Running as unit: rb-build-arm64_11-71993.service ==================================================================================== Fri Nov 22 03:29:47 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_11) on jenkins, called using "codethink03-arm64 codethink04-arm64" as arguments. Fri Nov 22 03:29:47 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-uNqJ9UwA" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 03:29:47 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Nov 22 03:29:47 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-5QV1Gv' Fri Nov 22 03:29:48 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Nov 22 03:29:48 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-DUNv2h' ok, let's check if libhttp-async-perl is building anywhere yet… ok, libhttp-async-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libhttp-async-perl in unstable on arm64 on jenkins now. 1st build will be done on codethink03-arm64.debian.net. 2nd build will be done on codethink04-arm64.debian.net. ============================================================================= Fri Nov 22 03:30:03 UTC 2024 I: starting to build libhttp-async-perl/unstable/arm64 on jenkins on '2024-11-22 03:29' Fri Nov 22 03:30:03 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_11/71993/console.log 1732246203 arm64 unstable libhttp-async-perl Fri Nov 22 03:30:03 UTC 2024 I: Downloading source for unstable/libhttp-async-perl=0.33-3 --2024-11-22 03:30:03-- http://deb.debian.org/debian/pool/main/libh/libhttp-async-perl/libhttp-async-perl_0.33-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2315 (2.3K) [text/prs.lines.tag] Saving to: ‘libhttp-async-perl_0.33-3.dsc’ 0K .. 100% 340M=0s 2024-11-22 03:30:03 (340 MB/s) - ‘libhttp-async-perl_0.33-3.dsc’ saved [2315/2315] --2024-11-22 03:30:03-- http://deb.debian.org/debian/pool/main/libh/libhttp-async-perl/libhttp-async-perl_0.33-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2315 (2.3K) [text/prs.lines.tag] Saving to: ‘libhttp-async-perl_0.33-3.dsc’ 0K .. 100% 340M=0s 2024-11-22 03:30:03 (340 MB/s) - ‘libhttp-async-perl_0.33-3.dsc’ saved [2315/2315] Fri Nov 22 03:30:03 UTC 2024 I: libhttp-async-perl_0.33-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libhttp-async-perl Binary: libhttp-async-perl Architecture: all Version: 0.33-3 Maintainer: Debian Perl Group Uploaders: Ernesto Hernández-Novich (USB) , Florian Schlichting Homepage: https://metacpan.org/release/HTTP-Async Standards-Version: 3.9.8 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libnet-https-nb-perl, libtest-fatal-perl, libtest-http-server-simple-perl, libtest-pod-perl, libtest-pod-coverage-perl, libtest-tcp-perl, liburi-perl, libwww-perl, perl Package-List: libhttp-async-perl deb perl optional arch=all Checksums-Sha1: 925302725c7dd0f96d30779451997752dd0807c0 24441 libhttp-async-perl_0.33.orig.tar.gz 10b4097844d50ae43e024dc1d58a030c1e3bf041 3680 libhttp-async-perl_0.33-3.debian.tar.xz Checksums-Sha256: 5edba1562645facc36dde6ab02013b9d0a9593232430ec98165cd72a4d1196d4 24441 libhttp-async-perl_0.33.orig.tar.gz 59442baa68bc7052b47206c46deb430dcd2bf168bc0a39fe24417487044edcba 3680 libhttp-async-perl_0.33-3.debian.tar.xz Files: 947b313117d8abede2bb46364dd0d06d 24441 libhttp-async-perl_0.33.orig.tar.gz f4afeb4b8dc8213e92dfa1bd386944ad 3680 libhttp-async-perl_0.33-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNLAWAACgkQV5wWDUye I+h73w/+OaOhZo+QZZXD3oTUBOy8s7tzLXog6VtCeCvbAFe9o9JfvFGQjtnXpegu hVhp1CIjKZ7fNDCWOnjWQP4OJYQjOsn9az4YXTSw/jsCpPZnMq02gAu5op5RHpAM P++7C+86HqsqPMMLbeLz1Ov2aovZE6/PRsPdq2dzmm0XPJCqou5fZHc/Ec85natF HnyXDEmpCGn7l1DuGmSAjlBBTAYIJX4rMa+xZS5ldSrsqP5qCdSmBBEa490pfmSv +Tk20DLYzNfVN8zupze80pXxhUP/IAuY/A0mRE8qmeCz9ZAP+/TWtedK3zU6WROR PGmfRRuiFNaB8aXByMv4oclYzrj3vR6svkwDaMRAnJpB283cqn6X3oRfcul1Te+U SURt+FNp+KxYbZvcQbXd8Pl05swRxfxgiVaOdgymsYFyw3vBhGVEenPTO6rToliZ ce8RZtCMuXgdiAhd4UmiWkDPTZYS8tIQ9fNocLubcJ2EnzjAO5yFB6468dqSIoAh kjxXuNaF+RMSmXVVpoSsLvT3jUCKgsyxYQvx4/8Pw6+53Ewo3D3THMhEu09wRwqS YU7uQ2a8M6EFuN/osQzexVyvcJtN64y2fAHScGd72ulq20d3A2jhynYDuttLiIUe TCFUZBvGIwGBUZbj5O3UpL4MqU72VBsNJQ82ffZzmYHTzXPrwJg= =0OUO -----END PGP SIGNATURE----- Fri Nov 22 03:30:03 UTC 2024 I: Checking whether the package is not for us Fri Nov 22 03:30:03 UTC 2024 I: Starting 1st build on remote node codethink03-arm64.debian.net. Fri Nov 22 03:30:03 UTC 2024 I: Preparing to do remote build '1' on codethink03-arm64.debian.net. Fri Nov 22 03:30:03 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Nov 22 03:30:03 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-2mQEan' ==================================================================================== Thu Dec 25 09:53:06 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "1 libhttp-async-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj 0.33-3" as arguments. Thu Dec 25 09:53:06 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-qMZ8NlzX" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Dec 25 09:53:06 UTC 2025 I: Downloading source for unstable/libhttp-async-perl=0.33-3 Reading package lists... NOTICE: 'libhttp-async-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (dsc) [2315 B] Get:2 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (tar) [24.4 kB] Get:3 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (diff) [3680 B] Fetched 30.4 kB in 0s (1638 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libhttp-async-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (dsc) [2315 B] Get:2 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (tar) [24.4 kB] Get:3 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (diff) [3680 B] Fetched 30.4 kB in 0s (1638 kB/s) Download complete and in download only mode ============================================================================= Building libhttp-async-perl in unstable on arm64 on codethink03-arm64 now. Date: Thu Dec 25 09:53:07 GMT 2025 Date UTC: Thu Dec 25 09:53:07 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 24 21:53:07 -12 2025 I: pbuilder-time-stamp: 1766656387 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libhttp-async-perl_0.33-3.dsc] I: copying [./libhttp-async-perl_0.33.orig.tar.gz] I: copying [./libhttp-async-perl_0.33-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Oct 15 18:52:16 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libhttp-async-perl_0.33-3.dsc: no acceptable signature found dpkg-source: info: extracting libhttp-async-perl in libhttp-async-perl-0.33 dpkg-source: info: unpacking libhttp-async-perl_0.33.orig.tar.gz dpkg-source: info: unpacking libhttp-async-perl_0.33-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying no-network.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3801956/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='bb9839e1bd024f46b3356978732d001c' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3801956' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_XjN8 --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1 --logfile b1/build.log libhttp-async-perl_0.33-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3801956/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libnet-https-nb-perl, libtest-fatal-perl, libtest-http-server-simple-perl, libtest-pod-perl, libtest-pod-coverage-perl, libtest-tcp-perl, liburi-perl, libwww-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libnet-https-nb-perl; however: Package libnet-https-nb-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-fatal-perl; however: Package libtest-fatal-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-http-server-simple-perl; however: Package libtest-http-server-simple-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-tcp-perl; however: Package libtest-tcp-perl is not installed. pbuilder-satisfydepends-dummy depends on liburi-perl; however: Package liburi-perl is not installed. pbuilder-satisfydepends-dummy depends on libwww-perl; however: Package libwww-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcgi-pm-perl{a} libclone-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libencode-locale-perl{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libhttp-server-simple-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libnet-http-perl{a} libnet-https-nb-perl{a} libnet-ssleay-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-fatal-perl{a} libtest-http-server-simple-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtest-sharedfork-perl{a} libtest-tcp-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl lynx wget 0 packages upgraded, 66 newly installed, 0 to remove and 0 not upgraded. Need to get 22.9 MB of archives. After unpacking 86.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 netbase all 6.4 [12.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 openssl arm64 3.3.2-2 [1347 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 ca-certificates all 20240203 [158 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 33 http://deb.debian.org/debian unstable/main arm64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 liburi-perl all 5.30-1 [105 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libhtml-parser-perl arm64 3.83-1+b1 [97.5 kB] Get: 36 http://deb.debian.org/debian unstable/main arm64 libcgi-pm-perl all 4.66-1 [217 kB] Get: 37 http://deb.debian.org/debian unstable/main arm64 libclone-perl arm64 0.47-1+b1 [13.7 kB] Get: 38 http://deb.debian.org/debian unstable/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 39 http://deb.debian.org/debian unstable/main arm64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 40 http://deb.debian.org/debian unstable/main arm64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 41 http://deb.debian.org/debian unstable/main arm64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 42 http://deb.debian.org/debian unstable/main arm64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 43 http://deb.debian.org/debian unstable/main arm64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 44 http://deb.debian.org/debian unstable/main arm64 libio-html-perl all 1.004-3 [16.2 kB] Get: 45 http://deb.debian.org/debian unstable/main arm64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 46 http://deb.debian.org/debian unstable/main arm64 libhttp-message-perl all 7.00-2 [79.8 kB] Get: 47 http://deb.debian.org/debian unstable/main arm64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 48 http://deb.debian.org/debian unstable/main arm64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 49 http://deb.debian.org/debian unstable/main arm64 libhttp-server-simple-perl all 0.52-2 [29.4 kB] Get: 50 http://deb.debian.org/debian unstable/main arm64 perl-openssl-defaults arm64 7+b2 [6712 B] Get: 51 http://deb.debian.org/debian unstable/main arm64 libnet-ssleay-perl arm64 1.94-2 [323 kB] Get: 52 http://deb.debian.org/debian unstable/main arm64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get: 53 http://deb.debian.org/debian unstable/main arm64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 54 http://deb.debian.org/debian unstable/main arm64 libtry-tiny-perl all 0.32-1 [22.9 kB] Get: 55 http://deb.debian.org/debian unstable/main arm64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 56 http://deb.debian.org/debian unstable/main arm64 libwww-perl all 6.77-1 [183 kB] Get: 57 http://deb.debian.org/debian unstable/main arm64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 58 http://deb.debian.org/debian unstable/main arm64 libnet-https-nb-perl all 0.15-2 [9708 B] Get: 59 http://deb.debian.org/debian unstable/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 60 http://deb.debian.org/debian unstable/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 61 http://deb.debian.org/debian unstable/main arm64 libtest-fatal-perl all 0.017-1 [13.2 kB] Get: 62 http://deb.debian.org/debian unstable/main arm64 libtest-http-server-simple-perl all 0.11-2 [10.2 kB] Get: 63 http://deb.debian.org/debian unstable/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 64 http://deb.debian.org/debian unstable/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Get: 65 http://deb.debian.org/debian unstable/main arm64 libtest-sharedfork-perl all 0.35-3 [8484 B] Get: 66 http://deb.debian.org/debian unstable/main arm64 libtest-tcp-perl all 2.22-2 [22.9 kB] Fetched 22.9 MB in 0s (106 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_3.3.2-2_arm64.deb ... Unpacking openssl (3.3.2-2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../11-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../24-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../26-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../32-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../33-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libhtml-parser-perl:arm64. Preparing to unpack .../34-libhtml-parser-perl_3.83-1+b1_arm64.deb ... Unpacking libhtml-parser-perl:arm64 (3.83-1+b1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../35-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libclone-perl:arm64. Preparing to unpack .../36-libclone-perl_0.47-1+b1_arm64.deb ... Unpacking libclone-perl:arm64 (0.47-1+b1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../37-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../38-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../39-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../40-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../41-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../42-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../43-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../44-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../45-libhttp-message-perl_7.00-2_all.deb ... Unpacking libhttp-message-perl (7.00-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../46-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../47-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package libhttp-server-simple-perl. Preparing to unpack .../48-libhttp-server-simple-perl_0.52-2_all.deb ... Unpacking libhttp-server-simple-perl (0.52-2) ... Selecting previously unselected package perl-openssl-defaults:arm64. Preparing to unpack .../49-perl-openssl-defaults_7+b2_arm64.deb ... Unpacking perl-openssl-defaults:arm64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:arm64. Preparing to unpack .../50-libnet-ssleay-perl_1.94-2_arm64.deb ... Unpacking libnet-ssleay-perl:arm64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../51-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../52-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../53-libtry-tiny-perl_0.32-1_all.deb ... Unpacking libtry-tiny-perl (0.32-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../54-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../55-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libnet-https-nb-perl. Preparing to unpack .../57-libnet-https-nb-perl_0.15-2_all.deb ... Unpacking libnet-https-nb-perl (0.15-2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../58-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../59-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-fatal-perl. Preparing to unpack .../60-libtest-fatal-perl_0.017-1_all.deb ... Unpacking libtest-fatal-perl (0.017-1) ... Selecting previously unselected package libtest-http-server-simple-perl. Preparing to unpack .../61-libtest-http-server-simple-perl_0.11-2_all.deb ... Unpacking libtest-http-server-simple-perl (0.11-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../62-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../63-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Selecting previously unselected package libtest-sharedfork-perl. Preparing to unpack .../64-libtest-sharedfork-perl_0.35-3_all.deb ... Unpacking libtest-sharedfork-perl (0.35-3) ... Selecting previously unselected package libtest-tcp-perl. Preparing to unpack .../65-libtest-tcp-perl_2.22-2_all.deb ... Unpacking libtest-tcp-perl (2.22-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libclone-perl:arm64 (0.47-1+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.20) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up libtry-tiny-perl (0.32-1) ... Setting up libtest-fatal-perl (0.017-1) ... Setting up perl-openssl-defaults:arm64 (7+b2) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3+b1) ... Setting up libtest-sharedfork-perl (0.35-3) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libio-html-perl (1.004-3) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up openssl (3.3.2-2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:arm64 (1.94-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.22.5-2) ... Setting up libtest-tcp-perl (2.22-2) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libtool (2.4.7-8) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up libnet-http-perl (6.23-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:arm64 (3.83-1+b1) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libhttp-message-perl (7.00-2) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnet-https-nb-perl (0.15-2) ... Setting up libhttp-server-simple-perl (0.52-2) ... Setting up debhelper (13.20) ... Setting up libtest-http-server-simple-perl (0.11-2) ... Setting up libwww-perl (6.77-1) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libhttp-async-perl-0.33/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libhttp-async-perl_0.33-3_source.changes dpkg-buildpackage: info: source package libhttp-async-perl dpkg-buildpackage: info: source version 0.33-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libhttp-async-perl-0.33=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libhttp-async-perl-0.33=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for HTTP::Async Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' cp lib/HTTP/Async.pm blib/lib/HTTP/Async.pm cp lib/HTTP/Async/Polite.pm blib/lib/HTTP/Async/Polite.pm Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bad-connections.t ....... 1..5 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:42341/ ok 2 - Added request to the queue - http://localhost:42341/foo/bar?break_connection=before_content ok 3 - Got a '200' response ok 4 - Added request to the queue - http://localhost:42341/foo/bar?break_connection=before_headers ok 5 - Got a '504' response ok t/bad-headers.t ........... 1..3 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:43995/ ok 2 - Added request to the queue ok 3 - Got a response ok t/bad-hosts.t ............. skipped: enable these tests by setting REAL_SERVERS t/cookies.t ............... 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:33857/ ok 2 - Added request to the queue ok 3 - Got cookie in response 'x=test; path=/' ok 4 - Got cookie from cookie jar 'Set-Cookie3: x=test; path="/"; domain=localhost.local; path_spec; discard; version=0 # ' ok t/dead-connection.t ....... 1..10 ok 1 - opened socket on port '43003' ok 2 - creating async using timeout => 3 ok 3 - Added request, given id '1' ok 4 - got a response ok 5 - got faked up timeout response ok 6 - opened socket on port '43003' ok 7 - creating async using max_request_time => 3 ok 8 - Added request, given id '1' ok 9 - got a response ok 10 - got faked up timeout response ok t/headers.t ............... 1..3 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:46187/ ok 2 - Added request to the queue ok 3 - Got a response ok t/invalid-options.t ....... 1..2 ok 1 - new dies on invalid option. ok 2 - add_with_opts dies on invalid option. ok t/key_aliases.t ........... 1..4 ok 1 - created object ok 2 - got 0 ok 3 - created object ok 4 - got 3 ok t/local-addr.t ............ skipped: test requires Sys::HostIP to be installed t/make-url-absolute.t ..... 1..4 ok 1 - http://www.test.com:8080/foo/bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 2 - /foo/bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 3 - bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 4 - ?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok t/not-modified.t .......... 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:38687/ ok 2 - Added request to the queue ok 3 - 304 Not modified ok 4 - does not have a previous reponse ok t/peer-addr.t ............. 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:41275/ ok 2 - Added request to http://example.org:41275 to the queue with peer_addr set to 'localhost' ok 3 - Got a response ok 4 - Got expected response ok t/pod-coverage.t .......... 1..2 ok 1 - Pod coverage on HTTP::Async ok 2 - Pod coverage on HTTP::Async::Polite ok t/pod.t ................... 1..2 ok 1 - POD test for blib/lib/HTTP/Async.pm ok 2 - POD test for blib/lib/HTTP/Async/Polite.pm ok t/polite.t ................ 1..14 ok 1 - default interval is 5 seconds ok 2 - change interval to 3 seconds ok 3 - new interval is 3 seconds ok 4 - starting a test server # TestServer: You can connect to your server at http://localhost:39611/ ok 5 - starting a test server # TestServer: You can connect to your server at http://localhost:38411/ ok 6 - Add the requests ok 7 - Got correct to_send count ok 8 - Got correct total count ok 9 - got six responses back ok 10 - at least three seconds between requests to same domain ok 11 - at least three seconds between requests to same domain ok 12 - at least three seconds between requests to same domain ok 13 - at least three seconds between requests to same domain ok 14 - at most 1 second between first two requests ok t/poll-interval.t ......... 1..24 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:46631/ ok 2 - $q->poll_interval == 0.05 ok 3 - set poll_interval to 0.1 ok 4 - $q->poll_interval == 0.1 ok 5 - Added request to the queue - http://localhost:46631?delay=3 ok 6 - next_response returns at once ok 7 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 8 - wait_for_next_response(0) returns at once ok 9 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 10 - wait_for_next_response(1) returns after 1 sec without a response ok 11 - Returned after 1 sec delay (1.01 >= 1.00) ok 12 - Returned before 1.4 sec delay (1.01 < 1.40) ok 13 - wait_for_next_response got the response ok 14 - Returned after 3 sec delay (3.11 > 3.00) ok 15 - good response (200) ok 16 - is a success ok 17 - Added request to the queue - http://localhost:46631?delay=1 ok 18 - wait_for_next_response got the response ok 19 - Returned after 1 sec delay (1.00 > 1.00) ok 20 - Returned before 2 sec delay (1.00 < 2.00) ok 21 - good response (200) ok 22 - is a success ok 23 - Did not get a response ok 24 - Returned in less than 1 sec (0.00 < 1.00) ok t/proxy-with-https.t ...... skipped: enable these tests by setting REAL_SERVERS t/proxy.t ................. 1..16 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:36215/ ok 2 - starting a test server ok 3 - got http://localhost:36215 ok 4 - got http://localhost:42655 # TestServer: You can connect to your server at http://localhost:42655/ ok 5 - Added request to the queue - http://localhost:36215/foo/bar?redirect=2 ok 6 - Got a '200' response ok 7 - check for proxy header '' ok 8 - Added request to the queue - http://localhost:36215/foo/bar?delay=1 ok 9 - Got a '200' response ok 10 - check for proxy header '' ok 11 - Added request to the queue - http://localhost:36215/foo/bar?redirect=2 ok 12 - Got a '200' response ok 13 - check for proxy header 'yes' ok 14 - Added request to the queue - http://localhost:36215/foo/bar?delay=1 ok 15 - Got a '200' response ok 16 - check for proxy header 'yes' ok t/real-servers.t .......... skipped: enable these tests by setting REAL_SERVERS t/redirects.t ............. 1..21 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:34671/ ok 2 - max_redirect == 7 ok 3 - Added request to the queue ok 4 - No longer a redirect ok 5 - Has a previous reponse ok 6 - previous request was a redirect ok 7 - Added request to the queue ok 8 - Still a redirect ok 9 - Has a previous reponse ok 10 - previous request was a redirect ok 11 - last request url correct ok 12 - Set the max_redirect higher. ok 13 - Added request to the queue ok 14 - No longer a redirect ok 15 - Has a previous reponse ok 16 - previous request was a redirect ok 17 - Set the max_redirect to zero. ok 18 - max_redirect is set to zero. ok 19 - Added request to the queue ok 20 - No longer a redirect ok 21 - Have no previous reponse ok t/release-cpan-changes.t .. skipped: install Test::CPAN::Changes to run this test t/remove.t ................ 1..21 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:41415/ ok 2 - total_count starts at zero ok 3 - added fast / to_return item ok 4 - to_return_count is one ok 5 - added slow / in_progress item ok 6 - in_progress_count is one ok 7 - total_count is now two ok 8 - removed 'fast' item with id '1' ok 9 - removed 'slow' item with id '2' ok 10 - removal of bad id '123456' returns false ok 11 - total_count is now zero ok 12 - starting a test server # TestServer: You can connect to your server at http://localhost:41743/ ok 13 - total_count starts at zero ok 14 - added fast / to_return item ok 15 - to_return_count is one ok 16 - added slow / in_progress item ok 17 - in_progress_count is one ok 18 - total_count is now two ok 19 - removed all items ok 20 - remove_all() on empty queue returns false ok 21 - total_count is now zero ok t/setup.t ................. 1..16 ok 1 - set to 0 ok 2 - got 0 ok 3 - created object ok 4 - got 0 ok 5 - set to 3 ok 6 - got 3 ok 7 - created object ok 8 - got 3 ok 9 - set to 0 ok 10 - got 0 ok 11 - created object ok 12 - got 0 ok 13 - set to 3 ok 14 - got 3 ok 15 - created object ok 16 - got 3 ok t/strip-host-from-uri.t ... 1..5 ok 1 - correctly stripped https://www.w3.org:80/Protocols to /Protocols ok 2 - correctly stripped http://localhost:8080?delay=3 to /?delay=3 ok 3 - correctly stripped https://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 4 - correctly stripped http://www.w3.org:8080/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 5 - correctly stripped http://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok t/template.t .............. skipped: just a template to base other tests on t/timeout.t ............... 1..20 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:33479/ ok 2 - $q->timeout == 180 ok 3 - Added request to the queue - http://localhost:33479?delay=0 ok 4 - Not timed out (200) ok 5 - Set the timeout really low ok 6 - Added delayed request to the queue - http://localhost:33479?delay=3 ok 7 - timed out (504) ok 8 - is an error ok 9 - Added trickle request to the queue - http://localhost:33479?trickle=4 ok 10 - response ok (200) ok 11 - is not an error ok 12 - Set the timeout really low ok 13 - Set the max_request_time really low ok 14 - Added trickle request to the queue - http://localhost:33479?trickle=3 ok 15 - timed out (504) ok 16 - is an error ok 17 - Lengthen the timeout ok 18 - Lengthen the max_request_time ok 19 - Added delayed request to the queue - http://localhost:33479?delay=3 ok 20 - Not timed out (200) ok All tests successful. Files=26, Tests=184, 46 wallclock secs ( 0.11 usr 0.07 sys + 4.60 cusr 1.00 csys = 5.78 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libhttp-async-perl/ make -j12 install DESTDIR=/build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' Manifying 2 pod documents Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/perl5/HTTP/Async.pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/perl5/HTTP/Async/Polite.pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/man/man3/HTTP::Async::Polite.3pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/man/man3/HTTP::Async.3pm make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libhttp-async-perl' in '../libhttp-async-perl_0.33-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libhttp-async-perl_0.33-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libhttp-async-perl_0.33-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3801956 and its subdirectories I: Current time: Wed Dec 24 21:54:22 -12 2025 I: pbuilder-time-stamp: 1766656462 Thu Dec 25 09:54:22 UTC 2025 I: Signing ./b1/libhttp-async-perl_0.33-3_arm64.buildinfo as libhttp-async-perl_0.33-3_arm64.buildinfo.asc Thu Dec 25 09:54:22 UTC 2025 I: Signed ./b1/libhttp-async-perl_0.33-3_arm64.buildinfo as ./b1/libhttp-async-perl_0.33-3_arm64.buildinfo.asc Thu Dec 25 09:54:22 UTC 2025 - build #1 for libhttp-async-perl/unstable/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu Dec 25 09:54:22 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-qMZ8NlzX, removing. /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 03:31 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 03:30 b2 -rw-r--r-- 1 jenkins jenkins 2315 Oct 15 2022 libhttp-async-perl_0.33-3.dsc -rw------- 1 jenkins jenkins 3500 Nov 22 03:30 rbuildlog.3DyZCym /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1: total 100 -rw-r--r-- 1 jenkins jenkins 43914 Nov 22 03:31 build.log -rw-r--r-- 1 jenkins jenkins 3680 Nov 22 03:31 libhttp-async-perl_0.33-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2315 Nov 22 03:31 libhttp-async-perl_0.33-3.dsc -rw-r--r-- 1 jenkins jenkins 23156 Nov 22 03:31 libhttp-async-perl_0.33-3_all.deb -rw-r--r-- 1 jenkins jenkins 5918 Nov 22 03:31 libhttp-async-perl_0.33-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6800 Nov 22 03:31 libhttp-async-perl_0.33-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1181 Nov 22 03:31 libhttp-async-perl_0.33-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1332 Nov 22 03:31 libhttp-async-perl_0.33-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2: total 0 Fri Nov 22 03:31:23 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 24 21:53:07 -12 2025 I: pbuilder-time-stamp: 1766656387 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libhttp-async-perl_0.33-3.dsc] I: copying [./libhttp-async-perl_0.33.orig.tar.gz] I: copying [./libhttp-async-perl_0.33-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Oct 15 18:52:16 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libhttp-async-perl_0.33-3.dsc: no acceptable signature found dpkg-source: info: extracting libhttp-async-perl in libhttp-async-perl-0.33 dpkg-source: info: unpacking libhttp-async-perl_0.33.orig.tar.gz dpkg-source: info: unpacking libhttp-async-perl_0.33-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying no-network.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3801956/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='bb9839e1bd024f46b3356978732d001c' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3801956' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_XjN8 --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1 --logfile b1/build.log libhttp-async-perl_0.33-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3801956/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libnet-https-nb-perl, libtest-fatal-perl, libtest-http-server-simple-perl, libtest-pod-perl, libtest-pod-coverage-perl, libtest-tcp-perl, liburi-perl, libwww-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libnet-https-nb-perl; however: Package libnet-https-nb-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-fatal-perl; however: Package libtest-fatal-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-http-server-simple-perl; however: Package libtest-http-server-simple-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-tcp-perl; however: Package libtest-tcp-perl is not installed. pbuilder-satisfydepends-dummy depends on liburi-perl; however: Package liburi-perl is not installed. pbuilder-satisfydepends-dummy depends on libwww-perl; however: Package libwww-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcgi-pm-perl{a} libclone-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libencode-locale-perl{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libhttp-server-simple-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libnet-http-perl{a} libnet-https-nb-perl{a} libnet-ssleay-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-fatal-perl{a} libtest-http-server-simple-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtest-sharedfork-perl{a} libtest-tcp-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl lynx wget 0 packages upgraded, 66 newly installed, 0 to remove and 0 not upgraded. Need to get 22.9 MB of archives. After unpacking 86.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 netbase all 6.4 [12.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 openssl arm64 3.3.2-2 [1347 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 ca-certificates all 20240203 [158 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 33 http://deb.debian.org/debian unstable/main arm64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 liburi-perl all 5.30-1 [105 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libhtml-parser-perl arm64 3.83-1+b1 [97.5 kB] Get: 36 http://deb.debian.org/debian unstable/main arm64 libcgi-pm-perl all 4.66-1 [217 kB] Get: 37 http://deb.debian.org/debian unstable/main arm64 libclone-perl arm64 0.47-1+b1 [13.7 kB] Get: 38 http://deb.debian.org/debian unstable/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 39 http://deb.debian.org/debian unstable/main arm64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 40 http://deb.debian.org/debian unstable/main arm64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 41 http://deb.debian.org/debian unstable/main arm64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 42 http://deb.debian.org/debian unstable/main arm64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 43 http://deb.debian.org/debian unstable/main arm64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 44 http://deb.debian.org/debian unstable/main arm64 libio-html-perl all 1.004-3 [16.2 kB] Get: 45 http://deb.debian.org/debian unstable/main arm64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 46 http://deb.debian.org/debian unstable/main arm64 libhttp-message-perl all 7.00-2 [79.8 kB] Get: 47 http://deb.debian.org/debian unstable/main arm64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 48 http://deb.debian.org/debian unstable/main arm64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 49 http://deb.debian.org/debian unstable/main arm64 libhttp-server-simple-perl all 0.52-2 [29.4 kB] Get: 50 http://deb.debian.org/debian unstable/main arm64 perl-openssl-defaults arm64 7+b2 [6712 B] Get: 51 http://deb.debian.org/debian unstable/main arm64 libnet-ssleay-perl arm64 1.94-2 [323 kB] Get: 52 http://deb.debian.org/debian unstable/main arm64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get: 53 http://deb.debian.org/debian unstable/main arm64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 54 http://deb.debian.org/debian unstable/main arm64 libtry-tiny-perl all 0.32-1 [22.9 kB] Get: 55 http://deb.debian.org/debian unstable/main arm64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 56 http://deb.debian.org/debian unstable/main arm64 libwww-perl all 6.77-1 [183 kB] Get: 57 http://deb.debian.org/debian unstable/main arm64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 58 http://deb.debian.org/debian unstable/main arm64 libnet-https-nb-perl all 0.15-2 [9708 B] Get: 59 http://deb.debian.org/debian unstable/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 60 http://deb.debian.org/debian unstable/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 61 http://deb.debian.org/debian unstable/main arm64 libtest-fatal-perl all 0.017-1 [13.2 kB] Get: 62 http://deb.debian.org/debian unstable/main arm64 libtest-http-server-simple-perl all 0.11-2 [10.2 kB] Get: 63 http://deb.debian.org/debian unstable/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 64 http://deb.debian.org/debian unstable/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Get: 65 http://deb.debian.org/debian unstable/main arm64 libtest-sharedfork-perl all 0.35-3 [8484 B] Get: 66 http://deb.debian.org/debian unstable/main arm64 libtest-tcp-perl all 2.22-2 [22.9 kB] Fetched 22.9 MB in 0s (106 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_3.3.2-2_arm64.deb ... Unpacking openssl (3.3.2-2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../11-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../24-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../26-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../32-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../33-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libhtml-parser-perl:arm64. Preparing to unpack .../34-libhtml-parser-perl_3.83-1+b1_arm64.deb ... Unpacking libhtml-parser-perl:arm64 (3.83-1+b1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../35-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libclone-perl:arm64. Preparing to unpack .../36-libclone-perl_0.47-1+b1_arm64.deb ... Unpacking libclone-perl:arm64 (0.47-1+b1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../37-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../38-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../39-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../40-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../41-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../42-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../43-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../44-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../45-libhttp-message-perl_7.00-2_all.deb ... Unpacking libhttp-message-perl (7.00-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../46-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../47-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package libhttp-server-simple-perl. Preparing to unpack .../48-libhttp-server-simple-perl_0.52-2_all.deb ... Unpacking libhttp-server-simple-perl (0.52-2) ... Selecting previously unselected package perl-openssl-defaults:arm64. Preparing to unpack .../49-perl-openssl-defaults_7+b2_arm64.deb ... Unpacking perl-openssl-defaults:arm64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:arm64. Preparing to unpack .../50-libnet-ssleay-perl_1.94-2_arm64.deb ... Unpacking libnet-ssleay-perl:arm64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../51-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../52-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../53-libtry-tiny-perl_0.32-1_all.deb ... Unpacking libtry-tiny-perl (0.32-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../54-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../55-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libnet-https-nb-perl. Preparing to unpack .../57-libnet-https-nb-perl_0.15-2_all.deb ... Unpacking libnet-https-nb-perl (0.15-2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../58-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../59-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-fatal-perl. Preparing to unpack .../60-libtest-fatal-perl_0.017-1_all.deb ... Unpacking libtest-fatal-perl (0.017-1) ... Selecting previously unselected package libtest-http-server-simple-perl. Preparing to unpack .../61-libtest-http-server-simple-perl_0.11-2_all.deb ... Unpacking libtest-http-server-simple-perl (0.11-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../62-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../63-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Selecting previously unselected package libtest-sharedfork-perl. Preparing to unpack .../64-libtest-sharedfork-perl_0.35-3_all.deb ... Unpacking libtest-sharedfork-perl (0.35-3) ... Selecting previously unselected package libtest-tcp-perl. Preparing to unpack .../65-libtest-tcp-perl_2.22-2_all.deb ... Unpacking libtest-tcp-perl (2.22-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libclone-perl:arm64 (0.47-1+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.20) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up libtry-tiny-perl (0.32-1) ... Setting up libtest-fatal-perl (0.017-1) ... Setting up perl-openssl-defaults:arm64 (7+b2) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3+b1) ... Setting up libtest-sharedfork-perl (0.35-3) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libio-html-perl (1.004-3) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up openssl (3.3.2-2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:arm64 (1.94-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.22.5-2) ... Setting up libtest-tcp-perl (2.22-2) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libtool (2.4.7-8) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up libnet-http-perl (6.23-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:arm64 (3.83-1+b1) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libhttp-message-perl (7.00-2) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnet-https-nb-perl (0.15-2) ... Setting up libhttp-server-simple-perl (0.52-2) ... Setting up debhelper (13.20) ... Setting up libtest-http-server-simple-perl (0.11-2) ... Setting up libwww-perl (6.77-1) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libhttp-async-perl-0.33/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libhttp-async-perl_0.33-3_source.changes dpkg-buildpackage: info: source package libhttp-async-perl dpkg-buildpackage: info: source version 0.33-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libhttp-async-perl-0.33=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libhttp-async-perl-0.33=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for HTTP::Async Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' cp lib/HTTP/Async.pm blib/lib/HTTP/Async.pm cp lib/HTTP/Async/Polite.pm blib/lib/HTTP/Async/Polite.pm Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bad-connections.t ....... 1..5 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:42341/ ok 2 - Added request to the queue - http://localhost:42341/foo/bar?break_connection=before_content ok 3 - Got a '200' response ok 4 - Added request to the queue - http://localhost:42341/foo/bar?break_connection=before_headers ok 5 - Got a '504' response ok t/bad-headers.t ........... 1..3 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:43995/ ok 2 - Added request to the queue ok 3 - Got a response ok t/bad-hosts.t ............. skipped: enable these tests by setting REAL_SERVERS t/cookies.t ............... 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:33857/ ok 2 - Added request to the queue ok 3 - Got cookie in response 'x=test; path=/' ok 4 - Got cookie from cookie jar 'Set-Cookie3: x=test; path="/"; domain=localhost.local; path_spec; discard; version=0 # ' ok t/dead-connection.t ....... 1..10 ok 1 - opened socket on port '43003' ok 2 - creating async using timeout => 3 ok 3 - Added request, given id '1' ok 4 - got a response ok 5 - got faked up timeout response ok 6 - opened socket on port '43003' ok 7 - creating async using max_request_time => 3 ok 8 - Added request, given id '1' ok 9 - got a response ok 10 - got faked up timeout response ok t/headers.t ............... 1..3 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:46187/ ok 2 - Added request to the queue ok 3 - Got a response ok t/invalid-options.t ....... 1..2 ok 1 - new dies on invalid option. ok 2 - add_with_opts dies on invalid option. ok t/key_aliases.t ........... 1..4 ok 1 - created object ok 2 - got 0 ok 3 - created object ok 4 - got 3 ok t/local-addr.t ............ skipped: test requires Sys::HostIP to be installed t/make-url-absolute.t ..... 1..4 ok 1 - http://www.test.com:8080/foo/bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 2 - /foo/bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 3 - bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 4 - ?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok t/not-modified.t .......... 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:38687/ ok 2 - Added request to the queue ok 3 - 304 Not modified ok 4 - does not have a previous reponse ok t/peer-addr.t ............. 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:41275/ ok 2 - Added request to http://example.org:41275 to the queue with peer_addr set to 'localhost' ok 3 - Got a response ok 4 - Got expected response ok t/pod-coverage.t .......... 1..2 ok 1 - Pod coverage on HTTP::Async ok 2 - Pod coverage on HTTP::Async::Polite ok t/pod.t ................... 1..2 ok 1 - POD test for blib/lib/HTTP/Async.pm ok 2 - POD test for blib/lib/HTTP/Async/Polite.pm ok t/polite.t ................ 1..14 ok 1 - default interval is 5 seconds ok 2 - change interval to 3 seconds ok 3 - new interval is 3 seconds ok 4 - starting a test server # TestServer: You can connect to your server at http://localhost:39611/ ok 5 - starting a test server # TestServer: You can connect to your server at http://localhost:38411/ ok 6 - Add the requests ok 7 - Got correct to_send count ok 8 - Got correct total count ok 9 - got six responses back ok 10 - at least three seconds between requests to same domain ok 11 - at least three seconds between requests to same domain ok 12 - at least three seconds between requests to same domain ok 13 - at least three seconds between requests to same domain ok 14 - at most 1 second between first two requests ok t/poll-interval.t ......... 1..24 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:46631/ ok 2 - $q->poll_interval == 0.05 ok 3 - set poll_interval to 0.1 ok 4 - $q->poll_interval == 0.1 ok 5 - Added request to the queue - http://localhost:46631?delay=3 ok 6 - next_response returns at once ok 7 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 8 - wait_for_next_response(0) returns at once ok 9 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 10 - wait_for_next_response(1) returns after 1 sec without a response ok 11 - Returned after 1 sec delay (1.01 >= 1.00) ok 12 - Returned before 1.4 sec delay (1.01 < 1.40) ok 13 - wait_for_next_response got the response ok 14 - Returned after 3 sec delay (3.11 > 3.00) ok 15 - good response (200) ok 16 - is a success ok 17 - Added request to the queue - http://localhost:46631?delay=1 ok 18 - wait_for_next_response got the response ok 19 - Returned after 1 sec delay (1.00 > 1.00) ok 20 - Returned before 2 sec delay (1.00 < 2.00) ok 21 - good response (200) ok 22 - is a success ok 23 - Did not get a response ok 24 - Returned in less than 1 sec (0.00 < 1.00) ok t/proxy-with-https.t ...... skipped: enable these tests by setting REAL_SERVERS t/proxy.t ................. 1..16 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:36215/ ok 2 - starting a test server ok 3 - got http://localhost:36215 ok 4 - got http://localhost:42655 # TestServer: You can connect to your server at http://localhost:42655/ ok 5 - Added request to the queue - http://localhost:36215/foo/bar?redirect=2 ok 6 - Got a '200' response ok 7 - check for proxy header '' ok 8 - Added request to the queue - http://localhost:36215/foo/bar?delay=1 ok 9 - Got a '200' response ok 10 - check for proxy header '' ok 11 - Added request to the queue - http://localhost:36215/foo/bar?redirect=2 ok 12 - Got a '200' response ok 13 - check for proxy header 'yes' ok 14 - Added request to the queue - http://localhost:36215/foo/bar?delay=1 ok 15 - Got a '200' response ok 16 - check for proxy header 'yes' ok t/real-servers.t .......... skipped: enable these tests by setting REAL_SERVERS t/redirects.t ............. 1..21 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:34671/ ok 2 - max_redirect == 7 ok 3 - Added request to the queue ok 4 - No longer a redirect ok 5 - Has a previous reponse ok 6 - previous request was a redirect ok 7 - Added request to the queue ok 8 - Still a redirect ok 9 - Has a previous reponse ok 10 - previous request was a redirect ok 11 - last request url correct ok 12 - Set the max_redirect higher. ok 13 - Added request to the queue ok 14 - No longer a redirect ok 15 - Has a previous reponse ok 16 - previous request was a redirect ok 17 - Set the max_redirect to zero. ok 18 - max_redirect is set to zero. ok 19 - Added request to the queue ok 20 - No longer a redirect ok 21 - Have no previous reponse ok t/release-cpan-changes.t .. skipped: install Test::CPAN::Changes to run this test t/remove.t ................ 1..21 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:41415/ ok 2 - total_count starts at zero ok 3 - added fast / to_return item ok 4 - to_return_count is one ok 5 - added slow / in_progress item ok 6 - in_progress_count is one ok 7 - total_count is now two ok 8 - removed 'fast' item with id '1' ok 9 - removed 'slow' item with id '2' ok 10 - removal of bad id '123456' returns false ok 11 - total_count is now zero ok 12 - starting a test server # TestServer: You can connect to your server at http://localhost:41743/ ok 13 - total_count starts at zero ok 14 - added fast / to_return item ok 15 - to_return_count is one ok 16 - added slow / in_progress item ok 17 - in_progress_count is one ok 18 - total_count is now two ok 19 - removed all items ok 20 - remove_all() on empty queue returns false ok 21 - total_count is now zero ok t/setup.t ................. 1..16 ok 1 - set to 0 ok 2 - got 0 ok 3 - created object ok 4 - got 0 ok 5 - set to 3 ok 6 - got 3 ok 7 - created object ok 8 - got 3 ok 9 - set to 0 ok 10 - got 0 ok 11 - created object ok 12 - got 0 ok 13 - set to 3 ok 14 - got 3 ok 15 - created object ok 16 - got 3 ok t/strip-host-from-uri.t ... 1..5 ok 1 - correctly stripped https://www.w3.org:80/Protocols to /Protocols ok 2 - correctly stripped http://localhost:8080?delay=3 to /?delay=3 ok 3 - correctly stripped https://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 4 - correctly stripped http://www.w3.org:8080/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 5 - correctly stripped http://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok t/template.t .............. skipped: just a template to base other tests on t/timeout.t ............... 1..20 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:33479/ ok 2 - $q->timeout == 180 ok 3 - Added request to the queue - http://localhost:33479?delay=0 ok 4 - Not timed out (200) ok 5 - Set the timeout really low ok 6 - Added delayed request to the queue - http://localhost:33479?delay=3 ok 7 - timed out (504) ok 8 - is an error ok 9 - Added trickle request to the queue - http://localhost:33479?trickle=4 ok 10 - response ok (200) ok 11 - is not an error ok 12 - Set the timeout really low ok 13 - Set the max_request_time really low ok 14 - Added trickle request to the queue - http://localhost:33479?trickle=3 ok 15 - timed out (504) ok 16 - is an error ok 17 - Lengthen the timeout ok 18 - Lengthen the max_request_time ok 19 - Added delayed request to the queue - http://localhost:33479?delay=3 ok 20 - Not timed out (200) ok All tests successful. Files=26, Tests=184, 46 wallclock secs ( 0.11 usr 0.07 sys + 4.60 cusr 1.00 csys = 5.78 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libhttp-async-perl/ make -j12 install DESTDIR=/build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' Manifying 2 pod documents Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/perl5/HTTP/Async.pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/perl5/HTTP/Async/Polite.pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/man/man3/HTTP::Async::Polite.3pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/man/man3/HTTP::Async.3pm make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libhttp-async-perl' in '../libhttp-async-perl_0.33-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libhttp-async-perl_0.33-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libhttp-async-perl_0.33-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3801956 and its subdirectories I: Current time: Wed Dec 24 21:54:22 -12 2025 I: pbuilder-time-stamp: 1766656462 Fri Nov 22 03:31:24 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink04-arm64.debian.net. Fri Nov 22 03:31:24 UTC 2024 I: Preparing to do remote build '2' on codethink04-arm64.debian.net. Fri Nov 22 03:31:24 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Nov 22 03:31:24 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-YxJ6lY' ==================================================================================== Fri Nov 22 03:31:25 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "2 libhttp-async-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj 0.33-3" as arguments. Fri Nov 22 03:31:25 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-awGKHKcG" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 03:31:26 UTC 2024 I: Downloading source for unstable/libhttp-async-perl=0.33-3 Reading package lists... NOTICE: 'libhttp-async-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (dsc) [2315 B] Get:2 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (tar) [24.4 kB] Get:3 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (diff) [3680 B] Fetched 30.4 kB in 0s (1829 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libhttp-async-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libhttp-async-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (dsc) [2315 B] Get:2 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (tar) [24.4 kB] Get:3 http://deb.debian.org/debian unstable/main libhttp-async-perl 0.33-3 (diff) [3680 B] Fetched 30.4 kB in 0s (1829 kB/s) Download complete and in download only mode ============================================================================= Re-Building libhttp-async-perl in unstable on arm64 on codethink04-arm64 now. Date: Fri Nov 22 03:31:26 GMT 2024 Date UTC: Fri Nov 22 03:31:26 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_Wvzk + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libhttp-async-perl = debian-installer -o libhttp-async-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libhttp-async-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_Wvzk --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2 --logfile b2/build.log libhttp-async-perl_0.33-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Nov 22 17:31:26 +14 2024 I: pbuilder-time-stamp: 1732246286 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libhttp-async-perl_0.33-3.dsc] I: copying [./libhttp-async-perl_0.33.orig.tar.gz] I: copying [./libhttp-async-perl_0.33-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Oct 15 18:52:16 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libhttp-async-perl_0.33-3.dsc: no acceptable signature found dpkg-source: info: extracting libhttp-async-perl in libhttp-async-perl-0.33 dpkg-source: info: unpacking libhttp-async-perl_0.33.orig.tar.gz dpkg-source: info: unpacking libhttp-async-perl_0.33-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying no-network.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D01_modify_environment starting debug: Running on codethink04-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 22 03:31 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=65e69df56bb44ad59ea3d9b3dfb532e5 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2673281 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_Wvzk --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2 --logfile b2/build.log libhttp-async-perl_0.33-3.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libnet-https-nb-perl, libtest-fatal-perl, libtest-http-server-simple-perl, libtest-pod-perl, libtest-pod-coverage-perl, libtest-tcp-perl, liburi-perl, libwww-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libnet-https-nb-perl; however: Package libnet-https-nb-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-fatal-perl; however: Package libtest-fatal-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-http-server-simple-perl; however: Package libtest-http-server-simple-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-tcp-perl; however: Package libtest-tcp-perl is not installed. pbuilder-satisfydepends-dummy depends on liburi-perl; however: Package liburi-perl is not installed. pbuilder-satisfydepends-dummy depends on libwww-perl; however: Package libwww-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcgi-pm-perl{a} libclone-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libencode-locale-perl{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libhttp-server-simple-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libnet-http-perl{a} libnet-https-nb-perl{a} libnet-ssleay-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-fatal-perl{a} libtest-http-server-simple-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtest-sharedfork-perl{a} libtest-tcp-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl lynx wget 0 packages upgraded, 66 newly installed, 0 to remove and 0 not upgraded. Need to get 22.9 MB of archives. After unpacking 86.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 netbase all 6.4 [12.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 openssl arm64 3.3.2-2 [1347 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 ca-certificates all 20240203 [158 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 33 http://deb.debian.org/debian unstable/main arm64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 liburi-perl all 5.30-1 [105 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libhtml-parser-perl arm64 3.83-1+b1 [97.5 kB] Get: 36 http://deb.debian.org/debian unstable/main arm64 libcgi-pm-perl all 4.66-1 [217 kB] Get: 37 http://deb.debian.org/debian unstable/main arm64 libclone-perl arm64 0.47-1+b1 [13.7 kB] Get: 38 http://deb.debian.org/debian unstable/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 39 http://deb.debian.org/debian unstable/main arm64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 40 http://deb.debian.org/debian unstable/main arm64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 41 http://deb.debian.org/debian unstable/main arm64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 42 http://deb.debian.org/debian unstable/main arm64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 43 http://deb.debian.org/debian unstable/main arm64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 44 http://deb.debian.org/debian unstable/main arm64 libio-html-perl all 1.004-3 [16.2 kB] Get: 45 http://deb.debian.org/debian unstable/main arm64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 46 http://deb.debian.org/debian unstable/main arm64 libhttp-message-perl all 7.00-2 [79.8 kB] Get: 47 http://deb.debian.org/debian unstable/main arm64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 48 http://deb.debian.org/debian unstable/main arm64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 49 http://deb.debian.org/debian unstable/main arm64 libhttp-server-simple-perl all 0.52-2 [29.4 kB] Get: 50 http://deb.debian.org/debian unstable/main arm64 perl-openssl-defaults arm64 7+b2 [6712 B] Get: 51 http://deb.debian.org/debian unstable/main arm64 libnet-ssleay-perl arm64 1.94-2 [323 kB] Get: 52 http://deb.debian.org/debian unstable/main arm64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get: 53 http://deb.debian.org/debian unstable/main arm64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 54 http://deb.debian.org/debian unstable/main arm64 libtry-tiny-perl all 0.32-1 [22.9 kB] Get: 55 http://deb.debian.org/debian unstable/main arm64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 56 http://deb.debian.org/debian unstable/main arm64 libwww-perl all 6.77-1 [183 kB] Get: 57 http://deb.debian.org/debian unstable/main arm64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 58 http://deb.debian.org/debian unstable/main arm64 libnet-https-nb-perl all 0.15-2 [9708 B] Get: 59 http://deb.debian.org/debian unstable/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 60 http://deb.debian.org/debian unstable/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 61 http://deb.debian.org/debian unstable/main arm64 libtest-fatal-perl all 0.017-1 [13.2 kB] Get: 62 http://deb.debian.org/debian unstable/main arm64 libtest-http-server-simple-perl all 0.11-2 [10.2 kB] Get: 63 http://deb.debian.org/debian unstable/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 64 http://deb.debian.org/debian unstable/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Get: 65 http://deb.debian.org/debian unstable/main arm64 libtest-sharedfork-perl all 0.35-3 [8484 B] Get: 66 http://deb.debian.org/debian unstable/main arm64 libtest-tcp-perl all 2.22-2 [22.9 kB] Fetched 22.9 MB in 0s (145 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_3.3.2-2_arm64.deb ... Unpacking openssl (3.3.2-2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../11-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../24-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../26-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../32-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../33-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libhtml-parser-perl:arm64. Preparing to unpack .../34-libhtml-parser-perl_3.83-1+b1_arm64.deb ... Unpacking libhtml-parser-perl:arm64 (3.83-1+b1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../35-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libclone-perl:arm64. Preparing to unpack .../36-libclone-perl_0.47-1+b1_arm64.deb ... Unpacking libclone-perl:arm64 (0.47-1+b1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../37-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../38-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../39-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../40-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../41-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../42-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../43-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../44-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../45-libhttp-message-perl_7.00-2_all.deb ... Unpacking libhttp-message-perl (7.00-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../46-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../47-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package libhttp-server-simple-perl. Preparing to unpack .../48-libhttp-server-simple-perl_0.52-2_all.deb ... Unpacking libhttp-server-simple-perl (0.52-2) ... Selecting previously unselected package perl-openssl-defaults:arm64. Preparing to unpack .../49-perl-openssl-defaults_7+b2_arm64.deb ... Unpacking perl-openssl-defaults:arm64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:arm64. Preparing to unpack .../50-libnet-ssleay-perl_1.94-2_arm64.deb ... Unpacking libnet-ssleay-perl:arm64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../51-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../52-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../53-libtry-tiny-perl_0.32-1_all.deb ... Unpacking libtry-tiny-perl (0.32-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../54-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../55-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libnet-https-nb-perl. Preparing to unpack .../57-libnet-https-nb-perl_0.15-2_all.deb ... Unpacking libnet-https-nb-perl (0.15-2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../58-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../59-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-fatal-perl. Preparing to unpack .../60-libtest-fatal-perl_0.017-1_all.deb ... Unpacking libtest-fatal-perl (0.017-1) ... Selecting previously unselected package libtest-http-server-simple-perl. Preparing to unpack .../61-libtest-http-server-simple-perl_0.11-2_all.deb ... Unpacking libtest-http-server-simple-perl (0.11-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../62-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../63-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Selecting previously unselected package libtest-sharedfork-perl. Preparing to unpack .../64-libtest-sharedfork-perl_0.35-3_all.deb ... Unpacking libtest-sharedfork-perl (0.35-3) ... Selecting previously unselected package libtest-tcp-perl. Preparing to unpack .../65-libtest-tcp-perl_2.22-2_all.deb ... Unpacking libtest-tcp-perl (2.22-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libclone-perl:arm64 (0.47-1+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.20) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up libtry-tiny-perl (0.32-1) ... Setting up libtest-fatal-perl (0.017-1) ... Setting up perl-openssl-defaults:arm64 (7+b2) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3+b1) ... Setting up libtest-sharedfork-perl (0.35-3) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libio-html-perl (1.004-3) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up openssl (3.3.2-2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:arm64 (1.94-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.22.5-2) ... Setting up libtest-tcp-perl (2.22-2) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libtool (2.4.7-8) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up libnet-http-perl (6.23-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:arm64 (3.83-1+b1) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libhttp-message-perl (7.00-2) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnet-https-nb-perl (0.15-2) ... Setting up libhttp-server-simple-perl (0.52-2) ... Setting up debhelper (13.20) ... Setting up libtest-http-server-simple-perl (0.11-2) ... Setting up libwww-perl (6.77-1) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libhttp-async-perl-0.33/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libhttp-async-perl_0.33-3_source.changes dpkg-buildpackage: info: source package libhttp-async-perl dpkg-buildpackage: info: source version 0.33-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libhttp-async-perl-0.33=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libhttp-async-perl-0.33=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for HTTP::Async Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' cp lib/HTTP/Async/Polite.pm blib/lib/HTTP/Async/Polite.pm cp lib/HTTP/Async.pm blib/lib/HTTP/Async.pm Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bad-connections.t ....... 1..5 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:37985/ ok 2 - Added request to the queue - http://localhost:37985/foo/bar?break_connection=before_content ok 3 - Got a '200' response ok 4 - Added request to the queue - http://localhost:37985/foo/bar?break_connection=before_headers ok 5 - Got a '504' response ok t/bad-headers.t ........... 1..3 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:37901/ ok 2 - Added request to the queue ok 3 - Got a response ok t/bad-hosts.t ............. skipped: enable these tests by setting REAL_SERVERS t/cookies.t ............... 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:35565/ ok 2 - Added request to the queue ok 3 - Got cookie in response 'x=test; path=/' ok 4 - Got cookie from cookie jar 'Set-Cookie3: x=test; path="/"; domain=localhost.local; path_spec; discard; version=0 # ' ok t/dead-connection.t ....... 1..10 ok 1 - opened socket on port '44849' ok 2 - creating async using timeout => 3 ok 3 - Added request, given id '1' ok 4 - got a response ok 5 - got faked up timeout response ok 6 - opened socket on port '44849' ok 7 - creating async using max_request_time => 3 ok 8 - Added request, given id '1' ok 9 - got a response ok 10 - got faked up timeout response ok t/headers.t ............... 1..3 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:39437/ ok 2 - Added request to the queue ok 3 - Got a response ok t/invalid-options.t ....... 1..2 ok 1 - new dies on invalid option. ok 2 - add_with_opts dies on invalid option. ok t/key_aliases.t ........... 1..4 ok 1 - created object ok 2 - got 0 ok 3 - created object ok 4 - got 3 ok t/local-addr.t ............ skipped: test requires Sys::HostIP to be installed t/make-url-absolute.t ..... 1..4 ok 1 - http://www.test.com:8080/foo/bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 2 - /foo/bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 3 - bar?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok 4 - ?baz=bundy -> http://www.test.com:8080/foo/bar?baz=bundy ok t/not-modified.t .......... 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:38091/ ok 2 - Added request to the queue ok 3 - 304 Not modified ok 4 - does not have a previous reponse ok t/peer-addr.t ............. 1..4 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:36717/ ok 2 - Added request to http://example.org:36717 to the queue with peer_addr set to 'localhost' ok 3 - Got a response ok 4 - Got expected response ok t/pod-coverage.t .......... 1..2 ok 1 - Pod coverage on HTTP::Async ok 2 - Pod coverage on HTTP::Async::Polite ok t/pod.t ................... 1..2 ok 1 - POD test for blib/lib/HTTP/Async.pm ok 2 - POD test for blib/lib/HTTP/Async/Polite.pm ok t/polite.t ................ 1..14 ok 1 - default interval is 5 seconds ok 2 - change interval to 3 seconds ok 3 - new interval is 3 seconds ok 4 - starting a test server # TestServer: You can connect to your server at http://localhost:40275/ ok 5 - starting a test server # TestServer: You can connect to your server at http://localhost:45301/ ok 6 - Add the requests ok 7 - Got correct to_send count ok 8 - Got correct total count ok 9 - got six responses back ok 10 - at least three seconds between requests to same domain ok 11 - at least three seconds between requests to same domain ok 12 - at least three seconds between requests to same domain ok 13 - at least three seconds between requests to same domain ok 14 - at most 1 second between first two requests ok t/poll-interval.t ......... 1..24 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:44345/ ok 2 - $q->poll_interval == 0.05 ok 3 - set poll_interval to 0.1 ok 4 - $q->poll_interval == 0.1 ok 5 - Added request to the queue - http://localhost:44345?delay=3 ok 6 - next_response returns at once ok 7 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 8 - wait_for_next_response(0) returns at once ok 9 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 10 - wait_for_next_response(1) returns after 1 sec without a response ok 11 - Returned after 1 sec delay (1.02 >= 1.00) ok 12 - Returned before 1.4 sec delay (1.02 < 1.40) ok 13 - wait_for_next_response got the response ok 14 - Returned after 3 sec delay (3.12 > 3.00) ok 15 - good response (200) ok 16 - is a success ok 17 - Added request to the queue - http://localhost:44345?delay=1 ok 18 - wait_for_next_response got the response ok 19 - Returned after 1 sec delay (1.00 > 1.00) ok 20 - Returned before 2 sec delay (1.01 < 2.00) ok 21 - good response (200) ok 22 - is a success ok 23 - Did not get a response ok 24 - Returned in less than 1 sec (0.00 < 1.00) ok t/proxy-with-https.t ...... skipped: enable these tests by setting REAL_SERVERS t/proxy.t ................. 1..16 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:42351/ ok 2 - starting a test server ok 3 - got http://localhost:42351 ok 4 - got http://localhost:38623 # TestServer: You can connect to your server at http://localhost:38623/ ok 5 - Added request to the queue - http://localhost:42351/foo/bar?redirect=2 ok 6 - Got a '200' response ok 7 - check for proxy header '' ok 8 - Added request to the queue - http://localhost:42351/foo/bar?delay=1 ok 9 - Got a '200' response ok 10 - check for proxy header '' ok 11 - Added request to the queue - http://localhost:42351/foo/bar?redirect=2 ok 12 - Got a '200' response ok 13 - check for proxy header 'yes' ok 14 - Added request to the queue - http://localhost:42351/foo/bar?delay=1 ok 15 - Got a '200' response ok 16 - check for proxy header 'yes' ok t/real-servers.t .......... skipped: enable these tests by setting REAL_SERVERS t/redirects.t ............. 1..21 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:37209/ ok 2 - max_redirect == 7 ok 3 - Added request to the queue ok 4 - No longer a redirect ok 5 - Has a previous reponse ok 6 - previous request was a redirect ok 7 - Added request to the queue ok 8 - Still a redirect ok 9 - Has a previous reponse ok 10 - previous request was a redirect ok 11 - last request url correct ok 12 - Set the max_redirect higher. ok 13 - Added request to the queue ok 14 - No longer a redirect ok 15 - Has a previous reponse ok 16 - previous request was a redirect ok 17 - Set the max_redirect to zero. ok 18 - max_redirect is set to zero. ok 19 - Added request to the queue ok 20 - No longer a redirect ok 21 - Have no previous reponse ok t/release-cpan-changes.t .. skipped: install Test::CPAN::Changes to run this test t/remove.t ................ 1..21 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:38549/ ok 2 - total_count starts at zero ok 3 - added fast / to_return item ok 4 - to_return_count is one ok 5 - added slow / in_progress item ok 6 - in_progress_count is one ok 7 - total_count is now two ok 8 - removed 'fast' item with id '1' ok 9 - removed 'slow' item with id '2' ok 10 - removal of bad id '123456' returns false ok 11 - total_count is now zero ok 12 - starting a test server # TestServer: You can connect to your server at http://localhost:38207/ ok 13 - total_count starts at zero ok 14 - added fast / to_return item ok 15 - to_return_count is one ok 16 - added slow / in_progress item ok 17 - in_progress_count is one ok 18 - total_count is now two ok 19 - removed all items ok 20 - remove_all() on empty queue returns false ok 21 - total_count is now zero ok t/setup.t ................. 1..16 ok 1 - set to 0 ok 2 - got 0 ok 3 - created object ok 4 - got 0 ok 5 - set to 3 ok 6 - got 3 ok 7 - created object ok 8 - got 3 ok 9 - set to 0 ok 10 - got 0 ok 11 - created object ok 12 - got 0 ok 13 - set to 3 ok 14 - got 3 ok 15 - created object ok 16 - got 3 ok t/strip-host-from-uri.t ... 1..5 ok 1 - correctly stripped https://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 2 - correctly stripped http://localhost:8080?delay=3 to /?delay=3 ok 3 - correctly stripped http://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 4 - correctly stripped https://www.w3.org:80/Protocols to /Protocols ok 5 - correctly stripped http://www.w3.org:8080/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok t/template.t .............. skipped: just a template to base other tests on t/timeout.t ............... 1..20 ok 1 - starting a test server # TestServer: You can connect to your server at http://localhost:46835/ ok 2 - $q->timeout == 180 ok 3 - Added request to the queue - http://localhost:46835?delay=0 ok 4 - Not timed out (200) ok 5 - Set the timeout really low ok 6 - Added delayed request to the queue - http://localhost:46835?delay=3 ok 7 - timed out (504) ok 8 - is an error ok 9 - Added trickle request to the queue - http://localhost:46835?trickle=4 ok 10 - response ok (200) ok 11 - is not an error ok 12 - Set the timeout really low ok 13 - Set the max_request_time really low ok 14 - Added trickle request to the queue - http://localhost:46835?trickle=3 ok 15 - timed out (504) ok 16 - is an error ok 17 - Lengthen the timeout ok 18 - Lengthen the max_request_time ok 19 - Added delayed request to the queue - http://localhost:46835?delay=3 ok 20 - Not timed out (200) ok All tests successful. Files=26, Tests=184, 46 wallclock secs ( 0.14 usr 0.06 sys + 4.40 cusr 0.96 csys = 5.56 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libhttp-async-perl/ make -j12 install DESTDIR=/build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' Manifying 2 pod documents Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/perl5/HTTP/Async.pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/perl5/HTTP/Async/Polite.pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/man/man3/HTTP::Async::Polite.3pm Installing /build/reproducible-path/libhttp-async-perl-0.33/debian/libhttp-async-perl/usr/share/man/man3/HTTP::Async.3pm make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libhttp-async-perl' in '../libhttp-async-perl_0.33-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libhttp-async-perl_0.33-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libhttp-async-perl_0.33-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2673281 and its subdirectories I: Current time: Fri Nov 22 17:32:47 +14 2024 I: pbuilder-time-stamp: 1732246367 + false + set +x Fri Nov 22 03:32:47 UTC 2024 I: Signing ./b2/libhttp-async-perl_0.33-3_arm64.buildinfo as libhttp-async-perl_0.33-3_arm64.buildinfo.asc Fri Nov 22 03:32:47 UTC 2024 I: Signed ./b2/libhttp-async-perl_0.33-3_arm64.buildinfo as ./b2/libhttp-async-perl_0.33-3_arm64.buildinfo.asc Fri Nov 22 03:32:47 UTC 2024 - build #2 for libhttp-async-perl/unstable/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Fri Nov 22 03:32:47 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-awGKHKcG, removing. /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj: total 60 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 03:31 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 03:32 b2 -rw-r--r-- 1 jenkins jenkins 2315 Oct 15 2022 libhttp-async-perl_0.33-3.dsc -rw------- 1 jenkins jenkins 47715 Nov 22 03:31 rbuildlog.3DyZCym /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1: total 100 -rw-r--r-- 1 jenkins jenkins 43914 Nov 22 03:31 build.log -rw-r--r-- 1 jenkins jenkins 3680 Nov 22 03:31 libhttp-async-perl_0.33-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2315 Nov 22 03:31 libhttp-async-perl_0.33-3.dsc -rw-r--r-- 1 jenkins jenkins 23156 Nov 22 03:31 libhttp-async-perl_0.33-3_all.deb -rw-r--r-- 1 jenkins jenkins 5918 Nov 22 03:31 libhttp-async-perl_0.33-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6800 Nov 22 03:31 libhttp-async-perl_0.33-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1181 Nov 22 03:31 libhttp-async-perl_0.33-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1332 Nov 22 03:31 libhttp-async-perl_0.33-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2: total 104 -rw-r--r-- 1 jenkins jenkins 45859 Nov 22 03:32 build.log -rw-r--r-- 1 jenkins jenkins 3680 Nov 22 03:32 libhttp-async-perl_0.33-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2315 Nov 22 03:32 libhttp-async-perl_0.33-3.dsc -rw-r--r-- 1 jenkins jenkins 23156 Nov 22 03:32 libhttp-async-perl_0.33-3_all.deb -rw-r--r-- 1 jenkins jenkins 5918 Nov 22 03:32 libhttp-async-perl_0.33-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6800 Nov 22 03:32 libhttp-async-perl_0.33-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1181 Nov 22 03:32 libhttp-async-perl_0.33-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1332 Nov 22 03:32 libhttp-async-perl_0.33-3_source.changes Fri Nov 22 03:32:48 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. Fri Nov 22 03:32:49 UTC 2024 I: libhttp-async-perl_0.33-3_arm64.changes: Format: 1.8 Date: Sat, 15 Oct 2022 19:50:57 +0100 Source: libhttp-async-perl Binary: libhttp-async-perl Architecture: all Version: 0.33-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libhttp-async-perl - module for parallel non-blocking processing of multiple HTTP requ Changes: libhttp-async-perl (0.33-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libhttp-async-perl: Add Multi-Arch: foreign. Checksums-Sha1: 20f4ce32026f6f1d7d557c9e04b807f37cbd7191 23156 libhttp-async-perl_0.33-3_all.deb d9c48d306a6d3d51ac76874f682ee977c9b98030 5918 libhttp-async-perl_0.33-3_arm64.buildinfo Checksums-Sha256: 2f5a501bd63d490fc44db6bdd1d1228c3690fca905326a24b77ffbb8d4b8b62f 23156 libhttp-async-perl_0.33-3_all.deb d0d7cf872dd1289546493e519cd7c69c34eee2c425a0ff9a57ded9a817621742 5918 libhttp-async-perl_0.33-3_arm64.buildinfo Files: 31546312046da03d4669499dddda7e0c 23156 perl optional libhttp-async-perl_0.33-3_all.deb ed64b8256fa236d223100f35c2f21df7 5918 perl optional libhttp-async-perl_0.33-3_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libhttp-async-perl_0.33-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libhttp-async-perl_0.33-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libhttp-async-perl_0.33-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libhttp-async-perl_0.33-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/arm64/libhttp-async-perl_0.33-3_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libhttp-async-perl_0.33-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-22 03:31:23.321024011 +0000 +++ b2/build.log 2024-11-22 03:32:48.253188148 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Wed Dec 24 21:53:07 -12 2025 -I: pbuilder-time-stamp: 1766656387 +I: Current time: Fri Nov 22 17:31:26 +14 2024 +I: pbuilder-time-stamp: 1732246286 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -27,52 +27,84 @@ dpkg-source: info: applying no-network.patch I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3801956/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D01_modify_environment starting +debug: Running on codethink04-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 22 03:31 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='bb9839e1bd024f46b3356978732d001c' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3801956' - PS1='# ' - PS2='> ' + INVOCATION_ID=65e69df56bb44ad59ea3d9b3dfb532e5 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2673281 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_XjN8 --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1 --logfile b1/build.log libhttp-async-perl_0.33-3.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/pbuilderrc_Wvzk --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2 --logfile b2/build.log libhttp-async-perl_0.33-3.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink03-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3801956/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -190,7 +222,7 @@ Get: 64 http://deb.debian.org/debian unstable/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Get: 65 http://deb.debian.org/debian unstable/main arm64 libtest-sharedfork-perl all 0.35-3 [8484 B] Get: 66 http://deb.debian.org/debian unstable/main arm64 libtest-tcp-perl all 2.22-2 [22.9 kB] -Fetched 22.9 MB in 0s (106 MB/s) +Fetched 22.9 MB in 0s (145 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) @@ -483,7 +515,11 @@ fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libhttp-async-perl-0.33/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libhttp-async-perl_0.33-3_source.changes +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libhttp-async-perl-0.33/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libhttp-async-perl_0.33-3_source.changes dpkg-buildpackage: info: source package libhttp-async-perl dpkg-buildpackage: info: source version 0.33-3 dpkg-buildpackage: info: source distribution unstable @@ -507,8 +543,8 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libhttp-async-perl-0.33' -cp lib/HTTP/Async.pm blib/lib/HTTP/Async.pm cp lib/HTTP/Async/Polite.pm blib/lib/HTTP/Async/Polite.pm +cp lib/HTTP/Async.pm blib/lib/HTTP/Async.pm Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' dh_auto_test @@ -518,16 +554,16 @@ t/bad-connections.t ....... 1..5 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:42341/ -ok 2 - Added request to the queue - http://localhost:42341/foo/bar?break_connection=before_content +# TestServer: You can connect to your server at http://localhost:37985/ +ok 2 - Added request to the queue - http://localhost:37985/foo/bar?break_connection=before_content ok 3 - Got a '200' response -ok 4 - Added request to the queue - http://localhost:42341/foo/bar?break_connection=before_headers +ok 4 - Added request to the queue - http://localhost:37985/foo/bar?break_connection=before_headers ok 5 - Got a '504' response ok t/bad-headers.t ........... 1..3 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:43995/ +# TestServer: You can connect to your server at http://localhost:37901/ ok 2 - Added request to the queue ok 3 - Got a response ok @@ -535,7 +571,7 @@ t/cookies.t ............... 1..4 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:33857/ +# TestServer: You can connect to your server at http://localhost:35565/ ok 2 - Added request to the queue ok 3 - Got cookie in response 'x=test; path=/' ok 4 - Got cookie from cookie jar 'Set-Cookie3: x=test; path="/"; domain=localhost.local; path_spec; discard; version=0 @@ -543,12 +579,12 @@ ok t/dead-connection.t ....... 1..10 -ok 1 - opened socket on port '43003' +ok 1 - opened socket on port '44849' ok 2 - creating async using timeout => 3 ok 3 - Added request, given id '1' ok 4 - got a response ok 5 - got faked up timeout response -ok 6 - opened socket on port '43003' +ok 6 - opened socket on port '44849' ok 7 - creating async using max_request_time => 3 ok 8 - Added request, given id '1' ok 9 - got a response @@ -557,7 +593,7 @@ t/headers.t ............... 1..3 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:46187/ +# TestServer: You can connect to your server at http://localhost:39437/ ok 2 - Added request to the queue ok 3 - Got a response ok @@ -584,7 +620,7 @@ t/not-modified.t .......... 1..4 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:38687/ +# TestServer: You can connect to your server at http://localhost:38091/ ok 2 - Added request to the queue ok 3 - 304 Not modified ok 4 - does not have a previous reponse @@ -592,8 +628,8 @@ t/peer-addr.t ............. 1..4 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:41275/ -ok 2 - Added request to http://example.org:41275 to the queue with peer_addr set to 'localhost' +# TestServer: You can connect to your server at http://localhost:36717/ +ok 2 - Added request to http://example.org:36717 to the queue with peer_addr set to 'localhost' ok 3 - Got a response ok 4 - Got expected response ok @@ -613,9 +649,9 @@ ok 2 - change interval to 3 seconds ok 3 - new interval is 3 seconds ok 4 - starting a test server -# TestServer: You can connect to your server at http://localhost:39611/ +# TestServer: You can connect to your server at http://localhost:40275/ ok 5 - starting a test server -# TestServer: You can connect to your server at http://localhost:38411/ +# TestServer: You can connect to your server at http://localhost:45301/ ok 6 - Add the requests ok 7 - Got correct to_send count ok 8 - Got correct total count @@ -629,26 +665,26 @@ t/poll-interval.t ......... 1..24 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:46631/ +# TestServer: You can connect to your server at http://localhost:44345/ ok 2 - $q->poll_interval == 0.05 ok 3 - set poll_interval to 0.1 ok 4 - $q->poll_interval == 0.1 -ok 5 - Added request to the queue - http://localhost:46631?delay=3 +ok 5 - Added request to the queue - http://localhost:44345?delay=3 ok 6 - next_response returns at once ok 7 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 8 - wait_for_next_response(0) returns at once ok 9 - Returned quickly (less than 0.4 secs) (0.01 < 0.40) ok 10 - wait_for_next_response(1) returns after 1 sec without a response -ok 11 - Returned after 1 sec delay (1.01 >= 1.00) -ok 12 - Returned before 1.4 sec delay (1.01 < 1.40) +ok 11 - Returned after 1 sec delay (1.02 >= 1.00) +ok 12 - Returned before 1.4 sec delay (1.02 < 1.40) ok 13 - wait_for_next_response got the response -ok 14 - Returned after 3 sec delay (3.11 > 3.00) +ok 14 - Returned after 3 sec delay (3.12 > 3.00) ok 15 - good response (200) ok 16 - is a success -ok 17 - Added request to the queue - http://localhost:46631?delay=1 +ok 17 - Added request to the queue - http://localhost:44345?delay=1 ok 18 - wait_for_next_response got the response ok 19 - Returned after 1 sec delay (1.00 > 1.00) -ok 20 - Returned before 2 sec delay (1.00 < 2.00) +ok 20 - Returned before 2 sec delay (1.01 < 2.00) ok 21 - good response (200) ok 22 - is a success ok 23 - Did not get a response @@ -658,21 +694,21 @@ t/proxy.t ................. 1..16 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:36215/ +# TestServer: You can connect to your server at http://localhost:42351/ ok 2 - starting a test server -ok 3 - got http://localhost:36215 -ok 4 - got http://localhost:42655 -# TestServer: You can connect to your server at http://localhost:42655/ -ok 5 - Added request to the queue - http://localhost:36215/foo/bar?redirect=2 +ok 3 - got http://localhost:42351 +ok 4 - got http://localhost:38623 +# TestServer: You can connect to your server at http://localhost:38623/ +ok 5 - Added request to the queue - http://localhost:42351/foo/bar?redirect=2 ok 6 - Got a '200' response ok 7 - check for proxy header '' -ok 8 - Added request to the queue - http://localhost:36215/foo/bar?delay=1 +ok 8 - Added request to the queue - http://localhost:42351/foo/bar?delay=1 ok 9 - Got a '200' response ok 10 - check for proxy header '' -ok 11 - Added request to the queue - http://localhost:36215/foo/bar?redirect=2 +ok 11 - Added request to the queue - http://localhost:42351/foo/bar?redirect=2 ok 12 - Got a '200' response ok 13 - check for proxy header 'yes' -ok 14 - Added request to the queue - http://localhost:36215/foo/bar?delay=1 +ok 14 - Added request to the queue - http://localhost:42351/foo/bar?delay=1 ok 15 - Got a '200' response ok 16 - check for proxy header 'yes' ok @@ -680,7 +716,7 @@ t/redirects.t ............. 1..21 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:34671/ +# TestServer: You can connect to your server at http://localhost:37209/ ok 2 - max_redirect == 7 ok 3 - Added request to the queue ok 4 - No longer a redirect @@ -706,7 +742,7 @@ t/remove.t ................ 1..21 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:41415/ +# TestServer: You can connect to your server at http://localhost:38549/ ok 2 - total_count starts at zero ok 3 - added fast / to_return item ok 4 - to_return_count is one @@ -718,7 +754,7 @@ ok 10 - removal of bad id '123456' returns false ok 11 - total_count is now zero ok 12 - starting a test server -# TestServer: You can connect to your server at http://localhost:41743/ +# TestServer: You can connect to your server at http://localhost:38207/ ok 13 - total_count starts at zero ok 14 - added fast / to_return item ok 15 - to_return_count is one @@ -750,39 +786,39 @@ ok t/strip-host-from-uri.t ... 1..5 -ok 1 - correctly stripped https://www.w3.org:80/Protocols to /Protocols +ok 1 - correctly stripped https://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok 2 - correctly stripped http://localhost:8080?delay=3 to /?delay=3 -ok 3 - correctly stripped https://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 -ok 4 - correctly stripped http://www.w3.org:8080/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 -ok 5 - correctly stripped http://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 +ok 3 - correctly stripped http://www.w3.org/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 +ok 4 - correctly stripped https://www.w3.org:80/Protocols to /Protocols +ok 5 - correctly stripped http://www.w3.org:8080/Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 to /Protocols/rfc2616/rfc2616-sec5.html?foo=bar\#sec5.1.2 ok t/template.t .............. skipped: just a template to base other tests on t/timeout.t ............... 1..20 ok 1 - starting a test server -# TestServer: You can connect to your server at http://localhost:33479/ +# TestServer: You can connect to your server at http://localhost:46835/ ok 2 - $q->timeout == 180 -ok 3 - Added request to the queue - http://localhost:33479?delay=0 +ok 3 - Added request to the queue - http://localhost:46835?delay=0 ok 4 - Not timed out (200) ok 5 - Set the timeout really low -ok 6 - Added delayed request to the queue - http://localhost:33479?delay=3 +ok 6 - Added delayed request to the queue - http://localhost:46835?delay=3 ok 7 - timed out (504) ok 8 - is an error -ok 9 - Added trickle request to the queue - http://localhost:33479?trickle=4 +ok 9 - Added trickle request to the queue - http://localhost:46835?trickle=4 ok 10 - response ok (200) ok 11 - is not an error ok 12 - Set the timeout really low ok 13 - Set the max_request_time really low -ok 14 - Added trickle request to the queue - http://localhost:33479?trickle=3 +ok 14 - Added trickle request to the queue - http://localhost:46835?trickle=3 ok 15 - timed out (504) ok 16 - is an error ok 17 - Lengthen the timeout ok 18 - Lengthen the max_request_time -ok 19 - Added delayed request to the queue - http://localhost:33479?delay=3 +ok 19 - Added delayed request to the queue - http://localhost:46835?delay=3 ok 20 - Not timed out (200) ok All tests successful. -Files=26, Tests=184, 46 wallclock secs ( 0.11 usr 0.07 sys + 4.60 cusr 1.00 csys = 5.78 CPU) +Files=26, Tests=184, 46 wallclock secs ( 0.14 usr 0.06 sys + 4.40 cusr 0.96 csys = 5.56 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libhttp-async-perl-0.33' create-stamp debian/debhelper-build-stamp @@ -820,12 +856,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2673281/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3801956 and its subdirectories -I: Current time: Wed Dec 24 21:54:22 -12 2025 -I: pbuilder-time-stamp: 1766656462 +I: removing directory /srv/workspace/pbuilder/2673281 and its subdirectories +I: Current time: Fri Nov 22 17:32:47 +14 2024 +I: pbuilder-time-stamp: 1732246367 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libhttp-async-perl_0.33-3.diff: 74.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libhttp-async-perl_0.33-3.diff.gz b2/build.log: 77.5% -- replaced with stdout Compressing the 1st log... b1/build.log: 78.0% -- replaced with stdout Fri Nov 22 03:32:50 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libhttp-async-perl_unstable_arm64_1732246370 + touch /var/log/reproducible-builds/diffoscope_stamp_libhttp-async-perl_unstable_arm64_1732246370 + RESULT=0 + systemd-run '--description=diffoscope on libhttp-async-perl/0.33-3 in unstable/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_11-71993 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj --run-session -c jenkins-reproducible-unstable-diffoscope-24d0a1d1-ee28-4a67-8921-ee764f9ea84c -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/dbd-tmp-QKd00Qf ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/libhttp-async-perl_0.33-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/libhttp-async-perl_0.33-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/libhttp-async-perl_0.33-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1/libhttp-async-perl_0.33-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2/libhttp-async-perl_0.33-3_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_11-71993.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/libhttp-async-perl_0.33-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/libhttp-async-perl_0.33-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/libhttp-async-perl_0.33-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b1/libhttp-async-perl_0.33-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.MaaGUJNj/b2/libhttp-async-perl_0.33-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.333s) 0.333s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.014s) 0.014s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 658ms CPU time consumed: 657ms _ _ _ _ _ _ | (_) |__ | |__ | |_| |_ _ __ __ _ ___ _ _ _ __ ___ _ __ | | | '_ \| '_ \| __| __| '_ \ _____ / _` / __| | | | '_ \ / __|____| '_ \ | | | |_) | | | | |_| |_| |_) |_____| (_| \__ \ |_| | | | | (_|_____| |_) | |_|_|_.__/|_| |_|\__|\__| .__/ \__,_|___/\__, |_| |_|\___| | .__/ |_| |___/ |_| _ ___ _ __| | / _ \ '__| | | __/ | | | \___|_| |_| Fri Nov 22 03:32:51 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Fri Nov 22 03:32:51 UTC 2024 I: libhttp-async-perl from unstable built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-22 03:32:52] INFO: Starting at 2024-11-22 03:32:52.008071 [2024-11-22 03:32:52] INFO: Generating the pages of 1 package(s) [2024-11-22 03:32:52] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/arm64/libhttp-async-perl didn't produce a buildlog, even though it has been built. [2024-11-22 03:32:52] CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/bookworm/amd64/libhttp-async-perl_0.33-3_amd64.buildinfo [2024-11-22 03:32:52] INFO: Finished at 2024-11-22 03:32:52.519853, took: 0:00:00.511788 Fri Nov 22 03:32:52 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/arm64/libhttp-async-perl.html Fri Nov 22 03:32:52 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Nov 22 03:32:52 UTC 2024 I: Submitting 8.0K b1/libhttp-async-perl_0.33-3_arm64.buildinfo.asc https://buildinfo.debian.net/d9c48d306a6d3d51ac76874f682ee977c9b98030/libhttp-async-perl_0.33-3_all Fri Nov 22 03:32:53 UTC 2024 I: Submitting 8.0K b2/libhttp-async-perl_0.33-3_arm64.buildinfo.asc https://buildinfo.debian.net/7735c9b30c9e09516ab61e0b663d901fc1d641d1/libhttp-async-perl_0.33-3_all Fri Nov 22 03:32:54 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Nov 22 03:32:54 UTC 2024 I: Done submitting .buildinfo files. Fri Nov 22 03:32:54 UTC 2024 I: Removing signed libhttp-async-perl_0.33-3_arm64.buildinfo.asc files: removed './b1/libhttp-async-perl_0.33-3_arm64.buildinfo.asc' removed './b2/libhttp-async-perl_0.33-3_arm64.buildinfo.asc' 1732246374 arm64 unstable libhttp-async-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libhttp-async-perl_0.33-3.rbuild.log: 75.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libhttp-async-perl_0.33-3.rbuild.log.gz [2024-11-22 03:32:54] INFO: Starting at 2024-11-22 03:32:54.404070 [2024-11-22 03:32:54] INFO: Generating the pages of 1 package(s) [2024-11-22 03:32:54] CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/bookworm/amd64/libhttp-async-perl_0.33-3_amd64.buildinfo [2024-11-22 03:32:54] INFO: Finished at 2024-11-22 03:32:54.943123, took: 0:00:00.539058 All cleanup done. Fri Nov 22 03:32:55 UTC 2024 - total duration: 0h 3m 4s. Fri Nov 22 03:32:55 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-uNqJ9UwA, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 3min 7.400s CPU time consumed: 7.470s