Running as unit: rb-build-amd64_14-24286.service ==================================================================================== Thu Nov 21 17:27:18 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_14) on jenkins, called using "ionos5-amd64 ionos11-amd64" as arguments. Thu Nov 21 17:27:18 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-MhPMcjdl" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 17:27:18 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos5-amd64.debian.net is marked as down. Thu Nov 21 17:27:18 UTC 2024 - checking via ssh if ionos5-amd64.debian.net is up. removed '/tmp/read-only-fs-test-ySj8JW' Thu Nov 21 17:27:19 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos11-amd64.debian.net is marked as down. Thu Nov 21 17:27:19 UTC 2024 - checking via ssh if ionos11-amd64.debian.net is up. removed '/tmp/read-only-fs-test-dSNadk' ok, let's check if libb-utils-perl is building anywhere yet… ok, libb-utils-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libb-utils-perl in trixie on amd64 on jenkins now. 1st build will be done on ionos5-amd64.debian.net. 2nd build will be done on ionos11-amd64.debian.net. ============================================================================= Thu Nov 21 17:27:33 UTC 2024 I: starting to build libb-utils-perl/trixie/amd64 on jenkins on '2024-11-21 17:27' Thu Nov 21 17:27:33 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_14/24286/console.log 1732210053 amd64 trixie libb-utils-perl Thu Nov 21 17:27:33 UTC 2024 I: Downloading source for trixie/libb-utils-perl=0.27-3 --2024-11-21 17:27:33-- http://deb.debian.org/debian/pool/main/libb/libb-utils-perl/libb-utils-perl_0.27-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2294 (2.2K) [text/prs.lines.tag] Saving to: ‘libb-utils-perl_0.27-3.dsc’ 0K .. 100% 336M=0s 2024-11-21 17:27:33 (336 MB/s) - ‘libb-utils-perl_0.27-3.dsc’ saved [2294/2294] --2024-11-21 17:27:33-- http://deb.debian.org/debian/pool/main/libb/libb-utils-perl/libb-utils-perl_0.27-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2294 (2.2K) [text/prs.lines.tag] Saving to: ‘libb-utils-perl_0.27-3.dsc’ 0K .. 100% 336M=0s 2024-11-21 17:27:33 (336 MB/s) - ‘libb-utils-perl_0.27-3.dsc’ saved [2294/2294] Thu Nov 21 17:27:33 UTC 2024 I: libb-utils-perl_0.27-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libb-utils-perl Binary: libb-utils-perl Architecture: any Version: 0.27-3 Maintainer: Debian Perl Group Uploaders: Damyan Ivanov , gregor herrmann Homepage: https://metacpan.org/release/B-Utils Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libextutils-depends-perl, libtask-weaken-perl, perl-xs-dev, perl:native Package-List: libb-utils-perl deb perl optional arch=any Checksums-Sha1: 927c9642a0aff247172ea0457ee86ece6fe29ce7 74612 libb-utils-perl_0.27.orig.tar.gz a711b5ceff5f92a0b857d6172da2b02125994bff 3760 libb-utils-perl_0.27-3.debian.tar.xz Checksums-Sha256: f97f53f6a3050109aa414feeb184cad101812d41760e952b5d84993f6685ffea 74612 libb-utils-perl_0.27.orig.tar.gz 04fa6451269161769dd16f5d4c94f2650735004dd787a6537e9ebed33efdf256 3760 libb-utils-perl_0.27-3.debian.tar.xz Files: 340d6461afcec016ce6d0a0ba27290ba 74612 libb-utils-perl_0.27.orig.tar.gz d6c0e157ef17e347c1a6f24269b5d312 3760 libb-utils-perl_0.27-3.debian.tar.xz Dgit: 0352b47c7cd2828428c38091b1542a919e39eea8 debian archive/debian/0.27-3 https://git.dgit.debian.org/libb-utils-perl -----BEGIN PGP SIGNATURE----- iQJIBAEBCgAyFiEEj5GyJ8fW8rGUjII2eTz2fo8NEdoFAmWEnvoUHGVtb2xsaWVy QGRlYmlhbi5vcmcACgkQeTz2fo8NEdoCbg//ap4hqmwTAOw4YDmcDEvq6+2JT0oD mx+ntqZFHCJv2kvovALDu3U3a3B3GPyghUXvspmM3tuQ2XWfmdb8yIYDTyyPtTlc kmjG2mNwiZpwek5Xgnt8Ch8KXtBnHHLpwMu8l9Mb4MaDitCKDA489UO/AxXfOlLv Jowevnn1IJ+PMVJFfGisCl4mdfaMFPd/cc41j29k1C366N3hsAk6hr89xEvbbhjB C8aVvwIAX9MCA+G76LZpjX1psOn0pMjWHUPXcy9nS4TSj3LWw/haVH2ib5q24F+I ddpVncuAuDZJuCTL0FvXginXq4G9Jb6hPhtSgaf+Bs+a4l4B3mQ49KLoQE4//6N2 5eCh/9OGox4Ype1C/wFG5eqd+YWsnGoMB5iPC3PmH9QD8gajbhRbpl0Hnl/kUOCK 8ZVdYWd+3qFwbu0tjJALS5HKZNaGnMHj9fah2K1UdOAuSx9eSF/gebqwkY5YpxdA GzqjAVWp3kg8EYV0kzCJx9NhE6oANiQRFAQioXv4uH7v92S3fb5/H7wNah6bTYeX 7cAVm3GR53gs9AG6x4j3SvkfC1yIgwLAhrQFLIfH9jBWI2Fh22bQ3YWObHCNngKT 2ytQzyfLD3kiRL7EcLmq6ScLVIkyDBjGfbq1o4zT4YMx6SiVCLLbJtspbKa28ZZU lQ8pE63YNaIEdtg= =uGME -----END PGP SIGNATURE----- Thu Nov 21 17:27:33 UTC 2024 I: Checking whether the package is not for us Thu Nov 21 17:27:33 UTC 2024 I: Starting 1st build on remote node ionos5-amd64.debian.net. Thu Nov 21 17:27:33 UTC 2024 I: Preparing to do remote build '1' on ionos5-amd64.debian.net. Thu Nov 21 17:27:33 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos5-amd64.debian.net is marked as down. Thu Nov 21 17:27:33 UTC 2024 - checking via ssh if ionos5-amd64.debian.net is up. removed '/tmp/read-only-fs-test-2nGpeh' ==================================================================================== Wed Dec 24 23:50:34 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos5-amd64, called using "1 libb-utils-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD 0.27-3" as arguments. Wed Dec 24 23:50:34 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-V8hSAAp1" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Dec 24 23:50:34 UTC 2025 I: Downloading source for trixie/libb-utils-perl=0.27-3 Reading package lists... NOTICE: 'libb-utils-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 80.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (dsc) [2294 B] Get:2 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (tar) [74.6 kB] Get:3 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (diff) [3760 B] Fetched 80.7 kB in 0s (3846 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libb-utils-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 80.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (dsc) [2294 B] Get:2 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (tar) [74.6 kB] Get:3 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (diff) [3760 B] Fetched 80.7 kB in 0s (3846 kB/s) Download complete and in download only mode ============================================================================= Building libb-utils-perl in trixie on amd64 on ionos5-amd64 now. Date: Wed Dec 24 23:50:34 UTC 2025 Date UTC: Wed Dec 24 23:50:34 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 24 11:50:34 -12 2025 I: pbuilder-time-stamp: 1766620234 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libb-utils-perl_0.27-3.dsc] I: copying [./libb-utils-perl_0.27.orig.tar.gz] I: copying [./libb-utils-perl_0.27-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Dec 21 20:24:26 2023 gpgv: using RSA key 8F91B227C7D6F2B1948C8236793CF67E8F0D11DA gpgv: issuer "emollier@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libb-utils-perl_0.27-3.dsc: no acceptable signature found dpkg-source: info: extracting libb-utils-perl in libb-utils-perl-0.27 dpkg-source: info: unpacking libb-utils-perl_0.27.orig.tar.gz dpkg-source: info: unpacking libb-utils-perl_0.27-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3538940/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='b78a8d26a86d44859a9fc5d9b9013f47' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3538940' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_M7oy --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1 --logfile b1/build.log libb-utils-perl_0.27-3.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3538940/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libextutils-depends-perl, libtask-weaken-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libextutils-depends-perl; however: Package libextutils-depends-perl is not installed. pbuilder-satisfydepends-dummy depends on libtask-weaken-perl; however: Package libtask-weaken-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libextutils-depends-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtask-weaken-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 21.0 MB of archives. After unpacking 81.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.0-7 [1112 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libtask-weaken-perl all 1.06-2 [9364 B] Fetched 21.0 MB in 4s (4750 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libextutils-depends-perl. Preparing to unpack .../29-libextutils-depends-perl_0.8001-2_all.deb ... Unpacking libextutils-depends-perl (0.8001-2) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../30-libperl-dev_5.40.0-7_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.0-7) ... Selecting previously unselected package libtask-weaken-perl. Preparing to unpack .../31-libtask-weaken-perl_1.06-2_all.deb ... Unpacking libtask-weaken-perl (1.06-2) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libtask-weaken-perl (1.06-2) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libextutils-depends-perl (0.8001-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libb-utils-perl-0.27/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libb-utils-perl_0.27-3_source.changes dpkg-buildpackage: info: source package libb-utils-perl dpkg-buildpackage: info: source version 0.27-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Étienne Mollier dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for B::Utils Writing MYMETA.yml and MYMETA.json dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' Running Mkbootstrap for Utils () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' Utils.xs > Utils.xsc "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' OP.xs > OP.xsc chmod 644 "Utils.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 cp lib/B/Utils.pm blib/lib/B/Utils.pm cp lib/B/Utils/OP.pm blib/lib/B/Utils/OP.pm cp build/IFiles.pm blib/arch/B/Utils/Install/Files.pm cp typemap blib/arch/B/Utils/Install/typemap cp BUtils.h blib/arch/B/Utils/Install/BUtils.h mv Utils.xsc Utils.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" Utils.c mv OP.xsc OP.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" OP.c rm -f blib/arch/auto/B/Utils/Utils.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Utils.o OP.o -o blib/arch/auto/B/Utils/Utils.so \ \ chmod 755 blib/arch/auto/B/Utils/Utils.so Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/10use.t ........................... 1..2 ok 1 - use B::Utils; ok 2 - use B::Utils::OP; ok t/11export.t ........................ 1..12 ok 1 - Can import() ok 2 - Nothing is exported without asking ok 3 - All optional exports are exported via :all ok 4 - B::Utils exports all_starts ok 5 - B::Utils exports all_roots ok 6 - B::Utils exports anon_subs ok 7 - B::Utils exports recalc_sub_cache ok 8 - B::Utils exports walkoptree_simple ok 9 - B::Utils exports walkoptree_filtered ok 10 - B::Utils exports walkallops_simple ok 11 - B::Utils exports walkallops_filtered ok 12 - B::Utils->VERSION is specified ok t/regression_walkallops_filtered.t .. 1..3 ok 1 - defined &walkallops_filtered ok 2 - defined &opgrep ok 3 - Successfully called walkallops_filtered ok t/utils/20all_starts.t .............. 1..4 ok 1 - Found start ok 2 - Found correct start ok 3 - Found start ok 4 - Found correct start ok t/utils/21all_roots.t ............... 1..4 ok 1 - Found root ok 2 - Found correct root ok 3 - Found root ok 4 - Found correct root ok t/utils/22anon_subs.t ............... 1..2 ok 1 - Found correct anon sub ok 2 - Found correct anon sub ok t/utils/30parent.t .................. 1..181 ok 1 ok 2 - lineseq-LISTOP=(0x56253590d338) has a parent ok 3 - lineseq-LISTOP=(0x56253590d338) has the *right* parent B::UNOP=SCALAR(0x56253611dd08) ok 4 - nextstate-COP=(0x56253590d378) has a parent ok 5 - nextstate-COP=(0x56253590d378) has the *right* parent B::LISTOP=SCALAR(0x56253611cdf0) ok 6 - null-UNOP=(0x56253590d3d8) has a parent ok 7 - null-UNOP=(0x56253590d3d8) has the *right* parent B::LISTOP=SCALAR(0x56253611f490) ok 8 - and-LOGOP=(0x56253590d410) has a parent ok 9 - and-LOGOP=(0x56253590d410) has the *right* parent B::UNOP=SCALAR(0x56253612f378) ok 10 - entersub-UNOP=(0x56253590cdf0) has a parent ok 11 - entersub-UNOP=(0x56253590cdf0) has the *right* parent B::LOGOP=SCALAR(0x562536131e50) ok 12 - null-UNOP=(0x56253590d450) has a parent ok 13 - null-UNOP=(0x56253590d450) has the *right* parent B::UNOP=SCALAR(0x56253611f880) ok 14 - pushmark-OP=(0x56253590ce60) has a parent ok 15 - pushmark-OP=(0x56253590ce60) has the *right* parent B::UNOP=SCALAR(0x56253611fd18) ok 16 - null-UNOP=(0x56253590ce28) has a parent ok 17 - null-UNOP=(0x56253590ce28) has the *right* parent B::UNOP=SCALAR(0x56253611ff88) ok 18 - gv-PADOP=(0x56253590ce98) has a parent ok 19 - gv-PADOP=(0x56253590ce98) has the *right* parent B::UNOP=SCALAR(0x56253611f8c8) ok 20 - entersub-UNOP=(0x56253590ced0) has a parent ok 21 - entersub-UNOP=(0x56253590ced0) has the *right* parent B::LOGOP=SCALAR(0x562536132828) ok 22 - null-UNOP=(0x56253590cf08) has a parent ok 23 - null-UNOP=(0x56253590cf08) has the *right* parent B::UNOP=SCALAR(0x56253611f940) ok 24 - pushmark-OP=(0x56253590cf80) has a parent ok 25 - pushmark-OP=(0x56253590cf80) has the *right* parent B::UNOP=SCALAR(0x56253611f6b8) ok 26 - null-UNOP=(0x56253590cf48) has a parent ok 27 - null-UNOP=(0x56253590cf48) has the *right* parent B::UNOP=SCALAR(0x562536128848) ok 28 - gv-PADOP=(0x56253590cfb8) has a parent ok 29 - gv-PADOP=(0x56253590cfb8) has the *right* parent B::UNOP=SCALAR(0x562536126690) ok 30 - nextstate-COP=(0x562535a29120) has a parent ok 31 - nextstate-COP=(0x562535a29120) has the *right* parent B::LISTOP=SCALAR(0x562536128260) ok 32 - leaveloop-BINOP=(0x562535a29180) has a parent ok 33 - leaveloop-BINOP=(0x562535a29180) has the *right* parent B::LISTOP=SCALAR(0x56253611fb08) ok 34 - enteriter-LOOP=(0x562535a292a8) has a parent ok 35 - enteriter-LOOP=(0x562535a292a8) has the *right* parent B::BINOP=SCALAR(0x5625360af4f0) ok 36 - null-OP=(0x562535a29340) has a parent ok 37 - null-OP=(0x562535a29340) has the *right* parent B::LOOP=SCALAR(0x562536126090) ok 38 - null-UNOP=(0x562535a29370) has a parent ok 39 - null-UNOP=(0x562535a29370) has the *right* parent B::LOOP=SCALAR(0x56253611f808) ok 40 - pushmark-OP=(0x56253590d090) has a parent ok 41 - pushmark-OP=(0x56253590d090) has the *right* parent B::UNOP=SCALAR(0x56253612cdd8) ok 42 - entersub-UNOP=(0x56253590d0f8) has a parent ok 43 - entersub-UNOP=(0x56253590d0f8) has the *right* parent B::UNOP=SCALAR(0x562536126648) ok 44 - null-UNOP=(0x56253590d130) has a parent ok 45 - null-UNOP=(0x56253590d130) has the *right* parent B::UNOP=SCALAR(0x5625361284a0) ok 46 - pushmark-OP=(0x56253590d1a8) has a parent ok 47 - pushmark-OP=(0x56253590d1a8) has the *right* parent B::UNOP=SCALAR(0x56253612cb08) ok 48 - null-UNOP=(0x56253590d170) has a parent ok 49 - null-UNOP=(0x56253590d170) has the *right* parent B::UNOP=SCALAR(0x56253612f1f8) ok 50 - gv-PADOP=(0x56253590d1e0) has a parent ok 51 - gv-PADOP=(0x56253590d1e0) has the *right* parent B::UNOP=SCALAR(0x56253611f490) ok 52 - gv-PADOP=(0x56253590d0c0) has a parent ok 53 - gv-PADOP=(0x56253590d0c0) has the *right* parent B::LOOP=SCALAR(0x562536126648) ok 54 - null-UNOP=(0x562535a291c0) has a parent ok 55 - null-UNOP=(0x562535a291c0) has the *right* parent B::BINOP=SCALAR(0x56253612c358) ok 56 - and-LOGOP=(0x562535a291f8) has a parent ok 57 - and-LOGOP=(0x562535a291f8) has the *right* parent B::UNOP=SCALAR(0x56253612f228) ok 58 - iter-OP=(0x562535a29300) has a parent ok 59 - iter-OP=(0x562535a29300) has the *right* parent B::LOGOP=SCALAR(0x562536131a30) ok 60 - lineseq-LISTOP=(0x562535a29238) has a parent ok 61 - lineseq-LISTOP=(0x562535a29238) has the *right* parent B::LOGOP=SCALAR(0x56253612cdf0) ok 62 - entersub-UNOP=(0x56253590d218) has a parent ok 63 - entersub-UNOP=(0x56253590d218) has the *right* parent B::LISTOP=SCALAR(0x562536131ee0) ok 64 - null-UNOP=(0x56253590d250) has a parent ok 65 - null-UNOP=(0x56253590d250) has the *right* parent B::UNOP=SCALAR(0x562536132180) ok 66 - pushmark-OP=(0x56253590d2c8) has a parent ok 67 - pushmark-OP=(0x56253590d2c8) has the *right* parent B::UNOP=SCALAR(0x56253613c140) ok 68 - null-UNOP=(0x56253590d290) has a parent ok 69 - null-UNOP=(0x56253590d290) has the *right* parent B::UNOP=SCALAR(0x562536128278) ok 70 - gv-PADOP=(0x56253590d300) has a parent ok 71 - gv-PADOP=(0x56253590d300) has the *right* parent B::UNOP=SCALAR(0x562536137570) ok 72 - unstack-OP=(0x562535a29278) has a parent ok 73 - unstack-OP=(0x562535a29278) has the *right* parent B::LISTOP=SCALAR(0x562536132060) ok 74 - nextstate-COP=(0x562535a29008) has a parent ok 75 - nextstate-COP=(0x562535a29008) has the *right* parent B::LISTOP=SCALAR(0x562536137150) ok 76 - padsv_store-UNOP=(0x562535a29068) has a parent ok 77 - padsv_store-UNOP=(0x562535a29068) has the *right* parent B::LISTOP=SCALAR(0x56253612c2c8) ok 78 - const-SVOP=(0x562535a290a8) has a parent ok 79 - const-SVOP=(0x562535a290a8) has the *right* parent B::UNOP=SCALAR(0x562536136f70) ok 80 - null-OP=(0x562535a290e0) has a parent ok 81 - null-OP=(0x562535a290e0) has the *right* parent B::UNOP=SCALAR(0x56253612c460) ok 82 - nextstate-COP=(0x562535a1e260) has a parent ok 83 - nextstate-COP=(0x562535a1e260) has the *right* parent B::LISTOP=SCALAR(0x562536131e20) ok 84 - leave-LISTOP=(0x562535a28bc0) has a parent ok 85 - leave-LISTOP=(0x562535a28bc0) has the *right* parent B::LISTOP=SCALAR(0x56253613c3b0) ok 86 - enter-OP=(0x562535a28c00) has a parent ok 87 - enter-OP=(0x562535a28c00) has the *right* parent B::LISTOP=SCALAR(0x56253613bd80) ok 88 - null-UNOP=(0x562535a28c30) has a parent ok 89 - null-UNOP=(0x562535a28c30) has the *right* parent B::LISTOP=SCALAR(0x562536136eb0) ok 90 - and-LOGOP=(0x562535a28c68) has a parent ok 91 - and-LOGOP=(0x562535a28c68) has the *right* parent B::UNOP=SCALAR(0x562536132978) ok 92 - lt-BINOP=(0x562535a28d18) has a parent ok 93 - lt-BINOP=(0x562535a28d18) has the *right* parent B::LOGOP=SCALAR(0x5625361427f8) ok 94 - entersub-UNOP=(0x562535a28dc0) has a parent ok 95 - entersub-UNOP=(0x562535a28dc0) has the *right* parent B::BINOP=SCALAR(0x56253612fa80) ok 96 - null-UNOP=(0x562535a28df8) has a parent ok 97 - null-UNOP=(0x562535a28df8) has the *right* parent B::UNOP=SCALAR(0x56253613c4b8) ok 98 - pushmark-OP=(0x562535a28e70) has a parent ok 99 - pushmark-OP=(0x562535a28e70) has the *right* parent B::UNOP=SCALAR(0x562536137768) ok 100 - null-UNOP=(0x562535a28e38) has a parent ok 101 - null-UNOP=(0x562535a28e38) has the *right* parent B::UNOP=SCALAR(0x562536142a80) ok 102 - gv-PADOP=(0x562535a28ea8) has a parent ok 103 - gv-PADOP=(0x562535a28ea8) has the *right* parent B::UNOP=SCALAR(0x56253613c290) ok 104 - predec-UNOP=(0x562535a28d58) has a parent ok 105 - predec-UNOP=(0x562535a28d58) has the *right* parent B::BINOP=SCALAR(0x56253613c458) ok 106 - padsv-OP=(0x562535a28d90) has a parent ok 107 - padsv-OP=(0x562535a28d90) has the *right* parent B::UNOP=SCALAR(0x562536142ff0) ok 108 - lineseq-LISTOP=(0x562535a28ca8) has a parent ok 109 - lineseq-LISTOP=(0x562535a28ca8) has the *right* parent B::LOGOP=SCALAR(0x5625361431d0) ok 110 - entersub-UNOP=(0x562535a28ee0) has a parent ok 111 - entersub-UNOP=(0x562535a28ee0) has the *right* parent B::LISTOP=SCALAR(0x562536142a08) ok 112 - null-UNOP=(0x562535a28f18) has a parent ok 113 - null-UNOP=(0x562535a28f18) has the *right* parent B::UNOP=SCALAR(0x5625361370c0) ok 114 - pushmark-OP=(0x562535a28f90) has a parent ok 115 - pushmark-OP=(0x562535a28f90) has the *right* parent B::UNOP=SCALAR(0x56253613cb60) ok 116 - null-UNOP=(0x562535a28f58) has a parent ok 117 - null-UNOP=(0x562535a28f58) has the *right* parent B::UNOP=SCALAR(0x562536142fd8) ok 118 - gv-PADOP=(0x562535a28fc8) has a parent ok 119 - gv-PADOP=(0x562535a28fc8) has the *right* parent B::UNOP=SCALAR(0x562536142648) ok 120 - unstack-OP=(0x562535a28ce8) has a parent ok 121 - unstack-OP=(0x562535a28ce8) has the *right* parent B::LISTOP=SCALAR(0x562536142af8) ok 122 - nextstate-COP=(0x562535a1de30) has a parent ok 123 - nextstate-COP=(0x562535a1de30) has the *right* parent B::LISTOP=SCALAR(0x562536142b88) ok 124 - padsv-OP=(0x562535a1e220) has a parent ok 125 - padsv-OP=(0x562535a1e220) has the *right* parent B::LISTOP=SCALAR(0x562536143110) ok 126 - unstack-OP=(0x562535a1ded0) has a parent ok 127 - unstack-OP=(0x562535a1ded0) has the *right* parent B::LISTOP=SCALAR(0x562536142960) ok 128 - leaveloop-BINOP=(0x562535a1df00) has a parent ok 129 - leaveloop-BINOP=(0x562535a1df00) has the *right* parent B::LISTOP=SCALAR(0x56253611ff10) ok 130 - enterloop-LOOP=(0x562535a1df40) has a parent ok 131 - enterloop-LOOP=(0x562535a1df40) has the *right* parent B::BINOP=SCALAR(0x562536142768) ok 132 - null-UNOP=(0x562535a1df98) has a parent ok 133 - null-UNOP=(0x562535a1df98) has the *right* parent B::BINOP=SCALAR(0x56253614dc20) ok 134 - and-LOGOP=(0x562535a1dfd0) has a parent ok 135 - and-LOGOP=(0x562535a1dfd0) has the *right* parent B::UNOP=SCALAR(0x56253614dda0) ok 136 - padsv-OP=(0x562535a1e1f0) has a parent ok 137 - padsv-OP=(0x562535a1e1f0) has the *right* parent B::LOGOP=SCALAR(0x56253614e298) ok 138 - lineseq-LISTOP=(0x562535a1e010) has a parent ok 139 - lineseq-LISTOP=(0x562535a1e010) has the *right* parent B::LOGOP=SCALAR(0x56253614e0b8) ok 140 - scope-LISTOP=(0x562535a1e080) has a parent ok 141 - scope-LISTOP=(0x562535a1e080) has the *right* parent B::LISTOP=SCALAR(0x562536142c18) ok 142 - null-COP=(0x562535a1e0c0) has a parent ok 143 - null-COP=(0x562535a1e0c0) has the *right* parent B::LISTOP=SCALAR(0x56253614dbf0) ok 144 - preinc-UNOP=(0x562535a1e120) has a parent ok 145 - preinc-UNOP=(0x562535a1e120) has the *right* parent B::LISTOP=SCALAR(0x5625361430f8) ok 146 - padsv-OP=(0x562535a1e158) has a parent ok 147 - padsv-OP=(0x562535a1e158) has the *right* parent B::UNOP=SCALAR(0x56253614e628) ok 148 - preinc-UNOP=(0x562535a1e188) has a parent ok 149 - preinc-UNOP=(0x562535a1e188) has the *right* parent B::LISTOP=SCALAR(0x5625361430f8) ok 150 - padsv-OP=(0x562535a1e1c0) has a parent ok 151 - padsv-OP=(0x562535a1e1c0) has the *right* parent B::UNOP=SCALAR(0x56253614e820) ok 152 - unstack-OP=(0x562535a1e050) has a parent ok 153 - unstack-OP=(0x562535a1e050) has the *right* parent B::LISTOP=SCALAR(0x5625361521a8) ok 154 - nextstate-COP=(0x562535a1db00) has a parent ok 155 - nextstate-COP=(0x562535a1db00) has the *right* parent B::LISTOP=SCALAR(0x56253614e628) ok 156 - leaveloop-BINOP=(0x562535a1db60) has a parent ok 157 - leaveloop-BINOP=(0x562535a1db60) has the *right* parent B::LISTOP=SCALAR(0x56253614e2e0) ok 158 - enteriter-LOOP=(0x562535a1dc88) has a parent ok 159 - enteriter-LOOP=(0x562535a1dc88) has the *right* parent B::BINOP=SCALAR(0x562536152028) ok 160 - null-OP=(0x562535a1dd20) has a parent ok 161 - null-OP=(0x562535a1dd20) has the *right* parent B::LOOP=SCALAR(0x56253614e988) ok 162 - null-UNOP=(0x562535a1dd50) has a parent ok 163 - null-UNOP=(0x562535a1dd50) has the *right* parent B::LOOP=SCALAR(0x562536151b18) ok 164 - pushmark-OP=(0x562535a1dd90) has a parent ok 165 - pushmark-OP=(0x562535a1dd90) has the *right* parent B::UNOP=SCALAR(0x56253614e628) ok 166 - const-SVOP=(0x562535a1ddf8) has a parent ok 167 - const-SVOP=(0x562535a1ddf8) has the *right* parent B::UNOP=SCALAR(0x562536151ef0) ok 168 - gv-PADOP=(0x562535a1ddc0) has a parent ok 169 - gv-PADOP=(0x562535a1ddc0) has the *right* parent B::LOOP=SCALAR(0x562536152610) ok 170 - null-UNOP=(0x562535a1dba0) has a parent ok 171 - null-UNOP=(0x562535a1dba0) has the *right* parent B::BINOP=SCALAR(0x562536151920) ok 172 - and-LOGOP=(0x562535a1dbd8) has a parent ok 173 - and-LOGOP=(0x562535a1dbd8) has the *right* parent B::UNOP=SCALAR(0x562536152358) ok 174 - iter-OP=(0x562535a1dce0) has a parent ok 175 - iter-OP=(0x562535a1dce0) has the *right* parent B::LOGOP=SCALAR(0x562536152268) ok 176 - lineseq-LISTOP=(0x562535a1dc18) has a parent ok 177 - lineseq-LISTOP=(0x562535a1dc18) has the *right* parent B::LOGOP=SCALAR(0x562536152178) ok 178 - null-OP=(0x562535a1de90) has a parent ok 179 - null-OP=(0x562535a1de90) has the *right* parent B::LISTOP=SCALAR(0x562536159068) ok 180 - unstack-OP=(0x562535a1dc58) has a parent ok 181 - unstack-OP=(0x562535a1dc58) has the *right* parent B::LISTOP=SCALAR(0x562536159068) ok t/utils/31oldname.t ................. skipped: No tests written yet. t/utils/32kids.t .................... skipped: No tests written yet. t/utils/33ancestors.t ............... skipped: No tests written yet. t/utils/34descendants.t ............. skipped: No tests written yet. t/utils/35siblings.t ................ skipped: No tests written yet. t/utils/36previous.t ................ skipped: No tests written yet. t/utils/37stringify.t ............... skipped: No tests written yet. t/utils/40walk.t .................... ok 1 - walkoptree_simple lines of t/utils/40walk.t ok 2 1..2 ok t/utils/41walkfilt.t ................ skipped: No tests written yet. t/utils/42all.t ..................... skipped: No tests written yet. t/utils/43allfilt.t ................. skipped: No tests written yet. t/utils/44optrep.t .................. skipped: No tests written yet. t/utils/50carp.t .................... skipped: No tests written yet. t/utils/51croak.t ................... skipped: No tests written yet. All tests successful. Files=21, Tests=210, 2 wallclock secs ( 0.09 usr 0.02 sys + 1.85 cusr 0.28 csys = 2.24 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libb-utils-perl/ make -j42 install DESTDIR=/build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/BUtils.h Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/Files.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/typemap Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/B/Utils/Utils.so Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/OP.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/share/man/man3/B::Utils::OP.3pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/share/man/man3/B::Utils.3pm make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libb-utils-perl' in '../libb-utils-perl_0.27-3_amd64.deb'. dpkg-deb: building package 'libb-utils-perl-dbgsym' in '../libb-utils-perl-dbgsym_0.27-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libb-utils-perl_0.27-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libb-utils-perl_0.27-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3538940 and its subdirectories I: Current time: Wed Dec 24 11:51:12 -12 2025 I: pbuilder-time-stamp: 1766620272 Wed Dec 24 23:51:12 UTC 2025 I: Signing ./b1/libb-utils-perl_0.27-3_amd64.buildinfo as libb-utils-perl_0.27-3_amd64.buildinfo.asc Wed Dec 24 23:51:12 UTC 2025 I: Signed ./b1/libb-utils-perl_0.27-3_amd64.buildinfo as ./b1/libb-utils-perl_0.27-3_amd64.buildinfo.asc Wed Dec 24 23:51:12 UTC 2025 - build #1 for libb-utils-perl/trixie/amd64 on ionos5-amd64 done. Starting cleanup. All cleanup done. Wed Dec 24 23:51:12 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-V8hSAAp1, removing. /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:28 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:27 b2 -rw-r--r-- 1 jenkins jenkins 2294 Dec 21 2023 libb-utils-perl_0.27-3.dsc -rw------- 1 jenkins jenkins 3444 Nov 21 17:27 rbuildlog.YXIDdUt /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1: total 140 -rw-r--r-- 1 jenkins jenkins 39500 Nov 21 17:28 build.log -rw-r--r-- 1 jenkins jenkins 34080 Nov 21 17:28 libb-utils-perl-dbgsym_0.27-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 3760 Nov 21 17:28 libb-utils-perl_0.27-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2294 Nov 21 17:28 libb-utils-perl_0.27-3.dsc -rw-r--r-- 1 jenkins jenkins 5116 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 5998 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1578 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 29496 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 1418 Nov 21 17:28 libb-utils-perl_0.27-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2: total 0 Thu Nov 21 17:28:13 UTC 2024 I: Deleting $TMPDIR on ionos5-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 24 11:50:34 -12 2025 I: pbuilder-time-stamp: 1766620234 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libb-utils-perl_0.27-3.dsc] I: copying [./libb-utils-perl_0.27.orig.tar.gz] I: copying [./libb-utils-perl_0.27-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Dec 21 20:24:26 2023 gpgv: using RSA key 8F91B227C7D6F2B1948C8236793CF67E8F0D11DA gpgv: issuer "emollier@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libb-utils-perl_0.27-3.dsc: no acceptable signature found dpkg-source: info: extracting libb-utils-perl in libb-utils-perl-0.27 dpkg-source: info: unpacking libb-utils-perl_0.27.orig.tar.gz dpkg-source: info: unpacking libb-utils-perl_0.27-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3538940/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='b78a8d26a86d44859a9fc5d9b9013f47' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3538940' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_M7oy --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1 --logfile b1/build.log libb-utils-perl_0.27-3.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3538940/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libextutils-depends-perl, libtask-weaken-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libextutils-depends-perl; however: Package libextutils-depends-perl is not installed. pbuilder-satisfydepends-dummy depends on libtask-weaken-perl; however: Package libtask-weaken-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libextutils-depends-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtask-weaken-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 21.0 MB of archives. After unpacking 81.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.0-7 [1112 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libtask-weaken-perl all 1.06-2 [9364 B] Fetched 21.0 MB in 4s (4750 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libextutils-depends-perl. Preparing to unpack .../29-libextutils-depends-perl_0.8001-2_all.deb ... Unpacking libextutils-depends-perl (0.8001-2) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../30-libperl-dev_5.40.0-7_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.0-7) ... Selecting previously unselected package libtask-weaken-perl. Preparing to unpack .../31-libtask-weaken-perl_1.06-2_all.deb ... Unpacking libtask-weaken-perl (1.06-2) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libtask-weaken-perl (1.06-2) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libextutils-depends-perl (0.8001-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libb-utils-perl-0.27/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libb-utils-perl_0.27-3_source.changes dpkg-buildpackage: info: source package libb-utils-perl dpkg-buildpackage: info: source version 0.27-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Étienne Mollier dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for B::Utils Writing MYMETA.yml and MYMETA.json dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' Running Mkbootstrap for Utils () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' Utils.xs > Utils.xsc "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' OP.xs > OP.xsc chmod 644 "Utils.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 cp lib/B/Utils.pm blib/lib/B/Utils.pm cp lib/B/Utils/OP.pm blib/lib/B/Utils/OP.pm cp build/IFiles.pm blib/arch/B/Utils/Install/Files.pm cp typemap blib/arch/B/Utils/Install/typemap cp BUtils.h blib/arch/B/Utils/Install/BUtils.h mv Utils.xsc Utils.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" Utils.c mv OP.xsc OP.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" OP.c rm -f blib/arch/auto/B/Utils/Utils.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Utils.o OP.o -o blib/arch/auto/B/Utils/Utils.so \ \ chmod 755 blib/arch/auto/B/Utils/Utils.so Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/10use.t ........................... 1..2 ok 1 - use B::Utils; ok 2 - use B::Utils::OP; ok t/11export.t ........................ 1..12 ok 1 - Can import() ok 2 - Nothing is exported without asking ok 3 - All optional exports are exported via :all ok 4 - B::Utils exports all_starts ok 5 - B::Utils exports all_roots ok 6 - B::Utils exports anon_subs ok 7 - B::Utils exports recalc_sub_cache ok 8 - B::Utils exports walkoptree_simple ok 9 - B::Utils exports walkoptree_filtered ok 10 - B::Utils exports walkallops_simple ok 11 - B::Utils exports walkallops_filtered ok 12 - B::Utils->VERSION is specified ok t/regression_walkallops_filtered.t .. 1..3 ok 1 - defined &walkallops_filtered ok 2 - defined &opgrep ok 3 - Successfully called walkallops_filtered ok t/utils/20all_starts.t .............. 1..4 ok 1 - Found start ok 2 - Found correct start ok 3 - Found start ok 4 - Found correct start ok t/utils/21all_roots.t ............... 1..4 ok 1 - Found root ok 2 - Found correct root ok 3 - Found root ok 4 - Found correct root ok t/utils/22anon_subs.t ............... 1..2 ok 1 - Found correct anon sub ok 2 - Found correct anon sub ok t/utils/30parent.t .................. 1..181 ok 1 ok 2 - lineseq-LISTOP=(0x56253590d338) has a parent ok 3 - lineseq-LISTOP=(0x56253590d338) has the *right* parent B::UNOP=SCALAR(0x56253611dd08) ok 4 - nextstate-COP=(0x56253590d378) has a parent ok 5 - nextstate-COP=(0x56253590d378) has the *right* parent B::LISTOP=SCALAR(0x56253611cdf0) ok 6 - null-UNOP=(0x56253590d3d8) has a parent ok 7 - null-UNOP=(0x56253590d3d8) has the *right* parent B::LISTOP=SCALAR(0x56253611f490) ok 8 - and-LOGOP=(0x56253590d410) has a parent ok 9 - and-LOGOP=(0x56253590d410) has the *right* parent B::UNOP=SCALAR(0x56253612f378) ok 10 - entersub-UNOP=(0x56253590cdf0) has a parent ok 11 - entersub-UNOP=(0x56253590cdf0) has the *right* parent B::LOGOP=SCALAR(0x562536131e50) ok 12 - null-UNOP=(0x56253590d450) has a parent ok 13 - null-UNOP=(0x56253590d450) has the *right* parent B::UNOP=SCALAR(0x56253611f880) ok 14 - pushmark-OP=(0x56253590ce60) has a parent ok 15 - pushmark-OP=(0x56253590ce60) has the *right* parent B::UNOP=SCALAR(0x56253611fd18) ok 16 - null-UNOP=(0x56253590ce28) has a parent ok 17 - null-UNOP=(0x56253590ce28) has the *right* parent B::UNOP=SCALAR(0x56253611ff88) ok 18 - gv-PADOP=(0x56253590ce98) has a parent ok 19 - gv-PADOP=(0x56253590ce98) has the *right* parent B::UNOP=SCALAR(0x56253611f8c8) ok 20 - entersub-UNOP=(0x56253590ced0) has a parent ok 21 - entersub-UNOP=(0x56253590ced0) has the *right* parent B::LOGOP=SCALAR(0x562536132828) ok 22 - null-UNOP=(0x56253590cf08) has a parent ok 23 - null-UNOP=(0x56253590cf08) has the *right* parent B::UNOP=SCALAR(0x56253611f940) ok 24 - pushmark-OP=(0x56253590cf80) has a parent ok 25 - pushmark-OP=(0x56253590cf80) has the *right* parent B::UNOP=SCALAR(0x56253611f6b8) ok 26 - null-UNOP=(0x56253590cf48) has a parent ok 27 - null-UNOP=(0x56253590cf48) has the *right* parent B::UNOP=SCALAR(0x562536128848) ok 28 - gv-PADOP=(0x56253590cfb8) has a parent ok 29 - gv-PADOP=(0x56253590cfb8) has the *right* parent B::UNOP=SCALAR(0x562536126690) ok 30 - nextstate-COP=(0x562535a29120) has a parent ok 31 - nextstate-COP=(0x562535a29120) has the *right* parent B::LISTOP=SCALAR(0x562536128260) ok 32 - leaveloop-BINOP=(0x562535a29180) has a parent ok 33 - leaveloop-BINOP=(0x562535a29180) has the *right* parent B::LISTOP=SCALAR(0x56253611fb08) ok 34 - enteriter-LOOP=(0x562535a292a8) has a parent ok 35 - enteriter-LOOP=(0x562535a292a8) has the *right* parent B::BINOP=SCALAR(0x5625360af4f0) ok 36 - null-OP=(0x562535a29340) has a parent ok 37 - null-OP=(0x562535a29340) has the *right* parent B::LOOP=SCALAR(0x562536126090) ok 38 - null-UNOP=(0x562535a29370) has a parent ok 39 - null-UNOP=(0x562535a29370) has the *right* parent B::LOOP=SCALAR(0x56253611f808) ok 40 - pushmark-OP=(0x56253590d090) has a parent ok 41 - pushmark-OP=(0x56253590d090) has the *right* parent B::UNOP=SCALAR(0x56253612cdd8) ok 42 - entersub-UNOP=(0x56253590d0f8) has a parent ok 43 - entersub-UNOP=(0x56253590d0f8) has the *right* parent B::UNOP=SCALAR(0x562536126648) ok 44 - null-UNOP=(0x56253590d130) has a parent ok 45 - null-UNOP=(0x56253590d130) has the *right* parent B::UNOP=SCALAR(0x5625361284a0) ok 46 - pushmark-OP=(0x56253590d1a8) has a parent ok 47 - pushmark-OP=(0x56253590d1a8) has the *right* parent B::UNOP=SCALAR(0x56253612cb08) ok 48 - null-UNOP=(0x56253590d170) has a parent ok 49 - null-UNOP=(0x56253590d170) has the *right* parent B::UNOP=SCALAR(0x56253612f1f8) ok 50 - gv-PADOP=(0x56253590d1e0) has a parent ok 51 - gv-PADOP=(0x56253590d1e0) has the *right* parent B::UNOP=SCALAR(0x56253611f490) ok 52 - gv-PADOP=(0x56253590d0c0) has a parent ok 53 - gv-PADOP=(0x56253590d0c0) has the *right* parent B::LOOP=SCALAR(0x562536126648) ok 54 - null-UNOP=(0x562535a291c0) has a parent ok 55 - null-UNOP=(0x562535a291c0) has the *right* parent B::BINOP=SCALAR(0x56253612c358) ok 56 - and-LOGOP=(0x562535a291f8) has a parent ok 57 - and-LOGOP=(0x562535a291f8) has the *right* parent B::UNOP=SCALAR(0x56253612f228) ok 58 - iter-OP=(0x562535a29300) has a parent ok 59 - iter-OP=(0x562535a29300) has the *right* parent B::LOGOP=SCALAR(0x562536131a30) ok 60 - lineseq-LISTOP=(0x562535a29238) has a parent ok 61 - lineseq-LISTOP=(0x562535a29238) has the *right* parent B::LOGOP=SCALAR(0x56253612cdf0) ok 62 - entersub-UNOP=(0x56253590d218) has a parent ok 63 - entersub-UNOP=(0x56253590d218) has the *right* parent B::LISTOP=SCALAR(0x562536131ee0) ok 64 - null-UNOP=(0x56253590d250) has a parent ok 65 - null-UNOP=(0x56253590d250) has the *right* parent B::UNOP=SCALAR(0x562536132180) ok 66 - pushmark-OP=(0x56253590d2c8) has a parent ok 67 - pushmark-OP=(0x56253590d2c8) has the *right* parent B::UNOP=SCALAR(0x56253613c140) ok 68 - null-UNOP=(0x56253590d290) has a parent ok 69 - null-UNOP=(0x56253590d290) has the *right* parent B::UNOP=SCALAR(0x562536128278) ok 70 - gv-PADOP=(0x56253590d300) has a parent ok 71 - gv-PADOP=(0x56253590d300) has the *right* parent B::UNOP=SCALAR(0x562536137570) ok 72 - unstack-OP=(0x562535a29278) has a parent ok 73 - unstack-OP=(0x562535a29278) has the *right* parent B::LISTOP=SCALAR(0x562536132060) ok 74 - nextstate-COP=(0x562535a29008) has a parent ok 75 - nextstate-COP=(0x562535a29008) has the *right* parent B::LISTOP=SCALAR(0x562536137150) ok 76 - padsv_store-UNOP=(0x562535a29068) has a parent ok 77 - padsv_store-UNOP=(0x562535a29068) has the *right* parent B::LISTOP=SCALAR(0x56253612c2c8) ok 78 - const-SVOP=(0x562535a290a8) has a parent ok 79 - const-SVOP=(0x562535a290a8) has the *right* parent B::UNOP=SCALAR(0x562536136f70) ok 80 - null-OP=(0x562535a290e0) has a parent ok 81 - null-OP=(0x562535a290e0) has the *right* parent B::UNOP=SCALAR(0x56253612c460) ok 82 - nextstate-COP=(0x562535a1e260) has a parent ok 83 - nextstate-COP=(0x562535a1e260) has the *right* parent B::LISTOP=SCALAR(0x562536131e20) ok 84 - leave-LISTOP=(0x562535a28bc0) has a parent ok 85 - leave-LISTOP=(0x562535a28bc0) has the *right* parent B::LISTOP=SCALAR(0x56253613c3b0) ok 86 - enter-OP=(0x562535a28c00) has a parent ok 87 - enter-OP=(0x562535a28c00) has the *right* parent B::LISTOP=SCALAR(0x56253613bd80) ok 88 - null-UNOP=(0x562535a28c30) has a parent ok 89 - null-UNOP=(0x562535a28c30) has the *right* parent B::LISTOP=SCALAR(0x562536136eb0) ok 90 - and-LOGOP=(0x562535a28c68) has a parent ok 91 - and-LOGOP=(0x562535a28c68) has the *right* parent B::UNOP=SCALAR(0x562536132978) ok 92 - lt-BINOP=(0x562535a28d18) has a parent ok 93 - lt-BINOP=(0x562535a28d18) has the *right* parent B::LOGOP=SCALAR(0x5625361427f8) ok 94 - entersub-UNOP=(0x562535a28dc0) has a parent ok 95 - entersub-UNOP=(0x562535a28dc0) has the *right* parent B::BINOP=SCALAR(0x56253612fa80) ok 96 - null-UNOP=(0x562535a28df8) has a parent ok 97 - null-UNOP=(0x562535a28df8) has the *right* parent B::UNOP=SCALAR(0x56253613c4b8) ok 98 - pushmark-OP=(0x562535a28e70) has a parent ok 99 - pushmark-OP=(0x562535a28e70) has the *right* parent B::UNOP=SCALAR(0x562536137768) ok 100 - null-UNOP=(0x562535a28e38) has a parent ok 101 - null-UNOP=(0x562535a28e38) has the *right* parent B::UNOP=SCALAR(0x562536142a80) ok 102 - gv-PADOP=(0x562535a28ea8) has a parent ok 103 - gv-PADOP=(0x562535a28ea8) has the *right* parent B::UNOP=SCALAR(0x56253613c290) ok 104 - predec-UNOP=(0x562535a28d58) has a parent ok 105 - predec-UNOP=(0x562535a28d58) has the *right* parent B::BINOP=SCALAR(0x56253613c458) ok 106 - padsv-OP=(0x562535a28d90) has a parent ok 107 - padsv-OP=(0x562535a28d90) has the *right* parent B::UNOP=SCALAR(0x562536142ff0) ok 108 - lineseq-LISTOP=(0x562535a28ca8) has a parent ok 109 - lineseq-LISTOP=(0x562535a28ca8) has the *right* parent B::LOGOP=SCALAR(0x5625361431d0) ok 110 - entersub-UNOP=(0x562535a28ee0) has a parent ok 111 - entersub-UNOP=(0x562535a28ee0) has the *right* parent B::LISTOP=SCALAR(0x562536142a08) ok 112 - null-UNOP=(0x562535a28f18) has a parent ok 113 - null-UNOP=(0x562535a28f18) has the *right* parent B::UNOP=SCALAR(0x5625361370c0) ok 114 - pushmark-OP=(0x562535a28f90) has a parent ok 115 - pushmark-OP=(0x562535a28f90) has the *right* parent B::UNOP=SCALAR(0x56253613cb60) ok 116 - null-UNOP=(0x562535a28f58) has a parent ok 117 - null-UNOP=(0x562535a28f58) has the *right* parent B::UNOP=SCALAR(0x562536142fd8) ok 118 - gv-PADOP=(0x562535a28fc8) has a parent ok 119 - gv-PADOP=(0x562535a28fc8) has the *right* parent B::UNOP=SCALAR(0x562536142648) ok 120 - unstack-OP=(0x562535a28ce8) has a parent ok 121 - unstack-OP=(0x562535a28ce8) has the *right* parent B::LISTOP=SCALAR(0x562536142af8) ok 122 - nextstate-COP=(0x562535a1de30) has a parent ok 123 - nextstate-COP=(0x562535a1de30) has the *right* parent B::LISTOP=SCALAR(0x562536142b88) ok 124 - padsv-OP=(0x562535a1e220) has a parent ok 125 - padsv-OP=(0x562535a1e220) has the *right* parent B::LISTOP=SCALAR(0x562536143110) ok 126 - unstack-OP=(0x562535a1ded0) has a parent ok 127 - unstack-OP=(0x562535a1ded0) has the *right* parent B::LISTOP=SCALAR(0x562536142960) ok 128 - leaveloop-BINOP=(0x562535a1df00) has a parent ok 129 - leaveloop-BINOP=(0x562535a1df00) has the *right* parent B::LISTOP=SCALAR(0x56253611ff10) ok 130 - enterloop-LOOP=(0x562535a1df40) has a parent ok 131 - enterloop-LOOP=(0x562535a1df40) has the *right* parent B::BINOP=SCALAR(0x562536142768) ok 132 - null-UNOP=(0x562535a1df98) has a parent ok 133 - null-UNOP=(0x562535a1df98) has the *right* parent B::BINOP=SCALAR(0x56253614dc20) ok 134 - and-LOGOP=(0x562535a1dfd0) has a parent ok 135 - and-LOGOP=(0x562535a1dfd0) has the *right* parent B::UNOP=SCALAR(0x56253614dda0) ok 136 - padsv-OP=(0x562535a1e1f0) has a parent ok 137 - padsv-OP=(0x562535a1e1f0) has the *right* parent B::LOGOP=SCALAR(0x56253614e298) ok 138 - lineseq-LISTOP=(0x562535a1e010) has a parent ok 139 - lineseq-LISTOP=(0x562535a1e010) has the *right* parent B::LOGOP=SCALAR(0x56253614e0b8) ok 140 - scope-LISTOP=(0x562535a1e080) has a parent ok 141 - scope-LISTOP=(0x562535a1e080) has the *right* parent B::LISTOP=SCALAR(0x562536142c18) ok 142 - null-COP=(0x562535a1e0c0) has a parent ok 143 - null-COP=(0x562535a1e0c0) has the *right* parent B::LISTOP=SCALAR(0x56253614dbf0) ok 144 - preinc-UNOP=(0x562535a1e120) has a parent ok 145 - preinc-UNOP=(0x562535a1e120) has the *right* parent B::LISTOP=SCALAR(0x5625361430f8) ok 146 - padsv-OP=(0x562535a1e158) has a parent ok 147 - padsv-OP=(0x562535a1e158) has the *right* parent B::UNOP=SCALAR(0x56253614e628) ok 148 - preinc-UNOP=(0x562535a1e188) has a parent ok 149 - preinc-UNOP=(0x562535a1e188) has the *right* parent B::LISTOP=SCALAR(0x5625361430f8) ok 150 - padsv-OP=(0x562535a1e1c0) has a parent ok 151 - padsv-OP=(0x562535a1e1c0) has the *right* parent B::UNOP=SCALAR(0x56253614e820) ok 152 - unstack-OP=(0x562535a1e050) has a parent ok 153 - unstack-OP=(0x562535a1e050) has the *right* parent B::LISTOP=SCALAR(0x5625361521a8) ok 154 - nextstate-COP=(0x562535a1db00) has a parent ok 155 - nextstate-COP=(0x562535a1db00) has the *right* parent B::LISTOP=SCALAR(0x56253614e628) ok 156 - leaveloop-BINOP=(0x562535a1db60) has a parent ok 157 - leaveloop-BINOP=(0x562535a1db60) has the *right* parent B::LISTOP=SCALAR(0x56253614e2e0) ok 158 - enteriter-LOOP=(0x562535a1dc88) has a parent ok 159 - enteriter-LOOP=(0x562535a1dc88) has the *right* parent B::BINOP=SCALAR(0x562536152028) ok 160 - null-OP=(0x562535a1dd20) has a parent ok 161 - null-OP=(0x562535a1dd20) has the *right* parent B::LOOP=SCALAR(0x56253614e988) ok 162 - null-UNOP=(0x562535a1dd50) has a parent ok 163 - null-UNOP=(0x562535a1dd50) has the *right* parent B::LOOP=SCALAR(0x562536151b18) ok 164 - pushmark-OP=(0x562535a1dd90) has a parent ok 165 - pushmark-OP=(0x562535a1dd90) has the *right* parent B::UNOP=SCALAR(0x56253614e628) ok 166 - const-SVOP=(0x562535a1ddf8) has a parent ok 167 - const-SVOP=(0x562535a1ddf8) has the *right* parent B::UNOP=SCALAR(0x562536151ef0) ok 168 - gv-PADOP=(0x562535a1ddc0) has a parent ok 169 - gv-PADOP=(0x562535a1ddc0) has the *right* parent B::LOOP=SCALAR(0x562536152610) ok 170 - null-UNOP=(0x562535a1dba0) has a parent ok 171 - null-UNOP=(0x562535a1dba0) has the *right* parent B::BINOP=SCALAR(0x562536151920) ok 172 - and-LOGOP=(0x562535a1dbd8) has a parent ok 173 - and-LOGOP=(0x562535a1dbd8) has the *right* parent B::UNOP=SCALAR(0x562536152358) ok 174 - iter-OP=(0x562535a1dce0) has a parent ok 175 - iter-OP=(0x562535a1dce0) has the *right* parent B::LOGOP=SCALAR(0x562536152268) ok 176 - lineseq-LISTOP=(0x562535a1dc18) has a parent ok 177 - lineseq-LISTOP=(0x562535a1dc18) has the *right* parent B::LOGOP=SCALAR(0x562536152178) ok 178 - null-OP=(0x562535a1de90) has a parent ok 179 - null-OP=(0x562535a1de90) has the *right* parent B::LISTOP=SCALAR(0x562536159068) ok 180 - unstack-OP=(0x562535a1dc58) has a parent ok 181 - unstack-OP=(0x562535a1dc58) has the *right* parent B::LISTOP=SCALAR(0x562536159068) ok t/utils/31oldname.t ................. skipped: No tests written yet. t/utils/32kids.t .................... skipped: No tests written yet. t/utils/33ancestors.t ............... skipped: No tests written yet. t/utils/34descendants.t ............. skipped: No tests written yet. t/utils/35siblings.t ................ skipped: No tests written yet. t/utils/36previous.t ................ skipped: No tests written yet. t/utils/37stringify.t ............... skipped: No tests written yet. t/utils/40walk.t .................... ok 1 - walkoptree_simple lines of t/utils/40walk.t ok 2 1..2 ok t/utils/41walkfilt.t ................ skipped: No tests written yet. t/utils/42all.t ..................... skipped: No tests written yet. t/utils/43allfilt.t ................. skipped: No tests written yet. t/utils/44optrep.t .................. skipped: No tests written yet. t/utils/50carp.t .................... skipped: No tests written yet. t/utils/51croak.t ................... skipped: No tests written yet. All tests successful. Files=21, Tests=210, 2 wallclock secs ( 0.09 usr 0.02 sys + 1.85 cusr 0.28 csys = 2.24 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libb-utils-perl/ make -j42 install DESTDIR=/build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/BUtils.h Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/Files.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/typemap Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/B/Utils/Utils.so Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/OP.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/share/man/man3/B::Utils::OP.3pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/share/man/man3/B::Utils.3pm make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libb-utils-perl' in '../libb-utils-perl_0.27-3_amd64.deb'. dpkg-deb: building package 'libb-utils-perl-dbgsym' in '../libb-utils-perl-dbgsym_0.27-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libb-utils-perl_0.27-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libb-utils-perl_0.27-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3538940 and its subdirectories I: Current time: Wed Dec 24 11:51:12 -12 2025 I: pbuilder-time-stamp: 1766620272 Thu Nov 21 17:28:14 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos11-amd64.debian.net. Thu Nov 21 17:28:14 UTC 2024 I: Preparing to do remote build '2' on ionos11-amd64.debian.net. Thu Nov 21 17:28:14 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos11-amd64.debian.net is marked as down. Thu Nov 21 17:28:14 UTC 2024 - checking via ssh if ionos11-amd64.debian.net is up. removed '/tmp/read-only-fs-test-pvRryf' ==================================================================================== Thu Nov 21 17:28:15 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos11-amd64, called using "2 libb-utils-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD 0.27-3" as arguments. Thu Nov 21 17:28:15 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-NijTkxwL" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 17:28:15 UTC 2024 I: Downloading source for trixie/libb-utils-perl=0.27-3 Reading package lists... NOTICE: 'libb-utils-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 80.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (dsc) [2294 B] Get:2 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (tar) [74.6 kB] Get:3 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (diff) [3760 B] Fetched 80.7 kB in 0s (1320 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libb-utils-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libb-utils-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 80.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (dsc) [2294 B] Get:2 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (tar) [74.6 kB] Get:3 http://deb.debian.org/debian trixie/main libb-utils-perl 0.27-3 (diff) [3760 B] Fetched 80.7 kB in 0s (1320 kB/s) Download complete and in download only mode ============================================================================= Re-Building libb-utils-perl in trixie on amd64 on ionos11-amd64 now. Date: Thu Nov 21 17:28:15 UTC 2024 Date UTC: Thu Nov 21 17:28:15 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_8qpm + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libb-utils-perl = debian-installer -o libb-utils-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libb-utils-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_8qpm --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2 --logfile b2/build.log libb-utils-perl_0.27-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Nov 22 07:28:16 +14 2024 I: pbuilder-time-stamp: 1732210096 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libb-utils-perl_0.27-3.dsc] I: copying [./libb-utils-perl_0.27.orig.tar.gz] I: copying [./libb-utils-perl_0.27-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Dec 21 20:24:26 2023 gpgv: using RSA key 8F91B227C7D6F2B1948C8236793CF67E8F0D11DA gpgv: issuer "emollier@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libb-utils-perl_0.27-3.dsc: no acceptable signature found dpkg-source: info: extracting libb-utils-perl in libb-utils-perl-0.27 dpkg-source: info: unpacking libb-utils-perl_0.27.orig.tar.gz dpkg-source: info: unpacking libb-utils-perl_0.27-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D01_modify_environment starting debug: Running on ionos11-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 21 17:28 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=97b525abd5c640d09c1f4435d9d3bb07 LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1730780 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_8qpm --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2 --logfile b2/build.log libb-utils-perl_0.27-3.dsc' SUDO_GID=111 SUDO_UID=106 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libextutils-depends-perl, libtask-weaken-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libextutils-depends-perl; however: Package libextutils-depends-perl is not installed. pbuilder-satisfydepends-dummy depends on libtask-weaken-perl; however: Package libtask-weaken-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libextutils-depends-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtask-weaken-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 21.0 MB of archives. After unpacking 81.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.0-7 [1112 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libtask-weaken-perl all 1.06-2 [9364 B] Fetched 21.0 MB in 1s (25.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libextutils-depends-perl. Preparing to unpack .../29-libextutils-depends-perl_0.8001-2_all.deb ... Unpacking libextutils-depends-perl (0.8001-2) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../30-libperl-dev_5.40.0-7_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.0-7) ... Selecting previously unselected package libtask-weaken-perl. Preparing to unpack .../31-libtask-weaken-perl_1.06-2_all.deb ... Unpacking libtask-weaken-perl (1.06-2) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libtask-weaken-perl (1.06-2) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libextutils-depends-perl (0.8001-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libb-utils-perl-0.27/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libb-utils-perl_0.27-3_source.changes dpkg-buildpackage: info: source package libb-utils-perl dpkg-buildpackage: info: source version 0.27-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Étienne Mollier dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for B::Utils Writing MYMETA.yml and MYMETA.json dh_auto_build make -j20 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' Running Mkbootstrap for Utils () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' Utils.xs > Utils.xsc "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' OP.xs > OP.xsc cp lib/B/Utils.pm blib/lib/B/Utils.pm cp BUtils.h blib/arch/B/Utils/Install/BUtils.h cp build/IFiles.pm blib/arch/B/Utils/Install/Files.pm cp lib/B/Utils/OP.pm blib/lib/B/Utils/OP.pm cp typemap blib/arch/B/Utils/Install/typemap chmod 644 "Utils.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 mv Utils.xsc Utils.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" Utils.c mv OP.xsc OP.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" OP.c rm -f blib/arch/auto/B/Utils/Utils.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Utils.o OP.o -o blib/arch/auto/B/Utils/Utils.so \ \ chmod 755 blib/arch/auto/B/Utils/Utils.so Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_auto_test make -j20 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/10use.t ........................... 1..2 ok 1 - use B::Utils; ok 2 - use B::Utils::OP; ok t/11export.t ........................ 1..12 ok 1 - Can import() ok 2 - Nothing is exported without asking ok 3 - All optional exports are exported via :all ok 4 - B::Utils exports all_starts ok 5 - B::Utils exports all_roots ok 6 - B::Utils exports anon_subs ok 7 - B::Utils exports recalc_sub_cache ok 8 - B::Utils exports walkoptree_simple ok 9 - B::Utils exports walkoptree_filtered ok 10 - B::Utils exports walkallops_simple ok 11 - B::Utils exports walkallops_filtered ok 12 - B::Utils->VERSION is specified ok t/regression_walkallops_filtered.t .. 1..3 ok 1 - defined &walkallops_filtered ok 2 - defined &opgrep ok 3 - Successfully called walkallops_filtered ok t/utils/20all_starts.t .............. 1..4 ok 1 - Found start ok 2 - Found correct start ok 3 - Found start ok 4 - Found correct start ok t/utils/21all_roots.t ............... 1..4 ok 1 - Found root ok 2 - Found correct root ok 3 - Found root ok 4 - Found correct root ok t/utils/22anon_subs.t ............... 1..2 ok 1 - Found correct anon sub ok 2 - Found correct anon sub ok t/utils/30parent.t .................. 1..181 ok 1 ok 2 - lineseq-LISTOP=(0x55e2a9022fe8) has a parent ok 3 - lineseq-LISTOP=(0x55e2a9022fe8) has the *right* parent B::UNOP=SCALAR(0x55e2a9826a20) ok 4 - nextstate-COP=(0x55e2a9023028) has a parent ok 5 - nextstate-COP=(0x55e2a9023028) has the *right* parent B::LISTOP=SCALAR(0x55e2a98313c0) ok 6 - null-UNOP=(0x55e2a9023088) has a parent ok 7 - null-UNOP=(0x55e2a9023088) has the *right* parent B::LISTOP=SCALAR(0x55e2a9833900) ok 8 - and-LOGOP=(0x55e2a90230c0) has a parent ok 9 - and-LOGOP=(0x55e2a90230c0) has the *right* parent B::UNOP=SCALAR(0x55e2a9843808) ok 10 - entersub-UNOP=(0x55e2a9022aa0) has a parent ok 11 - entersub-UNOP=(0x55e2a9022aa0) has the *right* parent B::LOGOP=SCALAR(0x55e2a9846b30) ok 12 - null-UNOP=(0x55e2a9023100) has a parent ok 13 - null-UNOP=(0x55e2a9023100) has the *right* parent B::UNOP=SCALAR(0x55e2a9833930) ok 14 - pushmark-OP=(0x55e2a9022b10) has a parent ok 15 - pushmark-OP=(0x55e2a9022b10) has the *right* parent B::UNOP=SCALAR(0x55e2a9833a38) ok 16 - null-UNOP=(0x55e2a9022ad8) has a parent ok 17 - null-UNOP=(0x55e2a9022ad8) has the *right* parent B::UNOP=SCALAR(0x55e2a98337f8) ok 18 - gv-PADOP=(0x55e2a9022b48) has a parent ok 19 - gv-PADOP=(0x55e2a9022b48) has the *right* parent B::UNOP=SCALAR(0x55e2a9834170) ok 20 - entersub-UNOP=(0x55e2a9022b80) has a parent ok 21 - entersub-UNOP=(0x55e2a9022b80) has the *right* parent B::LOGOP=SCALAR(0x55e2a9847508) ok 22 - null-UNOP=(0x55e2a9022bb8) has a parent ok 23 - null-UNOP=(0x55e2a9022bb8) has the *right* parent B::UNOP=SCALAR(0x55e2a9834398) ok 24 - pushmark-OP=(0x55e2a9022c30) has a parent ok 25 - pushmark-OP=(0x55e2a9022c30) has the *right* parent B::UNOP=SCALAR(0x55e2a98342a8) ok 26 - null-UNOP=(0x55e2a9022bf8) has a parent ok 27 - null-UNOP=(0x55e2a9022bf8) has the *right* parent B::UNOP=SCALAR(0x55e2a983ac58) ok 28 - gv-PADOP=(0x55e2a9022c68) has a parent ok 29 - gv-PADOP=(0x55e2a9022c68) has the *right* parent B::UNOP=SCALAR(0x55e2a98341e8) ok 30 - nextstate-COP=(0x55e2a913fa00) has a parent ok 31 - nextstate-COP=(0x55e2a913fa00) has the *right* parent B::LISTOP=SCALAR(0x55e2a983c300) ok 32 - leaveloop-BINOP=(0x55e2a913fa60) has a parent ok 33 - leaveloop-BINOP=(0x55e2a913fa60) has the *right* parent B::LISTOP=SCALAR(0x55e2a9833d38) ok 34 - enteriter-LOOP=(0x55e2a913fb88) has a parent ok 35 - enteriter-LOOP=(0x55e2a913fb88) has the *right* parent B::BINOP=SCALAR(0x55e2a9833ba0) ok 36 - null-OP=(0x55e2a913fc20) has a parent ok 37 - null-OP=(0x55e2a913fc20) has the *right* parent B::LOOP=SCALAR(0x55e2a983c438) ok 38 - null-UNOP=(0x55e2a913fc50) has a parent ok 39 - null-UNOP=(0x55e2a913fc50) has the *right* parent B::LOOP=SCALAR(0x55e2a983c3c0) ok 40 - pushmark-OP=(0x55e2a9022d40) has a parent ok 41 - pushmark-OP=(0x55e2a9022d40) has the *right* parent B::UNOP=SCALAR(0x55e2a983e470) ok 42 - entersub-UNOP=(0x55e2a9022da8) has a parent ok 43 - entersub-UNOP=(0x55e2a9022da8) has the *right* parent B::UNOP=SCALAR(0x55e2a9834398) ok 44 - null-UNOP=(0x55e2a9022de0) has a parent ok 45 - null-UNOP=(0x55e2a9022de0) has the *right* parent B::UNOP=SCALAR(0x55e2a983cab0) ok 46 - pushmark-OP=(0x55e2a9022e58) has a parent ok 47 - pushmark-OP=(0x55e2a9022e58) has the *right* parent B::UNOP=SCALAR(0x55e2a98412f8) ok 48 - null-UNOP=(0x55e2a9022e20) has a parent ok 49 - null-UNOP=(0x55e2a9022e20) has the *right* parent B::UNOP=SCALAR(0x55e2a983a5b0) ok 50 - gv-PADOP=(0x55e2a9022e90) has a parent ok 51 - gv-PADOP=(0x55e2a9022e90) has the *right* parent B::UNOP=SCALAR(0x55e2a983db28) ok 52 - gv-PADOP=(0x55e2a9022d70) has a parent ok 53 - gv-PADOP=(0x55e2a9022d70) has the *right* parent B::LOOP=SCALAR(0x55e2a9834398) ok 54 - null-UNOP=(0x55e2a913faa0) has a parent ok 55 - null-UNOP=(0x55e2a913faa0) has the *right* parent B::BINOP=SCALAR(0x55e2a9846e48) ok 56 - and-LOGOP=(0x55e2a913fad8) has a parent ok 57 - and-LOGOP=(0x55e2a913fad8) has the *right* parent B::UNOP=SCALAR(0x55e2a9843c70) ok 58 - iter-OP=(0x55e2a913fbe0) has a parent ok 59 - iter-OP=(0x55e2a913fbe0) has the *right* parent B::LOGOP=SCALAR(0x55e2a98471f0) ok 60 - lineseq-LISTOP=(0x55e2a913fb18) has a parent ok 61 - lineseq-LISTOP=(0x55e2a913fb18) has the *right* parent B::LOGOP=SCALAR(0x55e2a984c170) ok 62 - entersub-UNOP=(0x55e2a9022ec8) has a parent ok 63 - entersub-UNOP=(0x55e2a9022ec8) has the *right* parent B::LISTOP=SCALAR(0x55e2a9843da8) ok 64 - null-UNOP=(0x55e2a9022f00) has a parent ok 65 - null-UNOP=(0x55e2a9022f00) has the *right* parent B::UNOP=SCALAR(0x55e2a983e170) ok 66 - pushmark-OP=(0x55e2a9022f78) has a parent ok 67 - pushmark-OP=(0x55e2a9022f78) has the *right* parent B::UNOP=SCALAR(0x55e2a98515b0) ok 68 - null-UNOP=(0x55e2a9022f40) has a parent ok 69 - null-UNOP=(0x55e2a9022f40) has the *right* parent B::UNOP=SCALAR(0x55e2a983e140) ok 70 - gv-PADOP=(0x55e2a9022fb0) has a parent ok 71 - gv-PADOP=(0x55e2a9022fb0) has the *right* parent B::UNOP=SCALAR(0x55e2a9851508) ok 72 - unstack-OP=(0x55e2a913fb58) has a parent ok 73 - unstack-OP=(0x55e2a913fb58) has the *right* parent B::LISTOP=SCALAR(0x55e2a9846cf8) ok 74 - nextstate-COP=(0x55e2a913f8e8) has a parent ok 75 - nextstate-COP=(0x55e2a913f8e8) has the *right* parent B::LISTOP=SCALAR(0x55e2a98514c0) ok 76 - padsv_store-UNOP=(0x55e2a913f948) has a parent ok 77 - padsv_store-UNOP=(0x55e2a913f948) has the *right* parent B::LISTOP=SCALAR(0x55e2a984bfc0) ok 78 - const-SVOP=(0x55e2a913f988) has a parent ok 79 - const-SVOP=(0x55e2a913f988) has the *right* parent B::UNOP=SCALAR(0x55e2a984bfa8) ok 80 - null-OP=(0x55e2a913f9c0) has a parent ok 81 - null-OP=(0x55e2a913f9c0) has the *right* parent B::UNOP=SCALAR(0x55e2a984c8d8) ok 82 - nextstate-COP=(0x55e2a9134b30) has a parent ok 83 - nextstate-COP=(0x55e2a9134b30) has the *right* parent B::LISTOP=SCALAR(0x55e2a984bf48) ok 84 - leave-LISTOP=(0x55e2a913f4a0) has a parent ok 85 - leave-LISTOP=(0x55e2a913f4a0) has the *right* parent B::LISTOP=SCALAR(0x55e2a983c4c8) ok 86 - enter-OP=(0x55e2a913f4e0) has a parent ok 87 - enter-OP=(0x55e2a913f4e0) has the *right* parent B::LISTOP=SCALAR(0x55e2a98511f0) ok 88 - null-UNOP=(0x55e2a913f510) has a parent ok 89 - null-UNOP=(0x55e2a913f510) has the *right* parent B::LISTOP=SCALAR(0x55e2a9851658) ok 90 - and-LOGOP=(0x55e2a913f548) has a parent ok 91 - and-LOGOP=(0x55e2a913f548) has the *right* parent B::UNOP=SCALAR(0x55e2a9851b08) ok 92 - lt-BINOP=(0x55e2a913f5f8) has a parent ok 93 - lt-BINOP=(0x55e2a913f5f8) has the *right* parent B::LOGOP=SCALAR(0x55e2a98583d8) ok 94 - entersub-UNOP=(0x55e2a913f6a0) has a parent ok 95 - entersub-UNOP=(0x55e2a913f6a0) has the *right* parent B::BINOP=SCALAR(0x55e2a9851eb0) ok 96 - null-UNOP=(0x55e2a913f6d8) has a parent ok 97 - null-UNOP=(0x55e2a913f6d8) has the *right* parent B::UNOP=SCALAR(0x55e2a9846d10) ok 98 - pushmark-OP=(0x55e2a913f750) has a parent ok 99 - pushmark-OP=(0x55e2a913f750) has the *right* parent B::UNOP=SCALAR(0x55e2a9851f10) ok 100 - null-UNOP=(0x55e2a913f718) has a parent ok 101 - null-UNOP=(0x55e2a913f718) has the *right* parent B::UNOP=SCALAR(0x55e2a9851988) ok 102 - gv-PADOP=(0x55e2a913f788) has a parent ok 103 - gv-PADOP=(0x55e2a913f788) has the *right* parent B::UNOP=SCALAR(0x55e2a9833d38) ok 104 - predec-UNOP=(0x55e2a913f638) has a parent ok 105 - predec-UNOP=(0x55e2a913f638) has the *right* parent B::BINOP=SCALAR(0x55e2a98471a8) ok 106 - padsv-OP=(0x55e2a913f670) has a parent ok 107 - padsv-OP=(0x55e2a913f670) has the *right* parent B::UNOP=SCALAR(0x55e2a9858378) ok 108 - lineseq-LISTOP=(0x55e2a913f588) has a parent ok 109 - lineseq-LISTOP=(0x55e2a913f588) has the *right* parent B::LOGOP=SCALAR(0x55e2a9851f88) ok 110 - entersub-UNOP=(0x55e2a913f7c0) has a parent ok 111 - entersub-UNOP=(0x55e2a913f7c0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9851c10) ok 112 - null-UNOP=(0x55e2a913f7f8) has a parent ok 113 - null-UNOP=(0x55e2a913f7f8) has the *right* parent B::UNOP=SCALAR(0x55e2a9858078) ok 114 - pushmark-OP=(0x55e2a913f870) has a parent ok 115 - pushmark-OP=(0x55e2a913f870) has the *right* parent B::UNOP=SCALAR(0x55e2a9851580) ok 116 - null-UNOP=(0x55e2a913f838) has a parent ok 117 - null-UNOP=(0x55e2a913f838) has the *right* parent B::UNOP=SCALAR(0x55e2a984c188) ok 118 - gv-PADOP=(0x55e2a913f8a8) has a parent ok 119 - gv-PADOP=(0x55e2a913f8a8) has the *right* parent B::UNOP=SCALAR(0x55e2a9858870) ok 120 - unstack-OP=(0x55e2a913f5c8) has a parent ok 121 - unstack-OP=(0x55e2a913f5c8) has the *right* parent B::LISTOP=SCALAR(0x55e2a98589d8) ok 122 - nextstate-COP=(0x55e2a9134700) has a parent ok 123 - nextstate-COP=(0x55e2a9134700) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858528) ok 124 - padsv-OP=(0x55e2a9134af0) has a parent ok 125 - padsv-OP=(0x55e2a9134af0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9847178) ok 126 - unstack-OP=(0x55e2a91347a0) has a parent ok 127 - unstack-OP=(0x55e2a91347a0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858360) ok 128 - leaveloop-BINOP=(0x55e2a91347d0) has a parent ok 129 - leaveloop-BINOP=(0x55e2a91347d0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858780) ok 130 - enterloop-LOOP=(0x55e2a9134810) has a parent ok 131 - enterloop-LOOP=(0x55e2a9134810) has the *right* parent B::BINOP=SCALAR(0x55e2a9858978) ok 132 - null-UNOP=(0x55e2a9134868) has a parent ok 133 - null-UNOP=(0x55e2a9134868) has the *right* parent B::BINOP=SCALAR(0x55e2a98589f0) ok 134 - and-LOGOP=(0x55e2a91348a0) has a parent ok 135 - and-LOGOP=(0x55e2a91348a0) has the *right* parent B::UNOP=SCALAR(0x55e2a9858a68) ok 136 - padsv-OP=(0x55e2a9134ac0) has a parent ok 137 - padsv-OP=(0x55e2a9134ac0) has the *right* parent B::LOGOP=SCALAR(0x55e2a98624e8) ok 138 - lineseq-LISTOP=(0x55e2a91348e0) has a parent ok 139 - lineseq-LISTOP=(0x55e2a91348e0) has the *right* parent B::LOGOP=SCALAR(0x55e2a9862260) ok 140 - scope-LISTOP=(0x55e2a9134950) has a parent ok 141 - scope-LISTOP=(0x55e2a9134950) has the *right* parent B::LISTOP=SCALAR(0x55e2a9865798) ok 142 - null-COP=(0x55e2a9134990) has a parent ok 143 - null-COP=(0x55e2a9134990) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858558) ok 144 - preinc-UNOP=(0x55e2a91349f0) has a parent ok 145 - preinc-UNOP=(0x55e2a91349f0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862308) ok 146 - padsv-OP=(0x55e2a9134a28) has a parent ok 147 - padsv-OP=(0x55e2a9134a28) has the *right* parent B::UNOP=SCALAR(0x55e2a98629e0) ok 148 - preinc-UNOP=(0x55e2a9134a58) has a parent ok 149 - preinc-UNOP=(0x55e2a9134a58) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862308) ok 150 - padsv-OP=(0x55e2a9134a90) has a parent ok 151 - padsv-OP=(0x55e2a9134a90) has the *right* parent B::UNOP=SCALAR(0x55e2a9862578) ok 152 - unstack-OP=(0x55e2a9134920) has a parent ok 153 - unstack-OP=(0x55e2a9134920) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862890) ok 154 - nextstate-COP=(0x55e2a91343d0) has a parent ok 155 - nextstate-COP=(0x55e2a91343d0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862b78) ok 156 - leaveloop-BINOP=(0x55e2a9134430) has a parent ok 157 - leaveloop-BINOP=(0x55e2a9134430) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862a88) ok 158 - enteriter-LOOP=(0x55e2a9134558) has a parent ok 159 - enteriter-LOOP=(0x55e2a9134558) has the *right* parent B::BINOP=SCALAR(0x55e2a9861fa8) ok 160 - null-OP=(0x55e2a91345f0) has a parent ok 161 - null-OP=(0x55e2a91345f0) has the *right* parent B::LOOP=SCALAR(0x55e2a9865bd0) ok 162 - null-UNOP=(0x55e2a9134620) has a parent ok 163 - null-UNOP=(0x55e2a9134620) has the *right* parent B::LOOP=SCALAR(0x55e2a9858870) ok 164 - pushmark-OP=(0x55e2a9134660) has a parent ok 165 - pushmark-OP=(0x55e2a9134660) has the *right* parent B::UNOP=SCALAR(0x55e2a9865738) ok 166 - const-SVOP=(0x55e2a91346c8) has a parent ok 167 - const-SVOP=(0x55e2a91346c8) has the *right* parent B::UNOP=SCALAR(0x55e2a98662a8) ok 168 - gv-PADOP=(0x55e2a9134690) has a parent ok 169 - gv-PADOP=(0x55e2a9134690) has the *right* parent B::LOOP=SCALAR(0x55e2a9865eb8) ok 170 - null-UNOP=(0x55e2a9134470) has a parent ok 171 - null-UNOP=(0x55e2a9134470) has the *right* parent B::BINOP=SCALAR(0x55e2a9865900) ok 172 - and-LOGOP=(0x55e2a91344a8) has a parent ok 173 - and-LOGOP=(0x55e2a91344a8) has the *right* parent B::UNOP=SCALAR(0x55e2a98662a8) ok 174 - iter-OP=(0x55e2a91345b0) has a parent ok 175 - iter-OP=(0x55e2a91345b0) has the *right* parent B::LOGOP=SCALAR(0x55e2a986be00) ok 176 - lineseq-LISTOP=(0x55e2a91344e8) has a parent ok 177 - lineseq-LISTOP=(0x55e2a91344e8) has the *right* parent B::LOGOP=SCALAR(0x55e2a9865600) ok 178 - null-OP=(0x55e2a9134760) has a parent ok 179 - null-OP=(0x55e2a9134760) has the *right* parent B::LISTOP=SCALAR(0x55e2a986bab8) ok 180 - unstack-OP=(0x55e2a9134528) has a parent ok 181 - unstack-OP=(0x55e2a9134528) has the *right* parent B::LISTOP=SCALAR(0x55e2a986bab8) ok t/utils/31oldname.t ................. skipped: No tests written yet. t/utils/32kids.t .................... skipped: No tests written yet. t/utils/33ancestors.t ............... skipped: No tests written yet. t/utils/34descendants.t ............. skipped: No tests written yet. t/utils/35siblings.t ................ skipped: No tests written yet. t/utils/36previous.t ................ skipped: No tests written yet. t/utils/37stringify.t ............... skipped: No tests written yet. t/utils/40walk.t .................... ok 1 - walkoptree_simple lines of t/utils/40walk.t ok 2 1..2 ok t/utils/41walkfilt.t ................ skipped: No tests written yet. t/utils/42all.t ..................... skipped: No tests written yet. t/utils/43allfilt.t ................. skipped: No tests written yet. t/utils/44optrep.t .................. skipped: No tests written yet. t/utils/50carp.t .................... skipped: No tests written yet. t/utils/51croak.t ................... skipped: No tests written yet. All tests successful. Files=21, Tests=210, 10 wallclock secs ( 0.12 usr 0.07 sys + 4.90 cusr 0.45 csys = 5.54 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libb-utils-perl/ make -j20 install DESTDIR=/build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/Files.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/BUtils.h Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/typemap Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/B/Utils/Utils.so Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/OP.pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/share/man/man3/B::Utils::OP.3pm Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/share/man/man3/B::Utils.3pm make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libb-utils-perl-dbgsym' in '../libb-utils-perl-dbgsym_0.27-3_amd64.deb'. dpkg-deb: building package 'libb-utils-perl' in '../libb-utils-perl_0.27-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libb-utils-perl_0.27-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libb-utils-perl_0.27-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1730780 and its subdirectories I: Current time: Fri Nov 22 07:29:49 +14 2024 I: pbuilder-time-stamp: 1732210189 + false + set +x Thu Nov 21 17:29:49 UTC 2024 I: Signing ./b2/libb-utils-perl_0.27-3_amd64.buildinfo as libb-utils-perl_0.27-3_amd64.buildinfo.asc Thu Nov 21 17:29:49 UTC 2024 I: Signed ./b2/libb-utils-perl_0.27-3_amd64.buildinfo as ./b2/libb-utils-perl_0.27-3_amd64.buildinfo.asc Thu Nov 21 17:29:49 UTC 2024 - build #2 for libb-utils-perl/trixie/amd64 on ionos11-amd64 done. Starting cleanup. All cleanup done. Thu Nov 21 17:29:49 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-NijTkxwL, removing. /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD: total 56 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:28 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:29 b2 -rw-r--r-- 1 jenkins jenkins 2294 Dec 21 2023 libb-utils-perl_0.27-3.dsc -rw------- 1 jenkins jenkins 43232 Nov 21 17:28 rbuildlog.YXIDdUt /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1: total 140 -rw-r--r-- 1 jenkins jenkins 39500 Nov 21 17:28 build.log -rw-r--r-- 1 jenkins jenkins 34080 Nov 21 17:28 libb-utils-perl-dbgsym_0.27-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 3760 Nov 21 17:28 libb-utils-perl_0.27-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2294 Nov 21 17:28 libb-utils-perl_0.27-3.dsc -rw-r--r-- 1 jenkins jenkins 5116 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 5998 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1578 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 29496 Nov 21 17:28 libb-utils-perl_0.27-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 1418 Nov 21 17:28 libb-utils-perl_0.27-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2: total 144 -rw-r--r-- 1 jenkins jenkins 41420 Nov 21 17:29 build.log -rw-r--r-- 1 jenkins jenkins 34080 Nov 21 17:29 libb-utils-perl-dbgsym_0.27-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 3760 Nov 21 17:29 libb-utils-perl_0.27-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2294 Nov 21 17:29 libb-utils-perl_0.27-3.dsc -rw-r--r-- 1 jenkins jenkins 5107 Nov 21 17:29 libb-utils-perl_0.27-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 5989 Nov 21 17:29 libb-utils-perl_0.27-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1578 Nov 21 17:29 libb-utils-perl_0.27-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 29496 Nov 21 17:29 libb-utils-perl_0.27-3_amd64.deb -rw-r--r-- 1 jenkins jenkins 1418 Nov 21 17:29 libb-utils-perl_0.27-3_source.changes Thu Nov 21 17:29:51 UTC 2024 I: Deleting $TMPDIR on ionos11-amd64.debian.net. Thu Nov 21 17:29:52 UTC 2024 I: libb-utils-perl_0.27-3_amd64.changes: Format: 1.8 Date: Thu, 21 Dec 2023 21:20:59 +0100 Source: libb-utils-perl Binary: libb-utils-perl libb-utils-perl-dbgsym Architecture: amd64 Version: 0.27-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Étienne Mollier Description: libb-utils-perl - Perl module assisting with op tree manipulation Closes: 1045861 Changes: libb-utils-perl (0.27-3) unstable; urgency=medium . * Team upload. * d/clean: new: remove build/ directory. (Closes: #1045861) * Declare compliance with Debian Policy 4.6.2. * Set Rules-Requires-Root: no. * Enable all hardening flags. Checksums-Sha1: 3a7984f9d394c3cec1b170b5259d657847b07664 34080 libb-utils-perl-dbgsym_0.27-3_amd64.deb b04dc2331fad21e562fd1217d4575af242864499 5116 libb-utils-perl_0.27-3_amd64.buildinfo 496447862b463923d5ee95638fe657fb19f63ea2 29496 libb-utils-perl_0.27-3_amd64.deb Checksums-Sha256: b03d9fbc6607f591d75e150357f2f4a7c13a4204c5262c36ad1b2bd052fe771a 34080 libb-utils-perl-dbgsym_0.27-3_amd64.deb 3432f4f9f9799800fc5f6d2e3f817ecadaba1ff689bb49391a96bb83505c4978 5116 libb-utils-perl_0.27-3_amd64.buildinfo 88d511a35e4f47fb94c9020e571482ec579c5e50a17eb0f3fefa95c220d628de 29496 libb-utils-perl_0.27-3_amd64.deb Files: 58e13b9c2447934d3f356251e2d30da2 34080 debug optional libb-utils-perl-dbgsym_0.27-3_amd64.deb b0f8ad2362e8ce0bc41d3613dd415f06 5116 perl optional libb-utils-perl_0.27-3_amd64.buildinfo 5eac09cff692ecde4c6807261d8dcbdf 29496 perl optional libb-utils-perl_0.27-3_amd64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libb-utils-perl_0.27-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libb-utils-perl_0.27-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libb-utils-perl_0.27-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libb-utils-perl_0.27-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/amd64/libb-utils-perl_0.27-3_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libb-utils-perl_0.27-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-21 17:28:13.461676288 +0000 +++ b2/build.log 2024-11-21 17:29:51.621238674 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Wed Dec 24 11:50:34 -12 2025 -I: pbuilder-time-stamp: 1766620234 +I: Current time: Fri Nov 22 07:28:16 +14 2024 +I: pbuilder-time-stamp: 1732210096 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -26,52 +26,84 @@ dpkg-source: info: unpacking libb-utils-perl_0.27-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3538940/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D01_modify_environment starting +debug: Running on ionos11-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 21 17:28 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='amd64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='b78a8d26a86d44859a9fc5d9b9013f47' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3538940' - PS1='# ' - PS2='> ' + INVOCATION_ID=97b525abd5c640d09c1f4435d9d3bb07 + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1730780 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_M7oy --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1 --logfile b1/build.log libb-utils-perl_0.27-3.dsc' - SUDO_GID='110' - SUDO_UID='105' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/pbuilderrc_8qpm --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2 --logfile b2/build.log libb-utils-perl_0.27-3.dsc' + SUDO_GID=111 + SUDO_UID=106 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3538940/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -146,7 +178,7 @@ Get: 30 http://deb.debian.org/debian trixie/main amd64 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.0-7 [1112 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libtask-weaken-perl all 1.06-2 [9364 B] -Fetched 21.0 MB in 4s (4750 kB/s) +Fetched 21.0 MB in 1s (25.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) @@ -289,7 +321,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libb-utils-perl-0.27/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libb-utils-perl_0.27-3_source.changes +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libb-utils-perl-0.27/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libb-utils-perl_0.27-3_source.changes dpkg-buildpackage: info: source package libb-utils-perl dpkg-buildpackage: info: source version 0.27-3 dpkg-buildpackage: info: source distribution unstable @@ -311,18 +347,18 @@ Writing Makefile for B::Utils Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j42 + make -j20 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' Running Mkbootstrap for Utils () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' Utils.xs > Utils.xsc "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' -typemap '/build/reproducible-path/libb-utils-perl-0.27/typemap' OP.xs > OP.xsc -chmod 644 "Utils.bs" -"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 cp lib/B/Utils.pm blib/lib/B/Utils.pm -cp lib/B/Utils/OP.pm blib/lib/B/Utils/OP.pm +cp BUtils.h blib/arch/B/Utils/Install/BUtils.h cp build/IFiles.pm blib/arch/B/Utils/Install/Files.pm +cp lib/B/Utils/OP.pm blib/lib/B/Utils/OP.pm cp typemap blib/arch/B/Utils/Install/typemap -cp BUtils.h blib/arch/B/Utils/Install/BUtils.h +chmod 644 "Utils.bs" +"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 mv Utils.xsc Utils.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libb-utils-perl-0.27=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.27\" -DXS_VERSION=\"0.27\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" Utils.c mv OP.xsc OP.c @@ -335,7 +371,7 @@ Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' dh_auto_test - make -j42 test TEST_VERBOSE=1 + make -j20 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t @@ -387,186 +423,186 @@ t/utils/30parent.t .................. 1..181 ok 1 -ok 2 - lineseq-LISTOP=(0x56253590d338) has a parent -ok 3 - lineseq-LISTOP=(0x56253590d338) has the *right* parent B::UNOP=SCALAR(0x56253611dd08) -ok 4 - nextstate-COP=(0x56253590d378) has a parent -ok 5 - nextstate-COP=(0x56253590d378) has the *right* parent B::LISTOP=SCALAR(0x56253611cdf0) -ok 6 - null-UNOP=(0x56253590d3d8) has a parent -ok 7 - null-UNOP=(0x56253590d3d8) has the *right* parent B::LISTOP=SCALAR(0x56253611f490) -ok 8 - and-LOGOP=(0x56253590d410) has a parent -ok 9 - and-LOGOP=(0x56253590d410) has the *right* parent B::UNOP=SCALAR(0x56253612f378) -ok 10 - entersub-UNOP=(0x56253590cdf0) has a parent -ok 11 - entersub-UNOP=(0x56253590cdf0) has the *right* parent B::LOGOP=SCALAR(0x562536131e50) -ok 12 - null-UNOP=(0x56253590d450) has a parent -ok 13 - null-UNOP=(0x56253590d450) has the *right* parent B::UNOP=SCALAR(0x56253611f880) -ok 14 - pushmark-OP=(0x56253590ce60) has a parent -ok 15 - pushmark-OP=(0x56253590ce60) has the *right* parent B::UNOP=SCALAR(0x56253611fd18) -ok 16 - null-UNOP=(0x56253590ce28) has a parent -ok 17 - null-UNOP=(0x56253590ce28) has the *right* parent B::UNOP=SCALAR(0x56253611ff88) -ok 18 - gv-PADOP=(0x56253590ce98) has a parent -ok 19 - gv-PADOP=(0x56253590ce98) has the *right* parent B::UNOP=SCALAR(0x56253611f8c8) -ok 20 - entersub-UNOP=(0x56253590ced0) has a parent -ok 21 - entersub-UNOP=(0x56253590ced0) has the *right* parent B::LOGOP=SCALAR(0x562536132828) -ok 22 - null-UNOP=(0x56253590cf08) has a parent -ok 23 - null-UNOP=(0x56253590cf08) has the *right* parent B::UNOP=SCALAR(0x56253611f940) -ok 24 - pushmark-OP=(0x56253590cf80) has a parent -ok 25 - pushmark-OP=(0x56253590cf80) has the *right* parent B::UNOP=SCALAR(0x56253611f6b8) -ok 26 - null-UNOP=(0x56253590cf48) has a parent -ok 27 - null-UNOP=(0x56253590cf48) has the *right* parent B::UNOP=SCALAR(0x562536128848) -ok 28 - gv-PADOP=(0x56253590cfb8) has a parent -ok 29 - gv-PADOP=(0x56253590cfb8) has the *right* parent B::UNOP=SCALAR(0x562536126690) -ok 30 - nextstate-COP=(0x562535a29120) has a parent -ok 31 - nextstate-COP=(0x562535a29120) has the *right* parent B::LISTOP=SCALAR(0x562536128260) -ok 32 - leaveloop-BINOP=(0x562535a29180) has a parent -ok 33 - leaveloop-BINOP=(0x562535a29180) has the *right* parent B::LISTOP=SCALAR(0x56253611fb08) -ok 34 - enteriter-LOOP=(0x562535a292a8) has a parent -ok 35 - enteriter-LOOP=(0x562535a292a8) has the *right* parent B::BINOP=SCALAR(0x5625360af4f0) -ok 36 - null-OP=(0x562535a29340) has a parent -ok 37 - null-OP=(0x562535a29340) has the *right* parent B::LOOP=SCALAR(0x562536126090) -ok 38 - null-UNOP=(0x562535a29370) has a parent -ok 39 - null-UNOP=(0x562535a29370) has the *right* parent B::LOOP=SCALAR(0x56253611f808) -ok 40 - pushmark-OP=(0x56253590d090) has a parent -ok 41 - pushmark-OP=(0x56253590d090) has the *right* parent B::UNOP=SCALAR(0x56253612cdd8) -ok 42 - entersub-UNOP=(0x56253590d0f8) has a parent -ok 43 - entersub-UNOP=(0x56253590d0f8) has the *right* parent B::UNOP=SCALAR(0x562536126648) -ok 44 - null-UNOP=(0x56253590d130) has a parent -ok 45 - null-UNOP=(0x56253590d130) has the *right* parent B::UNOP=SCALAR(0x5625361284a0) -ok 46 - pushmark-OP=(0x56253590d1a8) has a parent -ok 47 - pushmark-OP=(0x56253590d1a8) has the *right* parent B::UNOP=SCALAR(0x56253612cb08) -ok 48 - null-UNOP=(0x56253590d170) has a parent -ok 49 - null-UNOP=(0x56253590d170) has the *right* parent B::UNOP=SCALAR(0x56253612f1f8) -ok 50 - gv-PADOP=(0x56253590d1e0) has a parent -ok 51 - gv-PADOP=(0x56253590d1e0) has the *right* parent B::UNOP=SCALAR(0x56253611f490) -ok 52 - gv-PADOP=(0x56253590d0c0) has a parent -ok 53 - gv-PADOP=(0x56253590d0c0) has the *right* parent B::LOOP=SCALAR(0x562536126648) -ok 54 - null-UNOP=(0x562535a291c0) has a parent -ok 55 - null-UNOP=(0x562535a291c0) has the *right* parent B::BINOP=SCALAR(0x56253612c358) -ok 56 - and-LOGOP=(0x562535a291f8) has a parent -ok 57 - and-LOGOP=(0x562535a291f8) has the *right* parent B::UNOP=SCALAR(0x56253612f228) -ok 58 - iter-OP=(0x562535a29300) has a parent -ok 59 - iter-OP=(0x562535a29300) has the *right* parent B::LOGOP=SCALAR(0x562536131a30) -ok 60 - lineseq-LISTOP=(0x562535a29238) has a parent -ok 61 - lineseq-LISTOP=(0x562535a29238) has the *right* parent B::LOGOP=SCALAR(0x56253612cdf0) -ok 62 - entersub-UNOP=(0x56253590d218) has a parent -ok 63 - entersub-UNOP=(0x56253590d218) has the *right* parent B::LISTOP=SCALAR(0x562536131ee0) -ok 64 - null-UNOP=(0x56253590d250) has a parent -ok 65 - null-UNOP=(0x56253590d250) has the *right* parent B::UNOP=SCALAR(0x562536132180) -ok 66 - pushmark-OP=(0x56253590d2c8) has a parent -ok 67 - pushmark-OP=(0x56253590d2c8) has the *right* parent B::UNOP=SCALAR(0x56253613c140) -ok 68 - null-UNOP=(0x56253590d290) has a parent -ok 69 - null-UNOP=(0x56253590d290) has the *right* parent B::UNOP=SCALAR(0x562536128278) -ok 70 - gv-PADOP=(0x56253590d300) has a parent -ok 71 - gv-PADOP=(0x56253590d300) has the *right* parent B::UNOP=SCALAR(0x562536137570) -ok 72 - unstack-OP=(0x562535a29278) has a parent -ok 73 - unstack-OP=(0x562535a29278) has the *right* parent B::LISTOP=SCALAR(0x562536132060) -ok 74 - nextstate-COP=(0x562535a29008) has a parent -ok 75 - nextstate-COP=(0x562535a29008) has the *right* parent B::LISTOP=SCALAR(0x562536137150) -ok 76 - padsv_store-UNOP=(0x562535a29068) has a parent -ok 77 - padsv_store-UNOP=(0x562535a29068) has the *right* parent B::LISTOP=SCALAR(0x56253612c2c8) -ok 78 - const-SVOP=(0x562535a290a8) has a parent -ok 79 - const-SVOP=(0x562535a290a8) has the *right* parent B::UNOP=SCALAR(0x562536136f70) -ok 80 - null-OP=(0x562535a290e0) has a parent -ok 81 - null-OP=(0x562535a290e0) has the *right* parent B::UNOP=SCALAR(0x56253612c460) -ok 82 - nextstate-COP=(0x562535a1e260) has a parent -ok 83 - nextstate-COP=(0x562535a1e260) has the *right* parent B::LISTOP=SCALAR(0x562536131e20) -ok 84 - leave-LISTOP=(0x562535a28bc0) has a parent -ok 85 - leave-LISTOP=(0x562535a28bc0) has the *right* parent B::LISTOP=SCALAR(0x56253613c3b0) -ok 86 - enter-OP=(0x562535a28c00) has a parent -ok 87 - enter-OP=(0x562535a28c00) has the *right* parent B::LISTOP=SCALAR(0x56253613bd80) -ok 88 - null-UNOP=(0x562535a28c30) has a parent -ok 89 - null-UNOP=(0x562535a28c30) has the *right* parent B::LISTOP=SCALAR(0x562536136eb0) -ok 90 - and-LOGOP=(0x562535a28c68) has a parent -ok 91 - and-LOGOP=(0x562535a28c68) has the *right* parent B::UNOP=SCALAR(0x562536132978) -ok 92 - lt-BINOP=(0x562535a28d18) has a parent -ok 93 - lt-BINOP=(0x562535a28d18) has the *right* parent B::LOGOP=SCALAR(0x5625361427f8) -ok 94 - entersub-UNOP=(0x562535a28dc0) has a parent -ok 95 - entersub-UNOP=(0x562535a28dc0) has the *right* parent B::BINOP=SCALAR(0x56253612fa80) -ok 96 - null-UNOP=(0x562535a28df8) has a parent -ok 97 - null-UNOP=(0x562535a28df8) has the *right* parent B::UNOP=SCALAR(0x56253613c4b8) -ok 98 - pushmark-OP=(0x562535a28e70) has a parent -ok 99 - pushmark-OP=(0x562535a28e70) has the *right* parent B::UNOP=SCALAR(0x562536137768) -ok 100 - null-UNOP=(0x562535a28e38) has a parent -ok 101 - null-UNOP=(0x562535a28e38) has the *right* parent B::UNOP=SCALAR(0x562536142a80) -ok 102 - gv-PADOP=(0x562535a28ea8) has a parent -ok 103 - gv-PADOP=(0x562535a28ea8) has the *right* parent B::UNOP=SCALAR(0x56253613c290) -ok 104 - predec-UNOP=(0x562535a28d58) has a parent -ok 105 - predec-UNOP=(0x562535a28d58) has the *right* parent B::BINOP=SCALAR(0x56253613c458) -ok 106 - padsv-OP=(0x562535a28d90) has a parent -ok 107 - padsv-OP=(0x562535a28d90) has the *right* parent B::UNOP=SCALAR(0x562536142ff0) -ok 108 - lineseq-LISTOP=(0x562535a28ca8) has a parent -ok 109 - lineseq-LISTOP=(0x562535a28ca8) has the *right* parent B::LOGOP=SCALAR(0x5625361431d0) -ok 110 - entersub-UNOP=(0x562535a28ee0) has a parent -ok 111 - entersub-UNOP=(0x562535a28ee0) has the *right* parent B::LISTOP=SCALAR(0x562536142a08) -ok 112 - null-UNOP=(0x562535a28f18) has a parent -ok 113 - null-UNOP=(0x562535a28f18) has the *right* parent B::UNOP=SCALAR(0x5625361370c0) -ok 114 - pushmark-OP=(0x562535a28f90) has a parent -ok 115 - pushmark-OP=(0x562535a28f90) has the *right* parent B::UNOP=SCALAR(0x56253613cb60) -ok 116 - null-UNOP=(0x562535a28f58) has a parent -ok 117 - null-UNOP=(0x562535a28f58) has the *right* parent B::UNOP=SCALAR(0x562536142fd8) -ok 118 - gv-PADOP=(0x562535a28fc8) has a parent -ok 119 - gv-PADOP=(0x562535a28fc8) has the *right* parent B::UNOP=SCALAR(0x562536142648) -ok 120 - unstack-OP=(0x562535a28ce8) has a parent -ok 121 - unstack-OP=(0x562535a28ce8) has the *right* parent B::LISTOP=SCALAR(0x562536142af8) -ok 122 - nextstate-COP=(0x562535a1de30) has a parent -ok 123 - nextstate-COP=(0x562535a1de30) has the *right* parent B::LISTOP=SCALAR(0x562536142b88) -ok 124 - padsv-OP=(0x562535a1e220) has a parent -ok 125 - padsv-OP=(0x562535a1e220) has the *right* parent B::LISTOP=SCALAR(0x562536143110) -ok 126 - unstack-OP=(0x562535a1ded0) has a parent -ok 127 - unstack-OP=(0x562535a1ded0) has the *right* parent B::LISTOP=SCALAR(0x562536142960) -ok 128 - leaveloop-BINOP=(0x562535a1df00) has a parent -ok 129 - leaveloop-BINOP=(0x562535a1df00) has the *right* parent B::LISTOP=SCALAR(0x56253611ff10) -ok 130 - enterloop-LOOP=(0x562535a1df40) has a parent -ok 131 - enterloop-LOOP=(0x562535a1df40) has the *right* parent B::BINOP=SCALAR(0x562536142768) -ok 132 - null-UNOP=(0x562535a1df98) has a parent -ok 133 - null-UNOP=(0x562535a1df98) has the *right* parent B::BINOP=SCALAR(0x56253614dc20) -ok 134 - and-LOGOP=(0x562535a1dfd0) has a parent -ok 135 - and-LOGOP=(0x562535a1dfd0) has the *right* parent B::UNOP=SCALAR(0x56253614dda0) -ok 136 - padsv-OP=(0x562535a1e1f0) has a parent -ok 137 - padsv-OP=(0x562535a1e1f0) has the *right* parent B::LOGOP=SCALAR(0x56253614e298) -ok 138 - lineseq-LISTOP=(0x562535a1e010) has a parent -ok 139 - lineseq-LISTOP=(0x562535a1e010) has the *right* parent B::LOGOP=SCALAR(0x56253614e0b8) -ok 140 - scope-LISTOP=(0x562535a1e080) has a parent -ok 141 - scope-LISTOP=(0x562535a1e080) has the *right* parent B::LISTOP=SCALAR(0x562536142c18) -ok 142 - null-COP=(0x562535a1e0c0) has a parent -ok 143 - null-COP=(0x562535a1e0c0) has the *right* parent B::LISTOP=SCALAR(0x56253614dbf0) -ok 144 - preinc-UNOP=(0x562535a1e120) has a parent -ok 145 - preinc-UNOP=(0x562535a1e120) has the *right* parent B::LISTOP=SCALAR(0x5625361430f8) -ok 146 - padsv-OP=(0x562535a1e158) has a parent -ok 147 - padsv-OP=(0x562535a1e158) has the *right* parent B::UNOP=SCALAR(0x56253614e628) -ok 148 - preinc-UNOP=(0x562535a1e188) has a parent -ok 149 - preinc-UNOP=(0x562535a1e188) has the *right* parent B::LISTOP=SCALAR(0x5625361430f8) -ok 150 - padsv-OP=(0x562535a1e1c0) has a parent -ok 151 - padsv-OP=(0x562535a1e1c0) has the *right* parent B::UNOP=SCALAR(0x56253614e820) -ok 152 - unstack-OP=(0x562535a1e050) has a parent -ok 153 - unstack-OP=(0x562535a1e050) has the *right* parent B::LISTOP=SCALAR(0x5625361521a8) -ok 154 - nextstate-COP=(0x562535a1db00) has a parent -ok 155 - nextstate-COP=(0x562535a1db00) has the *right* parent B::LISTOP=SCALAR(0x56253614e628) -ok 156 - leaveloop-BINOP=(0x562535a1db60) has a parent -ok 157 - leaveloop-BINOP=(0x562535a1db60) has the *right* parent B::LISTOP=SCALAR(0x56253614e2e0) -ok 158 - enteriter-LOOP=(0x562535a1dc88) has a parent -ok 159 - enteriter-LOOP=(0x562535a1dc88) has the *right* parent B::BINOP=SCALAR(0x562536152028) -ok 160 - null-OP=(0x562535a1dd20) has a parent -ok 161 - null-OP=(0x562535a1dd20) has the *right* parent B::LOOP=SCALAR(0x56253614e988) -ok 162 - null-UNOP=(0x562535a1dd50) has a parent -ok 163 - null-UNOP=(0x562535a1dd50) has the *right* parent B::LOOP=SCALAR(0x562536151b18) -ok 164 - pushmark-OP=(0x562535a1dd90) has a parent -ok 165 - pushmark-OP=(0x562535a1dd90) has the *right* parent B::UNOP=SCALAR(0x56253614e628) -ok 166 - const-SVOP=(0x562535a1ddf8) has a parent -ok 167 - const-SVOP=(0x562535a1ddf8) has the *right* parent B::UNOP=SCALAR(0x562536151ef0) -ok 168 - gv-PADOP=(0x562535a1ddc0) has a parent -ok 169 - gv-PADOP=(0x562535a1ddc0) has the *right* parent B::LOOP=SCALAR(0x562536152610) -ok 170 - null-UNOP=(0x562535a1dba0) has a parent -ok 171 - null-UNOP=(0x562535a1dba0) has the *right* parent B::BINOP=SCALAR(0x562536151920) -ok 172 - and-LOGOP=(0x562535a1dbd8) has a parent -ok 173 - and-LOGOP=(0x562535a1dbd8) has the *right* parent B::UNOP=SCALAR(0x562536152358) -ok 174 - iter-OP=(0x562535a1dce0) has a parent -ok 175 - iter-OP=(0x562535a1dce0) has the *right* parent B::LOGOP=SCALAR(0x562536152268) -ok 176 - lineseq-LISTOP=(0x562535a1dc18) has a parent -ok 177 - lineseq-LISTOP=(0x562535a1dc18) has the *right* parent B::LOGOP=SCALAR(0x562536152178) -ok 178 - null-OP=(0x562535a1de90) has a parent -ok 179 - null-OP=(0x562535a1de90) has the *right* parent B::LISTOP=SCALAR(0x562536159068) -ok 180 - unstack-OP=(0x562535a1dc58) has a parent -ok 181 - unstack-OP=(0x562535a1dc58) has the *right* parent B::LISTOP=SCALAR(0x562536159068) +ok 2 - lineseq-LISTOP=(0x55e2a9022fe8) has a parent +ok 3 - lineseq-LISTOP=(0x55e2a9022fe8) has the *right* parent B::UNOP=SCALAR(0x55e2a9826a20) +ok 4 - nextstate-COP=(0x55e2a9023028) has a parent +ok 5 - nextstate-COP=(0x55e2a9023028) has the *right* parent B::LISTOP=SCALAR(0x55e2a98313c0) +ok 6 - null-UNOP=(0x55e2a9023088) has a parent +ok 7 - null-UNOP=(0x55e2a9023088) has the *right* parent B::LISTOP=SCALAR(0x55e2a9833900) +ok 8 - and-LOGOP=(0x55e2a90230c0) has a parent +ok 9 - and-LOGOP=(0x55e2a90230c0) has the *right* parent B::UNOP=SCALAR(0x55e2a9843808) +ok 10 - entersub-UNOP=(0x55e2a9022aa0) has a parent +ok 11 - entersub-UNOP=(0x55e2a9022aa0) has the *right* parent B::LOGOP=SCALAR(0x55e2a9846b30) +ok 12 - null-UNOP=(0x55e2a9023100) has a parent +ok 13 - null-UNOP=(0x55e2a9023100) has the *right* parent B::UNOP=SCALAR(0x55e2a9833930) +ok 14 - pushmark-OP=(0x55e2a9022b10) has a parent +ok 15 - pushmark-OP=(0x55e2a9022b10) has the *right* parent B::UNOP=SCALAR(0x55e2a9833a38) +ok 16 - null-UNOP=(0x55e2a9022ad8) has a parent +ok 17 - null-UNOP=(0x55e2a9022ad8) has the *right* parent B::UNOP=SCALAR(0x55e2a98337f8) +ok 18 - gv-PADOP=(0x55e2a9022b48) has a parent +ok 19 - gv-PADOP=(0x55e2a9022b48) has the *right* parent B::UNOP=SCALAR(0x55e2a9834170) +ok 20 - entersub-UNOP=(0x55e2a9022b80) has a parent +ok 21 - entersub-UNOP=(0x55e2a9022b80) has the *right* parent B::LOGOP=SCALAR(0x55e2a9847508) +ok 22 - null-UNOP=(0x55e2a9022bb8) has a parent +ok 23 - null-UNOP=(0x55e2a9022bb8) has the *right* parent B::UNOP=SCALAR(0x55e2a9834398) +ok 24 - pushmark-OP=(0x55e2a9022c30) has a parent +ok 25 - pushmark-OP=(0x55e2a9022c30) has the *right* parent B::UNOP=SCALAR(0x55e2a98342a8) +ok 26 - null-UNOP=(0x55e2a9022bf8) has a parent +ok 27 - null-UNOP=(0x55e2a9022bf8) has the *right* parent B::UNOP=SCALAR(0x55e2a983ac58) +ok 28 - gv-PADOP=(0x55e2a9022c68) has a parent +ok 29 - gv-PADOP=(0x55e2a9022c68) has the *right* parent B::UNOP=SCALAR(0x55e2a98341e8) +ok 30 - nextstate-COP=(0x55e2a913fa00) has a parent +ok 31 - nextstate-COP=(0x55e2a913fa00) has the *right* parent B::LISTOP=SCALAR(0x55e2a983c300) +ok 32 - leaveloop-BINOP=(0x55e2a913fa60) has a parent +ok 33 - leaveloop-BINOP=(0x55e2a913fa60) has the *right* parent B::LISTOP=SCALAR(0x55e2a9833d38) +ok 34 - enteriter-LOOP=(0x55e2a913fb88) has a parent +ok 35 - enteriter-LOOP=(0x55e2a913fb88) has the *right* parent B::BINOP=SCALAR(0x55e2a9833ba0) +ok 36 - null-OP=(0x55e2a913fc20) has a parent +ok 37 - null-OP=(0x55e2a913fc20) has the *right* parent B::LOOP=SCALAR(0x55e2a983c438) +ok 38 - null-UNOP=(0x55e2a913fc50) has a parent +ok 39 - null-UNOP=(0x55e2a913fc50) has the *right* parent B::LOOP=SCALAR(0x55e2a983c3c0) +ok 40 - pushmark-OP=(0x55e2a9022d40) has a parent +ok 41 - pushmark-OP=(0x55e2a9022d40) has the *right* parent B::UNOP=SCALAR(0x55e2a983e470) +ok 42 - entersub-UNOP=(0x55e2a9022da8) has a parent +ok 43 - entersub-UNOP=(0x55e2a9022da8) has the *right* parent B::UNOP=SCALAR(0x55e2a9834398) +ok 44 - null-UNOP=(0x55e2a9022de0) has a parent +ok 45 - null-UNOP=(0x55e2a9022de0) has the *right* parent B::UNOP=SCALAR(0x55e2a983cab0) +ok 46 - pushmark-OP=(0x55e2a9022e58) has a parent +ok 47 - pushmark-OP=(0x55e2a9022e58) has the *right* parent B::UNOP=SCALAR(0x55e2a98412f8) +ok 48 - null-UNOP=(0x55e2a9022e20) has a parent +ok 49 - null-UNOP=(0x55e2a9022e20) has the *right* parent B::UNOP=SCALAR(0x55e2a983a5b0) +ok 50 - gv-PADOP=(0x55e2a9022e90) has a parent +ok 51 - gv-PADOP=(0x55e2a9022e90) has the *right* parent B::UNOP=SCALAR(0x55e2a983db28) +ok 52 - gv-PADOP=(0x55e2a9022d70) has a parent +ok 53 - gv-PADOP=(0x55e2a9022d70) has the *right* parent B::LOOP=SCALAR(0x55e2a9834398) +ok 54 - null-UNOP=(0x55e2a913faa0) has a parent +ok 55 - null-UNOP=(0x55e2a913faa0) has the *right* parent B::BINOP=SCALAR(0x55e2a9846e48) +ok 56 - and-LOGOP=(0x55e2a913fad8) has a parent +ok 57 - and-LOGOP=(0x55e2a913fad8) has the *right* parent B::UNOP=SCALAR(0x55e2a9843c70) +ok 58 - iter-OP=(0x55e2a913fbe0) has a parent +ok 59 - iter-OP=(0x55e2a913fbe0) has the *right* parent B::LOGOP=SCALAR(0x55e2a98471f0) +ok 60 - lineseq-LISTOP=(0x55e2a913fb18) has a parent +ok 61 - lineseq-LISTOP=(0x55e2a913fb18) has the *right* parent B::LOGOP=SCALAR(0x55e2a984c170) +ok 62 - entersub-UNOP=(0x55e2a9022ec8) has a parent +ok 63 - entersub-UNOP=(0x55e2a9022ec8) has the *right* parent B::LISTOP=SCALAR(0x55e2a9843da8) +ok 64 - null-UNOP=(0x55e2a9022f00) has a parent +ok 65 - null-UNOP=(0x55e2a9022f00) has the *right* parent B::UNOP=SCALAR(0x55e2a983e170) +ok 66 - pushmark-OP=(0x55e2a9022f78) has a parent +ok 67 - pushmark-OP=(0x55e2a9022f78) has the *right* parent B::UNOP=SCALAR(0x55e2a98515b0) +ok 68 - null-UNOP=(0x55e2a9022f40) has a parent +ok 69 - null-UNOP=(0x55e2a9022f40) has the *right* parent B::UNOP=SCALAR(0x55e2a983e140) +ok 70 - gv-PADOP=(0x55e2a9022fb0) has a parent +ok 71 - gv-PADOP=(0x55e2a9022fb0) has the *right* parent B::UNOP=SCALAR(0x55e2a9851508) +ok 72 - unstack-OP=(0x55e2a913fb58) has a parent +ok 73 - unstack-OP=(0x55e2a913fb58) has the *right* parent B::LISTOP=SCALAR(0x55e2a9846cf8) +ok 74 - nextstate-COP=(0x55e2a913f8e8) has a parent +ok 75 - nextstate-COP=(0x55e2a913f8e8) has the *right* parent B::LISTOP=SCALAR(0x55e2a98514c0) +ok 76 - padsv_store-UNOP=(0x55e2a913f948) has a parent +ok 77 - padsv_store-UNOP=(0x55e2a913f948) has the *right* parent B::LISTOP=SCALAR(0x55e2a984bfc0) +ok 78 - const-SVOP=(0x55e2a913f988) has a parent +ok 79 - const-SVOP=(0x55e2a913f988) has the *right* parent B::UNOP=SCALAR(0x55e2a984bfa8) +ok 80 - null-OP=(0x55e2a913f9c0) has a parent +ok 81 - null-OP=(0x55e2a913f9c0) has the *right* parent B::UNOP=SCALAR(0x55e2a984c8d8) +ok 82 - nextstate-COP=(0x55e2a9134b30) has a parent +ok 83 - nextstate-COP=(0x55e2a9134b30) has the *right* parent B::LISTOP=SCALAR(0x55e2a984bf48) +ok 84 - leave-LISTOP=(0x55e2a913f4a0) has a parent +ok 85 - leave-LISTOP=(0x55e2a913f4a0) has the *right* parent B::LISTOP=SCALAR(0x55e2a983c4c8) +ok 86 - enter-OP=(0x55e2a913f4e0) has a parent +ok 87 - enter-OP=(0x55e2a913f4e0) has the *right* parent B::LISTOP=SCALAR(0x55e2a98511f0) +ok 88 - null-UNOP=(0x55e2a913f510) has a parent +ok 89 - null-UNOP=(0x55e2a913f510) has the *right* parent B::LISTOP=SCALAR(0x55e2a9851658) +ok 90 - and-LOGOP=(0x55e2a913f548) has a parent +ok 91 - and-LOGOP=(0x55e2a913f548) has the *right* parent B::UNOP=SCALAR(0x55e2a9851b08) +ok 92 - lt-BINOP=(0x55e2a913f5f8) has a parent +ok 93 - lt-BINOP=(0x55e2a913f5f8) has the *right* parent B::LOGOP=SCALAR(0x55e2a98583d8) +ok 94 - entersub-UNOP=(0x55e2a913f6a0) has a parent +ok 95 - entersub-UNOP=(0x55e2a913f6a0) has the *right* parent B::BINOP=SCALAR(0x55e2a9851eb0) +ok 96 - null-UNOP=(0x55e2a913f6d8) has a parent +ok 97 - null-UNOP=(0x55e2a913f6d8) has the *right* parent B::UNOP=SCALAR(0x55e2a9846d10) +ok 98 - pushmark-OP=(0x55e2a913f750) has a parent +ok 99 - pushmark-OP=(0x55e2a913f750) has the *right* parent B::UNOP=SCALAR(0x55e2a9851f10) +ok 100 - null-UNOP=(0x55e2a913f718) has a parent +ok 101 - null-UNOP=(0x55e2a913f718) has the *right* parent B::UNOP=SCALAR(0x55e2a9851988) +ok 102 - gv-PADOP=(0x55e2a913f788) has a parent +ok 103 - gv-PADOP=(0x55e2a913f788) has the *right* parent B::UNOP=SCALAR(0x55e2a9833d38) +ok 104 - predec-UNOP=(0x55e2a913f638) has a parent +ok 105 - predec-UNOP=(0x55e2a913f638) has the *right* parent B::BINOP=SCALAR(0x55e2a98471a8) +ok 106 - padsv-OP=(0x55e2a913f670) has a parent +ok 107 - padsv-OP=(0x55e2a913f670) has the *right* parent B::UNOP=SCALAR(0x55e2a9858378) +ok 108 - lineseq-LISTOP=(0x55e2a913f588) has a parent +ok 109 - lineseq-LISTOP=(0x55e2a913f588) has the *right* parent B::LOGOP=SCALAR(0x55e2a9851f88) +ok 110 - entersub-UNOP=(0x55e2a913f7c0) has a parent +ok 111 - entersub-UNOP=(0x55e2a913f7c0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9851c10) +ok 112 - null-UNOP=(0x55e2a913f7f8) has a parent +ok 113 - null-UNOP=(0x55e2a913f7f8) has the *right* parent B::UNOP=SCALAR(0x55e2a9858078) +ok 114 - pushmark-OP=(0x55e2a913f870) has a parent +ok 115 - pushmark-OP=(0x55e2a913f870) has the *right* parent B::UNOP=SCALAR(0x55e2a9851580) +ok 116 - null-UNOP=(0x55e2a913f838) has a parent +ok 117 - null-UNOP=(0x55e2a913f838) has the *right* parent B::UNOP=SCALAR(0x55e2a984c188) +ok 118 - gv-PADOP=(0x55e2a913f8a8) has a parent +ok 119 - gv-PADOP=(0x55e2a913f8a8) has the *right* parent B::UNOP=SCALAR(0x55e2a9858870) +ok 120 - unstack-OP=(0x55e2a913f5c8) has a parent +ok 121 - unstack-OP=(0x55e2a913f5c8) has the *right* parent B::LISTOP=SCALAR(0x55e2a98589d8) +ok 122 - nextstate-COP=(0x55e2a9134700) has a parent +ok 123 - nextstate-COP=(0x55e2a9134700) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858528) +ok 124 - padsv-OP=(0x55e2a9134af0) has a parent +ok 125 - padsv-OP=(0x55e2a9134af0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9847178) +ok 126 - unstack-OP=(0x55e2a91347a0) has a parent +ok 127 - unstack-OP=(0x55e2a91347a0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858360) +ok 128 - leaveloop-BINOP=(0x55e2a91347d0) has a parent +ok 129 - leaveloop-BINOP=(0x55e2a91347d0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858780) +ok 130 - enterloop-LOOP=(0x55e2a9134810) has a parent +ok 131 - enterloop-LOOP=(0x55e2a9134810) has the *right* parent B::BINOP=SCALAR(0x55e2a9858978) +ok 132 - null-UNOP=(0x55e2a9134868) has a parent +ok 133 - null-UNOP=(0x55e2a9134868) has the *right* parent B::BINOP=SCALAR(0x55e2a98589f0) +ok 134 - and-LOGOP=(0x55e2a91348a0) has a parent +ok 135 - and-LOGOP=(0x55e2a91348a0) has the *right* parent B::UNOP=SCALAR(0x55e2a9858a68) +ok 136 - padsv-OP=(0x55e2a9134ac0) has a parent +ok 137 - padsv-OP=(0x55e2a9134ac0) has the *right* parent B::LOGOP=SCALAR(0x55e2a98624e8) +ok 138 - lineseq-LISTOP=(0x55e2a91348e0) has a parent +ok 139 - lineseq-LISTOP=(0x55e2a91348e0) has the *right* parent B::LOGOP=SCALAR(0x55e2a9862260) +ok 140 - scope-LISTOP=(0x55e2a9134950) has a parent +ok 141 - scope-LISTOP=(0x55e2a9134950) has the *right* parent B::LISTOP=SCALAR(0x55e2a9865798) +ok 142 - null-COP=(0x55e2a9134990) has a parent +ok 143 - null-COP=(0x55e2a9134990) has the *right* parent B::LISTOP=SCALAR(0x55e2a9858558) +ok 144 - preinc-UNOP=(0x55e2a91349f0) has a parent +ok 145 - preinc-UNOP=(0x55e2a91349f0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862308) +ok 146 - padsv-OP=(0x55e2a9134a28) has a parent +ok 147 - padsv-OP=(0x55e2a9134a28) has the *right* parent B::UNOP=SCALAR(0x55e2a98629e0) +ok 148 - preinc-UNOP=(0x55e2a9134a58) has a parent +ok 149 - preinc-UNOP=(0x55e2a9134a58) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862308) +ok 150 - padsv-OP=(0x55e2a9134a90) has a parent +ok 151 - padsv-OP=(0x55e2a9134a90) has the *right* parent B::UNOP=SCALAR(0x55e2a9862578) +ok 152 - unstack-OP=(0x55e2a9134920) has a parent +ok 153 - unstack-OP=(0x55e2a9134920) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862890) +ok 154 - nextstate-COP=(0x55e2a91343d0) has a parent +ok 155 - nextstate-COP=(0x55e2a91343d0) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862b78) +ok 156 - leaveloop-BINOP=(0x55e2a9134430) has a parent +ok 157 - leaveloop-BINOP=(0x55e2a9134430) has the *right* parent B::LISTOP=SCALAR(0x55e2a9862a88) +ok 158 - enteriter-LOOP=(0x55e2a9134558) has a parent +ok 159 - enteriter-LOOP=(0x55e2a9134558) has the *right* parent B::BINOP=SCALAR(0x55e2a9861fa8) +ok 160 - null-OP=(0x55e2a91345f0) has a parent +ok 161 - null-OP=(0x55e2a91345f0) has the *right* parent B::LOOP=SCALAR(0x55e2a9865bd0) +ok 162 - null-UNOP=(0x55e2a9134620) has a parent +ok 163 - null-UNOP=(0x55e2a9134620) has the *right* parent B::LOOP=SCALAR(0x55e2a9858870) +ok 164 - pushmark-OP=(0x55e2a9134660) has a parent +ok 165 - pushmark-OP=(0x55e2a9134660) has the *right* parent B::UNOP=SCALAR(0x55e2a9865738) +ok 166 - const-SVOP=(0x55e2a91346c8) has a parent +ok 167 - const-SVOP=(0x55e2a91346c8) has the *right* parent B::UNOP=SCALAR(0x55e2a98662a8) +ok 168 - gv-PADOP=(0x55e2a9134690) has a parent +ok 169 - gv-PADOP=(0x55e2a9134690) has the *right* parent B::LOOP=SCALAR(0x55e2a9865eb8) +ok 170 - null-UNOP=(0x55e2a9134470) has a parent +ok 171 - null-UNOP=(0x55e2a9134470) has the *right* parent B::BINOP=SCALAR(0x55e2a9865900) +ok 172 - and-LOGOP=(0x55e2a91344a8) has a parent +ok 173 - and-LOGOP=(0x55e2a91344a8) has the *right* parent B::UNOP=SCALAR(0x55e2a98662a8) +ok 174 - iter-OP=(0x55e2a91345b0) has a parent +ok 175 - iter-OP=(0x55e2a91345b0) has the *right* parent B::LOGOP=SCALAR(0x55e2a986be00) +ok 176 - lineseq-LISTOP=(0x55e2a91344e8) has a parent +ok 177 - lineseq-LISTOP=(0x55e2a91344e8) has the *right* parent B::LOGOP=SCALAR(0x55e2a9865600) +ok 178 - null-OP=(0x55e2a9134760) has a parent +ok 179 - null-OP=(0x55e2a9134760) has the *right* parent B::LISTOP=SCALAR(0x55e2a986bab8) +ok 180 - unstack-OP=(0x55e2a9134528) has a parent +ok 181 - unstack-OP=(0x55e2a9134528) has the *right* parent B::LISTOP=SCALAR(0x55e2a986bab8) ok t/utils/31oldname.t ................. skipped: No tests written yet. t/utils/32kids.t .................... skipped: No tests written yet. @@ -587,19 +623,19 @@ t/utils/50carp.t .................... skipped: No tests written yet. t/utils/51croak.t ................... skipped: No tests written yet. All tests successful. -Files=21, Tests=210, 2 wallclock secs ( 0.09 usr 0.02 sys + 1.85 cusr 0.28 csys = 2.24 CPU) +Files=21, Tests=210, 10 wallclock secs ( 0.12 usr 0.07 sys + 4.90 cusr 0.45 csys = 5.54 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libb-utils-perl-0.27' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libb-utils-perl/ - make -j42 install DESTDIR=/build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j20 install DESTDIR=/build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libb-utils-perl-0.27' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Utils.bs blib/arch/auto/B/Utils/Utils.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree -Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/BUtils.h Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/Files.pm +Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/BUtils.h Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils/Install/typemap Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/B/Utils/Utils.so Installing /build/reproducible-path/libb-utils-perl-0.27/debian/libb-utils-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/B/Utils.pm @@ -628,8 +664,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libb-utils-perl' in '../libb-utils-perl_0.27-3_amd64.deb'. dpkg-deb: building package 'libb-utils-perl-dbgsym' in '../libb-utils-perl-dbgsym_0.27-3_amd64.deb'. +dpkg-deb: building package 'libb-utils-perl' in '../libb-utils-perl_0.27-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libb-utils-perl_0.27-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libb-utils-perl_0.27-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -637,12 +673,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1730780/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3538940 and its subdirectories -I: Current time: Wed Dec 24 11:51:12 -12 2025 -I: pbuilder-time-stamp: 1766620272 +I: removing directory /srv/workspace/pbuilder/1730780 and its subdirectories +I: Current time: Fri Nov 22 07:29:49 +14 2024 +I: pbuilder-time-stamp: 1732210189 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libb-utils-perl_0.27-3.diff: 80.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libb-utils-perl_0.27-3.diff.gz b2/build.log: 78.4% -- replaced with stdout Compressing the 1st log... b1/build.log: 78.9% -- replaced with stdout Thu Nov 21 17:29:53 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libb-utils-perl_trixie_amd64_1732210193 + touch /var/log/reproducible-builds/diffoscope_stamp_libb-utils-perl_trixie_amd64_1732210193 + RESULT=0 + systemd-run '--description=diffoscope on libb-utils-perl/0.27-3 in trixie/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_14-24286 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD --run-session -c jenkins-reproducible-trixie-diffoscope-09871547-2c12-4209-b132-4f1717a8e571 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/dbd-tmp-kucDHBj ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/libb-utils-perl_0.27-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/libb-utils-perl_0.27-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/libb-utils-perl_0.27-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1/libb-utils-perl_0.27-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2/libb-utils-perl_0.27-3_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_14-24286.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/libb-utils-perl_0.27-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/libb-utils-perl_0.27-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/libb-utils-perl_0.27-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b1/libb-utils-perl_0.27-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.2Ig3RVrD/b2/libb-utils-perl_0.27-3_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.347s) 0.347s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 658ms CPU time consumed: 659ms _ _ _ _ _ _ _ _ | (_) |__ | |__ _ _| |_(_) |___ _ __ ___ _ __| | | | | '_ \| '_ \ _____| | | | __| | / __|_____| '_ \ / _ \ '__| | | | | |_) | |_) |_____| |_| | |_| | \__ \_____| |_) | __/ | | | |_|_|_.__/|_.__/ \__,_|\__|_|_|___/ | .__/ \___|_| |_| |_| Thu Nov 21 17:29:54 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Thu Nov 21 17:29:54 UTC 2024 I: libb-utils-perl from trixie built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-21 17:29:55] INFO: Starting at 2024-11-21 17:29:55.309683 [2024-11-21 17:29:55] INFO: Generating the pages of 1 package(s) [2024-11-21 17:29:55] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/amd64/libb-utils-perl didn't produce a buildlog, even though it has been built. [2024-11-21 17:29:55] INFO: Finished at 2024-11-21 17:29:55.748270, took: 0:00:00.438594 Thu Nov 21 17:29:55 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/amd64/libb-utils-perl.html Thu Nov 21 17:29:55 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Nov 21 17:29:55 UTC 2024 I: Submitting 8.0K b1/libb-utils-perl_0.27-3_amd64.buildinfo.asc https://buildinfo.debian.net/b04dc2331fad21e562fd1217d4575af242864499/libb-utils-perl_0.27-3_amd64 Thu Nov 21 17:29:56 UTC 2024 I: Submitting 8.0K b2/libb-utils-perl_0.27-3_amd64.buildinfo.asc https://buildinfo.debian.net/fa803fe2d5bd3b2346d6587aa7f665fcbbf4ed5c/libb-utils-perl_0.27-3_amd64 Thu Nov 21 17:29:57 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Nov 21 17:29:57 UTC 2024 I: Done submitting .buildinfo files. Thu Nov 21 17:29:57 UTC 2024 I: Removing signed libb-utils-perl_0.27-3_amd64.buildinfo.asc files: removed './b1/libb-utils-perl_0.27-3_amd64.buildinfo.asc' removed './b2/libb-utils-perl_0.27-3_amd64.buildinfo.asc' 1732210197 amd64 trixie libb-utils-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libb-utils-perl_0.27-3.rbuild.log: 75.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libb-utils-perl_0.27-3.rbuild.log.gz [2024-11-21 17:29:57] INFO: Starting at 2024-11-21 17:29:57.597857 [2024-11-21 17:29:57] INFO: Generating the pages of 1 package(s) [2024-11-21 17:29:58] INFO: Finished at 2024-11-21 17:29:58.053395, took: 0:00:00.455544 All cleanup done. Thu Nov 21 17:29:58 UTC 2024 - total duration: 0h 2m 36s. Thu Nov 21 17:29:58 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-MhPMcjdl, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 39.274s CPU time consumed: 7.059s