#
# Templates for the s390-zfcp debian installer module
#
# They are, on purpose, not marked for translation

Template: debian-installer/s390-zfcp/title
Type: text
Description: Activate FCP devices for installation


Template: s390-zfcp/zfcp
Type: string
Description: for internal use; preseeding only
 Enables one ore more SCSI devices for the installation.  Use the
 comma (,) to separate multiple entries.  An entry consists of a
 zfcp host adapter only or a zfcp host adapter followed by the WWPN
 and LUN, separated by a colon (:).  For example,
 0.0.1234,0.0.5678:0x2005000e11159c32:0x1234567800000000


Template: s390-zfcp/no_zfcp_hosts
Type: note
Description: No FCP adapters available for installation
 Try to use DASDs for installation.

Template: s390-zfcp/select_zfcp_host
Type: select
Choices: ${choices}, Finish
Description: Available FCP devices:
 The following FCP devices are available for installation.  Select
 each FCP device you want to activate for accessing FC-attached
 SCSI devices.  Depending on your FCP device configuration, you
 will be asked further setup questions.
 .
 Select "Finish" when you have all FCP devices activated for your
 installation.

Template: s390-zfcp/remove_zfcp_config
Type: boolean
Default: false
Description: Do you want to remove the FCP device configuration?
 Confirm removing the FCP device configuration. If you choose this,
 the FCP device configuration file is removed. Otherwise, you can
 update the current FCP device configuration.


Template: s390-zfcp/add_zfcp_luns
Type: select
Choices: ${LUNS}, Add LUN, Finish
# XXX add FCP device number in description ???
Description: Available LUNs for installation:
 The following list displays the LUNs that are available for installation.
 Select "Add LUN" to attach a SCSI device through its LUN.  When you have
 added the LUNs that you need for installation, select "Finish".

Template: s390-zfcp/get_lun
Type: string
Description: WWPN and LUN for the SCSI device:
 Specify the worldwide port name (WWPN) of the target port and the logical unit
 number (LUN) to attach a particular SCSI disk.  The WWPN and LUN each consists
 of 16 hexadecimal digits.  Separate the WWPN and LUN with a colon (:).
 For example, 0x2005000e11159c32:0x1234567800000000.

Template: s390-zfcp/remove_lun
Type: boolean
Default: false
Description: Do you want to remove the LUN ${LUN}?
 Confirm removal of the specified LUN.

Template: s390-zfcp/invalid_lun_fmt
Type: error
Description: Could not recognize the specified LUN
 The specified LUN could not be recognized.  Specify a valid WWPN and LUN
 value which are separated by a colon (:).

Template: s390-zfcp/invalid_wwpn_or_lun
Type: error
Description: The specified WWPN or LUN is not valid
 Ensure that you specify the WWPN and LUN value as hexadecimal value,
 each consisting of up to 16 hexadecimal digits.

Template: s390-zfcp/port_not_found
Type: error
Description: Could not found the specified target port
 The requested SCSI device could not be attached.  The target port that was
 specified with the WWPN could not be found.  Ensure you specified the
 correct WWPN value.

Template: s390-zfcp/lun_not_added
Type: error
Description: Could not add the specified LUN
 The requested SCSI device could not be attached. The specified LUN could
 not be added to the specified target port.  Ensure you specified the
 correct LUN and, respectively, WWPN.

Template: s390-zfcp/lun_not_removed
Type: error
Description: Could not remove the specified LUN
 The requested SCSI device could not be removed.

Template: s390-zfcp/udev_progress
Type: text
Description: Detecting SCSI devices...