Running as unit: rb-build-arm64_10-69123.service ==================================================================================== Mon Apr 28 08:06:53 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_10) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Mon Apr 28 08:06:53 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-fqquecqr" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Apr 28 08:06:53 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Mon Apr 28 08:06:53 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-LkzSXl' Mon Apr 28 08:06:53 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Mon Apr 28 08:06:54 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-e8Q0Kh' ok, let's check if libsub-exporter-globexporter-perl is building anywhere yet… ok, libsub-exporter-globexporter-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libsub-exporter-globexporter-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Mon Apr 28 08:07:05 UTC 2025 I: starting to build libsub-exporter-globexporter-perl/trixie/arm64 on jenkins on '2025-04-28 08:06' Mon Apr 28 08:07:05 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_10/69123/console.log 1745827625 arm64 trixie libsub-exporter-globexporter-perl Mon Apr 28 08:07:05 UTC 2025 I: Downloading source for trixie/libsub-exporter-globexporter-perl=0.006-1 --2025-04-28 08:07:05-- http://deb.debian.org/debian/pool/main/libs/libsub-exporter-globexporter-perl/libsub-exporter-globexporter-perl_0.006-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2623 (2.6K) [text/prs.lines.tag] Saving to: ‘libsub-exporter-globexporter-perl_0.006-1.dsc’ 0K .. 100% 362M=0s 2025-04-28 08:07:05 (362 MB/s) - ‘libsub-exporter-globexporter-perl_0.006-1.dsc’ saved [2623/2623] --2025-04-28 08:07:05-- http://deb.debian.org/debian/pool/main/libs/libsub-exporter-globexporter-perl/libsub-exporter-globexporter-perl_0.006-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2623 (2.6K) [text/prs.lines.tag] Saving to: ‘libsub-exporter-globexporter-perl_0.006-1.dsc’ 0K .. 100% 362M=0s 2025-04-28 08:07:05 (362 MB/s) - ‘libsub-exporter-globexporter-perl_0.006-1.dsc’ saved [2623/2623] Mon Apr 28 08:07:05 UTC 2025 I: libsub-exporter-globexporter-perl_0.006-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libsub-exporter-globexporter-perl Binary: libsub-exporter-globexporter-perl Architecture: all Version: 0.006-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Sub-Exporter-GlobExporter Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libsub-exporter-perl , libtest-simple-perl , perl Package-List: libsub-exporter-globexporter-perl deb perl optional arch=all Checksums-Sha1: 292a18682b6c8d7230c127bad52b805d5c08134b 17178 libsub-exporter-globexporter-perl_0.006.orig.tar.gz ebf5b3c0b272c72d9ab960eb9cef34d8ec2db85b 2480 libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz Checksums-Sha256: de743f08026701c2a6a222a8b41c4cdc254b1a4afe7ef98987cd3aba4ce52696 17178 libsub-exporter-globexporter-perl_0.006.orig.tar.gz 4308bb7f951df51f1f2d6c7a803bda7035cc5e6be75c04a0ac6410d9fae1fb7c 2480 libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz Files: edfdcdc925e0c776c02d7e5e12e0286e 17178 libsub-exporter-globexporter-perl_0.006.orig.tar.gz 55eb0beaae8ab79216d739c5b9dacfc0 2480 libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz Dgit: a04addf5fc87ce637062796505b4df9afddb2737 debian archive/debian/0.006-1 https://git.dgit.debian.org/libsub-exporter-globexporter-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmO3IddfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZCNBAAnE9W/FlDS2QU3w5n63zndRRcMLHDBAMj+fZ8t5CyItAA61HdesyWN43K j4rFRE72IMnICPyZzJXPo7QDb1X7CKWayAw04QZ5F+gighel57QrP5pNzuyJupXa S453rOnv/6pAok40jwrNnIjqVVosxa55lHXkykaxTWTZ2e6jlHvQ7tcWRI5qYUXH 3ItmZCwi6ToifdyUHKUlDV3kRZk4deYWVoa/Ty0CnOIV+fceKfeskfebCbXNhF7G UhKDNrEnpCqZb4diuXzXXpt9FvZaUzoKuosujI+iNICYZ9le/K1fWbtR58xkKyES O8DvXQrMly7WyPtWbmkDGOIMMIbLSoY+dc8f3IAV0ERbuytA/YsZyTpEtHU/xsRx 8t0J5pm2Fq/faKD2Yqz/ivaa7llAqfDkEbyNvOsjclRE7ST0M9Ay+0cNq9HBd9E5 yHhZ1BoCD+M3V9E1F5P92fAiLB3m0zg5s1gdKlKhapZnRJfw0hPlfc15bDpFARcc qs1GkQDNOm3mIax/86NaosTbBVTkEG/Q3tLUlx8QHqPq3/mozKUopxBXwnuC7Xiw hUdfhQukjHfq1K28FPEvIO+I4/HFuqHm2mjx8ubSdPFCDwxTTXawkOzm+vH4dXPe dugCoMAeX2tAIwjayxe+/7XxDNnEiszmi8qF/pAIl26Dm4cwt1o= =uw8I -----END PGP SIGNATURE----- Mon Apr 28 08:07:05 UTC 2025 I: Checking whether the package is not for us Mon Apr 28 08:07:05 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Mon Apr 28 08:07:05 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Mon Apr 28 08:07:05 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Mon Apr 28 08:07:05 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-vbjyNm' ==================================================================================== Mon Apr 28 08:07:07 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libsub-exporter-globexporter-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo 0.006-1" as arguments. Mon Apr 28 08:07:07 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-YgdgK5gJ" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Apr 28 08:07:07 UTC 2025 I: Downloading source for trixie/libsub-exporter-globexporter-perl=0.006-1 Reading package lists... NOTICE: 'libsub-exporter-globexporter-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 22.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (dsc) [2623 B] Get:2 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (tar) [17.2 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (diff) [2480 B] Fetched 22.3 kB in 0s (211 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libsub-exporter-globexporter-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 22.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (dsc) [2623 B] Get:2 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (tar) [17.2 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (diff) [2480 B] Fetched 22.3 kB in 0s (211 kB/s) Download complete and in download only mode ============================================================================= Building libsub-exporter-globexporter-perl in trixie on arm64 on codethink04-arm64 now. Date: Mon Apr 28 09:07:07 BST 2025 Date UTC: Mon Apr 28 08:07:07 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Sun Apr 27 20:07:07 -12 2025 I: pbuilder-time-stamp: 1745827627 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libsub-exporter-globexporter-perl_0.006-1.dsc] I: copying [./libsub-exporter-globexporter-perl_0.006.orig.tar.gz] I: copying [./libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libsub-exporter-globexporter-perl_0.006-1.dsc: unsupported subcommand dpkg-source: info: extracting libsub-exporter-globexporter-perl in libsub-exporter-globexporter-perl-0.006 dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006.orig.tar.gz dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/57119/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='49c0c811217742c38fd3e49ce1bb543a' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='57119' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_2knI --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1 --logfile b1/build.log libsub-exporter-globexporter-perl_0.006-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-34-cloud-arm64 #1 SMP Debian 6.1.135-1 (2025-04-25) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/57119/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libsub-exporter-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libparams-util-perl{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 11.0 MB of archives. After unpacking 45.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libparams-util-perl arm64 1.102-3+b1 [23.7 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsub-exporter-perl all 0.990-1 [50.6 kB] Fetched 11.0 MB in 0s (105 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../29-libparams-util-perl_1.102-3+b1_arm64.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../30-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../31-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../32-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsub-exporter-globexporter-perl_0.006-1_source.changes dpkg-buildpackage: info: source package libsub-exporter-globexporter-perl dpkg-buildpackage: info: source version 0.006-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sub::Exporter::GlobExporter Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' cp lib/Sub/Exporter/GlobExporter.pm blib/lib/Sub/Exporter/GlobExporter.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker 6.78 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Spec any 3.91 # Test::More 0.96 1.302199 # lib any 0.65 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- ---- ----- # Scalar::Util any 1.63 # Sub::Exporter any 0.990 # strict any 1.13 # warnings any 1.70 # t/00-report-prereqs.t .. 1..1 ok 1 - Reported prereqs ok t/export.t ............. ok 1 - $TestGlob was just assigned to ok 2 - ...so $Alpha is set ok 3 - we updated $Alpha so $TestGlob::A is updated ok 4 - updated local $Alpha ok 5 - updated local $Alpha so $TestGlob::A is updated ok 6 - localization over ($Alpha) ok 7 - localization over ($TestGlob::Alpha) ok 8 - imported $Alpha as Ctx ok 9 - imported $Alpha as Ctx ok 10 - imported *Alpha into $Ctx ok 11 - still globby 1..11 ok All tests successful. Files=2, Tests=12, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.27 cusr 0.06 csys = 0.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-exporter-globexporter-perl/ make -j12 install DESTDIR=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' Manifying 1 pod document Installing /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl/usr/share/perl5/Sub/Exporter/GlobExporter.pm Installing /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl/usr/share/man/man3/Sub::Exporter::GlobExporter.3pm make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsub-exporter-globexporter-perl' in '../libsub-exporter-globexporter-perl_0.006-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libsub-exporter-globexporter-perl_0.006-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/57119 and its subdirectories I: Current time: Sun Apr 27 20:07:26 -12 2025 I: pbuilder-time-stamp: 1745827646 Mon Apr 28 08:07:26 UTC 2025 I: Signing ./b1/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo as libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc Mon Apr 28 08:07:26 UTC 2025 I: Signed ./b1/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo as ./b1/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc Mon Apr 28 08:07:26 UTC 2025 - build #1 for libsub-exporter-globexporter-perl/trixie/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Mon Apr 28 08:07:26 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-YgdgK5gJ, removing. /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 28 08:07 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 28 08:07 b2 -rw-r--r-- 1 jenkins jenkins 2623 Jan 5 2023 libsub-exporter-globexporter-perl_0.006-1.dsc -rw------- 1 jenkins jenkins 3914 Apr 28 08:07 rbuildlog.4QcQhLY /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1: total 84 -rw-r--r-- 1 jenkins jenkins 22532 Apr 28 08:07 build.log -rw-r--r-- 1 jenkins jenkins 2480 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2623 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1.dsc -rw-r--r-- 1 jenkins jenkins 7756 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_all.deb -rw-r--r-- 1 jenkins jenkins 4839 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5721 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1497 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 2031 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_source.changes -rw-r--r-- 1 jenkins jenkins 17178 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2: total 0 Mon Apr 28 08:07:27 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Apr 27 20:07:07 -12 2025 I: pbuilder-time-stamp: 1745827627 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libsub-exporter-globexporter-perl_0.006-1.dsc] I: copying [./libsub-exporter-globexporter-perl_0.006.orig.tar.gz] I: copying [./libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libsub-exporter-globexporter-perl_0.006-1.dsc: unsupported subcommand dpkg-source: info: extracting libsub-exporter-globexporter-perl in libsub-exporter-globexporter-perl-0.006 dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006.orig.tar.gz dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/57119/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='49c0c811217742c38fd3e49ce1bb543a' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='57119' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_2knI --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1 --logfile b1/build.log libsub-exporter-globexporter-perl_0.006-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-34-cloud-arm64 #1 SMP Debian 6.1.135-1 (2025-04-25) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/57119/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libsub-exporter-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libparams-util-perl{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 11.0 MB of archives. After unpacking 45.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libparams-util-perl arm64 1.102-3+b1 [23.7 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsub-exporter-perl all 0.990-1 [50.6 kB] Fetched 11.0 MB in 0s (105 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../29-libparams-util-perl_1.102-3+b1_arm64.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../30-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../31-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../32-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsub-exporter-globexporter-perl_0.006-1_source.changes dpkg-buildpackage: info: source package libsub-exporter-globexporter-perl dpkg-buildpackage: info: source version 0.006-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sub::Exporter::GlobExporter Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' cp lib/Sub/Exporter/GlobExporter.pm blib/lib/Sub/Exporter/GlobExporter.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker 6.78 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Spec any 3.91 # Test::More 0.96 1.302199 # lib any 0.65 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- ---- ----- # Scalar::Util any 1.63 # Sub::Exporter any 0.990 # strict any 1.13 # warnings any 1.70 # t/00-report-prereqs.t .. 1..1 ok 1 - Reported prereqs ok t/export.t ............. ok 1 - $TestGlob was just assigned to ok 2 - ...so $Alpha is set ok 3 - we updated $Alpha so $TestGlob::A is updated ok 4 - updated local $Alpha ok 5 - updated local $Alpha so $TestGlob::A is updated ok 6 - localization over ($Alpha) ok 7 - localization over ($TestGlob::Alpha) ok 8 - imported $Alpha as Ctx ok 9 - imported $Alpha as Ctx ok 10 - imported *Alpha into $Ctx ok 11 - still globby 1..11 ok All tests successful. Files=2, Tests=12, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.27 cusr 0.06 csys = 0.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-exporter-globexporter-perl/ make -j12 install DESTDIR=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' Manifying 1 pod document Installing /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl/usr/share/perl5/Sub/Exporter/GlobExporter.pm Installing /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl/usr/share/man/man3/Sub::Exporter::GlobExporter.3pm make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsub-exporter-globexporter-perl' in '../libsub-exporter-globexporter-perl_0.006-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libsub-exporter-globexporter-perl_0.006-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/57119 and its subdirectories I: Current time: Sun Apr 27 20:07:26 -12 2025 I: pbuilder-time-stamp: 1745827646 Mon Apr 28 08:07:28 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Mon Apr 28 08:07:28 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Mon Apr 28 08:07:28 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Mon Apr 28 08:07:28 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-sEoYfE' ==================================================================================== Sun May 31 14:30:30 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libsub-exporter-globexporter-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo 0.006-1" as arguments. Sun May 31 14:30:30 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-KvrhRfM2" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sun May 31 14:30:30 UTC 2026 I: Downloading source for trixie/libsub-exporter-globexporter-perl=0.006-1 Reading package lists... NOTICE: 'libsub-exporter-globexporter-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 22.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (dsc) [2623 B] Get:2 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (tar) [17.2 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (diff) [2480 B] Fetched 22.3 kB in 0s (1350 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libsub-exporter-globexporter-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-exporter-globexporter-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 22.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (dsc) [2623 B] Get:2 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (tar) [17.2 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-exporter-globexporter-perl 0.006-1 (diff) [2480 B] Fetched 22.3 kB in 0s (1350 kB/s) Download complete and in download only mode ============================================================================= Re-Building libsub-exporter-globexporter-perl in trixie on arm64 on codethink03-arm64 now. Date: Sun May 31 15:30:30 BST 2026 Date UTC: Sun May 31 14:30:30 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_vyz2 + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libsub-exporter-globexporter-perl = debian-installer -o libsub-exporter-globexporter-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libsub-exporter-globexporter-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_vyz2 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2 --logfile b2/build.log libsub-exporter-globexporter-perl_0.006-1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Jun 1 04:30:30 +14 2026 I: pbuilder-time-stamp: 1780237830 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libsub-exporter-globexporter-perl_0.006-1.dsc] I: copying [./libsub-exporter-globexporter-perl_0.006.orig.tar.gz] I: copying [./libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libsub-exporter-globexporter-perl_0.006-1.dsc: unsupported subcommand dpkg-source: info: extracting libsub-exporter-globexporter-perl in libsub-exporter-globexporter-perl-0.006 dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006.orig.tar.gz dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 May 31 14:30 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=4454f843cbb9487a8f23af07607ad69f LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=3198316 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_vyz2 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2 --logfile b2/build.log libsub-exporter-globexporter-perl_0.006-1.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libsub-exporter-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libparams-util-perl{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 11.0 MB of archives. After unpacking 45.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libparams-util-perl arm64 1.102-3+b1 [23.7 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsub-exporter-perl all 0.990-1 [50.6 kB] Fetched 11.0 MB in 0s (82.2 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../29-libparams-util-perl_1.102-3+b1_arm64.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../30-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../31-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../32-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libsub-exporter-globexporter-perl_0.006-1_source.changes dpkg-buildpackage: info: source package libsub-exporter-globexporter-perl dpkg-buildpackage: info: source version 0.006-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sub::Exporter::GlobExporter Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' cp lib/Sub/Exporter/GlobExporter.pm blib/lib/Sub/Exporter/GlobExporter.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker 6.78 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Spec any 3.91 # Test::More 0.96 1.302199 # lib any 0.65 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- ---- ----- # Scalar::Util any 1.63 # Sub::Exporter any 0.990 # strict any 1.13 # warnings any 1.70 # t/00-report-prereqs.t .. 1..1 ok 1 - Reported prereqs ok t/export.t ............. ok 1 - $TestGlob was just assigned to ok 2 - ...so $Alpha is set ok 3 - we updated $Alpha so $TestGlob::A is updated ok 4 - updated local $Alpha ok 5 - updated local $Alpha so $TestGlob::A is updated ok 6 - localization over ($Alpha) ok 7 - localization over ($TestGlob::Alpha) ok 8 - imported $Alpha as Ctx ok 9 - imported $Alpha as Ctx ok 10 - imported *Alpha into $Ctx ok 11 - still globby 1..11 ok All tests successful. Files=2, Tests=12, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.28 cusr 0.04 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-exporter-globexporter-perl/ make -j12 install DESTDIR=/build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' Manifying 1 pod document Installing /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl/usr/share/perl5/Sub/Exporter/GlobExporter.pm Installing /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/debian/libsub-exporter-globexporter-perl/usr/share/man/man3/Sub::Exporter::GlobExporter.3pm make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsub-exporter-globexporter-perl' in '../libsub-exporter-globexporter-perl_0.006-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libsub-exporter-globexporter-perl_0.006-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3198316 and its subdirectories I: Current time: Mon Jun 1 04:30:56 +14 2026 I: pbuilder-time-stamp: 1780237856 + false + set +x Sun May 31 14:30:56 UTC 2026 I: Signing ./b2/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo as libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc Sun May 31 14:30:56 UTC 2026 I: Signed ./b2/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo as ./b2/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc Sun May 31 14:30:56 UTC 2026 - build #2 for libsub-exporter-globexporter-perl/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Sun May 31 14:30:56 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-KvrhRfM2, removing. /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Apr 28 08:07 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 28 08:07 b2 -rw-r--r-- 1 jenkins jenkins 2623 Jan 5 2023 libsub-exporter-globexporter-perl_0.006-1.dsc -rw------- 1 jenkins jenkins 26747 Apr 28 08:07 rbuildlog.4QcQhLY /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1: total 84 -rw-r--r-- 1 jenkins jenkins 22532 Apr 28 08:07 build.log -rw-r--r-- 1 jenkins jenkins 2480 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2623 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1.dsc -rw-r--r-- 1 jenkins jenkins 7756 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_all.deb -rw-r--r-- 1 jenkins jenkins 4839 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5721 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1497 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 2031 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_source.changes -rw-r--r-- 1 jenkins jenkins 17178 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2: total 84 -rw-r--r-- 1 jenkins jenkins 24484 Apr 28 08:07 build.log -rw-r--r-- 1 jenkins jenkins 2480 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2623 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1.dsc -rw-r--r-- 1 jenkins jenkins 7756 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_all.deb -rw-r--r-- 1 jenkins jenkins 4839 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5721 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1497 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 2031 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006-1_source.changes -rw-r--r-- 1 jenkins jenkins 17178 Apr 28 08:07 libsub-exporter-globexporter-perl_0.006.orig.tar.gz Mon Apr 28 08:07:57 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Mon Apr 28 08:07:58 UTC 2025 I: libsub-exporter-globexporter-perl_0.006-1_arm64.changes: Format: 1.8 Date: Thu, 05 Jan 2023 20:13:44 +0100 Source: libsub-exporter-globexporter-perl Binary: libsub-exporter-globexporter-perl Architecture: all Version: 0.006-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libsub-exporter-globexporter-perl - module for exporting shared globs Changes: libsub-exporter-globexporter-perl (0.006-1) unstable; urgency=medium . * Import upstream version 0.006. * Update upstream email address. * Declare compliance with Debian Policy 4.6.2. * Set Rules-Requires-Root: no. * Drop unneeded alternative test dependency. * Annotate test-only build dependencies with . * Add /me to Uploaders. Checksums-Sha1: 8bd6786fff9ea8f8422dc02b29e5d043f5940f89 7756 libsub-exporter-globexporter-perl_0.006-1_all.deb 1d4bb7916443adcf05542d4f96ee8cef8c8ccd25 4839 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo Checksums-Sha256: 61a008bca94e1823b1e2579af015eb37446fe355d3d11223a2b84aeda4432dbe 7756 libsub-exporter-globexporter-perl_0.006-1_all.deb 30cce6d07fcd56432013315184d7e0ce6c2ba661634942c626abeea9ee9d4ed3 4839 libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo Files: 9c0caa3bd84c0c74dd7c47e38740f97a 7756 perl optional libsub-exporter-globexporter-perl_0.006-1_all.deb e1fd54e52aa18ae26dcf6d194ba4e984 4839 perl optional libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-28 08:07:27.731516023 +0000 +++ b2/build.log 2025-04-28 08:07:57.206883169 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Sun Apr 27 20:07:07 -12 2025 -I: pbuilder-time-stamp: 1745827627 +I: Current time: Mon Jun 1 04:30:30 +14 2026 +I: pbuilder-time-stamp: 1780237830 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -22,52 +22,84 @@ dpkg-source: info: unpacking libsub-exporter-globexporter-perl_0.006-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/57119/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 May 31 14:30 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='49c0c811217742c38fd3e49ce1bb543a' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='57119' - PS1='# ' - PS2='> ' + INVOCATION_ID=4454f843cbb9487a8f23af07607ad69f + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=3198316 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_2knI --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1 --logfile b1/build.log libsub-exporter-globexporter-perl_0.006-1.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/pbuilderrc_vyz2 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2 --logfile b2/build.log libsub-exporter-globexporter-perl_0.006-1.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-34-cloud-arm64 #1 SMP Debian 6.1.135-1 (2025-04-25) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/57119/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -138,7 +170,7 @@ Get: 31 http://deb.debian.org/debian trixie/main arm64 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsub-exporter-perl all 0.990-1 [50.6 kB] -Fetched 11.0 MB in 0s (105 MB/s) +Fetched 11.0 MB in 0s (82.2 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) @@ -285,7 +317,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsub-exporter-globexporter-perl_0.006-1_source.changes +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libsub-exporter-globexporter-perl-0.006/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libsub-exporter-globexporter-perl_0.006-1_source.changes dpkg-buildpackage: info: source package libsub-exporter-globexporter-perl dpkg-buildpackage: info: source version 0.006-1 dpkg-buildpackage: info: source distribution unstable @@ -374,7 +410,7 @@ 1..11 ok All tests successful. -Files=2, Tests=12, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.27 cusr 0.06 csys = 0.37 CPU) +Files=2, Tests=12, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.28 cusr 0.04 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-exporter-globexporter-perl-0.006' create-stamp debian/debhelper-build-stamp @@ -407,12 +443,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/3198316/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/57119 and its subdirectories -I: Current time: Sun Apr 27 20:07:26 -12 2025 -I: pbuilder-time-stamp: 1745827646 +I: removing directory /srv/workspace/pbuilder/3198316 and its subdirectories +I: Current time: Mon Jun 1 04:30:56 +14 2026 +I: pbuilder-time-stamp: 1780237856 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.diff: 67.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.diff.gz b2/build.log: 74.0% -- replaced with stdout Compressing the 1st log... b1/build.log: 74.8% -- replaced with stdout Mon Apr 28 08:07:59 UTC 2025 I: diffoscope 294 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libsub-exporter-globexporter-perl_trixie_arm64_1745827679 + touch /var/log/reproducible-builds/diffoscope_stamp_libsub-exporter-globexporter-perl_trixie_arm64_1745827679 + RESULT=0 + systemd-run '--description=diffoscope on libsub-exporter-globexporter-perl/0.006-1 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_10-69123 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo --run-session -c jenkins-reproducible-trixie-diffoscope-3acc7339-4798-448d-8e9a-f95c8e1cce06 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/dbd-tmp-eYbijHH ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/libsub-exporter-globexporter-perl_0.006-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/libsub-exporter-globexporter-perl_0.006-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/libsub-exporter-globexporter-perl_0.006-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1/libsub-exporter-globexporter-perl_0.006-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2/libsub-exporter-globexporter-perl_0.006-1_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_10-69123.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/libsub-exporter-globexporter-perl_0.006-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/libsub-exporter-globexporter-perl_0.006-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/libsub-exporter-globexporter-perl_0.006-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b1/libsub-exporter-globexporter-perl_0.006-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.wnLusfYo/b2/libsub-exporter-globexporter-perl_0.006-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 223ms CPU time consumed: 224ms _ _ _ _ _ | (_) |__ ___ _ _| |__ _____ ___ __ ___ _ __| |_ ___ _ __ | | | '_ \/ __| | | | '_ \ _____ / _ \ \/ / '_ \ / _ \| '__| __/ _ \ '__|____ | | | |_) \__ \ |_| | |_) |_____| __/> <| |_) | (_) | | | || __/ | |_____| |_|_|_.__/|___/\__,_|_.__/ \___/_/\_\ .__/ \___/|_| \__\___|_| |_| _ _ _ __ _| | ___ | |__ _____ ___ __ ___ _ __| |_ ___ _ __ _ __ ___ / _` | |/ _ \| '_ \ / _ \ \/ / '_ \ / _ \| '__| __/ _ \ '__|____| '_ \ / _ \ | (_| | | (_) | |_) | __/> <| |_) | (_) | | | || __/ | |_____| |_) | __/ \__, |_|\___/|_.__/ \___/_/\_\ .__/ \___/|_| \__\___|_| | .__/ \___| |___/ |_| |_| _ _ __| | | '__| | | | | | |_| |_| Mon Apr 28 08:07:59 UTC 2025 I: diffoscope 294 found no differences in the changes files, and a .buildinfo file also exists. Mon Apr 28 08:07:59 UTC 2025 I: libsub-exporter-globexporter-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-28 08:08:00] INFO: Starting at 2025-04-28 08:08:00.094247 [2025-04-28 08:08:00] INFO: Generating the pages of 1 package(s) [2025-04-28 08:08:00] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libsub-exporter-globexporter-perl didn't produce a buildlog, even though it has been built. [2025-04-28 08:08:00] INFO: Finished at 2025-04-28 08:08:00.549287, took: 0:00:00.455047 Mon Apr 28 08:08:00 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libsub-exporter-globexporter-perl.html Mon Apr 28 08:08:00 UTC 2025 I: Submitting .buildinfo files to external archives: Mon Apr 28 08:08:00 UTC 2025 I: Submitting 8.0K b1/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc Mon Apr 28 08:08:30 UTC 2025 E: Could not submit buildinfo from b1 to http://buildinfo.debian.net/api/submit Mon Apr 28 08:08:30 UTC 2025 I: Submitting 8.0K b2/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc https://buildinfo.debian.net/fdbc2de90eb1cbab3cc1ccb464545c1f4d7f18c1/libsub-exporter-globexporter-perl_0.006-1_all Mon Apr 28 08:08:54 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Apr 28 08:08:54 UTC 2025 I: Done submitting .buildinfo files. Mon Apr 28 08:08:54 UTC 2025 I: Removing signed libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc files: removed './b1/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc' removed './b2/libsub-exporter-globexporter-perl_0.006-1_arm64.buildinfo.asc' 1745827734 arm64 trixie libsub-exporter-globexporter-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.rbuild.log: 72.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libsub-exporter-globexporter-perl_0.006-1.rbuild.log.gz [2025-04-28 08:08:54] INFO: Starting at 2025-04-28 08:08:54.787527 [2025-04-28 08:08:54] INFO: Generating the pages of 1 package(s) [2025-04-28 08:08:55] INFO: Finished at 2025-04-28 08:08:55.233611, took: 0:00:00.446090 All cleanup done. Mon Apr 28 08:08:55 UTC 2025 - total duration: 0h 1m 6s. Mon Apr 28 08:08:55 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-fqquecqr, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 2.161s CPU time consumed: 6.967s