# translation of nb.po to Norwegian Bokmål
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Knut Yrvin <knuty@skolelinux.no>, 2004.
# Klaus Ade Johnstad <klaus@skolelinux.no>, 2004.
# Axel Bojer <axelb@skolelinux.no>, 2004.
# Bjørn Steensrud <bjornst@powertech.no>, 2004,2005, 2006, 2007.
# Hans Fredrik Nordhaug <hans@nordhaug.priv.no>, 2005, 2007, 2009-2015.
# Petter Reinholdtsen <pere@hungry.com>, 2017.
msgid ""
msgstr ""
"Project-Id-Version: nb\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-06-28 08:44+0200\n"
"Last-Translator: Petter Reinholdtsen <pere@hungry.com>\n"
"Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>\n"
"Language: nb\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Lokalize 1.5\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:60001
#, no-c-format
msgid "ZFS pool %s, volume %s"
msgstr "ZFS-pool %s, volum %s"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:62001
#, no-c-format
msgid "DASD %s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:63001
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr "DASD %s (%s), partisjon nr.%s"

#. Type: text
#. Description
#. :sl5:
#. Setting to reserve a small part of the disk for use by BIOS-based bootloaders
#. such as GRUB.
#: ../partman-partitioning.templates:32001
msgid "Reserved BIOS boot area"
msgstr "Reservert BIOS oppstartsområde"

#. Type: text
#. Description
#. :sl5:
#. short variant of 'Reserved BIOS boot area'
#. Up to 10 character positions
#: ../partman-partitioning.templates:33001
msgid "biosgrub"
msgstr "biosgrub"

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-basicfilesystems.templates:60001
msgid ""
"Your boot partition has not been configured with the ext2 file system. This "
"is needed by your machine in order to boot. Please go back and use the ext2 "
"file system."
msgstr ""
"Oppstartspartisjonen din er ikke satt opp med ext2-filsystemet. Maskinen "
"trenger dette for å kunne starte opp. Gå tilbake og bruk ext2-filsystemet."

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-basicfilesystems.templates:61001
msgid ""
"Your boot partition is not located on the first partition of your hard disk. "
"This is needed by your machine in order to boot.  Please go back and use "
"your first partition as a boot partition."
msgstr ""
"Oppstartspartisjonen din ligger ikke på den første partisjonen på "
"harddisken. Maskinen trenger dette for å kunne starte opp. Gå tilbake og "
"bruk den første partisjonen som oppstartspartisjon."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr "ctc: Kanal-til-kanal (CTC) eller ESCON-samband"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr "qeth: OSA-Express i QDIO-modus / HiperSockets"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr ""
"iucv: Sambandsmiddel for kommunikasjon mellom brukere - bare tilgjengelig "
"for VM-gjester"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr "virtio: KVM VirtIO"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr "Enhetstype for nettverk:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
"Velg den typen hoved-nettgrensesnitt du vil trenge for å installere Debian-"
"systemet (via NFS eller HTTP). Bare de listede enhetene er støttet."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr "CTC leseenhet:"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr "Følgende enhetsnumre kan høre til CTC eller ESCON-forbindelser."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr "CTC skriveenhet:"

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:12001
msgid "Do you accept this configuration?"
msgstr "Godtar du disse innstillingene?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""
"Parameterne i oppsettet er:\n"
" lesekanal   = ${device_read}\n"
" skrivekanal = ${device_write}\n"
" protokoll   = ${protocol}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr "Fant ingen CTC eller ESCON-forbindelser"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "Please make sure that you have set them up correctly."
msgstr "Sjekk at de er satt opp rett."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr "Protokoll for denne forbindelsen:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr "Enhet:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr "Velg enhet for OSA-Express QDIO / HiperSockets."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"
msgstr ""
"Parameterne i oppsettet er:\n"
" kanaler      = ${device0}, ${device1}, ${device2}\n"
" port         = ${port}\n"
" lag2.........= ${layer2}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr "Fant ingen OSA-Express QDIO-kort eller HiperSockets"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
"Fant ingen OSA-Express QDIO-kort / HiperSockets. Hvis du kjører VM, pass på "
"at kortet ditt er koblet til denne gjesten."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Port:"
msgstr "Port:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Please enter a relative port for this connection."
msgstr "Oppgi relativ port for denne forbindelsen."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Use this device in layer2 mode?"
msgstr "Skal denne enheten brukes i kjøremåte lag2?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
"OSA-Express-kort bruker som standard kjøremåte lag3. Da fjernes LLC-hodene "
"fra innkommende IPv4-pakker. Om kortet settes i kjøremåte lag2, så beholdes "
"MAC-adressene i IPv4-pakkene."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""
"Oppsettsparameterne er:\n"
" peer  = ${peer}"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "VM peer:"
msgstr "VM-motpart:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "Please enter the name of the VM peer you want to connect to."
msgstr "Skriv inn navnet på VM-tjeneren du vil koble deg til."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr ""
"Hvis du vil koble til flere tjenere, sett kolon mellom navnene, f.eks. "
"«tcpip:linux1»."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
"Standard tjenernavn for TCP/IP på VM er TCPIP, på VIF er det $TCPIP. Merk: "
"IUCV må være slått på i VM-brukerkatalogen for at denne driveren skal virke, "
"og det må være satt opp i begge ender av forbindelsen."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "Configure the network device"
msgstr "Sett opp nettverksenheten"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Available devices:"
msgstr "Tilgjengelige enheter:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid ""
"The following direct access storage devices (DASD) are available. Please "
"select each device you want to use one at a time."
msgstr ""
"Følgende lagringsenheter med direkte tilgang (DASD; Disk Access Storage "
"Device) er tilgjengelige. Velg hver enhet du skal bruke, en av gangen."

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Select \"Finish\" at the bottom of the list when you are done."
msgstr "Velg «Avslutt» nederst i lista når du er ferdig."

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid "Choose device:"
msgstr "Velg enhet:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid ""
"Please choose a device. You have to specify the complete device number, "
"including leading zeros."
msgstr ""
"Velg en enhet. Du må oppgi fullstendig enhetsnummer, ta med eventuelle "
"nuller foran navnet."

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "Invalid device"
msgstr "Ugyldig enhet"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "An invalid device number has been chosen."
msgstr "Du har valgt et ugyldig enhetsnummer."

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001 ../s390-dasd.templates:5001
msgid "Format the device?"
msgstr "Vil du formatere enheten?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid "The DASD ${device} is already low-level formatted."
msgstr "DASD-enheten ${device} er allerede lavnivåformattert."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"Please choose whether you want to format again and remove any data on the "
"DASD. Note that formatting a DASD might take a long time."
msgstr ""
"Velg hvorvidt du ønsker å formatere den på nytt og fjerne alle data på DASD-"
"en. Merk at formattering av en DASD kan ta lang tid."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:5001
msgid ""
"The DASD ${device} is not low-level formatted. DASD devices must be "
"formatted before you can create partitions."
msgstr ""
"DASD-enheten ${device} er ikke lavnivåformattert.  DASD-enheter må "
"formateres før du kan lage partisjoner."

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:6001
msgid "The DASD ${device} is in use"
msgstr "DASD-enheten ${device} er i bruk"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:6001
msgid ""
"Could not low-level format the DASD ${device} because the DASD is in use.  "
"For example, the DASD could be a member of a mapped device in an LVM volume "
"group."
msgstr ""
"Klarte ikke lavnivåformatere DASD-enheten ${device} på grunn av at DASD-en "
"er i bruk.  DASD-en kan for eksempel være medlem av en tilknyttet enhet i en "
"LVM-volumgruppe."

#. Type: text
#. Description
#. :sl5:
#: ../s390-dasd.templates:7001
msgid "Formatting ${device}..."
msgstr "Formaterer ${device} ..."

#. Type: text
#. Description
#. Main menu item. Keep translations below 55 columns
#. :sl5:
#: ../s390-dasd.templates:8001
msgid "Configure direct access storage devices (DASD)"
msgstr "Sett opp lagringsenheter med direkte tilgang (DASD)"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../zipl-installer.templates:1001
msgid "Install the ZIPL boot loader on a hard disk"
msgstr "Installer oppstartslasteren ZIPL på en harddisk"