Running as unit: rb-build-arm64_21-49371.service ==================================================================================== Mon Jan 20 09:19:16 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_21) on jenkins, called using "codethink03-arm64 codethink02-arm64" as arguments. Mon Jan 20 09:19:16 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-AQEsefFu" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Jan 20 09:19:16 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Mon Jan 20 09:19:16 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-Vlj0no' Mon Jan 20 09:19:16 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Mon Jan 20 09:19:16 UTC 2025 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-jpQ6Gf' ok, let's check if faifa is building anywhere yet… ok, faifa is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of faifa in trixie on arm64 on jenkins now. 1st build will be done on codethink03-arm64.debian.net. 2nd build will be done on codethink02-arm64.debian.net. ============================================================================= Mon Jan 20 09:19:28 UTC 2025 I: starting to build faifa/trixie/arm64 on jenkins on '2025-01-20 09:19' Mon Jan 20 09:19:28 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_21/49371/console.log 1737364768 arm64 trixie faifa Mon Jan 20 09:19:28 UTC 2025 I: Downloading source for trixie/faifa=0.2~svn82-3.1 --2025-01-20 09:19:28-- http://deb.debian.org/debian/pool/main/f/faifa/faifa_0.2%7esvn82-3.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2032 (2.0K) [text/prs.lines.tag] Saving to: ‘faifa_0.2~svn82-3.1.dsc’ 0K . 100% 306M=0s 2025-01-20 09:19:28 (306 MB/s) - ‘faifa_0.2~svn82-3.1.dsc’ saved [2032/2032] --2025-01-20 09:19:28-- http://deb.debian.org/debian/pool/main/f/faifa/faifa_0.2%7esvn82-3.1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2032 (2.0K) [text/prs.lines.tag] Saving to: ‘faifa_0.2~svn82-3.1.dsc’ 0K . 100% 306M=0s 2025-01-20 09:19:28 (306 MB/s) - ‘faifa_0.2~svn82-3.1.dsc’ saved [2032/2032] Mon Jan 20 09:19:29 UTC 2025 I: faifa_0.2~svn82-3.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: faifa Binary: faifa, libfaifa-dev, libfaifa0t64 Architecture: any Version: 0.2~svn82-3.1 Maintainer: Debian QA Group Homepage: https://dev.open-plc.org/ Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/debian/faifa Vcs-Git: https://salsa.debian.org/debian/faifa.git Build-Depends: dpkg-dev (>= 1.22.5), debhelper-compat (= 12), autoconf, libpcap0.8-dev, libssl-dev (>= 0.9.7) Package-List: faifa deb net optional arch=any libfaifa-dev deb libdevel optional arch=any libfaifa0t64 deb libs optional arch=any Checksums-Sha1: f09a7b4160b81964a99ef3e689d63bd26ac6f26f 45500 faifa_0.2~svn82.orig.tar.gz e7322592bf5c89ab481e5114b2ebe9b1fa4936b9 4212 faifa_0.2~svn82-3.1.debian.tar.xz Checksums-Sha256: 10a6c6b2701089652919b5aad7bc78e7b1623273036f30f2e24ea2d3bb253d83 45500 faifa_0.2~svn82.orig.tar.gz efdcbc2376e4b3e6c4cb6bf47d98237a7f43dbe7a739c3284088ebb436fbd6e4 4212 faifa_0.2~svn82-3.1.debian.tar.xz Files: 04ddf62651a8a464767b6052edd2bb10 45500 faifa_0.2~svn82.orig.tar.gz 08a5511d85bd60cf0ff8fe96f23f28fd 4212 faifa_0.2~svn82-3.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJIBAEBCAAyFiEEiiBE+E9xaoW3f/djEd9ClMyjmJMFAmXerIkUHG13aHVkc29u QGRlYmlhbi5vcmcACgkQEd9ClMyjmJPCwhAAwnKX5LrqkjF4wWMPEdadLGATJC+o 4T9R5kOMyjcXJcXq0gmXAd92IzC4SGqw5d6qrcdbJKT0gvgwr2CgIme0h8I9Tm1P 6DeHzL+c/1KR8EuEkTx12y/gitISc1/uUdGOUKddMNCQz50/3/e/TNS5mbw+aOA0 4CzIVqWT1X8LKaCHKQ+Q/AkleYwePwoOLAkXj6YfzT7IGkiTzLdDCxLtaCSdHHfn +v5UGqTcM/W+wtbl+189Qe1ezdSXccJPnr2nTYqI9dUNtnthn294GxfXQk/i7Tgx aV9H1PSMIz3fjBGLjwVxlZcMGHUwdkSQAMR8YLIHsbPsj5CbBSRQamEzpX/aFg4s 7A0xoiQ19a096VM//MXaLhM/pTlfWT4xKqt/HWPqTF5BXdC2EJoSRZg4QRLkrwws SxvvkO7XNSOQIBoHWxrbOuVgQ5Z3CpIz8dYLB5BduTLpP5632LIBZ4bgb4qZPQpm g8JMfANUcaGe4kmHsTZud/xZNUDmRGX3k/Xzi1fP6EJDBLXrmS5Hj1kzIpbk+BOI OUwo+FEhYBgMY7T0ZaI7/kUJG/JhQ0RhXRrI/+6ueGUsM5hICmCVhBQOZw/EpVFn uPymNQN8qcO4c0nQNyD+SyCgxfheYdPQqxAA6k0/KZkEvkDtq/DG9EeK+k3Ni2wp u7xUYMkOO7j6Ry0= =/YwX -----END PGP SIGNATURE----- Mon Jan 20 09:19:29 UTC 2025 I: Checking whether the package is not for us Mon Jan 20 09:19:29 UTC 2025 I: Starting 1st build on remote node codethink03-arm64.debian.net. Mon Jan 20 09:19:29 UTC 2025 I: Preparing to do remote build '1' on codethink03-arm64.debian.net. Mon Jan 20 09:19:29 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Mon Jan 20 09:19:29 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-IKbaCm' ==================================================================================== Sun Feb 22 15:42:29 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "1 faifa trixie /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA 0.2~svn82-3.1" as arguments. Sun Feb 22 15:42:29 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-UVjS1NEh" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sun Feb 22 15:42:29 UTC 2026 I: Downloading source for trixie/faifa=0.2~svn82-3.1 Reading package lists... NOTICE: 'faifa' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/faifa.git Please use: git clone https://salsa.debian.org/debian/faifa.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 51.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (dsc) [2032 B] Get:2 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (tar) [45.5 kB] Get:3 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (diff) [4212 B] Fetched 51.7 kB in 0s (3417 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'faifa' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/faifa.git Please use: git clone https://salsa.debian.org/debian/faifa.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 51.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (dsc) [2032 B] Get:2 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (tar) [45.5 kB] Get:3 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (diff) [4212 B] Fetched 51.7 kB in 0s (3417 kB/s) Download complete and in download only mode ============================================================================= Building faifa in trixie on arm64 on codethink03-arm64 now. Date: Sun Feb 22 15:42:29 GMT 2026 Date UTC: Sun Feb 22 15:42:29 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Sun Feb 22 03:42:30 -12 2026 I: pbuilder-time-stamp: 1771774950 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [faifa_0.2~svn82-3.1.dsc] I: copying [./faifa_0.2~svn82.orig.tar.gz] I: copying [./faifa_0.2~svn82-3.1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./faifa_0.2~svn82-3.1.dsc: unsupported subcommand dpkg-source: info: extracting faifa in faifa-0.2~svn82 dpkg-source: info: unpacking faifa_0.2~svn82.orig.tar.gz dpkg-source: info: unpacking faifa_0.2~svn82-3.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1061957/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='63b7de74d7684604a8b0d3be8b7fe441' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1061957' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_g3y6 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1 --logfile b1/build.log faifa_0.2~svn82-3.1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-30-cloud-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1061957/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: dpkg-dev (>= 1.22.5), debhelper-compat (= 12), autoconf, libpcap0.8-dev, libssl-dev (>= 0.9.7) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19970 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. pbuilder-satisfydepends-dummy depends on libpcap0.8-dev; however: Package libpcap0.8-dev is not installed. pbuilder-satisfydepends-dummy depends on libssl-dev (>= 0.9.7); however: Package libssl-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdbus-1-3{a} libdbus-1-dev{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpcap0.8-dev{a} libpcap0.8t64{a} libpipeline1{a} libpkgconf3{a} libssl-dev{a} libsystemd-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} sgml-base{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 25.5 MB of archives. After unpacking 107 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sgml-base all 1.31 [15.4 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-4 [198 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.4-1 [91.6 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-5 [284 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-4 [723 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.23 [90.6 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-2 [539 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-1 [449 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-6 [9239 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-4 [1532 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.23 [919 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.16.0-1 [168 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsystemd-dev arm64 257.2-1 [1392 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 xml-core all 0.19 [20.1 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 libdbus-1-dev arm64 1.16.0-1 [215 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 libpcap0.8t64 arm64 1.10.5-1 [160 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libpcap0.8-dev arm64 1.10.5-1 [274 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libssl-dev arm64 3.4.0-2 [3234 kB] Fetched 25.5 MB in 0s (81.5 MB/s) Preconfiguring packages ... Selecting previously unselected package sgml-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19970 files and directories currently installed.) Preparing to unpack .../00-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-4_arm64.deb ... Unpacking gettext-base (0.22.5-4) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.4-1_arm64.deb ... Unpacking bsdextrautils (2.40.4-1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../09-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-5_arm64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-4_all.deb ... Unpacking autopoint (0.22.5-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-2_all.deb ... Unpacking libtool (2.5.4-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../22-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../24-libunistring5_1.3-1_arm64.deb ... Unpacking libunistring5:arm64 (1.3-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../25-libicu72_72.1-6_arm64.deb ... Unpacking libicu72:arm64 (72.1-6) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.22.5-4_arm64.deb ... Unpacking gettext (0.22.5-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../31-libdbus-1-3_1.16.0-1_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.16.0-1) ... Selecting previously unselected package libsystemd-dev:arm64. Preparing to unpack .../32-libsystemd-dev_257.2-1_arm64.deb ... Unpacking libsystemd-dev:arm64 (257.2-1) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../33-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../34-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../35-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package xml-core. Preparing to unpack .../36-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package libdbus-1-dev:arm64. Preparing to unpack .../37-libdbus-1-dev_1.16.0-1_arm64.deb ... Unpacking libdbus-1-dev:arm64 (1.16.0-1) ... Selecting previously unselected package libpcap0.8t64:arm64. Preparing to unpack .../38-libpcap0.8t64_1.10.5-1_arm64.deb ... Unpacking libpcap0.8t64:arm64 (1.10.5-1) ... Selecting previously unselected package libpcap0.8-dev:arm64. Preparing to unpack .../39-libpcap0.8-dev_1.10.5-1_arm64.deb ... Unpacking libpcap0.8-dev:arm64 (1.10.5-1) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../40-libssl-dev_3.4.0-2_arm64.deb ... Unpacking libssl-dev:arm64 (3.4.0-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-6) ... Setting up bsdextrautils (2.40.4-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-4) ... Setting up m4 (1.4.19-5) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libdbus-1-3:arm64 (1.16.0-1) ... Setting up libunistring5:arm64 (1.3-1) ... Setting up libssl-dev:arm64 (3.4.0-2) ... Setting up autopoint (0.22.5-4) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libpcap0.8t64:arm64 (1.10.5-1) ... Setting up sgml-base (1.31) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libsystemd-dev:arm64 (257.2-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-4) ... Setting up libtool (2.5.4-2) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-7) ... Setting up xml-core (0.19) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.23) ... Processing triggers for libc-bin (2.40-5) ... Processing triggers for sgml-base (1.31) ... Setting up libdbus-1-dev:arm64 (1.16.0-1) ... Setting up libpcap0.8-dev:arm64 (1.10.5-1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/faifa-0.2~svn82/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../faifa_0.2~svn82-3.1_source.changes dpkg-buildpackage: info: source package faifa dpkg-buildpackage: info: source version 0.2~svn82-3.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Michael Hudson-Doyle dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean --buildsystem=autoconf dh_auto_clean -O--buildsystem=autoconf dh_autoreconf_clean -O--buildsystem=autoconf dh_clean -O--buildsystem=autoconf debian/rules build dh build --buildsystem=autoconf dh_update_autotools_config -O--buildsystem=autoconf dh_autoreconf -O--buildsystem=autoconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:8: warning: The macro 'AC_TRY_LINK' is obsolete. configure.in:8: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... aclocal.m4:6: PA_ADD_CFLAGS is expanded from... configure.in:8: the top level configure.in:48: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:48: the top level configure.in:49: warning: AC_OUTPUT should be used without arguments. configure.in:49: You should run autoupdate. autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' ./autogen.sh + autoheader autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' + autoconf configure.in:8: warning: The macro 'AC_TRY_LINK' is obsolete. configure.in:8: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... aclocal.m4:6: PA_ADD_CFLAGS is expanded from... configure.in:8: the top level configure.in:48: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:48: the top level configure.in:49: warning: AC_OUTPUT should be used without arguments. configure.in:49: You should run autoupdate. + rm -rf autom4te.cache dh_auto_configure ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking if gcc accepts -Wall... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/types.h... (cached) yes checking for arpa/inet.h... yes checking for errno.h... yes checking for stdarg.h... yes checking for string.h... (cached) yes checking for net/if.h... yes checking for pthread.h... yes checking for pcap.h... yes checking for openssl/sha.h... yes checking for pthread_create in -lpthread... yes checking for pthread_join in -lpthread... yes checking for pcap_lookupdev in -lpcap... yes checking for pcap_datalink in -lpcap... yes checking for pcap_next_ex in -lpcap... yes checking for pcap_sendpacket in -lpcap... yes checking for pcap_close in -lpcap... yes checking for SHA256_Init in -lcrypto... yes checking for SHA256_Update in -lcrypto... yes checking for SHA256_Final in -lcrypto... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h sed 's/@DEB_HOST_MULTIARCH@/aarch64-linux-gnu/g' \ debian/libfaifa-dev.links.in > debian/libfaifa-dev.links sed 's/@DEB_HOST_MULTIARCH@/aarch64-linux-gnu/g' \ debian/libfaifa-dev.install.in > debian/libfaifa-dev.install make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' SVN_REV=82 STRIP=strip /usr/bin/make make[2]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c main.c gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c faifa.c faifa.c: In function 'faifa_open': faifa.c:110:9: warning: 'pcap_lookupdev' is deprecated: use 'pcap_findalldevs' and use the first device [-Wdeprecated-declarations] 110 | if (!pcap_lookupdev(pcap_errbuf)) { | ^~ In file included from /usr/include/pcap.h:43, from faifa_priv.h:43, from faifa.c:52: /usr/include/pcap/pcap.h:444:18: note: declared here 444 | PCAP_API char *pcap_lookupdev(char *); | ^~~~~~~~~~~~~~ faifa.c:180:9: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] 180 | strncpy(faifa->ifname, name, sizeof(faifa->ifname)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c frame.c frame.c: In function 'hpav_dump_cm_get_key_request': frame.c:1668:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1668 | if (mm->req_key_type == HASH_KEY) | ^~ frame.c:1669:56: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 1669 | faifa_printf(out_stream, "Hash key: ");dump_hex(mm->hash_key, len, "");faifa_printf(out_stream, "\n"); | ^~~~~~~~ frame.c: In function 'do_receive_frame': frame.c:2533:31: warning: taking address of packed member of 'struct ether_header' may result in an unaligned pointer value [-Waddress-of-packed-member] 2533 | u_int16_t *eth_type = &(eth_header->ether_type); | ^~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c crypto.c crypto.c: In function 'hash_hpav': crypto.c:101:9: warning: 'SHA256_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 101 | SHA256_Init(&context); | ^~~~~~~~~~~ In file included from crypto.c:40: /usr/include/openssl/sha.h:73:27: note: declared here 73 | OSSL_DEPRECATEDIN_3_0 int SHA256_Init(SHA256_CTX *c); | ^~~~~~~~~~~ crypto.c:105:9: warning: 'SHA256_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 105 | SHA256_Update(&context, secret.value, secret.len); | ^~~~~~~~~~~~~ /usr/include/openssl/sha.h:74:27: note: declared here 74 | OSSL_DEPRECATEDIN_3_0 int SHA256_Update(SHA256_CTX *c, | ^~~~~~~~~~~~~ crypto.c:106:9: warning: 'SHA256_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 106 | SHA256_Final(hash_value, &context); | ^~~~~~~~~~~~ /usr/include/openssl/sha.h:76:27: note: declared here 76 | OSSL_DEPRECATEDIN_3_0 int SHA256_Final(unsigned char *md, SHA256_CTX *c); | ^~~~~~~~~~~~ crypto.c:111:17: warning: 'SHA256_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 111 | SHA256_Init(&context); | ^~~~~~~~~~~ /usr/include/openssl/sha.h:73:27: note: declared here 73 | OSSL_DEPRECATEDIN_3_0 int SHA256_Init(SHA256_CTX *c); | ^~~~~~~~~~~ crypto.c:112:17: warning: 'SHA256_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 112 | SHA256_Update(&context, hash_value, HASH_SIZ); | ^~~~~~~~~~~~~ /usr/include/openssl/sha.h:74:27: note: declared here 74 | OSSL_DEPRECATEDIN_3_0 int SHA256_Update(SHA256_CTX *c, | ^~~~~~~~~~~~~ crypto.c:113:17: warning: 'SHA256_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 113 | SHA256_Final(hash_value, &context); | ^~~~~~~~~~~~ /usr/include/openssl/sha.h:76:27: note: declared here 76 | OSSL_DEPRECATEDIN_3_0 int SHA256_Final(unsigned char *md, SHA256_CTX *c); | ^~~~~~~~~~~~ gcc -shared -Wl,-soname,libfaifa.so.0 -o libfaifa.so.0 faifa.o frame.o crypto.o -Wl,-z,relro -lpcap -lpthread -lcrypto gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -o faifa main.o -Wl,-z,relro -lpcap -lpthread -lcrypto libfaifa.so.0 ar rcs libfaifa.a faifa.o frame.o crypto.o make[2]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_auto_test -O--buildsystem=autoconf create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --buildsystem=autoconf dh_testroot -O--buildsystem=autoconf dh_prep -O--buildsystem=autoconf dh_auto_install -O--buildsystem=autoconf make -j12 install DESTDIR=/build/reproducible-path/faifa-0.2\~svn82/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' rm -f faifa.8.gz gzip -c -q -9v faifa.8 > faifa.8.gz strip faifa strip libfaifa.so.0 faifa.8: 62.2% -- replaced with stdout /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -m0644 faifa.8.gz /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin /usr/bin/install -c -m0755 faifa /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/aarch64-linux-gnu /usr/bin/install -c -m0644 libfaifa.so.0 /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/aarch64-linux-gnu /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/include/faifa cp faifa.h faifa_compat.h faifa_priv.h homeplug.h homeplug_av.h crypto.h device.h endian.h /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/include/faifa make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_install -O--buildsystem=autoconf dh_installdocs -O--buildsystem=autoconf dh_installchangelogs -O--buildsystem=autoconf dh_installman -O--buildsystem=autoconf dh_installinit -O--buildsystem=autoconf dh_installsystemduser -O--buildsystem=autoconf dh_lintian -O--buildsystem=autoconf dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -O--buildsystem=autoconf dwz: debian/faifa/usr/bin/faifa: .debug_info section not present dwz: debian/libfaifa0t64/usr/lib/aarch64-linux-gnu/libfaifa.so.0: .debug_info section not present dh_strip -O--buildsystem=autoconf dh_makeshlibs -O--buildsystem=autoconf debian/rules override_dh_shlibdeps make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' dh_shlibdeps -Llibfaifa -l/build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/faifa -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_installdeb -O--buildsystem=autoconf dh_gencontrol -O--buildsystem=autoconf dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf dpkg-deb: building package 'faifa' in '../faifa_0.2~svn82-3.1_arm64.deb'. dpkg-deb: building package 'libfaifa0t64' in '../libfaifa0t64_0.2~svn82-3.1_arm64.deb'. dpkg-deb: building package 'libfaifa-dev' in '../libfaifa-dev_0.2~svn82-3.1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../faifa_0.2~svn82-3.1_arm64.buildinfo dpkg-genchanges --build=binary -O../faifa_0.2~svn82-3.1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1061957 and its subdirectories I: Current time: Sun Feb 22 03:43:39 -12 2026 I: pbuilder-time-stamp: 1771775019 Sun Feb 22 15:43:39 UTC 2026 I: Signing ./b1/faifa_0.2~svn82-3.1_arm64.buildinfo as faifa_0.2~svn82-3.1_arm64.buildinfo.asc Sun Feb 22 15:43:39 UTC 2026 I: Signed ./b1/faifa_0.2~svn82-3.1_arm64.buildinfo as ./b1/faifa_0.2~svn82-3.1_arm64.buildinfo.asc Sun Feb 22 15:43:39 UTC 2026 - build #1 for faifa/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Sun Feb 22 15:43:39 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-UVjS1NEh, removing. /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Jan 20 09:20 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jan 20 09:19 b2 -rw-r--r-- 1 jenkins jenkins 2032 Feb 28 2024 faifa_0.2~svn82-3.1.dsc -rw------- 1 jenkins jenkins 3156 Jan 20 09:19 rbuildlog.Vv8msYD /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1: total 136 -rw-r--r-- 1 jenkins jenkins 34323 Jan 20 09:20 build.log -rw-r--r-- 1 jenkins jenkins 4212 Jan 20 09:20 faifa_0.2~svn82-3.1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2032 Jan 20 09:20 faifa_0.2~svn82-3.1.dsc -rw-r--r-- 1 jenkins jenkins 5557 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6439 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1858 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.changes -rw-r--r-- 1 jenkins jenkins 8192 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1262 Jan 20 09:20 faifa_0.2~svn82-3.1_source.changes -rw-r--r-- 1 jenkins jenkins 31380 Jan 20 09:20 libfaifa-dev_0.2~svn82-3.1_arm64.deb -rw-r--r-- 1 jenkins jenkins 22892 Jan 20 09:20 libfaifa0t64_0.2~svn82-3.1_arm64.deb /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2: total 0 Mon Jan 20 09:20:41 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Feb 22 03:42:30 -12 2026 I: pbuilder-time-stamp: 1771774950 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [faifa_0.2~svn82-3.1.dsc] I: copying [./faifa_0.2~svn82.orig.tar.gz] I: copying [./faifa_0.2~svn82-3.1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./faifa_0.2~svn82-3.1.dsc: unsupported subcommand dpkg-source: info: extracting faifa in faifa-0.2~svn82 dpkg-source: info: unpacking faifa_0.2~svn82.orig.tar.gz dpkg-source: info: unpacking faifa_0.2~svn82-3.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1061957/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='63b7de74d7684604a8b0d3be8b7fe441' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1061957' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_g3y6 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1 --logfile b1/build.log faifa_0.2~svn82-3.1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink03-arm64 6.1.0-30-cloud-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1061957/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: dpkg-dev (>= 1.22.5), debhelper-compat (= 12), autoconf, libpcap0.8-dev, libssl-dev (>= 0.9.7) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19970 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. pbuilder-satisfydepends-dummy depends on libpcap0.8-dev; however: Package libpcap0.8-dev is not installed. pbuilder-satisfydepends-dummy depends on libssl-dev (>= 0.9.7); however: Package libssl-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdbus-1-3{a} libdbus-1-dev{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpcap0.8-dev{a} libpcap0.8t64{a} libpipeline1{a} libpkgconf3{a} libssl-dev{a} libsystemd-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} sgml-base{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 25.5 MB of archives. After unpacking 107 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sgml-base all 1.31 [15.4 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-4 [198 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.4-1 [91.6 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-5 [284 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-4 [723 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.23 [90.6 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-2 [539 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-1 [449 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-6 [9239 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-4 [1532 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.23 [919 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.16.0-1 [168 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsystemd-dev arm64 257.2-1 [1392 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 xml-core all 0.19 [20.1 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 libdbus-1-dev arm64 1.16.0-1 [215 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 libpcap0.8t64 arm64 1.10.5-1 [160 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libpcap0.8-dev arm64 1.10.5-1 [274 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libssl-dev arm64 3.4.0-2 [3234 kB] Fetched 25.5 MB in 0s (81.5 MB/s) Preconfiguring packages ... Selecting previously unselected package sgml-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19970 files and directories currently installed.) Preparing to unpack .../00-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-4_arm64.deb ... Unpacking gettext-base (0.22.5-4) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.4-1_arm64.deb ... Unpacking bsdextrautils (2.40.4-1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../09-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-5_arm64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-4_all.deb ... Unpacking autopoint (0.22.5-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-2_all.deb ... Unpacking libtool (2.5.4-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../22-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../24-libunistring5_1.3-1_arm64.deb ... Unpacking libunistring5:arm64 (1.3-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../25-libicu72_72.1-6_arm64.deb ... Unpacking libicu72:arm64 (72.1-6) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.22.5-4_arm64.deb ... Unpacking gettext (0.22.5-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../31-libdbus-1-3_1.16.0-1_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.16.0-1) ... Selecting previously unselected package libsystemd-dev:arm64. Preparing to unpack .../32-libsystemd-dev_257.2-1_arm64.deb ... Unpacking libsystemd-dev:arm64 (257.2-1) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../33-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../34-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../35-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package xml-core. Preparing to unpack .../36-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package libdbus-1-dev:arm64. Preparing to unpack .../37-libdbus-1-dev_1.16.0-1_arm64.deb ... Unpacking libdbus-1-dev:arm64 (1.16.0-1) ... Selecting previously unselected package libpcap0.8t64:arm64. Preparing to unpack .../38-libpcap0.8t64_1.10.5-1_arm64.deb ... Unpacking libpcap0.8t64:arm64 (1.10.5-1) ... Selecting previously unselected package libpcap0.8-dev:arm64. Preparing to unpack .../39-libpcap0.8-dev_1.10.5-1_arm64.deb ... Unpacking libpcap0.8-dev:arm64 (1.10.5-1) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../40-libssl-dev_3.4.0-2_arm64.deb ... Unpacking libssl-dev:arm64 (3.4.0-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-6) ... Setting up bsdextrautils (2.40.4-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-4) ... Setting up m4 (1.4.19-5) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libdbus-1-3:arm64 (1.16.0-1) ... Setting up libunistring5:arm64 (1.3-1) ... Setting up libssl-dev:arm64 (3.4.0-2) ... Setting up autopoint (0.22.5-4) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libpcap0.8t64:arm64 (1.10.5-1) ... Setting up sgml-base (1.31) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libsystemd-dev:arm64 (257.2-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-4) ... Setting up libtool (2.5.4-2) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-7) ... Setting up xml-core (0.19) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.23) ... Processing triggers for libc-bin (2.40-5) ... Processing triggers for sgml-base (1.31) ... Setting up libdbus-1-dev:arm64 (1.16.0-1) ... Setting up libpcap0.8-dev:arm64 (1.10.5-1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/faifa-0.2~svn82/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../faifa_0.2~svn82-3.1_source.changes dpkg-buildpackage: info: source package faifa dpkg-buildpackage: info: source version 0.2~svn82-3.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Michael Hudson-Doyle dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean --buildsystem=autoconf dh_auto_clean -O--buildsystem=autoconf dh_autoreconf_clean -O--buildsystem=autoconf dh_clean -O--buildsystem=autoconf debian/rules build dh build --buildsystem=autoconf dh_update_autotools_config -O--buildsystem=autoconf dh_autoreconf -O--buildsystem=autoconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:8: warning: The macro 'AC_TRY_LINK' is obsolete. configure.in:8: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... aclocal.m4:6: PA_ADD_CFLAGS is expanded from... configure.in:8: the top level configure.in:48: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:48: the top level configure.in:49: warning: AC_OUTPUT should be used without arguments. configure.in:49: You should run autoupdate. autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' ./autogen.sh + autoheader autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' + autoconf configure.in:8: warning: The macro 'AC_TRY_LINK' is obsolete. configure.in:8: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... aclocal.m4:6: PA_ADD_CFLAGS is expanded from... configure.in:8: the top level configure.in:48: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:48: the top level configure.in:49: warning: AC_OUTPUT should be used without arguments. configure.in:49: You should run autoupdate. + rm -rf autom4te.cache dh_auto_configure ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking if gcc accepts -Wall... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/types.h... (cached) yes checking for arpa/inet.h... yes checking for errno.h... yes checking for stdarg.h... yes checking for string.h... (cached) yes checking for net/if.h... yes checking for pthread.h... yes checking for pcap.h... yes checking for openssl/sha.h... yes checking for pthread_create in -lpthread... yes checking for pthread_join in -lpthread... yes checking for pcap_lookupdev in -lpcap... yes checking for pcap_datalink in -lpcap... yes checking for pcap_next_ex in -lpcap... yes checking for pcap_sendpacket in -lpcap... yes checking for pcap_close in -lpcap... yes checking for SHA256_Init in -lcrypto... yes checking for SHA256_Update in -lcrypto... yes checking for SHA256_Final in -lcrypto... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h sed 's/@DEB_HOST_MULTIARCH@/aarch64-linux-gnu/g' \ debian/libfaifa-dev.links.in > debian/libfaifa-dev.links sed 's/@DEB_HOST_MULTIARCH@/aarch64-linux-gnu/g' \ debian/libfaifa-dev.install.in > debian/libfaifa-dev.install make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' SVN_REV=82 STRIP=strip /usr/bin/make make[2]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c main.c gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c faifa.c faifa.c: In function 'faifa_open': faifa.c:110:9: warning: 'pcap_lookupdev' is deprecated: use 'pcap_findalldevs' and use the first device [-Wdeprecated-declarations] 110 | if (!pcap_lookupdev(pcap_errbuf)) { | ^~ In file included from /usr/include/pcap.h:43, from faifa_priv.h:43, from faifa.c:52: /usr/include/pcap/pcap.h:444:18: note: declared here 444 | PCAP_API char *pcap_lookupdev(char *); | ^~~~~~~~~~~~~~ faifa.c:180:9: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] 180 | strncpy(faifa->ifname, name, sizeof(faifa->ifname)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c frame.c frame.c: In function 'hpav_dump_cm_get_key_request': frame.c:1668:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1668 | if (mm->req_key_type == HASH_KEY) | ^~ frame.c:1669:56: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 1669 | faifa_printf(out_stream, "Hash key: ");dump_hex(mm->hash_key, len, "");faifa_printf(out_stream, "\n"); | ^~~~~~~~ frame.c: In function 'do_receive_frame': frame.c:2533:31: warning: taking address of packed member of 'struct ether_header' may result in an unaligned pointer value [-Waddress-of-packed-member] 2533 | u_int16_t *eth_type = &(eth_header->ether_type); | ^~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c crypto.c crypto.c: In function 'hash_hpav': crypto.c:101:9: warning: 'SHA256_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 101 | SHA256_Init(&context); | ^~~~~~~~~~~ In file included from crypto.c:40: /usr/include/openssl/sha.h:73:27: note: declared here 73 | OSSL_DEPRECATEDIN_3_0 int SHA256_Init(SHA256_CTX *c); | ^~~~~~~~~~~ crypto.c:105:9: warning: 'SHA256_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 105 | SHA256_Update(&context, secret.value, secret.len); | ^~~~~~~~~~~~~ /usr/include/openssl/sha.h:74:27: note: declared here 74 | OSSL_DEPRECATEDIN_3_0 int SHA256_Update(SHA256_CTX *c, | ^~~~~~~~~~~~~ crypto.c:106:9: warning: 'SHA256_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 106 | SHA256_Final(hash_value, &context); | ^~~~~~~~~~~~ /usr/include/openssl/sha.h:76:27: note: declared here 76 | OSSL_DEPRECATEDIN_3_0 int SHA256_Final(unsigned char *md, SHA256_CTX *c); | ^~~~~~~~~~~~ crypto.c:111:17: warning: 'SHA256_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 111 | SHA256_Init(&context); | ^~~~~~~~~~~ /usr/include/openssl/sha.h:73:27: note: declared here 73 | OSSL_DEPRECATEDIN_3_0 int SHA256_Init(SHA256_CTX *c); | ^~~~~~~~~~~ crypto.c:112:17: warning: 'SHA256_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 112 | SHA256_Update(&context, hash_value, HASH_SIZ); | ^~~~~~~~~~~~~ /usr/include/openssl/sha.h:74:27: note: declared here 74 | OSSL_DEPRECATEDIN_3_0 int SHA256_Update(SHA256_CTX *c, | ^~~~~~~~~~~~~ crypto.c:113:17: warning: 'SHA256_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 113 | SHA256_Final(hash_value, &context); | ^~~~~~~~~~~~ /usr/include/openssl/sha.h:76:27: note: declared here 76 | OSSL_DEPRECATEDIN_3_0 int SHA256_Final(unsigned char *md, SHA256_CTX *c); | ^~~~~~~~~~~~ gcc -shared -Wl,-soname,libfaifa.so.0 -o libfaifa.so.0 faifa.o frame.o crypto.o -Wl,-z,relro -lpcap -lpthread -lcrypto gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -o faifa main.o -Wl,-z,relro -lpcap -lpthread -lcrypto libfaifa.so.0 ar rcs libfaifa.a faifa.o frame.o crypto.o make[2]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_auto_test -O--buildsystem=autoconf create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --buildsystem=autoconf dh_testroot -O--buildsystem=autoconf dh_prep -O--buildsystem=autoconf dh_auto_install -O--buildsystem=autoconf make -j12 install DESTDIR=/build/reproducible-path/faifa-0.2\~svn82/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' rm -f faifa.8.gz gzip -c -q -9v faifa.8 > faifa.8.gz strip faifa strip libfaifa.so.0 faifa.8: 62.2% -- replaced with stdout /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -m0644 faifa.8.gz /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin /usr/bin/install -c -m0755 faifa /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/aarch64-linux-gnu /usr/bin/install -c -m0644 libfaifa.so.0 /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/aarch64-linux-gnu /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/include/faifa cp faifa.h faifa_compat.h faifa_priv.h homeplug.h homeplug_av.h crypto.h device.h endian.h /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/include/faifa make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_install -O--buildsystem=autoconf dh_installdocs -O--buildsystem=autoconf dh_installchangelogs -O--buildsystem=autoconf dh_installman -O--buildsystem=autoconf dh_installinit -O--buildsystem=autoconf dh_installsystemduser -O--buildsystem=autoconf dh_lintian -O--buildsystem=autoconf dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -O--buildsystem=autoconf dwz: debian/faifa/usr/bin/faifa: .debug_info section not present dwz: debian/libfaifa0t64/usr/lib/aarch64-linux-gnu/libfaifa.so.0: .debug_info section not present dh_strip -O--buildsystem=autoconf dh_makeshlibs -O--buildsystem=autoconf debian/rules override_dh_shlibdeps make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' dh_shlibdeps -Llibfaifa -l/build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/faifa -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_installdeb -O--buildsystem=autoconf dh_gencontrol -O--buildsystem=autoconf dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf dpkg-deb: building package 'faifa' in '../faifa_0.2~svn82-3.1_arm64.deb'. dpkg-deb: building package 'libfaifa0t64' in '../libfaifa0t64_0.2~svn82-3.1_arm64.deb'. dpkg-deb: building package 'libfaifa-dev' in '../libfaifa-dev_0.2~svn82-3.1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../faifa_0.2~svn82-3.1_arm64.buildinfo dpkg-genchanges --build=binary -O../faifa_0.2~svn82-3.1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1061957 and its subdirectories I: Current time: Sun Feb 22 03:43:39 -12 2026 I: pbuilder-time-stamp: 1771775019 Mon Jan 20 09:20:42 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink02-arm64.debian.net. Mon Jan 20 09:20:42 UTC 2025 I: Preparing to do remote build '2' on codethink02-arm64.debian.net. Mon Jan 20 09:20:42 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Mon Jan 20 09:20:42 UTC 2025 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-Q6D7vX' ==================================================================================== Mon Jan 20 09:20:43 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink02-arm64, called using "2 faifa trixie /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA 0.2~svn82-3.1" as arguments. Mon Jan 20 09:20:43 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-LoijkIPA" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Jan 20 09:20:43 UTC 2025 I: Downloading source for trixie/faifa=0.2~svn82-3.1 Reading package lists... NOTICE: 'faifa' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/faifa.git Please use: git clone https://salsa.debian.org/debian/faifa.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 51.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (dsc) [2032 B] Get:2 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (tar) [45.5 kB] Get:3 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (diff) [4212 B] Fetched 51.7 kB in 0s (4063 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'faifa' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/faifa.git Please use: git clone https://salsa.debian.org/debian/faifa.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 51.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (dsc) [2032 B] Get:2 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (tar) [45.5 kB] Get:3 http://deb.debian.org/debian trixie/main faifa 0.2~svn82-3.1 (diff) [4212 B] Fetched 51.7 kB in 0s (4063 kB/s) Download complete and in download only mode ============================================================================= Re-Building faifa in trixie on arm64 on codethink02-arm64 now. Date: Mon Jan 20 09:20:43 GMT 2025 Date UTC: Mon Jan 20 09:20:43 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_xKwr + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' faifa = debian-installer -o faifa = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' faifa = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_xKwr --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2 --logfile b2/build.log faifa_0.2~svn82-3.1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Jan 20 23:20:44 +14 2025 I: pbuilder-time-stamp: 1737364844 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [faifa_0.2~svn82-3.1.dsc] I: copying [./faifa_0.2~svn82.orig.tar.gz] I: copying [./faifa_0.2~svn82-3.1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./faifa_0.2~svn82-3.1.dsc: unsupported subcommand dpkg-source: info: extracting faifa in faifa-0.2~svn82 dpkg-source: info: unpacking faifa_0.2~svn82.orig.tar.gz dpkg-source: info: unpacking faifa_0.2~svn82-3.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D01_modify_environment starting debug: Running on codethink02-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Jan 20 09:20 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=dd553a13e9894cbb8b9c8ea761665404 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=4162577 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_xKwr --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2 --logfile b2/build.log faifa_0.2~svn82-3.1.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-30-cloud-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: dpkg-dev (>= 1.22.5), debhelper-compat (= 12), autoconf, libpcap0.8-dev, libssl-dev (>= 0.9.7) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19970 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. pbuilder-satisfydepends-dummy depends on libpcap0.8-dev; however: Package libpcap0.8-dev is not installed. pbuilder-satisfydepends-dummy depends on libssl-dev (>= 0.9.7); however: Package libssl-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdbus-1-3{a} libdbus-1-dev{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpcap0.8-dev{a} libpcap0.8t64{a} libpipeline1{a} libpkgconf3{a} libssl-dev{a} libsystemd-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} sgml-base{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 25.5 MB of archives. After unpacking 107 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sgml-base all 1.31 [15.4 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-4 [198 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.4-1 [91.6 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-5 [284 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-4 [723 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.23 [90.6 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-2 [539 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 22 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 23 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-1 [449 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-6 [9239 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-4 [1532 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.23 [919 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libdbus-1-3 arm64 1.16.0-1 [168 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libsystemd-dev arm64 257.2-1 [1392 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 35 http://deb.debian.org/debian trixie/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 36 http://deb.debian.org/debian trixie/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 37 http://deb.debian.org/debian trixie/main arm64 xml-core all 0.19 [20.1 kB] Get: 38 http://deb.debian.org/debian trixie/main arm64 libdbus-1-dev arm64 1.16.0-1 [215 kB] Get: 39 http://deb.debian.org/debian trixie/main arm64 libpcap0.8t64 arm64 1.10.5-1 [160 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libpcap0.8-dev arm64 1.10.5-1 [274 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libssl-dev arm64 3.4.0-2 [3234 kB] Fetched 25.5 MB in 0s (112 MB/s) Preconfiguring packages ... Selecting previously unselected package sgml-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19970 files and directories currently installed.) Preparing to unpack .../00-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-4_arm64.deb ... Unpacking gettext-base (0.22.5-4) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../06-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-7_arm64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.4-1_arm64.deb ... Unpacking bsdextrautils (2.40.4-1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../09-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-5_arm64.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-4_all.deb ... Unpacking autopoint (0.22.5-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-2_all.deb ... Unpacking libtool (2.5.4-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../22-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../24-libunistring5_1.3-1_arm64.deb ... Unpacking libunistring5:arm64 (1.3-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../25-libicu72_72.1-6_arm64.deb ... Unpacking libicu72:arm64 (72.1-6) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.22.5-4_arm64.deb ... Unpacking gettext (0.22.5-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../31-libdbus-1-3_1.16.0-1_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.16.0-1) ... Selecting previously unselected package libsystemd-dev:arm64. Preparing to unpack .../32-libsystemd-dev_257.2-1_arm64.deb ... Unpacking libsystemd-dev:arm64 (257.2-1) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../33-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../34-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../35-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package xml-core. Preparing to unpack .../36-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package libdbus-1-dev:arm64. Preparing to unpack .../37-libdbus-1-dev_1.16.0-1_arm64.deb ... Unpacking libdbus-1-dev:arm64 (1.16.0-1) ... Selecting previously unselected package libpcap0.8t64:arm64. Preparing to unpack .../38-libpcap0.8t64_1.10.5-1_arm64.deb ... Unpacking libpcap0.8t64:arm64 (1.10.5-1) ... Selecting previously unselected package libpcap0.8-dev:arm64. Preparing to unpack .../39-libpcap0.8-dev_1.10.5-1_arm64.deb ... Unpacking libpcap0.8-dev:arm64 (1.10.5-1) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../40-libssl-dev_3.4.0-2_arm64.deb ... Unpacking libssl-dev:arm64 (3.4.0-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-6) ... Setting up bsdextrautils (2.40.4-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-4) ... Setting up m4 (1.4.19-5) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libdbus-1-3:arm64 (1.16.0-1) ... Setting up libunistring5:arm64 (1.3-1) ... Setting up libssl-dev:arm64 (3.4.0-2) ... Setting up autopoint (0.22.5-4) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libpcap0.8t64:arm64 (1.10.5-1) ... Setting up sgml-base (1.31) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libsystemd-dev:arm64 (257.2-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-4) ... Setting up libtool (2.5.4-2) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-7) ... Setting up xml-core (0.19) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.23) ... Processing triggers for libc-bin (2.40-5) ... Processing triggers for sgml-base (1.31) ... Setting up libdbus-1-dev:arm64 (1.16.0-1) ... Setting up libpcap0.8-dev:arm64 (1.10.5-1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/faifa-0.2~svn82/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../faifa_0.2~svn82-3.1_source.changes dpkg-buildpackage: info: source package faifa dpkg-buildpackage: info: source version 0.2~svn82-3.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Michael Hudson-Doyle dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean --buildsystem=autoconf dh_auto_clean -O--buildsystem=autoconf dh_autoreconf_clean -O--buildsystem=autoconf dh_clean -O--buildsystem=autoconf debian/rules build dh build --buildsystem=autoconf dh_update_autotools_config -O--buildsystem=autoconf dh_autoreconf -O--buildsystem=autoconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:8: warning: The macro 'AC_TRY_LINK' is obsolete. configure.in:8: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... aclocal.m4:6: PA_ADD_CFLAGS is expanded from... configure.in:8: the top level configure.in:48: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:48: the top level configure.in:49: warning: AC_OUTPUT should be used without arguments. configure.in:49: You should run autoupdate. autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' ./autogen.sh + autoheader autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' + autoconf configure.in:8: warning: The macro 'AC_TRY_LINK' is obsolete. configure.in:8: You should run autoupdate. ./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... aclocal.m4:6: PA_ADD_CFLAGS is expanded from... configure.in:8: the top level configure.in:48: warning: The macro 'AC_CONFIG_HEADER' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:48: the top level configure.in:49: warning: AC_OUTPUT should be used without arguments. configure.in:49: You should run autoupdate. + rm -rf autom4te.cache dh_auto_configure ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking if gcc accepts -Wall... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/types.h... (cached) yes checking for arpa/inet.h... yes checking for errno.h... yes checking for stdarg.h... yes checking for string.h... (cached) yes checking for net/if.h... yes checking for pthread.h... yes checking for pcap.h... yes checking for openssl/sha.h... yes checking for pthread_create in -lpthread... yes checking for pthread_join in -lpthread... yes checking for pcap_lookupdev in -lpcap... yes checking for pcap_datalink in -lpcap... yes checking for pcap_next_ex in -lpcap... yes checking for pcap_sendpacket in -lpcap... yes checking for pcap_close in -lpcap... yes checking for SHA256_Init in -lcrypto... yes checking for SHA256_Update in -lcrypto... yes checking for SHA256_Final in -lcrypto... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h sed 's/@DEB_HOST_MULTIARCH@/aarch64-linux-gnu/g' \ debian/libfaifa-dev.links.in > debian/libfaifa-dev.links sed 's/@DEB_HOST_MULTIARCH@/aarch64-linux-gnu/g' \ debian/libfaifa-dev.install.in > debian/libfaifa-dev.install make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' debian/rules override_dh_auto_build make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' SVN_REV=82 STRIP=strip /usr/bin/make make[2]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c main.c gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c faifa.c faifa.c: In function 'faifa_open': faifa.c:110:9: warning: 'pcap_lookupdev' is deprecated: use 'pcap_findalldevs' and use the first device [-Wdeprecated-declarations] 110 | if (!pcap_lookupdev(pcap_errbuf)) { | ^~ In file included from /usr/include/pcap.h:43, from faifa_priv.h:43, from faifa.c:52: /usr/include/pcap/pcap.h:444:18: note: declared here 444 | PCAP_API char *pcap_lookupdev(char *); | ^~~~~~~~~~~~~~ faifa.c:180:9: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] 180 | strncpy(faifa->ifname, name, sizeof(faifa->ifname)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c frame.c frame.c: In function 'hpav_dump_cm_get_key_request': frame.c:1668:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1668 | if (mm->req_key_type == HASH_KEY) | ^~ frame.c:1669:56: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 1669 | faifa_printf(out_stream, "Hash key: ");dump_hex(mm->hash_key, len, "");faifa_printf(out_stream, "\n"); | ^~~~~~~~ frame.c: In function 'do_receive_frame': frame.c:2533:31: warning: taking address of packed member of 'struct ether_header' may result in an unaligned pointer value [-Waddress-of-packed-member] 2533 | u_int16_t *eth_type = &(eth_header->ether_type); | ^~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -c crypto.c crypto.c: In function 'hash_hpav': crypto.c:101:9: warning: 'SHA256_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 101 | SHA256_Init(&context); | ^~~~~~~~~~~ In file included from crypto.c:40: /usr/include/openssl/sha.h:73:27: note: declared here 73 | OSSL_DEPRECATEDIN_3_0 int SHA256_Init(SHA256_CTX *c); | ^~~~~~~~~~~ crypto.c:105:9: warning: 'SHA256_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 105 | SHA256_Update(&context, secret.value, secret.len); | ^~~~~~~~~~~~~ /usr/include/openssl/sha.h:74:27: note: declared here 74 | OSSL_DEPRECATEDIN_3_0 int SHA256_Update(SHA256_CTX *c, | ^~~~~~~~~~~~~ crypto.c:106:9: warning: 'SHA256_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 106 | SHA256_Final(hash_value, &context); | ^~~~~~~~~~~~ /usr/include/openssl/sha.h:76:27: note: declared here 76 | OSSL_DEPRECATEDIN_3_0 int SHA256_Final(unsigned char *md, SHA256_CTX *c); | ^~~~~~~~~~~~ crypto.c:111:17: warning: 'SHA256_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 111 | SHA256_Init(&context); | ^~~~~~~~~~~ /usr/include/openssl/sha.h:73:27: note: declared here 73 | OSSL_DEPRECATEDIN_3_0 int SHA256_Init(SHA256_CTX *c); | ^~~~~~~~~~~ crypto.c:112:17: warning: 'SHA256_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 112 | SHA256_Update(&context, hash_value, HASH_SIZ); | ^~~~~~~~~~~~~ /usr/include/openssl/sha.h:74:27: note: declared here 74 | OSSL_DEPRECATEDIN_3_0 int SHA256_Update(SHA256_CTX *c, | ^~~~~~~~~~~~~ crypto.c:113:17: warning: 'SHA256_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 113 | SHA256_Final(hash_value, &context); | ^~~~~~~~~~~~ /usr/include/openssl/sha.h:76:27: note: declared here 76 | OSSL_DEPRECATEDIN_3_0 int SHA256_Final(unsigned char *md, SHA256_CTX *c); | ^~~~~~~~~~~~ gcc -shared -Wl,-soname,libfaifa.so.0 -o libfaifa.so.0 faifa.o frame.o crypto.o -Wl,-z,relro -lpcap -lpthread -lcrypto gcc -DLINUX -DSVN_REV=82 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/faifa-0.2~svn82=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -Wno-unused-result -fPIC -o faifa main.o -Wl,-z,relro -lpcap -lpthread -lcrypto libfaifa.so.0 ar rcs libfaifa.a faifa.o frame.o crypto.o make[2]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_auto_test -O--buildsystem=autoconf create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --buildsystem=autoconf dh_testroot -O--buildsystem=autoconf dh_prep -O--buildsystem=autoconf dh_auto_install -O--buildsystem=autoconf make -j12 install DESTDIR=/build/reproducible-path/faifa-0.2\~svn82/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' rm -f faifa.8.gz gzip -c -q -9v faifa.8 > faifa.8.gz strip faifa faifa.8: 62.2% -- replaced with stdout strip libfaifa.so.0 /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -m0644 faifa.8.gz /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin /usr/bin/install -c -m0755 faifa /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/aarch64-linux-gnu /usr/bin/install -c -m0644 libfaifa.so.0 /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/aarch64-linux-gnu /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/include/faifa cp faifa.h faifa_compat.h faifa_priv.h homeplug.h homeplug_av.h crypto.h device.h endian.h /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/include/faifa make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_install -O--buildsystem=autoconf dh_installdocs -O--buildsystem=autoconf dh_installchangelogs -O--buildsystem=autoconf dh_installman -O--buildsystem=autoconf dh_installinit -O--buildsystem=autoconf dh_installsystemduser -O--buildsystem=autoconf dh_lintian -O--buildsystem=autoconf dh_perl -O--buildsystem=autoconf dh_link -O--buildsystem=autoconf dh_strip_nondeterminism -O--buildsystem=autoconf dh_compress -O--buildsystem=autoconf dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -O--buildsystem=autoconf dwz: dwz: debian/faifa/usr/bin/faifa: .debug_info section not presentdebian/libfaifa0t64/usr/lib/aarch64-linux-gnu/libfaifa.so.0: .debug_info section not present dh_strip -O--buildsystem=autoconf dh_makeshlibs -O--buildsystem=autoconf debian/rules override_dh_shlibdeps make[1]: Entering directory '/build/reproducible-path/faifa-0.2~svn82' dh_shlibdeps -Llibfaifa -l/build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/lib/faifa -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged make[1]: Leaving directory '/build/reproducible-path/faifa-0.2~svn82' dh_installdeb -O--buildsystem=autoconf dh_gencontrol -O--buildsystem=autoconf dh_md5sums -O--buildsystem=autoconf dh_builddeb -O--buildsystem=autoconf dpkg-deb: building package 'faifa' in '../faifa_0.2~svn82-3.1_arm64.deb'. dpkg-deb: building package 'libfaifa0t64' in '../libfaifa0t64_0.2~svn82-3.1_arm64.deb'. dpkg-deb: building package 'libfaifa-dev' in '../libfaifa-dev_0.2~svn82-3.1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../faifa_0.2~svn82-3.1_arm64.buildinfo dpkg-genchanges --build=binary -O../faifa_0.2~svn82-3.1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/4162577 and its subdirectories I: Current time: Mon Jan 20 23:21:22 +14 2025 I: pbuilder-time-stamp: 1737364882 + false + set +x Mon Jan 20 09:21:22 UTC 2025 I: Signing ./b2/faifa_0.2~svn82-3.1_arm64.buildinfo as faifa_0.2~svn82-3.1_arm64.buildinfo.asc Mon Jan 20 09:21:22 UTC 2025 I: Signed ./b2/faifa_0.2~svn82-3.1_arm64.buildinfo as ./b2/faifa_0.2~svn82-3.1_arm64.buildinfo.asc Mon Jan 20 09:21:22 UTC 2025 - build #2 for faifa/trixie/arm64 on codethink02-arm64 done. Starting cleanup. All cleanup done. Mon Jan 20 09:21:22 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-LoijkIPA, removing. /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA: total 52 drwxr-xr-x 2 jenkins jenkins 4096 Jan 20 09:20 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jan 20 09:21 b2 -rw-r--r-- 1 jenkins jenkins 2032 Feb 28 2024 faifa_0.2~svn82-3.1.dsc -rw------- 1 jenkins jenkins 37780 Jan 20 09:20 rbuildlog.Vv8msYD /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1: total 136 -rw-r--r-- 1 jenkins jenkins 34323 Jan 20 09:20 build.log -rw-r--r-- 1 jenkins jenkins 4212 Jan 20 09:20 faifa_0.2~svn82-3.1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2032 Jan 20 09:20 faifa_0.2~svn82-3.1.dsc -rw-r--r-- 1 jenkins jenkins 5557 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6439 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1858 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.changes -rw-r--r-- 1 jenkins jenkins 8192 Jan 20 09:20 faifa_0.2~svn82-3.1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1262 Jan 20 09:20 faifa_0.2~svn82-3.1_source.changes -rw-r--r-- 1 jenkins jenkins 31380 Jan 20 09:20 libfaifa-dev_0.2~svn82-3.1_arm64.deb -rw-r--r-- 1 jenkins jenkins 22892 Jan 20 09:20 libfaifa0t64_0.2~svn82-3.1_arm64.deb /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2: total 136 -rw-r--r-- 1 jenkins jenkins 36265 Jan 20 09:21 build.log -rw-r--r-- 1 jenkins jenkins 4212 Jan 20 09:21 faifa_0.2~svn82-3.1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2032 Jan 20 09:21 faifa_0.2~svn82-3.1.dsc -rw-r--r-- 1 jenkins jenkins 5557 Jan 20 09:21 faifa_0.2~svn82-3.1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 6439 Jan 20 09:21 faifa_0.2~svn82-3.1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1858 Jan 20 09:21 faifa_0.2~svn82-3.1_arm64.changes -rw-r--r-- 1 jenkins jenkins 8192 Jan 20 09:21 faifa_0.2~svn82-3.1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1262 Jan 20 09:21 faifa_0.2~svn82-3.1_source.changes -rw-r--r-- 1 jenkins jenkins 31380 Jan 20 09:21 libfaifa-dev_0.2~svn82-3.1_arm64.deb -rw-r--r-- 1 jenkins jenkins 22892 Jan 20 09:21 libfaifa0t64_0.2~svn82-3.1_arm64.deb Mon Jan 20 09:21:23 UTC 2025 I: Deleting $TMPDIR on codethink02-arm64.debian.net. Mon Jan 20 09:21:24 UTC 2025 I: faifa_0.2~svn82-3.1_arm64.changes: Format: 1.8 Date: Wed, 28 Feb 2024 03:46:05 +0000 Source: faifa Binary: faifa libfaifa-dev libfaifa0t64 Architecture: arm64 Version: 0.2~svn82-3.1 Distribution: unstable Urgency: medium Maintainer: Debian QA Group Changed-By: Michael Hudson-Doyle Description: faifa - manage HomePlug 1.0/AV devices via ethernet frames libfaifa-dev - manage HomePlug 1.0/AV devices via ethernet frames - devel librar libfaifa0t64 - manage HomePlug 1.0/AV devices via ethernet frames - library Closes: 1062544 Changes: faifa (0.2~svn82-3.1) unstable; urgency=medium . * Non-maintainer upload. * Rename libraries for 64-bit time_t transition. Closes: #1062544 Checksums-Sha1: 85244287d6424c1ee826f72739b5f0b84ba31cbe 5557 faifa_0.2~svn82-3.1_arm64.buildinfo 3aa05e1026e282e5c4abfe4130ef3760bc30166b 8192 faifa_0.2~svn82-3.1_arm64.deb 23a8da6ad9b550bcd9a26a64a327377222cd855b 31380 libfaifa-dev_0.2~svn82-3.1_arm64.deb 0a80f5bb10447f12037881d302aa526292a46ed7 22892 libfaifa0t64_0.2~svn82-3.1_arm64.deb Checksums-Sha256: 333f65ecb34a22823467bb54018fd04b5999999fcba3eaedc188ee738e3a51a9 5557 faifa_0.2~svn82-3.1_arm64.buildinfo 9c639350c39b6ac18c5efe1a9a7e202228f0cf772dca66bfd666e690ae155943 8192 faifa_0.2~svn82-3.1_arm64.deb 9ed273e668a4f0a7b80a5afc42ee8c105eea4dd8b9d562bd206bfbe55e832dd9 31380 libfaifa-dev_0.2~svn82-3.1_arm64.deb daad8414c3923480e5b53a1da3028d49d2e7118c7b0ee0308bb8ce8f91d20da4 22892 libfaifa0t64_0.2~svn82-3.1_arm64.deb Files: b0402d740c45a4836e65d29db528e0f9 5557 net optional faifa_0.2~svn82-3.1_arm64.buildinfo 16b2d669b61b6a8ff06b7b64a94e5ac3 8192 net optional faifa_0.2~svn82-3.1_arm64.deb fc35c62bcf0a3c02053cdc49c018f391 31380 libdevel optional libfaifa-dev_0.2~svn82-3.1_arm64.deb 970561f6bceef5f0eb3bcc6b5eb6b1c4 22892 libs optional libfaifa0t64_0.2~svn82-3.1_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/faifa_0.2~svn82-3.1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/faifa_0.2~svn82-3.1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/faifa_0.2~svn82-3.1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/faifa_0.2~svn82-3.1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/faifa_0.2~svn82-3.1_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/faifa_0.2~svn82-3.1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-01-20 09:20:41.354141889 +0000 +++ b2/build.log 2025-01-20 09:21:23.368253179 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Sun Feb 22 03:42:30 -12 2026 -I: pbuilder-time-stamp: 1771774950 +I: Current time: Mon Jan 20 23:20:44 +14 2025 +I: pbuilder-time-stamp: 1737364844 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -22,52 +22,84 @@ dpkg-source: info: unpacking faifa_0.2~svn82-3.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/1061957/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D01_modify_environment starting +debug: Running on codethink02-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Jan 20 09:20 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='63b7de74d7684604a8b0d3be8b7fe441' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='1061957' - PS1='# ' - PS2='> ' + INVOCATION_ID=dd553a13e9894cbb8b9c8ea761665404 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=4162577 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_g3y6 --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1 --logfile b1/build.log faifa_0.2~svn82-3.1.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/pbuilderrc_xKwr --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2 --logfile b2/build.log faifa_0.2~svn82-3.1.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink03-arm64 6.1.0-30-cloud-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-30-cloud-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/1061957/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -150,7 +182,7 @@ Get: 39 http://deb.debian.org/debian trixie/main arm64 libpcap0.8t64 arm64 1.10.5-1 [160 kB] Get: 40 http://deb.debian.org/debian trixie/main arm64 libpcap0.8-dev arm64 1.10.5-1 [274 kB] Get: 41 http://deb.debian.org/debian trixie/main arm64 libssl-dev arm64 3.4.0-2 [3234 kB] -Fetched 25.5 MB in 0s (81.5 MB/s) +Fetched 25.5 MB in 0s (112 MB/s) Preconfiguring packages ... Selecting previously unselected package sgml-base. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19970 files and directories currently installed.) @@ -335,7 +367,11 @@ fakeroot is already the newest version (1.36.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/faifa-0.2~svn82/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../faifa_0.2~svn82-3.1_source.changes +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/faifa-0.2~svn82/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../faifa_0.2~svn82-3.1_source.changes dpkg-buildpackage: info: source package faifa dpkg-buildpackage: info: source version 0.2~svn82-3.1 dpkg-buildpackage: info: source distribution unstable @@ -522,8 +558,8 @@ rm -f faifa.8.gz gzip -c -q -9v faifa.8 > faifa.8.gz strip faifa -strip libfaifa.so.0 faifa.8: 62.2% -- replaced with stdout +strip libfaifa.so.0 /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -m0644 faifa.8.gz /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/share/man/man8 /usr/bin/install -c -d /build/reproducible-path/faifa-0.2~svn82/debian/tmp/usr/bin @@ -547,8 +583,8 @@ dh_fixperms -O--buildsystem=autoconf dh_missing -O--buildsystem=autoconf dh_dwz -O--buildsystem=autoconf -dwz: debian/faifa/usr/bin/faifa: .debug_info section not present -dwz: debian/libfaifa0t64/usr/lib/aarch64-linux-gnu/libfaifa.so.0: .debug_info section not present +dwz: dwz: debian/faifa/usr/bin/faifa: .debug_info section not presentdebian/libfaifa0t64/usr/lib/aarch64-linux-gnu/libfaifa.so.0: .debug_info section not present + dh_strip -O--buildsystem=autoconf dh_makeshlibs -O--buildsystem=autoconf debian/rules override_dh_shlibdeps @@ -577,12 +613,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/4162577/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/1061957 and its subdirectories -I: Current time: Sun Feb 22 03:43:39 -12 2026 -I: pbuilder-time-stamp: 1771775019 +I: removing directory /srv/workspace/pbuilder/4162577 and its subdirectories +I: Current time: Mon Jan 20 23:21:22 +14 2025 +I: pbuilder-time-stamp: 1737364882 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/faifa_0.2~svn82-3.1.diff: 67.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/faifa_0.2~svn82-3.1.diff.gz b2/build.log: 76.9% -- replaced with stdout Compressing the 1st log... b1/build.log: 77.6% -- replaced with stdout Mon Jan 20 09:21:25 UTC 2025 I: diffoscope 285 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_faifa_trixie_arm64_1737364885 + touch /var/log/reproducible-builds/diffoscope_stamp_faifa_trixie_arm64_1737364885 + RESULT=0 + systemd-run '--description=diffoscope on faifa/0.2~svn82-3.1 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_21-49371 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA --run-session -c jenkins-reproducible-trixie-diffoscope-7d2222a7-6b6f-4839-8247-5788c7665e0c -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/dbd-tmp-UYTcK7f ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/faifa_0.2~svn82-3.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/faifa_0.2~svn82-3.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/faifa_0.2~svn82-3.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1/faifa_0.2~svn82-3.1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2/faifa_0.2~svn82-3.1_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_21-49371.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/faifa_0.2~svn82-3.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/faifa_0.2~svn82-3.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/faifa_0.2~svn82-3.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b1/faifa_0.2~svn82-3.1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.KN1jKuRA/b2/faifa_0.2~svn82-3.1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.335s) 0.335s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 636ms CPU time consumed: 635ms __ _ __ / _| __ _(_)/ _| __ _ | |_ / _` | | |_ / _` | | _| (_| | | _| (_| | |_| \__,_|_|_| \__,_| Mon Jan 20 09:21:26 UTC 2025 I: diffoscope 285 found no differences in the changes files, and a .buildinfo file also exists. Mon Jan 20 09:21:26 UTC 2025 I: faifa from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-01-20 09:21:26] INFO: Starting at 2025-01-20 09:21:26.750611 [2025-01-20 09:21:26] INFO: Generating the pages of 1 package(s) [2025-01-20 09:21:27] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/faifa didn't produce a buildlog, even though it has been built. [2025-01-20 09:21:27] INFO: Finished at 2025-01-20 09:21:27.283584, took: 0:00:00.532980 Mon Jan 20 09:21:27 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/faifa.html Mon Jan 20 09:21:27 UTC 2025 I: Submitting .buildinfo files to external archives: Mon Jan 20 09:21:27 UTC 2025 I: Submitting 8.0K b1/faifa_0.2~svn82-3.1_arm64.buildinfo.asc https://buildinfo.debian.net/85244287d6424c1ee826f72739b5f0b84ba31cbe/faifa_0.2~svn82-3.1_arm64 Mon Jan 20 09:21:28 UTC 2025 I: Submitting 8.0K b2/faifa_0.2~svn82-3.1_arm64.buildinfo.asc https://buildinfo.debian.net/b8e1bf1cde704a1661106c73dff6aaa4ae7dbb7a/faifa_0.2~svn82-3.1_arm64 Mon Jan 20 09:21:29 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Jan 20 09:21:29 UTC 2025 I: Done submitting .buildinfo files. Mon Jan 20 09:21:29 UTC 2025 I: Removing signed faifa_0.2~svn82-3.1_arm64.buildinfo.asc files: removed './b1/faifa_0.2~svn82-3.1_arm64.buildinfo.asc' removed './b2/faifa_0.2~svn82-3.1_arm64.buildinfo.asc' 1737364889 arm64 trixie faifa Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/faifa_0.2~svn82-3.1.rbuild.log: 74.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/faifa_0.2~svn82-3.1.rbuild.log.gz [2025-01-20 09:21:29] INFO: Starting at 2025-01-20 09:21:29.460458 [2025-01-20 09:21:29] INFO: Generating the pages of 1 package(s) [2025-01-20 09:21:29] INFO: Finished at 2025-01-20 09:21:29.902893, took: 0:00:00.442442 All cleanup done. Mon Jan 20 09:21:30 UTC 2025 - total duration: 0h 2m 10s. Mon Jan 20 09:21:30 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-AQEsefFu, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 13.978s CPU time consumed: 6.987s