# Danish translation of administrivia.
# Copyright (C) 2022 Free Software Foundation, Inc.
# Joe Hansen <joedalton2@yahoo.dk>, 2014, 2015, 2016, 2018, 2022.
#
# nb skal preseeding oversættes?
#
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual_install-methods\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2023-12-17 23:04+0000\n"
"PO-Revision-Date: 2022-07-08 19:32+0000\n"
"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
"Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-xml2pot; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 4.7-dev\n"

#. Tag: title
#: install-methods.xml:5
#, no-c-format
msgid "Obtaining System Installation Media"
msgstr "Find systeminstallationsmedie"

#. Tag: title
#: install-methods.xml:12
#, no-c-format
msgid "Official &debian-gnu; installation images"
msgstr "Officielle &debian-gnu; installationsaftryk"

#. Tag: para
#: install-methods.xml:13
#, fuzzy, no-c-format
#| msgid ""
#| "By far the easiest way to install &debian-gnu; is from a set of official "
#| "&debian; installation images. You can buy a set of CDs/DVDs from a vendor "
#| "(see the <ulink url=\"&url-debian-cd-vendors;\">CD vendors page</ulink>). "
#| "You may also download the installation images from a &debian; mirror and "
#| "make your own set, if you have a fast network connection and a CD/DVD "
#| "burner (see the <ulink url=\"&url-debian-cd;\">Debian CD/DVD page</ulink> "
#| "and <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> for detailed "
#| "instructions). If you have such optical installation media, and they are "
#| "bootable on your machine<phrase arch=\"x86\">, which is the case on all "
#| "modern PCs</phrase>, you can skip right to <xref linkend=\"boot-installer"
#| "\"/>. Much effort has been expended to ensure the most-used files are on "
#| "the first CD and DVD image, so that a basic desktop installation can be "
#| "done with only the first DVD or - to a limited extent - even with only "
#| "the first CD image."
msgid ""
"By far the easiest way to install &debian-gnu; is from a set of official "
"&debian; installation images. You can buy a set of CDs/DVDs from a vendor "
"(see the <ulink url=\"&url-debian-cd-vendors;\">CD vendors page</ulink>). "
"You may also download the installation images from a &debian; mirror and "
"make your own set, if you have a fast network connection and a CD/DVD burner "
"(see the <ulink url=\"&url-debian-cd;\">Debian CD/DVD page</ulink> and "
"<ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> for detailed "
"instructions). If you have such optical installation media, and they are "
"bootable on your machine<phrase arch=\"x86\">, which is the case on all "
"modern PCs</phrase>, you can skip right to <xref linkend=\"boot-installer\"/"
">. Much effort has been expended to ensure the most-used files are on the "
"first DVD image, so that a basic desktop installation can be done with only "
"the first DVD."
msgstr ""
"Den bedste måde at installere &debian-gnu; er fra det officielle &debian;-"
"installationsaftryk. Du kan købe et sæt af cd'er/dvd'er fra en leverandør "
"(se <ulink url=\"&url-debian-cd-vendors;\">cd-leverandørsiden</ulink>). Du "
"kan også hente installationsaftrykket fra et &debian;-spejl og lave dit eget "
"sæt, hvis du har en hurtig netværksforbindelse og en cd/dvd-brænder (se "
"<ulink url=\"&url-debian-cd;\">Debians cd/dvd-side</ulink> og <ulink url="
"\"&url-debian-cd-faq;\">Debians OSS for cd</ulink> for detaljerede "
"instruktioner). Hvis du har et optisk installationsmedie og det startes op "
"på din maskine <phrase arch=\"x86\">, hvilket er tilfældet for alle moderne "
"pc'er</phrase>, så kan du gå direkte til <xref linkend=\"boot-installer\"/>. "
"Der er brugt en stor indsats for at sikre at de mest anvendte filer er på "
"den første cd eller dvd, så en installation af basissystemet kan udføres kun "
"med den første dvd eller - i begrænset omfang - selv med den første cd."

#. Tag: para
#: install-methods.xml:29
#, no-c-format
msgid ""
"Also, keep in mind: if the installation media you are using don't contain "
"some packages you need, you can always install those packages afterwards "
"from your running new Debian system (after the installation has finished). "
"If you need to know on which installation image to find a specific package, "
"visit <ulink url=\"https://cdimage-search.debian.org/\">https://cdimage-"
"search.debian.org/</ulink>."
msgstr ""
"Husk også: Hvis installationsmediet, du bruger, ikke indeholder de pakker, "
"du skal bruge, så kan du altid installere disse pakker efterfølgende fra dit "
"nye kørende Debiansystem (efter installationen er færdig). hvis du har brug "
"for at finde en specifik pakke, så besøg <ulink url=\"https://cdimage-search."
"debian.org/\">https://cdimage-search.debian.org/</ulink>."

#. Tag: para
#: install-methods.xml:37
#, fuzzy, no-c-format
#| msgid ""
#| "If your machine doesn't support booting from optical media<phrase arch="
#| "\"x86\"> (only relevant on very old PC systems)</phrase>, but you do have "
#| "a set of CD/DVD, you can use an alternative strategy such as <phrase arch="
#| "\"s390\">VM reader,</phrase> <phrase condition=\"bootable-disk\">hard "
#| "disk,</phrase> <phrase condition=\"bootable-usb\">usb stick,</phrase> "
#| "<phrase condition=\"supports-tftp\">net boot,</phrase> or manually "
#| "loading the kernel from the disc to initially boot the system installer. "
#| "The files you need for booting by another means are also on the disc; the "
#| "&debian; network archive and folder organization on the disc are "
#| "identical. So when archive file paths are given below for particular "
#| "files you need for booting, look for those files in the same directories "
#| "and subdirectories on your installation media."
msgid ""
"If your machine doesn't support booting from optical media<phrase arch="
"\"x86\"> (only relevant on very old PC systems)</phrase>, but you do have a "
"set of DVD, you can use an alternative strategy such as <phrase arch="
"\"s390\">VM reader,</phrase> <phrase condition=\"bootable-disk\">hard disk,</"
"phrase> <phrase condition=\"bootable-usb\">usb stick,</phrase> <phrase "
"condition=\"supports-tftp\">net boot,</phrase> or manually loading the "
"kernel from the disc to initially boot the system installer. The files you "
"need for booting by another means are also on the disc; the &debian; network "
"archive and folder organization on the disc are identical. So when archive "
"file paths are given below for particular files you need for booting, look "
"for those files in the same directories and subdirectories on your "
"installation media."
msgstr ""
"Hvis din maskine ikke understøtter opstart fra et optisk medie<phrase arch="
"\"x86\"> (kun relevant på meget gamle pc-systemer)</phrase>, men du har et "
"cd/dvd-sæt, så kan du bruge en alternativ strategi såsom <phrase arch="
"\"s390\">VM-læser,</phrase> <phrase condition=\"bootable-disk\">harddisk,</"
"phrase> <phrase condition=\"bootable-usb\">usb-drev,</phrase> <phrase "
"condition=\"supports-tftp\">net boot</phrase> eller manuelt indlæse kernen "
"fra disken for her i starten at få gang i systeminstallationsprogrammet. "
"Filerne du skal bruge til at starte op med andre metoder er også på disken; "
"&debian;-netværksarkivet og mappeorganisationen på disken er identisk. Så "
"når arkivfilstier angives nedenfor for bestemte filer du skal bruge til at "
"starte op, så skal du kigge efter disse filer i de samme mapper og "
"undermapper på dit installationsmedie."

#. Tag: para
#: install-methods.xml:58
#, no-c-format
msgid ""
"Once the installer is booted, it will be able to obtain all the other files "
"it needs from the disc."
msgstr ""
"Når installationsprogrammet er startet op, så vil det hente alle de andre "
"nødvendige filer fra disken."

#. Tag: para
#: install-methods.xml:63
#, no-c-format
msgid ""
"If you don't have an installation media set, then you will need to download "
"the installer system files and place them on the <phrase arch=\"s390\">VM "
"minidisk</phrase> <phrase condition=\"bootable-disk\">hard disk or</phrase> "
"<phrase condition=\"bootable-usb\">usb stick or</phrase> <phrase condition="
"\"supports-tftp\">a connected computer</phrase> so they can be used to boot "
"the installer."
msgstr ""
"Hvis du ikke har et installationsmediesæt, så skal du hente "
"installationsprogrammets systemfiler og placere dem på <phrase arch="
"\"s390\">VM-minidisk</phrase> <phrase condition=\"bootable-disk\">harddisk "
"eller</phrase> <phrase condition=\"bootable-usb\">usb-drev eller</phrase> "
"<phrase condition=\"supports-tftp\">en forbundet computer</phrase> så de kan "
"brugs til at starte installationsprogrammet op."

#. Tag: title
#: install-methods.xml:87
#, no-c-format
msgid "Downloading Files from &debian; Mirrors"
msgstr "Hentning af filer fra &debian;-spejl"

#. Tag: para
#: install-methods.xml:89
#, no-c-format
msgid ""
"To find the nearest (and thus probably the fastest) mirror, see the <ulink "
"url=\"&url-debian-mirrors;\">list of &debian; mirrors</ulink>."
msgstr ""
"For at finde det nærmeste (og dermed sandsynligvis det hurtigste) spejl, så "
"se <ulink url=\"&url-debian-mirrors;\">liste over &debian;-spejle</ulink>."

#. Tag: title
#: install-methods.xml:97
#, no-c-format
msgid "Where to Find Installation Files"
msgstr "Her kan du finde installationsfiler"

#. Tag: para
#: install-methods.xml:99
#, no-c-format
msgid ""
"Various installation files can be found on each &debian; mirror in the "
"directory <ulink url=\"&url-debian-installer;images\">debian/dists/"
"&releasename;/main/installer-&architecture;/current/images/</ulink> &mdash; "
"the <ulink url=\"&url-debian-installer;images/MANIFEST\">MANIFEST</ulink> "
"lists each image and its purpose."
msgstr ""
"Diverse installationsfiler kan findes på hvert &debian;-spejl i mappen "
"<ulink url=\"&url-debian-installer;images\">debian/dists/&releasename;/main/"
"installer-&architecture;/current/images/</ulink> &mdash; <ulink url=\"&url-"
"debian-installer;images/MANIFEST\">MANIFESTET</ulink> viser hvert aftryk og "
"dets formål."

#. Tag: title
#: install-methods.xml:111
#, no-c-format
msgid "Kurobox Pro Installation Files"
msgstr "Kurobox Pro-installationsfiler"

#. Tag: para
#: install-methods.xml:112
#, no-c-format
msgid ""
"The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the "
"disk on which you intend to install &debian;. These images can be obtained "
"from &kuroboxpro-firmware-img;."
msgstr ""
"Kurobox Pro kræver en kerne og ramdisk på en ext2-partition på disken du "
"forventer at installere &debian;. Disse aftryk kan indhentes fra &kuroboxpro-"
"firmware-img;."

#. Tag: title
#: install-methods.xml:122
#, no-c-format
msgid "HP mv2120 Installation Files"
msgstr "HP mv2120-installationsfiler"

#. Tag: para
#: install-methods.xml:123
#, no-c-format
msgid ""
"A firmware image is provided for the HP mv2120 which will automatically boot "
"<classname>debian-installer</classname>. This image can be installed with "
"uphpmvault on Linux and other systems and with the HP Media Vault Firmware "
"Recovery Utility on Windows. The firmware image can be obtained from &mv2120-"
"firmware-img;."
msgstr ""
"Et firmware-aftryk tilbydes for HP mv2120 som automatisk vil starte "
"<classname>Debians installationsprogram</classname> op. Dette aftryk kan "
"installeres med uphpmvault på Linux og andre systemer og med HP Media Vault "
"Firmware Recovery Utility på Windows. Firmware-aftrykket kan hentes fra "
"&mv2120-firmware-img;."

#. Tag: title
#: install-methods.xml:135
#, no-c-format
msgid "QNAP Turbo Station Installation Files"
msgstr "QNAP Turbo Station-installationsfiler"

#. Tag: para
#: install-methods.xml:136
#, no-c-format
msgid ""
"The installation files for the QNAP Turbo Station consist of a kernel and "
"ramdisk as well as a script to write these images to flash. You can obtain "
"the installation files for QNAP TS-11x/TS-12x, HS-210, TS-21x/TS-22x and "
"TS-41x/TS-42x models from &qnap-kirkwood-firmware-img;."
msgstr ""
"Installationsfilerne for QNAP Turbo Station består af en kerne og en ramdisk "
"samt et skript til at skrive disse aftryk til flash. Du kan hente "
"installationsfilerne for QNAP TS-11x/TS-12x, HS-210, TS-21x/TS-22x og TS-41x/"
"TS-42x fra &qnap-kirkwood-firmware-img;."

#. Tag: title
#: install-methods.xml:147
#, no-c-format
msgid "Plug Computer and OpenRD Installation Files"
msgstr "Plug Computer og OpenRD-installationsfiler"

#. Tag: para
#: install-methods.xml:148
#, no-c-format
msgid ""
"The installation files for plug computers (SheevaPlug, GuruPlug, DreamPlug "
"etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can "
"obtain these files from &kirkwood-marvell-firmware-img;."
msgstr ""
"Installationsfilerne for plug-computere (SheevaPlug, GuruPlug, DreamPlug "
"etc.) og OpenRD-enheder består af en kerne og initrd for U-Boot. Du kan "
"hente disse filer fra &kirkwood-marvell-firmware-img;."

#. Tag: title
#: install-methods.xml:158
#, no-c-format
msgid "LaCie NASes Installation Files"
msgstr "LaCie NASes-installationsfiler"

#. Tag: para
#: install-methods.xml:159
#, no-c-format
msgid ""
"The installation files for LaCie NASes (Network Space v2, Network Space Max "
"v2, Internet Space v2, d2 Network v2, 2Big Network v2 and 5Big Network v2) "
"consist of a kernel and initrd for U-Boot. You can obtain these files from "
"&lacie-kirkwood-firmware-img;."
msgstr ""
"Installationsfilerne for LaCie NASes (Network Space v2, Network Space Max "
"v2, Internet Space v2, d2 Network v2, 2Big Network v2 og 5Big Network v2) "
"består af en kerne og initrd for U-Boot. Du kan hente disse filer fra &lacie-"
"kirkwood-firmware-img;."

#. Tag: title
#: install-methods.xml:170
#, no-c-format
msgid "Armhf Multiplatform Installation Files"
msgstr "Armhf Multiplatform-installationsfiler"

#. Tag: para
#: install-methods.xml:171
#, no-c-format
msgid ""
"The installation files for systems supported by the armhf multiplatform "
"kernel (see <xref linkend=\"armhf-armmp-supported-platforms\"/>) consist of "
"a standard Linux kernel image, a standard Linux initial ramdisk image and a "
"system-specific device-tree blob. The kernel and the initial ramdisk image "
"for tftp-booting can be obtained from &armmp-firmware-img; and the device-"
"tree blob can be obtained from &armmp-dtb-img;. The tar archive for creating "
"a bootable USB stick with the installer can be obtained from &armmp-hd-media-"
"tarball;."
msgstr ""
"Installationsfilerne for systemer understøttet af armhf multiplatform-kernen "
"(se <xref linkend=\"armhf-armmp-supported-platforms\"/>) består af et "
"standardaftryk for Linuxkernen, et standardaftryk for Linux initial ramdisk "
"og en systemspecifik enhedstræ-blob. Kernen og initial ramdisk-aftrykket kan "
"hentes fra &armmp-firmware-img; og enhedstræ-blob'en kan hentes fra &armmp-"
"dtb-img;. Tar-arkivet til oprettelse af et USB-drev, der kan startes op fra, "
"med installationsprogrammet kan hentes fra &armmp-hd-media-tarball;."

#. Tag: para
#: install-methods.xml:183
#, no-c-format
msgid ""
"U-boot images for various armhf platforms are available at &armmp-uboot-img;."
msgstr ""
"U-boot-aftryk for diverse armhf-platforme er tilgængelige på &armmp-uboot-"
"img;."

#. Tag: title
#: install-methods.xml:229
#, no-c-format
msgid "Preparing Files for USB Memory Stick Booting"
msgstr "Forberedning af filer for opstart via USB-hukommelsesdrev"

#. Tag: para
#: install-methods.xml:231
#, no-c-format
msgid ""
"To prepare the USB stick, we recommend to use a system where GNU/Linux is "
"already running and where USB is supported. With current GNU/Linux systems "
"the USB stick should be automatically recognized when you insert it. If it "
"is not you should check that the usb-storage kernel module is loaded. When "
"the USB stick is inserted, it will be mapped to a device named <filename>/"
"dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. "
"You should be able to see to which device the USB stick was mapped by "
"running the command <command>lsblk</command> before and after inserting it. "
"(The output of <command>dmesg</command> (as root) is another possible method "
"for that.) To write to your stick, you may have to turn off its write "
"protection switch."
msgstr ""
"For at forberede USB-drevet, så skal du bruge et system hvor GNU/Linux "
"allerede er installeret og hvor USB er understøttet. Med nuværende GNU/Linux-"
"systemer vil USB-drevet automatisk blive genkendt, når det indsættes. Hvis "
"ikke bør du kontrollere om usb-storage-kernemodulet er indlæst. Når USB-"
"drevet indsættes, så vil det blive lagt på en enhed navngivet <filename>/dev/"
"sdX</filename>, hvor <quote>X</quote> er et bogstav i intervallet a-z. Du "
"bør kunne se hvilken enhed USB-drevet blev lagt på ved at køre kommandoen "
"<command>lsblk</command> før og efter indsættelse. (Resultatet af "
"<command>dmesg</command> (som root) er en anden mulig metode til dette). For "
"at skrive til dit drev skal du måske stille på skrivebeskyttelsesknappen."

#. Tag: para
#: install-methods.xml:246
#, no-c-format
msgid ""
"The procedures described in this section will destroy anything already on "
"the device! Make very sure that you use the correct device name for your USB "
"stick. If you use the wrong device the result could be that all information "
"on, for example, a hard disk is lost."
msgstr ""
"Procedurerne beskrevet i dette afsnit vil fjerne alt på enheden! Vær sikker "
"på, at du bruger det korrekte enhedsnavn for dit USB-drev. Hvis du bruger "
"den forkerte enhed kan resultatet være at hele informationen på for eksempel "
"en harddisk mistes."

#. Tag: title
#: install-methods.xml:256
#, no-c-format
msgid "Preparing a USB stick using a hybrid CD/DVD image"
msgstr "Forberedning af et USB-drev via et hybrid cd/dvd-aftryk"

#. Tag: para
#: install-methods.xml:257
#, fuzzy, no-c-format
#| msgid ""
#| "Debian installation images for this architecture are created using the "
#| "<command>isohybrid</command> technology; that means they can be written "
#| "directly to a USB stick, which is a very easy way to make an installation "
#| "media. Simply choose an image (such as the netinst, CD or DVD-1) that "
#| "will fit on your USB stick. See <xref linkend=\"official-cdrom\"/> to get "
#| "an installation image."
msgid ""
"Debian installation images for this architecture are created using the "
"<command>isohybrid</command> technology; that means they can be written "
"directly to a USB stick, which is a very easy way to make an installation "
"media. Simply choose an image (such as the netinst or DVD-1) that will fit "
"on your USB stick. See <xref linkend=\"official-cdrom\"/> to get an "
"installation image."
msgstr ""
"Debian installationsaftryk for denne arkitektur oprettes med "
"<command>isohybrid</command>-teknologien; dette betyder at de kan skrives "
"direkte på et USB-drev, hvilket er en meget nem måde at lave et "
"installationsmedie. Vælg et aftryk (såsom netinst, CD eller DVD-1), som vil "
"passe på dit USB-drev. Se <xref linkend=\"official-cdrom\"/> for hvordan du "
"får fat i et installationsaftryk."

#. Tag: para
#: install-methods.xml:267
#, fuzzy, no-c-format
#| msgid ""
#| "The installation image you choose should be written directly to the USB "
#| "stick, overwriting its current contents. For example, when using an "
#| "existing GNU/Linux system, the image file can be written to a USB stick "
#| "as follows, after having made sure that the stick is unmounted: "
#| "<informalexample><screen>\n"
#| "<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /"
#| "dev/<replaceable>sdX</replaceable></userinput>\n"
#| "<prompt>#</prompt> <userinput>sync</userinput>\n"
#| "</screen></informalexample> Information about how to do this on other "
#| "operating systems can be found in the <ulink url=\"&url-debian-cd-faq-"
#| "write-usb;\">Debian CD FAQ</ulink>."
msgid ""
"The installation image you choose should be written directly to the USB "
"stick, overwriting its current contents. For example, when using an existing "
"GNU/Linux system, the image file can be written to a USB stick as follows, "
"after having made sure that the stick is unmounted: "
"<informalexample><screen>\n"
"<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /dev/"
"<replaceable>sdX</replaceable></userinput>\n"
"<prompt>#</prompt> <userinput>sync</userinput>\n"
"</screen></informalexample> Simply writing the installation image to USB "
"like this should work fine for most users. For special needs there is this "
"<ulink url=\"https://wiki.debian.org/DebianInstaller/CreateUSBMedia\">wiki "
"page</ulink>."
msgstr ""
"Installationsaftrykket, du vælger, skal skrives direkte til USB-drevet, og "
"overskrive dets nuværende indhold. For eksempel kan du med et eksisterende "
"GNU/Linux-system skrive aftrykket til et USB-drev som i det følgende, efter "
"at du har sikret dig, at drevet er afmonteret:<informalexample><screen>\n"
"<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /dev/"
"<replaceable>sdX</replaceable></userinput>\n"
"<prompt>#</prompt> <userinput>sync</userinput>\n"
"</screen></informalexample> En simpel skrivning af installationsaftrykket "
"til USB bør fungere fint for de fleste brugere."

#. Tag: para
#: install-methods.xml:280
#, no-c-format
msgid ""
"Information about how to do this on other operating systems can be found in "
"the <ulink url=\"&url-debian-cd-faq-write-usb;\">Debian CD FAQ</ulink>."
msgstr ""
"Information om hvordan dette gøres på andre operativsystemer kan findes i "
"<ulink url=\"&url-debian-cd-faq-write-usb;\">Debians OSS for cd</ulink>."

#. Tag: para
#: install-methods.xml:285
#, no-c-format
msgid ""
"The image must be written to the whole-disk device and not a partition, e."
"g. /dev/sdb and not /dev/sdb1. Do not use tools like <command>unetbootin</"
"command> which alter the image."
msgstr ""
"Aftrykket skal skrives til whole-disk-enheden og ikke en partition, f.eks. /"
"dev/sdb og ikke /dev/sdb1. Brug ikke værktøjer såsom <command>unetbootin</"
"command> som ændrer aftrykket."

#. Tag: title
#: install-methods.xml:302
#, no-c-format
msgid "Preparing Files for Hard Disk Booting"
msgstr "Forberedelse af filer for harddiskopstart"

#. Tag: para
#: install-methods.xml:303
#, no-c-format
msgid ""
"The installer may be booted using boot files placed on an existing hard "
"drive partition, either launched from another operating system or by "
"invoking a boot loader directly from the BIOS. On modern UEFI systems, the "
"kernel may be booted directly from the UEFI partition without the need of a "
"boot loader."
msgstr ""
"Installationsprogrammet kan startes ved at bruges opstartsfiler placeret på "
"en eksisterende harddiskpartition, enten startet fra et andet operativsystem "
"eller ved at igangsætte en opstartsindlæser direkte fra BIOS'en. På moderne "
"UEFI-systemer kan kernen måske startes direkte fra UEFI-partitionen uden "
"behov for en opstartsindlæser."

#. Tag: para
#: install-methods.xml:311
#, no-c-format
msgid ""
"A full, <quote>pure network</quote> installation can be achieved using this "
"technique. This avoids all hassles of removable media, like finding and "
"burning CD/DVD images."
msgstr ""
"En fuld, <quote>ren netværksinstallation</quote> kan opnås via denne teknik. "
"Dette undgår alle problemerne forbundet med eksterne medier, såsom af finde "
"og brænde cd/dvd-aftryk."

#. Tag: title
#: install-methods.xml:341
#, no-c-format
msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
msgstr ""
"Harddiskinstallationsprogrammet med opstart fra Linux via <command>GRUB</"
"command>"

#. Tag: para
#: install-methods.xml:343
#, no-c-format
msgid ""
"This section explains how to add to or even replace an existing linux "
"installation using <command>GRUB</command>."
msgstr ""
"Dette afsnit forklarer hvordan du tilføjer eller erstatter en eksisterende "
"Linux-installation via <command>GRUB</command>."

#. Tag: para
#: install-methods.xml:349
#, no-c-format
msgid ""
"At boot time, <command>GRUB</command> supports loading in memory not only "
"the kernel, but also a disk image. This RAM disk can be used as the root "
"file-system by the kernel."
msgstr ""
"Ved opstart, understøtter <command>GRUB</command> indlæsning i hukommelse "
"ikke kun af kernen, men også af et diskaftryk. Denne RAM-disk kan bruges som "
"rodfilsystem af kernen."

#. Tag: para
#: install-methods.xml:355
#, no-c-format
msgid ""
"Copy the following files from the &debian; archives to a convenient location "
"on your hard drive, for instance to <filename>/boot/newinstall/</filename>."
msgstr ""
"Kopier de følgende filer fra &debian;-arkiverne til en passende placering på "
"din harddisk, for eksempel <filename>/boot/newinstall/</filename>."

#. Tag: para
#: install-methods.xml:362
#, no-c-format
msgid "<filename>vmlinuz</filename> (kernel binary)"
msgstr "<filename>vmlinuz</filename> (kernens binære fil)"

#. Tag: para
#: install-methods.xml:367
#, no-c-format
msgid "<filename>initrd.gz</filename> (ramdisk image)"
msgstr "<filename>initrd.gz</filename> (ramdisk-aftryk)"

#. Tag: para
#: install-methods.xml:374
#, no-c-format
msgid ""
"If you intend to use the hard drive only for booting and then download "
"everything over the network, you should download the &x86-netboot-initrd; "
"file and its corresponding kernel &x86-netboot-linux;. This will allow you "
"to repartition the hard disk from which you boot the installer, although you "
"should do so with care."
msgstr ""
"Hvis du har tænkt dig kun at bruge harddisken for opstart og så hente alt "
"over netværket, så skal du hente filen &x86-netboot-initrd; og dens "
"modsvarende kerne, &x86-netboot-linux;. Dette vil give dig mulighed for at "
"partitionere harddisken, du starter installationsprogrammet op fra, om "
"selvom du bør gøre dette med forsigtighed."

#. Tag: para
#: install-methods.xml:383
#, no-c-format
msgid ""
"Alternatively, if you intend to keep an existing partition on the hard drive "
"unchanged during the install, you can download the &x86-hdmedia-initrd; file "
"and its kernel &x86-hdmedia-vmlinuz;, as well as copy an installation image "
"to the hard drive (make sure the file is named ending in <literal>.iso</"
"literal>). The installer can then boot from the hard drive and install from "
"the installation image, without needing the network."
msgstr ""
"Alternativt, hvis du forventer at bevare en eksisterende partition på "
"harddisken uændret under installationen, så kan du hente filen &x86-hdmedia-"
"initrd; og dens kerne, samt kopiere et installationsaftryk til drevet (sikr "
"dig at filens navn ender med <literal>.iso</literal>). "
"Installationsprogrammet kan så starte op fra drevet og installere fra "
"installationsaftrykket, uden at kræve netværket."

#. Tag: para
#: install-methods.xml:391
#, no-c-format
msgid ""
"Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
"\"/>."
msgstr ""
"Endelig, for at konfigure opstartsindllæseren fortsættes til <xref linkend="
"\"boot-initrd\"/>."

#. Tag: title
#: install-methods.xml:406
#, no-c-format
msgid "Preparing Files for TFTP Net Booting"
msgstr "Forberedelse af filer for TFTP-netopstart"

#. Tag: para
#: install-methods.xml:407
#, no-c-format
msgid ""
"If your machine is connected to a local area network, you may be able to "
"boot it over the network from another machine, using TFTP. If you intend to "
"boot the installation system from another machine, the boot files will need "
"to be placed in specific locations on that machine, and the machine "
"configured to support booting of your specific machine."
msgstr ""
"Hvis din maskine er forbundet på et lokalt områdenetværk, så kan du måske "
"starte den op over netværket fra en anden maskine, via TFTP. Hvis du har "
"tænkt dig at starte installationssystemet op fra en anden maskine, så vil "
"opstartsfilerne skulle placeres på specifikke placeringer på den maskine, og "
"maskinen skal konfigureres til at understøtte opstart fra din specfikke "
"maskine."

#. Tag: para
#: install-methods.xml:415
#, no-c-format
msgid ""
"You need to set up a TFTP server, and for many machines a DHCP server<phrase "
"condition=\"supports-rarp\">, or RARP server</phrase><phrase condition="
"\"supports-bootp\">, or BOOTP server</phrase>."
msgstr ""
"Du skal opsætte en TFTP-server, og for mange maskiner en DHCP-server<phrase "
"condition=\"supports-rarp\">, eller RARP-server</phrase><phrase condition="
"\"supports-bootp\">, eller BOOTP-server</phrase>."

#. Tag: para
#: install-methods.xml:422
#, no-c-format
msgid ""
"<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
"(RARP) is one way to tell your client what IP address to use for itself. "
"Another way is to use the BOOTP protocol.</phrase> <phrase condition="
"\"supports-bootp\">BOOTP is an IP protocol that informs a computer of its IP "
"address and where on the network to obtain a boot image.</phrase> The DHCP "
"(Dynamic Host Configuration Protocol) is a more flexible, backwards-"
"compatible extension of BOOTP. Some systems can only be configured via DHCP."
msgstr ""
"<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
"(RARP) er en måde at fortælle din klient, hvilken IP-adresse der skal bruges "
"internt. En anden måde er at bruge BOOTP-protokollen.</phrase> <phrase "
"condition=\"supports-bootp\">BOOTP er en IP-protokol, som informerer en "
"computer om dens IP-adresse og hvor på netværket du kan finde et "
"opstartsaftryk.</phrase> DHcP'en (Dynamic Host Configuration Protocol) er en "
"mere fleksibel, bagud kompatibel udvidelse af BOOTP. Nogle systemer kan kun "
"konfigureres via DHCP."

#. Tag: para
#: install-methods.xml:448
#, no-c-format
msgid ""
"The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
"the client. Theoretically, any server, on any platform, which implements "
"these protocols, may be used. In the examples in this section, we shall "
"provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux."
msgstr ""
"Trivial File Transfer Protocol (TFTP) bruges til at levere opstartsaftrykket "
"til klienten. Teoretisk kan enhver server på enhver platform, som "
"implementerer disse protokoller, anvendes. I eksemplerne i dette afsnit "
"angiver vi kommandoer for SunOS 4.x, SunOS 5.x (a.k.a. Solaris) og GNU/Linux."

#. Tag: para
#: install-methods.xml:456
#, no-c-format
msgid ""
"For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
"It's written by the same author as the <classname>syslinux</classname> "
"bootloader and is therefore least likely to cause issues. A good alternative "
"is <classname>atftpd</classname>."
msgstr ""
"For en &debian-gnu;-server anbefaler vi <classname>tftpd-hpa</classname>. "
"Den er skrevet af den samme forfatter som opstartsindlæseren "
"<classname>syslinux</classname> og er derfor den mindst sandsynlige årsag "
"til problemstillinger. Et godt alternativ er <classname>atftpd</classname>."

#. Tag: title
#: install-methods.xml:472
#, no-c-format
msgid "Setting up RARP server"
msgstr "Opsætning af en RARP-server"

#. Tag: para
#: install-methods.xml:473
#, no-c-format
msgid ""
"To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
"address) of the client computers to be installed. If you don't know this "
"information, you can boot into <quote>Rescue</quote> mode and use the "
"command <userinput>ip addr show dev eth0</userinput>."
msgstr ""
"For at opsætte RARP, så skal ud kende Ethernet-adressen (a.k.a. MAC-"
"adressen) på klientcomputerne der skal installeres på. Hvis du ikke kender "
"denne information, så kan du starte op i <quote>Redningstilstand</quote> og "
"bruge kommandoen <userinput>ip addr show dev eth0</userinput>."

#. Tag: para
#: install-methods.xml:482
#, no-c-format
msgid ""
"On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
"<command>rarpd</command> program. You need to ensure that the Ethernet "
"hardware address for the client is listed in the <quote>ethers</quote> "
"database (either in the <filename>/etc/ethers</filename> file, or via NIS/NIS"
"+) and in the <quote>hosts</quote> database. Then you need to start the RARP "
"daemon. Issue the command (as root): <userinput>/usr/sbin/rarpd -a</"
"userinput> on most Linux systems and SunOS 5 (Solaris 2), <userinput>/usr/"
"sbin/in.rarpd -a</userinput> on some other Linux systems, or <userinput>/usr/"
"etc/rarpd -a</userinput> in SunOS 4 (Solaris 1)."
msgstr ""
"På et RARP-serversystem der bruger Linux-kernen eller Solaris/SunOS, skal du "
"bruge programmet <command>rarpd</command>. Du skal sikre dig, at "
"Ethernettets udstyrsadresse for klienten vises i databasen <quote>ethers</"
"quote> (enten i filen <filename>/etc/ethers</filename>, eller via NIS/NIS+) "
"og i databasen <quote>hosts</quote>. Så skal du starte RARP-dæmonen. Udsted "
"kommandoen (som root): <userinput>/usr/sbin/rarpd -a</userinput> på de "
"fleste Linux-systemer og SunOS 5 (Solaris 2), <userinput>/usr/sbin/in.rarpd -"
"a</userinput> på nogle andre Linux-systemer, eller <userinput>/usr/etc/rarpd "
"-a</userinput> i SunOS 4 (Solaris 1)."

#. Tag: title
#: install-methods.xml:503
#, no-c-format
msgid "Setting up a DHCP server"
msgstr "Opsætning af en DHCP-server"

#. Tag: para
#: install-methods.xml:504
#, no-c-format
msgid ""
"One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
"gnu;, the <classname>isc-dhcp-server</classname> package is recommended. "
"Here is a sample configuration file for it (see <filename>/etc/dhcp/dhcpd."
"conf</filename>):"
msgstr ""
"En fri DHCP-server er ISC <command>dhcpd</command>. For &debian-gnu; "
"anbefales pakken <classname>isc-dhcp-server</classname>. Her er et eksempel "
"på en konfigurationsfil for den (se <filename>/etc/dhcp/dhcpd.conf</"
"filename>):"

#. Tag: screen
#: install-methods.xml:511
#, no-c-format
msgid ""
"option domain-name \"example.com\";\n"
"option domain-name-servers ns1.example.com;\n"
"option subnet-mask 255.255.255.0;\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"server-name \"servername\";\n"
"\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option routers 192.168.1.1;\n"
"}\n"
"\n"
"host clientname {\n"
"  filename \"/tftpboot.img\";\n"
"  server-name \"servername\";\n"
"  next-server servername;\n"
"  hardware ethernet 01:23:45:67:89:AB;\n"
"  fixed-address 192.168.1.90;\n"
"}"
msgstr ""
"option domain-name \"example.com\";\n"
"option domain-name-servers ns1.example.com;\n"
"option subnet-mask 255.255.255.0;\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"server-name \"servername\";\n"
"\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option routers 192.168.1.1;\n"
"}\n"
"\n"
"host clientname {\n"
"  filename \"/tftpboot.img\";\n"
"  server-name \"servername\";\n"
"  next-server servername;\n"
"  hardware ethernet 01:23:45:67:89:AB;\n"
"  fixed-address 192.168.1.90;\n"
"}"

#. Tag: para
#: install-methods.xml:513
#, no-c-format
msgid ""
"In this example, there is one server <replaceable>servername</replaceable> "
"which performs all of the work of DHCP server, TFTP server, and network "
"gateway. You will almost certainly need to change the domain-name options, "
"as well as the server name and client hardware address. The "
"<replaceable>filename</replaceable> option should be the name of the file "
"which will be retrieved via TFTP."
msgstr ""
"I dette eksempel er der en server <replaceable>servername</replaceable> som "
"udfører al arbejdet på DHCP-serveren, TFTP-serveren og "
"netværksadgangspunktet. Du har med stor sandsynlighed behov for at ændre "
"indstillinger for domænenavnet samt servernavnet og klientens "
"udstyrsadresse. Indstillingen <replaceable>filename</replaceable> skal være "
"navnet på filen, som hentes via TFTP."

#. Tag: para
#: install-methods.xml:523
#, no-c-format
msgid ""
"After you have edited the <command>dhcpd</command> configuration file, "
"restart it with <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
msgstr ""
"Efter du har redigeret konfigurationsfilen <command>dhcpd</command>, så "
"genstart den med <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."

#. Tag: title
#: install-methods.xml:531
#, no-c-format
msgid "Enabling PXE Booting in the DHCP configuration"
msgstr "Aktivering af PXE-opstart i DHCP-konfigurationen"

#. Tag: para
#: install-methods.xml:532
#, no-c-format
msgid ""
"Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
"boot Execution Environment (PXE) method of TFTP. <informalexample><screen>\n"
"option domain-name \"example.com\";\n"
"\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"\n"
"allow booting;\n"
"allow bootp;\n"
"\n"
"# The next paragraph needs to be modified to fit your case\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option broadcast-address 192.168.1.255;\n"
"# the gateway address which can be different\n"
"# (access to the internet for instance)\n"
"  option routers 192.168.1.1;\n"
"# indicate the dns you want to use\n"
"  option domain-name-servers 192.168.1.3;\n"
"}\n"
"\n"
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"pxelinux.0\";\n"
" }\n"
"}\n"
"</screen></informalexample> Note that for PXE booting, the client filename "
"<filename>pxelinux.0</filename> is a boot loader, not a kernel image (see "
"<xref linkend=\"tftp-images\"/> below)."
msgstr ""
"Her er et andet eksempel for <filename>dhcp.conf</filename>, der rbuger Pre-"
"boot Execution Environment (PXE)-metoden for TFTP. "
"<informalexample><screen>\n"
"option domain-name \"example.com\";\n"
"\n"
"default-lease-time 600;\n"
"max-lease-time 7200;\n"
"\n"
"allow booting;\n"
"allow bootp;\n"
"\n"
"# The next paragraph needs to be modified to fit your case\n"
"subnet 192.168.1.0 netmask 255.255.255.0 {\n"
"  range 192.168.1.200 192.168.1.253;\n"
"  option broadcast-address 192.168.1.255;\n"
"# the gateway address which can be different\n"
"# (access to the internet for instance)\n"
"  option routers 192.168.1.1;\n"
"# indicate the dns you want to use\n"
"  option domain-name-servers 192.168.1.3;\n"
"}\n"
"\n"
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"pxelinux.0\";\n"
" }\n"
"}\n"
"</screen></informalexample> Bemærk at for PXE-opstart, er klientfilnavnet "
"<filename>pxelinux.0</filename> en opstartsindlæser, ikke et kerneaftryk (se "
"<xref linkend=\"tftp-images\"/> below)."

#. Tag: para
#: install-methods.xml:542
#, no-c-format
msgid ""
"If your machine uses UEFI to boot, you will have to specify a boot loader "
"appropriate for UEFI machines, for example"
msgstr ""
"Hvis din maskine bruger UEFI til opstart, så skal du angive en "
"opstartsindlæser passende for UEFI-maskiner, for eksempel"

#. Tag: screen
#: install-methods.xml:546
#, no-c-format
msgid ""
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"debian-installer/amd64/bootnetx64.efi\";\n"
" }\n"
"}"
msgstr ""
"group {\n"
"  next-server 192.168.1.3;\n"
"  host tftpclient {\n"
"# tftp client hardware address\n"
"  hardware ethernet  00:10:DC:27:6C:15;\n"
"  filename \"debian-installer/amd64/bootnetx64.efi\";\n"
" }\n"
"}"

#. Tag: title
#: install-methods.xml:559
#, no-c-format
msgid "Setting up a BOOTP server"
msgstr "Opsætning af en BOOTP-server"

#. Tag: para
#: install-methods.xml:560
#, no-c-format
msgid ""
"There are two BOOTP servers available for GNU/Linux. The first is CMU "
"<command>bootpd</command>. The other is actually a DHCP server: ISC "
"<command>dhcpd</command>. In &debian-gnu; these are contained in the "
"<classname>bootp</classname> and <classname>isc-dhcp-server</classname> "
"packages respectively."
msgstr ""
"Der er to BOOTP-servere tilgængelige for GNU/Linux. Den første er CMU "
"<command>bootpd</command>. Den anden er faktisk en DHCP-server: ISC "
"<command>dhcpd</command>. I &debian-gnu; er disse indeholdt i pakkerne "
"<classname>bootp</classname> og <classname>isc-dhcp-server</classname> "
"respektivt."

#. Tag: para
#: install-methods.xml:568
#, no-c-format
msgid ""
"To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
"relevant line in <filename>/etc/inetd.conf</filename>. On &debian-gnu;, you "
"can run <userinput>update-inetd --enable bootps</userinput>, then "
"<userinput>/etc/init.d/inetd reload</userinput> to do so. Just in case your "
"BOOTP server does not run &debian;, the line in question should look like: "
"<informalexample><screen>\n"
"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
"</screen></informalexample> Now, you must create an <filename>/etc/bootptab</"
"filename> file. This has the same sort of familiar and cryptic format as the "
"good old BSD <filename>printcap</filename>, <filename>termcap</filename>, "
"and <filename>disktab</filename> files. See the <filename>bootptab</"
"filename> manual page for more information. For CMU <command>bootpd</"
"command>, you will need to know the hardware (MAC) address of the client. "
"Here is an example <filename>/etc/bootptab</filename>: "
"<informalexample><screen>\n"
"client:\\\n"
"  hd=/tftpboot:\\\n"
"  bf=tftpboot.img:\\\n"
"  ip=192.168.1.90:\\\n"
"  sm=255.255.255.0:\\\n"
"  sa=192.168.1.1:\\\n"
"  ha=0123456789AB:\n"
"</screen></informalexample> You will need to change at least the <quote>ha</"
"quote> option, which specifies the hardware address of the client. The "
"<quote>bf</quote> option specifies the file a client should retrieve via "
"TFTP; see <xref linkend=\"tftp-images\"/> for more details."
msgstr ""
"For at bruge CMU <command>bootpd</command>, skal du først aktivere (eller "
"tilføje) de relevante linjer i <filename>/etc/inetd.conf</filename>. På "
"&debian-gnu; kan du køre <userinput>update-inetd --enable bootps</"
"userinput>, og så <userinput>/etc/init.d/inetd reload</userinput> for at "
"gøre det. Bare i tilfælde af, at din BOOTP-server ikke kører &debian;, skal "
"den omtalte linje se således ud:<informalexample><screen>\n"
"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
"</screen></informalexample> Nu skal du oprette en <filename>/etc/bootptab</"
"filename>-fil. Den har samme slags kendte og kryptiske format som det gode "
"gamle BSD <filename>printcap</filename>-, <filename>termcap</filename>-, og "
"<filename>disktab</filename>-filer. Se manualsiden <filename>bootptab</"
"filename> for yderligere information. For CMU <command>bootpd</command>, "
"skal du bruge udstyrsadressen (MAC) for klienten. Her er en eksempel "
"<filename>/etc/bootptab</filename>: <informalexample><screen>\n"
"client:\\\n"
"  hd=/tftpboot:\\\n"
"  bf=tftpboot.img:\\\n"
"  ip=192.168.1.90:\\\n"
"  sm=255.255.255.0:\\\n"
"  sa=192.168.1.1:\\\n"
"  ha=0123456789AB:\n"
"</screen></informalexample> Du skal mindst ændre <quote>ha</quote>-"
"tilvalget, som angiver udstyrsadressen for klienten. Tilvalget <quote>bf</"
"quote> specificerer filen en klient skal hente via TFTP; se <xref linkend="
"\"tftp-images\"/> for yderligere detaljer."

#. Tag: para
#: install-methods.xml:595
#, no-c-format
msgid ""
"By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
"easy, because it treats BOOTP clients as a moderately special case of DHCP "
"clients. Some architectures require a complex configuration for booting "
"clients via BOOTP. If yours is one of those, read the section <xref linkend="
"\"dhcpd\"/>. Otherwise you will probably be able to get away with simply "
"adding the <userinput>allow bootp</userinput> directive to the configuration "
"block for the subnet containing the client in <filename>/etc/dhcp/dhcpd."
"conf</filename>, and restart <command>dhcpd</command> with <userinput>/etc/"
"init.d/isc-dhcp-server restart</userinput>."
msgstr ""
"Som kontrast er opsætning af BOOTP med ISC <command>dhcpd</command> virkelig "
"nemt, da det opfatter BOOTP-klienter som et moderat specieltilfælde for DHCP-"
"klienter. Nogle arkitekturer kræver en kompleks konfiguration for opstart af "
"klienter via BOOTP. Hvis din er en af disse, så læs afsnittet <xref linkend="
"\"dhcpd\"/>. Ellers vil du sandsynligvis kunne slippe af sted med at tilføje "
"<userinput>allow bootp</userinput> direkte til konfigurationsblokken for "
"undernettet, der indeholder klienten i <filename>/etc/dhcp/dhcpd.conf</"
"filename>, og genstarte <command>dhcpd</command> med <userinput>/etc/init.d/"
"isc-dhcp-server restart</userinput>."

#. Tag: title
#: install-methods.xml:614
#, no-c-format
msgid "Enabling the TFTP Server"
msgstr "Aktivering af TFTP-serveren"

#. Tag: para
#: install-methods.xml:615
#, no-c-format
msgid ""
"To get the TFTP server ready to go, you should first make sure that "
"<command>tftpd</command> is enabled."
msgstr ""
"For at få TFTP-serveren klar, skal du først sikre dig, at <command>tftpd</"
"command> er aktiveret."

#. Tag: para
#: install-methods.xml:620
#, no-c-format
msgid ""
"In the case of <classname>tftpd-hpa</classname> there are two ways the "
"service can be run. It can be started on demand by the system's "
"<classname>inetd</classname> daemon, or it can be set up to run as an "
"independent daemon. Which of these methods is used is selected when the "
"package is installed and can be changed by reconfiguring the package."
msgstr ""
"I tilfældet <classname>tftpd-hpa</classname> er der to måder at tjenesten "
"kan køres. Den kan startes efter behov af systemets dæmon <classname>inetd</"
"classname>, eller den kan opsættes til at blive kørt som en uafhængig dæmon. "
"Hvilken af disse metoder der bruges vælges når pakke installeres og kan "
"ændres ved at rekonfigurere pakken."

#. Tag: para
#: install-methods.xml:629
#, no-c-format
msgid ""
"Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
"to serve images from. However, &debian-gnu; packages may use other "
"directories to comply with the <ulink url=\"&url-fhs-home;\">Filesystem "
"Hierarchy Standard</ulink>. For example, <classname>tftpd-hpa</classname> by "
"default uses <filename>/srv/tftp</filename>. You may have to adjust the "
"configuration examples in this section accordingly."
msgstr ""
"Historisk brugte TFTP-servere <filename>/tftpboot</filename> som mappe til "
"at betjene aftryk fra. Pakkerne &debian-gnu; kan bruge andre mapper til at "
"overholde <ulink url=\"&url-fhs-home;\">Filesystem Hierarchy Standard</"
"ulink>. For eksempel bruger <classname>tftpd-hpa</classname> som standard "
"<filename>/srv/tftp</filename>. Du skal måske justere "
"konfigurationseksemplerne i dette afsnit jævnfør dette."

#. Tag: para
#: install-methods.xml:639
#, no-c-format
msgid ""
"All <command>in.tftpd</command> alternatives available in &debian; should "
"log TFTP requests to the system logs by default. Some of them support a "
"<userinput>-v</userinput> argument to increase verbosity. It is recommended "
"to check these log messages in case of boot problems as they are a good "
"starting point for diagnosing the cause of errors."
msgstr ""
"Alle <command>in.tftpd</command> alternativer tilgængelige i &debian; bør "
"logge TFTP-forespørgsler til systemets logge som standard. Nogle af dem "
"understøtter et <userinput>-v</userinput> argument for at øge uddybningen. "
"Det anbefales at kontrollere disse logbeskeder i tilfælde at "
"opstartsproblemer, da de er et godt udgangspunkt for diagnosticering af "
"fejltilfælde."

#. Tag: title
#: install-methods.xml:651
#, no-c-format
msgid "Move TFTP Images Into Place"
msgstr "Flyt TFTP-aftryk på plads"

#. Tag: para
#: install-methods.xml:652
#, no-c-format
msgid ""
"Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
"files\"/>, in the <command>tftpd</command> boot image directory. You may "
"have to make a link from that file to the file which <command>tftpd</"
"command> will use for booting a particular client. Unfortunately, the file "
"name is determined by the TFTP client, and there are no strong standards."
msgstr ""
"Placer så TFTP-opstartsaftrykket du skal bruge som set i <xref linkend="
"\"where-files\"/>, i opstartsaftryksmappen <command>tftpd</command>. Du skal "
"måske lave en henvisning fra den fil til filen som <command>tftpd</command> "
"vil bruge til opstart af en bestemt klient. Desværre bestemmes filnavnet af "
"TFTP-klienten, og der er ingen udbredte standarder."

#. Tag: para
#: install-methods.xml:703
#, no-c-format
msgid ""
"For PXE booting, everything you should need is set up in the "
"<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
"tarball into the <command>tftpd</command> boot image directory. Make sure "
"your dhcp server is configured to pass <filename>pxelinux.0</filename> to "
"<command>tftpd</command> as the filename to boot. For UEFI machines, you "
"will need to pass an appropriate EFI boot image name (such as <filename>/"
"debian-installer/amd64/bootnetx64.efi</filename>)."
msgstr ""
"For PXE-opstart befinder alt du bør sætte op sig i tarball'en "
"<filename>netboot/netboot.tar.gz</filename>. Udpak denne tarbal i mappen for "
"opstartsaftrykket <command>tftpd</command>. Sikr dig at din dhcp-server er "
"konfigureret til at sende <filename>pxelinux.0</filename> til "
"<command>tftpd</command> som filnavnet at starte op. For UEFI-maskiner skal "
"du sende et passende EFI-opstartsaftryksnavn (såsom <filename>/debian-"
"installer/amd64/bootnetx64.efi</filename>)."

#. Tag: title
#: install-methods.xml:722
#, no-c-format
msgid "Automatic Installation"
msgstr "Automatisk installation"

#. Tag: para
#: install-methods.xml:723
#, fuzzy, no-c-format
#| msgid ""
#| "For installing on multiple computers it's possible to do fully automatic "
#| "installations. &debian; packages intended for this include <classname>fai-"
#| "quickstart</classname> (which can use an install server) and the &debian; "
#| "Installer itself. Have a look at the <ulink url=\"http://fai-project.org"
#| "\">FAI home page</ulink> for detailed information."
msgid ""
"For installing on multiple computers it's possible to do fully automatic "
"installations. &debian; packages intended for this include <classname>fai-"
"quickstart</classname>, which can use an install server (have a look at the "
"<ulink url=\"http://fai-project.org\">FAI home page</ulink> for detailed "
"information) and the &debian; Installer itself."
msgstr ""
"For installation på flere computere er det muligt at udføre helt automatiske "
"installationer. &debian;-pakker til dette formål inkluderer <classname>fai-"
"quickstart</classname> (som kan bruge en installationsserver) og selve "
"&debian;-installationsprogrammet. Kig på <ulink url=\"http://fai-project.org"
"\">FAI's hjemmeside</ulink> for detaljeret information."

#. Tag: title
#: install-methods.xml:735
#, no-c-format
msgid "Automatic Installation Using the &debian; Installer"
msgstr "Automatisk installation med &debian;-installationsprogrammet"

#. Tag: para
#: install-methods.xml:736
#, no-c-format
msgid ""
"The &debian; Installer supports automating installs via preconfiguration "
"files. A preconfiguration file can be loaded from the network or from "
"removable media, and used to fill in answers to questions asked during the "
"installation process."
msgstr ""
"&debian;-installationsprogrammet understøtter automatiske installationer via "
"prækonfigurationsfiler. En prækonfigurationsfil kan indlæses fra netværket "
"eller fra et eksternt medie, og bruges til at udfylde svar på spørgsmål "
"stillet under installationsprocessen."

#. Tag: para
#: install-methods.xml:743
#, no-c-format
msgid ""
"Full documentation on preseeding including a working example that you can "
"edit is in <xref linkend=\"appendix-preseed\"/>."
msgstr ""
"Fuld dokumentation vedrørende preseeding inklusiv et arbejdseksempel, som du "
"kan redigere er i <xref linkend=\"appendix-preseed\"/>."

#. Tag: title
#: install-methods.xml:757
#, no-c-format
msgid "Verifying the integrity of installation files"
msgstr "Verifikation af integreiteten for installationsfiler"

#. Tag: para
#: install-methods.xml:759
#, no-c-format
msgid ""
"You can verify the integrity of downloaded files against checksums provided "
"in <filename>SHA256SUMS</filename> or <filename>SHA512SUMS</filename> files "
"on Debian mirrors. You can find them in the same places as the installation "
"images itself. Visit the following locations:"
msgstr ""
"Du kan verificere integriteten for hentede filer mod kontrolsummer vist i "
"filerne <filename>SHA256SUMS</filename> eller <filename>SHA512SUMS</"
"filename> på Debianspejle. Du kan finde dem på samme sted som selve "
"installationsaftrykkene. Besøg de følgende steder:"

#. Tag: para
#: install-methods.xml:770
#, no-c-format
msgid ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"cd/\">checksum files for CD images</ulink>,"
msgstr ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"cd/\">kontrolsumfiler for cd-aftryk</ulink>,"

#. Tag: para
#: install-methods.xml:776
#, no-c-format
msgid ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"dvd/\">checksum files for DVD images</ulink>,"
msgstr ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"dvd/\">kontrolsumfiler for dvd-aftryk</ulink>,"

#. Tag: para
#: install-methods.xml:782
#, no-c-format
msgid ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"bd/\">checksum files for BD images</ulink>,"
msgstr ""
"<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
"bd/\">kontrolsumfiler for BD-aftryk</ulink>,"

#. Tag: para
#: install-methods.xml:788
#, no-c-format
msgid ""
"<ulink url=\"http://&archive-mirror;/debian/dists/&releasename;/main/"
"installer-&architecture;/current/images/\">checksum files for other "
"installation files</ulink>."
msgstr ""
"<ulink url=\"http://&archive-mirror;/debian/dists/&releasename;/main/"
"installer-&architecture;/current/images/\">kontrolsumfiler for andre "
"installationsfiler</ulink>."

#. Tag: para
#: install-methods.xml:796
#, no-c-format
msgid ""
"To compute the checksum of a downloaded installation file, use "
"<informalexample><screen>\n"
"sha256sum filename.iso\n"
"</screen></informalexample> respective <informalexample><screen>\n"
"sha512sum filename.iso\n"
"</screen></informalexample> and then compare the shown checksum against the "
"corresponding one in the <filename>SHA256SUMS</filename> respective "
"<filename>SHA512SUMS</filename> file."
msgstr ""
"For at beregne kontrolsummen for et hentet installationsmedie, brug "
"<informalexample><screen>\n"
"sha256sum filename.iso\n"
"</screen></informalexample> respektiv <informalexample><screen>\n"
"sha512sum filename.iso\n"
"</screen></informalexample> og sammenlign så den viste kontrolsum mod den "
"tilsvarende i <filename>SHA256SUMS</filename>-filen respektiv "
"<filename>SHA512SUMS</filename>-filen."

#. Tag: para
#: install-methods.xml:809
#, no-c-format
msgid ""
"The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
"\"https://www.debian.org/CD/faq/index.en.html#verify\">more useful "
"information</ulink> on this topic (such as the script "
"<filename>check_debian_iso</filename>, to semi-automate above procedure), as "
"well as instructions, how to verify the integrity of the above checksum "
"files themselves."
msgstr ""
"<ulink url=\"&url-debian-cd-faq;\">Debians OSS for cd</ulink> har <ulink url="
"\"https://www.debian.org/CD/faq/index.en.html#verify\">mere nyttig "
"information</ulink> om dette emne (såsom skriptet "
"<filename>check_debian_iso</filename>, til en semiautomatiseirng af "
"ovenstående procedure), samt instruktioner om hvordan integriteten for de "
"ovenstående kontrolsummer verificeres."

#, no-c-format
#~ msgid ""
#~ "As CDs have a rather limited capacity by today's standards, not all "
#~ "graphical desktop environments are installable with only the first CD; "
#~ "for some desktop environments a CD installation requires either network "
#~ "connectivity during the installation to download the remaining files or "
#~ "additional CDs."
#~ msgstr ""
#~ "Da cd'er har en ret så begrænset kapacitet efter nutidens standarder, kan "
#~ "ikke alle grafiske skrivebordsmiljøet installeres kun med den første cd; "
#~ "for nogle skrivebordsmiljøet kræver en cd-installation enten "
#~ "netværksforbindelse under installationen for at hente de resternede filer "
#~ "eller yderligere cd'er."

#~ msgid ""
#~ "Alternatively, for very small USB sticks, only a few megabytes in size, "
#~ "you can download the &netboot-mini-iso; image from the <filename>netboot</"
#~ "filename> directory (at the location mentioned in <xref linkend=\"where-"
#~ "files\"/>)."
#~ msgstr ""
#~ "Alternativt kan du for meget små USB-drev på kun nogle få megabyte hente "
#~ "aftrykket &netboot-mini-iso; fra mappen <filename>netboot</filename> (på "
#~ "placeringen nævnt i <xref linkend=\"where-files\"/>)."

#~ msgid ""
#~ "Simply writing the installation image to USB like this should work fine "
#~ "for most users. The other options below are more complex, mainly for "
#~ "people with specialised needs."
#~ msgstr ""
#~ "En simpel skrivning af installationsaftrykket til USB bør fungere fint "
#~ "for de fleste brugere. De andre muligheder er mere komplekse og "
#~ "hovedsagelig for folk med specielle behov."

#~ msgid ""
#~ "The hybrid image on the stick does not occupy all the storage space, so "
#~ "it may be worth considering using the free space to hold firmware files "
#~ "or packages or any other files of your choice. This could be useful if "
#~ "you have only one stick or just want to keep everything you need on one "
#~ "device."
#~ msgstr ""
#~ "Hybridaftrykket på drevet bruger ikke al lagerplads, så kan være en "
#~ "overvejelse værd at bruge den ledige plads til firmware-filer eller "
#~ "pakker eller andre filer efter dit eget valg. Dette kan være nyttigt, "
#~ "hvis du kun har et drev eller bare ønsker at have alt på en enhed."

#~ msgid ""
#~ "To do so, use cfdisk or any other partitioning tool to create an "
#~ "additional partition on the stick. Then create a (FAT) filesystem on the "
#~ "partition, mount it and copy or unpack the firmware onto it, for example "
#~ "with: <informalexample><screen>\n"
#~ "# mkdosfs -n FIRMWARE /dev/sdX3\n"
#~ "# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt\n"
#~ "</screen></informalexample> Take care that you use the correct device "
#~ "name for your USB stick. The <command>mkdosfs</command> command is "
#~ "contained in the <classname>dosfstools</classname> &debian; package."
#~ msgstr ""
#~ "For dette, brug cfdisk eller et andet partitioneringsværktøj til at "
#~ "oprette en yderligere partition på drevet. Opret så et (FAT) filsystem på "
#~ "partitionen, monter den og kopier eller udpak firmwaren på den, for "
#~ "eksempel med: <informalexample><screen>\n"
#~ "# mkdosfs -n FIRMWARE /dev/sdX3\n"
#~ "# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/sti/til/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt\n"
#~ "</screen></informalexample> Husk at bruge det korrekte enhedsnavn for dit "
#~ "USB-drev. Kommandoen <command>mkdosfs</command> er indeholdt i &debian;"
#~ "pakken <classname>dosfstools</classname>."

#~ msgid ""
#~ "If you have chosen the <filename>mini.iso</filename> to be written to the "
#~ "USB stick, the second partition doesn't have to be created, as - very "
#~ "nicely - it will already be present. Unplugging and replugging the USB "
#~ "stick should make the two partitions visible."
#~ msgstr ""
#~ "Hvis du har valg at <filename>mini.iso</filename> skal skrives til USB-"
#~ "drevet, så skal den anden partition ikke oprettes, da den - meget "
#~ "passende - allerede vil være til stede. Fjernelse og isættelse af USB-"
#~ "drevet bør gøre de to partitioner synlige."

#~ msgid "Manually copying files to the USB stick"
#~ msgstr "Manuelt kopiere filer til USB-drevet"

#~ msgid ""
#~ "Prior to isohybrid technology being used for &debian; installation "
#~ "images, the methods documented in the chapters below were used to prepare "
#~ "media for booting from USB devices. These have been superseded by the "
#~ "technique in <xref linkend=\"usb-copy-isohybrid\"/>, but have been left "
#~ "here for educational and historical purposes and in case they are useful "
#~ "to some user."
#~ msgstr ""
#~ "Før teknologien isohybrid blev brugt til &debian;-installationsaftryk, "
#~ "blev metoderne dokumenteret i afsnittene nedenfor brugt til at forberede "
#~ "medier for opstart fra USB-enheder. Disse er blevet afløst af teknikken i "
#~ "<xref linkend=\"usb-copy-isohybrid\"/>, men er blevet bevaret her af "
#~ "undervisningsmæssige og historiske formål, og i tilfælde af, at de skulle "
#~ "være nyttig for nogle brugere."

#~ msgid ""
#~ "An alternative to the method described in <xref linkend=\"usb-copy-"
#~ "isohybrid\"/> is to manually copy the installer files, and also an "
#~ "installation image to the stick. Note that the USB stick should be at "
#~ "least 1 GB in size (smaller setups are possible using the files from "
#~ "netboot, following <xref linkend=\"usb-copy-flexible\"/>)."
#~ msgstr ""
#~ "En alternativ måde til metoderne beskrevet i <xref linkend=\"usb-copy-"
#~ "isohybrid\"/> er manuelt at kopiere installationsfilerne, og et "
#~ "installationsaftryk til drevet. Bemærk at USB-drevet bør være på mindst 1 "
#~ "GB (mindre opsætninger er mulige, hvis du bruger filerne fra netboot, "
#~ "efter <xref linkend=\"usb-copy-flexible\"/>)."

#~ msgid ""
#~ "There is an all-in-one file &hdmedia-boot-img; which contains all the "
#~ "installer files (including the kernel)<phrase arch=\"x86\"> as well as "
#~ "<classname>syslinux</classname> and its configuration file</phrase>."
#~ msgstr ""
#~ "Der er en alt i en-fil &hdmedia-boot-img; som indeholder alle "
#~ "installationsprogrammets filer (inklusive the kernen) <phrase arch="
#~ "\"x86\">samt <classname>syslinux</classname> og dets konfigurationsfil</"
#~ "phrase>."

#~ msgid ""
#~ "Note that, although convenient, this method does have one major "
#~ "disadvantage: the logical size of the device will be limited to 1 GB, "
#~ "even if the capacity of the USB stick is larger. You will need to "
#~ "repartition the USB stick and create new file systems to get its full "
#~ "capacity back if you ever want to use it for some different purpose."
#~ msgstr ""
#~ "Bemærk dog, selvom det er nemt, at denne metode har en stor ulempe: Den "
#~ "logiske størrelse på enheden vil være begrænset til 1 GB, selv hvis "
#~ "kapaciteten på USB-drevet er større. Du skal partitionere USB-drevet igen "
#~ "og oprette nye filsystemer for at få den fulde kapacitet tilbage, hvis du "
#~ "ønsker at bruge den til andre formål."

#~ msgid "Simply extract this image directly to your USB stick:"
#~ msgstr "Udtræk dette aftryk direkte til dit USB-drev:"

#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"

#~ msgid ""
#~ "After that, mount the USB memory stick <phrase arch="
#~ "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
#~ "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
#~ "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will "
#~ "now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch="
#~ "\"powerpc\">an HFS filesystem</phrase> on it, and copy a &debian; ISO "
#~ "image (netinst or full CD; see <xref linkend=\"official-cdrom\"/>) to it. "
#~ "Unmount the stick (<userinput>umount /mnt</userinput>) and you are done."
#~ msgstr ""
#~ "Derefter monteres USB-hukommelsesdrevet <phrase arch="
#~ "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
#~ "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
#~ "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> som nu vil "
#~ "have <phrase arch=\"x86\">et FAT-filsystem</phrase> <phrase arch=\"powerpc"
#~ "\">et HFS-filsystem</phrase> på sig og kopier et &debian; ISO-aftryk "
#~ "(netinst eller fuld cd; se <xref linkend=\"official-cdrom\"/>) til den. "
#~ "Afmonter drevet (<userinput>umount /mnt</userinput>) og du er færdig."

#~ msgid "Manually copying files to the USB stick &mdash; the flexible way"
#~ msgstr "Manuelt kopiere filer til USB-drevet &mdash; den fleksible måde"

#~ msgid ""
#~ "If you like more flexibility or just want to know what's going on, you "
#~ "should use the following method to put the files on your stick. One "
#~ "advantage of using this method is that &mdash; if the capacity of your "
#~ "USB stick is large enough &mdash; you have the option of copying any ISO "
#~ "image, even a DVD image, to it."
#~ msgstr ""
#~ "Hvis du ønsker højere fleksibilitet eller bare ønsker at vide, hvad der "
#~ "foregår, så kan du bruge en af de følgende metoder til at placere filerne "
#~ "på dit drev. En af fordelene ved denne metode er at &mdash; hvis "
#~ "kapaciteten på dit USB-drev er stor nok &mdash; så kan du kopiere ethvert "
#~ "ISO-aftryk eller endda et dvd-aftryk til drevet."

#~ msgid "Partitioning and adding a boot loader"
#~ msgstr "Partitionering og tilføjelse af en opstartsindlæser"

#~ msgid ""
#~ "We will show how to set up the memory stick to use the first partition, "
#~ "instead of the entire device."
#~ msgstr ""
#~ "Vi vil vise hvordan hukommelsesdrevet opsættes til at bruge den første "
#~ "partition, i stedet for hele enheden."

#~ msgid ""
#~ "In order to start the kernel after booting from the USB stick, we will "
#~ "put a boot loader on the stick. Although any boot loader should work, "
#~ "it's convenient to use <classname>syslinux</classname>, since it uses a "
#~ "FAT16 partition and can be reconfigured by just editing a text file. Any "
#~ "operating system which supports the FAT file system can be used to make "
#~ "changes to the configuration of the boot loader."
#~ msgstr ""
#~ "For at starte kernen efter opstart fra USB-drevet, vil vi placere en "
#~ "opstartsindlæser på drevet. Selvom enhver opstartsindlæser bør fungere, "
#~ "er det praktisk at bruge <classname>syslinux</classname>, da den bruger "
#~ "en FAT16-partition og kan konfigureres om ved bare at redigere en "
#~ "tekstfil. Ethvert operativsystem som understøtter FAT-filsystemet kan "
#~ "bruges til at lave ændringer til konfigurationen af opstartsindlæseren."

#~ msgid ""
#~ "First, you need to install the <classname>syslinux</classname> and "
#~ "<classname>mtools</classname> packages on your system."
#~ msgstr ""
#~ "Først skal du installere pakkerne <classname>syslinux</classname> og "
#~ "<classname>mtools</classname> på dit system."

#~ msgid ""
#~ "Since most USB sticks come pre-configured with a single FAT16 partition, "
#~ "you probably won't have to repartition or reformat the stick. If you have "
#~ "to do that anyway, use <command>cfdisk</command> or any other "
#~ "partitioning tool to create a FAT16 partition now<footnote> <para> Don't "
#~ "forget to activate the <quote>bootable</quote> flag. </para> </footnote>, "
#~ "and then install an MBR using: <informalexample><screen>\n"
#~ "# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
#~ "</screen></informalexample> Now create the filesystem using: "
#~ "<informalexample><screen>\n"
#~ "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> Take care that you use the correct device "
#~ "name for your USB stick. The <command>mkdosfs</command> command is "
#~ "contained in the <classname>dosfstools</classname> &debian; package."
#~ msgstr ""
#~ "Da de fleste USB-drev kommer prækonfigurede med en enkel FAT16-partition, "
#~ "så skal du sandsynligvis ikke partitioner eller formatere drevet igen. "
#~ "Hvis du alligevel skal gøre dette, så brug <command>cfdisk</command> "
#~ "eller et andet partitioneringsværktøj til at oprette en FAT16-"
#~ "partition<footnote> <para> Glem ikke at angive opstartsflaget "
#~ "<quote>bootable</quote>. </para> </footnote>, installer en MBR via: "
#~ "<informalexample><screen>\n"
#~ "# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
#~ "</screen></informalexample> Now create the filesystem using: "
#~ "<informalexample><screen>\n"
#~ "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> Vær opmærksom på at bruge det korrekte "
#~ "enhedsnavn for dit USB-drev. Kommandoen <command>mkdosfs</command> er "
#~ "indeholdt i &debian;-pakken <classname>dosfstools</classname>."

#~ msgid ""
#~ "Having a correctly partitioned USB stick (now), you need to put "
#~ "<classname>syslinux</classname> on the FAT16 partition with: "
#~ "<informalexample><screen>\n"
#~ "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample> Again, take care that you use the correct "
#~ "device name. The partition must not be mounted when starting "
#~ "<command>syslinux</command>. This procedure writes a boot sector to the "
#~ "partition and creates the file <filename>ldlinux.sys</filename> which "
#~ "contains the boot loader code."
#~ msgstr ""
#~ "For at få et korrekt partitioneret USB-drev (nu), skal du placere "
#~ "<classname>syslinux</classname> på FAT16-partionen med: "
#~ "<informalexample><screen>\n"
#~ "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
#~ "</screen></informalexample>  Igen husk at sikre dig, at du bruger det "
#~ "korrekte enhedsnavn. Partitionen må ikke være monteret når "
#~ "<command>syslinux</command> startes. Denne procedure skriver en "
#~ "opstartssektor til partionen og opretter filen <filename>ldlinux.sys</"
#~ "filename>, som indeholder koden for opstartsindlæseren."

#~ msgid "Adding the installer files"
#~ msgstr "Tilføjelse af installationsfilerne"

#~ msgid ""
#~ "There are two different installation variants to choose here: The hd-"
#~ "media variant needs an installation ISO file on the stick, to load "
#~ "installer modules and the base system from. The netboot installer however "
#~ "will load all that from a &debian; mirror."
#~ msgstr ""
#~ "Der er to forskellige installationsvarianter at vælge fra: varianten hd-"
#~ "media skal bruge en ISO-installationsfil på drevet, for at indlæse "
#~ "installationsmodulerne og basissystemet. Installationsprogrammet netboot "
#~ "vil dog indlæse alt det fra et &debian;-spejl."

#~ msgid ""
#~ "According to your choice, you have to download some installer files from "
#~ "the hd-media or netboot subdirectory of <ulink url=\"&url-debian-"
#~ "installer;images\">debian/dists/&releasename;/main/installer-"
#~ "&architecture;/current/images/</ulink> on any &debian; mirror: "
#~ "<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
#~ "<filename>linux</filename> (kernel binary) </para></listitem> "
#~ "<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
#~ "para></listitem> </itemizedlist> You can choose between either the text-"
#~ "based version of the installer (the files can be found directly in hd-"
#~ "media or netboot) or the graphical version (look in the respective "
#~ "<filename>gtk</filename> subdirectories)."
#~ msgstr ""
#~ "Jævnfør dit valg, så skal du hente nogle installationsfiler fra "
#~ "undermappen hd-media eller netboot i <ulink url=\"&url-debian-installer;"
#~ "images\">debian/dists/&releasename;/main/installer-&architecture;/current/"
#~ "images/</ulink> på ethvert &debian;-spejl: <itemizedlist> "
#~ "<listitem><para> <filename>vmlinuz</filename> eller <filename>linux</"
#~ "filename> (binær fil for kernen) </para></listitem> <listitem><para> "
#~ "<filename>initrd.gz</filename> (oprindelig ramdisk-aftryk) </para></"
#~ "listitem> </itemizedlist> Du kan vælge mellem enten den tekstbaserede "
#~ "version af installationsprogrammet (filerne kan findes direkte i hd-media "
#~ "eller netboot) eller den grafiske version se i de respektive "
#~ "<filename>gtk</filename>-undermapper)."

#~ msgid ""
#~ "Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
#~ "replaceable> /mnt</userinput>) and copy the downloaded files to the root "
#~ "directory of the stick."
#~ msgstr ""
#~ "Monter partitionen (<userinput>mount /dev/<replaceable>sdX1</"
#~ "replaceable> /mnt</userinput>) og kopier de hentede filer til rodmappen "
#~ "på drevet."

#~ msgid ""
#~ "Next you should create a text file named <filename>syslinux.cfg</"
#~ "filename> in the root directory of the stick as configuration file for "
#~ "syslinux, which at a bare minimum should contain the following line: "
#~ "<informalexample><screen>\n"
#~ "default vmlinuz initrd=initrd.gz\n"
#~ "</screen></informalexample> Change the name of the kernel binary to "
#~ "<quote><filename>linux</filename></quote> if you used files from "
#~ "<filename>netboot</filename>."
#~ msgstr ""
#~ "Derefter bør du oprette en tekstfil navngivet <filename>syslinux.cfg</"
#~ "filename> i rodmappen på drevet som konfigurationsfil for syslinux, der "
#~ "som et absolut minimum skal indeholde den følgende linje: "
#~ "<informalexample><screen>\n"
#~ "default vmlinuz initrd=initrd.gz\n"
#~ "</screen></informalexample> Ændr navnet for kernens binære fil til "
#~ "<quote><filename>linux</filename></quote> hvis du anvendte filer fra "
#~ "<filename>netboot</filename>."

#~ msgid ""
#~ "For the graphical installer (from <filename>gtk</filename>) you should "
#~ "add <userinput>vga=788</userinput> at the end of the line. Other "
#~ "parameters can be appended as desired."
#~ msgstr ""
#~ "For det grafiske installationsprogram (fra <filename>gtk</filename>) bør "
#~ "du tilføje <userinput>vga=788</userinput> til den anden linje. Andre "
#~ "parametre kan tilføjes som ønsket."

#~ msgid ""
#~ "To enable the boot prompt to permit further parameter appending, add a "
#~ "<userinput>prompt 1</userinput> line."
#~ msgstr ""
#~ "For at aktivere opstartsprompten til at acceptere yderligere "
#~ "parametertilføjelse, tilføjes en linje <userinput>prompt 1</userinput>."

#~ msgid ""
#~ "If you used files from <filename>hd-media</filename>, you should now copy "
#~ "the ISO file of a &debian; installation image onto the stick. (For the "
#~ "<filename>netboot</filename> variant this is not needed.)"
#~ msgstr ""
#~ "Hvis du anvendte filer fra <filename>hd-media</filename>, så bør du nu "
#~ "kopiere ISO-filen for et &debian;-installationsaftryk ned på drevet. (For "
#~ "varianten <filename>netboot</filename> er dette ikke krævet)."

#~ msgid ""
#~ "You can use either a netinst or a full CD/DVD image (see <xref linkend="
#~ "\"official-cdrom\"/>). Be sure to select one that fits on your stick. "
#~ "Note that the <quote>netboot <filename>mini.iso</filename></quote> image "
#~ "is not usable for this purpose."
#~ msgstr ""
#~ "Du kan bruge enten en netinst eller et fuld cd/dvd-aftryk (se <xref "
#~ "linkend=\"official-cdrom\"/>). Vær sikker på at vælge et som passer. "
#~ "Bemærk at <quote>netboot <filename>mini.iso</filename></quote>-aftrykket "
#~ "ikke er brugbar til dette formål."

#~ msgid ""
#~ "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
#~ "userinput>)."
#~ msgstr ""
#~ "Når du er færdig, afmonter USB-drevet (<userinput>umount /mnt</"
#~ "userinput>)."

#~ msgid ""
#~ "Hard disk installer booting from DOS using <command>loadlin</command>"
#~ msgstr ""
#~ "Harddiskinstallationen starter op fra DOS med <command>loadlin</command>"

#~ msgid ""
#~ "This section explains how to prepare your hard drive for booting the "
#~ "installer from DOS using <command>loadlin</command>."
#~ msgstr ""
#~ "Dette afsnit forklarer hvordan du forbereder din harddisk til at starte "
#~ "installationsprogrammet op fra DOS med <command>loadlin</command>."

#~ msgid ""
#~ "Copy the following directories from a &debian; installation image to "
#~ "<filename>c:\\</filename>."
#~ msgstr ""
#~ "Kopier de følgende mapper fra et &debian;-installationsaftryk til "
#~ "<filename>c:\\</filename>."

#~ msgid ""
#~ "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
#~ msgstr ""
#~ "<filename>/&x86-install-dir;</filename> (kernens binære fil og "
#~ "ramdiskaftryk)"

#~ msgid "<filename>/tools</filename> (loadlin tool)"
#~ msgstr "<filename>/tools</filename> (loadlin-værktøj)"

#~ msgid ""
#~ "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
#~ "<command>mac-fdisk</command>'s <userinput>C</userinput> command and "
#~ "extract the image directly to that:"
#~ msgstr ""
#~ "Opret en partition af typen »Apple_Bootstrap« på dit USB-drev via "
#~ "<command>mac-fdisk</command>s <userinput>C</userinput>-kommando og udtræk "
#~ "aftrykket direkte til denne:"

#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"

#~ msgid "Partitioning the USB stick"
#~ msgstr "Partitionering af USB-drevet"

#~ msgid ""
#~ "Most USB sticks do not come pre-configured in such a way that Open "
#~ "Firmware can boot from them, so you will need to repartition the stick. "
#~ "On Mac systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</"
#~ "replaceable></userinput>, initialise a new partition map using the "
#~ "<userinput>i</userinput> command, and create a new partition of type "
#~ "Apple_Bootstrap using the <userinput>C</userinput> command. (Note that "
#~ "the first \"partition\" will always be the partition map itself.) Then "
#~ "type <informalexample><screen>\n"
#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
#~ "</screen></informalexample> Take care that you use the correct device "
#~ "name for your USB stick. The <command>hformat</command> command is "
#~ "contained in the <classname>hfsutils</classname> &debian; package."
#~ msgstr ""
#~ "De fleste USB-drev er ikke prækonfigurerede på en sådan måde at Open "
#~ "Firmware kan starte op fra dem, så du skal partitionere drevet om. På Mac-"
#~ "systemer, kør <userinput>mac-fdisk /dev/<replaceable>sdX</replaceable></"
#~ "userinput>, initialiser et nyt partitionskort via kommandoen "
#~ "<userinput>i</userinput>, og opret en ny partition af typen "
#~ "Apple_Bootstrap via kommandoen <userinput>C</userinput>. (Bemærk at den "
#~ "første »partition« altid vil være selve partitionskortet). Tast så "
#~ "<informalexample><screen>\n"
#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
#~ "</screen></informalexample> Sikr dig, at du bruger det korrekte "
#~ "enhedsnavn på dit USB-drev. Kommandoen <command>hformat</command> er "
#~ "indeholdt i &debian;-pakken <classname>hfsutils</classname>."

#~ msgid ""
#~ "In order to start the kernel after booting from the USB stick, we will "
#~ "put a boot loader on the stick. The <command>yaboot</command> boot loader "
#~ "can be installed on an HFS filesystem and can be reconfigured by just "
#~ "editing a text file. Any operating system which supports the HFS file "
#~ "system can be used to make changes to the configuration of the boot "
#~ "loader."
#~ msgstr ""
#~ "For at starte kernen efter opstart fra USB-drevet, vil vi placere en "
#~ "opstartsindlæser på drevet. Opstartsindlæseren <command>yaboot</command> "
#~ "kan installeres på et HFS-filsystem og kan konfigureres om ved bare at "
#~ "redigere en tekstfil. Alle operativsystemer som understøtter HFS-"
#~ "filsystemet kan bruges til at udføre ændringer til konfigurationen af "
#~ "opstartsindlæseren."

#~ msgid ""
#~ "The normal <command>ybin</command> tool that comes with <command>yaboot</"
#~ "command> does not yet understand USB storage devices, so you will have to "
#~ "install <command>yaboot</command> by hand using the <classname>hfsutils</"
#~ "classname> tools. Type <informalexample><screen>\n"
#~ "$ hmount /dev/<replaceable>sdX2</replaceable>\n"
#~ "$ hcopy -r /usr/lib/yaboot/yaboot :\n"
#~ "$ hattrib -c UNIX -t tbxi :yaboot\n"
#~ "$ hattrib -b :\n"
#~ "$ humount\n"
#~ "</screen></informalexample> Again, take care that you use the correct "
#~ "device name. The partition must not be otherwise mounted during this "
#~ "procedure. This procedure writes the boot loader to the partition, and "
#~ "uses the HFS utilities to mark it in such a way that Open Firmware will "
#~ "boot it. Having done this, the rest of the USB stick may be prepared "
#~ "using the normal Unix utilities."
#~ msgstr ""
#~ "Det normale værktøj <command>ybin</command>, som følger med "
#~ "<command>yaboot</command> forstår endnu ikke USB-lagerenheder, så du skal "
#~ "installere <command>yaboot</command> manuelt via <classname>hfsutils</"
#~ "classname>-værktøjerne. Tast <informalexample><screen>\n"
#~ "$ hmount /dev/<replaceable>sdX2</replaceable>\n"
#~ "$ hcopy -r /usr/lib/yaboot/yaboot :\n"
#~ "$ hattrib -c UNIX -t tbxi :yaboot\n"
#~ "$ hattrib -b :\n"
#~ "$ humount\n"
#~ "</screen></informalexample> Sikr dig, at du bruger det korrekte "
#~ "enhedsnavn. Partitionen må ikke på anden vis monteres under denne "
#~ "procedure. Denne procedure skriver opstartsindlæseren til partitionen, og "
#~ "bruger HFS-redskaberne til at markere den på en måde så at Open Firmware "
#~ "vil starte den op. Når dette er gjort kan resten af USB-drevet forberedes "
#~ "med normale UNIX-redskaber."

#~ msgid "Adding the installer image"
#~ msgstr "Tilføjelse af installationsprogrammets aftryk"

#~ msgid ""
#~ "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
#~ "replaceable> /mnt</userinput>) and copy the following installer image "
#~ "files to the stick:"
#~ msgstr ""
#~ "Monter partitionen (<userinput>mount /dev/<replaceable>sdX2</"
#~ "replaceable> /mnt</userinput>) og kopier de følgende "
#~ "installationsaftryksfiler til drevet:"

#~ msgid "<filename>vmlinux</filename> (kernel binary)"
#~ msgstr "<filename>vmlinux</filename> (kernens binære fil)"

#~ msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
#~ msgstr "<filename>initrd.gz</filename> (oprindelig ramdisk-aftryk)"

#~ msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
#~ msgstr "<filename>yaboot.conf</filename> (yaboot-konfigurationsfil)"

#~ msgid "<filename>boot.msg</filename> (optional boot message)"
#~ msgstr "<filename>boot.msg</filename> (valgfri opstartsbesked)"

#~ msgid ""
#~ "The <filename>yaboot.conf</filename> configuration file should contain "
#~ "the following lines: <informalexample><screen>\n"
#~ "default=install\n"
#~ "root=/dev/ram\n"
#~ "\n"
#~ "message=/boot.msg\n"
#~ "\n"
#~ "image=/vmlinux\n"
#~ "        label=install\n"
#~ "        initrd=/initrd.gz\n"
#~ "        initrd-size=10000\n"
#~ "        read-only\n"
#~ "</screen></informalexample> Please note that the <userinput>initrd-size</"
#~ "userinput> parameter may need to be increased, depending on the image you "
#~ "are booting."
#~ msgstr ""
#~ "Konfigurationsfilen <filename>yaboot.conf</filename> bør indeholder de "
#~ "følgende linjer: <informalexample><screen>\n"
#~ "default=install\n"
#~ "root=/dev/ram\n"
#~ "\n"
#~ "message=/boot.msg\n"
#~ "\n"
#~ "image=/vmlinux\n"
#~ "        label=install\n"
#~ "        initrd=/initrd.gz\n"
#~ "        initrd-size=10000\n"
#~ "        read-only\n"
#~ "</screen></informalexample> Bemærk venligst at parameteren "
#~ "<userinput>initrd-size</userinput> måske skal øges, afhængig af aftrykket "
#~ "du indlæser."

#~ msgid ""
#~ "If you used an <filename>hd-media</filename> image, you should now copy "
#~ "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
#~ "a netinst or a full CD image (see <xref linkend=\"official-cdrom\"/>). Be "
#~ "sure to select one that fits. Note that the <quote>netboot <filename>mini."
#~ "iso</filename></quote> image is not usable for this purpose. </para> </"
#~ "footnote> onto the stick. When you are done, unmount the USB memory stick "
#~ "(<userinput>umount /mnt</userinput>)."
#~ msgstr ""
#~ "Hvis du anvendte et <filename>hd-media</filename>-aftryk, så bør du "
#~ "kopiere ISO-filen for et &debian;-ISO-aftryk<footnote> <para> Du kan "
#~ "bruge enten en netinst eller et fuld cd-aftryk (se <xref linkend="
#~ "\"official-cdrom\"/>). Vær sikker på at vælge et som passer. Bemærk at "
#~ "<quote>netboot <filename>mini.iso</filename></quote>-aftrykket ikke er "
#~ "brugbar til dette formål. </para> </footnote> ned på drevet. Når du er "
#~ "færdig, afmonter USB-drevet (<userinput>umount /mnt</userinput>)."

#~ msgid ""
#~ "The installer cannot boot from files on an HFS+ file system. MacOS System "
#~ "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. "
#~ "To determine whether your existing file system is HFS+, select "
#~ "<userinput>Get Info</userinput> for the volume in question. HFS file "
#~ "systems appear as <userinput>Mac OS Standard</userinput>, while HFS+ file "
#~ "systems say <userinput>Mac OS Extended</userinput>. You must have an HFS "
#~ "partition in order to exchange files between MacOS and Linux, in "
#~ "particular the installation files you download."
#~ msgstr ""
#~ "Installationsprogrammet kan ikke starte op fra filer på et HFS+-"
#~ "filsystem. MacOS System 8.1 og senere kan bruge HFS+-filsystemer; "
#~ "NewWorld PowerMacs bruger alle HFS+. For at bestemme om dit eksisterende "
#~ "filsystem er HFS+, vælges <userinput>Hent information</userinput> for "
#~ "diskenheden. HFS-filsystemet fremstår som <userinput>Mac OS Standard</"
#~ "userinput>, mens HFS+-filsystemet er <userinput>Mac OS Extended</"
#~ "userinput>. Du skal have en HFS-partition for at udtrække filer mellem "
#~ "MacOS og Linux, specielt installationsfilerne du hentede."

#~ msgid ""
#~ "Different programs are used for hard disk installation system booting, "
#~ "depending on whether the system is a <quote>NewWorld</quote> or an "
#~ "<quote>OldWorld</quote> model."
#~ msgstr ""
#~ "Forskellige programmer bruges til systemopstart af installationen fra "
#~ "harddisk afhængig af om systemet er <quote>NewWorld</quote> eller "
#~ "<quote>OldWorld</quote>."

#~ msgid ""
#~ "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
#~ "idea to use DHCP instead of BOOTP. Some of the latest machines are unable "
#~ "to boot using BOOTP."
#~ msgstr ""
#~ "For PowerPC, hvis du har en NewWorld Power Macintosh-maskine, er det en "
#~ "god ide at bruge DHCP i stedet for BOOTP. Nogle af de seneste maskiner "
#~ "kan ikke starte op via BOOTP."

#~ msgid ""
#~ "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. "
#~ "There is an <classname>rbootd</classname> package available in &debian;."
#~ msgstr ""
#~ "Nogle ældre HPPA-maskiner (f.eks. 715/75) bruger RBOOTD frem for BOOTP. "
#~ "Der er en <classname>rbootd</classname>-pakke tilgængelig i &debian;."

#~ msgid ""
#~ "If you intend to install &debian; on an SGI machine and your TFTP server "
#~ "is a GNU/Linux box running Linux 2.4, you'll need to set the following on "
#~ "your server: <informalexample><screen>\n"
#~ "# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
#~ "</screen></informalexample> to turn off Path MTU discovery, otherwise the "
#~ "SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets "
#~ "are sent from a source port no greater than 32767, or the download will "
#~ "stall after the first packet. Again, it's Linux 2.4.X tripping this bug "
#~ "in the PROM, and you can avoid it by setting <informalexample><screen>\n"
#~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
#~ "</screen></informalexample> to adjust the range of source ports the Linux "
#~ "TFTP server uses."
#~ msgstr ""
#~ "Hvis du planlægger at installere &debian; på en SGI-maskine og din TFTP-"
#~ "server er en GNU/Linux-boks, der kører Linux 2.4, så skal du angive det "
#~ "følgende på din server: nux box running Linux 2.4, you'll need to set the "
#~ "following on your server: <informalexample><screen>\n"
#~ "# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
#~ "</screen></informalexample> for at deaktivere Path MTU-registrering, "
#~ "ellers kan SGI's PROM ikke hente kernen. Derudover skal du sikre dig, at "
#~ "TFTP-pakker sendes fra en kildeport, der ikke er højere end 32767, ellers "
#~ "vil overførslen stoppe efter den første pakke. Igen det er Linux 2.4.x "
#~ "der udløser denne fejl i PROM'en, og du kan undgå den ved at angive "
#~ "<informalexample><screen>\n"
#~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
#~ "</screen></informalexample> for at justere intervallet af kildeporte som "
#~ "Linux TFTP-serveren bruger."

#~ msgid ""
#~ "On NewWorld Power Macintosh machines, you will need to set up the "
#~ "<command>yaboot</command> boot loader as the TFTP boot image. "
#~ "<command>Yaboot</command> will then retrieve the kernel and RAMdisk "
#~ "images via TFTP itself. You will need to download the following files "
#~ "from the <filename>netboot/</filename> directory:"
#~ msgstr ""
#~ "På NewWorld Power Macintosh-maskiner skal du opsætte opstartsindlæseren "
#~ "<command>yaboot</command> som TFTP-opstartsaftryk. <command>Yaboot</"
#~ "command> vil selv hente kernen og RAMdisk-aftryk via TFTP. Du skal hente "
#~ "de følgende filer fra mappen <filename>netboot/</filename>:"

#~ msgid "vmlinux"
#~ msgstr "vmlinux"

#~ msgid "initrd.gz"
#~ msgstr "initrd.gz"

#~ msgid "yaboot"
#~ msgstr "yaboot"

#~ msgid "yaboot.conf"
#~ msgstr "yaboot.conf"

#~ msgid "boot.msg"
#~ msgstr "boot.msg"

#~ msgid ""
#~ "For PXE booting, everything you should need is set up in the "
#~ "<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
#~ "tarball into the <command>tftpd</command> boot image directory. Make sure "
#~ "your dhcp server is configured to pass <filename>/debian-installer/ia64/"
#~ "elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
#~ msgstr ""
#~ "For PXE-opstart befinder alt du bør sætte op sig i tarball'en "
#~ "<filename>netboot/netboot.tar.gz</filename>. Udpak denne tarbal i mappen "
#~ "for opstartsaftrykket <command>tftpd</command>. Sikr dig at din dhcp-"
#~ "server er konfigureret til at sende <filename>/debian-installer/ia64/"
#~ "elilo.efi</filename> til <command>tftpd</command> som filnavnet at starte "
#~ "op."

#~ msgid "SPARC TFTP Booting"
#~ msgstr "SPARC TFTP-opstart"

#~ msgid ""
#~ "Some SPARC architectures add the subarchitecture names, such as "
#~ "<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if "
#~ "your system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the "
#~ "filename would be <filename>C0A80103.SUN4C</filename>. However, there are "
#~ "also subarchitectures where the file the client looks for is just "
#~ "<filename>client-ip-in-hex</filename>. An easy way to determine the "
#~ "hexadecimal code for the IP address is to enter the following command in "
#~ "a shell (assuming the machine's intended IP is 10.0.0.4). "
#~ "<informalexample><screen>\n"
#~ "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
#~ "</screen></informalexample> To get to the correct filename, you will need "
#~ "to change all letters to uppercase and if necessary append the "
#~ "subarchitecture name."
#~ msgstr ""
#~ "Nogle SPARC-arkitekturer tilføjer underarkitekturnavne, såsom "
#~ "<quote>SUN4M</quote> eller <quote>SUN4C</quote>, til filnavnet. Hvis dit "
#~ "systems underarkitektur er en SUN4c, og dets IP er 192.168.1.3, vil "
#~ "filnavnet være <filename>C0A80103.SUN4C</filename>. Men der er også "
#~ "underarkitekturer hvor filen klienten kigger efter kun er "
#~ "<filename>client-ip-in-hex</filename>. En nem måde at bestemme den "
#~ "hexadecimale kode for IP-adressen er at indtaste den følgende kommando i "
#~ "en skal (under antagelse af at maskinens forventede IP er 10.0.0.4). "
#~ "<informalexample><screen>\n"
#~ "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
#~ "</screen></informalexample> For at hente det korrekte filnavn, så skal du "
#~ "ændre alle bogstaverne til store bogstaver og om nødvendigt tilføje "
#~ "underarkitekturnavnet."

#~ msgid ""
#~ "If you've done all this correctly, giving the command <userinput>boot "
#~ "net</userinput> from the OpenPROM should load the image. If the image "
#~ "cannot be found, try checking the logs on your tftp server to see which "
#~ "image name is being requested."
#~ msgstr ""
#~ "Hvis du har gjort alt dette korrekt, vil kommandoen <userinput>boot net</"
#~ "userinput> fra OpenPROM indlæse aftrykket. Hvis aftrykket ikke kan "
#~ "findes, så prøv at kontrollere loggene på din tftp-server for at se "
#~ "hvilket aftryksnavn der anmodes om."

#~ msgid ""
#~ "You can also force some sparc systems to look for a specific file name by "
#~ "adding it to the end of the OpenPROM boot command, such as "
#~ "<userinput>boot net my-sparc.image</userinput>. This must still reside in "
#~ "the directory that the TFTP server looks in."
#~ msgstr ""
#~ "Du kan også fremtvinge nogle sparc-systemer til at kigge efter et "
#~ "specifikt filnavn ved at tilføjet det til slutningen af OpenPROM-"
#~ "opstartskommandoen, såsom <userinput>boot net my-sparc.image</userinput>. "
#~ "Dette skal stadig befinde sig i mappen som TFTP-serveren kigger i."

#~ msgid "SGI TFTP Booting"
#~ msgstr "SGI TFTP-opstart"

#~ msgid ""
#~ "On SGI machines you can rely on the <command>bootpd</command> to supply "
#~ "the name of the TFTP file. It is given either as the <userinput>bf=</"
#~ "userinput> in <filename>/etc/bootptab</filename> or as the "
#~ "<userinput>filename=</userinput> option in <filename>/etc/dhcpd.conf</"
#~ "filename>."
#~ msgstr ""
#~ "På SGI-maskiner kan du stole på <command>bootpd</command> for at levere "
#~ "navnet på TFTP-filen. Den angives enten som <userinput>bf=</userinput> i "
#~ "<filename>/etc/bootptab</filename> eller som <userinput>filename=</"
#~ "userinput>-tlvalget i <filename>/etc/dhcpd.conf</filename>."

#~ msgid ""
#~ "Create a second, FAT partition on the stick, mount the partition and copy "
#~ "or unpack the firmware onto it. For example:"
#~ msgstr ""
#~ "Opret endnu en FAT-partition på drevet, monter partitionen og kopier "
#~ "eller udpak firmwaren til den. For eksempel:"

#~ msgid ""
#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt"
#~ msgstr ""
#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
#~ "# cd /mnt\n"
#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
#~ "# cd /\n"
#~ "# umount /mnt"

#~ msgid ""
#~ "Hard disk installer booting from Linux using <command>LILO</command> or "
#~ "<command>GRUB</command>"
#~ msgstr ""
#~ "Installationsprogrammets opstart fra harddisk fra Linux med brug af "
#~ "<command>LILO</command> eller <command>GRUB</command>"

#~ msgid "Creating Floppies from Disk Images"
#~ msgstr "Oprette disketter fra diskaftryk"

#~ msgid ""
#~ "Bootable floppy disks are generally used as a last resort to boot the "
#~ "installer on hardware that cannot boot from CD or by other means."
#~ msgstr ""
#~ "Opstartsbare disketter bruges generelt som en sidste mulighed til at "
#~ "starte installationsprogrammet op, på udstyr som ikke kan starte fra cd "
#~ "eller ved andre metoder."

#~ msgid ""
#~ "Booting the installer from floppy disk reportedly fails on Mac USB floppy "
#~ "drives."
#~ msgstr ""
#~ "Opstart af installationsprogrammet fra diskettedrev fejler på Mac USB-"
#~ "diskettedrev."

#~ msgid ""
#~ "Disk images are files containing the complete contents of a floppy disk "
#~ "in <emphasis>raw</emphasis> form. Disk images, such as <filename>boot."
#~ "img</filename>, cannot simply be copied to floppy drives. A special "
#~ "program is used to write the image files to floppy disk in <emphasis>raw</"
#~ "emphasis> mode. This is required because these images are raw "
#~ "representations of the disk; it is required to do a <emphasis>sector "
#~ "copy</emphasis> of the data from the file onto the floppy."
#~ msgstr ""
#~ "Diskaftryk er filer, der indeholder hele indholdet af en diskette i "
#~ "<emphasis>rå</emphasis> form. Diskaftryk, såsom <filename>boot.img</"
#~ "filename>, kan ikke bare kopieres til diskettedrev. Et speciel program "
#~ "bruges til at skrive aftryksfilerne til diskettedrev i <emphasis>rå</"
#~ "emphasis> tilstand. Dette er krævet da disse aftryk er rå "
#~ "repræsentationer af disken; det er krævet, at der udføres en "
#~ "<emphasis>sektorkopiering</emphasis> af dataene fra filen til disketten."

#~ msgid ""
#~ "There are different techniques for creating floppies from disk images. "
#~ "This section describes how to create floppies from disk images on "
#~ "different platforms."
#~ msgstr ""
#~ "Der er forskellige teknikker for oprettelse af disketter fra diskaftryk. "
#~ "Dette afsnit beskriver hvordan der oprettes disketter fra diskaftryk på "
#~ "forskellige platforme."

#~ msgid ""
#~ "Before you can create the floppies, you will first need to download them "
#~ "from one of the &debian; mirrors, as explained in <xref linkend="
#~ "\"downloading-files\"/>. <phrase arch=\"i386\">If you already have an "
#~ "installation CD-ROM or DVD, the floppy images may also be included on the "
#~ "CD/DVD.</phrase>"
#~ msgstr ""
#~ "Før du kan oprette disketterne, så skal du først hente dem fra en af "
#~ "&debian;-spejlene, som forklaret i <xref linkend=\"downloading-files\"/>. "
#~ "<phrase arch=\"i386\">Hvis du allerede har en installations-cd-rom eller "
#~ "dvd, så an disketteaftrykken også være inkluderet på cd'en eller dvd'en.</"
#~ "phrase>"

#~ msgid ""
#~ "No matter which method you use to create your floppies, you should "
#~ "remember to flip the write-protect tab on the floppies once you have "
#~ "written them, to ensure they are not damaged unintentionally."
#~ msgstr ""
#~ "Uanset hvilken metode du ønsker at bruge til at oprette disketterne med, "
#~ "så bør du huske at indstille skrivebeskyttelsesknappen på disketterne, "
#~ "når du har skrevet til dem, så de ikke uagtsomt bliver beskadiget."

#~ msgid "Writing Disk Images From a Linux or Unix System"
#~ msgstr "Skrivning af diskaftryk fra et Linux- eller Unix-system"

#~ msgid ""
#~ "To write the floppy disk image files to the floppy disks, you will "
#~ "probably need root access to the system. Place a good, blank floppy in "
#~ "the floppy drive. Next, use the command <informalexample><screen>\n"
#~ "$ dd if=<replaceable>filename</replaceable> of=/dev/fd0 bs=1024 "
#~ "conv=sync ; sync\n"
#~ "</screen></informalexample> where <replaceable>filename</replaceable> is "
#~ "one of the floppy disk image files. <filename>/dev/fd0</filename> is a "
#~ "commonly used name of the floppy disk device, it may be different on your "
#~ "workstation<phrase arch=\"sparc\"> (on Solaris, it is <filename>/dev/"
#~ "fd/0</filename>)</phrase>. The command may return to the prompt before "
#~ "Unix has finished writing the floppy disk, so look for the disk-in-use "
#~ "light on the floppy drive and be sure that the light is out and the disk "
#~ "has stopped revolving before you remove it from the drive. On some "
#~ "systems, you'll have to run a command to eject the floppy from the drive "
#~ "<phrase arch=\"sparc\"> (on Solaris, use <command>eject</command>, see "
#~ "the manual page)</phrase>."
#~ msgstr ""
#~ "For at skrive disketteaftryksfiler til disketter, så skal du "
#~ "sandsynligvis have administratoradgang til systemet. Placer en god, tom "
#~ "diskette i diskettedrevet. Brug kommandoen <informalexample><screen>\n"
#~ "$ dd if=<replaceable>filename</replaceable> of=/dev/fd0 bs=1024 "
#~ "conv=sync ; sync\n"
#~ "</screen></informalexample> hvor <replaceable>filnavn</replaceable> er et "
#~ "af disketteaftryksfilerne. <filename>/dev/fd0</filename> er et ofte "
#~ "anvendt navn for diskettedrevet, det kan være anderledes på din "
#~ "arbejdsstation<phrase arch=\"sparc\"> (på Solaris, er det <filename>/dev/"
#~ "fd/0</filename>)</phrase>. Kommandoen kan returnere til prompten før Unix "
#~ "er færdig med at skrive til disketten, så kig efter lyset for disketten "
#~ "er i brug på diskettedrevet og vær sikker på, at det er slukket og "
#~ "disketten er stoppet med at rotere før du fjerner den fra drevet. På "
#~ "nogle systemer, skal du køre en kommando for at skubbe disketten ud fra "
#~ "drevet <phrase arch=\"sparc\"> (på Solaris, brug <command>eject</"
#~ "command>, se manualsiden)</phrase>."

#~ msgid ""
#~ "Some systems attempt to automatically mount a floppy disk when you place "
#~ "it in the drive. You might have to disable this feature before the "
#~ "workstation will allow you to write a floppy in <emphasis>raw mode</"
#~ "emphasis>. Unfortunately, how to accomplish this will vary based on your "
#~ "operating system. <phrase arch=\"sparc\"> On Solaris, you can work around "
#~ "volume management to get raw access to the floppy. First, make sure that "
#~ "the floppy is auto-mounted (using <command>volcheck</command> or the "
#~ "equivalent command in the file manager). Then use a <command>dd</command> "
#~ "command of the form given above, just replace <filename>/dev/fd0</"
#~ "filename> with <filename>/vol/rdsk/<replaceable>floppy_name</"
#~ "replaceable></filename>, where <replaceable>floppy_name</replaceable> is "
#~ "the name the floppy disk was given when it was formatted (unnamed "
#~ "floppies default to the name <filename>unnamed_floppy</filename>). On "
#~ "other systems, ask your system administrator. </phrase>"
#~ msgstr ""
#~ "Nogle systemer forsøger automatisk at montere et diskettedrev, når du "
#~ "placerer den i drevet. Du skal måske deaktivere denne funktion, før "
#~ "arbejdsstationen vil give dig rettighed til at skrive en diskette i "
#~ "<emphasis>rå tilstand</emphasis>. Desværre vil metoden til at opnå dette "
#~ "variere med dit operativsystem. <phrase arch=\"sparc\"> På Solaris kan du "
#~ "arbejde dig omkring diskenhedshåndtering for at få rå adgang til "
#~ "disketten. Først skal du sikre dig, at disketten er automatisk monteret "
#~ "(via <command>volcheck</command> eller den tilsvarende kommando i "
#~ "filhåndteringen). Brug så kommandoen <command>dd</command> i formen "
#~ "angivet ovenfor, bare erstat <filename>/dev/fd0</filename> med <filename>/"
#~ "vol/rdsk/<replaceable>diskettenavn</replaceable></filename>, hvor "
#~ "<replaceable>diskettenavn</replaceable> er navnet som disketten fik, da "
#~ "den blev formateret (unavngivne disketter får navnet "
#~ "<filename>unnamed_floppy</filename>). På andre systemer, skal du spørge "
#~ "din systemadministrator. </phrase>"

#~ msgid ""
#~ "If writing a floppy on powerpc Linux, you will need to eject it. The "
#~ "<command>eject</command> program handles this nicely; you might need to "
#~ "install it."
#~ msgstr ""
#~ "Hvis du skriver til en diskette på powerpc-linux, så skal du skubbe den "
#~ "ud. Programmet <command>eject</command> håndterer dette pænt; du skal "
#~ "måske installere det."

#~ msgid "Writing Disk Images From DOS, Windows, or OS/2"
#~ msgstr "Skrivning af diskaftryk fra DOS, Windwos eller OS/2"

#~ msgid ""
#~ "If you have access to an i386 or amd64 machine, you can use one of the "
#~ "following programs to copy images to floppies."
#~ msgstr ""
#~ "Hvis du adgang til en i386- eller amd64-maskine, så kan du bruge en af de "
#~ "følgende programmer til at kopiere aftryk til disketter."

#~ msgid ""
#~ "The <command>rawrite1</command> and <command>rawrite2</command> programs "
#~ "can be used under MS-DOS. To use these programs, first make sure that you "
#~ "are booted into DOS. Trying to use these programs from within a DOS box "
#~ "in Windows, or double-clicking on these programs from the Windows "
#~ "Explorer is <emphasis>not</emphasis> expected to work."
#~ msgstr ""
#~ "Programmerne <command>rawrite1</command> og <command>rawrite2</command> "
#~ "kan bruges under MS-DOS. For at bruge disse programmer skal du først "
#~ "sikre dig, at du er startet i DOS. At bruge disse programmer inden fra en "
#~ "DOS-boks i Windows, eller dobbeltklik på disse programmer fra Windows "
#~ "Explorer kan <emphasis>ikke</emphasis> forventes at fungere."

#~ msgid ""
#~ "The <command>rwwrtwin</command> program runs on Windows 95, NT, 98, 2000, "
#~ "ME, XP and probably later versions. To use it you will need to unpack "
#~ "diskio.dll in the same directory."
#~ msgstr ""
#~ "Programmet <command>rwwrtwin</command> kører på Windows 95, NT, 98, 2000, "
#~ "ME, XP og sandsynligvis senere versioner. For at bruge programmet skal du "
#~ "udpakke diskio.dll i den samme mappe."

#~ msgid ""
#~ "These tools can be found on the Official &debian; CD-ROMs under the "
#~ "<filename>/tools</filename> directory."
#~ msgstr ""
#~ "Disse værktøjer kan findes på de officielle &debian;-cd-rom'er under "
#~ "mappen <filename>/tools</filename>."

#~ msgid "Writing Disk Images From MacOS"
#~ msgstr "Skrivning af diskaftryk fra MacOS"

#~ msgid ""
#~ "An AppleScript, <application>Make &debian; Floppy</application>, is "
#~ "available for burning floppies from the provided disk image files. It can "
#~ "be downloaded from <ulink url=\"ftp://ftp2.sourceforge.net/pub/"
#~ "sourceforge/d/de/debian-imac/MakeDebianFloppy.sit\"></ulink>. To use it, "
#~ "just unstuff it on your desktop, and then drag any floppy image file to "
#~ "it. You must have Applescript installed and enabled in your extensions "
#~ "manager. Disk Copy will ask you to confirm that you wish to erase the "
#~ "floppy and proceed to write the file image to it."
#~ msgstr ""
#~ "Et Applescript, <application>Make &debian; Floppy</application>, er "
#~ "tilgængelig for brænding af disketteaftryk fra de tilbudte "
#~ "diskaftryksfiler. Det kan hentes fra <ulink url=\"ftp://ftp2.sourceforge."
#~ "net/pub/sourceforge/d/de/debian-imac/MakeDebianFloppy.sit\"></ulink>. For "
#~ "at bruge det, så »unstuff« det på dit skrivebord, og træk så "
#~ "disketteaftryksfilen til det. Du skal have Applescript installeret og "
#~ "aktiveret i din udvidelseshåndtering. Disk Copy vil bede dig om at "
#~ "bekræfte, at du ønsker at slette disketten og fortsætte med at skrive "
#~ "filaftrykket."

#~ msgid ""
#~ "You can also use the MacOS utility <command>Disk Copy</command> directly, "
#~ "or the freeware utility <command>suntar</command>. The <filename>root."
#~ "bin</filename> file is an example of a floppy image. Use one of the "
#~ "following methods to create a floppy from the floppy image with these "
#~ "utilities."
#~ msgstr ""
#~ "Du kan også bruge MacOS-redskabet <command>Disk Copy</command> direkte, "
#~ "eller freeware-redskabet <command>suntar</command>. Filen <filename>root."
#~ "bin</filename> er et eksempel på et disketteaftryk. Brug en af de "
#~ "følgende metoder til at oprette en diskette fra disketteaftrykket med "
#~ "disse redskaber."

#~ msgid "Writing Disk Images with <command>Disk Copy</command>"
#~ msgstr "Skrivning af diskaftryk med <command>Disk Copy</command>"

#~ msgid ""
#~ "If you are creating the floppy image from files which were originally on "
#~ "the official &debian-gnu; CD, then the Type and Creator are already set "
#~ "correctly. The following <command>Creator-Changer</command> steps are "
#~ "only necessary if you downloaded the image files from a &debian; mirror."
#~ msgstr ""
#~ "Hvis du opretter diskaftrykket fra filer, som oprindelig befandt sig på "
#~ "den officielle &debian-gnu;-cd, så er Type og Creator allerede angivet "
#~ "korrekt. De følgende <command>Creator-Changer</command>-trin er kun "
#~ "nødvendige hvis du hentede aftryksfilerne fra et &debian;-spejl."

#~ msgid ""
#~ "Obtain <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</"
#~ "ulink> and use it to open the <filename>root.bin</filename> file."
#~ msgstr ""
#~ "Hent <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</ulink> "
#~ "og brug den til at åbne filen <filename>root.bin</filename>."

#~ msgid ""
#~ "Change the Creator to <userinput>ddsk</userinput> (Disk Copy), and the "
#~ "Type to <userinput>DDim</userinput> (binary floppy image). The case is "
#~ "sensitive for these fields."
#~ msgstr ""
#~ "Ændr Creator til <userinput>ddsk</userinput> (Disk Copy), og Type til "
#~ "<userinput>DDim</userinput> (binært disketteaftryk). Der er forskel på "
#~ "små og store bogstaver for disse felter."

#~ msgid ""
#~ "<emphasis>Important:</emphasis> In the Finder, use <userinput>Get Info</"
#~ "userinput> to display the Finder information about the floppy image, and "
#~ "<quote>X</quote> the <userinput>File Locked</userinput> check box so that "
#~ "MacOS will be unable to remove the boot blocks if the image is "
#~ "accidentally mounted."
#~ msgstr ""
#~ "<emphasis>Vigtigt:</emphasis> I Finder, brug <userinput>Get Info</"
#~ "userinput> for at vise Finder-informationen om disketteaftrykket, og "
#~ "afkryds <quote>X</quote> <userinput>File Locked</userinput>-"
#~ "afkrydsningsboksen så at MacOS ikke kan fjerne opstartsblokken hvis "
#~ "aftrykket ved en fejl monteres."

#~ msgid ""
#~ "Obtain <command>Disk Copy</command>; if you have a MacOS system or CD it "
#~ "will very likely be there already, otherwise try <ulink url=\"&url-"
#~ "powerpc-diskcopy;\"></ulink>."
#~ msgstr ""
#~ "Hent <command>Disk Copy</command>; hvis du har et MacOS-system eller cd "
#~ "så vil programmet højst sandsynlig allerede være installeret, ellers prøv "
#~ "<ulink url=\"&url-powerpc-diskcopy;\"></ulink>."

#~ msgid ""
#~ "Run <command>Disk Copy</command>, and select <menuchoice> "
#~ "<guimenu>Utilities</guimenu> <guimenuitem>Make a Floppy</guimenuitem> </"
#~ "menuchoice>, then select the <emphasis>locked</emphasis> image file from "
#~ "the resulting dialog. It will ask you to insert a floppy, then ask if you "
#~ "really want to erase it. When done it should eject the floppy."
#~ msgstr ""
#~ "Kør <command>Disk Copy</command>, og vælg <menuchoice> "
#~ "<guimenu>Utilities</guimenu> <guimenuitem>Make a Floppy</guimenuitem> </"
#~ "menuchoice>, vælg så den <emphasis>låste</emphasis> billedfil fra "
#~ "resultatdialogen. Den vil bede dig om at indsætte en diskette og om du er "
#~ "sikker på at du ønsker at slette den. Når færdig bør disketten blive "
#~ "skubbet ud."

#~ msgid "Writing Disk Images with <command>suntar</command>"
#~ msgstr "Skrivning af diskaftryk med <command>suntar</command>"

#~ msgid ""
#~ "Obtain <command>suntar</command> from <ulink url=\"&url-powerpc-suntar;"
#~ "\"> </ulink>. Start the <command>suntar</command> program and select "
#~ "<quote>Overwrite Sectors...</quote> from the <userinput>Special</"
#~ "userinput> menu."
#~ msgstr ""
#~ "Hent <command>suntar</command> fra <ulink url=\"&url-powerpc-suntar;\"> </"
#~ "ulink>. Start programmet <command>suntar</command> og vælg "
#~ "<quote>Overskriv sektorer ...</quote> fra menuen <userinput>Special</"
#~ "userinput>."

#~ msgid ""
#~ "Insert the floppy disk as requested, then hit &enterkey; (start at sector "
#~ "0)."
#~ msgstr ""
#~ "Indsæt diskettedisken som anmodt om og tryk på &enterkey; (start ved "
#~ "sektor 0)."

#~ msgid ""
#~ "Select the <filename>root.bin</filename> file in the file-opening dialog."
#~ msgstr "Vælg filen <filename>root.bin</filename> i filåbningsdialogen."

#~ msgid ""
#~ "After the floppy has been created successfully, select <menuchoice> "
#~ "<guimenu>File</guimenu> <guimenuitem>Eject</guimenuitem> </menuchoice>. "
#~ "If there are any errors writing the floppy, simply toss that floppy and "
#~ "try another."
#~ msgstr ""
#~ "Efter disketten er blevet oprettet vælges <menuchoice> <guimenu>Fil</"
#~ "guimenu> <guimenuitem>Skub ud</guimenuitem> </menuchoice>. Hvis der "
#~ "opstod fejl ved skrivning af disketten, så smid den ud og prøv på en "
#~ "anden."

#~ msgid ""
#~ "Before using the floppy you created, <emphasis>set the write protect tab</"
#~ "emphasis>! Otherwise if you accidentally mount it in MacOS, MacOS will "
#~ "helpfully ruin it."
#~ msgstr ""
#~ "Før du bruger disketten du oprettede, <emphasis>så husk at slå "
#~ "skrivebeskyttelsen til</emphasis>! Ellers vil MacOS, hvis du ved en "
#~ "fejltagelse monterer den, gøre disketten ubrugelig til sit formål."

#~ msgid "Hard Disk Installer Booting for OldWorld Macs"
#~ msgstr "Harddiskinstallation med opstart fra OldWorld Macs"

#~ msgid ""
#~ "The <filename>boot-floppy-hfs</filename> floppy uses <application>miBoot</"
#~ "application> to launch Linux installation, but <application>miBoot</"
#~ "application> cannot easily be used for hard disk booting. "
#~ "<application>BootX</application>, launched from MacOS, supports booting "
#~ "from files placed on the hard disk. <application>BootX</application> can "
#~ "also be used to dual-boot MacOS and Linux after your &debian; "
#~ "installation is complete. For the Performa 6360, it appears that "
#~ "<command>quik</command> cannot make the hard disk bootable. So "
#~ "<application>BootX</application> is required on that model."
#~ msgstr ""
#~ "Disketten <filename>boot-floppy-hfs</filename> bruger "
#~ "<application>miBoot</application> til at starte Linux-installation, men "
#~ "<application>miBoot</application> kan ikke nemt bruges for "
#~ "harddiskopstart. <application>BootX</application>, startet fra MacOS, "
#~ "understøtter opstart fra filer placeret på harddisken. "
#~ "<application>BootX</application> kan også bruges til dual-boot af MacOS "
#~ "og Linux efter din &debian;-installation er færdig. For Performa 6360 "
#~ "virker det som om, at <command>quik</command> ikke kan gøre harddisken "
#~ "opstartbar. Så <application>BootX</application> er krævet på den model."

#~ msgid ""
#~ "Download and unstuff the <application>BootX</application> distribution, "
#~ "available from <ulink url=\"&url-powerpc-bootx;\"></ulink>, or in the "
#~ "<filename>dists/woody/main/disks-powerpc/current/powermac</filename> "
#~ "directory on &debian; http/ftp mirrors and official &debian; CDs. Use "
#~ "<application>Stuffit Expander</application> to extract it from its "
#~ "archive. Within the package, there is an empty folder called "
#~ "<filename>Linux Kernels</filename>. Download <filename>linux.bin</"
#~ "filename> and <filename>ramdisk.image.gz</filename> from the "
#~ "<filename>disks-powerpc/current/powermac</filename> folder, and place "
#~ "them in the <filename>Linux Kernels</filename> folder. Then place the "
#~ "<filename>Linux Kernels</filename> folder in the active System Folder."
#~ msgstr ""
#~ "Hent og pak <application>BootX</application>-distributionen ud, som er "
#~ "tilgængelig fra <ulink url=\"&url-powerpc-bootx;\"></ulink>, eller i "
#~ "mappen <filename>dists/woody/main/disks-powerpc/current/powermac</"
#~ "filename>på &debian; http/ftp-spejl og officielle &debian;-cd'er. Brug "
#~ "<application>Stuffit Expander</application> til at udtrække den fra dens "
#~ "arkiv. Inden i pakken er der en tom mappe kaldt <filename>Linux Kernels</"
#~ "filename>. Hent <filename>linux.bin</filename> og <filename>ramdisk.image."
#~ "gz</filename> fra mappen <filename>disks-powerpc/current/powermac</"
#~ "filename> og placer dem i mappen <filename>Linux Kernels</filename>. "
#~ "Placer så mappen <filename>Linux Kernels</filename> i den aktive "
#~ "systemmappe."

#~ msgid "Hard Disk Installer Booting for NewWorld Macs"
#~ msgstr "Harddiskinstallation med opstart fra NewWorld Macs"

#~ msgid ""
#~ "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, "
#~ "as well as loading ELF binaries directly from the hard disk. These "
#~ "machines will boot Linux directly via <command>yaboot</command>, which "
#~ "supports loading a kernel and RAMdisk directly from an ext2 partition, as "
#~ "well as dual-booting with MacOS. Hard disk booting of the installer is "
#~ "particularly appropriate for newer machines without floppy drives. "
#~ "<command>BootX</command> is not supported and must not be used on "
#~ "NewWorld PowerMacs."
#~ msgstr ""
#~ "NewWorld PowerMacs understøtter opstart fra et netværk eller en ISO9660-"
#~ "cd-rom, samt indlæsning af ELF's binære filer direkte fra harddisken. "
#~ "Disse maskiner vil starte Linux direkte via <command>yaboot</command>, "
#~ "som understøtter indlæsning af en kerne og RAMdisk direkte fra en ext2-"
#~ "partition, samt som dual-booting med MacOS. Harddiskopstart af "
#~ "installationsprogrammet er specielt passende for nyere maskiner uden "
#~ "diskettedrev. <command>BootX</command> er ikke understøttet og må ikke "
#~ "bruges på NewWorld PowerMacs."

#~ msgid ""
#~ "<emphasis>Copy</emphasis> (not move) the following four files which you "
#~ "downloaded earlier from the &debian; archives, onto the root level of "
#~ "your hard drive (this can be accomplished by <keycap>option</keycap>-"
#~ "dragging each file to the hard drive icon)."
#~ msgstr ""
#~ "<emphasis>Kopier</emphasis> (flyt ikke) de følgende fire filer, som du "
#~ "hentede fra &debian;-arkiverne, til rodniveauet for din harddisk (dette "
#~ "kan opnås ved <keycap>option</keycap>-trækning af hver fil til "
#~ "harddiskikonet)."