# Simplified Chinese translation for Debian Installer.
#
# Copyright (C) 2003-2008 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Translated by Yijun Yuan (2004), Carlos Z.F. Liu (2004,2005,2006) and
# Ming Hua (2005,2006,2007,2008).
# YunQiang Su <wzssyqa@gmail.com>,2010, 2011, 2013.
# Yangfl <mmyangfl@gmail.com>, 2017.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-06-11 11:40+0800\n"
"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
"Language-Team:  <debian-l10n-chinese@lists.debian.org>\n"
"Language: zh\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Gtranslator 2.91.7\n"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:60001
#, no-c-format
msgid "ZFS pool %s, volume %s"
msgstr "ZFS 池 %s，卷 %s"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:62001
#, no-c-format
msgid "DASD %s (%s)"
msgstr "DASD %s (%s)"

#. Type: text
#. Description
#. :sl5:
#: ../partman-base.templates:63001
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr "DASD %s (%s)，第 %s 分区"

#. Type: text
#. Description
#. :sl5:
#. Setting to reserve a small part of the disk for use by BIOS-based bootloaders
#. such as GRUB.
#: ../partman-partitioning.templates:32001
msgid "Reserved BIOS boot area"
msgstr "保留 BIOS 启动区域"

#. Type: text
#. Description
#. :sl5:
#. short variant of 'Reserved BIOS boot area'
#. Up to 10 character positions
#: ../partman-partitioning.templates:33001
msgid "biosgrub"
msgstr "biosgrub"

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-basicfilesystems.templates:60001
msgid ""
"Your boot partition has not been configured with the ext2 file system. This "
"is needed by your machine in order to boot. Please go back and use the ext2 "
"file system."
msgstr ""
"您的启动分区并未设置为使用 ext2 文件系统。为了启动您的计算机必须如此。请返回"
"并使用 ext2 文件系统。"

#. Type: boolean
#. Description
#. :sl5:
#: ../partman-basicfilesystems.templates:61001
msgid ""
"Your boot partition is not located on the first partition of your hard disk. "
"This is needed by your machine in order to boot.  Please go back and use "
"your first partition as a boot partition."
msgstr ""
"您的启动分区并非位于硬盘的第一分区上。为了启动您的计算机必须如此。请返回并使"
"用第一主分区作为启动分区。"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr "ctc: Channel to Channel (CTC) 或 ESCON 连接"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr "qeth: OSA-Express in QDIO mode / HiperSockets"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr "iucv: Inter-User Communication Vehicle - 仅适用于 VM 的客户机"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl5:
#: ../s390-netdevice.templates:1001
msgid "virtio: KVM VirtIO"
msgstr "virtio: KVM VirtIO"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid "Network device type:"
msgstr "网络设备类型："

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:1002
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""
"请选择您的用于安装 (通过 NFS 或 HTTP) Debian 系统的主网络接口的类型。只支持下"
"面列出的设备。"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001
msgid "CTC read device:"
msgstr "CTC 读设备："

#. Type: select
#. Description
#. :sl5:
#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr "下列设备号可能属于 CTC 或 ESCON 连接。"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:3001
msgid "CTC write device:"
msgstr "CTC 写设备："

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001
#: ../s390-netdevice.templates:12001
msgid "Do you accept this configuration?"
msgstr "您接受目前的配置吗？"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:4001
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""
"配置参数是：\n"
" 读通道        = ${device_read}\n"
" 写通道        = ${device_write}\n"
" 协议           = ${protocol}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "No CTC or ESCON connections"
msgstr "没有 CTC 或 ESCON 连接"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:5001
msgid "Please make sure that you have set them up correctly."
msgstr "请确保您正确设置了它们。"

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:6001
msgid "Protocol for this connection:"
msgstr "此连接使用的协议："

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Device:"
msgstr "设备："

#. Type: select
#. Description
#. :sl5:
#: ../s390-netdevice.templates:7001
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr "请选择 OSA-Express QDIO / HiperSockets 设备。"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:8001
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" layer2   = ${layer2}"
msgstr ""
"配置参数是：\n"
" 通道   = ${device0}, ${device1}, ${device2}\n"
" 端口   = ${port}\n"
" layer2 = ${layer2}"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr "没有 OSA-Express QDIO 卡 / HiperSockets"

#. Type: error
#. Description
#. :sl5:
#: ../s390-netdevice.templates:9001
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""
"未探测到 OSA-Express QDIO 卡 / HiperSockets。如果您在运行 VM，请确定接口卡连"
"接到此客户机。"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Port:"
msgstr "端口："

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:10001
msgid "Please enter a relative port for this connection."
msgstr "请选择与此连接相应的端口。"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid "Use this device in layer2 mode?"
msgstr "以 layer2 模式使用这个设备吗？"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:11001
msgid ""
"By default OSA-Express cards use layer3 mode. In that mode LLC headers are "
"removed from incoming IPv4 packets. Using the card in layer2 mode will make "
"it keep the MAC addresses of IPv4 packets."
msgstr ""
"OSA-Express 卡默认使用 layer3 模式。在此模式下会把接收到的 IPv4 封包中的 LLC "
"headers 去除。在 layer2 模式下使用这个设备则会保留 IPv4 封包中的 MAC 地址。"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-netdevice.templates:12001
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""
"配置参数为：\n"
" peer  = ${peer}"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "VM peer:"
msgstr "VM peer:"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid "Please enter the name of the VM peer you want to connect to."
msgstr "请输入您想要连接的 VM peer 的名称。"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr "如果要连接到多个 peer，使用冒号分隔这些名称，例如 tcpip:linux1。"

#. Type: string
#. Description
#. :sl5:
#: ../s390-netdevice.templates:13001
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""
"VM 上标准的 TCP/IP 服务器名是 TCPIP，在 VIF 上是 $TCPIP。注意：VM 用户目录必"
"须启用 IUCV 来使这个驱动可以工作，并且必须在通信两端同时设置。"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../s390-netdevice.templates:14001
msgid "Configure the network device"
msgstr "配置网络设备"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Available devices:"
msgstr "可用的设备："

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid ""
"The following direct access storage devices (DASD) are available. Please "
"select each device you want to use one at a time."
msgstr "下列 DASD (直接访问的存储设备) 可用。请一次选择一个您所要使用的设备。"

#. Type: select
#. Description
#. :sl5:
#: ../s390-dasd.templates:1002
msgid "Select \"Finish\" at the bottom of the list when you are done."
msgstr "完成后，请选择列表底部的“结束”。"

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid "Choose device:"
msgstr "选择设备："

#. Type: string
#. Description
#. :sl5:
#: ../s390-dasd.templates:2001
msgid ""
"Please choose a device. You have to specify the complete device number, "
"including leading zeros."
msgstr "请选择一个设备。您需要指定完整的设备号码，包括前导的 0。"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "Invalid device"
msgstr "无效的设备"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:3001
msgid "An invalid device number has been chosen."
msgstr "选择了一个无效的设备号。"

#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001 ../s390-dasd.templates:5001
msgid "Format the device?"
msgstr "格式化此设备吗？"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid "The DASD ${device} is already low-level formatted."
msgstr "DASD 设备 ${device} 已经经过低级格式化。"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:4001
msgid ""
"Please choose whether you want to format again and remove any data on the "
"DASD. Note that formatting a DASD might take a long time."
msgstr ""
"请选择是否要重新格式化并移除 DASD 上的任何数据。格式化 DASD 可能很耗时。"

#. Type: boolean
#. Description
#. :sl5:
#: ../s390-dasd.templates:5001
msgid ""
"The DASD ${device} is not low-level formatted. DASD devices must be "
"formatted before you can create partitions."
msgstr ""
"安装程序无法检测设备 ${device} 是否已经过低级格式化。要在设备上创建分区，您必"
"须先将其格式化。"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:6001
msgid "The DASD ${device} is in use"
msgstr "DASD 设备 ${device} 正在使用中"

#. Type: error
#. Description
#. :sl5:
#: ../s390-dasd.templates:6001
msgid ""
"Could not low-level format the DASD ${device} because the DASD is in use.  "
"For example, the DASD could be a member of a mapped device in an LVM volume "
"group."
msgstr ""
"DASD ${device} 正在使用中，无法进行低级格式化。例如，该 DASD 可能是 LVM 卷组"
"中被映射的设备。"

#. Type: text
#. Description
#. :sl5:
#: ../s390-dasd.templates:7001
msgid "Formatting ${device}..."
msgstr "正在格式化 ${device}..."

#. Type: text
#. Description
#. Main menu item. Keep translations below 55 columns
#. :sl5:
#: ../s390-dasd.templates:8001
msgid "Configure direct access storage devices (DASD)"
msgstr "设置直接访问的存储设备 (DASD)"

#. Type: text
#. Description
#. Main menu item
#. :sl5:
#: ../zipl-installer.templates:1001
msgid "Install the ZIPL boot loader on a hard disk"
msgstr "将 ZIPL 启动引导器安装至硬盘"