Running as unit: rb-build-amd64_20-67966.service; invocation ID: 5a3c124ee9374365817efa171fc9f15a ==================================================================================== Tue Sep 16 05:37:11 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_20) on jenkins, called using "ionos15-amd64 ionos1-amd64" as arguments. Tue Sep 16 05:37:11 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-r4PpYHr1" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Sep 16 05:37:11 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos15-amd64.debian.net is marked as down. Tue Sep 16 05:37:11 UTC 2025 - checking via ssh if ionos15-amd64.debian.net is up. removed '/tmp/read-only-fs-test-yZP1p4' Tue Sep 16 05:37:11 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Tue Sep 16 05:37:11 UTC 2025 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-49iDfX' ok, let's check if libperlio-gzip-perl is building anywhere yet… ok, libperlio-gzip-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libperlio-gzip-perl in unstable on amd64 on jenkins now. 1st build will be done on ionos15-amd64.debian.net. 2nd build will be done on ionos1-amd64.debian.net. ============================================================================= Tue Sep 16 05:37:18 UTC 2025 I: starting to build libperlio-gzip-perl/unstable/amd64 on jenkins on '2025-09-16 05:37' Tue Sep 16 05:37:18 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_20/67966/console.log 1758001038 amd64 unstable libperlio-gzip-perl Tue Sep 16 05:37:18 UTC 2025 I: Downloading source for unstable/libperlio-gzip-perl=0.20-1 --2025-09-16 05:37:18-- http://deb.debian.org/debian/pool/main/libp/libperlio-gzip-perl/libperlio-gzip-perl_0.20-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2079 (2.0K) [text/prs.lines.tag] Saving to: ‘libperlio-gzip-perl_0.20-1.dsc’ 0K .. 100% 239M=0s 2025-09-16 05:37:18 (239 MB/s) - ‘libperlio-gzip-perl_0.20-1.dsc’ saved [2079/2079] --2025-09-16 05:37:18-- http://deb.debian.org/debian/pool/main/libp/libperlio-gzip-perl/libperlio-gzip-perl_0.20-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2079 (2.0K) [text/prs.lines.tag] Saving to: ‘libperlio-gzip-perl_0.20-1.dsc’ 0K .. 100% 239M=0s 2025-09-16 05:37:18 (239 MB/s) - ‘libperlio-gzip-perl_0.20-1.dsc’ saved [2079/2079] Tue Sep 16 05:37:18 UTC 2025 I: libperlio-gzip-perl_0.20-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libperlio-gzip-perl Binary: libperlio-gzip-perl Architecture: any Version: 0.20-1 Maintainer: Debian Perl Group Homepage: https://metacpan.org/release/PerlIO-gzip Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), zlib1g-dev Package-List: libperlio-gzip-perl deb perl optional arch=any Checksums-Sha1: a1627a023babe66a1e9994d04e08ce76b42ab2ee 19076 libperlio-gzip-perl_0.20.orig.tar.gz a4a9ded3ad43f8189113f07f632ed5e30b49b130 2404 libperlio-gzip-perl_0.20-1.debian.tar.xz Checksums-Sha256: 4848679a3f201e3f3b0c5f6f9526e602af52923ffa471a2a3657db786bd3bdc5 19076 libperlio-gzip-perl_0.20.orig.tar.gz 9008f496338b36f36cf2f79c5b79e6a0287334e4bc3fb69a1feb92dfbc3fa70e 2404 libperlio-gzip-perl_0.20-1.debian.tar.xz Files: 0393eae5d0b23df6cf40ed44af7d711c 19076 libperlio-gzip-perl_0.20.orig.tar.gz f2060c75903f20298493d7353d4e2d17 2404 libperlio-gzip-perl_0.20-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKrtl4ACgkQV5wWDUye I+gaRQ/8DNm8W7A+lkMh0LvbY8DePT0mFue3PQvuSnMa2TP7Ij5uxL/2qAkvJ9vu gjGaRybcZ/ld2XSG1BZdcee7NqLV15F1dh4NFKpV1tJxsR8wfPloApcdUg87aXu3 qR1uYWZS5CY5bbxxjlkDcsXPjq8RUdnjRyi+wzKVbYigE3CsCNMxNDHStkR5hhVB 5SaszZdJkrcJ6c2IiNHYG/6i26DhmkIwP4ITy1muJkVj0ewnCF4a0LDlDgh/oIlj a+DYDONEvK2GU5r2acfEduruNo6FiX+mfZwnKHjiLt642y50+JrRa6Eo74LNkU+r dj/v9r7oHsitgzKShVtIuE8eMAONNmU/k0OdrcZ0ntZfYZUBcqaaDr+1Ttf49pZi CWmQkTuALe6PJeSAhchCeqiXEiC8QFovY3LAutW5Zd5ac8oLLMpDNcrHrqKJcHM0 H9TJApDtQcAcHgdH+leQOgWVfHhMdTs+5lpxjkdQdEn5jtXTef73u/2RN0G8Npq3 AXloqvYlMdCDYzCxh97IDTz+y+0Hcwhgm/TDATQlp8dR7REKjLFizYASd4XKlBTc 2Gbd3gBQdbUN11z3+rgJ+bUPTu7adnw1LLUYxUNDXARDHtO4FIcxjr6lZh311kWA 9GL8Z/aSLjvOv6x4T1eoEsfPB0vUiPk4iTl2ImW6r18MPFoz45o= =bcrU -----END PGP SIGNATURE----- Tue Sep 16 05:37:18 UTC 2025 I: Checking whether the package is not for us Tue Sep 16 05:37:18 UTC 2025 I: Starting 1st build on remote node ionos15-amd64.debian.net. Tue Sep 16 05:37:18 UTC 2025 I: Preparing to do remote build '1' on ionos15-amd64.debian.net. Tue Sep 16 05:37:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos15-amd64.debian.net is marked as down. Tue Sep 16 05:37:18 UTC 2025 - checking via ssh if ionos15-amd64.debian.net is up. removed '/tmp/read-only-fs-test-N0apot' ==================================================================================== Mon Oct 19 12:00:18 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos15-amd64, called using "1 libperlio-gzip-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty 0.20-1" as arguments. Mon Oct 19 12:00:18 UTC 2026 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-4GQPtq5z" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Oct 19 12:00:18 UTC 2026 I: Downloading source for unstable/libperlio-gzip-perl=0.20-1 Reading package lists... NOTICE: 'libperlio-gzip-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (dsc) [2079 B] Get:2 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (tar) [19.1 kB] Get:3 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (diff) [2404 B] Fetched 23.6 kB in 0s (729 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libperlio-gzip-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (dsc) [2079 B] Get:2 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (tar) [19.1 kB] Get:3 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (diff) [2404 B] Fetched 23.6 kB in 0s (729 kB/s) Download complete and in download only mode ============================================================================= Building libperlio-gzip-perl in unstable on amd64 on ionos15-amd64 now. Date: Mon Oct 19 12:00:18 UTC 2026 Date UTC: Mon Oct 19 12:00:18 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Oct 19 00:00:18 -12 2026 I: pbuilder-time-stamp: 1792411218 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libperlio-gzip-perl_0.20-1.dsc] I: copying [./libperlio-gzip-perl_0.20.orig.tar.gz] I: copying [./libperlio-gzip-perl_0.20-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libperlio-gzip-perl_0.20-1.dsc: no acceptable signature found dpkg-source: info: extracting libperlio-gzip-perl in libperlio-gzip-perl-0.20 dpkg-source: info: unpacking libperlio-gzip-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.20-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3417926/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='97495404a0b84f48907302d7afa4133e' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3417926' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_5z2B --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1 --logfile b1/build.log libperlio-gzip-perl_0.20-1.dsc' SUDO_GID='111' SUDO_HOME='/var/lib/jenkins' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3417926/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19917 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 13.2 MB of archives. After unpacking 49.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.1-2+b1 [244 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2 [68.5 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41.1-3 [100 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.20-1 [324 kB] Get: 12 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.193-3 [192 kB] Get: 23 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-2 [108 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.14.5+dfsg-0.2 [638 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.1-2+b1 [1680 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 libperl-dev amd64 5.40.1-6 [1109 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.1-1+b1 [920 kB] Fetched 13.2 MB in 7s (1855 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19917 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_amd64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_amd64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_amd64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.193-3_amd64.deb ... Unpacking libelf1t64:amd64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_amd64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_amd64.deb ... Unpacking libxml2-16:amd64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_amd64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../29-libperl-dev_5.40.1-6_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-6) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../30-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:amd64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libperlio-gzip-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libperlio-gzip-perl_0.20-1_source.changes dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.20-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' Running Mkbootstrap for gzip () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' gzip.xs > gzip.xsc chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 cp gzip.pm blib/lib/PerlIO/gzip.pm mv gzip.xsc gzip.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 129736 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 129736 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 129736 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 129736 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 0 wallclock secs ( 0.06 usr 0.03 sys + 0.40 cusr 0.04 csys = 0.53 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libperlio-gzip-perl/ make -j42 install DESTDIR=/build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/PerlIO/gzip/gzip.so Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/PerlIO/gzip.pm Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb'. dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.20-1_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.buildinfo dpkg-genchanges --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3417926 and its subdirectories I: Current time: Mon Oct 19 00:02:38 -12 2026 I: pbuilder-time-stamp: 1792411358 Mon Oct 19 12:02:38 UTC 2026 I: Signing ./b1/libperlio-gzip-perl_0.20-1_amd64.buildinfo as libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc Mon Oct 19 12:02:38 UTC 2026 I: Signed ./b1/libperlio-gzip-perl_0.20-1_amd64.buildinfo as ./b1/libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc Mon Oct 19 12:02:38 UTC 2026 - build #1 for libperlio-gzip-perl/unstable/amd64 on ionos15-amd64 done. Starting cleanup. All cleanup done. Mon Oct 19 12:02:38 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-4GQPtq5z, removing. /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Sep 16 05:39 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 16 05:37 b2 -rw-rw-r-- 1 jenkins jenkins 2079 Jun 16 2022 libperlio-gzip-perl_0.20-1.dsc -rw------- 1 jenkins jenkins 3263 Sep 16 05:37 rbuildlog.ytRh9bl /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1: total 148 -rw-r--r-- 1 jenkins jenkins 40126 Sep 16 05:39 build.log -rw-r--r-- 1 jenkins jenkins 35408 Sep 16 05:39 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb -rw-r--r-- 1 jenkins jenkins 2404 Sep 16 05:39 libperlio-gzip-perl_0.20-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2079 Sep 16 05:39 libperlio-gzip-perl_0.20-1.dsc -rw-r--r-- 1 jenkins jenkins 5028 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5910 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2300 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.changes -rw-r--r-- 1 jenkins jenkins 17256 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.deb -rw-r--r-- 1 jenkins jenkins 2414 Sep 16 05:39 libperlio-gzip-perl_0.20-1_source.changes -rw-r--r-- 1 jenkins jenkins 19076 Sep 16 05:39 libperlio-gzip-perl_0.20.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2: total 0 Tue Sep 16 05:39:40 UTC 2025 I: Deleting $TMPDIR on ionos15-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Oct 19 00:00:18 -12 2026 I: pbuilder-time-stamp: 1792411218 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libperlio-gzip-perl_0.20-1.dsc] I: copying [./libperlio-gzip-perl_0.20.orig.tar.gz] I: copying [./libperlio-gzip-perl_0.20-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libperlio-gzip-perl_0.20-1.dsc: no acceptable signature found dpkg-source: info: extracting libperlio-gzip-perl in libperlio-gzip-perl-0.20 dpkg-source: info: unpacking libperlio-gzip-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.20-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3417926/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='97495404a0b84f48907302d7afa4133e' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3417926' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_5z2B --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1 --logfile b1/build.log libperlio-gzip-perl_0.20-1.dsc' SUDO_GID='111' SUDO_HOME='/var/lib/jenkins' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3417926/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19917 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 13.2 MB of archives. After unpacking 49.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.1-2+b1 [244 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2 [68.5 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41.1-3 [100 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.20-1 [324 kB] Get: 12 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.193-3 [192 kB] Get: 23 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-2 [108 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.14.5+dfsg-0.2 [638 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.1-2+b1 [1680 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 libperl-dev amd64 5.40.1-6 [1109 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.1-1+b1 [920 kB] Fetched 13.2 MB in 7s (1855 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19917 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_amd64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_amd64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_amd64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.193-3_amd64.deb ... Unpacking libelf1t64:amd64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_amd64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_amd64.deb ... Unpacking libxml2-16:amd64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_amd64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../29-libperl-dev_5.40.1-6_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-6) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../30-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:amd64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libperlio-gzip-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libperlio-gzip-perl_0.20-1_source.changes dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.20-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' Running Mkbootstrap for gzip () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' gzip.xs > gzip.xsc chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 cp gzip.pm blib/lib/PerlIO/gzip.pm mv gzip.xsc gzip.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 129736 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 129736 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 129736 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 129736 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 0 wallclock secs ( 0.06 usr 0.03 sys + 0.40 cusr 0.04 csys = 0.53 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libperlio-gzip-perl/ make -j42 install DESTDIR=/build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/PerlIO/gzip/gzip.so Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/PerlIO/gzip.pm Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb'. dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.20-1_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.buildinfo dpkg-genchanges --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3417926 and its subdirectories I: Current time: Mon Oct 19 00:02:38 -12 2026 I: pbuilder-time-stamp: 1792411358 Tue Sep 16 05:39:40 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos1-amd64.debian.net. Tue Sep 16 05:39:40 UTC 2025 I: Preparing to do remote build '2' on ionos1-amd64.debian.net. Tue Sep 16 05:39:40 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Tue Sep 16 05:39:40 UTC 2025 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-R4lZWA' ==================================================================================== Tue Sep 16 05:39:40 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos1-amd64, called using "2 libperlio-gzip-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty 0.20-1" as arguments. Tue Sep 16 05:39:40 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-eQ03hOOF" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Sep 16 05:39:41 UTC 2025 I: Downloading source for unstable/libperlio-gzip-perl=0.20-1 Reading package lists... NOTICE: 'libperlio-gzip-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (dsc) [2079 B] Get:2 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (tar) [19.1 kB] Get:3 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (diff) [2404 B] Fetched 23.6 kB in 0s (1459 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libperlio-gzip-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (dsc) [2079 B] Get:2 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (tar) [19.1 kB] Get:3 http://deb.debian.org/debian unstable/main libperlio-gzip-perl 0.20-1 (diff) [2404 B] Fetched 23.6 kB in 0s (1459 kB/s) Download complete and in download only mode ============================================================================= Re-Building libperlio-gzip-perl in unstable on amd64 on ionos1-amd64 now. Date: Tue Sep 16 05:39:41 UTC 2025 Date UTC: Tue Sep 16 05:39:41 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_AeUN + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libperlio-gzip-perl = debian-installer -o libperlio-gzip-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libperlio-gzip-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_AeUN --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2 --logfile b2/build.log libperlio-gzip-perl_0.20-1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue Sep 16 19:39:41 +14 2025 I: pbuilder-time-stamp: 1758001181 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libperlio-gzip-perl_0.20-1.dsc] I: copying [./libperlio-gzip-perl_0.20.orig.tar.gz] I: copying [./libperlio-gzip-perl_0.20-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libperlio-gzip-perl_0.20-1.dsc: no acceptable signature found dpkg-source: info: extracting libperlio-gzip-perl in libperlio-gzip-perl-0.20 dpkg-source: info: unpacking libperlio-gzip-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.20-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D01_modify_environment starting debug: Running on ionos1-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Sep 16 05:39 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=40 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=15137a2135ed40bb9f4c18902251b109 LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=3317270 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_AeUN --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2 --logfile b2/build.log libperlio-gzip-perl_0.20-1.dsc' SUDO_GID=110 SUDO_HOME=/var/lib/jenkins SUDO_UID=105 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19917 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 13.2 MB of archives. After unpacking 49.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.1-2+b1 [244 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2 [68.5 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41.1-3 [100 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.20-1 [324 kB] Get: 12 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.193-3 [192 kB] Get: 23 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-2 [108 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.14.5+dfsg-0.2 [638 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.1-2+b1 [1680 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 libperl-dev amd64 5.40.1-6 [1109 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.1-1+b1 [920 kB] Fetched 13.2 MB in 0s (129 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19917 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_amd64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_amd64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_amd64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.193-3_amd64.deb ... Unpacking libelf1t64:amd64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_amd64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_amd64.deb ... Unpacking libxml2-16:amd64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_amd64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../29-libperl-dev_5.40.1-6_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-6) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../30-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:amd64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libperlio-gzip-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libperlio-gzip-perl_0.20-1_source.changes dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.20-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build make -j40 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' gzip.xs > gzip.xsc Running Mkbootstrap for gzip () chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 cp gzip.pm blib/lib/PerlIO/gzip.pm mv gzip.xsc gzip.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_auto_test make -j40 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 1380656 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 1380656 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 1380656 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 1380656 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 1 wallclock secs ( 0.06 usr 0.02 sys + 0.76 cusr 0.03 csys = 0.87 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libperlio-gzip-perl/ make -j40 install DESTDIR=/build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/PerlIO/gzip/gzip.so Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/PerlIO/gzip.pm Installing /build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.20-1_amd64.deb'. dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.buildinfo dpkg-genchanges --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3317270 and its subdirectories I: Current time: Tue Sep 16 19:40:19 +14 2025 I: pbuilder-time-stamp: 1758001219 + false + set +x Tue Sep 16 05:40:19 UTC 2025 I: Signing ./b2/libperlio-gzip-perl_0.20-1_amd64.buildinfo as libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc Tue Sep 16 05:40:19 UTC 2025 I: Signed ./b2/libperlio-gzip-perl_0.20-1_amd64.buildinfo as ./b2/libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc Tue Sep 16 05:40:19 UTC 2025 - build #2 for libperlio-gzip-perl/unstable/amd64 on ionos1-amd64 done. Starting cleanup. All cleanup done. Tue Sep 16 05:40:19 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-eQ03hOOF, removing. /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty: total 56 drwxrwxr-x 2 jenkins jenkins 4096 Sep 16 05:39 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 16 05:40 b2 -rw-rw-r-- 1 jenkins jenkins 2079 Jun 16 2022 libperlio-gzip-perl_0.20-1.dsc -rw------- 1 jenkins jenkins 43676 Sep 16 05:39 rbuildlog.ytRh9bl /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1: total 148 -rw-r--r-- 1 jenkins jenkins 40126 Sep 16 05:39 build.log -rw-r--r-- 1 jenkins jenkins 35408 Sep 16 05:39 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb -rw-r--r-- 1 jenkins jenkins 2404 Sep 16 05:39 libperlio-gzip-perl_0.20-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2079 Sep 16 05:39 libperlio-gzip-perl_0.20-1.dsc -rw-r--r-- 1 jenkins jenkins 5028 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5910 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2300 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.changes -rw-r--r-- 1 jenkins jenkins 17256 Sep 16 05:39 libperlio-gzip-perl_0.20-1_amd64.deb -rw-r--r-- 1 jenkins jenkins 2414 Sep 16 05:39 libperlio-gzip-perl_0.20-1_source.changes -rw-r--r-- 1 jenkins jenkins 19076 Sep 16 05:39 libperlio-gzip-perl_0.20.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2: total 152 -rw-rw-r-- 1 jenkins jenkins 42054 Sep 16 05:40 build.log -rw-r--r-- 1 jenkins jenkins 35408 Sep 16 05:40 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb -rw-r--r-- 1 jenkins jenkins 2404 Sep 16 05:40 libperlio-gzip-perl_0.20-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2079 Sep 16 05:40 libperlio-gzip-perl_0.20-1.dsc -rw-rw-r-- 1 jenkins jenkins 5028 Sep 16 05:40 libperlio-gzip-perl_0.20-1_amd64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5910 Sep 16 05:40 libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 2300 Sep 16 05:40 libperlio-gzip-perl_0.20-1_amd64.changes -rw-r--r-- 1 jenkins jenkins 17256 Sep 16 05:40 libperlio-gzip-perl_0.20-1_amd64.deb -rw-rw-r-- 1 jenkins jenkins 2414 Sep 16 05:40 libperlio-gzip-perl_0.20-1_source.changes -rw-r--r-- 1 jenkins jenkins 19076 Sep 16 05:40 libperlio-gzip-perl_0.20.orig.tar.gz Tue Sep 16 05:40:19 UTC 2025 I: Deleting $TMPDIR on ionos1-amd64.debian.net. Tue Sep 16 05:40:20 UTC 2025 I: libperlio-gzip-perl_0.20-1_amd64.changes: Format: 1.8 Date: Fri, 17 Jun 2022 00:01:30 +0100 Source: libperlio-gzip-perl Binary: libperlio-gzip-perl libperlio-gzip-perl-dbgsym Architecture: amd64 Version: 0.20-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libperlio-gzip-perl - module providing a PerlIO layer to gzip/gunzip Changes: libperlio-gzip-perl (0.20-1) unstable; urgency=medium . [ Florian Schlichting ] IGNORE-VERSION: 0.20-1 no relevant code changes . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Jonathan Yu from Uploaders. Thanks for your work! . [ Florian Schlichting ] * Import upstream version 0.20 * Add upstream metadata . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Debian Janitor ] * Bump debhelper from old 9 to 12. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. Checksums-Sha1: 33e0ea1573c8258d23ad3460b744deb9aeeaba1b 35408 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb 5c66d88228aaa62bc64a3a6b3fbef23795fcb802 5028 libperlio-gzip-perl_0.20-1_amd64.buildinfo b183787f6917c953536f06c1b484a57818829350 17256 libperlio-gzip-perl_0.20-1_amd64.deb Checksums-Sha256: 96fbe33d19dffc793af464f15c59c45a02b2f02bdc9de3fba2dc89298b94dfd3 35408 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb 8ba3db909f923a61876c1cbea42c61ec7a357d9b3988c53f970b4513153d7dee 5028 libperlio-gzip-perl_0.20-1_amd64.buildinfo c805b40102a01f48c0b6615a757cbb214433a1b0d0cd7cf99cc421d829951b1d 17256 libperlio-gzip-perl_0.20-1_amd64.deb Files: 0cf64ffff76b9d49b9a94ba153eb78cc 35408 debug optional libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb 0e86f254d490d94762940df7652e0318 5028 perl optional libperlio-gzip-perl_0.20-1_amd64.buildinfo ebecb55fa45b7fcd2fd2edae3bfe1f9d 17256 perl optional libperlio-gzip-perl_0.20-1_amd64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libperlio-gzip-perl_0.20-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libperlio-gzip-perl_0.20-1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/libperlio-gzip-perl_0.20-1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/libperlio-gzip-perl_0.20-1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/amd64/libperlio-gzip-perl_0.20-1_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libperlio-gzip-perl_0.20-1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-09-16 05:39:40.047801522 +0000 +++ b2/build.log 2025-09-16 05:40:19.447850807 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Mon Oct 19 00:00:18 -12 2026 -I: pbuilder-time-stamp: 1792411218 +I: Current time: Tue Sep 16 19:39:41 +14 2025 +I: pbuilder-time-stamp: 1758001181 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -22,53 +22,85 @@ dpkg-source: info: unpacking libperlio-gzip-perl_0.20-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3417926/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D01_modify_environment starting +debug: Running on ionos1-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Sep 16 05:39 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='amd64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=40 ' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='97495404a0b84f48907302d7afa4133e' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3417926' - PS1='# ' - PS2='> ' + INVOCATION_ID=15137a2135ed40bb9f4c18902251b109 + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=3317270 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_5z2B --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1 --logfile b1/build.log libperlio-gzip-perl_0.20-1.dsc' - SUDO_GID='111' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='106' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/pbuilderrc_AeUN --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2 --logfile b2/build.log libperlio-gzip-perl_0.20-1.dsc' + SUDO_GID=110 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=105 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos15-amd64 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.12.43+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.43-1 (2025-08-27) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3417926/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -140,7 +172,7 @@ Get: 29 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 libperl-dev amd64 5.40.1-6 [1109 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.1-1+b1 [920 kB] -Fetched 13.2 MB in 7s (1855 kB/s) +Fetched 13.2 MB in 0s (129 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19917 files and directories currently installed.) @@ -284,7 +316,11 @@ fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libperlio-gzip-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libperlio-gzip-perl_0.20-1_source.changes +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libperlio-gzip-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libperlio-gzip-perl_0.20-1_source.changes dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.20-1 dpkg-buildpackage: info: source distribution unstable @@ -306,10 +342,10 @@ Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j42 + make -j40 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' -Running Mkbootstrap for gzip () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' gzip.xs > gzip.xsc +Running Mkbootstrap for gzip () chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 cp gzip.pm blib/lib/PerlIO/gzip.pm @@ -323,7 +359,7 @@ Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' dh_auto_test - make -j42 test TEST_VERBOSE=1 + make -j40 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t @@ -663,7 +699,7 @@ ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it -ok 18 - open >:gzip [about to write 129736 bytes] +ok 18 - open >:gzip [about to write 1380656 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip @@ -732,7 +768,7 @@ ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it -ok 83 - open >:unix:gzip [about to write 129736 bytes] +ok 83 - open >:unix:gzip [about to write 1380656 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip @@ -801,7 +837,7 @@ ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it -ok 148 - open >:stdio:gzip [about to write 129736 bytes] +ok 148 - open >:stdio:gzip [about to write 1380656 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip @@ -870,7 +906,7 @@ ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it -ok 213 - open >:perlio:gzip [about to write 129736 bytes] +ok 213 - open >:perlio:gzip [about to write 1380656 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip @@ -924,13 +960,13 @@ ok 260 - close it ok All tests successful. -Files=2, Tests=561, 0 wallclock secs ( 0.06 usr 0.03 sys + 0.40 cusr 0.04 csys = 0.53 CPU) +Files=2, Tests=561, 1 wallclock secs ( 0.06 usr 0.02 sys + 0.76 cusr 0.03 csys = 0.87 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libperlio-gzip-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libperlio-gzip-perl/ - make -j42 install DESTDIR=/build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j40 install DESTDIR=/build/reproducible-path/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document @@ -960,8 +996,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb'. dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.20-1_amd64.deb'. +dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.buildinfo dpkg-genchanges --build=binary -O../libperlio-gzip-perl_0.20-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -969,12 +1005,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/3317270/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3417926 and its subdirectories -I: Current time: Mon Oct 19 00:02:38 -12 2026 -I: pbuilder-time-stamp: 1792411358 +I: removing directory /srv/workspace/pbuilder/3317270 and its subdirectories +I: Current time: Tue Sep 16 19:40:19 +14 2025 +I: pbuilder-time-stamp: 1758001219 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libperlio-gzip-perl_0.20-1.diff: 69.0% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libperlio-gzip-perl_0.20-1.diff.gz b2/build.log: 77.7% -- replaced with stdout Compressing the 1st log... b1/build.log: 78.3% -- replaced with stdout Tue Sep 16 05:40:20 UTC 2025 I: diffoscope 306 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libperlio-gzip-perl_unstable_amd64_1758001220 + touch /var/log/reproducible-builds/diffoscope_stamp_libperlio-gzip-perl_unstable_amd64_1758001220 + RESULT=0 + systemd-run '--description=diffoscope on libperlio-gzip-perl/0.20-1 in unstable/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_20-67966 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty --run-session -c jenkins-reproducible-unstable-diffoscope-f03aa797-bfad-46dd-97c4-cbdcdf30c1bb -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/dbd-tmp-wQLn1uQ ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/libperlio-gzip-perl_0.20-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/libperlio-gzip-perl_0.20-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/libperlio-gzip-perl_0.20-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1/libperlio-gzip-perl_0.20-1_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2/libperlio-gzip-perl_0.20-1_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_20-67966.service; invocation ID: d689e71c4a224d4fa0c94eb48e2037f3 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/libperlio-gzip-perl_0.20-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/libperlio-gzip-perl_0.20-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/libperlio-gzip-perl_0.20-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b1/libperlio-gzip-perl_0.20-1_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.UhCAntty/b2/libperlio-gzip-perl_0.20-1_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.002s) 0.002s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 235ms CPU time consumed: 172ms Memory peak: 18.2M (swap: 0B) _ _ _ _ _ _ | (_) |__ _ __ ___ _ __| (_) ___ __ _ ___(_)_ __ _ __ ___ | | | '_ \| '_ \ / _ \ '__| | |/ _ \ _____ / _` |_ / | '_ \ _____| '_ \ / _ \ | | | |_) | |_) | __/ | | | | (_) |_____| (_| |/ /| | |_) |_____| |_) | __/ |_|_|_.__/| .__/ \___|_| |_|_|\___/ \__, /___|_| .__/ | .__/ \___| |_| |___/ |_| |_| _ _ __| | | '__| | | | | | |_| |_| Tue Sep 16 05:50:31 UTC 2025 I: diffoscope 306 found no differences in the changes files, and a .buildinfo file also exists. Tue Sep 16 05:50:31 UTC 2025 I: libperlio-gzip-perl from unstable built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-09-16 05:50:32] INFO: Starting at 2025-09-16 05:50:32.092693 [2025-09-16 05:50:32] INFO: Generating the pages of 1 package(s) [2025-09-16 05:50:32] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/amd64/libperlio-gzip-perl didn't produce a buildlog, even though it has been built. [2025-09-16 05:50:32] INFO: Finished at 2025-09-16 05:50:32.620131, took: 0:00:00.527444 Tue Sep 16 05:50:32 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/amd64/libperlio-gzip-perl.html Tue Sep 16 05:50:32 UTC 2025 I: Removing signed libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc files: removed './b1/libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc' removed './b2/libperlio-gzip-perl_0.20-1_amd64.buildinfo.asc' 1758001832 amd64 unstable libperlio-gzip-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libperlio-gzip-perl_0.20-1.rbuild.log: 74.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libperlio-gzip-perl_0.20-1.rbuild.log.gz [2025-09-16 05:50:34] INFO: Starting at 2025-09-16 05:50:34.063332 [2025-09-16 05:50:34] INFO: Generating the pages of 1 package(s) [2025-09-16 05:50:34] INFO: Finished at 2025-09-16 05:50:34.524980, took: 0:00:00.461654 All cleanup done. Tue Sep 16 05:50:34 UTC 2025 - total duration: 0h 13m 20s. Tue Sep 16 05:50:34 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-r4PpYHr1, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 13min 23.645s CPU time consumed: 4.683s Memory peak: 38.8M (swap: 0B)