Running as unit: rb-build-arm64_17-64722.service ==================================================================================== Fri Nov 22 14:55:09 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_17) on jenkins, called using "codethink03-arm64 codethink01-arm64" as arguments. Fri Nov 22 14:55:09 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-USqOLdOe" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 14:55:09 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Nov 22 14:55:09 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-IhjC84' Fri Nov 22 14:55:10 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Fri Nov 22 14:55:10 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-uey9cJ' ok, let's check if arduino-core-avr is building anywhere yet… ok, arduino-core-avr is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of arduino-core-avr in unstable on arm64 on jenkins now. 1st build will be done on codethink03-arm64.debian.net. 2nd build will be done on codethink01-arm64.debian.net. ============================================================================= Fri Nov 22 14:55:27 UTC 2024 I: starting to build arduino-core-avr/unstable/arm64 on jenkins on '2024-11-22 14:55' Fri Nov 22 14:55:27 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_17/64722/console.log 1732287327 arm64 unstable arduino-core-avr Fri Nov 22 14:55:27 UTC 2024 I: Downloading source for unstable/arduino-core-avr=1.8.6+dfsg-1 --2024-11-22 14:55:27-- http://deb.debian.org/debian/pool/main/a/arduino-core-avr/arduino-core-avr_1.8.6%2bdfsg-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2136 (2.1K) [text/prs.lines.tag] Saving to: ‘arduino-core-avr_1.8.6+dfsg-1.dsc’ 0K .. 100% 2.46M=0.001s 2024-11-22 14:55:27 (2.46 MB/s) - ‘arduino-core-avr_1.8.6+dfsg-1.dsc’ saved [2136/2136] --2024-11-22 14:55:27-- http://deb.debian.org/debian/pool/main/a/arduino-core-avr/arduino-core-avr_1.8.6%2bdfsg-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2136 (2.1K) [text/prs.lines.tag] Saving to: ‘arduino-core-avr_1.8.6+dfsg-1.dsc’ 0K .. 100% 2.46M=0.001s 2024-11-22 14:55:27 (2.46 MB/s) - ‘arduino-core-avr_1.8.6+dfsg-1.dsc’ saved [2136/2136] Fri Nov 22 14:55:27 UTC 2024 I: arduino-core-avr_1.8.6+dfsg-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: arduino-core-avr Binary: arduino-core-avr Architecture: all Version: 1.8.6+dfsg-1 Maintainer: Debian Electronics Team Uploaders: Carsten Schoenert , Homepage: https://github.com/arduino/ArduinoCore-avr Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/electronics-team/arduino/arduino-core-avr Vcs-Git: https://salsa.debian.org/electronics-team/arduino/arduino-core-avr.git Build-Depends: avr-libc, debhelper-compat (= 13), gcc-avr Package-List: arduino-core-avr deb utils optional arch=all Checksums-Sha1: dd97479ab9df4f636ba46b3edacfbe8095abc310 194628 arduino-core-avr_1.8.6+dfsg.orig.tar.xz f1d3de138f9b940bc51b8bfffb912f434d607cb2 9852 arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz Checksums-Sha256: ec928406ddb99e7de502eefac74ec96eff93a30e5b2be7a7f66c1cef266a1d03 194628 arduino-core-avr_1.8.6+dfsg.orig.tar.xz 37e6725757b28fd564d5d6258a221f0aa5e00c572d1a574b8dd3e7bc0471e3eb 9852 arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz Files: 45dffe6cb10d51f490bc82ba3e92b013 194628 arduino-core-avr_1.8.6+dfsg.orig.tar.xz 0db6c9939a53fdffbdaea3312ad819cd 9852 arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJMBAEBCgA2FiEEtw38bxNP7PwBHmKqgwFgFCUdHbAFAmNnVPsYHGMuc2Nob2Vu ZXJ0QHQtb25saW5lLmRlAAoJEIMBYBQlHR2whzMP/35468L1Pw3hWIvx92zDL4dd Qh0obPo5loGRo9g9afQ1mSdsKwl4fvoWIy8nc1leDbBFKCP8bFqBIotreilajDz1 35SH5cqYmRlO644PMwWtCTHv8CB+kDFRBbEsbrhXYk8C1pDbFHpoNWGRxzAABnFd YzCXiCeVZ9K1ZvErcjuFqkHZJmZ4e22rFNmzHQVAozye4FhehdJ2syYv3gjootLH TSDxFtMrDa/ZLbQnGTfOlH8YR3S8lBsPEPq9DGeuwVZamLm6lzGpWi102mAZ+6Ro ANvVulRSnWUun2ziv5GbbUAD47MnxZcpNV52h7SPb3wFpUC6P1iUSpZPCrjyS6+V iSoSNgb3/jALBsBKgWLMTFhbtemL9+OuXdK1aS+s/InqCaUJsdifySTPIuFqEorR 1zZGT4tGSQHCq+qBlAak6IxatHom/CKXE9mLWXZ0jKzmeHL5NTdOKIER191Xnqyp 4lkbF6VX1ln8JmnfBBUXQWWDOUwA2ymJcLkpknKcQhMEYfktyknmIb5ih/ZQMp4g Xj6x8V+d9rzZeu2PSW53KJAhC8EKNanno2iCnaP9vui1q5fXBX+pN3/bdCwcM/37 ePG9LIsb0XfQrj2bPqRj2txohJZG+R2/U5Cmtb0tq44DbXIwXI7JgPmduZzhLacP AjJJ3zf7GPRjzgSJwLn6 =eo0A -----END PGP SIGNATURE----- Fri Nov 22 14:55:27 UTC 2024 I: Checking whether the package is not for us Fri Nov 22 14:55:27 UTC 2024 I: Starting 1st build on remote node codethink03-arm64.debian.net. Fri Nov 22 14:55:27 UTC 2024 I: Preparing to do remote build '1' on codethink03-arm64.debian.net. Fri Nov 22 14:55:27 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Nov 22 14:55:27 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-i7ahYp' ==================================================================================== Thu Dec 25 21:18:29 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "1 arduino-core-avr unstable /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj 1.8.6+dfsg-1" as arguments. Thu Dec 25 21:18:29 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-n0UCbGE1" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Dec 25 21:18:29 UTC 2025 I: Downloading source for unstable/arduino-core-avr=1.8.6+dfsg-1 Reading package lists... NOTICE: 'arduino-core-avr' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/electronics-team/arduino/arduino-core-avr.git Please use: git clone https://salsa.debian.org/electronics-team/arduino/arduino-core-avr.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 207 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main arduino-core-avr 1.8.6+dfsg-1 (dsc) [2136 B] Get:2 http://deb.debian.org/debian unstable/main arduino-core-avr 1.8.6+dfsg-1 (tar) [195 kB] Get:3 http://deb.debian.org/debian unstable/main arduino-core-avr 1.8.6+dfsg-1 (diff) [9852 B] Fetched 207 kB in 0s (14.2 MB/s) Download complete and in download only mode Reading package lists... NOTICE: 'arduino-core-avr' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/electronics-team/arduino/arduino-core-avr.git Please use: git clone https://salsa.debian.org/electronics-team/arduino/arduino-core-avr.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 207 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main arduino-core-avr 1.8.6+dfsg-1 (dsc) [2136 B] Get:2 http://deb.debian.org/debian unstable/main arduino-core-avr 1.8.6+dfsg-1 (tar) [195 kB] Get:3 http://deb.debian.org/debian unstable/main arduino-core-avr 1.8.6+dfsg-1 (diff) [9852 B] Fetched 207 kB in 0s (14.2 MB/s) Download complete and in download only mode ============================================================================= Building arduino-core-avr in unstable on arm64 on codethink03-arm64 now. Date: Thu Dec 25 21:18:29 GMT 2025 Date UTC: Thu Dec 25 21:18:29 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 09:18:29 -12 2025 I: pbuilder-time-stamp: 1766697509 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [arduino-core-avr_1.8.6+dfsg-1.dsc] I: copying [./arduino-core-avr_1.8.6+dfsg.orig.tar.xz] I: copying [./arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Nov 6 06:32:27 2022 gpgv: using RSA key B70DFC6F134FECFC011E62AA83016014251D1DB0 gpgv: issuer "c.schoenert@t-online.de" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./arduino-core-avr_1.8.6+dfsg-1.dsc: no acceptable signature found dpkg-source: info: extracting arduino-core-avr in arduino-core-avr-1.8.6+dfsg dpkg-source: info: unpacking arduino-core-avr_1.8.6+dfsg.orig.tar.xz dpkg-source: info: unpacking arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying debian-hacks/Don-t-use-DIRAVRBIN-variable-in-bootloaders-atmega8.patch dpkg-source: info: applying debian-hacks/Adjust-paths-for-gcc-avr-and-avrdude.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3913366/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='d6e00c49d56f494c954535690ffb80fb' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3913366' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj/pbuilderrc_SdTN --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj/b1 --logfile b1/build.log arduino-core-avr_1.8.6+dfsg-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3913366/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: avr-libc, debhelper-compat (= 13), gcc-avr dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on avr-libc; however: Package avr-libc is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on gcc-avr; however: Package gcc-avr is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} avr-libc{a} binutils-avr{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gcc-avr{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 72.0 MB of archives. After unpacking 411 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 binutils-avr arm64 2.43.1-1+b1 [1884 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 gcc-avr arm64 1:14.2.0-2 [45.5 MB] Get: 18 http://deb.debian.org/debian unstable/main arm64 avr-libc all 1:2.0.0+Atmel3.7.0-1 [5166 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Fetched 72.0 MB in 0s (150 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package binutils-avr. Preparing to unpack .../15-binutils-avr_2.43.1-1+b1_arm64.deb ... Unpacking binutils-avr (2.43.1-1+b1) ... Selecting previously unselected package gcc-avr. Preparing to unpack .../16-gcc-avr_1%3a14.2.0-2_arm64.deb ... Unpacking gcc-avr (1:14.2.0-2) ... Selecting previously unselected package avr-libc. Preparing to unpack .../17-avr-libc_1%3a2.0.0+Atmel3.7.0-1_all.deb ... Unpacking avr-libc (1:2.0.0+Atmel3.7.0-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../24-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../26-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up binutils-avr (2.43.1-1+b1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up gcc-avr (1:14.2.0-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up avr-libc (1:2.0.0+Atmel3.7.0-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/arduino-core-avr-1.8.6+dfsg/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../arduino-core-avr_1.8.6+dfsg-1_source.changes dpkg-buildpackage: info: source package arduino-core-avr dpkg-buildpackage: info: source version 1.8.6+dfsg-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Carsten Schoenert dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/arduino-core-avr/ debian/rules override_dh_install make[1]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg' (Re)build .hex files for Atmega bootloaders... make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168_atmega328.hex rm ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168.o make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328_notp ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328_notp.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328_notp.elf ATmegaBOOT_168_atmega328_notp.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_atmega328_notp.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328_pro8 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328_pro_8MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328_pro_8MHz.elf ATmegaBOOT_168_atmega328_pro_8MHz.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_atmega328_pro_8MHz.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target diecimila ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_diecimila.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_diecimila.elf ATmegaBOOT_168_diecimila.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_diecimila.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target lilypad ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_lilypad.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_lilypad.elf ATmegaBOOT_168_lilypad.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_lilypad.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target lilypad_resonator ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_lilypad_resonator.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_lilypad_resonator.elf ATmegaBOOT_168_lilypad_resonator.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_lilypad_resonator.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target mega ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega1280 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega1280 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x1F000 -o ATmegaBOOT_168_atmega1280.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega1280.elf ATmegaBOOT_168_atmega1280.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_atmega1280.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target ng ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_ng.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_ng.elf ATmegaBOOT_168_ng.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_ng.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro16 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168_pro_16MHz.hex rm ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168.o make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro20 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=20000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=20000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_20mhz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_20mhz.elf ATmegaBOOT_168_pro_20mhz.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_pro_20mhz.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro8 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_8MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_8MHz.elf ATmegaBOOT_168_pro_8MHz.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_pro_8MHz.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' (Re)build .hex file for Atmega8 bootloader... # Folder 'bootloaders/atmega8' make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' rm -rf *.s rm -rf *.o *.elf rm -rf *.lst *.map make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' avr-gcc -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT.o ATmegaBOOT.c avr-gcc -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -Wl,-Map,ATmegaBOOT.map,--section-start=.text=0x1c00 -o ATmegaBOOT.elf ATmegaBOOT.o /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: address 0x2004 of ATmegaBOOT.elf section `.text' is not within region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: ATmegaBOOT.elf section `.data' will not fit in region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: address 0x2004 of ATmegaBOOT.elf section `.text' is not within region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: region `text' overflowed by 6 bytes collect2: error: ld returned 1 exit status make[2]: *** [Makefile:53: ATmegaBOOT.elf] Error 1 make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' make[1]: *** [debian/rules:38: override_dh_install] Error 2 make[1]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg' make: *** [debian/rules:32: binary] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3913366 and its subdirectories Starting cleanup. All cleanup done. Thu Dec 25 21:18:53 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-n0UCbGE1, removing. /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj: total 16 -rw-r--r-- 1 jenkins jenkins 2136 Nov 6 2022 arduino-core-avr_1.8.6+dfsg-1.dsc drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 14:55 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 14:55 b2 -rw------- 1 jenkins jenkins 3341 Nov 22 14:55 rbuildlog.rOZDZCT /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj/b1: total 32 -rw-r--r-- 1 jenkins jenkins 29370 Nov 22 14:55 build.log /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj/b2: total 0 Fri Nov 22 14:55:54 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 09:18:29 -12 2025 I: pbuilder-time-stamp: 1766697509 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [arduino-core-avr_1.8.6+dfsg-1.dsc] I: copying [./arduino-core-avr_1.8.6+dfsg.orig.tar.xz] I: copying [./arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Nov 6 06:32:27 2022 gpgv: using RSA key B70DFC6F134FECFC011E62AA83016014251D1DB0 gpgv: issuer "c.schoenert@t-online.de" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./arduino-core-avr_1.8.6+dfsg-1.dsc: no acceptable signature found dpkg-source: info: extracting arduino-core-avr in arduino-core-avr-1.8.6+dfsg dpkg-source: info: unpacking arduino-core-avr_1.8.6+dfsg.orig.tar.xz dpkg-source: info: unpacking arduino-core-avr_1.8.6+dfsg-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying debian-hacks/Don-t-use-DIRAVRBIN-variable-in-bootloaders-atmega8.patch dpkg-source: info: applying debian-hacks/Adjust-paths-for-gcc-avr-and-avrdude.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3913366/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='d6e00c49d56f494c954535690ffb80fb' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3913366' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj/pbuilderrc_SdTN --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RMjBJWRj/b1 --logfile b1/build.log arduino-core-avr_1.8.6+dfsg-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3913366/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: avr-libc, debhelper-compat (= 13), gcc-avr dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on avr-libc; however: Package avr-libc is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on gcc-avr; however: Package gcc-avr is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} avr-libc{a} binutils-avr{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gcc-avr{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 72.0 MB of archives. After unpacking 411 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 binutils-avr arm64 2.43.1-1+b1 [1884 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 gcc-avr arm64 1:14.2.0-2 [45.5 MB] Get: 18 http://deb.debian.org/debian unstable/main arm64 avr-libc all 1:2.0.0+Atmel3.7.0-1 [5166 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libtool all 2.4.7-8 [517 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 25 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.20 [915 kB] Fetched 72.0 MB in 0s (150 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20084 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package binutils-avr. Preparing to unpack .../15-binutils-avr_2.43.1-1+b1_arm64.deb ... Unpacking binutils-avr (2.43.1-1+b1) ... Selecting previously unselected package gcc-avr. Preparing to unpack .../16-gcc-avr_1%3a14.2.0-2_arm64.deb ... Unpacking gcc-avr (1:14.2.0-2) ... Selecting previously unselected package avr-libc. Preparing to unpack .../17-avr-libc_1%3a2.0.0+Atmel3.7.0-1_all.deb ... Unpacking avr-libc (1:2.0.0+Atmel3.7.0-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../24-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../26-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up binutils-avr (2.43.1-1+b1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up gcc-avr (1:14.2.0-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up avr-libc (1:2.0.0+Atmel3.7.0-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/arduino-core-avr-1.8.6+dfsg/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../arduino-core-avr_1.8.6+dfsg-1_source.changes dpkg-buildpackage: info: source package arduino-core-avr dpkg-buildpackage: info: source version 1.8.6+dfsg-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Carsten Schoenert dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/arduino-core-avr/ debian/rules override_dh_install make[1]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg' (Re)build .hex files for Atmega bootloaders... make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168_atmega328.hex rm ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168.o make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328_notp ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328_notp.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328_notp.elf ATmegaBOOT_168_atmega328_notp.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_atmega328_notp.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328_pro8 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328_pro_8MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328_pro_8MHz.elf ATmegaBOOT_168_atmega328_pro_8MHz.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_atmega328_pro_8MHz.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target diecimila ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_diecimila.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_diecimila.elf ATmegaBOOT_168_diecimila.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_diecimila.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target lilypad ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_lilypad.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_lilypad.elf ATmegaBOOT_168_lilypad.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_lilypad.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target lilypad_resonator ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_lilypad_resonator.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_lilypad_resonator.elf ATmegaBOOT_168_lilypad_resonator.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_lilypad_resonator.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target mega ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega1280 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega1280 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x1F000 -o ATmegaBOOT_168_atmega1280.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega1280.elf ATmegaBOOT_168_atmega1280.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_atmega1280.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target ng ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_ng.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_ng.elf ATmegaBOOT_168_ng.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_ng.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro16 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168_pro_16MHz.hex rm ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168.o make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro20 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=20000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=20000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_20mhz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_20mhz.elf ATmegaBOOT_168_pro_20mhz.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_pro_20mhz.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro8 ############################## make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_8MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_8MHz.elf ATmegaBOOT_168_pro_8MHz.hex rm ATmegaBOOT_168.o ATmegaBOOT_168_pro_8MHz.elf make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega' (Re)build .hex file for Atmega8 bootloader... # Folder 'bootloaders/atmega8' make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' rm -rf *.s rm -rf *.o *.elf rm -rf *.lst *.map make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' make[2]: Entering directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' avr-gcc -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT.o ATmegaBOOT.c avr-gcc -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -Wl,-Map,ATmegaBOOT.map,--section-start=.text=0x1c00 -o ATmegaBOOT.elf ATmegaBOOT.o /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: address 0x2004 of ATmegaBOOT.elf section `.text' is not within region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: ATmegaBOOT.elf section `.data' will not fit in region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: address 0x2004 of ATmegaBOOT.elf section `.text' is not within region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: region `text' overflowed by 6 bytes collect2: error: ld returned 1 exit status make[2]: *** [Makefile:53: ATmegaBOOT.elf] Error 1 make[2]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg/bootloaders/atmega8' make[1]: *** [debian/rules:38: override_dh_install] Error 2 make[1]: Leaving directory '/build/reproducible-path/arduino-core-avr-1.8.6+dfsg' make: *** [debian/rules:32: binary] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3913366 and its subdirectories arduino-core-avr failed to build from source. removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.build1.log.gz' Fri Nov 22 14:55:55 UTC 2024 W: No second build log, what happened? Compressing the 1st log... b1/build.log: 80.7% -- replaced with stdout INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-22 14:55:56] INFO: Starting at 2024-11-22 14:55:56.392284 [2024-11-22 14:55:56] INFO: Generating the pages of 1 package(s) [2024-11-22 14:55:56] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/arm64/arduino-core-avr didn't produce a buildlog, even though it has been built. [2024-11-22 14:55:56] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:56] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:56] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:56] INFO: Finished at 2024-11-22 14:55:56.789317, took: 0:00:00.397041 Fri Nov 22 14:55:56 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/arm64/arduino-core-avr.html Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.rbuild.log: 77.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.rbuild.log.gz [2024-11-22 14:55:57] INFO: Starting at 2024-11-22 14:55:57.168428 [2024-11-22 14:55:57] INFO: Generating the pages of 1 package(s) [2024-11-22 14:55:57] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:57] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:57] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:57] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/arduino-core-avr_1.8.6+dfsg-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/arduino-core-avr_1.8.6+dfsg-1.diff.gz is missing [2024-11-22 14:55:57] INFO: Finished at 2024-11-22 14:55:57.553932, took: 0:00:00.385510 All cleanup done. Fri Nov 22 14:55:57 UTC 2024 - total duration: 0h 0m 46s. Fri Nov 22 14:55:57 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-USqOLdOe, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 47.847s CPU time consumed: 5.112s