Running as unit: rb-build-amd64_1-30992.service ==================================================================================== Sat Feb 22 10:05:43 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_1) on jenkins, called using "ionos1-amd64 ionos5-amd64" as arguments. Sat Feb 22 10:05:43 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-kcaz1Gcw" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Feb 22 10:05:44 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Sat Feb 22 10:05:44 UTC 2025 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-pl5g6k' Sat Feb 22 10:05:44 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos5-amd64.debian.net is marked as down. Sat Feb 22 10:05:44 UTC 2025 - checking via ssh if ionos5-amd64.debian.net is up. removed '/tmp/read-only-fs-test-XcqJQs' ok, let's check if libdevice-usb-perl is building anywhere yet… ok, libdevice-usb-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libdevice-usb-perl in trixie on amd64 on jenkins now. 1st build will be done on ionos1-amd64.debian.net. 2nd build will be done on ionos5-amd64.debian.net. ============================================================================= Sat Feb 22 10:05:49 UTC 2025 I: starting to build libdevice-usb-perl/trixie/amd64 on jenkins on '2025-02-22 10:05' Sat Feb 22 10:05:49 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_1/30992/console.log 1740218749 amd64 trixie libdevice-usb-perl Sat Feb 22 10:05:49 UTC 2025 I: Downloading source for trixie/libdevice-usb-perl=0.38-3 --2025-02-22 10:05:49-- http://deb.debian.org/debian/pool/main/libd/libdevice-usb-perl/libdevice-usb-perl_0.38-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2399 (2.3K) [text/prs.lines.tag] Saving to: ‘libdevice-usb-perl_0.38-3.dsc’ 0K .. 100% 258M=0s 2025-02-22 10:05:49 (258 MB/s) - ‘libdevice-usb-perl_0.38-3.dsc’ saved [2399/2399] --2025-02-22 10:05:49-- http://deb.debian.org/debian/pool/main/libd/libdevice-usb-perl/libdevice-usb-perl_0.38-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2399 (2.3K) [text/prs.lines.tag] Saving to: ‘libdevice-usb-perl_0.38-3.dsc’ 0K .. 100% 258M=0s 2025-02-22 10:05:49 (258 MB/s) - ‘libdevice-usb-perl_0.38-3.dsc’ saved [2399/2399] Sat Feb 22 10:05:49 UTC 2025 I: libdevice-usb-perl_0.38-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdevice-usb-perl Binary: libdevice-usb-perl Architecture: any Version: 0.38-3 Maintainer: Debian Perl Group Uploaders: Damyan Ivanov Homepage: https://github.com/gwadej/perl-device-usb/ Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libinline-c-perl, libinline-perl, libusb-dev, perl-xs-dev, perl:native Package-List: libdevice-usb-perl deb perl optional arch=any Checksums-Sha1: 155d3a4ca9d9b57fb9953c94a5e87c476f276ce0 26021 libdevice-usb-perl_0.38.orig.tar.gz 0101dde356d343f1d61d3b6efa3158fa942e33fd 5212 libdevice-usb-perl_0.38-3.debian.tar.xz Checksums-Sha256: f0c36379db4913406dc9bd546a6cfd4da20d58f7c2cc085893a2fe67a43465dc 26021 libdevice-usb-perl_0.38.orig.tar.gz 2cc9e639f373db40e88d55303867c55a2a9262a151a68e7c01fac2ab2a50b80c 5212 libdevice-usb-perl_0.38-3.debian.tar.xz Files: 79bdae7c907a873e3085da5ceb7c1f2f 26021 libdevice-usb-perl_0.38.orig.tar.gz dfbee26083b3013a5fcf536cb279cf47 5212 libdevice-usb-perl_0.38-3.debian.tar.xz Dgit: 78888ccf54d09a7fd000c3b316577c2ad4f972f0 debian archive/debian/0.38-3 https://git.dgit.debian.org/libdevice-usb-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmXnI2pfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgY25w/9EB/deYx4JL3vhJOB+bkUmmFvRfBQ8cF2XYU8KINHVJUj85ne2Jj76Gqo Vgou9OptOtdjAzBWlzQf5bbcYt99PA+a55Lzw0zV5zWJxOMgWBwjQyVntX1EqL4U potPQwKVOiQTJTAw8Gz+Z3fYiOUPPP1ESiPwtZRgm+QpIDYZE2GCBBUQeJ5E8yDR 6KYrzOSrjjYJDtFDXjoYO0FLYMu9iyE0NmxLBiInVkoP1Q6LM+1L+c610pOLGqu2 rLPrSsrUXOdKf0UdDxlpyjzqIXzy8QJpbj8cKYRtFe+TR8Ub3TAZc7ia55azPnkN g8lwbfTTRRTkaAAQ9q1qv82cOiMnFG6qq8raJaOasWCZUSVNe/7ctcohM2aqit/U zeEaKI6r3BvXwsWLXzLofLxj6rG5oJ15y/Inumpgng/ULf0DC8RhC9/S8wIMdo1W 7OeGxZq2yP9P+C7ah5z1WpPovNnvmbMTzFi8zBvo5ju7HGOG/Nc/M9OxTIxz1lc3 Ur1f+9//Bvtq3VFhP14PwCfKqly5dTrllr2kvix2xsrZ4hzuETruS8++CdiDH6Nl wimXquW1NbnU/jZ4GS9m8ER12HBSHSkZ8ROpyMbBkUxZbPaw33K2yLeiLbIl2+/3 vpmuWIrllDWucepMT1xG8/jjlgYiOiu0cTUf8BSaw8jZr38CIic= =kuE5 -----END PGP SIGNATURE----- Sat Feb 22 10:05:49 UTC 2025 I: Checking whether the package is not for us Sat Feb 22 10:05:49 UTC 2025 I: Starting 1st build on remote node ionos1-amd64.debian.net. Sat Feb 22 10:05:49 UTC 2025 I: Preparing to do remote build '1' on ionos1-amd64.debian.net. Sat Feb 22 10:05:49 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Sat Feb 22 10:05:49 UTC 2025 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-duROoB' ==================================================================================== Sat Feb 22 10:05:50 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos1-amd64, called using "1 libdevice-usb-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW 0.38-3" as arguments. Sat Feb 22 10:05:50 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-jht3slhG" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Feb 22 10:05:51 UTC 2025 I: Downloading source for trixie/libdevice-usb-perl=0.38-3 Reading package lists... NOTICE: 'libdevice-usb-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 33.6 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (dsc) [2399 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (tar) [26.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (diff) [5212 B] Fetched 33.6 kB in 0s (713 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdevice-usb-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 33.6 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (dsc) [2399 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (tar) [26.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (diff) [5212 B] Fetched 33.6 kB in 0s (713 kB/s) Download complete and in download only mode ============================================================================= Building libdevice-usb-perl in trixie on amd64 on ionos1-amd64 now. Date: Sat Feb 22 10:05:51 UTC 2025 Date UTC: Sat Feb 22 10:05:51 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Feb 21 22:05:52 -12 2025 I: pbuilder-time-stamp: 1740218752 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdevice-usb-perl_0.38-3.dsc] I: copying [./libdevice-usb-perl_0.38.orig.tar.gz] I: copying [./libdevice-usb-perl_0.38-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdevice-usb-perl_0.38-3.dsc: unsupported subcommand dpkg-source: info: extracting libdevice-usb-perl in libdevice-usb-perl-0.38 dpkg-source: info: unpacking libdevice-usb-perl_0.38.orig.tar.gz dpkg-source: info: unpacking libdevice-usb-perl_0.38-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying disable-tests dpkg-source: info: applying fix-typo dpkg-source: info: applying fix-buildsystem dpkg-source: info: applying just-assume-libusb-is-there.diff dpkg-source: info: applying hardening-flags.diff I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3412050/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='f037cad732e6416d94f654a2378bbe73' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3412050' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_HKMO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1 --logfile b1/build.log libdevice-usb-perl_0.38-3.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos1-amd64 6.1.0-31-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.128-1 (2025-02-07) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3412050/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libinline-c-perl, libinline-perl, libusb-dev, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19858 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libinline-c-perl; however: Package libinline-c-perl is not installed. pbuilder-satisfydepends-dummy depends on libinline-perl; however: Package libinline-perl is not installed. pbuilder-satisfydepends-dummy depends on libusb-dev; however: Package libusb-dev is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libinline-c-perl{a} libinline-perl{a} libmagic-mgc{a} libmagic1t64{a} libparse-recdescent-perl{a} libpegex-perl{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libusb-0.1-4{a} libusb-dev{a} libxml2{a} libxxx-perl{a} libyaml-pp-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libinline-files-perl libltdl-dev libmail-sendmail-perl libtie-ixhash-perl lynx wget 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 22.2 MB of archives. After unpacking 85.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-3 [92.1 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-5 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libparse-recdescent-perl all 1.967015+dfsg-4 [147 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libinline-perl all 0.86-2 [83.7 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libyaml-pp-perl all 0.39.0-1 [111 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libxxx-perl all 0.38-1 [11.2 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libpegex-perl all 0.75-2 [77.8 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libinline-c-perl all 0.82-1 [75.9 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.1-2 [1109 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libusb-0.1-4 amd64 2:0.1.12-35+b1 [17.1 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libusb-dev amd64 2:0.1.12-35+b1 [31.7 kB] Fetched 22.2 MB in 4s (5921 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19858 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-3_amd64.deb ... Unpacking bsdextrautils (2.40.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_amd64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libparse-recdescent-perl. Preparing to unpack .../30-libparse-recdescent-perl_1.967015+dfsg-4_all.deb ... Unpacking libparse-recdescent-perl (1.967015+dfsg-4) ... Selecting previously unselected package libinline-perl. Preparing to unpack .../31-libinline-perl_0.86-2_all.deb ... Unpacking libinline-perl (0.86-2) ... Selecting previously unselected package libyaml-pp-perl. Preparing to unpack .../32-libyaml-pp-perl_0.39.0-1_all.deb ... Unpacking libyaml-pp-perl (0.39.0-1) ... Selecting previously unselected package libxxx-perl. Preparing to unpack .../33-libxxx-perl_0.38-1_all.deb ... Unpacking libxxx-perl (0.38-1) ... Selecting previously unselected package libpegex-perl. Preparing to unpack .../34-libpegex-perl_0.75-2_all.deb ... Unpacking libpegex-perl (0.75-2) ... Selecting previously unselected package libinline-c-perl. Preparing to unpack .../35-libinline-c-perl_0.82-1_all.deb ... Unpacking libinline-c-perl (0.82-1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../36-libperl-dev_5.40.1-2_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-2) ... Selecting previously unselected package libusb-0.1-4:amd64. Preparing to unpack .../37-libusb-0.1-4_2%3a0.1.12-35+b1_amd64.deb ... Unpacking libusb-0.1-4:amd64 (2:0.1.12-35+b1) ... Selecting previously unselected package libusb-dev. Preparing to unpack .../38-libusb-dev_2%3a0.1.12-35+b1_amd64.deb ... Unpacking libusb-dev (2:0.1.12-35+b1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-pp-perl (0.39.0-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libperl-dev:amd64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libusb-0.1-4:amd64 (2:0.1.12-35+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up libxxx-perl (0.38-1) ... Setting up dwz (0.15-1+b1) ... Setting up libparse-recdescent-perl (1.967015+dfsg-4) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libpegex-perl (0.75-2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up libinline-perl (0.86-2) ... Setting up libinline-c-perl (0.82-1) ... Setting up libusb-dev (2:0.1.12-35+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libdevice-usb-perl-0.38/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevice-usb-perl_0.38-3_source.changes dpkg-buildpackage: info: source package libdevice-usb-perl dpkg-buildpackage: info: source version 0.38-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Warning: the following files are missing in your kit: USB.pm Please inform the author. Generating a Unix-style Makefile Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json dh_auto_build make -j20 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' cp lib/Device/USB/Device.pm blib/lib/Device/USB/Device.pm cp lib/Device/USB/DevConfig.pm blib/lib/Device/USB/DevConfig.pm cp lib/Device/USB/Bus.pm blib/lib/Device/USB/Bus.pm cp lib/Device/USB/DevInterface.pm blib/lib/Device/USB/DevInterface.pm cp lib/Device/USB.pm blib/lib/Device/USB.pm cp lib/Device/USB/DevEndpoint.pm blib/lib/Device/USB/DevEndpoint.pm cp lib/Device/USB/FAQ.pod blib/lib/Device/USB/FAQ.pod "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Device -e"my %A = (modinlname => 'Device-USB-Device.inl', module => 'Device::USB::Device'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevInterface -e"my %A = (modinlname => 'Device-USB-DevInterface.inl', module => 'Device::USB::DevInterface'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB -e"my %A = (modinlname => 'Device-USB.inl', module => 'Device::USB'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Bus -e"my %A = (modinlname => 'Device-USB-Bus.inl', module => 'Device::USB::Bus'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevConfig -e"my %A = (modinlname => 'Device-USB-DevConfig.inl', module => 'Device::USB::DevConfig'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevEndpoint -e"my %A = (modinlname => 'Device-USB-DevEndpoint.inl', module => 'Device::USB::DevEndpoint'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch validate Stage Starting Build Preprocess Stage get_maps Stage Finished Build Preprocess Stage Starting Build Parse Stage Finished Build Parse Stage Starting Build Glue 1 Stage Finished Build Glue 1 Stage Starting Build Glue 2 Stage Finished Build Glue 2 Stage Starting Build Glue 3 Stage Finished Build Glue 3 Stage Starting Build Compile Stage Starting "perl Makefile.PL" Stage Generating a Unix-style Makefile Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json Finished "perl Makefile.PL" Stage Starting "make" Stage make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Running Mkbootstrap for USB () chmod 644 "USB.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- USB.bs blib/arch/auto/Device/USB/USB.bs 644 "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.40/ExtUtils/typemap" USB.xs > USB.xsc mv USB.xsc USB.c x86_64-linux-gnu-gcc -c -iquote"/build/reproducible-path/libdevice-usb-perl-0.38" -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -O2 -g -DVERSION=\"0.38\" -DXS_VERSION=\"0.38\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" USB.c rm -f blib/arch/auto/Device/USB/USB.so x86_64-linux-gnu-gcc -shared -L/usr/local/lib -fstack-protector-strong -shared -L/usr/local/lib -fstack-protector-strong -Wl,-z,relro -Wl,-z,now USB.o -o blib/arch/auto/Device/USB/USB.so \ -lusb \ chmod 755 blib/arch/auto/Device/USB/USB.so make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Finished "make" Stage Starting "make install" Stage make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- USB.bs blib/arch/auto/Device/USB/USB.bs 644 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/blib/arch/auto/Device/USB/USB.so make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Finished "make install" Stage Starting Cleaning Up Stage Finished Cleaning Up Stage Finished Build Compile Stage cp bin/dump_usb.pl blib/script/dump_usb.pl "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/dump_usb.pl Manifying 1 pod document Manifying 7 pod documents make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_test make -j20 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t # Testing Device::USB 0.38, Perl 5.040001, /usr/bin/perl t/00-load.t ....................... 1..1 ok 1 - use Device::USB; ok t/01-create-usb.t ................. 1..2 ok 1 - Object successfully created ok 2 - An object of class 'Device::USB' isa 'Device::USB' ok t/02-find_busses_devices.t ........ 1..2 ok 1 - Object successfully created ok 2 - Device::USB->can(...) ok t/03-list_busses.t ................ ok 1 - Object successfully created ok 2 - Device::USB->can('list_busses') ok 3 - USB busses found ok 4 - 'An array of busses returned.' isa 'ARRAY' 1..4 ok t/04-find_device.t ................ 1..8 ok 1 - Object successfully created ok 2 - Device::USB->can('find_device') ok 3 - No device found ok 4 - USB busses found ok 5 # skip No USB devices installed ok 6 # skip No USB devices installed ok 7 # skip No USB devices installed ok 8 # skip No USB devices installed ok t/05-find_device_if.t ............. 1..11 ok 1 - Object successfully created ok 2 - Device::USB->can('find_device_if') ok 3 - No device found ok 4 - Requires a predicate. ok 5 - Requires a code reference. ok 6 - USB busses found ok 7 # skip No USB devices installed ok 8 # skip No USB devices installed ok 9 # skip No USB devices installed ok 10 # skip No USB devices installed ok 11 # skip No USB devices installed ok t/06-list_devices.t ............... 1..8 ok 1 - Object successfully created ok 2 - Device::USB->can('list_devices') ok 3 - USB busses found ok 4 # skip No installed USB devices ok 5 # skip No installed USB devices ok 6 # skip No installed USB devices ok 7 # skip No installed USB devices ok 8 # skip No installed USB devices ok t/07-list_devices_if.t ............ 1..11 ok 1 - Object successfully created ok 2 - Device::USB->can('list_devices_if') ok 3 - Requires a predicate. ok 4 - Requires a code reference. ok 5 - USB busses found ok 6 # skip No installed USB devices ok 7 # skip No installed USB devices ok 8 # skip No installed USB devices ok 9 # skip No installed USB devices ok 10 # skip No installed USB devices ok 11 # skip No installed USB devices ok t/08-get_busses.t ................. ok 1 - Object successfully created ok 2 - Device::USB->can('get_busses') ok 3 - USB busses found ok 4 - 'An array of busses returned.' isa 'ARRAY' 1..4 ok t/09-usb-bus.t .................... ok 1 - Object successfully created ok 2 - USB busses found ok 3 - Device::USB::Bus->can(...) 1..3 ok t/10-usb-device-accessors.t ....... 1..2 ok 1 - USB busses found ok 2 - Device::USB::Device->can(...) ok t/11-usb-device-methods.t ......... 1..2 ok 1 - Device::USB::Device->can(...) ok 2 - Device::USB::Device->can(...) ok t/12-constants.t .................. 1..18 ok 1 - Device::USB->can('CLASS_PER_INSTANCE') ok 2 - CLASS_PER_INSTANCE value ok 3 - Device::USB->can('CLASS_AUDIO') ok 4 - CLASS_AUDIO value ok 5 - Device::USB->can('CLASS_COMM') ok 6 - CLASS_COMM value ok 7 - Device::USB->can('CLASS_HID') ok 8 - CLASS_HID value ok 9 - Device::USB->can('CLASS_PRINTER') ok 10 - CLASS_PRINTER value ok 11 - Device::USB->can('CLASS_MASS_STORAGE') ok 12 - CLASS_MASS_STORAGE value ok 13 - Device::USB->can('CLASS_HUB') ok 14 - CLASS_HUB value ok 15 - Device::USB->can('CLASS_DATA') ok 16 - CLASS_DATA value ok 17 - Device::USB->can('CLASS_VENDOR_SPEC') ok 18 - CLASS_VENDOR_SPEC value ok t/13-bus_find_device_if.t ......... 1..8 ok 1 - Object successfully created ok 2 # skip No USB buses found. ok 3 # skip No USB buses found. ok 4 # skip No USB buses found. ok 5 # skip No USB buses found. ok 6 # skip No USB buses found. ok 7 # skip No USB buses found. ok 8 # skip No USB buses found. ok t/14-bus_list_devices_if.t ........ 1..10 ok 1 - Object successfully created ok 2 # skip No installed USB buses ok 3 # skip No installed USB buses ok 4 # skip No installed USB buses ok 5 # skip No installed USB buses ok 6 # skip No installed USB buses ok 7 # skip No installed USB buses ok 8 # skip No installed USB buses ok 9 # skip No installed USB buses ok 10 # skip No installed USB buses ok t/15-usb_dev_configuration.t ...... skipped: No devices found. t/16-usb_dev_interface.t .......... skipped: No devices found. t/17-usb_dev_endpoint.t ........... skipped: No devices found. t/18-usb_device-configurations.t .. 1..1 ok 1 - USB busses found ok xt/boilerplate.t .................. skipped: Author tests not required for installation xt/critic.t ....................... skipped: Author tests not required for installation xt/hasversion.t ................... skipped: Author tests not required for installation xt/pod.t .......................... skipped: Author tests not required for installation xt/podcoverage.t .................. skipped: Author tests not required for installation All tests successful. Files=24, Tests=95, 12 wallclock secs ( 0.19 usr 0.10 sys + 5.47 cusr 1.20 csys = 6.96 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_install make -j20 install DESTDIR=/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' Manifying 1 pod document Manifying 7 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Device/USB/USB.so Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevEndpoint.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Bus.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Device.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevConfig.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/FAQ.pod Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevInterface.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Device.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::FAQ.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevEndpoint.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Bus.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevConfig.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevInterface.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl removed '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl' rmdir --verbose --parents --ignore-fail-on-non-empty /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin' rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p removed '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p' rmdir --verbose --parents --ignore-fail-on-non-empty /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1 rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1' rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man' make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdevice-usb-perl' in '../libdevice-usb-perl_0.38-3_amd64.deb'. dpkg-deb: building package 'libdevice-usb-perl-dbgsym' in '../libdevice-usb-perl-dbgsym_0.38-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-usb-perl_0.38-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libdevice-usb-perl_0.38-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3412050 and its subdirectories I: Current time: Fri Feb 21 22:08:17 -12 2025 I: pbuilder-time-stamp: 1740218897 Sat Feb 22 10:08:17 UTC 2025 I: Signing ./b1/libdevice-usb-perl_0.38-3_amd64.buildinfo as libdevice-usb-perl_0.38-3_amd64.buildinfo.asc Sat Feb 22 10:08:17 UTC 2025 I: Signed ./b1/libdevice-usb-perl_0.38-3_amd64.buildinfo as ./b1/libdevice-usb-perl_0.38-3_amd64.buildinfo.asc Sat Feb 22 10:08:17 UTC 2025 - build #1 for libdevice-usb-perl/trixie/amd64 on ionos1-amd64 done. Starting cleanup. All cleanup done. Sat Feb 22 10:08:17 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-jht3slhG, removing. /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 10:08 b1 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 10:05 b2 -rw-r--r-- 1 jenkins jenkins 2399 Mar 5 2024 libdevice-usb-perl_0.38-3.dsc -rw------- 1 jenkins jenkins 3569 Feb 22 10:05 rbuildlog.4oi5EPs /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1: total 192 -rw-r--r-- 1 jenkins jenkins 36328 Feb 22 10:08 build.log -rw-r--r-- 1 jenkins jenkins 69316 Feb 22 10:08 libdevice-usb-perl-dbgsym_0.38-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 5212 Feb 22 10:08 libdevice-usb-perl_0.38-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2399 Feb 22 10:08 libdevice-usb-perl_0.38-3.dsc -rw-r--r-- 1 jenkins jenkins 5238 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6120 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1667 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 52948 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 1499 Feb 22 10:08 libdevice-usb-perl_0.38-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2: total 0 Sat Feb 22 10:08:18 UTC 2025 I: Deleting $TMPDIR on ionos1-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Feb 21 22:05:52 -12 2025 I: pbuilder-time-stamp: 1740218752 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdevice-usb-perl_0.38-3.dsc] I: copying [./libdevice-usb-perl_0.38.orig.tar.gz] I: copying [./libdevice-usb-perl_0.38-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdevice-usb-perl_0.38-3.dsc: unsupported subcommand dpkg-source: info: extracting libdevice-usb-perl in libdevice-usb-perl-0.38 dpkg-source: info: unpacking libdevice-usb-perl_0.38.orig.tar.gz dpkg-source: info: unpacking libdevice-usb-perl_0.38-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying disable-tests dpkg-source: info: applying fix-typo dpkg-source: info: applying fix-buildsystem dpkg-source: info: applying just-assume-libusb-is-there.diff dpkg-source: info: applying hardening-flags.diff I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3412050/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='f037cad732e6416d94f654a2378bbe73' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3412050' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_HKMO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1 --logfile b1/build.log libdevice-usb-perl_0.38-3.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos1-amd64 6.1.0-31-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.128-1 (2025-02-07) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3412050/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libinline-c-perl, libinline-perl, libusb-dev, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19858 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libinline-c-perl; however: Package libinline-c-perl is not installed. pbuilder-satisfydepends-dummy depends on libinline-perl; however: Package libinline-perl is not installed. pbuilder-satisfydepends-dummy depends on libusb-dev; however: Package libusb-dev is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libinline-c-perl{a} libinline-perl{a} libmagic-mgc{a} libmagic1t64{a} libparse-recdescent-perl{a} libpegex-perl{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libusb-0.1-4{a} libusb-dev{a} libxml2{a} libxxx-perl{a} libyaml-pp-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libinline-files-perl libltdl-dev libmail-sendmail-perl libtie-ixhash-perl lynx wget 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 22.2 MB of archives. After unpacking 85.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-3 [92.1 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-5 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libparse-recdescent-perl all 1.967015+dfsg-4 [147 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libinline-perl all 0.86-2 [83.7 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libyaml-pp-perl all 0.39.0-1 [111 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libxxx-perl all 0.38-1 [11.2 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libpegex-perl all 0.75-2 [77.8 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libinline-c-perl all 0.82-1 [75.9 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.1-2 [1109 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libusb-0.1-4 amd64 2:0.1.12-35+b1 [17.1 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libusb-dev amd64 2:0.1.12-35+b1 [31.7 kB] Fetched 22.2 MB in 4s (5921 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19858 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-3_amd64.deb ... Unpacking bsdextrautils (2.40.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_amd64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libparse-recdescent-perl. Preparing to unpack .../30-libparse-recdescent-perl_1.967015+dfsg-4_all.deb ... Unpacking libparse-recdescent-perl (1.967015+dfsg-4) ... Selecting previously unselected package libinline-perl. Preparing to unpack .../31-libinline-perl_0.86-2_all.deb ... Unpacking libinline-perl (0.86-2) ... Selecting previously unselected package libyaml-pp-perl. Preparing to unpack .../32-libyaml-pp-perl_0.39.0-1_all.deb ... Unpacking libyaml-pp-perl (0.39.0-1) ... Selecting previously unselected package libxxx-perl. Preparing to unpack .../33-libxxx-perl_0.38-1_all.deb ... Unpacking libxxx-perl (0.38-1) ... Selecting previously unselected package libpegex-perl. Preparing to unpack .../34-libpegex-perl_0.75-2_all.deb ... Unpacking libpegex-perl (0.75-2) ... Selecting previously unselected package libinline-c-perl. Preparing to unpack .../35-libinline-c-perl_0.82-1_all.deb ... Unpacking libinline-c-perl (0.82-1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../36-libperl-dev_5.40.1-2_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-2) ... Selecting previously unselected package libusb-0.1-4:amd64. Preparing to unpack .../37-libusb-0.1-4_2%3a0.1.12-35+b1_amd64.deb ... Unpacking libusb-0.1-4:amd64 (2:0.1.12-35+b1) ... Selecting previously unselected package libusb-dev. Preparing to unpack .../38-libusb-dev_2%3a0.1.12-35+b1_amd64.deb ... Unpacking libusb-dev (2:0.1.12-35+b1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-pp-perl (0.39.0-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libperl-dev:amd64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libusb-0.1-4:amd64 (2:0.1.12-35+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up libxxx-perl (0.38-1) ... Setting up dwz (0.15-1+b1) ... Setting up libparse-recdescent-perl (1.967015+dfsg-4) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libpegex-perl (0.75-2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up libinline-perl (0.86-2) ... Setting up libinline-c-perl (0.82-1) ... Setting up libusb-dev (2:0.1.12-35+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libdevice-usb-perl-0.38/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevice-usb-perl_0.38-3_source.changes dpkg-buildpackage: info: source package libdevice-usb-perl dpkg-buildpackage: info: source version 0.38-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Warning: the following files are missing in your kit: USB.pm Please inform the author. Generating a Unix-style Makefile Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json dh_auto_build make -j20 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' cp lib/Device/USB/Device.pm blib/lib/Device/USB/Device.pm cp lib/Device/USB/DevConfig.pm blib/lib/Device/USB/DevConfig.pm cp lib/Device/USB/Bus.pm blib/lib/Device/USB/Bus.pm cp lib/Device/USB/DevInterface.pm blib/lib/Device/USB/DevInterface.pm cp lib/Device/USB.pm blib/lib/Device/USB.pm cp lib/Device/USB/DevEndpoint.pm blib/lib/Device/USB/DevEndpoint.pm cp lib/Device/USB/FAQ.pod blib/lib/Device/USB/FAQ.pod "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Device -e"my %A = (modinlname => 'Device-USB-Device.inl', module => 'Device::USB::Device'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevInterface -e"my %A = (modinlname => 'Device-USB-DevInterface.inl', module => 'Device::USB::DevInterface'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB -e"my %A = (modinlname => 'Device-USB.inl', module => 'Device::USB'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Bus -e"my %A = (modinlname => 'Device-USB-Bus.inl', module => 'Device::USB::Bus'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevConfig -e"my %A = (modinlname => 'Device-USB-DevConfig.inl', module => 'Device::USB::DevConfig'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevEndpoint -e"my %A = (modinlname => 'Device-USB-DevEndpoint.inl', module => 'Device::USB::DevEndpoint'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch validate Stage Starting Build Preprocess Stage get_maps Stage Finished Build Preprocess Stage Starting Build Parse Stage Finished Build Parse Stage Starting Build Glue 1 Stage Finished Build Glue 1 Stage Starting Build Glue 2 Stage Finished Build Glue 2 Stage Starting Build Glue 3 Stage Finished Build Glue 3 Stage Starting Build Compile Stage Starting "perl Makefile.PL" Stage Generating a Unix-style Makefile Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json Finished "perl Makefile.PL" Stage Starting "make" Stage make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Running Mkbootstrap for USB () chmod 644 "USB.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- USB.bs blib/arch/auto/Device/USB/USB.bs 644 "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.40/ExtUtils/typemap" USB.xs > USB.xsc mv USB.xsc USB.c x86_64-linux-gnu-gcc -c -iquote"/build/reproducible-path/libdevice-usb-perl-0.38" -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -O2 -g -DVERSION=\"0.38\" -DXS_VERSION=\"0.38\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" USB.c rm -f blib/arch/auto/Device/USB/USB.so x86_64-linux-gnu-gcc -shared -L/usr/local/lib -fstack-protector-strong -shared -L/usr/local/lib -fstack-protector-strong -Wl,-z,relro -Wl,-z,now USB.o -o blib/arch/auto/Device/USB/USB.so \ -lusb \ chmod 755 blib/arch/auto/Device/USB/USB.so make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Finished "make" Stage Starting "make install" Stage make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- USB.bs blib/arch/auto/Device/USB/USB.bs 644 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/blib/arch/auto/Device/USB/USB.so make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Finished "make install" Stage Starting Cleaning Up Stage Finished Cleaning Up Stage Finished Build Compile Stage cp bin/dump_usb.pl blib/script/dump_usb.pl "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/dump_usb.pl Manifying 1 pod document Manifying 7 pod documents make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_test make -j20 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t # Testing Device::USB 0.38, Perl 5.040001, /usr/bin/perl t/00-load.t ....................... 1..1 ok 1 - use Device::USB; ok t/01-create-usb.t ................. 1..2 ok 1 - Object successfully created ok 2 - An object of class 'Device::USB' isa 'Device::USB' ok t/02-find_busses_devices.t ........ 1..2 ok 1 - Object successfully created ok 2 - Device::USB->can(...) ok t/03-list_busses.t ................ ok 1 - Object successfully created ok 2 - Device::USB->can('list_busses') ok 3 - USB busses found ok 4 - 'An array of busses returned.' isa 'ARRAY' 1..4 ok t/04-find_device.t ................ 1..8 ok 1 - Object successfully created ok 2 - Device::USB->can('find_device') ok 3 - No device found ok 4 - USB busses found ok 5 # skip No USB devices installed ok 6 # skip No USB devices installed ok 7 # skip No USB devices installed ok 8 # skip No USB devices installed ok t/05-find_device_if.t ............. 1..11 ok 1 - Object successfully created ok 2 - Device::USB->can('find_device_if') ok 3 - No device found ok 4 - Requires a predicate. ok 5 - Requires a code reference. ok 6 - USB busses found ok 7 # skip No USB devices installed ok 8 # skip No USB devices installed ok 9 # skip No USB devices installed ok 10 # skip No USB devices installed ok 11 # skip No USB devices installed ok t/06-list_devices.t ............... 1..8 ok 1 - Object successfully created ok 2 - Device::USB->can('list_devices') ok 3 - USB busses found ok 4 # skip No installed USB devices ok 5 # skip No installed USB devices ok 6 # skip No installed USB devices ok 7 # skip No installed USB devices ok 8 # skip No installed USB devices ok t/07-list_devices_if.t ............ 1..11 ok 1 - Object successfully created ok 2 - Device::USB->can('list_devices_if') ok 3 - Requires a predicate. ok 4 - Requires a code reference. ok 5 - USB busses found ok 6 # skip No installed USB devices ok 7 # skip No installed USB devices ok 8 # skip No installed USB devices ok 9 # skip No installed USB devices ok 10 # skip No installed USB devices ok 11 # skip No installed USB devices ok t/08-get_busses.t ................. ok 1 - Object successfully created ok 2 - Device::USB->can('get_busses') ok 3 - USB busses found ok 4 - 'An array of busses returned.' isa 'ARRAY' 1..4 ok t/09-usb-bus.t .................... ok 1 - Object successfully created ok 2 - USB busses found ok 3 - Device::USB::Bus->can(...) 1..3 ok t/10-usb-device-accessors.t ....... 1..2 ok 1 - USB busses found ok 2 - Device::USB::Device->can(...) ok t/11-usb-device-methods.t ......... 1..2 ok 1 - Device::USB::Device->can(...) ok 2 - Device::USB::Device->can(...) ok t/12-constants.t .................. 1..18 ok 1 - Device::USB->can('CLASS_PER_INSTANCE') ok 2 - CLASS_PER_INSTANCE value ok 3 - Device::USB->can('CLASS_AUDIO') ok 4 - CLASS_AUDIO value ok 5 - Device::USB->can('CLASS_COMM') ok 6 - CLASS_COMM value ok 7 - Device::USB->can('CLASS_HID') ok 8 - CLASS_HID value ok 9 - Device::USB->can('CLASS_PRINTER') ok 10 - CLASS_PRINTER value ok 11 - Device::USB->can('CLASS_MASS_STORAGE') ok 12 - CLASS_MASS_STORAGE value ok 13 - Device::USB->can('CLASS_HUB') ok 14 - CLASS_HUB value ok 15 - Device::USB->can('CLASS_DATA') ok 16 - CLASS_DATA value ok 17 - Device::USB->can('CLASS_VENDOR_SPEC') ok 18 - CLASS_VENDOR_SPEC value ok t/13-bus_find_device_if.t ......... 1..8 ok 1 - Object successfully created ok 2 # skip No USB buses found. ok 3 # skip No USB buses found. ok 4 # skip No USB buses found. ok 5 # skip No USB buses found. ok 6 # skip No USB buses found. ok 7 # skip No USB buses found. ok 8 # skip No USB buses found. ok t/14-bus_list_devices_if.t ........ 1..10 ok 1 - Object successfully created ok 2 # skip No installed USB buses ok 3 # skip No installed USB buses ok 4 # skip No installed USB buses ok 5 # skip No installed USB buses ok 6 # skip No installed USB buses ok 7 # skip No installed USB buses ok 8 # skip No installed USB buses ok 9 # skip No installed USB buses ok 10 # skip No installed USB buses ok t/15-usb_dev_configuration.t ...... skipped: No devices found. t/16-usb_dev_interface.t .......... skipped: No devices found. t/17-usb_dev_endpoint.t ........... skipped: No devices found. t/18-usb_device-configurations.t .. 1..1 ok 1 - USB busses found ok xt/boilerplate.t .................. skipped: Author tests not required for installation xt/critic.t ....................... skipped: Author tests not required for installation xt/hasversion.t ................... skipped: Author tests not required for installation xt/pod.t .......................... skipped: Author tests not required for installation xt/podcoverage.t .................. skipped: Author tests not required for installation All tests successful. Files=24, Tests=95, 12 wallclock secs ( 0.19 usr 0.10 sys + 5.47 cusr 1.20 csys = 6.96 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_install make -j20 install DESTDIR=/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' Manifying 1 pod document Manifying 7 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Device/USB/USB.so Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevEndpoint.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Bus.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Device.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevConfig.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/FAQ.pod Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevInterface.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Device.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::FAQ.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevEndpoint.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Bus.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevConfig.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevInterface.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl removed '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl' rmdir --verbose --parents --ignore-fail-on-non-empty /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin' rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p removed '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p' rmdir --verbose --parents --ignore-fail-on-non-empty /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1 rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1' rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man' make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdevice-usb-perl' in '../libdevice-usb-perl_0.38-3_amd64.deb'. dpkg-deb: building package 'libdevice-usb-perl-dbgsym' in '../libdevice-usb-perl-dbgsym_0.38-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-usb-perl_0.38-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libdevice-usb-perl_0.38-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3412050 and its subdirectories I: Current time: Fri Feb 21 22:08:17 -12 2025 I: pbuilder-time-stamp: 1740218897 Sat Feb 22 10:08:18 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos5-amd64.debian.net. Sat Feb 22 10:08:18 UTC 2025 I: Preparing to do remote build '2' on ionos5-amd64.debian.net. Sat Feb 22 10:08:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos5-amd64.debian.net is marked as down. Sat Feb 22 10:08:18 UTC 2025 - checking via ssh if ionos5-amd64.debian.net is up. removed '/tmp/read-only-fs-test-lWBqO4' ==================================================================================== Fri Mar 27 16:31:19 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos5-amd64, called using "2 libdevice-usb-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW 0.38-3" as arguments. Fri Mar 27 16:31:19 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-gaGZLUuq" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Mar 27 16:31:19 UTC 2026 I: Downloading source for trixie/libdevice-usb-perl=0.38-3 Reading package lists... NOTICE: 'libdevice-usb-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 33.6 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (dsc) [2399 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (tar) [26.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (diff) [5212 B] Fetched 33.6 kB in 0s (1905 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdevice-usb-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-usb-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 33.6 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (dsc) [2399 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (tar) [26.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-usb-perl 0.38-3 (diff) [5212 B] Fetched 33.6 kB in 0s (1905 kB/s) Download complete and in download only mode ============================================================================= Re-Building libdevice-usb-perl in trixie on amd64 on ionos5-amd64 now. Date: Fri Mar 27 16:31:19 UTC 2026 Date UTC: Fri Mar 27 16:31:19 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_tj2G + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libdevice-usb-perl = debian-installer -o libdevice-usb-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libdevice-usb-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_tj2G --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2 --logfile b2/build.log libdevice-usb-perl_0.38-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Sat Mar 28 06:31:19 +14 2026 I: pbuilder-time-stamp: 1774629079 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdevice-usb-perl_0.38-3.dsc] I: copying [./libdevice-usb-perl_0.38.orig.tar.gz] I: copying [./libdevice-usb-perl_0.38-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdevice-usb-perl_0.38-3.dsc: unsupported subcommand dpkg-source: info: extracting libdevice-usb-perl in libdevice-usb-perl-0.38 dpkg-source: info: unpacking libdevice-usb-perl_0.38.orig.tar.gz dpkg-source: info: unpacking libdevice-usb-perl_0.38-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying disable-tests dpkg-source: info: applying fix-typo dpkg-source: info: applying fix-buildsystem dpkg-source: info: applying just-assume-libusb-is-there.diff dpkg-source: info: applying hardening-flags.diff I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D01_modify_environment starting debug: Running on ionos5-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Mar 27 16:31 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=37f4e3936e2b412fbba06f7c6e515ee0 LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1025122 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_tj2G --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2 --logfile b2/build.log libdevice-usb-perl_0.38-3.dsc' SUDO_GID=110 SUDO_UID=105 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://213.165.73.152:3128 I: uname -a Linux i-capture-the-hostname 6.12.9+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1~bpo12+1 (2025-01-19) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libinline-c-perl, libinline-perl, libusb-dev, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19858 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libinline-c-perl; however: Package libinline-c-perl is not installed. pbuilder-satisfydepends-dummy depends on libinline-perl; however: Package libinline-perl is not installed. pbuilder-satisfydepends-dummy depends on libusb-dev; however: Package libusb-dev is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libinline-c-perl{a} libinline-perl{a} libmagic-mgc{a} libmagic1t64{a} libparse-recdescent-perl{a} libpegex-perl{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libusb-0.1-4{a} libusb-dev{a} libxml2{a} libxxx-perl{a} libyaml-pp-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libinline-files-perl libltdl-dev libmail-sendmail-perl libtie-ixhash-perl lynx wget 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 22.2 MB of archives. After unpacking 85.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-3 [92.1 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-5 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libparse-recdescent-perl all 1.967015+dfsg-4 [147 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libinline-perl all 0.86-2 [83.7 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libyaml-pp-perl all 0.39.0-1 [111 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libxxx-perl all 0.38-1 [11.2 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libpegex-perl all 0.75-2 [77.8 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libinline-c-perl all 0.82-1 [75.9 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.1-2 [1109 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libusb-0.1-4 amd64 2:0.1.12-35+b1 [17.1 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libusb-dev amd64 2:0.1.12-35+b1 [31.7 kB] Fetched 22.2 MB in 0s (96.2 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19858 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-3_amd64.deb ... Unpacking bsdextrautils (2.40.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_amd64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libparse-recdescent-perl. Preparing to unpack .../30-libparse-recdescent-perl_1.967015+dfsg-4_all.deb ... Unpacking libparse-recdescent-perl (1.967015+dfsg-4) ... Selecting previously unselected package libinline-perl. Preparing to unpack .../31-libinline-perl_0.86-2_all.deb ... Unpacking libinline-perl (0.86-2) ... Selecting previously unselected package libyaml-pp-perl. Preparing to unpack .../32-libyaml-pp-perl_0.39.0-1_all.deb ... Unpacking libyaml-pp-perl (0.39.0-1) ... Selecting previously unselected package libxxx-perl. Preparing to unpack .../33-libxxx-perl_0.38-1_all.deb ... Unpacking libxxx-perl (0.38-1) ... Selecting previously unselected package libpegex-perl. Preparing to unpack .../34-libpegex-perl_0.75-2_all.deb ... Unpacking libpegex-perl (0.75-2) ... Selecting previously unselected package libinline-c-perl. Preparing to unpack .../35-libinline-c-perl_0.82-1_all.deb ... Unpacking libinline-c-perl (0.82-1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../36-libperl-dev_5.40.1-2_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-2) ... Selecting previously unselected package libusb-0.1-4:amd64. Preparing to unpack .../37-libusb-0.1-4_2%3a0.1.12-35+b1_amd64.deb ... Unpacking libusb-0.1-4:amd64 (2:0.1.12-35+b1) ... Selecting previously unselected package libusb-dev. Preparing to unpack .../38-libusb-dev_2%3a0.1.12-35+b1_amd64.deb ... Unpacking libusb-dev (2:0.1.12-35+b1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-pp-perl (0.39.0-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libperl-dev:amd64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libusb-0.1-4:amd64 (2:0.1.12-35+b1) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up libxxx-perl (0.38-1) ... Setting up dwz (0.15-1+b1) ... Setting up libparse-recdescent-perl (1.967015+dfsg-4) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libpegex-perl (0.75-2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up libinline-perl (0.86-2) ... Setting up libinline-c-perl (0.82-1) ... Setting up libusb-dev (2:0.1.12-35+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libdevice-usb-perl-0.38/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdevice-usb-perl_0.38-3_source.changes dpkg-buildpackage: info: source package libdevice-usb-perl dpkg-buildpackage: info: source version 0.38-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Warning: the following files are missing in your kit: USB.pm Please inform the author. Generating a Unix-style Makefile Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' cp lib/Device/USB/FAQ.pod blib/lib/Device/USB/FAQ.pod cp lib/Device/USB/DevConfig.pm blib/lib/Device/USB/DevConfig.pm cp lib/Device/USB/DevEndpoint.pm blib/lib/Device/USB/DevEndpoint.pm cp lib/Device/USB.pm blib/lib/Device/USB.pm cp lib/Device/USB/Device.pm blib/lib/Device/USB/Device.pm cp lib/Device/USB/DevInterface.pm blib/lib/Device/USB/DevInterface.pm cp lib/Device/USB/Bus.pm blib/lib/Device/USB/Bus.pm "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB -e"my %A = (modinlname => 'Device-USB.inl', module => 'Device::USB'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Bus -e"my %A = (modinlname => 'Device-USB-Bus.inl', module => 'Device::USB::Bus'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Device -e"my %A = (modinlname => 'Device-USB-Device.inl', module => 'Device::USB::Device'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevConfig -e"my %A = (modinlname => 'Device-USB-DevConfig.inl', module => 'Device::USB::DevConfig'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevEndpoint -e"my %A = (modinlname => 'Device-USB-DevEndpoint.inl', module => 'Device::USB::DevEndpoint'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevInterface -e"my %A = (modinlname => 'Device-USB-DevInterface.inl', module => 'Device::USB::DevInterface'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch validate Stage Starting Build Preprocess Stage get_maps Stage Finished Build Preprocess Stage Starting Build Parse Stage Finished Build Parse Stage Starting Build Glue 1 Stage Finished Build Glue 1 Stage Starting Build Glue 2 Stage Finished Build Glue 2 Stage Starting Build Glue 3 Stage Finished Build Glue 3 Stage Starting Build Compile Stage Starting "perl Makefile.PL" Stage Generating a Unix-style Makefile Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json Finished "perl Makefile.PL" Stage Starting "make" Stage make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Running Mkbootstrap for USB () chmod 644 "USB.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- USB.bs blib/arch/auto/Device/USB/USB.bs 644 "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.40/ExtUtils/typemap" USB.xs > USB.xsc mv USB.xsc USB.c x86_64-linux-gnu-gcc -c -iquote"/build/reproducible-path/libdevice-usb-perl-0.38" -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-usb-perl-0.38=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -O2 -g -DVERSION=\"0.38\" -DXS_VERSION=\"0.38\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" USB.c rm -f blib/arch/auto/Device/USB/USB.so x86_64-linux-gnu-gcc -shared -L/usr/local/lib -fstack-protector-strong -shared -L/usr/local/lib -fstack-protector-strong -Wl,-z,relro -Wl,-z,now USB.o -o blib/arch/auto/Device/USB/USB.so \ -lusb \ chmod 755 blib/arch/auto/Device/USB/USB.so make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Finished "make" Stage Starting "make install" Stage make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- USB.bs blib/arch/auto/Device/USB/USB.bs 644 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/blib/arch/auto/Device/USB/USB.so make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38/_Inline/build/Device/USB' Finished "make install" Stage Starting Cleaning Up Stage Finished Cleaning Up Stage Finished Build Compile Stage cp bin/dump_usb.pl blib/script/dump_usb.pl "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/dump_usb.pl Manifying 1 pod document Manifying 7 pod documents make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t # Testing Device::USB 0.38, Perl 5.040001, /usr/bin/perl t/00-load.t ....................... 1..1 ok 1 - use Device::USB; ok t/01-create-usb.t ................. 1..2 ok 1 - Object successfully created ok 2 - An object of class 'Device::USB' isa 'Device::USB' ok t/02-find_busses_devices.t ........ 1..2 ok 1 - Object successfully created ok 2 - Device::USB->can(...) ok t/03-list_busses.t ................ ok 1 - Object successfully created ok 2 - Device::USB->can('list_busses') ok 3 - USB busses found ok 4 - 'An array of busses returned.' isa 'ARRAY' 1..4 ok t/04-find_device.t ................ 1..8 ok 1 - Object successfully created ok 2 - Device::USB->can('find_device') ok 3 - No device found ok 4 - USB busses found ok 5 # skip No USB devices installed ok 6 # skip No USB devices installed ok 7 # skip No USB devices installed ok 8 # skip No USB devices installed ok t/05-find_device_if.t ............. 1..11 ok 1 - Object successfully created ok 2 - Device::USB->can('find_device_if') ok 3 - No device found ok 4 - Requires a predicate. ok 5 - Requires a code reference. ok 6 - USB busses found ok 7 # skip No USB devices installed ok 8 # skip No USB devices installed ok 9 # skip No USB devices installed ok 10 # skip No USB devices installed ok 11 # skip No USB devices installed ok t/06-list_devices.t ............... 1..8 ok 1 - Object successfully created ok 2 - Device::USB->can('list_devices') ok 3 - USB busses found ok 4 # skip No installed USB devices ok 5 # skip No installed USB devices ok 6 # skip No installed USB devices ok 7 # skip No installed USB devices ok 8 # skip No installed USB devices ok t/07-list_devices_if.t ............ 1..11 ok 1 - Object successfully created ok 2 - Device::USB->can('list_devices_if') ok 3 - Requires a predicate. ok 4 - Requires a code reference. ok 5 - USB busses found ok 6 # skip No installed USB devices ok 7 # skip No installed USB devices ok 8 # skip No installed USB devices ok 9 # skip No installed USB devices ok 10 # skip No installed USB devices ok 11 # skip No installed USB devices ok t/08-get_busses.t ................. ok 1 - Object successfully created ok 2 - Device::USB->can('get_busses') ok 3 - USB busses found ok 4 - 'An array of busses returned.' isa 'ARRAY' 1..4 ok t/09-usb-bus.t .................... ok 1 - Object successfully created ok 2 - USB busses found ok 3 - Device::USB::Bus->can(...) 1..3 ok t/10-usb-device-accessors.t ....... 1..2 ok 1 - USB busses found ok 2 - Device::USB::Device->can(...) ok t/11-usb-device-methods.t ......... 1..2 ok 1 - Device::USB::Device->can(...) ok 2 - Device::USB::Device->can(...) ok t/12-constants.t .................. 1..18 ok 1 - Device::USB->can('CLASS_PER_INSTANCE') ok 2 - CLASS_PER_INSTANCE value ok 3 - Device::USB->can('CLASS_AUDIO') ok 4 - CLASS_AUDIO value ok 5 - Device::USB->can('CLASS_COMM') ok 6 - CLASS_COMM value ok 7 - Device::USB->can('CLASS_HID') ok 8 - CLASS_HID value ok 9 - Device::USB->can('CLASS_PRINTER') ok 10 - CLASS_PRINTER value ok 11 - Device::USB->can('CLASS_MASS_STORAGE') ok 12 - CLASS_MASS_STORAGE value ok 13 - Device::USB->can('CLASS_HUB') ok 14 - CLASS_HUB value ok 15 - Device::USB->can('CLASS_DATA') ok 16 - CLASS_DATA value ok 17 - Device::USB->can('CLASS_VENDOR_SPEC') ok 18 - CLASS_VENDOR_SPEC value ok t/13-bus_find_device_if.t ......... 1..8 ok 1 - Object successfully created ok 2 # skip No USB buses found. ok 3 # skip No USB buses found. ok 4 # skip No USB buses found. ok 5 # skip No USB buses found. ok 6 # skip No USB buses found. ok 7 # skip No USB buses found. ok 8 # skip No USB buses found. ok t/14-bus_list_devices_if.t ........ 1..10 ok 1 - Object successfully created ok 2 # skip No installed USB buses ok 3 # skip No installed USB buses ok 4 # skip No installed USB buses ok 5 # skip No installed USB buses ok 6 # skip No installed USB buses ok 7 # skip No installed USB buses ok 8 # skip No installed USB buses ok 9 # skip No installed USB buses ok 10 # skip No installed USB buses ok t/15-usb_dev_configuration.t ...... skipped: No devices found. t/16-usb_dev_interface.t .......... skipped: No devices found. t/17-usb_dev_endpoint.t ........... skipped: No devices found. t/18-usb_device-configurations.t .. 1..1 ok 1 - USB busses found ok xt/boilerplate.t .................. skipped: Author tests not required for installation xt/critic.t ....................... skipped: Author tests not required for installation xt/hasversion.t ................... skipped: Author tests not required for installation xt/pod.t .......................... skipped: Author tests not required for installation xt/podcoverage.t .................. skipped: Author tests not required for installation All tests successful. Files=24, Tests=95, 2 wallclock secs ( 0.07 usr 0.04 sys + 1.87 cusr 0.31 csys = 2.29 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_install make -j42 install DESTDIR=/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' Manifying 1 pod document Manifying 7 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Device/USB/USB.so Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevInterface.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Bus.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevEndpoint.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevConfig.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/FAQ.pod Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Device.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevConfig.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevEndpoint.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Device.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevInterface.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Bus.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::FAQ.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl removed '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl' rmdir --verbose --parents --ignore-fail-on-non-empty /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin' rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p removed '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p' rmdir --verbose --parents --ignore-fail-on-non-empty /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1 rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1' rmdir: removing directory, '/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man' make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdevice-usb-perl-dbgsym' in '../libdevice-usb-perl-dbgsym_0.38-3_amd64.deb'. dpkg-deb: building package 'libdevice-usb-perl' in '../libdevice-usb-perl_0.38-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-usb-perl_0.38-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libdevice-usb-perl_0.38-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1025122 and its subdirectories I: Current time: Sat Mar 28 06:32:08 +14 2026 I: pbuilder-time-stamp: 1774629128 + false + set +x Fri Mar 27 16:32:08 UTC 2026 I: Signing ./b2/libdevice-usb-perl_0.38-3_amd64.buildinfo as libdevice-usb-perl_0.38-3_amd64.buildinfo.asc Fri Mar 27 16:32:08 UTC 2026 I: Signed ./b2/libdevice-usb-perl_0.38-3_amd64.buildinfo as ./b2/libdevice-usb-perl_0.38-3_amd64.buildinfo.asc Fri Mar 27 16:32:08 UTC 2026 - build #2 for libdevice-usb-perl/trixie/amd64 on ionos5-amd64 done. Starting cleanup. All cleanup done. Fri Mar 27 16:32:08 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-gaGZLUuq, removing. /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW: total 52 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 10:08 b1 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 10:09 b2 -rw-r--r-- 1 jenkins jenkins 2399 Mar 5 2024 libdevice-usb-perl_0.38-3.dsc -rw------- 1 jenkins jenkins 40183 Feb 22 10:08 rbuildlog.4oi5EPs /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1: total 200 -rw-r--r-- 1 jenkins jenkins 36328 Feb 22 10:08 build.log -rw-r--r-- 1 jenkins jenkins 69316 Feb 22 10:08 libdevice-usb-perl-dbgsym_0.38-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 5212 Feb 22 10:08 libdevice-usb-perl_0.38-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2399 Feb 22 10:08 libdevice-usb-perl_0.38-3.dsc -rw-r--r-- 1 jenkins jenkins 5238 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6120 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1667 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 52948 Feb 22 10:08 libdevice-usb-perl_0.38-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 1499 Feb 22 10:08 libdevice-usb-perl_0.38-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2: total 196 -rw-r--r-- 1 jenkins jenkins 38269 Feb 22 10:09 build.log -rw-r--r-- 1 jenkins jenkins 69316 Feb 22 10:09 libdevice-usb-perl-dbgsym_0.38-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 5212 Feb 22 10:09 libdevice-usb-perl_0.38-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2399 Feb 22 10:09 libdevice-usb-perl_0.38-3.dsc -rw-r--r-- 1 jenkins jenkins 5247 Feb 22 10:09 libdevice-usb-perl_0.38-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6129 Feb 22 10:09 libdevice-usb-perl_0.38-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1667 Feb 22 10:09 libdevice-usb-perl_0.38-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 52948 Feb 22 10:09 libdevice-usb-perl_0.38-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 1499 Feb 22 10:09 libdevice-usb-perl_0.38-3_source.changes Sat Feb 22 10:09:08 UTC 2025 I: Deleting $TMPDIR on ionos5-amd64.debian.net. Sat Feb 22 10:09:09 UTC 2025 I: libdevice-usb-perl_0.38-3_amd64.changes: Format: 1.8 Date: Tue, 05 Mar 2024 14:49:38 +0100 Source: libdevice-usb-perl Binary: libdevice-usb-perl libdevice-usb-perl-dbgsym Architecture: amd64 Version: 0.38-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libdevice-usb-perl - Perl module to access USB devices using libusb Closes: 1046724 Changes: libdevice-usb-perl (0.38-3) unstable; urgency=medium . * Team upload. * Remove generated file via debian/clean. (Closes: #1046724) * Declare compliance with Debian Policy 4.6.2. * Refresh lintian override (formatting). * Don't install extraneous manpage. * Set Rules-Requires-Root: no. Checksums-Sha1: d57f4a515007cc87d7eb9a6f789928c5f9a6327b 69316 libdevice-usb-perl-dbgsym_0.38-3_amd64.deb 0a9fe1b7baf8cf1abac1ab5bbb2d96450395ac55 5238 libdevice-usb-perl_0.38-3_amd64.buildinfo 2021eee3b443e7d3186ad4528f64a6761315a35a 52948 libdevice-usb-perl_0.38-3_amd64.deb Checksums-Sha256: ab87d6749499f4f4f011f2fcc47192f37a6a23bb268a92acbfbbdca98800db09 69316 libdevice-usb-perl-dbgsym_0.38-3_amd64.deb 20cc23cf06e8b5e400e19489da8e7168a163d541a3bff61a08c69d4f265e4ee1 5238 libdevice-usb-perl_0.38-3_amd64.buildinfo 78ff7f49d1e657e40e4c812ddc8ed064762cb73c12a3ec3c50622b9d03ff7ef7 52948 libdevice-usb-perl_0.38-3_amd64.deb Files: 10cb7293b90f50919db3ca5f4706a3d0 69316 debug optional libdevice-usb-perl-dbgsym_0.38-3_amd64.deb 7db4484231591bee3a608b68b0989281 5238 perl optional libdevice-usb-perl_0.38-3_amd64.buildinfo db67d0e0c2e89a13a733a31f2b6e0119 52948 perl optional libdevice-usb-perl_0.38-3_amd64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libdevice-usb-perl_0.38-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libdevice-usb-perl_0.38-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libdevice-usb-perl_0.38-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libdevice-usb-perl_0.38-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/amd64/libdevice-usb-perl_0.38-3_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libdevice-usb-perl_0.38-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-02-22 10:08:17.952385270 +0000 +++ b2/build.log 2025-02-22 10:09:08.918091436 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Fri Feb 21 22:05:52 -12 2025 -I: pbuilder-time-stamp: 1740218752 +I: Current time: Sat Mar 28 06:31:19 +14 2026 +I: pbuilder-time-stamp: 1774629079 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -28,52 +28,84 @@ dpkg-source: info: applying hardening-flags.diff I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3412050/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D01_modify_environment starting +debug: Running on ionos5-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Mar 27 16:31 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='amd64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='f037cad732e6416d94f654a2378bbe73' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3412050' - PS1='# ' - PS2='> ' + INVOCATION_ID=37f4e3936e2b412fbba06f7c6e515ee0 + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1025122 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_HKMO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1 --logfile b1/build.log libdevice-usb-perl_0.38-3.dsc' - SUDO_GID='110' - SUDO_UID='105' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://46.16.76.132:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/pbuilderrc_tj2G --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2 --logfile b2/build.log libdevice-usb-perl_0.38-3.dsc' + SUDO_GID=110 + SUDO_UID=105 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://213.165.73.152:3128 I: uname -a - Linux ionos1-amd64 6.1.0-31-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.128-1 (2025-02-07) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.12.9+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1~bpo12+1 (2025-01-19) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3412050/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -157,7 +189,7 @@ Get: 37 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.1-2 [1109 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libusb-0.1-4 amd64 2:0.1.12-35+b1 [17.1 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libusb-dev amd64 2:0.1.12-35+b1 [31.7 kB] -Fetched 22.2 MB in 4s (5921 kB/s) +Fetched 22.2 MB in 0s (96.2 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19858 files and directories currently installed.) @@ -328,7 +360,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libdevice-usb-perl-0.38/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevice-usb-perl_0.38-3_source.changes +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libdevice-usb-perl-0.38/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdevice-usb-perl_0.38-3_source.changes dpkg-buildpackage: info: source package libdevice-usb-perl dpkg-buildpackage: info: source version 0.38-3 dpkg-buildpackage: info: source distribution unstable @@ -352,21 +388,21 @@ Writing Makefile for Device::USB Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j20 + make -j42 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' -cp lib/Device/USB/Device.pm blib/lib/Device/USB/Device.pm +cp lib/Device/USB/FAQ.pod blib/lib/Device/USB/FAQ.pod cp lib/Device/USB/DevConfig.pm blib/lib/Device/USB/DevConfig.pm -cp lib/Device/USB/Bus.pm blib/lib/Device/USB/Bus.pm -cp lib/Device/USB/DevInterface.pm blib/lib/Device/USB/DevInterface.pm -cp lib/Device/USB.pm blib/lib/Device/USB.pm cp lib/Device/USB/DevEndpoint.pm blib/lib/Device/USB/DevEndpoint.pm -cp lib/Device/USB/FAQ.pod blib/lib/Device/USB/FAQ.pod -"/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Device -e"my %A = (modinlname => 'Device-USB-Device.inl', module => 'Device::USB::Device'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch -"/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevInterface -e"my %A = (modinlname => 'Device-USB-DevInterface.inl', module => 'Device::USB::DevInterface'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch +cp lib/Device/USB.pm blib/lib/Device/USB.pm +cp lib/Device/USB/Device.pm blib/lib/Device/USB/Device.pm +cp lib/Device/USB/DevInterface.pm blib/lib/Device/USB/DevInterface.pm +cp lib/Device/USB/Bus.pm blib/lib/Device/USB/Bus.pm "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB -e"my %A = (modinlname => 'Device-USB.inl', module => 'Device::USB'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Bus -e"my %A = (modinlname => 'Device-USB-Bus.inl', module => 'Device::USB::Bus'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch +"/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::Device -e"my %A = (modinlname => 'Device-USB-Device.inl', module => 'Device::USB::Device'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevConfig -e"my %A = (modinlname => 'Device-USB-DevConfig.inl', module => 'Device::USB::DevConfig'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch "/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevEndpoint -e"my %A = (modinlname => 'Device-USB-DevEndpoint.inl', module => 'Device::USB::DevEndpoint'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch +"/usr/bin/perl" -Mblib -MInline=NOISY,_INSTALL_ -MDevice::USB::DevInterface -e"my %A = (modinlname => 'Device-USB-DevInterface.inl', module => 'Device::USB::DevInterface'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 0.38 blib/arch validate Stage Starting Build Preprocess Stage get_maps Stage @@ -426,7 +462,7 @@ Manifying 7 pod documents make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_test - make -j20 test TEST_VERBOSE=1 + make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t # Testing Device::USB 0.38, Perl 5.040001, /usr/bin/perl @@ -582,7 +618,7 @@ xt/pod.t .......................... skipped: Author tests not required for installation xt/podcoverage.t .................. skipped: Author tests not required for installation All tests successful. -Files=24, Tests=95, 12 wallclock secs ( 0.19 usr 0.10 sys + 5.47 cusr 1.20 csys = 6.96 CPU) +Files=24, Tests=95, 2 wallclock secs ( 0.07 usr 0.04 sys + 1.87 cusr 0.31 csys = 2.29 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' create-stamp debian/debhelper-build-stamp @@ -590,27 +626,27 @@ debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' dh_auto_install - make -j20 install DESTDIR=/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j42 install DESTDIR=/build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/reproducible-path/libdevice-usb-perl-0.38' Manifying 1 pod document Manifying 7 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Device/USB/USB.so Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB.pm -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevEndpoint.pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevInterface.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Bus.pm -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Device.pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevEndpoint.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevConfig.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/FAQ.pod -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/DevInterface.pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Device/USB/Device.pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man1/dump_usb.pl.1p -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Device.3pm -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::FAQ.3pm -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevEndpoint.3pm -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Bus.3pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevConfig.3pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevEndpoint.3pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Device.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::DevInterface.3pm -Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB.3pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::Bus.3pm +Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/share/man/man3/Device::USB::FAQ.3pm Installing /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl make[2]: Leaving directory '/build/reproducible-path/libdevice-usb-perl-0.38' rm -f -v /build/reproducible-path/libdevice-usb-perl-0.38/debian/libdevice-usb-perl/usr/bin/dump_usb.pl @@ -647,8 +683,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libdevice-usb-perl' in '../libdevice-usb-perl_0.38-3_amd64.deb'. dpkg-deb: building package 'libdevice-usb-perl-dbgsym' in '../libdevice-usb-perl-dbgsym_0.38-3_amd64.deb'. +dpkg-deb: building package 'libdevice-usb-perl' in '../libdevice-usb-perl_0.38-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-usb-perl_0.38-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libdevice-usb-perl_0.38-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -656,12 +692,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1025122/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3412050 and its subdirectories -I: Current time: Fri Feb 21 22:08:17 -12 2025 -I: pbuilder-time-stamp: 1740218897 +I: removing directory /srv/workspace/pbuilder/1025122 and its subdirectories +I: Current time: Sat Mar 28 06:32:08 +14 2026 +I: pbuilder-time-stamp: 1774629128 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libdevice-usb-perl_0.38-3.diff: 75.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libdevice-usb-perl_0.38-3.diff.gz b2/build.log: 77.8% -- replaced with stdout Compressing the 1st log... b1/build.log: 78.4% -- replaced with stdout Sat Feb 22 10:09:10 UTC 2025 I: diffoscope 289 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libdevice-usb-perl_trixie_amd64_1740218950 + touch /var/log/reproducible-builds/diffoscope_stamp_libdevice-usb-perl_trixie_amd64_1740218950 + RESULT=0 + systemd-run '--description=diffoscope on libdevice-usb-perl/0.38-3 in trixie/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_1-30992 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW --run-session -c jenkins-reproducible-trixie-diffoscope-44b58c4f-ca3a-44cd-aa92-84ad7a3db332 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/dbd-tmp-h8RpeUL ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/libdevice-usb-perl_0.38-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/libdevice-usb-perl_0.38-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/libdevice-usb-perl_0.38-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1/libdevice-usb-perl_0.38-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2/libdevice-usb-perl_0.38-3_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_1-30992.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/libdevice-usb-perl_0.38-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/libdevice-usb-perl_0.38-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/libdevice-usb-perl_0.38-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b1/libdevice-usb-perl_0.38-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.gNbxX9zW/b2/libdevice-usb-perl_0.38-3_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 223ms CPU time consumed: 223ms _ _ _ _ _ _ | (_) |__ __| | _____ _(_) ___ ___ _ _ ___| |__ _ __ ___ | | | '_ \ / _` |/ _ \ \ / / |/ __/ _ \_____| | | / __| '_ \ _____| '_ \ / _ \ | | | |_) | (_| | __/\ V /| | (_| __/_____| |_| \__ \ |_) |_____| |_) | __/ |_|_|_.__/ \__,_|\___| \_/ |_|\___\___| \__,_|___/_.__/ | .__/ \___| |_| _ _ __| | | '__| | | | | | |_| |_| Sat Feb 22 10:09:10 UTC 2025 I: diffoscope 289 found no differences in the changes files, and a .buildinfo file also exists. Sat Feb 22 10:09:10 UTC 2025 I: libdevice-usb-perl from trixie built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-02-22 10:09:11] INFO: Starting at 2025-02-22 10:09:11.429489 [2025-02-22 10:09:11] INFO: Generating the pages of 1 package(s) [2025-02-22 10:09:11] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/amd64/libdevice-usb-perl didn't produce a buildlog, even though it has been built. [2025-02-22 10:09:11] INFO: Finished at 2025-02-22 10:09:11.856869, took: 0:00:00.427386 Sat Feb 22 10:09:11 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/amd64/libdevice-usb-perl.html Sat Feb 22 10:09:11 UTC 2025 I: Submitting .buildinfo files to external archives: Sat Feb 22 10:09:11 UTC 2025 I: Submitting 8.0K b1/libdevice-usb-perl_0.38-3_amd64.buildinfo.asc https://buildinfo.debian.net/0a9fe1b7baf8cf1abac1ab5bbb2d96450395ac55/libdevice-usb-perl_0.38-3_amd64 Sat Feb 22 10:09:12 UTC 2025 I: Submitting 8.0K b2/libdevice-usb-perl_0.38-3_amd64.buildinfo.asc https://buildinfo.debian.net/44ce122878cb737f3704d75b63186a03cd49842d/libdevice-usb-perl_0.38-3_amd64 Sat Feb 22 10:09:13 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Feb 22 10:09:13 UTC 2025 I: Done submitting .buildinfo files. Sat Feb 22 10:09:13 UTC 2025 I: Removing signed libdevice-usb-perl_0.38-3_amd64.buildinfo.asc files: removed './b1/libdevice-usb-perl_0.38-3_amd64.buildinfo.asc' removed './b2/libdevice-usb-perl_0.38-3_amd64.buildinfo.asc' 1740218953 amd64 trixie libdevice-usb-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libdevice-usb-perl_0.38-3.rbuild.log: 75.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libdevice-usb-perl_0.38-3.rbuild.log.gz [2025-02-22 10:09:13] INFO: Starting at 2025-02-22 10:09:13.835404 [2025-02-22 10:09:13] INFO: Generating the pages of 1 package(s) [2025-02-22 10:09:14] INFO: Finished at 2025-02-22 10:09:14.256592, took: 0:00:00.421195 All cleanup done. Sat Feb 22 10:09:14 UTC 2025 - total duration: 0h 3m 26s. Sat Feb 22 10:09:14 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-kcaz1Gcw, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 3min 30.429s CPU time consumed: 7.023s