Running as unit: rb-build-arm64_12-69696.service ==================================================================================== Fri Nov 22 06:14:02 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_12) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Fri Nov 22 06:14:02 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-dd5Rn4ai" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 06:14:02 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Nov 22 06:14:02 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-wVwRNp' Fri Nov 22 06:14:03 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Nov 22 06:14:03 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-HABbek' ok, let's check if libsys-mmap-perl is building anywhere yet… ok, libsys-mmap-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libsys-mmap-perl in unstable on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Nov 22 06:14:07 UTC 2024 I: starting to build libsys-mmap-perl/unstable/arm64 on jenkins on '2024-11-22 06:14' Fri Nov 22 06:14:07 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_12/69696/console.log 1732256047 arm64 unstable libsys-mmap-perl Fri Nov 22 06:14:07 UTC 2024 I: Downloading source for unstable/libsys-mmap-perl=0.20-2 --2024-11-22 06:14:07-- http://deb.debian.org/debian/pool/main/libs/libsys-mmap-perl/libsys-mmap-perl_0.20-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2334 (2.3K) [text/prs.lines.tag] Saving to: ‘libsys-mmap-perl_0.20-2.dsc’ 0K .. 100% 282M=0s 2024-11-22 06:14:07 (282 MB/s) - ‘libsys-mmap-perl_0.20-2.dsc’ saved [2334/2334] --2024-11-22 06:14:07-- http://deb.debian.org/debian/pool/main/libs/libsys-mmap-perl/libsys-mmap-perl_0.20-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2334 (2.3K) [text/prs.lines.tag] Saving to: ‘libsys-mmap-perl_0.20-2.dsc’ 0K .. 100% 282M=0s 2024-11-22 06:14:07 (282 MB/s) - ‘libsys-mmap-perl_0.20-2.dsc’ saved [2334/2334] Fri Nov 22 06:14:07 UTC 2024 I: libsys-mmap-perl_0.20-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libsys-mmap-perl Binary: libsys-mmap-perl Architecture: any Version: 0.20-2 Maintainer: Debian Perl Group Uploaders: Salvatore Bonaccorso Homepage: https://metacpan.org/release/Sys-Mmap Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl:native Package-List: libsys-mmap-perl deb perl optional arch=any Checksums-Sha1: f3d7a0bfcf9100e68102dfedb9165dc3e3569c7b 17962 libsys-mmap-perl_0.20.orig.tar.gz e1b59fc99e4f643fe44288cee83f7be6d4118536 2812 libsys-mmap-perl_0.20-2.debian.tar.xz Checksums-Sha256: 1820ce2c89f1ab7357644f8db0f49f142f54526250fb1e235db10aa80f15e2cf 17962 libsys-mmap-perl_0.20.orig.tar.gz a0c66397f44c62c1d60b2db06e97d04f1d55f849d0317e9fb72e53965693310c 2812 libsys-mmap-perl_0.20-2.debian.tar.xz Files: 57172ce9b33c04de460b4e7ad68d2e9c 17962 libsys-mmap-perl_0.20.orig.tar.gz 8f6a4dc717c050935fca732eabbb62b1 2812 libsys-mmap-perl_0.20-2.debian.tar.xz Dgit: dc954c2bbcac702079f9e521ca6217a7282cb22c debian archive/debian/0.20-2 https://git.dgit.debian.org/libsys-mmap-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmL6V4hfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZWyw//TUZwuHa2lHiuuFQ9U4niQo//BmBBKigLUK1lQ/4jmISdvg63tF57WB47 dwFxONngcvnQlDGq/ncbiEe9EM31Ea3o/iWQYN8QE4QT0J3oMXozZ3SvFloyGQIh JlZYLeJRsRqPpO1p/ZHm0JUlxckZzYVdtzFEQYUjbsNMAmfkAx3BjAbR4MII3yxW 1bvaXldCuGNKPx2wowagJe6im3N04rUW9Xvh56GnHn16dyUNaOf0zZwtxQRzYHsl YDzPK+tj+BwNtGF1Czkrd3mY83hHS9jLpcq1E45jja92//yFjdK6Q+RuS5MBs5B1 vCRfr/o6BszXBU/uPMexm6LuqDnf216QJ7XDVRucxEiz3PH68l1nSIgSf90BYz/W p8fa+RSm5OCBwKDvk+QalHgUG1qECF8TLMvW7/IzX3Otks0yN2ezd19lLqE18uX8 UfR7BWEQONfv+z6JWIfdGcg5tc0gy2tB/2O/uSvCkzMONpSWJyeOPZaeuzfUHsyT 5wCyId5dU5j1Qp6ljDpyrjSz16tdku1MwjOcFyc5dCQZVuEweuzlGxNbviVjdUOv DqwwaJaZ/b56BS8l+6k18YbRbpqWrGheAMBef9IvGGWRPhEaS6SZciEzyyoz6/yV kX+aX7cKZeWWs2FGomWhTRxcurE1qzyhaP3xojrCjvmjkcZMDkQ= =OTO8 -----END PGP SIGNATURE----- Fri Nov 22 06:14:07 UTC 2024 I: Checking whether the package is not for us Fri Nov 22 06:14:07 UTC 2024 I: Starting 1st build on remote node codethink04-arm64.debian.net. Fri Nov 22 06:14:07 UTC 2024 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Fri Nov 22 06:14:07 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Nov 22 06:14:07 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-4Srvnd' ==================================================================================== Fri Nov 22 06:14:09 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libsys-mmap-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn 0.20-2" as arguments. Fri Nov 22 06:14:09 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-7NpGLrio" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 06:14:09 UTC 2024 I: Downloading source for unstable/libsys-mmap-perl=0.20-2 Reading package lists... NOTICE: 'libsys-mmap-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (dsc) [2334 B] Get:2 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (tar) [18.0 kB] Get:3 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (diff) [2812 B] Fetched 23.1 kB in 0s (275 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libsys-mmap-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (dsc) [2334 B] Get:2 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (tar) [18.0 kB] Get:3 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (diff) [2812 B] Fetched 23.1 kB in 0s (275 kB/s) Download complete and in download only mode ============================================================================= Building libsys-mmap-perl in unstable on arm64 on codethink04-arm64 now. Date: Fri Nov 22 06:14:09 GMT 2024 Date UTC: Fri Nov 22 06:14:09 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Nov 21 18:14:09 -12 2024 I: pbuilder-time-stamp: 1732256049 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libsys-mmap-perl_0.20-2.dsc] I: copying [./libsys-mmap-perl_0.20.orig.tar.gz] I: copying [./libsys-mmap-perl_0.20-2.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Aug 15 14:26:16 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libsys-mmap-perl_0.20-2.dsc: no acceptable signature found dpkg-source: info: extracting libsys-mmap-perl in libsys-mmap-perl-0.20 dpkg-source: info: unpacking libsys-mmap-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libsys-mmap-perl_0.20-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/993/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='f2e4ff8b1ae54bc283daf05d697cba20' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='993' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_8wJm --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1 --logfile b1/build.log libsys-mmap-perl_0.20-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/993/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.0-7 [1022 kB] Fetched 20.4 MB in 0s (139 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.40.0-7_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.0-7) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libsys-mmap-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsys-mmap-perl_0.20-2_source.changes dpkg-buildpackage: info: source package libsys-mmap-perl dpkg-buildpackage: info: source version 0.20-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sys::Mmap Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' Running Mkbootstrap for Mmap () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Mmap.xs > Mmap.xsc chmod 644 "Mmap.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 cp Mmap.pm blib/lib/Sys/Mmap.pm mv Mmap.xsc Mmap.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Mmap.c rm -f blib/arch/auto/Sys/Mmap/Mmap.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Mmap.o -o blib/arch/auto/Sys/Mmap/Mmap.so \ \ chmod 755 blib/arch/auto/Sys/Mmap/Mmap.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/mmap.t ........... 1..8 ok 1 - Negative seek fails. ok 2 - croaks when negative offset is passed in ok 3 - RO access to the file produces valid data ok 4 - Read ahead with MAP_POPULATE ok 5 - Foo can be altered in RW mode ok 6 - Altered foo reflects on disk ok 7 - A reference of type 'GLOB' isa 'GLOB' ok 8 - Read $foo, when it comes from a FileHandle ok t/munmap_errors.t .. 1..14 ok 1 - munmap detects undef perl variables and fails ok 2 - munmap detects undef perl variables and fails ok 3 - munmap detects undef perl variables and fails ok 4 - Unmapped strings die ok 5 - Unmapped strings die ok 6 - Unmapped strings die ok 7 - Unmapped strings die ok 8 - munmap detects ints and floats and fails ok 9 - munmap detects ints and floats and fails ok 10 - munmap detects ints and floats and fails ok 11 - munmap detects ints and floats and fails ok 12 - munmap detects ints and floats and fails ok 13 - munmap detects ints and floats and fails ok 14 - munmap detects ints and floats and fails ok All tests successful. Files=2, Tests=22, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.15 cusr 0.03 csys = 0.22 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsys-mmap-perl/ make -j12 install DESTDIR=/build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Sys/Mmap/Mmap.so Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Sys/Mmap.pm Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/share/man/man3/Sys::Mmap.3pm make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsys-mmap-perl' in '../libsys-mmap-perl_0.20-2_arm64.deb'. dpkg-deb: building package 'libsys-mmap-perl-dbgsym' in '../libsys-mmap-perl-dbgsym_0.20-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libsys-mmap-perl_0.20-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libsys-mmap-perl_0.20-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/993 and its subdirectories I: Current time: Thu Nov 21 18:14:34 -12 2024 I: pbuilder-time-stamp: 1732256074 Fri Nov 22 06:14:34 UTC 2024 I: Signing ./b1/libsys-mmap-perl_0.20-2_arm64.buildinfo as libsys-mmap-perl_0.20-2_arm64.buildinfo.asc Fri Nov 22 06:14:34 UTC 2024 I: Signed ./b1/libsys-mmap-perl_0.20-2_arm64.buildinfo as ./b1/libsys-mmap-perl_0.20-2_arm64.buildinfo.asc Fri Nov 22 06:14:34 UTC 2024 - build #1 for libsys-mmap-perl/unstable/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Fri Nov 22 06:14:34 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-7NpGLrio, removing. /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 06:14 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 06:14 b2 -rw-r--r-- 1 jenkins jenkins 2334 Aug 15 2022 libsys-mmap-perl_0.20-2.dsc -rw------- 1 jenkins jenkins 3505 Nov 22 06:14 rbuildlog.gf6CPQA /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1: total 108 -rw-r--r-- 1 jenkins jenkins 22868 Nov 22 06:14 build.log -rw-r--r-- 1 jenkins jenkins 31388 Nov 22 06:14 libsys-mmap-perl-dbgsym_0.20-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2812 Nov 22 06:14 libsys-mmap-perl_0.20-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2334 Nov 22 06:14 libsys-mmap-perl_0.20-2.dsc -rw-r--r-- 1 jenkins jenkins 5041 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5923 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1670 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 18020 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1527 Nov 22 06:14 libsys-mmap-perl_0.20-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2: total 0 Fri Nov 22 06:14:37 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Nov 21 18:14:09 -12 2024 I: pbuilder-time-stamp: 1732256049 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libsys-mmap-perl_0.20-2.dsc] I: copying [./libsys-mmap-perl_0.20.orig.tar.gz] I: copying [./libsys-mmap-perl_0.20-2.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Aug 15 14:26:16 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libsys-mmap-perl_0.20-2.dsc: no acceptable signature found dpkg-source: info: extracting libsys-mmap-perl in libsys-mmap-perl-0.20 dpkg-source: info: unpacking libsys-mmap-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libsys-mmap-perl_0.20-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/993/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='f2e4ff8b1ae54bc283daf05d697cba20' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='993' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_8wJm --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1 --logfile b1/build.log libsys-mmap-perl_0.20-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/993/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.0-7 [1022 kB] Fetched 20.4 MB in 0s (139 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.40.0-7_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.0-7) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libsys-mmap-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsys-mmap-perl_0.20-2_source.changes dpkg-buildpackage: info: source package libsys-mmap-perl dpkg-buildpackage: info: source version 0.20-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sys::Mmap Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' Running Mkbootstrap for Mmap () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Mmap.xs > Mmap.xsc chmod 644 "Mmap.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 cp Mmap.pm blib/lib/Sys/Mmap.pm mv Mmap.xsc Mmap.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Mmap.c rm -f blib/arch/auto/Sys/Mmap/Mmap.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Mmap.o -o blib/arch/auto/Sys/Mmap/Mmap.so \ \ chmod 755 blib/arch/auto/Sys/Mmap/Mmap.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/mmap.t ........... 1..8 ok 1 - Negative seek fails. ok 2 - croaks when negative offset is passed in ok 3 - RO access to the file produces valid data ok 4 - Read ahead with MAP_POPULATE ok 5 - Foo can be altered in RW mode ok 6 - Altered foo reflects on disk ok 7 - A reference of type 'GLOB' isa 'GLOB' ok 8 - Read $foo, when it comes from a FileHandle ok t/munmap_errors.t .. 1..14 ok 1 - munmap detects undef perl variables and fails ok 2 - munmap detects undef perl variables and fails ok 3 - munmap detects undef perl variables and fails ok 4 - Unmapped strings die ok 5 - Unmapped strings die ok 6 - Unmapped strings die ok 7 - Unmapped strings die ok 8 - munmap detects ints and floats and fails ok 9 - munmap detects ints and floats and fails ok 10 - munmap detects ints and floats and fails ok 11 - munmap detects ints and floats and fails ok 12 - munmap detects ints and floats and fails ok 13 - munmap detects ints and floats and fails ok 14 - munmap detects ints and floats and fails ok All tests successful. Files=2, Tests=22, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.15 cusr 0.03 csys = 0.22 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsys-mmap-perl/ make -j12 install DESTDIR=/build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Sys/Mmap/Mmap.so Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Sys/Mmap.pm Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/share/man/man3/Sys::Mmap.3pm make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsys-mmap-perl' in '../libsys-mmap-perl_0.20-2_arm64.deb'. dpkg-deb: building package 'libsys-mmap-perl-dbgsym' in '../libsys-mmap-perl-dbgsym_0.20-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libsys-mmap-perl_0.20-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libsys-mmap-perl_0.20-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/993 and its subdirectories I: Current time: Thu Nov 21 18:14:34 -12 2024 I: pbuilder-time-stamp: 1732256074 Fri Nov 22 06:14:38 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Nov 22 06:14:38 UTC 2024 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Nov 22 06:14:38 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Nov 22 06:14:38 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-bNUpME' ==================================================================================== Thu Dec 25 12:37:39 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libsys-mmap-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn 0.20-2" as arguments. Thu Dec 25 12:37:39 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-8txWnZHx" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Dec 25 12:37:39 UTC 2025 I: Downloading source for unstable/libsys-mmap-perl=0.20-2 Reading package lists... NOTICE: 'libsys-mmap-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (dsc) [2334 B] Get:2 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (tar) [18.0 kB] Get:3 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (diff) [2812 B] Fetched 23.1 kB in 0s (1420 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libsys-mmap-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsys-mmap-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 23.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (dsc) [2334 B] Get:2 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (tar) [18.0 kB] Get:3 http://deb.debian.org/debian unstable/main libsys-mmap-perl 0.20-2 (diff) [2812 B] Fetched 23.1 kB in 0s (1420 kB/s) Download complete and in download only mode ============================================================================= Re-Building libsys-mmap-perl in unstable on arm64 on codethink03-arm64 now. Date: Thu Dec 25 12:37:40 GMT 2025 Date UTC: Thu Dec 25 12:37:40 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_RoGr + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libsys-mmap-perl = debian-installer -o libsys-mmap-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libsys-mmap-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_RoGr --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2 --logfile b2/build.log libsys-mmap-perl_0.20-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Dec 26 02:37:40 +14 2025 I: pbuilder-time-stamp: 1766666260 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libsys-mmap-perl_0.20-2.dsc] I: copying [./libsys-mmap-perl_0.20.orig.tar.gz] I: copying [./libsys-mmap-perl_0.20-2.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Aug 15 14:26:16 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libsys-mmap-perl_0.20-2.dsc: no acceptable signature found dpkg-source: info: extracting libsys-mmap-perl in libsys-mmap-perl-0.20 dpkg-source: info: unpacking libsys-mmap-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libsys-mmap-perl_0.20-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 25 12:37 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=68c99a64544c446fbf255f57184d2ef7 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1200405 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_RoGr --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2 --logfile b2/build.log libsys-mmap-perl_0.20-2.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.0-7 [1022 kB] Fetched 20.4 MB in 0s (113 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.40.0-7_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.0-7) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libsys-mmap-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libsys-mmap-perl_0.20-2_source.changes dpkg-buildpackage: info: source package libsys-mmap-perl dpkg-buildpackage: info: source version 0.20-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sys::Mmap Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' Running Mkbootstrap for Mmap () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Mmap.xs > Mmap.xsc cp Mmap.pm blib/lib/Sys/Mmap.pm chmod 644 "Mmap.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 mv Mmap.xsc Mmap.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Mmap.c rm -f blib/arch/auto/Sys/Mmap/Mmap.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Mmap.o -o blib/arch/auto/Sys/Mmap/Mmap.so \ \ chmod 755 blib/arch/auto/Sys/Mmap/Mmap.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/mmap.t ........... 1..8 ok 1 - Negative seek fails. ok 2 - croaks when negative offset is passed in ok 3 - RO access to the file produces valid data ok 4 - Read ahead with MAP_POPULATE ok 5 - Foo can be altered in RW mode ok 6 - Altered foo reflects on disk ok 7 - A reference of type 'GLOB' isa 'GLOB' ok 8 - Read $foo, when it comes from a FileHandle ok t/munmap_errors.t .. 1..14 ok 1 - munmap detects undef perl variables and fails ok 2 - munmap detects undef perl variables and fails ok 3 - munmap detects undef perl variables and fails ok 4 - Unmapped strings die ok 5 - Unmapped strings die ok 6 - Unmapped strings die ok 7 - Unmapped strings die ok 8 - munmap detects ints and floats and fails ok 9 - munmap detects ints and floats and fails ok 10 - munmap detects ints and floats and fails ok 11 - munmap detects ints and floats and fails ok 12 - munmap detects ints and floats and fails ok 13 - munmap detects ints and floats and fails ok 14 - munmap detects ints and floats and fails ok All tests successful. Files=2, Tests=22, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.18 cusr 0.03 csys = 0.25 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsys-mmap-perl/ make -j12 install DESTDIR=/build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Sys/Mmap/Mmap.so Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Sys/Mmap.pm Installing /build/reproducible-path/libsys-mmap-perl-0.20/debian/libsys-mmap-perl/usr/share/man/man3/Sys::Mmap.3pm make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsys-mmap-perl' in '../libsys-mmap-perl_0.20-2_arm64.deb'. dpkg-deb: building package 'libsys-mmap-perl-dbgsym' in '../libsys-mmap-perl-dbgsym_0.20-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libsys-mmap-perl_0.20-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libsys-mmap-perl_0.20-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1200405 and its subdirectories I: Current time: Fri Dec 26 02:38:08 +14 2025 I: pbuilder-time-stamp: 1766666288 + false + set +x Thu Dec 25 12:38:08 UTC 2025 I: Signing ./b2/libsys-mmap-perl_0.20-2_arm64.buildinfo as libsys-mmap-perl_0.20-2_arm64.buildinfo.asc Thu Dec 25 12:38:08 UTC 2025 I: Signed ./b2/libsys-mmap-perl_0.20-2_arm64.buildinfo as ./b2/libsys-mmap-perl_0.20-2_arm64.buildinfo.asc Thu Dec 25 12:38:08 UTC 2025 - build #2 for libsys-mmap-perl/unstable/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu Dec 25 12:38:08 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-8txWnZHx, removing. /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 06:14 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 06:15 b2 -rw-r--r-- 1 jenkins jenkins 2334 Aug 15 2022 libsys-mmap-perl_0.20-2.dsc -rw------- 1 jenkins jenkins 26674 Nov 22 06:14 rbuildlog.gf6CPQA /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1: total 108 -rw-r--r-- 1 jenkins jenkins 22868 Nov 22 06:14 build.log -rw-r--r-- 1 jenkins jenkins 31388 Nov 22 06:14 libsys-mmap-perl-dbgsym_0.20-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2812 Nov 22 06:14 libsys-mmap-perl_0.20-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2334 Nov 22 06:14 libsys-mmap-perl_0.20-2.dsc -rw-r--r-- 1 jenkins jenkins 5041 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5923 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1670 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 18020 Nov 22 06:14 libsys-mmap-perl_0.20-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1527 Nov 22 06:14 libsys-mmap-perl_0.20-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2: total 112 -rw-r--r-- 1 jenkins jenkins 24829 Nov 22 06:15 build.log -rw-r--r-- 1 jenkins jenkins 31388 Nov 22 06:15 libsys-mmap-perl-dbgsym_0.20-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2812 Nov 22 06:15 libsys-mmap-perl_0.20-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2334 Nov 22 06:15 libsys-mmap-perl_0.20-2.dsc -rw-r--r-- 1 jenkins jenkins 5041 Nov 22 06:15 libsys-mmap-perl_0.20-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5923 Nov 22 06:15 libsys-mmap-perl_0.20-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1670 Nov 22 06:15 libsys-mmap-perl_0.20-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 18020 Nov 22 06:15 libsys-mmap-perl_0.20-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1527 Nov 22 06:15 libsys-mmap-perl_0.20-2_source.changes Fri Nov 22 06:15:09 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Nov 22 06:15:10 UTC 2024 I: libsys-mmap-perl_0.20-2_arm64.changes: Format: 1.8 Date: Mon, 15 Aug 2022 16:24:38 +0200 Source: libsys-mmap-perl Binary: libsys-mmap-perl libsys-mmap-perl-dbgsym Architecture: arm64 Version: 0.20-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libsys-mmap-perl - module for using POSIX mmap Changes: libsys-mmap-perl (0.20-2) unstable; urgency=medium . * Team upload. . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. . [ Debian Janitor ] * Apply multi-arch hints. + libsys-mmap-perl: Add Multi-Arch: same. . [ gregor herrmann ] * Declare compliance with Debian Policy 4.6.1. * Bump debhelper-compat to 13. Checksums-Sha1: 52e604ba9571a43ec6e97d9ce48efaae7e59109b 31388 libsys-mmap-perl-dbgsym_0.20-2_arm64.deb 8f8b2e3ec638932e272a578c327787988afe6655 5041 libsys-mmap-perl_0.20-2_arm64.buildinfo c15804b40c65a4d1e48d3803abbaeca06373cab3 18020 libsys-mmap-perl_0.20-2_arm64.deb Checksums-Sha256: 40c25d6d9d903d588fa73341ca7682a80f2efeef6a86ff8f1046b4cad92c93c6 31388 libsys-mmap-perl-dbgsym_0.20-2_arm64.deb 09ac2faf26813606115054a46b5134d7922710d1d018fa4f0a6132ba4b15c1b3 5041 libsys-mmap-perl_0.20-2_arm64.buildinfo 0402cc40c7f77ebf9ca6d9e980bf6cffdc876537f8711ae0b5d0b69af88a9acc 18020 libsys-mmap-perl_0.20-2_arm64.deb Files: 96cd46afea1dda7682187737049db07e 31388 debug optional libsys-mmap-perl-dbgsym_0.20-2_arm64.deb 68ca5bdba4f269934fdfc0b0b2fc8ca5 5041 perl optional libsys-mmap-perl_0.20-2_arm64.buildinfo c424acb73eebd0b7daac08a0ae8ad300 18020 perl optional libsys-mmap-perl_0.20-2_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libsys-mmap-perl_0.20-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libsys-mmap-perl_0.20-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libsys-mmap-perl_0.20-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libsys-mmap-perl_0.20-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/arm64/libsys-mmap-perl_0.20-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libsys-mmap-perl_0.20-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-22 06:14:36.955167092 +0000 +++ b2/build.log 2024-11-22 06:15:09.761688481 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Nov 21 18:14:09 -12 2024 -I: pbuilder-time-stamp: 1732256049 +I: Current time: Fri Dec 26 02:37:40 +14 2025 +I: pbuilder-time-stamp: 1766666260 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -25,52 +25,84 @@ dpkg-source: info: unpacking libsys-mmap-perl_0.20-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/993/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 25 12:37 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='f2e4ff8b1ae54bc283daf05d697cba20' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='993' - PS1='# ' - PS2='> ' + INVOCATION_ID=68c99a64544c446fbf255f57184d2ef7 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1200405 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_8wJm --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1 --logfile b1/build.log libsys-mmap-perl_0.20-2.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/pbuilderrc_RoGr --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2 --logfile b2/build.log libsys-mmap-perl_0.20-2.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/993/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -139,7 +171,7 @@ Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.0-7 [1022 kB] -Fetched 20.4 MB in 0s (139 MB/s) +Fetched 20.4 MB in 0s (113 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) @@ -274,7 +306,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libsys-mmap-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsys-mmap-perl_0.20-2_source.changes +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libsys-mmap-perl-0.20/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libsys-mmap-perl_0.20-2_source.changes dpkg-buildpackage: info: source package libsys-mmap-perl dpkg-buildpackage: info: source version 0.20-2 dpkg-buildpackage: info: source distribution unstable @@ -300,9 +336,9 @@ make[1]: Entering directory '/build/reproducible-path/libsys-mmap-perl-0.20' Running Mkbootstrap for Mmap () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Mmap.xs > Mmap.xsc +cp Mmap.pm blib/lib/Sys/Mmap.pm chmod 644 "Mmap.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mmap.bs blib/arch/auto/Sys/Mmap/Mmap.bs 644 -cp Mmap.pm blib/lib/Sys/Mmap.pm mv Mmap.xsc Mmap.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsys-mmap-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Mmap.c rm -f blib/arch/auto/Sys/Mmap/Mmap.so @@ -346,7 +382,7 @@ ok 14 - munmap detects ints and floats and fails ok All tests successful. -Files=2, Tests=22, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.15 cusr 0.03 csys = 0.22 CPU) +Files=2, Tests=22, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.18 cusr 0.03 csys = 0.25 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsys-mmap-perl-0.20' create-stamp debian/debhelper-build-stamp @@ -391,12 +427,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1200405/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/993 and its subdirectories -I: Current time: Thu Nov 21 18:14:34 -12 2024 -I: pbuilder-time-stamp: 1732256074 +I: removing directory /srv/workspace/pbuilder/1200405 and its subdirectories +I: Current time: Fri Dec 26 02:38:08 +14 2025 +I: pbuilder-time-stamp: 1766666288 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libsys-mmap-perl_0.20-2.diff: 65.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libsys-mmap-perl_0.20-2.diff.gz b2/build.log: 73.3% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.9% -- replaced with stdout Fri Nov 22 06:15:11 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libsys-mmap-perl_unstable_arm64_1732256111 + touch /var/log/reproducible-builds/diffoscope_stamp_libsys-mmap-perl_unstable_arm64_1732256111 + RESULT=0 + systemd-run '--description=diffoscope on libsys-mmap-perl/0.20-2 in unstable/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_12-69696 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn --run-session -c jenkins-reproducible-unstable-diffoscope-c8f3e9ad-9bde-4c2a-8493-9c16cbf741ed -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/dbd-tmp-CzeDxYb ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/libsys-mmap-perl_0.20-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/libsys-mmap-perl_0.20-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/libsys-mmap-perl_0.20-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1/libsys-mmap-perl_0.20-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2/libsys-mmap-perl_0.20-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_12-69696.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/libsys-mmap-perl_0.20-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/libsys-mmap-perl_0.20-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/libsys-mmap-perl_0.20-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b1/libsys-mmap-perl_0.20-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.FRzLA5wn/b2/libsys-mmap-perl_0.20-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.394s) 0.394s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 756ms CPU time consumed: 748ms _ _ _ | (_) |__ ___ _ _ ___ _ __ ___ _ __ ___ __ _ _ __ _ __ | | | '_ \/ __| | | / __|_____| '_ ` _ \| '_ ` _ \ / _` | '_ \ _____| '_ \ | | | |_) \__ \ |_| \__ \_____| | | | | | | | | | | (_| | |_) |_____| |_) | |_|_|_.__/|___/\__, |___/ |_| |_| |_|_| |_| |_|\__,_| .__/ | .__/ |___/ |_| |_| _ ___ _ __| | / _ \ '__| | | __/ | | | \___|_| |_| Fri Nov 22 06:15:18 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Fri Nov 22 06:15:18 UTC 2024 I: libsys-mmap-perl from unstable built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-22 06:15:19] INFO: Starting at 2024-11-22 06:15:19.323599 [2024-11-22 06:15:19] INFO: Generating the pages of 1 package(s) [2024-11-22 06:15:19] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/arm64/libsys-mmap-perl didn't produce a buildlog, even though it has been built. [2024-11-22 06:15:20] INFO: Finished at 2024-11-22 06:15:20.211893, took: 0:00:00.888302 Fri Nov 22 06:15:20 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/arm64/libsys-mmap-perl.html Fri Nov 22 06:15:20 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Nov 22 06:15:20 UTC 2024 I: Submitting 8.0K b1/libsys-mmap-perl_0.20-2_arm64.buildinfo.asc https://buildinfo.debian.net/8f8b2e3ec638932e272a578c327787988afe6655/libsys-mmap-perl_0.20-2_arm64 Fri Nov 22 06:15:21 UTC 2024 I: Submitting 8.0K b2/libsys-mmap-perl_0.20-2_arm64.buildinfo.asc https://buildinfo.debian.net/e8fcce91cdc08c4bbbdd0a0d881f3081dde40f4a/libsys-mmap-perl_0.20-2_arm64 Fri Nov 22 06:15:22 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Nov 22 06:15:22 UTC 2024 I: Done submitting .buildinfo files. Fri Nov 22 06:15:22 UTC 2024 I: Removing signed libsys-mmap-perl_0.20-2_arm64.buildinfo.asc files: removed './b1/libsys-mmap-perl_0.20-2_arm64.buildinfo.asc' removed './b2/libsys-mmap-perl_0.20-2_arm64.buildinfo.asc' 1732256122 arm64 unstable libsys-mmap-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libsys-mmap-perl_0.20-2.rbuild.log: 70.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libsys-mmap-perl_0.20-2.rbuild.log.gz [2024-11-22 06:15:23] INFO: Starting at 2024-11-22 06:15:23.152728 [2024-11-22 06:15:23] INFO: Generating the pages of 1 package(s) [2024-11-22 06:15:23] INFO: Finished at 2024-11-22 06:15:23.739950, took: 0:00:00.587231 All cleanup done. Fri Nov 22 06:15:23 UTC 2024 - total duration: 0h 1m 16s. Fri Nov 22 06:15:23 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-dd5Rn4ai, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 21.278s CPU time consumed: 8.143s