Running as unit: rb-build-amd64_38-34668.service ==================================================================================== Fri Nov 22 08:38:43 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_38) on jenkins, called using "infom02-amd64 infom01-amd64" as arguments. Fri Nov 22 08:38:43 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-WZUAikgQ" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 08:38:43 UTC 2024 - checking /var/lib/jenkins/offline_nodes if infom02-amd64.debian.net is marked as down. Fri Nov 22 08:38:43 UTC 2024 - checking via ssh if infom02-amd64.debian.net is up. removed '/tmp/read-only-fs-test-NuJ3SI' Fri Nov 22 08:38:44 UTC 2024 - checking /var/lib/jenkins/offline_nodes if infom01-amd64.debian.net is marked as down. Fri Nov 22 08:38:44 UTC 2024 - checking via ssh if infom01-amd64.debian.net is up. removed '/tmp/read-only-fs-test-uOqPUF' ok, let's check if libanydata-perl is building anywhere yet… ok, libanydata-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libanydata-perl in trixie on amd64 on jenkins now. 1st build will be done on infom02-amd64.debian.net. 2nd build will be done on infom01-amd64.debian.net. ============================================================================= Fri Nov 22 08:38:59 UTC 2024 I: starting to build libanydata-perl/trixie/amd64 on jenkins on '2024-11-22 08:38' Fri Nov 22 08:38:59 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_38/34668/console.log 1732264739 amd64 trixie libanydata-perl Fri Nov 22 08:38:59 UTC 2024 I: Downloading source for trixie/libanydata-perl=0.12-3 --2024-11-22 08:38:59-- http://deb.debian.org/debian/pool/main/liba/libanydata-perl/libanydata-perl_0.12-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2439 (2.4K) [text/prs.lines.tag] Saving to: ‘libanydata-perl_0.12-3.dsc’ 0K .. 100% 344M=0s 2024-11-22 08:38:59 (344 MB/s) - ‘libanydata-perl_0.12-3.dsc’ saved [2439/2439] --2024-11-22 08:38:59-- http://deb.debian.org/debian/pool/main/liba/libanydata-perl/libanydata-perl_0.12-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2439 (2.4K) [text/prs.lines.tag] Saving to: ‘libanydata-perl_0.12-3.dsc’ 0K .. 100% 344M=0s 2024-11-22 08:38:59 (344 MB/s) - ‘libanydata-perl_0.12-3.dsc’ saved [2439/2439] Fri Nov 22 08:38:59 UTC 2024 I: libanydata-perl_0.12-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libanydata-perl Binary: libanydata-perl Architecture: all Version: 0.12-3 Maintainer: Debian Perl Group Uploaders: Ansgar Burchardt , Xavier Guimard Homepage: https://metacpan.org/release/AnyData Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libanydata-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libcgi-pm-perl , libtest-output-perl , libxml-twig-perl , perl Package-List: libanydata-perl deb perl optional arch=all Checksums-Sha1: 613b45e330588fb3564e5a570dbf1f7d43b01cd8 59851 libanydata-perl_0.12.orig.tar.gz dfbdece7e3db20b0229e71431ec7e1e481e671ef 3972 libanydata-perl_0.12-3.debian.tar.xz Checksums-Sha256: be6a957f04a2feba9b305536b132deceba1f455db295b221a63e75567fadbcfc 59851 libanydata-perl_0.12.orig.tar.gz b0c0009a250e37367525a68dabc9857d51b4bc08cb6f01567a86652bf9dafd8d 3972 libanydata-perl_0.12-3.debian.tar.xz Files: 8f94caa4c3b354f407e047496ba53dba 59851 libanydata-perl_0.12.orig.tar.gz 15e28df713a5052ded6ae27e68bf6bd0 3972 libanydata-perl_0.12-3.debian.tar.xz Dgit: 8c0b6059e6b185b6365af32739cb82b9a360b4a2 debian archive/debian/0.12-3 https://git.dgit.debian.org/libanydata-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmTO9AJfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgb9GQ//bcfT3EO1TChVykUAT9Q6/0FUthReA9kapgE73U8QTqBOVNFVwAqw6pXX 49Lh6sgrITtEJSwz+0FE3HLS1FO5B2TlhKQIfkzm33a1hlJpqfRqtkin3nltfSjS C/e39agf+s2X9NvnAL5Da3UCQq7H2X0k1TxhywjgabflC0z1wpC6iE2bzZX5uylj OmAiEDzM/o9yMm7VlX+ugbkvlRA/ca8mA+/Sp1X9WYUAbWY5eQ6Ra1gOHBMj6El6 IH3CdFvawpq+YZeR6VMVvQVvhbQ8cq2I7LwxJIwntQpHn5xOk4TN3qnlatDhqcYm vdeWtcl18NFEv0ddiijrcQALd+CpwY0RGVzP7eTMwzhjRgr1naNUwkYx8hP4uN4Y 5GRIM3iFtKIP1yoN0IyUXsyuk1eLoT39qrb5uW/C0uGwqAuVWJv9DJ2Uc363KRoD aWK2p6YSpFWFGnu3PhO84qOaKpsxMRzdLL8dBx7i+qLfWOJOZLc0KFpOKkEOR5So JbSMffbL4f808mqf+OULJZ3o40Z0//9FcAolrPcTamxFkAVUSJSUY6mjaLxyprC/ H2TSbazfBA8w63xuMR4UvRPs2ahLvTMq5AExuORtE/DeV9EpYq5s9NqiNSEHrQ5e ojiqRBlhuJvKke+nFxYQKbzjBe4GDr2py0t2Q5SxifYnfvw9AT4= =bSPT -----END PGP SIGNATURE----- Fri Nov 22 08:38:59 UTC 2024 I: Checking whether the package is not for us Fri Nov 22 08:38:59 UTC 2024 I: Starting 1st build on remote node infom02-amd64.debian.net. Fri Nov 22 08:38:59 UTC 2024 I: Preparing to do remote build '1' on infom02-amd64.debian.net. Fri Nov 22 08:38:59 UTC 2024 - checking /var/lib/jenkins/offline_nodes if infom02-amd64.debian.net is marked as down. Fri Nov 22 08:38:59 UTC 2024 - checking via ssh if infom02-amd64.debian.net is up. removed '/tmp/read-only-fs-test-L1QwHO' ==================================================================================== Thu Dec 25 15:02:01 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on infom02-amd64, called using "1 libanydata-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4 0.12-3" as arguments. Thu Dec 25 15:02:01 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-jxuNKcpT" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Dec 25 15:02:01 UTC 2025 I: Downloading source for trixie/libanydata-perl=0.12-3 Reading package lists... NOTICE: 'libanydata-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 66.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (dsc) [2439 B] Get:2 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (tar) [59.9 kB] Get:3 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (diff) [3972 B] Fetched 66.3 kB in 0s (667 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libanydata-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 66.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (dsc) [2439 B] Get:2 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (tar) [59.9 kB] Get:3 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (diff) [3972 B] Fetched 66.3 kB in 0s (667 kB/s) Download complete and in download only mode ============================================================================= Building libanydata-perl in trixie on amd64 on infom02-amd64 now. Date: Thu Dec 25 15:02:01 UTC 2025 Date UTC: Thu Dec 25 15:02:01 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 03:02:01 -12 2025 I: pbuilder-time-stamp: 1766674921 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libanydata-perl_0.12-3.dsc] I: copying [./libanydata-perl_0.12.orig.tar.gz] I: copying [./libanydata-perl_0.12-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Aug 6 01:14:42 2023 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libanydata-perl_0.12-3.dsc: no acceptable signature found dpkg-source: info: extracting libanydata-perl in libanydata-perl-0.12 dpkg-source: info: unpacking libanydata-perl_0.12.orig.tar.gz dpkg-source: info: unpacking libanydata-perl_0.12-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying auto-gitignore I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/4037169/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='fac7ba421dc04201af572cd09cd26608' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='4037169' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_irFS --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1 --logfile b1/build.log libanydata-perl_0.12-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom02-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/4037169/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcgi-pm-perl, libtest-output-perl, libxml-twig-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcgi-pm-perl; however: Package libcgi-pm-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-output-perl; however: Package libtest-output-perl is not installed. pbuilder-satisfydepends-dummy depends on libxml-twig-perl; however: Package libxml-twig-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libcgi-pm-perl{a} libclone-perl{a} libdebhelper-perl{a} libelf1t64{a} libencode-locale-perl{a} libexpat1{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libnet-http-perl{a} libnet-ssleay-perl{a} libpipeline1{a} libtest-output-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml-parser-perl{a} libxml-twig-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl libtext-iconv-perl libtie-ixhash-perl libxml-xpath-perl libxml-xpathengine-perl lynx wget 0 packages upgraded, 60 newly installed, 0 to remove and 0 not upgraded. Need to get 23.6 MB of archives. After unpacking 85.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 openssl amd64 3.3.2-2 [1382 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 ca-certificates all 20240203 [158 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libcapture-tiny-perl all 0.48-2 [24.6 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 liburi-perl all 5.30-1 [105 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libhtml-parser-perl amd64 3.83-1+b1 [99.7 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libcgi-pm-perl all 4.66-1 [217 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libclone-perl amd64 0.47-1+b1 [13.9 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.4-1 [106 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libio-html-perl all 1.004-3 [16.2 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 47 http://deb.debian.org/debian trixie/main amd64 libhttp-message-perl all 7.00-2 [79.8 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 perl-openssl-defaults amd64 7+b2 [6724 B] Get: 51 http://deb.debian.org/debian trixie/main amd64 libnet-ssleay-perl amd64 1.94-2 [339 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 libtry-tiny-perl all 0.32-1 [22.9 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 56 http://deb.debian.org/debian trixie/main amd64 libwww-perl all 6.77-1 [183 kB] Get: 57 http://deb.debian.org/debian trixie/main amd64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 58 http://deb.debian.org/debian trixie/main amd64 libtest-output-perl all 1.034-1 [16.0 kB] Get: 59 http://deb.debian.org/debian trixie/main amd64 libxml-parser-perl amd64 2.47-1+b3 [198 kB] Get: 60 http://deb.debian.org/debian trixie/main amd64 libxml-twig-perl all 1:3.52-3 [177 kB] Fetched 23.6 MB in 1s (32.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_3.3.2-2_amd64.deb ... Unpacking openssl (3.3.2-2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../11-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../24-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../26-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../32-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../33-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../34-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libhtml-parser-perl:amd64. Preparing to unpack .../35-libhtml-parser-perl_3.83-1+b1_amd64.deb ... Unpacking libhtml-parser-perl:amd64 (3.83-1+b1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../36-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libclone-perl:amd64. Preparing to unpack .../37-libclone-perl_0.47-1+b1_amd64.deb ... Unpacking libclone-perl:amd64 (0.47-1+b1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../38-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../39-libexpat1_2.6.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.4-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../40-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../41-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../42-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../43-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../44-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../45-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../46-libhttp-message-perl_7.00-2_all.deb ... Unpacking libhttp-message-perl (7.00-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../47-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../48-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package perl-openssl-defaults:amd64. Preparing to unpack .../49-perl-openssl-defaults_7+b2_amd64.deb ... Unpacking perl-openssl-defaults:amd64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:amd64. Preparing to unpack .../50-libnet-ssleay-perl_1.94-2_amd64.deb ... Unpacking libnet-ssleay-perl:amd64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../51-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../52-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../53-libtry-tiny-perl_0.32-1_all.deb ... Unpacking libtry-tiny-perl (0.32-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../54-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../55-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libtest-output-perl. Preparing to unpack .../57-libtest-output-perl_1.034-1_all.deb ... Unpacking libtest-output-perl (1.034-1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../58-libxml-parser-perl_2.47-1+b3_amd64.deb ... Unpacking libxml-parser-perl (2.47-1+b3) ... Selecting previously unselected package libxml-twig-perl. Preparing to unpack .../59-libxml-twig-perl_1%3a3.52-3_all.deb ... Unpacking libxml-twig-perl (1:3.52-3) ... Setting up libexpat1:amd64 (2.6.4-1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libclone-perl:amd64 (0.47-1+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.20) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up libtry-tiny-perl (0.32-1) ... Setting up perl-openssl-defaults:amd64 (7+b2) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libio-html-perl (1.004-3) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up openssl (3.3.2-2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:amd64 (1.94-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.22.5-2) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libtool (2.4.7-8) ... Setting up libnet-http-perl (6.23-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up libtest-output-perl (1.034-1) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:amd64 (3.83-1+b1) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libhttp-message-perl (7.00-2) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Setting up libwww-perl (6.77-1) ... Setting up libxml-parser-perl (2.47-1+b3) ... Setting up libxml-twig-perl (1:3.52-3) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libanydata-perl-0.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libanydata-perl_0.12-3_source.changes dpkg-buildpackage: info: source package libanydata-perl dpkg-buildpackage: info: source version 0.12-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanydata-perl-0.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanydata-perl-0.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Warning: the following files are missing in your kit: MANIFEST.SKIP Please inform the author. Generating a Unix-style Makefile Writing Makefile for AnyData Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' cp lib/AnyData/Format/HTMLtable.pm blib/lib/AnyData/Format/HTMLtable.pm cp lib/AnyData/Format/XML.pm blib/lib/AnyData/Format/XML.pm cp lib/AnyData/Storage/PassThru.pm blib/lib/AnyData/Storage/PassThru.pm cp lib/AnyData/Storage/File.pm blib/lib/AnyData/Storage/File.pm cp lib/AnyData/Format/FileSys.pm blib/lib/AnyData/Format/FileSys.pm cp lib/AnyData/Format/Ini.pm blib/lib/AnyData/Format/Ini.pm cp lib/AnyData/Format/CSV.pm blib/lib/AnyData/Format/CSV.pm cp lib/AnyData.pm blib/lib/AnyData.pm cp lib/AnyData/Format/Fixed.pm blib/lib/AnyData/Format/Fixed.pm cp lib/AnyData/Storage/RAM.pm blib/lib/AnyData/Storage/RAM.pm cp lib/AnyData/Format/Passwd.pm blib/lib/AnyData/Format/Passwd.pm cp lib/AnyData/Storage/TiedHash.pm blib/lib/AnyData/Storage/TiedHash.pm cp lib/AnyData/Storage/FileSys.pm blib/lib/AnyData/Storage/FileSys.pm cp lib/AnyData/Format/Weblog.pm blib/lib/AnyData/Format/Weblog.pm cp lib/AnyData/Format/Mp3.pm blib/lib/AnyData/Format/Mp3.pm cp lib/AnyData/Format/Base.pm blib/lib/AnyData/Format/Base.pm cp lib/AnyData/Format/Text.pm blib/lib/AnyData/Format/Text.pm cp lib/AnyData/Format/Tab.pm blib/lib/AnyData/Format/Tab.pm cp lib/AnyData/Storage/File.pod blib/lib/AnyData/Storage/File.pod cp lib/AnyData/Format/Paragraph.pm blib/lib/AnyData/Format/Paragraph.pm cp lib/AnyData/Format/Pipe.pm blib/lib/AnyData/Format/Pipe.pm Manifying 13 pod documents make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t t/56962.t ...... skipped: extra test for RT#56962 - needs DBI & DBD::AnyData t/api.t ........ 1..2 ok 1 - export fixed format ok 2 - Failed rows ok t/fixed.t ...... 1..6 ok 1 - Failed rows ok 2 - select one ok 3 - select another ok 4 - select another ok 5 - select another ok 6 - export fixed format ok t/htmltable.t .. 1..3 ok 1 - Failed rows ok 2 - open file ok 3 - xml export ok ok t/test.t ....... 1..36 ok 1 - Failed single select ok 2 - Failed multiple select ok 3 - Failed names ok 4 - Failed rows ok 5 - total number of rows ok 6 - distinct countries ok 7 - Failed single select ok 8 - Failed multiple select ok 9 - Failed names ok 10 - Failed rows ok 11 - total number of rows ok 12 - distinct countries ok 13 - Failed single select ok 14 - Failed multiple select ok 15 - Failed names ok 16 - Failed rows ok 17 - total number of rows ok 18 - distinct countries ok 19 - Failed single select ok 20 - Failed multiple select ok 21 - Failed names ok 22 - Failed rows ok 23 - total number of rows ok 24 - distinct countries ok 25 - Failed single select ok 26 - Failed multiple select ok 27 - Failed names ok 28 - Failed rows ok 29 - total number of rows ok 30 - distinct countries ok 31 - Failed single select ok 32 - Failed multiple select ok 33 - Failed names ok 34 - Failed rows ok 35 - total number of rows ok 36 - distinct countries ok t/weblog.t ..... 1..10 ok 1 - Failed rows ok 2 - remotehost ok 3 - username ok 4 - authuser ok 5 - date ok 6 - request ok 7 - status ok 8 - bytes ok 9 - client "Mozilla/5.0 (Windows; U; Windows NT 6.0; sv-SE; rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12" ok 10 - referer: "http://www.example.com/" ok t/xml.t ........ 1..3 ok 1 - Failed rows ok 2 - open file ok 3 - xml export ok ok All tests successful. Files=7, Tests=60, 0 wallclock secs ( 0.04 usr 0.02 sys + 0.62 cusr 0.14 csys = 0.82 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libanydata-perl/ make -j12 install DESTDIR=/build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' Manifying 13 pod documents Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/HTMLtable.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Tab.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Passwd.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Paragraph.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/CSV.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Text.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Pipe.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Mp3.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Base.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Weblog.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Fixed.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Ini.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/FileSys.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/XML.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/PassThru.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pod Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/TiedHash.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/RAM.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/FileSys.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::XML.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Pipe.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Fixed.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Paragraph.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::CSV.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Tab.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Ini.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Weblog.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::HTMLtable.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Passwd.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Storage::File.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Mp3.3pm make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libanydata-perl' in '../libanydata-perl_0.12-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libanydata-perl_0.12-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libanydata-perl_0.12-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/4037169 and its subdirectories I: Current time: Thu Dec 25 03:02:58 -12 2025 I: pbuilder-time-stamp: 1766674978 Thu Dec 25 15:02:58 UTC 2025 I: Signing ./b1/libanydata-perl_0.12-3_amd64.buildinfo as libanydata-perl_0.12-3_amd64.buildinfo.asc Thu Dec 25 15:02:58 UTC 2025 I: Signed ./b1/libanydata-perl_0.12-3_amd64.buildinfo as ./b1/libanydata-perl_0.12-3_amd64.buildinfo.asc Thu Dec 25 15:02:58 UTC 2025 - build #1 for libanydata-perl/trixie/amd64 on infom02-amd64 done. Starting cleanup. All cleanup done. Thu Dec 25 15:02:58 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-jxuNKcpT, removing. /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 08:39 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 08:38 b2 -rw-r--r-- 1 jenkins jenkins 2439 Aug 6 2023 libanydata-perl_0.12-3.dsc -rw------- 1 jenkins jenkins 3591 Nov 22 08:38 rbuildlog.XHiE31z /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1: total 144 -rw-r--r-- 1 jenkins jenkins 37323 Nov 22 08:39 build.log -rw-r--r-- 1 jenkins jenkins 3972 Nov 22 08:39 libanydata-perl_0.12-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2439 Nov 22 08:39 libanydata-perl_0.12-3.dsc -rw-r--r-- 1 jenkins jenkins 71664 Nov 22 08:39 libanydata-perl_0.12-3_all.deb -rw-r--r-- 1 jenkins jenkins 5686 Nov 22 08:39 libanydata-perl_0.12-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6568 Nov 22 08:39 libanydata-perl_0.12-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1461 Nov 22 08:39 libanydata-perl_0.12-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 1618 Nov 22 08:39 libanydata-perl_0.12-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2: total 0 Fri Nov 22 08:39:59 UTC 2024 I: Deleting $TMPDIR on infom02-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 03:02:01 -12 2025 I: pbuilder-time-stamp: 1766674921 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libanydata-perl_0.12-3.dsc] I: copying [./libanydata-perl_0.12.orig.tar.gz] I: copying [./libanydata-perl_0.12-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Aug 6 01:14:42 2023 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libanydata-perl_0.12-3.dsc: no acceptable signature found dpkg-source: info: extracting libanydata-perl in libanydata-perl-0.12 dpkg-source: info: unpacking libanydata-perl_0.12.orig.tar.gz dpkg-source: info: unpacking libanydata-perl_0.12-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying auto-gitignore I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/4037169/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='fac7ba421dc04201af572cd09cd26608' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='4037169' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_irFS --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1 --logfile b1/build.log libanydata-perl_0.12-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom02-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/4037169/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcgi-pm-perl, libtest-output-perl, libxml-twig-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcgi-pm-perl; however: Package libcgi-pm-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-output-perl; however: Package libtest-output-perl is not installed. pbuilder-satisfydepends-dummy depends on libxml-twig-perl; however: Package libxml-twig-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libcgi-pm-perl{a} libclone-perl{a} libdebhelper-perl{a} libelf1t64{a} libencode-locale-perl{a} libexpat1{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libnet-http-perl{a} libnet-ssleay-perl{a} libpipeline1{a} libtest-output-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml-parser-perl{a} libxml-twig-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl libtext-iconv-perl libtie-ixhash-perl libxml-xpath-perl libxml-xpathengine-perl lynx wget 0 packages upgraded, 60 newly installed, 0 to remove and 0 not upgraded. Need to get 23.6 MB of archives. After unpacking 85.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 openssl amd64 3.3.2-2 [1382 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 ca-certificates all 20240203 [158 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libcapture-tiny-perl all 0.48-2 [24.6 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 liburi-perl all 5.30-1 [105 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libhtml-parser-perl amd64 3.83-1+b1 [99.7 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libcgi-pm-perl all 4.66-1 [217 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libclone-perl amd64 0.47-1+b1 [13.9 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.4-1 [106 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libio-html-perl all 1.004-3 [16.2 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 47 http://deb.debian.org/debian trixie/main amd64 libhttp-message-perl all 7.00-2 [79.8 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 perl-openssl-defaults amd64 7+b2 [6724 B] Get: 51 http://deb.debian.org/debian trixie/main amd64 libnet-ssleay-perl amd64 1.94-2 [339 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 libtry-tiny-perl all 0.32-1 [22.9 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 56 http://deb.debian.org/debian trixie/main amd64 libwww-perl all 6.77-1 [183 kB] Get: 57 http://deb.debian.org/debian trixie/main amd64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 58 http://deb.debian.org/debian trixie/main amd64 libtest-output-perl all 1.034-1 [16.0 kB] Get: 59 http://deb.debian.org/debian trixie/main amd64 libxml-parser-perl amd64 2.47-1+b3 [198 kB] Get: 60 http://deb.debian.org/debian trixie/main amd64 libxml-twig-perl all 1:3.52-3 [177 kB] Fetched 23.6 MB in 1s (32.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_3.3.2-2_amd64.deb ... Unpacking openssl (3.3.2-2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../11-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../24-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../26-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../32-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../33-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../34-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libhtml-parser-perl:amd64. Preparing to unpack .../35-libhtml-parser-perl_3.83-1+b1_amd64.deb ... Unpacking libhtml-parser-perl:amd64 (3.83-1+b1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../36-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libclone-perl:amd64. Preparing to unpack .../37-libclone-perl_0.47-1+b1_amd64.deb ... Unpacking libclone-perl:amd64 (0.47-1+b1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../38-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../39-libexpat1_2.6.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.4-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../40-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../41-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../42-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../43-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../44-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../45-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../46-libhttp-message-perl_7.00-2_all.deb ... Unpacking libhttp-message-perl (7.00-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../47-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../48-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package perl-openssl-defaults:amd64. Preparing to unpack .../49-perl-openssl-defaults_7+b2_amd64.deb ... Unpacking perl-openssl-defaults:amd64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:amd64. Preparing to unpack .../50-libnet-ssleay-perl_1.94-2_amd64.deb ... Unpacking libnet-ssleay-perl:amd64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../51-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../52-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../53-libtry-tiny-perl_0.32-1_all.deb ... Unpacking libtry-tiny-perl (0.32-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../54-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../55-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libtest-output-perl. Preparing to unpack .../57-libtest-output-perl_1.034-1_all.deb ... Unpacking libtest-output-perl (1.034-1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../58-libxml-parser-perl_2.47-1+b3_amd64.deb ... Unpacking libxml-parser-perl (2.47-1+b3) ... Selecting previously unselected package libxml-twig-perl. Preparing to unpack .../59-libxml-twig-perl_1%3a3.52-3_all.deb ... Unpacking libxml-twig-perl (1:3.52-3) ... Setting up libexpat1:amd64 (2.6.4-1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libclone-perl:amd64 (0.47-1+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.20) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up libtry-tiny-perl (0.32-1) ... Setting up perl-openssl-defaults:amd64 (7+b2) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libio-html-perl (1.004-3) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up openssl (3.3.2-2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:amd64 (1.94-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.22.5-2) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libtool (2.4.7-8) ... Setting up libnet-http-perl (6.23-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up libtest-output-perl (1.034-1) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:amd64 (3.83-1+b1) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libhttp-message-perl (7.00-2) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Setting up libwww-perl (6.77-1) ... Setting up libxml-parser-perl (2.47-1+b3) ... Setting up libxml-twig-perl (1:3.52-3) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libanydata-perl-0.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libanydata-perl_0.12-3_source.changes dpkg-buildpackage: info: source package libanydata-perl dpkg-buildpackage: info: source version 0.12-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanydata-perl-0.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanydata-perl-0.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Warning: the following files are missing in your kit: MANIFEST.SKIP Please inform the author. Generating a Unix-style Makefile Writing Makefile for AnyData Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' cp lib/AnyData/Format/HTMLtable.pm blib/lib/AnyData/Format/HTMLtable.pm cp lib/AnyData/Format/XML.pm blib/lib/AnyData/Format/XML.pm cp lib/AnyData/Storage/PassThru.pm blib/lib/AnyData/Storage/PassThru.pm cp lib/AnyData/Storage/File.pm blib/lib/AnyData/Storage/File.pm cp lib/AnyData/Format/FileSys.pm blib/lib/AnyData/Format/FileSys.pm cp lib/AnyData/Format/Ini.pm blib/lib/AnyData/Format/Ini.pm cp lib/AnyData/Format/CSV.pm blib/lib/AnyData/Format/CSV.pm cp lib/AnyData.pm blib/lib/AnyData.pm cp lib/AnyData/Format/Fixed.pm blib/lib/AnyData/Format/Fixed.pm cp lib/AnyData/Storage/RAM.pm blib/lib/AnyData/Storage/RAM.pm cp lib/AnyData/Format/Passwd.pm blib/lib/AnyData/Format/Passwd.pm cp lib/AnyData/Storage/TiedHash.pm blib/lib/AnyData/Storage/TiedHash.pm cp lib/AnyData/Storage/FileSys.pm blib/lib/AnyData/Storage/FileSys.pm cp lib/AnyData/Format/Weblog.pm blib/lib/AnyData/Format/Weblog.pm cp lib/AnyData/Format/Mp3.pm blib/lib/AnyData/Format/Mp3.pm cp lib/AnyData/Format/Base.pm blib/lib/AnyData/Format/Base.pm cp lib/AnyData/Format/Text.pm blib/lib/AnyData/Format/Text.pm cp lib/AnyData/Format/Tab.pm blib/lib/AnyData/Format/Tab.pm cp lib/AnyData/Storage/File.pod blib/lib/AnyData/Storage/File.pod cp lib/AnyData/Format/Paragraph.pm blib/lib/AnyData/Format/Paragraph.pm cp lib/AnyData/Format/Pipe.pm blib/lib/AnyData/Format/Pipe.pm Manifying 13 pod documents make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t t/56962.t ...... skipped: extra test for RT#56962 - needs DBI & DBD::AnyData t/api.t ........ 1..2 ok 1 - export fixed format ok 2 - Failed rows ok t/fixed.t ...... 1..6 ok 1 - Failed rows ok 2 - select one ok 3 - select another ok 4 - select another ok 5 - select another ok 6 - export fixed format ok t/htmltable.t .. 1..3 ok 1 - Failed rows ok 2 - open file ok 3 - xml export ok ok t/test.t ....... 1..36 ok 1 - Failed single select ok 2 - Failed multiple select ok 3 - Failed names ok 4 - Failed rows ok 5 - total number of rows ok 6 - distinct countries ok 7 - Failed single select ok 8 - Failed multiple select ok 9 - Failed names ok 10 - Failed rows ok 11 - total number of rows ok 12 - distinct countries ok 13 - Failed single select ok 14 - Failed multiple select ok 15 - Failed names ok 16 - Failed rows ok 17 - total number of rows ok 18 - distinct countries ok 19 - Failed single select ok 20 - Failed multiple select ok 21 - Failed names ok 22 - Failed rows ok 23 - total number of rows ok 24 - distinct countries ok 25 - Failed single select ok 26 - Failed multiple select ok 27 - Failed names ok 28 - Failed rows ok 29 - total number of rows ok 30 - distinct countries ok 31 - Failed single select ok 32 - Failed multiple select ok 33 - Failed names ok 34 - Failed rows ok 35 - total number of rows ok 36 - distinct countries ok t/weblog.t ..... 1..10 ok 1 - Failed rows ok 2 - remotehost ok 3 - username ok 4 - authuser ok 5 - date ok 6 - request ok 7 - status ok 8 - bytes ok 9 - client "Mozilla/5.0 (Windows; U; Windows NT 6.0; sv-SE; rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12" ok 10 - referer: "http://www.example.com/" ok t/xml.t ........ 1..3 ok 1 - Failed rows ok 2 - open file ok 3 - xml export ok ok All tests successful. Files=7, Tests=60, 0 wallclock secs ( 0.04 usr 0.02 sys + 0.62 cusr 0.14 csys = 0.82 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libanydata-perl/ make -j12 install DESTDIR=/build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' Manifying 13 pod documents Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/HTMLtable.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Tab.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Passwd.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Paragraph.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/CSV.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Text.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Pipe.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Mp3.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Base.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Weblog.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Fixed.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Ini.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/FileSys.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/XML.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/PassThru.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pod Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/TiedHash.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/RAM.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/FileSys.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::XML.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Pipe.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Fixed.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Paragraph.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::CSV.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Tab.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Ini.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Weblog.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::HTMLtable.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Passwd.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Storage::File.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Mp3.3pm make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libanydata-perl' in '../libanydata-perl_0.12-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libanydata-perl_0.12-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libanydata-perl_0.12-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/4037169 and its subdirectories I: Current time: Thu Dec 25 03:02:58 -12 2025 I: pbuilder-time-stamp: 1766674978 Fri Nov 22 08:39:59 UTC 2024 I: 1st build successful. Starting 2nd build on remote node infom01-amd64.debian.net. Fri Nov 22 08:39:59 UTC 2024 I: Preparing to do remote build '2' on infom01-amd64.debian.net. Fri Nov 22 08:39:59 UTC 2024 - checking /var/lib/jenkins/offline_nodes if infom01-amd64.debian.net is marked as down. Fri Nov 22 08:39:59 UTC 2024 - checking via ssh if infom01-amd64.debian.net is up. removed '/tmp/read-only-fs-test-0Rqmtv' ==================================================================================== Fri Nov 22 08:40:01 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on infom01-amd64, called using "2 libanydata-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4 0.12-3" as arguments. Fri Nov 22 08:40:01 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-rp9kAby4" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 08:40:01 UTC 2024 I: Downloading source for trixie/libanydata-perl=0.12-3 Reading package lists... NOTICE: 'libanydata-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 66.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (dsc) [2439 B] Get:2 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (tar) [59.9 kB] Get:3 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (diff) [3972 B] Fetched 66.3 kB in 0s (764 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libanydata-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libanydata-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 66.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (dsc) [2439 B] Get:2 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (tar) [59.9 kB] Get:3 http://deb.debian.org/debian trixie/main libanydata-perl 0.12-3 (diff) [3972 B] Fetched 66.3 kB in 0s (764 kB/s) Download complete and in download only mode ============================================================================= Re-Building libanydata-perl in trixie on amd64 on infom01-amd64 now. Date: Fri Nov 22 08:40:01 UTC 2024 Date UTC: Fri Nov 22 08:40:01 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4 + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_gw0P + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libanydata-perl = debian-installer -o libanydata-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libanydata-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_gw0P --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2 --logfile b2/build.log libanydata-perl_0.12-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Nov 22 22:40:01 +14 2024 I: pbuilder-time-stamp: 1732264801 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libanydata-perl_0.12-3.dsc] I: copying [./libanydata-perl_0.12.orig.tar.gz] I: copying [./libanydata-perl_0.12-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Aug 6 01:14:42 2023 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libanydata-perl_0.12-3.dsc: no acceptable signature found dpkg-source: info: extracting libanydata-perl in libanydata-perl-0.12 dpkg-source: info: unpacking libanydata-perl_0.12.orig.tar.gz dpkg-source: info: unpacking libanydata-perl_0.12-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying auto-gitignore I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D01_modify_environment starting debug: Running on infom01-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 22 08:40 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=dbedf62e60a64a44b5f171a6ee62af35 LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=177573 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_gw0P --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2 --logfile b2/build.log libanydata-perl_0.12-3.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' I: uname -a Linux i-capture-the-hostname 6.1.0-27-cloud-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcgi-pm-perl, libtest-output-perl, libxml-twig-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcgi-pm-perl; however: Package libcgi-pm-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-output-perl; however: Package libtest-output-perl is not installed. pbuilder-satisfydepends-dummy depends on libxml-twig-perl; however: Package libxml-twig-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libcgi-pm-perl{a} libclone-perl{a} libdebhelper-perl{a} libelf1t64{a} libencode-locale-perl{a} libexpat1{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libnet-http-perl{a} libnet-ssleay-perl{a} libpipeline1{a} libtest-output-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml-parser-perl{a} libxml-twig-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl libtext-iconv-perl libtie-ixhash-perl libxml-xpath-perl libxml-xpathengine-perl lynx wget 0 packages upgraded, 60 newly installed, 0 to remove and 0 not upgraded. Need to get 23.6 MB of archives. After unpacking 85.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 openssl amd64 3.3.2-2 [1382 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 ca-certificates all 20240203 [158 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.2-11 [91.5 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.22.5-2 [723 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-5+b1 [9423 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b1 [699 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.20 [915 kB] Get: 33 http://deb.debian.org/debian trixie/main amd64 libcapture-tiny-perl all 0.48-2 [24.6 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 liburi-perl all 5.30-1 [105 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libhtml-parser-perl amd64 3.83-1+b1 [99.7 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libcgi-pm-perl all 4.66-1 [217 kB] Get: 38 http://deb.debian.org/debian trixie/main amd64 libclone-perl amd64 0.47-1+b1 [13.9 kB] Get: 39 http://deb.debian.org/debian trixie/main amd64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 40 http://deb.debian.org/debian trixie/main amd64 libexpat1 amd64 2.6.4-1 [106 kB] Get: 41 http://deb.debian.org/debian trixie/main amd64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 42 http://deb.debian.org/debian trixie/main amd64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 43 http://deb.debian.org/debian trixie/main amd64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 44 http://deb.debian.org/debian trixie/main amd64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 45 http://deb.debian.org/debian trixie/main amd64 libio-html-perl all 1.004-3 [16.2 kB] Get: 46 http://deb.debian.org/debian trixie/main amd64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 47 http://deb.debian.org/debian trixie/main amd64 libhttp-message-perl all 7.00-2 [79.8 kB] Get: 48 http://deb.debian.org/debian trixie/main amd64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 49 http://deb.debian.org/debian trixie/main amd64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 50 http://deb.debian.org/debian trixie/main amd64 perl-openssl-defaults amd64 7+b2 [6724 B] Get: 51 http://deb.debian.org/debian trixie/main amd64 libnet-ssleay-perl amd64 1.94-2 [339 kB] Get: 52 http://deb.debian.org/debian trixie/main amd64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get: 53 http://deb.debian.org/debian trixie/main amd64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 54 http://deb.debian.org/debian trixie/main amd64 libtry-tiny-perl all 0.32-1 [22.9 kB] Get: 55 http://deb.debian.org/debian trixie/main amd64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 56 http://deb.debian.org/debian trixie/main amd64 libwww-perl all 6.77-1 [183 kB] Get: 57 http://deb.debian.org/debian trixie/main amd64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 58 http://deb.debian.org/debian trixie/main amd64 libtest-output-perl all 1.034-1 [16.0 kB] Get: 59 http://deb.debian.org/debian trixie/main amd64 libxml-parser-perl amd64 2.47-1+b3 [198 kB] Get: 60 http://deb.debian.org/debian trixie/main amd64 libxml-twig-perl all 1:3.52-3 [177 kB] Fetched 23.6 MB in 2s (9998 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_3.3.2-2_amd64.deb ... Unpacking openssl (3.3.2-2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.2-11_amd64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../11-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../24-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../26-libicu72_72.1-5+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-5+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../32-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../33-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../34-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libhtml-parser-perl:amd64. Preparing to unpack .../35-libhtml-parser-perl_3.83-1+b1_amd64.deb ... Unpacking libhtml-parser-perl:amd64 (3.83-1+b1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../36-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libclone-perl:amd64. Preparing to unpack .../37-libclone-perl_0.47-1+b1_amd64.deb ... Unpacking libclone-perl:amd64 (0.47-1+b1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../38-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../39-libexpat1_2.6.4-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.4-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../40-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../41-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../42-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../43-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../44-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../45-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../46-libhttp-message-perl_7.00-2_all.deb ... Unpacking libhttp-message-perl (7.00-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../47-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../48-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package perl-openssl-defaults:amd64. Preparing to unpack .../49-perl-openssl-defaults_7+b2_amd64.deb ... Unpacking perl-openssl-defaults:amd64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:amd64. Preparing to unpack .../50-libnet-ssleay-perl_1.94-2_amd64.deb ... Unpacking libnet-ssleay-perl:amd64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../51-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../52-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../53-libtry-tiny-perl_0.32-1_all.deb ... Unpacking libtry-tiny-perl (0.32-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../54-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../55-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libtest-output-perl. Preparing to unpack .../57-libtest-output-perl_1.034-1_all.deb ... Unpacking libtest-output-perl (1.034-1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../58-libxml-parser-perl_2.47-1+b3_amd64.deb ... Unpacking libxml-parser-perl (2.47-1+b3) ... Selecting previously unselected package libxml-twig-perl. Preparing to unpack .../59-libxml-twig-perl_1%3a3.52-3_all.deb ... Unpacking libxml-twig-perl (1:3.52-3) ... Setting up libexpat1:amd64 (2.6.4-1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libclone-perl:amd64 (0.47-1+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.20) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up libtry-tiny-perl (0.32-1) ... Setting up perl-openssl-defaults:amd64 (7+b2) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libio-html-perl (1.004-3) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up openssl (3.3.2-2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:amd64 (1.94-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.22.5-2) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libtool (2.4.7-8) ... Setting up libnet-http-perl (6.23-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up libtest-output-perl (1.034-1) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:amd64 (3.83-1+b1) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libhttp-message-perl (7.00-2) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Setting up libwww-perl (6.77-1) ... Setting up libxml-parser-perl (2.47-1+b3) ... Setting up libxml-twig-perl (1:3.52-3) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/177573/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/177573/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libanydata-perl-0.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libanydata-perl_0.12-3_source.changes dpkg-buildpackage: info: source package libanydata-perl dpkg-buildpackage: info: source version 0.12-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanydata-perl-0.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libanydata-perl-0.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Warning: the following files are missing in your kit: MANIFEST.SKIP Please inform the author. Generating a Unix-style Makefile Writing Makefile for AnyData Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' cp lib/AnyData/Storage/PassThru.pm blib/lib/AnyData/Storage/PassThru.pm cp lib/AnyData/Format/FileSys.pm blib/lib/AnyData/Format/FileSys.pm cp lib/AnyData/Format/Pipe.pm blib/lib/AnyData/Format/Pipe.pm cp lib/AnyData/Format/CSV.pm blib/lib/AnyData/Format/CSV.pm cp lib/AnyData/Format/Ini.pm blib/lib/AnyData/Format/Ini.pm cp lib/AnyData/Format/Base.pm blib/lib/AnyData/Format/Base.pm cp lib/AnyData/Storage/FileSys.pm blib/lib/AnyData/Storage/FileSys.pm cp lib/AnyData/Storage/RAM.pm blib/lib/AnyData/Storage/RAM.pm cp lib/AnyData/Format/XML.pm blib/lib/AnyData/Format/XML.pm cp lib/AnyData/Format/Fixed.pm blib/lib/AnyData/Format/Fixed.pm cp lib/AnyData/Storage/File.pod blib/lib/AnyData/Storage/File.pod cp lib/AnyData/Format/HTMLtable.pm blib/lib/AnyData/Format/HTMLtable.pm cp lib/AnyData/Format/Tab.pm blib/lib/AnyData/Format/Tab.pm cp lib/AnyData/Format/Weblog.pm blib/lib/AnyData/Format/Weblog.pm cp lib/AnyData.pm blib/lib/AnyData.pm cp lib/AnyData/Format/Passwd.pm blib/lib/AnyData/Format/Passwd.pm cp lib/AnyData/Format/Text.pm blib/lib/AnyData/Format/Text.pm cp lib/AnyData/Format/Mp3.pm blib/lib/AnyData/Format/Mp3.pm cp lib/AnyData/Storage/File.pm blib/lib/AnyData/Storage/File.pm cp lib/AnyData/Format/Paragraph.pm blib/lib/AnyData/Format/Paragraph.pm cp lib/AnyData/Storage/TiedHash.pm blib/lib/AnyData/Storage/TiedHash.pm Manifying 13 pod documents make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t t/56962.t ...... skipped: extra test for RT#56962 - needs DBI & DBD::AnyData t/api.t ........ 1..2 ok 1 - export fixed format ok 2 - Failed rows ok t/fixed.t ...... 1..6 ok 1 - Failed rows ok 2 - select one ok 3 - select another ok 4 - select another ok 5 - select another ok 6 - export fixed format ok t/htmltable.t .. 1..3 ok 1 - Failed rows ok 2 - open file ok 3 - xml export ok ok t/test.t ....... 1..36 ok 1 - Failed single select ok 2 - Failed multiple select ok 3 - Failed names ok 4 - Failed rows ok 5 - total number of rows ok 6 - distinct countries ok 7 - Failed single select ok 8 - Failed multiple select ok 9 - Failed names ok 10 - Failed rows ok 11 - total number of rows ok 12 - distinct countries ok 13 - Failed single select ok 14 - Failed multiple select ok 15 - Failed names ok 16 - Failed rows ok 17 - total number of rows ok 18 - distinct countries ok 19 - Failed single select ok 20 - Failed multiple select ok 21 - Failed names ok 22 - Failed rows ok 23 - total number of rows ok 24 - distinct countries ok 25 - Failed single select ok 26 - Failed multiple select ok 27 - Failed names ok 28 - Failed rows ok 29 - total number of rows ok 30 - distinct countries ok 31 - Failed single select ok 32 - Failed multiple select ok 33 - Failed names ok 34 - Failed rows ok 35 - total number of rows ok 36 - distinct countries ok t/weblog.t ..... 1..10 ok 1 - Failed rows ok 2 - remotehost ok 3 - username ok 4 - authuser ok 5 - date ok 6 - request ok 7 - status ok 8 - bytes ok 9 - client "Mozilla/5.0 (Windows; U; Windows NT 6.0; sv-SE; rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12" ok 10 - referer: "http://www.example.com/" ok t/xml.t ........ 1..3 ok 1 - Failed rows ok 2 - open file ok 3 - xml export ok ok All tests successful. Files=7, Tests=60, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.43 cusr 0.04 csys = 0.51 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libanydata-perl/ make -j12 install DESTDIR=/build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' Manifying 13 pod documents Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/TiedHash.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/RAM.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/FileSys.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pod Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/PassThru.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Fixed.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/FileSys.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Ini.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/CSV.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Passwd.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Base.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Paragraph.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Weblog.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Mp3.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/HTMLtable.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Pipe.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Text.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Tab.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/XML.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::CSV.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Ini.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::XML.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Weblog.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Storage::File.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Fixed.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Mp3.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Tab.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Paragraph.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::HTMLtable.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Pipe.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Passwd.3pm make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libanydata-perl' in '../libanydata-perl_0.12-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libanydata-perl_0.12-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libanydata-perl_0.12-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/177573/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/177573/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/177573 and its subdirectories I: Current time: Fri Nov 22 22:40:47 +14 2024 I: pbuilder-time-stamp: 1732264847 + false + set +x Fri Nov 22 08:40:47 UTC 2024 I: Signing ./b2/libanydata-perl_0.12-3_amd64.buildinfo as libanydata-perl_0.12-3_amd64.buildinfo.asc Fri Nov 22 08:40:47 UTC 2024 I: Signed ./b2/libanydata-perl_0.12-3_amd64.buildinfo as ./b2/libanydata-perl_0.12-3_amd64.buildinfo.asc Fri Nov 22 08:40:47 UTC 2024 - build #2 for libanydata-perl/trixie/amd64 on infom01-amd64 done. Starting cleanup. All cleanup done. Fri Nov 22 08:40:47 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-rp9kAby4, removing. /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4: total 56 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 08:39 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 08:40 b2 -rw-r--r-- 1 jenkins jenkins 2439 Aug 6 2023 libanydata-perl_0.12-3.dsc -rw------- 1 jenkins jenkins 41203 Nov 22 08:39 rbuildlog.XHiE31z /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1: total 148 -rw-r--r-- 1 jenkins jenkins 37323 Nov 22 08:39 build.log -rw-r--r-- 1 jenkins jenkins 3972 Nov 22 08:39 libanydata-perl_0.12-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2439 Nov 22 08:39 libanydata-perl_0.12-3.dsc -rw-r--r-- 1 jenkins jenkins 71664 Nov 22 08:39 libanydata-perl_0.12-3_all.deb -rw-r--r-- 1 jenkins jenkins 5686 Nov 22 08:39 libanydata-perl_0.12-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6568 Nov 22 08:39 libanydata-perl_0.12-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1461 Nov 22 08:39 libanydata-perl_0.12-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 1618 Nov 22 08:39 libanydata-perl_0.12-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2: total 144 -rw-r--r-- 1 jenkins jenkins 39242 Nov 22 08:40 build.log -rw-r--r-- 1 jenkins jenkins 3972 Nov 22 08:40 libanydata-perl_0.12-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2439 Nov 22 08:40 libanydata-perl_0.12-3.dsc -rw-r--r-- 1 jenkins jenkins 71664 Nov 22 08:40 libanydata-perl_0.12-3_all.deb -rw-r--r-- 1 jenkins jenkins 5683 Nov 22 08:40 libanydata-perl_0.12-3_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6565 Nov 22 08:40 libanydata-perl_0.12-3_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1461 Nov 22 08:40 libanydata-perl_0.12-3_amd64.changes -rw-r--r-- 1 jenkins jenkins 1618 Nov 22 08:40 libanydata-perl_0.12-3_source.changes Fri Nov 22 08:40:48 UTC 2024 I: Deleting $TMPDIR on infom01-amd64.debian.net. Fri Nov 22 08:40:48 UTC 2024 I: libanydata-perl_0.12-3_amd64.changes: Format: 1.8 Date: Sun, 06 Aug 2023 03:12:08 +0200 Source: libanydata-perl Binary: libanydata-perl Architecture: all Version: 0.12-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libanydata-perl - simple tied hash interface for files and data structures Changes: libanydata-perl (0.12-3) unstable; urgency=medium . * Team upload. * Add more files to debian/clean which are generated during build. * Update debian/upstream/metadata. * Declare compliance with Debian Policy 4.6.2. * Set Rules-Requires-Root: no. * Drop unneeded alternative (build) dependencies. * Annotate test-only build dependencies with . * Add empty debian/tests/pkg-perl/syntax-skip to enable autopkgtest's syntax.t tests. Checksums-Sha1: 0479bb5cd6aed823e58334a37f0b0b7d1859eb20 71664 libanydata-perl_0.12-3_all.deb f8625f8f7678464d665275cb9033b84429b8cf1c 5686 libanydata-perl_0.12-3_amd64.buildinfo Checksums-Sha256: 3ec015188028b6add540c016f3762d5691a3a45c510ffa32b259de49a24e9ec9 71664 libanydata-perl_0.12-3_all.deb 37eb0d0cd2015bdfdfa3c27b4c886708c18b720c3565592276f5c976a60f2449 5686 libanydata-perl_0.12-3_amd64.buildinfo Files: 7e8dabbc706e5aacb68603db0aad8c7a 71664 perl optional libanydata-perl_0.12-3_all.deb 3b5eb053dbf4b753bd7c7e9d70400a47 5686 perl optional libanydata-perl_0.12-3_amd64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanydata-perl_0.12-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanydata-perl_0.12-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libanydata-perl_0.12-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/libanydata-perl_0.12-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/amd64/libanydata-perl_0.12-3_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libanydata-perl_0.12-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-22 08:39:59.027693309 +0000 +++ b2/build.log 2024-11-22 08:40:47.973498418 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Dec 25 03:02:01 -12 2025 -I: pbuilder-time-stamp: 1766674921 +I: Current time: Fri Nov 22 22:40:01 +14 2024 +I: pbuilder-time-stamp: 1732264801 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -27,51 +27,83 @@ dpkg-source: info: applying auto-gitignore I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/4037169/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D01_modify_environment starting +debug: Running on infom01-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 22 08:40 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='amd64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='fac7ba421dc04201af572cd09cd26608' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='4037169' - PS1='# ' - PS2='> ' + INVOCATION_ID=dbedf62e60a64a44b5f171a6ee62af35 + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=177573 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_irFS --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1 --logfile b1/build.log libanydata-perl_0.12-3.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/pbuilderrc_gw0P --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2 --logfile b2/build.log libanydata-perl_0.12-3.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' I: uname -a - Linux infom02-amd64 6.11.5+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.11.5-1~bpo12+1 (2024-11-11) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-cloud-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/4037169/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -173,7 +205,7 @@ Get: 58 http://deb.debian.org/debian trixie/main amd64 libtest-output-perl all 1.034-1 [16.0 kB] Get: 59 http://deb.debian.org/debian trixie/main amd64 libxml-parser-perl amd64 2.47-1+b3 [198 kB] Get: 60 http://deb.debian.org/debian trixie/main amd64 libxml-twig-perl all 1:3.52-3 [177 kB] -Fetched 23.6 MB in 1s (32.5 MB/s) +Fetched 23.6 MB in 2s (9998 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19969 files and directories currently installed.) @@ -435,7 +467,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libanydata-perl-0.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libanydata-perl_0.12-3_source.changes +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libanydata-perl-0.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libanydata-perl_0.12-3_source.changes dpkg-buildpackage: info: source package libanydata-perl dpkg-buildpackage: info: source version 0.12-3 dpkg-buildpackage: info: source distribution unstable @@ -461,27 +497,27 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' -cp lib/AnyData/Format/HTMLtable.pm blib/lib/AnyData/Format/HTMLtable.pm -cp lib/AnyData/Format/XML.pm blib/lib/AnyData/Format/XML.pm cp lib/AnyData/Storage/PassThru.pm blib/lib/AnyData/Storage/PassThru.pm -cp lib/AnyData/Storage/File.pm blib/lib/AnyData/Storage/File.pm cp lib/AnyData/Format/FileSys.pm blib/lib/AnyData/Format/FileSys.pm -cp lib/AnyData/Format/Ini.pm blib/lib/AnyData/Format/Ini.pm +cp lib/AnyData/Format/Pipe.pm blib/lib/AnyData/Format/Pipe.pm cp lib/AnyData/Format/CSV.pm blib/lib/AnyData/Format/CSV.pm -cp lib/AnyData.pm blib/lib/AnyData.pm -cp lib/AnyData/Format/Fixed.pm blib/lib/AnyData/Format/Fixed.pm -cp lib/AnyData/Storage/RAM.pm blib/lib/AnyData/Storage/RAM.pm -cp lib/AnyData/Format/Passwd.pm blib/lib/AnyData/Format/Passwd.pm -cp lib/AnyData/Storage/TiedHash.pm blib/lib/AnyData/Storage/TiedHash.pm +cp lib/AnyData/Format/Ini.pm blib/lib/AnyData/Format/Ini.pm +cp lib/AnyData/Format/Base.pm blib/lib/AnyData/Format/Base.pm cp lib/AnyData/Storage/FileSys.pm blib/lib/AnyData/Storage/FileSys.pm +cp lib/AnyData/Storage/RAM.pm blib/lib/AnyData/Storage/RAM.pm +cp lib/AnyData/Format/XML.pm blib/lib/AnyData/Format/XML.pm +cp lib/AnyData/Format/Fixed.pm blib/lib/AnyData/Format/Fixed.pm +cp lib/AnyData/Storage/File.pod blib/lib/AnyData/Storage/File.pod +cp lib/AnyData/Format/HTMLtable.pm blib/lib/AnyData/Format/HTMLtable.pm +cp lib/AnyData/Format/Tab.pm blib/lib/AnyData/Format/Tab.pm cp lib/AnyData/Format/Weblog.pm blib/lib/AnyData/Format/Weblog.pm -cp lib/AnyData/Format/Mp3.pm blib/lib/AnyData/Format/Mp3.pm -cp lib/AnyData/Format/Base.pm blib/lib/AnyData/Format/Base.pm +cp lib/AnyData.pm blib/lib/AnyData.pm +cp lib/AnyData/Format/Passwd.pm blib/lib/AnyData/Format/Passwd.pm cp lib/AnyData/Format/Text.pm blib/lib/AnyData/Format/Text.pm -cp lib/AnyData/Format/Tab.pm blib/lib/AnyData/Format/Tab.pm -cp lib/AnyData/Storage/File.pod blib/lib/AnyData/Storage/File.pod +cp lib/AnyData/Format/Mp3.pm blib/lib/AnyData/Format/Mp3.pm +cp lib/AnyData/Storage/File.pm blib/lib/AnyData/Storage/File.pm cp lib/AnyData/Format/Paragraph.pm blib/lib/AnyData/Format/Paragraph.pm -cp lib/AnyData/Format/Pipe.pm blib/lib/AnyData/Format/Pipe.pm +cp lib/AnyData/Storage/TiedHash.pm blib/lib/AnyData/Storage/TiedHash.pm Manifying 13 pod documents make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_auto_test @@ -568,7 +604,7 @@ ok 3 - xml export ok ok All tests successful. -Files=7, Tests=60, 0 wallclock secs ( 0.04 usr 0.02 sys + 0.62 cusr 0.14 csys = 0.82 CPU) +Files=7, Tests=60, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.43 cusr 0.04 csys = 0.51 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' create-stamp debian/debhelper-build-stamp @@ -578,39 +614,39 @@ make[1]: Entering directory '/build/reproducible-path/libanydata-perl-0.12' Manifying 13 pod documents Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/HTMLtable.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Tab.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Passwd.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Paragraph.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/TiedHash.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/RAM.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/FileSys.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pod +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/PassThru.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Fixed.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/FileSys.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Ini.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/CSV.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Text.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Pipe.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Mp3.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Passwd.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Base.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Paragraph.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Weblog.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Fixed.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Ini.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/FileSys.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Mp3.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/HTMLtable.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Pipe.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Text.pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/Tab.pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Format/XML.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/PassThru.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pod -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/TiedHash.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/File.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/RAM.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/perl5/AnyData/Storage/FileSys.pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::XML.3pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Pipe.3pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Fixed.3pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Paragraph.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::CSV.3pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Tab.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Ini.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::XML.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Weblog.3pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::HTMLtable.3pm -Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Passwd.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Storage::File.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Fixed.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData.3pm Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Mp3.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Tab.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Paragraph.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::HTMLtable.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Pipe.3pm +Installing /build/reproducible-path/libanydata-perl-0.12/debian/libanydata-perl/usr/share/man/man3/AnyData::Format::Passwd.3pm make[1]: Leaving directory '/build/reproducible-path/libanydata-perl-0.12' dh_installdocs dh_installchangelogs @@ -633,12 +669,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/177573/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/4037169 and its subdirectories -I: Current time: Thu Dec 25 03:02:58 -12 2025 -I: pbuilder-time-stamp: 1766674978 +I: removing directory /srv/workspace/pbuilder/177573 and its subdirectories +I: Current time: Fri Nov 22 22:40:47 +14 2024 +I: pbuilder-time-stamp: 1732264847 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libanydata-perl_0.12-3.diff: 79.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/libanydata-perl_0.12-3.diff.gz b2/build.log: 78.2% -- replaced with stdout Compressing the 1st log... b1/build.log: 78.7% -- replaced with stdout Fri Nov 22 08:40:49 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libanydata-perl_trixie_amd64_1732264849 + touch /var/log/reproducible-builds/diffoscope_stamp_libanydata-perl_trixie_amd64_1732264849 + RESULT=0 + systemd-run '--description=diffoscope on libanydata-perl/0.12-3 in trixie/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_38-34668 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4 --run-session -c jenkins-reproducible-trixie-diffoscope-6a2b9fbd-582d-4cd9-a957-391d61e4db79 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/dbd-tmp-juGpYKF ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/libanydata-perl_0.12-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/libanydata-perl_0.12-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/libanydata-perl_0.12-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1/libanydata-perl_0.12-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2/libanydata-perl_0.12-3_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_38-34668.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/libanydata-perl_0.12-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/libanydata-perl_0.12-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/libanydata-perl_0.12-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b1/libanydata-perl_0.12-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.wEnrWrR4/b2/libanydata-perl_0.12-3_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.447s) 0.447s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.022s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 901ms CPU time consumed: 879ms _ _ _ _ _ _ | (_) |__ __ _ _ __ _ _ __| | __ _| |_ __ _ _ __ ___ _ __| | | | | '_ \ / _` | '_ \| | | |/ _` |/ _` | __/ _` |_____| '_ \ / _ \ '__| | | | | |_) | (_| | | | | |_| | (_| | (_| | || (_| |_____| |_) | __/ | | | |_|_|_.__/ \__,_|_| |_|\__, |\__,_|\__,_|\__\__,_| | .__/ \___|_| |_| |___/ |_| Fri Nov 22 08:40:55 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Fri Nov 22 08:40:55 UTC 2024 I: libanydata-perl from trixie built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-22 08:40:55] INFO: Starting at 2024-11-22 08:40:55.899807 [2024-11-22 08:40:55] INFO: Generating the pages of 1 package(s) [2024-11-22 08:40:56] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/amd64/libanydata-perl didn't produce a buildlog, even though it has been built. [2024-11-22 08:40:56] INFO: Finished at 2024-11-22 08:40:56.363449, took: 0:00:00.463649 Fri Nov 22 08:40:56 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/amd64/libanydata-perl.html Fri Nov 22 08:40:56 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Nov 22 08:40:56 UTC 2024 I: Submitting 8.0K b1/libanydata-perl_0.12-3_amd64.buildinfo.asc https://buildinfo.debian.net/f8625f8f7678464d665275cb9033b84429b8cf1c/libanydata-perl_0.12-3_all Fri Nov 22 08:40:57 UTC 2024 I: Submitting 8.0K b2/libanydata-perl_0.12-3_amd64.buildinfo.asc https://buildinfo.debian.net/4d8018c52cb6736818e7bb1a92eb361a6ad67e99/libanydata-perl_0.12-3_all Fri Nov 22 08:40:58 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Nov 22 08:40:58 UTC 2024 I: Done submitting .buildinfo files. Fri Nov 22 08:40:58 UTC 2024 I: Removing signed libanydata-perl_0.12-3_amd64.buildinfo.asc files: removed './b1/libanydata-perl_0.12-3_amd64.buildinfo.asc' removed './b2/libanydata-perl_0.12-3_amd64.buildinfo.asc' 1732264858 amd64 trixie libanydata-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanydata-perl_0.12-3.rbuild.log: 75.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/amd64/libanydata-perl_0.12-3.rbuild.log.gz [2024-11-22 08:40:58] INFO: Starting at 2024-11-22 08:40:58.496756 [2024-11-22 08:40:58] INFO: Generating the pages of 1 package(s) [2024-11-22 08:40:58] INFO: Finished at 2024-11-22 08:40:58.949090, took: 0:00:00.452343 All cleanup done. Fri Nov 22 08:40:59 UTC 2024 - total duration: 0h 2m 12s. Fri Nov 22 08:40:59 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-WZUAikgQ, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 15.482s CPU time consumed: 7.367s