Running as unit: rb-build-arm64_11-84953.service ==================================================================================== Sat Feb 22 03:19:29 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_11) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Sat Feb 22 03:19:29 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-HFSpXKx3" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Feb 22 03:19:29 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Sat Feb 22 03:19:29 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-gM4IbF' Sat Feb 22 03:19:30 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Sat Feb 22 03:19:30 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-Tmd5g6' ok, let's check if libio-fdpass-perl is building anywhere yet… ok, libio-fdpass-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libio-fdpass-perl in unstable on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Sat Feb 22 03:19:34 UTC 2025 I: starting to build libio-fdpass-perl/unstable/arm64 on jenkins on '2025-02-22 03:19' Sat Feb 22 03:19:34 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_11/84953/console.log 1740194374 arm64 unstable libio-fdpass-perl Sat Feb 22 03:19:34 UTC 2025 I: Downloading source for unstable/libio-fdpass-perl=1.3-1 --2025-02-22 03:19:34-- http://deb.debian.org/debian/pool/main/libi/libio-fdpass-perl/libio-fdpass-perl_1.3-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2360 (2.3K) [text/prs.lines.tag] Saving to: ‘libio-fdpass-perl_1.3-1.dsc’ 0K .. 100% 276M=0s 2025-02-22 03:19:34 (276 MB/s) - ‘libio-fdpass-perl_1.3-1.dsc’ saved [2360/2360] --2025-02-22 03:19:34-- http://deb.debian.org/debian/pool/main/libi/libio-fdpass-perl/libio-fdpass-perl_1.3-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2360 (2.3K) [text/prs.lines.tag] Saving to: ‘libio-fdpass-perl_1.3-1.dsc’ 0K .. 100% 276M=0s 2025-02-22 03:19:34 (276 MB/s) - ‘libio-fdpass-perl_1.3-1.dsc’ saved [2360/2360] Sat Feb 22 03:19:34 UTC 2025 I: libio-fdpass-perl_1.3-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libio-fdpass-perl Binary: libio-fdpass-perl Architecture: any Version: 1.3-1 Maintainer: Debian Perl Group Uploaders: Lucas Kanashiro Homepage: https://metacpan.org/release/IO-FDPass Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native Package-List: libio-fdpass-perl deb perl optional arch=any Checksums-Sha1: c73c4f349b2580ee4b86e2db08e4bb6b8dc8c937 6232 libio-fdpass-perl_1.3.orig.tar.gz b78de149f8abc5c6956d76d3e626054bae815159 1804 libio-fdpass-perl_1.3-1.debian.tar.xz Checksums-Sha256: 598f48d7cd80bcd13ed59b816eee400eba8194a396eaf895476d792a18839557 6232 libio-fdpass-perl_1.3.orig.tar.gz 8a7ab81f2f68ea300039fab6a2f45c28d35817d95594d0bbba1f5f35bb115204 1804 libio-fdpass-perl_1.3-1.debian.tar.xz Files: 773444ffb6958fcfe017eaa5d153d8fa 6232 libio-fdpass-perl_1.3.orig.tar.gz 95575589581a022e4b7d311970d26e2b 1804 libio-fdpass-perl_1.3-1.debian.tar.xz Dgit: 39fd28b90f8ef5fc2096efa0e90c24ac9f073a30 debian archive/debian/1.3-1 https://git.dgit.debian.org/libio-fdpass-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl/2chdfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZgjhAAprpK7qM0fPc5m5ee47lG+Xlv3QOJ8Jht7FJiHYb+NJVgZ+jyZUypVlZL 0A/8xLuMnhUuu6SFBvpq7lchderTjuo8NZjJ9YFc7dWJtLF+C7OdX3dZJnWjfw/m 2n0FkNDSgHec3hm4c79kvkpFpGdI2qMzm3kFGcJLHvzuWjNvR1DlmJf/26oJMP6O UKJ7NbRkGJFDhBI2NRQXEwekzpRsAfdtC0WZDLXz3urFzYJYWXn4Gp4uSkQqTtWU 1plCX8eVNGxp2OpSvccxaY9qX6OYJssDN9HiCJR3bddNliC5Uq0GnETBE7vhA49x gOqcXppuA+JRVGXoPF0BEkIZFN/UhFLV6XDO6UoRdbGgSC/8voE/Ym/AERJR11GE H7KJHs4GDzCSg0//rK3qzxvwYlWUuiCulroD6Y1yKsONjn2MqeeF2IcPMlU1lnNj 3MEronS6C3ZN31VcgAPD0cc3WHT04Ajwt31DTaBlmfXu7/64b/wlJMO0ITAC88IH pEDiHV91ai+d8RP3qtc4litdKwB9kej88JgVQ7Eh1hnu7vnfb1JfuDHP/eKwq2f4 UsTb0tpt1sNIMOhk1rREeQt4eI3KulaJsOJG6CH61rK2cdUv+EygJcZiYk6M0NMi cwkuqJsQMqvDdFCZ1+CNPGK87rwqPWIkJXliVP3C81pmHWc1GCc= =A334 -----END PGP SIGNATURE----- Sat Feb 22 03:19:34 UTC 2025 I: Checking whether the package is not for us Sat Feb 22 03:19:34 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Sat Feb 22 03:19:34 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Sat Feb 22 03:19:34 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Sat Feb 22 03:19:34 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-DDPc79' ==================================================================================== Sat Feb 22 03:19:36 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libio-fdpass-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs 1.3-1" as arguments. Sat Feb 22 03:19:36 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-eouZ9QkI" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Feb 22 03:19:36 UTC 2025 I: Downloading source for unstable/libio-fdpass-perl=1.3-1 Reading package lists... NOTICE: 'libio-fdpass-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 10.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (dsc) [2360 B] Get:2 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (tar) [6232 B] Get:3 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (diff) [1804 B] Fetched 10.4 kB in 0s (180 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libio-fdpass-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 10.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (dsc) [2360 B] Get:2 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (tar) [6232 B] Get:3 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (diff) [1804 B] Fetched 10.4 kB in 0s (180 kB/s) Download complete and in download only mode ============================================================================= Building libio-fdpass-perl in unstable on arm64 on codethink04-arm64 now. Date: Sat Feb 22 03:19:36 GMT 2025 Date UTC: Sat Feb 22 03:19:36 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Feb 21 15:19:36 -12 2025 I: pbuilder-time-stamp: 1740194376 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libio-fdpass-perl_1.3-1.dsc] I: copying [./libio-fdpass-perl_1.3.orig.tar.gz] I: copying [./libio-fdpass-perl_1.3-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libio-fdpass-perl_1.3-1.dsc: unsupported subcommand dpkg-source: info: extracting libio-fdpass-perl in libio-fdpass-perl-1.3 dpkg-source: info: unpacking libio-fdpass-perl_1.3.orig.tar.gz dpkg-source: info: unpacking libio-fdpass-perl_1.3-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1386014/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='04e4ebc074774a40bd83cd5486d06f92' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1386014' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_4GLg --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1 --logfile b1/build.log libio-fdpass-perl_1.3-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1386014/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19889 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 21.1 MB of archives. After unpacking 85.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.4-4 [92.1 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-5 [284 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-1 [449 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-6 [9239 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libcanary-stability-perl all 2013-1 [7884 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-2 [1019 kB] Fetched 21.1 MB in 0s (195 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19889 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-4_arm64.deb ... Unpacking bsdextrautils (2.40.4-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_arm64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-1_arm64.deb ... Unpacking libunistring5:arm64 (1.3-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-6_arm64.deb ... Unpacking libicu72:arm64 (72.1-6) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../30-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../31-libperl-dev_5.40.1-2_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-6) ... Setting up bsdextrautils (2.40.4-4) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libperl-dev:arm64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:arm64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libio-fdpass-perl-1.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libio-fdpass-perl_1.3-1_source.changes dpkg-buildpackage: info: source package libio-fdpass-perl dpkg-buildpackage: info: source version 1.3-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by IO::FDPass. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by IO::FDPass, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of IO::FDPass with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::FDPass Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' Running Mkbootstrap for FDPass () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' FDPass.xs > FDPass.xsc cp FDPass.pm blib/lib/IO/FDPass.pm chmod 644 "FDPass.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 mv FDPass.xsc FDPass.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.3\" -DXS_VERSION=\"1.3\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" FDPass.c rm -f blib/arch/auto/IO/FDPass/FDPass.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong FDPass.o -o blib/arch/auto/IO/FDPass/FDPass.so \ \ chmod 755 blib/arch/auto/IO/FDPass/FDPass.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t ... 1..1 ok 1 ok t/01_basic.t .. 1..7 ok 1 ok 2 ok 3 ok 4 # 5 ok 5 # 4 ok 6 # 3 ok 7 ok All tests successful. Files=2, Tests=8, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.03 cusr 0.01 csys = 0.07 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libio-fdpass-perl/ make -j12 install DESTDIR=/build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/IO/FDPass/FDPass.so Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/IO/FDPass.pm Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/share/man/man3/IO::FDPass.3pm make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libio-fdpass-perl' in '../libio-fdpass-perl_1.3-1_arm64.deb'. dpkg-deb: building package 'libio-fdpass-perl-dbgsym' in '../libio-fdpass-perl-dbgsym_1.3-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libio-fdpass-perl_1.3-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libio-fdpass-perl_1.3-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1386014 and its subdirectories I: Current time: Fri Feb 21 15:19:57 -12 2025 I: pbuilder-time-stamp: 1740194397 Sat Feb 22 03:19:57 UTC 2025 I: Signing ./b1/libio-fdpass-perl_1.3-1_arm64.buildinfo as libio-fdpass-perl_1.3-1_arm64.buildinfo.asc Sat Feb 22 03:19:57 UTC 2025 I: Signed ./b1/libio-fdpass-perl_1.3-1_arm64.buildinfo as ./b1/libio-fdpass-perl_1.3-1_arm64.buildinfo.asc Sat Feb 22 03:19:57 UTC 2025 - build #1 for libio-fdpass-perl/unstable/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Sat Feb 22 03:19:57 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-eouZ9QkI, removing. /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 03:19 b1 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 03:19 b2 -rw-r--r-- 1 jenkins jenkins 2360 Jan 7 2021 libio-fdpass-perl_1.3-1.dsc -rw------- 1 jenkins jenkins 3533 Feb 22 03:19 rbuildlog.9UUTsbZ /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1: total 108 -rw-r--r-- 1 jenkins jenkins 25397 Feb 22 03:19 build.log -rw-r--r-- 1 jenkins jenkins 26240 Feb 22 03:19 libio-fdpass-perl-dbgsym_1.3-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1804 Feb 22 03:19 libio-fdpass-perl_1.3-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2360 Feb 22 03:19 libio-fdpass-perl_1.3-1.dsc -rw-r--r-- 1 jenkins jenkins 4981 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5863 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2065 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 10776 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 2173 Feb 22 03:19 libio-fdpass-perl_1.3-1_source.changes -rw-r--r-- 1 jenkins jenkins 6232 Feb 22 03:19 libio-fdpass-perl_1.3.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2: total 0 Sat Feb 22 03:19:58 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Feb 21 15:19:36 -12 2025 I: pbuilder-time-stamp: 1740194376 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libio-fdpass-perl_1.3-1.dsc] I: copying [./libio-fdpass-perl_1.3.orig.tar.gz] I: copying [./libio-fdpass-perl_1.3-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libio-fdpass-perl_1.3-1.dsc: unsupported subcommand dpkg-source: info: extracting libio-fdpass-perl in libio-fdpass-perl-1.3 dpkg-source: info: unpacking libio-fdpass-perl_1.3.orig.tar.gz dpkg-source: info: unpacking libio-fdpass-perl_1.3-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1386014/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='04e4ebc074774a40bd83cd5486d06f92' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1386014' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_4GLg --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1 --logfile b1/build.log libio-fdpass-perl_1.3-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1386014/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19889 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 21.1 MB of archives. After unpacking 85.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.4-4 [92.1 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-5 [284 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-1 [449 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-6 [9239 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libcanary-stability-perl all 2013-1 [7884 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-2 [1019 kB] Fetched 21.1 MB in 0s (195 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19889 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-4_arm64.deb ... Unpacking bsdextrautils (2.40.4-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_arm64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-1_arm64.deb ... Unpacking libunistring5:arm64 (1.3-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-6_arm64.deb ... Unpacking libicu72:arm64 (72.1-6) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../30-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../31-libperl-dev_5.40.1-2_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-6) ... Setting up bsdextrautils (2.40.4-4) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libperl-dev:arm64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:arm64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libio-fdpass-perl-1.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libio-fdpass-perl_1.3-1_source.changes dpkg-buildpackage: info: source package libio-fdpass-perl dpkg-buildpackage: info: source version 1.3-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by IO::FDPass. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by IO::FDPass, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of IO::FDPass with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::FDPass Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' Running Mkbootstrap for FDPass () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' FDPass.xs > FDPass.xsc cp FDPass.pm blib/lib/IO/FDPass.pm chmod 644 "FDPass.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 mv FDPass.xsc FDPass.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.3\" -DXS_VERSION=\"1.3\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" FDPass.c rm -f blib/arch/auto/IO/FDPass/FDPass.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong FDPass.o -o blib/arch/auto/IO/FDPass/FDPass.so \ \ chmod 755 blib/arch/auto/IO/FDPass/FDPass.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t ... 1..1 ok 1 ok t/01_basic.t .. 1..7 ok 1 ok 2 ok 3 ok 4 # 5 ok 5 # 4 ok 6 # 3 ok 7 ok All tests successful. Files=2, Tests=8, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.03 cusr 0.01 csys = 0.07 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libio-fdpass-perl/ make -j12 install DESTDIR=/build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/IO/FDPass/FDPass.so Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/IO/FDPass.pm Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/share/man/man3/IO::FDPass.3pm make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libio-fdpass-perl' in '../libio-fdpass-perl_1.3-1_arm64.deb'. dpkg-deb: building package 'libio-fdpass-perl-dbgsym' in '../libio-fdpass-perl-dbgsym_1.3-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libio-fdpass-perl_1.3-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libio-fdpass-perl_1.3-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1386014 and its subdirectories I: Current time: Fri Feb 21 15:19:57 -12 2025 I: pbuilder-time-stamp: 1740194397 Sat Feb 22 03:19:59 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Sat Feb 22 03:19:59 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Sat Feb 22 03:19:59 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Sat Feb 22 03:19:59 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-ENsfAo' ==================================================================================== Fri Mar 27 09:43:00 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libio-fdpass-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs 1.3-1" as arguments. Fri Mar 27 09:43:00 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-2aGgvcg0" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Mar 27 09:43:00 UTC 2026 I: Downloading source for unstable/libio-fdpass-perl=1.3-1 Reading package lists... NOTICE: 'libio-fdpass-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 10.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (dsc) [2360 B] Get:2 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (tar) [6232 B] Get:3 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (diff) [1804 B] Fetched 10.4 kB in 0s (281 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libio-fdpass-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libio-fdpass-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 10.4 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (dsc) [2360 B] Get:2 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (tar) [6232 B] Get:3 http://deb.debian.org/debian unstable/main libio-fdpass-perl 1.3-1 (diff) [1804 B] Fetched 10.4 kB in 0s (281 kB/s) Download complete and in download only mode ============================================================================= Re-Building libio-fdpass-perl in unstable on arm64 on codethink03-arm64 now. Date: Fri Mar 27 09:43:01 GMT 2026 Date UTC: Fri Mar 27 09:43:01 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_ntZd + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libio-fdpass-perl = debian-installer -o libio-fdpass-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libio-fdpass-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_ntZd --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2 --logfile b2/build.log libio-fdpass-perl_1.3-1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build I: Current time: Fri Mar 27 23:43:01 +14 2026 I: pbuilder-time-stamp: 1774604581 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libio-fdpass-perl_1.3-1.dsc] I: copying [./libio-fdpass-perl_1.3.orig.tar.gz] I: copying [./libio-fdpass-perl_1.3-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libio-fdpass-perl_1.3-1.dsc: unsupported subcommand dpkg-source: info: extracting libio-fdpass-perl in libio-fdpass-perl-1.3 dpkg-source: info: unpacking libio-fdpass-perl_1.3.orig.tar.gz dpkg-source: info: unpacking libio-fdpass-perl_1.3-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Mar 27 09:43 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2150555 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_ntZd --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2 --logfile b2/build.log libio-fdpass-perl_1.3-1.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19889 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 21.1 MB of archives. After unpacking 85.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.4-4 [92.1 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-5 [284 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-3 [539 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-1 [449 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-6 [9239 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libcanary-stability-perl all 2013-1 [7884 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-2 [1019 kB] Fetched 21.1 MB in 0s (97.2 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19889 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-4_arm64.deb ... Unpacking bsdextrautils (2.40.4-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-5_arm64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-1_arm64.deb ... Unpacking libunistring5:arm64 (1.3-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-6_arm64.deb ... Unpacking libicu72:arm64 (72.1-6) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../30-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../31-libperl-dev_5.40.1-2_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-6) ... Setting up bsdextrautils (2.40.4-4) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libperl-dev:arm64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:arm64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.40-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libio-fdpass-perl-1.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libio-fdpass-perl_1.3-1_source.changes dpkg-buildpackage: info: source package libio-fdpass-perl dpkg-buildpackage: info: source version 1.3-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by IO::FDPass. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by IO::FDPass, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of IO::FDPass with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::FDPass Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' Running Mkbootstrap for FDPass () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' FDPass.xs > FDPass.xsc chmod 644 "FDPass.bs" cp FDPass.pm blib/lib/IO/FDPass.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 mv FDPass.xsc FDPass.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.3\" -DXS_VERSION=\"1.3\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" FDPass.c rm -f blib/arch/auto/IO/FDPass/FDPass.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong FDPass.o -o blib/arch/auto/IO/FDPass/FDPass.so \ \ chmod 755 blib/arch/auto/IO/FDPass/FDPass.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t ... 1..1 ok 1 ok t/01_basic.t .. 1..7 ok 1 ok 2 ok 3 ok 4 # 5 ok 5 # 4 ok 6 # 3 ok 7 ok All tests successful. Files=2, Tests=8, 1 wallclock secs ( 0.01 usr 0.02 sys + 0.02 cusr 0.00 csys = 0.05 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libio-fdpass-perl/ make -j12 install DESTDIR=/build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/IO/FDPass/FDPass.so Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/IO/FDPass.pm Installing /build/reproducible-path/libio-fdpass-perl-1.3/debian/libio-fdpass-perl/usr/share/man/man3/IO::FDPass.3pm make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libio-fdpass-perl-dbgsym' in '../libio-fdpass-perl-dbgsym_1.3-1_arm64.deb'. dpkg-deb: building package 'libio-fdpass-perl' in '../libio-fdpass-perl_1.3-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libio-fdpass-perl_1.3-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libio-fdpass-perl_1.3-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2150555 and its subdirectories I: Current time: Fri Mar 27 23:43:27 +14 2026 I: pbuilder-time-stamp: 1774604607 + false + set +x Fri Mar 27 09:43:27 UTC 2026 I: Signing ./b2/libio-fdpass-perl_1.3-1_arm64.buildinfo as libio-fdpass-perl_1.3-1_arm64.buildinfo.asc Fri Mar 27 09:43:27 UTC 2026 I: Signed ./b2/libio-fdpass-perl_1.3-1_arm64.buildinfo as ./b2/libio-fdpass-perl_1.3-1_arm64.buildinfo.asc Fri Mar 27 09:43:27 UTC 2026 - build #2 for libio-fdpass-perl/unstable/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Fri Mar 27 09:43:27 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-2aGgvcg0, removing. /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs: total 44 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 03:19 b1 drwxr-xr-x 2 jenkins jenkins 4096 Feb 22 03:20 b2 -rw-r--r-- 1 jenkins jenkins 2360 Jan 7 2021 libio-fdpass-perl_1.3-1.dsc -rw------- 1 jenkins jenkins 29231 Feb 22 03:19 rbuildlog.9UUTsbZ /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1: total 108 -rw-r--r-- 1 jenkins jenkins 25397 Feb 22 03:19 build.log -rw-r--r-- 1 jenkins jenkins 26240 Feb 22 03:19 libio-fdpass-perl-dbgsym_1.3-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1804 Feb 22 03:19 libio-fdpass-perl_1.3-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2360 Feb 22 03:19 libio-fdpass-perl_1.3-1.dsc -rw-r--r-- 1 jenkins jenkins 4981 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5863 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2065 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 10776 Feb 22 03:19 libio-fdpass-perl_1.3-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 2173 Feb 22 03:19 libio-fdpass-perl_1.3-1_source.changes -rw-r--r-- 1 jenkins jenkins 6232 Feb 22 03:19 libio-fdpass-perl_1.3.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2: total 108 -rw-r--r-- 1 jenkins jenkins 27352 Feb 22 03:20 build.log -rw-r--r-- 1 jenkins jenkins 26240 Feb 22 03:20 libio-fdpass-perl-dbgsym_1.3-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1804 Feb 22 03:20 libio-fdpass-perl_1.3-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2360 Feb 22 03:20 libio-fdpass-perl_1.3-1.dsc -rw-r--r-- 1 jenkins jenkins 4981 Feb 22 03:20 libio-fdpass-perl_1.3-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5863 Feb 22 03:20 libio-fdpass-perl_1.3-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2065 Feb 22 03:20 libio-fdpass-perl_1.3-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 10776 Feb 22 03:20 libio-fdpass-perl_1.3-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 2173 Feb 22 03:20 libio-fdpass-perl_1.3-1_source.changes -rw-r--r-- 1 jenkins jenkins 6232 Feb 22 03:20 libio-fdpass-perl_1.3.orig.tar.gz Sat Feb 22 03:20:28 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Sat Feb 22 03:20:29 UTC 2025 I: libio-fdpass-perl_1.3-1_arm64.changes: Format: 1.8 Date: Thu, 07 Jan 2021 03:26:27 +0100 Source: libio-fdpass-perl Binary: libio-fdpass-perl libio-fdpass-perl-dbgsym Architecture: arm64 Version: 1.3-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libio-fdpass-perl - module to pass a file descriptor over a socket Changes: libio-fdpass-perl (1.3-1) unstable; urgency=medium . * Team upload. . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. * Update 'DEB_BUILD_MAINT_OPTIONS = hardening=+bindnow' to '=+all'. . [ Debian Janitor ] * Bump debhelper from old 11 to 12. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). . [ gregor herrmann ] * Import upstream version 1.3. * Declare compliance with Debian Policy 4.5.1. * Set Rules-Requires-Root: no. * Bump debhelper-compat to 13. * Mention module name in long description. Checksums-Sha1: 3211c2905b48f4d2c566c84ccc6031d4f5d9775f 26240 libio-fdpass-perl-dbgsym_1.3-1_arm64.deb ec55464af037703b1cd407826536802bb3e764d4 4981 libio-fdpass-perl_1.3-1_arm64.buildinfo af5ed151c5a2a41522c8cbcba148f3fec6f51792 10776 libio-fdpass-perl_1.3-1_arm64.deb Checksums-Sha256: 71af031f9ce6b8c10a101c30414e676329ef8c3918b382e594cc02e5f2a4c1f9 26240 libio-fdpass-perl-dbgsym_1.3-1_arm64.deb 0e4c30a88d0e3c6445aa00a0674b5f2371ee180a7087b793946cb97fc9e7ce33 4981 libio-fdpass-perl_1.3-1_arm64.buildinfo 361bf64ca528551821b7bf019321720eff92c609f01e501b39996e79bf73cef2 10776 libio-fdpass-perl_1.3-1_arm64.deb Files: eb1b3d4833f52740da1f580b55a1cde3 26240 debug optional libio-fdpass-perl-dbgsym_1.3-1_arm64.deb c46079675819d3e72396eefcaef72287 4981 perl optional libio-fdpass-perl_1.3-1_arm64.buildinfo b0d2a06243f099abc357fedaa97c3e96 10776 perl optional libio-fdpass-perl_1.3-1_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libio-fdpass-perl_1.3-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libio-fdpass-perl_1.3-1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libio-fdpass-perl_1.3-1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libio-fdpass-perl_1.3-1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/arm64/libio-fdpass-perl_1.3-1_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libio-fdpass-perl_1.3-1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-02-22 03:19:58.574589506 +0000 +++ b2/build.log 2025-02-22 03:20:28.529234455 +0000 @@ -1,6 +1,7 @@ +W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build -I: Current time: Fri Feb 21 15:19:36 -12 2025 -I: pbuilder-time-stamp: 1740194376 +I: Current time: Fri Mar 27 23:43:01 +14 2026 +I: pbuilder-time-stamp: 1774604581 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -22,52 +23,83 @@ dpkg-source: info: unpacking libio-fdpass-perl_1.3-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/1386014/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Mar 27 09:43 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='04e4ebc074774a40bd83cd5486d06f92' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='1386014' - PS1='# ' - PS2='> ' + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2150555 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_4GLg --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1 --logfile b1/build.log libio-fdpass-perl_1.3-1.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/pbuilderrc_ntZd --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2 --logfile b2/build.log libio-fdpass-perl_1.3-1.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/1386014/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -140,7 +172,7 @@ Get: 30 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libcanary-stability-perl all 2013-1 [7884 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-2 [1019 kB] -Fetched 21.1 MB in 0s (195 MB/s) +Fetched 21.1 MB in 0s (97.2 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19889 files and directories currently installed.) @@ -283,7 +315,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libio-fdpass-perl-1.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libio-fdpass-perl_1.3-1_source.changes +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libio-fdpass-perl-1.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libio-fdpass-perl_1.3-1_source.changes dpkg-buildpackage: info: source package libio-fdpass-perl dpkg-buildpackage: info: source version 1.3-1 dpkg-buildpackage: info: source distribution unstable @@ -375,8 +411,8 @@ make[1]: Entering directory '/build/reproducible-path/libio-fdpass-perl-1.3' Running Mkbootstrap for FDPass () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' FDPass.xs > FDPass.xsc -cp FDPass.pm blib/lib/IO/FDPass.pm chmod 644 "FDPass.bs" +cp FDPass.pm blib/lib/IO/FDPass.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 mv FDPass.xsc FDPass.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libio-fdpass-perl-1.3=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.3\" -DXS_VERSION=\"1.3\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" FDPass.c @@ -407,7 +443,7 @@ ok 7 ok All tests successful. -Files=2, Tests=8, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.03 cusr 0.01 csys = 0.07 CPU) +Files=2, Tests=8, 1 wallclock secs ( 0.01 usr 0.02 sys + 0.02 cusr 0.00 csys = 0.05 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libio-fdpass-perl-1.3' create-stamp debian/debhelper-build-stamp @@ -443,8 +479,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libio-fdpass-perl' in '../libio-fdpass-perl_1.3-1_arm64.deb'. dpkg-deb: building package 'libio-fdpass-perl-dbgsym' in '../libio-fdpass-perl-dbgsym_1.3-1_arm64.deb'. +dpkg-deb: building package 'libio-fdpass-perl' in '../libio-fdpass-perl_1.3-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libio-fdpass-perl_1.3-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libio-fdpass-perl_1.3-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -452,12 +488,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2150555/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/1386014 and its subdirectories -I: Current time: Fri Feb 21 15:19:57 -12 2025 -I: pbuilder-time-stamp: 1740194397 +I: removing directory /srv/workspace/pbuilder/2150555 and its subdirectories +I: Current time: Fri Mar 27 23:43:27 +14 2026 +I: pbuilder-time-stamp: 1774604607 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libio-fdpass-perl_1.3-1.diff: 66.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libio-fdpass-perl_1.3-1.diff.gz b2/build.log: 72.2% -- replaced with stdout Compressing the 1st log... b1/build.log: 72.6% -- replaced with stdout Sat Feb 22 03:20:30 UTC 2025 I: diffoscope 288 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libio-fdpass-perl_unstable_arm64_1740194430 + touch /var/log/reproducible-builds/diffoscope_stamp_libio-fdpass-perl_unstable_arm64_1740194430 + RESULT=0 + systemd-run '--description=diffoscope on libio-fdpass-perl/1.3-1 in unstable/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_11-84953 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs --run-session -c jenkins-reproducible-unstable-diffoscope-83ce06b6-b6ce-45ec-ab27-31b767256c8c -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/dbd-tmp-SHVsQJe ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/libio-fdpass-perl_1.3-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/libio-fdpass-perl_1.3-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/libio-fdpass-perl_1.3-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1/libio-fdpass-perl_1.3-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2/libio-fdpass-perl_1.3-1_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_11-84953.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/libio-fdpass-perl_1.3-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/libio-fdpass-perl_1.3-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/libio-fdpass-perl_1.3-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b1/libio-fdpass-perl_1.3-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.SLPEmJvs/b2/libio-fdpass-perl_1.3-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 214ms CPU time consumed: 215ms _ _ _ _ __ _ _ | (_) |__ (_) ___ / _| __| |_ __ __ _ ___ ___ _ __ ___ _ __| | | | | '_ \| |/ _ \ _____| |_ / _` | '_ \ / _` / __/ __|_____| '_ \ / _ \ '__| | | | | |_) | | (_) |_____| _| (_| | |_) | (_| \__ \__ \_____| |_) | __/ | | | |_|_|_.__/|_|\___/ |_| \__,_| .__/ \__,_|___/___/ | .__/ \___|_| |_| |_| |_| Sat Feb 22 03:20:30 UTC 2025 I: diffoscope 288 found no differences in the changes files, and a .buildinfo file also exists. Sat Feb 22 03:20:30 UTC 2025 I: libio-fdpass-perl from unstable built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-02-22 03:20:31] INFO: Starting at 2025-02-22 03:20:31.312759 [2025-02-22 03:20:31] INFO: Generating the pages of 1 package(s) [2025-02-22 03:20:31] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/arm64/libio-fdpass-perl didn't produce a buildlog, even though it has been built. [2025-02-22 03:20:31] INFO: Finished at 2025-02-22 03:20:31.668419, took: 0:00:00.355666 Sat Feb 22 03:20:31 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/arm64/libio-fdpass-perl.html Sat Feb 22 03:20:31 UTC 2025 I: Submitting .buildinfo files to external archives: Sat Feb 22 03:20:31 UTC 2025 I: Submitting 8.0K b1/libio-fdpass-perl_1.3-1_arm64.buildinfo.asc https://buildinfo.debian.net/ec55464af037703b1cd407826536802bb3e764d4/libio-fdpass-perl_1.3-1_arm64 Sat Feb 22 03:20:33 UTC 2025 I: Submitting 8.0K b2/libio-fdpass-perl_1.3-1_arm64.buildinfo.asc https://buildinfo.debian.net/f72419a05f523b4e1034e5fa3268fe88fc9eae78/libio-fdpass-perl_1.3-1_arm64 Sat Feb 22 03:20:34 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Feb 22 03:20:34 UTC 2025 I: Done submitting .buildinfo files. Sat Feb 22 03:20:34 UTC 2025 I: Removing signed libio-fdpass-perl_1.3-1_arm64.buildinfo.asc files: removed './b1/libio-fdpass-perl_1.3-1_arm64.buildinfo.asc' removed './b2/libio-fdpass-perl_1.3-1_arm64.buildinfo.asc' 1740194434 arm64 unstable libio-fdpass-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libio-fdpass-perl_1.3-1.rbuild.log: 69.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libio-fdpass-perl_1.3-1.rbuild.log.gz [2025-02-22 03:20:34] INFO: Starting at 2025-02-22 03:20:34.890814 [2025-02-22 03:20:34] INFO: Generating the pages of 1 package(s) [2025-02-22 03:20:35] INFO: Finished at 2025-02-22 03:20:35.249628, took: 0:00:00.358822 All cleanup done. Sat Feb 22 03:20:35 UTC 2025 - total duration: 0h 1m 1s. Sat Feb 22 03:20:35 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-HFSpXKx3, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 5.805s CPU time consumed: 6.641s