# Debian Installer master translation file template # Don't forget to properly fill-in the header of PO files # Debian Installer translators, please read the D-I i18n documentation # in doc/i18n/i18n.txt # , fuzzy # <>, 2006. # # msgid "" msgstr "" "Project-Id-Version: debian-installer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: \n" "PO-Revision-Date: 2006-11-26 05:25+0500\n" "Last-Translator: TAHIR RAUF \n" "Language-Team: \n" "Language: ur\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. Type: error #. Description #. :sl2: #: ../main-menu.templates:3001 #, fuzzy msgid "Installation step failed" msgstr "انسٹالیشن سٹپ فیل" #. Type: error #. Description #. :sl2: #: ../main-menu.templates:3001 msgid "" "An installation step failed. You can try to run the failing item again from " "the menu, or skip it and choose something else. The failing step is: ${ITEM}" msgstr "" #. Type: select #. Description #. :sl2: #: ../main-menu.templates:4001 #, fuzzy msgid "Choose an installation step:" msgstr "انسٹالیشن سٹپ فیل" #. Type: select #. Description #. :sl2: #: ../main-menu.templates:4001 msgid "" "This installation step depends on one or more other steps that have not yet " "been performed." msgstr "" #. Type: note #. Description #. :sl2: #. Type: text #. Description #. :sl2: #: ../di-utils-shell.templates:1001 ../di-utils.templates:5001 #, fuzzy msgid "Interactive shell" msgstr "شیل کو چلاؤ" #. Type: note #. Description #. :sl2: #: ../di-utils-shell.templates:1001 msgid "After this message, you will be running \"ash\", a Bourne-shell clone." msgstr "" #. Type: note #. Description #. :sl2: #: ../di-utils-shell.templates:1001 msgid "" "The root file system is a RAM disk. The hard disk file systems are mounted " "on \"/target\". The editor available to you is nano. It's very small and " "easy to figure out. To get an idea of what Unix utilities are available to " "you, use the \"help\" command." msgstr "" #. Type: note #. Description #. :sl2: #: ../di-utils-shell.templates:1001 #, fuzzy msgid "Use the \"exit\" command to return to the installation menu." msgstr "کیا ٓاپ پارٹیشن مینو میں واپس جانا چاھتے ھیں؟" #. Type: text #. Description #. Main menu item #. The translation should not exceed 55 columns except for languages #. that are only supported in the graphical version of the installer #. :sl2: #: ../di-utils-exit-installer.templates:1001 #, fuzzy msgid "Exit installer" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: boolean #. Description #. :sl2: #: ../di-utils-reboot.templates:1001 #, fuzzy msgid "Are you sure you want to exit now?" msgstr "کیا ٓاپ واقعی ابھی ختم کرنا چاھتے ھیں" #. Type: boolean #. Description #. :sl2: #: ../di-utils-reboot.templates:1001 msgid "" "If you have not finished the install, your system may be left in an unusable " "state." msgstr "" #. Type: error #. Description #. :sl2: #: ../di-utils.templates:6001 msgid "Terminal plugin not available" msgstr "" #. Type: error #. Description #. :sl2: #: ../di-utils.templates:6001 msgid "" "This build of the debian-installer requires the terminal plugin in order to " "display a shell. Unfortunately, this plugin is currently unavailable." msgstr "" #. Type: error #. Description #. :sl2: #: ../di-utils.templates:6001 msgid "" "It should be available after reaching the \"Loading additional components\" " "installation step." msgstr "" #. Type: text #. Description #. :sl2: #: ../di-utils.templates:7001 msgid "" "Alternatively, you can open a shell by pressing Ctrl+Alt+F2. Use Alt+F5 to " "get back to the installer." msgstr "" #. Type: multiselect #. Description #. :sl2: #. Type: multiselect #. Description #. :sl2: #: ../anna.templates:1001 ../anna.templates:2001 #, fuzzy msgid "Installer components to load:" msgstr "انسٹالر کمپونینٹس کو CDسے لوڈ کرو" #. Type: multiselect #. Description #. :sl2: #: ../anna.templates:1001 msgid "" "All components of the installer needed to complete the install will be " "loaded automatically and are not listed here. Some other (optional) " "installer components are shown below. They are probably not necessary, but " "may be interesting to some users." msgstr "" #. Type: multiselect #. Description #. :sl2: #. Type: multiselect #. Description #. :sl2: #: ../anna.templates:1001 ../anna.templates:2001 msgid "" "Note that if you select a component that requires others, those components " "will also be loaded." msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../anna.templates:2001 msgid "" "To save memory, only components that are certainly needed for an install are " "selected by default. The other installer components are not all necessary " "for a basic install, but you may need some of them, especially certain " "kernel modules, so look through the list carefully and select the components " "you need." msgstr "" #. Type: error #. Description #. :sl2: #: ../anna.templates:7001 #, fuzzy msgid "Failed to load installer component" msgstr " انسٹالر کے کمپونینٹس ڈاؤن لوڈ" #. Type: error #. Description #. :sl2: #: ../anna.templates:7001 msgid "Loading ${PACKAGE} failed for unknown reasons. Aborting." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../anna.templates:8001 #, fuzzy msgid "Continue the install without loading kernel modules?" msgstr "پارٹیشنگ کے ساتھ جاری رکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../anna.templates:8001 msgid "" "No kernel modules were found. This probably is due to a mismatch between the " "kernel used by this version of the installer and the kernel version " "available in the archive." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../anna.templates:8001 msgid "" "If you're installing from a mirror, you can work around this problem by " "choosing to install a different version of Debian. The install will probably " "fail to work if you continue without kernel modules." msgstr "" #. Type: select #. Description #. :sl2: #: ../localechooser.templates-in:4001 #, fuzzy msgid "System locale:" msgstr "زبان کا انتکاب کریں" #. Type: select #. Description #. :sl2: #: ../localechooser.templates-in:4001 #, fuzzy msgid "Select the default locale for the installed system." msgstr "پلیز اس سسٹم کیلے ھوسٹ کا نام لکھیں۔" #. Type: multiselect #. Description #. :sl2: #: ../localechooser.templates-in:32001 msgid "Additional locales:" msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../localechooser.templates-in:32001 msgid "" "Based on your previous choices, the default locale currently selected for " "the installed system is '${LOCALE}'." msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../localechooser.templates-in:32001 msgid "" "If you wish to use a different default or to also have other locales " "available, you may choose additional locales to be installed. If you are " "unsure it is best to just use the selected default." msgstr "" #. Type: note #. Description #. :sl2: #: ../localechooser.templates-in:34001 #, fuzzy msgid "locale" msgstr "لوجیکل" #. Type: note #. Description #. :sl2: #: ../localechooser.templates-in:34001 msgid "" "A locale determines character encoding and contains information on for " "example currency, date format and alphabetical sort order." msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:4001 #, fuzzy msgid "Keyboard model:" msgstr "کیبورڈ کا لےٓاوٹ منتخب کریں" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:4001 #, fuzzy msgid "Please select the model of the keyboard of this machine." msgstr "پلیز اس سسٹم کیلے ھوسٹ کا نام لکھیں۔" #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:12001 msgid "No temporary switch" msgstr "" #. Type: select #. Choices #. :sl2: #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:12001 #: ../keyboard-configuration.templates:13001 msgid "Both Logo keys" msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:12002 msgid "Method for temporarily toggling between national and Latin input:" msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:12002 msgid "" "When the keyboard is in national mode and one wants to type only a few Latin " "letters, it might be more appropriate to switch temporarily to Latin mode. " "The keyboard remains in that mode as long as the chosen key is kept pressed. " "That key may also be used to input national letters when the keyboard is in " "Latin mode." msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:12002 msgid "You can disable this feature by choosing \"No temporary switch\"." msgstr "" #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:13001 #, fuzzy msgid "The default for the keyboard layout" msgstr "کیبورڈ کا لےٓاوٹ منتخب کریں" #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:13001 msgid "No AltGr key" msgstr "" #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:13001 msgid "Keypad Enter key" msgstr "" #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:13001 msgid "Both Alt keys" msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:13002 msgid "Key to function as AltGr:" msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:13002 msgid "" "With some keyboard layouts, AltGr is a modifier key used to input some " "characters, primarily ones that are unusual for the language of the keyboard " "layout, such as foreign currency symbols and accented letters. These are " "often printed as an extra symbol on keys." msgstr "" #. Type: select #. Choices #. :sl2: #: ../keyboard-configuration.templates:14001 msgid "No compose key" msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:14002 #, fuzzy msgid "Compose key:" msgstr "ڈیوایس فایلیں بناتے ہوے" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:14002 msgid "" "The Compose key (known also as Multi_key) causes the computer to interpret " "the next few keystrokes as a combination in order to produce a character not " "found on the keyboard." msgstr "" #. Type: select #. Description #. :sl2: #: ../keyboard-configuration.templates:14002 msgid "" "On the text console the Compose key does not work in Unicode mode. If not in " "Unicode mode, regardless of what you choose here, you can always also use " "the Control+period combination as a Compose key." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:1001 #, fuzzy msgid "Load CD-ROM drivers from removable media?" msgstr "باقی رہ گی ڈرایوز کو فلاپی ڈرایور سے لوڈ کرو؟" #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:1001 ../cdrom-detect.templates:3001 msgid "No common CD-ROM drive was detected." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:1001 msgid "" "You may need to load additional CD-ROM drivers from removable media, such as " "a driver floppy. If you have such media available now, insert it, and " "continue. Otherwise, you will be given the option to manually select CD-ROM " "modules." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:3001 msgid "Manually select a CD-ROM module and device?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:3001 msgid "" "Your CD-ROM drive may be an old Mitsumi or another non-IDE, non-SCSI CD-ROM " "drive. In that case you should choose which module to load and the device to " "use. If you don't know which module and device are needed, look for some " "documentation or try a network installation instead of a CD-ROM installation." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:4001 #, fuzzy msgid "Retry mounting the CD-ROM?" msgstr "CD-ROM کو دوبارہ ماؤنٹ کرنے کی کوشش کریں؟" #. Type: boolean #. Description #. :sl2: #: ../cdrom-detect.templates:4001 msgid "" "Your installation CD-ROM couldn't be mounted. This probably means that the " "CD-ROM was not in the drive. If so you can insert it and try again." msgstr "" #. Type: select #. Description #. :sl2: #: ../cdrom-detect.templates:5001 msgid "Module needed for accessing the CD-ROM:" msgstr "" #. Type: select #. Description #. :sl2: #: ../cdrom-detect.templates:5001 msgid "" "The automatic detection didn't find a CD-ROM drive. You can try to load a " "specific module if you have an unusual CD-ROM drive (that is neither IDE nor " "SCSI)." msgstr "" #. Type: string #. Description #. :sl2: #: ../cdrom-detect.templates:6001 msgid "Device file for accessing the CD-ROM:" msgstr "" #. Type: string #. Description #. :sl2: #: ../cdrom-detect.templates:6001 msgid "" "In order to access your CD-ROM drive, please enter the device file that " "should be used. Non-standard CD-ROM drives use non-standard device files " "(such as /dev/mcdx)." msgstr "" #. Type: string #. Description #. :sl2: #: ../cdrom-detect.templates:6001 msgid "" "You may switch to the shell on the second terminal (ALT+F2) to check the " "available devices in /dev with \"ls /dev\". You can return to this screen by " "pressing ALT+F1." msgstr "" #. Type: note #. Description #. :sl2: #: ../cdrom-detect.templates:12001 msgid "CD-ROM detected" msgstr "" #. Type: note #. Description #. :sl2: #: ../cdrom-detect.templates:12001 msgid "" "The CD-ROM autodetection was successful. A CD-ROM drive has been found and " "it currently contains the CD ${cdname}. The installation will now continue." msgstr "" #. Type: error #. Description #. :sl2: #: ../cdrom-detect.templates:14001 msgid "Incorrect CD-ROM detected" msgstr "" #. Type: error #. Description #. :sl2: #: ../cdrom-detect.templates:14001 msgid "The CD-ROM drive contains a CD which cannot be used for installation." msgstr "" #. Type: error #. Description #. :sl2: #: ../cdrom-detect.templates:14001 #, fuzzy msgid "Please insert a suitable CD to continue with the installation." msgstr "پلیز انسٹالیشن کو جاری رکھنے کیلے صحیح CDڈالیں۔" #. Type: error #. Description #. Translators: DO NOT TRANSLATE "Release". This is the name of a file. #. :sl2: #: ../cdrom-detect.templates:15001 #, fuzzy msgid "Error reading Release file" msgstr "ریلیز فایل کو ڈاؤن لوڈ کر رہا ھے" #. Type: error #. Description #. Translators: DO NOT TRANSLATE "Release". This is the name of a file. #. :sl2: #: ../cdrom-detect.templates:15001 msgid "" "The CD-ROM does not seem to contain a valid 'Release' file, or that file " "could not be read correctly." msgstr "" #. Type: error #. Description #. Translators: DO NOT TRANSLATE "Release". This is the name of a file. #. :sl2: #: ../cdrom-detect.templates:15001 msgid "" "You may try to repeat CD-ROM detection but, even if it does succeed the " "second time, you may experience problems later in the installation." msgstr "" #. Type: text #. Description #. Item in the main menu to select this package #. :sl2: #: ../cdrom-detect.templates:20001 #, fuzzy msgid "Detect and mount CD-ROM" msgstr "CD-ROM کو دوبارہ ماؤنٹ کرنے کی کوشش کریں؟" #. Type: select #. Choices #. :sl2: #: ../ethdetect.templates:1001 msgid "no ethernet card" msgstr "" #. Type: select #. Choices #. :sl2: #. "none of the above" should be understood as "none of the above choices" #: ../ethdetect.templates:1001 ../disk-detect.templates:3001 msgid "none of the above" msgstr "" #. Type: select #. Description #. :sl2: #: ../ethdetect.templates:1002 msgid "Driver needed by your Ethernet card:" msgstr "" #. Type: select #. Description #. :sl2: #: ../ethdetect.templates:1002 msgid "" "No Ethernet card was detected. If you know the name of the driver needed by " "your Ethernet card, you can select it from the list." msgstr "" #. Type: error #. Description #. :sl2: #: ../ethdetect.templates:3001 msgid "Ethernet card not found" msgstr "" #. Type: error #. Description #. :sl2: #: ../ethdetect.templates:3001 msgid "No Ethernet card was found on the system." msgstr "" #. Type: select #. Choices #. :sl2: #: ../disk-detect.templates:3001 #, fuzzy msgid "continue with no disk drive" msgstr "ڈیفالٹ روٹ کے ساتھ جاری رکھوں؟" #. Type: select #. Description #. :sl2: #: ../disk-detect.templates:3002 msgid "Driver needed for your disk drive:" msgstr "" #. Type: select #. Description #. :sl2: #: ../disk-detect.templates:3002 msgid "" "No disk drive was detected. If you know the name of the driver needed by " "your disk drive, you can select it from the list." msgstr "" #. Type: error #. Description #. :sl2: #: ../disk-detect.templates:4001 #, fuzzy msgid "No partitionable media" msgstr "کوءی پارٹیشنابل میڈیا نہیں ھے" #. Type: error #. Description #. :sl2: #: ../disk-detect.templates:4001 #, fuzzy msgid "No partitionable media were found." msgstr "کوءی پارٹیشنابل میڈیا نہیں ملا ھے" #. Type: error #. Description #. :sl2: #: ../disk-detect.templates:4001 msgid "Please check that a hard disk is attached to this machine." msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../hw-detect.templates:5001 msgid "Modules to load:" msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../hw-detect.templates:5001 msgid "" "The following Linux kernel modules were detected as matching your hardware. " "If you know some are unnecessary, or cause problems, you can choose not to " "load them. If you're unsure, you should leave them all selected." msgstr "" #. Type: boolean #. Description #. FIXME: not in use and kept just while we're still in doubt it will #. be needed #. :sl2: #: ../hw-detect.templates:6001 #, fuzzy msgid "Start PC card services?" msgstr "PCکارڈ سروسز کو سٹارٹ کر رھا ھے..." #. Type: boolean #. Description #. FIXME: not in use and kept just while we're still in doubt it will #. be needed #. :sl2: #: ../hw-detect.templates:6001 msgid "" "Please choose whether PC card services should be started in order to allow " "the use of PCMCIA cards." msgstr "" #. Type: string #. Description #. :sl2: #: ../hw-detect.templates:7001 msgid "PCMCIA resource range options:" msgstr "" #. Type: string #. Description #. :sl2: #: ../hw-detect.templates:7001 msgid "" "Some PCMCIA hardware needs special resource configuration options in order " "to work, and can cause the computer to freeze otherwise. For example, some " "Dell laptops need \"exclude port 0x800-0x8ff\" to be specified here. These " "options will be added to /etc/pcmcia/config.opts. See the installation " "manual or the PCMCIA HOWTO for more information." msgstr "" #. Type: string #. Description #. :sl2: #: ../hw-detect.templates:7001 msgid "For most hardware, you do not need to specify anything here." msgstr "" #. Type: error #. Description #. :sl2: #: ../hw-detect.templates:9001 msgid "Error while running '${CMD_LINE_PARAM}'" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../hw-detect.templates:10001 #, fuzzy msgid "Load missing drivers from removable media?" msgstr "باقی رہ گی ڈرایوز کو فلاپی ڈرایور سے لوڈ کرو؟" #. Type: boolean #. Description #. :sl2: #: ../hw-detect.templates:10001 msgid "" "A driver for your hardware is not available. You may need to load drivers " "from removable media, such as a USB stick, or driver floppy." msgstr "" #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../hw-detect.templates:10001 ../hw-detect.templates:11001 msgid "If you have such media available now, insert it, and continue." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../hw-detect.templates:11001 #, fuzzy msgid "Load missing firmware from removable media?" msgstr "باقی رہ گی ڈرایوز کو فلاپی ڈرایور سے لوڈ کرو؟" #. Type: boolean #. Description #. :sl2: #: ../hw-detect.templates:11001 msgid "" "Some of your hardware needs non-free firmware files to operate. The firmware " "can be loaded from removable media, such as a USB stick or floppy." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../hw-detect.templates:11001 msgid "The missing firmware files are: ${FILES}" msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:6001 msgid "" "${iface} is a wireless network interface. Please enter the name (the ESSID) " "of the wireless network you would like ${iface} to use. If you would like to " "use any available network, leave this field blank." msgstr "" #. Type: select #. Description #. :sl2: #: ../netcfg-common.templates:8002 #, fuzzy msgid "Wireless network type for ${iface}:" msgstr "${iface}کیلے بغیر تار والا ESSID" #. Type: select #. Description #. :sl2: #: ../netcfg-common.templates:8002 msgid "" "Choose WEP/Open if the network is open or secured with WEP. Choose WPA/WPA2 " "if the network is protected with WPA/WPA2 PSK (Pre-Shared Key)." msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:9001 msgid "WEP key for wireless device ${iface}:" msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:9001 msgid "" "If applicable, please enter the WEP security key for the wireless device " "${iface}. There are two ways to do this:" msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:9001 msgid "" "If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', " "or 'nnnnnnnn', where n is a number, just enter it as it is into this field." msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:9001 msgid "" "If your WEP key is in the format of a passphrase, prefix it with " "'s:' (without quotes)." msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:9001 msgid "" "Of course, if there is no WEP key for your wireless network, leave this " "field blank." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:10001 #, fuzzy msgid "Invalid WEP key" msgstr "غلط سایز" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:10001 msgid "" "The WEP key '${wepkey}' is invalid. Please refer to the instructions on the " "next screen carefully on how to enter your WEP key correctly, and try again." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:11001 #, fuzzy msgid "Invalid passphrase" msgstr "غلط سایز" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:11001 msgid "" "The WPA/WPA2 PSK passphrase was either too long (more than 64 characters) or " "too short (less than 8 characters)." msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:12001 msgid "WPA/WPA2 passphrase for wireless device ${iface}:" msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-common.templates:12001 msgid "" "Enter the passphrase for WPA/WPA2 PSK authentication. This should be the " "passphrase defined for the wireless network you are trying to use." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:13001 #, fuzzy msgid "Invalid ESSID" msgstr "غلط سایز" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:13001 msgid "" "The ESSID \"${essid}\" is invalid. ESSIDs may only be up to ${max_essid_len} " "characters, but may contain all kinds of characters." msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:14001 msgid "Attempting to exchange keys with the access point..." msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:16001 msgid "WPA/WPA2 connection succeeded" msgstr "" #. Type: note #. Description #. :sl2: #: ../netcfg-common.templates:17001 msgid "Failure of key exchange and association" msgstr "" #. Type: note #. Description #. :sl2: #: ../netcfg-common.templates:17001 msgid "" "The exchange of keys and association with the access point failed. Please " "check the WPA/WPA2 parameters you provided." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:20001 #, fuzzy msgid "Invalid hostname" msgstr "غلط سایز" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:20001 #, fuzzy msgid "The name \"${hostname}\" is invalid." msgstr "دیا گیا گیٹوے اڈریس نا قابل رسای ھے" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:20001 msgid "" "A valid hostname may contain only the numbers 0-9, upper and lowercase " "letters (A-Z and a-z), and the minus sign. It must be at most " "${maxhostnamelen} characters long, and may not begin or end with a minus " "sign." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:21001 msgid "Error" msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:21001 msgid "" "An error occurred and the network configuration process has been aborted. " "You may retry it from the installation main menu." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:22001 #, fuzzy msgid "No network interfaces detected" msgstr "کویی نیٹورک انٹرفیس ڈیٹکٹ نہیں ھوا" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:22001 msgid "" "No network interfaces were found. The installation system was unable to find " "a network device." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-common.templates:22001 msgid "" "You may need to load a specific module for your network card, if you have " "one. For this, go back to the network hardware detection step." msgstr "" #. Type: note #. Description #. A "kill switch" is a physical switch found on some network cards that #. disables the card. #. :sl2: #: ../netcfg-common.templates:23001 msgid "Kill switch enabled on ${iface}" msgstr "" #. Type: note #. Description #. A "kill switch" is a physical switch found on some network cards that #. disables the card. #. :sl2: #: ../netcfg-common.templates:23001 msgid "" "${iface} appears to have been disabled by means of a physical \"kill switch" "\". If you intend to use this interface, please switch it on before " "continuing." msgstr "" #. Type: select #. Choices #. :sl2: #. Note to translators : Please keep your translations of each choice #. below the 65 columns limit (which means 65 characters for most languages) #. Choices MUST be separated by commas #. You MUST use standard commas not special commas for your language #. You MUST NOT use commas inside choices #: ../netcfg-common.templates:24001 msgid "Infrastructure (Managed) network" msgstr "" #. Type: select #. Choices #. :sl2: #. Note to translators : Please keep your translations of each choice #. below the 65 columns limit (which means 65 characters for most languages) #. Choices MUST be separated by commas #. You MUST use standard commas not special commas for your language #. You MUST NOT use commas inside choices #: ../netcfg-common.templates:24001 msgid "Ad-hoc network (Peer to peer)" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:25001 msgid "Wireless network configuration" msgstr "بغیر تار والے نیٹورک کی کنفیگریشن" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:26001 msgid "Searching for wireless access points..." msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:30001 msgid "" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:31001 msgid "Wireless ethernet (802.11x)" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:32001 msgid "wireless" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:33001 #, fuzzy msgid "Ethernet" msgstr "علاوھ ازیں" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:34001 msgid "Token Ring" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:35001 msgid "USB net" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:37001 msgid "Serial-line IP" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:38001 msgid "Parallel-port IP" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:39001 msgid "Point-to-Point Protocol" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:40001 msgid "IPv6-in-IPv4" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:41001 msgid "ISDN Point-to-Point Protocol" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:42001 msgid "Channel-to-channel" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:43001 msgid "Real channel-to-channel" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:45001 msgid "Inter-user communication vehicle" msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-common.templates:46001 msgid "Unknown interface" msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-dhcp.templates:5001 #, fuzzy msgid "No DHCP client found" msgstr "کویی DHCPکلاینٹ نہیں ملا" #. Type: error #. Description #. :sl2: #: ../netcfg-dhcp.templates:5001 msgid "No DHCP client was found. This package requires pump or dhcp-client." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-dhcp.templates:5001 #, fuzzy msgid "The DHCP configuration process has been aborted." msgstr "ریسایز کے ٓاپریشن کو ختم کر دیا گیا ھے۔" #. Type: boolean #. Description #. :sl2: #: ../netcfg-dhcp.templates:8001 #, fuzzy msgid "Continue without a default route?" msgstr "ڈیفالٹ روٹ کے ساتھ جاری رکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../netcfg-dhcp.templates:8001 msgid "" "The network autoconfiguration was successful. However, no default route was " "set: the system does not know how to communicate with hosts on the Internet. " "This will make it impossible to continue with the installation unless you " "have the first installation CD-ROM, a 'Netinst' CD-ROM, or packages " "available on the local network." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../netcfg-dhcp.templates:8001 msgid "" "If you are unsure, you should not continue without a default route: contact " "your local network administrator about this problem." msgstr "" #. Type: text #. Description #. IPv6 #. :sl2: #. Type: text #. Description #. IPv6 #. :sl2: #: ../netcfg-dhcp.templates:12001 ../netcfg-dhcp.templates:14001 #, fuzzy msgid "Attempting IPv6 autoconfiguration..." msgstr "بغیر تار والے نیٹورک کی کنفیگریشن" #. Type: text #. Description #. IPv6 #. :sl2: #: ../netcfg-dhcp.templates:13001 msgid "Waiting for link-local address..." msgstr "" #. Type: text #. Description #. :sl2: #: ../netcfg-dhcp.templates:16001 #, fuzzy #| msgid "Configure the network" msgid "Configuring the network with DHCPv6" msgstr "نیٹورک کو کنفیگر کرو" #. Type: error #. Description #. IPv6 #. :sl2: #: ../netcfg-static.templates:2001 msgid "Malformed IP address" msgstr "" #. Type: error #. Description #. IPv6 #. :sl2: #: ../netcfg-static.templates:2001 msgid "" "The IP address you provided is malformed. It should be in the form x.x.x.x " "where each 'x' is no larger than 255 (an IPv4 address), or a sequence of " "blocks of hexadecimal digits separated by colons (an IPv6 address). Please " "try again." msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-static.templates:3001 msgid "Point-to-point address:" msgstr "" #. Type: string #. Description #. :sl2: #: ../netcfg-static.templates:3001 msgid "" "The point-to-point address is used to determine the other endpoint of the " "point to point network. Consult your network administrator if you do not " "know the value. The point-to-point address should be entered as four " "numbers separated by periods." msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-static.templates:6001 msgid "Unreachable gateway" msgstr "" #. Type: error #. Description #. :sl2: #: ../netcfg-static.templates:6001 #, fuzzy msgid "The gateway address you entered is unreachable." msgstr "دیا گیا گیٹوے اڈریس نا قابل رسای ھے" #. Type: error #. Description #. :sl2: #: ../netcfg-static.templates:6001 msgid "" "You may have made an error entering your IP address, netmask and/or gateway." msgstr "" #. Type: select #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:3001 msgid "Debian version to install:" msgstr "" #. Type: select #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:3001 msgid "" "Debian comes in several flavors. Stable is well-tested and rarely changes. " "Unstable is untested and frequently changing. Testing is a middle ground, " "that receives many of the new versions from unstable if they are not too " "buggy." msgstr "" #. Type: select #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:3001 msgid "Only flavors available on the selected mirror are listed." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:7001 msgid "Go back and try a different mirror?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:7001 msgid "" "The specified (default) Debian version (${RELEASE}) is not available from " "the selected mirror. It is possible to continue and select a different " "release for your installation, but normally you should go back and select a " "different mirror that does support the correct version." msgstr "" #. Type: error #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:8001 msgid "Bad archive mirror" msgstr "" #. Type: error #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:8001 msgid "" "An error has been detected while trying to use the specified Debian archive " "mirror." msgstr "" #. Type: error #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:8001 msgid "" "Possible reasons for the error are: incorrect mirror specified; mirror is " "not available (possibly due to an unreliable network connection); mirror is " "broken (for example because an invalid Release file was found); mirror does " "not support the correct Debian version." msgstr "" #. Type: error #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:8001 msgid "" "Additional details may be available in /var/log/syslog or on virtual console " "4." msgstr "" #. Type: error #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:8001 msgid "Please check the specified mirror or try a different one." msgstr "" #. Type: text #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:10001 #, fuzzy msgid "oldstable" msgstr "ناقابل استعمال" #. Type: text #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:11001 #, fuzzy msgid "stable" msgstr "ناقابل استعمال" #. Type: text #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:12001 msgid "testing" msgstr "" #. Type: text #. Description #. :sl2: #: ../choose-mirror-bin.templates-in:13001 #, fuzzy msgid "unstable" msgstr "ناقابل استعمال" #. Type: string #. Description #. :sl2: #: ../choose-mirror-bin.templates.http-in:5001 #: ../choose-mirror-bin.templates.ftp.base-in:3001 msgid "Debian archive mirror directory:" msgstr "" #. Type: string #. Description #. :sl2: #: ../choose-mirror-bin.templates.http-in:5001 #: ../choose-mirror-bin.templates.ftp.base-in:3001 msgid "" "Please enter the directory in which the mirror of the Debian archive is " "located." msgstr "" #. Type: string #. Description #. :sl2: #: ../choose-mirror-bin.templates.ftp.base-in:4001 #, fuzzy msgid "FTP proxy information (blank for none):" msgstr "HTTPپروکسی کی معلومات (کچھ نھیں کیلے خالی)" #. Type: string #. Description #. :sl2: #: ../choose-mirror-bin.templates.ftp.base-in:4001 msgid "" "If you need to use a FTP proxy to access the outside world, enter the proxy " "information here. Otherwise, leave this blank." msgstr "" #. Type: select #. Default #. Translators, you should put here the ISO 3166 code of a country #. which you know hosts at least one Debian FTP mirror. Please check #. that the country really has a Debian FTP mirror before putting a #. random value here #. #. First check that the country you mention here is listed in #. http://svn.debian.org/wsvn/webwml/trunk/webwml/english/mirror/Mirrors.masterlist #. #. BE CAREFUL to use the TWO LETTER ISO-3166 CODE and not anything else #. #. You do not need to translate what's between the square brackets #. You should even NOT put square brackets in translations: #. msgid "US[ Default value for ftp]" #. msgstr "FR" #. :sl2: #: ../choose-mirror-bin.templates.ftp.sel-in:2002 msgid "US[ Default value for ftp]" msgstr "" #. Type: select #. Description #. :sl2: #: ../choose-mirror-bin.templates.both-in:2001 #, fuzzy msgid "Protocol for file downloads:" msgstr "فایل ڈاؤن لوڈ کیلے پروٹوکال:" #. Type: select #. Description #. :sl2: #: ../choose-mirror-bin.templates.both-in:2001 msgid "" "Please select the protocol to be used for downloading files. If unsure, " "select \"http\"; it is less prone to problems involving firewalls." msgstr "" #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: select #. Choices #. These are choices of actions so this is, at least in English, #. an infinitive form #. :sl2: #. #-#-#-#-# templates.pot (apt-setup) #-#-#-#-# #. Type: select #. Choices #. :sl2: #. These are choices of actions so this is, at least in English, #. an infinitive form #: ../net-retriever.templates:1001 ../apt-setup-udeb.templates:8001 #: ../apt-mirror-setup.templates:4001 msgid "Retry" msgstr "" #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: select #. Choices #. These are choices of actions so this is, at least in English, #. an infinitive form #. :sl2: #. #-#-#-#-# templates.pot (apt-setup) #-#-#-#-# #. Type: select #. Choices #. :sl2: #. These are choices of actions so this is, at least in English, #. an infinitive form #: ../net-retriever.templates:1001 ../apt-mirror-setup.templates:4001 msgid "Change mirror" msgstr "" #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: select #. Description #. :sl2: #. #-#-#-#-# templates.pot (apt-setup) #-#-#-#-# #. Type: select #. Description #: ../net-retriever.templates:1002 ../apt-mirror-setup.templates:4002 #, fuzzy msgid "Downloading a file failed:" msgstr "ریلیز فایل کو ڈاؤن لوڈ کر رہا ھے" #. Type: select #. Description #. :sl2: #: ../net-retriever.templates:1002 msgid "" "The installer failed to download a file from the mirror. This may be a " "problem with your network, or with the mirror. You can choose to retry the " "download, select a different mirror, or cancel and choose another " "installation method." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-retriever.templates:1001 msgid "Failed to copy file from CD-ROM. Retry?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../cdrom-retriever.templates:1001 msgid "" "There was a problem reading data from the CD-ROM. Please make sure it is in " "the drive. If retrying does not work, you should check the integrity of your " "CD-ROM." msgstr "" #. Type: text #. Description #. :sl2: #: ../media-retriever.templates:1001 #, fuzzy msgid "Scanning removable media" msgstr "باقی رہ گی ڈرایوز کو فلاپی ڈرایور سے لوڈ کرو؟" #. Type: text #. Description #. :sl2: #: ../media-retriever.templates:2001 #, fuzzy msgid "Cannot read removable media, or no drivers found." msgstr "کوءی پارٹیشنابل میڈیا نہیں ملا ھے" #. Type: text #. Description #. :sl2: #: ../media-retriever.templates:2001 msgid "" "There was a problem reading data from the removable media. Please make sure " "that the right media is present. If you continue to have trouble, your " "removable media might be bad." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-base.templates:5001 #, fuzzy msgid "Device in use" msgstr "ڈیوایس استعمال میں ھے" #. Type: error #. Description #. :sl2: #: ../partman-base.templates:5001 msgid "" "No modifications can be made to the device ${DEVICE} for the following " "reasons:" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-base.templates:6001 #, fuzzy msgid "Partition in use" msgstr "پارٹیشنگ کی سکیم:" #. Type: error #. Description #. :sl2: #. This should be translated as "partition *number* ${PARTITION}" #. In short, ${PARTITION} will indeed contain the partition #. NUMBER and not the partition NAME #: ../partman-base.templates:6001 msgid "" "No modifications can be made to the partition #${PARTITION} of device " "${DEVICE} for the following reasons:" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-base.templates:10001 #, fuzzy msgid "Continue with the installation?" msgstr "انسٹالیشن ختم کرو" #. Type: boolean #. Description #. :sl2: #: ../partman-base.templates:10001 msgid "" "No partition table changes and no creation of file systems have been planned." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-base.templates:10001 msgid "" "If you plan on using already created file systems, be aware that existing " "files may prevent the successful installation of the base system." msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-base.templates:13001 msgid "The following partitions are going to be formatted:" msgstr "" #. Type: text #. Description #. :sl2: #. for example: "partition #6 of IDE0 master as ext3 journaling file system" #: ../partman-base.templates:14001 #, fuzzy msgid "partition #${PARTITION} of ${DEVICE} as ${TYPE}" msgstr "{DEVICE}$ ... کی سویپ کی جگہ فارمیٹ کر رھا ھے {PARTITION}$#کی پارٹیشن " #. Type: text #. Description #. :sl2: #. for devices which have no partitions #. for example: "LVM VG Debian, LV Root as ext3 journaling file system" #: ../partman-base.templates:15001 msgid "${DEVICE} as ${TYPE}" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-base.templates:16001 msgid "The partition tables of the following devices are changed:" msgstr "" #. Type: select #. Description #. :sl2: #: ../partman-base.templates:17001 #, fuzzy msgid "What to do with this device:" msgstr "اس ڈیوایس کو کیا کروں:" #. Type: select #. Description #. :sl2: #: ../partman-base.templates:18001 #, fuzzy msgid "How to use this free space:" msgstr "اس پارٹیشن کو کیسے استعمال کیا جاے:" #. Type: select #. Description #. :sl2: #: ../partman-base.templates:19001 #, fuzzy msgid "Partition settings:" msgstr "پارٹیشنز فارمیٹ ھو رھی ھیں" #. Type: select #. Description #. :sl2: #: ../partman-base.templates:19001 #, fuzzy msgid "" "You are editing partition #${PARTITION} of ${DEVICE}. ${OTHERINFO} " "${DESTROYED}" msgstr "{DEVICE}$ ... کی سویپ کی جگہ فارمیٹ کر رھا ھے {PARTITION}$#کی پارٹیشن " #. Type: text #. Description #. :sl2: #: ../partman-base.templates:20001 msgid "This partition is formatted with the ${FILESYSTEM}." msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-base.templates:21001 #, fuzzy msgid "No existing file system was detected in this partition." msgstr "اس پارٹیشن کی فایل سسٹم کیلے لیبل:" #. Type: text #. Description #. :sl2: #: ../partman-base.templates:22001 msgid "All data in it WILL BE DESTROYED!" msgstr "" #. Type: note #. Description #. :sl2: #: ../partman-base.templates:23001 msgid "The partition starts from ${FROMCHS} and ends at ${TOCHS}." msgstr "" #. Type: note #. Description #. :sl2: #: ../partman-base.templates:24001 msgid "The free space starts from ${FROMCHS} and ends at ${TOCHS}." msgstr "" #. Type: text #. Description #. :sl2: #. Type: text #. Description #. :sl2: #: ../partman-base.templates:29001 ../partman-base.templates:33001 msgid "Show Cylinder/Head/Sector information" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-base.templates:30001 #, fuzzy msgid "Done setting up the partition" msgstr "پارٹیشنر سٹارٹ ھو رہی ھے" #. Type: text #. Description #. :sl2: #: ../partman-base.templates:34001 #, fuzzy, no-c-format msgid "Dump partition info in %s" msgstr "کوءی پارٹیشنابل میڈیا نہیں ھے" #. #-#-#-#-# templates.pot (partman-auto) #-#-#-#-# #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #: ../partman-auto.templates:3001 ../partman-auto.templates:4001 #: ../partman-auto-lvm.templates:4001 #, fuzzy msgid "Failed to partition the selected disk" msgstr "منتخب کی گی ڈسک کو پارٹیشن کرنے میں ناکام رھا ھے" #. Type: error #. Description #. :sl2: #: ../partman-auto.templates:3001 msgid "" "This probably happened because the selected disk or free space is too small " "to be automatically partitioned." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-auto.templates:4001 msgid "" "This probably happened because there are too many (primary) partitions in " "the partition table." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-auto.templates:10001 msgid "Unusable free space" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-auto.templates:10001 msgid "" "Partitioning failed because the chosen free space may not be used. There are " "probably too many (primary) partitions in the partition table." msgstr "" #. Type: text #. Description #. :sl2: #. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters #: ../partman-auto.templates:22001 #, fuzzy msgid "Small-disk (< 1GB) partitioning scheme" msgstr "پارٹیشنگ کی سکیم:" #. Type: boolean #. Description #. :sl2: #: ../partman-basicmethods.templates:1001 #, fuzzy msgid "Go back to the menu?" msgstr "مینو پر واپس جا کر ایرر کو صحیح کروں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-basicmethods.templates:1001 #, fuzzy msgid "No file system is specified for partition #${PARTITION} of ${DEVICE}." msgstr "{DEVICE}$ ... بن رھا ھے {TYPE}$ کا فایل سسٹم {PARTITION}$#کی پارٹیشن " #. Type: boolean #. Description #. :sl2: #: ../partman-basicmethods.templates:1001 #, fuzzy msgid "" "If you do not go back to the partitioning menu and assign a file system to " "this partition, it won't be used at all." msgstr "" "اگر ٓاپ پارٹیشن مینو میں واپس جا کران غلطیوں کو درست نہیں کرتے تو، یہ پارٹیشن " "استعمال نہیں ھو گی۔" #. Type: text #. Description #. :sl2: #: ../partman-basicmethods.templates:2001 #, fuzzy msgid "do not use the partition" msgstr "اس پارٹیشن کو کیسے استعمال کیا جاے:" #. Type: text #. Description #. up to 25 character positions #. :sl2: #: ../partman-basicmethods.templates:3001 #, fuzzy msgid "Format the partition:" msgstr "نءی پارٹیشن کی قسم:" #. Type: text #. Description #. :sl2: #: ../partman-basicmethods.templates:4001 #, fuzzy msgid "yes, format it" msgstr "فارمیٹ" #. Type: text #. Description #. :sl2: #: ../partman-basicmethods.templates:5001 msgid "no, keep existing data" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-basicmethods.templates:6001 msgid "do not use" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-basicmethods.templates:8001 #, fuzzy msgid "format the partition" msgstr "نءی پارٹیشن کی قسم:" #. Type: text #. Description #. :sl2: #: ../partman-basicmethods.templates:10001 msgid "keep and use the existing data" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:1001 #, fuzzy msgid "Resizing partition..." msgstr "پارٹیشن کو کاپی کر رہا ھے..." #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:3001 msgid "The resize operation is impossible" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:3001 msgid "Because of an unknown reason it is impossible to resize this partition." msgstr "" #. #-#-#-#-# templates.pot (partman-partitioning) #-#-#-#-# #. Type: error #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: boolean #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl4: #. #-#-#-#-# templates.pot (grub-installer) #-#-#-#-# #. Type: error #. Description #. :sl4: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (partman-iscsi) #-#-#-#-# #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (partman-lvm) #-#-#-#-# #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #: ../partman-partitioning.templates:3001 ../clock-setup.templates:9001 #: ../bootstrap-base.templates:4001 ../bootstrap-base.templates:5001 #: ../bootstrap-base.templates:6001 ../bootstrap-base.templates:7001 #: ../bootstrap-base.templates:11001 ../bootstrap-base.templates:16001 #: ../nobootloader.templates:2001 ../grub-installer.templates:32001 #: ../network-console.templates:10001 ../partman-iscsi.templates:12001 #: ../lvmcfg-utils.templates:24001 ../lvmcfg-utils.templates:32001 #: ../lvmcfg-utils.templates:37001 ../partman-lvm.templates:32001 #: ../partman-lvm.templates:46001 ../partman-lvm.templates:53001 #: ../partman-lvm.templates:57001 ../partman-lvm.templates:60001 #: ../partman-auto-lvm.templates:7001 ../partman-auto-raid.templates:1001 msgid "Check /var/log/syslog or see virtual console 4 for the details." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:4001 #, fuzzy msgid "Write previous changes to disk and continue?" msgstr "پچھلی تبدیلیوں کو ڈسک پر لکھوں اور جاری رکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:4001 msgid "" "Before you can select a new partition size, any previous changes have to be " "written to disk." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:4001 msgid "You cannot undo this operation." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:4001 msgid "Please note that the resize operation may take a long time." msgstr "" #. Type: string #. Description #. :sl2: #. Type: string #. Description #. :sl2: #: ../partman-partitioning.templates:5001 #: ../partman-partitioning.templates:10001 #, fuzzy msgid "New partition size:" msgstr "کوءی پارٹیشنابل میڈیا نہیں ھے" #. Type: string #. Description #. :sl2: #: ../partman-partitioning.templates:5001 msgid "" "The minimum size for this partition is ${MINSIZE} (or ${PERCENT}) and its " "maximum size is ${MAXSIZE}." msgstr "" #. Type: string #. Description #. :sl2: #. Type: string #. Description #. :sl2: #: ../partman-partitioning.templates:5001 #: ../partman-partitioning.templates:10001 #, no-c-format msgid "" "Hint: \"max\" can be used as a shortcut to specify the maximum size, or " "enter a percentage (e.g. \"20%\") to use that percentage of the maximum size." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:6001 #, fuzzy msgid "The size entered is invalid" msgstr "دیا گیا گیٹوے اڈریس نا قابل رسای ھے" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:6001 msgid "" "The size you entered was not understood. Please enter a positive integer " "size followed by an optional unit of measure (e.g. \"200 GB\"). The default " "unit of measure is the megabyte." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:7001 msgid "The size entered is too large" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:7001 msgid "" "The size you entered is larger than the maximum size of the partition. " "Please enter a smaller size to continue." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:8001 msgid "The size entered is too small" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:8001 msgid "" "The size you entered is smaller than the minimum size of the partition. " "Please enter a larger size to continue." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:9001 #, fuzzy msgid "Resize operation failure" msgstr "ریسایز کا ٓاپریشن ناکام" #. #-#-#-#-# templates.pot (partman-partitioning) #-#-#-#-# #. Type: error #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #: ../partman-partitioning.templates:9001 ../partman-md.templates:21001 #, fuzzy msgid "An error occurred while writing the changes to the storage devices." msgstr "سٹورج ڈیوایس پر تبدیلیؤں کو لکھتے ھوے ایرر ھے۔" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:9001 #, fuzzy msgid "The resize operation has been aborted." msgstr "کاپی کے ٓاپریشن کو ختم کر دیا گیا ھے۔" #. Type: string #. Description #. :sl2: #: ../partman-partitioning.templates:10001 #, fuzzy msgid "The maximum size for this partition is ${MAXSIZE}." msgstr "اس پارٹیشن کیلے ماؤنٹ پواینٹ:" #. Type: error #. Description #. :sl2: #: ../partman-partitioning.templates:11001 #, fuzzy msgid "Invalid size" msgstr "غلط سایز" #. Type: multiselect #. Description #. :sl2: #: ../partman-partitioning.templates:14001 #, fuzzy msgid "Flags for the new partition:" msgstr "نءی پارتیشن کیلے فایل سسٹم:" #. Type: string #. Description #. :sl2: #: ../partman-partitioning.templates:15001 #, fuzzy msgid "Partition name:" msgstr "پارٹیشنگ کا طریقہ:" #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:16001 #: ../partman-partitioning.templates:17001 #, fuzzy msgid "Continue with partitioning?" msgstr "پارٹیشنگ کے ساتھ جاری رکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:16001 msgid "" "This partitioner doesn't have information about the default type of the " "partition tables on your architecture. Please send an e-mail message to " "debian-boot@lists.debian.org with information." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:16001 msgid "" "Please note that if the type of the partition table is unsupported by " "libparted, then this partitioner will not work properly." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:17001 msgid "" "This partitioner is based on the library libparted which doesn't have " "support for the partition tables used on your architecture. It is strongly " "recommended that you exit this partitioner." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:17001 msgid "" "If you can, please help to add support for your partition table type to " "libparted." msgstr "" #. Type: select #. Description #. :sl2: #: ../partman-partitioning.templates:19001 #, fuzzy msgid "Partition table type:" msgstr "کوءی پارٹیشنابل میڈیا نہیں ھے" #. Type: select #. Description #. :sl2: #: ../partman-partitioning.templates:19001 #, fuzzy msgid "Select the type of partition table to use." msgstr "نیا خالی پارٹیشن ٹیبل لکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:20001 #, fuzzy msgid "Create new empty partition table on this device?" msgstr "اس ڈیوایس پر نیا خالی پارٹیشن ٹیبل بناؤں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:20001 msgid "" "You have selected an entire device to partition. If you proceed with " "creating a new partition table on the device, then all current partitions " "will be removed." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:20001 msgid "Note that you will be able to undo this operation later if you wish." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:21001 #, fuzzy msgid "Write a new empty partition table?" msgstr "نیا خالی پارٹیشن ٹیبل لکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:21001 msgid "" "Because of limitations in the current implementation of the Sun partition " "tables in libparted, the newly created partition table has to be written to " "the disk immediately." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:21001 msgid "" "You will NOT be able to undo this operation later and all existing data on " "the disk will be irreversibly removed." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:21001 msgid "" "Confirm whether you actually want to create a new partition table and write " "it to disk." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:22001 #, fuzzy msgid "Are you sure you want a bootable logical partition?" msgstr "کیا ٓاپ واقعی ابھی ختم کرنا چاھتے ھیں" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:22001 msgid "" "You are trying to set the bootable flag on a logical partition. The bootable " "flag is generally only useful on primary partitions, so setting it on " "logical partitions is normally discouraged. Some BIOS versions are known to " "fail to boot if there is no bootable primary partition." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-partitioning.templates:22001 msgid "" "However, if you are sure that your BIOS does not have this problem, or if " "you are using a custom boot manager that pays attention to bootable logical " "partitions, then setting this flag may make sense." msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:23001 #, fuzzy msgid "Set the partition flags" msgstr "پارٹیشن کرنے کیلے ڈسک کا انتخاب کریں:" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:24001 msgid "Name:" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:25001 msgid "Bootable flag:" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:26001 msgid "on" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:27001 msgid "off" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:28001 msgid "Resize the partition (currently ${SIZE})" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:29001 #, fuzzy msgid "Delete the partition" msgstr "پارٹیشن کرنے کیلے ڈسک کا انتخاب کریں:" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:30001 #, fuzzy msgid "Create a new partition" msgstr "پارٹیشن کرنے کیلے ڈسک کا انتخاب کریں:" #. Type: text #. Description #. :sl2: #: ../partman-partitioning.templates:31001 #, fuzzy msgid "Create a new empty partition table on this device" msgstr "اس ڈیوایس پر نیا خالی پارٹیشن ٹیبل بناؤں؟" #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:6001 #: ../partman-basicfilesystems.templates:7001 #, fuzzy msgid "Go back to the menu and correct errors?" msgstr "مینو پر واپس جا کر ایرر کو صحیح کروں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:6001 #, fuzzy msgid "" "The test of the file system with type ${TYPE} in partition #${PARTITION} of " "${DEVICE} found uncorrected errors." msgstr "" "{DEVICE}$ ... چیک ھو رھا ھے ${TYPE} کا فایل سسٹم {PARTITION}$#کی پارٹیشن " #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:6001 #: ../partman-basicfilesystems.templates:7001 #, fuzzy msgid "" "If you do not go back to the partitioning menu and correct these errors, the " "partition will be used as is." msgstr "" "اگر ٓاپ پارٹیشن مینو میں واپس جا کران غلطیوں کو درست نہیں کرتے تو، یہ پارٹیشن " "استعمال نہیں ھو گی۔" #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:7001 #, fuzzy msgid "" "The test of the swap space in partition #${PARTITION} of ${DEVICE} found " "uncorrected errors." msgstr "" "{DEVICE}$ ... چیک ھو رھا ھے ${TYPE} کا فایل سسٹم {PARTITION}$#کی پارٹیشن " #. #-#-#-#-# templates.pot (partman-basicfilesystems) #-#-#-#-# #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:8001 #: ../partman-basicfilesystems.templates:11001 ../partman-ext3.templates:10001 #, fuzzy msgid "Do you want to return to the partitioning menu?" msgstr "کیا ٓاپ پارٹیشن مینو میں واپس جانا چاھتے ھیں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:8001 msgid "" "You have not selected any partitions for use as swap space. Enabling swap " "space is recommended so that the system can make better use of the available " "physical memory, and so that it behaves better when physical memory is " "scarce. You may experience installation problems if you do not have enough " "physical memory." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:8001 msgid "" "If you do not go back to the partitioning menu and assign a swap partition, " "the installation will continue without swap space." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:9001 #, fuzzy msgid "Failed to create a file system" msgstr "فایل سسٹم کو بنانے میں ناکام رھا" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:9001 #, fuzzy msgid "" "The ${TYPE} file system creation in partition #${PARTITION} of ${DEVICE} " "failed." msgstr "{DEVICE}$ ... بن رھا ھے {TYPE}$ کا فایل سسٹم {PARTITION}$#کی پارٹیشن " #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:10001 #, fuzzy msgid "Failed to create a swap space" msgstr "سویپ کی جگہ کو بنانے میں ناکام رھا" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:10001 #, fuzzy msgid "" "The creation of swap space in partition #${PARTITION} of ${DEVICE} failed." msgstr "{DEVICE}$ ... کی سویپ کی جگہ چیک ھو رھی ھے {PARTITION}$#کی پارٹیشن " #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:11001 #, fuzzy msgid "" "No mount point is assigned for the ${FILESYSTEM} file system in partition #" "${PARTITION} of ${DEVICE}." msgstr "" "{DEVICE}$ ... چیک ھو رھا ھے ${TYPE} کا فایل سسٹم {PARTITION}$#کی پارٹیشن " #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:11001 #, fuzzy msgid "" "If you do not go back to the partitioning menu and assign a mount point from " "there, this partition will not be used at all." msgstr "" "اگر ٓاپ پارٹیشن مینو میں واپس جا کران غلطیوں کو درست نہیں کرتے تو، یہ پارٹیشن " "استعمال نہیں ھو گی۔" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:12001 #, fuzzy msgid "Invalid file system for this mount point" msgstr "نءی پارتیشن کیلے فایل سسٹم:" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:12001 msgid "" "The file system type ${FILESYSTEM} cannot be mounted on ${MOUNTPOINT}, " "because it is not a fully-functional Unix file system. Please choose a " "different file system, such as ${EXT2}." msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 #, fuzzy msgid "/ - the root file system" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/boot - static files of the boot loader" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/home - user home directories" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/tmp - temporary files" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/usr - static data" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/var - variable data" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/srv - data for services provided by this system" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/opt - add-on application software packages" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #: ../partman-basicfilesystems.templates:13001 msgid "/usr/local - local hierarchy" msgstr "" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #. Type: select #. Choices #. :sl2: #: ../partman-basicfilesystems.templates:13001 #: ../partman-basicfilesystems.templates:14001 #, fuzzy msgid "Enter manually" msgstr "تمام معلومات خود انٹر کریں" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl2: #. Type: select #. Choices #. :sl2: #: ../partman-basicfilesystems.templates:13001 #: ../partman-basicfilesystems.templates:14001 #, fuzzy msgid "Do not mount it" msgstr "اس کو ماؤنٹ نہ کرو" #. Type: select #. Description #. Type: select #. Description #. Type: string #. Description #. :sl2: #: ../partman-basicfilesystems.templates:13002 #: ../partman-basicfilesystems.templates:14002 #: ../partman-basicfilesystems.templates:15001 #, fuzzy msgid "Mount point for this partition:" msgstr "اس پارٹیشن کیلے ماؤنٹ پواینٹ:" #. Type: select #. Choices #. :sl2: #: ../partman-basicfilesystems.templates:14001 msgid "/dos" msgstr "" #. Type: select #. Choices #. :sl2: #: ../partman-basicfilesystems.templates:14001 msgid "/windows" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:16001 #, fuzzy msgid "Invalid mount point" msgstr "غلط ھوسٹ کا نام" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:16001 #, fuzzy msgid "The mount point you entered is invalid." msgstr "دیا گیا گیٹوے اڈریس نا قابل رسای ھے" #. Type: error #. Description #. :sl2: #: ../partman-basicfilesystems.templates:16001 msgid "Mount points must start with \"/\". They cannot contain spaces." msgstr "" #. Type: string #. Description #. :sl2: #: ../partman-basicfilesystems.templates:17001 #, fuzzy msgid "Label for the file system in this partition:" msgstr "اس پارٹیشن کی فایل سسٹم کیلے لیبل:" #. Type: text #. Description #. :sl2: #: ../partman-basicfilesystems.templates:18001 #, fuzzy msgid "Format the swap area:" msgstr "پارٹیشن کر فارمیٹ کرو:" #. #-#-#-#-# templates.pot (partman-basicfilesystems) #-#-#-#-# #. Type: text #. Description #. In the following context: "Format the partition: yes" #. :sl2: #. #-#-#-#-# templates.pot (partman-crypto) #-#-#-#-# #. Type: text #. Description #. :sl3: #: ../partman-basicfilesystems.templates:19001 #: ../partman-crypto.templates:20001 #, fuzzy msgid "yes" msgstr "ہاں " #. #-#-#-#-# templates.pot (partman-basicfilesystems) #-#-#-#-# #. Type: text #. Description #. In the following context: "Format the partition: no" #. :sl2: #. #-#-#-#-# templates.pot (partman-crypto) #-#-#-#-# #. Type: text #. Description #. :sl3: #: ../partman-basicfilesystems.templates:20001 #: ../partman-crypto.templates:19001 msgid "no" msgstr "" #. Type: text #. Description #. label of file system #. :sl2: #: ../partman-basicfilesystems.templates:21001 msgid "Label:" msgstr "" #. Type: text #. Description #. for partman-basicfilesystems: in the following context: "Label: none" #. :sl2: #: ../partman-basicfilesystems.templates:22001 msgid "" "none[ Do not translate what's inside the brackets and just put the " "translation for the word \"none\" in your language without any brackets. " "This \"none\" relates to \"Label:\" ]" msgstr "" #. Type: text #. Description #. Up to 24 character positions #. :sl2: #: ../partman-basicfilesystems.templates:23001 msgid "Reserved blocks:" msgstr "" #. Type: string #. Description #. :sl2: #: ../partman-basicfilesystems.templates:24001 msgid "Percentage of the file system blocks reserved for the super-user:" msgstr "" #. Type: text #. Description #. :sl2: #. Up to 25 character positions #: ../partman-basicfilesystems.templates:25001 #, fuzzy msgid "Typical usage:" msgstr "اس پارٹیشن کیلے ٹیپیکل یوزیج:" #. Type: text #. Description #. :sl2: #. In the following context: "Typical usage: standard" #: ../partman-basicfilesystems.templates:26001 msgid "standard" msgstr "" #. Type: text #. Description #. This is an item in the menu "Partition settings" #. :sl2: #: ../partman-basicfilesystems.templates:28001 #, fuzzy msgid "Mount point:" msgstr "ماؤنٹ پواینٹ:" #. Type: text #. Description #. :sl2: #. In the following context: "Mount point: none" #: ../partman-basicfilesystems.templates:29001 msgid "" "none[ Do not translate what's inside the brackets and just put the " "translation for the word \"none\" in your language without any brackets. " "This \"none\" relates to \"Mount point:\" ]" msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-basicfilesystems.templates:30001 #, fuzzy msgid "Ext2 file system" msgstr "فایل سسٹم Ext2" #. Type: text #. Description #. :sl2: #: ../partman-basicfilesystems.templates:32001 #, fuzzy msgid "FAT16 file system" msgstr "فایل سسٹم Ext2" #. Type: text #. Description #. :sl2: #: ../partman-basicfilesystems.templates:34001 #, fuzzy msgid "FAT32 file system" msgstr "فایل سسٹم Ext2" #. Type: text #. Description #. :sl2: #: ../partman-basicfilesystems.templates:36001 #, fuzzy msgid "NTFS journaling file system" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: text #. Description #. :sl2: #. Type: text #. Description #: ../partman-basicfilesystems.templates:38001 #: ../partman-basicfilesystems.templates:40001 msgid "swap area" msgstr "سویپ ایریا" #. Type: text #. Description #. Type: multiselect #. Description #. :sl2: #: ../partman-basicfilesystems.templates:42001 #: ../partman-basicfilesystems.templates:43001 #, fuzzy msgid "Mount options:" msgstr "ماؤنٹ پواینٹ:" #. Type: multiselect #. Description #. :sl2: #: ../partman-basicfilesystems.templates:43001 msgid "Mount options can tune the behavior of the file system." msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:44001 msgid "noatime - do not update inode access times at each access" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:45001 msgid "nodiratime - do not update directory inode access times" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:46001 msgid "relatime - update inode access times relative to modify time" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:47001 msgid "nodev - do not support character or block special devices" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:48001 msgid "nosuid - ignore set-user-identifier or set-group-identifier bits" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:49001 msgid "noexec - do not allow execution of any binaries" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:50001 #, fuzzy msgid "ro - mount the file system read-only" msgstr "فایل سسٹم Ext2" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:51001 msgid "sync - all input/output activities occur synchronously" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:52001 msgid "usrquota - user disk quota accounting enabled" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:53001 msgid "grpquota - group disk quota accounting enabled" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:54001 msgid "user_xattr - support user extended attributes" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:55001 msgid "quiet - changing owner and permissions does not return errors" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:56001 msgid "notail - disable packing of files into the file system tree" msgstr "" #. Type: text #. Description #. :sl2: #. Note to translators: Please keep your translations of this string below #. a 65 columns limit (which means 65 characters in single-byte languages) #: ../partman-basicfilesystems.templates:57001 msgid "discard - trim freed blocks from underlying block device" msgstr "" #. #-#-#-#-# templates.pot (partman-basicfilesystems) #-#-#-#-# #. Type: boolean #. Description #. :sl5: #. Type: boolean #. Description #. :sl5: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:60001 #: ../partman-basicfilesystems.templates:61001 ../partman-ext3.templates:7001 #: ../partman-ext3.templates:8001 #, fuzzy msgid "Go back to the menu and correct this problem?" msgstr "مینو پر واپس جا کر ایرر کو صحیح کروں؟" #. #-#-#-#-# templates.pot (partman-basicfilesystems) #-#-#-#-# #. Type: boolean #. Description #. :sl5: #. Type: boolean #. Description #. :sl5: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: boolean #. Description #. :sl2: #. Type: boolean #. Description #. :sl2: #: ../partman-basicfilesystems.templates:60001 #: ../partman-basicfilesystems.templates:61001 ../partman-ext3.templates:7001 #: ../partman-ext3.templates:8001 #, fuzzy msgid "" "If you do not go back to the partitioning menu and correct this error, the " "partition will be used as is. This means that you may not be able to boot " "from your hard disk." msgstr "" "اگر ٓاپ پارٹیشن مینو میں واپس جا کران غلطیوں کو درست نہیں کرتے تو، یہ پارٹیشن " "استعمال نہیں ھو گی۔" #. Type: text #. Description #. :sl2: #. File system name #: ../partman-ext3.templates:2001 #, fuzzy msgid "Ext3 journaling file system" msgstr "فایل سسٹم Ext2" #. Type: text #. Description #. :sl2: #. File system name #: ../partman-ext3.templates:5001 #, fuzzy msgid "Ext4 journaling file system" msgstr "فایل سسٹم Ext2" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:7001 msgid "" "Your boot partition has not been configured with the ext2 or ext3 file " "system. This is needed by your machine in order to boot. Please go back and " "use either the ext2 or ext3 file system." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:8001 msgid "" "Your boot partition is not located on the first primary partition of your " "hard disk. This is needed by your machine in order to boot. Please go back " "and use your first primary partition as a boot partition." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:9001 msgid "Return to the menu to set the bootable flag?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:9001 msgid "" "The boot partition has not been marked as a bootable partition, even though " "this is required by your machine in order to boot. You should go back and " "set the bootable flag for the boot partition." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:9001 #, fuzzy msgid "" "If you don't correct this, the partition will be used as is and it is likely " "that the machine cannot boot from its hard disk." msgstr "" "اگر ٓاپ پارٹیشن مینو میں واپس جا کران غلطیوں کو درست نہیں کرتے تو، یہ پارٹیشن " "استعمال نہیں ھو گی۔" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:10001 msgid "" "The partition ${PARTITION} assigned to ${MOUNTPOINT} starts at an offset of " "${OFFSET} bytes from the minimum alignment for this disk, which may lead to " "very poor performance." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-ext3.templates:10001 msgid "" "Since you are formatting this partition, you should correct this problem now " "by realigning the partition, as it will be difficult to change later. To do " "this, go back to the main partitioning menu, delete the partition, and " "recreate it in the same position with the same settings. This will cause the " "partition to start at a point best suited for this disk." msgstr "" #. Type: text #. Description #. :sl2: #. File system name #: ../partman-btrfs.templates:2001 #, fuzzy msgid "btrfs journaling file system" msgstr "فایل سسٹم Ext2" #. Type: error #. Description #. :sl2: #: ../partman-btrfs.templates:4001 #, fuzzy msgid "btrfs root file system not supported without separate /boot" msgstr "کویی رووٹ فایل سسٹم نہیںبتایا گیا۔" #. Type: error #. Description #. :sl2: #: ../partman-btrfs.templates:4001 msgid "" "Your root file system is a btrfs file system. This is not supported by the " "boot loader used by default by this installer." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-btrfs.templates:4001 msgid "" "You should use a small /boot partition with another file system, such as " "ext4." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-btrfs.templates:5001 #, fuzzy msgid "btrfs file system not supported for /boot" msgstr "کویی رووٹ فایل سسٹم نہیںبتایا گیا۔" #. Type: error #. Description #. :sl2: #: ../partman-btrfs.templates:5001 msgid "" "You have mounted a btrfs file system as /boot. This is not supported by the " "boot loader used by default by this installer." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-btrfs.templates:5001 msgid "" "You should use another file system, such as ext4, for the /boot partition." msgstr "" #. Type: text #. Description #. File system name #. :sl2: #: ../partman-jfs.templates:2001 #, fuzzy msgid "JFS journaling file system" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: boolean #. Description #. :sl2: #: ../partman-jfs.templates:4001 #, fuzzy msgid "Use unrecommended JFS root file system?" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: boolean #. Description #. :sl2: #: ../partman-jfs.templates:4001 msgid "" "Your root file system is a JFS file system. This can cause problems with the " "boot loader used by default by this installer." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-jfs.templates:4001 msgid "" "You should use a small /boot partition with another file system, such as " "ext3." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-jfs.templates:5001 #, fuzzy msgid "Use unrecommended JFS /boot file system?" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: boolean #. Description #. :sl2: #: ../partman-jfs.templates:5001 msgid "" "You have mounted a JFS file system as /boot. This is likely to cause " "problems with the boot loader used by default by this installer." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-jfs.templates:5001 msgid "" "You should use another file system, such as ext3, for the /boot partition." msgstr "" #. Type: text #. Description #. :sl2: #. File system name #: ../partman-xfs.templates:2001 #, fuzzy msgid "XFS journaling file system" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:4001 msgid "Identical labels for two file systems" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:4001 msgid "" "Two file systems are assigned the same label (${LABEL}): ${PART1} and " "${PART2}. Since file system labels are usually used as unique identifiers, " "this is likely to cause reliability problems later." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:4001 #, fuzzy msgid "Please correct this by changing labels." msgstr "پلیز پارٹیشنگ مینو میں جا کر اس کو صحیح کریں۔" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:5001 msgid "Identical mount points for two file systems" msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:5001 msgid "" "Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} " "and ${PART2}." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:5001 msgid "Please correct this by changing mount points." msgstr "" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:6001 #, fuzzy msgid "No root file system" msgstr "فایل سسٹم Ext2" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:6001 #, fuzzy msgid "No root file system is defined." msgstr "کویی رووٹ فایل سسٹم نہیںبتایا گیا۔" #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #: ../partman-target.templates:6001 ../partman-target.templates:7001 #, fuzzy msgid "Please correct this from the partitioning menu." msgstr "پلیز پارٹیشنگ مینو میں جا کر اس کو صحیح کریں۔" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:7001 #, fuzzy msgid "Separate file system not allowed here" msgstr "اس پارٹیشن کی فایل سسٹم کیلے لیبل:" #. Type: error #. Description #. :sl2: #: ../partman-target.templates:7001 msgid "" "You assigned a separate file system to ${MOUNTPOINT}, but in order for the " "system to start correctly this directory must be on the root file system." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-target.templates:8001 #, fuzzy msgid "Do you want to resume partitioning?" msgstr "مینو پر واپس جا کر ایرر کو صحیح کروں؟" #. Type: boolean #. Description #. :sl2: #: ../partman-target.templates:8001 msgid "" "The attempt to mount a file system with type ${TYPE} in ${DEVICE} at " "${MOUNTPOINT} failed." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../partman-target.templates:8001 msgid "You may resume partitioning from the partitioning menu." msgstr "" #. Type: text #. Description #. :sl2: #: ../partman-target.templates:10001 msgid "Use as:" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../clock-setup.templates:5001 msgid "Set the clock using NTP?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../clock-setup.templates:5001 msgid "" "The Network Time Protocol (NTP) can be used to set the system's clock. The " "installation process works best with a correctly set clock." msgstr "" #. Type: string #. Description #. :sl2: #: ../clock-setup.templates:6001 #, fuzzy msgid "NTP server to use:" msgstr "سرور اڈریسز کے نام:" #. Type: string #. Description #. :sl2: #: ../clock-setup.templates:6001 msgid "" "The default NTP server is almost always a good choice, but if you prefer to " "use another NTP server, you can enter it here." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../clock-setup.templates:9001 msgid "Wait another 30 seconds for hwclock to set the clock?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../clock-setup.templates:9001 msgid "" "Setting the hardware clock is taking longer than expected. The 'hwclock' " "program used to set the clock may have problems talking to the hardware " "clock." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../clock-setup.templates:9001 msgid "" "If you choose to not wait for hwclock to finish setting the clock, this " "system's clock may not be set correctly." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../base-installer.templates:1001 msgid "Proceed with installation to unclean target?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../base-installer.templates:1001 msgid "" "The target file system contains files from a past installation. These files " "could cause problems with the installation process, and if you proceed, some " "of the existing files may be overwritten." msgstr "" #. Type: error #. Description #. :sl2: #: ../base-installer.templates:2001 #, fuzzy msgid "No file system mounted on /target" msgstr "کویی رووٹ فایل سسٹم نہیںبتایا گیا۔" #. Type: error #. Description #. :sl2: #: ../base-installer.templates:2001 msgid "" "Before the installation can proceed, a root file system must be mounted on /" "target. The partitioner and formatter should have done this for you." msgstr "" #. Type: error #. Description #. :sl2: #: ../base-installer.templates:3001 #, fuzzy msgid "Not installing to unclean target" msgstr "انسٹالیشن سٹپ فیل" #. Type: error #. Description #. :sl2: #: ../base-installer.templates:3001 msgid "" "The installation to the target file system has been canceled. You should go " "back and erase or format the target file system before proceeding with the " "install." msgstr "" #. Type: error #. Description #. The base system is the minimal Debian system #. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7 #. :sl2: #: ../bootstrap-base.templates:2001 msgid "Cannot install base system" msgstr "" #. Type: error #. Description #. The base system is the minimal Debian system #. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7 #. :sl2: #: ../bootstrap-base.templates:2001 msgid "" "The installer cannot figure out how to install the base system. No " "installable CD-ROM was found and no valid mirror was configured." msgstr "" #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. SUBST0 is a Release file name. #. Type: error #. Description #. :sl2: #. SUBST0 is a Release.gpg file name #. Type: error #. Description #. :sl2: #. SUBST0 is a gpg key ID #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #. SUBST0 is a filename #. Type: error #. Description #. :sl2: #. SUBST0 is a filename or package name #. Debootstrap is a program name: should not be translated #: ../bootstrap-base.templates:3001 ../bootstrap-base.templates:7001 #: ../bootstrap-base.templates:17001 ../bootstrap-base.templates:18001 #: ../bootstrap-base.templates:19001 ../bootstrap-base.templates:20001 #: ../bootstrap-base.templates:21001 ../bootstrap-base.templates:22001 msgid "Debootstrap Error" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:3001 msgid "Failed to determine the codename for the release." msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:4001 msgid "Failed to install the base system" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:4001 msgid "The base system installation into /target/ failed." msgstr "" #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:5001 ../bootstrap-base.templates:6001 msgid "Base system installation error" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:5001 msgid "" "The debootstrap program exited with an error (return value ${EXITCODE})." msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:6001 msgid "The debootstrap program exited abnormally." msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:7001 msgid "The following error occurred:" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:11001 msgid "Unable to install the selected kernel" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:11001 msgid "" "An error was returned while trying to install the kernel into the target " "system." msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:11001 msgid "Kernel package: '${KERNEL}'." msgstr "" #. Type: select #. Choices #. :sl2: #: ../bootstrap-base.templates:12001 msgid "" "none[ Do not translate what's inside the brackets and just put the " "translation for the word \"none\" in your language without any brackets. " "This \"none\" means \"no kernel\" ]" msgstr "" #. Type: select #. Description #. :sl2: #: ../bootstrap-base.templates:12002 msgid "Kernel to install:" msgstr "" #. Type: select #. Description #. :sl2: #: ../bootstrap-base.templates:12002 msgid "" "The list shows the available kernels. Please choose one of them in order to " "make the system bootable from the hard drive." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../bootstrap-base.templates:14001 msgid "Continue without installing a kernel?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../bootstrap-base.templates:14001 msgid "No installable kernel was found in the defined APT sources." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../bootstrap-base.templates:14001 msgid "" "You may try to continue without a kernel, and manually install your own " "kernel later. This is only recommended for experts, otherwise you will " "likely end up with a machine that doesn't boot." msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:15001 msgid "Cannot install kernel" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:15001 msgid "The installer cannot find a suitable kernel package to install." msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:16001 msgid "Unable to install ${PACKAGE}" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:16001 msgid "" "An error was returned while trying to install the ${PACKAGE} package onto " "the target system." msgstr "" #. Type: error #. Description #. :sl2: #. SUBST0 is a Release file name. #: ../bootstrap-base.templates:17001 msgid "Failed getting Release file ${SUBST0}." msgstr "" #. Type: error #. Description #. :sl2: #. SUBST0 is a Release.gpg file name #: ../bootstrap-base.templates:18001 msgid "Failed getting Release signature file ${SUBST0}." msgstr "" #. Type: error #. Description #. :sl2: #. SUBST0 is a gpg key ID #: ../bootstrap-base.templates:19001 msgid "Release file signed by unknown key (key id ${SUBST0})" msgstr "" #. Type: error #. Description #. :sl2: #: ../bootstrap-base.templates:20001 msgid "Invalid Release file: no valid components." msgstr "" #. Type: error #. Description #. :sl2: #. SUBST0 is a filename #: ../bootstrap-base.templates:21001 msgid "Invalid Release file: no entry for ${SUBST0}." msgstr "" #. Type: error #. Description #. :sl2: #. SUBST0 is a filename or package name #. Debootstrap is a program name: should not be translated #: ../bootstrap-base.templates:22001 msgid "" "Couldn't retrieve ${SUBST0}. This may be due to a network problem or a bad " "CD, depending on your installation method." msgstr "" #. Type: error #. Description #. :sl2: #. SUBST0 is a filename or package name #. Debootstrap is a program name: should not be translated #: ../bootstrap-base.templates:22001 msgid "" "If you are installing from CD-R or CD-RW, burning the CD at a lower speed " "may help." msgstr "" #. Type: error #. Description #. Debootstrap is a program name: should not be translated #. :sl2: #: ../bootstrap-base.templates:57001 msgid "Debootstrap warning" msgstr "" #. Type: error #. Description #. Debootstrap is a program name: should not be translated #. :sl2: #: ../bootstrap-base.templates:57001 msgid "Warning: ${INFO}" msgstr "" #. Type: text #. Description #. SUBST0 is an url #. :sl2: #: ../bootstrap-base.templates:58001 msgid "Retrying failed download of ${SUBST0}" msgstr "" #. Type: text #. Description #. :sl2: #: ../apt-setup-udeb.templates:4001 msgid "Scanning local repositories..." msgstr "" #. Type: text #. Description #. :sl2: #: ../apt-setup-udeb.templates:5001 msgid "Scanning the security updates repository..." msgstr "" #. Type: text #. Description #. :sl2: #: ../apt-setup-udeb.templates:6001 msgid "Scanning the release updates repository..." msgstr "" #. Type: text #. Description #. :sl2: #: ../apt-setup-udeb.templates:7001 msgid "Scanning the backports repository..." msgstr "" #. Type: select #. Choices #. :sl2: #. These are choices of actions so this is, at least in English, #. an infinitive form #: ../apt-setup-udeb.templates:8001 ../apt-mirror-setup.templates:4001 msgid "Ignore" msgstr "اگنور کردو" #. Type: error #. Description #. :sl2: #: ../apt-setup-udeb.templates:10001 msgid "Cannot access repository" msgstr "" #. Type: error #. Description #. :sl2: #: ../apt-setup-udeb.templates:10001 msgid "" "The repository on ${HOST} couldn't be accessed, so its updates will not be " "made available to you at this time. You should investigate this later." msgstr "" #. Type: error #. Description #. :sl2: #: ../apt-setup-udeb.templates:10001 msgid "" "Commented out entries for ${HOST} have been added to the /etc/apt/sources." "list file." msgstr "" #. Type: error #. Description #. :sl2: #: ../apt-cdrom-setup.templates:2001 msgid "apt configuration problem" msgstr "" #. Type: error #. Description #. :sl2: #: ../apt-cdrom-setup.templates:2001 msgid "" "An attempt to configure apt to install additional packages from the CD " "failed." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../apt-mirror-setup.templates:6001 #, fuzzy msgid "Continue without a network mirror?" msgstr "ڈیفالٹ روٹ کے ساتھ جاری رکھوں؟" #. Type: boolean #. Description #. :sl2: #: ../apt-mirror-setup.templates:6001 #, fuzzy msgid "No network mirror was selected." msgstr "کویی نیٹورک انٹرفیس ڈیٹکٹ نہیں ھوا" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:1001 msgid "Use restricted software?" msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:1001 msgid "" "Some non-free software is available in packaged form. Though this software " "is not a part of the main distribution, standard package management tools " "can be used to install it. This software has varying licenses which may " "prevent you from using, modifying, or sharing it." msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:2001 msgid "Use software from the \"universe\" component?" msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:2001 msgid "" "Some additional software is available in packaged form. This software is " "free and, though it is not a part of the main distribution, standard package " "management tools can be used to install it." msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:3001 msgid "Use software from the \"multiverse\" component?" msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:3001 msgid "" "Some non-free software is available in packaged form. Though this software " "is not a part of the main distribution, standard package management tools " "can be used to install it. This software has varying licenses and (in some " "cases) patent restrictions which may prevent you from using, modifying, or " "sharing it." msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:4001 msgid "Use software from the \"partner\" repository?" msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:4001 msgid "" "Some additional software is available from Canonical's \"partner\" " "repository. This software is not part of Ubuntu, but is offered by Canonical " "and the respective vendors as a service to Ubuntu users." msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:5001 msgid "Use backported software?" msgstr "" #. Type: boolean #. Description #. This template is used by the Ubuntu version of d-i. #. :sl2: #: ../apt-mirror-setup.templates-ubuntu:5001 msgid "" "Some software has been backported from the development tree to work with " "this release. Although this software has not gone through such complete " "testing as that contained in the release, it includes newer versions of some " "applications which may provide useful features." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../user-setup-udeb.templates:8001 msgid "Create a normal user account now?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../user-setup-udeb.templates:8001 msgid "" "It's a bad idea to use the root account for normal day-to-day activities, " "such as the reading of electronic mail, because even a small mistake can " "result in disaster. You should create a normal user account to use for those " "day-to-day tasks." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../user-setup-udeb.templates:8001 msgid "" "Note that you may create it later (as well as any additional account) by " "typing 'adduser ' as root, where is an username, like " "'imurdock' or 'rms'." msgstr "" #. Type: error #. Description #. :sl2: #: ../user-setup-udeb.templates:11001 #, fuzzy msgid "Invalid username" msgstr "غلط سایز" #. Type: error #. Description #. :sl2: #: ../user-setup-udeb.templates:11001 msgid "" "The username you entered is invalid. Note that usernames must start with a " "lower-case letter, which can be followed by any combination of numbers and " "more lower-case letters, and must be no more than 32 characters long." msgstr "" #. Type: error #. Description #. :sl2: #: ../user-setup-udeb.templates:12001 msgid "Reserved username" msgstr "" #. Type: error #. Description #. :sl2: #: ../user-setup-udeb.templates:12001 msgid "" "The username you entered (${USERNAME}) is reserved for use by the system. " "Please select a different one." msgstr "" #. Type: error #. Description #. :sl2: #: ../user-setup-udeb.templates:15001 ../grub-installer.templates:11001 msgid "Password input error" msgstr "" #. Type: error #. Description #. :sl2: #: ../user-setup-udeb.templates:15001 ../grub-installer.templates:11001 msgid "The two passwords you entered were not the same. Please try again." msgstr "" #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (partman-iscsi) #-#-#-#-# #. Type: error #. Description #. :sl3: #: ../user-setup-udeb.templates:16001 ../network-console.templates:6001 #: ../partman-iscsi.templates:8001 #, fuzzy msgid "Empty password" msgstr "روٹ کا پاسورڈ" #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl2: #. #-#-#-#-# templates.pot (PACKAGE VERSION) #-#-#-#-# #. Type: error #. Description #. :sl3: #. #-#-#-#-# templates.pot (partman-iscsi) #-#-#-#-# #. Type: error #. Description #. :sl3: #: ../user-setup-udeb.templates:16001 ../network-console.templates:6001 #: ../partman-iscsi.templates:8001 msgid "" "You entered an empty password, which is not allowed. Please choose a non-" "empty password." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../user-setup-udeb.templates:17001 msgid "Enable shadow passwords?" msgstr "" #. Type: boolean #. Description #. :sl2: #: ../user-setup-udeb.templates:17001 msgid "" "Shadow passwords make your system more secure because nobody is able to view " "even encrypted passwords. The passwords are stored in a separate file that " "can only be read by special programs. The use of shadow passwords is " "strongly recommended, except in a few cases such as NIS environments." msgstr "" #. Type: select #. Choices #. :sl2: #: ../cdebconf-udeb.templates:2001 msgid "critical" msgstr "" #. Type: select #. Choices #. :sl2: #: ../cdebconf-udeb.templates:2001 msgid "high" msgstr "" #. Type: select #. Choices #. :sl2: #: ../cdebconf-udeb.templates:2001 msgid "medium" msgstr "" #. Type: select #. Choices #. :sl2: #: ../cdebconf-udeb.templates:2001 msgid "low" msgstr "" #. Type: select #. Description #. :sl2: #: ../cdebconf-udeb.templates:2002 msgid "Ignore questions with a priority less than:" msgstr "" #. Type: select #. Description #. :sl2: #: ../cdebconf-udeb.templates:2002 msgid "" "Packages that use debconf for configuration prioritize the questions they " "might ask you. Only questions with a certain priority or higher are actually " "shown to you; all less important questions are skipped." msgstr "" #. Type: select #. Description #. :sl2: #: ../cdebconf-udeb.templates:2002 msgid "" "You can select the lowest priority of question you want to see:\n" " - 'critical' is for items that will probably break the system\n" " without user intervention.\n" " - 'high' is for items that don't have reasonable defaults.\n" " - 'medium' is for normal items that have reasonable defaults.\n" " - 'low' is for trivial items that have defaults that will work in\n" " the vast majority of cases." msgstr "" #. Type: select #. Description #. :sl2: #: ../cdebconf-udeb.templates:2002 msgid "" "For example, this question is of medium priority, and if your priority were " "already 'high' or 'critical', you wouldn't see this question." msgstr "" #. Type: text #. Description #. :sl2: #: ../cdebconf-priority.templates:1001 msgid "Change debconf priority" msgstr "" #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl3: #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:4001 ../grub-installer.templates:6001 #: ../grub-installer.templates:15001 msgid "Unable to configure GRUB" msgstr "" #. Type: string #. Description #. :sl2: #. Type: select #. Description #. :sl2: #: ../grub-installer.templates:7001 ../grub-installer.templates:8002 #, fuzzy msgid "Device for boot loader installation:" msgstr "انسٹالیشن کو روک دو" #. Type: string #. Description #. :sl2: #. Type: select #. Description #. :sl2: #: ../grub-installer.templates:7001 ../grub-installer.templates:8002 msgid "" "You need to make the newly installed system bootable, by installing the GRUB " "boot loader on a bootable device. The usual way to do this is to install " "GRUB on the master boot record of your first hard drive. If you prefer, you " "can install GRUB elsewhere on the drive, or to another drive, or even to a " "floppy." msgstr "" #. Type: string #. Description #. :sl2: #: ../grub-installer.templates:7001 msgid "" "The device should be specified as a device in /dev. Below are some " "examples:\n" " - \"/dev/sda\" will install GRUB to the master boot record of your first\n" " hard drive;\n" " - \"/dev/sda2\" will use the second partition of your first hard drive;\n" " - \"/dev/sdc5\" will use the first extended partition of your third hard\n" " drive;\n" " - \"/dev/fd0\" will install GRUB to a floppy." msgstr "" #. Type: password #. Description #. :sl2: #: ../grub-installer.templates:9001 #, fuzzy msgid "GRUB password:" msgstr "روٹ کا پاسورڈ" #. Type: password #. Description #. :sl2: #: ../grub-installer.templates:9001 msgid "" "The GRUB boot loader offers many powerful interactive features, which could " "be used to compromise your system if unauthorized users have access to the " "machine when it is starting up. To defend against this, you may choose a " "password which will be required before editing menu entries or entering the " "GRUB command-line interface. By default, any user will still be able to " "start any menu entry without entering the password." msgstr "" #. Type: password #. Description #. :sl2: #: ../grub-installer.templates:9001 msgid "If you do not wish to set a GRUB password, leave this field blank." msgstr "" #. Type: password #. Description #. :sl2: #: ../grub-installer.templates:10001 msgid "" "Please enter the same GRUB password again to verify that you have typed it " "correctly." msgstr "" #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:13001 #, fuzzy msgid "GRUB installation failed" msgstr "انسٹالیشن سٹپ فیل" #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:13001 msgid "" "The '${GRUB}' package failed to install into /target/. Without the GRUB boot " "loader, the installed system will not boot." msgstr "" #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:14001 msgid "Unable to install GRUB in ${BOOTDEV}" msgstr "" #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:14001 msgid "Executing 'grub-install ${BOOTDEV}' failed." msgstr "" #. Type: error #. Description #. :sl2: #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:14001 ../grub-installer.templates:15001 msgid "This is a fatal error." msgstr "" #. Type: error #. Description #. :sl2: #: ../grub-installer.templates:15001 msgid "Executing 'update-grub' failed." msgstr "" #. Type: text #. Description #. Rescue menu item #. :sl2: #: ../grub-installer.templates:29001 #, fuzzy msgid "Reinstall GRUB boot loader" msgstr "انسٹلیشن کمپونینٹس کو لوڈ کرنے میں ناکام رھا" #. Type: text #. Description #. Rescue menu item #. :sl2: #: ../grub-installer.templates:33001 msgid "Force GRUB installation to the EFI removable media path" msgstr "" #. Type: error #. Description #. :sl2: #: ../preseed-common.templates:2001 #, fuzzy msgid "Failed to retrieve the preconfiguration file" msgstr "فایل سسٹم کو بنانے میں ناکام رھا" #. Type: error #. Description #. :sl2: #: ../preseed-common.templates:2001 msgid "" "The file needed for preconfiguration could not be retrieved from " "${LOCATION}. The installation will proceed in non-automated mode." msgstr "" #. Type: error #. Description #. :sl2: #: ../preseed-common.templates:3001 #, fuzzy msgid "Failed to process the preconfiguration file" msgstr "بغیر تار والے نیٹورک کی کنفیگریشن" #. Type: error #. Description #. :sl2: #: ../preseed-common.templates:3001 msgid "" "The installer failed to process the preconfiguration file from ${LOCATION}. " "The file may be corrupt." msgstr "" #. Type: error #. Description #. :sl2: #: ../preseed-common.templates:12001 #, fuzzy msgid "Failed to run preseeded command" msgstr "فایل سسٹم کو بنانے میں ناکام رھا" #. Type: error #. Description #. :sl2: #: ../preseed-common.templates:12001 msgid "" "Execution of preseeded command \"${COMMAND}\" failed with exit code ${CODE}." msgstr "" #. Type: title #. Description #. Info message displayed when running in rescue mode #. :sl2: #: ../rescue-check.templates:2001 #, fuzzy msgid "Rescue mode" msgstr "ریسایز کا ٓاپریشن ناکام" #. Type: select #. Description #. :sl2: #: ../rescue-mode.templates:3002 #, fuzzy msgid "Device to use as root file system:" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: select #. Description #. :sl2: #: ../rescue-mode.templates:3002 msgid "" "Enter a device you wish to use as your root file system. You will be able to " "choose among various rescue operations to perform on this file system." msgstr "" #. Type: select #. Description #. :sl2: #: ../rescue-mode.templates:3002 msgid "" "If you choose not to use a root file system, you will be given a reduced " "choice of operations that can be performed without one. This may be useful " "if you need to correct a partitioning problem." msgstr "" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:8001 #, fuzzy msgid "Execute a shell in ${DEVICE}" msgstr "شیل کو چلاؤ" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:9001 msgid "Execute a shell in the installer environment" msgstr "" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:10001 #, fuzzy msgid "Choose a different root file system" msgstr "کویی رووٹ فایل سسٹم نہیں ھے" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:11001 #, fuzzy msgid "Reboot the system" msgstr "بیس سسٹم کو انسٹال کرو" #. Type: text #. Description #. :sl2: #. Type: text #. Description #. :sl2: #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:12001 ../rescue-mode.templates:16001 #: ../rescue-mode.templates:17001 #, fuzzy msgid "Executing a shell" msgstr "شیل کو چلاؤ" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:12001 msgid "" "After this message, you will be given a shell with ${DEVICE} mounted on \"/" "\". If you need any other file systems (such as a separate \"/usr\"), you " "will have to mount those yourself." msgstr "" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:15001 #, fuzzy msgid "Interactive shell on ${DEVICE}" msgstr "شیل کو چلاؤ" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:16001 msgid "" "After this message, you will be given a shell with ${DEVICE} mounted on \"/" "target\". You may work on it using the tools available in the installer " "environment. If you want to make it your root file system temporarily, run " "\"chroot /target\". If you need any other file systems (such as a separate " "\"/usr\"), you will have to mount those yourself." msgstr "" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:17001 msgid "" "After this message, you will be given a shell in the installer environment. " "No file systems have been mounted." msgstr "" #. Type: text #. Description #. :sl2: #: ../rescue-mode.templates:18001 msgid "Interactive shell in the installer environment" msgstr "" #. Type: password #. Description #. :sl2: #: ../rescue-mode.templates:19001 msgid "Passphrase for ${DEVICE}:" msgstr "" #. Type: password #. Description #. :sl2: #: ../rescue-mode.templates:19001 #, fuzzy msgid "Please enter the passphrase for the encrypted volume ${DEVICE}." msgstr "پلیز اس سسٹم کیلے ھوسٹ کا نام لکھیں۔" #. Type: password #. Description #. :sl2: #: ../rescue-mode.templates:19001 msgid "" "If you don't enter anything, the volume will not be available during rescue " "operations." msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../rescue-mode.templates:20002 #, fuzzy msgid "Partitions to assemble:" msgstr "پارٹیشنگ کا طریقہ:" #. Type: multiselect #. Description #. :sl2: #: ../rescue-mode.templates:20002 msgid "" "Select the partitions to assemble into a RAID array. If you select " "\"Automatic\", then all devices containing RAID physical volumes will be " "scanned and assembled." msgstr "" #. Type: multiselect #. Description #. :sl2: #: ../rescue-mode.templates:20002 msgid "" "Note that a RAID partition at the end of a disk may sometimes cause that " "disk to be mistakenly detected as containing a RAID physical volume. In that " "case, you should select the appropriate partitions individually." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../rescue-mode.templates:21001 #, fuzzy msgid "Mount separate ${FILESYSTEM} partition?" msgstr "اس پارٹیشن کیلے ماؤنٹ پواینٹ:" #. Type: boolean #. Description #. :sl2: #: ../rescue-mode.templates:21001 msgid "The installed system appears to use a separate ${FILESYSTEM} partition." msgstr "" #. Type: boolean #. Description #. :sl2: #: ../rescue-mode.templates:21001 msgid "" "It is normally a good idea to mount it as it will allow operations such as " "reinstalling the boot loader. However, if the file system on ${FILESYSTEM} " "is corrupt then you may want to avoid mounting it." msgstr "" #. Type: select #. Choices #. Possible locations for debug logs to be saved #. :sl2: #: ../save-logs.templates:2001 msgid "floppy" msgstr "" #. Type: select #. Choices #. Possible locations for debug logs to be saved #. :sl2: #: ../save-logs.templates:2001 msgid "web" msgstr "" #. Type: select #. Choices #. Possible locations for debug logs to be saved #. :sl2: #: ../save-logs.templates:2001 #, fuzzy msgid "mounted file system" msgstr "فایل سسٹم Ext2" #. Type: select #. Description #. :sl2: #: ../save-logs.templates:2002 msgid "How should the debug logs be saved or transferred?" msgstr "" #. Type: select #. Description #. :sl2: #: ../save-logs.templates:2002 msgid "" "Debugging log files for the installer can be saved to floppy, served up over " "the web, or saved to a mounted file system." msgstr "" #. Type: string #. Description #. :sl2: #: ../save-logs.templates:3001 msgid "Directory in which to save debug logs:" msgstr "" #. Type: string #. Description #. :sl2: #: ../save-logs.templates:3001 msgid "" "Please make sure the file system you want to save debug logs on is mounted " "before you continue." msgstr "" #. Type: error #. Description #. :sl2: #: ../save-logs.templates:4001 msgid "Cannot save logs" msgstr "" #. Type: error #. Description #. :sl2: #: ../save-logs.templates:4001 msgid "The directory \"${DIR}\" does not exist." msgstr "" #. Type: note #. Description #. :sl2: #: ../save-logs.templates:7001 msgid "Insert formatted floppy in drive" msgstr "" #. Type: note #. Description #. :sl2: #: ../save-logs.templates:7001 msgid "Log files and debug info will be copied into this floppy." msgstr "" #. Type: note #. Description #. :sl2: #: ../save-logs.templates:7001 msgid "" "The information will also be stored in /var/log/installer/ on the installed " "system." msgstr "" #. Type: text #. Description #. Main menu item #. Translators: keep it under 65 columns #. :sl2: #: ../cdrom-checker.templates:12001 msgid "Check the CD-ROM(s) integrity" msgstr ""