%s> "
msgstr "提示：按 '%c' 求助，預設為：%s> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:15001
msgid "[Press enter to continue]"
msgstr "[按 enter 鍵繼續]"

#. Type: select
#. Description
#. :sl4:
#: ../cdebconf.templates:1001
msgid "Interface to use:"
msgstr "要使用的介面："

#. Type: select
#. Description
#. :sl4:
#: ../cdebconf.templates:1001
msgid ""
"Packages that use debconf for configuration share a common look and feel. "
"You can select the type of user interface they use."
msgstr ""
"使用 debconf 來進行設定的套件有共同的外觀及風格。您可以指定它們用的使用者介面"
"類型。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:2001
msgid "None"
msgstr "無"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:2001
msgid "'None' will never ask you any question."
msgstr "無 — 不會詢問您任何問題。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:3001
msgid "Text"
msgstr "文字"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:3001
msgid "'Text' is a traditional plain text interface."
msgstr "文字 — 傳統純文字介面。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:4001
msgid "Newt"
msgstr "Newt"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:4001
msgid "'Newt' is a full-screen, character based interface."
msgstr "Newt — 全螢幕的文字介面。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:5001
msgid "GTK"
msgstr "GTK"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:5001
msgid ""
"'GTK' is a graphical interface that may be used in any graphical environment."
msgstr "GTK — 圖形介面，可用於任何圖形環境。"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Failed to mount /target/proc"
msgstr "無法掛載 /target/proc"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Mounting the proc file system on /target/proc failed."
msgstr "在將 proc 檔案系統掛載至 /target/proc 上時失敗了。"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Warning: Your system may be unbootable!"
msgstr "警告：您的系統可能會無法開機！"

#. Type: note
#. Description
#. :sl4:
#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001 ../nobootloader.templates:4001
msgid "Setting firmware variables for automatic boot"
msgstr "替自動開機設定韌體變數"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001
msgid ""
"Some variables need to be set in the Genesi firmware in order for your "
"system to boot automatically.  At the end of the installation, the system "
"will reboot.  At the firmware prompt, set the following firmware variables "
"to enable auto-booting:"
msgstr ""
"您必須在 Genesi 的韌體中設定一些變數才能讓您的系統能夠自動開機。在安裝結束"
"後，系統將會重新開機。之後，在韌體的提示文字上，設定以下的韌體變數來啟用自動"
"開機："

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../nobootloader.templates:3001 ../arcboot-installer.templates:5001
msgid ""
"You will only need to do this once.  Afterwards, enter the \"boot\" command "
"or reboot the system to proceed to your newly installed system."
msgstr ""
"這個動作只需進行一次。之後，輸入 boot 指令或重新啟動系統就能進入您新安裝好的"
"系統。"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001
msgid ""
"Alternatively, you will be able to boot the kernel manually by entering, at "
"the firmware prompt:"
msgstr ""
"而或者，您也可以藉由手動來讓 Kernel 開機，方法是在韌體的提示文字上輸入："

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"Some variables need to be set in CFE in order for your system to boot "
"automatically. At the end of installation, the system will reboot. At the "
"firmware prompt, set the following variables to simplify booting:"
msgstr ""
"您必須在 CFE 中設定一些變數才能讓您的系統能夠自動開機。在安裝結束後，系統將會"
"重新開機。之後，在韌體的提示文字上，設定以下的變數來簡化開機流程："

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"You will only need to do this once. This enables you to just issue the "
"command \"boot_debian\" at the CFE prompt."
msgstr ""
"這個動作只需進行一次。以後，您只要在 CFE 的提示文字下達 \"boot_debian\" 指令"
"即可。"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"If you prefer to auto-boot on every startup, you can set the following "
"variable in addition to the ones above:"
msgstr ""
"如果您希望每次啟動時都能夠自動開機，您可以在上文所提到的變數之後再添加以下變"
"數："

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid "Install GRUB?"
msgstr "安裝 GRUB 開機程式？"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid ""
"GRUB 2 is the next generation of GNU GRUB, the boot loader that is commonly "
"used on i386/amd64 PCs. It is now also available for ${ARCH}."
msgstr ""
"GRUB 2 是 GNU GRUB 的下一代，常見於 i386 與 amd64 的個人電腦。現在也可以在 "
"${ARCH} 中使用。"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid ""
"It has interesting new features but is still experimental software for this "
"architecture. If you choose to install it, you should be prepared for "
"breakage, and have an idea on how to recover your system if it becomes "
"unbootable. You're advised not to try this in production environments."
msgstr ""
"它具有一些有趣的新功能，但是在您的電腦架構中 GRUB 2 依然是實驗中的軟體。如果"
"您決定要安裝，您應該要有這個系統隨時會壞掉的覺悟，並了解在無法開機的狀況如何"
"復原您的系統。建議請勿在正式使用的主機上使用 GRUB 2。"

#. Type: text
#. Description
#. :sl4:
#: ../arcboot-installer.templates:1001
msgid "Install the Arcboot boot loader on a hard disk"
msgstr "將 Arcboot 開機程式安裝至硬碟上"

#. Type: string
#. Description
#. :sl4:
#: ../arcboot-installer.templates:2001
msgid "Disk for boot loader installation:"
msgstr "用來安裝開機程式的磁碟："

#. Type: string
#. Description
#. :sl4:
#: ../arcboot-installer.templates:2001
msgid ""
"Arcboot must be installed into the volume header of a disk with a SGI "
"disklabel. Usually the volume header of /dev/sda is used. Please give the "
"device name of the disk on which to put arcboot."
msgstr ""
"Arcboot 必須安裝在具有 SGI 磁碟標籤的磁碟的磁碟組開頭部位，一般使用的就是 /"
"dev/sda。請輸入要安裝 arcboot 的磁碟裝置名稱。"

#. Type: note
#. Description
#. :sl4:
#: ../arcboot-installer.templates:3001
msgid "Arcboot configured to use a serial console"
msgstr "Arcboot 被設定為使用串列主控台"

#. Type: note
#. Description
#. :sl4:
#: ../arcboot-installer.templates:3001
msgid ""
"Arcboot is configured to use the serial port ${PORT} as the console. The "
"serial port speed is set to ${SPEED}."
msgstr ""
"Arcboot 被設定為使用串列埠 ${PORT} 作為主控台。串列埠速度則被設定為 "
"${SPEED}。"

#. Type: boolean
#. Description
#. :sl4:
#: ../arcboot-installer.templates:4001
msgid "Arcboot installation failed.  Continue anyway?"
msgstr "Arcboot 的安裝失敗了。是否無論如何仍然繼續？"

#. Type: boolean
#. Description
#. :sl4:
#: ../arcboot-installer.templates:4001
msgid ""
"The arcboot package failed to install into /target/.  Installing Arcboot as "
"a boot loader is a required step.  The install problem might however be "
"unrelated to Arcboot, so continuing the installation may be possible."
msgstr ""
"無法將 arcboot 套件安裝至 /target/。安裝 Arcboot 以作為開機程式乃是不可或缺的"
"步驟﹔然而，可能並不是因為 Arcboot 套件才導致安裝失敗的，所以繼續進行安裝作業"
"或許是無妨的。"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:5001
msgid "Setting PROM variables for Arcboot"
msgstr "為 Arcboot 設定 PROM 變數"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:5001
msgid ""
"If this is the first Linux installation on this machine, or if the hard "
"drives have been repartitioned, some variables need to be set in the PROM "
"before the system is able to boot normally."
msgstr ""
"如果這是這台機器第一次安裝 Linux，或是這個硬碟已重新進行磁碟分割，那麼必須再"
"設定 PROM 中的某些變數才能讓系統能夠正常開機。"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#. "Stop for Maintenance" should be left in English
#: ../arcboot-installer.templates:5001
msgid ""
"At the end of this installation stage, the system will reboot.  After this, "
"enter the command monitor from the \"Stop for Maintenance\" option, and "
"enter the following commands:"
msgstr ""
"在此安裝階段結束之時，系統將會重新啟動。然後，請藉由【Stop for Maintenance】"
"選項來進入命令列畫面，並輸入以下的指令："

#. Type: text
#. Description
#. :sl4:
#: ../partman-nbd.templates:1001
msgid "Configure the Network Block Device"
msgstr "設定網路區塊裝置"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:2001
msgid "NBD configuration action:"
msgstr "網路區塊裝置的設定動作："

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:2001
msgid "There are currently ${NUMBER} devices connected."
msgstr "現在有 ${NUMBER} 個裝置已經連線。"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:3001
msgid "Network Block Device server:"
msgstr "網路區塊裝置伺服器："

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:3001
msgid ""
"Please enter the host name or the IP address of the system running nbd-"
"server."
msgstr "請輸入執行 nbd-server 的主機名稱或是 IP。"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:4001
msgid "Name for NBD export"
msgstr "NBD export 名稱"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:4001
msgid ""
"Please enter the NBD export name needed to access nbd-server. The name "
"entered here should match an existing export on the server."
msgstr ""
"請輸入連結 nbd-server 所需的 NBD export 名稱。該名稱應該要符合目前在 server "
"中的 export。"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:5001
msgid "Network Block Device device node:"
msgstr "網路區塊裝置節點："

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:5001
msgid ""
"Please select the NBD device node that you wish to connect or disconnect."
msgstr "請選擇您想連線或是斷線的網路區塊裝置節點。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:6001
msgid "Failed to connect to the NBD server"
msgstr "無法連線到這個網路區塊裝置"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:6001
msgid ""
"Connecting to the nbd-server failed. Please ensure that the host and the "
"export name which you entered are correct, that the nbd-server process is "
"running on that host, that the network is configured correctly, and retry."
msgstr ""
"與 nbd-server 連接失敗。請確認您輸入的主機名稱或 export 名稱是正確的，確認該"
"主機是否執行 nbd-server 程序，確認該位置的網路是否正確設定，並且重試。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid "No more Network Block Device nodes left"
msgstr "已經沒有剩餘的網路區塊裝置節點"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid ""
"Either all available NBD device nodes are in use or something went wrong "
"with the detection of the device nodes."
msgstr "所有的網路區塊裝置節點都已經被使用，或是裝置節點的偵測出了問題。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid ""
"No more NBD device nodes can be configured until a configured one is "
"disconnected."
msgstr "直到有一個已經設定好的節點斷線前，已經沒有其他網路裝置節點可以設定。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:8001
msgid "No connected Network Block Device nodes were found"
msgstr "找不到已連結的網路區塊裝置節點"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:8001
msgid ""
"There are currently no Network Block Device nodes connected to any server. "
"As such, you can't disconnect any of them."
msgstr ""
"目前沒有任何網路區塊裝置節點連接到任何伺服器上，因此您無法將任何節點斷線。"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:9001
msgid "Connect a Network Block Device"
msgstr "設定網路區塊裝置"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:10001
msgid "Disconnect a Network Block Device"
msgstr "將網路區塊裝置斷線"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:11001
msgid "Finish and return to the partitioner"
msgstr "完成並返回至磁碟分割"

#. Type: text
#. Description
#. This item is a progress bar heading when the system configures
#. some flashable memory used by many embedded devices
#. :sl4:
#: ../flash-kernel-installer.templates:1001
msgid "Configuring flash memory to boot the system"
msgstr "設定快閃記憶體，讓系統能夠開機"

#. Type: text
#. Description
#. This item is a progress bar heading when an embedded device is
#. configured so it will boot from disk
#. :sl4:
#: ../flash-kernel-installer.templates:2001
msgid "Making the system bootable"
msgstr "讓系統能夠開機"

#. Type: text
#. Description
#. This is "preparing the system" to flash the kernel and initrd
#. on a flashable memory
#. :sl4:
#: ../flash-kernel-installer.templates:3001
msgid "Preparing the system..."
msgstr "正在進行系統的準備工作..."

#. Type: text
#. Description
#. This is a progress bar showing up when the system
#. write the kernel to the flashable memory of the embedded device
#. :sl4:
#: ../flash-kernel-installer.templates:4001
msgid "Writing the kernel to flash memory..."
msgstr "正將 Kernel 寫入快閃記憶體..."

#. Type: text
#. Description
#. This is a progress bar showing up when the system generates a
#. special boot image on disk for some embedded device so they
#. can boot.
#. :sl4:
#: ../flash-kernel-installer.templates:5001
msgid "Generating boot image on disk..."
msgstr "正在磁碟上產生開機影像..."

#. Type: text
#. Description
#. Main menu item
#. This item is a menu entry for a step where the system configures
#. the flashable memory used by many embedded devices
#. (writing the kernel and initrd to it)
#. :sl4:
#: ../flash-kernel-installer.templates:6001
msgid "Make the system bootable"
msgstr "讓系統能夠開機"