Running as unit: rb-build-arm64_11-124277.service; invocation ID: 2361a7b4c6104100b2a21dd92894b69f ==================================================================================== Fri Sep 19 00:13:19 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_11) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Fri Sep 19 00:13:19 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-eBRMftKn" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 19 00:13:19 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Sep 19 00:13:19 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-tTU6LU' Fri Sep 19 00:13:19 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Sep 19 00:13:19 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-rcazxM' ok, let's check if libimage-size-perl is building anywhere yet… ok, libimage-size-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libimage-size-perl in forky on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Sep 19 00:13:35 UTC 2025 I: starting to build libimage-size-perl/forky/arm64 on jenkins on '2025-09-19 00:13' Fri Sep 19 00:13:35 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_11/124277/console.log 1758240815 arm64 forky libimage-size-perl Fri Sep 19 00:13:35 UTC 2025 I: Downloading source for forky/libimage-size-perl=3.300-3 --2025-09-19 00:13:35-- http://deb.debian.org/debian/pool/main/libi/libimage-size-perl/libimage-size-perl_3.300-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2112 (2.1K) [text/prs.lines.tag] Saving to: ‘libimage-size-perl_3.300-3.dsc’ 0K .. 100% 227M=0s 2025-09-19 00:13:35 (227 MB/s) - ‘libimage-size-perl_3.300-3.dsc’ saved [2112/2112] --2025-09-19 00:13:35-- http://deb.debian.org/debian/pool/main/libi/libimage-size-perl/libimage-size-perl_3.300-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2112 (2.1K) [text/prs.lines.tag] Saving to: ‘libimage-size-perl_3.300-3.dsc’ 0K .. 100% 227M=0s 2025-09-19 00:13:35 (227 MB/s) - ‘libimage-size-perl_3.300-3.dsc’ saved [2112/2112] Fri Sep 19 00:13:35 UTC 2025 I: libimage-size-perl_3.300-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libimage-size-perl Binary: libimage-size-perl Architecture: all Version: 3.300-3 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Image-Size Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: perl Package-List: libimage-size-perl deb perl optional arch=all Checksums-Sha1: 9f041858d9b8aa85e2fe87f15efac70c3da1a8af 237954 libimage-size-perl_3.300.orig.tar.gz 1a276c18fa9ab8039d40e4f11921470e42ed7950 5408 libimage-size-perl_3.300-3.debian.tar.xz Checksums-Sha256: 53c9b1f86531cde060ee63709d1fda73cabc0cf2d581d29b22b014781b9f026b 237954 libimage-size-perl_3.300.orig.tar.gz 67dd9f0f6b4af88dcaa1eb42e55dd35d7dde4b963cc6e68492701b6a09623783 5408 libimage-size-perl_3.300-3.debian.tar.xz Files: c8f7f5097cadb984e57e9c0cad1f16b3 237954 libimage-size-perl_3.300.orig.tar.gz 50166fb0f178b63d4881d84847ba23ef 5408 libimage-size-perl_3.300-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNIn0wACgkQV5wWDUye I+h+/hAAmnXxek460BTMdxjYbqh656GSaZoww7i53UBp22TzTgxLuJMSDeiUpPvZ BIpEmmTKbvrTpyzEKrZUTrmZIGcqV67KAOZh3G0aM7mb0W/K3KFeV5ZLV3xgoyLf yW2XV0hFn9KVgKWWIGs4PdPJ2rO3MZ4j9+3tznnBJrkduXFvgBAc2SC6z6LrzaME aMufS2LiQirX6942+L/lv4JOfdGiz2KSvgVCTm3qQOJK+fQZKQscgQUEjkBCRVSb YbkL93yH7blFugzFSLDvcJGVmTZCXWlrCDmv6JBsWnr2IA1eYtyreYnmpMeIrr2H S+4AVDHNXCRZogwTgVqmA/4sIi3k7LUvTjN/55jsryZH+rBxYfn9MfTNe30WZraB NG1HLse7BUbpj0U9ZmErwygNDJ1KlQJY5YdsJSrG+oo2Ak3uGMYiOJTSwk2poCjG eBehW59t+b9UdFOoY5PU4/VefZFy4sogbeq+qvyR0fiqJuZGQ5l9ppLR9bJ/KVof qq4kh50H4aD0yaq2ixC9XtFDWaCnrbt1MnzximKAR6gwxpkHbcCI/w8mnSC0DVQc Df7v6BxmlAjXRKnNoT4EtijB9sTVUAv9fnPlRzsaIi/6TJ+5nUY6OotXslXYfIXx PIRFT+FASZPvW5HKGz6lylENLZGPgOIYx/20NfhnXOG2rOk91Vo= =KWLE -----END PGP SIGNATURE----- Fri Sep 19 00:13:35 UTC 2025 I: Checking whether the package is not for us Fri Sep 19 00:13:35 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Fri Sep 19 00:13:35 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Fri Sep 19 00:13:35 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Sep 19 00:13:35 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-DMWSBf' ==================================================================================== Fri Sep 19 00:13:36 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libimage-size-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3 3.300-3" as arguments. Fri Sep 19 00:13:36 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-6hQFOvEq" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 19 00:13:36 UTC 2025 I: Downloading source for forky/libimage-size-perl=3.300-3 Reading package lists... NOTICE: 'libimage-size-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 245 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (dsc) [2112 B] Get:2 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (tar) [238 kB] Get:3 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (diff) [5408 B] Fetched 245 kB in 0s (3430 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libimage-size-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 245 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (dsc) [2112 B] Get:2 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (tar) [238 kB] Get:3 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (diff) [5408 B] Fetched 245 kB in 0s (3430 kB/s) Download complete and in download only mode ============================================================================= Building libimage-size-perl in forky on arm64 on codethink04-arm64 now. Date: Fri Sep 19 01:13:37 BST 2025 Date UTC: Fri Sep 19 00:13:37 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 18 12:13:37 -12 2025 I: pbuilder-time-stamp: 1758240817 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libimage-size-perl_3.300-3.dsc] I: copying [./libimage-size-perl_3.300.orig.tar.gz] I: copying [./libimage-size-perl_3.300-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libimage-size-perl_3.300-3.dsc: no acceptable signature found dpkg-source: info: extracting libimage-size-perl in libimage-size-perl-3.300 dpkg-source: info: unpacking libimage-size-perl_3.300.orig.tar.gz dpkg-source: info: unpacking libimage-size-perl_3.300-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying imgsize-exit-code.patch dpkg-source: info: applying hashbang.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1738681/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='6a176d07a6164878bcb50acabdeb9212' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1738681' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_EQqZ --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1 --logfile b1/build.log libimage-size-perl_3.300-3.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1738681/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 11.0 MB of archives. After unpacking 44.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Fetched 11.0 MB in 0s (77.8 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libimage-size-perl-3.300/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libimage-size-perl_3.300-3_source.changes dpkg-buildpackage: info: source package libimage-size-perl dpkg-buildpackage: info: source version 3.300-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libimage-size-perl-3.300=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libimage-size-perl-3.300=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Warning: prerequisite Module::Build 0.28 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Image::Size Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' cp lib/Image/Size.pm blib/lib/Image/Size.pm cp imgsize blib/script/imgsize "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/imgsize Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t ..... 1..23 ok 1 - Basic GIF format test ok 2 - Test html_imgsize and basic JPG format ok 3 - Test attr_imgsize and basic XPM format ok 4 - Basic XBM format test ok 5 - Test non-existent file error catching ok 6 - Test format/file-extension mis-match ok 7 - Basic PNG format test ok 8 - Basic PPM format test ok 9 - Basic TIFF format test (1) ok 10 - Basic TIFF format test (2) ok 11 - Basic BMP format test ok 12 - Basic BMP OS/2 format test ok 13 - Basic SWF format test ok 14 - Basic EMF format test ok 15 - Basic WEBP format test ok 16 - Basic ICO format test ok 17 - Basic CUR format test ok 18 - Basic CWS format test ok 19 - Basic PSD format test ok 20 - Test in-memory image data ok 21 - Test open IO::File object ok 22 - Test that it leaves open IO::File object in the same position ok 23 - JPG tag-offset bugfix ok t/magick.t .. 1..1 ok 1 - Image::Magick should not be loaded until it is needed if it available ok All tests successful. Files=2, Tests=24, 1 wallclock secs ( 0.01 usr 0.00 sys + 0.16 cusr 0.03 csys = 0.20 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libimage-size-perl/ make -j12 install DESTDIR=/build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' Manifying 1 pod document Manifying 1 pod document Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/perl5/Image/Size.pm Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man1/imgsize.1p Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man3/Image::Size.3pm Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/bin/imgsize make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libimage-size-perl' in '../libimage-size-perl_3.300-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libimage-size-perl_3.300-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libimage-size-perl_3.300-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1738681 and its subdirectories I: Current time: Thu Sep 18 12:14:10 -12 2025 I: pbuilder-time-stamp: 1758240850 Fri Sep 19 00:14:10 UTC 2025 I: Signing ./b1/libimage-size-perl_3.300-3_arm64.buildinfo as libimage-size-perl_3.300-3_arm64.buildinfo.asc Fri Sep 19 00:14:10 UTC 2025 I: Signed ./b1/libimage-size-perl_3.300-3_arm64.buildinfo as ./b1/libimage-size-perl_3.300-3_arm64.buildinfo.asc Fri Sep 19 00:14:10 UTC 2025 - build #1 for libimage-size-perl/forky/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Fri Sep 19 00:14:10 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-6hQFOvEq, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Sep 19 00:14 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 19 00:13 b2 -rw-rw-r-- 1 jenkins jenkins 2112 Oct 13 2022 libimage-size-perl_3.300-3.dsc -rw------- 1 jenkins jenkins 3297 Sep 19 00:13 rbuildlog.zoOBGtT /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1: total 100 -rw-r--r-- 1 jenkins jenkins 20676 Sep 19 00:14 build.log -rw-r--r-- 1 jenkins jenkins 5408 Sep 19 00:14 libimage-size-perl_3.300-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2112 Sep 19 00:14 libimage-size-perl_3.300-3.dsc -rw-r--r-- 1 jenkins jenkins 40832 Sep 19 00:14 libimage-size-perl_3.300-3_all.deb -rw-r--r-- 1 jenkins jenkins 4606 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5488 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1184 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1343 Sep 19 00:14 libimage-size-perl_3.300-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2: total 0 Fri Sep 19 00:14:11 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 18 12:13:37 -12 2025 I: pbuilder-time-stamp: 1758240817 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libimage-size-perl_3.300-3.dsc] I: copying [./libimage-size-perl_3.300.orig.tar.gz] I: copying [./libimage-size-perl_3.300-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libimage-size-perl_3.300-3.dsc: no acceptable signature found dpkg-source: info: extracting libimage-size-perl in libimage-size-perl-3.300 dpkg-source: info: unpacking libimage-size-perl_3.300.orig.tar.gz dpkg-source: info: unpacking libimage-size-perl_3.300-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying imgsize-exit-code.patch dpkg-source: info: applying hashbang.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1738681/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='6a176d07a6164878bcb50acabdeb9212' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1738681' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_EQqZ --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1 --logfile b1/build.log libimage-size-perl_3.300-3.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1738681/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 11.0 MB of archives. After unpacking 44.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Fetched 11.0 MB in 0s (77.8 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libimage-size-perl-3.300/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libimage-size-perl_3.300-3_source.changes dpkg-buildpackage: info: source package libimage-size-perl dpkg-buildpackage: info: source version 3.300-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libimage-size-perl-3.300=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libimage-size-perl-3.300=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Warning: prerequisite Module::Build 0.28 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Image::Size Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' cp lib/Image/Size.pm blib/lib/Image/Size.pm cp imgsize blib/script/imgsize "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/imgsize Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t ..... 1..23 ok 1 - Basic GIF format test ok 2 - Test html_imgsize and basic JPG format ok 3 - Test attr_imgsize and basic XPM format ok 4 - Basic XBM format test ok 5 - Test non-existent file error catching ok 6 - Test format/file-extension mis-match ok 7 - Basic PNG format test ok 8 - Basic PPM format test ok 9 - Basic TIFF format test (1) ok 10 - Basic TIFF format test (2) ok 11 - Basic BMP format test ok 12 - Basic BMP OS/2 format test ok 13 - Basic SWF format test ok 14 - Basic EMF format test ok 15 - Basic WEBP format test ok 16 - Basic ICO format test ok 17 - Basic CUR format test ok 18 - Basic CWS format test ok 19 - Basic PSD format test ok 20 - Test in-memory image data ok 21 - Test open IO::File object ok 22 - Test that it leaves open IO::File object in the same position ok 23 - JPG tag-offset bugfix ok t/magick.t .. 1..1 ok 1 - Image::Magick should not be loaded until it is needed if it available ok All tests successful. Files=2, Tests=24, 1 wallclock secs ( 0.01 usr 0.00 sys + 0.16 cusr 0.03 csys = 0.20 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libimage-size-perl/ make -j12 install DESTDIR=/build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' Manifying 1 pod document Manifying 1 pod document Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/perl5/Image/Size.pm Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man1/imgsize.1p Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man3/Image::Size.3pm Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/bin/imgsize make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libimage-size-perl' in '../libimage-size-perl_3.300-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libimage-size-perl_3.300-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libimage-size-perl_3.300-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1738681 and its subdirectories I: Current time: Thu Sep 18 12:14:10 -12 2025 I: pbuilder-time-stamp: 1758240850 Fri Sep 19 00:14:11 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Sep 19 00:14:11 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Sep 19 00:14:11 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Sep 19 00:14:11 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-dQxm3S' ==================================================================================== Thu Oct 22 06:37:12 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libimage-size-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3 3.300-3" as arguments. Thu Oct 22 06:37:12 UTC 2026 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-HByG2efu" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Oct 22 06:37:12 UTC 2026 I: Downloading source for forky/libimage-size-perl=3.300-3 Reading package lists... NOTICE: 'libimage-size-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 245 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (dsc) [2112 B] Get:2 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (tar) [238 kB] Get:3 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (diff) [5408 B] Fetched 245 kB in 0s (12.2 MB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libimage-size-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libimage-size-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 245 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (dsc) [2112 B] Get:2 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (tar) [238 kB] Get:3 http://deb.debian.org/debian forky/main libimage-size-perl 3.300-3 (diff) [5408 B] Fetched 245 kB in 0s (12.2 MB/s) Download complete and in download only mode ============================================================================= Re-Building libimage-size-perl in forky on arm64 on codethink03-arm64 now. Date: Thu Oct 22 07:37:13 BST 2026 Date UTC: Thu Oct 22 06:37:13 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3 + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_cPuf + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libimage-size-perl = debian-installer -o libimage-size-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libimage-size-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_cPuf --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2 --logfile b2/build.log libimage-size-perl_3.300-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Oct 22 20:37:13 +14 2026 I: pbuilder-time-stamp: 1792651033 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libimage-size-perl_3.300-3.dsc] I: copying [./libimage-size-perl_3.300.orig.tar.gz] I: copying [./libimage-size-perl_3.300-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libimage-size-perl_3.300-3.dsc: no acceptable signature found dpkg-source: info: extracting libimage-size-perl in libimage-size-perl-3.300 dpkg-source: info: unpacking libimage-size-perl_3.300.orig.tar.gz dpkg-source: info: unpacking libimage-size-perl_3.300-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying imgsize-exit-code.patch dpkg-source: info: applying hashbang.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Oct 22 06:37 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=forky EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=174808759ba8449a99c2563e8d2ff4ca LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2185615 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_cPuf --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2 --logfile b2/build.log libimage-size-perl_3.300-3.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 11.0 MB of archives. After unpacking 44.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Fetched 11.0 MB in 0s (109 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for forky I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libimage-size-perl-3.300/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libimage-size-perl_3.300-3_source.changes dpkg-buildpackage: info: source package libimage-size-perl dpkg-buildpackage: info: source version 3.300-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libimage-size-perl-3.300=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libimage-size-perl-3.300=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Warning: prerequisite Module::Build 0.28 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Image::Size Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' cp lib/Image/Size.pm blib/lib/Image/Size.pm cp imgsize blib/script/imgsize "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/imgsize Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t ..... 1..23 ok 1 - Basic GIF format test ok 2 - Test html_imgsize and basic JPG format ok 3 - Test attr_imgsize and basic XPM format ok 4 - Basic XBM format test ok 5 - Test non-existent file error catching ok 6 - Test format/file-extension mis-match ok 7 - Basic PNG format test ok 8 - Basic PPM format test ok 9 - Basic TIFF format test (1) ok 10 - Basic TIFF format test (2) ok 11 - Basic BMP format test ok 12 - Basic BMP OS/2 format test ok 13 - Basic SWF format test ok 14 - Basic EMF format test ok 15 - Basic WEBP format test ok 16 - Basic ICO format test ok 17 - Basic CUR format test ok 18 - Basic CWS format test ok 19 - Basic PSD format test ok 20 - Test in-memory image data ok 21 - Test open IO::File object ok 22 - Test that it leaves open IO::File object in the same position ok 23 - JPG tag-offset bugfix ok t/magick.t .. 1..1 ok 1 - Image::Magick should not be loaded until it is needed if it available ok All tests successful. Files=2, Tests=24, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.23 cusr 0.07 csys = 0.33 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libimage-size-perl/ make -j12 install DESTDIR=/build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libimage-size-perl-3.300' Manifying 1 pod document Manifying 1 pod document Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/perl5/Image/Size.pm Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man1/imgsize.1p Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man3/Image::Size.3pm Installing /build/reproducible-path/libimage-size-perl-3.300/debian/libimage-size-perl/usr/bin/imgsize make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libimage-size-perl' in '../libimage-size-perl_3.300-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libimage-size-perl_3.300-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libimage-size-perl_3.300-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2185615 and its subdirectories I: Current time: Thu Oct 22 20:37:46 +14 2026 I: pbuilder-time-stamp: 1792651066 + false + set +x Thu Oct 22 06:37:46 UTC 2026 I: Signing ./b2/libimage-size-perl_3.300-3_arm64.buildinfo as libimage-size-perl_3.300-3_arm64.buildinfo.asc Thu Oct 22 06:37:46 UTC 2026 I: Signed ./b2/libimage-size-perl_3.300-3_arm64.buildinfo as ./b2/libimage-size-perl_3.300-3_arm64.buildinfo.asc Thu Oct 22 06:37:46 UTC 2026 - build #2 for libimage-size-perl/forky/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu Oct 22 06:37:46 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-HByG2efu, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3: total 36 drwxrwxr-x 2 jenkins jenkins 4096 Sep 19 00:14 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 19 00:14 b2 -rw-rw-r-- 1 jenkins jenkins 2112 Oct 13 2022 libimage-size-perl_3.300-3.dsc -rw------- 1 jenkins jenkins 24274 Sep 19 00:14 rbuildlog.zoOBGtT /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1: total 100 -rw-r--r-- 1 jenkins jenkins 20676 Sep 19 00:14 build.log -rw-r--r-- 1 jenkins jenkins 5408 Sep 19 00:14 libimage-size-perl_3.300-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2112 Sep 19 00:14 libimage-size-perl_3.300-3.dsc -rw-r--r-- 1 jenkins jenkins 40832 Sep 19 00:14 libimage-size-perl_3.300-3_all.deb -rw-r--r-- 1 jenkins jenkins 4606 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5488 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1184 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1343 Sep 19 00:14 libimage-size-perl_3.300-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2: total 100 -rw-rw-r-- 1 jenkins jenkins 22613 Sep 19 00:14 build.log -rw-r--r-- 1 jenkins jenkins 5408 Sep 19 00:14 libimage-size-perl_3.300-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2112 Sep 19 00:14 libimage-size-perl_3.300-3.dsc -rw-r--r-- 1 jenkins jenkins 40832 Sep 19 00:14 libimage-size-perl_3.300-3_all.deb -rw-rw-r-- 1 jenkins jenkins 4606 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5488 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 1184 Sep 19 00:14 libimage-size-perl_3.300-3_arm64.changes -rw-rw-r-- 1 jenkins jenkins 1343 Sep 19 00:14 libimage-size-perl_3.300-3_source.changes Fri Sep 19 00:14:47 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Sep 19 00:14:47 UTC 2025 I: libimage-size-perl_3.300-3_arm64.changes: Format: 1.8 Date: Fri, 14 Oct 2022 00:28:50 +0100 Source: libimage-size-perl Binary: libimage-size-perl Architecture: all Version: 3.300-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libimage-size-perl - module for determining image sizes in several common formats Changes: libimage-size-perl (3.300-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libimage-size-perl: Add Multi-Arch: foreign. Checksums-Sha1: c86003ca00202261a67abaf26ad12f2f0f852994 40832 libimage-size-perl_3.300-3_all.deb d28a6ad5913425c3cbac9032169d91f9f31f4c45 4606 libimage-size-perl_3.300-3_arm64.buildinfo Checksums-Sha256: 758f7ece073b2a06128998d60802f3ded8aee6da2ed0424832102633c523bcae 40832 libimage-size-perl_3.300-3_all.deb 4becf1deeff721bedcdfd9cdd799f554f038997d2176be1a5386376088bc03b3 4606 libimage-size-perl_3.300-3_arm64.buildinfo Files: 17eaa3ff79b565468814fbc65bae265c 40832 perl optional libimage-size-perl_3.300-3_all.deb cafa672a29f7406f56ec243d683227a6 4606 perl optional libimage-size-perl_3.300-3_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/forky/arm64/libimage-size-perl_3.300-3_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libimage-size-perl_3.300-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-09-19 00:14:11.325573083 +0000 +++ b2/build.log 2025-09-19 00:14:47.169615771 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Sep 18 12:13:37 -12 2025 -I: pbuilder-time-stamp: 1758240817 +I: Current time: Thu Oct 22 20:37:13 +14 2026 +I: pbuilder-time-stamp: 1792651033 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration @@ -25,53 +25,85 @@ dpkg-source: info: applying hashbang.patch I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/1738681/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Oct 22 06:37 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='forky' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=forky + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='6a176d07a6164878bcb50acabdeb9212' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='1738681' - PS1='# ' - PS2='> ' + INVOCATION_ID=174808759ba8449a99c2563e8d2ff4ca + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2185615 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_EQqZ --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1 --logfile b1/build.log libimage-size-perl_3.300-3.dsc' - SUDO_GID='109' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/pbuilderrc_cPuf --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2 --logfile b2/build.log libimage-size-perl_3.300-3.dsc' + SUDO_GID=109 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/1738681/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -136,7 +168,7 @@ Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] -Fetched 11.0 MB in 0s (77.8 MB/s) +Fetched 11.0 MB in 0s (109 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) @@ -272,7 +304,11 @@ fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libimage-size-perl-3.300/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libimage-size-perl_3.300-3_source.changes +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for forky +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libimage-size-perl-3.300/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libimage-size-perl_3.300-3_source.changes dpkg-buildpackage: info: source package libimage-size-perl dpkg-buildpackage: info: source version 3.300-3 dpkg-buildpackage: info: source distribution unstable @@ -338,7 +374,7 @@ ok 1 - Image::Magick should not be loaded until it is needed if it available ok All tests successful. -Files=2, Tests=24, 1 wallclock secs ( 0.01 usr 0.00 sys + 0.16 cusr 0.03 csys = 0.20 CPU) +Files=2, Tests=24, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.23 cusr 0.07 csys = 0.33 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libimage-size-perl-3.300' create-stamp debian/debhelper-build-stamp @@ -375,12 +411,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2185615/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/1738681 and its subdirectories -I: Current time: Thu Sep 18 12:14:10 -12 2025 -I: pbuilder-time-stamp: 1758240850 +I: removing directory /srv/workspace/pbuilder/2185615 and its subdirectories +I: Current time: Thu Oct 22 20:37:46 +14 2026 +I: pbuilder-time-stamp: 1792651066 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libimage-size-perl_3.300-3.diff: 66.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libimage-size-perl_3.300-3.diff.gz b2/build.log: 72.5% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.3% -- replaced with stdout Fri Sep 19 00:14:48 UTC 2025 I: diffoscope 306 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libimage-size-perl_forky_arm64_1758240888 + touch /var/log/reproducible-builds/diffoscope_stamp_libimage-size-perl_forky_arm64_1758240888 + RESULT=0 + systemd-run '--description=diffoscope on libimage-size-perl/3.300-3 in forky/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_11-124277 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3 --run-session -c jenkins-reproducible-forky-diffoscope-6bdfd272-ebb4-46a0-a5bf-4fa13f14aeaf -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/dbd-tmp-gVuq8VG ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/libimage-size-perl_3.300-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/libimage-size-perl_3.300-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/libimage-size-perl_3.300-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1/libimage-size-perl_3.300-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2/libimage-size-perl_3.300-3_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_11-124277.service; invocation ID: 5c8a357356f440379fc5d8233fd3a12d # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/libimage-size-perl_3.300-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/libimage-size-perl_3.300-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/libimage-size-perl_3.300-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b1/libimage-size-perl_3.300-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.Y1cbnYb3/b2/libimage-size-perl_3.300-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 234ms CPU time consumed: 171ms Memory peak: 18M (swap: 0B) _ _ _ _ _ | (_) |__ (_)_ __ ___ __ _ __ _ ___ ___(_)_______ _ __ ___ | | | '_ \| | '_ ` _ \ / _` |/ _` |/ _ \_____/ __| |_ / _ \_____| '_ \ / _ \ | | | |_) | | | | | | | (_| | (_| | __/_____\__ \ |/ / __/_____| |_) | __/ |_|_|_.__/|_|_| |_| |_|\__,_|\__, |\___| |___/_/___\___| | .__/ \___| |___/ |_| _ _ __| | | '__| | | | | | |_| |_| Fri Sep 19 00:14:48 UTC 2025 I: diffoscope 306 found no differences in the changes files, and a .buildinfo file also exists. Fri Sep 19 00:14:48 UTC 2025 I: libimage-size-perl from forky built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-09-19 00:14:49] INFO: Starting at 2025-09-19 00:14:49.357889 [2025-09-19 00:14:49] INFO: Generating the pages of 1 package(s) [2025-09-19 00:14:49] CRITICAL: https://tests.reproducible-builds.org/debian/forky/arm64/libimage-size-perl didn't produce a buildlog, even though it has been built. [2025-09-19 00:14:49] INFO: Finished at 2025-09-19 00:14:49.657199, took: 0:00:00.299314 Fri Sep 19 00:14:49 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/forky/arm64/libimage-size-perl.html Fri Sep 19 00:14:49 UTC 2025 I: Removing signed libimage-size-perl_3.300-3_arm64.buildinfo.asc files: removed './b1/libimage-size-perl_3.300-3_arm64.buildinfo.asc' removed './b2/libimage-size-perl_3.300-3_arm64.buildinfo.asc' 1758240889 arm64 forky libimage-size-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libimage-size-perl_3.300-3.rbuild.log: 70.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libimage-size-perl_3.300-3.rbuild.log.gz [2025-09-19 00:14:49] INFO: Starting at 2025-09-19 00:14:49.983875 [2025-09-19 00:14:50] INFO: Generating the pages of 1 package(s) [2025-09-19 00:14:50] INFO: Finished at 2025-09-19 00:14:50.276870, took: 0:00:00.292999 All cleanup done. Fri Sep 19 00:14:50 UTC 2025 - total duration: 0h 1m 29s. Fri Sep 19 00:14:50 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-eBRMftKn, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 1min 31.185s CPU time consumed: 3.124s Memory peak: 39.2M (swap: 0B)