# Traditional Chinese messages for debian-installer.
# Copyright (C) 2003 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-06-06 20:38+0800\n"
"Last-Translator: Yao Wei (魏銘廷) <mwei@lxde.org>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
"debian.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.11\n"

#. Type: error
#. Description
#. :sl2:
#: ../main-menu.templates:3001
msgid "Installation step failed"
msgstr "安裝步驟失敗"

#. Type: error
#. Description
#. :sl2:
#: ../main-menu.templates:3001
msgid ""
"An installation step failed. You can try to run the failing item again from "
"the menu, or skip it and choose something else. The failing step is: ${ITEM}"
msgstr ""
"有個安裝步驟失敗了。您可以從選單中再次試著執行那個失敗的項目，或略過它並選擇"
"其它步驟。該失敗的步驟為: ${ITEM}"

#. Type: select
#. Description
#. :sl2:
#: ../main-menu.templates:4001
msgid "Choose an installation step:"
msgstr "請選擇一個安裝步驟:"

#. Type: select
#. Description
#. :sl2:
#: ../main-menu.templates:4001
msgid ""
"This installation step depends on one or more other steps that have not yet "
"been performed."
msgstr "這一個安裝步驟相依於另外一個或多個尚未進行的步驟。"

#. Type: note
#. Description
#. :sl2:
#. Type: text
#. Description
#. :sl2:
#: ../di-utils-shell.templates:1001 ../di-utils.templates:5001
msgid "Interactive shell"
msgstr "互動式 shell"

#. Type: note
#. Description
#. :sl2:
#: ../di-utils-shell.templates:1001
msgid "After this message, you will be running \"ash\", a Bourne-shell clone."
msgstr "在本訊息之後，您將進入 ash，一個 Bourne-shell 的仿製品。"

#. Type: note
#. Description
#. :sl2:
#: ../di-utils-shell.templates:1001
msgid ""
"The root file system is a RAM disk. The hard disk file systems are mounted "
"on \"/target\". The editor available to you is nano. It's very small and "
"easy to figure out. To get an idea of what Unix utilities are available to "
"you, use the \"help\" command."
msgstr ""
"Root 檔案系統是一個 RAM 磁碟。硬碟的檔案系統則是掛載於 /target。您可使用的文"
"書編輯器是 nano﹔它非常得短小輕快且易於使用。如果想知道有那些 Unix 工具程式可"
"用，請執行 help 指令。"

#. Type: note
#. Description
#. :sl2:
#: ../di-utils-shell.templates:1001
msgid "Use the \"exit\" command to return to the installation menu."
msgstr "使用 exit 指令來回到安裝程序選單。"

#. Type: text
#. Description
#. Main menu item
#. The translation should not exceed 55 columns except for languages
#. that are only supported in the graphical version of the installer
#. :sl2:
#: ../di-utils-exit-installer.templates:1001
msgid "Exit installer"
msgstr "離開安裝程式"

#. Type: boolean
#. Description
#. :sl2:
#: ../di-utils-reboot.templates:1001
msgid "Are you sure you want to exit now?"
msgstr "您是否確定要在此時退出？"

#. Type: boolean
#. Description
#. :sl2:
#: ../di-utils-reboot.templates:1001
msgid ""
"If you have not finished the install, your system may be left in an unusable "
"state."
msgstr "如果未能完成安裝程序，系統將可能會處於不可使用的狀態。"

#. Type: error
#. Description
#. :sl2:
#: ../di-utils.templates:6001
msgid "Terminal plugin not available"
msgstr "無法取得終端機外掛"

#. Type: error
#. Description
#. :sl2:
#: ../di-utils.templates:6001
msgid ""
"This build of the debian-installer requires the terminal plugin in order to "
"display a shell. Unfortunately, this plugin is currently unavailable."
msgstr ""
"這個版本的 debian-installer 需要終端機外掛以便能呼叫並顯示 shell。但糟糕的"
"是，目前還無法取得這個外掛。"

#. Type: error
#. Description
#. :sl2:
#: ../di-utils.templates:6001
msgid ""
"It should be available after reaching the \"Loading additional components\" "
"installation step."
msgstr "等進行到 \"載入額外的元件\" 這個安裝步驟後，應當就能使用了。"

#. Type: text
#. Description
#. :sl2:
#: ../di-utils.templates:7001
msgid ""
"Alternatively, you can open a shell by pressing Ctrl+Alt+F2. Use Alt+F5 to "
"get back to the installer."
msgstr ""
"或者，您可以按下 Ctrl+Alt+F2 來開啟 shell。按下 Alt+F5 可以再回到安裝程式。"

#. Type: multiselect
#. Description
#. :sl2:
#. Type: multiselect
#. Description
#. :sl2:
#: ../anna.templates:1001 ../anna.templates:2001
msgid "Installer components to load:"
msgstr "要載入的安裝程式元件:"

#. Type: multiselect
#. Description
#. :sl2:
#: ../anna.templates:1001
msgid ""
"All components of the installer needed to complete the install will be "
"loaded automatically and are not listed here. Some other (optional) "
"installer components are shown below. They are probably not necessary, but "
"may be interesting to some users."
msgstr ""
"所有在安裝過程中會用到的安裝元件將會被自動載入，所以並沒有出現在以下列表中。"
"而以下列出的則是其它可任意選用的安裝元件。雖然他們大概是派不上用場，但是可能"
"有些使用者會用得著。"

#. Type: multiselect
#. Description
#. :sl2:
#. Type: multiselect
#. Description
#. :sl2:
#: ../anna.templates:1001 ../anna.templates:2001
msgid ""
"Note that if you select a component that requires others, those components "
"will also be loaded."
msgstr "注意，如果您所選擇的元件相依於其他元件，那麼這些元件也會被同時載入。"

#. Type: multiselect
#. Description
#. :sl2:
#: ../anna.templates:2001
msgid ""
"To save memory, only components that are certainly needed for an install are "
"selected by default. The other installer components are not all necessary "
"for a basic install, but you may need some of them, especially certain "
"kernel modules, so look through the list carefully and select the components "
"you need."
msgstr ""
"為了節省記憶體，預設上只會選取安裝程式所必要的元件。其它的安裝元件基本上在安"
"裝過程中並不會派上用場，但其中也許有些是您會用得到的，尤其是某些 Kernel 模"
"組，所以請仔細得檢視這個列表，並選擇您所需要的元件。"

#. Type: error
#. Description
#. :sl2:
#: ../anna.templates:7001
msgid "Failed to load installer component"
msgstr "無法載入安裝程式的元件"

#. Type: error
#. Description
#. :sl2:
#: ../anna.templates:7001
msgid "Loading ${PACKAGE} failed for unknown reasons. Aborting."
msgstr "因不明原因導致無法載入 ${PACKAGE}。程序中止。"

#. Type: boolean
#. Description
#. :sl2:
#: ../anna.templates:8001
msgid "Continue the install without loading kernel modules?"
msgstr "是否不載入 Kernel 模組並繼續進行安裝？"

#. Type: boolean
#. Description
#. :sl2:
#: ../anna.templates:8001
msgid ""
"No kernel modules were found. This probably is due to a mismatch between the "
"kernel used by this version of the installer and the kernel version "
"available in the archive."
msgstr ""
"未能找到任何的 Kernel 模組。這很可能是因為安裝程式所使用的 Kernel 版本和檔案"
"來源中所提供的 Kernel 版本不同的緣故。"

#. Type: boolean
#. Description
#. :sl2:
#: ../anna.templates:8001
msgid ""
"If you're installing from a mirror, you can work around this problem by "
"choosing to install a different version of Debian. The install will probably "
"fail to work if you continue without kernel modules."
msgstr ""
"如果您是使用鏡像站來進行安裝，您可以選擇安裝另一個版本的 Debian 來避開這個問"
"題。如果您不載入 Kernel 模組並繼續進行可能會導致安裝程式無法正常運作。"

#. Type: select
#. Description
#. :sl2:
#: ../localechooser.templates-in:4001
msgid "System locale:"
msgstr "系統 locale:"

#. Type: select
#. Description
#. :sl2:
#: ../localechooser.templates-in:4001
msgid "Select the default locale for the installed system."
msgstr "請替要安裝的系統選擇預設的 locale。"

#. Type: multiselect
#. Description
#. :sl2:
#: ../localechooser.templates-in:32001
msgid "Additional locales:"
msgstr "額外的 locale:"

#. Type: multiselect
#. Description
#. :sl2:
#: ../localechooser.templates-in:32001
msgid ""
"Based on your previous choices, the default locale currently selected for "
"the installed system is '${LOCALE}'."
msgstr ""
"依據您之前的選擇，在系統安裝完成後，它的預設 locale 將被設定為 '${LOCALE}'。"

#. Type: multiselect
#. Description
#. :sl2:
#: ../localechooser.templates-in:32001
msgid ""
"If you wish to use a different default or to also have other locales "
"available, you may choose additional locales to be installed. If you are "
"unsure it is best to just use the selected default."
msgstr ""
"如果您希望換用另一個不同的預設值，或希望能同時使用其它的 locale，您可以選擇並"
"安裝其它額外的 locale。如果您無法確定，那使用在此所指定的預設值即可。"

#. Type: note
#. Description
#. :sl2:
#: ../localechooser.templates-in:34001
msgid "locale"
msgstr "locale (地區資訊)"

#. Type: note
#. Description
#. :sl2:
#: ../localechooser.templates-in:34001
msgid ""
"A locale determines character encoding and contains information on for "
"example currency, date format and alphabetical sort order."
msgstr ""
"locale 是用來決定字元的編碼方式，以及包含了一些像是貨幣、時間格式、字母的排序"
"方式等等的資訊。"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:4001
msgid "Keyboard model:"
msgstr "鍵盤型號:"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:4001
msgid "Please select the model of the keyboard of this machine."
msgstr "請選擇這台機器的鍵盤型號。"

#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:12001
msgid "No temporary switch"
msgstr "不要暫時切換"

#. Type: select
#. Choices
#. :sl2:
#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:12001
#: ../keyboard-configuration.templates:13001
msgid "Both Logo keys"
msgstr "兩邊的 Logo 鍵"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:12002
msgid "Method for temporarily toggling between national and Latin input:"
msgstr "在 national 及 Latin 模式間暫時切換的方式:"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:12002
msgid ""
"When the keyboard is in national mode and one wants to type only a few Latin "
"letters, it might be more appropriate to switch temporarily to Latin mode. "
"The keyboard remains in that mode as long as the chosen key is kept pressed. "
"That key may also be used to input national letters when the keyboard is in "
"Latin mode."
msgstr ""
"當鍵盤處於 national 模式，而只是暫時要輸入幾個 Latin 文字的話，更適切的作法是"
"暫時切換到 Latin 模式。只要這個鍵被按下的期間，鍵盤將會持續處於這個模式之下。"
"這個鍵也可以用在 Latin 模式下作為輸入 national 文字之用。"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:12002
msgid "You can disable this feature by choosing \"No temporary switch\"."
msgstr "你可以選擇 \"不要暫時切換\" 來關閉這個功能。"

#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:13001
msgid "The default for the keyboard layout"
msgstr "鍵盤排列方式的預設值"

#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:13001
msgid "No AltGr key"
msgstr "沒有 AltGr 鍵"

#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:13001
msgid "Keypad Enter key"
msgstr "數字區的 Enter 鍵"

#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:13001
msgid "Both Alt keys"
msgstr "兩邊的 Alt 鍵"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:13002
msgid "Key to function as AltGr:"
msgstr "做為 AltGr 的鍵"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:13002
msgid ""
"With some keyboard layouts, AltGr is a modifier key used to input some "
"characters, primarily ones that are unusual for the language of the keyboard "
"layout, such as foreign currency symbols and accented letters. These are "
"often printed as an extra symbol on keys."
msgstr ""
"在某些鍵盤的排列方式裡，會把 AltGr 當作修改鍵，用來輸入在該語言的鍵盤的排列方"
"式裡一些不常用到的字元，像是別國的貨幣符號及重音字元之類的。這些鍵的上面常常"
"會印有額外的符號。"

#. Type: select
#. Choices
#. :sl2:
#: ../keyboard-configuration.templates:14001
msgid "No compose key"
msgstr "沒有 Compose 鍵"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:14002
msgid "Compose key:"
msgstr "Compose 鍵:"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:14002
msgid ""
"The Compose key (known also as Multi_key) causes the computer to interpret "
"the next few keystrokes as a combination in order to produce a character not "
"found on the keyboard."
msgstr ""
"Compose 鍵 (也就是 Multi_key) 會讓電腦將接下來幾個鍵擊轉譯為複合鍵，以便能產"
"生在鍵盤上找不到的字元。"

#. Type: select
#. Description
#. :sl2:
#: ../keyboard-configuration.templates:14002
msgid ""
"On the text console the Compose key does not work in Unicode mode. If not in "
"Unicode mode, regardless of what you choose here, you can always also use "
"the Control+period combination as a Compose key."
msgstr ""
"在終端文字模式下，Compose 鍵無法在 Unicode 模式下運作。若不是在 Unicode 模式"
"下，不管您在此選擇的是什麼，您還是可以用 Control+period 這個組合鍵做為 "
"Compose 鍵。"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:1001
msgid "Load CD-ROM drivers from removable media?"
msgstr "是否要從可移除裝置中載入光碟機的驅動程式？"

#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:1001 ../cdrom-detect.templates:3001
msgid "No common CD-ROM drive was detected."
msgstr "沒有偵測到任何常見的光碟機。"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:1001
msgid ""
"You may need to load additional CD-ROM drivers from removable media, such as "
"a driver floppy. If you have such media available now, insert it, and "
"continue. Otherwise, you will be given the option to manually select CD-ROM "
"modules."
msgstr ""
"您可能需要從可移除裝置 (像是驅動程式軟碟片) 中再載入一些額外的光碟機驅動程"
"式。如果您手上已經有這麼一個媒體，請將其插入並繼續進行。否則，您將得手動來選"
"取要載入的光碟機驅動模組。"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:3001
msgid "Manually select a CD-ROM module and device?"
msgstr "是否手動選擇光碟機裝置及其模組？"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:3001
msgid ""
"Your CD-ROM drive may be an old Mitsumi or another non-IDE, non-SCSI CD-ROM "
"drive. In that case you should choose which module to load and the device to "
"use. If you don't know which module and device are needed, look for some "
"documentation or try a network installation instead of a CD-ROM installation."
msgstr ""
"您的光碟機也許是老式的 Mitsumi 或者其他非 IDE、非 SCSI 的裝置。若真是這樣的"
"話，請您手動選擇它所使用的裝置及其所需載入的模組。如果您不知道應該使用哪一個"
"裝置及模組，請參考相關文件，或者不要使用安裝光碟，替而使用網路安裝。"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:4001
msgid "Retry mounting the CD-ROM?"
msgstr "是否再度嘗試掛載光碟機？"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-detect.templates:4001
msgid ""
"Your installation CD-ROM couldn't be mounted. This probably means that the "
"CD-ROM was not in the drive. If so you can insert it and try again."
msgstr ""
"無法掛載您的安裝光碟，也許是因為光碟片並未放入光碟機中。若是這樣的話，請您放"
"入光碟片後再試一次。"

#. Type: select
#. Description
#. :sl2:
#: ../cdrom-detect.templates:5001
msgid "Module needed for accessing the CD-ROM:"
msgstr "使用此光碟機所需載入的模組:"

#. Type: select
#. Description
#. :sl2:
#: ../cdrom-detect.templates:5001
msgid ""
"The automatic detection didn't find a CD-ROM drive. You can try to load a "
"specific module if you have an unusual CD-ROM drive (that is neither IDE nor "
"SCSI)."
msgstr ""
"自動偵測未能找到任何光碟機。如果您的光碟機十分罕見 (既非 IDE 也非 SCSI)，請嘗"
"試載入其特定的驅動模組。"

#. Type: string
#. Description
#. :sl2:
#: ../cdrom-detect.templates:6001
msgid "Device file for accessing the CD-ROM:"
msgstr "用來存取此光碟機的裝置檔:"

#. Type: string
#. Description
#. :sl2:
#: ../cdrom-detect.templates:6001
msgid ""
"In order to access your CD-ROM drive, please enter the device file that "
"should be used. Non-standard CD-ROM drives use non-standard device files "
"(such as /dev/mcdx)."
msgstr ""
"為了能夠存取您的光碟機，請輸入其所對應的裝置檔。非標準的光碟機通常會使用非標"
"準的裝置檔 (像是 /dev/mcdx)。"

#. Type: string
#. Description
#. :sl2:
#: ../cdrom-detect.templates:6001
msgid ""
"You may switch to the shell on the second terminal (ALT+F2) to check the "
"available devices in /dev with \"ls /dev\". You can return to this screen by "
"pressing ALT+F1."
msgstr ""
"您可以使用 ALT+F2 來切換到第二個終端畫面的 shell 中，並使用 ls /dev 來檢視 /"
"dev 目錄下可用的裝置檔。請再按下 ALT+F1 來返回本畫面。"

#. Type: note
#. Description
#. :sl2:
#: ../cdrom-detect.templates:12001
msgid "CD-ROM detected"
msgstr "已偵測到光碟機"

#. Type: note
#. Description
#. :sl2:
#: ../cdrom-detect.templates:12001
msgid ""
"The CD-ROM autodetection was successful. A CD-ROM drive has been found and "
"it currently contains the CD ${cdname}. The installation will now continue."
msgstr ""
"光碟機自動偵測成功了。找到了一個光碟機，且裡面所放置的光碟是 ${cdname}。安裝"
"作業現可繼續進行。"

#. Type: error
#. Description
#. :sl2:
#: ../cdrom-detect.templates:14001
msgid "Incorrect CD-ROM detected"
msgstr "偵測到了不正確的光碟片"

#. Type: error
#. Description
#. :sl2:
#: ../cdrom-detect.templates:14001
msgid "The CD-ROM drive contains a CD which cannot be used for installation."
msgstr "光碟機中所放入的光碟不能用於安裝程式。"

#. Type: error
#. Description
#. :sl2:
#: ../cdrom-detect.templates:14001
msgid "Please insert a suitable CD to continue with the installation."
msgstr "請放入適當的光碟來讓安裝作業能繼續進行。"

#. Type: error
#. Description
#. Translators: DO NOT TRANSLATE "Release". This is the name of a file.
#. :sl2:
#: ../cdrom-detect.templates:15001
msgid "Error reading Release file"
msgstr "在讀取 Release 檔時發生錯誤"

#. Type: error
#. Description
#. Translators: DO NOT TRANSLATE "Release". This is the name of a file.
#. :sl2:
#: ../cdrom-detect.templates:15001
msgid ""
"The CD-ROM does not seem to contain a valid 'Release' file, or that file "
"could not be read correctly."
msgstr ""
"在這張光碟裡似乎並沒有包含正確的 'Release' 檔，或是這個檔案無法被正確地讀取。"

#. Type: error
#. Description
#. Translators: DO NOT TRANSLATE "Release". This is the name of a file.
#. :sl2:
#: ../cdrom-detect.templates:15001
msgid ""
"You may try to repeat CD-ROM detection but, even if it does succeed the "
"second time, you may experience problems later in the installation."
msgstr ""
"您可以再次試著進行光碟的偵測，但即使第二次僥倖成功了，您在之後的安裝過程裡還"
"是可能會遇到問題。"

#. Type: text
#. Description
#. Item in the main menu to select this package
#. :sl2:
#: ../cdrom-detect.templates:20001
msgid "Detect and mount CD-ROM"
msgstr "偵測並掛載光碟片"

#. Type: select
#. Choices
#. :sl2:
#: ../ethdetect.templates:1001
msgid "no ethernet card"
msgstr "沒有網路卡"

#. Type: select
#. Choices
#. :sl2:
#. "none of the above" should be understood as "none of the above choices"
#: ../ethdetect.templates:1001 ../disk-detect.templates:3001
msgid "none of the above"
msgstr "以上都不是"

#. Type: select
#. Description
#. :sl2:
#: ../ethdetect.templates:1002
msgid "Driver needed by your Ethernet card:"
msgstr "您的網路卡所需的驅動程式:"

#. Type: select
#. Description
#. :sl2:
#: ../ethdetect.templates:1002
msgid ""
"No Ethernet card was detected. If you know the name of the driver needed by "
"your Ethernet card, you can select it from the list."
msgstr ""
"未能偵測到任何網路卡。如果您知道您的網路卡所使用的驅動程式的名稱，請在列表中"
"選取。"

#. Type: error
#. Description
#. :sl2:
#: ../ethdetect.templates:3001
msgid "Ethernet card not found"
msgstr "未能找到網路卡"

#. Type: error
#. Description
#. :sl2:
#: ../ethdetect.templates:3001
msgid "No Ethernet card was found on the system."
msgstr "在系統中未能找到任何的網路卡。"

#. Type: select
#. Choices
#. :sl2:
#: ../disk-detect.templates:3001
msgid "continue with no disk drive"
msgstr "在沒有磁碟裝置的狀況下繼續進行"

#. Type: select
#. Description
#. :sl2:
#: ../disk-detect.templates:3002
msgid "Driver needed for your disk drive:"
msgstr "您的磁碟裝置所需的驅動程式:"

#. Type: select
#. Description
#. :sl2:
#: ../disk-detect.templates:3002
msgid ""
"No disk drive was detected. If you know the name of the driver needed by "
"your disk drive, you can select it from the list."
msgstr ""
"無法偵測到任何磁碟裝置。如果您知道您的磁碟裝置所使用的驅動程式的名稱，請在列"
"表中選取。"

#. Type: error
#. Description
#. :sl2:
#: ../disk-detect.templates:4001
msgid "No partitionable media"
msgstr "沒有可進行磁碟分割的裝置"

#. Type: error
#. Description
#. :sl2:
#: ../disk-detect.templates:4001
msgid "No partitionable media were found."
msgstr "找不到可以進行磁碟分割的裝置。"

#. Type: error
#. Description
#. :sl2:
#: ../disk-detect.templates:4001
msgid "Please check that a hard disk is attached to this machine."
msgstr "請確認在該機器上是否有安裝硬碟。"

#. Type: multiselect
#. Description
#. :sl2:
#: ../hw-detect.templates:5001
msgid "Modules to load:"
msgstr "要載入的模組:"

#. Type: multiselect
#. Description
#. :sl2:
#: ../hw-detect.templates:5001
msgid ""
"The following Linux kernel modules were detected as matching your hardware. "
"If you know some are unnecessary, or cause problems, you can choose not to "
"load them. If you're unsure, you should leave them all selected."
msgstr ""
"以下是被偵測到符合您的硬體裝置的 Linux Kernel 模組。如果您知道其中哪些是不必"
"要的或是會引發問題的，您可以選擇不要載入它們。如果您不確定，請將它們保持為被"
"選取。"

#. Type: boolean
#. Description
#. FIXME: not in use and kept just while we're still in doubt it will
#. be needed
#. :sl2:
#: ../hw-detect.templates:6001
msgid "Start PC card services?"
msgstr "是否要啟動 PC 卡服務程式？"

#. Type: boolean
#. Description
#. FIXME: not in use and kept just while we're still in doubt it will
#. be needed
#. :sl2:
#: ../hw-detect.templates:6001
msgid ""
"Please choose whether PC card services should be started in order to allow "
"the use of PCMCIA cards."
msgstr "為了能夠使用 PCMCIA 卡，請選擇是否要啟動 PC 卡服務程式。"

#. Type: string
#. Description
#. :sl2:
#: ../hw-detect.templates:7001
msgid "PCMCIA resource range options:"
msgstr "PCMCIA 資源範圍選項:"

#. Type: string
#. Description
#. :sl2:
#: ../hw-detect.templates:7001
msgid ""
"Some PCMCIA hardware needs special resource configuration options in order "
"to work, and can cause the computer to freeze otherwise. For example, some "
"Dell laptops need \"exclude port 0x800-0x8ff\" to be specified here. These "
"options will be added to /etc/pcmcia/config.opts. See the installation "
"manual or the PCMCIA HOWTO for more information."
msgstr ""
"有些 PCMCIA 硬體需要在設置了特定的資源選項後才能運作，否則很可能會導致電腦失"
"去回應。比如說，有些 Dell 的筆記型電腦就需要在這裡指定為 \"exclude port "
"0x800-0x8ff\"。這些特定的選項將會寫入 /etc/pcmcia/config.opts 中。請查閱安裝"
"手冊或是 PCMCIA HOWTO 來取得更多的詳細訊息。"

#. Type: string
#. Description
#. :sl2:
#: ../hw-detect.templates:7001
msgid "For most hardware, you do not need to specify anything here."
msgstr "對於大多數的硬體而言，您並不需要在此進行任何設定。"

#. Type: error
#. Description
#. :sl2:
#: ../hw-detect.templates:9001
msgid "Error while running '${CMD_LINE_PARAM}'"
msgstr "在執行 ${CMD_LINE_PARAM} 時發生錯誤"

#. Type: boolean
#. Description
#. :sl2:
#: ../hw-detect.templates:10001
msgid "Load missing drivers from removable media?"
msgstr "是否要從可移除裝置中載入欠缺的驅動程式？"

#. Type: boolean
#. Description
#. :sl2:
#: ../hw-detect.templates:10001
msgid ""
"A driver for your hardware is not available. You may need to load drivers "
"from removable media, such as a USB stick, or driver floppy."
msgstr ""
"未能找到適合您的硬體的驅動程式。您也許得要從可移除裝置，像是 USB 隨身碟或是磁"
"碟片中載入這些驅動程式。"

#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../hw-detect.templates:10001 ../hw-detect.templates:11001
msgid "If you have such media available now, insert it, and continue."
msgstr "如果您手上已經有這麼一個裝置，請將其插入並繼續進行。"

#. Type: boolean
#. Description
#. :sl2:
#: ../hw-detect.templates:11001
msgid "Load missing firmware from removable media?"
msgstr "是否要從可移除裝置中載入欠缺的韌體？"

#. Type: boolean
#. Description
#. :sl2:
#: ../hw-detect.templates:11001
msgid ""
"Some of your hardware needs non-free firmware files to operate. The firmware "
"can be loaded from removable media, such as a USB stick or floppy."
msgstr ""
"您部份的硬體需要一些 non-free 的韌體才能正常運作。這些韌體可從可移除裝置，像"
"是 USB 隨身碟或是磁碟片中載入。"

#. Type: boolean
#. Description
#. :sl2:
#: ../hw-detect.templates:11001
msgid "The missing firmware files are: ${FILES}"
msgstr "欠缺的韌體檔是: ${FILES}"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:6001
msgid ""
"${iface} is a wireless network interface. Please enter the name (the ESSID) "
"of the wireless network you would like ${iface} to use. If you would like to "
"use any available network, leave this field blank."
msgstr ""
"${iface} 是一個無線網路的介面。請輸入 ${iface} 所要使用的無線網路的名稱 "
"(ESSID)。如果您想使用任何可用的網路，直接在欄位中留白即可。"

#. Type: select
#. Description
#. :sl2:
#: ../netcfg-common.templates:8002
msgid "Wireless network type for ${iface}:"
msgstr "${iface} 的無線網路類型:"

#. Type: select
#. Description
#. :sl2:
#: ../netcfg-common.templates:8002
msgid ""
"Choose WEP/Open if the network is open or secured with WEP. Choose WPA/WPA2 "
"if the network is protected with WPA/WPA2 PSK (Pre-Shared Key)."
msgstr ""
"如果這個網路是開放網路或是 WEP 加密的網路，請選擇 WEP/開放網路。如果這個網路"
"是 WPA/WPA2 PSK (預先共用金鑰) 加密網路，請選擇 WPA/WPA2。"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:9001
msgid "WEP key for wireless device ${iface}:"
msgstr "無線裝置 ${iface} 的 WEP 密鑰:"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:9001
msgid ""
"If applicable, please enter the WEP security key for the wireless device "
"${iface}. There are two ways to do this:"
msgstr "若有需要，請輸入無線裝置 ${iface} 裝置的 WEP 安全密鑰。輸入方式有兩種:"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:9001
msgid ""
"If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', "
"or 'nnnnnnnn', where n is a number, just enter it as it is into this field."
msgstr ""
"如果您的 WEP 密鑰使用的是 nnnn-nnnn-nn、nn:nn:nn:nn:nn:nn:nn:nn 或 nnnnnnnn "
"(其中的 n 是數字) 這種格式的話，請在欄位中依原樣直接輸入即可。"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:9001
msgid ""
"If your WEP key is in the format of a passphrase, prefix it with "
"'s:' (without quotes)."
msgstr ""
"如果您的 WEP 密鑰使用的格式是密語 (一串文字) 的話，請在前面加上 's:' (不含引"
"號)。"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:9001
msgid ""
"Of course, if there is no WEP key for your wireless network, leave this "
"field blank."
msgstr "當然，如果您的無線網路並不使用 WEP 密鑰，在欄位中留白即可。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:10001
msgid "Invalid WEP key"
msgstr "不正確的 WEP 密鑰"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:10001
msgid ""
"The WEP key '${wepkey}' is invalid. Please refer to the instructions on the "
"next screen carefully on how to enter your WEP key correctly, and try again."
msgstr ""
"這個 WEP 密鑰 '${wepkey}' 並不正確。請仔細參考下一個畫面裡的說明來了解如何正"
"確得輸入 WEP 密鑰，然後再試一次。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:11001
msgid "Invalid passphrase"
msgstr "不正確的密語"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:11001
msgid ""
"The WPA/WPA2 PSK passphrase was either too long (more than 64 characters) or "
"too short (less than 8 characters)."
msgstr "此 WPA/WPA2 PSK 密語太長 (超過 64 個字元) 或太短 (少於 8 個字元)。"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:12001
msgid "WPA/WPA2 passphrase for wireless device ${iface}:"
msgstr "無線裝置 ${iface} WPA/WPA2 密語:"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-common.templates:12001
msgid ""
"Enter the passphrase for WPA/WPA2 PSK authentication. This should be the "
"passphrase defined for the wireless network you are trying to use."
msgstr "請輸入 WPA/WPA2 PSK 的密語，此應為您嘗試連線的無線網路的密語。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:13001
msgid "Invalid ESSID"
msgstr "不正確的 ESSID"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:13001
msgid ""
"The ESSID \"${essid}\" is invalid. ESSIDs may only be up to ${max_essid_len} "
"characters, but may contain all kinds of characters."
msgstr ""
"這個 ESSID ${essid} 無效。ESSID 最多 ${max_essid_len} 個字元，可用任一字元。"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:14001
msgid "Attempting to exchange keys with the access point..."
msgstr "正在嘗試與無線網路基地台交換金鑰……"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:16001
msgid "WPA/WPA2 connection succeeded"
msgstr "WPA/WPA2 連線成功"

#. Type: note
#. Description
#. :sl2:
#: ../netcfg-common.templates:17001
msgid "Failure of key exchange and association"
msgstr "交換金鑰與組合失敗"

#. Type: note
#. Description
#. :sl2:
#: ../netcfg-common.templates:17001
msgid ""
"The exchange of keys and association with the access point failed. Please "
"check the WPA/WPA2 parameters you provided."
msgstr "與無線網路基地台交換金鑰與組合失敗。請檢查您提供的 WPA/WPA2 參數。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:20001
msgid "Invalid hostname"
msgstr "不正確的主機名稱"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:20001
msgid "The name \"${hostname}\" is invalid."
msgstr "\"${hostname}\" 這個名稱並不正確。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:20001
msgid ""
"A valid hostname may contain only the numbers 0-9, upper and lowercase "
"letters (A-Z and a-z), and the minus sign. It must be at most "
"${maxhostnamelen} characters long, and may not begin or end with a minus "
"sign."
msgstr ""
"正確的主機名稱應當只包含了 數字 0-9、小寫字母 a-z 和 減號，最多為 "
"${maxhostnamelen} 個字元，且不能以減號開頭或結尾。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:21001
msgid "Error"
msgstr "錯誤"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:21001
msgid ""
"An error occurred and the network configuration process has been aborted. "
"You may retry it from the installation main menu."
msgstr "發生錯誤，網路設定程序已被中止。您可以從安裝程序主選單重新嘗試。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:22001
msgid "No network interfaces detected"
msgstr "探測不到任何網路介面"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:22001
msgid ""
"No network interfaces were found. The installation system was unable to find "
"a network device."
msgstr "探測不到任何的網路介面。安裝系統無法找到網路裝置。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-common.templates:22001
msgid ""
"You may need to load a specific module for your network card, if you have "
"one. For this, go back to the network hardware detection step."
msgstr ""
"您可能得替您的網路卡載入某個專用的模組，如果您手上有的話。請返回至網路硬體裝"
"置偵測步驟來進行這個動作。"

#. Type: note
#. Description
#. A "kill switch" is a physical switch found on some network cards that
#. disables the card.
#. :sl2:
#: ../netcfg-common.templates:23001
msgid "Kill switch enabled on ${iface}"
msgstr "在 ${iface} 上啟用了禁用開關 (kill switch)"

#. Type: note
#. Description
#. A "kill switch" is a physical switch found on some network cards that
#. disables the card.
#. :sl2:
#: ../netcfg-common.templates:23001
msgid ""
"${iface} appears to have been disabled by means of a physical \"kill switch"
"\". If you intend to use this interface, please switch it on before "
"continuing."
msgstr ""
"${iface} 似乎被一種硬體的 \"禁用開關\" (kill switch) 給強制關閉了。如果您想要"
"使用這個網路介面，請在繼續進行之前將它打開。"

#. Type: select
#. Choices
#. :sl2:
#. Note to translators : Please keep your translations of each choice
#. below the 65 columns limit (which means 65 characters for most languages)
#. Choices MUST be separated by commas
#. You MUST use standard commas not special commas for your language
#. You MUST NOT use commas inside choices
#: ../netcfg-common.templates:24001
msgid "Infrastructure (Managed) network"
msgstr "共用 (Managed) 網路"

#. Type: select
#. Choices
#. :sl2:
#. Note to translators : Please keep your translations of each choice
#. below the 65 columns limit (which means 65 characters for most languages)
#. Choices MUST be separated by commas
#. You MUST use standard commas not special commas for your language
#. You MUST NOT use commas inside choices
#: ../netcfg-common.templates:24001
msgid "Ad-hoc network (Peer to peer)"
msgstr "Ad-hoc 網路 (點對點)"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:25001
msgid "Wireless network configuration"
msgstr "無線網路設定"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:26001
msgid "Searching for wireless access points..."
msgstr "正在尋找無線基地台……"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:30001
msgid "<none>"
msgstr "<無>"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:31001
msgid "Wireless ethernet (802.11x)"
msgstr "無線網路卡 (802.11x)"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:32001
msgid "wireless"
msgstr "無線網路"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:33001
msgid "Ethernet"
msgstr "網路卡"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:34001
msgid "Token Ring"
msgstr "Token Ring"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:35001
msgid "USB net"
msgstr "USB net"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:37001
msgid "Serial-line IP"
msgstr "串列線 IP (SLIP)"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:38001
msgid "Parallel-port IP"
msgstr "並行埠 IP (PLIP)"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:39001
msgid "Point-to-Point Protocol"
msgstr "點對點通訊協定 (PPP)"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:40001
msgid "IPv6-in-IPv4"
msgstr "IPv6-in-IPv4"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:41001
msgid "ISDN Point-to-Point Protocol"
msgstr "ISDN 點對點通訊協定"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:42001
msgid "Channel-to-channel"
msgstr "Channel-to-channel"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:43001
msgid "Real channel-to-channel"
msgstr "Real channel-to-channel"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:45001
msgid "Inter-user communication vehicle"
msgstr "Inter-user communication vehicle"

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-common.templates:46001
msgid "Unknown interface"
msgstr "不明介面"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:5001
msgid "No DHCP client found"
msgstr "找不到 DHCP 用戶端程式"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:5001
msgid "No DHCP client was found. This package requires pump or dhcp-client."
msgstr "找不到 DHCP 用戶端程式。欠缺了 pump 或 dhcp-client 套件。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:5001
msgid "The DHCP configuration process has been aborted."
msgstr "DHCP 的設定程序已被中止。"

#. Type: boolean
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:8001
msgid "Continue without a default route?"
msgstr "是否不使用 Default Route 並繼續進行？"

#. Type: boolean
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:8001
msgid ""
"The network autoconfiguration was successful. However, no default route was "
"set: the system does not know how to communicate with hosts on the Internet. "
"This will make it impossible to continue with the installation unless you "
"have the first installation CD-ROM, a 'Netinst' CD-ROM, or packages "
"available on the local network."
msgstr ""
"網路自動設定成功了。然而，卻沒有指定預設的路由 (Default Route): 系統無法得知"
"該如何才能和網際網路上的主機進行連線。除非您手上有著第一張安裝光"
"碟、'Netinst' 光碟、或是有辨法在您區域網路中取得所需套件，否則安裝作業將會無"
"法繼續進行。"

#. Type: boolean
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:8001
msgid ""
"If you are unsure, you should not continue without a default route: contact "
"your local network administrator about this problem."
msgstr ""
"若不確定，您不該在沒有設定 Default Route 的情況下繼續進行；請向您區域網路的管"
"理員反應這個問題。"

#. Type: text
#. Description
#. IPv6
#. :sl2:
#. Type: text
#. Description
#. IPv6
#. :sl2:
#: ../netcfg-dhcp.templates:12001 ../netcfg-dhcp.templates:14001
msgid "Attempting IPv6 autoconfiguration..."
msgstr "嚐試 IPv6 自動設定..."

#. Type: text
#. Description
#. IPv6
#. :sl2:
#: ../netcfg-dhcp.templates:13001
msgid "Waiting for link-local address..."
msgstr "等待 link-local 位址..."

#. Type: text
#. Description
#. :sl2:
#: ../netcfg-dhcp.templates:16001
msgid "Configuring the network with DHCPv6"
msgstr "用 DHCPv6 設定網路"

#. Type: error
#. Description
#. IPv6
#. :sl2:
#: ../netcfg-static.templates:2001
msgid "Malformed IP address"
msgstr "IP 位址格式有誤"

#. Type: error
#. Description
#. IPv6
#. :sl2:
#: ../netcfg-static.templates:2001
msgid ""
"The IP address you provided is malformed. It should be in the form x.x.x.x "
"where each 'x' is no larger than 255 (an IPv4 address), or a sequence of "
"blocks of hexadecimal digits separated by colons (an IPv6 address). Please "
"try again."
msgstr ""
"您的 IP 位址格式有誤。它的格式應該像是 x.x.x.x，每一個 x 都不可以超過 "
"255（IPv4 位址），或是由冒號隔開的十六進位字元詞組（IPv6 位址）。請更正。"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-static.templates:3001
msgid "Point-to-point address:"
msgstr "點對點位址:"

#. Type: string
#. Description
#. :sl2:
#: ../netcfg-static.templates:3001
msgid ""
"The point-to-point address is used to determine the other endpoint of the "
"point to point network.  Consult your network administrator if you do not "
"know the value.  The point-to-point address should be entered as four "
"numbers separated by periods."
msgstr ""
"點對點位址 (Point-to-Point Address) 是用來決定點對點網路的另一個端點。如果您"
"不知道位址，請洽詢您的網路管理員。在此所輸入的點對點位址應該是由四個由句點分"
"隔的數字所組成。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-static.templates:6001
msgid "Unreachable gateway"
msgstr "無法通連的閘道"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-static.templates:6001
msgid "The gateway address you entered is unreachable."
msgstr "您所輸入的閘道位址是無法通連的。"

#. Type: error
#. Description
#. :sl2:
#: ../netcfg-static.templates:6001
msgid ""
"You may have made an error entering your IP address, netmask and/or gateway."
msgstr "也許您所輸入的 IP 位址、網路遮罩 和/或 閘道 有誤。"

#. Type: select
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:3001
msgid "Debian version to install:"
msgstr "所要安裝的 Debian 版本:"

#. Type: select
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:3001
msgid ""
"Debian comes in several flavors. Stable is well-tested and rarely changes. "
"Unstable is untested and frequently changing. Testing is a middle ground, "
"that receives many of the new versions from unstable if they are not too "
"buggy."
msgstr ""
"Debian 同時存在了多種類別。Stable 是經過嚴密測試，很少更動的版本。Unstable 是"
"沒有經過什麼測試，變動非常頻繁的版本。Testing 則是位於中間地帶，通常是從 "
"Unstable 中接收一些沒太多問題的新版套件。"

#. Type: select
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:3001
msgid "Only flavors available on the selected mirror are listed."
msgstr "只列出指定的鏡像站上有提供的類別。"

#. Type: boolean
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:7001
msgid "Go back and try a different mirror?"
msgstr "是否返回並試著使用另一個鏡像站？"

#. Type: boolean
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:7001
msgid ""
"The specified (default) Debian version (${RELEASE}) is not available from "
"the selected mirror. It is possible to continue and select a different "
"release for your installation, but normally you should go back and select a "
"different mirror that does support the correct version."
msgstr ""
"無法由指定的鏡像站上取得指定的 (預設) Debian 版本 (${RELEASE})。是可以繼續進"
"行並選擇一個和您安裝的不一致的發行版，但一般情況下，您應該返回並選擇使用另一"
"個支援正確版本的鏡像站。"

#. Type: error
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:8001
msgid "Bad archive mirror"
msgstr "無效的檔案鏡像站"

#. Type: error
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:8001
msgid ""
"An error has been detected while trying to use the specified Debian archive "
"mirror."
msgstr "在試圖使用指定的 Debian 檔案鏡像站時發生了錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:8001
msgid ""
"Possible reasons for the error are: incorrect mirror specified; mirror is "
"not available (possibly due to an unreliable network connection); mirror is "
"broken (for example because an invalid Release file was found); mirror does "
"not support the correct Debian version."
msgstr ""
"發生錯誤的可能原因有: 指定了不正確的鏡像站；鏡像站無法存取 (可能是因為網路連"
"線不穩定)；鏡像站己損毀 (像是因為找到了無法使用的 Release 檔)；鏡像站不支援現"
"行的 Debian 版本。"

#. Type: error
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:8001
msgid ""
"Additional details may be available in /var/log/syslog or on virtual console "
"4."
msgstr "更多的詳盡資訊可在 /var/log/syslog 或是虛擬主控台４找到。"

#. Type: error
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:8001
msgid "Please check the specified mirror or try a different one."
msgstr "請檢查所指定的鏡像站，或是換另一個試試。"

#. Type: text
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:10001
msgid "oldstable"
msgstr "oldstable"

#. Type: text
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:11001
msgid "stable"
msgstr "stable"

#. Type: text
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:12001
msgid "testing"
msgstr "testing"

#. Type: text
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates-in:13001
msgid "unstable"
msgstr "unstable"

#. Type: string
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates.http-in:5001
#: ../choose-mirror-bin.templates.ftp.base-in:3001
msgid "Debian archive mirror directory:"
msgstr "Debian 檔案鏡像站目錄:"

#. Type: string
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates.http-in:5001
#: ../choose-mirror-bin.templates.ftp.base-in:3001
msgid ""
"Please enter the directory in which the mirror of the Debian archive is "
"located."
msgstr "請輸入 Debian 檔案鏡像所在的目錄。"

#. Type: string
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates.ftp.base-in:4001
msgid "FTP proxy information (blank for none):"
msgstr "FTP Proxy 資訊 (如果沒有請留白):"

#. Type: string
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates.ftp.base-in:4001
msgid ""
"If you need to use a FTP proxy to access the outside world, enter the proxy "
"information here. Otherwise, leave this blank."
msgstr ""
"如果您需要透過 FTP Proxy 來連接外部網路，請在這裡輸入 Proxy 的資訊。否則，直"
"接留白即可。"

#. Type: select
#. Default
#. Translators, you should put here the ISO 3166 code of a country
#. which you know hosts at least one Debian FTP mirror. Please check
#. that the country really has a Debian FTP mirror before putting a
#. random value here
#.
#. First check that the country you mention here is listed in
#. http://svn.debian.org/wsvn/webwml/trunk/webwml/english/mirror/Mirrors.masterlist
#.
#. BE CAREFUL to use the TWO LETTER ISO-3166 CODE and not anything else
#.
#. You do not need to translate what's between the square brackets
#. You should even NOT put square brackets in translations:
#. msgid "US[ Default value for ftp]"
#. msgstr "FR"
#. :sl2:
#: ../choose-mirror-bin.templates.ftp.sel-in:2002
msgid "US[ Default value for ftp]"
msgstr "TW"

#. Type: select
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates.both-in:2001
msgid "Protocol for file downloads:"
msgstr "下載檔案時所使用的通訊協定:"

#. Type: select
#. Description
#. :sl2:
#: ../choose-mirror-bin.templates.both-in:2001
msgid ""
"Please select the protocol to be used for downloading files. If unsure, "
"select \"http\"; it is less prone to problems involving firewalls."
msgstr ""
"請選擇在下載檔案時所使用的通訊協定。如果不確定，請選擇 http﹔即使使用了防火"
"牆，它也很少會遇到什麼問題。"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#. :sl2:
#. #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-#
#. Type: select
#. Choices
#. :sl2:
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#: ../net-retriever.templates:1001 ../apt-setup-udeb.templates:8001
#: ../apt-mirror-setup.templates:4001
msgid "Retry"
msgstr "再次嘗試"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#. :sl2:
#. #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-#
#. Type: select
#. Choices
#. :sl2:
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#: ../net-retriever.templates:1001 ../apt-mirror-setup.templates:4001
msgid "Change mirror"
msgstr "更換鏡像站"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-#
#. Type: select
#. Description
#: ../net-retriever.templates:1002 ../apt-mirror-setup.templates:4002
msgid "Downloading a file failed:"
msgstr "在下載檔案時失敗了:"

#. Type: select
#. Description
#. :sl2:
#: ../net-retriever.templates:1002
msgid ""
"The installer failed to download a file from the mirror. This may be a "
"problem with your network, or with the mirror. You can choose to retry the "
"download, select a different mirror, or cancel and choose another "
"installation method."
msgstr ""
"安裝程式無法由鏡像站下載某些檔案。可能是您的網路或是該鏡像站出了什麼問題。您"
"可以選擇再次試著下載、選擇另一個鏡像站、或取消並改用其它的安裝方式。"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-retriever.templates:1001
msgid "Failed to copy file from CD-ROM. Retry?"
msgstr "無法由光碟片中複製檔案。是否重新嘗試？"

#. Type: boolean
#. Description
#. :sl2:
#: ../cdrom-retriever.templates:1001
msgid ""
"There was a problem reading data from the CD-ROM. Please make sure it is in "
"the drive. If retrying does not work, you should check the integrity of your "
"CD-ROM."
msgstr ""
"在從光碟片讀取資料時發生了問題，請確認該光碟是否確實放在光碟機中。如果一再重"
"試卻無法解決問題，您應該檢查這片光碟的完整性。"

#. Type: text
#. Description
#. :sl2:
#: ../media-retriever.templates:1001
msgid "Scanning removable media"
msgstr "掃瞄可移除裝置"

#. Type: text
#. Description
#. :sl2:
#: ../media-retriever.templates:2001
msgid "Cannot read removable media, or no drivers found."
msgstr "無法讀取可移除裝置，或是找不到驅動程式。"

#. Type: text
#. Description
#. :sl2:
#: ../media-retriever.templates:2001
msgid ""
"There was a problem reading data from the removable media. Please make sure "
"that the right media is present. If you continue to have trouble, your "
"removable media might be bad."
msgstr ""
"在從可移除裝置中讀取資料時發生了問題，請確認裝置中是否已放入了正確的媒體。如"
"果您還是不斷遇到問題，您的可移除裝置可能已經損壞了。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-base.templates:5001
msgid "Device in use"
msgstr "使用中的裝置"

#. Type: error
#. Description
#. :sl2:
#: ../partman-base.templates:5001
msgid ""
"No modifications can be made to the device ${DEVICE} for the following "
"reasons:"
msgstr "無法在 ${DEVICE} 裝置上進行任何修改，其原因如下:"

#. Type: error
#. Description
#. :sl2:
#: ../partman-base.templates:6001
msgid "Partition in use"
msgstr "使用中的磁碟分割"

#. Type: error
#. Description
#. :sl2:
#. This should be translated as "partition *number* ${PARTITION}"
#. In short, ${PARTITION} will indeed contain the partition
#. NUMBER and not the partition NAME
#: ../partman-base.templates:6001
msgid ""
"No modifications can be made to the partition #${PARTITION} of device "
"${DEVICE} for the following reasons:"
msgstr ""
"無法在 ${DEVICE} 裝置的第 ${PARTITION} 分割區上進行任何修改，其原因如下:"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-base.templates:10001
msgid "Continue with the installation?"
msgstr "是否繼續進行安裝？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-base.templates:10001
msgid ""
"No partition table changes and no creation of file systems have been planned."
msgstr "並沒有更動到磁碟分割表，且也沒有計劃要建立任何的檔案系統。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-base.templates:10001
msgid ""
"If you plan on using already created file systems, be aware that existing "
"files may prevent the successful installation of the base system."
msgstr ""
"如果您打算使用的是早已存在的檔案系統，請注意，已存在的檔案可能會讓 Base "
"System 的安裝作業無法順利完成。"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:13001
msgid "The following partitions are going to be formatted:"
msgstr "下列的分割區將要進行格式化:"

#. Type: text
#. Description
#. :sl2:
#. for example: "partition #6 of IDE0 master as ext3 journaling file system"
#: ../partman-base.templates:14001
msgid "partition #${PARTITION} of ${DEVICE} as ${TYPE}"
msgstr "${DEVICE} 的 #${PARTITION} 分割區，${TYPE}"

#. Type: text
#. Description
#. :sl2:
#. for devices which have no partitions
#. for example: "LVM VG Debian, LV Root as ext3 journaling file system"
#: ../partman-base.templates:15001
msgid "${DEVICE} as ${TYPE}"
msgstr "${DEVICE} 使用 ${TYPE}"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:16001
msgid "The partition tables of the following devices are changed:"
msgstr "以下裝置的磁碟分割表已有所更動:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:17001
msgid "What to do with this device:"
msgstr "要如何操作該裝置:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:18001
msgid "How to use this free space:"
msgstr "要如何運用該未使用空間:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:19001
msgid "Partition settings:"
msgstr "分割區設定:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-base.templates:19001
msgid ""
"You are editing partition #${PARTITION} of ${DEVICE}. ${OTHERINFO} "
"${DESTROYED}"
msgstr ""
"您正在編輯的是 ${DEVICE} 的 #${PARTITION} 分割區。${OTHERINFO} ${DESTROYED}"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:20001
msgid "This partition is formatted with the ${FILESYSTEM}."
msgstr "該分割區已被格式化為 ${FILESYSTEM}。"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:21001
msgid "No existing file system was detected in this partition."
msgstr "在該分割區上偵測不到任何的檔案系統。"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:22001
msgid "All data in it WILL BE DESTROYED!"
msgstr "它所包含的全部資料將會被 完-全-清-除 掉！"

#. Type: note
#. Description
#. :sl2:
#: ../partman-base.templates:23001
msgid "The partition starts from ${FROMCHS} and ends at ${TOCHS}."
msgstr "該分割區是由 ${FROMCHS} 開始﹔且於 ${TOCHS} 結束。"

#. Type: note
#. Description
#. :sl2:
#: ../partman-base.templates:24001
msgid "The free space starts from ${FROMCHS} and ends at ${TOCHS}."
msgstr "該未使用空間是由 ${FROMCHS} 開始﹔且於 ${TOCHS} 結束。"

#. Type: text
#. Description
#. :sl2:
#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:29001 ../partman-base.templates:33001
msgid "Show Cylinder/Head/Sector information"
msgstr "顯示 磁柱/磁頭/磁區 資訊"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:30001
msgid "Done setting up the partition"
msgstr "分割區設定完成"

#. Type: text
#. Description
#. :sl2:
#: ../partman-base.templates:34001
#, no-c-format
msgid "Dump partition info in %s"
msgstr "將分割區資訊傾印至 %s"

#. #-#-#-#-#  templates.pot (partman-auto)  #-#-#-#-#
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-auto.templates:3001 ../partman-auto.templates:4001
#: ../partman-auto-lvm.templates:4001
msgid "Failed to partition the selected disk"
msgstr "無法分割所選定的磁碟。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-auto.templates:3001
msgid ""
"This probably happened because the selected disk or free space is too small "
"to be automatically partitioned."
msgstr ""
"這或許是因為所指定的磁碟或未使用空間太小了，以至於無法進行自動磁碟分割。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-auto.templates:4001
msgid ""
"This probably happened because there are too many (primary) partitions in "
"the partition table."
msgstr "這或許是因為在磁碟分割表中有過多的 (主) 分割區。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-auto.templates:10001
msgid "Unusable free space"
msgstr "無法使用的未使用空間"

#. Type: error
#. Description
#. :sl2:
#: ../partman-auto.templates:10001
msgid ""
"Partitioning failed because the chosen free space may not be used. There are "
"probably too many (primary) partitions in the partition table."
msgstr ""
"也許是因為所指定的未使用空間無法使用，以致於無法分割該磁碟。在磁碟分割表中可"
"能有過多的 (主) 分割區。"

#. Type: text
#. Description
#. :sl2:
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:22001
msgid "Small-disk (< 1GB) partitioning scheme"
msgstr "小型磁碟 (< 1GB) 分割方案"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:1001
msgid "Go back to the menu?"
msgstr "是否返回選單？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:1001
msgid "No file system is specified for partition #${PARTITION} of ${DEVICE}."
msgstr "尚未替 ${DEVICE} 裝置的第 ${PARTITION} 分割區指定檔案系統。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:1001
msgid ""
"If you do not go back to the partitioning menu and assign a file system to "
"this partition, it won't be used at all."
msgstr ""
"如果您不返回磁碟分割選單並為該分割區指派一個檔案系統，將不能使用此分割區。"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:2001
msgid "do not use the partition"
msgstr "不使用此分割區"

#. Type: text
#. Description
#. up to 25 character positions
#. :sl2:
#: ../partman-basicmethods.templates:3001
msgid "Format the partition:"
msgstr "格式化此分割區:"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:4001
msgid "yes, format it"
msgstr "是，將它格式化"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:5001
msgid "no, keep existing data"
msgstr "否，保留現有資料"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:6001
msgid "do not use"
msgstr "不使用"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:8001
msgid "format the partition"
msgstr "格式化此分割區"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicmethods.templates:10001
msgid "keep and use the existing data"
msgstr "保持並沿用其現有的資料"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:1001
msgid "Resizing partition..."
msgstr "正在改變分割區大小……"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:3001
msgid "The resize operation is impossible"
msgstr "無法調整容量大小"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:3001
msgid "Because of an unknown reason it is impossible to resize this partition."
msgstr "由於不明因素，無法調整該分割區的容量大小。"

#. #-#-#-#-#  templates.pot (partman-partitioning)  #-#-#-#-#
#. Type: error
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (grub-installer)  #-#-#-#-#
#. Type: error
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (partman-lvm)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-partitioning.templates:3001 ../clock-setup.templates:9001
#: ../bootstrap-base.templates:4001 ../bootstrap-base.templates:5001
#: ../bootstrap-base.templates:6001 ../bootstrap-base.templates:7001
#: ../bootstrap-base.templates:11001 ../bootstrap-base.templates:16001
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
#: ../network-console.templates:10001 ../partman-iscsi.templates:12001
#: ../lvmcfg-utils.templates:24001 ../lvmcfg-utils.templates:32001
#: ../lvmcfg-utils.templates:37001 ../partman-lvm.templates:32001
#: ../partman-lvm.templates:46001 ../partman-lvm.templates:53001
#: ../partman-lvm.templates:57001 ../partman-lvm.templates:60001
#: ../partman-auto-lvm.templates:7001 ../partman-auto-raid.templates:1001
msgid "Check /var/log/syslog or see virtual console 4 for the details."
msgstr "請查看 /var/log/syslog 或是第四個虛擬主控台來獲得詳細訊息。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:4001
msgid "Write previous changes to disk and continue?"
msgstr "是否要將這些變更寫入磁碟中並繼續進行？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:4001
msgid ""
"Before you can select a new partition size, any previous changes have to be "
"written to disk."
msgstr "在能讓您選擇新的磁碟大小之前，必須先把變更寫入磁碟之中。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:4001
msgid "You cannot undo this operation."
msgstr "這些操作將無法還原。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:4001
msgid "Please note that the resize operation may take a long time."
msgstr "請注意，這個調整容量大小的動作可能會花上很長的時間。"

#. Type: string
#. Description
#. :sl2:
#. Type: string
#. Description
#. :sl2:
#: ../partman-partitioning.templates:5001
#: ../partman-partitioning.templates:10001
msgid "New partition size:"
msgstr "新分割區的容量:"

#. Type: string
#. Description
#. :sl2:
#: ../partman-partitioning.templates:5001
msgid ""
"The minimum size for this partition is ${MINSIZE} (or ${PERCENT}) and its "
"maximum size is ${MAXSIZE}."
msgstr ""
"這個分割區的容量最小為 ${MINSIZE} (或 ${PERCENT})﹔而最大為 ${MAXSIZE}。"

#. Type: string
#. Description
#. :sl2:
#. Type: string
#. Description
#. :sl2:
#: ../partman-partitioning.templates:5001
#: ../partman-partitioning.templates:10001
#, no-c-format
msgid ""
"Hint: \"max\" can be used as a shortcut to specify the maximum size, or "
"enter a percentage (e.g. \"20%\") to use that percentage of the maximum size."
msgstr ""
"提示: 可以使用 \"max\" 來直接表示使用最大容量；或輸入一個百分比 (像是 \"20%"
"\") 來表示使用最大容量的百分之多少。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:6001
msgid "The size entered is invalid"
msgstr "您所輸入的大小並不正確"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:6001
msgid ""
"The size you entered was not understood. Please enter a positive integer "
"size followed by an optional unit of measure (e.g. \"200 GB\"). The default "
"unit of measure is the megabyte."
msgstr ""
"無法解析您所輸入的大小。請輸入一個正整數，後面可再加一個容量單位，(例如: "
"\"200GB\")。預設的容量單為為 MB。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:7001
msgid "The size entered is too large"
msgstr "所輸入的大小太大了"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:7001
msgid ""
"The size you entered is larger than the maximum size of the partition. "
"Please enter a smaller size to continue."
msgstr ""
"您所輸入的大小比該分割區的最高容量還大。請輸入一個比較小的數字以繼續進行。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:8001
msgid "The size entered is too small"
msgstr "您所輸入的數字太小了"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:8001
msgid ""
"The size you entered is smaller than the minimum size of the partition. "
"Please enter a larger size to continue."
msgstr ""
"您所輸入的大小比該分割區的最小容量還小。請輸入一個比較大的數字以繼續進行。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:9001
msgid "Resize operation failure"
msgstr "容量大小調整作業失敗了"

#. #-#-#-#-#  templates.pot (partman-partitioning)  #-#-#-#-#
#. Type: error
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../partman-partitioning.templates:9001 ../partman-md.templates:21001
msgid "An error occurred while writing the changes to the storage devices."
msgstr "在將變更寫入儲存裝置時發生錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:9001
msgid "The resize operation has been aborted."
msgstr "容量大小調整作業已被中止。"

#. Type: string
#. Description
#. :sl2:
#: ../partman-partitioning.templates:10001
msgid "The maximum size for this partition is ${MAXSIZE}."
msgstr "這個分割區的最大容量為 ${MAXSIZE}。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-partitioning.templates:11001
msgid "Invalid size"
msgstr "不正確的容量"

#. Type: multiselect
#. Description
#. :sl2:
#: ../partman-partitioning.templates:14001
msgid "Flags for the new partition:"
msgstr "新分割區的選項:"

#. Type: string
#. Description
#. :sl2:
#: ../partman-partitioning.templates:15001
msgid "Partition name:"
msgstr "分割區名稱:"

#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:16001
#: ../partman-partitioning.templates:17001
msgid "Continue with partitioning?"
msgstr "是否繼續磁碟分割作業？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:16001
msgid ""
"This partitioner doesn't have information about the default type of the "
"partition tables on your architecture.  Please send an e-mail message to "
"debian-boot@lists.debian.org with information."
msgstr ""
"這個磁碟分割程式並沒有提供有關您的硬體架構的磁碟分割表所使用的預設格式的相關"
"資訊。請把相關資訊以電子郵件寄給 debian-boot@lists.debian.org。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:16001
msgid ""
"Please note that if the type of the partition table is unsupported by "
"libparted, then this partitioner will not work properly."
msgstr ""
"請注意，如果這個磁碟分割表的格式並不被 libparted 所支援的話，這個磁碟分割程式"
"將無法正常運作。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:17001
msgid ""
"This partitioner is based on the library libparted which doesn't have "
"support for the partition tables used on your architecture.  It is strongly "
"recommended that you exit this partitioner."
msgstr ""
"這個基於 libparted 函式庫的磁碟分割程式並不支援您的硬體架構所使用的磁碟分割"
"表。在此強烈建議您退出這個磁碟分割程式。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:17001
msgid ""
"If you can, please help to add support for your partition table type to "
"libparted."
msgstr "如果可以，請您協助讓 libparted 也能夠支援您的磁碟分割表。"

#. Type: select
#. Description
#. :sl2:
#: ../partman-partitioning.templates:19001
msgid "Partition table type:"
msgstr "分割表格式:"

#. Type: select
#. Description
#. :sl2:
#: ../partman-partitioning.templates:19001
msgid "Select the type of partition table to use."
msgstr "請選擇分割表所使用的格式。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:20001
msgid "Create new empty partition table on this device?"
msgstr "是否在該裝置上建立全新的空白磁碟分割表？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:20001
msgid ""
"You have selected an entire device to partition. If you proceed with "
"creating a new partition table on the device, then all current partitions "
"will be removed."
msgstr ""
"您已選取了整個裝置來進行磁碟分割。如果您接下來又在該裝置上建立了一個新的磁碟"
"分割表，裡面原有的分割區將會全部被清掉。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:20001
msgid "Note that you will be able to undo this operation later if you wish."
msgstr "請注意，若您有意，您還是可以在稍後取消這些操作。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:21001
msgid "Write a new empty partition table?"
msgstr "是否要寫入一個全新的空白磁碟分割表？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:21001
msgid ""
"Because of limitations in the current implementation of the Sun partition "
"tables in libparted, the newly created partition table has to be written to "
"the disk immediately."
msgstr ""
"由於目前 libparted 對於 Sun 的磁碟分割表實作上的限制，新建立的磁碟分割表必須"
"立即寫入磁碟之中。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:21001
msgid ""
"You will NOT be able to undo this operation later and all existing data on "
"the disk will be irreversibly removed."
msgstr ""
"您將 無 法 在稍後再取消這些操作，且所有存放在磁碟裡的資料將會被完完全全地清除"
"掉。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:21001
msgid ""
"Confirm whether you actually want to create a new partition table and write "
"it to disk."
msgstr "請確認您是否真的要建立一個新的磁碟分割表並將其寫入磁碟。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:22001
msgid "Are you sure you want a bootable logical partition?"
msgstr "您確定您要用的是可開機的邏輯分割區？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:22001
msgid ""
"You are trying to set the bootable flag on a logical partition. The bootable "
"flag is generally only useful on primary partitions, so setting it on "
"logical partitions is normally discouraged. Some BIOS versions are known to "
"fail to boot if there is no bootable primary partition."
msgstr ""
"您正試著將某個邏輯分割區設定為可開機。但可開機設定一般只能用於主分割區，通常"
"並不會在邏輯分割區上如此設定。已知有些版本的 BIOS 若找不到可開機的主分割區的"
"話將會無法開機。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-partitioning.templates:22001
msgid ""
"However, if you are sure that your BIOS does not have this problem, or if "
"you are using a custom boot manager that pays attention to bootable logical "
"partitions, then setting this flag may make sense."
msgstr ""
"然而，如果您確定您的 BIOS 沒有這個問題的話，或者您正在使用的是一個可以用邏輯"
"分割區來進行開機的特殊開機程式的話，那麼您也許可以如此設定。"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:23001
msgid "Set the partition flags"
msgstr "設定分割區的選項"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:24001
msgid "Name:"
msgstr "名稱:"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:25001
msgid "Bootable flag:"
msgstr "\"可開機\" 設定"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:26001
msgid "on"
msgstr "開"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:27001
msgid "off"
msgstr "關"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:28001
msgid "Resize the partition (currently ${SIZE})"
msgstr "調整該分割區的大小 (目前為 ${SIZE})"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:29001
msgid "Delete the partition"
msgstr "刪除此分割區"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:30001
msgid "Create a new partition"
msgstr "建立新分割區"

#. Type: text
#. Description
#. :sl2:
#: ../partman-partitioning.templates:31001
msgid "Create a new empty partition table on this device"
msgstr "在此裝置上建立全新的空白磁碟分割表"

#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:6001
#: ../partman-basicfilesystems.templates:7001
msgid "Go back to the menu and correct errors?"
msgstr "是否返回選單並更正錯誤？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:6001
msgid ""
"The test of the file system with type ${TYPE} in partition #${PARTITION} of "
"${DEVICE} found uncorrected errors."
msgstr ""
"在 ${DEVICE} 裝置上第 ${PARTITION} 分割區的 ${TYPE} 檔案系統上所進行的測試中"
"發現了未修正的錯誤。"

#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:6001
#: ../partman-basicfilesystems.templates:7001
msgid ""
"If you do not go back to the partitioning menu and correct these errors, the "
"partition will be used as is."
msgstr "如果您不返回磁碟分割選單並修正這些錯誤，將不能使用此分割區。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:7001
msgid ""
"The test of the swap space in partition #${PARTITION} of ${DEVICE} found "
"uncorrected errors."
msgstr ""
"在 ${DEVICE} 裝置上第 ${PARTITION} 分割區的置換空間上所進行的測試中發現了未修"
"正的錯誤。"

#. #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:8001
#: ../partman-basicfilesystems.templates:11001 ../partman-ext3.templates:10001
msgid "Do you want to return to the partitioning menu?"
msgstr "您是否想返回磁碟分割選單？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:8001
msgid ""
"You have not selected any partitions for use as swap space. Enabling swap "
"space is recommended so that the system can make better use of the available "
"physical memory, and so that it behaves better when physical memory is "
"scarce. You may experience installation problems if you do not have enough "
"physical memory."
msgstr ""
"您未將任何的分割區指定做為置換空間。建議啟用置換空間來讓系統能更加有效得使用"
"現有的實體記憶體，也能讓系統在記憶體不是那麼足夠時能夠運作得更好。若您沒有足"
"夠的實體記憶體，您在安裝的過程中很可能會遭遇到問題。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:8001
msgid ""
"If you do not go back to the partitioning menu and assign a swap partition, "
"the installation will continue without swap space."
msgstr ""
"如果您不返回磁碟分割選單並指派一個 Swap (置換空間) 分割區，安裝程式將會在沒有"
"置換空間的狀況下繼續進行。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:9001
msgid "Failed to create a file system"
msgstr "無法建立檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:9001
msgid ""
"The ${TYPE} file system creation in partition #${PARTITION} of ${DEVICE} "
"failed."
msgstr ""
"在建立 ${DEVICE} 裝置的第 ${PARTITION} 分割區的 ${TYPE} 檔案系統時失敗了。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:10001
msgid "Failed to create a swap space"
msgstr "無法建立置換空間"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:10001
msgid ""
"The creation of swap space in partition #${PARTITION} of ${DEVICE} failed."
msgstr "在建立 ${DEVICE} 裝置的第 ${PARTITION} 分割區的置換空間時失敗了。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:11001
msgid ""
"No mount point is assigned for the ${FILESYSTEM} file system in partition #"
"${PARTITION} of ${DEVICE}."
msgstr ""
"並沒有為 ${DEVICE} 裝置上第 ${PARTITION} 分割區的 ${FILESYSTEM} 檔案系統指派"
"掛載點。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:11001
msgid ""
"If you do not go back to the partitioning menu and assign a mount point from "
"there, this partition will not be used at all."
msgstr "如果您不返回磁碟分割選單並指派一個掛載點，將不能使用此分割區。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:12001
msgid "Invalid file system for this mount point"
msgstr "這個掛載點無法使用這種檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:12001
msgid ""
"The file system type ${FILESYSTEM} cannot be mounted on ${MOUNTPOINT}, "
"because it is not a fully-functional Unix file system. Please choose a "
"different file system, such as ${EXT2}."
msgstr ""
"無法將 ${FILESYSTEM} 格式的檔案系統掛載在 ${MOUNTPOINT} 上，因為它並不是一個"
"功能齊全的 Unix 檔案系統。請選擇另一種檔案系統，像是 ${EXT2}。"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/ - the root file system"
msgstr "/ - root 檔案系統"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/boot - static files of the boot loader"
msgstr "/boot - 開機程式所使用的靜態檔案"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/home - user home directories"
msgstr "/home - 使用者的主目錄"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/tmp - temporary files"
msgstr "/tmp - 暫存檔"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/usr - static data"
msgstr "/usr - 靜態資料"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/var - variable data"
msgstr "/var - 動態資料"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/srv - data for services provided by this system"
msgstr "/srv - 此系統所提供的服務的資料"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/opt - add-on application software packages"
msgstr "/opt - 額外的應用程式套件"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
msgid "/usr/local - local hierarchy"
msgstr "/usr/local - 本機的目錄結構"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#. Type: select
#. Choices
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
#: ../partman-basicfilesystems.templates:14001
msgid "Enter manually"
msgstr "手動輸入"

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. :sl2:
#. Type: select
#. Choices
#. :sl2:
#: ../partman-basicfilesystems.templates:13001
#: ../partman-basicfilesystems.templates:14001
msgid "Do not mount it"
msgstr "不掛載此分割區"

#. Type: select
#. Description
#. Type: select
#. Description
#. Type: string
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:13002
#: ../partman-basicfilesystems.templates:14002
#: ../partman-basicfilesystems.templates:15001
msgid "Mount point for this partition:"
msgstr "此分割區的掛載點:"

#. Type: select
#. Choices
#. :sl2:
#: ../partman-basicfilesystems.templates:14001
msgid "/dos"
msgstr "/dos"

#. Type: select
#. Choices
#. :sl2:
#: ../partman-basicfilesystems.templates:14001
msgid "/windows"
msgstr "/windows"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:16001
msgid "Invalid mount point"
msgstr "不正確的掛載點"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:16001
msgid "The mount point you entered is invalid."
msgstr "您所輸入的掛載點並不正確。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:16001
msgid "Mount points must start with \"/\". They cannot contain spaces."
msgstr "掛載點必須以 / 開頭，且不能包含空格。"

#. Type: string
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:17001
msgid "Label for the file system in this partition:"
msgstr "此分割區的檔案系統的磁碟標籤:"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:18001
msgid "Format the swap area:"
msgstr "格式化該置換空間:"

#. #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-#
#. Type: text
#. Description
#. In the following context: "Format the partition: yes"
#. :sl2:
#. #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#: ../partman-basicfilesystems.templates:19001
#: ../partman-crypto.templates:20001
msgid "yes"
msgstr "是"

#. #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-#
#. Type: text
#. Description
#. In the following context: "Format the partition: no"
#. :sl2:
#. #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-#
#. Type: text
#. Description
#. :sl3:
#: ../partman-basicfilesystems.templates:20001
#: ../partman-crypto.templates:19001
msgid "no"
msgstr "否"

#. Type: text
#. Description
#. label of file system
#. :sl2:
#: ../partman-basicfilesystems.templates:21001
msgid "Label:"
msgstr "磁碟標籤:"

#. Type: text
#. Description
#. for partman-basicfilesystems: in the following context: "Label: none"
#. :sl2:
#: ../partman-basicfilesystems.templates:22001
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Label:\" ]"
msgstr "無"

#. Type: text
#. Description
#. Up to 24 character positions
#. :sl2:
#: ../partman-basicfilesystems.templates:23001
msgid "Reserved blocks:"
msgstr "保留檔案區塊:"

#. Type: string
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:24001
msgid "Percentage of the file system blocks reserved for the super-user:"
msgstr "在檔案系統中替管理者所保留的檔案區塊之百分比:"

#. Type: text
#. Description
#. :sl2:
#. Up to 25 character positions
#: ../partman-basicfilesystems.templates:25001
msgid "Typical usage:"
msgstr "主要用途:"

#. Type: text
#. Description
#. :sl2:
#. In the following context: "Typical usage: standard"
#: ../partman-basicfilesystems.templates:26001
msgid "standard"
msgstr "standard"

#. Type: text
#. Description
#. This is an item in the menu "Partition settings"
#. :sl2:
#: ../partman-basicfilesystems.templates:28001
msgid "Mount point:"
msgstr "掛載點:"

#. Type: text
#. Description
#. :sl2:
#. In the following context: "Mount point: none"
#: ../partman-basicfilesystems.templates:29001
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Mount point:\" ]"
msgstr "無"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:30001
msgid "Ext2 file system"
msgstr "Ext2 檔案系統"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:32001
msgid "FAT16 file system"
msgstr "FAT16 檔案系統"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:34001
msgid "FAT32 file system"
msgstr "FAT32 檔案系統"

#. Type: text
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:36001
msgid "NTFS journaling file system"
msgstr "NTFS 日誌式檔案系統"

#. Type: text
#. Description
#. :sl2:
#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:38001
#: ../partman-basicfilesystems.templates:40001
msgid "swap area"
msgstr "置換空間"

#. Type: text
#. Description
#. Type: multiselect
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:42001
#: ../partman-basicfilesystems.templates:43001
msgid "Mount options:"
msgstr "掛載選項:"

#. Type: multiselect
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:43001
msgid "Mount options can tune the behavior of the file system."
msgstr "掛載選項可以用來調整檔案系統的運作方式。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:44001
msgid "noatime - do not update inode access times at each access"
msgstr "noatime - 在存取時不更新 inode 的存取時間。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:45001
msgid "nodiratime - do not update directory inode access times"
msgstr "nodiratime - 在存取目錄時不更新 inode 的存取時間。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:46001
msgid "relatime - update inode access times relative to modify time"
msgstr "relatime - 以相對於修改時間來更新 inode 的存取時間"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:47001
msgid "nodev - do not support character or block special devices"
msgstr "nodev - 不支援字元或區塊等特殊裝置。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:48001
msgid "nosuid - ignore set-user-identifier or set-group-identifier bits"
msgstr ""
"nosuid - 忽略 set-user-identifier (suid) 或 set-group-identifier (sgid) 位元"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:49001
msgid "noexec - do not allow execution of any binaries"
msgstr "noexec - 禁止執行任何二進位檔案。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:50001
msgid "ro - mount the file system read-only"
msgstr "ro - 以唯讀方式掛載該檔案系統。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:51001
msgid "sync - all input/output activities occur synchronously"
msgstr "sync - 所有 輸入/輸出 動作都將同步執行。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:52001
msgid "usrquota - user disk quota accounting enabled"
msgstr "usrquota - 啟用 使用者 的磁碟配額"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:53001
msgid "grpquota - group disk quota accounting enabled"
msgstr "grpquota - 啟用 群組 的磁碟配額"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:54001
msgid "user_xattr - support user extended attributes"
msgstr "user_xattr - 支援使用者擴充屬性"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:55001
msgid "quiet - changing owner and permissions does not return errors"
msgstr "quiet - 在改變擁有者和權限時不回應任何錯誤訊息。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:56001
msgid "notail - disable packing of files into the file system tree"
msgstr "notail - 不要將檔案合併儲存至檔案系統樹狀結構。"

#. Type: text
#. Description
#. :sl2:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:57001
msgid "discard - trim freed blocks from underlying block device"
msgstr "discard - 從區塊裝置上清除不使用的區塊 (TRIM)"

#. #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:60001
#: ../partman-basicfilesystems.templates:61001 ../partman-ext3.templates:7001
#: ../partman-ext3.templates:8001
msgid "Go back to the menu and correct this problem?"
msgstr "是否返回選單並更正此錯誤？"

#. #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl5:
#. Type: boolean
#. Description
#. :sl5:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: boolean
#. Description
#. :sl2:
#. Type: boolean
#. Description
#. :sl2:
#: ../partman-basicfilesystems.templates:60001
#: ../partman-basicfilesystems.templates:61001 ../partman-ext3.templates:7001
#: ../partman-ext3.templates:8001
msgid ""
"If you do not go back to the partitioning menu and correct this error, the "
"partition will be used as is. This means that you may not be able to boot "
"from your hard disk."
msgstr ""
"如果您不返回磁碟分割選單並修正此錯誤，將不能使用此磁碟分割區。這意味著您可能"
"無法從您的硬碟進行開機。"

#. Type: text
#. Description
#. :sl2:
#. File system name
#: ../partman-ext3.templates:2001
msgid "Ext3 journaling file system"
msgstr "Ext3 日誌式檔案系統"

#. Type: text
#. Description
#. :sl2:
#. File system name
#: ../partman-ext3.templates:5001
msgid "Ext4 journaling file system"
msgstr "Ext4 日誌式檔案系統"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:7001
msgid ""
"Your boot partition has not been configured with the ext2 or ext3 file "
"system. This is needed by your machine in order to boot. Please go back and "
"use either the ext2 or ext3 file system."
msgstr ""
"您的啟動分割區並未設定為使用 ext2 或 ext3 檔案系統。但您必須如此設定，您的機"
"器才能夠開機。請返回並使用 ext2 或 ext3 檔案系統。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:8001
msgid ""
"Your boot partition is not located on the first primary partition of your "
"hard disk. This is needed by your machine in order to boot.  Please go back "
"and use your first primary partition as a boot partition."
msgstr ""
"您的啟動分割區並未位於硬碟的第一個主要分割區。但您必須如此設定，您的機器才能"
"夠開機。請返回並將您的第一個主要分割區設定為啟動分割區。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:9001
msgid "Return to the menu to set the bootable flag?"
msgstr "是否返回選單以進行 \"可開機\" 設定？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:9001
msgid ""
"The boot partition has not been marked as a bootable partition, even though "
"this is required by your machine in order to boot. You should go back and "
"set the bootable flag for the boot partition."
msgstr ""
"啟動分割區並未被標示為可開機的分割區，但您的機器必須要如此設定才能順利開機。"
"您應當返回，並把啟動分割區標示為可開機。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:9001
msgid ""
"If you don't correct this, the partition will be used as is and it is likely "
"that the machine cannot boot from its hard disk."
msgstr ""
"如果您不加以修正，該分割區將會以現行的設定運作，且很可能會使得這台機器無法由"
"自己的硬碟開機。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:10001
msgid ""
"The partition ${PARTITION} assigned to ${MOUNTPOINT} starts at an offset of "
"${OFFSET} bytes from the minimum alignment for this disk, which may lead to "
"very poor performance."
msgstr ""
"指定在 ${MOUNTPOINT} 的分割區 ${PARTITION} 從最小對齊點偏移了 ${OFFSET} 位"
"元，可能會導致極差的效能。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-ext3.templates:10001
msgid ""
"Since you are formatting this partition, you should correct this problem now "
"by realigning the partition, as it will be difficult to change later. To do "
"this, go back to the main partitioning menu, delete the partition, and "
"recreate it in the same position with the same settings. This will cause the "
"partition to start at a point best suited for this disk."
msgstr ""
"既然您要格式化此分割區，您應該重新對齊分割區以立即修正這個問題，因為此後將難"
"以修改。若要修正，請回到主要分割區選單，刪除該分割區，並以相同設定與相同位置"
"重新建立此分割區，如此一來該分割區將會位於您硬碟的最佳位置。"

#. Type: text
#. Description
#. :sl2:
#. File system name
#: ../partman-btrfs.templates:2001
msgid "btrfs journaling file system"
msgstr "btrfs 日誌式檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../partman-btrfs.templates:4001
msgid "btrfs root file system not supported without separate /boot"
msgstr "btrfs 檔案系統無法支援，除非有分離的 /boot"

#. Type: error
#. Description
#. :sl2:
#: ../partman-btrfs.templates:4001
msgid ""
"Your root file system is a btrfs file system. This is not supported by the "
"boot loader used by default by this installer."
msgstr ""
"您的 root 檔案系統所使用的是 btrfs 檔案系統。本安裝程式所預設的開機程式並不支"
"援。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-btrfs.templates:4001
msgid ""
"You should use a small /boot partition with another file system, such as "
"ext4."
msgstr ""
"您應該使用一個小的、並使用其它像是 ext4 格式的檔案系統來做為 /boot 分割區。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-btrfs.templates:5001
msgid "btrfs file system not supported for /boot"
msgstr "btrfs 檔案系統無法用在 /boot 上"

#. Type: error
#. Description
#. :sl2:
#: ../partman-btrfs.templates:5001
msgid ""
"You have mounted a btrfs file system as /boot. This is not supported by the "
"boot loader used by default by this installer."
msgstr ""
"您掛載在 /boot 上的是 btrfs 檔案系統。本安裝程式所預設的開機程式並不支援。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-btrfs.templates:5001
msgid ""
"You should use another file system, such as ext4, for the /boot partition."
msgstr "您應該在 /boot 分割區上使用其它像是 ext4 格式的檔案系統。"

#. Type: text
#. Description
#. File system name
#. :sl2:
#: ../partman-jfs.templates:2001
msgid "JFS journaling file system"
msgstr "JFS 日誌式檔案系統"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-jfs.templates:4001
msgid "Use unrecommended JFS root file system?"
msgstr "是否要在 root 檔案系統上使用 JFS？ (不建議)"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-jfs.templates:4001
msgid ""
"Your root file system is a JFS file system. This can cause problems with the "
"boot loader used by default by this installer."
msgstr ""
"您的 root 檔案系統所使用的是 JFS 檔案系統。它和本安裝程式所預設的開機程式搭配"
"使用時很可能會發生問題。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-jfs.templates:4001
msgid ""
"You should use a small /boot partition with another file system, such as "
"ext3."
msgstr ""
"您應該使用一個小的、並使用其它像是 ext3 格式的檔案系統來做為 /boot 分割區。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-jfs.templates:5001
msgid "Use unrecommended JFS /boot file system?"
msgstr "是否要在 /boot 檔案系統上使用 JFS？ (不建議)"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-jfs.templates:5001
msgid ""
"You have mounted a JFS file system as /boot. This is likely to cause "
"problems with the boot loader used by default by this installer."
msgstr ""
"您掛載在 /boot 上的是 JFS 檔案系統。它和本安裝程式所預設的開機程式搭配使用時"
"很可能會發生問題。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-jfs.templates:5001
msgid ""
"You should use another file system, such as ext3, for the /boot partition."
msgstr "您應該在 /boot 分割區上使用其它像是 ext3 格式的檔案系統。"

#. Type: text
#. Description
#. :sl2:
#. File system name
#: ../partman-xfs.templates:2001
msgid "XFS journaling file system"
msgstr "XFS 日誌式檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid "Identical labels for two file systems"
msgstr "兩個檔案系統使用了相同的標籤"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid ""
"Two file systems are assigned the same label (${LABEL}): ${PART1} and "
"${PART2}. Since file system labels are usually used as unique identifiers, "
"this is likely to cause reliability problems later."
msgstr ""
"有兩個檔案系統使用了相同的標籤 (${LABEL}): ${PART1} 以及 ${PART2}。因為檔案系"
"統的標籤常被用來做為獨一無二的識別代號，這樣可能會在之後引發穩定性方面的問"
"題。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:4001
msgid "Please correct this by changing labels."
msgstr "請改變標籤以修正這個錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid "Identical mount points for two file systems"
msgstr "兩個檔案系統指向同一個掛載點"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid ""
"Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} "
"and ${PART2}."
msgstr ""
"有兩個檔案系統指定到同一個掛載點 (${MOUNTPOINT}) 上了: ${PART1} 及 ${PART2}。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:5001
msgid "Please correct this by changing mount points."
msgstr "請改變掛載點以修正這個錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001
msgid "No root file system"
msgstr "沒有 root 檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001
msgid "No root file system is defined."
msgstr "沒有定義 root 檔案系統。"

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:6001 ../partman-target.templates:7001
msgid "Please correct this from the partitioning menu."
msgstr "請回到磁碟分割選單來修正這個錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:7001
msgid "Separate file system not allowed here"
msgstr "無法在此使用個別的檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../partman-target.templates:7001
msgid ""
"You assigned a separate file system to ${MOUNTPOINT}, but in order for the "
"system to start correctly this directory must be on the root file system."
msgstr ""
"您指派了 ${MOUNTPOINT} 使用個別的檔案系統，但這個目錄必須位於 root 檔案系統之"
"內才能確保系統能夠正常地啟動。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid "Do you want to resume partitioning?"
msgstr "您是否想要重新分割磁碟？"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid ""
"The attempt to mount a file system with type ${TYPE} in ${DEVICE} at "
"${MOUNTPOINT} failed."
msgstr ""
"試圖將檔案系檔的格式為 ${TYPE} 的 ${DEVICE} 掛載至 ${MOUNTPOINT} 時失敗了。"

#. Type: boolean
#. Description
#. :sl2:
#: ../partman-target.templates:8001
msgid "You may resume partitioning from the partitioning menu."
msgstr "您可以返回磁碟分割選單來重新分割磁碟。"

#. Type: text
#. Description
#. :sl2:
#: ../partman-target.templates:10001
msgid "Use as:"
msgstr "用途:"

#. Type: boolean
#. Description
#. :sl2:
#: ../clock-setup.templates:5001
msgid "Set the clock using NTP?"
msgstr "是否使用 NTP 來設定時鐘？"

#. Type: boolean
#. Description
#. :sl2:
#: ../clock-setup.templates:5001
msgid ""
"The Network Time Protocol (NTP) can be used to set the system's clock. The "
"installation process works best with a correctly set clock."
msgstr ""
"可以使用網路時間協定 (NTP) 來設定系統時鐘。若能搭配正確的時鐘設定，安裝程序將"
"會運作得更好。"

#. Type: string
#. Description
#. :sl2:
#: ../clock-setup.templates:6001
msgid "NTP server to use:"
msgstr "要使用的 NTP 伺服器:"

#. Type: string
#. Description
#. :sl2:
#: ../clock-setup.templates:6001
msgid ""
"The default NTP server is almost always a good choice, but if you prefer to "
"use another NTP server, you can enter it here."
msgstr ""
"預設的 NTP 伺服器將會是不錯的選擇，但如果您想使用的是其它的 NTP 伺服器，您可"
"以在此輸入。"

#. Type: boolean
#. Description
#. :sl2:
#: ../clock-setup.templates:9001
msgid "Wait another 30 seconds for hwclock to set the clock?"
msgstr "是否要再等待 30 秒，讓 hwclock 進行時鐘設定？"

#. Type: boolean
#. Description
#. :sl2:
#: ../clock-setup.templates:9001
msgid ""
"Setting the hardware clock is taking longer than expected. The 'hwclock' "
"program used to set the clock may have problems talking to the hardware "
"clock."
msgstr ""
"設定硬體時鐘會比預期花上更久的時間。用來設定時鐘的程式 'hwclock' 在和硬體時鐘"
"溝通時可能會發生障礙。"

#. Type: boolean
#. Description
#. :sl2:
#: ../clock-setup.templates:9001
msgid ""
"If you choose to not wait for hwclock to finish setting the clock, this "
"system's clock may not be set correctly."
msgstr ""
"如果您選擇不等待 hwclock 完成時鐘設定，那麼系統的時鐘可能沒有被正確地設定。"

#. Type: boolean
#. Description
#. :sl2:
#: ../base-installer.templates:1001
msgid "Proceed with installation to unclean target?"
msgstr "是否要在未完全清空的檔案系統上進行安裝作業？"

#. Type: boolean
#. Description
#. :sl2:
#: ../base-installer.templates:1001
msgid ""
"The target file system contains files from a past installation. These files "
"could cause problems with the installation process, and if you proceed, some "
"of the existing files may be overwritten."
msgstr ""
"該檔案系統還存在著上次安裝所殘留的檔案。這些檔案可能會妨礙安裝程序的進行，如"
"果您執意繼續的話，有些已存在的檔案很可能會被覆蓋掉。"

#. Type: error
#. Description
#. :sl2:
#: ../base-installer.templates:2001
msgid "No file system mounted on /target"
msgstr "在 /target 上沒有掛載任何的檔案系統"

#. Type: error
#. Description
#. :sl2:
#: ../base-installer.templates:2001
msgid ""
"Before the installation can proceed, a root file system must be mounted on /"
"target. The partitioner and formatter should have done this for you."
msgstr ""
"必須先在 /target 上掛載一個 root 檔案系統，安裝作業才能夠繼續進行。磁碟分割程"
"式和格式化程式應該已經替您完成這些工作了。"

#. Type: error
#. Description
#. :sl2:
#: ../base-installer.templates:3001
msgid "Not installing to unclean target"
msgstr "不能安裝至未完全清空之檔案系統上"

#. Type: error
#. Description
#. :sl2:
#: ../base-installer.templates:3001
msgid ""
"The installation to the target file system has been canceled. You should go "
"back and erase or format the target file system before proceeding with the "
"install."
msgstr ""
"在該檔案系統上所進行的安裝作業已經取消了。您應該返回並刪除或格式化該檔案系"
"統，然後才能再繼續進行安裝作業。"

#. Type: error
#. Description
#. The base system is the minimal Debian system
#. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7
#. :sl2:
#: ../bootstrap-base.templates:2001
msgid "Cannot install base system"
msgstr "無法安裝 Base System"

#. Type: error
#. Description
#. The base system is the minimal Debian system
#. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7
#. :sl2:
#: ../bootstrap-base.templates:2001
msgid ""
"The installer cannot figure out how to install the base system. No "
"installable CD-ROM was found and no valid mirror was configured."
msgstr ""
"安裝程式無法判斷該如何才能安裝 Base System。既找不到可用來安裝的光碟，且也沒"
"有設定可用的鏡像站。"

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a Release file name.
#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a Release.gpg file name
#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a gpg key ID
#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a filename
#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a filename or package name
#. Debootstrap is a program name: should not be translated
#: ../bootstrap-base.templates:3001 ../bootstrap-base.templates:7001
#: ../bootstrap-base.templates:17001 ../bootstrap-base.templates:18001
#: ../bootstrap-base.templates:19001 ../bootstrap-base.templates:20001
#: ../bootstrap-base.templates:21001 ../bootstrap-base.templates:22001
msgid "Debootstrap Error"
msgstr "Debootstrap 錯誤"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:3001
msgid "Failed to determine the codename for the release."
msgstr "無法判別這個發行版的代碼 (codename)。"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:4001
msgid "Failed to install the base system"
msgstr "無法安裝 Base System"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:4001
msgid "The base system installation into /target/ failed."
msgstr "將 Base System 安裝至 /target/ 時失敗了。"

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:5001 ../bootstrap-base.templates:6001
msgid "Base system installation error"
msgstr "Base System 的安裝作業發生錯誤"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:5001
msgid ""
"The debootstrap program exited with an error (return value ${EXITCODE})."
msgstr "debootstrap 程式因發生錯誤而結束了 (回傳值 ${EXITCODE})。"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:6001
msgid "The debootstrap program exited abnormally."
msgstr "debootstrap 程式異常結束。"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:7001
msgid "The following error occurred:"
msgstr "發生了下列錯誤:"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:11001
msgid "Unable to install the selected kernel"
msgstr "無法安裝所指定的 Kernel"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:11001
msgid ""
"An error was returned while trying to install the kernel into the target "
"system."
msgstr "在試圖將 Kernel 安裝至系統中時發生錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:11001
msgid "Kernel package: '${KERNEL}'."
msgstr "Kernel 套件: '${KERNEL}'。"

#. Type: select
#. Choices
#. :sl2:
#: ../bootstrap-base.templates:12001
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" means \"no kernel\" ]"
msgstr "無"

#. Type: select
#. Description
#. :sl2:
#: ../bootstrap-base.templates:12002
msgid "Kernel to install:"
msgstr "要安裝的 Kernel:"

#. Type: select
#. Description
#. :sl2:
#: ../bootstrap-base.templates:12002
msgid ""
"The list shows the available kernels. Please choose one of them in order to "
"make the system bootable from the hard drive."
msgstr "在列表中的是可以使用的 Kernel。請選擇其中之一來讓系統可以從硬碟開機。"

#. Type: boolean
#. Description
#. :sl2:
#: ../bootstrap-base.templates:14001
msgid "Continue without installing a kernel?"
msgstr "是否在沒有安裝 Kernel 的狀況下繼續進行？"

#. Type: boolean
#. Description
#. :sl2:
#: ../bootstrap-base.templates:14001
msgid "No installable kernel was found in the defined APT sources."
msgstr "在指定的 APT 來源中未能找到可以用來安裝的 Kernel。"

#. Type: boolean
#. Description
#. :sl2:
#: ../bootstrap-base.templates:14001
msgid ""
"You may try to continue without a kernel, and manually install your own "
"kernel later. This is only recommended for experts, otherwise you will "
"likely end up with a machine that doesn't boot."
msgstr ""
"您可以試著在沒有 Kernel 的狀況下繼續進行，並在稍後再自行安裝您自己的 Kernel。"
"但這只建議給進階使用者採用，否則很可能到最後您的機器會無法開機。"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:15001
msgid "Cannot install kernel"
msgstr "無法安裝 Kernel"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:15001
msgid "The installer cannot find a suitable kernel package to install."
msgstr "安裝程式無法找到合適的 Kernel 以進行安裝。"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:16001
msgid "Unable to install ${PACKAGE}"
msgstr "無法安裝 ${PACKAGE}"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:16001
msgid ""
"An error was returned while trying to install the ${PACKAGE} package onto "
"the target system."
msgstr "在試著將 ${PACKAGE} 套件安裝至系統中時發生錯誤。"

#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a Release file name.
#: ../bootstrap-base.templates:17001
msgid "Failed getting Release file ${SUBST0}."
msgstr "無法取得 Release 檔 ${SUBST0}。"

#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a Release.gpg file name
#: ../bootstrap-base.templates:18001
msgid "Failed getting Release signature file ${SUBST0}."
msgstr "無法取得 Release 的簽名檔 ${SUBST0}。"

#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a gpg key ID
#: ../bootstrap-base.templates:19001
msgid "Release file signed by unknown key (key id ${SUBST0})"
msgstr "Release 檔的簽名所使用的密鑰不明 (鍵值 ${SUBST0})"

#. Type: error
#. Description
#. :sl2:
#: ../bootstrap-base.templates:20001
msgid "Invalid Release file: no valid components."
msgstr "不正確的 Release 檔: 沒有可用的元件。"

#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a filename
#: ../bootstrap-base.templates:21001
msgid "Invalid Release file: no entry for ${SUBST0}."
msgstr "不正確的 Release 檔: 沒有 ${SUBST0} 項目。"

#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a filename or package name
#. Debootstrap is a program name: should not be translated
#: ../bootstrap-base.templates:22001
msgid ""
"Couldn't retrieve ${SUBST0}. This may be due to a network problem or a bad "
"CD, depending on your installation method."
msgstr ""
"無法取得 ${SUBST0}。依據您安裝方式的不同，這可能是因為網路的問題或是光碟損壞"
"了。"

#. Type: error
#. Description
#. :sl2:
#. SUBST0 is a filename or package name
#. Debootstrap is a program name: should not be translated
#: ../bootstrap-base.templates:22001
msgid ""
"If you are installing from CD-R or CD-RW, burning the CD at a lower speed "
"may help."
msgstr ""
"如果您是藉由 CD-R 或是 CD-RW 來進行安裝的，以較低倍速來燒錄該光碟也許有助於解"
"決這個問題。"

#. Type: error
#. Description
#. Debootstrap is a program name: should not be translated
#. :sl2:
#: ../bootstrap-base.templates:57001
msgid "Debootstrap warning"
msgstr "Debootstrap 警告"

#. Type: error
#. Description
#. Debootstrap is a program name: should not be translated
#. :sl2:
#: ../bootstrap-base.templates:57001
msgid "Warning: ${INFO}"
msgstr "警告: ${INFO}"

#. Type: text
#. Description
#. SUBST0 is an url
#. :sl2:
#: ../bootstrap-base.templates:58001
msgid "Retrying failed download of ${SUBST0}"
msgstr "再次試著下載失敗的 ${SUBST0}"

#. Type: text
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:4001
msgid "Scanning local repositories..."
msgstr "正在掃瞄本機的檔案資料庫……"

#. Type: text
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:5001
msgid "Scanning the security updates repository..."
msgstr "正在掃瞄安全更新檔案庫……"

#. Type: text
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:6001
msgid "Scanning the release updates repository..."
msgstr "正在掃瞄發行版更新套件庫……"

#. Type: text
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:7001
msgid "Scanning the backports repository..."
msgstr "正在掃瞄 backports 套件庫……"

#. Type: select
#. Choices
#. :sl2:
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#: ../apt-setup-udeb.templates:8001 ../apt-mirror-setup.templates:4001
msgid "Ignore"
msgstr "忽略"

#. Type: error
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:10001
msgid "Cannot access repository"
msgstr "無法存取檔案庫"

#. Type: error
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:10001
msgid ""
"The repository on ${HOST} couldn't be accessed, so its updates will not be "
"made available to you at this time. You should investigate this later."
msgstr ""
"無法存取 ${HOST} 上的檔案庫，所以您目前無法取得它所提供的更新。您應該在稍後對"
"此進行檢查。"

#. Type: error
#. Description
#. :sl2:
#: ../apt-setup-udeb.templates:10001
msgid ""
"Commented out entries for ${HOST} have been added to the /etc/apt/sources."
"list file."
msgstr "${HOST} 的項目已被加上註解並附加到 /etc/apt/sources.list 檔裡。"

#. Type: error
#. Description
#. :sl2:
#: ../apt-cdrom-setup.templates:2001
msgid "apt configuration problem"
msgstr "Apt 設定問題"

#. Type: error
#. Description
#. :sl2:
#: ../apt-cdrom-setup.templates:2001
msgid ""
"An attempt to configure apt to install additional packages from the CD "
"failed."
msgstr "試圖設定 apt 可由 CD 來安裝其它套件，但失敗了。"

#. Type: boolean
#. Description
#. :sl2:
#: ../apt-mirror-setup.templates:6001
msgid "Continue without a network mirror?"
msgstr "是否不使用網路鏡像站並繼續進行？"

#. Type: boolean
#. Description
#. :sl2:
#: ../apt-mirror-setup.templates:6001
msgid "No network mirror was selected."
msgstr "未選取任何的網路鏡像站。"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:1001
msgid "Use restricted software?"
msgstr "是否使用 restricted 軟體？"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:1001
msgid ""
"Some non-free software is available in packaged form. Though this software "
"is not a part of the main distribution, standard package management tools "
"can be used to install it. This software has varying licenses which may "
"prevent you from using, modifying, or sharing it."
msgstr ""
"有些 non-free 的軟體也能夠以套件的方式取得，雖然這些軟體並不包含於主要的發行"
"版本中，但還是可以使用標準的套件管理工具來安裝它們。這些軟體都有其不同的使用"
"許可權，可能會禁止您使用、修改或將它們分享出來。"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:2001
msgid "Use software from the \"universe\" component?"
msgstr "是否使用 universe 軟體？"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:2001
msgid ""
"Some additional software is available in packaged form. This software is "
"free and, though it is not a part of the main distribution, standard package "
"management tools can be used to install it."
msgstr ""
"一些其它的軟體也能夠以套件的方式取得，雖然這些軟體是自由軟體，但不包含於主要"
"的發行版本中，但還是可以使用標準的套件管理工具來安裝它們。"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:3001
msgid "Use software from the \"multiverse\" component?"
msgstr "是否使用 multiverse 軟體？"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:3001
msgid ""
"Some non-free software is available in packaged form. Though this software "
"is not a part of the main distribution, standard package management tools "
"can be used to install it. This software has varying licenses and (in some "
"cases) patent restrictions which may prevent you from using, modifying, or "
"sharing it."
msgstr ""
"有些 non-free 的軟體也能夠以套件的方式取得，雖然這些軟體並不包含於主要的發行"
"版本中，但還是可以使用標準的套件管理工具來安裝它們。這些軟體都有其不同的使用"
"許可權及 (部份受到) 專利限制，可能會禁止您使用、修改或將它們分享出來。"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:4001
msgid "Use software from the \"partner\" repository?"
msgstr "是否使用來自 \"partner\" 的檔案庫所提供的軟體？"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:4001
msgid ""
"Some additional software is available from Canonical's \"partner\" "
"repository. This software is not part of Ubuntu, but is offered by Canonical "
"and the respective vendors as a service to Ubuntu users."
msgstr ""
"有些額外軟體可由 Canonical 的 \"partner\" 檔案庫取得。這些軟體並不是 Ubuntu "
"的一部份，但是是由 Canonical 及各個供應商向 Ubuntu 使用者提供的一項服務。"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:5001
msgid "Use backported software?"
msgstr "是否使用 backported 軟體？"

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#. :sl2:
#: ../apt-mirror-setup.templates-ubuntu:5001
msgid ""
"Some software has been backported from the development tree to work with "
"this release. Although this software has not gone through such complete "
"testing as that contained in the release, it includes newer versions of some "
"applications which may provide useful features."
msgstr ""
"有些軟體由開發中的版本向後移植到這個發行版中。雖然這個軟體並沒有像發行版裡的"
"軟體那樣經過了完整的測試，但它卻提供了一些版本較新且可能包含了功能較多的應用"
"程式。"

#. Type: boolean
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:8001
msgid "Create a normal user account now?"
msgstr "是否要立即建立一個一般的使用者帳號？"

#. Type: boolean
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:8001
msgid ""
"It's a bad idea to use the root account for normal day-to-day activities, "
"such as the reading of electronic mail, because even a small mistake can "
"result in disaster. You should create a normal user account to use for those "
"day-to-day tasks."
msgstr ""
"使用 root 帳號來進行諸如閱讀電子郵件這類普通的日常操作並不是恰當的做法，因為"
"在此情況下，即使一個極小的錯誤也可能會導致嚴重的後果。您應該建立一個一般的使"
"用者帳號並使用它來進行這些日常的工作。"

#. Type: boolean
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:8001
msgid ""
"Note that you may create it later (as well as any additional account) by "
"typing 'adduser <username>' as root, where <username> is an username, like "
"'imurdock' or 'rms'."
msgstr ""
"請注意，您也可以在稍後以 root 的身份執行 'adduser <username>' 指令來建立這個"
"帳號 (任何的其它帳號做法也是雷同)，其中的 <username> 則為使用者名稱，例如 "
"imurdock 或 rms。"

#. Type: error
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:11001
msgid "Invalid username"
msgstr "不正確的使用者名稱"

#. Type: error
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:11001
msgid ""
"The username you entered is invalid. Note that usernames must start with a "
"lower-case letter, which can be followed by any combination of numbers and "
"more lower-case letters, and must be no more than 32 characters long."
msgstr ""
"您所輸入的使用者名稱並不正確。請注意，使用者名稱必須以小寫字母開頭，接著的則"
"可以是任意數字或其它的小寫字母之組合，並不能超過 32 個字元。"

#. Type: error
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:12001
msgid "Reserved username"
msgstr "預留的使用者名稱"

#. Type: error
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:12001
msgid ""
"The username you entered (${USERNAME}) is reserved for use by the system. "
"Please select a different one."
msgstr ""
"您所輸入的使用者名稱 (${USERNAME}) 是預留給系統使用的。請選擇另一個不同的名"
"稱。"

#. Type: error
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:15001 ../grub-installer.templates:11001
msgid "Password input error"
msgstr "密碼輸入錯誤"

#. Type: error
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:15001 ../grub-installer.templates:11001
msgid "The two passwords you entered were not the same. Please try again."
msgstr "您所輸入的兩個密碼並不相同。請再次輸入密碼。"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../user-setup-udeb.templates:16001 ../network-console.templates:6001
#: ../partman-iscsi.templates:8001
msgid "Empty password"
msgstr "空的密碼"

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl2:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#. #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-#
#. Type: error
#. Description
#. :sl3:
#: ../user-setup-udeb.templates:16001 ../network-console.templates:6001
#: ../partman-iscsi.templates:8001
msgid ""
"You entered an empty password, which is not allowed. Please choose a non-"
"empty password."
msgstr "您所輸入的是空的密碼，而這是不允許的。請選擇一個不是空的密碼。"

#. Type: boolean
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:17001
msgid "Enable shadow passwords?"
msgstr "是否啟用 shadow 密碼？"

#. Type: boolean
#. Description
#. :sl2:
#: ../user-setup-udeb.templates:17001
msgid ""
"Shadow passwords make your system more secure because nobody is able to view "
"even encrypted passwords. The passwords are stored in a separate file that "
"can only be read by special programs. The use of shadow passwords is "
"strongly recommended, except in a few cases such as NIS environments."
msgstr ""
"啟用 shadow 密碼後，沒有任何人能夠看到已加了密的密碼，因而會使得系統更加安"
"全。密碼會被存放到只有特定的程式才能讀取的另一個檔案中。除了一些罕見的情況，"
"像是使用 NIS 環境，否則強烈建議您使用 shadow 密碼。"

#. Type: select
#. Choices
#. :sl2:
#: ../cdebconf-udeb.templates:2001
msgid "critical"
msgstr "關鍵"

#. Type: select
#. Choices
#. :sl2:
#: ../cdebconf-udeb.templates:2001
msgid "high"
msgstr "高"

#. Type: select
#. Choices
#. :sl2:
#: ../cdebconf-udeb.templates:2001
msgid "medium"
msgstr "中"

#. Type: select
#. Choices
#. :sl2:
#: ../cdebconf-udeb.templates:2001
msgid "low"
msgstr "低"

#. Type: select
#. Description
#. :sl2:
#: ../cdebconf-udeb.templates:2002
msgid "Ignore questions with a priority less than:"
msgstr "忽略問題，如果它的優先等級低於:"

#. Type: select
#. Description
#. :sl2:
#: ../cdebconf-udeb.templates:2002
msgid ""
"Packages that use debconf for configuration prioritize the questions they "
"might ask you. Only questions with a certain priority or higher are actually "
"shown to you; all less important questions are skipped."
msgstr ""
"如果套件是使用 debconf 來進行設定時，指定在設定過程中將被提問的問題的優先等"
"級。只有等於或高於這個優先等級的問題才會顯示並要求您回答﹔其它不太重要的問題"
"將會被略過。"

#. Type: select
#. Description
#. :sl2:
#: ../cdebconf-udeb.templates:2002
msgid ""
"You can select the lowest priority of question you want to see:\n"
" - 'critical' is for items that will probably break the system\n"
"    without user intervention.\n"
" - 'high' is for items that don't have reasonable defaults.\n"
" - 'medium' is for normal items that have reasonable defaults.\n"
" - 'low' is for trivial items that have defaults that will work in\n"
"   the vast majority of cases."
msgstr ""
"您可以選擇您想回答的問題的最低等級:\n"
" - '關鍵' 是指如果使用者沒有加以設定，將可能會使得系統無法正常\n"
"          運作的項目。\n"
" - '高'   是指預設值往往並不是很恰當的項目。\n"
" - '中'   是指預設值適用於多數情況的一般項目。\n"
" - '低'   是指在絕大多數情況下都可以放心使用其預設值的瑣碎項目。"

#. Type: select
#. Description
#. :sl2:
#: ../cdebconf-udeb.templates:2002
msgid ""
"For example, this question is of medium priority, and if your priority were "
"already 'high' or 'critical', you wouldn't see this question."
msgstr ""
"例如，這個問題的優先等級是 '中' ，而您所指定的優先等級卻是 '高' 或是 '關"
"鍵' ，那麼這個問題就會被直接略過了。"

#. Type: text
#. Description
#. :sl2:
#: ../cdebconf-priority.templates:1001
msgid "Change debconf priority"
msgstr "改變 debconf 的優先等級設定"

#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl3:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:4001 ../grub-installer.templates:6001
#: ../grub-installer.templates:15001
msgid "Unable to configure GRUB"
msgstr "無法設定 GRUB"

#. Type: string
#. Description
#. :sl2:
#. Type: select
#. Description
#. :sl2:
#: ../grub-installer.templates:7001 ../grub-installer.templates:8002
msgid "Device for boot loader installation:"
msgstr "用來安裝開機程式的裝置:"

#. Type: string
#. Description
#. :sl2:
#. Type: select
#. Description
#. :sl2:
#: ../grub-installer.templates:7001 ../grub-installer.templates:8002
msgid ""
"You need to make the newly installed system bootable, by installing the GRUB "
"boot loader on a bootable device. The usual way to do this is to install "
"GRUB on the master boot record of your first hard drive. If you prefer, you "
"can install GRUB elsewhere on the drive, or to another drive, or even to a "
"floppy."
msgstr ""
"必須把 GRUB 開機程式安裝至可開機裝置上，才能讓這個新安裝的系統能夠開機。一般"
"作法是將 GRUB 安裝至您第一顆硬碟的主要開機記錄 (MBR) 上。而或者，也可以依您喜"
"好將 GRUB 安裝至磁碟的其它地方，或安裝至另一顆磁碟上，或甚至也可以將它安裝至"
"磁碟片上。"

#. Type: string
#. Description
#. :sl2:
#: ../grub-installer.templates:7001
msgid ""
"The device should be specified as a device in /dev. Below are some "
"examples:\n"
" - \"/dev/sda\" will install GRUB to the master boot record of your first\n"
"   hard drive;\n"
" - \"/dev/sda2\" will use the second partition of your first hard drive;\n"
" - \"/dev/sdc5\" will use the first extended partition of your third hard\n"
"   drive;\n"
" - \"/dev/fd0\" will install GRUB to a floppy."
msgstr ""
"請以 /dev 裡的裝置來指定磁碟。範例如下:\n"
" - /dev/sda 將會把 GRUB 安裝至第一顆硬碟的主要開機記錄 (MBR) 上。\n"
" - /dev/sda2 將安裝至第一顆硬碟的第二個分割區。\n"
" - /dev/sdc5 將安裝至第三顆硬碟的第一個延伸分割區。\n"
" - /dev/fd0 則會將 GRUB 安裝至磁碟片上。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid "GRUB password:"
msgstr "GRUB 密碼:"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid ""
"The GRUB boot loader offers many powerful interactive features, which could "
"be used to compromise your system if unauthorized users have access to the "
"machine when it is starting up. To defend against this, you may choose a "
"password which will be required before editing menu entries or entering the "
"GRUB command-line interface. By default, any user will still be able to "
"start any menu entry without entering the password."
msgstr ""
"GRUB 開機程式提供了很多強大的互動式功能，若在它啟動時有未經授權的使用者直接操"
"作您的機器，它可能會被利用來破壞您的系統。為了防止類似的情事發生，您可以設定"
"一個密碼，而在編輯選單上的項目或進入 GRUB 的命令列介面時則必須輸入這個密碼。"
"在預設上，所有的使用者仍然不需要輸入這個密碼就可以啟動選單上的任何項目。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:9001
msgid "If you do not wish to set a GRUB password, leave this field blank."
msgstr "如果您不想設定 GRUB 的密碼，請直接留白。"

#. Type: password
#. Description
#. :sl2:
#: ../grub-installer.templates:10001
msgid ""
"Please enter the same GRUB password again to verify that you have typed it "
"correctly."
msgstr "請再次輸入相同的 GRUB 密碼以確認您是否正確鍵入。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid "GRUB installation failed"
msgstr "GRUB 的安裝失敗了"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:13001
msgid ""
"The '${GRUB}' package failed to install into /target/. Without the GRUB boot "
"loader, the installed system will not boot."
msgstr ""
"無法將 '${GRUB}' 套件安裝至 /target/。若沒有 GRUB 開機程式，這個安裝好的系統"
"將無法開機。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:14001
msgid "Unable to install GRUB in ${BOOTDEV}"
msgstr "無法將 GRUB 安裝至 ${BOOTDEV}"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:14001
msgid "Executing 'grub-install ${BOOTDEV}' failed."
msgstr "在執行 'grub-install ${BOOTDEV}' 時失敗了。"

#. Type: error
#. Description
#. :sl2:
#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:14001 ../grub-installer.templates:15001
msgid "This is a fatal error."
msgstr "這是一個嚴重錯誤。"

#. Type: error
#. Description
#. :sl2:
#: ../grub-installer.templates:15001
msgid "Executing 'update-grub' failed."
msgstr "在執行 'update-grub' 時失敗了。"

#. Type: text
#. Description
#. Rescue menu item
#. :sl2:
#: ../grub-installer.templates:29001
msgid "Reinstall GRUB boot loader"
msgstr "重新安裝 GRUB 開機程式"

#. Type: text
#. Description
#. Rescue menu item
#. :sl2:
#: ../grub-installer.templates:33001
msgid "Force GRUB installation to the EFI removable media path"
msgstr "強制將 GRUB 安裝在 EFI 可移除式媒體路徑"

#. Type: error
#. Description
#. :sl2:
#: ../preseed-common.templates:2001
msgid "Failed to retrieve the preconfiguration file"
msgstr "無法取得事先準備好的設定檔"

#. Type: error
#. Description
#. :sl2:
#: ../preseed-common.templates:2001
msgid ""
"The file needed for preconfiguration could not be retrieved from "
"${LOCATION}. The installation will proceed in non-automated mode."
msgstr ""
"無法由 ${LOCATION} 取得在預先設定時所需要的檔案。安裝程式將以非自動模式進行。"

#. Type: error
#. Description
#. :sl2:
#: ../preseed-common.templates:3001
msgid "Failed to process the preconfiguration file"
msgstr "無法執行事先準備好的設定檔"

#. Type: error
#. Description
#. :sl2:
#: ../preseed-common.templates:3001
msgid ""
"The installer failed to process the preconfiguration file from ${LOCATION}. "
"The file may be corrupt."
msgstr "安裝程式無法執行預先設定檔案 ${LOCATION}。這個檔案可能已經損毀了。"

#. Type: error
#. Description
#. :sl2:
#: ../preseed-common.templates:12001
msgid "Failed to run preseeded command"
msgstr "無法執行預先設定指令。"

#. Type: error
#. Description
#. :sl2:
#: ../preseed-common.templates:12001
msgid ""
"Execution of preseeded command \"${COMMAND}\" failed with exit code ${CODE}."
msgstr "在執行預先設定指令 ${COMMAND} 時失敗了，錯誤代碼為 ${CODE}。"

#. Type: title
#. Description
#. Info message displayed when running in rescue mode
#. :sl2:
#: ../rescue-check.templates:2001
msgid "Rescue mode"
msgstr "救援模式"

#. Type: select
#. Description
#. :sl2:
#: ../rescue-mode.templates:3002
msgid "Device to use as root file system:"
msgstr "要將其做為 root 檔案系統的裝置:"

#. Type: select
#. Description
#. :sl2:
#: ../rescue-mode.templates:3002
msgid ""
"Enter a device you wish to use as your root file system. You will be able to "
"choose among various rescue operations to perform on this file system."
msgstr ""
"請輸入您想要將它做為 root 檔案系統的裝置。您將可以在這個檔案系統上選擇並進行"
"各式各樣的救援程序。"

#. Type: select
#. Description
#. :sl2:
#: ../rescue-mode.templates:3002
msgid ""
"If you choose not to use a root file system, you will be given a reduced "
"choice of operations that can be performed without one. This may be useful "
"if you need to correct a partitioning problem."
msgstr ""
"如果您選擇了不使用任何的 root 檔案系統，在此狀況下可供您選擇的操作將會減少。"
"這在您想要修正分割區問題時將會很有用處。"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:8001
msgid "Execute a shell in ${DEVICE}"
msgstr "在 ${DEVICE} 裡執行 shell"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:9001
msgid "Execute a shell in the installer environment"
msgstr "在安裝程式的環境裡執行 shell"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:10001
msgid "Choose a different root file system"
msgstr "使用另一個 root 檔案系統"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:11001
msgid "Reboot the system"
msgstr "重新啟動系統"

#. Type: text
#. Description
#. :sl2:
#. Type: text
#. Description
#. :sl2:
#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:12001 ../rescue-mode.templates:16001
#: ../rescue-mode.templates:17001
msgid "Executing a shell"
msgstr "呼叫 shell"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:12001
msgid ""
"After this message, you will be given a shell with ${DEVICE} mounted on \"/"
"\". If you need any other file systems (such as a separate \"/usr\"), you "
"will have to mount those yourself."
msgstr ""
"在此訊息之後，您將會進入一個將 ${DEVICE} 掛載在 \"/\" 的 shell 裡。如果您還會"
"用到其它的檔案系統，像是另一個獨立的 \"/usr\"，您將必須自行掛載。"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:15001
msgid "Interactive shell on ${DEVICE}"
msgstr "在 ${DEVICE} 上的互動式 shell"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:16001
msgid ""
"After this message, you will be given a shell with ${DEVICE} mounted on \"/"
"target\". You may work on it using the tools available in the installer "
"environment. If you want to make it your root file system temporarily, run "
"\"chroot /target\". If you need any other file systems (such as a separate "
"\"/usr\"), you will have to mount those yourself."
msgstr ""
"在此訊息之後，您將會進入一個將 ${DEVICE} 掛載在 \"/target\" 的 shell 裡。您可"
"以使用安裝環境所提供的工具來操作它。如果您想暫時進入您的 root 檔案系統並進行"
"操作，請執行 \"chroot /target\"。如果您還會用到其它的檔案系統，像是另一個獨立"
"的 \"/usr\"，您將必須自行掛載。"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:17001
msgid ""
"After this message, you will be given a shell in the installer environment. "
"No file systems have been mounted."
msgstr ""
"在此訊息之後，您將會進入一個以安裝程式為環境的 shell 裡，且未掛載任何的檔案系"
"統。"

#. Type: text
#. Description
#. :sl2:
#: ../rescue-mode.templates:18001
msgid "Interactive shell in the installer environment"
msgstr "在安裝程式的環境裡的互動式 shell"

#. Type: password
#. Description
#. :sl2:
#: ../rescue-mode.templates:19001
msgid "Passphrase for ${DEVICE}:"
msgstr "${DEVICE} 的密語:"

#. Type: password
#. Description
#. :sl2:
#: ../rescue-mode.templates:19001
msgid "Please enter the passphrase for the encrypted volume ${DEVICE}."
msgstr "請替加密的 Volume ${DEVICE} 設定密語。"

#. Type: password
#. Description
#. :sl2:
#: ../rescue-mode.templates:19001
msgid ""
"If you don't enter anything, the volume will not be available during rescue "
"operations."
msgstr "如果您什麼都不輸入，在進行救援的過程中將無法使用這個 Volume。"

#. Type: multiselect
#. Description
#. :sl2:
#: ../rescue-mode.templates:20002
msgid "Partitions to assemble:"
msgstr "要加載的分割區:"

#. Type: multiselect
#. Description
#. :sl2:
#: ../rescue-mode.templates:20002
msgid ""
"Select the partitions to assemble into a RAID array. If you select "
"\"Automatic\", then all devices containing RAID physical volumes will be "
"scanned and assembled."
msgstr ""
"選擇要加載至 RAID 陣列的分割區。如果你選擇了 \"自動\"，則會掃瞄並加載所有包含"
"了 RAID Physical Volumes 的裝置。"

#. Type: multiselect
#. Description
#. :sl2:
#: ../rescue-mode.templates:20002
msgid ""
"Note that a RAID partition at the end of a disk may sometimes cause that "
"disk to be mistakenly detected as containing a RAID physical volume. In that "
"case, you should select the appropriate partitions individually."
msgstr ""
"請注意到，若某個 RAID 是該磁碟的最後一個分割區，有時候會導致該磁碟被誤判為包"
"含了 RAID Physical Volumes。在此狀況下，您應當手動來選取適切的分割區。"

#. Type: boolean
#. Description
#. :sl2:
#: ../rescue-mode.templates:21001
msgid "Mount separate ${FILESYSTEM} partition?"
msgstr "要掛載分離的 ${FILESYSTEM} 分割區嗎？"

#. Type: boolean
#. Description
#. :sl2:
#: ../rescue-mode.templates:21001
msgid "The installed system appears to use a separate ${FILESYSTEM} partition."
msgstr "安裝的系統似乎是使用分離的 ${FILESYSTEM} 分割區。"

#. Type: boolean
#. Description
#. :sl2:
#: ../rescue-mode.templates:21001
msgid ""
"It is normally a good idea to mount it as it will allow operations such as "
"reinstalling the boot loader. However, if the file system on ${FILESYSTEM} "
"is corrupt then you may want to avoid mounting it."
msgstr ""
"一般來說，會建議掛載該檔案系統，因為掛載該檔案系統將允許如重新安裝開機載入程"
"式之類的操作，但是如果在 ${FILESYSTEM} 的檔案系統是損毀的，您可能會想避免掛"
"載。"

#. Type: select
#. Choices
#. Possible locations for debug logs to be saved
#. :sl2:
#: ../save-logs.templates:2001
msgid "floppy"
msgstr "磁碟片"

#. Type: select
#. Choices
#. Possible locations for debug logs to be saved
#. :sl2:
#: ../save-logs.templates:2001
msgid "web"
msgstr "網頁"

#. Type: select
#. Choices
#. Possible locations for debug logs to be saved
#. :sl2:
#: ../save-logs.templates:2001
msgid "mounted file system"
msgstr "已掛載的檔案系統"

#. Type: select
#. Description
#. :sl2:
#: ../save-logs.templates:2002
msgid "How should the debug logs be saved or transferred?"
msgstr "該如何儲存或傳送這些 debug logs？"

#. Type: select
#. Description
#. :sl2:
#: ../save-logs.templates:2002
msgid ""
"Debugging log files for the installer can be saved to floppy, served up over "
"the web, or saved to a mounted file system."
msgstr ""
"安裝程式的 debugging log 檔案可以儲存至磁碟片、轉移至網頁上，或是儲存至某個已"
"掛載的檔案系統。"

#. Type: string
#. Description
#. :sl2:
#: ../save-logs.templates:3001
msgid "Directory in which to save debug logs:"
msgstr "要將 debug logs 儲存至哪個目錄裡:"

#. Type: string
#. Description
#. :sl2:
#: ../save-logs.templates:3001
msgid ""
"Please make sure the file system you want to save debug logs on is mounted "
"before you continue."
msgstr "在繼續進行之前，請確認您要用來儲存 debug logs 的那個檔案系統已被掛載。"

#. Type: error
#. Description
#. :sl2:
#: ../save-logs.templates:4001
msgid "Cannot save logs"
msgstr "無法儲存 logs"

#. Type: error
#. Description
#. :sl2:
#: ../save-logs.templates:4001
msgid "The directory \"${DIR}\" does not exist."
msgstr "${DIR} 這個目錄並不存在。"

#. Type: note
#. Description
#. :sl2:
#: ../save-logs.templates:7001
msgid "Insert formatted floppy in drive"
msgstr "請在磁碟機中插入已格式化的軟碟片"

#. Type: note
#. Description
#. :sl2:
#: ../save-logs.templates:7001
msgid "Log files and debug info will be copied into this floppy."
msgstr "Log 檔案 和 Debug 資訊 將被複製到這張軟碟片上。"

#. Type: note
#. Description
#. :sl2:
#: ../save-logs.templates:7001
msgid ""
"The information will also be stored in /var/log/installer/ on the installed "
"system."
msgstr "這些資訊也會同時儲存在安裝系統中的 /var/log/installer/ 裡。"

#. Type: text
#. Description
#. Main menu item
#. Translators: keep it under 65 columns
#. :sl2:
#: ../cdrom-checker.templates:12001
msgid "Check the CD-ROM(s) integrity"
msgstr "檢驗光碟的完整性"