Running as unit: rb-build-arm64_18-69379.service ==================================================================================== Mon Nov 25 15:42:04 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_18) on jenkins, called using "codethink04-arm64 codethink01-arm64" as arguments. Mon Nov 25 15:42:04 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-QfpXME0k" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Nov 25 15:42:04 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Mon Nov 25 15:42:04 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-SzLDdD' Mon Nov 25 15:42:05 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Mon Nov 25 15:42:05 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-q1JmgX' ok, let's check if system-config-printer is building anywhere yet… ok, system-config-printer is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of system-config-printer in trixie on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink01-arm64.debian.net. ============================================================================= Mon Nov 25 15:42:12 UTC 2024 I: starting to build system-config-printer/trixie/arm64 on jenkins on '2024-11-25 15:42' Mon Nov 25 15:42:12 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_18/69379/console.log 1732549332 arm64 trixie system-config-printer Mon Nov 25 15:42:12 UTC 2024 I: Downloading source for trixie/system-config-printer=1.5.18-3 --2024-11-25 15:42:12-- http://deb.debian.org/debian/pool/main/s/system-config-printer/system-config-printer_1.5.18-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2660 (2.6K) [text/prs.lines.tag] Saving to: ‘system-config-printer_1.5.18-3.dsc’ 0K .. 100% 296M=0s 2024-11-25 15:42:12 (296 MB/s) - ‘system-config-printer_1.5.18-3.dsc’ saved [2660/2660] --2024-11-25 15:42:12-- http://deb.debian.org/debian/pool/main/s/system-config-printer/system-config-printer_1.5.18-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2660 (2.6K) [text/prs.lines.tag] Saving to: ‘system-config-printer_1.5.18-3.dsc’ 0K .. 100% 296M=0s 2024-11-25 15:42:12 (296 MB/s) - ‘system-config-printer_1.5.18-3.dsc’ saved [2660/2660] Mon Nov 25 15:42:12 UTC 2024 I: system-config-printer_1.5.18-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: system-config-printer Binary: system-config-printer, system-config-printer-common, python3-cupshelpers, system-config-printer-udev Architecture: linux-any all Version: 1.5.18-3 Maintainer: Debian GNOME Maintainers Uploaders: Jeremy Bícha , Guido Günther , Dmitry Shachnev , Laurent Bigonville Homepage: https://github.com/OpenPrinting/system-config-printer Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/gnome-team/system-config-printer Vcs-Git: https://salsa.debian.org/gnome-team/system-config-printer.git Build-Depends: debhelper-compat (= 13), debhelper (>= 13.11.6), autoconf-archive, dh-sequence-gnome, dh-sequence-python3, desktop-file-utils (>= 0.13), libcups2-dev, libglib2.0-dev, libudev-dev (>= 172) [linux-any], libusb-1.0-0-dev, xmlto Package-List: python3-cupshelpers deb python optional arch=all system-config-printer deb gnome optional arch=all system-config-printer-common deb gnome optional arch=all system-config-printer-udev deb gnome optional arch=linux-any Checksums-Sha1: ac248b688ab103da7f034bd0d913e4e299206f4b 1396808 system-config-printer_1.5.18.orig.tar.xz 0f7c755f8e4efeeb8d248408963e77b833bf3a2a 13488 system-config-printer_1.5.18-3.debian.tar.xz Checksums-Sha256: b1a69e1b4ec2add569a87aeca811a37c5361ee6ae327ec852b79e64223e34bee 1396808 system-config-printer_1.5.18.orig.tar.xz 89523293c4c01551cbb6902f1f85bab78578c25fcb008c0c87a123f28ca906ef 13488 system-config-printer_1.5.18-3.debian.tar.xz Files: ee92ed28a0f89a88ff0478c62c59c599 1396808 system-config-printer_1.5.18.orig.tar.xz dc13b740e6ec6fa53147211967f00b99 13488 system-config-printer_1.5.18-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEECbOsLssWnJBDRcxUauHfDWCPItwFAmZh4vEACgkQauHfDWCP ItyKBxAAgIjsfNIrwdkbhZIlq2MyF0HkEpgqwaml8xA/uLR6KfLz87RuMN+M7KCk PWDn2XhtTZM5INzeC6HnjsgZ7253tSgfiyS9uPrSCW4AralwIpij9Lv9MVrW8AqW vJ/D21n94E04Ok0LUoA7ZIIeVMZBIaFkoLhLZMo+upa+In0EQSw6ODR/M8S3wxys cxHi/f00PyfwvC3vcyTAeHsBCmvwoNEw2ej8f8aGkYsvgyIIIMAoS2z6x7ED1bT5 8jinsuIdl1fTZzcMH5ck7JlStHmZGBDhqlFd26sFwdxtgPSXooYAo5D1fVI1rfJ+ F03S6iYNlRU+XfnHKGTskIvv1aUf++T45IPoy7sKwwz7OT/SvIA5lrkrkELzotoe oNdCQ4Kn3GYWTIqJU+C/Pj2NuysgWRx6z2stU3CrwOkMqk0cC8O9+HBzUiqp+Cwe BPlVCVp6vQa5AF4OJkDdmL0RL+M1UAyE23zGsrePQkr5mXarPP5lgCS1PCIWaWRK H3dRp9sLgt0MiG+HvXyFeYk/ohD+hYZIsF2XjNkh/3jntldTOLn0NfpZQaUmj23c qvPla2qTFiD58J8a8IfXyG8M+R5unMAXu9P+Hwfo+rBFpBwwL6Kw81m8V293gg0y tmLEylvGLAXrrsVP6XgmEUEEeBAnj/YkPD37tp7ksBAZKvJ8v+8= =wmBK -----END PGP SIGNATURE----- Mon Nov 25 15:42:12 UTC 2024 I: Checking whether the package is not for us Mon Nov 25 15:42:12 UTC 2024 I: Starting 1st build on remote node codethink04-arm64.debian.net. Mon Nov 25 15:42:12 UTC 2024 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Mon Nov 25 15:42:12 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Mon Nov 25 15:42:12 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-mBD3dY' ==================================================================================== Mon Nov 25 15:42:14 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 system-config-printer trixie /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww 1.5.18-3" as arguments. Mon Nov 25 15:42:14 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-ozyN4SPJ" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Nov 25 15:42:14 UTC 2024 I: Downloading source for trixie/system-config-printer=1.5.18-3 Reading package lists... NOTICE: 'system-config-printer' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/gnome-team/system-config-printer.git Please use: git clone https://salsa.debian.org/gnome-team/system-config-printer.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 1413 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (dsc) [2660 B] Get:2 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (tar) [1397 kB] Get:3 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (diff) [13.5 kB] Fetched 1413 kB in 0s (32.3 MB/s) Download complete and in download only mode Reading package lists... NOTICE: 'system-config-printer' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/gnome-team/system-config-printer.git Please use: git clone https://salsa.debian.org/gnome-team/system-config-printer.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 1413 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (dsc) [2660 B] Get:2 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (tar) [1397 kB] Get:3 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (diff) [13.5 kB] Fetched 1413 kB in 0s (32.3 MB/s) Download complete and in download only mode ============================================================================= Building system-config-printer in trixie on arm64 on codethink04-arm64 now. Date: Mon Nov 25 15:42:14 GMT 2024 Date UTC: Mon Nov 25 15:42:14 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Nov 25 03:42:14 -12 2024 I: pbuilder-time-stamp: 1732549334 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [system-config-printer_1.5.18-3.dsc] I: copying [./system-config-printer_1.5.18.orig.tar.xz] I: copying [./system-config-printer_1.5.18-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jun 6 16:25:21 2024 gpgv: using RSA key 09B3AC2ECB169C904345CC546AE1DF0D608F22DC gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./system-config-printer_1.5.18-3.dsc: no acceptable signature found dpkg-source: info: extracting system-config-printer in system-config-printer-1.5.18 dpkg-source: info: unpacking system-config-printer_1.5.18.orig.tar.xz dpkg-source: info: unpacking system-config-printer_1.5.18-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0006-use-paper-size-default-in-etc-papersize.patch dpkg-source: info: applying 0007-fix-pk-package-name.patch dpkg-source: info: applying Allow-installing-packages-from-OpenPrinting.patch dpkg-source: info: applying Do-not-autostart-the-applet-on-LXDE-or-Unity.patch dpkg-source: info: applying Show-Printer-Settings-in-Unity-Control-Center.patch dpkg-source: info: applying makefile-am-fix-setup-py-install.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2095298/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b6dad2bad7504784ac21431c2fce2f29' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2095298' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_QiiT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1 --logfile b1/build.log system-config-printer_1.5.18-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-28-cloud-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2095298/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), debhelper (>= 13.11.6), autoconf-archive, dh-sequence-gnome, dh-sequence-python3, desktop-file-utils (>= 0.13), libcups2-dev, libglib2.0-dev, libudev-dev (>= 172), libusb-1.0-0-dev, xmlto dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 13.11.6); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autoconf-archive; however: Package autoconf-archive is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-gnome; however: Package dh-sequence-gnome is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however: Package dh-sequence-python3 is not installed. pbuilder-satisfydepends-dummy depends on desktop-file-utils (>= 0.13); however: Package desktop-file-utils is not installed. pbuilder-satisfydepends-dummy depends on libcups2-dev; however: Package libcups2-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libudev-dev (>= 172); however: Package libudev-dev is not installed. pbuilder-satisfydepends-dummy depends on libusb-1.0-0-dev; however: Package libusb-1.0-0-dev is not installed. pbuilder-satisfydepends-dummy depends on xmlto; however: Package xmlto is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} autoconf-archive{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} desktop-file-utils{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} girepository-tools{a} gnome-pkg-tools{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libavahi-client3{a} libavahi-common-data{a} libavahi-common3{a} libblkid-dev{a} libcom-err2{a} libcups2-dev{a} libcups2t64{a} libcupsimage2-dev{a} libcupsimage2t64{a} libdbus-1-3{a} libdebhelper-perl{a} libdeflate-dev{a} libdeflate0{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgio-2.0-dev{a} libgio-2.0-dev-bin{a} libgirepository-2.0-0{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libgssapi-krb5-2{a} libicu72{a} libjbig-dev{a} libjbig0{a} libjpeg-dev{a} libjpeg62-turbo{a} libjpeg62-turbo-dev{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} liblerc-dev{a} liblerc4{a} liblzma-dev{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libnsl2{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libpng-dev{a} libpng16-16t64{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libselinux1-dev{a} libsepol-dev{a} libsharpyuv-dev{a} libsharpyuv0{a} libsysprof-capture-4-dev{a} libtiff-dev{a} libtiff6{a} libtiffxx6{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libudev-dev{a} libusb-1.0-0{a} libusb-1.0-0-dev{a} libwebp-dev{a} libwebp7{a} libwebpdecoder3{a} libwebpdemux2{a} libwebpmux3{a} libxml2{a} libxml2-utils{a} libxslt1.1{a} libzstd-dev{a} m4{a} man-db{a} media-types{a} native-architecture{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-autocommand{a} python3-inflect{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-minimal{a} python3-more-itertools{a} python3-packaging{a} python3-pkg-resources{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} tzdata{a} uuid-dev{a} xml-core{a} xmlto{a} xsltproc{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl dblatex dbus fop git-buildpackage krb5-locales libarchive-cpio-perl libcupsfilters-dev libcupsfilters1t64 libltdl-dev libmail-sendmail-perl libpaper-utils libpng-tools libusb-1.0-doc lynx shared-mime-info wget xdg-user-dirs zip 0 packages upgraded, 134 newly installed, 0 to remove and 0 not upgraded. Need to get 44.1 MB of archives. After unpacking 198 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 autoconf-archive all 20220903-3 [775 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libpython3.12-minimal arm64 3.12.7-3 [808 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libexpat1 arm64 2.6.4-1 [90.7 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 python3.12-minimal arm64 3.12.7-3 [1940 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 python3-minimal arm64 3.12.6-1 [26.7 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 media-types all 10.1.0 [26.9 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 netbase all 6.4 [12.8 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 tzdata all 2024b-3 [255 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libkrb5support0 arm64 1.21.3-3 [32.1 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libcom-err2 arm64 1.47.1-1+b1 [23.1 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 libk5crypto3 arm64 1.21.3-3 [80.8 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 libkeyutils1 arm64 1.6.3-4 [9352 B] Get: 13 http://deb.debian.org/debian trixie/main arm64 libkrb5-3 arm64 1.21.3-3 [310 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 libgssapi-krb5-2 arm64 1.21.3-3 [126 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libtirpc3t64 arm64 1.3.4+ds-1.3+b1 [78.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libnsl2 arm64 1.3.0-3+b3 [37.9 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 readline-common all 8.2-5 [69.3 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libreadline8t64 arm64 8.2-5 [159 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libpython3.12-stdlib arm64 3.12.7-3 [1902 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 python3.12 arm64 3.12.7-3 [671 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 libpython3-stdlib arm64 3.12.6-1 [9692 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 python3 arm64 3.12.6-1 [27.8 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 sgml-base all 1.31 [15.4 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 42 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 43 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 44 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 45 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 46 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 47 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 48 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 49 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 50 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 51 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 52 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 53 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 54 http://deb.debian.org/debian trixie/main arm64 libglib2.0-0t64 arm64 2.82.2-2 [1409 kB] Get: 55 http://deb.debian.org/debian trixie/main arm64 desktop-file-utils arm64 0.27-2+b1 [89.2 kB] Get: 56 http://deb.debian.org/debian trixie/main arm64 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 57 http://deb.debian.org/debian trixie/main arm64 python3-more-itertools all 10.5.0-1 [63.8 kB] Get: 58 http://deb.debian.org/debian trixie/main arm64 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 59 http://deb.debian.org/debian trixie/main arm64 python3-typeguard all 4.4.1-1 [37.0 kB] Get: 60 http://deb.debian.org/debian trixie/main arm64 python3-inflect all 7.3.1-2 [32.4 kB] Get: 61 http://deb.debian.org/debian trixie/main arm64 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 62 http://deb.debian.org/debian trixie/main arm64 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 63 http://deb.debian.org/debian trixie/main arm64 python3-pkg-resources all 74.1.2-2 [213 kB] Get: 64 http://deb.debian.org/debian trixie/main arm64 python3-zipp all 3.21.0-1 [10.6 kB] Get: 65 http://deb.debian.org/debian trixie/main arm64 python3-setuptools all 74.1.2-2 [736 kB] Get: 66 http://deb.debian.org/debian trixie/main arm64 dh-python all 6.20241024 [109 kB] Get: 67 http://deb.debian.org/debian trixie/main arm64 xml-core all 0.19 [20.1 kB] Get: 68 http://deb.debian.org/debian trixie/main arm64 sgml-data all 2.0.11+nmu1 [179 kB] Get: 69 http://deb.debian.org/debian trixie/main arm64 docbook-xml all 4.5-13 [77.4 kB] Get: 70 http://deb.debian.org/debian trixie/main arm64 docbook-xsl all 1.79.2+dfsg-7 [1221 kB] Get: 71 http://deb.debian.org/debian trixie/main arm64 native-architecture all 0.2.3 [2108 B] Get: 72 http://deb.debian.org/debian trixie/main arm64 libgirepository-2.0-0 arm64 2.82.2-2 [129 kB] Get: 73 http://deb.debian.org/debian trixie/main arm64 girepository-tools arm64 2.82.2-2 [134 kB] Get: 74 http://deb.debian.org/debian trixie/main arm64 gnome-pkg-tools all 0.22.9 [17.2 kB] Get: 75 http://deb.debian.org/debian trixie/main arm64 libavahi-common-data arm64 0.8-13+b3 [112 kB] Get: 76 http://deb.debian.org/debian trixie/main arm64 libavahi-common3 arm64 0.8-13+b3 [42.3 kB] Get: 77 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.14.10-6 [196 kB] Get: 78 http://deb.debian.org/debian trixie/main arm64 libavahi-client3 arm64 0.8-13+b3 [46.0 kB] Get: 79 http://deb.debian.org/debian trixie/main arm64 uuid-dev arm64 2.40.2-11 [47.8 kB] Get: 80 http://deb.debian.org/debian trixie/main arm64 libblkid-dev arm64 2.40.2-11 [208 kB] Get: 81 http://deb.debian.org/debian trixie/main arm64 libcups2t64 arm64 2.4.10-2 [235 kB] Get: 82 http://deb.debian.org/debian trixie/main arm64 libcupsimage2t64 arm64 2.4.10-2 [18.3 kB] Get: 83 http://deb.debian.org/debian trixie/main arm64 libjpeg62-turbo arm64 1:2.1.5-3+b1 [173 kB] Get: 84 http://deb.debian.org/debian trixie/main arm64 libjpeg62-turbo-dev arm64 1:2.1.5-3+b1 [293 kB] Get: 85 http://deb.debian.org/debian trixie/main arm64 libjpeg-dev arm64 1:2.1.5-3+b1 [72.2 kB] Get: 86 http://deb.debian.org/debian trixie/main arm64 libpng16-16t64 arm64 1.6.44-2 [273 kB] Get: 87 http://deb.debian.org/debian trixie/main arm64 zlib1g-dev arm64 1:1.3.dfsg+really1.3.1-1+b1 [917 kB] Get: 88 http://deb.debian.org/debian trixie/main arm64 libpng-dev arm64 1.6.44-2 [360 kB] Get: 89 http://deb.debian.org/debian trixie/main arm64 libjbig0 arm64 2.1-6.1+b2 [30.4 kB] Get: 90 http://deb.debian.org/debian trixie/main arm64 libjbig-dev arm64 2.1-6.1+b2 [30.5 kB] Get: 91 http://deb.debian.org/debian trixie/main arm64 liblzma-dev arm64 5.6.3-1+b1 [312 kB] Get: 92 http://deb.debian.org/debian trixie/main arm64 libzstd-dev arm64 1.5.6+dfsg-1+b1 [329 kB] Get: 93 http://deb.debian.org/debian trixie/main arm64 libsharpyuv0 arm64 1.4.0-0.1+b1 [112 kB] Get: 94 http://deb.debian.org/debian trixie/main arm64 libwebp7 arm64 1.4.0-0.1+b1 [268 kB] Get: 95 http://deb.debian.org/debian trixie/main arm64 libwebpdemux2 arm64 1.4.0-0.1+b1 [110 kB] Get: 96 http://deb.debian.org/debian trixie/main arm64 libwebpmux3 arm64 1.4.0-0.1+b1 [122 kB] Get: 97 http://deb.debian.org/debian trixie/main arm64 libwebpdecoder3 arm64 1.4.0-0.1+b1 [179 kB] Get: 98 http://deb.debian.org/debian trixie/main arm64 libsharpyuv-dev arm64 1.4.0-0.1+b1 [115 kB] Get: 99 http://deb.debian.org/debian trixie/main arm64 libwebp-dev arm64 1.4.0-0.1+b1 [400 kB] Get: 100 http://deb.debian.org/debian trixie/main arm64 libdeflate0 arm64 1.22-1 [42.2 kB] Get: 101 http://deb.debian.org/debian trixie/main arm64 liblerc4 arm64 4.0.0+ds-5 [146 kB] Get: 102 http://deb.debian.org/debian trixie/main arm64 libtiff6 arm64 4.5.1+git230720-5 [309 kB] Get: 103 http://deb.debian.org/debian trixie/main arm64 libtiffxx6 arm64 4.5.1+git230720-5 [149 kB] Get: 104 http://deb.debian.org/debian trixie/main arm64 libdeflate-dev arm64 1.22-1 [51.2 kB] Get: 105 http://deb.debian.org/debian trixie/main arm64 liblerc-dev arm64 4.0.0+ds-5 [164 kB] Get: 106 http://deb.debian.org/debian trixie/main arm64 libtiff-dev arm64 4.5.1+git230720-5 [451 kB] Get: 107 http://deb.debian.org/debian trixie/main arm64 libcupsimage2-dev arm64 2.4.10-2 [6552 B] Get: 108 http://deb.debian.org/debian trixie/main arm64 libcups2-dev arm64 2.4.10-2 [295 kB] Get: 109 http://deb.debian.org/debian trixie/main arm64 libffi-dev arm64 3.4.6-1 [57.0 kB] Get: 110 http://deb.debian.org/debian trixie/main arm64 libsepol-dev arm64 3.7-1 [354 kB] Get: 111 http://deb.debian.org/debian trixie/main arm64 libpcre2-16-0 arm64 10.42-4+b2 [220 kB] Get: 112 http://deb.debian.org/debian trixie/main arm64 libpcre2-32-0 arm64 10.42-4+b2 [211 kB] Get: 113 http://deb.debian.org/debian trixie/main arm64 libpcre2-posix3 arm64 10.42-4+b2 [55.9 kB] Get: 114 http://deb.debian.org/debian trixie/main arm64 libpcre2-dev arm64 10.42-4+b2 [683 kB] Get: 115 http://deb.debian.org/debian trixie/main arm64 libselinux1-dev arm64 3.7-3+b1 [164 kB] Get: 116 http://deb.debian.org/debian trixie/main arm64 libmount-dev arm64 2.40.2-11 [28.9 kB] Get: 117 http://deb.debian.org/debian trixie/main arm64 libsysprof-capture-4-dev arm64 47.0-2 [48.9 kB] Get: 118 http://deb.debian.org/debian trixie/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 119 http://deb.debian.org/debian trixie/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 120 http://deb.debian.org/debian trixie/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 121 http://deb.debian.org/debian trixie/main arm64 libgio-2.0-dev arm64 2.82.2-2 [1690 kB] Get: 122 http://deb.debian.org/debian trixie/main arm64 python3-packaging all 24.2-1 [55.3 kB] Get: 123 http://deb.debian.org/debian trixie/main arm64 libgio-2.0-dev-bin arm64 2.82.2-2 [161 kB] Get: 124 http://deb.debian.org/debian trixie/main arm64 libglib2.0-data all 2.82.2-2 [1274 kB] Get: 125 http://deb.debian.org/debian trixie/main arm64 libglib2.0-bin arm64 2.82.2-2 [122 kB] Get: 126 http://deb.debian.org/debian trixie/main arm64 libglib2.0-dev-bin arm64 2.82.2-2 [51.1 kB] Get: 127 http://deb.debian.org/debian trixie/main arm64 libglib2.0-dev arm64 2.82.2-2 [51.8 kB] Get: 128 http://deb.debian.org/debian trixie/main arm64 libudev-dev arm64 257~rc2-3 [69.9 kB] Get: 129 http://deb.debian.org/debian trixie/main arm64 libusb-1.0-0 arm64 2:1.0.27-1+b1 [55.4 kB] Get: 130 http://deb.debian.org/debian trixie/main arm64 libusb-1.0-0-dev arm64 2:1.0.27-1+b1 [79.7 kB] Get: 131 http://deb.debian.org/debian trixie/main arm64 libxml2-utils arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [97.7 kB] Get: 132 http://deb.debian.org/debian trixie/main arm64 libxslt1.1 arm64 1.1.35-1.1+b1 [222 kB] Get: 133 http://deb.debian.org/debian trixie/main arm64 xsltproc arm64 1.1.35-1.1+b1 [115 kB] Get: 134 http://deb.debian.org/debian trixie/main arm64 xmlto arm64 0.0.28-3.1 [26.9 kB] Fetched 44.1 MB in 0s (138 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package autoconf-archive. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../autoconf-archive_20220903-3_all.deb ... Unpacking autoconf-archive (20220903-3) ... Selecting previously unselected package libpython3.12-minimal:arm64. Preparing to unpack .../libpython3.12-minimal_3.12.7-3_arm64.deb ... Unpacking libpython3.12-minimal:arm64 (3.12.7-3) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../libexpat1_2.6.4-1_arm64.deb ... Unpacking libexpat1:arm64 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_arm64.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:arm64 (3.12.7-3) ... Setting up libexpat1:arm64 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21589 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_arm64.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:arm64. Preparing to unpack .../04-libkrb5support0_1.21.3-3_arm64.deb ... Unpacking libkrb5support0:arm64 (1.21.3-3) ... Selecting previously unselected package libcom-err2:arm64. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_arm64.deb ... Unpacking libcom-err2:arm64 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:arm64. Preparing to unpack .../06-libk5crypto3_1.21.3-3_arm64.deb ... Unpacking libk5crypto3:arm64 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:arm64. Preparing to unpack .../07-libkeyutils1_1.6.3-4_arm64.deb ... Unpacking libkeyutils1:arm64 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:arm64. Preparing to unpack .../08-libkrb5-3_1.21.3-3_arm64.deb ... Unpacking libkrb5-3:arm64 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:arm64. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_arm64.deb ... Unpacking libgssapi-krb5-2:arm64 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:arm64. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3 to /lib/aarch64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3.0.0 to /lib/aarch64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:arm64. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_arm64.deb ... Unpacking libnsl2:arm64 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:arm64. Preparing to unpack .../14-libreadline8t64_8.2-5_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8 to /lib/aarch64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8.2 to /lib/aarch64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8 to /lib/aarch64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8.2 to /lib/aarch64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:arm64 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:arm64. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_arm64.deb ... Unpacking libpython3.12-stdlib:arm64 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_arm64.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 22651 files and directories currently installed.) Preparing to unpack .../000-python3_3.12.6-1_arm64.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../001-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../002-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../003-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../004-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../005-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../006-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../007-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../008-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../009-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../010-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../011-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../012-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../013-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../014-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../015-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../016-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../017-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../018-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../019-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../020-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../021-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../022-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../023-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../024-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../025-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../026-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../027-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../028-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../029-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../030-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libglib2.0-0t64:arm64. Preparing to unpack .../031-libglib2.0-0t64_2.82.2-2_arm64.deb ... Unpacking libglib2.0-0t64:arm64 (2.82.2-2) ... Selecting previously unselected package desktop-file-utils. Preparing to unpack .../032-desktop-file-utils_0.27-2+b1_arm64.deb ... Unpacking desktop-file-utils (0.27-2+b1) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../033-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../034-python3-more-itertools_10.5.0-1_all.deb ... Unpacking python3-more-itertools (10.5.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../035-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../036-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../037-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../038-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../039-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../040-python3-pkg-resources_74.1.2-2_all.deb ... Unpacking python3-pkg-resources (74.1.2-2) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../041-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../042-python3-setuptools_74.1.2-2_all.deb ... Unpacking python3-setuptools (74.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../043-dh-python_6.20241024_all.deb ... Unpacking dh-python (6.20241024) ... Selecting previously unselected package xml-core. Preparing to unpack .../044-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package sgml-data. Preparing to unpack .../045-sgml-data_2.0.11+nmu1_all.deb ... Unpacking sgml-data (2.0.11+nmu1) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../046-docbook-xml_4.5-13_all.deb ... Unpacking docbook-xml (4.5-13) ... Selecting previously unselected package docbook-xsl. Preparing to unpack .../047-docbook-xsl_1.79.2+dfsg-7_all.deb ... Unpacking docbook-xsl (1.79.2+dfsg-7) ... Selecting previously unselected package native-architecture. Preparing to unpack .../048-native-architecture_0.2.3_all.deb ... Unpacking native-architecture (0.2.3) ... Selecting previously unselected package libgirepository-2.0-0:arm64. Preparing to unpack .../049-libgirepository-2.0-0_2.82.2-2_arm64.deb ... Unpacking libgirepository-2.0-0:arm64 (2.82.2-2) ... Selecting previously unselected package girepository-tools:arm64. Preparing to unpack .../050-girepository-tools_2.82.2-2_arm64.deb ... Unpacking girepository-tools:arm64 (2.82.2-2) ... Selecting previously unselected package gnome-pkg-tools. Preparing to unpack .../051-gnome-pkg-tools_0.22.9_all.deb ... Unpacking gnome-pkg-tools (0.22.9) ... Selecting previously unselected package libavahi-common-data:arm64. Preparing to unpack .../052-libavahi-common-data_0.8-13+b3_arm64.deb ... Unpacking libavahi-common-data:arm64 (0.8-13+b3) ... Selecting previously unselected package libavahi-common3:arm64. Preparing to unpack .../053-libavahi-common3_0.8-13+b3_arm64.deb ... Unpacking libavahi-common3:arm64 (0.8-13+b3) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../054-libdbus-1-3_1.14.10-6_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.14.10-6) ... Selecting previously unselected package libavahi-client3:arm64. Preparing to unpack .../055-libavahi-client3_0.8-13+b3_arm64.deb ... Unpacking libavahi-client3:arm64 (0.8-13+b3) ... Selecting previously unselected package uuid-dev:arm64. Preparing to unpack .../056-uuid-dev_2.40.2-11_arm64.deb ... Unpacking uuid-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libblkid-dev:arm64. Preparing to unpack .../057-libblkid-dev_2.40.2-11_arm64.deb ... Unpacking libblkid-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libcups2t64:arm64. Preparing to unpack .../058-libcups2t64_2.4.10-2_arm64.deb ... Unpacking libcups2t64:arm64 (2.4.10-2) ... Selecting previously unselected package libcupsimage2t64:arm64. Preparing to unpack .../059-libcupsimage2t64_2.4.10-2_arm64.deb ... Unpacking libcupsimage2t64:arm64 (2.4.10-2) ... Selecting previously unselected package libjpeg62-turbo:arm64. Preparing to unpack .../060-libjpeg62-turbo_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg62-turbo:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libjpeg62-turbo-dev:arm64. Preparing to unpack .../061-libjpeg62-turbo-dev_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg62-turbo-dev:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libjpeg-dev:arm64. Preparing to unpack .../062-libjpeg-dev_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg-dev:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libpng16-16t64:arm64. Preparing to unpack .../063-libpng16-16t64_1.6.44-2_arm64.deb ... Unpacking libpng16-16t64:arm64 (1.6.44-2) ... Selecting previously unselected package zlib1g-dev:arm64. Preparing to unpack .../064-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_arm64.deb ... Unpacking zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ... Selecting previously unselected package libpng-dev:arm64. Preparing to unpack .../065-libpng-dev_1.6.44-2_arm64.deb ... Unpacking libpng-dev:arm64 (1.6.44-2) ... Selecting previously unselected package libjbig0:arm64. Preparing to unpack .../066-libjbig0_2.1-6.1+b2_arm64.deb ... Unpacking libjbig0:arm64 (2.1-6.1+b2) ... Selecting previously unselected package libjbig-dev:arm64. Preparing to unpack .../067-libjbig-dev_2.1-6.1+b2_arm64.deb ... Unpacking libjbig-dev:arm64 (2.1-6.1+b2) ... Selecting previously unselected package liblzma-dev:arm64. Preparing to unpack .../068-liblzma-dev_5.6.3-1+b1_arm64.deb ... Unpacking liblzma-dev:arm64 (5.6.3-1+b1) ... Selecting previously unselected package libzstd-dev:arm64. Preparing to unpack .../069-libzstd-dev_1.5.6+dfsg-1+b1_arm64.deb ... Unpacking libzstd-dev:arm64 (1.5.6+dfsg-1+b1) ... Selecting previously unselected package libsharpyuv0:arm64. Preparing to unpack .../070-libsharpyuv0_1.4.0-0.1+b1_arm64.deb ... Unpacking libsharpyuv0:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebp7:arm64. Preparing to unpack .../071-libwebp7_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebp7:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpdemux2:arm64. Preparing to unpack .../072-libwebpdemux2_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpdemux2:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpmux3:arm64. Preparing to unpack .../073-libwebpmux3_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpmux3:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpdecoder3:arm64. Preparing to unpack .../074-libwebpdecoder3_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpdecoder3:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libsharpyuv-dev:arm64. Preparing to unpack .../075-libsharpyuv-dev_1.4.0-0.1+b1_arm64.deb ... Unpacking libsharpyuv-dev:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebp-dev:arm64. Preparing to unpack .../076-libwebp-dev_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebp-dev:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libdeflate0:arm64. Preparing to unpack .../077-libdeflate0_1.22-1_arm64.deb ... Unpacking libdeflate0:arm64 (1.22-1) ... Selecting previously unselected package liblerc4:arm64. Preparing to unpack .../078-liblerc4_4.0.0+ds-5_arm64.deb ... Unpacking liblerc4:arm64 (4.0.0+ds-5) ... Selecting previously unselected package libtiff6:arm64. Preparing to unpack .../079-libtiff6_4.5.1+git230720-5_arm64.deb ... Unpacking libtiff6:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libtiffxx6:arm64. Preparing to unpack .../080-libtiffxx6_4.5.1+git230720-5_arm64.deb ... Unpacking libtiffxx6:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libdeflate-dev:arm64. Preparing to unpack .../081-libdeflate-dev_1.22-1_arm64.deb ... Unpacking libdeflate-dev:arm64 (1.22-1) ... Selecting previously unselected package liblerc-dev:arm64. Preparing to unpack .../082-liblerc-dev_4.0.0+ds-5_arm64.deb ... Unpacking liblerc-dev:arm64 (4.0.0+ds-5) ... Selecting previously unselected package libtiff-dev:arm64. Preparing to unpack .../083-libtiff-dev_4.5.1+git230720-5_arm64.deb ... Unpacking libtiff-dev:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libcupsimage2-dev:arm64. Preparing to unpack .../084-libcupsimage2-dev_2.4.10-2_arm64.deb ... Unpacking libcupsimage2-dev:arm64 (2.4.10-2) ... Selecting previously unselected package libcups2-dev:arm64. Preparing to unpack .../085-libcups2-dev_2.4.10-2_arm64.deb ... Unpacking libcups2-dev:arm64 (2.4.10-2) ... Selecting previously unselected package libffi-dev:arm64. Preparing to unpack .../086-libffi-dev_3.4.6-1_arm64.deb ... Unpacking libffi-dev:arm64 (3.4.6-1) ... Selecting previously unselected package libsepol-dev:arm64. Preparing to unpack .../087-libsepol-dev_3.7-1_arm64.deb ... Unpacking libsepol-dev:arm64 (3.7-1) ... Selecting previously unselected package libpcre2-16-0:arm64. Preparing to unpack .../088-libpcre2-16-0_10.42-4+b2_arm64.deb ... Unpacking libpcre2-16-0:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-32-0:arm64. Preparing to unpack .../089-libpcre2-32-0_10.42-4+b2_arm64.deb ... Unpacking libpcre2-32-0:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-posix3:arm64. Preparing to unpack .../090-libpcre2-posix3_10.42-4+b2_arm64.deb ... Unpacking libpcre2-posix3:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-dev:arm64. Preparing to unpack .../091-libpcre2-dev_10.42-4+b2_arm64.deb ... Unpacking libpcre2-dev:arm64 (10.42-4+b2) ... Selecting previously unselected package libselinux1-dev:arm64. Preparing to unpack .../092-libselinux1-dev_3.7-3+b1_arm64.deb ... Unpacking libselinux1-dev:arm64 (3.7-3+b1) ... Selecting previously unselected package libmount-dev:arm64. Preparing to unpack .../093-libmount-dev_2.40.2-11_arm64.deb ... Unpacking libmount-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libsysprof-capture-4-dev:arm64. Preparing to unpack .../094-libsysprof-capture-4-dev_47.0-2_arm64.deb ... Unpacking libsysprof-capture-4-dev:arm64 (47.0-2) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../095-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../096-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../097-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package libgio-2.0-dev:arm64. Preparing to unpack .../098-libgio-2.0-dev_2.82.2-2_arm64.deb ... Unpacking libgio-2.0-dev:arm64 (2.82.2-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../099-python3-packaging_24.2-1_all.deb ... Unpacking python3-packaging (24.2-1) ... Selecting previously unselected package libgio-2.0-dev-bin. Preparing to unpack .../100-libgio-2.0-dev-bin_2.82.2-2_arm64.deb ... Unpacking libgio-2.0-dev-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../101-libglib2.0-data_2.82.2-2_all.deb ... Unpacking libglib2.0-data (2.82.2-2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../102-libglib2.0-bin_2.82.2-2_arm64.deb ... Unpacking libglib2.0-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../103-libglib2.0-dev-bin_2.82.2-2_arm64.deb ... Unpacking libglib2.0-dev-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-dev:arm64. Preparing to unpack .../104-libglib2.0-dev_2.82.2-2_arm64.deb ... Unpacking libglib2.0-dev:arm64 (2.82.2-2) ... Selecting previously unselected package libudev-dev:arm64. Preparing to unpack .../105-libudev-dev_257~rc2-3_arm64.deb ... Unpacking libudev-dev:arm64 (257~rc2-3) ... Selecting previously unselected package libusb-1.0-0:arm64. Preparing to unpack .../106-libusb-1.0-0_2%3a1.0.27-1+b1_arm64.deb ... Unpacking libusb-1.0-0:arm64 (2:1.0.27-1+b1) ... Selecting previously unselected package libusb-1.0-0-dev:arm64. Preparing to unpack .../107-libusb-1.0-0-dev_2%3a1.0.27-1+b1_arm64.deb ... Unpacking libusb-1.0-0-dev:arm64 (2:1.0.27-1+b1) ... Selecting previously unselected package libxml2-utils. Preparing to unpack .../108-libxml2-utils_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package libxslt1.1:arm64. Preparing to unpack .../109-libxslt1.1_1.1.35-1.1+b1_arm64.deb ... Unpacking libxslt1.1:arm64 (1.1.35-1.1+b1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../110-xsltproc_1.1.35-1.1+b1_arm64.deb ... Unpacking xsltproc (1.1.35-1.1+b1) ... Selecting previously unselected package xmlto. Preparing to unpack .../111-xmlto_0.0.28-3.1_arm64.deb ... Unpacking xmlto (0.0.28-3.1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libsharpyuv0:arm64 (1.4.0-0.1+b1) ... Setting up libkeyutils1:arm64 (1.6.3-4) ... Setting up native-architecture (0.2.3) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up liblerc4:arm64 (4.0.0+ds-5) ... Setting up libzstd-dev:arm64 (1.5.6+dfsg-1+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libdeflate0:arm64 (1.22-1) ... Setting up libwebpdecoder3:arm64 (1.4.0-0.1+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up autoconf-archive (20220903-3) ... Setting up libcom-err2:arm64 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libffi-dev:arm64 (3.4.6-1) ... Setting up libjbig0:arm64 (2.1-6.1+b2) ... Setting up libpcre2-16-0:arm64 (10.42-4+b2) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up libkrb5support0:arm64 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Nov 25 15:42:36 UTC 2024. Universal Time is now: Mon Nov 25 15:42:36 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:arm64 (47.0-2) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:arm64 (10.42-4+b2) ... Setting up libglib2.0-0t64:arm64 (2.82.2-2) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.82.2-2) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libjpeg62-turbo:arm64 (1:2.1.5-3+b1) ... Setting up libjpeg62-turbo-dev:arm64 (1:2.1.5-3+b1) ... Setting up uuid-dev:arm64 (2.40.2-11) ... Setting up libavahi-common-data:arm64 (0.8-13+b3) ... Setting up libdbus-1-3:arm64 (1.14.10-6) ... Setting up gnome-pkg-tools (0.22.9) ... Setting up libpng16-16t64:arm64 (1.6.44-2) ... Setting up autopoint (0.22.5-2) ... Setting up libudev-dev:arm64 (257~rc2-3) ... Setting up libsepol-dev:arm64 (3.7-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up liblerc-dev:arm64 (4.0.0+ds-5) ... Setting up libk5crypto3:arm64 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libwebp7:arm64 (1.4.0-0.1+b1) ... Setting up liblzma-dev:arm64 (5.6.3-1+b1) ... Setting up zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up libpcre2-posix3:arm64 (10.42-4+b2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libtiff6:arm64 (4.5.1+git230720-5) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up libkrb5-3:arm64 (1.21.3-3) ... Setting up libusb-1.0-0:arm64 (2:1.0.27-1+b1) ... Setting up libsharpyuv-dev:arm64 (1.4.0-0.1+b1) ... Setting up libwebpmux3:arm64 (1.4.0-0.1+b1) ... Setting up libtiffxx6:arm64 (4.5.1+git230720-5) ... Setting up libdeflate-dev:arm64 (1.22-1) ... Setting up readline-common (8.2-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libblkid-dev:arm64 (2.40.2-11) ... Setting up gettext (0.22.5-2) ... Setting up desktop-file-utils (0.27-2+b1) ... Setting up libpcre2-dev:arm64 (10.42-4+b2) ... Setting up libtool (2.4.7-8) ... Setting up libgirepository-2.0-0:arm64 (2.82.2-2) ... Setting up libselinux1-dev:arm64 (3.7-3+b1) ... Setting up libwebpdemux2:arm64 (1.4.0-0.1+b1) ... Setting up libpng-dev:arm64 (1.6.44-2) ... Setting up libavahi-common3:arm64 (0.8-13+b3) ... Setting up libjpeg-dev:arm64 (1:2.1.5-3+b1) ... Setting up libjbig-dev:arm64 (2.1-6.1+b2) ... Setting up libglib2.0-bin (2.82.2-2) ... Setting up libusb-1.0-0-dev:arm64 (2:1.0.27-1+b1) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libwebp-dev:arm64 (1.4.0-0.1+b1) ... Setting up libtiff-dev:arm64 (4.5.1+git230720-5) ... Setting up libgssapi-krb5-2:arm64 (1.21.3-3) ... Setting up libreadline8t64:arm64 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up xml-core (0.19) ... Setting up libxslt1.1:arm64 (1.1.35-1.1+b1) ... Setting up libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libavahi-client3:arm64 (0.8-13+b3) ... Setting up libmount-dev:arm64 (2.40.2-11) ... Setting up libgio-2.0-dev:arm64 (2.82.2-2) ... Setting up girepository-tools:arm64 (2.82.2-2) ... Setting up libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up xsltproc (1.1.35-1.1+b1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:arm64 (1.3.0-3+b3) ... Setting up libcups2t64:arm64 (2.4.10-2) ... Setting up libpython3.12-stdlib:arm64 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libcupsimage2t64:arm64 (2.4.10-2) ... Setting up libpython3-stdlib:arm64 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-packaging (24.2-1) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-more-itertools (10.5.0-1) ... Setting up libgio-2.0-dev-bin (2.82.2-2) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-pkg-resources (74.1.2-2) ... Setting up libglib2.0-dev-bin (2.82.2-2) ... Setting up python3-setuptools (74.1.2-2) ... Setting up libglib2.0-dev:arm64 (2.82.2-2) ... Setting up dh-python (6.20241024) ... Setting up libcups2-dev:arm64 (2.4.10-2) ... Setting up libcupsimage2-dev:arm64 (2.4.10-2) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xsl (1.79.2+dfsg-7) ... Setting up sgml-data (2.0.11+nmu1) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xml (4.5-13) ... Processing triggers for sgml-base (1.31) ... Setting up xmlto (0.0.28-3.1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/system-config-printer-1.5.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../system-config-printer_1.5.18-3_source.changes dpkg-buildpackage: info: source package system-config-printer dpkg-buildpackage: info: source version 1.5.18-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Michael Biebl dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --buildsystem=autoconf dh_auto_clean -O--buildsystem=autoconf dh_autoreconf_clean -O--buildsystem=autoconf dh_clean -O--buildsystem=autoconf debian/rules execute_after_dh_clean make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' rm -f dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' debian/rules binary dh binary --buildsystem=autoconf dh_update_autotools_config -O--buildsystem=autoconf debian/rules override_dh_autoreconf make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_autoreconf ./bootstrap Creating directory m4 Copying file m4/gettext.m4 Copying file m4/host-cpu-c-abi.m4 Copying file m4/iconv.m4 Copying file m4/intlmacosx.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/progtest.m4 Copying file po/Makevars.template configure.ac:20: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:20: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:20: the top level configure.ac:65: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:65: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:65: the top level configure.ac:101: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:101: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:101: the top level make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_configure -- --with-udev-rules \ --with-udevdir=/usr/lib/udev \ --with-systemdsystemunitdir=/usr/lib/systemd/system \ --with-cups-serverbin-dir=/usr/lib/cups ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-udev-rules --with-udevdir=/usr/lib/udev --with-systemdsystemunitdir=/usr/lib/systemd/system --with-cups-serverbin-dir=/usr/lib/cups checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for egrep -e... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.12 checking for python3 platform... linux checking for GNU default python3 prefix... ${prefix} checking for GNU default python3 exec_prefix... ${exec_prefix} checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.12/site-packages checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUPS SERVERBIN dir... /usr/lib/cups checking for glib-2.0... yes checking for libudev >= 172... yes checking for libusb-1.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_build -O--buildsystem=autoconf make -j12 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making all in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml /usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop Warning: program compiled against libxml 212 using older 209 /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.18|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir /usr/bin/mkdir -p cupshelpers gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py /usr/bin/python3 setup.py build udev/udev-configure-printer.c: In function 'device_id_from_devpath': udev/udev-configure-printer.c:856:10: warning: passing argument 1 of 'g_free' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 856 | g_free(device_id); | ^~~~~~~~~ In file included from /usr/include/glib-2.0/glib/glist.h:34, from /usr/include/glib-2.0/glib/ghash.h:36, from /usr/include/glib-2.0/glib.h:52, from udev/udev-configure-printer.c:52: /usr/include/glib-2.0/glib/gmem.h:74:46: note: expected 'gpointer' {aka 'void *'} but argument is of type 'const char *' 74 | void (g_free) (gpointer mem); | ~~~~~~~~~~~~~~~~~~^~~ udev/udev-configure-printer.c: In function 'find_matching_device_uris': udev/udev-configure-printer.c:1031:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1031 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:19, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'for_each_matching_queue': udev/udev-configure-printer.c:1362:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1362 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'enable_queue': udev/udev-configure-printer.c:1553:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1553 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'remove_queue': udev/udev-configure-printer.c:1745:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1745 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'disable_queue': udev/udev-configure-printer.c:1777:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1777 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 touch .stamp-man-pages-built gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,-z,defs -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making all in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_test -O--buildsystem=autoconf make -j12 check "TESTSUITEFLAGS=-j12 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making check in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make check-TESTS make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' make[4]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' echo "#!/bin/bash" > "test-xml-validity.sh" echo "#!/bin/bash" > "py.test.sh" echo "set -e" >> "test-xml-validity.sh" echo "exec " >> "py.test.sh" echo "xmllint --relaxng \\" >> "test-xml-validity.sh" chmod 755 "py.test.sh" echo " ./xml/preferreddrivers.rng \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml >/dev/null" >> "test-xml-validity.sh" echo "/usr/bin/python3 ./xml/validate.py \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml" >> "test-xml-validity.sh" chmod 755 "test-xml-validity.sh" PASS: py.test.sh PASS: test-xml-validity.sh ============================================================================ Testsuite summary for system-config-printer 1.5.18 ============================================================================ # TOTAL: 2 # PASS: 2 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making check in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=autoconf dh_prep -O--buildsystem=autoconf dh_auto_install -O--buildsystem=autoconf make -j12 install DESTDIR=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py install --root=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp --prefix=/usr --install-layout=deb /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/install -c -m 644 udev/configure-printer@.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' /usr/bin/install -c udev/udev-add-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/install -c udev/udev-configure-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/install -c troubleshoot/__init__.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 udev/70-printers.rules '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' /usr/bin/install -c -m 644 icons/i-network-printer.png '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition installing ar.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo if test "system-config-printer" = "gettext-tools"; then \ /usr/bin/mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_install -O--buildsystem=autoconf dh_installdocs -O--buildsystem=autoconf dh_installchangelogs -O--buildsystem=autoconf dh_installman -O--buildsystem=autoconf debian/rules override_dh_python3 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_python3 -ppython3-cupshelpers dh_python3 -psystem-config-printer /usr/share/system-config-printer/ dh_python3 -psystem-config-printer-common /usr/share/system-config-printer/ make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_installsystemd -O--buildsystem=autoconf dh_installsystemduser -O--buildsystem=autoconf dh_gnome -O--buildsystem=autoconf dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf Normalized debian/system-config-printer-common/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -a -O--buildsystem=autoconf dh_strip -a -O--buildsystem=autoconf dh_makeshlibs -a -O--buildsystem=autoconf dh_shlibdeps -a -O--buildsystem=autoconf dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb -O--buildsystem=autoconf debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_gencontrol -- \ -Vpysmbc:Recommends="python3-smbc" dpkg-gencontrol: warning: Suggests field of package system-config-printer-common: substitution variable ${pysmbc:Suggests} used, but is not defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf dpkg-deb: building package 'system-config-printer-common' in '../system-config-printer-common_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer' in '../system-config-printer_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev' in '../system-config-printer-udev_1.5.18-3_arm64.deb'. dpkg-deb: building package 'python3-cupshelpers' in '../python3-cupshelpers_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev-dbgsym' in '../system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb'. dpkg-genbuildinfo --build=binary -O../system-config-printer_1.5.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../system-config-printer_1.5.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2095298 and its subdirectories I: Current time: Mon Nov 25 03:43:03 -12 2024 I: pbuilder-time-stamp: 1732549383 Mon Nov 25 15:43:03 UTC 2024 I: Signing ./b1/system-config-printer_1.5.18-3_arm64.buildinfo as system-config-printer_1.5.18-3_arm64.buildinfo.asc Mon Nov 25 15:43:03 UTC 2024 I: Signed ./b1/system-config-printer_1.5.18-3_arm64.buildinfo as ./b1/system-config-printer_1.5.18-3_arm64.buildinfo.asc Mon Nov 25 15:43:03 UTC 2024 - build #1 for system-config-printer/trixie/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Mon Nov 25 15:43:03 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-ozyN4SPJ, removing. /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 25 15:43 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 25 15:42 b2 -rw------- 1 jenkins jenkins 3869 Nov 25 15:42 rbuildlog.oaSFaGJ -rw-r--r-- 1 jenkins jenkins 2660 Jun 6 16:39 system-config-printer_1.5.18-3.dsc /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1: total 1424 -rw-r--r-- 1 jenkins jenkins 102766 Nov 25 15:43 build.log -rw-r--r-- 1 jenkins jenkins 127748 Nov 25 15:43 python3-cupshelpers_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 801928 Nov 25 15:43 system-config-printer-common_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 40340 Nov 25 15:43 system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb -rw-r--r-- 1 jenkins jenkins 114956 Nov 25 15:43 system-config-printer-udev_1.5.18-3_arm64.deb -rw-r--r-- 1 jenkins jenkins 13488 Nov 25 15:43 system-config-printer_1.5.18-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2660 Nov 25 15:43 system-config-printer_1.5.18-3.dsc -rw-r--r-- 1 jenkins jenkins 183792 Nov 25 15:43 system-config-printer_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 9619 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 10501 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2938 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1483 Nov 25 15:43 system-config-printer_1.5.18-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2: total 0 Mon Nov 25 15:43:04 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Nov 25 03:42:14 -12 2024 I: pbuilder-time-stamp: 1732549334 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [system-config-printer_1.5.18-3.dsc] I: copying [./system-config-printer_1.5.18.orig.tar.xz] I: copying [./system-config-printer_1.5.18-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jun 6 16:25:21 2024 gpgv: using RSA key 09B3AC2ECB169C904345CC546AE1DF0D608F22DC gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./system-config-printer_1.5.18-3.dsc: no acceptable signature found dpkg-source: info: extracting system-config-printer in system-config-printer-1.5.18 dpkg-source: info: unpacking system-config-printer_1.5.18.orig.tar.xz dpkg-source: info: unpacking system-config-printer_1.5.18-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0006-use-paper-size-default-in-etc-papersize.patch dpkg-source: info: applying 0007-fix-pk-package-name.patch dpkg-source: info: applying Allow-installing-packages-from-OpenPrinting.patch dpkg-source: info: applying Do-not-autostart-the-applet-on-LXDE-or-Unity.patch dpkg-source: info: applying Show-Printer-Settings-in-Unity-Control-Center.patch dpkg-source: info: applying makefile-am-fix-setup-py-install.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2095298/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='b6dad2bad7504784ac21431c2fce2f29' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2095298' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_QiiT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1 --logfile b1/build.log system-config-printer_1.5.18-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-28-cloud-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2095298/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), debhelper (>= 13.11.6), autoconf-archive, dh-sequence-gnome, dh-sequence-python3, desktop-file-utils (>= 0.13), libcups2-dev, libglib2.0-dev, libudev-dev (>= 172), libusb-1.0-0-dev, xmlto dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 13.11.6); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autoconf-archive; however: Package autoconf-archive is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-gnome; however: Package dh-sequence-gnome is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however: Package dh-sequence-python3 is not installed. pbuilder-satisfydepends-dummy depends on desktop-file-utils (>= 0.13); however: Package desktop-file-utils is not installed. pbuilder-satisfydepends-dummy depends on libcups2-dev; however: Package libcups2-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libudev-dev (>= 172); however: Package libudev-dev is not installed. pbuilder-satisfydepends-dummy depends on libusb-1.0-0-dev; however: Package libusb-1.0-0-dev is not installed. pbuilder-satisfydepends-dummy depends on xmlto; however: Package xmlto is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} autoconf-archive{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} desktop-file-utils{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} girepository-tools{a} gnome-pkg-tools{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libavahi-client3{a} libavahi-common-data{a} libavahi-common3{a} libblkid-dev{a} libcom-err2{a} libcups2-dev{a} libcups2t64{a} libcupsimage2-dev{a} libcupsimage2t64{a} libdbus-1-3{a} libdebhelper-perl{a} libdeflate-dev{a} libdeflate0{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgio-2.0-dev{a} libgio-2.0-dev-bin{a} libgirepository-2.0-0{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libgssapi-krb5-2{a} libicu72{a} libjbig-dev{a} libjbig0{a} libjpeg-dev{a} libjpeg62-turbo{a} libjpeg62-turbo-dev{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} liblerc-dev{a} liblerc4{a} liblzma-dev{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libnsl2{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libpng-dev{a} libpng16-16t64{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libselinux1-dev{a} libsepol-dev{a} libsharpyuv-dev{a} libsharpyuv0{a} libsysprof-capture-4-dev{a} libtiff-dev{a} libtiff6{a} libtiffxx6{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libudev-dev{a} libusb-1.0-0{a} libusb-1.0-0-dev{a} libwebp-dev{a} libwebp7{a} libwebpdecoder3{a} libwebpdemux2{a} libwebpmux3{a} libxml2{a} libxml2-utils{a} libxslt1.1{a} libzstd-dev{a} m4{a} man-db{a} media-types{a} native-architecture{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-autocommand{a} python3-inflect{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-minimal{a} python3-more-itertools{a} python3-packaging{a} python3-pkg-resources{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} tzdata{a} uuid-dev{a} xml-core{a} xmlto{a} xsltproc{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl dblatex dbus fop git-buildpackage krb5-locales libarchive-cpio-perl libcupsfilters-dev libcupsfilters1t64 libltdl-dev libmail-sendmail-perl libpaper-utils libpng-tools libusb-1.0-doc lynx shared-mime-info wget xdg-user-dirs zip 0 packages upgraded, 134 newly installed, 0 to remove and 0 not upgraded. Need to get 44.1 MB of archives. After unpacking 198 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 autoconf-archive all 20220903-3 [775 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libpython3.12-minimal arm64 3.12.7-3 [808 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libexpat1 arm64 2.6.4-1 [90.7 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 python3.12-minimal arm64 3.12.7-3 [1940 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 python3-minimal arm64 3.12.6-1 [26.7 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 media-types all 10.1.0 [26.9 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 netbase all 6.4 [12.8 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 tzdata all 2024b-3 [255 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libkrb5support0 arm64 1.21.3-3 [32.1 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libcom-err2 arm64 1.47.1-1+b1 [23.1 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 libk5crypto3 arm64 1.21.3-3 [80.8 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 libkeyutils1 arm64 1.6.3-4 [9352 B] Get: 13 http://deb.debian.org/debian trixie/main arm64 libkrb5-3 arm64 1.21.3-3 [310 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 libgssapi-krb5-2 arm64 1.21.3-3 [126 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libtirpc3t64 arm64 1.3.4+ds-1.3+b1 [78.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libnsl2 arm64 1.3.0-3+b3 [37.9 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 readline-common all 8.2-5 [69.3 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libreadline8t64 arm64 8.2-5 [159 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libpython3.12-stdlib arm64 3.12.7-3 [1902 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 python3.12 arm64 3.12.7-3 [671 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 libpython3-stdlib arm64 3.12.6-1 [9692 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 python3 arm64 3.12.6-1 [27.8 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 sgml-base all 1.31 [15.4 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 42 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 43 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 44 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 45 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 46 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 47 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 48 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 49 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 50 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 51 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 52 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 53 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 54 http://deb.debian.org/debian trixie/main arm64 libglib2.0-0t64 arm64 2.82.2-2 [1409 kB] Get: 55 http://deb.debian.org/debian trixie/main arm64 desktop-file-utils arm64 0.27-2+b1 [89.2 kB] Get: 56 http://deb.debian.org/debian trixie/main arm64 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 57 http://deb.debian.org/debian trixie/main arm64 python3-more-itertools all 10.5.0-1 [63.8 kB] Get: 58 http://deb.debian.org/debian trixie/main arm64 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 59 http://deb.debian.org/debian trixie/main arm64 python3-typeguard all 4.4.1-1 [37.0 kB] Get: 60 http://deb.debian.org/debian trixie/main arm64 python3-inflect all 7.3.1-2 [32.4 kB] Get: 61 http://deb.debian.org/debian trixie/main arm64 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 62 http://deb.debian.org/debian trixie/main arm64 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 63 http://deb.debian.org/debian trixie/main arm64 python3-pkg-resources all 74.1.2-2 [213 kB] Get: 64 http://deb.debian.org/debian trixie/main arm64 python3-zipp all 3.21.0-1 [10.6 kB] Get: 65 http://deb.debian.org/debian trixie/main arm64 python3-setuptools all 74.1.2-2 [736 kB] Get: 66 http://deb.debian.org/debian trixie/main arm64 dh-python all 6.20241024 [109 kB] Get: 67 http://deb.debian.org/debian trixie/main arm64 xml-core all 0.19 [20.1 kB] Get: 68 http://deb.debian.org/debian trixie/main arm64 sgml-data all 2.0.11+nmu1 [179 kB] Get: 69 http://deb.debian.org/debian trixie/main arm64 docbook-xml all 4.5-13 [77.4 kB] Get: 70 http://deb.debian.org/debian trixie/main arm64 docbook-xsl all 1.79.2+dfsg-7 [1221 kB] Get: 71 http://deb.debian.org/debian trixie/main arm64 native-architecture all 0.2.3 [2108 B] Get: 72 http://deb.debian.org/debian trixie/main arm64 libgirepository-2.0-0 arm64 2.82.2-2 [129 kB] Get: 73 http://deb.debian.org/debian trixie/main arm64 girepository-tools arm64 2.82.2-2 [134 kB] Get: 74 http://deb.debian.org/debian trixie/main arm64 gnome-pkg-tools all 0.22.9 [17.2 kB] Get: 75 http://deb.debian.org/debian trixie/main arm64 libavahi-common-data arm64 0.8-13+b3 [112 kB] Get: 76 http://deb.debian.org/debian trixie/main arm64 libavahi-common3 arm64 0.8-13+b3 [42.3 kB] Get: 77 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.14.10-6 [196 kB] Get: 78 http://deb.debian.org/debian trixie/main arm64 libavahi-client3 arm64 0.8-13+b3 [46.0 kB] Get: 79 http://deb.debian.org/debian trixie/main arm64 uuid-dev arm64 2.40.2-11 [47.8 kB] Get: 80 http://deb.debian.org/debian trixie/main arm64 libblkid-dev arm64 2.40.2-11 [208 kB] Get: 81 http://deb.debian.org/debian trixie/main arm64 libcups2t64 arm64 2.4.10-2 [235 kB] Get: 82 http://deb.debian.org/debian trixie/main arm64 libcupsimage2t64 arm64 2.4.10-2 [18.3 kB] Get: 83 http://deb.debian.org/debian trixie/main arm64 libjpeg62-turbo arm64 1:2.1.5-3+b1 [173 kB] Get: 84 http://deb.debian.org/debian trixie/main arm64 libjpeg62-turbo-dev arm64 1:2.1.5-3+b1 [293 kB] Get: 85 http://deb.debian.org/debian trixie/main arm64 libjpeg-dev arm64 1:2.1.5-3+b1 [72.2 kB] Get: 86 http://deb.debian.org/debian trixie/main arm64 libpng16-16t64 arm64 1.6.44-2 [273 kB] Get: 87 http://deb.debian.org/debian trixie/main arm64 zlib1g-dev arm64 1:1.3.dfsg+really1.3.1-1+b1 [917 kB] Get: 88 http://deb.debian.org/debian trixie/main arm64 libpng-dev arm64 1.6.44-2 [360 kB] Get: 89 http://deb.debian.org/debian trixie/main arm64 libjbig0 arm64 2.1-6.1+b2 [30.4 kB] Get: 90 http://deb.debian.org/debian trixie/main arm64 libjbig-dev arm64 2.1-6.1+b2 [30.5 kB] Get: 91 http://deb.debian.org/debian trixie/main arm64 liblzma-dev arm64 5.6.3-1+b1 [312 kB] Get: 92 http://deb.debian.org/debian trixie/main arm64 libzstd-dev arm64 1.5.6+dfsg-1+b1 [329 kB] Get: 93 http://deb.debian.org/debian trixie/main arm64 libsharpyuv0 arm64 1.4.0-0.1+b1 [112 kB] Get: 94 http://deb.debian.org/debian trixie/main arm64 libwebp7 arm64 1.4.0-0.1+b1 [268 kB] Get: 95 http://deb.debian.org/debian trixie/main arm64 libwebpdemux2 arm64 1.4.0-0.1+b1 [110 kB] Get: 96 http://deb.debian.org/debian trixie/main arm64 libwebpmux3 arm64 1.4.0-0.1+b1 [122 kB] Get: 97 http://deb.debian.org/debian trixie/main arm64 libwebpdecoder3 arm64 1.4.0-0.1+b1 [179 kB] Get: 98 http://deb.debian.org/debian trixie/main arm64 libsharpyuv-dev arm64 1.4.0-0.1+b1 [115 kB] Get: 99 http://deb.debian.org/debian trixie/main arm64 libwebp-dev arm64 1.4.0-0.1+b1 [400 kB] Get: 100 http://deb.debian.org/debian trixie/main arm64 libdeflate0 arm64 1.22-1 [42.2 kB] Get: 101 http://deb.debian.org/debian trixie/main arm64 liblerc4 arm64 4.0.0+ds-5 [146 kB] Get: 102 http://deb.debian.org/debian trixie/main arm64 libtiff6 arm64 4.5.1+git230720-5 [309 kB] Get: 103 http://deb.debian.org/debian trixie/main arm64 libtiffxx6 arm64 4.5.1+git230720-5 [149 kB] Get: 104 http://deb.debian.org/debian trixie/main arm64 libdeflate-dev arm64 1.22-1 [51.2 kB] Get: 105 http://deb.debian.org/debian trixie/main arm64 liblerc-dev arm64 4.0.0+ds-5 [164 kB] Get: 106 http://deb.debian.org/debian trixie/main arm64 libtiff-dev arm64 4.5.1+git230720-5 [451 kB] Get: 107 http://deb.debian.org/debian trixie/main arm64 libcupsimage2-dev arm64 2.4.10-2 [6552 B] Get: 108 http://deb.debian.org/debian trixie/main arm64 libcups2-dev arm64 2.4.10-2 [295 kB] Get: 109 http://deb.debian.org/debian trixie/main arm64 libffi-dev arm64 3.4.6-1 [57.0 kB] Get: 110 http://deb.debian.org/debian trixie/main arm64 libsepol-dev arm64 3.7-1 [354 kB] Get: 111 http://deb.debian.org/debian trixie/main arm64 libpcre2-16-0 arm64 10.42-4+b2 [220 kB] Get: 112 http://deb.debian.org/debian trixie/main arm64 libpcre2-32-0 arm64 10.42-4+b2 [211 kB] Get: 113 http://deb.debian.org/debian trixie/main arm64 libpcre2-posix3 arm64 10.42-4+b2 [55.9 kB] Get: 114 http://deb.debian.org/debian trixie/main arm64 libpcre2-dev arm64 10.42-4+b2 [683 kB] Get: 115 http://deb.debian.org/debian trixie/main arm64 libselinux1-dev arm64 3.7-3+b1 [164 kB] Get: 116 http://deb.debian.org/debian trixie/main arm64 libmount-dev arm64 2.40.2-11 [28.9 kB] Get: 117 http://deb.debian.org/debian trixie/main arm64 libsysprof-capture-4-dev arm64 47.0-2 [48.9 kB] Get: 118 http://deb.debian.org/debian trixie/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 119 http://deb.debian.org/debian trixie/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 120 http://deb.debian.org/debian trixie/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 121 http://deb.debian.org/debian trixie/main arm64 libgio-2.0-dev arm64 2.82.2-2 [1690 kB] Get: 122 http://deb.debian.org/debian trixie/main arm64 python3-packaging all 24.2-1 [55.3 kB] Get: 123 http://deb.debian.org/debian trixie/main arm64 libgio-2.0-dev-bin arm64 2.82.2-2 [161 kB] Get: 124 http://deb.debian.org/debian trixie/main arm64 libglib2.0-data all 2.82.2-2 [1274 kB] Get: 125 http://deb.debian.org/debian trixie/main arm64 libglib2.0-bin arm64 2.82.2-2 [122 kB] Get: 126 http://deb.debian.org/debian trixie/main arm64 libglib2.0-dev-bin arm64 2.82.2-2 [51.1 kB] Get: 127 http://deb.debian.org/debian trixie/main arm64 libglib2.0-dev arm64 2.82.2-2 [51.8 kB] Get: 128 http://deb.debian.org/debian trixie/main arm64 libudev-dev arm64 257~rc2-3 [69.9 kB] Get: 129 http://deb.debian.org/debian trixie/main arm64 libusb-1.0-0 arm64 2:1.0.27-1+b1 [55.4 kB] Get: 130 http://deb.debian.org/debian trixie/main arm64 libusb-1.0-0-dev arm64 2:1.0.27-1+b1 [79.7 kB] Get: 131 http://deb.debian.org/debian trixie/main arm64 libxml2-utils arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [97.7 kB] Get: 132 http://deb.debian.org/debian trixie/main arm64 libxslt1.1 arm64 1.1.35-1.1+b1 [222 kB] Get: 133 http://deb.debian.org/debian trixie/main arm64 xsltproc arm64 1.1.35-1.1+b1 [115 kB] Get: 134 http://deb.debian.org/debian trixie/main arm64 xmlto arm64 0.0.28-3.1 [26.9 kB] Fetched 44.1 MB in 0s (138 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package autoconf-archive. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../autoconf-archive_20220903-3_all.deb ... Unpacking autoconf-archive (20220903-3) ... Selecting previously unselected package libpython3.12-minimal:arm64. Preparing to unpack .../libpython3.12-minimal_3.12.7-3_arm64.deb ... Unpacking libpython3.12-minimal:arm64 (3.12.7-3) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../libexpat1_2.6.4-1_arm64.deb ... Unpacking libexpat1:arm64 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_arm64.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:arm64 (3.12.7-3) ... Setting up libexpat1:arm64 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21589 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_arm64.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:arm64. Preparing to unpack .../04-libkrb5support0_1.21.3-3_arm64.deb ... Unpacking libkrb5support0:arm64 (1.21.3-3) ... Selecting previously unselected package libcom-err2:arm64. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_arm64.deb ... Unpacking libcom-err2:arm64 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:arm64. Preparing to unpack .../06-libk5crypto3_1.21.3-3_arm64.deb ... Unpacking libk5crypto3:arm64 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:arm64. Preparing to unpack .../07-libkeyutils1_1.6.3-4_arm64.deb ... Unpacking libkeyutils1:arm64 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:arm64. Preparing to unpack .../08-libkrb5-3_1.21.3-3_arm64.deb ... Unpacking libkrb5-3:arm64 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:arm64. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_arm64.deb ... Unpacking libgssapi-krb5-2:arm64 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:arm64. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3 to /lib/aarch64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3.0.0 to /lib/aarch64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:arm64. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_arm64.deb ... Unpacking libnsl2:arm64 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:arm64. Preparing to unpack .../14-libreadline8t64_8.2-5_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8 to /lib/aarch64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8.2 to /lib/aarch64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8 to /lib/aarch64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8.2 to /lib/aarch64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:arm64 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:arm64. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_arm64.deb ... Unpacking libpython3.12-stdlib:arm64 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_arm64.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 22651 files and directories currently installed.) Preparing to unpack .../000-python3_3.12.6-1_arm64.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../001-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../002-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../003-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../004-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../005-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../006-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../007-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../008-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../009-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../010-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../011-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../012-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../013-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../014-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../015-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../016-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../017-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../018-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../019-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../020-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../021-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../022-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../023-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../024-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../025-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../026-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../027-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../028-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../029-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../030-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libglib2.0-0t64:arm64. Preparing to unpack .../031-libglib2.0-0t64_2.82.2-2_arm64.deb ... Unpacking libglib2.0-0t64:arm64 (2.82.2-2) ... Selecting previously unselected package desktop-file-utils. Preparing to unpack .../032-desktop-file-utils_0.27-2+b1_arm64.deb ... Unpacking desktop-file-utils (0.27-2+b1) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../033-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../034-python3-more-itertools_10.5.0-1_all.deb ... Unpacking python3-more-itertools (10.5.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../035-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../036-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../037-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../038-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../039-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../040-python3-pkg-resources_74.1.2-2_all.deb ... Unpacking python3-pkg-resources (74.1.2-2) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../041-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../042-python3-setuptools_74.1.2-2_all.deb ... Unpacking python3-setuptools (74.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../043-dh-python_6.20241024_all.deb ... Unpacking dh-python (6.20241024) ... Selecting previously unselected package xml-core. Preparing to unpack .../044-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package sgml-data. Preparing to unpack .../045-sgml-data_2.0.11+nmu1_all.deb ... Unpacking sgml-data (2.0.11+nmu1) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../046-docbook-xml_4.5-13_all.deb ... Unpacking docbook-xml (4.5-13) ... Selecting previously unselected package docbook-xsl. Preparing to unpack .../047-docbook-xsl_1.79.2+dfsg-7_all.deb ... Unpacking docbook-xsl (1.79.2+dfsg-7) ... Selecting previously unselected package native-architecture. Preparing to unpack .../048-native-architecture_0.2.3_all.deb ... Unpacking native-architecture (0.2.3) ... Selecting previously unselected package libgirepository-2.0-0:arm64. Preparing to unpack .../049-libgirepository-2.0-0_2.82.2-2_arm64.deb ... Unpacking libgirepository-2.0-0:arm64 (2.82.2-2) ... Selecting previously unselected package girepository-tools:arm64. Preparing to unpack .../050-girepository-tools_2.82.2-2_arm64.deb ... Unpacking girepository-tools:arm64 (2.82.2-2) ... Selecting previously unselected package gnome-pkg-tools. Preparing to unpack .../051-gnome-pkg-tools_0.22.9_all.deb ... Unpacking gnome-pkg-tools (0.22.9) ... Selecting previously unselected package libavahi-common-data:arm64. Preparing to unpack .../052-libavahi-common-data_0.8-13+b3_arm64.deb ... Unpacking libavahi-common-data:arm64 (0.8-13+b3) ... Selecting previously unselected package libavahi-common3:arm64. Preparing to unpack .../053-libavahi-common3_0.8-13+b3_arm64.deb ... Unpacking libavahi-common3:arm64 (0.8-13+b3) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../054-libdbus-1-3_1.14.10-6_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.14.10-6) ... Selecting previously unselected package libavahi-client3:arm64. Preparing to unpack .../055-libavahi-client3_0.8-13+b3_arm64.deb ... Unpacking libavahi-client3:arm64 (0.8-13+b3) ... Selecting previously unselected package uuid-dev:arm64. Preparing to unpack .../056-uuid-dev_2.40.2-11_arm64.deb ... Unpacking uuid-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libblkid-dev:arm64. Preparing to unpack .../057-libblkid-dev_2.40.2-11_arm64.deb ... Unpacking libblkid-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libcups2t64:arm64. Preparing to unpack .../058-libcups2t64_2.4.10-2_arm64.deb ... Unpacking libcups2t64:arm64 (2.4.10-2) ... Selecting previously unselected package libcupsimage2t64:arm64. Preparing to unpack .../059-libcupsimage2t64_2.4.10-2_arm64.deb ... Unpacking libcupsimage2t64:arm64 (2.4.10-2) ... Selecting previously unselected package libjpeg62-turbo:arm64. Preparing to unpack .../060-libjpeg62-turbo_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg62-turbo:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libjpeg62-turbo-dev:arm64. Preparing to unpack .../061-libjpeg62-turbo-dev_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg62-turbo-dev:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libjpeg-dev:arm64. Preparing to unpack .../062-libjpeg-dev_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg-dev:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libpng16-16t64:arm64. Preparing to unpack .../063-libpng16-16t64_1.6.44-2_arm64.deb ... Unpacking libpng16-16t64:arm64 (1.6.44-2) ... Selecting previously unselected package zlib1g-dev:arm64. Preparing to unpack .../064-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_arm64.deb ... Unpacking zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ... Selecting previously unselected package libpng-dev:arm64. Preparing to unpack .../065-libpng-dev_1.6.44-2_arm64.deb ... Unpacking libpng-dev:arm64 (1.6.44-2) ... Selecting previously unselected package libjbig0:arm64. Preparing to unpack .../066-libjbig0_2.1-6.1+b2_arm64.deb ... Unpacking libjbig0:arm64 (2.1-6.1+b2) ... Selecting previously unselected package libjbig-dev:arm64. Preparing to unpack .../067-libjbig-dev_2.1-6.1+b2_arm64.deb ... Unpacking libjbig-dev:arm64 (2.1-6.1+b2) ... Selecting previously unselected package liblzma-dev:arm64. Preparing to unpack .../068-liblzma-dev_5.6.3-1+b1_arm64.deb ... Unpacking liblzma-dev:arm64 (5.6.3-1+b1) ... Selecting previously unselected package libzstd-dev:arm64. Preparing to unpack .../069-libzstd-dev_1.5.6+dfsg-1+b1_arm64.deb ... Unpacking libzstd-dev:arm64 (1.5.6+dfsg-1+b1) ... Selecting previously unselected package libsharpyuv0:arm64. Preparing to unpack .../070-libsharpyuv0_1.4.0-0.1+b1_arm64.deb ... Unpacking libsharpyuv0:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebp7:arm64. Preparing to unpack .../071-libwebp7_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebp7:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpdemux2:arm64. Preparing to unpack .../072-libwebpdemux2_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpdemux2:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpmux3:arm64. Preparing to unpack .../073-libwebpmux3_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpmux3:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpdecoder3:arm64. Preparing to unpack .../074-libwebpdecoder3_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpdecoder3:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libsharpyuv-dev:arm64. Preparing to unpack .../075-libsharpyuv-dev_1.4.0-0.1+b1_arm64.deb ... Unpacking libsharpyuv-dev:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebp-dev:arm64. Preparing to unpack .../076-libwebp-dev_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebp-dev:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libdeflate0:arm64. Preparing to unpack .../077-libdeflate0_1.22-1_arm64.deb ... Unpacking libdeflate0:arm64 (1.22-1) ... Selecting previously unselected package liblerc4:arm64. Preparing to unpack .../078-liblerc4_4.0.0+ds-5_arm64.deb ... Unpacking liblerc4:arm64 (4.0.0+ds-5) ... Selecting previously unselected package libtiff6:arm64. Preparing to unpack .../079-libtiff6_4.5.1+git230720-5_arm64.deb ... Unpacking libtiff6:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libtiffxx6:arm64. Preparing to unpack .../080-libtiffxx6_4.5.1+git230720-5_arm64.deb ... Unpacking libtiffxx6:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libdeflate-dev:arm64. Preparing to unpack .../081-libdeflate-dev_1.22-1_arm64.deb ... Unpacking libdeflate-dev:arm64 (1.22-1) ... Selecting previously unselected package liblerc-dev:arm64. Preparing to unpack .../082-liblerc-dev_4.0.0+ds-5_arm64.deb ... Unpacking liblerc-dev:arm64 (4.0.0+ds-5) ... Selecting previously unselected package libtiff-dev:arm64. Preparing to unpack .../083-libtiff-dev_4.5.1+git230720-5_arm64.deb ... Unpacking libtiff-dev:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libcupsimage2-dev:arm64. Preparing to unpack .../084-libcupsimage2-dev_2.4.10-2_arm64.deb ... Unpacking libcupsimage2-dev:arm64 (2.4.10-2) ... Selecting previously unselected package libcups2-dev:arm64. Preparing to unpack .../085-libcups2-dev_2.4.10-2_arm64.deb ... Unpacking libcups2-dev:arm64 (2.4.10-2) ... Selecting previously unselected package libffi-dev:arm64. Preparing to unpack .../086-libffi-dev_3.4.6-1_arm64.deb ... Unpacking libffi-dev:arm64 (3.4.6-1) ... Selecting previously unselected package libsepol-dev:arm64. Preparing to unpack .../087-libsepol-dev_3.7-1_arm64.deb ... Unpacking libsepol-dev:arm64 (3.7-1) ... Selecting previously unselected package libpcre2-16-0:arm64. Preparing to unpack .../088-libpcre2-16-0_10.42-4+b2_arm64.deb ... Unpacking libpcre2-16-0:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-32-0:arm64. Preparing to unpack .../089-libpcre2-32-0_10.42-4+b2_arm64.deb ... Unpacking libpcre2-32-0:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-posix3:arm64. Preparing to unpack .../090-libpcre2-posix3_10.42-4+b2_arm64.deb ... Unpacking libpcre2-posix3:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-dev:arm64. Preparing to unpack .../091-libpcre2-dev_10.42-4+b2_arm64.deb ... Unpacking libpcre2-dev:arm64 (10.42-4+b2) ... Selecting previously unselected package libselinux1-dev:arm64. Preparing to unpack .../092-libselinux1-dev_3.7-3+b1_arm64.deb ... Unpacking libselinux1-dev:arm64 (3.7-3+b1) ... Selecting previously unselected package libmount-dev:arm64. Preparing to unpack .../093-libmount-dev_2.40.2-11_arm64.deb ... Unpacking libmount-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libsysprof-capture-4-dev:arm64. Preparing to unpack .../094-libsysprof-capture-4-dev_47.0-2_arm64.deb ... Unpacking libsysprof-capture-4-dev:arm64 (47.0-2) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../095-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../096-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../097-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package libgio-2.0-dev:arm64. Preparing to unpack .../098-libgio-2.0-dev_2.82.2-2_arm64.deb ... Unpacking libgio-2.0-dev:arm64 (2.82.2-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../099-python3-packaging_24.2-1_all.deb ... Unpacking python3-packaging (24.2-1) ... Selecting previously unselected package libgio-2.0-dev-bin. Preparing to unpack .../100-libgio-2.0-dev-bin_2.82.2-2_arm64.deb ... Unpacking libgio-2.0-dev-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../101-libglib2.0-data_2.82.2-2_all.deb ... Unpacking libglib2.0-data (2.82.2-2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../102-libglib2.0-bin_2.82.2-2_arm64.deb ... Unpacking libglib2.0-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../103-libglib2.0-dev-bin_2.82.2-2_arm64.deb ... Unpacking libglib2.0-dev-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-dev:arm64. Preparing to unpack .../104-libglib2.0-dev_2.82.2-2_arm64.deb ... Unpacking libglib2.0-dev:arm64 (2.82.2-2) ... Selecting previously unselected package libudev-dev:arm64. Preparing to unpack .../105-libudev-dev_257~rc2-3_arm64.deb ... Unpacking libudev-dev:arm64 (257~rc2-3) ... Selecting previously unselected package libusb-1.0-0:arm64. Preparing to unpack .../106-libusb-1.0-0_2%3a1.0.27-1+b1_arm64.deb ... Unpacking libusb-1.0-0:arm64 (2:1.0.27-1+b1) ... Selecting previously unselected package libusb-1.0-0-dev:arm64. Preparing to unpack .../107-libusb-1.0-0-dev_2%3a1.0.27-1+b1_arm64.deb ... Unpacking libusb-1.0-0-dev:arm64 (2:1.0.27-1+b1) ... Selecting previously unselected package libxml2-utils. Preparing to unpack .../108-libxml2-utils_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package libxslt1.1:arm64. Preparing to unpack .../109-libxslt1.1_1.1.35-1.1+b1_arm64.deb ... Unpacking libxslt1.1:arm64 (1.1.35-1.1+b1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../110-xsltproc_1.1.35-1.1+b1_arm64.deb ... Unpacking xsltproc (1.1.35-1.1+b1) ... Selecting previously unselected package xmlto. Preparing to unpack .../111-xmlto_0.0.28-3.1_arm64.deb ... Unpacking xmlto (0.0.28-3.1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libsharpyuv0:arm64 (1.4.0-0.1+b1) ... Setting up libkeyutils1:arm64 (1.6.3-4) ... Setting up native-architecture (0.2.3) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up liblerc4:arm64 (4.0.0+ds-5) ... Setting up libzstd-dev:arm64 (1.5.6+dfsg-1+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libdeflate0:arm64 (1.22-1) ... Setting up libwebpdecoder3:arm64 (1.4.0-0.1+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up autoconf-archive (20220903-3) ... Setting up libcom-err2:arm64 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libffi-dev:arm64 (3.4.6-1) ... Setting up libjbig0:arm64 (2.1-6.1+b2) ... Setting up libpcre2-16-0:arm64 (10.42-4+b2) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up libkrb5support0:arm64 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Nov 25 15:42:36 UTC 2024. Universal Time is now: Mon Nov 25 15:42:36 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:arm64 (47.0-2) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:arm64 (10.42-4+b2) ... Setting up libglib2.0-0t64:arm64 (2.82.2-2) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.82.2-2) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libjpeg62-turbo:arm64 (1:2.1.5-3+b1) ... Setting up libjpeg62-turbo-dev:arm64 (1:2.1.5-3+b1) ... Setting up uuid-dev:arm64 (2.40.2-11) ... Setting up libavahi-common-data:arm64 (0.8-13+b3) ... Setting up libdbus-1-3:arm64 (1.14.10-6) ... Setting up gnome-pkg-tools (0.22.9) ... Setting up libpng16-16t64:arm64 (1.6.44-2) ... Setting up autopoint (0.22.5-2) ... Setting up libudev-dev:arm64 (257~rc2-3) ... Setting up libsepol-dev:arm64 (3.7-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up liblerc-dev:arm64 (4.0.0+ds-5) ... Setting up libk5crypto3:arm64 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libwebp7:arm64 (1.4.0-0.1+b1) ... Setting up liblzma-dev:arm64 (5.6.3-1+b1) ... Setting up zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up libpcre2-posix3:arm64 (10.42-4+b2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libtiff6:arm64 (4.5.1+git230720-5) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up libkrb5-3:arm64 (1.21.3-3) ... Setting up libusb-1.0-0:arm64 (2:1.0.27-1+b1) ... Setting up libsharpyuv-dev:arm64 (1.4.0-0.1+b1) ... Setting up libwebpmux3:arm64 (1.4.0-0.1+b1) ... Setting up libtiffxx6:arm64 (4.5.1+git230720-5) ... Setting up libdeflate-dev:arm64 (1.22-1) ... Setting up readline-common (8.2-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libblkid-dev:arm64 (2.40.2-11) ... Setting up gettext (0.22.5-2) ... Setting up desktop-file-utils (0.27-2+b1) ... Setting up libpcre2-dev:arm64 (10.42-4+b2) ... Setting up libtool (2.4.7-8) ... Setting up libgirepository-2.0-0:arm64 (2.82.2-2) ... Setting up libselinux1-dev:arm64 (3.7-3+b1) ... Setting up libwebpdemux2:arm64 (1.4.0-0.1+b1) ... Setting up libpng-dev:arm64 (1.6.44-2) ... Setting up libavahi-common3:arm64 (0.8-13+b3) ... Setting up libjpeg-dev:arm64 (1:2.1.5-3+b1) ... Setting up libjbig-dev:arm64 (2.1-6.1+b2) ... Setting up libglib2.0-bin (2.82.2-2) ... Setting up libusb-1.0-0-dev:arm64 (2:1.0.27-1+b1) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libwebp-dev:arm64 (1.4.0-0.1+b1) ... Setting up libtiff-dev:arm64 (4.5.1+git230720-5) ... Setting up libgssapi-krb5-2:arm64 (1.21.3-3) ... Setting up libreadline8t64:arm64 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up xml-core (0.19) ... Setting up libxslt1.1:arm64 (1.1.35-1.1+b1) ... Setting up libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libavahi-client3:arm64 (0.8-13+b3) ... Setting up libmount-dev:arm64 (2.40.2-11) ... Setting up libgio-2.0-dev:arm64 (2.82.2-2) ... Setting up girepository-tools:arm64 (2.82.2-2) ... Setting up libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up xsltproc (1.1.35-1.1+b1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:arm64 (1.3.0-3+b3) ... Setting up libcups2t64:arm64 (2.4.10-2) ... Setting up libpython3.12-stdlib:arm64 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libcupsimage2t64:arm64 (2.4.10-2) ... Setting up libpython3-stdlib:arm64 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-packaging (24.2-1) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-more-itertools (10.5.0-1) ... Setting up libgio-2.0-dev-bin (2.82.2-2) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-pkg-resources (74.1.2-2) ... Setting up libglib2.0-dev-bin (2.82.2-2) ... Setting up python3-setuptools (74.1.2-2) ... Setting up libglib2.0-dev:arm64 (2.82.2-2) ... Setting up dh-python (6.20241024) ... Setting up libcups2-dev:arm64 (2.4.10-2) ... Setting up libcupsimage2-dev:arm64 (2.4.10-2) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xsl (1.79.2+dfsg-7) ... Setting up sgml-data (2.0.11+nmu1) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xml (4.5-13) ... Processing triggers for sgml-base (1.31) ... Setting up xmlto (0.0.28-3.1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/system-config-printer-1.5.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../system-config-printer_1.5.18-3_source.changes dpkg-buildpackage: info: source package system-config-printer dpkg-buildpackage: info: source version 1.5.18-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Michael Biebl dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --buildsystem=autoconf dh_auto_clean -O--buildsystem=autoconf dh_autoreconf_clean -O--buildsystem=autoconf dh_clean -O--buildsystem=autoconf debian/rules execute_after_dh_clean make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' rm -f dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' debian/rules binary dh binary --buildsystem=autoconf dh_update_autotools_config -O--buildsystem=autoconf debian/rules override_dh_autoreconf make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_autoreconf ./bootstrap Creating directory m4 Copying file m4/gettext.m4 Copying file m4/host-cpu-c-abi.m4 Copying file m4/iconv.m4 Copying file m4/intlmacosx.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/progtest.m4 Copying file po/Makevars.template configure.ac:20: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:20: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:20: the top level configure.ac:65: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:65: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:65: the top level configure.ac:101: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:101: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:101: the top level make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_configure -- --with-udev-rules \ --with-udevdir=/usr/lib/udev \ --with-systemdsystemunitdir=/usr/lib/systemd/system \ --with-cups-serverbin-dir=/usr/lib/cups ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-udev-rules --with-udevdir=/usr/lib/udev --with-systemdsystemunitdir=/usr/lib/systemd/system --with-cups-serverbin-dir=/usr/lib/cups checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for egrep -e... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.12 checking for python3 platform... linux checking for GNU default python3 prefix... ${prefix} checking for GNU default python3 exec_prefix... ${exec_prefix} checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.12/site-packages checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUPS SERVERBIN dir... /usr/lib/cups checking for glib-2.0... yes checking for libudev >= 172... yes checking for libusb-1.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_build -O--buildsystem=autoconf make -j12 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making all in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml /usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop Warning: program compiled against libxml 212 using older 209 /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.18|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir /usr/bin/mkdir -p cupshelpers gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py /usr/bin/python3 setup.py build udev/udev-configure-printer.c: In function 'device_id_from_devpath': udev/udev-configure-printer.c:856:10: warning: passing argument 1 of 'g_free' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 856 | g_free(device_id); | ^~~~~~~~~ In file included from /usr/include/glib-2.0/glib/glist.h:34, from /usr/include/glib-2.0/glib/ghash.h:36, from /usr/include/glib-2.0/glib.h:52, from udev/udev-configure-printer.c:52: /usr/include/glib-2.0/glib/gmem.h:74:46: note: expected 'gpointer' {aka 'void *'} but argument is of type 'const char *' 74 | void (g_free) (gpointer mem); | ~~~~~~~~~~~~~~~~~~^~~ udev/udev-configure-printer.c: In function 'find_matching_device_uris': udev/udev-configure-printer.c:1031:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1031 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:19, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'for_each_matching_queue': udev/udev-configure-printer.c:1362:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1362 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'enable_queue': udev/udev-configure-printer.c:1553:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1553 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'remove_queue': udev/udev-configure-printer.c:1745:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1745 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'disable_queue': udev/udev-configure-printer.c:1777:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1777 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 touch .stamp-man-pages-built gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,-z,defs -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making all in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_test -O--buildsystem=autoconf make -j12 check "TESTSUITEFLAGS=-j12 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making check in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make check-TESTS make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' make[4]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' echo "#!/bin/bash" > "test-xml-validity.sh" echo "#!/bin/bash" > "py.test.sh" echo "set -e" >> "test-xml-validity.sh" echo "exec " >> "py.test.sh" echo "xmllint --relaxng \\" >> "test-xml-validity.sh" chmod 755 "py.test.sh" echo " ./xml/preferreddrivers.rng \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml >/dev/null" >> "test-xml-validity.sh" echo "/usr/bin/python3 ./xml/validate.py \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml" >> "test-xml-validity.sh" chmod 755 "test-xml-validity.sh" PASS: py.test.sh PASS: test-xml-validity.sh ============================================================================ Testsuite summary for system-config-printer 1.5.18 ============================================================================ # TOTAL: 2 # PASS: 2 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making check in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=autoconf dh_prep -O--buildsystem=autoconf dh_auto_install -O--buildsystem=autoconf make -j12 install DESTDIR=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py install --root=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp --prefix=/usr --install-layout=deb /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/install -c -m 644 udev/configure-printer@.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' /usr/bin/install -c udev/udev-add-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/install -c udev/udev-configure-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/install -c troubleshoot/__init__.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 udev/70-printers.rules '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' /usr/bin/install -c -m 644 icons/i-network-printer.png '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition installing ar.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo if test "system-config-printer" = "gettext-tools"; then \ /usr/bin/mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_install -O--buildsystem=autoconf dh_installdocs -O--buildsystem=autoconf dh_installchangelogs -O--buildsystem=autoconf dh_installman -O--buildsystem=autoconf debian/rules override_dh_python3 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_python3 -ppython3-cupshelpers dh_python3 -psystem-config-printer /usr/share/system-config-printer/ dh_python3 -psystem-config-printer-common /usr/share/system-config-printer/ make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_installsystemd -O--buildsystem=autoconf dh_installsystemduser -O--buildsystem=autoconf dh_gnome -O--buildsystem=autoconf dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf Normalized debian/system-config-printer-common/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -a -O--buildsystem=autoconf dh_strip -a -O--buildsystem=autoconf dh_makeshlibs -a -O--buildsystem=autoconf dh_shlibdeps -a -O--buildsystem=autoconf dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb -O--buildsystem=autoconf debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_gencontrol -- \ -Vpysmbc:Recommends="python3-smbc" dpkg-gencontrol: warning: Suggests field of package system-config-printer-common: substitution variable ${pysmbc:Suggests} used, but is not defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf dpkg-deb: building package 'system-config-printer-common' in '../system-config-printer-common_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer' in '../system-config-printer_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev' in '../system-config-printer-udev_1.5.18-3_arm64.deb'. dpkg-deb: building package 'python3-cupshelpers' in '../python3-cupshelpers_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev-dbgsym' in '../system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb'. dpkg-genbuildinfo --build=binary -O../system-config-printer_1.5.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../system-config-printer_1.5.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2095298 and its subdirectories I: Current time: Mon Nov 25 03:43:03 -12 2024 I: pbuilder-time-stamp: 1732549383 Mon Nov 25 15:43:05 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink01-arm64.debian.net. Mon Nov 25 15:43:05 UTC 2024 I: Preparing to do remote build '2' on codethink01-arm64.debian.net. Mon Nov 25 15:43:05 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Mon Nov 25 15:43:05 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-gpVYHV' ==================================================================================== Sun Dec 28 22:06:06 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink01-arm64, called using "2 system-config-printer trixie /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww 1.5.18-3" as arguments. Sun Dec 28 22:06:06 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-HEmNRG8y" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sun Dec 28 22:06:06 UTC 2025 I: Downloading source for trixie/system-config-printer=1.5.18-3 Reading package lists... NOTICE: 'system-config-printer' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/gnome-team/system-config-printer.git Please use: git clone https://salsa.debian.org/gnome-team/system-config-printer.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 1413 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (dsc) [2660 B] Get:2 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (tar) [1397 kB] Get:3 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (diff) [13.5 kB] Fetched 1413 kB in 0s (67.3 MB/s) Download complete and in download only mode Reading package lists... NOTICE: 'system-config-printer' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/gnome-team/system-config-printer.git Please use: git clone https://salsa.debian.org/gnome-team/system-config-printer.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 1413 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (dsc) [2660 B] Get:2 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (tar) [1397 kB] Get:3 http://deb.debian.org/debian trixie/main system-config-printer 1.5.18-3 (diff) [13.5 kB] Fetched 1413 kB in 0s (67.3 MB/s) Download complete and in download only mode ============================================================================= Re-Building system-config-printer in trixie on arm64 on codethink01-arm64 now. Date: Sun Dec 28 22:06:07 GMT 2025 Date UTC: Sun Dec 28 22:06:07 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_1n49 + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' system-config-printer = debian-installer -o system-config-printer = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' system-config-printer = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_1n49 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2 --logfile b2/build.log system-config-printer_1.5.18-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Dec 29 12:06:07 +14 2025 I: pbuilder-time-stamp: 1766959567 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [system-config-printer_1.5.18-3.dsc] I: copying [./system-config-printer_1.5.18.orig.tar.xz] I: copying [./system-config-printer_1.5.18-3.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jun 6 16:25:21 2024 gpgv: using RSA key 09B3AC2ECB169C904345CC546AE1DF0D608F22DC gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./system-config-printer_1.5.18-3.dsc: no acceptable signature found dpkg-source: info: extracting system-config-printer in system-config-printer-1.5.18 dpkg-source: info: unpacking system-config-printer_1.5.18.orig.tar.xz dpkg-source: info: unpacking system-config-printer_1.5.18-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0006-use-paper-size-default-in-etc-papersize.patch dpkg-source: info: applying 0007-fix-pk-package-name.patch dpkg-source: info: applying Allow-installing-packages-from-OpenPrinting.patch dpkg-source: info: applying Do-not-autostart-the-applet-on-LXDE-or-Unity.patch dpkg-source: info: applying Show-Printer-Settings-in-Unity-Control-Center.patch dpkg-source: info: applying makefile-am-fix-setup-py-install.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D01_modify_environment starting debug: Running on codethink01-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 28 22:06 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=01ee939181534abcbaae716f901eb454 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=3494775 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_1n49 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2 --logfile b2/build.log system-config-printer_1.5.18-3.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-28-cloud-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), debhelper (>= 13.11.6), autoconf-archive, dh-sequence-gnome, dh-sequence-python3, desktop-file-utils (>= 0.13), libcups2-dev, libglib2.0-dev, libudev-dev (>= 172), libusb-1.0-0-dev, xmlto dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 13.11.6); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autoconf-archive; however: Package autoconf-archive is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-gnome; however: Package dh-sequence-gnome is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however: Package dh-sequence-python3 is not installed. pbuilder-satisfydepends-dummy depends on desktop-file-utils (>= 0.13); however: Package desktop-file-utils is not installed. pbuilder-satisfydepends-dummy depends on libcups2-dev; however: Package libcups2-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libudev-dev (>= 172); however: Package libudev-dev is not installed. pbuilder-satisfydepends-dummy depends on libusb-1.0-0-dev; however: Package libusb-1.0-0-dev is not installed. pbuilder-satisfydepends-dummy depends on xmlto; however: Package xmlto is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} autoconf-archive{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} desktop-file-utils{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} girepository-tools{a} gnome-pkg-tools{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libavahi-client3{a} libavahi-common-data{a} libavahi-common3{a} libblkid-dev{a} libcom-err2{a} libcups2-dev{a} libcups2t64{a} libcupsimage2-dev{a} libcupsimage2t64{a} libdbus-1-3{a} libdebhelper-perl{a} libdeflate-dev{a} libdeflate0{a} libelf1t64{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libgio-2.0-dev{a} libgio-2.0-dev-bin{a} libgirepository-2.0-0{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libgssapi-krb5-2{a} libicu72{a} libjbig-dev{a} libjbig0{a} libjpeg-dev{a} libjpeg62-turbo{a} libjpeg62-turbo-dev{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} liblerc-dev{a} liblerc4{a} liblzma-dev{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libnsl2{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libpng-dev{a} libpng16-16t64{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libselinux1-dev{a} libsepol-dev{a} libsharpyuv-dev{a} libsharpyuv0{a} libsysprof-capture-4-dev{a} libtiff-dev{a} libtiff6{a} libtiffxx6{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libudev-dev{a} libusb-1.0-0{a} libusb-1.0-0-dev{a} libwebp-dev{a} libwebp7{a} libwebpdecoder3{a} libwebpdemux2{a} libwebpmux3{a} libxml2{a} libxml2-utils{a} libxslt1.1{a} libzstd-dev{a} m4{a} man-db{a} media-types{a} native-architecture{a} netbase{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-autocommand{a} python3-inflect{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-minimal{a} python3-more-itertools{a} python3-packaging{a} python3-pkg-resources{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} tzdata{a} uuid-dev{a} xml-core{a} xmlto{a} xsltproc{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl dblatex dbus fop git-buildpackage krb5-locales libarchive-cpio-perl libcupsfilters-dev libcupsfilters1t64 libltdl-dev libmail-sendmail-perl libpaper-utils libpng-tools libusb-1.0-doc lynx shared-mime-info wget xdg-user-dirs zip 0 packages upgraded, 134 newly installed, 0 to remove and 0 not upgraded. Need to get 44.1 MB of archives. After unpacking 198 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 autoconf-archive all 20220903-3 [775 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libpython3.12-minimal arm64 3.12.7-3 [808 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libexpat1 arm64 2.6.4-1 [90.7 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 python3.12-minimal arm64 3.12.7-3 [1940 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 python3-minimal arm64 3.12.6-1 [26.7 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 media-types all 10.1.0 [26.9 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 netbase all 6.4 [12.8 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 tzdata all 2024b-3 [255 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libkrb5support0 arm64 1.21.3-3 [32.1 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libcom-err2 arm64 1.47.1-1+b1 [23.1 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 libk5crypto3 arm64 1.21.3-3 [80.8 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 libkeyutils1 arm64 1.6.3-4 [9352 B] Get: 13 http://deb.debian.org/debian trixie/main arm64 libkrb5-3 arm64 1.21.3-3 [310 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 libgssapi-krb5-2 arm64 1.21.3-3 [126 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libtirpc3t64 arm64 1.3.4+ds-1.3+b1 [78.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libnsl2 arm64 1.3.0-3+b3 [37.9 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 readline-common all 8.2-5 [69.3 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libreadline8t64 arm64 8.2-5 [159 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libpython3.12-stdlib arm64 3.12.7-3 [1902 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 python3.12 arm64 3.12.7-3 [671 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 libpython3-stdlib arm64 3.12.6-1 [9692 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 python3 arm64 3.12.6-1 [27.8 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 sgml-base all 1.31 [15.4 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 42 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 43 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 44 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 45 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 46 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 47 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 48 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 49 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 50 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 51 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 52 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 53 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 54 http://deb.debian.org/debian trixie/main arm64 libglib2.0-0t64 arm64 2.82.2-2 [1409 kB] Get: 55 http://deb.debian.org/debian trixie/main arm64 desktop-file-utils arm64 0.27-2+b1 [89.2 kB] Get: 56 http://deb.debian.org/debian trixie/main arm64 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 57 http://deb.debian.org/debian trixie/main arm64 python3-more-itertools all 10.5.0-1 [63.8 kB] Get: 58 http://deb.debian.org/debian trixie/main arm64 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 59 http://deb.debian.org/debian trixie/main arm64 python3-typeguard all 4.4.1-1 [37.0 kB] Get: 60 http://deb.debian.org/debian trixie/main arm64 python3-inflect all 7.3.1-2 [32.4 kB] Get: 61 http://deb.debian.org/debian trixie/main arm64 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 62 http://deb.debian.org/debian trixie/main arm64 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 63 http://deb.debian.org/debian trixie/main arm64 python3-pkg-resources all 74.1.2-2 [213 kB] Get: 64 http://deb.debian.org/debian trixie/main arm64 python3-zipp all 3.21.0-1 [10.6 kB] Get: 65 http://deb.debian.org/debian trixie/main arm64 python3-setuptools all 74.1.2-2 [736 kB] Get: 66 http://deb.debian.org/debian trixie/main arm64 dh-python all 6.20241024 [109 kB] Get: 67 http://deb.debian.org/debian trixie/main arm64 xml-core all 0.19 [20.1 kB] Get: 68 http://deb.debian.org/debian trixie/main arm64 sgml-data all 2.0.11+nmu1 [179 kB] Get: 69 http://deb.debian.org/debian trixie/main arm64 docbook-xml all 4.5-13 [77.4 kB] Get: 70 http://deb.debian.org/debian trixie/main arm64 docbook-xsl all 1.79.2+dfsg-7 [1221 kB] Get: 71 http://deb.debian.org/debian trixie/main arm64 native-architecture all 0.2.3 [2108 B] Get: 72 http://deb.debian.org/debian trixie/main arm64 libgirepository-2.0-0 arm64 2.82.2-2 [129 kB] Get: 73 http://deb.debian.org/debian trixie/main arm64 girepository-tools arm64 2.82.2-2 [134 kB] Get: 74 http://deb.debian.org/debian trixie/main arm64 gnome-pkg-tools all 0.22.9 [17.2 kB] Get: 75 http://deb.debian.org/debian trixie/main arm64 libavahi-common-data arm64 0.8-13+b3 [112 kB] Get: 76 http://deb.debian.org/debian trixie/main arm64 libavahi-common3 arm64 0.8-13+b3 [42.3 kB] Get: 77 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.14.10-6 [196 kB] Get: 78 http://deb.debian.org/debian trixie/main arm64 libavahi-client3 arm64 0.8-13+b3 [46.0 kB] Get: 79 http://deb.debian.org/debian trixie/main arm64 uuid-dev arm64 2.40.2-11 [47.8 kB] Get: 80 http://deb.debian.org/debian trixie/main arm64 libblkid-dev arm64 2.40.2-11 [208 kB] Get: 81 http://deb.debian.org/debian trixie/main arm64 libcups2t64 arm64 2.4.10-2 [235 kB] Get: 82 http://deb.debian.org/debian trixie/main arm64 libcupsimage2t64 arm64 2.4.10-2 [18.3 kB] Get: 83 http://deb.debian.org/debian trixie/main arm64 libjpeg62-turbo arm64 1:2.1.5-3+b1 [173 kB] Get: 84 http://deb.debian.org/debian trixie/main arm64 libjpeg62-turbo-dev arm64 1:2.1.5-3+b1 [293 kB] Get: 85 http://deb.debian.org/debian trixie/main arm64 libjpeg-dev arm64 1:2.1.5-3+b1 [72.2 kB] Get: 86 http://deb.debian.org/debian trixie/main arm64 libpng16-16t64 arm64 1.6.44-2 [273 kB] Get: 87 http://deb.debian.org/debian trixie/main arm64 zlib1g-dev arm64 1:1.3.dfsg+really1.3.1-1+b1 [917 kB] Get: 88 http://deb.debian.org/debian trixie/main arm64 libpng-dev arm64 1.6.44-2 [360 kB] Get: 89 http://deb.debian.org/debian trixie/main arm64 libjbig0 arm64 2.1-6.1+b2 [30.4 kB] Get: 90 http://deb.debian.org/debian trixie/main arm64 libjbig-dev arm64 2.1-6.1+b2 [30.5 kB] Get: 91 http://deb.debian.org/debian trixie/main arm64 liblzma-dev arm64 5.6.3-1+b1 [312 kB] Get: 92 http://deb.debian.org/debian trixie/main arm64 libzstd-dev arm64 1.5.6+dfsg-1+b1 [329 kB] Get: 93 http://deb.debian.org/debian trixie/main arm64 libsharpyuv0 arm64 1.4.0-0.1+b1 [112 kB] Get: 94 http://deb.debian.org/debian trixie/main arm64 libwebp7 arm64 1.4.0-0.1+b1 [268 kB] Get: 95 http://deb.debian.org/debian trixie/main arm64 libwebpdemux2 arm64 1.4.0-0.1+b1 [110 kB] Get: 96 http://deb.debian.org/debian trixie/main arm64 libwebpmux3 arm64 1.4.0-0.1+b1 [122 kB] Get: 97 http://deb.debian.org/debian trixie/main arm64 libwebpdecoder3 arm64 1.4.0-0.1+b1 [179 kB] Get: 98 http://deb.debian.org/debian trixie/main arm64 libsharpyuv-dev arm64 1.4.0-0.1+b1 [115 kB] Get: 99 http://deb.debian.org/debian trixie/main arm64 libwebp-dev arm64 1.4.0-0.1+b1 [400 kB] Get: 100 http://deb.debian.org/debian trixie/main arm64 libdeflate0 arm64 1.22-1 [42.2 kB] Get: 101 http://deb.debian.org/debian trixie/main arm64 liblerc4 arm64 4.0.0+ds-5 [146 kB] Get: 102 http://deb.debian.org/debian trixie/main arm64 libtiff6 arm64 4.5.1+git230720-5 [309 kB] Get: 103 http://deb.debian.org/debian trixie/main arm64 libtiffxx6 arm64 4.5.1+git230720-5 [149 kB] Get: 104 http://deb.debian.org/debian trixie/main arm64 libdeflate-dev arm64 1.22-1 [51.2 kB] Get: 105 http://deb.debian.org/debian trixie/main arm64 liblerc-dev arm64 4.0.0+ds-5 [164 kB] Get: 106 http://deb.debian.org/debian trixie/main arm64 libtiff-dev arm64 4.5.1+git230720-5 [451 kB] Get: 107 http://deb.debian.org/debian trixie/main arm64 libcupsimage2-dev arm64 2.4.10-2 [6552 B] Get: 108 http://deb.debian.org/debian trixie/main arm64 libcups2-dev arm64 2.4.10-2 [295 kB] Get: 109 http://deb.debian.org/debian trixie/main arm64 libffi-dev arm64 3.4.6-1 [57.0 kB] Get: 110 http://deb.debian.org/debian trixie/main arm64 libsepol-dev arm64 3.7-1 [354 kB] Get: 111 http://deb.debian.org/debian trixie/main arm64 libpcre2-16-0 arm64 10.42-4+b2 [220 kB] Get: 112 http://deb.debian.org/debian trixie/main arm64 libpcre2-32-0 arm64 10.42-4+b2 [211 kB] Get: 113 http://deb.debian.org/debian trixie/main arm64 libpcre2-posix3 arm64 10.42-4+b2 [55.9 kB] Get: 114 http://deb.debian.org/debian trixie/main arm64 libpcre2-dev arm64 10.42-4+b2 [683 kB] Get: 115 http://deb.debian.org/debian trixie/main arm64 libselinux1-dev arm64 3.7-3+b1 [164 kB] Get: 116 http://deb.debian.org/debian trixie/main arm64 libmount-dev arm64 2.40.2-11 [28.9 kB] Get: 117 http://deb.debian.org/debian trixie/main arm64 libsysprof-capture-4-dev arm64 47.0-2 [48.9 kB] Get: 118 http://deb.debian.org/debian trixie/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 119 http://deb.debian.org/debian trixie/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 120 http://deb.debian.org/debian trixie/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 121 http://deb.debian.org/debian trixie/main arm64 libgio-2.0-dev arm64 2.82.2-2 [1690 kB] Get: 122 http://deb.debian.org/debian trixie/main arm64 python3-packaging all 24.2-1 [55.3 kB] Get: 123 http://deb.debian.org/debian trixie/main arm64 libgio-2.0-dev-bin arm64 2.82.2-2 [161 kB] Get: 124 http://deb.debian.org/debian trixie/main arm64 libglib2.0-data all 2.82.2-2 [1274 kB] Get: 125 http://deb.debian.org/debian trixie/main arm64 libglib2.0-bin arm64 2.82.2-2 [122 kB] Get: 126 http://deb.debian.org/debian trixie/main arm64 libglib2.0-dev-bin arm64 2.82.2-2 [51.1 kB] Get: 127 http://deb.debian.org/debian trixie/main arm64 libglib2.0-dev arm64 2.82.2-2 [51.8 kB] Get: 128 http://deb.debian.org/debian trixie/main arm64 libudev-dev arm64 257~rc2-3 [69.9 kB] Get: 129 http://deb.debian.org/debian trixie/main arm64 libusb-1.0-0 arm64 2:1.0.27-1+b1 [55.4 kB] Get: 130 http://deb.debian.org/debian trixie/main arm64 libusb-1.0-0-dev arm64 2:1.0.27-1+b1 [79.7 kB] Get: 131 http://deb.debian.org/debian trixie/main arm64 libxml2-utils arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [97.7 kB] Get: 132 http://deb.debian.org/debian trixie/main arm64 libxslt1.1 arm64 1.1.35-1.1+b1 [222 kB] Get: 133 http://deb.debian.org/debian trixie/main arm64 xsltproc arm64 1.1.35-1.1+b1 [115 kB] Get: 134 http://deb.debian.org/debian trixie/main arm64 xmlto arm64 0.0.28-3.1 [26.9 kB] Fetched 44.1 MB in 0s (126 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package autoconf-archive. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../autoconf-archive_20220903-3_all.deb ... Unpacking autoconf-archive (20220903-3) ... Selecting previously unselected package libpython3.12-minimal:arm64. Preparing to unpack .../libpython3.12-minimal_3.12.7-3_arm64.deb ... Unpacking libpython3.12-minimal:arm64 (3.12.7-3) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../libexpat1_2.6.4-1_arm64.deb ... Unpacking libexpat1:arm64 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.7-3_arm64.deb ... Unpacking python3.12-minimal (3.12.7-3) ... Setting up libpython3.12-minimal:arm64 (3.12.7-3) ... Setting up libexpat1:arm64 (2.6.4-1) ... Setting up python3.12-minimal (3.12.7-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21589 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.6-1_arm64.deb ... Unpacking python3-minimal (3.12.6-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-3_all.deb ... Unpacking tzdata (2024b-3) ... Selecting previously unselected package libkrb5support0:arm64. Preparing to unpack .../04-libkrb5support0_1.21.3-3_arm64.deb ... Unpacking libkrb5support0:arm64 (1.21.3-3) ... Selecting previously unselected package libcom-err2:arm64. Preparing to unpack .../05-libcom-err2_1.47.1-1+b1_arm64.deb ... Unpacking libcom-err2:arm64 (1.47.1-1+b1) ... Selecting previously unselected package libk5crypto3:arm64. Preparing to unpack .../06-libk5crypto3_1.21.3-3_arm64.deb ... Unpacking libk5crypto3:arm64 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:arm64. Preparing to unpack .../07-libkeyutils1_1.6.3-4_arm64.deb ... Unpacking libkeyutils1:arm64 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:arm64. Preparing to unpack .../08-libkrb5-3_1.21.3-3_arm64.deb ... Unpacking libkrb5-3:arm64 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:arm64. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_arm64.deb ... Unpacking libgssapi-krb5-2:arm64 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:arm64. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3+b1_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3 to /lib/aarch64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3.0.0 to /lib/aarch64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:arm64. Preparing to unpack .../12-libnsl2_1.3.0-3+b3_arm64.deb ... Unpacking libnsl2:arm64 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:arm64. Preparing to unpack .../14-libreadline8t64_8.2-5_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8 to /lib/aarch64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libhistory.so.8.2 to /lib/aarch64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8 to /lib/aarch64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/aarch64-linux-gnu/libreadline.so.8.2 to /lib/aarch64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:arm64 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:arm64. Preparing to unpack .../15-libpython3.12-stdlib_3.12.7-3_arm64.deb ... Unpacking libpython3.12-stdlib:arm64 (3.12.7-3) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.7-3_arm64.deb ... Unpacking python3.12 (3.12.7-3) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../17-libpython3-stdlib_3.12.6-1_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.12.6-1) ... Setting up python3-minimal (3.12.6-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 22651 files and directories currently installed.) Preparing to unpack .../000-python3_3.12.6-1_arm64.deb ... Unpacking python3 (3.12.6-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../001-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../002-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../003-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../004-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../005-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../006-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../007-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../008-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../009-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../010-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../011-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../012-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../013-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../014-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../015-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../016-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../017-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../018-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../019-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../020-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../021-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../022-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../023-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../024-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../025-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../026-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../027-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../028-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../029-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../030-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libglib2.0-0t64:arm64. Preparing to unpack .../031-libglib2.0-0t64_2.82.2-2_arm64.deb ... Unpacking libglib2.0-0t64:arm64 (2.82.2-2) ... Selecting previously unselected package desktop-file-utils. Preparing to unpack .../032-desktop-file-utils_0.27-2+b1_arm64.deb ... Unpacking desktop-file-utils (0.27-2+b1) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../033-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../034-python3-more-itertools_10.5.0-1_all.deb ... Unpacking python3-more-itertools (10.5.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../035-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../036-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../037-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../038-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../039-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../040-python3-pkg-resources_74.1.2-2_all.deb ... Unpacking python3-pkg-resources (74.1.2-2) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../041-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../042-python3-setuptools_74.1.2-2_all.deb ... Unpacking python3-setuptools (74.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../043-dh-python_6.20241024_all.deb ... Unpacking dh-python (6.20241024) ... Selecting previously unselected package xml-core. Preparing to unpack .../044-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package sgml-data. Preparing to unpack .../045-sgml-data_2.0.11+nmu1_all.deb ... Unpacking sgml-data (2.0.11+nmu1) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../046-docbook-xml_4.5-13_all.deb ... Unpacking docbook-xml (4.5-13) ... Selecting previously unselected package docbook-xsl. Preparing to unpack .../047-docbook-xsl_1.79.2+dfsg-7_all.deb ... Unpacking docbook-xsl (1.79.2+dfsg-7) ... Selecting previously unselected package native-architecture. Preparing to unpack .../048-native-architecture_0.2.3_all.deb ... Unpacking native-architecture (0.2.3) ... Selecting previously unselected package libgirepository-2.0-0:arm64. Preparing to unpack .../049-libgirepository-2.0-0_2.82.2-2_arm64.deb ... Unpacking libgirepository-2.0-0:arm64 (2.82.2-2) ... Selecting previously unselected package girepository-tools:arm64. Preparing to unpack .../050-girepository-tools_2.82.2-2_arm64.deb ... Unpacking girepository-tools:arm64 (2.82.2-2) ... Selecting previously unselected package gnome-pkg-tools. Preparing to unpack .../051-gnome-pkg-tools_0.22.9_all.deb ... Unpacking gnome-pkg-tools (0.22.9) ... Selecting previously unselected package libavahi-common-data:arm64. Preparing to unpack .../052-libavahi-common-data_0.8-13+b3_arm64.deb ... Unpacking libavahi-common-data:arm64 (0.8-13+b3) ... Selecting previously unselected package libavahi-common3:arm64. Preparing to unpack .../053-libavahi-common3_0.8-13+b3_arm64.deb ... Unpacking libavahi-common3:arm64 (0.8-13+b3) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../054-libdbus-1-3_1.14.10-6_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.14.10-6) ... Selecting previously unselected package libavahi-client3:arm64. Preparing to unpack .../055-libavahi-client3_0.8-13+b3_arm64.deb ... Unpacking libavahi-client3:arm64 (0.8-13+b3) ... Selecting previously unselected package uuid-dev:arm64. Preparing to unpack .../056-uuid-dev_2.40.2-11_arm64.deb ... Unpacking uuid-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libblkid-dev:arm64. Preparing to unpack .../057-libblkid-dev_2.40.2-11_arm64.deb ... Unpacking libblkid-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libcups2t64:arm64. Preparing to unpack .../058-libcups2t64_2.4.10-2_arm64.deb ... Unpacking libcups2t64:arm64 (2.4.10-2) ... Selecting previously unselected package libcupsimage2t64:arm64. Preparing to unpack .../059-libcupsimage2t64_2.4.10-2_arm64.deb ... Unpacking libcupsimage2t64:arm64 (2.4.10-2) ... Selecting previously unselected package libjpeg62-turbo:arm64. Preparing to unpack .../060-libjpeg62-turbo_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg62-turbo:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libjpeg62-turbo-dev:arm64. Preparing to unpack .../061-libjpeg62-turbo-dev_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg62-turbo-dev:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libjpeg-dev:arm64. Preparing to unpack .../062-libjpeg-dev_1%3a2.1.5-3+b1_arm64.deb ... Unpacking libjpeg-dev:arm64 (1:2.1.5-3+b1) ... Selecting previously unselected package libpng16-16t64:arm64. Preparing to unpack .../063-libpng16-16t64_1.6.44-2_arm64.deb ... Unpacking libpng16-16t64:arm64 (1.6.44-2) ... Selecting previously unselected package zlib1g-dev:arm64. Preparing to unpack .../064-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_arm64.deb ... Unpacking zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ... Selecting previously unselected package libpng-dev:arm64. Preparing to unpack .../065-libpng-dev_1.6.44-2_arm64.deb ... Unpacking libpng-dev:arm64 (1.6.44-2) ... Selecting previously unselected package libjbig0:arm64. Preparing to unpack .../066-libjbig0_2.1-6.1+b2_arm64.deb ... Unpacking libjbig0:arm64 (2.1-6.1+b2) ... Selecting previously unselected package libjbig-dev:arm64. Preparing to unpack .../067-libjbig-dev_2.1-6.1+b2_arm64.deb ... Unpacking libjbig-dev:arm64 (2.1-6.1+b2) ... Selecting previously unselected package liblzma-dev:arm64. Preparing to unpack .../068-liblzma-dev_5.6.3-1+b1_arm64.deb ... Unpacking liblzma-dev:arm64 (5.6.3-1+b1) ... Selecting previously unselected package libzstd-dev:arm64. Preparing to unpack .../069-libzstd-dev_1.5.6+dfsg-1+b1_arm64.deb ... Unpacking libzstd-dev:arm64 (1.5.6+dfsg-1+b1) ... Selecting previously unselected package libsharpyuv0:arm64. Preparing to unpack .../070-libsharpyuv0_1.4.0-0.1+b1_arm64.deb ... Unpacking libsharpyuv0:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebp7:arm64. Preparing to unpack .../071-libwebp7_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebp7:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpdemux2:arm64. Preparing to unpack .../072-libwebpdemux2_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpdemux2:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpmux3:arm64. Preparing to unpack .../073-libwebpmux3_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpmux3:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebpdecoder3:arm64. Preparing to unpack .../074-libwebpdecoder3_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebpdecoder3:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libsharpyuv-dev:arm64. Preparing to unpack .../075-libsharpyuv-dev_1.4.0-0.1+b1_arm64.deb ... Unpacking libsharpyuv-dev:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libwebp-dev:arm64. Preparing to unpack .../076-libwebp-dev_1.4.0-0.1+b1_arm64.deb ... Unpacking libwebp-dev:arm64 (1.4.0-0.1+b1) ... Selecting previously unselected package libdeflate0:arm64. Preparing to unpack .../077-libdeflate0_1.22-1_arm64.deb ... Unpacking libdeflate0:arm64 (1.22-1) ... Selecting previously unselected package liblerc4:arm64. Preparing to unpack .../078-liblerc4_4.0.0+ds-5_arm64.deb ... Unpacking liblerc4:arm64 (4.0.0+ds-5) ... Selecting previously unselected package libtiff6:arm64. Preparing to unpack .../079-libtiff6_4.5.1+git230720-5_arm64.deb ... Unpacking libtiff6:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libtiffxx6:arm64. Preparing to unpack .../080-libtiffxx6_4.5.1+git230720-5_arm64.deb ... Unpacking libtiffxx6:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libdeflate-dev:arm64. Preparing to unpack .../081-libdeflate-dev_1.22-1_arm64.deb ... Unpacking libdeflate-dev:arm64 (1.22-1) ... Selecting previously unselected package liblerc-dev:arm64. Preparing to unpack .../082-liblerc-dev_4.0.0+ds-5_arm64.deb ... Unpacking liblerc-dev:arm64 (4.0.0+ds-5) ... Selecting previously unselected package libtiff-dev:arm64. Preparing to unpack .../083-libtiff-dev_4.5.1+git230720-5_arm64.deb ... Unpacking libtiff-dev:arm64 (4.5.1+git230720-5) ... Selecting previously unselected package libcupsimage2-dev:arm64. Preparing to unpack .../084-libcupsimage2-dev_2.4.10-2_arm64.deb ... Unpacking libcupsimage2-dev:arm64 (2.4.10-2) ... Selecting previously unselected package libcups2-dev:arm64. Preparing to unpack .../085-libcups2-dev_2.4.10-2_arm64.deb ... Unpacking libcups2-dev:arm64 (2.4.10-2) ... Selecting previously unselected package libffi-dev:arm64. Preparing to unpack .../086-libffi-dev_3.4.6-1_arm64.deb ... Unpacking libffi-dev:arm64 (3.4.6-1) ... Selecting previously unselected package libsepol-dev:arm64. Preparing to unpack .../087-libsepol-dev_3.7-1_arm64.deb ... Unpacking libsepol-dev:arm64 (3.7-1) ... Selecting previously unselected package libpcre2-16-0:arm64. Preparing to unpack .../088-libpcre2-16-0_10.42-4+b2_arm64.deb ... Unpacking libpcre2-16-0:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-32-0:arm64. Preparing to unpack .../089-libpcre2-32-0_10.42-4+b2_arm64.deb ... Unpacking libpcre2-32-0:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-posix3:arm64. Preparing to unpack .../090-libpcre2-posix3_10.42-4+b2_arm64.deb ... Unpacking libpcre2-posix3:arm64 (10.42-4+b2) ... Selecting previously unselected package libpcre2-dev:arm64. Preparing to unpack .../091-libpcre2-dev_10.42-4+b2_arm64.deb ... Unpacking libpcre2-dev:arm64 (10.42-4+b2) ... Selecting previously unselected package libselinux1-dev:arm64. Preparing to unpack .../092-libselinux1-dev_3.7-3+b1_arm64.deb ... Unpacking libselinux1-dev:arm64 (3.7-3+b1) ... Selecting previously unselected package libmount-dev:arm64. Preparing to unpack .../093-libmount-dev_2.40.2-11_arm64.deb ... Unpacking libmount-dev:arm64 (2.40.2-11) ... Selecting previously unselected package libsysprof-capture-4-dev:arm64. Preparing to unpack .../094-libsysprof-capture-4-dev_47.0-2_arm64.deb ... Unpacking libsysprof-capture-4-dev:arm64 (47.0-2) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../095-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../096-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../097-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package libgio-2.0-dev:arm64. Preparing to unpack .../098-libgio-2.0-dev_2.82.2-2_arm64.deb ... Unpacking libgio-2.0-dev:arm64 (2.82.2-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../099-python3-packaging_24.2-1_all.deb ... Unpacking python3-packaging (24.2-1) ... Selecting previously unselected package libgio-2.0-dev-bin. Preparing to unpack .../100-libgio-2.0-dev-bin_2.82.2-2_arm64.deb ... Unpacking libgio-2.0-dev-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../101-libglib2.0-data_2.82.2-2_all.deb ... Unpacking libglib2.0-data (2.82.2-2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../102-libglib2.0-bin_2.82.2-2_arm64.deb ... Unpacking libglib2.0-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../103-libglib2.0-dev-bin_2.82.2-2_arm64.deb ... Unpacking libglib2.0-dev-bin (2.82.2-2) ... Selecting previously unselected package libglib2.0-dev:arm64. Preparing to unpack .../104-libglib2.0-dev_2.82.2-2_arm64.deb ... Unpacking libglib2.0-dev:arm64 (2.82.2-2) ... Selecting previously unselected package libudev-dev:arm64. Preparing to unpack .../105-libudev-dev_257~rc2-3_arm64.deb ... Unpacking libudev-dev:arm64 (257~rc2-3) ... Selecting previously unselected package libusb-1.0-0:arm64. Preparing to unpack .../106-libusb-1.0-0_2%3a1.0.27-1+b1_arm64.deb ... Unpacking libusb-1.0-0:arm64 (2:1.0.27-1+b1) ... Selecting previously unselected package libusb-1.0-0-dev:arm64. Preparing to unpack .../107-libusb-1.0-0-dev_2%3a1.0.27-1+b1_arm64.deb ... Unpacking libusb-1.0-0-dev:arm64 (2:1.0.27-1+b1) ... Selecting previously unselected package libxml2-utils. Preparing to unpack .../108-libxml2-utils_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package libxslt1.1:arm64. Preparing to unpack .../109-libxslt1.1_1.1.35-1.1+b1_arm64.deb ... Unpacking libxslt1.1:arm64 (1.1.35-1.1+b1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../110-xsltproc_1.1.35-1.1+b1_arm64.deb ... Unpacking xsltproc (1.1.35-1.1+b1) ... Selecting previously unselected package xmlto. Preparing to unpack .../111-xmlto_0.0.28-3.1_arm64.deb ... Unpacking xmlto (0.0.28-3.1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libsharpyuv0:arm64 (1.4.0-0.1+b1) ... Setting up libkeyutils1:arm64 (1.6.3-4) ... Setting up native-architecture (0.2.3) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up liblerc4:arm64 (4.0.0+ds-5) ... Setting up libzstd-dev:arm64 (1.5.6+dfsg-1+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libdeflate0:arm64 (1.22-1) ... Setting up libwebpdecoder3:arm64 (1.4.0-0.1+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up autoconf-archive (20220903-3) ... Setting up libcom-err2:arm64 (1.47.1-1+b1) ... Setting up file (1:5.45-3+b1) ... Setting up libffi-dev:arm64 (3.4.6-1) ... Setting up libjbig0:arm64 (2.1-6.1+b2) ... Setting up libpcre2-16-0:arm64 (10.42-4+b2) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up libkrb5support0:arm64 (1.21.3-3) ... Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Dec 28 22:06:25 UTC 2025. Universal Time is now: Sun Dec 28 22:06:25 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:arm64 (47.0-2) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:arm64 (10.42-4+b2) ... Setting up libglib2.0-0t64:arm64 (2.82.2-2) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.82.2-2) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libjpeg62-turbo:arm64 (1:2.1.5-3+b1) ... Setting up libjpeg62-turbo-dev:arm64 (1:2.1.5-3+b1) ... Setting up uuid-dev:arm64 (2.40.2-11) ... Setting up libavahi-common-data:arm64 (0.8-13+b3) ... Setting up libdbus-1-3:arm64 (1.14.10-6) ... Setting up gnome-pkg-tools (0.22.9) ... Setting up libpng16-16t64:arm64 (1.6.44-2) ... Setting up autopoint (0.22.5-2) ... Setting up libudev-dev:arm64 (257~rc2-3) ... Setting up libsepol-dev:arm64 (3.7-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up liblerc-dev:arm64 (4.0.0+ds-5) ... Setting up libk5crypto3:arm64 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libwebp7:arm64 (1.4.0-0.1+b1) ... Setting up liblzma-dev:arm64 (5.6.3-1+b1) ... Setting up zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ... Setting up libpcre2-posix3:arm64 (10.42-4+b2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libtiff6:arm64 (4.5.1+git230720-5) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up libkrb5-3:arm64 (1.21.3-3) ... Setting up libusb-1.0-0:arm64 (2:1.0.27-1+b1) ... Setting up libsharpyuv-dev:arm64 (1.4.0-0.1+b1) ... Setting up libwebpmux3:arm64 (1.4.0-0.1+b1) ... Setting up libtiffxx6:arm64 (4.5.1+git230720-5) ... Setting up libdeflate-dev:arm64 (1.22-1) ... Setting up readline-common (8.2-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libblkid-dev:arm64 (2.40.2-11) ... Setting up gettext (0.22.5-2) ... Setting up desktop-file-utils (0.27-2+b1) ... Setting up libpcre2-dev:arm64 (10.42-4+b2) ... Setting up libtool (2.4.7-8) ... Setting up libgirepository-2.0-0:arm64 (2.82.2-2) ... Setting up libselinux1-dev:arm64 (3.7-3+b1) ... Setting up libwebpdemux2:arm64 (1.4.0-0.1+b1) ... Setting up libpng-dev:arm64 (1.6.44-2) ... Setting up libavahi-common3:arm64 (0.8-13+b3) ... Setting up libjpeg-dev:arm64 (1:2.1.5-3+b1) ... Setting up libjbig-dev:arm64 (2.1-6.1+b2) ... Setting up libglib2.0-bin (2.82.2-2) ... Setting up libusb-1.0-0-dev:arm64 (2:1.0.27-1+b1) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libwebp-dev:arm64 (1.4.0-0.1+b1) ... Setting up libtiff-dev:arm64 (4.5.1+git230720-5) ... Setting up libgssapi-krb5-2:arm64 (1.21.3-3) ... Setting up libreadline8t64:arm64 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up xml-core (0.19) ... Setting up libxslt1.1:arm64 (1.1.35-1.1+b1) ... Setting up libxml2-utils (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libavahi-client3:arm64 (0.8-13+b3) ... Setting up libmount-dev:arm64 (2.40.2-11) ... Setting up libgio-2.0-dev:arm64 (2.82.2-2) ... Setting up girepository-tools:arm64 (2.82.2-2) ... Setting up libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up xsltproc (1.1.35-1.1+b1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:arm64 (1.3.0-3+b3) ... Setting up libcups2t64:arm64 (2.4.10-2) ... Setting up libpython3.12-stdlib:arm64 (3.12.7-3) ... Setting up python3.12 (3.12.7-3) ... Setting up debhelper (13.20) ... Setting up libcupsimage2t64:arm64 (2.4.10-2) ... Setting up libpython3-stdlib:arm64 (3.12.6-1) ... Setting up python3 (3.12.6-1) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-packaging (24.2-1) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-more-itertools (10.5.0-1) ... Setting up libgio-2.0-dev-bin (2.82.2-2) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-pkg-resources (74.1.2-2) ... Setting up libglib2.0-dev-bin (2.82.2-2) ... Setting up python3-setuptools (74.1.2-2) ... Setting up libglib2.0-dev:arm64 (2.82.2-2) ... Setting up dh-python (6.20241024) ... Setting up libcups2-dev:arm64 (2.4.10-2) ... Setting up libcupsimage2-dev:arm64 (2.4.10-2) ... Processing triggers for libc-bin (2.40-3) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xsl (1.79.2+dfsg-7) ... Setting up sgml-data (2.0.11+nmu1) ... Processing triggers for sgml-base (1.31) ... Setting up docbook-xml (4.5-13) ... Processing triggers for sgml-base (1.31) ... Setting up xmlto (0.0.28-3.1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/system-config-printer-1.5.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../system-config-printer_1.5.18-3_source.changes dpkg-buildpackage: info: source package system-config-printer dpkg-buildpackage: info: source version 1.5.18-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Michael Biebl dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --buildsystem=autoconf dh_auto_clean -O--buildsystem=autoconf dh_autoreconf_clean -O--buildsystem=autoconf dh_clean -O--buildsystem=autoconf debian/rules execute_after_dh_clean make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' rm -f dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' debian/rules binary dh binary --buildsystem=autoconf dh_update_autotools_config -O--buildsystem=autoconf debian/rules override_dh_autoreconf make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_autoreconf ./bootstrap Creating directory m4 Copying file m4/gettext.m4 Copying file m4/host-cpu-c-abi.m4 Copying file m4/iconv.m4 Copying file m4/intlmacosx.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/progtest.m4 Copying file po/Makevars.template configure.ac:20: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:20: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:20: the top level configure.ac:65: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:65: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:65: the top level configure.ac:101: warning: The macro 'AC_HELP_STRING' is obsolete. configure.ac:101: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.ac:101: the top level make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_configure -- --with-udev-rules \ --with-udevdir=/usr/lib/udev \ --with-systemdsystemunitdir=/usr/lib/systemd/system \ --with-cups-serverbin-dir=/usr/lib/cups ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-udev-rules --with-udevdir=/usr/lib/udev --with-systemdsystemunitdir=/usr/lib/systemd/system --with-cups-serverbin-dir=/usr/lib/cups checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for egrep -e... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.12 checking for python3 platform... linux checking for GNU default python3 prefix... ${prefix} checking for GNU default python3 exec_prefix... ${exec_prefix} checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.12/site-packages checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUPS SERVERBIN dir... /usr/lib/cups checking for glib-2.0... yes checking for libudev >= 172... yes checking for libusb-1.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_build -O--buildsystem=autoconf make -j12 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making all in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml Warning: program compiled against libxml 212 using older 209 /usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.18|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir /usr/bin/mkdir -p cupshelpers sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c /usr/bin/python3 setup.py build udev/udev-configure-printer.c: In function 'device_id_from_devpath': udev/udev-configure-printer.c:856:10: warning: passing argument 1 of 'g_free' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 856 | g_free(device_id); | ^~~~~~~~~ In file included from /usr/include/glib-2.0/glib/glist.h:34, from /usr/include/glib-2.0/glib/ghash.h:36, from /usr/include/glib-2.0/glib.h:52, from udev/udev-configure-printer.c:52: /usr/include/glib-2.0/glib/gmem.h:74:46: note: expected 'gpointer' {aka 'void *'} but argument is of type 'const char *' 74 | void (g_free) (gpointer mem); | ~~~~~~~~~~~~~~~~~~^~~ udev/udev-configure-printer.c: In function 'find_matching_device_uris': udev/udev-configure-printer.c:1031:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1031 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:19, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'for_each_matching_queue': udev/udev-configure-printer.c:1362:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1362 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'enable_queue': udev/udev-configure-printer.c:1553:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1553 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'remove_queue': udev/udev-configure-printer.c:1745:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1745 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'disable_queue': udev/udev-configure-printer.c:1777:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1777 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 touch .stamp-man-pages-built gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,-z,defs -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making all in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_auto_test -O--buildsystem=autoconf make -j12 check "TESTSUITEFLAGS=-j12 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making check in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make check-TESTS make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' make[4]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' echo "#!/bin/bash" > "test-xml-validity.sh" echo "set -e" >> "test-xml-validity.sh" echo "xmllint --relaxng \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.rng \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml >/dev/null" >> "test-xml-validity.sh" echo "/usr/bin/python3 ./xml/validate.py \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml" >> "test-xml-validity.sh" chmod 755 "test-xml-validity.sh" echo "#!/bin/bash" > "py.test.sh" echo "exec " >> "py.test.sh" chmod 755 "py.test.sh" PASS: py.test.sh PASS: test-xml-validity.sh ============================================================================ Testsuite summary for system-config-printer 1.5.18 ============================================================================ # TOTAL: 2 # PASS: 2 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making check in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=autoconf dh_prep -O--buildsystem=autoconf dh_auto_install -O--buildsystem=autoconf make -j12 install DESTDIR=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in . make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' /usr/bin/python3 setup.py install --root=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp --prefix=/usr --install-layout=deb /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c -m 644 udev/configure-printer@.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/.' /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/install -c udev/udev-add-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/install -c udev/udev-configure-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' /usr/bin/install -c -m 644 udev/70-printers.rules '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' /usr/bin/install -c troubleshoot/__init__.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' /usr/bin/install -c -m 644 icons/i-network-printer.png '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in po make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition installing ar.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo if test "system-config-printer" = "gettext-tools"; then \ /usr/bin/mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18/po' make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_install -O--buildsystem=autoconf dh_installdocs -O--buildsystem=autoconf dh_installchangelogs -O--buildsystem=autoconf dh_installman -O--buildsystem=autoconf debian/rules override_dh_python3 make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_python3 -ppython3-cupshelpers dh_python3 -psystem-config-printer /usr/share/system-config-printer/ dh_python3 -psystem-config-printer-common /usr/share/system-config-printer/ make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_installsystemd -O--buildsystem=autoconf dh_installsystemduser -O--buildsystem=autoconf dh_gnome -O--buildsystem=autoconf dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf Normalized debian/system-config-printer-common/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -a -O--buildsystem=autoconf dh_strip -a -O--buildsystem=autoconf dh_makeshlibs -a -O--buildsystem=autoconf dh_shlibdeps -a -O--buildsystem=autoconf dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb -O--buildsystem=autoconf debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' dh_gencontrol -- \ -Vpysmbc:Recommends="python3-smbc" dpkg-gencontrol: warning: Suggests field of package system-config-printer-common: substitution variable ${pysmbc:Suggests} used, but is not defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf dpkg-deb: building package 'system-config-printer' in '../system-config-printer_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev-dbgsym' in '../system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb'. dpkg-deb: building package 'system-config-printer-common' in '../system-config-printer-common_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev' in '../system-config-printer-udev_1.5.18-3_arm64.deb'. dpkg-deb: building package 'python3-cupshelpers' in '../python3-cupshelpers_1.5.18-3_all.deb'. dpkg-genbuildinfo --build=binary -O../system-config-printer_1.5.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../system-config-printer_1.5.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3494775 and its subdirectories I: Current time: Mon Dec 29 12:06:54 +14 2025 I: pbuilder-time-stamp: 1766959614 + false + set +x Sun Dec 28 22:06:54 UTC 2025 I: Signing ./b2/system-config-printer_1.5.18-3_arm64.buildinfo as system-config-printer_1.5.18-3_arm64.buildinfo.asc Sun Dec 28 22:06:54 UTC 2025 I: Signed ./b2/system-config-printer_1.5.18-3_arm64.buildinfo as ./b2/system-config-printer_1.5.18-3_arm64.buildinfo.asc Sun Dec 28 22:06:54 UTC 2025 - build #2 for system-config-printer/trixie/arm64 on codethink01-arm64 done. Starting cleanup. All cleanup done. Sun Dec 28 22:06:54 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-HEmNRG8y, removing. /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww: total 124 drwxr-xr-x 2 jenkins jenkins 4096 Nov 25 15:43 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 25 15:43 b2 -rw------- 1 jenkins jenkins 106936 Nov 25 15:43 rbuildlog.oaSFaGJ -rw-r--r-- 1 jenkins jenkins 2660 Jun 6 16:39 system-config-printer_1.5.18-3.dsc /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1: total 1424 -rw-r--r-- 1 jenkins jenkins 102766 Nov 25 15:43 build.log -rw-r--r-- 1 jenkins jenkins 127748 Nov 25 15:43 python3-cupshelpers_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 801928 Nov 25 15:43 system-config-printer-common_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 40340 Nov 25 15:43 system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb -rw-r--r-- 1 jenkins jenkins 114956 Nov 25 15:43 system-config-printer-udev_1.5.18-3_arm64.deb -rw-r--r-- 1 jenkins jenkins 13488 Nov 25 15:43 system-config-printer_1.5.18-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2660 Nov 25 15:43 system-config-printer_1.5.18-3.dsc -rw-r--r-- 1 jenkins jenkins 183792 Nov 25 15:43 system-config-printer_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 9619 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 10501 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2938 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1483 Nov 25 15:43 system-config-printer_1.5.18-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2: total 1404 -rw-r--r-- 1 jenkins jenkins 104709 Nov 25 15:43 build.log -rw-r--r-- 1 jenkins jenkins 127748 Nov 25 15:43 python3-cupshelpers_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 801928 Nov 25 15:43 system-config-printer-common_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 40340 Nov 25 15:43 system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb -rw-r--r-- 1 jenkins jenkins 114956 Nov 25 15:43 system-config-printer-udev_1.5.18-3_arm64.deb -rw-r--r-- 1 jenkins jenkins 13488 Nov 25 15:43 system-config-printer_1.5.18-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2660 Nov 25 15:43 system-config-printer_1.5.18-3.dsc -rw-r--r-- 1 jenkins jenkins 183792 Nov 25 15:43 system-config-printer_1.5.18-3_all.deb -rw-r--r-- 1 jenkins jenkins 9619 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 10501 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2938 Nov 25 15:43 system-config-printer_1.5.18-3_arm64.changes -rw-r--r-- 1 jenkins jenkins 1483 Nov 25 15:43 system-config-printer_1.5.18-3_source.changes Mon Nov 25 15:43:55 UTC 2024 I: Deleting $TMPDIR on codethink01-arm64.debian.net. Mon Nov 25 15:43:56 UTC 2024 I: system-config-printer_1.5.18-3_arm64.changes: Format: 1.8 Date: Thu, 06 Jun 2024 17:58:59 +0200 Source: system-config-printer Binary: python3-cupshelpers system-config-printer system-config-printer-common system-config-printer-udev system-config-printer-udev-dbgsym Architecture: all arm64 Version: 1.5.18-3 Distribution: unstable Urgency: medium Maintainer: Debian GNOME Maintainers Changed-By: Michael Biebl Description: python3-cupshelpers - Python utility modules around the CUPS printing system system-config-printer - graphical interface to configure the printing system system-config-printer-common - backend and the translation files for system-config-printer system-config-printer-udev - Utilities to detect and configure printers automatically Changes: system-config-printer (1.5.18-3) unstable; urgency=medium . * Team upload. * Install udev files and systemd units into /usr * Add versioned Build-Depends on debhelper (>= 13.11.6) * Drop obsolete Breaks/Replaces from pre-oldstable Checksums-Sha1: d90a8bedff110b587effff1d58a4ee4a1d476b9b 127748 python3-cupshelpers_1.5.18-3_all.deb 25edd367beccde48361620775770763224aa1339 801928 system-config-printer-common_1.5.18-3_all.deb 2c4b095f1aed2ba8f8743447015f0bbb5e1deea2 40340 system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb 8cbaf19cc205a630b4e10baec5ccfa849eacda0f 114956 system-config-printer-udev_1.5.18-3_arm64.deb 4751f38511b15a9944eb6d96cc1da7283efdbcdf 183792 system-config-printer_1.5.18-3_all.deb e6d77969cd09c6ce7bb3b184fcab091f11681a99 9619 system-config-printer_1.5.18-3_arm64.buildinfo Checksums-Sha256: f542b78181cc1226d25ed48e5c694ca603d778191e79c9199bb711e3885630af 127748 python3-cupshelpers_1.5.18-3_all.deb 581d14b55178cfb99c742c7e13fc19bb0f0f3c0877410bf94dbb45ae91ede1a7 801928 system-config-printer-common_1.5.18-3_all.deb 87f4910c1c9832bf9e580a48dd845c932799c98fe88986ba40b5f9d654e1859c 40340 system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb 2ffba6f3c45a00ccee224848cc21336f1e27d754c7323e54370ceb6fa5e3fcc7 114956 system-config-printer-udev_1.5.18-3_arm64.deb d6682474d094f26dbfeabc1e7ea6dc3474ca399d13bf9d17f5dad9b059db1694 183792 system-config-printer_1.5.18-3_all.deb 6d7ab4eb04aa82156fc7b88335bdd6b078eb91f1954396cf8c8262219a8963d2 9619 system-config-printer_1.5.18-3_arm64.buildinfo Files: 0c7c976b9d6ce1c2068921bb690f848e 127748 python optional python3-cupshelpers_1.5.18-3_all.deb 80b9b63c876751ba3424deacb3a9ad38 801928 gnome optional system-config-printer-common_1.5.18-3_all.deb 9accffa0895e91e17fc672a965e2aa77 40340 debug optional system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb 835ad02119ee752eaca61eb03107b52e 114956 gnome optional system-config-printer-udev_1.5.18-3_arm64.deb 8c7ed3995d8af10d5d87de92573db2d9 183792 gnome optional system-config-printer_1.5.18-3_all.deb f6772bea28ff7fc8dcd3107f07af092f 9619 gnome optional system-config-printer_1.5.18-3_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/system-config-printer_1.5.18-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/system-config-printer_1.5.18-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/system-config-printer_1.5.18-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/system-config-printer_1.5.18-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/system-config-printer_1.5.18-3_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/system-config-printer_1.5.18-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-25 15:43:04.495918630 +0000 +++ b2/build.log 2024-11-25 15:43:55.389619178 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Mon Nov 25 03:42:14 -12 2024 -I: pbuilder-time-stamp: 1732549334 +I: Current time: Mon Dec 29 12:06:07 +14 2025 +I: pbuilder-time-stamp: 1766959567 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -32,52 +32,84 @@ dpkg-source: info: applying makefile-am-fix-setup-py-install.patch I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/2095298/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D01_modify_environment starting +debug: Running on codethink01-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 28 22:06 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='b6dad2bad7504784ac21431c2fce2f29' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='2095298' - PS1='# ' - PS2='> ' + INVOCATION_ID=01ee939181534abcbaae716f901eb454 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=3494775 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_QiiT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1 --logfile b1/build.log system-config-printer_1.5.18-3.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/pbuilderrc_1n49 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2 --logfile b2/build.log system-config-printer_1.5.18-3.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-28-cloud-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-28-cloud-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/2095298/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -267,7 +299,7 @@ Get: 132 http://deb.debian.org/debian trixie/main arm64 libxslt1.1 arm64 1.1.35-1.1+b1 [222 kB] Get: 133 http://deb.debian.org/debian trixie/main arm64 xsltproc arm64 1.1.35-1.1+b1 [115 kB] Get: 134 http://deb.debian.org/debian trixie/main arm64 xmlto arm64 0.0.28-3.1 [26.9 kB] -Fetched 44.1 MB in 0s (138 MB/s) +Fetched 44.1 MB in 0s (126 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package autoconf-archive. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) @@ -713,8 +745,8 @@ Setting up tzdata (2024b-3) ... Current default time zone: 'Etc/UTC' -Local time is now: Mon Nov 25 15:42:36 UTC 2024. -Universal Time is now: Mon Nov 25 15:42:36 UTC 2024. +Local time is now: Sun Dec 28 22:06:25 UTC 2025. +Universal Time is now: Sun Dec 28 22:06:25 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:arm64 (47.0-2) ... @@ -836,7 +868,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/system-config-printer-1.5.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../system-config-printer_1.5.18-3_source.changes +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/system-config-printer-1.5.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../system-config-printer_1.5.18-3_source.changes dpkg-buildpackage: info: source package system-config-printer dpkg-buildpackage: info: source version 1.5.18-3 dpkg-buildpackage: info: source distribution unstable @@ -968,8 +1004,8 @@ make[2]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml -/usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop Warning: program compiled against libxml 212 using older 209 +/usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop sed \ -e "s|\@prefix\@|/usr|" \ @@ -990,12 +1026,12 @@ fi touch .stamp-distutils-in-builddir /usr/bin/mkdir -p cupshelpers -gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py +gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/sysprof-6 -pthread -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/system-config-printer-1.5.18=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c /usr/bin/python3 setup.py build udev/udev-configure-printer.c: In function 'device_id_from_devpath': udev/udev-configure-printer.c:856:10: warning: passing argument 1 of 'g_free' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] @@ -1073,16 +1109,16 @@ make[3]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' make[4]: Entering directory '/build/reproducible-path/system-config-printer-1.5.18' echo "#!/bin/bash" > "test-xml-validity.sh" -echo "#!/bin/bash" > "py.test.sh" echo "set -e" >> "test-xml-validity.sh" -echo "exec " >> "py.test.sh" echo "xmllint --relaxng \\" >> "test-xml-validity.sh" -chmod 755 "py.test.sh" echo " ./xml/preferreddrivers.rng \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml >/dev/null" >> "test-xml-validity.sh" echo "/usr/bin/python3 ./xml/validate.py \\" >> "test-xml-validity.sh" echo " ./xml/preferreddrivers.xml" >> "test-xml-validity.sh" chmod 755 "test-xml-validity.sh" +echo "#!/bin/bash" > "py.test.sh" +echo "exec " >> "py.test.sh" +chmod 755 "py.test.sh" PASS: py.test.sh PASS: test-xml-validity.sh ============================================================================ @@ -1118,13 +1154,15 @@ /usr/bin/python3 setup.py install --root=/build/reproducible-path/system-config-printer-1.5.18/debian/tmp --prefix=/usr --install-layout=deb /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' + /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' + /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' +mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' + /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/dbus-1/system.d/' -mkdir -p /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/applications/ \ --add-category System \ @@ -1133,8 +1171,6 @@ --add-category Printing \ --add-category GTK \ system-config-printer.desktop - /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/bin' - /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/cupshelpers' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/interfaces/' desktop-file-install \ --dir /build/reproducible-path/system-config-printer-1.5.18/debian/tmp/etc/xdg/autostart/ \ @@ -1142,32 +1178,11 @@ --add-category Monitor \ --add-category GTK \ print-applet.desktop - /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/metainfo' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' - /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' - /usr/bin/install -c -m 644 udev/configure-printer@.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' - /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' - /usr/bin/install -c udev/udev-add-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' - /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' - /usr/bin/install -c udev/udev-configure-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' - /usr/bin/install -c troubleshoot/__init__.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' - /usr/bin/install -c -m 644 udev/70-printers.rules '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' - /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' - /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/.' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' - /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' - /usr/bin/install -c -m 644 icons/i-network-printer.png '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' - /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' - /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! @@ -1181,6 +1196,27 @@ !! self.initialize_options() + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' + /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/dbus-1/services/' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' + /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/man/man1' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' + /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot' + /usr/bin/install -c -m 644 udev/configure-printer@.service '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/systemd/system' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' + /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/.' + /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer' + /usr/bin/install -c udev/udev-add-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' + /usr/bin/install -c udev/udev-configure-printer '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' + /usr/bin/install -c -m 644 udev/70-printers.rules '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/lib/udev/rules.d' + /usr/bin/install -c troubleshoot/__init__.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/troubleshoot/' + /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/xml' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' + /usr/bin/install -c -m 644 icons/i-network-printer.png '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/icons' + /usr/bin/mkdir -p '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' + /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/reproducible-path/system-config-printer-1.5.18/debian/tmp/usr/share/system-config-printer/ui' make[3]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' make[2]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' Making install in po @@ -1281,12 +1317,6 @@ dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf - Normalized debian/system-config-printer-common/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo @@ -1299,53 +1329,59 @@ Normalized debian/system-config-printer-common/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo - Normalized debian/system-config-printer-common/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo Normalized debian/system-config-printer-common/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo + Normalized debian/system-config-printer-common/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf @@ -1363,22 +1399,22 @@ dh_gencontrol -- \ -Vpysmbc:Recommends="python3-smbc" dpkg-gencontrol: warning: Suggests field of package system-config-printer-common: substitution variable ${pysmbc:Suggests} used, but is not defined -dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextVersion} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:UpstreamVersion} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:Version} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextVersion} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:UpstreamVersion} unused, but is defined -dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:Version} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:NextVersion} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:UpstreamVersion} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer-common: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:UpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package python3-cupshelpers: substitution variable ${gnome:Version} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:NextVersion} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:UpstreamVersion} unused, but is defined +dpkg-gencontrol: warning: package system-config-printer: substitution variable ${gnome:Version} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextUpstreamVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:NextVersion} unused, but is defined dpkg-gencontrol: warning: package system-config-printer-udev: substitution variable ${gnome:UpstreamVersion} unused, but is defined @@ -1386,11 +1422,11 @@ make[1]: Leaving directory '/build/reproducible-path/system-config-printer-1.5.18' dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf -dpkg-deb: building package 'system-config-printer-common' in '../system-config-printer-common_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer' in '../system-config-printer_1.5.18-3_all.deb'. +dpkg-deb: building package 'system-config-printer-udev-dbgsym' in '../system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb'. +dpkg-deb: building package 'system-config-printer-common' in '../system-config-printer-common_1.5.18-3_all.deb'. dpkg-deb: building package 'system-config-printer-udev' in '../system-config-printer-udev_1.5.18-3_arm64.deb'. dpkg-deb: building package 'python3-cupshelpers' in '../python3-cupshelpers_1.5.18-3_all.deb'. -dpkg-deb: building package 'system-config-printer-udev-dbgsym' in '../system-config-printer-udev-dbgsym_1.5.18-3_arm64.deb'. dpkg-genbuildinfo --build=binary -O../system-config-printer_1.5.18-3_arm64.buildinfo dpkg-genchanges --build=binary -O../system-config-printer_1.5.18-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -1398,12 +1434,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/3494775/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/2095298 and its subdirectories -I: Current time: Mon Nov 25 03:43:03 -12 2024 -I: pbuilder-time-stamp: 1732549383 +I: removing directory /srv/workspace/pbuilder/3494775 and its subdirectories +I: Current time: Mon Dec 29 12:06:54 +14 2025 +I: pbuilder-time-stamp: 1766959614 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/system-config-printer_1.5.18-3.diff: 83.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/system-config-printer_1.5.18-3.diff.gz b2/build.log: 83.6% -- replaced with stdout Compressing the 1st log... b1/build.log: 84.0% -- replaced with stdout Mon Nov 25 15:43:57 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_system-config-printer_trixie_arm64_1732549437 + touch /var/log/reproducible-builds/diffoscope_stamp_system-config-printer_trixie_arm64_1732549437 + RESULT=0 + systemd-run '--description=diffoscope on system-config-printer/1.5.18-3 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_18-69379 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww --run-session -c jenkins-reproducible-trixie-diffoscope-85be0062-3689-49fa-819a-219419fbac1f -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/dbd-tmp-gO4imaY ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/system-config-printer_1.5.18-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/system-config-printer_1.5.18-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/system-config-printer_1.5.18-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1/system-config-printer_1.5.18-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2/system-config-printer_1.5.18-3_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_18-69379.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/system-config-printer_1.5.18-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/system-config-printer_1.5.18-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/system-config-printer_1.5.18-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b1/system-config-printer_1.5.18-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.RqGEOjww/b2/system-config-printer_1.5.18-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.378s) 0.378s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.030s) 0.030s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 702ms CPU time consumed: 699ms _ __ _ ___ _ _ ___| |_ ___ _ __ ___ ___ ___ _ __ / _(_) __ _ _ __ / __| | | / __| __/ _ \ '_ ` _ \ _____ / __/ _ \| '_ \| |_| |/ _` |_____| '_ \ \__ \ |_| \__ \ || __/ | | | | |_____| (_| (_) | | | | _| | (_| |_____| |_) | |___/\__, |___/\__\___|_| |_| |_| \___\___/|_| |_|_| |_|\__, | | .__/ |___/ |___/ |_| _ _ _ __(_)_ __ | |_ ___ _ __ | '__| | '_ \| __/ _ \ '__| | | | | | | | || __/ | |_| |_|_| |_|\__\___|_| Mon Nov 25 15:43:58 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Mon Nov 25 15:43:58 UTC 2024 I: system-config-printer from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-25 15:43:59] INFO: Starting at 2024-11-25 15:43:59.267894 [2024-11-25 15:43:59] INFO: Generating the pages of 1 package(s) [2024-11-25 15:43:59] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/system-config-printer didn't produce a buildlog, even though it has been built. [2024-11-25 15:43:59] INFO: Finished at 2024-11-25 15:43:59.994829, took: 0:00:00.726943 Mon Nov 25 15:44:00 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/system-config-printer.html Mon Nov 25 15:44:00 UTC 2024 I: Submitting .buildinfo files to external archives: Mon Nov 25 15:44:00 UTC 2024 I: Submitting 12K b1/system-config-printer_1.5.18-3_arm64.buildinfo.asc https://buildinfo.debian.net/e6d77969cd09c6ce7bb3b184fcab091f11681a99/system-config-printer_1.5.18-3_all Mon Nov 25 15:44:01 UTC 2024 I: Submitting 12K b2/system-config-printer_1.5.18-3_arm64.buildinfo.asc https://buildinfo.debian.net/0a09916ea6cb4b20083a8c83a736f8987fc273d0/system-config-printer_1.5.18-3_all Mon Nov 25 15:44:02 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Nov 25 15:44:02 UTC 2024 I: Done submitting .buildinfo files. Mon Nov 25 15:44:02 UTC 2024 I: Removing signed system-config-printer_1.5.18-3_arm64.buildinfo.asc files: removed './b1/system-config-printer_1.5.18-3_arm64.buildinfo.asc' removed './b2/system-config-printer_1.5.18-3_arm64.buildinfo.asc' 1732549442 arm64 trixie system-config-printer Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/system-config-printer_1.5.18-3.rbuild.log: 82.0% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/system-config-printer_1.5.18-3.rbuild.log.gz [2024-11-25 15:44:02] INFO: Starting at 2024-11-25 15:44:02.714955 [2024-11-25 15:44:02] INFO: Generating the pages of 1 package(s) [2024-11-25 15:44:03] INFO: Finished at 2024-11-25 15:44:03.381793, took: 0:00:00.666846 All cleanup done. Mon Nov 25 15:44:03 UTC 2024 - total duration: 0h 1m 54s. Mon Nov 25 15:44:03 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-QfpXME0k, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 59.353s CPU time consumed: 8.121s