# Simplified Chinese translation for Debian Installer.
#
# Copyright (C) 2003-2008 Software in the Public Interest, Inc.
# This file is distributed under the same license as debian-installer.
#
# Translated by Yijun Yuan (2004), Carlos Z.F. Liu (2004,2005,2006) and
# Ming Hua (2005,2006,2007,2008), Deng Xiyue (2008).
# YunQiang Su <wzssyqa@gmail.com>, 2010, 2011, 2012, 2013.
# Yangfl <mmyangfl@gmail.com>, 2017.
#
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: 2017-11-24 07:44+0000\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 2.18-dev\n"

#. Type: text
#. Description
#. eg. Virtual disk 1 (xvda)
#. :sl4:
#: ../partman-base.templates:64001
#, no-c-format
msgid "Virtual disk %s (%s)"
msgstr "虚拟磁盘 %s (%s)"

#. Type: text
#. Description
#. eg. Virtual disk 1, partition #1 (xvda1)
#. :sl4:
#: ../partman-base.templates:65001
#, no-c-format
msgid "Virtual disk %s, partition #%s (%s)"
msgstr "虚拟磁盘 %s，第 %s 分区 (%s)"

#. Type: text
#. Description
#. :sl4:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:58001
msgid "acls - support POSIX.1e Access Control List"
msgstr "acls - 支持 POSIX.1e 访问控制列表"

#. Type: text
#. Description
#. :sl4:
#. Note to translators: Please keep your translations of this string below
#. a 65 columns limit (which means 65 characters in single-byte languages)
#: ../partman-basicfilesystems.templates:59001
msgid "shortnames - only use the old MS-DOS 8.3 style filenames"
msgstr "shortnames - 只使用旧式 MS-DOS 8.3 风格文件名"

#. Type: text
#. Description
#. :sl4:
#: ../partman-target.templates:3001
msgid ""
"In order to start your new system, a so called boot loader is used.  It is "
"installed in a boot partition.  You must set the bootable flag for the "
"partition.  Such a partition will be marked with \"${BOOTABLE}\" in the main "
"partitioning menu."
msgstr ""
"为了能启动您的新系统，需要使用一个启动引导器软件。它安装在一个引导分区中。您"
"必须为此分区设置可启动(bootable)标志。在主分区菜单中，此分区会被标注"
"为“${BOOTABLE}”。"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:1001
#, no-c-format
msgid "!! ERROR: %s"
msgstr "[!! 错误]：%s"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:2001
msgid "KEYSTROKES:"
msgstr "[按键]："

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:3001
#, no-c-format
msgid "'%c'"
msgstr "“%c”"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:4001
msgid "Display this help message"
msgstr "显示此帮助信息"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:5001
msgid "Go back to previous question"
msgstr "返回上一个问题"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:6001
msgid "Select an empty entry"
msgstr "选择一个空条目"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:7001
#, no-c-format
msgid "Other choices are available with '%c' and '%c'"
msgstr "'%c' 与 '%c' 可选择其他选项"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:8001
#, no-c-format
msgid "Previous choices are available with '%c'"
msgstr "'%c' 可选择上一个选项"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:9001
#, no-c-format
msgid "Next choices are available with '%c'"
msgstr "'%c' 可选择下一个选项"

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:12001
#, no-c-format
msgid "Prompt: '%c' for help, default=%d> "
msgstr "提示：按“%c”获得帮助，默认值为 %d> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:13001
#, no-c-format
msgid "Prompt: '%c' for help> "
msgstr "提示：按“%c”获得帮助> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:14001
#, no-c-format
msgid "Prompt: '%c' for help, default=%s> "
msgstr "提示：按“%c”获得帮助，默认值为%s> "

#. Type: text
#. Description
#. :sl4:
#: ../cdebconf-text-udeb.templates:15001
msgid "[Press enter to continue]"
msgstr "[按回车键继续]"

#. Type: select
#. Description
#. :sl4:
#: ../cdebconf.templates:1001
msgid "Interface to use:"
msgstr "要使用的界面："

#. Type: select
#. Description
#. :sl4:
#: ../cdebconf.templates:1001
msgid ""
"Packages that use debconf for configuration share a common look and feel. "
"You can select the type of user interface they use."
msgstr ""
"使用 debconf 进行设置的软件包共享一个通用的外观。请选择设置过程将使用的用户界"
"面种类。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:2001
msgid "None"
msgstr "无"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:2001
msgid "'None' will never ask you any question."
msgstr "“无”表示不会询问任何问题。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:3001
msgid "Text"
msgstr "文本"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:3001
msgid "'Text' is a traditional plain text interface."
msgstr "“文本”是传统纯文本界面。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:4001
msgid "Newt"
msgstr "Newt"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:4001
msgid "'Newt' is a full-screen, character based interface."
msgstr "“Newt”是全屏字符界面。"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:5001
msgid "GTK"
msgstr "GTK"

#. Type: string
#. Description
#. :sl4:
#: ../cdebconf.templates:5001
msgid ""
"'GTK' is a graphical interface that may be used in any graphical environment."
msgstr "“GTK”是可以在任何图形环境中使用的图形界面。"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Failed to mount /target/proc"
msgstr "挂载 /target/proc 失败"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Mounting the proc file system on /target/proc failed."
msgstr "挂载 proc 文件系统到 /target/proc 上失败。"

#. Type: error
#. Description
#. :sl4:
#: ../nobootloader.templates:2001 ../grub-installer.templates:32001
msgid "Warning: Your system may be unbootable!"
msgstr "警告：您的系统可能将无法启动！"

#. Type: note
#. Description
#. :sl4:
#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001 ../nobootloader.templates:4001
msgid "Setting firmware variables for automatic boot"
msgstr "正在为自动启动设置固件变量"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001
msgid ""
"Some variables need to be set in the Genesi firmware in order for your "
"system to boot automatically.  At the end of the installation, the system "
"will reboot.  At the firmware prompt, set the following firmware variables "
"to enable auto-booting:"
msgstr ""
"要使系统能自动启动您的系统，您需要在 Genesi 固件中设置一些变量。在安装结束"
"后，系统将会重启。在出现固件提示符后，请设置以下固件变量以开启自动启动功能："

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. :sl4:
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../nobootloader.templates:3001 ../arcboot-installer.templates:5001
msgid ""
"You will only need to do this once.  Afterwards, enter the \"boot\" command "
"or reboot the system to proceed to your newly installed system."
msgstr ""
"此过程只需要被执行一次。然后，请输入“boot”命令或重启系统以进入您新安装好的系"
"统。"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:3001
msgid ""
"Alternatively, you will be able to boot the kernel manually by entering, at "
"the firmware prompt:"
msgstr "另外，您可以在固件提示符下输入以下内容来手工启动内核："

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"Some variables need to be set in CFE in order for your system to boot "
"automatically. At the end of installation, the system will reboot. At the "
"firmware prompt, set the following variables to simplify booting:"
msgstr ""
"要使系统能自动启动您的系统，您需要在 CFE 中设置一些变量。在安装结束后，系统将"
"会重启。在出现固件提示符后，请设置以下变量以简化启动过程："

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"You will only need to do this once. This enables you to just issue the "
"command \"boot_debian\" at the CFE prompt."
msgstr ""
"您只需执行一次此操作。从此之后您只要在 CFE 提示符下使用“boot_debian”命令就可"
"以了。"

#. Type: note
#. Description
#. :sl4:
#: ../nobootloader.templates:4001
msgid ""
"If you prefer to auto-boot on every startup, you can set the following "
"variable in addition to the ones above:"
msgstr ""
"如果想要在每次开机时都自动启动，您可以在上面提到的变量之外再设置下列变量："

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid "Install GRUB?"
msgstr "安装 GRUB？"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid ""
"GRUB 2 is the next generation of GNU GRUB, the boot loader that is commonly "
"used on i386/amd64 PCs. It is now also available for ${ARCH}."
msgstr ""
"GRUB 2 是新一代的 GNU GRUB，主要在 i386/amd64 PC 机上使用的引导器。它现在也可"
"以用于 ${ARCH}。"

#. Type: boolean
#. Description
#. :sl4:
#: ../grub-installer.templates:17001
msgid ""
"It has interesting new features but is still experimental software for this "
"architecture. If you choose to install it, you should be prepared for "
"breakage, and have an idea on how to recover your system if it becomes "
"unbootable. You're advised not to try this in production environments."
msgstr ""
"它有很多新特性但是在此架构上仍然处理试验阶段。如果您选择安装它，您需要做好发"
"生损坏的准备，并且知晓系统不能启动时如何恢复。建议不要在生产环境中尝试。"

#. Type: text
#. Description
#. :sl4:
#: ../arcboot-installer.templates:1001
msgid "Install the Arcboot boot loader on a hard disk"
msgstr "将 Arcboot 启动引导器安装至硬盘"

#. Type: string
#. Description
#. :sl4:
#: ../arcboot-installer.templates:2001
msgid "Disk for boot loader installation:"
msgstr "安装启动引导器的磁盘："

#. Type: string
#. Description
#. :sl4:
#: ../arcboot-installer.templates:2001
msgid ""
"Arcboot must be installed into the volume header of a disk with a SGI "
"disklabel. Usually the volume header of /dev/sda is used. Please give the "
"device name of the disk on which to put arcboot."
msgstr ""
"Arcboot 必须安装在具有 SGI 磁盘卷标的磁盘卷首部。通常被使用的是 /dev/sda。请"
"给出要安装 arcboot 的磁盘的设备名。"

#. Type: note
#. Description
#. :sl4:
#: ../arcboot-installer.templates:3001
msgid "Arcboot configured to use a serial console"
msgstr "Arcboot 被配置为使用串行控制台"

#. Type: note
#. Description
#. :sl4:
#: ../arcboot-installer.templates:3001
msgid ""
"Arcboot is configured to use the serial port ${PORT} as the console. The "
"serial port speed is set to ${SPEED}."
msgstr ""
"Arcboot 被配置为使用串行端口 ${PORT} 作为控制台。串行端口速度被设为 "
"${SPEED}。"

#. Type: boolean
#. Description
#. :sl4:
#: ../arcboot-installer.templates:4001
msgid "Arcboot installation failed.  Continue anyway?"
msgstr "Arcboot 安装失败。仍然继续吗？"

#. Type: boolean
#. Description
#. :sl4:
#: ../arcboot-installer.templates:4001
msgid ""
"The arcboot package failed to install into /target/.  Installing Arcboot as "
"a boot loader is a required step.  The install problem might however be "
"unrelated to Arcboot, so continuing the installation may be possible."
msgstr ""
"无法将 arcboot 软件包安装到 /target/ 中。安装 Arcboot 作为启动引导器是一个必"
"要步骤。此安装问题可能并非直接由 Arcboot 引起，因此继续进行安装也许是可行的。"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:5001
msgid "Setting PROM variables for Arcboot"
msgstr "正在为 Arcboot 设置 PROM 变量"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:5001
msgid ""
"If this is the first Linux installation on this machine, or if the hard "
"drives have been repartitioned, some variables need to be set in the PROM "
"before the system is able to boot normally."
msgstr ""
"如果这是第一次在这台机器上安装 Linux，或者对硬盘进行了重新分区，那么在系统能"
"正常启动前，您需要在 PROM 中设置一些变量。"

#. Type: note
#. Description
#. :sl4:
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#. "Stop for Maintenance" should be left in English
#: ../arcboot-installer.templates:5001
msgid ""
"At the end of this installation stage, the system will reboot.  After this, "
"enter the command monitor from the \"Stop for Maintenance\" option, and "
"enter the following commands:"
msgstr ""
"在此安装阶段结束时，系统将被重启。然后，请通过“Stop for Maintenance”选项进入 "
"command monitor，并输入以下命令："

#. Type: text
#. Description
#. :sl4:
#: ../partman-nbd.templates:1001
msgid "Configure the Network Block Device"
msgstr "配置网络块设备"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:2001
msgid "NBD configuration action:"
msgstr "NBD 配置动作："

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:2001
msgid "There are currently ${NUMBER} devices connected."
msgstr "当前连接了 ${NUMBER} 个设备。"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:3001
msgid "Network Block Device server:"
msgstr "网络块设备服务器："

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:3001
msgid ""
"Please enter the host name or the IP address of the system running nbd-"
"server."
msgstr "请输入运行着 nbd-server 的系统的主机名或 IP。"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:4001
msgid "Name for NBD export"
msgstr "NBD export 名称"

#. Type: string
#. Description
#. :sl4:
#: ../partman-nbd.templates:4001
msgid ""
"Please enter the NBD export name needed to access nbd-server. The name "
"entered here should match an existing export on the server."
msgstr ""
"请输入连接 nbd-server 所需的 NBD export 名称。该名称应该要符合目前在服务器中"
"的 export。"

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:5001
msgid "Network Block Device device node:"
msgstr "网络块设备节点："

#. Type: select
#. Description
#. :sl4:
#: ../partman-nbd.templates:5001
msgid ""
"Please select the NBD device node that you wish to connect or disconnect."
msgstr "请选择要连接或断开的 NBD 设备节点。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:6001
msgid "Failed to connect to the NBD server"
msgstr "连接 NBD 服务器失败"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:6001
msgid ""
"Connecting to the nbd-server failed. Please ensure that the host and the "
"export name which you entered are correct, that the nbd-server process is "
"running on that host, that the network is configured correctly, and retry."
msgstr ""
"配置 nbd-server 失败。请检查输入的主机和 export 名是否正确，确认该主机运行 "
"nbd-server 程序，确保网络配置正确，然后重试。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid "No more Network Block Device nodes left"
msgstr "没有剩下的网络块设备节点了"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid ""
"Either all available NBD device nodes are in use or something went wrong "
"with the detection of the device nodes."
msgstr "可能是所有可用的 NBD 设备节点都正在使用，或者探测时发生了一些错误。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:7001
msgid ""
"No more NBD device nodes can be configured until a configured one is "
"disconnected."
msgstr "没有更多的 NBD 设备节点可以配置，直到断开一个已经配置了的。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:8001
msgid "No connected Network Block Device nodes were found"
msgstr "没有发现已连接的网络块设备。"

#. Type: error
#. Description
#. :sl4:
#: ../partman-nbd.templates:8001
msgid ""
"There are currently no Network Block Device nodes connected to any server. "
"As such, you can't disconnect any of them."
msgstr "当前没有网络块设备节点连接当任何服务器。因此您不能断开任何一个。"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:9001
msgid "Connect a Network Block Device"
msgstr "连接一个网络块设备"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:10001
msgid "Disconnect a Network Block Device"
msgstr "断开一个网络块设备"

#. Type: text
#. Description
#. :sl4:
#. Menu entry
#. Use infinite form
#: ../partman-nbd.templates:11001
msgid "Finish and return to the partitioner"
msgstr "完成并返回到分区管理界面"

#. Type: text
#. Description
#. This item is a progress bar heading when the system configures
#. some flashable memory used by many embedded devices
#. :sl4:
#: ../flash-kernel-installer.templates:1001
msgid "Configuring flash memory to boot the system"
msgstr "正在配置闪存以启动系统"

#. Type: text
#. Description
#. This item is a progress bar heading when an embedded device is
#. configured so it will boot from disk
#. :sl4:
#: ../flash-kernel-installer.templates:2001
msgid "Making the system bootable"
msgstr "正在使系统可启动"

#. Type: text
#. Description
#. This is "preparing the system" to flash the kernel and initrd
#. on a flashable memory
#. :sl4:
#: ../flash-kernel-installer.templates:3001
msgid "Preparing the system..."
msgstr "正在准备系统..."

#. Type: text
#. Description
#. This is a progress bar showing up when the system
#. write the kernel to the flashable memory of the embedded device
#. :sl4:
#: ../flash-kernel-installer.templates:4001
msgid "Writing the kernel to flash memory..."
msgstr "正在将内核写入闪存..."

#. Type: text
#. Description
#. This is a progress bar showing up when the system generates a
#. special boot image on disk for some embedded device so they
#. can boot.
#. :sl4:
#: ../flash-kernel-installer.templates:5001
msgid "Generating boot image on disk..."
msgstr "正在在磁盘上创建启动镜像..."

#. Type: text
#. Description
#. Main menu item
#. This item is a menu entry for a step where the system configures
#. the flashable memory used by many embedded devices
#. (writing the kernel and initrd to it)
#. :sl4:
#: ../flash-kernel-installer.templates:6001
msgid "Make the system bootable"
msgstr "使系统可启动"