Running as unit: rb-build-arm64_16-16898.service ==================================================================================== Fri Jun 28 12:51:11 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_16) on jenkins, called using "codethink02-arm64 codethink01-arm64" as arguments. Fri Jun 28 12:51:11 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-ZsXAKZZa" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Jun 28 12:51:11 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Fri Jun 28 12:51:11 UTC 2024 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-pdrVwa' Fri Jun 28 12:51:12 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Fri Jun 28 12:51:12 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-v8m5Dv' ok, let's check if libpdf-report-perl is building anywhere yet… ok, libpdf-report-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libpdf-report-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink02-arm64.debian.net. 2nd build will be done on codethink01-arm64.debian.net. ============================================================================= Fri Jun 28 12:51:32 UTC 2024 I: starting to build libpdf-report-perl/trixie/arm64 on jenkins on '2024-06-28 12:51' Fri Jun 28 12:51:32 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_16/16898/console.log 1719579092 arm64 trixie libpdf-report-perl Fri Jun 28 12:51:32 UTC 2024 I: Downloading source for trixie/libpdf-report-perl=1.36-2 --2024-06-28 12:51:32-- http://deb.debian.org/debian/pool/main/libp/libpdf-report-perl/libpdf-report-perl_1.36-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2234 (2.2K) [text/prs.lines.tag] Saving to: ‘libpdf-report-perl_1.36-2.dsc’ 0K .. 100% 287M=0s 2024-06-28 12:51:32 (287 MB/s) - ‘libpdf-report-perl_1.36-2.dsc’ saved [2234/2234] --2024-06-28 12:51:32-- http://deb.debian.org/debian/pool/main/libp/libpdf-report-perl/libpdf-report-perl_1.36-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2234 (2.2K) [text/prs.lines.tag] Saving to: ‘libpdf-report-perl_1.36-2.dsc’ 0K .. 100% 287M=0s 2024-06-28 12:51:32 (287 MB/s) - ‘libpdf-report-perl_1.36-2.dsc’ saved [2234/2234] Fri Jun 28 12:51:32 UTC 2024 I: libpdf-report-perl_1.36-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libpdf-report-perl Binary: libpdf-report-perl Architecture: all Version: 1.36-2 Maintainer: Debian Perl Group Uploaders: Allard Hoeve , Niko Tyni , gregor herrmann , Florian Schlichting Homepage: https://metacpan.org/release/PDF-Report Standards-Version: 3.9.4 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libpdf-api2-perl, libtest-pod-perl, perl Package-List: libpdf-report-perl deb perl optional arch=all Checksums-Sha1: aa6be27ff2af3c53c45cafe65d1c61812c465f7e 21019 libpdf-report-perl_1.36.orig.tar.gz be6456ea3bb679969f6ef88b5f101e2315f66068 5044 libpdf-report-perl_1.36-2.debian.tar.xz Checksums-Sha256: aa9a6a5ee5992317b346c241b6f9ad84f30d77e6d1fbce68973727459ee4984d 21019 libpdf-report-perl_1.36.orig.tar.gz a0082c37064f4f26d7d0537a485d14bed83460311540540465638c7db73df626 5044 libpdf-report-perl_1.36-2.debian.tar.xz Files: f6a5f4e9c1d831b76360e9d2caf75feb 21019 libpdf-report-perl_1.36.orig.tar.gz d69fda7e2f6adbca125afd4cdc387bd5 5044 libpdf-report-perl_1.36-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKrtBkACgkQV5wWDUye I+hPVw/9EV6WVil3xwLLsFHAHVtKmg/3HBztjWqbhl5sP/9K1kvruQRfbZD6ojuW OSFyDrIkOXKoZHcjg/5l75TzwcKkSuPP5dk8U3R3ZwVSSxyHPWvoWFdGmOu75ydm iUrSF42MEy/FOuPfZDdaDpO7U3gvM5/DEwCnhSmJqE7pyrAv/0/eAe6GQ04h1aGL 7bXLpbT+7i1xgcCoNCGj5pEp7bBbdfi6xw+gnYpcmzuEwIeHDrhUvd1+mv8Kzb0k QKdqFpuL70ei0IS58J5Uk4f06eOUrmfCCNhGJQ1CFTG7aKeMpov1V4E+J77OmVS6 txY7CM7nLR07DWxS74DQVXp+d+ytXWqpCKbNX45RdLo+b9NYN8TcWYlk7PKghHIf V4HtIEQTDk5dLABL3AE71hNE3pDNkaNnbZHQavP7mxbB39Y5usLZhuIuES0rIzs1 t9j/3lRizSMJFq7H/bF99CPFhEGAAfweaE+PUf9U0AXVh3suPZFX4l7UZsodbcq0 CTRIUxuDRiHA5aQWb0pmGXwkQcbef6sYWkK1TfLd69x9hG+BmEEfSWGFmJsV510e y1nF8m3y+yeOVqWNKUJl4emW1L180DLR7DSJTEKg5+6TocLeoDkw/n+Xo4mSgqXw yvgp4zxiEX0hE+7PYK8XL2lwm3dSUb7wRpd1aWazcD1XJUCAtpA= =2a4C -----END PGP SIGNATURE----- Fri Jun 28 12:51:32 UTC 2024 I: Checking whether the package is not for us Fri Jun 28 12:51:32 UTC 2024 I: Starting 1st build on remote node codethink02-arm64.debian.net. Fri Jun 28 12:51:32 UTC 2024 I: Preparing to do remote build '1' on codethink02-arm64.debian.net. Fri Jun 28 12:51:32 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Fri Jun 28 12:51:32 UTC 2024 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-gh357N' ==================================================================================== Fri Jun 28 12:51:34 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink02-arm64, called using "1 libpdf-report-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur 1.36-2" as arguments. Fri Jun 28 12:51:34 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-8QlVNlWQ" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Jun 28 12:51:34 UTC 2024 I: Downloading source for trixie/libpdf-report-perl=1.36-2 Reading package lists... NOTICE: 'libpdf-report-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (dsc) [2234 B] Get:2 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (tar) [21.0 kB] Get:3 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (diff) [5044 B] Fetched 28.3 kB in 0s (368 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libpdf-report-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (dsc) [2234 B] Get:2 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (tar) [21.0 kB] Get:3 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (diff) [5044 B] Fetched 28.3 kB in 0s (368 kB/s) Download complete and in download only mode ============================================================================= Building libpdf-report-perl in trixie on arm64 on codethink02-arm64 now. Date: Fri Jun 28 13:51:34 BST 2024 Date UTC: Fri Jun 28 12:51:34 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Jun 28 00:51:34 -12 2024 I: pbuilder-time-stamp: 1719579094 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libpdf-report-perl_1.36-2.dsc] I: copying [./libpdf-report-perl_1.36.orig.tar.gz] I: copying [./libpdf-report-perl_1.36-2.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jun 16 22:52:09 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libpdf-report-perl_1.36-2.dsc: no acceptable signature found dpkg-source: info: extracting libpdf-report-perl in libpdf-report-perl-1.36 dpkg-source: info: unpacking libpdf-report-perl_1.36.orig.tar.gz dpkg-source: info: unpacking libpdf-report-perl_1.36-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying example-paths I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2061534/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b157269c7f4646358f20fb5837bd0bfc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2061534' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_rgoJ --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1 --logfile b1/build.log libpdf-report-perl_1.36-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2061534/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libpdf-api2-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libpdf-api2-perl; however: Package libpdf-api2-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libfont-ttf-perl{a} libicu72{a} libio-string-perl{a} libmagic-mgc{a} libmagic1t64{a} libpdf-api2-perl{a} libpipeline1{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libimage-png-libpng-perl libltdl-dev libmail-sendmail-perl libpdf-api2-xs-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 20.5 MB of archives. After unpacking 96.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.23 [24.7 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-15 [159 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.1-8.1 [95.1 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-2 [1394 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-15 [683 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.16 [88.6 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-15 [1249 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.16 [891 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libio-string-perl all 1.08-4 [12.1 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libfont-ttf-perl all 1.06-2 [318 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpdf-api2-perl all 2.047-1 [1334 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 20.5 MB in 0s (91.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.23_all.deb ... Unpacking sensible-utils (0.0.23) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-15_arm64.deb ... Unpacking gettext-base (0.21-15) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-8.1_arm64.deb ... Unpacking bsdextrautils (2.40.1-8.1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_arm64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-15_all.deb ... Unpacking autopoint (0.21-15) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-15_arm64.deb ... Unpacking gettext (0.21-15) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../29-libio-string-perl_1.08-4_all.deb ... Unpacking libio-string-perl (1.08-4) ... Selecting previously unselected package libfont-ttf-perl. Preparing to unpack .../30-libfont-ttf-perl_1.06-2_all.deb ... Unpacking libfont-ttf-perl (1.06-2) ... Selecting previously unselected package libpdf-api2-perl. Preparing to unpack .../31-libpdf-api2-perl_2.047-1_all.deb ... Unpacking libpdf-api2-perl (2.047-1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../32-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8.1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.21-15) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up libio-string-perl (1.08-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-15) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.23) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libfont-ttf-perl (1.06-2) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-15) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up libpdf-api2-perl (2.047-1) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libpdf-report-perl-1.36/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libpdf-report-perl_1.36-2_source.changes dpkg-buildpackage: info: source package libpdf-report-perl dpkg-buildpackage: info: source version 1.36-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpdf-report-perl-1.36=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpdf-report-perl-1.36=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PDF::Report Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' cp lib/PDF/Report.pm blib/lib/PDF/Report.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing PDF::Report 1.36, Perl 5.038002, /usr/bin/perl t/00-load.t .. 1..1 ok 1 - use PDF::Report; ok t/pod.t ...... 1..1 ok 1 - POD test for blib/lib/PDF/Report.pm ok All tests successful. Files=2, Tests=2, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.31 cusr 0.05 csys = 0.40 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libpdf-report-perl/ make -j12 install DESTDIR=/build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' Manifying 1 pod document Installing /build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl/usr/share/perl5/PDF/Report.pm Installing /build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl/usr/share/man/man3/PDF::Report.3pm make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_compress -Ximage. make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' debian/rules override_dh_fixperms make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_fixperms chmod 644 debian/libpdf-report-perl/usr/share/doc/libpdf-report-perl/examples/image.* chmod 755 debian/libpdf-report-perl/usr/share/doc/libpdf-report-perl/examples/*.pl make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libpdf-report-perl' in '../libpdf-report-perl_1.36-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libpdf-report-perl_1.36-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libpdf-report-perl_1.36-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2061534 and its subdirectories I: Current time: Fri Jun 28 00:51:58 -12 2024 I: pbuilder-time-stamp: 1719579118 Fri Jun 28 12:51:58 UTC 2024 I: Signing ./b1/libpdf-report-perl_1.36-2_arm64.buildinfo as libpdf-report-perl_1.36-2_arm64.buildinfo.asc Fri Jun 28 12:51:59 UTC 2024 I: Signed ./b1/libpdf-report-perl_1.36-2_arm64.buildinfo as ./b1/libpdf-report-perl_1.36-2_arm64.buildinfo.asc Fri Jun 28 12:51:59 UTC 2024 - build #1 for libpdf-report-perl/trixie/arm64 on codethink02-arm64 done. Starting cleanup. All cleanup done. Fri Jun 28 12:51:59 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-8QlVNlWQ, removing. /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Jun 28 12:52 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jun 28 12:51 b2 -rw-r--r-- 1 jenkins jenkins 2234 Jun 16 2022 libpdf-report-perl_1.36-2.dsc -rw------- 1 jenkins jenkins 3415 Jun 28 12:51 rbuildlog.nWBDe53 /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1: total 88 -rw-r--r-- 1 jenkins jenkins 21823 Jun 28 12:52 build.log -rw-r--r-- 1 jenkins jenkins 5044 Jun 28 12:52 libpdf-report-perl_1.36-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2234 Jun 28 12:52 libpdf-report-perl_1.36-2.dsc -rw-r--r-- 1 jenkins jenkins 26492 Jun 28 12:52 libpdf-report-perl_1.36-2_all.deb -rw-r--r-- 1 jenkins jenkins 4915 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5797 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1886 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 2071 Jun 28 12:52 libpdf-report-perl_1.36-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2: total 0 Fri Jun 28 12:52:00 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Jun 28 00:51:34 -12 2024 I: pbuilder-time-stamp: 1719579094 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libpdf-report-perl_1.36-2.dsc] I: copying [./libpdf-report-perl_1.36.orig.tar.gz] I: copying [./libpdf-report-perl_1.36-2.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jun 16 22:52:09 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libpdf-report-perl_1.36-2.dsc: no acceptable signature found dpkg-source: info: extracting libpdf-report-perl in libpdf-report-perl-1.36 dpkg-source: info: unpacking libpdf-report-perl_1.36.orig.tar.gz dpkg-source: info: unpacking libpdf-report-perl_1.36-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying example-paths I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2061534/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b157269c7f4646358f20fb5837bd0bfc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2061534' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_rgoJ --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1 --logfile b1/build.log libpdf-report-perl_1.36-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2061534/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libpdf-api2-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libpdf-api2-perl; however: Package libpdf-api2-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libfont-ttf-perl{a} libicu72{a} libio-string-perl{a} libmagic-mgc{a} libmagic1t64{a} libpdf-api2-perl{a} libpipeline1{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libimage-png-libpng-perl libltdl-dev libmail-sendmail-perl libpdf-api2-xs-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 20.5 MB of archives. After unpacking 96.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.23 [24.7 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-15 [159 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.1-8.1 [95.1 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-2 [1394 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-15 [683 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.16 [88.6 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-15 [1249 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.16 [891 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libio-string-perl all 1.08-4 [12.1 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libfont-ttf-perl all 1.06-2 [318 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpdf-api2-perl all 2.047-1 [1334 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 20.5 MB in 0s (91.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.23_all.deb ... Unpacking sensible-utils (0.0.23) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-15_arm64.deb ... Unpacking gettext-base (0.21-15) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-8.1_arm64.deb ... Unpacking bsdextrautils (2.40.1-8.1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_arm64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-15_all.deb ... Unpacking autopoint (0.21-15) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-15_arm64.deb ... Unpacking gettext (0.21-15) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../29-libio-string-perl_1.08-4_all.deb ... Unpacking libio-string-perl (1.08-4) ... Selecting previously unselected package libfont-ttf-perl. Preparing to unpack .../30-libfont-ttf-perl_1.06-2_all.deb ... Unpacking libfont-ttf-perl (1.06-2) ... Selecting previously unselected package libpdf-api2-perl. Preparing to unpack .../31-libpdf-api2-perl_2.047-1_all.deb ... Unpacking libpdf-api2-perl (2.047-1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../32-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8.1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.21-15) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up libio-string-perl (1.08-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-15) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.23) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libfont-ttf-perl (1.06-2) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-15) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up libpdf-api2-perl (2.047-1) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libpdf-report-perl-1.36/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libpdf-report-perl_1.36-2_source.changes dpkg-buildpackage: info: source package libpdf-report-perl dpkg-buildpackage: info: source version 1.36-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpdf-report-perl-1.36=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpdf-report-perl-1.36=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PDF::Report Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' cp lib/PDF/Report.pm blib/lib/PDF/Report.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing PDF::Report 1.36, Perl 5.038002, /usr/bin/perl t/00-load.t .. 1..1 ok 1 - use PDF::Report; ok t/pod.t ...... 1..1 ok 1 - POD test for blib/lib/PDF/Report.pm ok All tests successful. Files=2, Tests=2, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.31 cusr 0.05 csys = 0.40 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libpdf-report-perl/ make -j12 install DESTDIR=/build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' Manifying 1 pod document Installing /build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl/usr/share/perl5/PDF/Report.pm Installing /build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl/usr/share/man/man3/PDF::Report.3pm make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_compress -Ximage. make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' debian/rules override_dh_fixperms make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_fixperms chmod 644 debian/libpdf-report-perl/usr/share/doc/libpdf-report-perl/examples/image.* chmod 755 debian/libpdf-report-perl/usr/share/doc/libpdf-report-perl/examples/*.pl make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libpdf-report-perl' in '../libpdf-report-perl_1.36-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libpdf-report-perl_1.36-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libpdf-report-perl_1.36-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2061534 and its subdirectories I: Current time: Fri Jun 28 00:51:58 -12 2024 I: pbuilder-time-stamp: 1719579118 Fri Jun 28 12:52:00 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink01-arm64.debian.net. Fri Jun 28 12:52:00 UTC 2024 I: Preparing to do remote build '2' on codethink01-arm64.debian.net. Fri Jun 28 12:52:00 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Fri Jun 28 12:52:00 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-bc2if3' ==================================================================================== Thu Jul 31 19:15:02 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink01-arm64, called using "2 libpdf-report-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur 1.36-2" as arguments. Thu Jul 31 19:15:02 UTC 2025 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-HTFT3BIo" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Jul 31 19:15:02 UTC 2025 I: Downloading source for trixie/libpdf-report-perl=1.36-2 Reading package lists... NOTICE: 'libpdf-report-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (dsc) [2234 B] Get:2 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (tar) [21.0 kB] Get:3 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (diff) [5044 B] Fetched 28.3 kB in 0s (1709 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libpdf-report-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libpdf-report-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.3 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (dsc) [2234 B] Get:2 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (tar) [21.0 kB] Get:3 http://deb.debian.org/debian trixie/main libpdf-report-perl 1.36-2 (diff) [5044 B] Fetched 28.3 kB in 0s (1709 kB/s) Download complete and in download only mode ============================================================================= Re-Building libpdf-report-perl in trixie on arm64 on codethink01-arm64 now. Date: Thu Jul 31 20:15:02 BST 2025 Date UTC: Thu Jul 31 19:15:02 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_Aa5R + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libpdf-report-perl = debian-installer -o libpdf-report-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libpdf-report-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_Aa5R --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2 --logfile b2/build.log libpdf-report-perl_1.36-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build I: Current time: Fri Aug 1 09:15:02 +14 2025 I: pbuilder-time-stamp: 1753989302 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libpdf-report-perl_1.36-2.dsc] I: copying [./libpdf-report-perl_1.36.orig.tar.gz] I: copying [./libpdf-report-perl_1.36-2.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jun 16 22:52:09 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libpdf-report-perl_1.36-2.dsc: no acceptable signature found dpkg-source: info: extracting libpdf-report-perl in libpdf-report-perl-1.36 dpkg-source: info: unpacking libpdf-report-perl_1.36.orig.tar.gz dpkg-source: info: unpacking libpdf-report-perl_1.36-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying example-paths I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D01_modify_environment starting debug: Running on codethink01-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Jul 31 19:15 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="21" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.21(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2590436 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_Aa5R --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2 --logfile b2/build.log libpdf-report-perl_1.36-2.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 5 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libpdf-api2-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libpdf-api2-perl; however: Package libpdf-api2-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libfont-ttf-perl{a} libicu72{a} libio-string-perl{a} libmagic-mgc{a} libmagic1t64{a} libpdf-api2-perl{a} libpipeline1{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libimage-png-libpng-perl libltdl-dev libmail-sendmail-perl libpdf-api2-xs-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 20.5 MB of archives. After unpacking 96.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.23 [24.7 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.21-15 [159 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-4 [1130 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.1-8.1 [95.1 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.7-2 [36.5 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.12.1-2 [1394 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.21-15 [683 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.16 [88.6 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-1+b1 [187 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-4+b1 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.21-15 [1249 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.16 [891 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libio-string-perl all 1.08-4 [12.1 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libfont-ttf-perl all 1.06-2 [318 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpdf-api2-perl all 2.047-1 [1334 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 20.5 MB in 0s (120 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.23_all.deb ... Unpacking sensible-utils (0.0.23) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-15_arm64.deb ... Unpacking gettext-base (0.21-15) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_arm64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-8.1_arm64.deb ... Unpacking bsdextrautils (2.40.1-8.1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_arm64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-15_all.deb ... Unpacking autopoint (0.21-15) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-4+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-4+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-15_arm64.deb ... Unpacking gettext (0.21-15) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../29-libio-string-perl_1.08-4_all.deb ... Unpacking libio-string-perl (1.08-4) ... Selecting previously unselected package libfont-ttf-perl. Preparing to unpack .../30-libfont-ttf-perl_1.06-2_all.deb ... Unpacking libfont-ttf-perl (1.06-2) ... Selecting previously unselected package libpdf-api2-perl. Preparing to unpack .../31-libpdf-api2-perl_2.047-1_all.deb ... Unpacking libpdf-api2-perl (2.047-1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../32-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.7-2) ... Setting up libicu72:arm64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-8.1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.21-15) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-1+b1) ... Setting up libio-string-perl (1.08-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-15) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.23) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libfont-ttf-perl (1.06-2) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-15) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up libpdf-api2-perl (2.047-1) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Processing triggers for libc-bin (2.38-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libpdf-report-perl-1.36/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libpdf-report-perl_1.36-2_source.changes dpkg-buildpackage: info: source package libpdf-report-perl dpkg-buildpackage: info: source version 1.36-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpdf-report-perl-1.36=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libpdf-report-perl-1.36=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PDF::Report Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' cp lib/PDF/Report.pm blib/lib/PDF/Report.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing PDF::Report 1.36, Perl 5.038002, /usr/bin/perl t/00-load.t .. 1..1 ok 1 - use PDF::Report; ok t/pod.t ...... 1..1 ok 1 - POD test for blib/lib/PDF/Report.pm ok All tests successful. Files=2, Tests=2, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.31 cusr 0.06 csys = 0.40 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libpdf-report-perl/ make -j12 install DESTDIR=/build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' Manifying 1 pod document Installing /build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl/usr/share/perl5/PDF/Report.pm Installing /build/reproducible-path/libpdf-report-perl-1.36/debian/libpdf-report-perl/usr/share/man/man3/PDF::Report.3pm make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_compress -Ximage. make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' debian/rules override_dh_fixperms make[1]: Entering directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_fixperms chmod 644 debian/libpdf-report-perl/usr/share/doc/libpdf-report-perl/examples/image.* chmod 755 debian/libpdf-report-perl/usr/share/doc/libpdf-report-perl/examples/*.pl make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libpdf-report-perl' in '../libpdf-report-perl_1.36-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libpdf-report-perl_1.36-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libpdf-report-perl_1.36-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2590436 and its subdirectories I: Current time: Fri Aug 1 09:15:27 +14 2025 I: pbuilder-time-stamp: 1753989327 + false + set +x Thu Jul 31 19:15:27 UTC 2025 I: Signing ./b2/libpdf-report-perl_1.36-2_arm64.buildinfo as libpdf-report-perl_1.36-2_arm64.buildinfo.asc Thu Jul 31 19:15:27 UTC 2025 I: Signed ./b2/libpdf-report-perl_1.36-2_arm64.buildinfo as ./b2/libpdf-report-perl_1.36-2_arm64.buildinfo.asc Thu Jul 31 19:15:27 UTC 2025 - build #2 for libpdf-report-perl/trixie/arm64 on codethink01-arm64 done. Starting cleanup. All cleanup done. Thu Jul 31 19:15:27 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-HTFT3BIo, removing. /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Jun 28 12:52 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jun 28 12:52 b2 -rw-r--r-- 1 jenkins jenkins 2234 Jun 16 2022 libpdf-report-perl_1.36-2.dsc -rw------- 1 jenkins jenkins 25539 Jun 28 12:52 rbuildlog.nWBDe53 /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1: total 88 -rw-r--r-- 1 jenkins jenkins 21823 Jun 28 12:52 build.log -rw-r--r-- 1 jenkins jenkins 5044 Jun 28 12:52 libpdf-report-perl_1.36-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2234 Jun 28 12:52 libpdf-report-perl_1.36-2.dsc -rw-r--r-- 1 jenkins jenkins 26492 Jun 28 12:52 libpdf-report-perl_1.36-2_all.deb -rw-r--r-- 1 jenkins jenkins 4915 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5797 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1886 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 2071 Jun 28 12:52 libpdf-report-perl_1.36-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2: total 88 -rw-r--r-- 1 jenkins jenkins 23774 Jun 28 12:52 build.log -rw-r--r-- 1 jenkins jenkins 5044 Jun 28 12:52 libpdf-report-perl_1.36-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2234 Jun 28 12:52 libpdf-report-perl_1.36-2.dsc -rw-r--r-- 1 jenkins jenkins 26492 Jun 28 12:52 libpdf-report-perl_1.36-2_all.deb -rw-r--r-- 1 jenkins jenkins 4915 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5797 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1886 Jun 28 12:52 libpdf-report-perl_1.36-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 2071 Jun 28 12:52 libpdf-report-perl_1.36-2_source.changes Fri Jun 28 12:52:28 UTC 2024 I: Deleting $TMPDIR on codethink01-arm64.debian.net. Fri Jun 28 12:52:29 UTC 2024 I: libpdf-report-perl_1.36-2_arm64.changes: Format: 1.8 Date: Thu, 16 Jun 2022 23:51:46 +0100 Source: libpdf-report-perl Binary: libpdf-report-perl Architecture: all Version: 1.36-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libpdf-report-perl - simplified PDF report generator Changes: libpdf-report-perl (1.36-2) unstable; urgency=medium . [ gregor herrmann ] * Strip trailing slash from metacpan URLs. . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Nathan Handler from Uploaders. Thanks for your work! * Remove Ryan Niebur from Uploaders. Thanks for your work! . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/watch: use uscan version 4. . [ Debian Janitor ] * Trim trailing whitespace. * Bump debhelper from deprecated 8 to 12. * Set debhelper-compat version in Build-Depends. * Set upstream metadata fields: Bug-Database, Bug-Submit, Repository, Repository-Browse. Checksums-Sha1: b8bbba1b1888da7b833f0fc2a30df9b126e1bd3d 26492 libpdf-report-perl_1.36-2_all.deb 75bcaaaf3c5323e70e951369f9042f5496200ee5 4915 libpdf-report-perl_1.36-2_arm64.buildinfo Checksums-Sha256: 840ffe17824b15d2f724b044e5edf2a11ff3629828e69a314c239aa34fb1b350 26492 libpdf-report-perl_1.36-2_all.deb 9d0425ddb3b73db80dbef90d8ff460c75f94ed9a600764b7e520b1713933aaad 4915 libpdf-report-perl_1.36-2_arm64.buildinfo Files: b38dfa61b6d5c5ca230fa8fdaeb99378 26492 perl optional libpdf-report-perl_1.36-2_all.deb d61785ee76dfe959072390c1409fec83 4915 perl optional libpdf-report-perl_1.36-2_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libpdf-report-perl_1.36-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libpdf-report-perl_1.36-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libpdf-report-perl_1.36-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libpdf-report-perl_1.36-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libpdf-report-perl_1.36-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libpdf-report-perl_1.36-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-06-28 12:52:00.004988921 +0000 +++ b2/build.log 2024-06-28 12:52:28.623776891 +0000 @@ -1,6 +1,7 @@ +W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build -I: Current time: Fri Jun 28 00:51:34 -12 2024 -I: pbuilder-time-stamp: 1719579094 +I: Current time: Fri Aug 1 09:15:02 +14 2025 +I: pbuilder-time-stamp: 1753989302 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -27,52 +28,83 @@ dpkg-source: info: applying example-paths I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/2061534/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D01_modify_environment starting +debug: Running on codethink01-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Jul 31 19:15 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="21" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.21(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='b157269c7f4646358f20fb5837bd0bfc' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='2061534' - PS1='# ' - PS2='> ' + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2590436 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_rgoJ --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1 --logfile b1/build.log libpdf-report-perl_1.36-2.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/pbuilderrc_Aa5R --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2 --logfile b2/build.log libpdf-report-perl_1.36-2.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink02-arm64 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-21-cloud-arm64 #1 SMP Debian 6.1.90-1 (2024-05-03) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Jun 5 22:35 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/2061534/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Jun 5 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -145,7 +177,7 @@ Get: 31 http://deb.debian.org/debian trixie/main arm64 libfont-ttf-perl all 1.06-2 [318 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpdf-api2-perl all 2.047-1 [1334 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] -Fetched 20.5 MB in 0s (91.5 MB/s) +Fetched 20.5 MB in 0s (120 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19809 files and directories currently installed.) @@ -297,7 +329,11 @@ fakeroot is already the newest version (1.33-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libpdf-report-perl-1.36/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libpdf-report-perl_1.36-2_source.changes +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libpdf-report-perl-1.36/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libpdf-report-perl_1.36-2_source.changes dpkg-buildpackage: info: source package libpdf-report-perl dpkg-buildpackage: info: source version 1.36-2 dpkg-buildpackage: info: source distribution unstable @@ -338,7 +374,7 @@ ok 1 - POD test for blib/lib/PDF/Report.pm ok All tests successful. -Files=2, Tests=2, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.31 cusr 0.05 csys = 0.40 CPU) +Files=2, Tests=2, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.31 cusr 0.06 csys = 0.40 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libpdf-report-perl-1.36' create-stamp debian/debhelper-build-stamp @@ -383,12 +419,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2590436/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/2061534 and its subdirectories -I: Current time: Fri Jun 28 00:51:58 -12 2024 -I: pbuilder-time-stamp: 1719579118 +I: removing directory /srv/workspace/pbuilder/2590436 and its subdirectories +I: Current time: Fri Aug 1 09:15:27 +14 2025 +I: pbuilder-time-stamp: 1753989327 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libpdf-report-perl_1.36-2.diff: 66.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libpdf-report-perl_1.36-2.diff.gz b2/build.log: 73.7% -- replaced with stdout Compressing the 1st log... b1/build.log: 74.5% -- replaced with stdout Fri Jun 28 12:52:30 UTC 2024 I: diffoscope 271 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libpdf-report-perl_trixie_arm64_1719579150 + touch /var/log/reproducible-builds/diffoscope_stamp_libpdf-report-perl_trixie_arm64_1719579150 + RESULT=0 + systemd-run '--description=diffoscope on libpdf-report-perl/1.36-2 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_16-16898 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur --run-session -c jenkins-reproducible-trixie-diffoscope-6ca0871b-c9ee-4a6f-a078-f34f06eb9b67 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/dbd-tmp-hqDLOQG ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/libpdf-report-perl_1.36-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/libpdf-report-perl_1.36-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/libpdf-report-perl_1.36-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1/libpdf-report-perl_1.36-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2/libpdf-report-perl_1.36-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_16-16898.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/libpdf-report-perl_1.36-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/libpdf-report-perl_1.36-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/libpdf-report-perl_1.36-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b1/libpdf-report-perl_1.36-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.b21g2Mur/b2/libpdf-report-perl_1.36-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.355s) 0.355s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 681ms CPU time consumed: 681ms _ _ _ _ __ _ | (_) |__ _ __ __| |/ _| _ __ ___ _ __ ___ _ __| |_ _ __ ___ | | | '_ \| '_ \ / _` | |_ _____| '__/ _ \ '_ \ / _ \| '__| __|____| '_ \ / _ \ | | | |_) | |_) | (_| | _|_____| | | __/ |_) | (_) | | | ||_____| |_) | __/ |_|_|_.__/| .__/ \__,_|_| |_| \___| .__/ \___/|_| \__| | .__/ \___| |_| |_| |_| _ _ __| | | '__| | | | | | |_| |_| Fri Jun 28 12:52:31 UTC 2024 I: diffoscope 271 found no differences in the changes files, and a .buildinfo file also exists. Fri Jun 28 12:52:31 UTC 2024 I: libpdf-report-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-06-28 12:52:32] INFO: Starting at 2024-06-28 12:52:32.412183 [2024-06-28 12:52:32] INFO: Generating the pages of 1 package(s) [2024-06-28 12:52:32] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libpdf-report-perl didn't produce a buildlog, even though it has been built. [2024-06-28 12:52:32] INFO: Finished at 2024-06-28 12:52:32.906280, took: 0:00:00.494105 Fri Jun 28 12:52:32 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libpdf-report-perl.html Fri Jun 28 12:52:32 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Jun 28 12:52:33 UTC 2024 I: Submitting 8.0K b1/libpdf-report-perl_1.36-2_arm64.buildinfo.asc https://buildinfo.debian.net/75bcaaaf3c5323e70e951369f9042f5496200ee5/libpdf-report-perl_1.36-2_all Fri Jun 28 12:52:33 UTC 2024 I: Submitting 8.0K b2/libpdf-report-perl_1.36-2_arm64.buildinfo.asc https://buildinfo.debian.net/f680a249b1c6d9aed79891e1765c1fedb36f0120/libpdf-report-perl_1.36-2_all Fri Jun 28 12:52:34 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jun 28 12:52:34 UTC 2024 I: Done submitting .buildinfo files. Fri Jun 28 12:52:34 UTC 2024 I: Removing signed libpdf-report-perl_1.36-2_arm64.buildinfo.asc files: removed './b1/libpdf-report-perl_1.36-2_arm64.buildinfo.asc' removed './b2/libpdf-report-perl_1.36-2_arm64.buildinfo.asc' 1719579154 arm64 trixie libpdf-report-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libpdf-report-perl_1.36-2.rbuild.log: 71.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libpdf-report-perl_1.36-2.rbuild.log.gz [2024-06-28 12:52:34] INFO: Starting at 2024-06-28 12:52:34.814444 [2024-06-28 12:52:34] INFO: Generating the pages of 1 package(s) [2024-06-28 12:52:35] INFO: Finished at 2024-06-28 12:52:35.318536, took: 0:00:00.504099 All cleanup done. Fri Jun 28 12:52:35 UTC 2024 - total duration: 0h 1m 20s. Fri Jun 28 12:52:35 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-ZsXAKZZa, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 23.633s CPU time consumed: 8.083s