Running as unit: rb-build-arm64_6-66728.service ==================================================================================== Thu Nov 21 17:01:17 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_6) on jenkins, called using "codethink04-arm64 codethink01-arm64" as arguments. Thu Nov 21 17:01:17 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-byz45YuT" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 17:01:17 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Thu Nov 21 17:01:17 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-peyqZP' Thu Nov 21 17:01:18 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Thu Nov 21 17:01:18 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-UpVKEZ' ok, let's check if libtie-cycle-perl is building anywhere yet… ok, libtie-cycle-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libtie-cycle-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink01-arm64.debian.net. ============================================================================= Thu Nov 21 17:01:28 UTC 2024 I: starting to build libtie-cycle-perl/trixie/arm64 on jenkins on '2024-11-21 17:01' Thu Nov 21 17:01:28 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_6/66728/console.log 1732208488 arm64 trixie libtie-cycle-perl Thu Nov 21 17:01:28 UTC 2024 I: Downloading source for trixie/libtie-cycle-perl=1.228-1 --2024-11-21 17:01:29-- http://deb.debian.org/debian/pool/main/libt/libtie-cycle-perl/libtie-cycle-perl_1.228-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2417 (2.4K) [text/prs.lines.tag] Saving to: ‘libtie-cycle-perl_1.228-1.dsc’ 0K .. 100% 232M=0s 2024-11-21 17:01:29 (232 MB/s) - ‘libtie-cycle-perl_1.228-1.dsc’ saved [2417/2417] --2024-11-21 17:01:29-- http://deb.debian.org/debian/pool/main/libt/libtie-cycle-perl/libtie-cycle-perl_1.228-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2417 (2.4K) [text/prs.lines.tag] Saving to: ‘libtie-cycle-perl_1.228-1.dsc’ 0K .. 100% 232M=0s 2024-11-21 17:01:29 (232 MB/s) - ‘libtie-cycle-perl_1.228-1.dsc’ saved [2417/2417] Thu Nov 21 17:01:29 UTC 2024 I: libtie-cycle-perl_1.228-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libtie-cycle-perl Binary: libtie-cycle-perl Architecture: all Version: 1.228-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Tie-Cycle Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libtest-pod-coverage-perl , libtest-pod-perl , perl Package-List: libtie-cycle-perl deb perl optional arch=all Checksums-Sha1: fcde4d45afca15819dc6e1d0352e06954b88eae9 11687 libtie-cycle-perl_1.228.orig.tar.gz 0d092ef932e996c0ceddf3f80b649872ed0ea777 5620 libtie-cycle-perl_1.228-1.debian.tar.xz Checksums-Sha256: 875651be1c657d85bcac056a76be22888395412c8e5af3d84d4c37b8fbb5b448 11687 libtie-cycle-perl_1.228.orig.tar.gz 619eb9b50eb513e08f1322e88411832bfabbe27615685377f7adfa429783c046 5620 libtie-cycle-perl_1.228-1.debian.tar.xz Files: 2c99b09532d80599f4b041f3ecae7af8 11687 libtie-cycle-perl_1.228.orig.tar.gz 75dca1ed1ca386c7ef027a0cc5ff8a3a 5620 libtie-cycle-perl_1.228-1.debian.tar.xz Dgit: da7f5ce23f26c13b467a7daf44018103bb0c69a3 debian archive/debian/1.228-1 https://git.dgit.debian.org/libtie-cycle-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmXFaqJfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZ23A//dOqIEIYPsoyr7/wT69U+BDZC6GOVBR8oOyC3xLaxsnf7f680Z80ayMik QOwlgTd91GHJMCfi0OD0+tFFazpIbxzXhtxfIiLaXGfiYgHF/A4qoi8N2riwyg3H VqFIL++yYoUERowRBovrBEfYCWAMeJdNr/1M/8NTfcLRmll6mO3NCXsoH8V5nkga 9i0iq+KVJjzxbCjl3MW83KRP4M1ryvlW3v9+tFVFt1pjsoQ7u3F0r5q7SNFG/P9+ D0cwq8wQjDD3O8sJJowzg/IsKJR4hUwLD9/754X1+b+ueOanjTRQQ6KdGG6zrwZ+ 2H8zR5Zja5jRYtSj/beQCFY3WZKSSk49uCFK8vrN/NPj9HPsCtYgOIlpOkDszY5G RAA4GgP9gcSIup9dw4xvsXa3iAXmR3WTAgdqdYF5s+2lITVdgslZ1fcpVBRahcS/ 6Kfd20Bb1TtOaatJ+66YVZPG6afCxgNu22mzxi8jhcGANuMCvNnFGCiLCPLzCbSq 1PsHBJ/KOgGYmwxKgkAxKiLU+zemc6o0xaM3FrwhvPXy18ge1d0gA0YqERR+/iBb z6kthfpPMxrQ02S/X/fnB8Puojj1nRYByuvS27wrl0ocZTRT1qryvA5YdNxg6OOc VE+EqEs6crcMOCq4Om8hsfIqc4e8TW7PjDLz3DmqLpp9Rxfzr/A= =VGpD -----END PGP SIGNATURE----- Thu Nov 21 17:01:29 UTC 2024 I: Checking whether the package is not for us Thu Nov 21 17:01:29 UTC 2024 I: Starting 1st build on remote node codethink04-arm64.debian.net. Thu Nov 21 17:01:29 UTC 2024 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Thu Nov 21 17:01:29 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Thu Nov 21 17:01:29 UTC 2024 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-yONS3A' ==================================================================================== Thu Nov 21 17:01:31 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libtie-cycle-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ 1.228-1" as arguments. Thu Nov 21 17:01:31 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-2UTu6Qly" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 17:01:31 UTC 2024 I: Downloading source for trixie/libtie-cycle-perl=1.228-1 Reading package lists... NOTICE: 'libtie-cycle-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 19.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (dsc) [2417 B] Get:2 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (tar) [11.7 kB] Get:3 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (diff) [5620 B] Fetched 19.7 kB in 0s (828 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libtie-cycle-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 19.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (dsc) [2417 B] Get:2 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (tar) [11.7 kB] Get:3 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (diff) [5620 B] Fetched 19.7 kB in 0s (828 kB/s) Download complete and in download only mode ============================================================================= Building libtie-cycle-perl in trixie on arm64 on codethink04-arm64 now. Date: Thu Nov 21 17:01:31 GMT 2024 Date UTC: Thu Nov 21 17:01:31 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Nov 21 05:01:31 -12 2024 I: pbuilder-time-stamp: 1732208491 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtie-cycle-perl_1.228-1.dsc] I: copying [./libtie-cycle-perl_1.228.orig.tar.gz] I: copying [./libtie-cycle-perl_1.228-1.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Feb 8 23:58:26 2024 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtie-cycle-perl_1.228-1.dsc: no acceptable signature found dpkg-source: info: extracting libtie-cycle-perl in libtie-cycle-perl-1.228 dpkg-source: info: unpacking libtie-cycle-perl_1.228.orig.tar.gz dpkg-source: info: unpacking libtie-cycle-perl_1.228-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/328108/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='30fbd9d7b6eb4226982ad81890e6cee7' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='328108' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_hOMc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1 --logfile b1/build.log libtie-cycle-perl_1.228-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/328108/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-pod-coverage-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 19.6 MB of archives. After unpacking 78.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 19.6 MB in 0s (144 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../30-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../31-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../32-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libtie-cycle-perl-1.228/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtie-cycle-perl_1.228-1_source.changes dpkg-buildpackage: info: source package libtie-cycle-perl dpkg-buildpackage: info: source version 1.228-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtie-cycle-perl-1.228=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtie-cycle-perl-1.228=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Tie::Cycle Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' cp lib/Tie/Cycle.pm blib/lib/Tie/Cycle.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/cycle.t ......... ok 1 - Cycle is first element, iteration 0 ok 2 - Cycle is second element, iteration 0 ok 3 - Cycle is third element, iteration 0 ok 4 - Cycle is first element, iteration 1 ok 5 - Cycle is second element, iteration 1 ok 6 - Cycle is third element, iteration 1 ok 7 - Cycle is first element, iteration 2 ok 8 - Cycle is second element, iteration 2 ok 9 - Cycle is third element, iteration 2 1..9 ok t/load.t .......... ok 1 - use Tie::Cycle; 1..1 ok t/one.t ........... ok 1 - Cycle is first element, iteration 1 ok 2 - Cycle is first element, iteration 2 ok 3 - Cycle is first element, iteration 3 1..3 ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/Tie/Cycle.pm ok t/pod_coverage.t .. ok 1 - Pod coverage on Tie::Cycle 1..1 ok All tests successful. Files=5, Tests=15, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.41 cusr 0.05 csys = 0.51 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtie-cycle-perl/ make -j12 install DESTDIR=/build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' Manifying 1 pod document Installing /build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl/usr/share/perl5/Tie/Cycle.pm Installing /build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl/usr/share/man/man3/Tie::Cycle.3pm make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtie-cycle-perl' in '../libtie-cycle-perl_1.228-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libtie-cycle-perl_1.228-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libtie-cycle-perl_1.228-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/328108 and its subdirectories I: Current time: Thu Nov 21 05:01:55 -12 2024 I: pbuilder-time-stamp: 1732208515 Thu Nov 21 17:01:55 UTC 2024 I: Signing ./b1/libtie-cycle-perl_1.228-1_arm64.buildinfo as libtie-cycle-perl_1.228-1_arm64.buildinfo.asc Thu Nov 21 17:01:55 UTC 2024 I: Signed ./b1/libtie-cycle-perl_1.228-1_arm64.buildinfo as ./b1/libtie-cycle-perl_1.228-1_arm64.buildinfo.asc Thu Nov 21 17:01:55 UTC 2024 - build #1 for libtie-cycle-perl/trixie/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Thu Nov 21 17:01:55 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-2UTu6Qly, removing. /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:01 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:01 b2 -rw-r--r-- 1 jenkins jenkins 2417 Feb 9 2024 libtie-cycle-perl_1.228-1.dsc -rw------- 1 jenkins jenkins 3595 Nov 21 17:01 rbuildlog.LmHCf6k /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1: total 84 -rw-r--r-- 1 jenkins jenkins 22341 Nov 21 17:01 build.log -rw-r--r-- 1 jenkins jenkins 5620 Nov 21 17:01 libtie-cycle-perl_1.228-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2417 Nov 21 17:01 libtie-cycle-perl_1.228-1.dsc -rw-r--r-- 1 jenkins jenkins 11764 Nov 21 17:01 libtie-cycle-perl_1.228-1_all.deb -rw-r--r-- 1 jenkins jenkins 4879 Nov 21 17:01 libtie-cycle-perl_1.228-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5761 Nov 21 17:01 libtie-cycle-perl_1.228-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1431 Nov 21 17:01 libtie-cycle-perl_1.228-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 1875 Nov 21 17:01 libtie-cycle-perl_1.228-1_source.changes -rw-r--r-- 1 jenkins jenkins 11687 Nov 21 17:01 libtie-cycle-perl_1.228.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2: total 0 Thu Nov 21 17:01:56 UTC 2024 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Nov 21 05:01:31 -12 2024 I: pbuilder-time-stamp: 1732208491 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtie-cycle-perl_1.228-1.dsc] I: copying [./libtie-cycle-perl_1.228.orig.tar.gz] I: copying [./libtie-cycle-perl_1.228-1.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Feb 8 23:58:26 2024 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtie-cycle-perl_1.228-1.dsc: no acceptable signature found dpkg-source: info: extracting libtie-cycle-perl in libtie-cycle-perl-1.228 dpkg-source: info: unpacking libtie-cycle-perl_1.228.orig.tar.gz dpkg-source: info: unpacking libtie-cycle-perl_1.228-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/328108/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='30fbd9d7b6eb4226982ad81890e6cee7' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='328108' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_hOMc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1 --logfile b1/build.log libtie-cycle-perl_1.228-1.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/328108/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-pod-coverage-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 19.6 MB of archives. After unpacking 78.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 19.6 MB in 0s (144 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../30-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../31-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../32-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libtie-cycle-perl-1.228/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtie-cycle-perl_1.228-1_source.changes dpkg-buildpackage: info: source package libtie-cycle-perl dpkg-buildpackage: info: source version 1.228-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtie-cycle-perl-1.228=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtie-cycle-perl-1.228=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Tie::Cycle Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' cp lib/Tie/Cycle.pm blib/lib/Tie/Cycle.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/cycle.t ......... ok 1 - Cycle is first element, iteration 0 ok 2 - Cycle is second element, iteration 0 ok 3 - Cycle is third element, iteration 0 ok 4 - Cycle is first element, iteration 1 ok 5 - Cycle is second element, iteration 1 ok 6 - Cycle is third element, iteration 1 ok 7 - Cycle is first element, iteration 2 ok 8 - Cycle is second element, iteration 2 ok 9 - Cycle is third element, iteration 2 1..9 ok t/load.t .......... ok 1 - use Tie::Cycle; 1..1 ok t/one.t ........... ok 1 - Cycle is first element, iteration 1 ok 2 - Cycle is first element, iteration 2 ok 3 - Cycle is first element, iteration 3 1..3 ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/Tie/Cycle.pm ok t/pod_coverage.t .. ok 1 - Pod coverage on Tie::Cycle 1..1 ok All tests successful. Files=5, Tests=15, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.41 cusr 0.05 csys = 0.51 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtie-cycle-perl/ make -j12 install DESTDIR=/build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' Manifying 1 pod document Installing /build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl/usr/share/perl5/Tie/Cycle.pm Installing /build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl/usr/share/man/man3/Tie::Cycle.3pm make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtie-cycle-perl' in '../libtie-cycle-perl_1.228-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libtie-cycle-perl_1.228-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libtie-cycle-perl_1.228-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/328108 and its subdirectories I: Current time: Thu Nov 21 05:01:55 -12 2024 I: pbuilder-time-stamp: 1732208515 Thu Nov 21 17:01:57 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink01-arm64.debian.net. Thu Nov 21 17:01:57 UTC 2024 I: Preparing to do remote build '2' on codethink01-arm64.debian.net. Thu Nov 21 17:01:57 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink01-arm64.debian.net is marked as down. Thu Nov 21 17:01:57 UTC 2024 - checking via ssh if codethink01-arm64.debian.net is up. removed '/tmp/read-only-fs-test-CMkNHF' ==================================================================================== Wed Dec 24 23:24:58 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink01-arm64, called using "2 libtie-cycle-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ 1.228-1" as arguments. Wed Dec 24 23:24:58 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-kyNJxDta" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Dec 24 23:24:58 UTC 2025 I: Downloading source for trixie/libtie-cycle-perl=1.228-1 Reading package lists... NOTICE: 'libtie-cycle-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 19.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (dsc) [2417 B] Get:2 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (tar) [11.7 kB] Get:3 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (diff) [5620 B] Fetched 19.7 kB in 0s (961 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libtie-cycle-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtie-cycle-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 19.7 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (dsc) [2417 B] Get:2 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (tar) [11.7 kB] Get:3 http://deb.debian.org/debian trixie/main libtie-cycle-perl 1.228-1 (diff) [5620 B] Fetched 19.7 kB in 0s (961 kB/s) Download complete and in download only mode ============================================================================= Re-Building libtie-cycle-perl in trixie on arm64 on codethink01-arm64 now. Date: Wed Dec 24 23:24:58 GMT 2025 Date UTC: Wed Dec 24 23:24:58 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_1HQX + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libtie-cycle-perl = debian-installer -o libtie-cycle-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libtie-cycle-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_1HQX --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2 --logfile b2/build.log libtie-cycle-perl_1.228-1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 13:24:58 +14 2025 I: pbuilder-time-stamp: 1766618698 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtie-cycle-perl_1.228-1.dsc] I: copying [./libtie-cycle-perl_1.228.orig.tar.gz] I: copying [./libtie-cycle-perl_1.228-1.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Feb 8 23:58:26 2024 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtie-cycle-perl_1.228-1.dsc: no acceptable signature found dpkg-source: info: extracting libtie-cycle-perl in libtie-cycle-perl-1.228 dpkg-source: info: unpacking libtie-cycle-perl_1.228.orig.tar.gz dpkg-source: info: unpacking libtie-cycle-perl_1.228-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D01_modify_environment starting debug: Running on codethink01-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 24 23:25 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=76ab121b178b460b8a7f292f281b9591 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=127390 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_1HQX --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2 --logfile b2/build.log libtie-cycle-perl_1.228-1.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-pod-coverage-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 19.6 MB of archives. After unpacking 78.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5+b1 [9239 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main arm64 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 19.6 MB in 0s (119 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_arm64.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ... Unpacking libelf1t64:arm64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5+b1_arm64.deb ... Unpacking libicu72:arm64 (72.1-5+b1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ... Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../30-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../31-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../32-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:arm64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/127390/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/127390/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libtie-cycle-perl-1.228/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtie-cycle-perl_1.228-1_source.changes dpkg-buildpackage: info: source package libtie-cycle-perl dpkg-buildpackage: info: source version 1.228-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtie-cycle-perl-1.228=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtie-cycle-perl-1.228=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Tie::Cycle Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' cp lib/Tie/Cycle.pm blib/lib/Tie/Cycle.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/cycle.t ......... ok 1 - Cycle is first element, iteration 0 ok 2 - Cycle is second element, iteration 0 ok 3 - Cycle is third element, iteration 0 ok 4 - Cycle is first element, iteration 1 ok 5 - Cycle is second element, iteration 1 ok 6 - Cycle is third element, iteration 1 ok 7 - Cycle is first element, iteration 2 ok 8 - Cycle is second element, iteration 2 ok 9 - Cycle is third element, iteration 2 1..9 ok t/load.t .......... ok 1 - use Tie::Cycle; 1..1 ok t/one.t ........... ok 1 - Cycle is first element, iteration 1 ok 2 - Cycle is first element, iteration 2 ok 3 - Cycle is first element, iteration 3 1..3 ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/Tie/Cycle.pm ok t/pod_coverage.t .. ok 1 - Pod coverage on Tie::Cycle 1..1 ok All tests successful. Files=5, Tests=15, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.27 cusr 0.04 csys = 0.34 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtie-cycle-perl/ make -j12 install DESTDIR=/build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtie-cycle-perl-1.228' Manifying 1 pod document Installing /build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl/usr/share/perl5/Tie/Cycle.pm Installing /build/reproducible-path/libtie-cycle-perl-1.228/debian/libtie-cycle-perl/usr/share/man/man3/Tie::Cycle.3pm make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtie-cycle-perl' in '../libtie-cycle-perl_1.228-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libtie-cycle-perl_1.228-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libtie-cycle-perl_1.228-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/127390/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/127390/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/127390 and its subdirectories I: Current time: Thu Dec 25 13:25:26 +14 2025 I: pbuilder-time-stamp: 1766618726 + false + set +x Wed Dec 24 23:25:26 UTC 2025 I: Signing ./b2/libtie-cycle-perl_1.228-1_arm64.buildinfo as libtie-cycle-perl_1.228-1_arm64.buildinfo.asc Wed Dec 24 23:25:26 UTC 2025 I: Signed ./b2/libtie-cycle-perl_1.228-1_arm64.buildinfo as ./b2/libtie-cycle-perl_1.228-1_arm64.buildinfo.asc Wed Dec 24 23:25:26 UTC 2025 - build #2 for libtie-cycle-perl/trixie/arm64 on codethink01-arm64 done. Starting cleanup. All cleanup done. Wed Dec 24 23:25:26 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-kyNJxDta, removing. /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:01 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 17:02 b2 -rw-r--r-- 1 jenkins jenkins 2417 Feb 9 2024 libtie-cycle-perl_1.228-1.dsc -rw------- 1 jenkins jenkins 26237 Nov 21 17:01 rbuildlog.LmHCf6k /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1: total 84 -rw-r--r-- 1 jenkins jenkins 22341 Nov 21 17:01 build.log -rw-r--r-- 1 jenkins jenkins 5620 Nov 21 17:01 libtie-cycle-perl_1.228-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2417 Nov 21 17:01 libtie-cycle-perl_1.228-1.dsc -rw-r--r-- 1 jenkins jenkins 11764 Nov 21 17:01 libtie-cycle-perl_1.228-1_all.deb -rw-r--r-- 1 jenkins jenkins 4879 Nov 21 17:01 libtie-cycle-perl_1.228-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5761 Nov 21 17:01 libtie-cycle-perl_1.228-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1431 Nov 21 17:01 libtie-cycle-perl_1.228-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 1875 Nov 21 17:01 libtie-cycle-perl_1.228-1_source.changes -rw-r--r-- 1 jenkins jenkins 11687 Nov 21 17:01 libtie-cycle-perl_1.228.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2: total 84 -rw-r--r-- 1 jenkins jenkins 24278 Nov 21 17:02 build.log -rw-r--r-- 1 jenkins jenkins 5620 Nov 21 17:02 libtie-cycle-perl_1.228-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2417 Nov 21 17:02 libtie-cycle-perl_1.228-1.dsc -rw-r--r-- 1 jenkins jenkins 11764 Nov 21 17:02 libtie-cycle-perl_1.228-1_all.deb -rw-r--r-- 1 jenkins jenkins 4879 Nov 21 17:02 libtie-cycle-perl_1.228-1_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5761 Nov 21 17:02 libtie-cycle-perl_1.228-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1431 Nov 21 17:02 libtie-cycle-perl_1.228-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 1875 Nov 21 17:02 libtie-cycle-perl_1.228-1_source.changes -rw-r--r-- 1 jenkins jenkins 11687 Nov 21 17:02 libtie-cycle-perl_1.228.orig.tar.gz Thu Nov 21 17:02:27 UTC 2024 I: Deleting $TMPDIR on codethink01-arm64.debian.net. Thu Nov 21 17:02:28 UTC 2024 I: libtie-cycle-perl_1.228-1_arm64.changes: Format: 1.8 Date: Fri, 09 Feb 2024 00:56:48 +0100 Source: libtie-cycle-perl Binary: libtie-cycle-perl Architecture: all Version: 1.228-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libtie-cycle-perl - module for cycling through a list of values via a scalar Changes: libtie-cycle-perl (1.228-1) unstable; urgency=medium . * Import upstream version 1.227. * Update years of upstream and packaging copyright. * Declare compliance with Debian Policy 4.6.0. . * Import upstream version 1.228. * Update debian/upstream/metadata. * Update years of upstream and packaging copyright. * Update upstream email address. * Declare compliance with Debian Policy 4.6.2. Checksums-Sha1: dfb292b78d362c28916cd4925ffa2b38056ac0c7 11764 libtie-cycle-perl_1.228-1_all.deb 74c6039f1299c258171d8c0d007305a1033a8258 4879 libtie-cycle-perl_1.228-1_arm64.buildinfo Checksums-Sha256: 453ab31babf6e33960d7b0b9c3e7910a7f4efdca3af07300efd90b9751ac5cc7 11764 libtie-cycle-perl_1.228-1_all.deb a6c5ba8a52b0e7e2911a7d34b8a000348bc9aba83aac1404dd3307601370c1d2 4879 libtie-cycle-perl_1.228-1_arm64.buildinfo Files: 7099747092ee95f9d89d9eb0ead0294a 11764 perl optional libtie-cycle-perl_1.228-1_all.deb 96e95c06a545fe233a747fcbbb979790 4879 perl optional libtie-cycle-perl_1.228-1_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libtie-cycle-perl_1.228-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libtie-cycle-perl_1.228-1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libtie-cycle-perl_1.228-1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libtie-cycle-perl_1.228-1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libtie-cycle-perl_1.228-1_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libtie-cycle-perl_1.228-1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-21 17:01:56.132880964 +0000 +++ b2/build.log 2024-11-21 17:02:27.527466148 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Nov 21 05:01:31 -12 2024 -I: pbuilder-time-stamp: 1732208491 +I: Current time: Thu Dec 25 13:24:58 +14 2025 +I: pbuilder-time-stamp: 1766618698 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -25,52 +25,84 @@ dpkg-source: info: unpacking libtie-cycle-perl_1.228-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/328108/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D01_modify_environment starting +debug: Running on codethink01-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 24 23:25 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='30fbd9d7b6eb4226982ad81890e6cee7' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='328108' - PS1='# ' - PS2='> ' + INVOCATION_ID=76ab121b178b460b8a7f292f281b9591 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=127390 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_hOMc --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1 --logfile b1/build.log libtie-cycle-perl_1.228-1.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/pbuilderrc_1HQX --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2 --logfile b2/build.log libtie-cycle-perl_1.228-1.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/328108/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -144,7 +176,7 @@ Get: 32 http://deb.debian.org/debian trixie/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] -Fetched 19.6 MB in 0s (144 MB/s) +Fetched 19.6 MB in 0s (119 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20087 files and directories currently installed.) @@ -297,7 +329,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libtie-cycle-perl-1.228/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtie-cycle-perl_1.228-1_source.changes +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libtie-cycle-perl-1.228/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtie-cycle-perl_1.228-1_source.changes dpkg-buildpackage: info: source package libtie-cycle-perl dpkg-buildpackage: info: source version 1.228-1 dpkg-buildpackage: info: source distribution unstable @@ -360,7 +396,7 @@ 1..1 ok All tests successful. -Files=5, Tests=15, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.41 cusr 0.05 csys = 0.51 CPU) +Files=5, Tests=15, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.27 cusr 0.04 csys = 0.34 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtie-cycle-perl-1.228' create-stamp debian/debhelper-build-stamp @@ -393,12 +429,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/127390/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/328108 and its subdirectories -I: Current time: Thu Nov 21 05:01:55 -12 2024 -I: pbuilder-time-stamp: 1732208515 +I: removing directory /srv/workspace/pbuilder/127390 and its subdirectories +I: Current time: Thu Dec 25 13:25:26 +14 2025 +I: pbuilder-time-stamp: 1766618726 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libtie-cycle-perl_1.228-1.diff: 66.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libtie-cycle-perl_1.228-1.diff.gz b2/build.log: 73.7% -- replaced with stdout Compressing the 1st log... b1/build.log: 74.5% -- replaced with stdout Thu Nov 21 17:02:29 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libtie-cycle-perl_trixie_arm64_1732208549 + touch /var/log/reproducible-builds/diffoscope_stamp_libtie-cycle-perl_trixie_arm64_1732208549 + RESULT=0 + systemd-run '--description=diffoscope on libtie-cycle-perl/1.228-1 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_6-66728 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ --run-session -c jenkins-reproducible-trixie-diffoscope-047011bc-4189-4c41-afe6-b47f2fa74453 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/dbd-tmp-n97hjX6 ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/libtie-cycle-perl_1.228-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/libtie-cycle-perl_1.228-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/libtie-cycle-perl_1.228-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1/libtie-cycle-perl_1.228-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2/libtie-cycle-perl_1.228-1_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_6-66728.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/libtie-cycle-perl_1.228-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/libtie-cycle-perl_1.228-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/libtie-cycle-perl_1.228-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b1/libtie-cycle-perl_1.228-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.acjcNAtQ/b2/libtie-cycle-perl_1.228-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.353s) 0.353s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 680ms CPU time consumed: 680ms _ _ _ _ _ _ _ | (_) |__ | |_(_) ___ ___ _ _ ___| | ___ _ __ ___ _ __| | | | | '_ \| __| |/ _ \_____ / __| | | |/ __| |/ _ \_____| '_ \ / _ \ '__| | | | | |_) | |_| | __/_____| (__| |_| | (__| | __/_____| |_) | __/ | | | |_|_|_.__/ \__|_|\___| \___|\__, |\___|_|\___| | .__/ \___|_| |_| |___/ |_| Thu Nov 21 17:02:30 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Thu Nov 21 17:02:30 UTC 2024 I: libtie-cycle-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-21 17:02:31] INFO: Starting at 2024-11-21 17:02:31.277567 [2024-11-21 17:02:31] INFO: Generating the pages of 1 package(s) [2024-11-21 17:02:31] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libtie-cycle-perl didn't produce a buildlog, even though it has been built. [2024-11-21 17:02:31] INFO: Finished at 2024-11-21 17:02:31.696347, took: 0:00:00.418785 Thu Nov 21 17:02:31 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libtie-cycle-perl.html Thu Nov 21 17:02:31 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Nov 21 17:02:31 UTC 2024 I: Submitting 8.0K b1/libtie-cycle-perl_1.228-1_arm64.buildinfo.asc https://buildinfo.debian.net/74c6039f1299c258171d8c0d007305a1033a8258/libtie-cycle-perl_1.228-1_all Thu Nov 21 17:02:32 UTC 2024 I: Submitting 8.0K b2/libtie-cycle-perl_1.228-1_arm64.buildinfo.asc https://buildinfo.debian.net/065f92d0ccd6a1e84c960d47e54f67e594dc0b6e/libtie-cycle-perl_1.228-1_all Thu Nov 21 17:02:33 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Nov 21 17:02:33 UTC 2024 I: Done submitting .buildinfo files. Thu Nov 21 17:02:33 UTC 2024 I: Removing signed libtie-cycle-perl_1.228-1_arm64.buildinfo.asc files: removed './b1/libtie-cycle-perl_1.228-1_arm64.buildinfo.asc' removed './b2/libtie-cycle-perl_1.228-1_arm64.buildinfo.asc' 1732208553 arm64 trixie libtie-cycle-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libtie-cycle-perl_1.228-1.rbuild.log: 71.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libtie-cycle-perl_1.228-1.rbuild.log.gz [2024-11-21 17:02:33] INFO: Starting at 2024-11-21 17:02:33.782184 [2024-11-21 17:02:33] INFO: Generating the pages of 1 package(s) [2024-11-21 17:02:34] INFO: Finished at 2024-11-21 17:02:34.197736, took: 0:00:00.415560 All cleanup done. Thu Nov 21 17:02:34 UTC 2024 - total duration: 0h 1m 13s. Thu Nov 21 17:02:34 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-byz45YuT, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 16.545s CPU time consumed: 7.059s