Running as unit: rb-build-arm64_7-103012.service; invocation ID: 5c8a2b6e7c4a454da2e7cbab73fdc9ca ==================================================================================== Sat Nov 1 11:13:58 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_7) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Sat Nov 1 11:13:58 UTC 2025 - actually running "reproducible_build.sh" (md5sum bcb6fe1b50cf4e8eedacd0971a9eb63f) as "/tmp/jenkins-script-W30LkWCR" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Nov 1 11:13:58 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Sat Nov 1 11:13:58 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-CVW5rI' Sat Nov 1 11:13:58 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Sat Nov 1 11:13:58 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-aG9YrU' ok, let's check if libgeo-shapelib-perl is building anywhere yet… ok, libgeo-shapelib-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libgeo-shapelib-perl in forky on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Sat Nov 1 11:14:04 UTC 2025 I: starting to build libgeo-shapelib-perl/forky/arm64 on jenkins on '2025-11-01 11:13' Sat Nov 1 11:14:04 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_7/103012/console.log 1761995644 arm64 forky libgeo-shapelib-perl Sat Nov 1 11:14:04 UTC 2025 I: Downloading source for forky/libgeo-shapelib-perl=0.22-7 --2025-11-01 11:14:04-- http://deb.debian.org/debian/pool/main/libg/libgeo-shapelib-perl/libgeo-shapelib-perl_0.22-7.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2186 (2.1K) [text/prs.lines.tag] Saving to: ‘libgeo-shapelib-perl_0.22-7.dsc’ 0K .. 100% 240M=0s 2025-11-01 11:14:04 (240 MB/s) - ‘libgeo-shapelib-perl_0.22-7.dsc’ saved [2186/2186] --2025-11-01 11:14:04-- http://deb.debian.org/debian/pool/main/libg/libgeo-shapelib-perl/libgeo-shapelib-perl_0.22-7.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2186 (2.1K) [text/prs.lines.tag] Saving to: ‘libgeo-shapelib-perl_0.22-7.dsc’ 0K .. 100% 240M=0s 2025-11-01 11:14:04 (240 MB/s) - ‘libgeo-shapelib-perl_0.22-7.dsc’ saved [2186/2186] Sat Nov 1 11:14:04 UTC 2025 I: libgeo-shapelib-perl_0.22-7.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libgeo-shapelib-perl Binary: libgeo-shapelib-perl Architecture: any Version: 0.22-7 Maintainer: Debian GIS Project Uploaders: Francesco Paolo Lovergine Homepage: https://github.com/ajolma/Geo-Shapelib Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl Vcs-Git: https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git Testsuite: autopkgtest, autopkgtest-pkg-perl Testsuite-Triggers: @builddeps@, pkg-perl-autopkgtest Build-Depends: debhelper-compat (= 13), libshp-dev, libtree-r-perl, perl Package-List: libgeo-shapelib-perl deb perl optional arch=any Checksums-Sha1: 76f6f6a8407ee9ac9eab3c6fc3d9023028ccfe10 120136 libgeo-shapelib-perl_0.22.orig.tar.gz 69f5e5526bbf01d673b6196096d89a1378e93368 5912 libgeo-shapelib-perl_0.22-7.debian.tar.xz Checksums-Sha256: 7963fd115042cfea71ad40f479d3553c97c906e34fbb924a76d3b6e06fc7f6ff 120136 libgeo-shapelib-perl_0.22.orig.tar.gz 4f681bde5b4520fcc9ef295b5be1c05d28e25ef8b1b92e04124e452458c90e54 5912 libgeo-shapelib-perl_0.22-7.debian.tar.xz Files: a356e7104138aa4470bca863f7383f82 120136 libgeo-shapelib-perl_0.22.orig.tar.gz 5484e570a28f62d64b5dc5a11e380f04 5912 libgeo-shapelib-perl_0.22-7.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEgYLeQXBWQI1hRlDRZ1DxCuiNSvEFAmfJ5BQACgkQZ1DxCuiN SvG4wxAAmj3kQ1ZCsBKRnTrWg70D926Af0QfKTTVXb9wl9tpFJjtG40jtOIOkoh0 uwbRyW94Hwx4Ax3iLL83xhxrQaY3d/j7qZLhWmGAJ+4zGn7yqtFRXOoLjDfn7ePw SVL2F2qzsKELFsJWZTux/Txikn5MtliH1BdpaUFZfTNNSv0Xf139ugGva9iCsmW4 PXojcgAiHlmiE67kQZvslBu/aTP/xv1QikYDh303VHydMFWm/ELIdcWoRWGZ4zO5 xyHa7Boea1V7mpGkDR/WDWWSUu0SYuZoKvK6mhrfayu05vLuK3T3pa2KnnnFHVav A1myCKd9bvLkJ6sQdRukmZReoDgutos62fVgEpajwfpqbkxxSUN+m8k9UUe91OkZ doy6AJvP5ReY7nzjIi8A1PwZQyRGYJd1qxKgMr3/QRRHqVB835VKq5+5abuy2Ucy X3FwC0C9tqVEBIwV+HxTcarKGKtgGQECkuisRq2O5ja7xk9qMZq1HR0VxCdUnZTn P3A8R44KlZjwPKfzf1frq7s/INVHWCpm7EchdScdYO/I39aVSIZT172HcCQu33y2 DZLPvyTOrcAfW+vM5erXCgBhA/OAKbnf2SJ+aXGWUopFkCZrzt3lAkswWNEPIpZj 1LCeDYTRFAmBliIILEItEbtN75rSd1ZDSqhA4lhSIdFvw18KAb8= =czXy -----END PGP SIGNATURE----- Sat Nov 1 11:14:04 UTC 2025 I: Checking whether the package is not for us Sat Nov 1 11:14:04 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Sat Nov 1 11:14:04 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Sat Nov 1 11:14:04 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Sat Nov 1 11:14:04 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-vC5KUr' ==================================================================================== Sat Nov 1 11:14:05 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libgeo-shapelib-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ 0.22-7" as arguments. Sat Nov 1 11:14:05 UTC 2025 - actually running "reproducible_build.sh" (md5sum bcb6fe1b50cf4e8eedacd0971a9eb63f) as "/tmp/jenkins-script-J8dDW8pn" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Sat Nov 1 11:14:05 UTC 2025 I: Downloading source for forky/libgeo-shapelib-perl=0.22-7 Reading package lists... NOTICE: 'libgeo-shapelib-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git Please use: git clone https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 128 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (dsc) [2186 B] Get:2 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (tar) [120 kB] Get:3 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (diff) [5912 B] Fetched 128 kB in 0s (2464 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libgeo-shapelib-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git Please use: git clone https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 128 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (dsc) [2186 B] Get:2 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (tar) [120 kB] Get:3 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (diff) [5912 B] Fetched 128 kB in 0s (2464 kB/s) Download complete and in download only mode ============================================================================= Building libgeo-shapelib-perl in forky on arm64 on codethink04-arm64 now. Date: Sat Nov 1 11:14:05 GMT 2025 Date UTC: Sat Nov 1 11:14:05 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 23:14:05 -12 2025 I: pbuilder-time-stamp: 1761995645 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libgeo-shapelib-perl_0.22-7.dsc] I: copying [./libgeo-shapelib-perl_0.22.orig.tar.gz] I: copying [./libgeo-shapelib-perl_0.22-7.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libgeo-shapelib-perl_0.22-7.dsc: no acceptable signature found dpkg-source: info: extracting libgeo-shapelib-perl in libgeo-shapelib-perl-0.22 dpkg-source: info: unpacking libgeo-shapelib-perl_0.22.orig.tar.gz dpkg-source: info: unpacking libgeo-shapelib-perl_0.22-7.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying manpage-has-errors-from-pod2man.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2567189/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='33e1e1e82edc47d19fca5daa9ca01e50' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2567189' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_LtVs --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1 --logfile b1/build.log libgeo-shapelib-perl_0.22-7.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2567189/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libshp-dev, libtree-r-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libshp-dev; however: Package libshp-dev is not installed. pbuilder-satisfydepends-dummy depends on libtree-r-perl; however: Package libtree-r-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libshp-dev{a} libshp4{a} libtool{a} libtree-r-perl{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 11.1 MB of archives. After unpacking 45.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.6+dfsg-0.1 [601 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libshp4 arm64 1.6.2-1 [39.0 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libshp-dev arm64 1.6.2-1 [44.7 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libtree-r-perl all 0.072-3 [8196 B] Fetched 11.1 MB in 0s (146 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.6+dfsg-0.1_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libshp4:arm64. Preparing to unpack .../29-libshp4_1.6.2-1_arm64.deb ... Unpacking libshp4:arm64 (1.6.2-1) ... Selecting previously unselected package libshp-dev:arm64. Preparing to unpack .../30-libshp-dev_1.6.2-1_arm64.deb ... Unpacking libshp-dev:arm64 (1.6.2-1) ... Selecting previously unselected package libtree-r-perl. Preparing to unpack .../31-libtree-r-perl_0.072-3_all.deb ... Unpacking libtree-r-perl (0.072-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libtree-r-perl (0.072-3) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libshp4:arm64 (1.6.2-1) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libshp-dev:arm64 (1.6.2-1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libgeo-shapelib-perl-0.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libgeo-shapelib-perl_0.22-7_source.changes dpkg-buildpackage: info: source package libgeo-shapelib-perl dpkg-buildpackage: info: source version 0.22-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bas Couwenberg dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Geo::Shapelib Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' Running Mkbootstrap for Shapelib () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libgeo-shapelib-perl-0.22/typemap' Shapelib.xs > Shapelib.xsc cp lib/Geo/Shapelib.pm blib/lib/Geo/Shapelib.pm AutoSplitting blib/lib/Geo/Shapelib.pm (blib/lib/auto/Geo/Shapelib) chmod 644 "Shapelib.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 Please specify prototyping behavior for Shapelib.xs (see perlxs manual) mv Shapelib.xsc Shapelib.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/ -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DHAS_SEARCH_DISK_TREE Shapelib.c rm -f blib/arch/auto/Geo/Shapelib/Shapelib.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Shapelib.o -o blib/arch/auto/Geo/Shapelib/Shapelib.so \ -L/usr/lib/aarch64-linux-gnu/ -lshp \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Geo/Shapelib/Shapelib.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00.t .. 1..12 ok 1 - lengths ok 2 - new from data ok 3 - get_record_hashref, 19780202 == 19780202 ok 4 - dump ok 5 - save ok 6 - Rtree ok 7 - Rtree seems to work ok 8 - Quadtree spatial query ok 9 - Create Quadtree index ok 10 - get_record_hashref (unloaded rec) 4235332.51 ~ 4235332.51 ok 11 - save multipart, vertices ok 12 - save multipart, parts ok All tests successful. Files=1, Tests=12, 1 wallclock secs ( 0.00 usr 0.02 sys + 0.34 cusr 0.11 csys = 0.47 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libgeo-shapelib-perl/ make -j12 install DESTDIR=/build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Geo/Shapelib/Shapelib.so Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Geo/Shapelib.pm Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Geo/Shapelib/autosplit.ix Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/share/man/man3/Geo::Shapelib.3pm make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libgeo-shapelib-perl' in '../libgeo-shapelib-perl_0.22-7_arm64.deb'. dpkg-deb: building package 'libgeo-shapelib-perl-dbgsym' in '../libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.buildinfo dpkg-genchanges --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2567189 and its subdirectories I: Current time: Fri Oct 31 23:14:23 -12 2025 I: pbuilder-time-stamp: 1761995663 Sat Nov 1 11:14:23 UTC 2025 I: Signing ./b1/libgeo-shapelib-perl_0.22-7_arm64.buildinfo as libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc Sat Nov 1 11:14:23 UTC 2025 I: Signed ./b1/libgeo-shapelib-perl_0.22-7_arm64.buildinfo as ./b1/libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc Sat Nov 1 11:14:23 UTC 2025 - build #1 for libgeo-shapelib-perl/forky/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Sat Nov 1 11:14:23 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-J8dDW8pn, removing. /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Nov 1 11:14 b1 drwxrwxr-x 2 jenkins jenkins 4096 Nov 1 11:14 b2 -rw-rw-r-- 1 jenkins jenkins 2186 Mar 6 2025 libgeo-shapelib-perl_0.22-7.dsc -rw------- 1 jenkins jenkins 3379 Nov 1 11:14 rbuildlog.d9hpvQx /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1: total 160 -rw-r--r-- 1 jenkins jenkins 23920 Nov 1 11:14 build.log -rw-r--r-- 1 jenkins jenkins 68320 Nov 1 11:14 libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb -rw-r--r-- 1 jenkins jenkins 5912 Nov 1 11:14 libgeo-shapelib-perl_0.22-7.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2186 Nov 1 11:14 libgeo-shapelib-perl_0.22-7.dsc -rw-r--r-- 1 jenkins jenkins 4926 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5808 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1611 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.changes -rw-r--r-- 1 jenkins jenkins 32740 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.deb -rw-r--r-- 1 jenkins jenkins 1418 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2: total 0 Sat Nov 1 11:14:23 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 23:14:05 -12 2025 I: pbuilder-time-stamp: 1761995645 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libgeo-shapelib-perl_0.22-7.dsc] I: copying [./libgeo-shapelib-perl_0.22.orig.tar.gz] I: copying [./libgeo-shapelib-perl_0.22-7.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libgeo-shapelib-perl_0.22-7.dsc: no acceptable signature found dpkg-source: info: extracting libgeo-shapelib-perl in libgeo-shapelib-perl-0.22 dpkg-source: info: unpacking libgeo-shapelib-perl_0.22.orig.tar.gz dpkg-source: info: unpacking libgeo-shapelib-perl_0.22-7.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying manpage-has-errors-from-pod2man.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2567189/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='33e1e1e82edc47d19fca5daa9ca01e50' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2567189' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_LtVs --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1 --logfile b1/build.log libgeo-shapelib-perl_0.22-7.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2567189/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libshp-dev, libtree-r-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libshp-dev; however: Package libshp-dev is not installed. pbuilder-satisfydepends-dummy depends on libtree-r-perl; however: Package libtree-r-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libshp-dev{a} libshp4{a} libtool{a} libtree-r-perl{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 11.1 MB of archives. After unpacking 45.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.6+dfsg-0.1 [601 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libshp4 arm64 1.6.2-1 [39.0 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libshp-dev arm64 1.6.2-1 [44.7 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libtree-r-perl all 0.072-3 [8196 B] Fetched 11.1 MB in 0s (146 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.6+dfsg-0.1_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libshp4:arm64. Preparing to unpack .../29-libshp4_1.6.2-1_arm64.deb ... Unpacking libshp4:arm64 (1.6.2-1) ... Selecting previously unselected package libshp-dev:arm64. Preparing to unpack .../30-libshp-dev_1.6.2-1_arm64.deb ... Unpacking libshp-dev:arm64 (1.6.2-1) ... Selecting previously unselected package libtree-r-perl. Preparing to unpack .../31-libtree-r-perl_0.072-3_all.deb ... Unpacking libtree-r-perl (0.072-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libtree-r-perl (0.072-3) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libshp4:arm64 (1.6.2-1) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libshp-dev:arm64 (1.6.2-1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libgeo-shapelib-perl-0.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libgeo-shapelib-perl_0.22-7_source.changes dpkg-buildpackage: info: source package libgeo-shapelib-perl dpkg-buildpackage: info: source version 0.22-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bas Couwenberg dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Geo::Shapelib Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' Running Mkbootstrap for Shapelib () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libgeo-shapelib-perl-0.22/typemap' Shapelib.xs > Shapelib.xsc cp lib/Geo/Shapelib.pm blib/lib/Geo/Shapelib.pm AutoSplitting blib/lib/Geo/Shapelib.pm (blib/lib/auto/Geo/Shapelib) chmod 644 "Shapelib.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 Please specify prototyping behavior for Shapelib.xs (see perlxs manual) mv Shapelib.xsc Shapelib.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/ -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DHAS_SEARCH_DISK_TREE Shapelib.c rm -f blib/arch/auto/Geo/Shapelib/Shapelib.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Shapelib.o -o blib/arch/auto/Geo/Shapelib/Shapelib.so \ -L/usr/lib/aarch64-linux-gnu/ -lshp \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Geo/Shapelib/Shapelib.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00.t .. 1..12 ok 1 - lengths ok 2 - new from data ok 3 - get_record_hashref, 19780202 == 19780202 ok 4 - dump ok 5 - save ok 6 - Rtree ok 7 - Rtree seems to work ok 8 - Quadtree spatial query ok 9 - Create Quadtree index ok 10 - get_record_hashref (unloaded rec) 4235332.51 ~ 4235332.51 ok 11 - save multipart, vertices ok 12 - save multipart, parts ok All tests successful. Files=1, Tests=12, 1 wallclock secs ( 0.00 usr 0.02 sys + 0.34 cusr 0.11 csys = 0.47 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libgeo-shapelib-perl/ make -j12 install DESTDIR=/build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Geo/Shapelib/Shapelib.so Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Geo/Shapelib.pm Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Geo/Shapelib/autosplit.ix Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/share/man/man3/Geo::Shapelib.3pm make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libgeo-shapelib-perl' in '../libgeo-shapelib-perl_0.22-7_arm64.deb'. dpkg-deb: building package 'libgeo-shapelib-perl-dbgsym' in '../libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.buildinfo dpkg-genchanges --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2567189 and its subdirectories I: Current time: Fri Oct 31 23:14:23 -12 2025 I: pbuilder-time-stamp: 1761995663 Sat Nov 1 11:14:24 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Sat Nov 1 11:14:24 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Sat Nov 1 11:14:24 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Sat Nov 1 11:14:24 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-MwrHBK' ==================================================================================== Fri Dec 4 17:37:25 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libgeo-shapelib-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ 0.22-7" as arguments. Fri Dec 4 17:37:25 UTC 2026 - actually running "reproducible_build.sh" (md5sum bcb6fe1b50cf4e8eedacd0971a9eb63f) as "/tmp/jenkins-script-FppwxkGm" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Dec 4 17:37:25 UTC 2026 I: Downloading source for forky/libgeo-shapelib-perl=0.22-7 Reading package lists... NOTICE: 'libgeo-shapelib-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git Please use: git clone https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 128 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (dsc) [2186 B] Get:2 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (tar) [120 kB] Get:3 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (diff) [5912 B] Fetched 128 kB in 0s (6795 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libgeo-shapelib-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git Please use: git clone https://salsa.debian.org/debian-gis-team/libgeo-shapelib-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 128 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (dsc) [2186 B] Get:2 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (tar) [120 kB] Get:3 http://deb.debian.org/debian forky/main libgeo-shapelib-perl 0.22-7 (diff) [5912 B] Fetched 128 kB in 0s (6795 kB/s) Download complete and in download only mode ============================================================================= Re-Building libgeo-shapelib-perl in forky on arm64 on codethink03-arm64 now. Date: Fri Dec 4 17:37:26 GMT 2026 Date UTC: Fri Dec 4 17:37:26 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_XEqH + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libgeo-shapelib-perl = debian-installer -o libgeo-shapelib-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libgeo-shapelib-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_XEqH --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2 --logfile b2/build.log libgeo-shapelib-perl_0.22-7.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Sat Dec 5 07:37:26 +14 2026 I: pbuilder-time-stamp: 1796405846 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libgeo-shapelib-perl_0.22-7.dsc] I: copying [./libgeo-shapelib-perl_0.22.orig.tar.gz] I: copying [./libgeo-shapelib-perl_0.22-7.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libgeo-shapelib-perl_0.22-7.dsc: no acceptable signature found dpkg-source: info: extracting libgeo-shapelib-perl in libgeo-shapelib-perl-0.22 dpkg-source: info: unpacking libgeo-shapelib-perl_0.22.orig.tar.gz dpkg-source: info: unpacking libgeo-shapelib-perl_0.22-7.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying manpage-has-errors-from-pod2man.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 4 17:37 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 nocheck' DIRSTACK=() DISTRIBUTION=forky EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=1c1f85b1cfcc4e9aa7997d5927ecb4de LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2545096 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_XEqH --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2 --logfile b2/build.log libgeo-shapelib-perl_0.22-7.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libshp-dev, libtree-r-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libshp-dev; however: Package libshp-dev is not installed. pbuilder-satisfydepends-dummy depends on libtree-r-perl; however: Package libtree-r-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libshp-dev{a} libshp4{a} libtool{a} libtree-r-perl{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 11.1 MB of archives. After unpacking 45.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.6+dfsg-0.1 [601 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libshp4 arm64 1.6.2-1 [39.0 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libshp-dev arm64 1.6.2-1 [44.7 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libtree-r-perl all 0.072-3 [8196 B] Fetched 11.1 MB in 0s (115 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.6+dfsg-0.1_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libshp4:arm64. Preparing to unpack .../29-libshp4_1.6.2-1_arm64.deb ... Unpacking libshp4:arm64 (1.6.2-1) ... Selecting previously unselected package libshp-dev:arm64. Preparing to unpack .../30-libshp-dev_1.6.2-1_arm64.deb ... Unpacking libshp-dev:arm64 (1.6.2-1) ... Selecting previously unselected package libtree-r-perl. Preparing to unpack .../31-libtree-r-perl_0.072-3_all.deb ... Unpacking libtree-r-perl (0.072-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libtree-r-perl (0.072-3) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libshp4:arm64 (1.6.2-1) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libshp-dev:arm64 (1.6.2-1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for forky I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libgeo-shapelib-perl-0.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libgeo-shapelib-perl_0.22-7_source.changes dpkg-buildpackage: info: source package libgeo-shapelib-perl dpkg-buildpackage: info: source version 0.22-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bas Couwenberg dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Geo::Shapelib Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libgeo-shapelib-perl-0.22/typemap' Shapelib.xs > Shapelib.xsc Running Mkbootstrap for Shapelib () chmod 644 "Shapelib.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 cp lib/Geo/Shapelib.pm blib/lib/Geo/Shapelib.pm AutoSplitting blib/lib/Geo/Shapelib.pm (blib/lib/auto/Geo/Shapelib) Please specify prototyping behavior for Shapelib.xs (see perlxs manual) mv Shapelib.xsc Shapelib.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/ -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DHAS_SEARCH_DISK_TREE Shapelib.c rm -f blib/arch/auto/Geo/Shapelib/Shapelib.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Shapelib.o -o blib/arch/auto/Geo/Shapelib/Shapelib.so \ -L/usr/lib/aarch64-linux-gnu/ -lshp \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Geo/Shapelib/Shapelib.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' dh: command-omitted: The call to "dh_auto_test" was omitted due to "DEB_BUILD_OPTIONS=nocheck" create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libgeo-shapelib-perl/ make -j12 install DESTDIR=/build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Geo/Shapelib/Shapelib.so Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Geo/Shapelib.pm Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Geo/Shapelib/autosplit.ix Installing /build/reproducible-path/libgeo-shapelib-perl-0.22/debian/libgeo-shapelib-perl/usr/share/man/man3/Geo::Shapelib.3pm make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libgeo-shapelib-perl-dbgsym' in '../libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb'. dpkg-deb: building package 'libgeo-shapelib-perl' in '../libgeo-shapelib-perl_0.22-7_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.buildinfo dpkg-genchanges --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2545096 and its subdirectories I: Current time: Sat Dec 5 07:37:49 +14 2026 I: pbuilder-time-stamp: 1796405869 + false + set +x Fri Dec 4 17:37:49 UTC 2026 I: Signing ./b2/libgeo-shapelib-perl_0.22-7_arm64.buildinfo as libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc Fri Dec 4 17:37:49 UTC 2026 I: Signed ./b2/libgeo-shapelib-perl_0.22-7_arm64.buildinfo as ./b2/libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc Fri Dec 4 17:37:49 UTC 2026 - build #2 for libgeo-shapelib-perl/forky/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Fri Dec 4 17:37:49 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-FppwxkGm, removing. /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ: total 40 drwxrwxr-x 2 jenkins jenkins 4096 Nov 1 11:14 b1 drwxrwxr-x 2 jenkins jenkins 4096 Nov 1 11:14 b2 -rw-rw-r-- 1 jenkins jenkins 2186 Mar 6 2025 libgeo-shapelib-perl_0.22-7.dsc -rw------- 1 jenkins jenkins 27600 Nov 1 11:14 rbuildlog.d9hpvQx /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1: total 164 -rw-r--r-- 1 jenkins jenkins 23920 Nov 1 11:14 build.log -rw-r--r-- 1 jenkins jenkins 68320 Nov 1 11:14 libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb -rw-r--r-- 1 jenkins jenkins 5912 Nov 1 11:14 libgeo-shapelib-perl_0.22-7.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2186 Nov 1 11:14 libgeo-shapelib-perl_0.22-7.dsc -rw-r--r-- 1 jenkins jenkins 4926 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5808 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1611 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.changes -rw-r--r-- 1 jenkins jenkins 32740 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.deb -rw-r--r-- 1 jenkins jenkins 1418 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2: total 164 -rw-rw-r-- 1 jenkins jenkins 24987 Nov 1 11:14 build.log -rw-r--r-- 1 jenkins jenkins 68320 Nov 1 11:14 libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb -rw-r--r-- 1 jenkins jenkins 5912 Nov 1 11:14 libgeo-shapelib-perl_0.22-7.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2186 Nov 1 11:14 libgeo-shapelib-perl_0.22-7.dsc -rw-rw-r-- 1 jenkins jenkins 4934 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5816 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 1611 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.changes -rw-r--r-- 1 jenkins jenkins 32740 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_arm64.deb -rw-rw-r-- 1 jenkins jenkins 1418 Nov 1 11:14 libgeo-shapelib-perl_0.22-7_source.changes Sat Nov 1 11:14:50 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Sat Nov 1 11:14:50 UTC 2025 I: libgeo-shapelib-perl_0.22-7_arm64.changes: Format: 1.8 Date: Thu, 06 Mar 2025 19:03:00 +0100 Source: libgeo-shapelib-perl Binary: libgeo-shapelib-perl libgeo-shapelib-perl-dbgsym Architecture: arm64 Version: 0.22-7 Distribution: unstable Urgency: medium Maintainer: Debian GIS Project Changed-By: Bas Couwenberg Description: libgeo-shapelib-perl - Perl extension for reading and writing shapefiles as defined by E Changes: libgeo-shapelib-perl (0.22-7) unstable; urgency=medium . * Team upload. * Enable Salsa CI. * Bump Standards-Version to 4.7.0, no changes. * Bump debhelper compat to 13. * Use autopkgtest-pkg-perl testsuite. Checksums-Sha1: ca0b6d1245f113ab87b0911ac590156b43fdf5d0 68320 libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb c39d25b34d2879218db315dd1df34eda5aeab9d3 4926 libgeo-shapelib-perl_0.22-7_arm64.buildinfo 05824b547854cc6274f55a383cd7a9de84c7faf1 32740 libgeo-shapelib-perl_0.22-7_arm64.deb Checksums-Sha256: a416416c74a81e8bd741b7821f76fbf749ac78c8e76a643a84c85f4b5ea379ed 68320 libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb 4a8a794560b5c9f9e6d29b97280a6ab06311c37b4e5c8ec4c368ff7b35d52388 4926 libgeo-shapelib-perl_0.22-7_arm64.buildinfo 63d4b256b941b68a4507619454f8ffe4b50e4f00d3e92604e9b2e0c421e4021e 32740 libgeo-shapelib-perl_0.22-7_arm64.deb Files: 4c4fcb8c637b5bbc2db54aa14ac90b42 68320 debug optional libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb 8e80331065329a4b341dda58672a5e16 4926 perl optional libgeo-shapelib-perl_0.22-7_arm64.buildinfo 75394941230dc97ae127314300fe58fe 32740 perl optional libgeo-shapelib-perl_0.22-7_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libgeo-shapelib-perl_0.22-7.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libgeo-shapelib-perl_0.22-7.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/forky/arm64/libgeo-shapelib-perl_0.22-7.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/forky/arm64/libgeo-shapelib-perl_0.22-7.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/forky/arm64/libgeo-shapelib-perl_0.22-7_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libgeo-shapelib-perl_0.22-7.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-11-01 11:14:23.742651682 +0000 +++ b2/build.log 2025-11-01 11:14:49.898672245 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Fri Oct 31 23:14:05 -12 2025 -I: pbuilder-time-stamp: 1761995645 +I: Current time: Sat Dec 5 07:37:26 +14 2026 +I: pbuilder-time-stamp: 1796405846 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration @@ -24,53 +24,85 @@ dpkg-source: info: applying manpage-has-errors-from-pod2man.patch I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/2567189/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 4 17:37 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='forky' - HOME='/root' - HOST_ARCH='arm64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 nocheck' + DIRSTACK=() + DISTRIBUTION=forky + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='33e1e1e82edc47d19fca5daa9ca01e50' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='2567189' - PS1='# ' - PS2='> ' + INVOCATION_ID=1c1f85b1cfcc4e9aa7997d5927ecb4de + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2545096 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_LtVs --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1 --logfile b1/build.log libgeo-shapelib-perl_0.22-7.dsc' - SUDO_GID='109' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/pbuilderrc_XEqH --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2 --logfile b2/build.log libgeo-shapelib-perl_0.22-7.dsc' + SUDO_GID=109 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/2567189/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -142,7 +174,7 @@ Get: 30 http://deb.debian.org/debian forky/main arm64 libshp4 arm64 1.6.2-1 [39.0 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libshp-dev arm64 1.6.2-1 [44.7 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libtree-r-perl all 0.072-3 [8196 B] -Fetched 11.1 MB in 0s (146 MB/s) +Fetched 11.1 MB in 0s (115 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) @@ -285,7 +317,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libgeo-shapelib-perl-0.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libgeo-shapelib-perl_0.22-7_source.changes +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for forky +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libgeo-shapelib-perl-0.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libgeo-shapelib-perl_0.22-7_source.changes dpkg-buildpackage: info: source package libgeo-shapelib-perl dpkg-buildpackage: info: source version 0.22-7 dpkg-buildpackage: info: source distribution unstable @@ -309,12 +345,12 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' -Running Mkbootstrap for Shapelib () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libgeo-shapelib-perl-0.22/typemap' Shapelib.xs > Shapelib.xsc -cp lib/Geo/Shapelib.pm blib/lib/Geo/Shapelib.pm -AutoSplitting blib/lib/Geo/Shapelib.pm (blib/lib/auto/Geo/Shapelib) +Running Mkbootstrap for Shapelib () chmod 644 "Shapelib.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 +cp lib/Geo/Shapelib.pm blib/lib/Geo/Shapelib.pm +AutoSplitting blib/lib/Geo/Shapelib.pm (blib/lib/auto/Geo/Shapelib) Please specify prototyping behavior for Shapelib.xs (see perlxs manual) mv Shapelib.xsc Shapelib.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/ -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libgeo-shapelib-perl-0.22=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DHAS_SEARCH_DISK_TREE Shapelib.c @@ -327,30 +363,7 @@ chmod 755 blib/arch/auto/Geo/Shapelib/Shapelib.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' - dh_auto_test - make -j12 test TEST_VERBOSE=1 -make[1]: Entering directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' -"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Shapelib.bs blib/arch/auto/Geo/Shapelib/Shapelib.bs 644 -PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t -t/00.t .. -1..12 -ok 1 - lengths -ok 2 - new from data -ok 3 - get_record_hashref, 19780202 == 19780202 -ok 4 - dump -ok 5 - save -ok 6 - Rtree -ok 7 - Rtree seems to work -ok 8 - Quadtree spatial query -ok 9 - Create Quadtree index -ok 10 - get_record_hashref (unloaded rec) 4235332.51 ~ 4235332.51 -ok 11 - save multipart, vertices -ok 12 - save multipart, parts -ok -All tests successful. -Files=1, Tests=12, 1 wallclock secs ( 0.00 usr 0.02 sys + 0.34 cusr 0.11 csys = 0.47 CPU) -Result: PASS -make[1]: Leaving directory '/build/reproducible-path/libgeo-shapelib-perl-0.22' +dh: command-omitted: The call to "dh_auto_test" was omitted due to "DEB_BUILD_OPTIONS=nocheck" create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libgeo-shapelib-perl/ @@ -385,8 +398,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libgeo-shapelib-perl' in '../libgeo-shapelib-perl_0.22-7_arm64.deb'. dpkg-deb: building package 'libgeo-shapelib-perl-dbgsym' in '../libgeo-shapelib-perl-dbgsym_0.22-7_arm64.deb'. +dpkg-deb: building package 'libgeo-shapelib-perl' in '../libgeo-shapelib-perl_0.22-7_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.buildinfo dpkg-genchanges --build=binary -O../libgeo-shapelib-perl_0.22-7_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -394,12 +407,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2545096/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/2567189 and its subdirectories -I: Current time: Fri Oct 31 23:14:23 -12 2025 -I: pbuilder-time-stamp: 1761995663 +I: removing directory /srv/workspace/pbuilder/2545096 and its subdirectories +I: Current time: Sat Dec 5 07:37:49 +14 2026 +I: pbuilder-time-stamp: 1796405869 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libgeo-shapelib-perl_0.22-7.diff: 66.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libgeo-shapelib-perl_0.22-7.diff.gz b2/build.log: 74.1% -- replaced with stdout Compressing the 1st log... b1/build.log: 74.4% -- replaced with stdout Sat Nov 1 11:14:51 UTC 2025 I: diffoscope 307 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libgeo-shapelib-perl_forky_arm64_1761995691 + touch /var/log/reproducible-builds/diffoscope_stamp_libgeo-shapelib-perl_forky_arm64_1761995691 + RESULT=0 + systemd-run '--description=diffoscope on libgeo-shapelib-perl/0.22-7 in forky/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_7-103012 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ --run-session -c jenkins-reproducible-forky-diffoscope-175c2c92-b64b-451f-a4d8-40db01b8460a -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/dbd-tmp-EkNYCjd ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/libgeo-shapelib-perl_0.22-7.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/libgeo-shapelib-perl_0.22-7.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/libgeo-shapelib-perl_0.22-7.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1/libgeo-shapelib-perl_0.22-7_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2/libgeo-shapelib-perl_0.22-7_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_7-103012.service; invocation ID: 96cf6551a4174568acee3b8ab28d3141 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/libgeo-shapelib-perl_0.22-7.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/libgeo-shapelib-perl_0.22-7.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/libgeo-shapelib-perl_0.22-7.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b1/libgeo-shapelib-perl_0.22-7_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.8V4jaYgZ/b2/libgeo-shapelib-perl_0.22-7_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 212ms CPU time consumed: 168ms Memory peak: 17.7M (swap: 0B) _ _ _ _ _ _ _ | (_) |__ __ _ ___ ___ ___| |__ __ _ _ __ ___| (_) |__ | | | '_ \ / _` |/ _ \/ _ \ _____/ __| '_ \ / _` | '_ \ / _ \ | | '_ \ _____ | | | |_) | (_| | __/ (_) |_____\__ \ | | | (_| | |_) | __/ | | |_) |_____| |_|_|_.__/ \__, |\___|\___/ |___/_| |_|\__,_| .__/ \___|_|_|_.__/ |___/ |_| _ _ __ ___ _ __| | | '_ \ / _ \ '__| | | |_) | __/ | | | | .__/ \___|_| |_| |_| Sat Nov 1 11:14:51 UTC 2025 I: diffoscope 307 found no differences in the changes files, and a .buildinfo file also exists. Sat Nov 1 11:14:51 UTC 2025 I: libgeo-shapelib-perl from forky built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-11-01 11:14:52] INFO: Starting at 2025-11-01 11:14:52.034190 [2025-11-01 11:14:52] INFO: Generating the pages of 1 package(s) [2025-11-01 11:14:52] CRITICAL: https://tests.reproducible-builds.org/debian/forky/arm64/libgeo-shapelib-perl didn't produce a buildlog, even though it has been built. [2025-11-01 11:14:52] INFO: Finished at 2025-11-01 11:14:52.289371, took: 0:00:00.255184 Sat Nov 1 11:14:52 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/forky/arm64/libgeo-shapelib-perl.html Sat Nov 1 11:14:52 UTC 2025 I: Removing signed libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc files: removed './b1/libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc' removed './b2/libgeo-shapelib-perl_0.22-7_arm64.buildinfo.asc' 1761995692 arm64 forky libgeo-shapelib-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libgeo-shapelib-perl_0.22-7.rbuild.log: 71.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libgeo-shapelib-perl_0.22-7.rbuild.log.gz [2025-11-01 11:14:52] INFO: Starting at 2025-11-01 11:14:52.621909 [2025-11-01 11:14:52] INFO: Generating the pages of 1 package(s) [2025-11-01 11:14:52] INFO: Finished at 2025-11-01 11:14:52.897956, took: 0:00:00.276052 All cleanup done. Sat Nov 1 11:14:52 UTC 2025 - total duration: 0h 0m 53s. Sat Nov 1 11:14:52 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-W30LkWCR, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 54.820s CPU time consumed: 3.090s Memory peak: 38.8M (swap: 0B)