Running as unit: rb-build-amd64_30-21381.service ==================================================================================== Fri Sep 27 15:13:42 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_30) on jenkins, called using "ionos15-amd64 ionos1-amd64" as arguments. Fri Sep 27 15:13:42 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-eetZ2XKr" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 27 15:13:42 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos15-amd64.debian.net is marked as down. Fri Sep 27 15:13:42 UTC 2024 - checking via ssh if ionos15-amd64.debian.net is up. removed '/tmp/read-only-fs-test-80Wb50' Fri Sep 27 15:13:43 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Fri Sep 27 15:13:43 UTC 2024 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-P1sbdo' ok, let's check if gff2aplot is building anywhere yet… ok, gff2aplot is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of gff2aplot in trixie on amd64 on jenkins now. 1st build will be done on ionos15-amd64.debian.net. 2nd build will be done on ionos1-amd64.debian.net. ============================================================================= Fri Sep 27 15:14:05 UTC 2024 I: starting to build gff2aplot/trixie/amd64 on jenkins on '2024-09-27 15:13' Fri Sep 27 15:14:05 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_30/21381/console.log 1727450045 amd64 trixie gff2aplot Fri Sep 27 15:14:05 UTC 2024 I: Downloading source for trixie/gff2aplot=2.0-15 --2024-09-27 15:14:05-- http://deb.debian.org/debian/pool/main/g/gff2aplot/gff2aplot_2.0-15.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2044 (2.0K) [text/prs.lines.tag] Saving to: ‘gff2aplot_2.0-15.dsc’ 0K . 100% 294M=0s 2024-09-27 15:14:05 (294 MB/s) - ‘gff2aplot_2.0-15.dsc’ saved [2044/2044] --2024-09-27 15:14:05-- http://deb.debian.org/debian/pool/main/g/gff2aplot/gff2aplot_2.0-15.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2044 (2.0K) [text/prs.lines.tag] Saving to: ‘gff2aplot_2.0-15.dsc’ 0K . 100% 294M=0s 2024-09-27 15:14:05 (294 MB/s) - ‘gff2aplot_2.0-15.dsc’ saved [2044/2044] Fri Sep 27 15:14:06 UTC 2024 I: gff2aplot_2.0-15.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: gff2aplot Binary: gff2aplot Architecture: any Version: 2.0-15 Maintainer: Debian Med Packaging Team Uploaders: Andreas Tille Homepage: https://genome.crg.es/software/gfftools/GFF2APLOT.html Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/med-team/gff2aplot Vcs-Git: https://salsa.debian.org/med-team/gff2aplot.git Testsuite: autopkgtest Testsuite-Triggers: ghostscript, graphicsmagick, imagemagick Build-Depends: debhelper-compat (= 13) Package-List: gff2aplot deb science optional arch=any Checksums-Sha1: 469f99901a437f8b539b8b29be9cb0f392d6633b 328439 gff2aplot_2.0.orig.tar.gz 7f336c40811459aceb3ad0fbb2a81048732612a3 20764 gff2aplot_2.0-15.debian.tar.xz Checksums-Sha256: 33798a1f2877fc9d64aaf143c2e5bb909021b1f147c6718e61fbcc96cc65ccc3 328439 gff2aplot_2.0.orig.tar.gz 341ed9d8a0f8cf26c7c28cfad34cdc49e59230d16d8dc6afd3b9ecfd2ad5cbe7 20764 gff2aplot_2.0-15.debian.tar.xz Files: 8b269e236bcbacb1c70e4a3424940dc6 328439 gff2aplot_2.0.orig.tar.gz 53d9a4f53d588d060b186aa6226a687f 20764 gff2aplot_2.0-15.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCgAvFiEE8fAHMgoDVUHwpmPKV4oElNHGRtEFAmXAyPkRHHRpbGxlQGRl Ymlhbi5vcmcACgkQV4oElNHGRtFfeQ/9FZfoiO4smc+53Q0Ezfb3fword/HVh/IR ggXK4Ki8h4AF0PHpAbWgSSD6mn1V3MnPw5yR2etGPeSSmHouK16GTNih1VK1J6Fm k3YtNWiJo5u87yJTpl9MLblhwf1OpBxty4FBVVHIKmOZe39dyKnvP/kidzvLP6OL P68MUqlHUVVqVaZVn/IuSZvAJgYW+XMrIGbgC/AkOHw0My8oZUcizBsUODiVPqQ3 C07LxsWzgxY4IGRzUEBQ+YYWogxxgyG4yXaXrCw9klDKoHKcCdtp2scA4fLKMsgb CbxhCHjt0B/7k+gVIceZYWejymIYF4ANLcTcFyrtQYjTmpfc8LptUIMxvoUC1WXD CX8yO+KyhRWPjj82m10IPXSDc6ZWTa/tszqEdMzaeT6Zuf4UTF/LMaCLhqZDS6cb vQwH+6RBF9Y3zXz4VJx8ux3B22QsgOYUTQi8yl6hWnM4SPiJj0WqW4e3lVp3W7yf bocCC2UBjg63fgJGpjXSt2AjzNf62IZG9flWRtw8l830GSOWt15Eb+q3WhK7dPmO q6LxzyJOhoCfx9SRTQSPq7rqRmJlXstVs/F0V/6bC9kYzf1jlN+ITUCmuf7m5zzL ELprqaA6vyeD2Zgvd7/kj7tNpZ09n9mSKT29OuH5ZCdRR8X/4s1ccCg70SMtO9Cr WLGbwv3ljTw= =Z4Vx -----END PGP SIGNATURE----- Fri Sep 27 15:14:06 UTC 2024 I: Checking whether the package is not for us Fri Sep 27 15:14:06 UTC 2024 I: Starting 1st build on remote node ionos15-amd64.debian.net. Fri Sep 27 15:14:06 UTC 2024 I: Preparing to do remote build '1' on ionos15-amd64.debian.net. Fri Sep 27 15:14:06 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos15-amd64.debian.net is marked as down. Fri Sep 27 15:14:06 UTC 2024 - checking via ssh if ionos15-amd64.debian.net is up. removed '/tmp/read-only-fs-test-nqSpEe' ==================================================================================== Thu Oct 30 21:37:07 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos15-amd64, called using "1 gff2aplot trixie /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf 2.0-15" as arguments. Thu Oct 30 21:37:07 UTC 2025 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-1BqZnRZh" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Oct 30 21:37:07 UTC 2025 I: Downloading source for trixie/gff2aplot=2.0-15 Reading package lists... NOTICE: 'gff2aplot' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/gff2aplot.git Please use: git clone https://salsa.debian.org/med-team/gff2aplot.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 351 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (dsc) [2044 B] Get:2 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (tar) [328 kB] Get:3 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (diff) [20.8 kB] Fetched 351 kB in 0s (28.7 MB/s) Download complete and in download only mode Reading package lists... NOTICE: 'gff2aplot' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/gff2aplot.git Please use: git clone https://salsa.debian.org/med-team/gff2aplot.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 351 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (dsc) [2044 B] Get:2 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (tar) [328 kB] Get:3 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (diff) [20.8 kB] Fetched 351 kB in 0s (28.7 MB/s) Download complete and in download only mode ============================================================================= Building gff2aplot in trixie on amd64 on ionos15-amd64 now. Date: Thu Oct 30 21:37:07 UTC 2025 Date UTC: Thu Oct 30 21:37:07 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Oct 30 09:37:07 -12 2025 I: pbuilder-time-stamp: 1761860227 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [gff2aplot_2.0-15.dsc] I: copying [./gff2aplot_2.0.orig.tar.gz] I: copying [./gff2aplot_2.0-15.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Feb 5 11:39:37 2024 gpgv: using RSA key F1F007320A035541F0A663CA578A0494D1C646D1 gpgv: issuer "tille@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./gff2aplot_2.0-15.dsc: no acceptable signature found dpkg-source: info: extracting gff2aplot in gff2aplot-2.0 dpkg-source: info: unpacking gff2aplot_2.0.orig.tar.gz dpkg-source: info: unpacking gff2aplot_2.0-15.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying non_lexical_loop_iterator.patch dpkg-source: info: applying 02-blat2gff.diff dpkg-source: info: applying 03-parseblast.diff dpkg-source: info: applying use-dpkg-buildflags.patch dpkg-source: info: applying mayhem.patch dpkg-source: info: applying fis-privacy-breach.patch dpkg-source: info: applying perl_5.28.patch dpkg-source: info: applying fix_install_ali2gff.patch dpkg-source: info: applying enhance_sprintf_buffer.patch dpkg-source: info: applying fix_README_used_for_test.patch dpkg-source: info: applying fix_gff_comments.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1064325/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='e12b7e684c7b43cea237282f71160919' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1064325' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_j6AO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1 --logfile b1/build.log gff2aplot_2.0-15.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.10.6+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.10.6-1~bpo12+1 (2024-08-26) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1064325/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19788 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 19.8 MB of archives. After unpacking 75.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-8 [97.3 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b3 [692 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Fetched 19.8 MB in 0s (52.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19788 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_amd64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/gff2aplot-2.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../gff2aplot_2.0-15_source.changes dpkg-buildpackage: info: source package gff2aplot dpkg-buildpackage: info: source version 2.0-15 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' rm -f src/ali2gff/ali2gff bin/* make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j42 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### ### RUNNING MAKEFILE ### ### Finishing PERL script from "src/gff2aplot.pl" -> "bin/gff2aplot.pl" ### Thu Oct 30 21:37:28 2025 -- pbuilder1 ### ### Finishing PERL script from "src/parseblast.pl" -> "bin/parseblast.pl" ### Finishing PERL script from "src/blat2gff.pl" -> "bin/blat2gff.pl" ### Finishing PERL script from "src/sim2gff.pl" -> "bin/sim2gff.pl" ### Making ALI2GFF... ### ### MAKEFILE DONE... make[2]: Entering directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' ### ali2gff.c: In function 'main': ali2gff.c:88:15: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] 88 | char *ptr; | ^~~ ali2gff.c: In function 'processMumfile': ali2gff.c:527:86: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 527 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:527:92: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 527 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:768:86: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 768 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:768:92: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 768 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c: In function 'processGFFfile': ali2gff.c:355:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 355 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\n", xName,yName,source,xb,yb,xe,ye,scores,strands,frames); | ^~ ~~~~~ In file included from /usr/include/stdio.h:970, from ali2gff.h:20, from ali2gff.c:64: In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:355:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:354:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 354 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\n",xName,yName,source,xb,yb,xe,ye,score ,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:354:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:351:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 351 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\t%s", xName,yName,source,xb,yb,xe,ye,scores,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:351:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:350:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 350 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\t%s",xName,yName,source,xb,yb,xe,ye,score ,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:350:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:300:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 300 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\n", yName,xName,source,yb,xb,ye,xe,scores,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:300:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:299:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 299 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\n",yName,xName,source,yb,xb,ye,xe,score,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:299:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:296:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 296 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\t%s", yName,xName,source,yb,xb,ye,xe,scores,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:296:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:295:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 295 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\t%s",yName,xName,source,yb,xb,ye,xe,score,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:295:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processMumfile': ali2gff.c:732:40: warning: 'score' may be used uninitialized [-Wmaybe-uninitialized] 732 | score = (score - errCount)/score; // match percentage | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:420:15: note: 'score' was declared here 420 | float score; | ^~~~~ ali2gff.c:840:67: warning: 'fxb' may be used uninitialized [-Wmaybe-uninitialized] 840 | fxe = fxb + flen - 1; | ~~~~^~~~~~ ali2gff.c:421:27: note: 'fxb' was declared here 421 | unsigned long int fxb, fxe, fyb, fye; // start and end positions of gaps resp. fragments of gaps | ^~~ ali2gff.c:841:67: warning: 'fyb' may be used uninitialized [-Wmaybe-uninitialized] 841 | fye = fyb + flen - 1; | ~~~~^~~~~~ ali2gff.c:421:37: note: 'fyb' was declared here 421 | unsigned long int fxb, fxe, fyb, fye; // start and end positions of gaps resp. fragments of gaps | ^~~ ali2gff.c: In function 'processSimfile': ali2gff.c:1064:36: warning: 'xseqLen_4' may be used uninitialized [-Wmaybe-uninitialized] 1064 | if (!opt_i || ((xe - xb < xseqLen_4) && (ye - yb < yseqLen_4))) { | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:997:27: note: 'xseqLen_4' was declared here 997 | unsigned long int xseqLen_4; /* length of x sequence -5 */ | ^~~~~~~~~ ali2gff.c:1064:62: warning: 'yseqLen_4' may be used uninitialized [-Wmaybe-uninitialized] 1064 | if (!opt_i || ((xe - xb < xseqLen_4) && (ye - yb < yseqLen_4))) { | ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:998:27: note: 'yseqLen_4' was declared here 998 | unsigned long int yseqLen_4; /* length of y sequence -5 */ | ^~~~~~~~~ ali2gff.c: In function 'main': ali2gff.c:135:9: warning: '__builtin_strncpy' specified bound 1000 equals destination size [-Wstringop-truncation] 135 | strncpy(infile,argv[1],MAXSTRING); | ^ make[2]: Leaving directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' mkdir -p ./bin cp ./src/ali2gff/ali2gff \ ./bin/ali2gff mode of 'bin/gff2aplot.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/parseblast.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/blat2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/sim2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_auto_test make -j42 test make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### SORRY !!! Tests were not implemented yet... make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' for script in `find bin -name "*.pl"` ; do mv $script bin/`basename $script .pl` ; done make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_install dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' dh_installexamples # Fix path names, silence GS find debian/*/usr/share/doc/*/examples -name README -exec sed -i \ -e 's?^$BIN/\([0-9a-z]\+\)\.pl?\1?' \ -e 's?^$BIN/\([0-9a-z]\+\) ?\1 ?' \ -e 's?^GS=.*;?GS="gs -q" ;?' \{\} \; make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'gff2aplot' in '../gff2aplot_2.0-15_amd64.deb'. dpkg-deb: building package 'gff2aplot-dbgsym' in '../gff2aplot-dbgsym_2.0-15_amd64.deb'. dpkg-genbuildinfo --build=binary -O../gff2aplot_2.0-15_amd64.buildinfo dpkg-genchanges --build=binary -O../gff2aplot_2.0-15_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1064325 and its subdirectories I: Current time: Thu Oct 30 09:37:33 -12 2025 I: pbuilder-time-stamp: 1761860253 Thu Oct 30 21:37:33 UTC 2025 I: Signing ./b1/gff2aplot_2.0-15_amd64.buildinfo as gff2aplot_2.0-15_amd64.buildinfo.asc Thu Oct 30 21:37:33 UTC 2025 I: Signed ./b1/gff2aplot_2.0-15_amd64.buildinfo as ./b1/gff2aplot_2.0-15_amd64.buildinfo.asc Thu Oct 30 21:37:33 UTC 2025 - build #1 for gff2aplot/trixie/amd64 on ionos15-amd64 done. Starting cleanup. All cleanup done. Thu Oct 30 21:37:33 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-1BqZnRZh, removing. /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 15:14 b1 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 15:14 b2 -rw-r--r-- 1 jenkins jenkins 2044 Feb 5 2024 gff2aplot_2.0-15.dsc -rw------- 1 jenkins jenkins 3151 Sep 27 15:14 rbuildlog.BaoiRm3 /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1: total 356 -rw-r--r-- 1 jenkins jenkins 36171 Sep 27 15:14 build.log -rw-r--r-- 1 jenkins jenkins 24932 Sep 27 15:14 gff2aplot-dbgsym_2.0-15_amd64.deb -rw-r--r-- 1 jenkins jenkins 20764 Sep 27 15:14 gff2aplot_2.0-15.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2044 Sep 27 15:14 gff2aplot_2.0-15.dsc -rw-r--r-- 1 jenkins jenkins 4891 Sep 27 15:14 gff2aplot_2.0-15_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 5773 Sep 27 15:14 gff2aplot_2.0-15_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1413 Sep 27 15:14 gff2aplot_2.0-15_amd64.changes -rw-r--r-- 1 jenkins jenkins 244092 Sep 27 15:14 gff2aplot_2.0-15_amd64.deb -rw-r--r-- 1 jenkins jenkins 1259 Sep 27 15:14 gff2aplot_2.0-15_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2: total 0 Fri Sep 27 15:14:33 UTC 2024 I: Deleting $TMPDIR on ionos15-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Oct 30 09:37:07 -12 2025 I: pbuilder-time-stamp: 1761860227 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [gff2aplot_2.0-15.dsc] I: copying [./gff2aplot_2.0.orig.tar.gz] I: copying [./gff2aplot_2.0-15.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Feb 5 11:39:37 2024 gpgv: using RSA key F1F007320A035541F0A663CA578A0494D1C646D1 gpgv: issuer "tille@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./gff2aplot_2.0-15.dsc: no acceptable signature found dpkg-source: info: extracting gff2aplot in gff2aplot-2.0 dpkg-source: info: unpacking gff2aplot_2.0.orig.tar.gz dpkg-source: info: unpacking gff2aplot_2.0-15.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying non_lexical_loop_iterator.patch dpkg-source: info: applying 02-blat2gff.diff dpkg-source: info: applying 03-parseblast.diff dpkg-source: info: applying use-dpkg-buildflags.patch dpkg-source: info: applying mayhem.patch dpkg-source: info: applying fis-privacy-breach.patch dpkg-source: info: applying perl_5.28.patch dpkg-source: info: applying fix_install_ali2gff.patch dpkg-source: info: applying enhance_sprintf_buffer.patch dpkg-source: info: applying fix_README_used_for_test.patch dpkg-source: info: applying fix_gff_comments.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1064325/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='e12b7e684c7b43cea237282f71160919' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1064325' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_j6AO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1 --logfile b1/build.log gff2aplot_2.0-15.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.10.6+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.10.6-1~bpo12+1 (2024-08-26) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1064325/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19788 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 19.8 MB of archives. After unpacking 75.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-8 [97.3 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b3 [692 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Fetched 19.8 MB in 0s (52.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19788 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_amd64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/gff2aplot-2.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../gff2aplot_2.0-15_source.changes dpkg-buildpackage: info: source package gff2aplot dpkg-buildpackage: info: source version 2.0-15 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' rm -f src/ali2gff/ali2gff bin/* make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j42 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### ### RUNNING MAKEFILE ### ### Finishing PERL script from "src/gff2aplot.pl" -> "bin/gff2aplot.pl" ### Thu Oct 30 21:37:28 2025 -- pbuilder1 ### ### Finishing PERL script from "src/parseblast.pl" -> "bin/parseblast.pl" ### Finishing PERL script from "src/blat2gff.pl" -> "bin/blat2gff.pl" ### Finishing PERL script from "src/sim2gff.pl" -> "bin/sim2gff.pl" ### Making ALI2GFF... ### ### MAKEFILE DONE... make[2]: Entering directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' ### ali2gff.c: In function 'main': ali2gff.c:88:15: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] 88 | char *ptr; | ^~~ ali2gff.c: In function 'processMumfile': ali2gff.c:527:86: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 527 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:527:92: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 527 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:768:86: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 768 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:768:92: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 768 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c: In function 'processGFFfile': ali2gff.c:355:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 355 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\n", xName,yName,source,xb,yb,xe,ye,scores,strands,frames); | ^~ ~~~~~ In file included from /usr/include/stdio.h:970, from ali2gff.h:20, from ali2gff.c:64: In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:355:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:354:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 354 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\n",xName,yName,source,xb,yb,xe,ye,score ,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:354:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:351:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 351 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\t%s", xName,yName,source,xb,yb,xe,ye,scores,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:351:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:350:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 350 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\t%s",xName,yName,source,xb,yb,xe,ye,score ,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:350:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:300:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 300 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\n", yName,xName,source,yb,xb,ye,xe,scores,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:300:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:299:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 299 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\n",yName,xName,source,yb,xb,ye,xe,score,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:299:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:296:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 296 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\t%s", yName,xName,source,yb,xb,ye,xe,scores,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:296:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:295:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 295 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\t%s",yName,xName,source,yb,xb,ye,xe,score,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:295:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processMumfile': ali2gff.c:732:40: warning: 'score' may be used uninitialized [-Wmaybe-uninitialized] 732 | score = (score - errCount)/score; // match percentage | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:420:15: note: 'score' was declared here 420 | float score; | ^~~~~ ali2gff.c:840:67: warning: 'fxb' may be used uninitialized [-Wmaybe-uninitialized] 840 | fxe = fxb + flen - 1; | ~~~~^~~~~~ ali2gff.c:421:27: note: 'fxb' was declared here 421 | unsigned long int fxb, fxe, fyb, fye; // start and end positions of gaps resp. fragments of gaps | ^~~ ali2gff.c:841:67: warning: 'fyb' may be used uninitialized [-Wmaybe-uninitialized] 841 | fye = fyb + flen - 1; | ~~~~^~~~~~ ali2gff.c:421:37: note: 'fyb' was declared here 421 | unsigned long int fxb, fxe, fyb, fye; // start and end positions of gaps resp. fragments of gaps | ^~~ ali2gff.c: In function 'processSimfile': ali2gff.c:1064:36: warning: 'xseqLen_4' may be used uninitialized [-Wmaybe-uninitialized] 1064 | if (!opt_i || ((xe - xb < xseqLen_4) && (ye - yb < yseqLen_4))) { | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:997:27: note: 'xseqLen_4' was declared here 997 | unsigned long int xseqLen_4; /* length of x sequence -5 */ | ^~~~~~~~~ ali2gff.c:1064:62: warning: 'yseqLen_4' may be used uninitialized [-Wmaybe-uninitialized] 1064 | if (!opt_i || ((xe - xb < xseqLen_4) && (ye - yb < yseqLen_4))) { | ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:998:27: note: 'yseqLen_4' was declared here 998 | unsigned long int yseqLen_4; /* length of y sequence -5 */ | ^~~~~~~~~ ali2gff.c: In function 'main': ali2gff.c:135:9: warning: '__builtin_strncpy' specified bound 1000 equals destination size [-Wstringop-truncation] 135 | strncpy(infile,argv[1],MAXSTRING); | ^ make[2]: Leaving directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' mkdir -p ./bin cp ./src/ali2gff/ali2gff \ ./bin/ali2gff mode of 'bin/gff2aplot.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/parseblast.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/blat2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/sim2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_auto_test make -j42 test make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### SORRY !!! Tests were not implemented yet... make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' for script in `find bin -name "*.pl"` ; do mv $script bin/`basename $script .pl` ; done make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_install dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' dh_installexamples # Fix path names, silence GS find debian/*/usr/share/doc/*/examples -name README -exec sed -i \ -e 's?^$BIN/\([0-9a-z]\+\)\.pl?\1?' \ -e 's?^$BIN/\([0-9a-z]\+\) ?\1 ?' \ -e 's?^GS=.*;?GS="gs -q" ;?' \{\} \; make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'gff2aplot' in '../gff2aplot_2.0-15_amd64.deb'. dpkg-deb: building package 'gff2aplot-dbgsym' in '../gff2aplot-dbgsym_2.0-15_amd64.deb'. dpkg-genbuildinfo --build=binary -O../gff2aplot_2.0-15_amd64.buildinfo dpkg-genchanges --build=binary -O../gff2aplot_2.0-15_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1064325 and its subdirectories I: Current time: Thu Oct 30 09:37:33 -12 2025 I: pbuilder-time-stamp: 1761860253 Fri Sep 27 15:14:34 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos1-amd64.debian.net. Fri Sep 27 15:14:34 UTC 2024 I: Preparing to do remote build '2' on ionos1-amd64.debian.net. Fri Sep 27 15:14:34 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Fri Sep 27 15:14:34 UTC 2024 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-WEyCzX' ==================================================================================== Fri Sep 27 15:14:35 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos1-amd64, called using "2 gff2aplot trixie /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf 2.0-15" as arguments. Fri Sep 27 15:14:35 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-CcnYoENd" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 27 15:14:35 UTC 2024 I: Downloading source for trixie/gff2aplot=2.0-15 Reading package lists... NOTICE: 'gff2aplot' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/gff2aplot.git Please use: git clone https://salsa.debian.org/med-team/gff2aplot.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 351 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (dsc) [2044 B] Get:2 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (tar) [328 kB] Get:3 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (diff) [20.8 kB] Fetched 351 kB in 0s (12.6 MB/s) Download complete and in download only mode Reading package lists... NOTICE: 'gff2aplot' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/gff2aplot.git Please use: git clone https://salsa.debian.org/med-team/gff2aplot.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 351 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (dsc) [2044 B] Get:2 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (tar) [328 kB] Get:3 http://deb.debian.org/debian trixie/main gff2aplot 2.0-15 (diff) [20.8 kB] Fetched 351 kB in 0s (12.6 MB/s) Download complete and in download only mode ============================================================================= Re-Building gff2aplot in trixie on amd64 on ionos1-amd64 now. Date: Fri Sep 27 15:14:36 UTC 2024 Date UTC: Fri Sep 27 15:14:36 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_6QmA + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' gff2aplot = debian-installer -o gff2aplot = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' gff2aplot = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_6QmA --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2 --logfile b2/build.log gff2aplot_2.0-15.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Sat Sep 28 05:14:36 +14 2024 I: pbuilder-time-stamp: 1727450076 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [gff2aplot_2.0-15.dsc] I: copying [./gff2aplot_2.0.orig.tar.gz] I: copying [./gff2aplot_2.0-15.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Feb 5 11:39:37 2024 gpgv: using RSA key F1F007320A035541F0A663CA578A0494D1C646D1 gpgv: issuer "tille@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./gff2aplot_2.0-15.dsc: no acceptable signature found dpkg-source: info: extracting gff2aplot in gff2aplot-2.0 dpkg-source: info: unpacking gff2aplot_2.0.orig.tar.gz dpkg-source: info: unpacking gff2aplot_2.0-15.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying non_lexical_loop_iterator.patch dpkg-source: info: applying 02-blat2gff.diff dpkg-source: info: applying 03-parseblast.diff dpkg-source: info: applying use-dpkg-buildflags.patch dpkg-source: info: applying mayhem.patch dpkg-source: info: applying fis-privacy-breach.patch dpkg-source: info: applying perl_5.28.patch dpkg-source: info: applying fix_install_ali2gff.patch dpkg-source: info: applying enhance_sprintf_buffer.patch dpkg-source: info: applying fix_README_used_for_test.patch dpkg-source: info: applying fix_gff_comments.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D01_modify_environment starting debug: Running on ionos1-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Sep 27 15:14 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=626cbf054d50408a83c553884f032a1b LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2038874 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_6QmA --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2 --logfile b2/build.log gff2aplot_2.0-15.dsc' SUDO_GID=110 SUDO_UID=105 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-25-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19783 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 19.8 MB of archives. After unpacking 75.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-8 [97.3 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b3 [692 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Fetched 19.8 MB in 1s (18.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19783 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_amd64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/gff2aplot-2.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../gff2aplot_2.0-15_source.changes dpkg-buildpackage: info: source package gff2aplot dpkg-buildpackage: info: source version 2.0-15 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' rm -f src/ali2gff/ali2gff bin/* make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j20 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### ### RUNNING MAKEFILE ### ### Fri Sep 27 15:16:02 2024 -- pbuilder2 ### Finishing PERL script from "src/gff2aplot.pl" -> "bin/gff2aplot.pl" ### ### Finishing PERL script from "src/parseblast.pl" -> "bin/parseblast.pl" ### Finishing PERL script from "src/blat2gff.pl" -> "bin/blat2gff.pl" ### Finishing PERL script from "src/sim2gff.pl" -> "bin/sim2gff.pl" ### Making ALI2GFF... make[2]: Entering directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' ### ### MAKEFILE DONE... ### ali2gff.c: In function 'main': ali2gff.c:88:15: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] 88 | char *ptr; | ^~~ ali2gff.c: In function 'processMumfile': ali2gff.c:527:86: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 527 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:527:92: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 527 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:768:86: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 768 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c:768:92: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 768 | if (DEBUG) fprintf(stderr,"gap data: length %d-20=%d\n%s\n%s\n%s\n",strlen(seq1),strlen(seq1)-20,seq1,seq2,err); | ~^ ~~~~~~~~~~~~~~~ | | | | int size_t {aka long unsigned int} | %ld ali2gff.c: In function 'processGFFfile': ali2gff.c:355:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 355 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\n", xName,yName,source,xb,yb,xe,ye,scores,strands,frames); | ^~ ~~~~~ In file included from /usr/include/stdio.h:970, from ali2gff.h:20, from ali2gff.c:64: In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:355:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:354:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 354 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\n",xName,yName,source,xb,yb,xe,ye,score ,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:354:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:351:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 351 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\t%s", xName,yName,source,xb,yb,xe,ye,scores,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:351:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:350:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 350 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\t%s",xName,yName,source,xb,yb,xe,ye,score ,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:350:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:300:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 300 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\n", yName,xName,source,yb,xb,ye,xe,scores,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:300:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:299:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 299 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\n",yName,xName,source,yb,xb,ye,xe,score,strands,frames); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:299:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:296:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 296 | else sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%s\t%s\t%s\t%s", yName,xName,source,yb,xb,ye,xe,scores,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:296:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 25 or more bytes (assuming 4028) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processGFFfile': ali2gff.c:295:113: warning: '%s' directive writing up to 999 bytes into a region of size between 0 and 999 [-Wformat-overflow=] 295 | if (sscanf(scores,"%f",&score) == 1) sprintf(aliPrintString,"%s:%s\t%s\talignment\t%lu:%lu\t%lu:%lu\t%5.3f\t%s\t%s\t%s",yName,xName,source,yb,xb,ye,xe,score,strands,frames,cptr); | ^~ ~~~~~ In function 'sprintf', inlined from 'processGFFfile' at ali2gff.c:295:44: /usr/include/x86_64-linux-gnu/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output 30 or more bytes (assuming 2034) into a destination of size 1000 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ ali2gff.c: In function 'processMumfile': ali2gff.c:732:40: warning: 'score' may be used uninitialized [-Wmaybe-uninitialized] 732 | score = (score - errCount)/score; // match percentage | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:420:15: note: 'score' was declared here 420 | float score; | ^~~~~ ali2gff.c:840:67: warning: 'fxb' may be used uninitialized [-Wmaybe-uninitialized] 840 | fxe = fxb + flen - 1; | ~~~~^~~~~~ ali2gff.c:421:27: note: 'fxb' was declared here 421 | unsigned long int fxb, fxe, fyb, fye; // start and end positions of gaps resp. fragments of gaps | ^~~ ali2gff.c:841:67: warning: 'fyb' may be used uninitialized [-Wmaybe-uninitialized] 841 | fye = fyb + flen - 1; | ~~~~^~~~~~ ali2gff.c:421:37: note: 'fyb' was declared here 421 | unsigned long int fxb, fxe, fyb, fye; // start and end positions of gaps resp. fragments of gaps | ^~~ ali2gff.c: In function 'processSimfile': ali2gff.c:1064:36: warning: 'xseqLen_4' may be used uninitialized [-Wmaybe-uninitialized] 1064 | if (!opt_i || ((xe - xb < xseqLen_4) && (ye - yb < yseqLen_4))) { | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:997:27: note: 'xseqLen_4' was declared here 997 | unsigned long int xseqLen_4; /* length of x sequence -5 */ | ^~~~~~~~~ ali2gff.c:1064:62: warning: 'yseqLen_4' may be used uninitialized [-Wmaybe-uninitialized] 1064 | if (!opt_i || ((xe - xb < xseqLen_4) && (ye - yb < yseqLen_4))) { | ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ali2gff.c:998:27: note: 'yseqLen_4' was declared here 998 | unsigned long int yseqLen_4; /* length of y sequence -5 */ | ^~~~~~~~~ ali2gff.c: In function 'main': ali2gff.c:135:9: warning: '__builtin_strncpy' specified bound 1000 equals destination size [-Wstringop-truncation] 135 | strncpy(infile,argv[1],MAXSTRING); | ^ make[2]: Leaving directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' mkdir -p ./bin cp ./src/ali2gff/ali2gff \ ./bin/ali2gff mode of 'bin/gff2aplot.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/parseblast.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/blat2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) mode of 'bin/sim2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_auto_test make -j20 test make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### SORRY !!! Tests were not implemented yet... make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' for script in `find bin -name "*.pl"` ; do mv $script bin/`basename $script .pl` ; done make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_install dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' dh_installexamples # Fix path names, silence GS find debian/*/usr/share/doc/*/examples -name README -exec sed -i \ -e 's?^$BIN/\([0-9a-z]\+\)\.pl?\1?' \ -e 's?^$BIN/\([0-9a-z]\+\) ?\1 ?' \ -e 's?^GS=.*;?GS="gs -q" ;?' \{\} \; make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'gff2aplot-dbgsym' in '../gff2aplot-dbgsym_2.0-15_amd64.deb'. dpkg-deb: building package 'gff2aplot' in '../gff2aplot_2.0-15_amd64.deb'. dpkg-genbuildinfo --build=binary -O../gff2aplot_2.0-15_amd64.buildinfo dpkg-genchanges --build=binary -O../gff2aplot_2.0-15_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2038874 and its subdirectories I: Current time: Sat Sep 28 05:16:37 +14 2024 I: pbuilder-time-stamp: 1727450197 + false + set +x Fri Sep 27 15:16:37 UTC 2024 I: Signing ./b2/gff2aplot_2.0-15_amd64.buildinfo as gff2aplot_2.0-15_amd64.buildinfo.asc Fri Sep 27 15:16:37 UTC 2024 I: Signed ./b2/gff2aplot_2.0-15_amd64.buildinfo as ./b2/gff2aplot_2.0-15_amd64.buildinfo.asc Fri Sep 27 15:16:37 UTC 2024 - build #2 for gff2aplot/trixie/amd64 on ionos1-amd64 done. Starting cleanup. All cleanup done. Fri Sep 27 15:16:37 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-CcnYoENd, removing. /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf: total 52 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 15:14 b1 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 15:16 b2 -rw-r--r-- 1 jenkins jenkins 2044 Feb 5 2024 gff2aplot_2.0-15.dsc -rw------- 1 jenkins jenkins 39609 Sep 27 15:14 rbuildlog.BaoiRm3 /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1: total 360 -rw-r--r-- 1 jenkins jenkins 36171 Sep 27 15:14 build.log -rw-r--r-- 1 jenkins jenkins 24932 Sep 27 15:14 gff2aplot-dbgsym_2.0-15_amd64.deb -rw-r--r-- 1 jenkins jenkins 20764 Sep 27 15:14 gff2aplot_2.0-15.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2044 Sep 27 15:14 gff2aplot_2.0-15.dsc -rw-r--r-- 1 jenkins jenkins 4891 Sep 27 15:14 gff2aplot_2.0-15_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 5773 Sep 27 15:14 gff2aplot_2.0-15_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1413 Sep 27 15:14 gff2aplot_2.0-15_amd64.changes -rw-r--r-- 1 jenkins jenkins 244092 Sep 27 15:14 gff2aplot_2.0-15_amd64.deb -rw-r--r-- 1 jenkins jenkins 1259 Sep 27 15:14 gff2aplot_2.0-15_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2: total 360 -rw-r--r-- 1 jenkins jenkins 38089 Sep 27 15:16 build.log -rw-r--r-- 1 jenkins jenkins 24932 Sep 27 15:16 gff2aplot-dbgsym_2.0-15_amd64.deb -rw-r--r-- 1 jenkins jenkins 20764 Sep 27 15:16 gff2aplot_2.0-15.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2044 Sep 27 15:16 gff2aplot_2.0-15.dsc -rw-r--r-- 1 jenkins jenkins 4882 Sep 27 15:16 gff2aplot_2.0-15_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 5764 Sep 27 15:16 gff2aplot_2.0-15_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1413 Sep 27 15:16 gff2aplot_2.0-15_amd64.changes -rw-r--r-- 1 jenkins jenkins 244092 Sep 27 15:16 gff2aplot_2.0-15_amd64.deb -rw-r--r-- 1 jenkins jenkins 1259 Sep 27 15:16 gff2aplot_2.0-15_source.changes Fri Sep 27 15:16:42 UTC 2024 I: Deleting $TMPDIR on ionos1-amd64.debian.net. Fri Sep 27 15:16:42 UTC 2024 I: gff2aplot_2.0-15_amd64.changes: Format: 1.8 Date: Mon, 05 Feb 2024 12:09:38 +0100 Source: gff2aplot Binary: gff2aplot gff2aplot-dbgsym Architecture: amd64 Version: 2.0-15 Distribution: unstable Urgency: medium Maintainer: Debian Med Packaging Team Changed-By: Andreas Tille Description: gff2aplot - pair-wise alignment-plots for genomic sequences in PostScript Closes: 1044834 Changes: gff2aplot (2.0-15) unstable; urgency=medium . * Fix clean target Closes: #1044834 * Standards-Version: 4.6.2 (routine-update) Checksums-Sha1: 0cc098bc7b8be76ba8c4d89d9fe94286557b75cc 24932 gff2aplot-dbgsym_2.0-15_amd64.deb 33dc9a7e803dca5ec64833394797a6e5a0be69c7 4891 gff2aplot_2.0-15_amd64.buildinfo eb8ba2379a63de0f90557eb8f2fba9471cab31b2 244092 gff2aplot_2.0-15_amd64.deb Checksums-Sha256: 705560113ef2b9b86eab094826c21b1727f0e30bdb2426b538ebd31283706e47 24932 gff2aplot-dbgsym_2.0-15_amd64.deb 3a61653b59732c08c11f90b961e00fda3e99e63e31b58d37004d9164642354d7 4891 gff2aplot_2.0-15_amd64.buildinfo b34b83917e5802188eebe23b5812923704c3954b7651f3416031908d758de96f 244092 gff2aplot_2.0-15_amd64.deb Files: 6f76413d5d6c21a27f7373e3e322c609 24932 debug optional gff2aplot-dbgsym_2.0-15_amd64.deb 11dd2b20f7fdaa9de73669e5d0dc7ffd 4891 science optional gff2aplot_2.0-15_amd64.buildinfo 2bae23b495ed01c03bfcfb2178e68112 244092 science optional gff2aplot_2.0-15_amd64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/gff2aplot_2.0-15.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/gff2aplot_2.0-15.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/gff2aplot_2.0-15.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/gff2aplot_2.0-15.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/amd64/gff2aplot_2.0-15_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/gff2aplot_2.0-15.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-09-27 15:14:33.935860039 +0000 +++ b2/build.log 2024-09-27 15:16:42.202405310 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Oct 30 09:37:07 -12 2025 -I: pbuilder-time-stamp: 1761860227 +I: Current time: Sat Sep 28 05:14:36 +14 2024 +I: pbuilder-time-stamp: 1727450076 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -38,52 +38,84 @@ dpkg-source: info: applying fix_gff_comments.patch I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/1064325/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D01_modify_environment starting +debug: Running on ionos1-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Sep 27 15:14 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='amd64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=20 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='e12b7e684c7b43cea237282f71160919' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='1064325' - PS1='# ' - PS2='> ' + INVOCATION_ID=626cbf054d50408a83c553884f032a1b + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2038874 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_j6AO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1 --logfile b1/build.log gff2aplot_2.0-15.dsc' - SUDO_GID='111' - SUDO_UID='106' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/pbuilderrc_6QmA --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2 --logfile b2/build.log gff2aplot_2.0-15.dsc' + SUDO_GID=110 + SUDO_UID=105 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos15-amd64 6.10.6+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.10.6-1~bpo12+1 (2024-08-26) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-25-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/1064325/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -96,7 +128,7 @@ Depends: debhelper-compat (= 13) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. -(Reading database ... 19788 files and directories currently installed.) +(Reading database ... 19783 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: @@ -148,10 +180,10 @@ Get: 27 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] -Fetched 19.8 MB in 0s (52.0 MB/s) +Fetched 19.8 MB in 1s (18.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. -(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19788 files and directories currently installed.) +(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19783 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. @@ -279,7 +311,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/gff2aplot-2.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../gff2aplot_2.0-15_source.changes +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/gff2aplot-2.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../gff2aplot_2.0-15_source.changes dpkg-buildpackage: info: source package gff2aplot dpkg-buildpackage: info: source version 2.0-15 dpkg-buildpackage: info: source distribution unstable @@ -299,21 +335,21 @@ dh_autoreconf dh_auto_configure dh_auto_build - make -j42 "INSTALL=install --strip-program=true" + make -j20 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### ### RUNNING MAKEFILE ### +### Fri Sep 27 15:16:02 2024 -- pbuilder2 ### Finishing PERL script from "src/gff2aplot.pl" -> "bin/gff2aplot.pl" -### Thu Oct 30 21:37:28 2025 -- pbuilder1 ### ### Finishing PERL script from "src/parseblast.pl" -> "bin/parseblast.pl" ### Finishing PERL script from "src/blat2gff.pl" -> "bin/blat2gff.pl" ### Finishing PERL script from "src/sim2gff.pl" -> "bin/sim2gff.pl" ### Making ALI2GFF... +make[2]: Entering directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' ### ### MAKEFILE DONE... -make[2]: Entering directory '/build/reproducible-path/gff2aplot-2.0/src/ali2gff' ### ali2gff.c: In function 'main': ali2gff.c:88:15: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] @@ -497,7 +533,7 @@ mode of 'bin/sim2gff.pl' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x) make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' dh_auto_test - make -j42 test + make -j20 test make[1]: Entering directory '/build/reproducible-path/gff2aplot-2.0' ### SORRY !!! Tests were not implemented yet... make[1]: Leaving directory '/build/reproducible-path/gff2aplot-2.0' @@ -535,8 +571,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'gff2aplot' in '../gff2aplot_2.0-15_amd64.deb'. dpkg-deb: building package 'gff2aplot-dbgsym' in '../gff2aplot-dbgsym_2.0-15_amd64.deb'. +dpkg-deb: building package 'gff2aplot' in '../gff2aplot_2.0-15_amd64.deb'. dpkg-genbuildinfo --build=binary -O../gff2aplot_2.0-15_amd64.buildinfo dpkg-genchanges --build=binary -O../gff2aplot_2.0-15_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -544,12 +580,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2038874/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/1064325 and its subdirectories -I: Current time: Thu Oct 30 09:37:33 -12 2025 -I: pbuilder-time-stamp: 1761860253 +I: removing directory /srv/workspace/pbuilder/2038874 and its subdirectories +I: Current time: Sat Sep 28 05:16:37 +14 2024 +I: pbuilder-time-stamp: 1727450197 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/gff2aplot_2.0-15.diff: 69.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/gff2aplot_2.0-15.diff.gz b2/build.log: 80.3% -- replaced with stdout Compressing the 1st log... b1/build.log: 81.0% -- replaced with stdout Fri Sep 27 15:16:44 UTC 2024 I: diffoscope 277 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_gff2aplot_trixie_amd64_1727450204 + touch /var/log/reproducible-builds/diffoscope_stamp_gff2aplot_trixie_amd64_1727450204 + RESULT=0 + systemd-run '--description=diffoscope on gff2aplot/2.0-15 in trixie/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_30-21381 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf --run-session -c jenkins-reproducible-trixie-diffoscope-ca4d0084-41e4-43a3-8fd0-268fcd34e6dd -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/dbd-tmp-UT5m2lO ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/gff2aplot_2.0-15.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/gff2aplot_2.0-15.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/gff2aplot_2.0-15.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1/gff2aplot_2.0-15_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2/gff2aplot_2.0-15_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_30-21381.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/gff2aplot_2.0-15.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/gff2aplot_2.0-15.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/gff2aplot_2.0-15.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b1/gff2aplot_2.0-15_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.BbEUWlqf/b2/gff2aplot_2.0-15_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.398s) 0.398s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 738ms CPU time consumed: 739ms __ __ ____ _ _ __ _ / _|/ _|___ \ __ _ _ __ | | ___ | |_ / _` | |_| |_ __) / _` | '_ \| |/ _ \| __| | (_| | _| _|/ __/ (_| | |_) | | (_) | |_ \__, |_| |_| |_____\__,_| .__/|_|\___/ \__| |___/ |_| Fri Sep 27 15:16:45 UTC 2024 I: diffoscope 277 found no differences in the changes files, and a .buildinfo file also exists. Fri Sep 27 15:16:45 UTC 2024 I: gff2aplot from trixie built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-09-27 15:16:45] INFO: Starting at 2024-09-27 15:16:45.920265 [2024-09-27 15:16:46] INFO: Generating the pages of 1 package(s) [2024-09-27 15:16:46] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/amd64/gff2aplot didn't produce a buildlog, even though it has been built. [2024-09-27 15:16:46] INFO: Finished at 2024-09-27 15:16:46.664476, took: 0:00:00.744223 Fri Sep 27 15:16:46 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/amd64/gff2aplot.html Fri Sep 27 15:16:46 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Sep 27 15:16:46 UTC 2024 I: Submitting 8.0K b1/gff2aplot_2.0-15_amd64.buildinfo.asc https://buildinfo.debian.net/33dc9a7e803dca5ec64833394797a6e5a0be69c7/gff2aplot_2.0-15_amd64 Fri Sep 27 15:16:47 UTC 2024 I: Submitting 8.0K b2/gff2aplot_2.0-15_amd64.buildinfo.asc https://buildinfo.debian.net/d6f4226a069905acb20d906ef591284509f76fc0/gff2aplot_2.0-15_amd64 Fri Sep 27 15:16:48 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Sep 27 15:16:48 UTC 2024 I: Done submitting .buildinfo files. Fri Sep 27 15:16:48 UTC 2024 I: Removing signed gff2aplot_2.0-15_amd64.buildinfo.asc files: removed './b1/gff2aplot_2.0-15_amd64.buildinfo.asc' removed './b2/gff2aplot_2.0-15_amd64.buildinfo.asc' 1727450208 amd64 trixie gff2aplot Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/gff2aplot_2.0-15.rbuild.log: 77.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/gff2aplot_2.0-15.rbuild.log.gz [2024-09-27 15:16:48] INFO: Starting at 2024-09-27 15:16:48.787728 [2024-09-27 15:16:48] INFO: Generating the pages of 1 package(s) [2024-09-27 15:16:49] INFO: Finished at 2024-09-27 15:16:49.288394, took: 0:00:00.500675 All cleanup done. Fri Sep 27 15:16:49 UTC 2024 - total duration: 0h 3m 3s. Fri Sep 27 15:16:49 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-eetZ2XKr, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 3min 6.569s CPU time consumed: 8.321s