Running as unit: rb-build-amd64_36-48883.service ==================================================================================== Fri Feb 21 15:07:57 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_36) on jenkins, called using "infom02-amd64 infom01-amd64" as arguments. Fri Feb 21 15:07:57 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-oX2xLEqE" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Feb 21 15:07:57 UTC 2025 - checking /var/lib/jenkins/offline_nodes if infom02-amd64.debian.net is marked as down. Fri Feb 21 15:07:57 UTC 2025 - checking via ssh if infom02-amd64.debian.net is up. removed '/tmp/read-only-fs-test-gEPQyk' Fri Feb 21 15:07:58 UTC 2025 - checking /var/lib/jenkins/offline_nodes if infom01-amd64.debian.net is marked as down. Fri Feb 21 15:07:58 UTC 2025 - checking via ssh if infom01-amd64.debian.net is up. removed '/tmp/read-only-fs-test-ZMvEca' ok, let's check if pkcs11-data is building anywhere yet… ok, pkcs11-data is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of pkcs11-data in trixie on amd64 on jenkins now. 1st build will be done on infom02-amd64.debian.net. 2nd build will be done on infom01-amd64.debian.net. ============================================================================= Fri Feb 21 15:08:19 UTC 2025 I: starting to build pkcs11-data/trixie/amd64 on jenkins on '2025-02-21 15:07' Fri Feb 21 15:08:19 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_36/48883/console.log 1740150499 amd64 trixie pkcs11-data Fri Feb 21 15:08:19 UTC 2025 I: Downloading source for trixie/pkcs11-data=0.7.4-2 --2025-02-21 15:08:20-- http://deb.debian.org/debian/pool/main/p/pkcs11-data/pkcs11-data_0.7.4-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1204 (1.2K) [text/prs.lines.tag] Saving to: ‘pkcs11-data_0.7.4-2.dsc’ 0K . 100% 170M=0s 2025-02-21 15:08:20 (170 MB/s) - ‘pkcs11-data_0.7.4-2.dsc’ saved [1204/1204] --2025-02-21 15:08:20-- http://deb.debian.org/debian/pool/main/p/pkcs11-data/pkcs11-data_0.7.4-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1204 (1.2K) [text/prs.lines.tag] Saving to: ‘pkcs11-data_0.7.4-2.dsc’ 0K . 100% 170M=0s 2025-02-21 15:08:20 (170 MB/s) - ‘pkcs11-data_0.7.4-2.dsc’ saved [1204/1204] Fri Feb 21 15:08:20 UTC 2025 I: pkcs11-data_0.7.4-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 3.0 (quilt) Source: pkcs11-data Binary: pkcs11-data Architecture: any Version: 0.7.4-2 Maintainer: Max Vozeler Standards-Version: 3.9.5 Vcs-Browser: http://git.debian.org/?p=users/xam/pkcs11-data.git Vcs-Git: git://anonscm.debian.org/users/xam/pkcs11-data.git Build-Depends: debhelper (>= 9), dh-autoreconf, pkg-config, libpkcs11-helper1-dev Package-List: pkcs11-data deb utils extra arch=any Checksums-Sha1: 250ee19230c469cc53af3d39c77cdce5fa546203 226267 pkcs11-data_0.7.4.orig.tar.bz2 d1d2d088b27a96f20554a3aca59a754b1e6004b1 2284 pkcs11-data_0.7.4-2.debian.tar.xz Checksums-Sha256: 8e4312f41631c6a92c17c3149cd7d2f92315b30ca1e73526bf83ccf375a4ba85 226267 pkcs11-data_0.7.4.orig.tar.bz2 abcceec2f0952d9d6d656ead501b1f4a255ac141ad541848fbaae6d6a897b65f 2284 pkcs11-data_0.7.4-2.debian.tar.xz Files: ef6dfb0988bb533a5755a7e9789e5626 226267 pkcs11-data_0.7.4.orig.tar.bz2 dd14edeb5da765d9d2d7147a1bdc91f4 2284 pkcs11-data_0.7.4-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlQRmO4ACgkQnVvVEbfNotwIlACg1Gb860z9kqqWGyMPWzz4UpbV t2UAoJfA8kxdpglmWssmtyabn2Idumsp =9481 -----END PGP SIGNATURE----- Fri Feb 21 15:08:20 UTC 2025 I: Checking whether the package is not for us Fri Feb 21 15:08:20 UTC 2025 I: Starting 1st build on remote node infom02-amd64.debian.net. Fri Feb 21 15:08:20 UTC 2025 I: Preparing to do remote build '1' on infom02-amd64.debian.net. Fri Feb 21 15:08:20 UTC 2025 - checking /var/lib/jenkins/offline_nodes if infom02-amd64.debian.net is marked as down. Fri Feb 21 15:08:20 UTC 2025 - checking via ssh if infom02-amd64.debian.net is up. removed '/tmp/read-only-fs-test-IhhrEk' ==================================================================================== Thu Mar 26 21:31:21 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on infom02-amd64, called using "1 pkcs11-data trixie /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv 0.7.4-2" as arguments. Thu Mar 26 21:31:21 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-VCGSBctR" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Mar 26 21:31:21 UTC 2026 I: Downloading source for trixie/pkcs11-data=0.7.4-2 Reading package lists... NOTICE: 'pkcs11-data' packaging is maintained in the 'Git' version control system at: git://anonscm.debian.org/users/xam/pkcs11-data.git Please use: git clone git://anonscm.debian.org/users/xam/pkcs11-data.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 230 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (dsc) [1204 B] Get:2 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (tar) [226 kB] Get:3 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (diff) [2284 B] Fetched 230 kB in 0s (798 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'pkcs11-data' packaging is maintained in the 'Git' version control system at: git://anonscm.debian.org/users/xam/pkcs11-data.git Please use: git clone git://anonscm.debian.org/users/xam/pkcs11-data.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 230 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (dsc) [1204 B] Get:2 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (tar) [226 kB] Get:3 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (diff) [2284 B] Fetched 230 kB in 0s (798 kB/s) Download complete and in download only mode ============================================================================= Building pkcs11-data in trixie on amd64 on infom02-amd64 now. Date: Thu Mar 26 21:31:22 UTC 2026 Date UTC: Thu Mar 26 21:31:22 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Mar 26 09:31:22 -12 2026 I: pbuilder-time-stamp: 1774560682 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [pkcs11-data_0.7.4-2.dsc] I: copying [./pkcs11-data_0.7.4.orig.tar.bz2] I: copying [./pkcs11-data_0.7.4-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./pkcs11-data_0.7.4-2.dsc: unsupported subcommand dpkg-source: info: extracting pkcs11-data in pkcs11-data-0.7.4 dpkg-source: info: unpacking pkcs11-data_0.7.4.orig.tar.bz2 dpkg-source: info: unpacking pkcs11-data_0.7.4-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/811343/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='67029cf71e874b68b837fcb1896b8460' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='811343' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_wKoW --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1 --logfile b1/build.log pkcs11-data_0.7.4-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom02-amd64 6.12.9+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1~bpo12+1 (2025-01-19) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/811343/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), dh-autoreconf, pkg-config, libpkcs11-helper1-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libpkcs11-helper1-dev; however: Package libpkcs11-helper1-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libjs-jquery{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpkcs11-helper1-dev{a} libpkcs11-helper1t64{a} libpkgconf3{a} libssl-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl javascript-common libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 24.0 MB of archives. After unpacking 96.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-3 [92.1 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-5 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libpkcs11-helper1t64 amd64 1.30.0-1+b1 [51.5 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libssl-dev amd64 3.4.1-1 [2787 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libpkcs11-helper1-dev amd64 1.30.0-1+b1 [165 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libpkgconf3 amd64 1.8.1-4 [36.4 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 pkgconf-bin amd64 1.8.1-4 [30.2 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 pkgconf amd64 1.8.1-4 [26.2 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 pkg-config amd64 1.8.1-4 [14.0 kB] Fetched 24.0 MB in 1s (44.5 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-3_amd64.deb ... Unpacking bsdextrautils (2.40.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_amd64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../30-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ... Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Selecting previously unselected package libpkcs11-helper1t64:amd64. Preparing to unpack .../31-libpkcs11-helper1t64_1.30.0-1+b1_amd64.deb ... Unpacking libpkcs11-helper1t64:amd64 (1.30.0-1+b1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../32-libssl-dev_3.4.1-1_amd64.deb ... Unpacking libssl-dev:amd64 (3.4.1-1) ... Selecting previously unselected package libpkcs11-helper1-dev:amd64. Preparing to unpack .../33-libpkcs11-helper1-dev_1.30.0-1+b1_amd64.deb ... Unpacking libpkcs11-helper1-dev:amd64 (1.30.0-1+b1) ... Selecting previously unselected package libpkgconf3:amd64. Preparing to unpack .../34-libpkgconf3_1.8.1-4_amd64.deb ... Unpacking libpkgconf3:amd64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../35-pkgconf-bin_1.8.1-4_amd64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:amd64. Preparing to unpack .../36-pkgconf_1.8.1-4_amd64.deb ... Unpacking pkgconf:amd64 (1.8.1-4) ... Selecting previously unselected package pkg-config:amd64. Preparing to unpack .../37-pkg-config_1.8.1-4_amd64.deb ... Unpacking pkg-config:amd64 (1.8.1-4) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:amd64 (1.8.1-4) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up libssl-dev:amd64 (3.4.1-1) ... Setting up autopoint (0.23.1-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libpkcs11-helper1t64:amd64 (1.30.0-1+b1) ... Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up libpkcs11-helper1-dev:amd64 (1.30.0-1+b1) ... Setting up pkgconf:amd64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up pkg-config:amd64 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/pkcs11-data-0.7.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../pkcs11-data_0.7.4-2_source.changes dpkg-buildpackage: info: source package pkcs11-data dpkg-buildpackage: info: source version 0.7.4-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Max Vozeler dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean --with autoreconf dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules binary dh binary --with autoreconf dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Remember to add 'LT_INIT' to configure.ac. configure.ac:27: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:842: AM_INIT_AUTOMAKE is expanded from... configure.ac:27: the top level configure.ac:28: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:28: You should use the 'AC_CONFIG_HEADERS' macro instead. aclocal.m4:1120: AM_CONFIG_HEADER is expanded from... configure.ac:28: the top level configure.ac:38: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:38: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:38: the top level configure.ac:65: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:65: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.ac:65: the top level configure.ac:72: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:72: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.ac:72: the top level configure.ac:101: warning: The macro 'AC_TYPE_SIGNAL' is obsolete. configure.ac:101: You should run autoupdate. ./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from... configure.ac:101: the top level configure.ac:111: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:111: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:111: the top level configure.ac:139: warning: AC_OUTPUT should be used without arguments. configure.ac:139: You should run autoupdate. configure.ac:27: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:27: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.ac:79: installing './compile' configure.ac:27: installing './missing' Makefile.am: installing './depcomp' dh_auto_configure dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use) ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --libexecdir=\${prefix}/lib/x86_64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether sleep supports fractional seconds... yes checking filesystem timestamp resolution... 0.01 checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking xargs -n works... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ranlib... ranlib checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for windres... no checking return type of signal handlers... void checking for vprintf... yes checking for gettimeofday... yes checking for memmove... yes checking for memset... yes checking for socket... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strrchr... yes checking for snprintf... yes checking for libpkcs11-helper-1 >= 1.02... yes checking pkcs11-helper features... ok checking for egrep... (cached) /usr/bin/grep -E checking for an ANSI C-conforming const... yes checking for working volatile... yes checking for size_t... yes checking for stdio.h... (cached) yes checking for errno.h... yes checking for getopt.h... yes checking for signal.h... yes checking for unistd.h... (cached) yes checking for sys/wait.h... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating versioninfo.rc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make all-am make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -c -o pkcs11_data-pkcs11-data.o `test -f 'pkcs11-data.c' || echo './'`pkcs11-data.c pkcs11-data.c: In function '_pkcs11h_hooks_pin_prompt': pkcs11-data.c:450:59: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1010 [-Wformat-truncation=] 450 | snprintf (prompt, sizeof (prompt), "Please enter '%s' PIN or 'cancel': ", token->display); | ^~ In file included from /usr/include/stdio.h:970, from pkcs11-data.c:30: In function 'snprintf', inlined from '_pkcs11h_hooks_pin_prompt' at pkcs11-data.c:450:2: /usr/include/x86_64-linux-gnu/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 34 and 1057 bytes into a destination of size 1024 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ pkcs11-data.c: In function '_pkcs11h_hooks_token_prompt': pkcs11-data.c:402:74: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] 402 | snprintf (prompt, sizeof (prompt), "Please insert token '%s' 'ok' or 'cancel': ", token->display); | ^~ In function 'snprintf', inlined from '_pkcs11h_hooks_token_prompt' at pkcs11-data.c:402:3: /usr/include/x86_64-linux-gnu/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 42 and 1065 bytes into a destination of size 1024 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper libtool: link: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z -Wl,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 check "TESTSUITEFLAGS=-j1 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_prep dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_auto_install --destdir=debian/pkcs11-data/ dh_auto_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 install DESTDIR=/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c pkcs11-data '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' libtool: install: /usr/bin/install -c pkcs11-data /build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin/pkcs11-data /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/install -c -m 644 README COPYING.GPL COPYING '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/man/man1' /usr/bin/install -c -m 644 pkcs11-data.1 '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/man/man1' make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' debian/rules override_dh_installdocs make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) # Remove extra copies of the licensing information rm debian/pkcs11-data/usr/share/doc/pkcs11-data/COPYING* make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installexamples dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_link: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_md5sums dh_builddeb dpkg-deb: building package 'pkcs11-data-dbgsym' in '../pkcs11-data-dbgsym_0.7.4-2_amd64.deb'. dpkg-deb: building package 'pkcs11-data' in '../pkcs11-data_0.7.4-2_amd64.deb'. dpkg-genbuildinfo --build=binary -O../pkcs11-data_0.7.4-2_amd64.buildinfo dpkg-genchanges --build=binary -O../pkcs11-data_0.7.4-2_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/811343 and its subdirectories I: Current time: Thu Mar 26 09:32:17 -12 2026 I: pbuilder-time-stamp: 1774560737 Thu Mar 26 21:32:17 UTC 2026 I: Signing ./b1/pkcs11-data_0.7.4-2_amd64.buildinfo as pkcs11-data_0.7.4-2_amd64.buildinfo.asc Thu Mar 26 21:32:17 UTC 2026 I: Signed ./b1/pkcs11-data_0.7.4-2_amd64.buildinfo as ./b1/pkcs11-data_0.7.4-2_amd64.buildinfo.asc Thu Mar 26 21:32:17 UTC 2026 - build #1 for pkcs11-data/trixie/amd64 on infom02-amd64 done. Starting cleanup. All cleanup done. Thu Mar 26 21:32:17 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-VCGSBctR, removing. /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Feb 21 15:09 b1 drwxr-xr-x 2 jenkins jenkins 4096 Feb 21 15:08 b2 -rw-r--r-- 1 jenkins jenkins 1204 Sep 11 2014 pkcs11-data_0.7.4-2.dsc -rw------- 1 jenkins jenkins 2330 Feb 21 15:08 rbuildlog.hEBSvL0 /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1: total 96 -rw-r--r-- 1 jenkins jenkins 35367 Feb 21 15:09 build.log -rw-r--r-- 1 jenkins jenkins 16316 Feb 21 15:09 pkcs11-data-dbgsym_0.7.4-2_amd64.deb -rw-r--r-- 1 jenkins jenkins 2284 Feb 21 15:09 pkcs11-data_0.7.4-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 1204 Feb 21 15:09 pkcs11-data_0.7.4-2.dsc -rw-r--r-- 1 jenkins jenkins 5147 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6029 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1427 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.changes -rw-r--r-- 1 jenkins jenkins 11492 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.deb -rw-r--r-- 1 jenkins jenkins 1297 Feb 21 15:09 pkcs11-data_0.7.4-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2: total 0 Fri Feb 21 15:09:18 UTC 2025 I: Deleting $TMPDIR on infom02-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Mar 26 09:31:22 -12 2026 I: pbuilder-time-stamp: 1774560682 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [pkcs11-data_0.7.4-2.dsc] I: copying [./pkcs11-data_0.7.4.orig.tar.bz2] I: copying [./pkcs11-data_0.7.4-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./pkcs11-data_0.7.4-2.dsc: unsupported subcommand dpkg-source: info: extracting pkcs11-data in pkcs11-data-0.7.4 dpkg-source: info: unpacking pkcs11-data_0.7.4.orig.tar.bz2 dpkg-source: info: unpacking pkcs11-data_0.7.4-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/811343/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='67029cf71e874b68b837fcb1896b8460' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='811343' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_wKoW --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1 --logfile b1/build.log pkcs11-data_0.7.4-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom02-amd64 6.12.9+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1~bpo12+1 (2025-01-19) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/811343/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), dh-autoreconf, pkg-config, libpkcs11-helper1-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libpkcs11-helper1-dev; however: Package libpkcs11-helper1-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libjs-jquery{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpkcs11-helper1-dev{a} libpkcs11-helper1t64{a} libpkgconf3{a} libssl-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl javascript-common libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 24.0 MB of archives. After unpacking 96.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-3 [92.1 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-5 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libpkcs11-helper1t64 amd64 1.30.0-1+b1 [51.5 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libssl-dev amd64 3.4.1-1 [2787 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libpkcs11-helper1-dev amd64 1.30.0-1+b1 [165 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libpkgconf3 amd64 1.8.1-4 [36.4 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 pkgconf-bin amd64 1.8.1-4 [30.2 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 pkgconf amd64 1.8.1-4 [26.2 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 pkg-config amd64 1.8.1-4 [14.0 kB] Fetched 24.0 MB in 1s (44.5 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-3_amd64.deb ... Unpacking bsdextrautils (2.40.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_amd64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../30-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ... Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Selecting previously unselected package libpkcs11-helper1t64:amd64. Preparing to unpack .../31-libpkcs11-helper1t64_1.30.0-1+b1_amd64.deb ... Unpacking libpkcs11-helper1t64:amd64 (1.30.0-1+b1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../32-libssl-dev_3.4.1-1_amd64.deb ... Unpacking libssl-dev:amd64 (3.4.1-1) ... Selecting previously unselected package libpkcs11-helper1-dev:amd64. Preparing to unpack .../33-libpkcs11-helper1-dev_1.30.0-1+b1_amd64.deb ... Unpacking libpkcs11-helper1-dev:amd64 (1.30.0-1+b1) ... Selecting previously unselected package libpkgconf3:amd64. Preparing to unpack .../34-libpkgconf3_1.8.1-4_amd64.deb ... Unpacking libpkgconf3:amd64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../35-pkgconf-bin_1.8.1-4_amd64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:amd64. Preparing to unpack .../36-pkgconf_1.8.1-4_amd64.deb ... Unpacking pkgconf:amd64 (1.8.1-4) ... Selecting previously unselected package pkg-config:amd64. Preparing to unpack .../37-pkg-config_1.8.1-4_amd64.deb ... Unpacking pkg-config:amd64 (1.8.1-4) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:amd64 (1.8.1-4) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up libssl-dev:amd64 (3.4.1-1) ... Setting up autopoint (0.23.1-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libpkcs11-helper1t64:amd64 (1.30.0-1+b1) ... Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up libpkcs11-helper1-dev:amd64 (1.30.0-1+b1) ... Setting up pkgconf:amd64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up pkg-config:amd64 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/pkcs11-data-0.7.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../pkcs11-data_0.7.4-2_source.changes dpkg-buildpackage: info: source package pkcs11-data dpkg-buildpackage: info: source version 0.7.4-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Max Vozeler dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean --with autoreconf dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules binary dh binary --with autoreconf dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Remember to add 'LT_INIT' to configure.ac. configure.ac:27: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:842: AM_INIT_AUTOMAKE is expanded from... configure.ac:27: the top level configure.ac:28: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:28: You should use the 'AC_CONFIG_HEADERS' macro instead. aclocal.m4:1120: AM_CONFIG_HEADER is expanded from... configure.ac:28: the top level configure.ac:38: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:38: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:38: the top level configure.ac:65: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:65: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.ac:65: the top level configure.ac:72: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:72: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.ac:72: the top level configure.ac:101: warning: The macro 'AC_TYPE_SIGNAL' is obsolete. configure.ac:101: You should run autoupdate. ./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from... configure.ac:101: the top level configure.ac:111: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:111: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:111: the top level configure.ac:139: warning: AC_OUTPUT should be used without arguments. configure.ac:139: You should run autoupdate. configure.ac:27: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:27: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.ac:79: installing './compile' configure.ac:27: installing './missing' Makefile.am: installing './depcomp' dh_auto_configure dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use) ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --libexecdir=\${prefix}/lib/x86_64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether sleep supports fractional seconds... yes checking filesystem timestamp resolution... 0.01 checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking xargs -n works... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ranlib... ranlib checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for windres... no checking return type of signal handlers... void checking for vprintf... yes checking for gettimeofday... yes checking for memmove... yes checking for memset... yes checking for socket... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strrchr... yes checking for snprintf... yes checking for libpkcs11-helper-1 >= 1.02... yes checking pkcs11-helper features... ok checking for egrep... (cached) /usr/bin/grep -E checking for an ANSI C-conforming const... yes checking for working volatile... yes checking for size_t... yes checking for stdio.h... (cached) yes checking for errno.h... yes checking for getopt.h... yes checking for signal.h... yes checking for unistd.h... (cached) yes checking for sys/wait.h... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating versioninfo.rc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make all-am make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -c -o pkcs11_data-pkcs11-data.o `test -f 'pkcs11-data.c' || echo './'`pkcs11-data.c pkcs11-data.c: In function '_pkcs11h_hooks_pin_prompt': pkcs11-data.c:450:59: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1010 [-Wformat-truncation=] 450 | snprintf (prompt, sizeof (prompt), "Please enter '%s' PIN or 'cancel': ", token->display); | ^~ In file included from /usr/include/stdio.h:970, from pkcs11-data.c:30: In function 'snprintf', inlined from '_pkcs11h_hooks_pin_prompt' at pkcs11-data.c:450:2: /usr/include/x86_64-linux-gnu/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 34 and 1057 bytes into a destination of size 1024 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ pkcs11-data.c: In function '_pkcs11h_hooks_token_prompt': pkcs11-data.c:402:74: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] 402 | snprintf (prompt, sizeof (prompt), "Please insert token '%s' 'ok' or 'cancel': ", token->display); | ^~ In function 'snprintf', inlined from '_pkcs11h_hooks_token_prompt' at pkcs11-data.c:402:3: /usr/include/x86_64-linux-gnu/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 42 and 1065 bytes into a destination of size 1024 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper libtool: link: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z -Wl,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 check "TESTSUITEFLAGS=-j1 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_prep dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_auto_install --destdir=debian/pkcs11-data/ dh_auto_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 install DESTDIR=/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c pkcs11-data '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' libtool: install: /usr/bin/install -c pkcs11-data /build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin/pkcs11-data /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/install -c -m 644 README COPYING.GPL COPYING '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/man/man1' /usr/bin/install -c -m 644 pkcs11-data.1 '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/man/man1' make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' debian/rules override_dh_installdocs make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) # Remove extra copies of the licensing information rm debian/pkcs11-data/usr/share/doc/pkcs11-data/COPYING* make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installexamples dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_link: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_md5sums dh_builddeb dpkg-deb: building package 'pkcs11-data-dbgsym' in '../pkcs11-data-dbgsym_0.7.4-2_amd64.deb'. dpkg-deb: building package 'pkcs11-data' in '../pkcs11-data_0.7.4-2_amd64.deb'. dpkg-genbuildinfo --build=binary -O../pkcs11-data_0.7.4-2_amd64.buildinfo dpkg-genchanges --build=binary -O../pkcs11-data_0.7.4-2_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/811343 and its subdirectories I: Current time: Thu Mar 26 09:32:17 -12 2026 I: pbuilder-time-stamp: 1774560737 Fri Feb 21 15:09:18 UTC 2025 I: 1st build successful. Starting 2nd build on remote node infom01-amd64.debian.net. Fri Feb 21 15:09:18 UTC 2025 I: Preparing to do remote build '2' on infom01-amd64.debian.net. Fri Feb 21 15:09:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if infom01-amd64.debian.net is marked as down. Fri Feb 21 15:09:18 UTC 2025 - checking via ssh if infom01-amd64.debian.net is up. removed '/tmp/read-only-fs-test-mcINbb' ==================================================================================== Fri Feb 21 15:09:19 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on infom01-amd64, called using "2 pkcs11-data trixie /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv 0.7.4-2" as arguments. Fri Feb 21 15:09:19 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-AbwV7ylX" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Feb 21 15:09:19 UTC 2025 I: Downloading source for trixie/pkcs11-data=0.7.4-2 Reading package lists... NOTICE: 'pkcs11-data' packaging is maintained in the 'Git' version control system at: git://anonscm.debian.org/users/xam/pkcs11-data.git Please use: git clone git://anonscm.debian.org/users/xam/pkcs11-data.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 230 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (dsc) [1204 B] Get:2 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (tar) [226 kB] Get:3 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (diff) [2284 B] Fetched 230 kB in 0s (2621 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'pkcs11-data' packaging is maintained in the 'Git' version control system at: git://anonscm.debian.org/users/xam/pkcs11-data.git Please use: git clone git://anonscm.debian.org/users/xam/pkcs11-data.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 230 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (dsc) [1204 B] Get:2 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (tar) [226 kB] Get:3 http://deb.debian.org/debian trixie/main pkcs11-data 0.7.4-2 (diff) [2284 B] Fetched 230 kB in 0s (2621 kB/s) Download complete and in download only mode ============================================================================= Re-Building pkcs11-data in trixie on amd64 on infom01-amd64 now. Date: Fri Feb 21 15:09:20 UTC 2025 Date UTC: Fri Feb 21 15:09:20 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_cBwx + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' pkcs11-data = debian-installer -o pkcs11-data = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' pkcs11-data = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_cBwx --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2 --logfile b2/build.log pkcs11-data_0.7.4-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Sat Feb 22 05:09:20 +14 2025 I: pbuilder-time-stamp: 1740150560 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [pkcs11-data_0.7.4-2.dsc] I: copying [./pkcs11-data_0.7.4.orig.tar.bz2] I: copying [./pkcs11-data_0.7.4-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./pkcs11-data_0.7.4-2.dsc: unsupported subcommand dpkg-source: info: extracting pkcs11-data in pkcs11-data-0.7.4 dpkg-source: info: unpacking pkcs11-data_0.7.4.orig.tar.bz2 dpkg-source: info: unpacking pkcs11-data_0.7.4-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D01_modify_environment starting debug: Running on infom01-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Feb 21 15:09 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=5d80ce5907864639bd1a1f56a2a57208 LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1832136 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_cBwx --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2 --logfile b2/build.log pkcs11-data_0.7.4-2.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' I: uname -a Linux i-capture-the-hostname 6.1.0-31-cloud-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.128-1 (2025-02-07) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), dh-autoreconf, pkg-config, libpkcs11-helper1-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libpkcs11-helper1-dev; however: Package libpkcs11-helper1-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libjs-jquery{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpkcs11-helper1-dev{a} libpkcs11-helper1t64{a} libpkgconf3{a} libssl-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl javascript-common libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 24.0 MB of archives. After unpacking 96.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-3 [92.1 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-5 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libpkcs11-helper1t64 amd64 1.30.0-1+b1 [51.5 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libssl-dev amd64 3.4.1-1 [2787 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libpkcs11-helper1-dev amd64 1.30.0-1+b1 [165 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libpkgconf3 amd64 1.8.1-4 [36.4 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 pkgconf-bin amd64 1.8.1-4 [30.2 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 pkgconf amd64 1.8.1-4 [26.2 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 pkg-config amd64 1.8.1-4 [14.0 kB] Fetched 24.0 MB in 0s (101 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-3_amd64.deb ... Unpacking bsdextrautils (2.40.4-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_amd64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../30-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ... Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Selecting previously unselected package libpkcs11-helper1t64:amd64. Preparing to unpack .../31-libpkcs11-helper1t64_1.30.0-1+b1_amd64.deb ... Unpacking libpkcs11-helper1t64:amd64 (1.30.0-1+b1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../32-libssl-dev_3.4.1-1_amd64.deb ... Unpacking libssl-dev:amd64 (3.4.1-1) ... Selecting previously unselected package libpkcs11-helper1-dev:amd64. Preparing to unpack .../33-libpkcs11-helper1-dev_1.30.0-1+b1_amd64.deb ... Unpacking libpkcs11-helper1-dev:amd64 (1.30.0-1+b1) ... Selecting previously unselected package libpkgconf3:amd64. Preparing to unpack .../34-libpkgconf3_1.8.1-4_amd64.deb ... Unpacking libpkgconf3:amd64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../35-pkgconf-bin_1.8.1-4_amd64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:amd64. Preparing to unpack .../36-pkgconf_1.8.1-4_amd64.deb ... Unpacking pkgconf:amd64 (1.8.1-4) ... Selecting previously unselected package pkg-config:amd64. Preparing to unpack .../37-pkg-config_1.8.1-4_amd64.deb ... Unpacking pkg-config:amd64 (1.8.1-4) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:amd64 (1.8.1-4) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up libssl-dev:amd64 (3.4.1-1) ... Setting up autopoint (0.23.1-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libpkcs11-helper1t64:amd64 (1.30.0-1+b1) ... Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up libpkcs11-helper1-dev:amd64 (1.30.0-1+b1) ... Setting up pkgconf:amd64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up pkg-config:amd64 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/pkcs11-data-0.7.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../pkcs11-data_0.7.4-2_source.changes dpkg-buildpackage: info: source package pkcs11-data dpkg-buildpackage: info: source version 0.7.4-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Max Vozeler dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean --with autoreconf dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules binary dh binary --with autoreconf dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Remember to add 'LT_INIT' to configure.ac. configure.ac:27: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:842: AM_INIT_AUTOMAKE is expanded from... configure.ac:27: the top level configure.ac:28: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:28: You should use the 'AC_CONFIG_HEADERS' macro instead. aclocal.m4:1120: AM_CONFIG_HEADER is expanded from... configure.ac:28: the top level configure.ac:38: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:38: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:38: the top level configure.ac:65: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:65: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.ac:65: the top level configure.ac:72: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:72: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.ac:72: the top level configure.ac:101: warning: The macro 'AC_TYPE_SIGNAL' is obsolete. configure.ac:101: You should run autoupdate. ./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from... configure.ac:101: the top level configure.ac:111: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:111: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:111: the top level configure.ac:139: warning: AC_OUTPUT should be used without arguments. configure.ac:139: You should run autoupdate. configure.ac:27: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:27: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.ac:79: installing './compile' configure.ac:27: installing './missing' Makefile.am: installing './depcomp' dh_auto_configure dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use) ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --libexecdir=\${prefix}/lib/x86_64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether sleep supports fractional seconds... yes checking filesystem timestamp resolution... 0.01 checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking xargs -n works... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ranlib... ranlib checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for windres... no checking return type of signal handlers... void checking for vprintf... yes checking for gettimeofday... yes checking for memmove... yes checking for memset... yes checking for socket... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strrchr... yes checking for snprintf... yes checking for libpkcs11-helper-1 >= 1.02... yes checking pkcs11-helper features... ok checking for egrep... (cached) /usr/bin/grep -E checking for an ANSI C-conforming const... yes checking for working volatile... yes checking for size_t... yes checking for stdio.h... (cached) yes checking for errno.h... yes checking for getopt.h... yes checking for signal.h... yes checking for unistd.h... (cached) yes checking for sys/wait.h... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating versioninfo.rc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make all-am make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -c -o pkcs11_data-pkcs11-data.o `test -f 'pkcs11-data.c' || echo './'`pkcs11-data.c pkcs11-data.c: In function '_pkcs11h_hooks_pin_prompt': pkcs11-data.c:450:59: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1010 [-Wformat-truncation=] 450 | snprintf (prompt, sizeof (prompt), "Please enter '%s' PIN or 'cancel': ", token->display); | ^~ In file included from /usr/include/stdio.h:970, from pkcs11-data.c:30: In function 'snprintf', inlined from '_pkcs11h_hooks_pin_prompt' at pkcs11-data.c:450:2: /usr/include/x86_64-linux-gnu/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 34 and 1057 bytes into a destination of size 1024 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ pkcs11-data.c: In function '_pkcs11h_hooks_token_prompt': pkcs11-data.c:402:74: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] 402 | snprintf (prompt, sizeof (prompt), "Please insert token '%s' 'ok' or 'cancel': ", token->display); | ^~ In function 'snprintf', inlined from '_pkcs11h_hooks_token_prompt' at pkcs11-data.c:402:3: /usr/include/x86_64-linux-gnu/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 42 and 1065 bytes into a destination of size 1024 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ /bin/sh ./libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper libtool: link: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z -Wl,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 check "TESTSUITEFLAGS=-j1 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_prep dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_auto_install --destdir=debian/pkcs11-data/ dh_auto_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 install DESTDIR=/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -c pkcs11-data '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' libtool: install: /usr/bin/install -c pkcs11-data /build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin/pkcs11-data /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/install -c -m 644 README COPYING.GPL COPYING '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/man/man1' /usr/bin/install -c -m 644 pkcs11-data.1 '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/man/man1' make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' debian/rules override_dh_installdocs make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) # Remove extra copies of the licensing information rm debian/pkcs11-data/usr/share/doc/pkcs11-data/COPYING* make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installexamples dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_link: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_gencontrol: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_md5sums dh_builddeb dpkg-deb: building package 'pkcs11-data-dbgsym' in '../pkcs11-data-dbgsym_0.7.4-2_amd64.deb'. dpkg-deb: building package 'pkcs11-data' in '../pkcs11-data_0.7.4-2_amd64.deb'. dpkg-genbuildinfo --build=binary -O../pkcs11-data_0.7.4-2_amd64.buildinfo dpkg-genchanges --build=binary -O../pkcs11-data_0.7.4-2_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1832136 and its subdirectories I: Current time: Sat Feb 22 05:10:08 +14 2025 I: pbuilder-time-stamp: 1740150608 + false + set +x Fri Feb 21 15:10:08 UTC 2025 I: Signing ./b2/pkcs11-data_0.7.4-2_amd64.buildinfo as pkcs11-data_0.7.4-2_amd64.buildinfo.asc Fri Feb 21 15:10:08 UTC 2025 I: Signed ./b2/pkcs11-data_0.7.4-2_amd64.buildinfo as ./b2/pkcs11-data_0.7.4-2_amd64.buildinfo.asc Fri Feb 21 15:10:08 UTC 2025 - build #2 for pkcs11-data/trixie/amd64 on infom01-amd64 done. Starting cleanup. All cleanup done. Fri Feb 21 15:10:08 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-AbwV7ylX, removing. /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv: total 52 drwxr-xr-x 2 jenkins jenkins 4096 Feb 21 15:09 b1 drwxr-xr-x 2 jenkins jenkins 4096 Feb 21 15:10 b2 -rw-r--r-- 1 jenkins jenkins 1204 Sep 11 2014 pkcs11-data_0.7.4-2.dsc -rw------- 1 jenkins jenkins 37986 Feb 21 15:09 rbuildlog.hEBSvL0 /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1: total 96 -rw-r--r-- 1 jenkins jenkins 35367 Feb 21 15:09 build.log -rw-r--r-- 1 jenkins jenkins 16316 Feb 21 15:09 pkcs11-data-dbgsym_0.7.4-2_amd64.deb -rw-r--r-- 1 jenkins jenkins 2284 Feb 21 15:09 pkcs11-data_0.7.4-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 1204 Feb 21 15:09 pkcs11-data_0.7.4-2.dsc -rw-r--r-- 1 jenkins jenkins 5147 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6029 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1427 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.changes -rw-r--r-- 1 jenkins jenkins 11492 Feb 21 15:09 pkcs11-data_0.7.4-2_amd64.deb -rw-r--r-- 1 jenkins jenkins 1297 Feb 21 15:09 pkcs11-data_0.7.4-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2: total 100 -rw-r--r-- 1 jenkins jenkins 37295 Feb 21 15:10 build.log -rw-r--r-- 1 jenkins jenkins 16316 Feb 21 15:10 pkcs11-data-dbgsym_0.7.4-2_amd64.deb -rw-r--r-- 1 jenkins jenkins 2284 Feb 21 15:10 pkcs11-data_0.7.4-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 1204 Feb 21 15:10 pkcs11-data_0.7.4-2.dsc -rw-r--r-- 1 jenkins jenkins 5144 Feb 21 15:10 pkcs11-data_0.7.4-2_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6026 Feb 21 15:10 pkcs11-data_0.7.4-2_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1427 Feb 21 15:10 pkcs11-data_0.7.4-2_amd64.changes -rw-r--r-- 1 jenkins jenkins 11492 Feb 21 15:10 pkcs11-data_0.7.4-2_amd64.deb -rw-r--r-- 1 jenkins jenkins 1297 Feb 21 15:10 pkcs11-data_0.7.4-2_source.changes Fri Feb 21 15:10:09 UTC 2025 I: Deleting $TMPDIR on infom01-amd64.debian.net. Fri Feb 21 15:10:10 UTC 2025 I: pkcs11-data_0.7.4-2_amd64.changes: Format: 1.8 Date: Thu, 11 Sep 2014 14:42:01 +0200 Source: pkcs11-data Binary: pkcs11-data pkcs11-data-dbgsym Architecture: amd64 Version: 0.7.4-2 Distribution: unstable Urgency: medium Maintainer: Max Vozeler Changed-By: Max Vozeler Description: pkcs11-data - Manage PKCS#11 data objects Closes: 727939 744491 Changes: pkcs11-data (0.7.4-2) unstable; urgency=medium . * Use dh-autoreconf (closes: #727939, #744491) * Change Vcs-Git header to point to publically accessible URL * Update to policy 3.9.5 (no changes) Checksums-Sha1: c3fb3ed0b7e32e9130498b3a942d06ed346294da 16316 pkcs11-data-dbgsym_0.7.4-2_amd64.deb d2fbe3bacc717fcdb32c2e3ae25b35978e78ffee 5147 pkcs11-data_0.7.4-2_amd64.buildinfo a3fb42b5a2e6caf65156be0c2cc29bfec304a30d 11492 pkcs11-data_0.7.4-2_amd64.deb Checksums-Sha256: 59a4049723e87f9d9b509ee38ab5ef7fdadb7cd1da6f5c5c7069a639b622b337 16316 pkcs11-data-dbgsym_0.7.4-2_amd64.deb 3d304cfc94c57755947989a6117c1f475de4c1365ce90b939c789933fd316ffd 5147 pkcs11-data_0.7.4-2_amd64.buildinfo e6480fe7cd3d8b8e66decef0d2875f5355d13dccdb8e540b9c5efa4ce14fbf49 11492 pkcs11-data_0.7.4-2_amd64.deb Files: 033e393132cfd5d56b88fda5c94f7ef9 16316 debug optional pkcs11-data-dbgsym_0.7.4-2_amd64.deb a1466b1e34d68a72091c321478e88d8b 5147 utils extra pkcs11-data_0.7.4-2_amd64.buildinfo aa3ad78771df1f33792bce0198d21232 11492 utils extra pkcs11-data_0.7.4-2_amd64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/pkcs11-data_0.7.4-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/pkcs11-data_0.7.4-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/pkcs11-data_0.7.4-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/pkcs11-data_0.7.4-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/amd64/pkcs11-data_0.7.4-2_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/pkcs11-data_0.7.4-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-02-21 15:09:18.123587212 +0000 +++ b2/build.log 2025-02-21 15:10:09.629267501 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Mar 26 09:31:22 -12 2026 -I: pbuilder-time-stamp: 1774560682 +I: Current time: Sat Feb 22 05:09:20 +14 2025 +I: pbuilder-time-stamp: 1740150560 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -22,51 +22,83 @@ dpkg-source: info: unpacking pkcs11-data_0.7.4-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/811343/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D01_modify_environment starting +debug: Running on infom01-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Feb 21 15:09 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='amd64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='67029cf71e874b68b837fcb1896b8460' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='811343' - PS1='# ' - PS2='> ' + INVOCATION_ID=5d80ce5907864639bd1a1f56a2a57208 + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1832136 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_wKoW --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1 --logfile b1/build.log pkcs11-data_0.7.4-2.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pbuilderrc_cBwx --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2 --logfile b2/build.log pkcs11-data_0.7.4-2.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' I: uname -a - Linux infom02-amd64 6.12.9+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.9-1~bpo12+1 (2025-01-19) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-31-cloud-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.128-1 (2025-02-07) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/811343/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -146,7 +178,7 @@ Get: 36 http://deb.debian.org/debian trixie/main amd64 pkgconf-bin amd64 1.8.1-4 [30.2 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 pkgconf amd64 1.8.1-4 [26.2 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 pkg-config amd64 1.8.1-4 [14.0 kB] -Fetched 24.0 MB in 1s (44.5 MB/s) +Fetched 24.0 MB in 0s (101 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) @@ -318,7 +350,11 @@ fakeroot is already the newest version (1.37-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/pkcs11-data-0.7.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../pkcs11-data_0.7.4-2_source.changes +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/pkcs11-data-0.7.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../pkcs11-data_0.7.4-2_source.changes dpkg-buildpackage: info: source package pkcs11-data dpkg-buildpackage: info: source version 0.7.4-2 dpkg-buildpackage: info: source distribution unstable @@ -531,7 +567,7 @@ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ -/bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper +/bin/sh ./libtool --tag=CC --mode=link gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper libtool: link: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/pkcs11-data-0.7.4=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z -Wl,relro -o pkcs11-data pkcs11_data-pkcs11-data.o -lpthread -ldl -lcrypto -lpkcs11-helper make[2]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' make[1]: Leaving directory '/build/reproducible-path/pkcs11-data-0.7.4' @@ -549,7 +585,7 @@ make[1]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' make[2]: Entering directory '/build/reproducible-path/pkcs11-data-0.7.4' /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' - /bin/bash ./libtool --mode=install /usr/bin/install -c pkcs11-data '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' + /bin/sh ./libtool --mode=install /usr/bin/install -c pkcs11-data '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin' libtool: install: /usr/bin/install -c pkcs11-data /build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/bin/pkcs11-data /usr/bin/mkdir -p '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' /usr/bin/install -c -m 644 README COPYING.GPL COPYING '/build/reproducible-path/pkcs11-data-0.7.4/debian/pkcs11-data/usr/share/doc/pkcs11-data' @@ -600,12 +636,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1832136/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/811343 and its subdirectories -I: Current time: Thu Mar 26 09:32:17 -12 2026 -I: pbuilder-time-stamp: 1774560737 +I: removing directory /srv/workspace/pbuilder/1832136 and its subdirectories +I: Current time: Sat Feb 22 05:10:08 +14 2025 +I: pbuilder-time-stamp: 1740150608 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/pkcs11-data_0.7.4-2.diff: 69.8% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/pkcs11-data_0.7.4-2.diff.gz b2/build.log: 76.1% -- replaced with stdout Compressing the 1st log... b1/build.log: 76.6% -- replaced with stdout Fri Feb 21 15:10:11 UTC 2025 I: diffoscope 288 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_pkcs11-data_trixie_amd64_1740150611 + touch /var/log/reproducible-builds/diffoscope_stamp_pkcs11-data_trixie_amd64_1740150611 + RESULT=0 + systemd-run '--description=diffoscope on pkcs11-data/0.7.4-2 in trixie/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_36-48883 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv --run-session -c jenkins-reproducible-trixie-diffoscope-4af3d246-4887-4062-9bca-6e86f342128c -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/dbd-tmp-6weHyjY ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pkcs11-data_0.7.4-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pkcs11-data_0.7.4-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pkcs11-data_0.7.4-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1/pkcs11-data_0.7.4-2_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2/pkcs11-data_0.7.4-2_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_36-48883.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pkcs11-data_0.7.4-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pkcs11-data_0.7.4-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/pkcs11-data_0.7.4-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b1/pkcs11-data_0.7.4-2_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.1n3WVAQv/b2/pkcs11-data_0.7.4-2_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 226ms CPU time consumed: 227ms _ _ _ _ _ _ __ | | _____ ___/ / | __| | __ _| |_ __ _ | '_ \| |/ / __/ __| | |_____ / _` |/ _` | __/ _` | | |_) | < (__\__ \ | |_____| (_| | (_| | || (_| | | .__/|_|\_\___|___/_|_| \__,_|\__,_|\__\__,_| |_| Fri Feb 21 15:10:12 UTC 2025 I: diffoscope 288 found no differences in the changes files, and a .buildinfo file also exists. Fri Feb 21 15:10:12 UTC 2025 I: pkcs11-data from trixie built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-02-21 15:10:13] INFO: Starting at 2025-02-21 15:10:13.340182 [2025-02-21 15:10:13] INFO: Generating the pages of 1 package(s) [2025-02-21 15:10:13] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/amd64/pkcs11-data didn't produce a buildlog, even though it has been built. [2025-02-21 15:10:13] INFO: Finished at 2025-02-21 15:10:13.801027, took: 0:00:00.460853 Fri Feb 21 15:10:13 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/amd64/pkcs11-data.html Fri Feb 21 15:10:13 UTC 2025 I: Submitting .buildinfo files to external archives: Fri Feb 21 15:10:13 UTC 2025 I: Submitting 8.0K b1/pkcs11-data_0.7.4-2_amd64.buildinfo.asc https://buildinfo.debian.net/d2fbe3bacc717fcdb32c2e3ae25b35978e78ffee/pkcs11-data_0.7.4-2_amd64 Fri Feb 21 15:10:15 UTC 2025 I: Submitting 8.0K b2/pkcs11-data_0.7.4-2_amd64.buildinfo.asc https://buildinfo.debian.net/5de6df13b749baaef29028d94c1f5484101d20af/pkcs11-data_0.7.4-2_amd64 Fri Feb 21 15:10:16 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Feb 21 15:10:16 UTC 2025 I: Done submitting .buildinfo files. Fri Feb 21 15:10:16 UTC 2025 I: Removing signed pkcs11-data_0.7.4-2_amd64.buildinfo.asc files: removed './b1/pkcs11-data_0.7.4-2_amd64.buildinfo.asc' removed './b2/pkcs11-data_0.7.4-2_amd64.buildinfo.asc' 1740150616 amd64 trixie pkcs11-data Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/pkcs11-data_0.7.4-2.rbuild.log: 74.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/pkcs11-data_0.7.4-2.rbuild.log.gz [2025-02-21 15:10:16] INFO: Starting at 2025-02-21 15:10:16.444083 [2025-02-21 15:10:16] INFO: Generating the pages of 1 package(s) [2025-02-21 15:10:16] INFO: Finished at 2025-02-21 15:10:16.851060, took: 0:00:00.406985 All cleanup done. Fri Feb 21 15:10:16 UTC 2025 - total duration: 0h 2m 15s. Fri Feb 21 15:10:16 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-oX2xLEqE, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 19.463s CPU time consumed: 6.941s