# THIS FILE IS AUTOMATICALLY GENERATED FROM THE MASTER FILE
# packages/po/sv.po
#
# DO NOT MODIFY IT DIRECTLY : SUCH CHANGES WILL BE LOST
#
# Swedish messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Swedish translation by:
# Per Olofsson <pelle@debian.org>
# Daniel Nylander <po@danielnylander.se>, 2006.
# Martin Bagge <brother@bsnet.se>, 2016.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-11-27 16:57+0000\n"
"Last-Translator: Anders Jonsson <anders.jonsson@norsjovallen.se>\n"
"Language-Team: Swedish <debian-l10n-swedish@lists.debian.org>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 2.18-dev\n"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:60001
#, no-c-format
msgid "ZFS pool %s, volume %s"
msgstr "ZFS pool %s, volym %s"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:62001
#, no-c-format
msgid "DASD %s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:63001
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr "DASD %s (%s), partition %s"

#. Type: text
#. Description
#. :sl5:
#. Setting to reserve a small part of the disk for use by BIOS-based bootloaders
#. such as GRUB.
#: ../partman-partitioning.templates:32001
msgid "Reserved BIOS boot area"
msgstr "Reserverat BIOS-uppstartsutrymme"

#. Type: text
#. Description
#. :sl5:
#. short variant of 'Reserved BIOS boot area'
#. Up to 10 character positions
#: ../partman-partitioning.templates:33001
msgid "biosgrub"
msgstr "biosgrub"

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-basicfilesystems.templates:60001
msgid ""
"Your boot partition has not been configured with the ext2 file system. This "
"is needed by your machine in order to boot. Please go back and use the ext2 "
"file system."
msgstr ""
"Din startpartition har inte konfigurerats med filsystemet ext2. Det är "
"behövs för att din maskin ska kunna starta. Gå tillbaka och använd ext2 som "
"filsystem."

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-basicfilesystems.templates:61001
msgid ""
"Your boot partition is not located on the first partition of your hard disk. "
"This is needed by your machine in order to boot.  Please go back and use "
"your first partition as a boot partition."
msgstr ""
"Din startpartition ligger inte på den första partitionen på hårddisken. Det "
"är nödvändigt att den gör det för att din maskin ska kunna starta. Gå "
"tillbaka och välj den första partitionen som startpartition."

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr "ctc: Channel to Channel (CTC) eller ESCON-anslutning"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr "qeth: OSA-Express i QDIO-läge / HiperSockets"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr "iucv: Inter-User Communication Vehicle - endast för VM-gäster"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr "virtio: KVM VirtIO"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr "Typ av nätverksenhet:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
"Välj typen på ditt primära nätverksgränssnitt som du kommer att behöva för "
"att installera Debiansystemet (via NFS eller HTTP). Endast de enheter som "
"finns i listan stöds."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr "CTC-enhet för läsning:"

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr "Följande enhetsnummer kan tillhöra CTC- eller ESCON-anslutningar."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr "CTC-enhet för skrivning:"

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:12001
msgid "Do you accept this configuration?"
msgstr "Godkänner du den här konfigurationen?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""
"De konfigurerade parametrarna är:\n"
" läskanal  = ${device_read}\n"
" skrivkanal = ${device_write}\n"
" protokoll      = ${protocol}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr "Inga CTC- eller ESCON-anslutningar"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "Please make sure that you have set them up correctly."
msgstr "Se till att du har konfigurerat dem korrekt."

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr "Protokoll för den här anslutningen:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr "Enhet:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr "Välj OSA-Express QDIO- / HiperSockets-enhet."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"
msgstr ""
"De konfigurerade parametrarna är:\n"
" kanaler  = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr "Inga OSA-Express QDIO-kort / HiperSockets"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
"Inga OSA-Express QDIO-kort / HiperSockets identifierades.  Om du kör VM så "
"se till att ditt kort är anslutet till den här gästen."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Port:"
msgstr "Port:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Please enter a relative port for this connection."
msgstr "Ange en relativ port för den här anslutningen."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Use this device in layer2 mode?"
msgstr "Använd den här enheten i layer2-läge?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
"Som standard använder OSA-Express-kort layer3-läget. I det läget tas LLC-"
"huvuden bort från inkommande IPv4-paket. Användning av kortet i layer2-läge "
"innebär att MAC-adresserna för IPv4-paket behålls."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""
"Den konfigurerade parametern är:\n"
" peer  = ${peer}"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "VM peer:"
msgstr "VM-nod:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "Please enter the name of the VM peer you want to connect to."
msgstr "Ange namnet på VM-noden som du vill ansluta till."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr ""
"Om du vill ansluta till flera noder så skilj namnet åt med kolon. Exempelvis "
"tcpip:linux1."

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
"Det TCP/IP-servernamn som är standard på VM är TCPIP; på VIF är det $TCPIP. "
"Observera: IUCV måste vara aktiverat i VM-användarkatalogen för att den här "
"drivrutinen ska fungera och det måste vara konfigurerat på båda "
"kommunikationsändarna."

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "Configure the network device"
msgstr "Konfigurera nätverksenheten"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Available devices:"
msgstr "Tillgängliga enheter:"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid ""
"The following direct access storage devices (DASD) are available. Please "
"select each device you want to use one at a time."
msgstr ""
"Följande lagringsenheter med direktåtkomst (DASD) finns tillgängliga. Välj "
"de enheter som du vill använda, en åt gången."

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Select \"Finish\" at the bottom of the list when you are done."
msgstr "Välj \"Klar\" vid slutet av listan när du är klar."

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid "Choose device:"
msgstr "Välj enhet:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid ""
"Please choose a device. You have to specify the complete device number, "
"including leading zeros."
msgstr ""
"Välj en enhet. Du måste ange det fullständiga enhetsnumret, inklusive "
"inledande nollor."

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "Invalid device"
msgstr "Ogiltig enhet"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "An invalid device number has been chosen."
msgstr "Ett ogiltigt enhetsnummer valdes."

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001 ../s390-dasd.templates:5001
msgid "Format the device?"
msgstr "Formatera enheten?"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid "The DASD ${device} is already low-level formatted."
msgstr "DASD:en ${device} är redan lågnivåformaterad."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"Please choose whether you want to format again and remove any data on the "
"DASD. Note that formatting a DASD might take a long time."
msgstr ""
"Välj om du vill formatera igen och ta bort eventuella data på DASD:en. "
"Observera att det kan ta lång tid att formatera en DASD."

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:5001
msgid ""
"The DASD ${device} is not low-level formatted. DASD devices must be "
"formatted before you can create partitions."
msgstr ""
"DASD:en ${device} är inte lågnivåformaterad. DASD-enheter behöver formateras "
"innan du kan skapa partitioner."

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:6001
msgid "The DASD ${device} is in use"
msgstr "DASD:en ${device} används"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:6001
msgid ""
"Could not low-level format the DASD ${device} because the DASD is in use.  "
"For example, the DASD could be a member of a mapped device in an LVM volume "
"group."
msgstr ""
"Kunde inte lågnivåformatera DASD:en ${device} eftersom DASD:en används. DASD:"
"en kan exempelvis vara en medlem av en mappad enhet i en LVM-volymgrupp."

#. Type: text
#. Description
#. :sl5:
#: ../s390-dasd.templates:7001
msgid "Formatting ${device}..."
msgstr "Formaterar ${device}..."

#. Type: text
#. Description
#. Main menu item. Keep translations below 55 columns
#. :sl5:
#: ../s390-dasd.templates:8001
msgid "Configure direct access storage devices (DASD)"
msgstr "Konfigurera lagringsenheter med direktåtkomst (DASD)"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../zipl-installer.templates:1001
msgid "Install the ZIPL boot loader on a hard disk"
msgstr "Installera starthanteraren ZIPL på en hårddisk"