Running as unit: rb-build-amd64_4-55720.service ==================================================================================== Fri Jun 6 10:49:47 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_amd64_4) on jenkins, called using "ionos15-amd64 ionos1-amd64" as arguments. Fri Jun 6 10:49:47 UTC 2025 - actually running "reproducible_build.sh" (md5sum 44ec6a3142940d5e9a7ab76543d96029) as "/tmp/jenkins-script-4q5mcCaN" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Jun 6 10:49:47 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos15-amd64.debian.net is marked as down. Fri Jun 6 10:49:47 UTC 2025 - checking via ssh if ionos15-amd64.debian.net is up. removed '/tmp/read-only-fs-test-3d3766' Fri Jun 6 10:49:47 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Fri Jun 6 10:49:47 UTC 2025 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-Ch9bCZ' ok, let's check if libfreecontact-perl is building anywhere yet… ok, libfreecontact-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libfreecontact-perl in unstable on amd64 on jenkins now. 1st build will be done on ionos15-amd64.debian.net. 2nd build will be done on ionos1-amd64.debian.net. ============================================================================= Fri Jun 6 10:49:56 UTC 2025 I: starting to build libfreecontact-perl/unstable/amd64 on jenkins on '2025-06-06 10:49' Fri Jun 6 10:49:56 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_4/55720/console.log 1749206996 amd64 unstable libfreecontact-perl Fri Jun 6 10:49:56 UTC 2025 I: Downloading source for unstable/libfreecontact-perl=0.08-10 --2025-06-06 10:49:56-- http://deb.debian.org/debian/pool/main/libf/libfreecontact-perl/libfreecontact-perl_0.08-10.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2208 (2.2K) [text/prs.lines.tag] Saving to: ‘libfreecontact-perl_0.08-10.dsc’ 0K .. 100% 251M=0s 2025-06-06 10:49:56 (251 MB/s) - ‘libfreecontact-perl_0.08-10.dsc’ saved [2208/2208] --2025-06-06 10:49:56-- http://deb.debian.org/debian/pool/main/libf/libfreecontact-perl/libfreecontact-perl_0.08-10.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2208 (2.2K) [text/prs.lines.tag] Saving to: ‘libfreecontact-perl_0.08-10.dsc’ 0K .. 100% 251M=0s 2025-06-06 10:49:56 (251 MB/s) - ‘libfreecontact-perl_0.08-10.dsc’ saved [2208/2208] Fri Jun 6 10:49:56 UTC 2025 I: libfreecontact-perl_0.08-10.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libfreecontact-perl Binary: libfreecontact-perl Architecture: any Version: 0.08-10 Maintainer: Debian Med Packaging Team Uploaders: Laszlo Kajan , Andreas Tille Homepage: https://rostlab.org/owiki/index.php/FreeContact Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/med-team/libfreecontact-perl Vcs-Git: https://salsa.debian.org/med-team/libfreecontact-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), architecture-is-64-bit, libextutils-xspp-perl, libfreecontact-dev, perl, debhelper Package-List: libfreecontact-perl deb perl optional arch=any Checksums-Sha1: dea098c8025b42e79227265dd74252ceedbfa007 58672 libfreecontact-perl_0.08.orig.tar.gz 474726f0c25b485c05b3bd768087d673873e50b4 4204 libfreecontact-perl_0.08-10.debian.tar.xz Checksums-Sha256: 7386762985b9e36ec13379948528f1f18e49cf799ba5436a46aa60e9cb041911 58672 libfreecontact-perl_0.08.orig.tar.gz 3278bdf6f21aad0979f6268d5ff72bcb97ed95f01803f896eaccd4ee77a156ba 4204 libfreecontact-perl_0.08-10.debian.tar.xz Files: 798e25cfc3954e027d208f62dd3fe6ea 58672 libfreecontact-perl_0.08.orig.tar.gz 2f657edd8ce4f156afc8c0c9f2e0a3b0 4204 libfreecontact-perl_0.08-10.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJCBAEBCgAsFiEE8fAHMgoDVUHwpmPKV4oElNHGRtEFAmgrFWoOHHRpbGxlYUBy a2kuZGUACgkQV4oElNHGRtFXxw/8CX9KVd8o2wF/LVyys0/iUfYsSW/9KS6JaIDV OLgykJjYPF4xm442162KKZgaYTJdHh4NxiVHwLz/4HW/ZsUvnSSxs+xDi6KZgvmf d6wfs8qCAqA3oWeh9h0WWstogKlNu9hS1kj+09Ud3UQBDq10+mMT7HxnxL/HlVv8 W/A9fvtWQeaNXKvw/n2rITCYGL2NCvHwMWvZQp2BWqt1lR8U8XR+7x2BKFdoUyiR +rp1jIozwvUfhh1L0E2RE3Un9omjGj7paDjTRruufJCnJsgZVQ+riidX9y6x9G1W Uy/tcDWHq+Dq+3Yea+3n2O3ruOb8VOdeXr4bIQEDrW4HZcc+6EioIGHJqCX9K9AJ KHAK1l1EJFywpDms2p3jV1w6PkTzF9V/Z4uDYePizLnSdZV9BXezaaDJuWqyL3Iv vE1/ZLlgvxxmy4rb/19kJZlVaDddy6KUkCPZw7TyUWhz5RgK8KG4FIso1nEhprWL t+MDnzwSfxRatGfjEmFGZkdot5cq3Nv+6hEpI/jVoLQhXkKjZgFfCbaDrZB+rP95 mUSh24UCf4C9V6RidFoChw4RAvJP1r6VQAUZEdsUy/wgwEGneCoAGMBSsMgY10MO uIOl77XYDmQ6sZWZZEdDjCgWS6pd3viRQ3KP2SKzMNes+010whGp6c4fQ0l7mgHD B8vafaE= =+9/8 -----END PGP SIGNATURE----- Fri Jun 6 10:49:56 UTC 2025 I: Checking whether the package is not for us Fri Jun 6 10:49:56 UTC 2025 I: Starting 1st build on remote node ionos15-amd64.debian.net. Fri Jun 6 10:49:56 UTC 2025 I: Preparing to do remote build '1' on ionos15-amd64.debian.net. Fri Jun 6 10:49:56 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos15-amd64.debian.net is marked as down. Fri Jun 6 10:49:56 UTC 2025 - checking via ssh if ionos15-amd64.debian.net is up. removed '/tmp/read-only-fs-test-u9KjGy' ==================================================================================== Thu Jul 9 17:12:57 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos15-amd64, called using "1 libfreecontact-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r 0.08-10" as arguments. Thu Jul 9 17:12:57 UTC 2026 - actually running "reproducible_build.sh" (md5sum 44ec6a3142940d5e9a7ab76543d96029) as "/tmp/jenkins-script-5GC7YZUr" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Jul 9 17:12:58 UTC 2026 I: Downloading source for unstable/libfreecontact-perl=0.08-10 Reading package lists... NOTICE: 'libfreecontact-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/libfreecontact-perl.git Please use: git clone https://salsa.debian.org/med-team/libfreecontact-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (dsc) [2208 B] Get:2 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (tar) [58.7 kB] Get:3 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (diff) [4204 B] Fetched 65.1 kB in 0s (1991 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libfreecontact-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/libfreecontact-perl.git Please use: git clone https://salsa.debian.org/med-team/libfreecontact-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (dsc) [2208 B] Get:2 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (tar) [58.7 kB] Get:3 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (diff) [4204 B] Fetched 65.1 kB in 0s (1991 kB/s) Download complete and in download only mode ============================================================================= Building libfreecontact-perl in unstable on amd64 on ionos15-amd64 now. Date: Thu Jul 9 17:12:58 UTC 2026 Date UTC: Thu Jul 9 17:12:58 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Jul 9 05:12:58 -12 2026 I: pbuilder-time-stamp: 1783617178 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libfreecontact-perl_0.08-10.dsc] I: copying [./libfreecontact-perl_0.08.orig.tar.gz] I: copying [./libfreecontact-perl_0.08-10.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libfreecontact-perl_0.08-10.dsc: no acceptable signature found dpkg-source: info: extracting libfreecontact-perl in libfreecontact-perl-0.08 dpkg-source: info: unpacking libfreecontact-perl_0.08.orig.tar.gz dpkg-source: info: unpacking libfreecontact-perl_0.08-10.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Fix-timing-initialization.patch dpkg-source: info: applying missing-use-carp.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1716237/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='2574a7d117704f7ebb0110f20c8f0e8d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1716237' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_q7GZ --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1 --logfile b1/build.log libfreecontact-perl_0.08-10.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.12.22+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.22-1~bpo12+1 (2025-04-25) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 12 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1716237/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), architecture-is-64-bit, libextutils-xspp-perl, libfreecontact-dev, perl, debhelper dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19850 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on architecture-is-64-bit; however: Package architecture-is-64-bit is not installed. pbuilder-satisfydepends-dummy depends on libextutils-xspp-perl; however: Package libextutils-xspp-perl is not installed. pbuilder-satisfydepends-dummy depends on libfreecontact-dev; however: Package libfreecontact-dev is not installed. pbuilder-satisfydepends-dummy depends on debhelper; however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: architecture-properties{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblas3{a} libdebhelper-perl{a} libelf1t64{a} libextutils-xspp-perl{a} libfile-stripnondeterminism-perl{a} libfreecontact-dev{a} libfreecontact0t64{a} libgfortran5{a} liblapack3{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 15.0 MB of archives. After unpacking 55.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.25 [25.0 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.1-2 [243 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41-5 [94.6 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 architecture-properties amd64 0.2.6 [2336 B] Get: 12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-8 [294 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.17-4 [862 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.1-2 [770 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-4 [539 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-1 [698 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.1-2 [1680 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.24.2 [919 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 libblas3 amd64 3.12.1-2 [160 kB] Get: 32 http://deb.debian.org/debian unstable/main amd64 libextutils-xspp-perl all 0.1800-3 [146 kB] Get: 33 http://deb.debian.org/debian unstable/main amd64 libgfortran5 amd64 14.2.0-19 [836 kB] Get: 34 http://deb.debian.org/debian unstable/main amd64 liblapack3 amd64 3.12.1-2 [2452 kB] Get: 35 http://deb.debian.org/debian unstable/main amd64 libfreecontact0t64 amd64 1.0.21-15 [82.8 kB] Get: 36 http://deb.debian.org/debian unstable/main amd64 libfreecontact-dev amd64 1.0.21-15 [91.4 kB] Fetched 15.0 MB in 0s (44.1 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19850 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.25_all.deb ... Unpacking sensible-utils (0.0.25) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2_amd64.deb ... Unpacking gettext-base (0.23.1-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-5_amd64.deb ... Unpacking bsdextrautils (2.41-5) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package architecture-properties:amd64. Preparing to unpack .../10-architecture-properties_0.2.6_amd64.deb ... Unpacking architecture-properties:amd64 (0.2.6) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-8_amd64.deb ... Unpacking m4 (1.4.19-8) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../22-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../24-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-2_amd64.deb ... Unpacking gettext (0.23.1-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libblas3:amd64. Preparing to unpack .../30-libblas3_3.12.1-2_amd64.deb ... Unpacking libblas3:amd64 (3.12.1-2) ... Selecting previously unselected package libextutils-xspp-perl. Preparing to unpack .../31-libextutils-xspp-perl_0.1800-3_all.deb ... Unpacking libextutils-xspp-perl (0.1800-3) ... Selecting previously unselected package libgfortran5:amd64. Preparing to unpack .../32-libgfortran5_14.2.0-19_amd64.deb ... Unpacking libgfortran5:amd64 (14.2.0-19) ... Selecting previously unselected package liblapack3:amd64. Preparing to unpack .../33-liblapack3_3.12.1-2_amd64.deb ... Unpacking liblapack3:amd64 (3.12.1-2) ... Selecting previously unselected package libfreecontact0t64:amd64. Preparing to unpack .../34-libfreecontact0t64_1.0.21-15_amd64.deb ... Unpacking libfreecontact0t64:amd64 (1.0.21-15) ... Selecting previously unselected package libfreecontact-dev:amd64. Preparing to unpack .../35-libfreecontact-dev_1.0.21-15_amd64.deb ... Unpacking libfreecontact-dev:amd64 (1.0.21-15) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41-5) ... Setting up libextutils-xspp-perl (0.1800-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up architecture-properties:amd64 (0.2.6) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2) ... Setting up m4 (1.4.19-8) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libblas3:amd64 (3.12.1-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/blas/libblas.so.3 to provide /usr/lib/x86_64-linux-gnu/libblas.so.3 (libblas.so.3-x86_64-linux-gnu) in auto mode Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up libgfortran5:amd64 (14.2.0-19) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.25) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up liblapack3:amd64 (3.12.1-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3 to provide /usr/lib/x86_64-linux-gnu/liblapack.so.3 (liblapack.so.3-x86_64-linux-gnu) in auto mode Setting up gettext (0.23.1-2) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up libfreecontact0t64:amd64 (1.0.21-15) ... Setting up groff-base (1.23.0-9) ... Setting up libfreecontact-dev:amd64 (1.0.21-15) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-8) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libfreecontact-perl-0.08/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libfreecontact-perl_0.08-10_source.changes dpkg-buildpackage: info: source package libfreecontact-perl dpkg-buildpackage: info: source version 0.08-10 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' rm -f Makefile.old dh_auto_clean make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_configure -- OPTIMIZE="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection" LD="'x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now" /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" "OPTIMIZE=-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection" "LD='x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for FreeContact Writing MYMETA.yml and MYMETA.json make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' Running Mkbootstrap for FreeContact () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -C++ -hiertype -noprototypes -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/perlobject.map' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' FreeContact.xs > FreeContact.xsc chmod 644 "FreeContact.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 cp lib/FreeContact.pm blib/lib/FreeContact.pm AutoSplitting blib/lib/FreeContact.pm (blib/lib/auto/FreeContact) mv FreeContact.xsc FreeContact.c g++ -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -DVERSION=\"0.08\" -DXS_VERSION=\"0.08\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" FreeContact.c cc1plus: warning: '-Werror=' argument '-Werror=implicit-function-declaration' is not valid for C++ rm -f blib/arch/auto/FreeContact/FreeContact.so 'x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong FreeContact.o -o blib/arch/auto/FreeContact/FreeContact.so \ -lfreecontact \ chmod 755 blib/arch/auto/FreeContact/FreeContact.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01FreeContact.t .. 1..3 ok 1 - use FreeContact; ok 2 - FreeContact->can(...) ok 3 - FreeContact::Predictor->can(...) ok will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 seq weight loop for 1000 seqs took 0.005525 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.092977 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) LU factorization took 7.00033 secs, inverted matrix (incl LUf) in 20.7478 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 all done in 21.0927 secs will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 561.595172234625 seq weight loop for 1000 seqs took 0.005622 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.091275 secs collected apc_mean[MI] = 0.165528914074767 aa freq sum (cell) = 0.999993945475299, pairfreq sum (cell) = 0.999988196197513 formed covariance matrix (126/126,4) cov matrix Cholesky... not positive definite, dmean dev: 0.0457782 cov matrix Cholesky... not positive definite, dmean dev: 0.0412004 cov matrix Cholesky... not positive definite, dmean dev: 0.0370804 cov matrix Cholesky... not positive definite, dmean dev: 0.0333723 cov matrix Cholesky... not positive definite, dmean dev: 0.0300351 cov matrix Cholesky... not positive definite, dmean dev: 0.0270316 cov matrix Cholesky... not positive definite, dmean dev: 0.0243284 cov matrix Cholesky... not positive definite, dmean dev: 0.0218956 cov matrix Cholesky... not positive definite, dmean dev: 0.019706 cov matrix Cholesky... not positive definite, dmean dev: 0.0177354 cov matrix Cholesky... not positive definite, dmean dev: 0.0159619 cov matrix Cholesky... not positive definite, dmean dev: 0.0143657 cov matrix Cholesky... not positive definite, dmean dev: 0.0129291 cov matrix Cholesky... shrank covariance matrix in 12.0459 secs will try rho 0.00178064, exact solution  iteration = 1 iteration = 2 iteration = 3will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.09866 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) LU factorization took 5.93026 secs, inverted matrix (incl LUf) in 17.5679 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 t/02test.t ......... 1..10 ok 1 - use FreeContact; ok 2 - An object of class 'FreeContact::Predictor' isa 'FreeContact::Predictor' ok 3 ok 4 ok 5 - precision test ok 6 - timing results test ok 7 ok 8 ok 9 - wtot test ok 10 - wtot precision test ok All tests successful. Files=2, Tests=13, 54 wallclock secs ( 0.04 usr 0.01 sys + 44.16 cusr 0.23 csys = 44.44 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libfreecontact-perl/ make -j42 install DESTDIR=/build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/FreeContact/FreeContact.so Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/FreeContact.pm Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/FreeContact/autosplit.ix Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/share/man/man3/FreeContact.3pm make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_gencontrol -- '-VDescription=FreeContact is a protein residue contact predictor optimized for speed.${Newline}Its input is a multiple sequence alignment. FreeContact can function as an${Newline}accelerated drop-in for the published contact predictors${Newline}EVfold-mfDCA of DS. Marks (2011) and${Newline}PSICOV of D. Jones (2011).${Newline}${Newline}FreeContact is accelerated by a combination of vector instructions, multiple${Newline}threads, and faster implementation of key parts.${Newline}Depending on the alignment, 8-fold or higher speedups are possible.${Newline}${Newline}A sufficiently large alignment is required for meaningful results.${Newline}As a minimum, an alignment with an effective (after-weighting) sequence count${Newline}bigger than the length of the query sequence should be used. Alignments with${Newline}tens of thousands of (effective) sequences are considered good input.${Newline}${Newline}jackhmmer(1) from the hmmer package, or hhblits(1) from hhsuite${Newline}can be used to generate the alignments, for example.' make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_md5sums dh_builddeb dpkg-deb: building package 'libfreecontact-perl-dbgsym' in '../libfreecontact-perl-dbgsym_0.08-10_amd64.deb'. dpkg-deb: building package 'libfreecontact-perl' in '../libfreecontact-perl_0.08-10_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libfreecontact-perl_0.08-10_amd64.buildinfo dpkg-genchanges --build=binary -O../libfreecontact-perl_0.08-10_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1716237 and its subdirectories I: Current time: Thu Jul 9 05:15:06 -12 2026 I: pbuilder-time-stamp: 1783617306 Thu Jul 9 17:15:06 UTC 2026 I: Signing ./b1/libfreecontact-perl_0.08-10_amd64.buildinfo as libfreecontact-perl_0.08-10_amd64.buildinfo.asc Thu Jul 9 17:15:06 UTC 2026 I: Signed ./b1/libfreecontact-perl_0.08-10_amd64.buildinfo as ./b1/libfreecontact-perl_0.08-10_amd64.buildinfo.asc Thu Jul 9 17:15:06 UTC 2026 - build #1 for libfreecontact-perl/unstable/amd64 on ionos15-amd64 done. Starting cleanup. All cleanup done. Thu Jul 9 17:15:06 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-5GC7YZUr, removing. /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Jun 6 10:52 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jun 6 10:49 b2 -rw-r--r-- 1 jenkins jenkins 2208 May 19 11:37 libfreecontact-perl_0.08-10.dsc -rw------- 1 jenkins jenkins 3396 Jun 6 10:49 rbuildlog.iteWWgR /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1: total 296 -rw-r--r-- 1 jenkins jenkins 30485 Jun 6 10:52 build.log -rw-r--r-- 1 jenkins jenkins 167576 Jun 6 10:52 libfreecontact-perl-dbgsym_0.08-10_amd64.deb -rw-r--r-- 1 jenkins jenkins 4204 Jun 6 10:52 libfreecontact-perl_0.08-10.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2208 Jun 6 10:52 libfreecontact-perl_0.08-10.dsc -rw-r--r-- 1 jenkins jenkins 5206 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6088 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1478 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.changes -rw-r--r-- 1 jenkins jenkins 63432 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.deb -rw-r--r-- 1 jenkins jenkins 1301 Jun 6 10:52 libfreecontact-perl_0.08-10_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2: total 0 Fri Jun 6 10:52:07 UTC 2025 I: Deleting $TMPDIR on ionos15-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Jul 9 05:12:58 -12 2026 I: pbuilder-time-stamp: 1783617178 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libfreecontact-perl_0.08-10.dsc] I: copying [./libfreecontact-perl_0.08.orig.tar.gz] I: copying [./libfreecontact-perl_0.08-10.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libfreecontact-perl_0.08-10.dsc: no acceptable signature found dpkg-source: info: extracting libfreecontact-perl in libfreecontact-perl-0.08 dpkg-source: info: unpacking libfreecontact-perl_0.08.orig.tar.gz dpkg-source: info: unpacking libfreecontact-perl_0.08-10.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Fix-timing-initialization.patch dpkg-source: info: applying missing-use-carp.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1716237/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='2574a7d117704f7ebb0110f20c8f0e8d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1716237' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_q7GZ --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1 --logfile b1/build.log libfreecontact-perl_0.08-10.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos15-amd64 6.12.22+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.22-1~bpo12+1 (2025-04-25) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 12 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1716237/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), architecture-is-64-bit, libextutils-xspp-perl, libfreecontact-dev, perl, debhelper dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19850 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on architecture-is-64-bit; however: Package architecture-is-64-bit is not installed. pbuilder-satisfydepends-dummy depends on libextutils-xspp-perl; however: Package libextutils-xspp-perl is not installed. pbuilder-satisfydepends-dummy depends on libfreecontact-dev; however: Package libfreecontact-dev is not installed. pbuilder-satisfydepends-dummy depends on debhelper; however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: architecture-properties{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblas3{a} libdebhelper-perl{a} libelf1t64{a} libextutils-xspp-perl{a} libfile-stripnondeterminism-perl{a} libfreecontact-dev{a} libfreecontact0t64{a} libgfortran5{a} liblapack3{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 15.0 MB of archives. After unpacking 55.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.25 [25.0 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.1-2 [243 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41-5 [94.6 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 architecture-properties amd64 0.2.6 [2336 B] Get: 12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-8 [294 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.17-4 [862 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.1-2 [770 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-4 [539 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-1 [698 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.1-2 [1680 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.24.2 [919 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 libblas3 amd64 3.12.1-2 [160 kB] Get: 32 http://deb.debian.org/debian unstable/main amd64 libextutils-xspp-perl all 0.1800-3 [146 kB] Get: 33 http://deb.debian.org/debian unstable/main amd64 libgfortran5 amd64 14.2.0-19 [836 kB] Get: 34 http://deb.debian.org/debian unstable/main amd64 liblapack3 amd64 3.12.1-2 [2452 kB] Get: 35 http://deb.debian.org/debian unstable/main amd64 libfreecontact0t64 amd64 1.0.21-15 [82.8 kB] Get: 36 http://deb.debian.org/debian unstable/main amd64 libfreecontact-dev amd64 1.0.21-15 [91.4 kB] Fetched 15.0 MB in 0s (44.1 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19850 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.25_all.deb ... Unpacking sensible-utils (0.0.25) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2_amd64.deb ... Unpacking gettext-base (0.23.1-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-5_amd64.deb ... Unpacking bsdextrautils (2.41-5) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package architecture-properties:amd64. Preparing to unpack .../10-architecture-properties_0.2.6_amd64.deb ... Unpacking architecture-properties:amd64 (0.2.6) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-8_amd64.deb ... Unpacking m4 (1.4.19-8) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../22-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../24-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-2_amd64.deb ... Unpacking gettext (0.23.1-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libblas3:amd64. Preparing to unpack .../30-libblas3_3.12.1-2_amd64.deb ... Unpacking libblas3:amd64 (3.12.1-2) ... Selecting previously unselected package libextutils-xspp-perl. Preparing to unpack .../31-libextutils-xspp-perl_0.1800-3_all.deb ... Unpacking libextutils-xspp-perl (0.1800-3) ... Selecting previously unselected package libgfortran5:amd64. Preparing to unpack .../32-libgfortran5_14.2.0-19_amd64.deb ... Unpacking libgfortran5:amd64 (14.2.0-19) ... Selecting previously unselected package liblapack3:amd64. Preparing to unpack .../33-liblapack3_3.12.1-2_amd64.deb ... Unpacking liblapack3:amd64 (3.12.1-2) ... Selecting previously unselected package libfreecontact0t64:amd64. Preparing to unpack .../34-libfreecontact0t64_1.0.21-15_amd64.deb ... Unpacking libfreecontact0t64:amd64 (1.0.21-15) ... Selecting previously unselected package libfreecontact-dev:amd64. Preparing to unpack .../35-libfreecontact-dev_1.0.21-15_amd64.deb ... Unpacking libfreecontact-dev:amd64 (1.0.21-15) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41-5) ... Setting up libextutils-xspp-perl (0.1800-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up architecture-properties:amd64 (0.2.6) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2) ... Setting up m4 (1.4.19-8) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libblas3:amd64 (3.12.1-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/blas/libblas.so.3 to provide /usr/lib/x86_64-linux-gnu/libblas.so.3 (libblas.so.3-x86_64-linux-gnu) in auto mode Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up libgfortran5:amd64 (14.2.0-19) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.25) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up liblapack3:amd64 (3.12.1-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3 to provide /usr/lib/x86_64-linux-gnu/liblapack.so.3 (liblapack.so.3-x86_64-linux-gnu) in auto mode Setting up gettext (0.23.1-2) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up libfreecontact0t64:amd64 (1.0.21-15) ... Setting up groff-base (1.23.0-9) ... Setting up libfreecontact-dev:amd64 (1.0.21-15) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-8) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libfreecontact-perl-0.08/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libfreecontact-perl_0.08-10_source.changes dpkg-buildpackage: info: source package libfreecontact-perl dpkg-buildpackage: info: source version 0.08-10 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' rm -f Makefile.old dh_auto_clean make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_configure -- OPTIMIZE="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection" LD="'x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now" /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" "OPTIMIZE=-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection" "LD='x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for FreeContact Writing MYMETA.yml and MYMETA.json make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_build make -j42 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' Running Mkbootstrap for FreeContact () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -C++ -hiertype -noprototypes -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/perlobject.map' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' FreeContact.xs > FreeContact.xsc chmod 644 "FreeContact.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 cp lib/FreeContact.pm blib/lib/FreeContact.pm AutoSplitting blib/lib/FreeContact.pm (blib/lib/auto/FreeContact) mv FreeContact.xsc FreeContact.c g++ -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -DVERSION=\"0.08\" -DXS_VERSION=\"0.08\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" FreeContact.c cc1plus: warning: '-Werror=' argument '-Werror=implicit-function-declaration' is not valid for C++ rm -f blib/arch/auto/FreeContact/FreeContact.so 'x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong FreeContact.o -o blib/arch/auto/FreeContact/FreeContact.so \ -lfreecontact \ chmod 755 blib/arch/auto/FreeContact/FreeContact.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_test make -j42 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01FreeContact.t .. 1..3 ok 1 - use FreeContact; ok 2 - FreeContact->can(...) ok 3 - FreeContact::Predictor->can(...) ok will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 seq weight loop for 1000 seqs took 0.005525 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.092977 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) LU factorization took 7.00033 secs, inverted matrix (incl LUf) in 20.7478 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 all done in 21.0927 secs will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 561.595172234625 seq weight loop for 1000 seqs took 0.005622 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.091275 secs collected apc_mean[MI] = 0.165528914074767 aa freq sum (cell) = 0.999993945475299, pairfreq sum (cell) = 0.999988196197513 formed covariance matrix (126/126,4) cov matrix Cholesky... not positive definite, dmean dev: 0.0457782 cov matrix Cholesky... not positive definite, dmean dev: 0.0412004 cov matrix Cholesky... not positive definite, dmean dev: 0.0370804 cov matrix Cholesky... not positive definite, dmean dev: 0.0333723 cov matrix Cholesky... not positive definite, dmean dev: 0.0300351 cov matrix Cholesky... not positive definite, dmean dev: 0.0270316 cov matrix Cholesky... not positive definite, dmean dev: 0.0243284 cov matrix Cholesky... not positive definite, dmean dev: 0.0218956 cov matrix Cholesky... not positive definite, dmean dev: 0.019706 cov matrix Cholesky... not positive definite, dmean dev: 0.0177354 cov matrix Cholesky... not positive definite, dmean dev: 0.0159619 cov matrix Cholesky... not positive definite, dmean dev: 0.0143657 cov matrix Cholesky... not positive definite, dmean dev: 0.0129291 cov matrix Cholesky... shrank covariance matrix in 12.0459 secs will try rho 0.00178064, exact solution  iteration = 1 iteration = 2 iteration = 3will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.09866 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) LU factorization took 5.93026 secs, inverted matrix (incl LUf) in 17.5679 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 t/02test.t ......... 1..10 ok 1 - use FreeContact; ok 2 - An object of class 'FreeContact::Predictor' isa 'FreeContact::Predictor' ok 3 ok 4 ok 5 - precision test ok 6 - timing results test ok 7 ok 8 ok 9 - wtot test ok 10 - wtot precision test ok All tests successful. Files=2, Tests=13, 54 wallclock secs ( 0.04 usr 0.01 sys + 44.16 cusr 0.23 csys = 44.44 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libfreecontact-perl/ make -j42 install DESTDIR=/build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/FreeContact/FreeContact.so Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/FreeContact.pm Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/FreeContact/autosplit.ix Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/share/man/man3/FreeContact.3pm make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_gencontrol -- '-VDescription=FreeContact is a protein residue contact predictor optimized for speed.${Newline}Its input is a multiple sequence alignment. FreeContact can function as an${Newline}accelerated drop-in for the published contact predictors${Newline}EVfold-mfDCA of DS. Marks (2011) and${Newline}PSICOV of D. Jones (2011).${Newline}${Newline}FreeContact is accelerated by a combination of vector instructions, multiple${Newline}threads, and faster implementation of key parts.${Newline}Depending on the alignment, 8-fold or higher speedups are possible.${Newline}${Newline}A sufficiently large alignment is required for meaningful results.${Newline}As a minimum, an alignment with an effective (after-weighting) sequence count${Newline}bigger than the length of the query sequence should be used. Alignments with${Newline}tens of thousands of (effective) sequences are considered good input.${Newline}${Newline}jackhmmer(1) from the hmmer package, or hhblits(1) from hhsuite${Newline}can be used to generate the alignments, for example.' make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_md5sums dh_builddeb dpkg-deb: building package 'libfreecontact-perl-dbgsym' in '../libfreecontact-perl-dbgsym_0.08-10_amd64.deb'. dpkg-deb: building package 'libfreecontact-perl' in '../libfreecontact-perl_0.08-10_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libfreecontact-perl_0.08-10_amd64.buildinfo dpkg-genchanges --build=binary -O../libfreecontact-perl_0.08-10_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1716237 and its subdirectories I: Current time: Thu Jul 9 05:15:06 -12 2026 I: pbuilder-time-stamp: 1783617306 Fri Jun 6 10:52:07 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos1-amd64.debian.net. Fri Jun 6 10:52:07 UTC 2025 I: Preparing to do remote build '2' on ionos1-amd64.debian.net. Fri Jun 6 10:52:07 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos1-amd64.debian.net is marked as down. Fri Jun 6 10:52:07 UTC 2025 - checking via ssh if ionos1-amd64.debian.net is up. removed '/tmp/read-only-fs-test-G6tLtV' ==================================================================================== Fri Jun 6 10:52:08 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos1-amd64, called using "2 libfreecontact-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r 0.08-10" as arguments. Fri Jun 6 10:52:08 UTC 2025 - actually running "reproducible_build.sh" (md5sum 44ec6a3142940d5e9a7ab76543d96029) as "/tmp/jenkins-script-G2MHjJZE" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Jun 6 10:52:08 UTC 2025 I: Downloading source for unstable/libfreecontact-perl=0.08-10 Reading package lists... NOTICE: 'libfreecontact-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/libfreecontact-perl.git Please use: git clone https://salsa.debian.org/med-team/libfreecontact-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (dsc) [2208 B] Get:2 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (tar) [58.7 kB] Get:3 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (diff) [4204 B] Fetched 65.1 kB in 0s (3123 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libfreecontact-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/med-team/libfreecontact-perl.git Please use: git clone https://salsa.debian.org/med-team/libfreecontact-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (dsc) [2208 B] Get:2 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (tar) [58.7 kB] Get:3 http://deb.debian.org/debian unstable/main libfreecontact-perl 0.08-10 (diff) [4204 B] Fetched 65.1 kB in 0s (3123 kB/s) Download complete and in download only mode ============================================================================= Re-Building libfreecontact-perl in unstable on amd64 on ionos1-amd64 now. Date: Fri Jun 6 10:52:08 UTC 2025 Date UTC: Fri Jun 6 10:52:08 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_ooZb + case ${ARCH} in + case $ARCH in + locale=et_EE + language=et + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libfreecontact-perl = debian-installer -o libfreecontact-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libfreecontact-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_ooZb --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2 --logfile b2/build.log libfreecontact-perl_0.08-10.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Sat Jun 7 00:52:08 +14 2025 I: pbuilder-time-stamp: 1749207128 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libfreecontact-perl_0.08-10.dsc] I: copying [./libfreecontact-perl_0.08.orig.tar.gz] I: copying [./libfreecontact-perl_0.08-10.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libfreecontact-perl_0.08-10.dsc: no acceptable signature found dpkg-source: info: extracting libfreecontact-perl in libfreecontact-perl-0.08 dpkg-source: info: unpacking libfreecontact-perl_0.08.orig.tar.gz dpkg-source: info: unpacking libfreecontact-perl_0.08-10.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Fix-timing-initialization.patch dpkg-source: info: applying missing-use-carp.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D01_modify_environment starting debug: Running on ionos1-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Jun 6 10:52 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=40 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=e3605e5deb8844149ced80b5d65740df LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=448237 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_ooZb --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2 --logfile b2/build.log libfreecontact-perl_0.08-10.dsc' SUDO_GID=110 SUDO_UID=105 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-37-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.140-1 (2025-05-22) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 12 19:25 /bin -> usr/bin I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), architecture-is-64-bit, libextutils-xspp-perl, libfreecontact-dev, perl, debhelper dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19850 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on architecture-is-64-bit; however: Package architecture-is-64-bit is not installed. pbuilder-satisfydepends-dummy depends on libextutils-xspp-perl; however: Package libextutils-xspp-perl is not installed. pbuilder-satisfydepends-dummy depends on libfreecontact-dev; however: Package libfreecontact-dev is not installed. pbuilder-satisfydepends-dummy depends on debhelper; however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: architecture-properties{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblas3{a} libdebhelper-perl{a} libelf1t64{a} libextutils-xspp-perl{a} libfile-stripnondeterminism-perl{a} libfreecontact-dev{a} libfreecontact0t64{a} libgfortran5{a} liblapack3{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 15.0 MB of archives. After unpacking 55.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.25 [25.0 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5 [43.6 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.1-2 [243 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41-5 [94.6 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 architecture-properties amd64 0.2.6 [2336 B] Get: 12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-8 [294 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.17-4 [862 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.1-2 [770 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-4 [539 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-1 [698 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.1-2 [1680 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.24.2 [919 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 libblas3 amd64 3.12.1-2 [160 kB] Get: 32 http://deb.debian.org/debian unstable/main amd64 libextutils-xspp-perl all 0.1800-3 [146 kB] Get: 33 http://deb.debian.org/debian unstable/main amd64 libgfortran5 amd64 14.2.0-19 [836 kB] Get: 34 http://deb.debian.org/debian unstable/main amd64 liblapack3 amd64 3.12.1-2 [2452 kB] Get: 35 http://deb.debian.org/debian unstable/main amd64 libfreecontact0t64 amd64 1.0.21-15 [82.8 kB] Get: 36 http://deb.debian.org/debian unstable/main amd64 libfreecontact-dev amd64 1.0.21-15 [91.4 kB] Fetched 15.0 MB in 0s (31.5 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19850 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.25_all.deb ... Unpacking sensible-utils (0.0.25) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2_amd64.deb ... Unpacking gettext-base (0.23.1-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-5_amd64.deb ... Unpacking bsdextrautils (2.41-5) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package architecture-properties:amd64. Preparing to unpack .../10-architecture-properties_0.2.6_amd64.deb ... Unpacking architecture-properties:amd64 (0.2.6) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-8_amd64.deb ... Unpacking m4 (1.4.19-8) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../22-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../24-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-2_amd64.deb ... Unpacking gettext (0.23.1-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libblas3:amd64. Preparing to unpack .../30-libblas3_3.12.1-2_amd64.deb ... Unpacking libblas3:amd64 (3.12.1-2) ... Selecting previously unselected package libextutils-xspp-perl. Preparing to unpack .../31-libextutils-xspp-perl_0.1800-3_all.deb ... Unpacking libextutils-xspp-perl (0.1800-3) ... Selecting previously unselected package libgfortran5:amd64. Preparing to unpack .../32-libgfortran5_14.2.0-19_amd64.deb ... Unpacking libgfortran5:amd64 (14.2.0-19) ... Selecting previously unselected package liblapack3:amd64. Preparing to unpack .../33-liblapack3_3.12.1-2_amd64.deb ... Unpacking liblapack3:amd64 (3.12.1-2) ... Selecting previously unselected package libfreecontact0t64:amd64. Preparing to unpack .../34-libfreecontact0t64_1.0.21-15_amd64.deb ... Unpacking libfreecontact0t64:amd64 (1.0.21-15) ... Selecting previously unselected package libfreecontact-dev:amd64. Preparing to unpack .../35-libfreecontact-dev_1.0.21-15_amd64.deb ... Unpacking libfreecontact-dev:amd64 (1.0.21-15) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41-5) ... Setting up libextutils-xspp-perl (0.1800-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up architecture-properties:amd64 (0.2.6) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2) ... Setting up m4 (1.4.19-8) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libblas3:amd64 (3.12.1-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/blas/libblas.so.3 to provide /usr/lib/x86_64-linux-gnu/libblas.so.3 (libblas.so.3-x86_64-linux-gnu) in auto mode Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up libgfortran5:amd64 (14.2.0-19) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.25) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up liblapack3:amd64 (3.12.1-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3 to provide /usr/lib/x86_64-linux-gnu/liblapack.so.3 (liblapack.so.3-x86_64-linux-gnu) in auto mode Setting up gettext (0.23.1-2) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up libfreecontact0t64:amd64 (1.0.21-15) ... Setting up groff-base (1.23.0-9) ... Setting up libfreecontact-dev:amd64 (1.0.21-15) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-8) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/448237/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/448237/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libfreecontact-perl-0.08/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libfreecontact-perl_0.08-10_source.changes dpkg-buildpackage: info: source package libfreecontact-perl dpkg-buildpackage: info: source version 0.08-10 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' rm -f Makefile.old dh_auto_clean make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_configure -- OPTIMIZE="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection" LD="'x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now" /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" "OPTIMIZE=-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection" "LD='x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for FreeContact Writing MYMETA.yml and MYMETA.json make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_build make -j40 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' Running Mkbootstrap for FreeContact () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -C++ -hiertype -noprototypes -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/perlobject.map' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' FreeContact.xs > FreeContact.xsc chmod 644 "FreeContact.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 cp lib/FreeContact.pm blib/lib/FreeContact.pm AutoSplitting blib/lib/FreeContact.pm (blib/lib/auto/FreeContact) mv FreeContact.xsc FreeContact.c g++ -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libfreecontact-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -DVERSION=\"0.08\" -DXS_VERSION=\"0.08\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" FreeContact.c cc1plus: warning: '-Werror=' argument '-Werror=implicit-function-declaration' is not valid for C++ rm -f blib/arch/auto/FreeContact/FreeContact.so 'x86_64-linux-gnu-gcc' -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong FreeContact.o -o blib/arch/auto/FreeContact/FreeContact.so \ -lfreecontact \ chmod 755 blib/arch/auto/FreeContact/FreeContact.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_test make -j40 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01FreeContact.t .. 1..3 ok 1 - use FreeContact; ok 2 - FreeContact->can(...) ok 3 - FreeContact::Predictor->can(...) ok will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 seq weight loop for 1000 seqs took 0.003253 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.035281 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) LU factorization took 3.09035 secs, inverted matrix (incl LUf) in 10.6642 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 all done in 10.8335 secs will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 561.595172234625 seq weight loop for 1000 seqs took 0.003247 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.033613 secs collected apc_mean[MI] = 0.165528914074767 aa freq sum (cell) = 0.999993945475299, pairfreq sum (cell) = 0.999988196197513 formed covariance matrix (126/126,4) cov matrix Cholesky... not positive definite, dmean dev: 0.0457782 cov matrix Cholesky... not positive definite, dmean dev: 0.0412004 cov matrix Cholesky... not positive definite, dmean dev: 0.0370804 cov matrix Cholesky... not positive definite, dmean dev: 0.0333723 cov matrix Cholesky... not positive definite, dmean dev: 0.0300351 cov matrix Cholesky... not positive definite, dmean dev: 0.0270316 cov matrix Cholesky... not positive definite, dmean dev: 0.0243284 cov matrix Cholesky... not positive definite, dmean dev: 0.0218956 cov matrix Cholesky... not positive definite, dmean dev: 0.019706 cov matrix Cholesky... not positive definite, dmean dev: 0.0177354 cov matrix Cholesky... not positive definite, dmean dev: 0.0159619 cov matrix Cholesky... not positive definite, dmean dev: 0.0143657 cov matrix Cholesky... not positive definite, dmean dev: 0.0129291 cov matrix Cholesky... shrank covariance matrix in 4.12165 secs will try rho 0.00178064, exact solution  iteration = 1 iteration = 2 iteration = 3 iteration = 4 iteration = 5 iteration = 6will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 will use 1 OMP threads calculated column aa frequencies, gap cols = 4 calculated pair frequency table in 0.037544 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) LU factorization took 3.08832 secs, inverted matrix (incl LUf) in 9.32799 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 t/02test.t ......... 1..10 ok 1 - use FreeContact; ok 2 - An object of class 'FreeContact::Predictor' isa 'FreeContact::Predictor' ok 3 ok 4 ok 5 - precision test ok 6 - timing results test ok 7 ok 8 ok 9 - wtot test ok 10 - wtot precision test ok All tests successful. Files=2, Tests=13, 26 wallclock secs ( 0.03 usr 0.00 sys + 26.62 cusr 0.11 csys = 26.76 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libfreecontact-perl/ make -j40 install DESTDIR=/build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/FreeContact/FreeContact.so Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/FreeContact.pm Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/FreeContact/autosplit.ix Installing /build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl/usr/share/man/man3/FreeContact.3pm make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_gencontrol -- '-VDescription=FreeContact is a protein residue contact predictor optimized for speed.${Newline}Its input is a multiple sequence alignment. FreeContact can function as an${Newline}accelerated drop-in for the published contact predictors${Newline}EVfold-mfDCA of DS. Marks (2011) and${Newline}PSICOV of D. Jones (2011).${Newline}${Newline}FreeContact is accelerated by a combination of vector instructions, multiple${Newline}threads, and faster implementation of key parts.${Newline}Depending on the alignment, 8-fold or higher speedups are possible.${Newline}${Newline}A sufficiently large alignment is required for meaningful results.${Newline}As a minimum, an alignment with an effective (after-weighting) sequence count${Newline}bigger than the length of the query sequence should be used. Alignments with${Newline}tens of thousands of (effective) sequences are considered good input.${Newline}${Newline}jackhmmer(1) from the hmmer package, or hhblits(1) from hhsuite${Newline}can be used to generate the alignments, for example.' make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_md5sums dh_builddeb dpkg-deb: building package 'libfreecontact-perl' in '../libfreecontact-perl_0.08-10_amd64.deb'. dpkg-deb: building package 'libfreecontact-perl-dbgsym' in '../libfreecontact-perl-dbgsym_0.08-10_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libfreecontact-perl_0.08-10_amd64.buildinfo dpkg-genchanges --build=binary -O../libfreecontact-perl_0.08-10_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/448237/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/448237/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/448237 and its subdirectories I: Current time: Sat Jun 7 00:53:44 +14 2025 I: pbuilder-time-stamp: 1749207224 + false + set +x Fri Jun 6 10:53:44 UTC 2025 I: Signing ./b2/libfreecontact-perl_0.08-10_amd64.buildinfo as libfreecontact-perl_0.08-10_amd64.buildinfo.asc Fri Jun 6 10:53:44 UTC 2025 I: Signed ./b2/libfreecontact-perl_0.08-10_amd64.buildinfo as ./b2/libfreecontact-perl_0.08-10_amd64.buildinfo.asc Fri Jun 6 10:53:44 UTC 2025 - build #2 for libfreecontact-perl/unstable/amd64 on ionos1-amd64 done. Starting cleanup. All cleanup done. Fri Jun 6 10:53:44 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-G2MHjJZE, removing. /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r: total 48 drwxr-xr-x 2 jenkins jenkins 4096 Jun 6 10:52 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jun 6 10:53 b2 -rw-r--r-- 1 jenkins jenkins 2208 May 19 11:37 libfreecontact-perl_0.08-10.dsc -rw------- 1 jenkins jenkins 34168 Jun 6 10:52 rbuildlog.iteWWgR /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1: total 304 -rw-r--r-- 1 jenkins jenkins 30485 Jun 6 10:52 build.log -rw-r--r-- 1 jenkins jenkins 167576 Jun 6 10:52 libfreecontact-perl-dbgsym_0.08-10_amd64.deb -rw-r--r-- 1 jenkins jenkins 4204 Jun 6 10:52 libfreecontact-perl_0.08-10.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2208 Jun 6 10:52 libfreecontact-perl_0.08-10.dsc -rw-r--r-- 1 jenkins jenkins 5206 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6088 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1478 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.changes -rw-r--r-- 1 jenkins jenkins 63432 Jun 6 10:52 libfreecontact-perl_0.08-10_amd64.deb -rw-r--r-- 1 jenkins jenkins 1301 Jun 6 10:52 libfreecontact-perl_0.08-10_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2: total 296 -rw-r--r-- 1 jenkins jenkins 32466 Jun 6 10:53 build.log -rw-r--r-- 1 jenkins jenkins 167576 Jun 6 10:53 libfreecontact-perl-dbgsym_0.08-10_amd64.deb -rw-r--r-- 1 jenkins jenkins 4204 Jun 6 10:53 libfreecontact-perl_0.08-10.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2208 Jun 6 10:53 libfreecontact-perl_0.08-10.dsc -rw-r--r-- 1 jenkins jenkins 5195 Jun 6 10:53 libfreecontact-perl_0.08-10_amd64.buildinfo -rw-r--r-- 1 jenkins jenkins 6077 Jun 6 10:53 libfreecontact-perl_0.08-10_amd64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1478 Jun 6 10:53 libfreecontact-perl_0.08-10_amd64.changes -rw-r--r-- 1 jenkins jenkins 63432 Jun 6 10:53 libfreecontact-perl_0.08-10_amd64.deb -rw-r--r-- 1 jenkins jenkins 1301 Jun 6 10:53 libfreecontact-perl_0.08-10_source.changes Fri Jun 6 10:53:45 UTC 2025 I: Deleting $TMPDIR on ionos1-amd64.debian.net. Fri Jun 6 10:53:45 UTC 2025 I: libfreecontact-perl_0.08-10_amd64.changes: Format: 1.8 Date: Mon, 19 May 2025 12:17:56 +0200 Source: libfreecontact-perl Binary: libfreecontact-perl libfreecontact-perl-dbgsym Architecture: amd64 Version: 0.08-10 Distribution: unstable Urgency: medium Maintainer: Debian Med Packaging Team Changed-By: Andreas Tille Description: libfreecontact-perl - fast protein contact predictor - binding for Perl Changes: libfreecontact-perl (0.08-10) unstable; urgency=medium . * Build on 64 bit architectures only Checksums-Sha1: 53ca0dbc7e8a9195e325da1b6d2c85375c09d2ca 167576 libfreecontact-perl-dbgsym_0.08-10_amd64.deb a3dfdc3aa66aa254e5e9a862651f8bd5565998b8 5206 libfreecontact-perl_0.08-10_amd64.buildinfo cb3cec180212278d8d90ee1c9ff226fefcf05eb3 63432 libfreecontact-perl_0.08-10_amd64.deb Checksums-Sha256: 7248ccaa360ee14204b81adfb4636632ec523b25b9e6f307c13c6bf0190cf269 167576 libfreecontact-perl-dbgsym_0.08-10_amd64.deb 374cf1a01aedecccbd675642ef29f8daa0d78f485d01251cc4019b2e8874a9ee 5206 libfreecontact-perl_0.08-10_amd64.buildinfo ba5cf02b15b5a5c182ffd6c0cec84316fa5b58aee45c6ed8662431b5550cf6fc 63432 libfreecontact-perl_0.08-10_amd64.deb Files: f30d1f41e45a4c502b510ab9c3b02bd4 167576 debug optional libfreecontact-perl-dbgsym_0.08-10_amd64.deb 4d861a3bd6fa7ec14b3b1af9c1e87a7a 5206 perl optional libfreecontact-perl_0.08-10_amd64.buildinfo 62c3aab3ec0d06d1164f21aa891df5fe 63432 perl optional libfreecontact-perl_0.08-10_amd64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libfreecontact-perl_0.08-10.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libfreecontact-perl_0.08-10.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/libfreecontact-perl_0.08-10.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/libfreecontact-perl_0.08-10.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/amd64/libfreecontact-perl_0.08-10_amd64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libfreecontact-perl_0.08-10.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-06-06 10:52:07.104824356 +0000 +++ b2/build.log 2025-06-06 10:53:45.069470561 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Jul 9 05:12:58 -12 2026 -I: pbuilder-time-stamp: 1783617178 +I: Current time: Sat Jun 7 00:52:08 +14 2025 +I: pbuilder-time-stamp: 1749207128 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -25,52 +25,84 @@ dpkg-source: info: applying missing-use-carp.patch I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/1716237/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D01_modify_environment starting +debug: Running on ionos1-amd64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Jun 6 10:52 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='amd64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=42 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='amd64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=amd64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=40 ' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=x86_64 + HOST_ARCH=amd64 IFS=' ' - INVOCATION_ID='2574a7d117704f7ebb0110f20c8f0e8d' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='1716237' - PS1='# ' - PS2='> ' + INVOCATION_ID=e3605e5deb8844149ced80b5d65740df + LANG=C + LANGUAGE=et_EE:et + LC_ALL=C + MACHTYPE=x86_64-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=448237 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_q7GZ --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1 --logfile b1/build.log libfreecontact-perl_0.08-10.dsc' - SUDO_GID='111' - SUDO_UID='106' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/pbuilderrc_ooZb --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2 --logfile b2/build.log libfreecontact-perl_0.08-10.dsc' + SUDO_GID=110 + SUDO_UID=105 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos15-amd64 6.12.22+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.22-1~bpo12+1 (2025-04-25) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-37-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.140-1 (2025-05-22) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 May 12 2025 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/1716237/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 May 12 19:25 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -150,7 +182,7 @@ Get: 34 http://deb.debian.org/debian unstable/main amd64 liblapack3 amd64 3.12.1-2 [2452 kB] Get: 35 http://deb.debian.org/debian unstable/main amd64 libfreecontact0t64 amd64 1.0.21-15 [82.8 kB] Get: 36 http://deb.debian.org/debian unstable/main amd64 libfreecontact-dev amd64 1.0.21-15 [91.4 kB] -Fetched 15.0 MB in 0s (44.1 MB/s) +Fetched 15.0 MB in 0s (31.5 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19850 files and directories currently installed.) @@ -311,7 +343,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libfreecontact-perl-0.08/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libfreecontact-perl_0.08-10_source.changes +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libfreecontact-perl-0.08/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libfreecontact-perl_0.08-10_source.changes dpkg-buildpackage: info: source package libfreecontact-perl dpkg-buildpackage: info: source version 0.08-10 dpkg-buildpackage: info: source distribution unstable @@ -341,7 +377,7 @@ Writing MYMETA.yml and MYMETA.json make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_build - make -j42 + make -j40 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' Running Mkbootstrap for FreeContact () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -C++ -hiertype -noprototypes -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/perlobject.map' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' -typemap '/build/reproducible-path/libfreecontact-perl-0.08/typemap' FreeContact.xs > FreeContact.xsc @@ -360,7 +396,7 @@ Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_auto_test - make -j42 test TEST_VERBOSE=1 + make -j40 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t @@ -374,27 +410,27 @@ SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 -seq weight loop for 1000 seqs took 0.005525 secs +seq weight loop for 1000 seqs took 0.003253 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 -calculated pair frequency table in 0.092977 secs +calculated pair frequency table in 0.035281 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) -LU factorization took 7.00033 secs, inverted matrix (incl LUf) in 20.7478 secs +LU factorization took 3.09035 secs, inverted matrix (incl LUf) in 10.6642 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 collected apc_mean[fro] = 3.35437751555787 -all done in 21.0927 secs +all done in 10.8335 secs will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 561.595172234625 -seq weight loop for 1000 seqs took 0.005622 secs +seq weight loop for 1000 seqs took 0.003247 secs will use 1 OMP threads calculated column aa frequencies, gap cols = 4 -calculated pair frequency table in 0.091275 secs +calculated pair frequency table in 0.033613 secs collected apc_mean[MI] = 0.165528914074767 aa freq sum (cell) = 0.999993945475299, pairfreq sum (cell) = 0.999988196197513 formed covariance matrix (126/126,4) @@ -412,18 +448,18 @@ cov matrix Cholesky... not positive definite, dmean dev: 0.0143657 cov matrix Cholesky... not positive definite, dmean dev: 0.0129291 cov matrix Cholesky... -shrank covariance matrix in 12.0459 secs +shrank covariance matrix in 4.12165 secs will try rho 0.00178064, exact solution - iteration = 1 iteration = 2 iteration = 3will use 1 OMP threads + iteration = 1 iteration = 2 iteration = 3 iteration = 4 iteration = 5 iteration = 6will use 1 OMP threads SSE2 veczweight, wchunk = 64 total weight (variation) of alignment = 620.777515304633 will use 1 OMP threads calculated column aa frequencies, gap cols = 4 -calculated pair frequency table in 0.09866 secs +calculated pair frequency table in 0.037544 secs collected apc_mean[MI] = 0.174031486973761 aa freq sum (cell) = 0.999997158936352, pairfreq sum (cell) = 0.999994420985606 formed covariance matrix (122/126,4) -LU factorization took 5.93026 secs, inverted matrix (incl LUf) in 17.5679 secs +LU factorization took 3.08832 secs, inverted matrix (incl LUf) in 9.32799 secs density of inverse covariance matrix = 1 (cksum 346842.2) went back to gapped (126) wwi matrix collected apc_mean[l1norm] = 117.987054769839 @@ -442,13 +478,13 @@ ok 10 - wtot precision test ok All tests successful. -Files=2, Tests=13, 54 wallclock secs ( 0.04 usr 0.01 sys + 44.16 cusr 0.23 csys = 44.44 CPU) +Files=2, Tests=13, 26 wallclock secs ( 0.03 usr 0.00 sys + 26.62 cusr 0.11 csys = 26.76 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libfreecontact-perl/ - make -j42 install DESTDIR=/build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j40 install DESTDIR=/build/reproducible-path/libfreecontact-perl-0.08/debian/libfreecontact-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libfreecontact-perl-0.08' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FreeContact.bs blib/arch/auto/FreeContact/FreeContact.bs 644 Manifying 1 pod document @@ -479,8 +515,8 @@ make[1]: Leaving directory '/build/reproducible-path/libfreecontact-perl-0.08' dh_md5sums dh_builddeb -dpkg-deb: building package 'libfreecontact-perl-dbgsym' in '../libfreecontact-perl-dbgsym_0.08-10_amd64.deb'. dpkg-deb: building package 'libfreecontact-perl' in '../libfreecontact-perl_0.08-10_amd64.deb'. +dpkg-deb: building package 'libfreecontact-perl-dbgsym' in '../libfreecontact-perl-dbgsym_0.08-10_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libfreecontact-perl_0.08-10_amd64.buildinfo dpkg-genchanges --build=binary -O../libfreecontact-perl_0.08-10_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -488,12 +524,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/448237/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/1716237 and its subdirectories -I: Current time: Thu Jul 9 05:15:06 -12 2026 -I: pbuilder-time-stamp: 1783617306 +I: removing directory /srv/workspace/pbuilder/448237 and its subdirectories +I: Current time: Sat Jun 7 00:53:44 +14 2025 +I: pbuilder-time-stamp: 1749207224 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libfreecontact-perl_0.08-10.diff: 69.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libfreecontact-perl_0.08-10.diff.gz b2/build.log: 75.2% -- replaced with stdout Compressing the 1st log... b1/build.log: 75.7% -- replaced with stdout Fri Jun 6 10:53:46 UTC 2025 I: diffoscope 297 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libfreecontact-perl_unstable_amd64_1749207226 + touch /var/log/reproducible-builds/diffoscope_stamp_libfreecontact-perl_unstable_amd64_1749207226 + RESULT=0 + systemd-run '--description=diffoscope on libfreecontact-perl/0.08-10 in unstable/amd64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-amd64_4-55720 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r --run-session -c jenkins-reproducible-unstable-diffoscope-0bfcc3b8-5fae-433b-a1bb-0a4f15d2a7fe -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/dbd-tmp-H7wEQIq ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/libfreecontact-perl_0.08-10.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/libfreecontact-perl_0.08-10.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/libfreecontact-perl_0.08-10.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1/libfreecontact-perl_0.08-10_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2/libfreecontact-perl_0.08-10_amd64.changes' + false + set +x Running as unit: rb-diffoscope-amd64_4-55720.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/libfreecontact-perl_0.08-10.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/libfreecontact-perl_0.08-10.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/libfreecontact-perl_0.08-10.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b1/libfreecontact-perl_0.08-10_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.hcK1Fh9r/b2/libfreecontact-perl_0.08-10_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 158ms CPU time consumed: 160ms _ _ _ __ _ _ | (_) |__ / _|_ __ ___ ___ ___ ___ _ __ | |_ __ _ ___| |_ _ __ ___ | | | '_ \| |_| '__/ _ \/ _ \/ __/ _ \| '_ \| __/ _` |/ __| __|____| '_ \ / _ \ | | | |_) | _| | | __/ __/ (_| (_) | | | | || (_| | (__| ||_____| |_) | __/ |_|_|_.__/|_| |_| \___|\___|\___\___/|_| |_|\__\__,_|\___|\__| | .__/ \___| |_| _ _ __| | | '__| | | | | | |_| |_| Fri Jun 6 10:53:46 UTC 2025 I: diffoscope 297 found no differences in the changes files, and a .buildinfo file also exists. Fri Jun 6 10:53:46 UTC 2025 I: libfreecontact-perl from unstable built successfully and reproducibly on amd64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-06-06 10:53:46] INFO: Starting at 2025-06-06 10:53:46.920398 [2025-06-06 10:53:46] INFO: Generating the pages of 1 package(s) [2025-06-06 10:53:47] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/amd64/libfreecontact-perl didn't produce a buildlog, even though it has been built. [2025-06-06 10:53:47] INFO: Finished at 2025-06-06 10:53:47.153023, took: 0:00:00.232628 Fri Jun 6 10:53:47 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/amd64/libfreecontact-perl.html Fri Jun 6 10:53:47 UTC 2025 I: Removing signed libfreecontact-perl_0.08-10_amd64.buildinfo.asc files: removed './b1/libfreecontact-perl_0.08-10_amd64.buildinfo.asc' removed './b2/libfreecontact-perl_0.08-10_amd64.buildinfo.asc' 1749207227 amd64 unstable libfreecontact-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libfreecontact-perl_0.08-10.rbuild.log: 73.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libfreecontact-perl_0.08-10.rbuild.log.gz [2025-06-06 10:53:47] INFO: Starting at 2025-06-06 10:53:47.404106 [2025-06-06 10:53:47] INFO: Generating the pages of 1 package(s) [2025-06-06 10:53:47] INFO: Finished at 2025-06-06 10:53:47.630859, took: 0:00:00.226759 All cleanup done. Fri Jun 6 10:53:47 UTC 2025 - total duration: 0h 3m 59s. Fri Jun 6 10:53:47 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-4q5mcCaN, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 4min 664ms CPU time consumed: 4.398s