Running as unit: rb-build-arm64_1-70180.service ==================================================================================== Wed Apr 23 21:18:37 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_1) on jenkins, called using "codethink03-arm64 codethink04-arm64" as arguments. Wed Apr 23 21:18:37 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-WjurOXGC" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Apr 23 21:18:37 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Wed Apr 23 21:18:37 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-WJ69QB' Wed Apr 23 21:18:38 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Wed Apr 23 21:18:38 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-2ivt1h' ok, let's check if libbsd-resource-perl is building anywhere yet… ok, libbsd-resource-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libbsd-resource-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink03-arm64.debian.net. 2nd build will be done on codethink04-arm64.debian.net. ============================================================================= Wed Apr 23 21:18:58 UTC 2025 I: starting to build libbsd-resource-perl/trixie/arm64 on jenkins on '2025-04-23 21:18' Wed Apr 23 21:18:58 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_1/70180/console.log 1745443138 arm64 trixie libbsd-resource-perl Wed Apr 23 21:18:58 UTC 2025 I: Downloading source for trixie/libbsd-resource-perl=1.2911-2 --2025-04-23 21:18:58-- http://deb.debian.org/debian/pool/main/libb/libbsd-resource-perl/libbsd-resource-perl_1.2911-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2297 (2.2K) [text/prs.lines.tag] Saving to: ‘libbsd-resource-perl_1.2911-2.dsc’ 0K .. 100% 243M=0s 2025-04-23 21:18:58 (243 MB/s) - ‘libbsd-resource-perl_1.2911-2.dsc’ saved [2297/2297] --2025-04-23 21:18:58-- http://deb.debian.org/debian/pool/main/libb/libbsd-resource-perl/libbsd-resource-perl_1.2911-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2297 (2.2K) [text/prs.lines.tag] Saving to: ‘libbsd-resource-perl_1.2911-2.dsc’ 0K .. 100% 243M=0s 2025-04-23 21:18:58 (243 MB/s) - ‘libbsd-resource-perl_1.2911-2.dsc’ saved [2297/2297] Wed Apr 23 21:18:58 UTC 2025 I: libbsd-resource-perl_1.2911-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libbsd-resource-perl Binary: libbsd-resource-perl Architecture: any Version: 1.2911-2 Maintainer: Debian Perl Group Uploaders: Ansgar Burchardt , gregor herrmann , Damyan Ivanov , Salvatore Bonaccorso Homepage: https://metacpan.org/release/BSD-Resource Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), libtest-pod-perl, libtest-pod-coverage-perl Package-List: libbsd-resource-perl deb perl optional arch=any Checksums-Sha1: 0376e1d005e1b9b0a88f22c1845de51944c58451 68183 libbsd-resource-perl_1.2911.orig.tar.gz 5317fd8509ad811559f97e533e11efbf8e2aad79 7200 libbsd-resource-perl_1.2911-2.debian.tar.xz Checksums-Sha256: 9d1cfba063cc18f72427a22451f7908836b7331ac8785dbe07553c5b043a0c3d 68183 libbsd-resource-perl_1.2911.orig.tar.gz 9b750ff2b534c338e6cf203ec94c6027305974ec9d07f46d4ed447456eb156dc 7200 libbsd-resource-perl_1.2911-2.debian.tar.xz Files: 3a67959a30fd6e537b9d8a64d60d8692 68183 libbsd-resource-perl_1.2911.orig.tar.gz 02486b24e8bbd4cc1857e27e4f757eb0 7200 libbsd-resource-perl_1.2911-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmK+I4EACgkQV5wWDUye I+hDcxAAt+j4T0f9txWDTsO3v4apWTXlV9tu9Q6ascztBHSL0D9KUFmytj4yeoOz FvmEoWLTXTASQMw1r+hZz5xhqebL91zgd0jOuzUitAYKpMTGEjUjxgBaCz61AKo8 aowLEZWyHzwuzGJdlxHcOlSI9xJBG+TY2DgWMGMM44kiZCQBbsqcEct8s93lXTZG e5b9R4MjF0UjvGfjxKlgl5hqY8YRHFJY7CnVfB7xDRipMu/JCfWlhWpNmVix9typ 4UJu3icByUGVWGAFlSpQ5fPHW+LXLR+4CYY8cLzFf79ae/Jkz1mP8nlPYgMRe0Yt XjJT/yY5p3aLhy3bYPdTdTykj/4Ska6ZCQvKdPchIIk75N/21jZMiX27MF9mBrT+ dTjZTyaHSurmdBAuPzthTyNfXMIKpmQcIVG8VCphmCtgOcydnRILQb4ATxwNH18E Fb7ef7wWE7+kKQ2wkARjuYs3soeVX6e4Dq/sF0SzQOeyfeIaHATDITBcusG1pGYW G8xuRDOTLxJLb5JlrHSbjjFnpTSjk3t8bluDDPgCN5Aj9YqyxfPWiOrErduTr4+K Hl47DWEcZC57tVrP5opFMYjrTBIyDTG9eZG9TyrzVZ+EGY+/roJPkQbUaSs9UWgo A4EUMaCMfiualRKsz2IOokTRnLK17fRQ53juvDQH+BVdrzslq38= =2BNw -----END PGP SIGNATURE----- Wed Apr 23 21:18:58 UTC 2025 I: Checking whether the package is not for us Wed Apr 23 21:18:58 UTC 2025 I: Starting 1st build on remote node codethink03-arm64.debian.net. Wed Apr 23 21:18:58 UTC 2025 I: Preparing to do remote build '1' on codethink03-arm64.debian.net. Wed Apr 23 21:18:58 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Wed Apr 23 21:18:58 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-9zHDBS' ==================================================================================== Wed May 27 03:42:00 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "1 libbsd-resource-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t 1.2911-2" as arguments. Wed May 27 03:42:00 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-q9DBrvaf" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed May 27 03:42:00 UTC 2026 I: Downloading source for trixie/libbsd-resource-perl=1.2911-2 Reading package lists... NOTICE: 'libbsd-resource-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 77.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (dsc) [2297 B] Get:2 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (tar) [68.2 kB] Get:3 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (diff) [7200 B] Fetched 77.7 kB in 0s (1026 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libbsd-resource-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 77.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (dsc) [2297 B] Get:2 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (tar) [68.2 kB] Get:3 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (diff) [7200 B] Fetched 77.7 kB in 0s (1026 kB/s) Download complete and in download only mode ============================================================================= Building libbsd-resource-perl in trixie on arm64 on codethink03-arm64 now. Date: Wed May 27 04:42:01 BST 2026 Date UTC: Wed May 27 03:42:01 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue May 26 15:42:01 -12 2026 I: pbuilder-time-stamp: 1779853321 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libbsd-resource-perl_1.2911-2.dsc] I: copying [./libbsd-resource-perl_1.2911.orig.tar.gz] I: copying [./libbsd-resource-perl_1.2911-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libbsd-resource-perl_1.2911-2.dsc: unsupported subcommand dpkg-source: info: extracting libbsd-resource-perl in libbsd-resource-perl-1.2911 dpkg-source: info: unpacking libbsd-resource-perl_1.2911.orig.tar.gz dpkg-source: info: unpacking libbsd-resource-perl_1.2911-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1101181/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='3247fe2f15be4d53854e923d1d30aed8' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1101181' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_TBqR --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1 --logfile b1/build.log libbsd-resource-perl_1.2911-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1101181/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), libtest-pod-perl, libtest-pod-coverage-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 12.1 MB of archives. After unpacking 50.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.40.1-3 [1019 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 12.1 MB in 0s (98.4 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../30-libperl-dev_5.40.1-3_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-3) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../31-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../32-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../33-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../34-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:arm64 (5.40.1-3) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libbsd-resource-perl-1.2911/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libbsd-resource-perl_1.2911-2_source.changes dpkg-buildpackage: info: source package libbsd-resource-perl dpkg-buildpackage: info: source version 1.2911-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Configuring BSD::Resource... Checking whether you have certain header files... You do have . Excellent. Checking to see whether you have rlim_t... You seem to have rlim_t defined (which is nice). Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for BSD::Resource Writing MYMETA.yml and MYMETA.json Done configuring BSD::Resource. Now you may issue 'make'. Do not forget also 'make test'. If some tests fail, please rerun the tests (see INSTALL). dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' Running Mkbootstrap for Resource () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Resource.xs > Resource.xsc cp Resource.pm blib/lib/BSD/Resource.pm AutoSplitting blib/lib/BSD/Resource.pm (blib/lib/auto/BSD/Resource) chmod 644 "Resource.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 mv Resource.xsc Resource.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.2911\" -DXS_VERSION=\"1.2911\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DRlim_t=rlim_t Resource.c rm -f blib/arch/auto/BSD/Resource/Resource.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong Resource.o -o blib/arch/auto/BSD/Resource/Resource.so \ \ chmod 755 blib/arch/auto/BSD/Resource/Resource.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' dh_auto_test -- TEST_FILES="t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t" make -j12 test TEST_VERBOSE=1 "TEST_FILES=t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t" make[2]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t t/get_rlimits.t ... 1..19 ok 1 # RLIMIT_AS 9 ok 2 # RLIMIT_CORE 4 ok 3 # RLIMIT_CPU 0 ok 4 # RLIMIT_DATA 2 ok 5 # RLIMIT_FSIZE 1 ok 6 # RLIMIT_LOCKS 10 ok 7 # RLIMIT_MEMLOCK 8 ok 8 # RLIMIT_MSGQUEUE 12 ok 9 # RLIMIT_NICE 13 ok 10 # RLIMIT_NOFILE 7 ok 11 # RLIMIT_NPROC 6 ok 12 # RLIMIT_OFILE 7 ok 13 # RLIMIT_OPEN_MAX 7 ok 14 # RLIMIT_RSS 5 ok 15 # RLIMIT_RTPRIO 14 ok 16 # RLIMIT_RTTIME 15 ok 17 # RLIMIT_SIGPENDING 11 ok 18 # RLIMIT_STACK 3 ok 19 # RLIMIT_VMEM 9 ok t/getpriority.t ... 1..3 # nowprio1 = 10 ok 1 # nowprio2 = 10 ok 2 # nowprio3 = 10 ok 3 ok t/getrlimit.t ..... 1..20 # k = RLIMIT_SIGPENDING RLIMIT_NPROC RLIMIT_NICE RLIMIT_RTPRIO RLIMIT_CORE RLIMIT_DATA RLIMIT_MSGQUEUE RLIMIT_RTTIME RLIMIT_STACK RLIMIT_CPU RLIMIT_NOFILE RLIMIT_FSIZE RLIMIT_OPEN_MAX RLIMIT_LOCKS RLIMIT_RSS RLIMIT_VMEM RLIMIT_OFILE RLIMIT_AS RLIMIT_MEMLOCK, v = 11 6 13 14 4 2 12 15 3 0 7 1 7 10 5 9 7 9 8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on BSD::Resource ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/BSD/Resource.pm ok t/setpriority.t ... 1..3 # nice = 0 # origprio = 10 () # gotlower = 1 () # lowerprio = 11 () ok 1 ok 2 # skipped (origprio = 10) ok 3 # skipped (euid = 1111) ok t/setrlimit.t ..... 1..19 # lim = RLIMIT_AS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 1 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_CORE # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # Rounding down to 4096 byte boundary # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_CORE, 0) = OK # getrlimit(RLIMIT_CORE) = 0 ok 2 # 0 <= 0 # lim = RLIMIT_CPU # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 3 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_DATA # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 4 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_FSIZE # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 5 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_LOCKS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 6 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_MEMLOCK # old_soft = 4200427520, old_hard = 4200427520 # try_soft = 3150320640, try_hard = 3150320640 # Rounding down to 4096 byte boundary # try_soft = 3150319616, try_hard = 3150319616 # setrlimit(RLIMIT_MEMLOCK, 3150319616) = OK # getrlimit(RLIMIT_MEMLOCK) = 3150319616 ok 7 # 3150319616 <= 3150319616 # lim = RLIMIT_MSGQUEUE # old_soft = 819200, old_hard = 819200 # try_soft = 614400, try_hard = 614400 # try_soft = 614400, try_hard = 614400 # setrlimit(RLIMIT_MSGQUEUE, 614400) = OK # getrlimit(RLIMIT_MSGQUEUE) = 614400 ok 8 # 614400 <= 614400 # lim = RLIMIT_NICE # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_NICE, 0) = OK # getrlimit(RLIMIT_NICE) = 0 ok 9 # 0 <= 0 # lim = RLIMIT_NOFILE # old_soft = 1024, old_hard = 1048576 # try_soft = 768, try_hard = 786432 # try_soft = 768, try_hard = 786432 # setrlimit(RLIMIT_NOFILE, 768) = OK # getrlimit(RLIMIT_NOFILE) = 768 ok 10 # 768 <= 768 # lim = RLIMIT_NPROC # old_soft = 127857, old_hard = 127857 # try_soft = 95892, try_hard = 95892 # try_soft = 95892, try_hard = 95892 # setrlimit(RLIMIT_NPROC, 95892) = OK # getrlimit(RLIMIT_NPROC) = 95892 ok 11 # 95892 <= 95892 # lim = RLIMIT_OFILE # old_soft = 768, old_hard = 786432 # try_soft = 576, try_hard = 589824 # try_soft = 576, try_hard = 589824 # setrlimit(RLIMIT_OFILE, 576) = OK # getrlimit(RLIMIT_OFILE) = 576 ok 12 # 576 <= 576 # lim = RLIMIT_OPEN_MAX # old_soft = 576, old_hard = 589824 # try_soft = 432, try_hard = 442368 # try_soft = 432, try_hard = 442368 # setrlimit(RLIMIT_OPEN_MAX, 432) = OK # getrlimit(RLIMIT_OPEN_MAX) = 432 ok 13 # 432 <= 432 # lim = RLIMIT_RSS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 14 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_RTPRIO # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_RTPRIO, 0) = OK # getrlimit(RLIMIT_RTPRIO) = 0 ok 15 # 0 <= 0 # lim = RLIMIT_RTTIME # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 16 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_SIGPENDING # old_soft = 127857, old_hard = 127857 # try_soft = 95892, try_hard = 95892 # try_soft = 95892, try_hard = 95892 # setrlimit(RLIMIT_SIGPENDING, 95892) = OK # getrlimit(RLIMIT_SIGPENDING) = 95892 ok 17 # 95892 <= 95892 # lim = RLIMIT_STACK # old_soft = 8388608, old_hard = -1 # try_soft = 6291456, try_hard = -1 ok 18 # SKIP hard_limit == RLIM_INFINITY # lim = RLIMIT_VMEM # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 19 # SKIP soft_limit == RLIM_INFINITY ok All tests successful. Files=7, Tests=66, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.21 cusr 0.02 csys = 0.27 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libbsd-resource-perl/ make -j12 install DESTDIR=/build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/Resource.so Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/autosplit.ix Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/times.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/setpriority.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/setrlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getpriority.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/get_prios.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/get_rlimits.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/hard.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/soft.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getrlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_find_prio.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_find_rlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nivcsw.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nvcsw.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nsignals.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/msgrcv.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/msgsnd.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/oublock.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/inblock.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nswap.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/majflt.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/minflt.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/isrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/idrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/ixrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/maxrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/stime.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/utime.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_g.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getrusage.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/BSD/Resource.pm Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/share/man/man3/BSD::Resource.3pm make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libbsd-resource-perl' in '../libbsd-resource-perl_1.2911-2_arm64.deb'. dpkg-deb: building package 'libbsd-resource-perl-dbgsym' in '../libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1101181 and its subdirectories I: Current time: Tue May 26 15:42:39 -12 2026 I: pbuilder-time-stamp: 1779853359 Wed May 27 03:42:39 UTC 2026 I: Signing ./b1/libbsd-resource-perl_1.2911-2_arm64.buildinfo as libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc Wed May 27 03:42:39 UTC 2026 I: Signed ./b1/libbsd-resource-perl_1.2911-2_arm64.buildinfo as ./b1/libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc Wed May 27 03:42:39 UTC 2026 - build #1 for libbsd-resource-perl/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Wed May 27 03:42:39 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-q9DBrvaf, removing. /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 23 21:19 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 23 21:18 b2 -rw-r--r-- 1 jenkins jenkins 2297 Jun 30 2022 libbsd-resource-perl_1.2911-2.dsc -rw------- 1 jenkins jenkins 3501 Apr 23 21:18 rbuildlog.sHXplgn /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1: total 140 -rw-r--r-- 1 jenkins jenkins 34735 Apr 23 21:19 build.log -rw-r--r-- 1 jenkins jenkins 36232 Apr 23 21:19 libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 7200 Apr 23 21:19 libbsd-resource-perl_1.2911-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2297 Apr 23 21:19 libbsd-resource-perl_1.2911-2.dsc -rw-r--r-- 1 jenkins jenkins 5160 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6042 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2030 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 31344 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1853 Apr 23 21:19 libbsd-resource-perl_1.2911-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2: total 0 Wed Apr 23 21:19:40 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue May 26 15:42:01 -12 2026 I: pbuilder-time-stamp: 1779853321 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libbsd-resource-perl_1.2911-2.dsc] I: copying [./libbsd-resource-perl_1.2911.orig.tar.gz] I: copying [./libbsd-resource-perl_1.2911-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libbsd-resource-perl_1.2911-2.dsc: unsupported subcommand dpkg-source: info: extracting libbsd-resource-perl in libbsd-resource-perl-1.2911 dpkg-source: info: unpacking libbsd-resource-perl_1.2911.orig.tar.gz dpkg-source: info: unpacking libbsd-resource-perl_1.2911-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1101181/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='3247fe2f15be4d53854e923d1d30aed8' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1101181' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_TBqR --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1 --logfile b1/build.log libbsd-resource-perl_1.2911-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1101181/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), libtest-pod-perl, libtest-pod-coverage-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 12.1 MB of archives. After unpacking 50.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.40.1-3 [1019 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 12.1 MB in 0s (98.4 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../30-libperl-dev_5.40.1-3_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-3) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../31-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../32-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../33-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../34-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:arm64 (5.40.1-3) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libbsd-resource-perl-1.2911/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libbsd-resource-perl_1.2911-2_source.changes dpkg-buildpackage: info: source package libbsd-resource-perl dpkg-buildpackage: info: source version 1.2911-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Configuring BSD::Resource... Checking whether you have certain header files... You do have . Excellent. Checking to see whether you have rlim_t... You seem to have rlim_t defined (which is nice). Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for BSD::Resource Writing MYMETA.yml and MYMETA.json Done configuring BSD::Resource. Now you may issue 'make'. Do not forget also 'make test'. If some tests fail, please rerun the tests (see INSTALL). dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' Running Mkbootstrap for Resource () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Resource.xs > Resource.xsc cp Resource.pm blib/lib/BSD/Resource.pm AutoSplitting blib/lib/BSD/Resource.pm (blib/lib/auto/BSD/Resource) chmod 644 "Resource.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 mv Resource.xsc Resource.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.2911\" -DXS_VERSION=\"1.2911\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DRlim_t=rlim_t Resource.c rm -f blib/arch/auto/BSD/Resource/Resource.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong Resource.o -o blib/arch/auto/BSD/Resource/Resource.so \ \ chmod 755 blib/arch/auto/BSD/Resource/Resource.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' dh_auto_test -- TEST_FILES="t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t" make -j12 test TEST_VERBOSE=1 "TEST_FILES=t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t" make[2]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t t/get_rlimits.t ... 1..19 ok 1 # RLIMIT_AS 9 ok 2 # RLIMIT_CORE 4 ok 3 # RLIMIT_CPU 0 ok 4 # RLIMIT_DATA 2 ok 5 # RLIMIT_FSIZE 1 ok 6 # RLIMIT_LOCKS 10 ok 7 # RLIMIT_MEMLOCK 8 ok 8 # RLIMIT_MSGQUEUE 12 ok 9 # RLIMIT_NICE 13 ok 10 # RLIMIT_NOFILE 7 ok 11 # RLIMIT_NPROC 6 ok 12 # RLIMIT_OFILE 7 ok 13 # RLIMIT_OPEN_MAX 7 ok 14 # RLIMIT_RSS 5 ok 15 # RLIMIT_RTPRIO 14 ok 16 # RLIMIT_RTTIME 15 ok 17 # RLIMIT_SIGPENDING 11 ok 18 # RLIMIT_STACK 3 ok 19 # RLIMIT_VMEM 9 ok t/getpriority.t ... 1..3 # nowprio1 = 10 ok 1 # nowprio2 = 10 ok 2 # nowprio3 = 10 ok 3 ok t/getrlimit.t ..... 1..20 # k = RLIMIT_SIGPENDING RLIMIT_NPROC RLIMIT_NICE RLIMIT_RTPRIO RLIMIT_CORE RLIMIT_DATA RLIMIT_MSGQUEUE RLIMIT_RTTIME RLIMIT_STACK RLIMIT_CPU RLIMIT_NOFILE RLIMIT_FSIZE RLIMIT_OPEN_MAX RLIMIT_LOCKS RLIMIT_RSS RLIMIT_VMEM RLIMIT_OFILE RLIMIT_AS RLIMIT_MEMLOCK, v = 11 6 13 14 4 2 12 15 3 0 7 1 7 10 5 9 7 9 8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on BSD::Resource ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/BSD/Resource.pm ok t/setpriority.t ... 1..3 # nice = 0 # origprio = 10 () # gotlower = 1 () # lowerprio = 11 () ok 1 ok 2 # skipped (origprio = 10) ok 3 # skipped (euid = 1111) ok t/setrlimit.t ..... 1..19 # lim = RLIMIT_AS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 1 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_CORE # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # Rounding down to 4096 byte boundary # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_CORE, 0) = OK # getrlimit(RLIMIT_CORE) = 0 ok 2 # 0 <= 0 # lim = RLIMIT_CPU # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 3 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_DATA # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 4 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_FSIZE # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 5 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_LOCKS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 6 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_MEMLOCK # old_soft = 4200427520, old_hard = 4200427520 # try_soft = 3150320640, try_hard = 3150320640 # Rounding down to 4096 byte boundary # try_soft = 3150319616, try_hard = 3150319616 # setrlimit(RLIMIT_MEMLOCK, 3150319616) = OK # getrlimit(RLIMIT_MEMLOCK) = 3150319616 ok 7 # 3150319616 <= 3150319616 # lim = RLIMIT_MSGQUEUE # old_soft = 819200, old_hard = 819200 # try_soft = 614400, try_hard = 614400 # try_soft = 614400, try_hard = 614400 # setrlimit(RLIMIT_MSGQUEUE, 614400) = OK # getrlimit(RLIMIT_MSGQUEUE) = 614400 ok 8 # 614400 <= 614400 # lim = RLIMIT_NICE # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_NICE, 0) = OK # getrlimit(RLIMIT_NICE) = 0 ok 9 # 0 <= 0 # lim = RLIMIT_NOFILE # old_soft = 1024, old_hard = 1048576 # try_soft = 768, try_hard = 786432 # try_soft = 768, try_hard = 786432 # setrlimit(RLIMIT_NOFILE, 768) = OK # getrlimit(RLIMIT_NOFILE) = 768 ok 10 # 768 <= 768 # lim = RLIMIT_NPROC # old_soft = 127857, old_hard = 127857 # try_soft = 95892, try_hard = 95892 # try_soft = 95892, try_hard = 95892 # setrlimit(RLIMIT_NPROC, 95892) = OK # getrlimit(RLIMIT_NPROC) = 95892 ok 11 # 95892 <= 95892 # lim = RLIMIT_OFILE # old_soft = 768, old_hard = 786432 # try_soft = 576, try_hard = 589824 # try_soft = 576, try_hard = 589824 # setrlimit(RLIMIT_OFILE, 576) = OK # getrlimit(RLIMIT_OFILE) = 576 ok 12 # 576 <= 576 # lim = RLIMIT_OPEN_MAX # old_soft = 576, old_hard = 589824 # try_soft = 432, try_hard = 442368 # try_soft = 432, try_hard = 442368 # setrlimit(RLIMIT_OPEN_MAX, 432) = OK # getrlimit(RLIMIT_OPEN_MAX) = 432 ok 13 # 432 <= 432 # lim = RLIMIT_RSS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 14 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_RTPRIO # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_RTPRIO, 0) = OK # getrlimit(RLIMIT_RTPRIO) = 0 ok 15 # 0 <= 0 # lim = RLIMIT_RTTIME # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 16 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_SIGPENDING # old_soft = 127857, old_hard = 127857 # try_soft = 95892, try_hard = 95892 # try_soft = 95892, try_hard = 95892 # setrlimit(RLIMIT_SIGPENDING, 95892) = OK # getrlimit(RLIMIT_SIGPENDING) = 95892 ok 17 # 95892 <= 95892 # lim = RLIMIT_STACK # old_soft = 8388608, old_hard = -1 # try_soft = 6291456, try_hard = -1 ok 18 # SKIP hard_limit == RLIM_INFINITY # lim = RLIMIT_VMEM # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 19 # SKIP soft_limit == RLIM_INFINITY ok All tests successful. Files=7, Tests=66, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.21 cusr 0.02 csys = 0.27 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libbsd-resource-perl/ make -j12 install DESTDIR=/build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/Resource.so Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/autosplit.ix Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/times.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/setpriority.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/setrlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getpriority.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/get_prios.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/get_rlimits.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/hard.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/soft.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getrlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_find_prio.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_find_rlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nivcsw.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nvcsw.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nsignals.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/msgrcv.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/msgsnd.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/oublock.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/inblock.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nswap.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/majflt.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/minflt.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/isrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/idrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/ixrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/maxrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/stime.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/utime.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_g.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getrusage.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/BSD/Resource.pm Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/share/man/man3/BSD::Resource.3pm make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libbsd-resource-perl' in '../libbsd-resource-perl_1.2911-2_arm64.deb'. dpkg-deb: building package 'libbsd-resource-perl-dbgsym' in '../libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1101181 and its subdirectories I: Current time: Tue May 26 15:42:39 -12 2026 I: pbuilder-time-stamp: 1779853359 Wed Apr 23 21:19:41 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink04-arm64.debian.net. Wed Apr 23 21:19:41 UTC 2025 I: Preparing to do remote build '2' on codethink04-arm64.debian.net. Wed Apr 23 21:19:41 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Wed Apr 23 21:19:41 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-2CtucY' ==================================================================================== Wed Apr 23 21:19:42 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "2 libbsd-resource-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t 1.2911-2" as arguments. Wed Apr 23 21:19:42 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-lRBv3pPn" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Apr 23 21:19:43 UTC 2025 I: Downloading source for trixie/libbsd-resource-perl=1.2911-2 Reading package lists... NOTICE: 'libbsd-resource-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 77.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (dsc) [2297 B] Get:2 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (tar) [68.2 kB] Get:3 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (diff) [7200 B] Fetched 77.7 kB in 0s (7476 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libbsd-resource-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libbsd-resource-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 77.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (dsc) [2297 B] Get:2 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (tar) [68.2 kB] Get:3 http://deb.debian.org/debian trixie/main libbsd-resource-perl 1.2911-2 (diff) [7200 B] Fetched 77.7 kB in 0s (7476 kB/s) Download complete and in download only mode ============================================================================= Re-Building libbsd-resource-perl in trixie on arm64 on codethink04-arm64 now. Date: Wed Apr 23 22:19:43 BST 2025 Date UTC: Wed Apr 23 21:19:43 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_DEwc + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libbsd-resource-perl = debian-installer -o libbsd-resource-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libbsd-resource-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_DEwc --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2 --logfile b2/build.log libbsd-resource-perl_1.2911-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 24 11:19:43 +14 2025 I: pbuilder-time-stamp: 1745443183 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libbsd-resource-perl_1.2911-2.dsc] I: copying [./libbsd-resource-perl_1.2911.orig.tar.gz] I: copying [./libbsd-resource-perl_1.2911-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libbsd-resource-perl_1.2911-2.dsc: unsupported subcommand dpkg-source: info: extracting libbsd-resource-perl in libbsd-resource-perl-1.2911 dpkg-source: info: unpacking libbsd-resource-perl_1.2911.orig.tar.gz dpkg-source: info: unpacking libbsd-resource-perl_1.2911-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D01_modify_environment starting debug: Running on codethink04-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Apr 23 21:19 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=2305f37f9e2a41b8a65340d256b1bf5a LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1190316 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_DEwc --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2 --logfile b2/build.log libbsd-resource-perl_1.2911-2.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), libtest-pod-perl, libtest-pod-coverage-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 12.1 MB of archives. After unpacking 50.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.40.1-3 [1019 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 12.1 MB in 0s (65.8 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../30-libperl-dev_5.40.1-3_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-3) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../31-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../32-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../33-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../34-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:arm64 (5.40.1-3) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libbsd-resource-perl-1.2911/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libbsd-resource-perl_1.2911-2_source.changes dpkg-buildpackage: info: source package libbsd-resource-perl dpkg-buildpackage: info: source version 1.2911-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Configuring BSD::Resource... Checking whether you have certain header files... You do have . Excellent. Checking to see whether you have rlim_t... You seem to have rlim_t defined (which is nice). Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for BSD::Resource Writing MYMETA.yml and MYMETA.json Done configuring BSD::Resource. Now you may issue 'make'. Do not forget also 'make test'. If some tests fail, please rerun the tests (see INSTALL). dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' cp Resource.pm blib/lib/BSD/Resource.pm AutoSplitting blib/lib/BSD/Resource.pm (blib/lib/auto/BSD/Resource) Running Mkbootstrap for Resource () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Resource.xs > Resource.xsc chmod 644 "Resource.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 mv Resource.xsc Resource.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.2911\" -DXS_VERSION=\"1.2911\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DRlim_t=rlim_t Resource.c rm -f blib/arch/auto/BSD/Resource/Resource.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libbsd-resource-perl-1.2911=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong Resource.o -o blib/arch/auto/BSD/Resource/Resource.so \ \ chmod 755 blib/arch/auto/BSD/Resource/Resource.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' dh_auto_test -- TEST_FILES="t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t" make -j12 test TEST_VERBOSE=1 "TEST_FILES=t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t" make[2]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/get_rlimits.t t/getpriority.t t/getrlimit.t t/pod-coverage.t t/pod.t t/setpriority.t t/setrlimit.t t/get_rlimits.t ... 1..19 ok 1 # RLIMIT_AS 9 ok 2 # RLIMIT_CORE 4 ok 3 # RLIMIT_CPU 0 ok 4 # RLIMIT_DATA 2 ok 5 # RLIMIT_FSIZE 1 ok 6 # RLIMIT_LOCKS 10 ok 7 # RLIMIT_MEMLOCK 8 ok 8 # RLIMIT_MSGQUEUE 12 ok 9 # RLIMIT_NICE 13 ok 10 # RLIMIT_NOFILE 7 ok 11 # RLIMIT_NPROC 6 ok 12 # RLIMIT_OFILE 7 ok 13 # RLIMIT_OPEN_MAX 7 ok 14 # RLIMIT_RSS 5 ok 15 # RLIMIT_RTPRIO 14 ok 16 # RLIMIT_RTTIME 15 ok 17 # RLIMIT_SIGPENDING 11 ok 18 # RLIMIT_STACK 3 ok 19 # RLIMIT_VMEM 9 ok t/getpriority.t ... 1..3 # nowprio1 = 11 ok 1 # nowprio2 = 11 ok 2 # nowprio3 = 11 ok 3 ok t/getrlimit.t ..... 1..20 # k = RLIMIT_NPROC RLIMIT_RTTIME RLIMIT_FSIZE RLIMIT_MEMLOCK RLIMIT_CPU RLIMIT_RSS RLIMIT_RTPRIO RLIMIT_LOCKS RLIMIT_CORE RLIMIT_MSGQUEUE RLIMIT_NOFILE RLIMIT_SIGPENDING RLIMIT_NICE RLIMIT_VMEM RLIMIT_OFILE RLIMIT_STACK RLIMIT_DATA RLIMIT_OPEN_MAX RLIMIT_AS, v = 6 15 1 8 0 5 14 10 4 12 7 11 13 9 7 3 2 7 9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on BSD::Resource ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/BSD/Resource.pm ok t/setpriority.t ... 1..3 # nice = 0 # origprio = 11 () # gotlower = 1 () # lowerprio = 12 () ok 1 ok 2 # skipped (origprio = 11) ok 3 # skipped (euid = 2222) ok t/setrlimit.t ..... 1..19 # lim = RLIMIT_AS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 1 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_CORE # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # Rounding down to 4096 byte boundary # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_CORE, 0) = OK # getrlimit(RLIMIT_CORE) = 0 ok 2 # 0 <= 0 # lim = RLIMIT_CPU # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 3 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_DATA # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 4 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_FSIZE # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 5 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_LOCKS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 6 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_MEMLOCK # old_soft = 4200427520, old_hard = 4200427520 # try_soft = 3150320640, try_hard = 3150320640 # Rounding down to 4096 byte boundary # try_soft = 3150319616, try_hard = 3150319616 # setrlimit(RLIMIT_MEMLOCK, 3150319616) = OK # getrlimit(RLIMIT_MEMLOCK) = 3150319616 ok 7 # 3150319616 <= 3150319616 # lim = RLIMIT_MSGQUEUE # old_soft = 819200, old_hard = 819200 # try_soft = 614400, try_hard = 614400 # try_soft = 614400, try_hard = 614400 # setrlimit(RLIMIT_MSGQUEUE, 614400) = OK # getrlimit(RLIMIT_MSGQUEUE) = 614400 ok 8 # 614400 <= 614400 # lim = RLIMIT_NICE # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_NICE, 0) = OK # getrlimit(RLIMIT_NICE) = 0 ok 9 # 0 <= 0 # lim = RLIMIT_NOFILE # old_soft = 1024, old_hard = 1048576 # try_soft = 768, try_hard = 786432 # try_soft = 768, try_hard = 786432 # setrlimit(RLIMIT_NOFILE, 768) = OK # getrlimit(RLIMIT_NOFILE) = 768 ok 10 # 768 <= 768 # lim = RLIMIT_NPROC # old_soft = 127857, old_hard = 127857 # try_soft = 95892, try_hard = 95892 # try_soft = 95892, try_hard = 95892 # setrlimit(RLIMIT_NPROC, 95892) = OK # getrlimit(RLIMIT_NPROC) = 95892 ok 11 # 95892 <= 95892 # lim = RLIMIT_OFILE # old_soft = 768, old_hard = 786432 # try_soft = 576, try_hard = 589824 # try_soft = 576, try_hard = 589824 # setrlimit(RLIMIT_OFILE, 576) = OK # getrlimit(RLIMIT_OFILE) = 576 ok 12 # 576 <= 576 # lim = RLIMIT_OPEN_MAX # old_soft = 576, old_hard = 589824 # try_soft = 432, try_hard = 442368 # try_soft = 432, try_hard = 442368 # setrlimit(RLIMIT_OPEN_MAX, 432) = OK # getrlimit(RLIMIT_OPEN_MAX) = 432 ok 13 # 432 <= 432 # lim = RLIMIT_RSS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 14 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_RTPRIO # old_soft = 0, old_hard = 0 # try_soft = 0, try_hard = 0 # try_soft = 0, try_hard = 0 # setrlimit(RLIMIT_RTPRIO, 0) = OK # getrlimit(RLIMIT_RTPRIO) = 0 ok 15 # 0 <= 0 # lim = RLIMIT_RTTIME # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 16 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_SIGPENDING # old_soft = 127857, old_hard = 127857 # try_soft = 95892, try_hard = 95892 # try_soft = 95892, try_hard = 95892 # setrlimit(RLIMIT_SIGPENDING, 95892) = OK # getrlimit(RLIMIT_SIGPENDING) = 95892 ok 17 # 95892 <= 95892 # lim = RLIMIT_STACK # old_soft = 8388608, old_hard = -1 # try_soft = 6291456, try_hard = -1 ok 18 # SKIP hard_limit == RLIM_INFINITY # lim = RLIMIT_VMEM # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 19 # SKIP soft_limit == RLIM_INFINITY ok All tests successful. Files=7, Tests=66, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.22 cusr 0.03 csys = 0.29 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libbsd-resource-perl/ make -j12 install DESTDIR=/build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/Resource.so Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/autosplit.ix Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/times.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/setpriority.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/setrlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getpriority.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/get_prios.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/get_rlimits.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/hard.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/soft.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getrlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_find_prio.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_find_rlimit.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nivcsw.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nvcsw.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nsignals.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/msgrcv.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/msgsnd.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/oublock.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/inblock.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/nswap.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/majflt.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/minflt.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/isrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/idrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/ixrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/maxrss.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/stime.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/utime.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/_g.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/BSD/Resource/getrusage.al Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/BSD/Resource.pm Installing /build/reproducible-path/libbsd-resource-perl-1.2911/debian/libbsd-resource-perl/usr/share/man/man3/BSD::Resource.3pm make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libbsd-resource-perl-dbgsym' in '../libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb'. dpkg-deb: building package 'libbsd-resource-perl' in '../libbsd-resource-perl_1.2911-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1190316 and its subdirectories I: Current time: Thu Apr 24 11:20:33 +14 2025 I: pbuilder-time-stamp: 1745443233 + false + set +x Wed Apr 23 21:20:33 UTC 2025 I: Signing ./b2/libbsd-resource-perl_1.2911-2_arm64.buildinfo as libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc Wed Apr 23 21:20:33 UTC 2025 I: Signed ./b2/libbsd-resource-perl_1.2911-2_arm64.buildinfo as ./b2/libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc Wed Apr 23 21:20:33 UTC 2025 - build #2 for libbsd-resource-perl/trixie/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Wed Apr 23 21:20:33 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-lRBv3pPn, removing. /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t: total 52 drwxr-xr-x 2 jenkins jenkins 4096 Apr 23 21:19 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 23 21:20 b2 -rw-r--r-- 1 jenkins jenkins 2297 Jun 30 2022 libbsd-resource-perl_1.2911-2.dsc -rw------- 1 jenkins jenkins 38537 Apr 23 21:19 rbuildlog.sHXplgn /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1: total 140 -rw-r--r-- 1 jenkins jenkins 34735 Apr 23 21:19 build.log -rw-r--r-- 1 jenkins jenkins 36232 Apr 23 21:19 libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 7200 Apr 23 21:19 libbsd-resource-perl_1.2911-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2297 Apr 23 21:19 libbsd-resource-perl_1.2911-2.dsc -rw-r--r-- 1 jenkins jenkins 5160 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6042 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2030 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 31344 Apr 23 21:19 libbsd-resource-perl_1.2911-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1853 Apr 23 21:19 libbsd-resource-perl_1.2911-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2: total 140 -rw-r--r-- 1 jenkins jenkins 36678 Apr 23 21:20 build.log -rw-r--r-- 1 jenkins jenkins 36232 Apr 23 21:20 libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 7200 Apr 23 21:20 libbsd-resource-perl_1.2911-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2297 Apr 23 21:20 libbsd-resource-perl_1.2911-2.dsc -rw-r--r-- 1 jenkins jenkins 5160 Apr 23 21:20 libbsd-resource-perl_1.2911-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6042 Apr 23 21:20 libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2030 Apr 23 21:20 libbsd-resource-perl_1.2911-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 31344 Apr 23 21:20 libbsd-resource-perl_1.2911-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1853 Apr 23 21:20 libbsd-resource-perl_1.2911-2_source.changes Wed Apr 23 21:20:34 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. Wed Apr 23 21:20:35 UTC 2025 I: libbsd-resource-perl_1.2911-2_arm64.changes: Format: 1.8 Date: Thu, 30 Jun 2022 23:27:33 +0100 Source: libbsd-resource-perl Binary: libbsd-resource-perl libbsd-resource-perl-dbgsym Architecture: arm64 Version: 1.2911-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libbsd-resource-perl - BSD process resource limit and priority functions Changes: libbsd-resource-perl (1.2911-2) unstable; urgency=medium . [ Alex Muntada ] * Remove inactive pkg-perl members from Uploaders. . [ Damyan Ivanov ] * declare conformance with Policy 4.1.3 (no changes needed) . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Laurent Baillet ] * fix lintian file-contains-trailing-whitespace warning . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 9 to 12. * Set debhelper-compat version in Build-Depends. Checksums-Sha1: 99ee03d58a96b1c5c426021e41730a4b68757a67 36232 libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb 67d9e7fd0a719fda1cc7f92e58ba2f0b99a9b7dc 5160 libbsd-resource-perl_1.2911-2_arm64.buildinfo 7f13a07d71ded0187dc31b5c81402abb5884f299 31344 libbsd-resource-perl_1.2911-2_arm64.deb Checksums-Sha256: a10122ba9de346f35cf1b2c8e1e8689af8c86194e73c0102fce014773a914d4b 36232 libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb 57d9fb56abf7cf9b07f4eb9ad370daa1b53ae6a42640ac4d861f3c066389b119 5160 libbsd-resource-perl_1.2911-2_arm64.buildinfo 1163ee9d6d6e89f57e22e8a17e5ca58e106622a649ad1e1f19b08bb972b63cf7 31344 libbsd-resource-perl_1.2911-2_arm64.deb Files: f53ffefd7287918d952ff61559067c32 36232 debug optional libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb cec6a0f02b61d80b41c51de03c670623 5160 perl optional libbsd-resource-perl_1.2911-2_arm64.buildinfo 6b829dfdc064f1e1a1961875d56f0475 31344 perl optional libbsd-resource-perl_1.2911-2_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libbsd-resource-perl_1.2911-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libbsd-resource-perl_1.2911-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libbsd-resource-perl_1.2911-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libbsd-resource-perl_1.2911-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libbsd-resource-perl_1.2911-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libbsd-resource-perl_1.2911-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-23 21:19:40.286309668 +0000 +++ b2/build.log 2025-04-23 21:20:34.597157142 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Tue May 26 15:42:01 -12 2026 -I: pbuilder-time-stamp: 1779853321 +I: Current time: Thu Apr 24 11:19:43 +14 2025 +I: pbuilder-time-stamp: 1745443183 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -22,52 +22,84 @@ dpkg-source: info: unpacking libbsd-resource-perl_1.2911-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/1101181/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D01_modify_environment starting +debug: Running on codethink04-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Apr 23 21:19 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='3247fe2f15be4d53854e923d1d30aed8' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='1101181' - PS1='# ' - PS2='> ' + INVOCATION_ID=2305f37f9e2a41b8a65340d256b1bf5a + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1190316 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_TBqR --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1 --logfile b1/build.log libbsd-resource-perl_1.2911-2.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/pbuilderrc_DEwc --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2 --logfile b2/build.log libbsd-resource-perl_1.2911-2.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink03-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/1101181/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -145,7 +177,7 @@ Get: 33 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] -Fetched 12.1 MB in 0s (98.4 MB/s) +Fetched 12.1 MB in 0s (65.8 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) @@ -307,7 +339,11 @@ fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libbsd-resource-perl-1.2911/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libbsd-resource-perl_1.2911-2_source.changes +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libbsd-resource-perl-1.2911/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libbsd-resource-perl_1.2911-2_source.changes dpkg-buildpackage: info: source package libbsd-resource-perl dpkg-buildpackage: info: source version 1.2911-2 dpkg-buildpackage: info: source distribution unstable @@ -344,10 +380,10 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libbsd-resource-perl-1.2911' -Running Mkbootstrap for Resource () -"/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Resource.xs > Resource.xsc cp Resource.pm blib/lib/BSD/Resource.pm AutoSplitting blib/lib/BSD/Resource.pm (blib/lib/auto/BSD/Resource) +Running Mkbootstrap for Resource () +"/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Resource.xs > Resource.xsc chmod 644 "Resource.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Resource.bs blib/arch/auto/BSD/Resource/Resource.bs 644 mv Resource.xsc Resource.c @@ -390,16 +426,16 @@ ok t/getpriority.t ... 1..3 -# nowprio1 = 10 +# nowprio1 = 11 ok 1 -# nowprio2 = 10 +# nowprio2 = 11 ok 2 -# nowprio3 = 10 +# nowprio3 = 11 ok 3 ok t/getrlimit.t ..... 1..20 -# k = RLIMIT_SIGPENDING RLIMIT_NPROC RLIMIT_NICE RLIMIT_RTPRIO RLIMIT_CORE RLIMIT_DATA RLIMIT_MSGQUEUE RLIMIT_RTTIME RLIMIT_STACK RLIMIT_CPU RLIMIT_NOFILE RLIMIT_FSIZE RLIMIT_OPEN_MAX RLIMIT_LOCKS RLIMIT_RSS RLIMIT_VMEM RLIMIT_OFILE RLIMIT_AS RLIMIT_MEMLOCK, v = 11 6 13 14 4 2 12 15 3 0 7 1 7 10 5 9 7 9 8 +# k = RLIMIT_NPROC RLIMIT_RTTIME RLIMIT_FSIZE RLIMIT_MEMLOCK RLIMIT_CPU RLIMIT_RSS RLIMIT_RTPRIO RLIMIT_LOCKS RLIMIT_CORE RLIMIT_MSGQUEUE RLIMIT_NOFILE RLIMIT_SIGPENDING RLIMIT_NICE RLIMIT_VMEM RLIMIT_OFILE RLIMIT_STACK RLIMIT_DATA RLIMIT_OPEN_MAX RLIMIT_AS, v = 6 15 1 8 0 5 14 10 4 12 7 11 13 9 7 3 2 7 9 ok 1 ok 2 ok 3 @@ -432,12 +468,12 @@ t/setpriority.t ... 1..3 # nice = 0 -# origprio = 10 () +# origprio = 11 () # gotlower = 1 () -# lowerprio = 11 () +# lowerprio = 12 () ok 1 -ok 2 # skipped (origprio = 10) -ok 3 # skipped (euid = 1111) +ok 2 # skipped (origprio = 11) +ok 3 # skipped (euid = 2222) ok t/setrlimit.t ..... 1..19 @@ -551,7 +587,7 @@ ok 19 # SKIP soft_limit == RLIM_INFINITY ok All tests successful. -Files=7, Tests=66, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.21 cusr 0.02 csys = 0.27 CPU) +Files=7, Tests=66, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.22 cusr 0.03 csys = 0.29 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' make[1]: Leaving directory '/build/reproducible-path/libbsd-resource-perl-1.2911' @@ -618,8 +654,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libbsd-resource-perl' in '../libbsd-resource-perl_1.2911-2_arm64.deb'. dpkg-deb: building package 'libbsd-resource-perl-dbgsym' in '../libbsd-resource-perl-dbgsym_1.2911-2_arm64.deb'. +dpkg-deb: building package 'libbsd-resource-perl' in '../libbsd-resource-perl_1.2911-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libbsd-resource-perl_1.2911-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -627,12 +663,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1190316/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/1101181 and its subdirectories -I: Current time: Tue May 26 15:42:39 -12 2026 -I: pbuilder-time-stamp: 1779853359 +I: removing directory /srv/workspace/pbuilder/1190316 and its subdirectories +I: Current time: Thu Apr 24 11:20:33 +14 2025 +I: pbuilder-time-stamp: 1745443233 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libbsd-resource-perl_1.2911-2.diff: 67.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libbsd-resource-perl_1.2911-2.diff.gz b2/build.log: 77.7% -- replaced with stdout Compressing the 1st log... b1/build.log: 78.4% -- replaced with stdout Wed Apr 23 21:20:36 UTC 2025 I: diffoscope 294 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libbsd-resource-perl_trixie_arm64_1745443236 + touch /var/log/reproducible-builds/diffoscope_stamp_libbsd-resource-perl_trixie_arm64_1745443236 + RESULT=0 + systemd-run '--description=diffoscope on libbsd-resource-perl/1.2911-2 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_1-70180 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t --run-session -c jenkins-reproducible-trixie-diffoscope-dbd19814-de55-4f3e-80b5-78f90a9f21ce -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/dbd-tmp-wCXFZpu ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/libbsd-resource-perl_1.2911-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/libbsd-resource-perl_1.2911-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/libbsd-resource-perl_1.2911-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1/libbsd-resource-perl_1.2911-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2/libbsd-resource-perl_1.2911-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_1-70180.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/libbsd-resource-perl_1.2911-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/libbsd-resource-perl_1.2911-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/libbsd-resource-perl_1.2911-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b1/libbsd-resource-perl_1.2911-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.AQaJFM1t/b2/libbsd-resource-perl_1.2911-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 252ms CPU time consumed: 250ms _ _ _ _ _ | (_) |__ | |__ ___ __| | _ __ ___ ___ ___ _ _ _ __ ___ ___ | | | '_ \| '_ \/ __|/ _` |_____| '__/ _ \/ __|/ _ \| | | | '__/ __/ _ \_____ | | | |_) | |_) \__ \ (_| |_____| | | __/\__ \ (_) | |_| | | | (_| __/_____| |_|_|_.__/|_.__/|___/\__,_| |_| \___||___/\___/ \__,_|_| \___\___| _ _ __ ___ _ __| | | '_ \ / _ \ '__| | | |_) | __/ | | | | .__/ \___|_| |_| |_| Wed Apr 23 21:20:37 UTC 2025 I: diffoscope 294 found no differences in the changes files, and a .buildinfo file also exists. Wed Apr 23 21:20:37 UTC 2025 I: libbsd-resource-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-23 21:20:37] INFO: Starting at 2025-04-23 21:20:37.699921 [2025-04-23 21:20:37] INFO: Generating the pages of 1 package(s) [2025-04-23 21:20:38] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libbsd-resource-perl didn't produce a buildlog, even though it has been built. [2025-04-23 21:20:38] INFO: Finished at 2025-04-23 21:20:38.201144, took: 0:00:00.501231 Wed Apr 23 21:20:38 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libbsd-resource-perl.html Wed Apr 23 21:20:38 UTC 2025 I: Submitting .buildinfo files to external archives: Wed Apr 23 21:20:38 UTC 2025 I: Submitting 8.0K b1/libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc Wed Apr 23 21:21:08 UTC 2025 E: Could not submit buildinfo from b1 to http://buildinfo.debian.net/api/submit Wed Apr 23 21:21:08 UTC 2025 I: Submitting 8.0K b2/libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc Wed Apr 23 21:21:38 UTC 2025 E: Could not submit buildinfo from b2 to http://buildinfo.debian.net/api/submit Wed Apr 23 21:21:38 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Apr 23 21:21:38 UTC 2025 I: Done submitting .buildinfo files. Wed Apr 23 21:21:38 UTC 2025 I: Removing signed libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc files: removed './b1/libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc' removed './b2/libbsd-resource-perl_1.2911-2_arm64.buildinfo.asc' 1745443298 arm64 trixie libbsd-resource-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libbsd-resource-perl_1.2911-2.rbuild.log: 75.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libbsd-resource-perl_1.2911-2.rbuild.log.gz [2025-04-23 21:21:38] INFO: Starting at 2025-04-23 21:21:38.851571 [2025-04-23 21:21:38] INFO: Generating the pages of 1 package(s) [2025-04-23 21:21:39] INFO: Finished at 2025-04-23 21:21:39.366822, took: 0:00:00.515261 All cleanup done. Wed Apr 23 21:21:39 UTC 2025 - total duration: 0h 2m 0s. Wed Apr 23 21:21:39 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-WjurOXGC, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 3min 1.613s CPU time consumed: 7.474s