Running as unit: rb-build-arm64_11-95788.service ==================================================================================== Sat Apr 26 02:40:05 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_11) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Sat Apr 26 02:40:05 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-ejHomIdd" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Apr 26 02:40:05 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Sat Apr 26 02:40:05 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-MOLHlV' Sat Apr 26 02:40:06 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Sat Apr 26 02:40:06 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-saeySd' ok, let's check if libterm-sk-perl is building anywhere yet… ok, libterm-sk-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libterm-sk-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Sat Apr 26 02:40:26 UTC 2025 I: starting to build libterm-sk-perl/trixie/arm64 on jenkins on '2025-04-26 02:40' Sat Apr 26 02:40:26 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_11/95788/console.log 1745635226 arm64 trixie libterm-sk-perl Sat Apr 26 02:40:26 UTC 2025 I: Downloading source for trixie/libterm-sk-perl=0.18-3 --2025-04-26 02:40:26-- http://deb.debian.org/debian/pool/main/libt/libterm-sk-perl/libterm-sk-perl_0.18-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2019 (2.0K) [text/prs.lines.tag] Saving to: ‘libterm-sk-perl_0.18-3.dsc’ 0K . 100% 232M=0s 2025-04-26 02:40:26 (232 MB/s) - ‘libterm-sk-perl_0.18-3.dsc’ saved [2019/2019] --2025-04-26 02:40:26-- http://deb.debian.org/debian/pool/main/libt/libterm-sk-perl/libterm-sk-perl_0.18-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2019 (2.0K) [text/prs.lines.tag] Saving to: ‘libterm-sk-perl_0.18-3.dsc’ 0K . 100% 232M=0s 2025-04-26 02:40:26 (232 MB/s) - ‘libterm-sk-perl_0.18-3.dsc’ saved [2019/2019] Sat Apr 26 02:40:26 UTC 2025 I: libterm-sk-perl_0.18-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libterm-sk-perl Binary: libterm-sk-perl Architecture: all Version: 0.18-3 Maintainer: Debian Perl Group Homepage: https://metacpan.org/release/Term-Sk Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: perl Package-List: libterm-sk-perl deb perl optional arch=all Checksums-Sha1: a1fd0591bbcd9b32abc56ad1a10108281c4507c4 18491 libterm-sk-perl_0.18.orig.tar.gz 415189a9330a65e763a6301f6ef5892824ba7d3d 2636 libterm-sk-perl_0.18-3.debian.tar.xz Checksums-Sha256: f2e491796061205b08688802b287792d7d803b08972339fb1070ba05612af885 18491 libterm-sk-perl_0.18.orig.tar.gz 8575fe52684ac4d932689cc06b11cc294b8552b54e82a6278443716543f3b625 2636 libterm-sk-perl_0.18-3.debian.tar.xz Files: 18834e4acac7b766bc7f5d68a3dbff28 18491 libterm-sk-perl_0.18.orig.tar.gz a3dac28444cb34950a81e3dfcda80377 2636 libterm-sk-perl_0.18-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNIkJEACgkQV5wWDUye I+hodQ//aPHRGK/Rxve1QzQHMwdDwHol7W2giR2npvtHo8/0MZuYTBwoRRo2PN1R 4Yo1xjTyKnV4YTijStj/sCV2WMlab7xJ3+c0ldTJ2p6iJWhRC+kSq71q4qrO8iqt Ac5ga89LsvyBmGP9PzNyaOXGcR3dU+0SEyYFp8q+9tpR/w7m7+hWYx8zCV9wARQL 1hj10HrvLuoXOCZQsEe1y0jFdPWdcwpPb0IsJ4IV71SVyZmvIadTPT/SBISFvqfk k7liNXQ1VBaFsselsjSjZP1Sl5h7f/S92F31u8mRirDhdfhyZaj3dykh0hghjjMI gAKAZWZbPYc9V3fW5ZwwFlwAvEpF15yllOehvQeH16gCOzoE7lkGNN2+Vo7IylBR GbLic/I3xQxBCgItwgq1HwXCnPUqDrV+fCbzHUIFgd5oL2OX47IoRZgKGgc0MY/r z1yj17qAwLmu2ZRxPXJzV4JkZjghsek4YVnAQawi0k062nF414wmu3EcipKrnOSS uXdISjmV2Ze9rUQYzKDZIcs2bji5j39EbnOafAEJdFdlbtqBpupQT4MM6RUVGOtX tFV24XX0qAU/FJU7kHmXD8qZrL+0l5JyRToFX8nQPiRQlRuTohmvyoCn0XaaL+bO ezrrt/vRzMAQxFIfaTQ2eyGodEt8VuSHLtPtB/ldw7s1mOdoL7A= =ZOn3 -----END PGP SIGNATURE----- Sat Apr 26 02:40:26 UTC 2025 I: Checking whether the package is not for us Sat Apr 26 02:40:26 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Sat Apr 26 02:40:26 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Sat Apr 26 02:40:26 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Sat Apr 26 02:40:26 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-XvdvF0' ==================================================================================== Sat Apr 26 02:40:28 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libterm-sk-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt 0.18-3" as arguments. Sat Apr 26 02:40:28 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-OPjm7C1d" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Apr 26 02:40:28 UTC 2025 I: Downloading source for trixie/libterm-sk-perl=0.18-3 Reading package lists... NOTICE: 'libterm-sk-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (dsc) [2019 B] Get:2 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (tar) [18.5 kB] Get:3 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (diff) [2636 B] Fetched 23.1 kB in 0s (136 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libterm-sk-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (dsc) [2019 B] Get:2 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (tar) [18.5 kB] Get:3 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (diff) [2636 B] Fetched 23.1 kB in 0s (136 kB/s) Download complete and in download only mode ============================================================================= Building libterm-sk-perl in trixie on arm64 on codethink04-arm64 now. Date: Sat Apr 26 03:40:28 BST 2025 Date UTC: Sat Apr 26 02:40:28 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Apr 25 14:40:29 -12 2025 I: pbuilder-time-stamp: 1745635229 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libterm-sk-perl_0.18-3.dsc] I: copying [./libterm-sk-perl_0.18.orig.tar.gz] I: copying [./libterm-sk-perl_0.18-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libterm-sk-perl_0.18-3.dsc: unsupported subcommand dpkg-source: info: extracting libterm-sk-perl in libterm-sk-perl-0.18 dpkg-source: info: unpacking libterm-sk-perl_0.18.orig.tar.gz dpkg-source: info: unpacking libterm-sk-perl_0.18-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2285937/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='347a1dcb84f243638cd6c4682858214e' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2285937' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_u5j0 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1 --logfile b1/build.log libterm-sk-perl_0.18-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2285937/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 10.9 MB of archives. After unpacking 44.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Fetched 10.9 MB in 0s (206 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libterm-sk-perl-0.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libterm-sk-perl_0.18-3_source.changes dpkg-buildpackage: info: source package libterm-sk-perl dpkg-buildpackage: info: source version 0.18-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libterm-sk-perl-0.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libterm-sk-perl-0.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Term::Sk Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' cp lib/Term/Sk.pm blib/lib/Term/Sk.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/0010_test.t ........... 1..78 ok 1 - use Term::Sk; ok 2 - Test-0010: standard counter works ok ok 3 - Test-0020: invalid id aborts ok ok 4 - Test-0030: with errorcode 100 ok 5 - Test-0040: and error message Can't parse ok 6 - Test-0050: unknown id aborts ok ok 7 - Test-0060: with errorcode 110 ok 8 - Test-0070: and error message invalid display-code ok 9 - Test-0080: %d works ok ok 10 - Test-0090: first displays - ok 11 - Test-0100: then displays \ ok 12 - Test-0110: then displays | ok 13 - Test-0120: then displays / ok 14 - Test-0125: %t works ok ok 15 - Test-0130: and displays the time elapsed ok 16 - Test-0140: %b works ok ok 17 - Test-0150: always use hash for progress bar ok 18 - Test-0160: %p works ok ok 19 - Test-0170: and displays 25% after a quarter of it's way ok 20 - Test-0180: %P (in captital letters) works ok ok 21 - Test-0190: and displays a percent symbol ok 22 - Test-0200: %c works ok ok 23 - Test-0210: and displays the correct counter value ok 24 - Test-0220: %m works ok ok 25 - Test-0230: and displays the correct target value ok 26 - Test-0240: Simple fixed text works ok ok 27 - Test-0250: and whisper() works as expected ok 28 - Test-0260: Simple fixed text works ok ok 29 - Test-0270: and close() works as expected ok 30 - Test-0280: %c works ok ok 31 - Test-0290: number of ticks are correct ok 32 - Test-0300: %2c of %2m works ok ok 33 - Test-0310: first number %2c of %2m displayed correctly ok 34 - Test-0320: second number %2c of %2m displayed correctly ok 35 - Test-0330: third number %2c of %2m displayed correctly ok 36 - Test-0340: %c of %m works ok ok 37 - Test-0350: first number %c of %m displayed correctly ok 38 - Test-0360: %c of %m works ok ok 39 - Test-0370: first number %c of %m displayed correctly ok 40 - Test-0380: %c of %m works ok ok 41 - Test-0390: first number %c of %m displayed correctly ok 42 - Test-0400: %c of %m works ok ok 43 - Test-0410: first number %c of %m displayed correctly ok 44 - Test-0420: %c of %m works ok ok 45 - Test-0430: first number %c of %m displayed correctly ok 46 - Test-0440: %c of %m works ok ok 47 - Test-0450: first number %c of %m displayed correctly ok 48 - Test-0460: fails ok ok 49 - Test-0470: error message ok 50 - Test-0480: backspaces have been removed ok 51 - Test-0540: length abcde (200,15) ok 52 - Test-0560: trailing characters for abcde (200,15) ok 53 - Test-0590: commify sub works ok ok 54 - Test-0600: show commified numbers ok 55 - Test-0610: %6k %c works ok ok 56 - Test-0620: first Token displayed correctly ok 57 - Test-0630: second Token displayed correctly ok 58 - Test-0632: third Token displayed correctly ok 59 - Test-0640: %8t %c works ok ok 60 - Test-0650: first Time displayed correctly ok 61 - Test-0660: second Time displayed correctly ok 62 - Test-0670: %8t %d %c works ok ok 63 - Test-0680: first Time displayed correctly ok 64 - Test-0690: second Time displayed, dash has not changed ok 65 - Test-0700: third Time displayed, dash has changed ok 66 - Test-0710: fourth Time displayed, Time and dash have changed ok 67 - Test-0720: before rem_backspace ok 68 - Test-0730: after rem_backspace ok 69 - Test-0740: %6k %6k %c works ok ok 70 - Test-0750: first double Token displayed correctly ok 71 - Test-0760: second double Token displayed correctly ok 72 - Test-0770: %t works ok ok 73 - Test-0780: first time displays "00:00" ok 74 - Test-0790: second time displays "00:23" ok 75 - Test-0800: %c works ok ok 76 - Test-0810: mute_on works ok ok 77 - Test-0820: mute_off works ok ok 78 - Test-0830: mute_zzz fails ok t/release-pod-syntax.t .. skipped: these tests are for release candidate testing All tests successful. Files=2, Tests=78, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.13 cusr 0.03 csys = 0.20 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libterm-sk-perl/ make -j12 install DESTDIR=/build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' Manifying 1 pod document Installing /build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl/usr/share/perl5/Term/Sk.pm Installing /build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl/usr/share/man/man3/Term::Sk.3pm make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libterm-sk-perl' in '../libterm-sk-perl_0.18-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libterm-sk-perl_0.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libterm-sk-perl_0.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2285937 and its subdirectories I: Current time: Fri Apr 25 14:40:49 -12 2025 I: pbuilder-time-stamp: 1745635249 Sat Apr 26 02:40:49 UTC 2025 I: Signing ./b1/libterm-sk-perl_0.18-3_arm64.buildinfo as libterm-sk-perl_0.18-3_arm64.buildinfo.asc Sat Apr 26 02:40:49 UTC 2025 I: Signed ./b1/libterm-sk-perl_0.18-3_arm64.buildinfo as ./b1/libterm-sk-perl_0.18-3_arm64.buildinfo.asc Sat Apr 26 02:40:49 UTC 2025 - build #1 for libterm-sk-perl/trixie/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Sat Apr 26 02:40:49 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-OPjm7C1d, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 26 02:40 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 26 02:40 b2 -rw-r--r-- 1 jenkins jenkins 2019 Oct 13 2022 libterm-sk-perl_0.18-3.dsc -rw------- 1 jenkins jenkins 3179 Apr 26 02:40 rbuildlog.BGlELFB /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1: total 72 -rw-r--r-- 1 jenkins jenkins 22659 Apr 26 02:40 build.log -rw-r--r-- 1 jenkins jenkins 2636 Apr 26 02:40 libterm-sk-perl_0.18-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2019 Apr 26 02:40 libterm-sk-perl_0.18-3.dsc -rw-r--r-- 1 jenkins jenkins 14264 Apr 26 02:40 libterm-sk-perl_0.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 4588 Apr 26 02:40 libterm-sk-perl_0.18-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5470 Apr 26 02:40 libterm-sk-perl_0.18-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1147 Apr 26 02:40 libterm-sk-perl_0.18-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1296 Apr 26 02:40 libterm-sk-perl_0.18-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2: total 0 Sat Apr 26 02:40:50 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Apr 25 14:40:29 -12 2025 I: pbuilder-time-stamp: 1745635229 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libterm-sk-perl_0.18-3.dsc] I: copying [./libterm-sk-perl_0.18.orig.tar.gz] I: copying [./libterm-sk-perl_0.18-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libterm-sk-perl_0.18-3.dsc: unsupported subcommand dpkg-source: info: extracting libterm-sk-perl in libterm-sk-perl-0.18 dpkg-source: info: unpacking libterm-sk-perl_0.18.orig.tar.gz dpkg-source: info: unpacking libterm-sk-perl_0.18-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2285937/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='347a1dcb84f243638cd6c4682858214e' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2285937' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_u5j0 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1 --logfile b1/build.log libterm-sk-perl_0.18-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2285937/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 10.9 MB of archives. After unpacking 44.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Fetched 10.9 MB in 0s (206 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libterm-sk-perl-0.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libterm-sk-perl_0.18-3_source.changes dpkg-buildpackage: info: source package libterm-sk-perl dpkg-buildpackage: info: source version 0.18-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libterm-sk-perl-0.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libterm-sk-perl-0.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Term::Sk Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' cp lib/Term/Sk.pm blib/lib/Term/Sk.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/0010_test.t ........... 1..78 ok 1 - use Term::Sk; ok 2 - Test-0010: standard counter works ok ok 3 - Test-0020: invalid id aborts ok ok 4 - Test-0030: with errorcode 100 ok 5 - Test-0040: and error message Can't parse ok 6 - Test-0050: unknown id aborts ok ok 7 - Test-0060: with errorcode 110 ok 8 - Test-0070: and error message invalid display-code ok 9 - Test-0080: %d works ok ok 10 - Test-0090: first displays - ok 11 - Test-0100: then displays \ ok 12 - Test-0110: then displays | ok 13 - Test-0120: then displays / ok 14 - Test-0125: %t works ok ok 15 - Test-0130: and displays the time elapsed ok 16 - Test-0140: %b works ok ok 17 - Test-0150: always use hash for progress bar ok 18 - Test-0160: %p works ok ok 19 - Test-0170: and displays 25% after a quarter of it's way ok 20 - Test-0180: %P (in captital letters) works ok ok 21 - Test-0190: and displays a percent symbol ok 22 - Test-0200: %c works ok ok 23 - Test-0210: and displays the correct counter value ok 24 - Test-0220: %m works ok ok 25 - Test-0230: and displays the correct target value ok 26 - Test-0240: Simple fixed text works ok ok 27 - Test-0250: and whisper() works as expected ok 28 - Test-0260: Simple fixed text works ok ok 29 - Test-0270: and close() works as expected ok 30 - Test-0280: %c works ok ok 31 - Test-0290: number of ticks are correct ok 32 - Test-0300: %2c of %2m works ok ok 33 - Test-0310: first number %2c of %2m displayed correctly ok 34 - Test-0320: second number %2c of %2m displayed correctly ok 35 - Test-0330: third number %2c of %2m displayed correctly ok 36 - Test-0340: %c of %m works ok ok 37 - Test-0350: first number %c of %m displayed correctly ok 38 - Test-0360: %c of %m works ok ok 39 - Test-0370: first number %c of %m displayed correctly ok 40 - Test-0380: %c of %m works ok ok 41 - Test-0390: first number %c of %m displayed correctly ok 42 - Test-0400: %c of %m works ok ok 43 - Test-0410: first number %c of %m displayed correctly ok 44 - Test-0420: %c of %m works ok ok 45 - Test-0430: first number %c of %m displayed correctly ok 46 - Test-0440: %c of %m works ok ok 47 - Test-0450: first number %c of %m displayed correctly ok 48 - Test-0460: fails ok ok 49 - Test-0470: error message ok 50 - Test-0480: backspaces have been removed ok 51 - Test-0540: length abcde (200,15) ok 52 - Test-0560: trailing characters for abcde (200,15) ok 53 - Test-0590: commify sub works ok ok 54 - Test-0600: show commified numbers ok 55 - Test-0610: %6k %c works ok ok 56 - Test-0620: first Token displayed correctly ok 57 - Test-0630: second Token displayed correctly ok 58 - Test-0632: third Token displayed correctly ok 59 - Test-0640: %8t %c works ok ok 60 - Test-0650: first Time displayed correctly ok 61 - Test-0660: second Time displayed correctly ok 62 - Test-0670: %8t %d %c works ok ok 63 - Test-0680: first Time displayed correctly ok 64 - Test-0690: second Time displayed, dash has not changed ok 65 - Test-0700: third Time displayed, dash has changed ok 66 - Test-0710: fourth Time displayed, Time and dash have changed ok 67 - Test-0720: before rem_backspace ok 68 - Test-0730: after rem_backspace ok 69 - Test-0740: %6k %6k %c works ok ok 70 - Test-0750: first double Token displayed correctly ok 71 - Test-0760: second double Token displayed correctly ok 72 - Test-0770: %t works ok ok 73 - Test-0780: first time displays "00:00" ok 74 - Test-0790: second time displays "00:23" ok 75 - Test-0800: %c works ok ok 76 - Test-0810: mute_on works ok ok 77 - Test-0820: mute_off works ok ok 78 - Test-0830: mute_zzz fails ok t/release-pod-syntax.t .. skipped: these tests are for release candidate testing All tests successful. Files=2, Tests=78, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.13 cusr 0.03 csys = 0.20 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libterm-sk-perl/ make -j12 install DESTDIR=/build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' Manifying 1 pod document Installing /build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl/usr/share/perl5/Term/Sk.pm Installing /build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl/usr/share/man/man3/Term::Sk.3pm make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libterm-sk-perl' in '../libterm-sk-perl_0.18-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libterm-sk-perl_0.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libterm-sk-perl_0.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2285937 and its subdirectories I: Current time: Fri Apr 25 14:40:49 -12 2025 I: pbuilder-time-stamp: 1745635249 Sat Apr 26 02:40:51 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Sat Apr 26 02:40:51 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Sat Apr 26 02:40:51 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Sat Apr 26 02:40:51 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-GIN8No' ==================================================================================== Fri May 29 09:03:52 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libterm-sk-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt 0.18-3" as arguments. Fri May 29 09:03:52 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-SNZuiOt3" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri May 29 09:03:52 UTC 2026 I: Downloading source for trixie/libterm-sk-perl=0.18-3 Reading package lists... NOTICE: 'libterm-sk-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (dsc) [2019 B] Get:2 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (tar) [18.5 kB] Get:3 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (diff) [2636 B] Fetched 23.1 kB in 0s (973 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libterm-sk-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libterm-sk-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (dsc) [2019 B] Get:2 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (tar) [18.5 kB] Get:3 http://deb.debian.org/debian trixie/main libterm-sk-perl 0.18-3 (diff) [2636 B] Fetched 23.1 kB in 0s (973 kB/s) Download complete and in download only mode ============================================================================= Re-Building libterm-sk-perl in trixie on arm64 on codethink03-arm64 now. Date: Fri May 29 10:03:52 BST 2026 Date UTC: Fri May 29 09:03:52 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_EgPX + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libterm-sk-perl = debian-installer -o libterm-sk-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libterm-sk-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_EgPX --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2 --logfile b2/build.log libterm-sk-perl_0.18-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri May 29 23:03:52 +14 2026 I: pbuilder-time-stamp: 1780045432 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libterm-sk-perl_0.18-3.dsc] I: copying [./libterm-sk-perl_0.18.orig.tar.gz] I: copying [./libterm-sk-perl_0.18-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libterm-sk-perl_0.18-3.dsc: unsupported subcommand dpkg-source: info: extracting libterm-sk-perl in libterm-sk-perl-0.18 dpkg-source: info: unpacking libterm-sk-perl_0.18.orig.tar.gz dpkg-source: info: unpacking libterm-sk-perl_0.18-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 May 29 09:03 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=407039a77d5141888321d1cb44a0d488 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=3852629 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_EgPX --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2 --logfile b2/build.log libterm-sk-perl_0.18-3.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 10.9 MB of archives. After unpacking 44.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.41-4 [93.9 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-7 [285 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.4 [629 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] Fetched 10.9 MB in 0s (117 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_arm64.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_arm64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_arm64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libterm-sk-perl-0.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libterm-sk-perl_0.18-3_source.changes dpkg-buildpackage: info: source package libterm-sk-perl dpkg-buildpackage: info: source version 0.18-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libterm-sk-perl-0.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libterm-sk-perl-0.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Term::Sk Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' cp lib/Term/Sk.pm blib/lib/Term/Sk.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/0010_test.t ........... 1..78 ok 1 - use Term::Sk; ok 2 - Test-0010: standard counter works ok ok 3 - Test-0020: invalid id aborts ok ok 4 - Test-0030: with errorcode 100 ok 5 - Test-0040: and error message Can't parse ok 6 - Test-0050: unknown id aborts ok ok 7 - Test-0060: with errorcode 110 ok 8 - Test-0070: and error message invalid display-code ok 9 - Test-0080: %d works ok ok 10 - Test-0090: first displays - ok 11 - Test-0100: then displays \ ok 12 - Test-0110: then displays | ok 13 - Test-0120: then displays / ok 14 - Test-0125: %t works ok ok 15 - Test-0130: and displays the time elapsed ok 16 - Test-0140: %b works ok ok 17 - Test-0150: always use hash for progress bar ok 18 - Test-0160: %p works ok ok 19 - Test-0170: and displays 25% after a quarter of it's way ok 20 - Test-0180: %P (in captital letters) works ok ok 21 - Test-0190: and displays a percent symbol ok 22 - Test-0200: %c works ok ok 23 - Test-0210: and displays the correct counter value ok 24 - Test-0220: %m works ok ok 25 - Test-0230: and displays the correct target value ok 26 - Test-0240: Simple fixed text works ok ok 27 - Test-0250: and whisper() works as expected ok 28 - Test-0260: Simple fixed text works ok ok 29 - Test-0270: and close() works as expected ok 30 - Test-0280: %c works ok ok 31 - Test-0290: number of ticks are correct ok 32 - Test-0300: %2c of %2m works ok ok 33 - Test-0310: first number %2c of %2m displayed correctly ok 34 - Test-0320: second number %2c of %2m displayed correctly ok 35 - Test-0330: third number %2c of %2m displayed correctly ok 36 - Test-0340: %c of %m works ok ok 37 - Test-0350: first number %c of %m displayed correctly ok 38 - Test-0360: %c of %m works ok ok 39 - Test-0370: first number %c of %m displayed correctly ok 40 - Test-0380: %c of %m works ok ok 41 - Test-0390: first number %c of %m displayed correctly ok 42 - Test-0400: %c of %m works ok ok 43 - Test-0410: first number %c of %m displayed correctly ok 44 - Test-0420: %c of %m works ok ok 45 - Test-0430: first number %c of %m displayed correctly ok 46 - Test-0440: %c of %m works ok ok 47 - Test-0450: first number %c of %m displayed correctly ok 48 - Test-0460: fails ok ok 49 - Test-0470: error message ok 50 - Test-0480: backspaces have been removed ok 51 - Test-0540: length abcde (200,15) ok 52 - Test-0560: trailing characters for abcde (200,15) ok 53 - Test-0590: commify sub works ok ok 54 - Test-0600: show commified numbers ok 55 - Test-0610: %6k %c works ok ok 56 - Test-0620: first Token displayed correctly ok 57 - Test-0630: second Token displayed correctly ok 58 - Test-0632: third Token displayed correctly ok 59 - Test-0640: %8t %c works ok ok 60 - Test-0650: first Time displayed correctly ok 61 - Test-0660: second Time displayed correctly ok 62 - Test-0670: %8t %d %c works ok ok 63 - Test-0680: first Time displayed correctly ok 64 - Test-0690: second Time displayed, dash has not changed ok 65 - Test-0700: third Time displayed, dash has changed ok 66 - Test-0710: fourth Time displayed, Time and dash have changed ok 67 - Test-0720: before rem_backspace ok 68 - Test-0730: after rem_backspace ok 69 - Test-0740: %6k %6k %c works ok ok 70 - Test-0750: first double Token displayed correctly ok 71 - Test-0760: second double Token displayed correctly ok 72 - Test-0770: %t works ok ok 73 - Test-0780: first time displays "00:00" ok 74 - Test-0790: second time displays "00:23" ok 75 - Test-0800: %c works ok ok 76 - Test-0810: mute_on works ok ok 77 - Test-0820: mute_off works ok ok 78 - Test-0830: mute_zzz fails ok t/release-pod-syntax.t .. skipped: these tests are for release candidate testing All tests successful. Files=2, Tests=78, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.09 cusr 0.02 csys = 0.13 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libterm-sk-perl/ make -j12 install DESTDIR=/build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libterm-sk-perl-0.18' Manifying 1 pod document Installing /build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl/usr/share/perl5/Term/Sk.pm Installing /build/reproducible-path/libterm-sk-perl-0.18/debian/libterm-sk-perl/usr/share/man/man3/Term::Sk.3pm make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libterm-sk-perl' in '../libterm-sk-perl_0.18-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libterm-sk-perl_0.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libterm-sk-perl_0.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3852629 and its subdirectories I: Current time: Fri May 29 23:04:16 +14 2026 I: pbuilder-time-stamp: 1780045456 + false + set +x Fri May 29 09:04:16 UTC 2026 I: Signing ./b2/libterm-sk-perl_0.18-3_arm64.buildinfo as libterm-sk-perl_0.18-3_arm64.buildinfo.asc Fri May 29 09:04:16 UTC 2026 I: Signed ./b2/libterm-sk-perl_0.18-3_arm64.buildinfo as ./b2/libterm-sk-perl_0.18-3_arm64.buildinfo.asc Fri May 29 09:04:17 UTC 2026 - build #2 for libterm-sk-perl/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Fri May 29 09:04:17 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-SNZuiOt3, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Apr 26 02:40 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 26 02:41 b2 -rw-r--r-- 1 jenkins jenkins 2019 Oct 13 2022 libterm-sk-perl_0.18-3.dsc -rw------- 1 jenkins jenkins 26139 Apr 26 02:40 rbuildlog.BGlELFB /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1: total 72 -rw-r--r-- 1 jenkins jenkins 22659 Apr 26 02:40 build.log -rw-r--r-- 1 jenkins jenkins 2636 Apr 26 02:40 libterm-sk-perl_0.18-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2019 Apr 26 02:40 libterm-sk-perl_0.18-3.dsc -rw-r--r-- 1 jenkins jenkins 14264 Apr 26 02:40 libterm-sk-perl_0.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 4588 Apr 26 02:40 libterm-sk-perl_0.18-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5470 Apr 26 02:40 libterm-sk-perl_0.18-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1147 Apr 26 02:40 libterm-sk-perl_0.18-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1296 Apr 26 02:40 libterm-sk-perl_0.18-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2: total 76 -rw-r--r-- 1 jenkins jenkins 24602 Apr 26 02:41 build.log -rw-r--r-- 1 jenkins jenkins 2636 Apr 26 02:41 libterm-sk-perl_0.18-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2019 Apr 26 02:41 libterm-sk-perl_0.18-3.dsc -rw-r--r-- 1 jenkins jenkins 14264 Apr 26 02:41 libterm-sk-perl_0.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 4588 Apr 26 02:41 libterm-sk-perl_0.18-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5470 Apr 26 02:41 libterm-sk-perl_0.18-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1147 Apr 26 02:41 libterm-sk-perl_0.18-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1296 Apr 26 02:41 libterm-sk-perl_0.18-3_source.changes Sat Apr 26 02:41:18 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Sat Apr 26 02:41:19 UTC 2025 I: libterm-sk-perl_0.18-3_arm64.changes: Format: 1.8 Date: Thu, 13 Oct 2022 23:26:00 +0100 Source: libterm-sk-perl Binary: libterm-sk-perl Architecture: all Version: 0.18-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libterm-sk-perl - Perl extension for displaying a progress indicator on a terminal Changes: libterm-sk-perl (0.18-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libterm-sk-perl: Add Multi-Arch: foreign. Checksums-Sha1: 4a55b57fbafc2020852f7c381eb2a88c4043b632 14264 libterm-sk-perl_0.18-3_all.deb 546a38df3b10b451ae95301eb4f948c9d88b429b 4588 libterm-sk-perl_0.18-3_arm64.buildinfo Checksums-Sha256: 7c0dbd847f26ab8d6c77894012969075afdc8d18002dbe1aac5405608d6003ff 14264 libterm-sk-perl_0.18-3_all.deb 0faf3dd38b2a0deebfa8c225cc6bd0d61bc1155cbfb4513f4ce91c26df9e33bd 4588 libterm-sk-perl_0.18-3_arm64.buildinfo Files: 1411f76341aa6c326d3734975c9fc5e2 14264 perl optional libterm-sk-perl_0.18-3_all.deb 2e34337c54fad51e77a69121fde62e45 4588 perl optional libterm-sk-perl_0.18-3_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libterm-sk-perl_0.18-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libterm-sk-perl_0.18-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libterm-sk-perl_0.18-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libterm-sk-perl_0.18-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libterm-sk-perl_0.18-3_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libterm-sk-perl_0.18-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-26 02:40:50.213237021 +0000 +++ b2/build.log 2025-04-26 02:41:18.284634380 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Fri Apr 25 14:40:29 -12 2025 -I: pbuilder-time-stamp: 1745635229 +I: Current time: Fri May 29 23:03:52 +14 2026 +I: pbuilder-time-stamp: 1780045432 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -22,52 +22,84 @@ dpkg-source: info: unpacking libterm-sk-perl_0.18-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/2285937/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 May 29 09:03 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='347a1dcb84f243638cd6c4682858214e' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='2285937' - PS1='# ' - PS2='> ' + INVOCATION_ID=407039a77d5141888321d1cb44a0d488 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=3852629 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_u5j0 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1 --logfile b1/build.log libterm-sk-perl_0.18-3.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/pbuilderrc_EgPX --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2 --logfile b2/build.log libterm-sk-perl_0.18-3.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-33-cloud-arm64 #1 SMP Debian 6.1.133-1 (2025-04-10) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/2285937/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -132,7 +164,7 @@ Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.2 [919 kB] -Fetched 10.9 MB in 0s (206 MB/s) +Fetched 10.9 MB in 0s (117 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19954 files and directories currently installed.) @@ -268,7 +300,11 @@ fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libterm-sk-perl-0.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libterm-sk-perl_0.18-3_source.changes +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libterm-sk-perl-0.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libterm-sk-perl_0.18-3_source.changes dpkg-buildpackage: info: source package libterm-sk-perl dpkg-buildpackage: info: source version 0.18-3 dpkg-buildpackage: info: source distribution unstable @@ -382,7 +418,7 @@ ok t/release-pod-syntax.t .. skipped: these tests are for release candidate testing All tests successful. -Files=2, Tests=78, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.13 cusr 0.03 csys = 0.20 CPU) +Files=2, Tests=78, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.09 cusr 0.02 csys = 0.13 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libterm-sk-perl-0.18' create-stamp debian/debhelper-build-stamp @@ -415,12 +451,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/3852629/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/2285937 and its subdirectories -I: Current time: Fri Apr 25 14:40:49 -12 2025 -I: pbuilder-time-stamp: 1745635249 +I: removing directory /srv/workspace/pbuilder/3852629 and its subdirectories +I: Current time: Fri May 29 23:04:16 +14 2026 +I: pbuilder-time-stamp: 1780045456 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libterm-sk-perl_0.18-3.diff: 66.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libterm-sk-perl_0.18-3.diff.gz b2/build.log: 72.6% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.1% -- replaced with stdout Sat Apr 26 02:41:20 UTC 2025 I: diffoscope 294 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libterm-sk-perl_trixie_arm64_1745635280 + touch /var/log/reproducible-builds/diffoscope_stamp_libterm-sk-perl_trixie_arm64_1745635280 + RESULT=0 + systemd-run '--description=diffoscope on libterm-sk-perl/0.18-3 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_11-95788 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt --run-session -c jenkins-reproducible-trixie-diffoscope-cdc7a05c-5748-4fd8-afa9-6828a7c87f36 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/dbd-tmp-rOOCTor ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/libterm-sk-perl_0.18-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/libterm-sk-perl_0.18-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/libterm-sk-perl_0.18-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1/libterm-sk-perl_0.18-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2/libterm-sk-perl_0.18-3_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_11-95788.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/libterm-sk-perl_0.18-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/libterm-sk-perl_0.18-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/libterm-sk-perl_0.18-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b1/libterm-sk-perl_0.18-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.Q0zfyPgt/b2/libterm-sk-perl_0.18-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 261ms CPU time consumed: 261ms _ _ _ _ _ _ | (_) |__ | |_ ___ _ __ _ __ ___ ___| | __ _ __ ___ _ __| | | | | '_ \| __/ _ \ '__| '_ ` _ \ _____/ __| |/ /____| '_ \ / _ \ '__| | | | | |_) | || __/ | | | | | | |_____\__ \ <_____| |_) | __/ | | | |_|_|_.__/ \__\___|_| |_| |_| |_| |___/_|\_\ | .__/ \___|_| |_| |_| Sat Apr 26 02:41:20 UTC 2025 I: diffoscope 294 found no differences in the changes files, and a .buildinfo file also exists. Sat Apr 26 02:41:20 UTC 2025 I: libterm-sk-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-26 02:41:21] INFO: Starting at 2025-04-26 02:41:21.497389 [2025-04-26 02:41:21] INFO: Generating the pages of 1 package(s) [2025-04-26 02:41:21] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libterm-sk-perl didn't produce a buildlog, even though it has been built. [2025-04-26 02:41:22] INFO: Finished at 2025-04-26 02:41:22.067687, took: 0:00:00.570305 Sat Apr 26 02:41:22 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libterm-sk-perl.html Sat Apr 26 02:41:22 UTC 2025 I: Submitting .buildinfo files to external archives: Sat Apr 26 02:41:22 UTC 2025 I: Submitting 8.0K b1/libterm-sk-perl_0.18-3_arm64.buildinfo.asc https://buildinfo.debian.net/546a38df3b10b451ae95301eb4f948c9d88b429b/libterm-sk-perl_0.18-3_all Sat Apr 26 02:41:41 UTC 2025 I: Submitting 8.0K b2/libterm-sk-perl_0.18-3_arm64.buildinfo.asc https://buildinfo.debian.net/c2d1d7c8c8bece62de4b9c4051d5529e69033401/libterm-sk-perl_0.18-3_all Sat Apr 26 02:42:07 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Apr 26 02:42:07 UTC 2025 I: Done submitting .buildinfo files. Sat Apr 26 02:42:07 UTC 2025 I: Removing signed libterm-sk-perl_0.18-3_arm64.buildinfo.asc files: removed './b1/libterm-sk-perl_0.18-3_arm64.buildinfo.asc' removed './b2/libterm-sk-perl_0.18-3_arm64.buildinfo.asc' 1745635327 arm64 trixie libterm-sk-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libterm-sk-perl_0.18-3.rbuild.log: 70.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libterm-sk-perl_0.18-3.rbuild.log.gz [2025-04-26 02:42:08] INFO: Starting at 2025-04-26 02:42:08.021030 [2025-04-26 02:42:08] INFO: Generating the pages of 1 package(s) [2025-04-26 02:42:08] INFO: Finished at 2025-04-26 02:42:08.755952, took: 0:00:00.734933 All cleanup done. Sat Apr 26 02:42:08 UTC 2025 - total duration: 0h 1m 15s. Sat Apr 26 02:42:08 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-ejHomIdd, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 3.389s CPU time consumed: 7.843s