Running as unit: rb-build-arm64_11-95523.service ==================================================================================== Fri Apr 25 02:52:17 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_11) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Fri Apr 25 02:52:17 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-A7vHFWub" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Apr 25 02:52:17 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Apr 25 02:52:17 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-oDOG9W' Fri Apr 25 02:52:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Apr 25 02:52:18 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-EVVlsM' ok, let's check if libproc-simple-perl is building anywhere yet… ok, libproc-simple-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libproc-simple-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Apr 25 02:52:34 UTC 2025 I: starting to build libproc-simple-perl/trixie/arm64 on jenkins on '2025-04-25 02:52' Fri Apr 25 02:52:34 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_11/95523/console.log 1745549554 arm64 trixie libproc-simple-perl Fri Apr 25 02:52:34 UTC 2025 I: Downloading source for trixie/libproc-simple-perl=1.32-3 --2025-04-25 02:52:34-- http://deb.debian.org/debian/pool/main/libp/libproc-simple-perl/libproc-simple-perl_1.32-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2119 (2.1K) [text/prs.lines.tag] Saving to: ‘libproc-simple-perl_1.32-3.dsc’ 0K .. 100% 337M=0s 2025-04-25 02:52:34 (337 MB/s) - ‘libproc-simple-perl_1.32-3.dsc’ saved [2119/2119] --2025-04-25 02:52:34-- http://deb.debian.org/debian/pool/main/libp/libproc-simple-perl/libproc-simple-perl_1.32-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2119 (2.1K) [text/prs.lines.tag] Saving to: ‘libproc-simple-perl_1.32-3.dsc’ 0K .. 100% 337M=0s 2025-04-25 02:52:34 (337 MB/s) - ‘libproc-simple-perl_1.32-3.dsc’ saved [2119/2119] Fri Apr 25 02:52:34 UTC 2025 I: libproc-simple-perl_1.32-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libproc-simple-perl Binary: libproc-simple-perl Architecture: all Version: 1.32-3 Maintainer: Debian Perl Group Uploaders: Salvatore Bonaccorso Homepage: https://metacpan.org/release/Proc-Simple Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: perl Package-List: libproc-simple-perl deb perl optional arch=all Checksums-Sha1: 9930de79d5b6871094f797a313501d2267847cd8 15236 libproc-simple-perl_1.32.orig.tar.gz 3fee2fd871d27c79841b344f783c1c46dab6bfa3 3412 libproc-simple-perl_1.32-3.debian.tar.xz Checksums-Sha256: 4c8f0a924b19ad78a13da73fe0fb306d32a7b9d10a332c523087fc83a209a8c4 15236 libproc-simple-perl_1.32.orig.tar.gz 0e2f2fa86fd726b0ad20d08e4193d45e3947fc1e12c6566fdc6857112180f402 3412 libproc-simple-perl_1.32-3.debian.tar.xz Files: aa666815b9d9a86eff9e8a088fc30d1c 15236 libproc-simple-perl_1.32.orig.tar.gz fd317332c3416d3bc54f42ef23d0a1a2 3412 libproc-simple-perl_1.32-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNIQnIACgkQV5wWDUye I+iYIQ/+NYLC3xoluzBfNfI9dGR2V5Sx7C1Giy8NJtvqXjUHIesK6/ZgV4fQj0HG Gt+sdemUw8hOK6RIQL8QbZc91itMj4p0Z1mspiFa0eacxEmpsH2vkDqiAUhmhHb9 az+TxHj2MnuURXUVLOZQ3MnSn2o7Rw5ZQgw3jzYcC4QvE67Jnzqr9bzQz4fyUOIM apJpyq8520hUQdOIg32B4DfnAIPj7GNdFFitZ37L6TLig4dyw9CpHD4E1dffN/pM XUxep9R5MlupCxSHgdXQDvxoByUc4xbgrHVE/1uTK8RO7nC7EPLdc117SW26Byoi ECSK84DvZpsaeBZQGsTYmXgmyl1n/xjHlvkDZ1n1ijaYb5Bo4BdcLwD7YolbopYs 32osnw2ytK7ODv5XJstJ04HQfnPp6VwDmisRxr+S4ZS8YkN9QXSnkBSwHOGF0ivl G32b90c1I1Oib9KCrrCpftXZflFuP5HAr7+Zih7BJHvkh7o8GdUr1mljuf9jw7MQ 7u2CcghfyTDkClJ2uNlB2DwieO2yLdatWeZHxXun6eBdzPCinR+EO45jucnexC/6 XpGrSd6QbFpLeBvbNCmCCh6Btr6MlyqRuQHBcfgTvDzSKQH2PoDrPPV1hroUFNI+ nzqqQg/JRigC7KTSCJrTeF7A/ccNX/ZayUoKs27BNQY1rG51jpQ= =5iY+ -----END PGP SIGNATURE----- Fri Apr 25 02:52:34 UTC 2025 I: Checking whether the package is not for us Fri Apr 25 02:52:34 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Fri Apr 25 02:52:34 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Fri Apr 25 02:52:34 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Apr 25 02:52:34 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-0uLs4v' ==================================================================================== Fri Apr 25 02:52:35 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libproc-simple-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F 1.32-3" as arguments. Fri Apr 25 02:52:35 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-mmjVdiJL" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Apr 25 02:52:35 UTC 2025 I: Downloading source for trixie/libproc-simple-perl=1.32-3 Reading package lists... NOTICE: 'libproc-simple-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 20.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (dsc) [2119 B] Get:2 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (tar) [15.2 kB] Get:3 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (diff) [3412 B] Fetched 20.8 kB in 0s (365 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libproc-simple-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 20.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (dsc) [2119 B] Get:2 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (tar) [15.2 kB] Get:3 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (diff) [3412 B] Fetched 20.8 kB in 0s (365 kB/s) Download complete and in download only mode ============================================================================= Building libproc-simple-perl in trixie on arm64 on codethink04-arm64 now. Date: Fri Apr 25 03:52:36 BST 2025 Date UTC: Fri Apr 25 02:52:36 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 24 14:52:36 -12 2025 I: pbuilder-time-stamp: 1745549556 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libproc-simple-perl_1.32-3.dsc] I: copying [./libproc-simple-perl_1.32.orig.tar.gz] I: copying [./libproc-simple-perl_1.32-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libproc-simple-perl_1.32-3.dsc: unsupported subcommand dpkg-source: info: extracting libproc-simple-perl in libproc-simple-perl-1.32 dpkg-source: info: unpacking libproc-simple-perl_1.32.orig.tar.gz dpkg-source: info: unpacking libproc-simple-perl_1.32-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3371863/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b4d2b22c62324523bd1f7cecd63dab13' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3371863' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_q5wT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1 --logfile b1/build.log libproc-simple-perl_1.32-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3371863/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 10.9 MB of archives. After unpacking 44.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Fetched 10.9 MB in 0s (144 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libproc-simple-perl-1.32/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libproc-simple-perl_1.32-3_source.changes dpkg-buildpackage: info: source package libproc-simple-perl dpkg-buildpackage: info: source version 1.32-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-simple-perl-1.32=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-simple-perl-1.32=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Proc::Simple Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' cp Simple.pm blib/lib/Proc/Simple.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/destroy.t .... 1..5 ok 1 ok 2 ok 3 - check result ok 4 ok 5 ok t/esub.t ....... 1..3 ok 1 ok 2 ok 3 - the end ok t/exit.t ....... 1..1 ok 1 - stat 0 ok t/muarg.t ...... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/mult.t ....... 1..80 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok t/sh-c.t ....... 1..3 ok 1 - process is up ok 2 - process is down ok 3 - running file unlinked ok t/simple.t ..... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/stdouterr.t .. 1..2 ok 1 - hello stderr ok 2 - hello stdout ok t/time.t ....... 1..9 ok 1 - start ok 2 - process has exited ok 3 - wait_rc defined ok 4 - exit_rc defined ok 5 - t0 defined ok 6 - t1 defined ok 7 - t0-proc->t0 <= 2 ok 8 - t1-proc->t1 <= 2 ok 9 - eladiff <= 2 ok t/wait.t ....... 1..4 ok 1 - start ok 2 - process has exited ok 3 - wait_rc defined ok 4 - exit_rc defined ok All tests successful. Files=10, Tests=121, 14 wallclock secs ( 0.04 usr 0.02 sys + 0.70 cusr 0.19 csys = 0.95 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libproc-simple-perl/ make -j12 install DESTDIR=/build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' Manifying 1 pod document Installing /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/perl5/Proc/Simple.pm Installing /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/man/man3/Proc::Simple.3pm make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installexamples find /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/doc/libproc-simple-perl/examples -type f -print0 | \ xargs -r0 sed -i -e '1s|^#!/usr/local/bin/perl|#!/usr/bin/perl|' make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libproc-simple-perl' in '../libproc-simple-perl_1.32-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libproc-simple-perl_1.32-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libproc-simple-perl_1.32-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3371863 and its subdirectories I: Current time: Thu Apr 24 14:53:07 -12 2025 I: pbuilder-time-stamp: 1745549587 Fri Apr 25 02:53:07 UTC 2025 I: Signing ./b1/libproc-simple-perl_1.32-3_arm64.buildinfo as libproc-simple-perl_1.32-3_arm64.buildinfo.asc Fri Apr 25 02:53:07 UTC 2025 I: Signed ./b1/libproc-simple-perl_1.32-3_arm64.buildinfo as ./b1/libproc-simple-perl_1.32-3_arm64.buildinfo.asc Fri Apr 25 02:53:07 UTC 2025 - build #1 for libproc-simple-perl/trixie/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Fri Apr 25 02:53:07 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-mmjVdiJL, removing. /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 25 02:53 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 25 02:52 b2 -rw-r--r-- 1 jenkins jenkins 2119 Oct 13 2022 libproc-simple-perl_1.32-3.dsc -rw------- 1 jenkins jenkins 3307 Apr 25 02:52 rbuildlog.nW9C3li /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1: total 76 -rw-r--r-- 1 jenkins jenkins 20862 Apr 25 02:53 build.log -rw-r--r-- 1 jenkins jenkins 3412 Apr 25 02:53 libproc-simple-perl_1.32-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2119 Apr 25 02:53 libproc-simple-perl_1.32-3.dsc -rw-r--r-- 1 jenkins jenkins 17480 Apr 25 02:53 libproc-simple-perl_1.32-3_all.deb -rw-r--r-- 1 jenkins jenkins 4610 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5492 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1184 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1344 Apr 25 02:53 libproc-simple-perl_1.32-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2: total 0 Fri Apr 25 02:53:08 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 24 14:52:36 -12 2025 I: pbuilder-time-stamp: 1745549556 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libproc-simple-perl_1.32-3.dsc] I: copying [./libproc-simple-perl_1.32.orig.tar.gz] I: copying [./libproc-simple-perl_1.32-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libproc-simple-perl_1.32-3.dsc: unsupported subcommand dpkg-source: info: extracting libproc-simple-perl in libproc-simple-perl-1.32 dpkg-source: info: unpacking libproc-simple-perl_1.32.orig.tar.gz dpkg-source: info: unpacking libproc-simple-perl_1.32-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3371863/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b4d2b22c62324523bd1f7cecd63dab13' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3371863' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_q5wT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1 --logfile b1/build.log libproc-simple-perl_1.32-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3371863/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 10.9 MB of archives. After unpacking 44.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Fetched 10.9 MB in 0s (144 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libproc-simple-perl-1.32/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libproc-simple-perl_1.32-3_source.changes dpkg-buildpackage: info: source package libproc-simple-perl dpkg-buildpackage: info: source version 1.32-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-simple-perl-1.32=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-simple-perl-1.32=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Proc::Simple Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' cp Simple.pm blib/lib/Proc/Simple.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/destroy.t .... 1..5 ok 1 ok 2 ok 3 - check result ok 4 ok 5 ok t/esub.t ....... 1..3 ok 1 ok 2 ok 3 - the end ok t/exit.t ....... 1..1 ok 1 - stat 0 ok t/muarg.t ...... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/mult.t ....... 1..80 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok t/sh-c.t ....... 1..3 ok 1 - process is up ok 2 - process is down ok 3 - running file unlinked ok t/simple.t ..... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/stdouterr.t .. 1..2 ok 1 - hello stderr ok 2 - hello stdout ok t/time.t ....... 1..9 ok 1 - start ok 2 - process has exited ok 3 - wait_rc defined ok 4 - exit_rc defined ok 5 - t0 defined ok 6 - t1 defined ok 7 - t0-proc->t0 <= 2 ok 8 - t1-proc->t1 <= 2 ok 9 - eladiff <= 2 ok t/wait.t ....... 1..4 ok 1 - start ok 2 - process has exited ok 3 - wait_rc defined ok 4 - exit_rc defined ok All tests successful. Files=10, Tests=121, 14 wallclock secs ( 0.04 usr 0.02 sys + 0.70 cusr 0.19 csys = 0.95 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libproc-simple-perl/ make -j12 install DESTDIR=/build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' Manifying 1 pod document Installing /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/perl5/Proc/Simple.pm Installing /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/man/man3/Proc::Simple.3pm make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installexamples find /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/doc/libproc-simple-perl/examples -type f -print0 | \ xargs -r0 sed -i -e '1s|^#!/usr/local/bin/perl|#!/usr/bin/perl|' make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libproc-simple-perl' in '../libproc-simple-perl_1.32-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libproc-simple-perl_1.32-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libproc-simple-perl_1.32-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3371863 and its subdirectories I: Current time: Thu Apr 24 14:53:07 -12 2025 I: pbuilder-time-stamp: 1745549587 Fri Apr 25 02:53:08 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Apr 25 02:53:08 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Apr 25 02:53:08 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Apr 25 02:53:09 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-CurWy1' ==================================================================================== Thu May 28 09:16:09 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libproc-simple-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F 1.32-3" as arguments. Thu May 28 09:16:09 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-nsV9s1S1" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu May 28 09:16:09 UTC 2026 I: Downloading source for trixie/libproc-simple-perl=1.32-3 Reading package lists... NOTICE: 'libproc-simple-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 20.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (dsc) [2119 B] Get:2 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (tar) [15.2 kB] Get:3 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (diff) [3412 B] Fetched 20.8 kB in 0s (1350 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libproc-simple-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libproc-simple-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 20.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (dsc) [2119 B] Get:2 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (tar) [15.2 kB] Get:3 http://deb.debian.org/debian trixie/main libproc-simple-perl 1.32-3 (diff) [3412 B] Fetched 20.8 kB in 0s (1350 kB/s) Download complete and in download only mode ============================================================================= Re-Building libproc-simple-perl in trixie on arm64 on codethink03-arm64 now. Date: Thu May 28 10:16:10 BST 2026 Date UTC: Thu May 28 09:16:10 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_gNqT + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libproc-simple-perl = debian-installer -o libproc-simple-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libproc-simple-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_gNqT --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2 --logfile b2/build.log libproc-simple-perl_1.32-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu May 28 23:16:10 +14 2026 I: pbuilder-time-stamp: 1779959770 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libproc-simple-perl_1.32-3.dsc] I: copying [./libproc-simple-perl_1.32.orig.tar.gz] I: copying [./libproc-simple-perl_1.32-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libproc-simple-perl_1.32-3.dsc: unsupported subcommand dpkg-source: info: extracting libproc-simple-perl in libproc-simple-perl-1.32 dpkg-source: info: unpacking libproc-simple-perl_1.32.orig.tar.gz dpkg-source: info: unpacking libproc-simple-perl_1.32-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 May 28 09:16 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=44c4b88d04224a62a52e91c24aefbb41 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=4000332 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_gNqT --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2 --logfile b2/build.log libproc-simple-perl_1.32-3.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 10.9 MB of archives. After unpacking 44.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Fetched 10.9 MB in 0s (111 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libproc-simple-perl-1.32/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libproc-simple-perl_1.32-3_source.changes dpkg-buildpackage: info: source package libproc-simple-perl dpkg-buildpackage: info: source version 1.32-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-simple-perl-1.32=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libproc-simple-perl-1.32=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Proc::Simple Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' cp Simple.pm blib/lib/Proc/Simple.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/destroy.t .... 1..5 ok 1 ok 2 ok 3 - check result ok 4 ok 5 ok t/esub.t ....... 1..3 ok 1 ok 2 ok 3 - the end ok t/exit.t ....... 1..1 ok 1 - stat 0 ok t/muarg.t ...... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/mult.t ....... 1..80 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok t/sh-c.t ....... 1..3 ok 1 - process is up ok 2 - process is down ok 3 - running file unlinked ok t/simple.t ..... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/stdouterr.t .. 1..2 ok 1 - hello stderr ok 2 - hello stdout ok t/time.t ....... 1..9 ok 1 - start ok 2 - process has exited ok 3 - wait_rc defined ok 4 - exit_rc defined ok 5 - t0 defined ok 6 - t1 defined ok 7 - t0-proc->t0 <= 2 ok 8 - t1-proc->t1 <= 2 ok 9 - eladiff <= 2 ok t/wait.t ....... 1..4 ok 1 - start ok 2 - process has exited ok 3 - wait_rc defined ok 4 - exit_rc defined ok All tests successful. Files=10, Tests=121, 14 wallclock secs ( 0.07 usr 0.01 sys + 0.98 cusr 0.31 csys = 1.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libproc-simple-perl/ make -j12 install DESTDIR=/build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' Manifying 1 pod document Installing /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/perl5/Proc/Simple.pm Installing /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/man/man3/Proc::Simple.3pm make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installexamples find /build/reproducible-path/libproc-simple-perl-1.32/debian/libproc-simple-perl/usr/share/doc/libproc-simple-perl/examples -type f -print0 | \ xargs -r0 sed -i -e '1s|^#!/usr/local/bin/perl|#!/usr/bin/perl|' make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libproc-simple-perl' in '../libproc-simple-perl_1.32-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libproc-simple-perl_1.32-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libproc-simple-perl_1.32-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/4000332 and its subdirectories I: Current time: Thu May 28 23:16:48 +14 2026 I: pbuilder-time-stamp: 1779959808 + false + set +x Thu May 28 09:16:48 UTC 2026 I: Signing ./b2/libproc-simple-perl_1.32-3_arm64.buildinfo as libproc-simple-perl_1.32-3_arm64.buildinfo.asc Thu May 28 09:16:49 UTC 2026 I: Signed ./b2/libproc-simple-perl_1.32-3_arm64.buildinfo as ./b2/libproc-simple-perl_1.32-3_arm64.buildinfo.asc Thu May 28 09:16:49 UTC 2026 - build #2 for libproc-simple-perl/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu May 28 09:16:49 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-nsV9s1S1, removing. /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F: total 36 drwxr-xr-x 2 jenkins jenkins 4096 Apr 25 02:53 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 25 02:53 b2 -rw-r--r-- 1 jenkins jenkins 2119 Oct 13 2022 libproc-simple-perl_1.32-3.dsc -rw------- 1 jenkins jenkins 24470 Apr 25 02:53 rbuildlog.nW9C3li /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1: total 76 -rw-r--r-- 1 jenkins jenkins 20862 Apr 25 02:53 build.log -rw-r--r-- 1 jenkins jenkins 3412 Apr 25 02:53 libproc-simple-perl_1.32-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2119 Apr 25 02:53 libproc-simple-perl_1.32-3.dsc -rw-r--r-- 1 jenkins jenkins 17480 Apr 25 02:53 libproc-simple-perl_1.32-3_all.deb -rw-r--r-- 1 jenkins jenkins 4610 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5492 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1184 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1344 Apr 25 02:53 libproc-simple-perl_1.32-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2: total 76 -rw-r--r-- 1 jenkins jenkins 22805 Apr 25 02:53 build.log -rw-r--r-- 1 jenkins jenkins 3412 Apr 25 02:53 libproc-simple-perl_1.32-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2119 Apr 25 02:53 libproc-simple-perl_1.32-3.dsc -rw-r--r-- 1 jenkins jenkins 17480 Apr 25 02:53 libproc-simple-perl_1.32-3_all.deb -rw-r--r-- 1 jenkins jenkins 4610 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5492 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1184 Apr 25 02:53 libproc-simple-perl_1.32-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1344 Apr 25 02:53 libproc-simple-perl_1.32-3_source.changes Fri Apr 25 02:53:50 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Apr 25 02:53:51 UTC 2025 I: libproc-simple-perl_1.32-3_arm64.changes: Format: 1.8 Date: Thu, 13 Oct 2022 17:52:13 +0100 Source: libproc-simple-perl Binary: libproc-simple-perl Architecture: all Version: 1.32-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libproc-simple-perl - Perl interface to launch and control background processes Changes: libproc-simple-perl (1.32-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libproc-simple-perl: Add Multi-Arch: foreign. Checksums-Sha1: e4a81974b142ea07713c904e8332e92886f30b9d 17480 libproc-simple-perl_1.32-3_all.deb 6c43868b3efdc35568478d6b64fab1209247d81b 4610 libproc-simple-perl_1.32-3_arm64.buildinfo Checksums-Sha256: 84034cde05650b3ffaeaea87b08ecf9cd13575d3de05416ab7e32e39d39af84a 17480 libproc-simple-perl_1.32-3_all.deb 9e8a335e4a9a9e293ec96d6c5f691074d39c491df863cdae781502fd0180309e 4610 libproc-simple-perl_1.32-3_arm64.buildinfo Files: b97f1b37d70d8ee29c439ed2dc66a6fc 17480 perl optional libproc-simple-perl_1.32-3_all.deb 255b891aa920c95663942d8153c7b52b 4610 perl optional libproc-simple-perl_1.32-3_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libproc-simple-perl_1.32-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libproc-simple-perl_1.32-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libproc-simple-perl_1.32-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libproc-simple-perl_1.32-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libproc-simple-perl_1.32-3_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libproc-simple-perl_1.32-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-25 02:53:08.149791823 +0000 +++ b2/build.log 2025-04-25 02:53:50.800894415 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Apr 24 14:52:36 -12 2025 -I: pbuilder-time-stamp: 1745549556 +I: Current time: Thu May 28 23:16:10 +14 2026 +I: pbuilder-time-stamp: 1779959770 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -22,52 +22,84 @@ dpkg-source: info: unpacking libproc-simple-perl_1.32-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3371863/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 May 28 09:16 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='b4d2b22c62324523bd1f7cecd63dab13' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3371863' - PS1='# ' - PS2='> ' + INVOCATION_ID=44c4b88d04224a62a52e91c24aefbb41 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=4000332 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_q5wT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1 --logfile b1/build.log libproc-simple-perl_1.32-3.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/pbuilderrc_gNqT --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2 --logfile b2/build.log libproc-simple-perl_1.32-3.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3371863/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -132,7 +164,7 @@ Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] -Fetched 10.9 MB in 0s (144 MB/s) +Fetched 10.9 MB in 0s (111 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) @@ -268,7 +300,11 @@ fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libproc-simple-perl-1.32/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libproc-simple-perl_1.32-3_source.changes +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libproc-simple-perl-1.32/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libproc-simple-perl_1.32-3_source.changes dpkg-buildpackage: info: source package libproc-simple-perl dpkg-buildpackage: info: source version 1.32-3 dpkg-buildpackage: info: source distribution unstable @@ -451,7 +487,7 @@ ok 4 - exit_rc defined ok All tests successful. -Files=10, Tests=121, 14 wallclock secs ( 0.04 usr 0.02 sys + 0.70 cusr 0.19 csys = 0.95 CPU) +Files=10, Tests=121, 14 wallclock secs ( 0.07 usr 0.01 sys + 0.98 cusr 0.31 csys = 1.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libproc-simple-perl-1.32' create-stamp debian/debhelper-build-stamp @@ -490,12 +526,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/4000332/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3371863 and its subdirectories -I: Current time: Thu Apr 24 14:53:07 -12 2025 -I: pbuilder-time-stamp: 1745549587 +I: removing directory /srv/workspace/pbuilder/4000332 and its subdirectories +I: Current time: Thu May 28 23:16:48 +14 2026 +I: pbuilder-time-stamp: 1779959808 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libproc-simple-perl_1.32-3.diff: 66.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libproc-simple-perl_1.32-3.diff.gz b2/build.log: 72.7% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.5% -- replaced with stdout Fri Apr 25 02:53:52 UTC 2025 I: diffoscope 294 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libproc-simple-perl_trixie_arm64_1745549632 + touch /var/log/reproducible-builds/diffoscope_stamp_libproc-simple-perl_trixie_arm64_1745549632 + RESULT=0 + systemd-run '--description=diffoscope on libproc-simple-perl/1.32-3 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_11-95523 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F --run-session -c jenkins-reproducible-trixie-diffoscope-198272e4-0953-477c-b4e1-17de73926dc1 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/dbd-tmp-DgvLd0E ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/libproc-simple-perl_1.32-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/libproc-simple-perl_1.32-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/libproc-simple-perl_1.32-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1/libproc-simple-perl_1.32-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2/libproc-simple-perl_1.32-3_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_11-95523.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/libproc-simple-perl_1.32-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/libproc-simple-perl_1.32-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/libproc-simple-perl_1.32-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b1/libproc-simple-perl_1.32-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.lwUviv7F/b2/libproc-simple-perl_1.32-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 257ms CPU time consumed: 259ms _ _ _ _ _ | (_) |__ _ __ _ __ ___ ___ ___(_)_ __ ___ _ __ | | ___ _ __ | | | '_ \| '_ \| '__/ _ \ / __|____/ __| | '_ ` _ \| '_ \| |/ _ \_____| '_ \ | | | |_) | |_) | | | (_) | (_|_____\__ \ | | | | | | |_) | | __/_____| |_) | |_|_|_.__/| .__/|_| \___/ \___| |___/_|_| |_| |_| .__/|_|\___| | .__/ |_| |_| |_| _ ___ _ __| | / _ \ '__| | | __/ | | | \___|_| |_| Fri Apr 25 02:53:53 UTC 2025 I: diffoscope 294 found no differences in the changes files, and a .buildinfo file also exists. Fri Apr 25 02:53:53 UTC 2025 I: libproc-simple-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-25 02:53:53] INFO: Starting at 2025-04-25 02:53:53.821997 [2025-04-25 02:53:53] INFO: Generating the pages of 1 package(s) [2025-04-25 02:53:54] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libproc-simple-perl didn't produce a buildlog, even though it has been built. [2025-04-25 02:53:54] INFO: Finished at 2025-04-25 02:53:54.241415, took: 0:00:00.419423 Fri Apr 25 02:53:54 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libproc-simple-perl.html Fri Apr 25 02:53:54 UTC 2025 I: Submitting .buildinfo files to external archives: Fri Apr 25 02:53:54 UTC 2025 I: Submitting 8.0K b1/libproc-simple-perl_1.32-3_arm64.buildinfo.asc Fri Apr 25 02:54:24 UTC 2025 E: Could not submit buildinfo from b1 to http://buildinfo.debian.net/api/submit Fri Apr 25 02:54:24 UTC 2025 I: Submitting 8.0K b2/libproc-simple-perl_1.32-3_arm64.buildinfo.asc https://buildinfo.debian.net/aa9f09e008393fbdfcfe9bdde7795f480e8a3081/libproc-simple-perl_1.32-3_all Fri Apr 25 02:54:45 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Apr 25 02:54:45 UTC 2025 I: Done submitting .buildinfo files. Fri Apr 25 02:54:45 UTC 2025 I: Removing signed libproc-simple-perl_1.32-3_arm64.buildinfo.asc files: removed './b1/libproc-simple-perl_1.32-3_arm64.buildinfo.asc' removed './b2/libproc-simple-perl_1.32-3_arm64.buildinfo.asc' 1745549685 arm64 trixie libproc-simple-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libproc-simple-perl_1.32-3.rbuild.log: 70.8% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libproc-simple-perl_1.32-3.rbuild.log.gz [2025-04-25 02:54:45] INFO: Starting at 2025-04-25 02:54:45.988924 [2025-04-25 02:54:46] INFO: Generating the pages of 1 package(s) [2025-04-25 02:54:46] INFO: Finished at 2025-04-25 02:54:46.405303, took: 0:00:00.416392 All cleanup done. Fri Apr 25 02:54:46 UTC 2025 - total duration: 0h 1m 36s. Fri Apr 25 02:54:46 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-A7vHFWub, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 28.793s CPU time consumed: 6.958s