#! /bin/sh

set -e
. /usr/share/debconf/confmodule
#set -x

log() {
	logger -t cdrom-detect "$@"
}

fail() {
	log "CDROM-detect failed; unmounting CD just to be sure"
	umount /cdrom 2>/dev/null || true
	exit 1
}

try_mount() {
	local device=$1
	local type=$2

	local ret=1
	if mount -t $type -o $OPTIONS $device /cdrom; then
		log "CD-ROM mount succeeded: device=$device fstype=$type"
		if [ -e /cdrom/.disk/info ]; then
			CDNAME=$(cat /cdrom/.disk/info)
			log "Detected CD '$CDNAME'"
			db_set cdrom-detect/cdrom_device $device
			db_set cdrom-detect/cdrom_fs $type
			ret=0
		else
			log "The CD in $device is not a Debian CD!"
			umount /cdrom 2>/dev/null || true
			WRONG=1
		fi
	else
		log "CD-ROM mount failed: device=$device fstype=$type"
	fi

	return $ret
}

# Set the suite and codename used by base-installer and base-config
# to the suite/codename that is on the CD. In case there are multiple
# suites, prefer the one in default-release.
set_suite_and_codename() {
	for dir in $(cat /etc/default-release) $(ls -1 /cdrom/dists/); do
		relfile="/cdrom/dists/$dir/Release"
		if [ -e $relfile ]; then
			suite=$(sed -n 's/^Suite: *//p' "$relfile")
			codename=$(sed -n 's/^Codename: *//p' "$relfile")
			log "Detected CD with '$suite' ($codename) distribution"
			db_set cdrom/suite "$suite"
			db_set cdrom/codename "$codename"

			break
		fi
	done
}

OS=$(udpkg --print-os)
case "$OS" in
	kfreebsd)
		CDFS=cd9660
		FATFS=msdosfs
		OPTIONS=ro,exec
		;;
	linux)
		CDFS=iso9660
		FATFS=vfat
		OPTIONS=ro,exec
		;;
	hurd)
		CDFS=iso9660fs
		FATFS=fatfs
		OPTIONS=ro
		;;
	*)
		log "Unknown OS '$OS', exiting"
		exit 0
		
esac
 
# Is a cdrom already mounted? If so, assume it's the right one.
mount | grep -q 'on /cdrom' && set_suite_and_codename && exit 0
if [ -e /cdrom/.disk/info ]; then
	CDNAME=$(cat /cdrom/.disk/info)
	log "Detected CD '$CDNAME'"
	set_suite_and_codename
	exit 0
fi

# Don't worry about firmware just yet:
CHECK_MISSING_FIRMWARE=0 hw-detect cdrom-detect/detect_progress_title || true

log "Searching for Debian installation media..."

mkdir /cdrom 2>/dev/null || true

# Need to wait for the usb device scan to complete
if [ "$OS" = "linux" ]; then
  for count in 1 2 3 4 5 6 8 9 10; do
    devices="$(list-devices cd; list-devices maybe-usb-floppy)"
    log "Devices: '$devices'"
    if [ -n "$devices" ]; then
      break 2
    else
      sleep 1
    fi
  done
fi

while true; do
	WRONG=

	devices="$(list-devices cd; list-devices maybe-usb-floppy)"
	for device in $devices; do
		if try_mount $device $CDFS; then
			break 2
		fi
	done
	
	devices="$(list-devices usb-partition; list-devices disk)"
	for device in $devices; do
		if try_mount $device $CDFS; then
			db_set cdrom-detect/hybrid true
			break 2
		fi
		if try_mount $device $FATFS; then
			db_set cdrom-detect/usb-hdd true
			break 2
		fi
	done


	if [ "$WRONG" ]; then
		db_input critical cdrom-detect/wrong-cd || [ $? -eq 30 ]
		db_go
		fail
	fi

	# If a device was detected but the mount failed, ask for the CD.
	if [ -n "$devices" ]; then
		db_input critical cdrom-detect/retry || [ $? -eq 30 ]
		db_go
		db_get cdrom-detect/retry
		if [ "$RET" = "true" ]; then
			log "Unmounting CD just to be sure"
			umount /cdrom 2>/dev/null || true
			continue
		else
			fail
		fi
	fi
 
	# If no device was detected, perhaps a driver floppy is needed.
	if [ -e /usr/lib/debian-installer/retriever/media-retriever ]; then
		db_input critical cdrom-detect/load_media
		db_go
		db_get cdrom-detect/load_media
		if [ "$RET" = true ]; then
			anna media-retriever
			# Don't worry about firmware just yet:
			CHECK_MISSING_FIRMWARE=0 hw-detect cdrom-detect/detect_progress_title || true
			continue
		fi
	fi
    
	# Otherwise manual configuration may be needed
	db_input critical cdrom-detect/manual_config || [ $? -eq 30 ]
	db_go
	db_get cdrom-detect/manual_config

	if [ "$RET" = true ]; then
		case "$OS" in
			linux)
				modules=none
				for i in $(ls -1 /lib/modules/*/kernel/drivers/cdrom/ | \
					   sed 's/\.ko$//' | sed 's/\.o$//'); do
					modules="$modules, $i"
				done  

				db_subst cdrom-detect/cdrom_module choices "$modules"
				db_input critical cdrom-detect/cdrom_module || [ $? -eq 30 ]
				db_go

				db_get cdrom-detect/cdrom_module
				if [ "$RET" != none ]; then
					modprobe $RET
				fi
				;;
			kfreebsd)
				modules=none
				for i in $(ls -1 /lib/modules/$(uname -r)/ | \
					   sed 's/\.ko$//'); do
					modules="$modules, $i"
				done

				db_subst cdrom-detect/cdrom_module choices "$modules"
				db_input critical cdrom-detect/cdrom_module || [ $? -eq 30 ]
				db_go
				
				db_get cdrom-detect/cdrom_module
				if [ "$RET" != none ]; then
					kldload $RET
				fi
				;;
		esac

		db_input critical cdrom-detect/cdrom_device || [ $? -eq 30 ]
		db_go

		db_get cdrom-detect/cdrom_device
		device="$RET"

		if mount -t $CDFS -o $OPTIONS $device /cdrom; then
			log "CD-ROM mount succeeded: device=$device fstype=$CDFS"
			db_set cdrom-detect/cdrom_fs $CDFS
			break
		else
			log "CD-ROM mount failed: device=$device fstype=$CDFS"
			fail
		fi
	else
		fail
	fi
done

# Check for unetbootin files
UNETBOOTIN_FILES="ubnfilel.txt ubninit ubnkern ubnpathl.txt"
UNETBOOTIN_DETECTED=0
for file in ${UNETBOOTIN_FILES}; do
	if [ -f /cdrom/$file ] ; then
		UNETBOOTIN_DETECTED=1
		break
	fi
done

# If we found any, warn the user
if [ $UNETBOOTIN_DETECTED = 1 ]; then
	db_input critical cdrom-detect/unetbootin_detected || [ $? -eq 30 ]
	db_go
fi

# Get all the pool directories into the dentry cache, to cut down on seek
# times.
poolcount="$(set -- /cdrom/pool/*/*; echo $#)"
db_progress START 0 "$poolcount" cdrom-detect/scanning_progress_title
for pooldir in /cdrom/pool/*/*; do
	if [ -d "$pooldir" ]; then
		db_subst cdrom-detect/scanning_progress_step DIR "$pooldir"
		db_progress INFO cdrom-detect/scanning_progress_step
		log-output --pass-stdout -t cdrom-detect find "$pooldir/" >/dev/null || true
	fi
	db_progress STEP 1
done
db_progress STOP

set_suite_and_codename

if [ -z "$suite" ]; then
	log "Error reading Release file; unable to determine distribution"
	db_input critical cdrom-detect/no-release || [ $? -eq 30 ]
	db_go
	fail
fi

# Install eject-udeb, to be able to use it in the finish-install script.
anna-install eject-udeb || true

# Hey, we're done
db_subst cdrom-detect/success cdname "$CDNAME"
db_input low cdrom-detect/success || [ $? -eq 30 ]
db_go

anna-install apt-mirror-setup || true
if [ ! -e /cdrom/.disk/base_installable ]; then
	log "Base system not installable from CD, requesting choose-mirror"
	anna-install choose-mirror || true
else
	anna-install apt-cdrom-setup || true

	# Install <codename>-support udeb (if available).
	db_get cdrom/codename
	anna-install $RET-support || true
fi

exit 0