Running as unit: rb-build-amd64_18-23305.service ==================================================================================== Thu Nov 21 02:46:56 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_18) on jenkins, called using "ionos5-amd64 ionos1-amd64" as arguments. Thu Nov 21 02:46:56 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-X9xe3kYX" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 02:46:56 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos5-amd64.debian.net is marked as down. Thu Nov 21 02:46:56 UTC 2024 - checking via ssh if ionos5-amd64.debian.net is up. removed '/tmp/read-only-fs-test-QyOHsT' Thu Nov 21 02:46:57 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Thu Nov 21 02:46:57 UTC 2024 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-3JilUW' ok, let's check if libanyevent-aggressiveidle-perl is building anywhere yet… ok, libanyevent-aggressiveidle-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libanyevent-aggressiveidle-perl in trixie on amd64 on jenkins now. 1st build will be done on ionos5-amd64.debian.net. 2nd build will be done on ionos1-amd64.debian.net. ============================================================================= Thu Nov 21 02:47:02 UTC 2024 I: starting to build libanyevent-aggressiveidle-perl/trixie/amd64 on jenkins on '2024-11-21 02:46' Thu Nov 21 02:47:02 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_18/23305/console.log 1732157222 amd64 trixie libanyevent-aggressiveidle-perl Thu Nov 21 02:47:02 UTC 2024 I: Downloading source for trixie/libanyevent-aggressiveidle-perl=0.04-1.1 --2024-11-21 02:47:03-- http://deb.debian.org/debian/pool/main/liba/libanyevent-aggressiveidle-perl/libanyevent-aggressiveidle-perl_0.04-1.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2021 (2.0K) [text/prs.lines.tag] Saving to: ‘libanyevent-aggressiveidle-perl_0.04-1.1.dsc’ 0K . 100% 217M=0s 2024-11-21 02:47:03 (217 MB/s) - ‘libanyevent-aggressiveidle-perl_0.04-1.1.dsc’ saved [2021/2021] --2024-11-21 02:47:03-- http://deb.debian.org/debian/pool/main/liba/libanyevent-aggressiveidle-perl/libanyevent-aggressiveidle-perl_0.04-1.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2021 (2.0K) [text/prs.lines.tag] Saving to: ‘libanyevent-aggressiveidle-perl_0.04-1.1.dsc’ 0K . 100% 217M=0s 2024-11-21 02:47:03 (217 MB/s) - ‘libanyevent-aggressiveidle-perl_0.04-1.1.dsc’ saved [2021/2021] Thu Nov 21 02:47:03 UTC 2024 I: libanyevent-aggressiveidle-perl_0.04-1.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libanyevent-aggressiveidle-perl Binary: libanyevent-aggressiveidle-perl Architecture: all Version: 0.04-1.1 Maintainer: Dmitry E. Oboukhov Homepage: http://search.cpan.org/~unera/AnyEvent-AggressiveIdle/ Standards-Version: 3.9.1 Vcs-Browser: http://git.uvw.ru/?p=anyevent-aggressiveidle;a=summary Build-Depends: debhelper (>= 7), cdbs, libanyevent-perl Package-List: libanyevent-aggressiveidle-perl deb perl extra arch=all Checksums-Sha1: b62e85d40108403a1012657bd859d6a015598df3 3978 libanyevent-aggressiveidle-perl_0.04.orig.tar.gz 31aca9662f3b57c93e0231d9234ca2bbe91412ac 1832 libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz Checksums-Sha256: 7a09a852d7901081d75474ab169ca500a1f912d8326ec5f807838b8e630d3f47 3978 libanyevent-aggressiveidle-perl_0.04.orig.tar.gz 97c9bcd958c8f54d8fa09cb94656469b25d37a98dd4d7cca33c4d61edf1faa4d 1832 libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz Files: 63ce40c2bbb22075aed9857df315bada 3978 libanyevent-aggressiveidle-perl_0.04.orig.tar.gz 149eb5ea2a8406de5390bfb35ef17af8 1832 libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEuL9UE3sJ01zwJv6dCRq4VgaaqhwFAl/2JxYACgkQCRq4Vgaa qhxMOBAAjHNqRmN8BF+rVgoinV9PfhD4iSa0enVqOZwzb+WyCg7mTix8jTPkKFgE o0NBMS4PczJZf/jc/p7T8GLzn2dMLpYwTG4NpYrcjytIFKQPL0Wc0abk7bEcjH4E zjvbaT8S3WugQ5NO1VAGc4PNlqB+1HGbJXq3k8uZZLTTzBvNoOcHPUDP8mObKcy9 R1lYIxHY33c4w+pcvMyLAKQyn94+WH2efUfPm8ulsQn6PF0r/j02Njy8BbwRaIrT 7AhIyy+BevRrGw2mzQcu59pKhzlD0lsAVpyRYLgwd6hvS2b2dr3WnP/EEqwQqX/P wVbGJr+BDxaAQJnb6VOkyV4GCBS95ghsDsQ0DwfCt2/Ek1D9/i9iuFMNmkepn9V4 /dlsX9M9RGxNFr2oI1+VcmNOFkddtoZrjviohQtBAAzAOJTyJBTz18akofDXRsC5 x7+OkRQBCFmpy5Ny09QcCtA0k6GQdbmmnrvPtbqkunXmztrDh95ko/hDscFt3iDA e9yOiPJmfmNXstJYLEP1vFwBiLeOI+kGG/h1JCUlzexg56McXOPBZ7CmqfjXKBoB Y4FDlD3aLQH56YZyQ8L7hGmmbbxFL4aEuS/XHsSMIeE+HmDQnrHwiTBfmZe4zKCq AYEkHAhtKTNkXkMKL/ef4G8uBt/yFAS1LmatSQGD674WaTBpOtM= =5a7s -----END PGP SIGNATURE----- Thu Nov 21 02:47:03 UTC 2024 I: Checking whether the package is not for us Thu Nov 21 02:47:03 UTC 2024 I: Starting 1st build on remote node ionos5-amd64.debian.net. Thu Nov 21 02:47:03 UTC 2024 I: Preparing to do remote build '1' on ionos5-amd64.debian.net. Thu Nov 21 02:47:03 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos5-amd64.debian.net is marked as down. Thu Nov 21 02:47:03 UTC 2024 - checking via ssh if ionos5-amd64.debian.net is up. removed '/tmp/read-only-fs-test-mEDCSO' ==================================================================================== Wed Dec 24 09:10:04 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos5-amd64, called using "1 libanyevent-aggressiveidle-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R 0.04-1.1" as arguments. Wed Dec 24 09:10:04 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-7YeCK8mt" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Dec 24 09:10:04 UTC 2025 I: Downloading source for trixie/libanyevent-aggressiveidle-perl=0.04-1.1 Reading package lists... Need to get 7831 B of source archives. Get:1 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (dsc) [2021 B] Get:2 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (tar) [3978 B] Get:3 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (diff) [1832 B] Fetched 7831 B in 0s (732 kB/s) Download complete and in download only mode Reading package lists... Need to get 7831 B of source archives. Get:1 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (dsc) [2021 B] Get:2 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (tar) [3978 B] Get:3 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (diff) [1832 B] Fetched 7831 B in 0s (732 kB/s) Download complete and in download only mode ============================================================================= Building libanyevent-aggressiveidle-perl in trixie on amd64 on ionos5-amd64 now. Date: Wed Dec 24 09:10:04 UTC 2025 Date UTC: Wed Dec 24 09:10:04 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue Dec 23 21:10:04 -12 2025 I: pbuilder-time-stamp: 1766567404 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libanyevent-aggressiveidle-perl_0.04-1.1.dsc] I: copying [./libanyevent-aggressiveidle-perl_0.04.orig.tar.gz] I: copying [./libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Jan 6 21:09:42 2021 gpgv: using RSA key B8BF54137B09D35CF026FE9D091AB856069AAA1C gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libanyevent-aggressiveidle-perl_0.04-1.1.dsc: no acceptable signature found dpkg-source: info: extracting libanyevent-aggressiveidle-perl in libanyevent-aggressiveidle-perl-0.04 dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04.orig.tar.gz dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3277413/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='f7b0a23b44ef465e86e2e235cf4818e0' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3277413' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_hy8S --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1 --logfile b1/build.log libanyevent-aggressiveidle-perl_0.04-1.1.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3277413/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7), cdbs, libanyevent-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-minimal{a} python3-scour{a} python3.12{a} python3.12-minimal{a} readline-common{a} scour{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libasync-interrupt-perl libev-perl libevent-perl libguard-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 55 newly installed, 0 to remove and 0 not upgraded. Need to get 27.4 MB of archives. After unpacking 106 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 libpython3.12-minimal amd64 3.12.7-3 [815 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.4-1 [106 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 python3.12-minimal amd64 3.12.7-3 [2162 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 python3-minimal amd64 3.12.6-1 [26.7 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 tzdata all 2024b-3 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 libkrb5support0 amd64 1.21.3-3 [32.5 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libcom-err2 amd64 1.47.1-1+b1 [23.2 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 libk5crypto3 amd64 1.21.3-3 [79.9 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 libkeyutils1 amd64 1.6.3-4 [9092 B] Get: 12 http://deb.debian.org/debian trixie/main amd64 libkrb5-3 amd64 1.21.3-3 [324 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 libgssapi-krb5-2 amd64 1.21.3-3 [136 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 libtirpc3t64 amd64 1.3.4+ds-1.3+b1 [83.1 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libnsl2 amd64 1.3.0-3+b3 [40.6 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 readline-common all 8.2-5 [69.3 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 libreadline8t64 amd64 8.2-5 [169 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libpython3.12-stdlib amd64 3.12.7-3 [1966 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 python3.12 amd64 3.12.7-3 [671 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 libpython3-stdlib amd64 3.12.6-1 [9692 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 python3 amd64 3.12.6-1 [27.8 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 python3-scour all 0.38.2-5 [55.7 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 scour all 0.38.2-5 [16.3 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 cdbs all 0.4.166 [47.3 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 47 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 51 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libanyevent-perl amd64 7.170-2+b6 [384 kB] Fetched 27.4 MB in 0s (87.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.7-3_amd64.deb ... Unpacking libpython3.12-minimal:amd64 (3.12.7-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.6.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_amd64.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:amd64 (3.12.7-3) ... Setting up libexpat1:amd64 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20289 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_amd64.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../04-libkrb5support0_1.21.3-3_amd64.deb ... Unpacking libkrb5support0:amd64 (1.21.3-3) ... Selecting previously unselected package libcom-err2:amd64. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../06-libk5crypto3_1.21.3-3_amd64.deb ... Unpacking libk5crypto3:amd64 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../07-libkeyutils1_1.6.3-4_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../08-libkrb5-3_1.21.3-3_amd64.deb ... Unpacking libkrb5-3:amd64 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:amd64. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libtirpc.so.3 to /lib/x86_64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/x86_64-linux-gnu/libtirpc.so.3.0.0 to /lib/x86_64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:amd64 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:amd64. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_amd64.deb ... Unpacking libnsl2:amd64 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../14-libreadline8t64_8.2-5_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:amd64. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_amd64.deb ... Unpacking libpython3.12-stdlib:amd64 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_amd64.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21351 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.6-1_amd64.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../09-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package python3-scour. Preparing to unpack .../16-python3-scour_0.38.2-5_all.deb ... Unpacking python3-scour (0.38.2-5) ... Selecting previously unselected package scour. Preparing to unpack .../17-scour_0.38.2-5_all.deb ... Unpacking scour (0.38.2-5) ... Selecting previously unselected package cdbs. Preparing to unpack .../18-cdbs_0.4.166_all.deb ... Unpacking cdbs (0.4.166) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../19-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../20-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../21-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../22-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../25-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../27-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../33-libanyevent-perl_7.170-2+b6_amd64.deb ... Unpacking libanyevent-perl (7.170-2+b6) ... Setting up media-types (10.1.0) ... Setting up libanyevent-perl (7.170-2+b6) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libkeyutils1:amd64 (1.6.3-4) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:amd64 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libkrb5support0:amd64 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Dec 24 09:12:48 UTC 2025. Universal Time is now: Wed Dec 24 09:12:48 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up libk5crypto3:amd64 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libkrb5-3:amd64 (1.21.3-3) ... Setting up readline-common (8.2-5) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:amd64 (1.21.3-3) ... Setting up libreadline8t64:amd64 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtirpc3t64:amd64 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:amd64 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:amd64 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libpython3-stdlib:amd64 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-scour (0.38.2-5) ... Setting up scour (0.38.2-5) ... Setting up cdbs (0.4.166) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libanyevent-aggressiveidle-perl_0.04-1.1_source.changes dpkg-buildpackage: info: source package libanyevent-aggressiveidle-perl dpkg-buildpackage: info: source version 0.04-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Holger Levsen dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) rm -f Makefile.old debian/rules build test -x debian/rules mkdir -p "." cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for AnyEvent::AggressiveIdle Writing MYMETA.yml and MYMETA.json /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/AnyEvent chmod 755 blib/lib/AnyEvent touch blib/lib/AnyEvent/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/AnyEvent/AggressiveIdle chmod 755 blib/lib/auto/AnyEvent/AggressiveIdle touch blib/lib/auto/AnyEvent/AggressiveIdle/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/AnyEvent/AggressiveIdle chmod 755 blib/arch/auto/AnyEvent/AggressiveIdle touch blib/arch/auto/AnyEvent/AggressiveIdle/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'lib/AnyEvent/AggressiveIdle.pm' 'blib/lib/AnyEvent/AggressiveIdle.pm' cp lib/AnyEvent/AggressiveIdle.pm blib/lib/AnyEvent/AggressiveIdle.pm touch pm_to_blib true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/AnyEvent/AggressiveIdle.pm blib/man3/AnyEvent::AggressiveIdle.3pm Manifying 1 pod document true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' true true true true true true true true PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_base.t .... 1..6 ok 1 - use AnyEvent; ok 2 - use AnyEvent::AggressiveIdle; ok 3 - aggressive_idle works fine ok 4 - aggressive_idle blocks AE::idle ok 5 - Breaking idle process ok 6 - Breaknig inside idle process ok t/02_guards.t .. 1..6 ok 1 - use AnyEvent; ok 2 - use AnyEvent::AggressiveIdle; ok 3 - Two aggressive_idle counters are equal ok 4 - Timer works properly ok 5 - Subroutine was called 10 times ok 6 - Idle process was called 10 or 11 times ok All tests successful. Files=2, Tests=12, 3 wallclock secs ( 0.03 usr 0.00 sys + 2.00 cusr 0.19 csys = 2.22 CPU) Result: PASS true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-check fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) mkdir -p "." /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl" make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' true true true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/AnyEvent/AggressiveIdle.pm blib/man3/AnyEvent::AggressiveIdle.3pm Manifying 1 pod document true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/perl5" \ "blib/arch" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/lib/x86_64-linux-gnu/perl5/5.40" \ "blib/bin" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/bin" \ "blib/script" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/bin" \ "blib/man1" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man1" \ "blib/man3" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man3" Installing /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/perl5/AnyEvent/AggressiveIdle.pm Installing /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man3/AnyEvent::AggressiveIdle.3pm true true true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libanyevent-aggressiveidle-perl.substvars dh_installdirs -plibanyevent-aggressiveidle-perl \ dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdocs -plibanyevent-aggressiveidle-perl ./README dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installexamples -plibanyevent-aggressiveidle-perl dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installman -plibanyevent-aggressiveidle-perl dh_installman: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installinfo -plibanyevent-aggressiveidle-perl dh_installinfo: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installmenu -plibanyevent-aggressiveidle-perl dh_installmenu: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installcron -plibanyevent-aggressiveidle-perl dh_installcron: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_systemd_enable -plibanyevent-aggressiveidle-perl dh_systemd_enable: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installinit -plibanyevent-aggressiveidle-perl dh_installinit: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdebconf -plibanyevent-aggressiveidle-perl dh_installdebconf: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installemacsen -plibanyevent-aggressiveidle-perl dh_installemacsen: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installcatalogs -plibanyevent-aggressiveidle-perl dh_installcatalogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installpam -plibanyevent-aggressiveidle-perl dh_installpam: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installlogrotate -plibanyevent-aggressiveidle-perl dh_installlogrotate: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installlogcheck -plibanyevent-aggressiveidle-perl dh_installlogcheck: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installchangelogs -plibanyevent-aggressiveidle-perl ./Changes dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installudev -plibanyevent-aggressiveidle-perl dh_installudev: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_lintian -plibanyevent-aggressiveidle-perl dh_lintian: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_bugfiles -plibanyevent-aggressiveidle-perl dh_bugfiles: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_install -plibanyevent-aggressiveidle-perl dh_install: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_systemd_start -plibanyevent-aggressiveidle-perl dh_systemd_start: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_link -plibanyevent-aggressiveidle-perl dh_link: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installmime -plibanyevent-aggressiveidle-perl dh_installmime: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installgsettings -plibanyevent-aggressiveidle-perl dh_installgsettings: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip -plibanyevent-aggressiveidle-perl dh_strip: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip_nondeterminism -plibanyevent-aggressiveidle-perl dh_compress -plibanyevent-aggressiveidle-perl dh_compress: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_fixperms -plibanyevent-aggressiveidle-perl dh_makeshlibs -plibanyevent-aggressiveidle-perl dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdeb -plibanyevent-aggressiveidle-perl dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_perl -plibanyevent-aggressiveidle-perl dh_shlibdeps -plibanyevent-aggressiveidle-perl dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_gencontrol -plibanyevent-aggressiveidle-perl dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 7 in use) # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibanyevent-aggressiveidle-perl ; fi dh_md5sums -plibanyevent-aggressiveidle-perl dh_builddeb -plibanyevent-aggressiveidle-perl dpkg-deb: building package 'libanyevent-aggressiveidle-perl' in '../libanyevent-aggressiveidle-perl_0.04-1.1_all.deb'. dpkg-genbuildinfo --build=binary -O../libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo dpkg-genchanges --build=binary -O../libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3277413 and its subdirectories I: Current time: Tue Dec 23 21:13:05 -12 2025 I: pbuilder-time-stamp: 1766567585 Wed Dec 24 09:13:05 UTC 2025 I: Signing ./b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo as libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc Wed Dec 24 09:13:05 UTC 2025 I: Signed ./b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo as ./b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc Wed Dec 24 09:13:05 UTC 2025 - build #1 for libanyevent-aggressiveidle-perl/trixie/amd64 on ionos5-amd64 done. Starting cleanup. All cleanup done. Wed Dec 24 09:13:05 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-7YeCK8mt, removing. /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 02:50 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 02:47 b2 -rw-r--r-- 1 jenkins jenkins 2021 Jan 6 2021 libanyevent-aggressiveidle-perl_0.04-1.1.dsc -rw------- 1 jenkins jenkins 3293 Nov 21 02:47 rbuildlog.7tXxjAR /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1: total 80 -rw-r--r-- 1 jenkins jenkins 40638 Nov 21 02:50 build.log -rw-r--r-- 1 jenkins jenkins 1832 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2021 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1.dsc -rw-r--r-- 1 jenkins jenkins 6644 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_all.deb -rw-r--r-- 1 jenkins jenkins 5619 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6501 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1298 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes -rw-r--r-- 1 jenkins jenkins 1494 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2: total 0 Thu Nov 21 02:50:06 UTC 2024 I: Deleting $TMPDIR on ionos5-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Dec 23 21:10:04 -12 2025 I: pbuilder-time-stamp: 1766567404 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libanyevent-aggressiveidle-perl_0.04-1.1.dsc] I: copying [./libanyevent-aggressiveidle-perl_0.04.orig.tar.gz] I: copying [./libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Jan 6 21:09:42 2021 gpgv: using RSA key B8BF54137B09D35CF026FE9D091AB856069AAA1C gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libanyevent-aggressiveidle-perl_0.04-1.1.dsc: no acceptable signature found dpkg-source: info: extracting libanyevent-aggressiveidle-perl in libanyevent-aggressiveidle-perl-0.04 dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04.orig.tar.gz dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3277413/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='f7b0a23b44ef465e86e2e235cf4818e0' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3277413' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_hy8S --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1 --logfile b1/build.log libanyevent-aggressiveidle-perl_0.04-1.1.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3277413/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7), cdbs, libanyevent-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-minimal{a} python3-scour{a} python3.12{a} python3.12-minimal{a} readline-common{a} scour{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libasync-interrupt-perl libev-perl libevent-perl libguard-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 55 newly installed, 0 to remove and 0 not upgraded. Need to get 27.4 MB of archives. After unpacking 106 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 libpython3.12-minimal amd64 3.12.7-3 [815 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.4-1 [106 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 python3.12-minimal amd64 3.12.7-3 [2162 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 python3-minimal amd64 3.12.6-1 [26.7 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 tzdata all 2024b-3 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 libkrb5support0 amd64 1.21.3-3 [32.5 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libcom-err2 amd64 1.47.1-1+b1 [23.2 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 libk5crypto3 amd64 1.21.3-3 [79.9 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 libkeyutils1 amd64 1.6.3-4 [9092 B] Get: 12 http://deb.debian.org/debian trixie/main amd64 libkrb5-3 amd64 1.21.3-3 [324 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 libgssapi-krb5-2 amd64 1.21.3-3 [136 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 libtirpc3t64 amd64 1.3.4+ds-1.3+b1 [83.1 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libnsl2 amd64 1.3.0-3+b3 [40.6 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 readline-common all 8.2-5 [69.3 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 libreadline8t64 amd64 8.2-5 [169 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libpython3.12-stdlib amd64 3.12.7-3 [1966 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 python3.12 amd64 3.12.7-3 [671 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 libpython3-stdlib amd64 3.12.6-1 [9692 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 python3 amd64 3.12.6-1 [27.8 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 python3-scour all 0.38.2-5 [55.7 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 scour all 0.38.2-5 [16.3 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 cdbs all 0.4.166 [47.3 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 47 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 51 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libanyevent-perl amd64 7.170-2+b6 [384 kB] Fetched 27.4 MB in 0s (87.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.7-3_amd64.deb ... Unpacking libpython3.12-minimal:amd64 (3.12.7-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.6.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_amd64.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:amd64 (3.12.7-3) ... Setting up libexpat1:amd64 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20289 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_amd64.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../04-libkrb5support0_1.21.3-3_amd64.deb ... Unpacking libkrb5support0:amd64 (1.21.3-3) ... Selecting previously unselected package libcom-err2:amd64. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../06-libk5crypto3_1.21.3-3_amd64.deb ... Unpacking libk5crypto3:amd64 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../07-libkeyutils1_1.6.3-4_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../08-libkrb5-3_1.21.3-3_amd64.deb ... Unpacking libkrb5-3:amd64 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:amd64. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libtirpc.so.3 to /lib/x86_64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/x86_64-linux-gnu/libtirpc.so.3.0.0 to /lib/x86_64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:amd64 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:amd64. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_amd64.deb ... Unpacking libnsl2:amd64 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../14-libreadline8t64_8.2-5_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:amd64. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_amd64.deb ... Unpacking libpython3.12-stdlib:amd64 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_amd64.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21351 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.6-1_amd64.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../09-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package python3-scour. Preparing to unpack .../16-python3-scour_0.38.2-5_all.deb ... Unpacking python3-scour (0.38.2-5) ... Selecting previously unselected package scour. Preparing to unpack .../17-scour_0.38.2-5_all.deb ... Unpacking scour (0.38.2-5) ... Selecting previously unselected package cdbs. Preparing to unpack .../18-cdbs_0.4.166_all.deb ... Unpacking cdbs (0.4.166) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../19-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../20-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../21-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../22-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../25-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../27-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../33-libanyevent-perl_7.170-2+b6_amd64.deb ... Unpacking libanyevent-perl (7.170-2+b6) ... Setting up media-types (10.1.0) ... Setting up libanyevent-perl (7.170-2+b6) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libkeyutils1:amd64 (1.6.3-4) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:amd64 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libkrb5support0:amd64 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Dec 24 09:12:48 UTC 2025. Universal Time is now: Wed Dec 24 09:12:48 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up libk5crypto3:amd64 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libkrb5-3:amd64 (1.21.3-3) ... Setting up readline-common (8.2-5) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:amd64 (1.21.3-3) ... Setting up libreadline8t64:amd64 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtirpc3t64:amd64 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:amd64 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:amd64 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libpython3-stdlib:amd64 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-scour (0.38.2-5) ... Setting up scour (0.38.2-5) ... Setting up cdbs (0.4.166) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libanyevent-aggressiveidle-perl_0.04-1.1_source.changes dpkg-buildpackage: info: source package libanyevent-aggressiveidle-perl dpkg-buildpackage: info: source version 0.04-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Holger Levsen dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) rm -f Makefile.old debian/rules build test -x debian/rules mkdir -p "." cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for AnyEvent::AggressiveIdle Writing MYMETA.yml and MYMETA.json /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/AnyEvent chmod 755 blib/lib/AnyEvent touch blib/lib/AnyEvent/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/AnyEvent/AggressiveIdle chmod 755 blib/lib/auto/AnyEvent/AggressiveIdle touch blib/lib/auto/AnyEvent/AggressiveIdle/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/AnyEvent/AggressiveIdle chmod 755 blib/arch/auto/AnyEvent/AggressiveIdle touch blib/arch/auto/AnyEvent/AggressiveIdle/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'lib/AnyEvent/AggressiveIdle.pm' 'blib/lib/AnyEvent/AggressiveIdle.pm' cp lib/AnyEvent/AggressiveIdle.pm blib/lib/AnyEvent/AggressiveIdle.pm touch pm_to_blib true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/AnyEvent/AggressiveIdle.pm blib/man3/AnyEvent::AggressiveIdle.3pm Manifying 1 pod document true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' true true true true true true true true PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_base.t .... 1..6 ok 1 - use AnyEvent; ok 2 - use AnyEvent::AggressiveIdle; ok 3 - aggressive_idle works fine ok 4 - aggressive_idle blocks AE::idle ok 5 - Breaking idle process ok 6 - Breaknig inside idle process ok t/02_guards.t .. 1..6 ok 1 - use AnyEvent; ok 2 - use AnyEvent::AggressiveIdle; ok 3 - Two aggressive_idle counters are equal ok 4 - Timer works properly ok 5 - Subroutine was called 10 times ok 6 - Idle process was called 10 or 11 times ok All tests successful. Files=2, Tests=12, 3 wallclock secs ( 0.03 usr 0.00 sys + 2.00 cusr 0.19 csys = 2.22 CPU) Result: PASS true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-check fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) mkdir -p "." /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl" make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' true true true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/AnyEvent/AggressiveIdle.pm blib/man3/AnyEvent::AggressiveIdle.3pm Manifying 1 pod document true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/perl5" \ "blib/arch" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/lib/x86_64-linux-gnu/perl5/5.40" \ "blib/bin" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/bin" \ "blib/script" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/bin" \ "blib/man1" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man1" \ "blib/man3" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man3" Installing /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/perl5/AnyEvent/AggressiveIdle.pm Installing /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man3/AnyEvent::AggressiveIdle.3pm true true true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libanyevent-aggressiveidle-perl.substvars dh_installdirs -plibanyevent-aggressiveidle-perl \ dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdocs -plibanyevent-aggressiveidle-perl ./README dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installexamples -plibanyevent-aggressiveidle-perl dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installman -plibanyevent-aggressiveidle-perl dh_installman: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installinfo -plibanyevent-aggressiveidle-perl dh_installinfo: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installmenu -plibanyevent-aggressiveidle-perl dh_installmenu: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installcron -plibanyevent-aggressiveidle-perl dh_installcron: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_systemd_enable -plibanyevent-aggressiveidle-perl dh_systemd_enable: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installinit -plibanyevent-aggressiveidle-perl dh_installinit: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdebconf -plibanyevent-aggressiveidle-perl dh_installdebconf: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installemacsen -plibanyevent-aggressiveidle-perl dh_installemacsen: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installcatalogs -plibanyevent-aggressiveidle-perl dh_installcatalogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installpam -plibanyevent-aggressiveidle-perl dh_installpam: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installlogrotate -plibanyevent-aggressiveidle-perl dh_installlogrotate: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installlogcheck -plibanyevent-aggressiveidle-perl dh_installlogcheck: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installchangelogs -plibanyevent-aggressiveidle-perl ./Changes dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installudev -plibanyevent-aggressiveidle-perl dh_installudev: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_lintian -plibanyevent-aggressiveidle-perl dh_lintian: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_bugfiles -plibanyevent-aggressiveidle-perl dh_bugfiles: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_install -plibanyevent-aggressiveidle-perl dh_install: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_systemd_start -plibanyevent-aggressiveidle-perl dh_systemd_start: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_link -plibanyevent-aggressiveidle-perl dh_link: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installmime -plibanyevent-aggressiveidle-perl dh_installmime: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installgsettings -plibanyevent-aggressiveidle-perl dh_installgsettings: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip -plibanyevent-aggressiveidle-perl dh_strip: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip_nondeterminism -plibanyevent-aggressiveidle-perl dh_compress -plibanyevent-aggressiveidle-perl dh_compress: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_fixperms -plibanyevent-aggressiveidle-perl dh_makeshlibs -plibanyevent-aggressiveidle-perl dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdeb -plibanyevent-aggressiveidle-perl dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_perl -plibanyevent-aggressiveidle-perl dh_shlibdeps -plibanyevent-aggressiveidle-perl dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_gencontrol -plibanyevent-aggressiveidle-perl dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 7 in use) # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibanyevent-aggressiveidle-perl ; fi dh_md5sums -plibanyevent-aggressiveidle-perl dh_builddeb -plibanyevent-aggressiveidle-perl dpkg-deb: building package 'libanyevent-aggressiveidle-perl' in '../libanyevent-aggressiveidle-perl_0.04-1.1_all.deb'. dpkg-genbuildinfo --build=binary -O../libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo dpkg-genchanges --build=binary -O../libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3277413 and its subdirectories I: Current time: Tue Dec 23 21:13:05 -12 2025 I: pbuilder-time-stamp: 1766567585 Thu Nov 21 02:50:06 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos1-amd64.debian.net. Thu Nov 21 02:50:06 UTC 2024 I: Preparing to do remote build '2' on ionos1-amd64.debian.net. Thu Nov 21 02:50:06 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Thu Nov 21 02:50:06 UTC 2024 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-idLgAQ' ==================================================================================== Thu Nov 21 02:50:07 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos1-amd64, called using "2 libanyevent-aggressiveidle-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R 0.04-1.1" as arguments. Thu Nov 21 02:50:07 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-d9Ea4D4d" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 02:50:07 UTC 2024 I: Downloading source for trixie/libanyevent-aggressiveidle-perl=0.04-1.1 Reading package lists... Need to get 7831 B of source archives. Get:1 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (dsc) [2021 B] Get:2 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (tar) [3978 B] Get:3 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (diff) [1832 B] Fetched 7831 B in 0s (296 kB/s) Download complete and in download only mode Reading package lists... Need to get 7831 B of source archives. Get:1 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (dsc) [2021 B] Get:2 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (tar) [3978 B] Get:3 http://deb.debian.org/debian trixie/main libanyevent-aggressiveidle-perl 0.04-1.1 (diff) [1832 B] Fetched 7831 B in 0s (296 kB/s) Download complete and in download only mode ============================================================================= Re-Building libanyevent-aggressiveidle-perl in trixie on amd64 on ionos1-amd64 now. Date: Thu Nov 21 02:50:08 UTC 2024 Date UTC: Thu Nov 21 02:50:08 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_PAcl + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libanyevent-aggressiveidle-perl = debian-installer -o libanyevent-aggressiveidle-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libanyevent-aggressiveidle-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_PAcl --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2 --logfile b2/build.log libanyevent-aggressiveidle-perl_0.04-1.1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Nov 21 16:50:08 +14 2024 I: pbuilder-time-stamp: 1732157408 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libanyevent-aggressiveidle-perl_0.04-1.1.dsc] I: copying [./libanyevent-aggressiveidle-perl_0.04.orig.tar.gz] I: copying [./libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Jan 6 21:09:42 2021 gpgv: using RSA key B8BF54137B09D35CF026FE9D091AB856069AAA1C gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libanyevent-aggressiveidle-perl_0.04-1.1.dsc: no acceptable signature found dpkg-source: info: extracting libanyevent-aggressiveidle-perl in libanyevent-aggressiveidle-perl-0.04 dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04.orig.tar.gz dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D01_modify_environment starting debug: Running on ionos1-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 21 02:50 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=6ab60d0e92bd4161b690488c4b21e6ba LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=372414 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_PAcl --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2 --logfile b2/build.log libanyevent-aggressiveidle-perl_0.04-1.1.dsc' SUDO_GID=110 SUDO_UID=105 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7), cdbs, libanyevent-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-minimal{a} python3-scour{a} python3.12{a} python3.12-minimal{a} readline-common{a} scour{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libasync-interrupt-perl libev-perl libevent-perl libguard-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 55 newly installed, 0 to remove and 0 not upgraded. Need to get 27.4 MB of archives. After unpacking 106 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 libpython3.12-minimal amd64 3.12.7-3 [815 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.4-1 [106 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 python3.12-minimal amd64 3.12.7-3 [2162 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 python3-minimal amd64 3.12.6-1 [26.7 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 tzdata all 2024b-3 [255 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 libkrb5support0 amd64 1.21.3-3 [32.5 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libcom-err2 amd64 1.47.1-1+b1 [23.2 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 libk5crypto3 amd64 1.21.3-3 [79.9 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 libkeyutils1 amd64 1.6.3-4 [9092 B] Get: 12 http://deb.debian.org/debian trixie/main amd64 libkrb5-3 amd64 1.21.3-3 [324 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 libgssapi-krb5-2 amd64 1.21.3-3 [136 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 libtirpc3t64 amd64 1.3.4+ds-1.3+b1 [83.1 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libnsl2 amd64 1.3.0-3+b3 [40.6 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 readline-common all 8.2-5 [69.3 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 libreadline8t64 amd64 8.2-5 [169 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libpython3.12-stdlib amd64 3.12.7-3 [1966 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 python3.12 amd64 3.12.7-3 [671 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 libpython3-stdlib amd64 3.12.6-1 [9692 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 python3 amd64 3.12.6-1 [27.8 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 python3-scour all 0.38.2-5 [55.7 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 scour all 0.38.2-5 [16.3 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 cdbs all 0.4.166 [47.3 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 47 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 51 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libanyevent-perl amd64 7.170-2+b6 [384 kB] Fetched 27.4 MB in 0s (83.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.7-3_amd64.deb ... Unpacking libpython3.12-minimal:amd64 (3.12.7-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.6.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_amd64.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:amd64 (3.12.7-3) ... Setting up libexpat1:amd64 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20289 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_amd64.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../04-libkrb5support0_1.21.3-3_amd64.deb ... Unpacking libkrb5support0:amd64 (1.21.3-3) ... Selecting previously unselected package libcom-err2:amd64. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../06-libk5crypto3_1.21.3-3_amd64.deb ... Unpacking libk5crypto3:amd64 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../07-libkeyutils1_1.6.3-4_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../08-libkrb5-3_1.21.3-3_amd64.deb ... Unpacking libkrb5-3:amd64 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:amd64. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libtirpc.so.3 to /lib/x86_64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/x86_64-linux-gnu/libtirpc.so.3.0.0 to /lib/x86_64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:amd64 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:amd64. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_amd64.deb ... Unpacking libnsl2:amd64 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../14-libreadline8t64_8.2-5_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:amd64. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_amd64.deb ... Unpacking libpython3.12-stdlib:amd64 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_amd64.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21351 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.6-1_amd64.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../09-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package python3-scour. Preparing to unpack .../16-python3-scour_0.38.2-5_all.deb ... Unpacking python3-scour (0.38.2-5) ... Selecting previously unselected package scour. Preparing to unpack .../17-scour_0.38.2-5_all.deb ... Unpacking scour (0.38.2-5) ... Selecting previously unselected package cdbs. Preparing to unpack .../18-cdbs_0.4.166_all.deb ... Unpacking cdbs (0.4.166) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../19-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../20-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../21-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../22-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../25-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../27-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../33-libanyevent-perl_7.170-2+b6_amd64.deb ... Unpacking libanyevent-perl (7.170-2+b6) ... Setting up media-types (10.1.0) ... Setting up libanyevent-perl (7.170-2+b6) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libkeyutils1:amd64 (1.6.3-4) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libcom-err2:amd64 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up libkrb5support0:amd64 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Nov 21 02:50:42 UTC 2024. Universal Time is now: Thu Nov 21 02:50:42 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up libk5crypto3:amd64 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libkrb5-3:amd64 (1.21.3-3) ... Setting up readline-common (8.2-5) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:amd64 (1.21.3-3) ... Setting up libreadline8t64:amd64 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtirpc3t64:amd64 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:amd64 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:amd64 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libpython3-stdlib:amd64 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-scour (0.38.2-5) ... Setting up scour (0.38.2-5) ... Setting up cdbs (0.4.166) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/372414/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/372414/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libanyevent-aggressiveidle-perl_0.04-1.1_source.changes dpkg-buildpackage: info: source package libanyevent-aggressiveidle-perl dpkg-buildpackage: info: source version 0.04-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Holger Levsen dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) rm -f Makefile.old debian/rules build test -x debian/rules mkdir -p "." cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for AnyEvent::AggressiveIdle Writing MYMETA.yml and MYMETA.json /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/AnyEvent chmod 755 blib/lib/AnyEvent touch blib/lib/AnyEvent/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/AnyEvent/AggressiveIdle chmod 755 blib/lib/auto/AnyEvent/AggressiveIdle touch blib/lib/auto/AnyEvent/AggressiveIdle/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/AnyEvent/AggressiveIdle chmod 755 blib/arch/auto/AnyEvent/AggressiveIdle touch blib/arch/auto/AnyEvent/AggressiveIdle/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'lib/AnyEvent/AggressiveIdle.pm' 'blib/lib/AnyEvent/AggressiveIdle.pm' cp lib/AnyEvent/AggressiveIdle.pm blib/lib/AnyEvent/AggressiveIdle.pm touch pm_to_blib true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/AnyEvent/AggressiveIdle.pm blib/man3/AnyEvent::AggressiveIdle.3pm Manifying 1 pod document true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' true true true true true true true true PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_base.t .... 1..6 ok 1 - use AnyEvent; ok 2 - use AnyEvent::AggressiveIdle; ok 3 - aggressive_idle works fine ok 4 - aggressive_idle blocks AE::idle ok 5 - Breaking idle process ok 6 - Breaknig inside idle process ok t/02_guards.t .. 1..6 ok 1 - use AnyEvent; ok 2 - use AnyEvent::AggressiveIdle; ok 3 - Two aggressive_idle counters are equal ok 4 - Timer works properly ok 5 - Subroutine was called 10 times ok 6 - Idle process was called 10 or 11 times ok All tests successful. Files=2, Tests=12, 3 wallclock secs ( 0.02 usr 0.02 sys + 2.09 cusr 0.17 csys = 2.30 CPU) Result: PASS true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-check fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) mkdir -p "." /usr/bin/make -C . OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl" make[1]: Entering directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' true true true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/AnyEvent/AggressiveIdle.pm blib/man3/AnyEvent::AggressiveIdle.3pm Manifying 1 pod document true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/perl5" \ "blib/arch" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/lib/x86_64-linux-gnu/perl5/5.40" \ "blib/bin" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/bin" \ "blib/script" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/bin" \ "blib/man1" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man1" \ "blib/man3" "/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man3" Installing /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/perl5/AnyEvent/AggressiveIdle.pm Installing /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/debian/libanyevent-aggressiveidle-perl/usr/share/man/man3/AnyEvent::AggressiveIdle.3pm true true true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libanyevent-aggressiveidle-perl.substvars dh_installdirs -plibanyevent-aggressiveidle-perl \ dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdocs -plibanyevent-aggressiveidle-perl ./README dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installexamples -plibanyevent-aggressiveidle-perl dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installman -plibanyevent-aggressiveidle-perl dh_installman: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installinfo -plibanyevent-aggressiveidle-perl dh_installinfo: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installmenu -plibanyevent-aggressiveidle-perl dh_installmenu: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installcron -plibanyevent-aggressiveidle-perl dh_installcron: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_systemd_enable -plibanyevent-aggressiveidle-perl dh_systemd_enable: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installinit -plibanyevent-aggressiveidle-perl dh_installinit: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdebconf -plibanyevent-aggressiveidle-perl dh_installdebconf: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installemacsen -plibanyevent-aggressiveidle-perl dh_installemacsen: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installcatalogs -plibanyevent-aggressiveidle-perl dh_installcatalogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installpam -plibanyevent-aggressiveidle-perl dh_installpam: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installlogrotate -plibanyevent-aggressiveidle-perl dh_installlogrotate: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installlogcheck -plibanyevent-aggressiveidle-perl dh_installlogcheck: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installchangelogs -plibanyevent-aggressiveidle-perl ./Changes dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installudev -plibanyevent-aggressiveidle-perl dh_installudev: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_lintian -plibanyevent-aggressiveidle-perl dh_lintian: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_bugfiles -plibanyevent-aggressiveidle-perl dh_bugfiles: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_install -plibanyevent-aggressiveidle-perl dh_install: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_systemd_start -plibanyevent-aggressiveidle-perl dh_systemd_start: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_link -plibanyevent-aggressiveidle-perl dh_link: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installmime -plibanyevent-aggressiveidle-perl dh_installmime: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installgsettings -plibanyevent-aggressiveidle-perl dh_installgsettings: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip -plibanyevent-aggressiveidle-perl dh_strip: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_strip_nondeterminism -plibanyevent-aggressiveidle-perl dh_compress -plibanyevent-aggressiveidle-perl dh_compress: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_fixperms -plibanyevent-aggressiveidle-perl dh_makeshlibs -plibanyevent-aggressiveidle-perl dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdeb -plibanyevent-aggressiveidle-perl dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_perl -plibanyevent-aggressiveidle-perl dh_shlibdeps -plibanyevent-aggressiveidle-perl dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_gencontrol -plibanyevent-aggressiveidle-perl dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 7 in use) # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibanyevent-aggressiveidle-perl ; fi dh_md5sums -plibanyevent-aggressiveidle-perl dh_builddeb -plibanyevent-aggressiveidle-perl dpkg-deb: building package 'libanyevent-aggressiveidle-perl' in '../libanyevent-aggressiveidle-perl_0.04-1.1_all.deb'. dpkg-genbuildinfo --build=binary -O../libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo dpkg-genchanges --build=binary -O../libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/372414/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/372414/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/372414 and its subdirectories I: Current time: Thu Nov 21 16:51:10 +14 2024 I: pbuilder-time-stamp: 1732157470 + false + set +x Thu Nov 21 02:51:10 UTC 2024 I: Signing ./b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo as libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc Thu Nov 21 02:51:10 UTC 2024 I: Signed ./b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo as ./b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc Thu Nov 21 02:51:10 UTC 2024 - build #2 for libanyevent-aggressiveidle-perl/trixie/amd64 on ionos1-amd64 done. Starting cleanup. All cleanup done. Thu Nov 21 02:51:10 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-d9Ea4D4d, removing. /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R: total 56 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 02:50 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 02:51 b2 -rw-r--r-- 1 jenkins jenkins 2021 Jan 6 2021 libanyevent-aggressiveidle-perl_0.04-1.1.dsc -rw------- 1 jenkins jenkins 44217 Nov 21 02:50 rbuildlog.7tXxjAR /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1: total 80 -rw-r--r-- 1 jenkins jenkins 40638 Nov 21 02:50 build.log -rw-r--r-- 1 jenkins jenkins 1832 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2021 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1.dsc -rw-r--r-- 1 jenkins jenkins 6644 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_all.deb -rw-r--r-- 1 jenkins jenkins 5619 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6501 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1298 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes -rw-r--r-- 1 jenkins jenkins 1494 Nov 21 02:50 libanyevent-aggressiveidle-perl_0.04-1.1_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2: total 84 -rw-r--r-- 1 jenkins jenkins 42547 Nov 21 02:51 build.log -rw-r--r-- 1 jenkins jenkins 1832 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2021 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1.dsc -rw-r--r-- 1 jenkins jenkins 6644 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1_all.deb -rw-r--r-- 1 jenkins jenkins 5610 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6492 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1298 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes -rw-r--r-- 1 jenkins jenkins 1494 Nov 21 02:51 libanyevent-aggressiveidle-perl_0.04-1.1_source.changes Thu Nov 21 02:51:10 UTC 2024 I: Deleting $TMPDIR on ionos1-amd64.debian.net. Thu Nov 21 02:51:11 UTC 2024 I: libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes: Format: 1.8 Date: Wed, 06 Jan 2021 22:07:16 +0100 Source: libanyevent-aggressiveidle-perl Binary: libanyevent-aggressiveidle-perl Architecture: all Version: 0.04-1.1 Distribution: unstable Urgency: medium Maintainer: Dmitry E. Oboukhov Changed-By: Holger Levsen Description: libanyevent-aggressiveidle-perl - Aggressive idle processes for AnyEvent. Changes: libanyevent-aggressiveidle-perl (0.04-1.1) unstable; urgency=medium . * Non maintainer upload by the Reproducible Builds team. * No source change upload to rebuild on buildd with .buildinfo files. Checksums-Sha1: e43df8d009b0bcf45a424be6fbb74da4dd46be51 6644 libanyevent-aggressiveidle-perl_0.04-1.1_all.deb 5f215104264f96284217832f16e9ba24efeede92 5619 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo Checksums-Sha256: 125d3cb574381dbdc4501fb29d4037ac06913b82cba536f4141bce7089e64ac2 6644 libanyevent-aggressiveidle-perl_0.04-1.1_all.deb d73a15f94e66d2666a10dbae454c256979cf388bc218462b42249e0d6c34f19b 5619 libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo Files: 92a1a0464a915a804720ad5e0fcd3acf 6644 perl extra libanyevent-aggressiveidle-perl_0.04-1.1_all.deb 6a53146eb6227a8cde8950a1560661b0 5619 perl extra libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-21 02:50:06.211076246 +0000 +++ b2/build.log 2024-11-21 02:51:10.760162281 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Tue Dec 23 21:10:04 -12 2025 -I: pbuilder-time-stamp: 1766567404 +I: Current time: Thu Nov 21 16:50:08 +14 2024 +I: pbuilder-time-stamp: 1732157408 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -25,52 +25,84 @@ dpkg-source: info: unpacking libanyevent-aggressiveidle-perl_0.04-1.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3277413/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D01_modify_environment starting +debug: Running on ionos1-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 21 02:50 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='amd64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='f7b0a23b44ef465e86e2e235cf4818e0' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3277413' - PS1='# ' - PS2='> ' + INVOCATION_ID=6ab60d0e92bd4161b690488c4b21e6ba + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=372414 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_hy8S --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1 --logfile b1/build.log libanyevent-aggressiveidle-perl_0.04-1.1.dsc' - SUDO_GID='110' - SUDO_UID='105' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/pbuilderrc_PAcl --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2 --logfile b2/build.log libanyevent-aggressiveidle-perl_0.04-1.1.dsc' + SUDO_GID=110 + SUDO_UID=105 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos5-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3277413/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -165,7 +197,7 @@ Get: 53 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libanyevent-perl amd64 7.170-2+b6 [384 kB] -Fetched 27.4 MB in 0s (87.6 MB/s) +Fetched 27.4 MB in 0s (83.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) @@ -365,8 +397,8 @@ Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' -Local time is now: Wed Dec 24 09:12:48 UTC 2025. -Universal Time is now: Wed Dec 24 09:12:48 UTC 2025. +Local time is now: Thu Nov 21 02:50:42 UTC 2024. +Universal Time is now: Thu Nov 21 02:50:42 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... @@ -419,7 +451,11 @@ fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libanyevent-aggressiveidle-perl_0.04-1.1_source.changes +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libanyevent-aggressiveidle-perl-0.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libanyevent-aggressiveidle-perl_0.04-1.1_source.changes dpkg-buildpackage: info: source package libanyevent-aggressiveidle-perl dpkg-buildpackage: info: source version 0.04-1.1 dpkg-buildpackage: info: source distribution unstable @@ -521,7 +557,7 @@ ok 6 - Idle process was called 10 or 11 times ok All tests successful. -Files=2, Tests=12, 3 wallclock secs ( 0.03 usr 0.00 sys + 2.00 cusr 0.19 csys = 2.22 CPU) +Files=2, Tests=12, 3 wallclock secs ( 0.02 usr 0.02 sys + 2.09 cusr 0.17 csys = 2.30 CPU) Result: PASS true make[1]: Leaving directory '/build/reproducible-path/libanyevent-aggressiveidle-perl-0.04' @@ -638,12 +674,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/372414/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3277413 and its subdirectories -I: Current time: Tue Dec 23 21:13:05 -12 2025 -I: pbuilder-time-stamp: 1766567585 +I: removing directory /srv/workspace/pbuilder/372414 and its subdirectories +I: Current time: Thu Nov 21 16:51:10 +14 2024 +I: pbuilder-time-stamp: 1732157470 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.diff: 66.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.diff.gz b2/build.log: 79.9% -- replaced with stdout Compressing the 1st log... b1/build.log: 80.4% -- replaced with stdout Thu Nov 21 02:51:12 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libanyevent-aggressiveidle-perl_trixie_amd64_1732157472 + touch /var/log/reproducible-builds/diffoscope_stamp_libanyevent-aggressiveidle-perl_trixie_amd64_1732157472 + RESULT=0 + systemd-run '--description=diffoscope on libanyevent-aggressiveidle-perl/0.04-1.1 in trixie/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_18-23305 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R --run-session -c jenkins-reproducible-trixie-diffoscope-ff45f3d4-7d95-4256-93b2-4b46b22bc8b8 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/dbd-tmp-TonOGfi ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/libanyevent-aggressiveidle-perl_0.04-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/libanyevent-aggressiveidle-perl_0.04-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/libanyevent-aggressiveidle-perl_0.04-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_18-23305.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/libanyevent-aggressiveidle-perl_0.04-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/libanyevent-aggressiveidle-perl_0.04-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/libanyevent-aggressiveidle-perl_0.04-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.w04QeL3R/b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.374s) 0.374s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 783ms CPU time consumed: 769ms _ _ _ _ | (_) |__ __ _ _ __ _ _ _____ _____ _ __ | |_ __ _ __ _ __ _ | | | '_ \ / _` | '_ \| | | |/ _ \ \ / / _ \ '_ \| __|____ / _` |/ _` |/ _` | | | | |_) | (_| | | | | |_| | __/\ V / __/ | | | ||_____| (_| | (_| | (_| | |_|_|_.__/ \__,_|_| |_|\__, |\___| \_/ \___|_| |_|\__| \__,_|\__, |\__, | |___/ |___/ |___/ _ _ _ _ _ _ __ ___ ___ ___(_)_ _____(_) __| | | ___ _ __ ___ _ __| | | '__/ _ \/ __/ __| \ \ / / _ \ |/ _` | |/ _ \_____| '_ \ / _ \ '__| | | | | __/\__ \__ \ |\ V / __/ | (_| | | __/_____| |_) | __/ | | | |_| \___||___/___/_| \_/ \___|_|\__,_|_|\___| | .__/ \___|_| |_| |_| Thu Nov 21 02:51:13 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Thu Nov 21 02:51:13 UTC 2024 I: libanyevent-aggressiveidle-perl from trixie built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-21 02:51:14] INFO: Starting at 2024-11-21 02:51:14.537472 [2024-11-21 02:51:14] INFO: Generating the pages of 1 package(s) [2024-11-21 02:51:15] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/amd64/libanyevent-aggressiveidle-perl didn't produce a buildlog, even though it has been built. [2024-11-21 02:51:15] INFO: Finished at 2024-11-21 02:51:15.350610, took: 0:00:00.813163 Thu Nov 21 02:51:15 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/amd64/libanyevent-aggressiveidle-perl.html Thu Nov 21 02:51:15 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Nov 21 02:51:15 UTC 2024 I: Submitting 8.0K b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc https://buildinfo.debian.net/5f215104264f96284217832f16e9ba24efeede92/libanyevent-aggressiveidle-perl_0.04-1.1_all Thu Nov 21 02:51:16 UTC 2024 I: Submitting 8.0K b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc https://buildinfo.debian.net/508a811f44ca1158628d0e80c84eff9014bf4126/libanyevent-aggressiveidle-perl_0.04-1.1_all Thu Nov 21 02:51:16 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Nov 21 02:51:16 UTC 2024 I: Done submitting .buildinfo files. Thu Nov 21 02:51:16 UTC 2024 I: Removing signed libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc files: removed './b1/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc' removed './b2/libanyevent-aggressiveidle-perl_0.04-1.1_amd64.buildinfo.asc' 1732157476 amd64 trixie libanyevent-aggressiveidle-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.rbuild.log: 77.8% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanyevent-aggressiveidle-perl_0.04-1.1.rbuild.log.gz [2024-11-21 02:51:17] INFO: Starting at 2024-11-21 02:51:17.302367 [2024-11-21 02:51:17] INFO: Generating the pages of 1 package(s) [2024-11-21 02:51:17] INFO: Finished at 2024-11-21 02:51:17.884131, took: 0:00:00.581770 All cleanup done. Thu Nov 21 02:51:17 UTC 2024 - total duration: 0h 4m 17s. Thu Nov 21 02:51:17 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-X9xe3kYX, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 4min 21.332s CPU time consumed: 8.072s