Running as unit: rb-build-arm64_7-37645.service ==================================================================================== Fri Sep 27 08:30:45 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_7) on jenkins, called using "codethink02-arm64 codethink03-arm64" as arguments. Fri Sep 27 08:30:45 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-8zeJHu0u" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 27 08:30:45 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Fri Sep 27 08:30:45 UTC 2024 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-7flASS' Fri Sep 27 08:30:46 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Sep 27 08:30:46 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-Z96I3y' ok, let's check if libwant-perl is building anywhere yet… ok, libwant-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libwant-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink02-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Sep 27 08:30:53 UTC 2024 I: starting to build libwant-perl/trixie/arm64 on jenkins on '2024-09-27 08:30' Fri Sep 27 08:30:53 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_7/37645/console.log 1727425853 arm64 trixie libwant-perl Fri Sep 27 08:30:53 UTC 2024 I: Downloading source for trixie/libwant-perl=0.29-2 --2024-09-27 08:30:54-- http://deb.debian.org/debian/pool/main/libw/libwant-perl/libwant-perl_0.29-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2107 (2.1K) [text/prs.lines.tag] Saving to: ‘libwant-perl_0.29-2.dsc’ 0K .. 100% 287M=0s 2024-09-27 08:30:54 (287 MB/s) - ‘libwant-perl_0.29-2.dsc’ saved [2107/2107] --2024-09-27 08:30:54-- http://deb.debian.org/debian/pool/main/libw/libwant-perl/libwant-perl_0.29-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2107 (2.1K) [text/prs.lines.tag] Saving to: ‘libwant-perl_0.29-2.dsc’ 0K .. 100% 287M=0s 2024-09-27 08:30:54 (287 MB/s) - ‘libwant-perl_0.29-2.dsc’ saved [2107/2107] Fri Sep 27 08:30:54 UTC 2024 I: libwant-perl_0.29-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libwant-perl Binary: libwant-perl Architecture: any Version: 0.29-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Ansgar Burchardt , Florian Schlichting Homepage: https://metacpan.org/release/Want Standards-Version: 3.9.7 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libwant-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl:native Package-List: libwant-perl deb perl optional arch=any Checksums-Sha1: 8b6ad919e051a28112a031595e8c273b7107351f 20928 libwant-perl_0.29.orig.tar.gz 8483ff499d01896d07cd5a17be7e7ae3da096f37 2836 libwant-perl_0.29-2.debian.tar.xz Checksums-Sha256: b4e4740b8d4cb783591273c636bd68304892e28d89e88abf9273b1de17f552f7 20928 libwant-perl_0.29.orig.tar.gz 31dcf4e35020661ca423e6fd15cad0d807bb001b6fbd8f5530a726b155b36806 2836 libwant-perl_0.29-2.debian.tar.xz Files: 33b2dae5db59781b9a0434fa1db04aab 20928 libwant-perl_0.29.orig.tar.gz 18dc88eca186ff2472d22ee15c40d546 2836 libwant-perl_0.29-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmK7busACgkQV5wWDUye I+hn8A//e4FlnAI8RyGR/2zb78rN2dup+js2D6MyCkIZ6ssnmSNVpZ9C3xZD8BdJ /ee0nfE50E8afMNspqBDhxN7LkiPNjF61npak/k0oIv2a4fWm3b07OFyQFoNpgbq 0o3xiN3/oPCjrueP3zX7KQ1ay/h45k8h8w1SvMf+clruGXGkC2p7ZT/IbVDf8B8X gEi0Mft7UpjKN1owHmOONJuckkCt91WhCmISqHepxFmjnI/R4CPA6Od9izDIH0kt NzVpIuTbffQJLSHupDHCKVvomhj7tmiKa9J7YDNy0cs/GFj5DS63wpakWozjIEeQ 9Ma7X5RhjBjNjm+T6ImF0NuufWo1jhMUwXenEBmgjuctGfPWNwLfpTnKAmoyVzxI /jBAmYF1VDs+RFE9fv+fWul/3lvWhgLyu51r+ftUGLQqskRXImLGyawJPoTjYH0B KlFWS0fQ25FD2ZOgm8S3EnUBovwtB/lsc/B2ZNiPru6mqosZlSlyNJgaobtkmxgv GBcfMCRm5oMR8FH8LZP1IJVaNkUidK09H92unOG924q0L12doipJM0K88z7N5uxS 9PhK1Q6J3s+jv3JjVkFidKwIPR+iOcHR/zg7wISRAxpGVyMdptHouw+lO02GD6El YUgsEFHPo18XX/TG9QlTP0skcvviTydd1nXlt3BRl7sGVmhzrLQ= =80kt -----END PGP SIGNATURE----- Fri Sep 27 08:30:54 UTC 2024 I: Checking whether the package is not for us Fri Sep 27 08:30:54 UTC 2024 I: Starting 1st build on remote node codethink02-arm64.debian.net. Fri Sep 27 08:30:54 UTC 2024 I: Preparing to do remote build '1' on codethink02-arm64.debian.net. Fri Sep 27 08:30:54 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Fri Sep 27 08:30:54 UTC 2024 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-jjL4Sp' ==================================================================================== Fri Sep 27 08:30:56 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink02-arm64, called using "1 libwant-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w 0.29-2" as arguments. Fri Sep 27 08:30:56 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-gjnBb2tA" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 27 08:30:56 UTC 2024 I: Downloading source for trixie/libwant-perl=0.29-2 Reading package lists... NOTICE: 'libwant-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (dsc) [2107 B] Get:2 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (tar) [20.9 kB] Get:3 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (diff) [2836 B] Fetched 25.9 kB in 0s (423 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libwant-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (dsc) [2107 B] Get:2 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (tar) [20.9 kB] Get:3 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (diff) [2836 B] Fetched 25.9 kB in 0s (423 kB/s) Download complete and in download only mode ============================================================================= Building libwant-perl in trixie on arm64 on codethink02-arm64 now. Date: Fri Sep 27 09:30:56 BST 2024 Date UTC: Fri Sep 27 08:30:56 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 26 20:30:56 -12 2024 I: pbuilder-time-stamp: 1727425856 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libwant-perl_0.29-2.dsc] I: copying [./libwant-perl_0.29.orig.tar.gz] I: copying [./libwant-perl_0.29-2.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Jun 28 21:13:15 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libwant-perl_0.29-2.dsc: no acceptable signature found dpkg-source: info: extracting libwant-perl in libwant-perl-0.29 dpkg-source: info: unpacking libwant-perl_0.29.orig.tar.gz dpkg-source: info: unpacking libwant-perl_0.29-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2483199/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='887d8488e18a4d30921dd32231ae4896' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2483199' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_v1Ak --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1 --logfile b1/build.log libwant-perl_0.29-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2483199/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-8 [96.6 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] Fetched 20.4 MB in 0s (90.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_arm64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-2_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5_arm64.deb ... Unpacking libicu72:arm64 (72.1-5) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.38.2-5_arm64.deb ... Unpacking libperl-dev:arm64 (5.38.2-5) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.38.2-5) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libwant-perl-0.29/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libwant-perl_0.29-2_source.changes dpkg-buildpackage: info: source package libwant-perl dpkg-buildpackage: info: source version 0.29-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Want Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' Running Mkbootstrap for Want () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Want.xs > Want.xsc cp Want.pm blib/lib/Want.pm chmod 644 "Want.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 mv Want.xsc Want.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.29\" -DXS_VERSION=\"0.29\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Want.c Want.xs: In function 'XS_Want_parent_op_name': Want.xs:549:5: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 549 | if (GIMME == G_ARRAY) { | ^~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:6188, from Want.xs:2: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Want/Want.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong Want.o -o blib/arch/auto/Want/Want.so \ \ chmod 755 blib/arch/auto/Want/Want.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t ....... 1..72 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 # Not a real test ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 # rreturn in scalar context (c) ok 72 # rreturn in list context (a:b:c) ok t/assign.t .... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/boolean.t ... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/damian.t .... 1..26 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok t/err.t ....... 1..3 ok 1 ok 2 ok 3 ok t/methcall.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok t/object.t .... 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/threads.t ... 1..1 ok 1 - No destruct error ok All tests successful. Files=8, Tests=148, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.13 cusr 0.01 csys = 0.19 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libwant-perl/ make -j12 install DESTDIR=/build/reproducible-path/libwant-perl-0.29/debian/libwant-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/auto/Want/Want.so Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/Want.pm Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/share/man/man3/Want.3pm make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libwant-perl-dbgsym' in '../libwant-perl-dbgsym_0.29-2_arm64.deb'. dpkg-deb: building package 'libwant-perl' in '../libwant-perl_0.29-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libwant-perl_0.29-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libwant-perl_0.29-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2483199 and its subdirectories I: Current time: Thu Sep 26 20:31:34 -12 2024 I: pbuilder-time-stamp: 1727425894 Fri Sep 27 08:31:34 UTC 2024 I: Signing ./b1/libwant-perl_0.29-2_arm64.buildinfo as libwant-perl_0.29-2_arm64.buildinfo.asc Fri Sep 27 08:31:34 UTC 2024 I: Signed ./b1/libwant-perl_0.29-2_arm64.buildinfo as ./b1/libwant-perl_0.29-2_arm64.buildinfo.asc Fri Sep 27 08:31:34 UTC 2024 - build #1 for libwant-perl/trixie/arm64 on codethink02-arm64 done. Starting cleanup. All cleanup done. Fri Sep 27 08:31:34 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-gjnBb2tA, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 08:31 b1 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 08:30 b2 -rw-r--r-- 1 jenkins jenkins 2107 Jun 28 2022 libwant-perl_0.29-2.dsc -rw------- 1 jenkins jenkins 3245 Sep 27 08:30 rbuildlog.XD0bDca /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1: total 128 -rw-r--r-- 1 jenkins jenkins 23315 Sep 27 08:31 build.log -rw-r--r-- 1 jenkins jenkins 44140 Sep 27 08:31 libwant-perl-dbgsym_0.29-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2836 Sep 27 08:31 libwant-perl_0.29-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2107 Sep 27 08:31 libwant-perl_0.29-2.dsc -rw-r--r-- 1 jenkins jenkins 4906 Sep 27 08:31 libwant-perl_0.29-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5788 Sep 27 08:31 libwant-perl_0.29-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1880 Sep 27 08:31 libwant-perl_0.29-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 27008 Sep 27 08:31 libwant-perl_0.29-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1749 Sep 27 08:31 libwant-perl_0.29-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2: total 0 Fri Sep 27 08:31:36 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 26 20:30:56 -12 2024 I: pbuilder-time-stamp: 1727425856 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libwant-perl_0.29-2.dsc] I: copying [./libwant-perl_0.29.orig.tar.gz] I: copying [./libwant-perl_0.29-2.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Jun 28 21:13:15 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libwant-perl_0.29-2.dsc: no acceptable signature found dpkg-source: info: extracting libwant-perl in libwant-perl-0.29 dpkg-source: info: unpacking libwant-perl_0.29.orig.tar.gz dpkg-source: info: unpacking libwant-perl_0.29-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2483199/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='887d8488e18a4d30921dd32231ae4896' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='2483199' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_v1Ak --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1 --logfile b1/build.log libwant-perl_0.29-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2483199/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-8 [96.6 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] Fetched 20.4 MB in 0s (90.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_arm64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-2_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5_arm64.deb ... Unpacking libicu72:arm64 (72.1-5) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.38.2-5_arm64.deb ... Unpacking libperl-dev:arm64 (5.38.2-5) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.38.2-5) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libwant-perl-0.29/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libwant-perl_0.29-2_source.changes dpkg-buildpackage: info: source package libwant-perl dpkg-buildpackage: info: source version 0.29-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Want Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' Running Mkbootstrap for Want () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Want.xs > Want.xsc cp Want.pm blib/lib/Want.pm chmod 644 "Want.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 mv Want.xsc Want.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.29\" -DXS_VERSION=\"0.29\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Want.c Want.xs: In function 'XS_Want_parent_op_name': Want.xs:549:5: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 549 | if (GIMME == G_ARRAY) { | ^~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:6188, from Want.xs:2: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Want/Want.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong Want.o -o blib/arch/auto/Want/Want.so \ \ chmod 755 blib/arch/auto/Want/Want.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t ....... 1..72 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 # Not a real test ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 # rreturn in scalar context (c) ok 72 # rreturn in list context (a:b:c) ok t/assign.t .... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/boolean.t ... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/damian.t .... 1..26 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok t/err.t ....... 1..3 ok 1 ok 2 ok 3 ok t/methcall.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok t/object.t .... 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/threads.t ... 1..1 ok 1 - No destruct error ok All tests successful. Files=8, Tests=148, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.13 cusr 0.01 csys = 0.19 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libwant-perl/ make -j12 install DESTDIR=/build/reproducible-path/libwant-perl-0.29/debian/libwant-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/auto/Want/Want.so Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/Want.pm Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/share/man/man3/Want.3pm make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libwant-perl-dbgsym' in '../libwant-perl-dbgsym_0.29-2_arm64.deb'. dpkg-deb: building package 'libwant-perl' in '../libwant-perl_0.29-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libwant-perl_0.29-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libwant-perl_0.29-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2483199 and its subdirectories I: Current time: Thu Sep 26 20:31:34 -12 2024 I: pbuilder-time-stamp: 1727425894 Fri Sep 27 08:31:37 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Sep 27 08:31:37 UTC 2024 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Sep 27 08:31:37 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Sep 27 08:31:37 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-5lZ1Ml' ==================================================================================== Thu Oct 30 14:54:37 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libwant-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w 0.29-2" as arguments. Thu Oct 30 14:54:37 UTC 2025 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-fZLYLmGJ" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Oct 30 14:54:37 UTC 2025 I: Downloading source for trixie/libwant-perl=0.29-2 Reading package lists... NOTICE: 'libwant-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (dsc) [2107 B] Get:2 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (tar) [20.9 kB] Get:3 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (diff) [2836 B] Fetched 25.9 kB in 0s (1500 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libwant-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libwant-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (dsc) [2107 B] Get:2 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (tar) [20.9 kB] Get:3 http://deb.debian.org/debian trixie/main libwant-perl 0.29-2 (diff) [2836 B] Fetched 25.9 kB in 0s (1500 kB/s) Download complete and in download only mode ============================================================================= Re-Building libwant-perl in trixie on arm64 on codethink03-arm64 now. Date: Thu Oct 30 14:54:37 GMT 2025 Date UTC: Thu Oct 30 14:54:37 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_zfnv + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libwant-perl = debian-installer -o libwant-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libwant-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_zfnv --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2 --logfile b2/build.log libwant-perl_0.29-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 04:54:37 +14 2025 I: pbuilder-time-stamp: 1761836077 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libwant-perl_0.29-2.dsc] I: copying [./libwant-perl_0.29.orig.tar.gz] I: copying [./libwant-perl_0.29-2.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Jun 28 21:13:15 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libwant-perl_0.29-2.dsc: no acceptable signature found dpkg-source: info: extracting libwant-perl in libwant-perl-0.29 dpkg-source: info: unpacking libwant-perl_0.29.orig.tar.gz dpkg-source: info: unpacking libwant-perl_0.29-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Oct 30 14:54 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=e307257bb3aa423381b91135350d616d LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1876061 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_zfnv --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2 --logfile b2/build.log libwant-perl_0.29-2.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-8 [96.6 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] Fetched 20.4 MB in 0s (148 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_arm64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-2_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5_arm64.deb ... Unpacking libicu72:arm64 (72.1-5) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.38.2-5_arm64.deb ... Unpacking libperl-dev:arm64 (5.38.2-5) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.38.2-5) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libwant-perl-0.29/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libwant-perl_0.29-2_source.changes dpkg-buildpackage: info: source package libwant-perl dpkg-buildpackage: info: source version 0.29-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Want Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' Running Mkbootstrap for Want () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Want.xs > Want.xsc chmod 644 "Want.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 cp Want.pm blib/lib/Want.pm mv Want.xsc Want.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.29\" -DXS_VERSION=\"0.29\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Want.c Want.xs: In function 'XS_Want_parent_op_name': Want.xs:549:5: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 549 | if (GIMME == G_ARRAY) { | ^~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:6188, from Want.xs:2: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Want/Want.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong Want.o -o blib/arch/auto/Want/Want.so \ \ chmod 755 blib/arch/auto/Want/Want.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all.t ....... 1..72 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 # Not a real test ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 # rreturn in scalar context (c) ok 72 # rreturn in list context (a:b:c) ok t/assign.t .... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/boolean.t ... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/damian.t .... 1..26 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok t/err.t ....... 1..3 ok 1 ok 2 ok 3 ok t/methcall.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok t/object.t .... 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/threads.t ... 1..1 ok 1 - No destruct error ok All tests successful. Files=8, Tests=148, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.24 cusr 0.06 csys = 0.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libwant-perl/ make -j12 install DESTDIR=/build/reproducible-path/libwant-perl-0.29/debian/libwant-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/auto/Want/Want.so Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/Want.pm Installing /build/reproducible-path/libwant-perl-0.29/debian/libwant-perl/usr/share/man/man3/Want.3pm make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libwant-perl' in '../libwant-perl_0.29-2_arm64.deb'. dpkg-deb: building package 'libwant-perl-dbgsym' in '../libwant-perl-dbgsym_0.29-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libwant-perl_0.29-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libwant-perl_0.29-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1876061 and its subdirectories I: Current time: Fri Oct 31 04:55:07 +14 2025 I: pbuilder-time-stamp: 1761836107 + false + set +x Thu Oct 30 14:55:07 UTC 2025 I: Signing ./b2/libwant-perl_0.29-2_arm64.buildinfo as libwant-perl_0.29-2_arm64.buildinfo.asc Thu Oct 30 14:55:07 UTC 2025 I: Signed ./b2/libwant-perl_0.29-2_arm64.buildinfo as ./b2/libwant-perl_0.29-2_arm64.buildinfo.asc Thu Oct 30 14:55:07 UTC 2025 - build #2 for libwant-perl/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu Oct 30 14:55:07 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-fZLYLmGJ, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 08:31 b1 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 08:32 b2 -rw-r--r-- 1 jenkins jenkins 2107 Jun 28 2022 libwant-perl_0.29-2.dsc -rw------- 1 jenkins jenkins 26861 Sep 27 08:31 rbuildlog.XD0bDca /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1: total 128 -rw-r--r-- 1 jenkins jenkins 23315 Sep 27 08:31 build.log -rw-r--r-- 1 jenkins jenkins 44140 Sep 27 08:31 libwant-perl-dbgsym_0.29-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2836 Sep 27 08:31 libwant-perl_0.29-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2107 Sep 27 08:31 libwant-perl_0.29-2.dsc -rw-r--r-- 1 jenkins jenkins 4906 Sep 27 08:31 libwant-perl_0.29-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5788 Sep 27 08:31 libwant-perl_0.29-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1880 Sep 27 08:31 libwant-perl_0.29-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 27008 Sep 27 08:31 libwant-perl_0.29-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1749 Sep 27 08:31 libwant-perl_0.29-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2: total 132 -rw-r--r-- 1 jenkins jenkins 25257 Sep 27 08:32 build.log -rw-r--r-- 1 jenkins jenkins 44140 Sep 27 08:32 libwant-perl-dbgsym_0.29-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2836 Sep 27 08:32 libwant-perl_0.29-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2107 Sep 27 08:32 libwant-perl_0.29-2.dsc -rw-r--r-- 1 jenkins jenkins 4906 Sep 27 08:32 libwant-perl_0.29-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5788 Sep 27 08:32 libwant-perl_0.29-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1880 Sep 27 08:32 libwant-perl_0.29-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 27008 Sep 27 08:32 libwant-perl_0.29-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1749 Sep 27 08:32 libwant-perl_0.29-2_source.changes Fri Sep 27 08:32:10 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Sep 27 08:32:10 UTC 2024 I: libwant-perl_0.29-2_arm64.changes: Format: 1.8 Date: Tue, 28 Jun 2022 22:12:39 +0100 Source: libwant-perl Binary: libwant-perl libwant-perl-dbgsym Architecture: arm64 Version: 0.29-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libwant-perl - generalisation of wantarray Changes: libwant-perl (0.29-2) unstable; urgency=medium . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Trim trailing whitespace. * Bump debhelper from old 9 to 12. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). Checksums-Sha1: c768960fea1476184fce950a55f35fda310d388e 44140 libwant-perl-dbgsym_0.29-2_arm64.deb d5e9f7697de48554c3537cb3572034418814f2d5 4906 libwant-perl_0.29-2_arm64.buildinfo 21218b4df66d55c752cae382bea92e4f5afec2b7 27008 libwant-perl_0.29-2_arm64.deb Checksums-Sha256: 3a6bee2f48e30c4097084000c7f8d082cd7517692a0625dacd1f37f611772f45 44140 libwant-perl-dbgsym_0.29-2_arm64.deb 37f88d6f4480a636a88879822242c5e451b922113494a182836efdd0c2a101bf 4906 libwant-perl_0.29-2_arm64.buildinfo 3e1385d667774f41cf377630e7f4f64d9dd3d8573ca3a6f83c531ca84e5dc97b 27008 libwant-perl_0.29-2_arm64.deb Files: 357e5d4b58a9db81b7f074330ada43b2 44140 debug optional libwant-perl-dbgsym_0.29-2_arm64.deb da55258264647f3ca70b6e01380f6719 4906 perl optional libwant-perl_0.29-2_arm64.buildinfo 05b19a535cf18ea1bd6df2ff5316b5a2 27008 perl optional libwant-perl_0.29-2_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libwant-perl_0.29-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libwant-perl_0.29-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libwant-perl_0.29-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libwant-perl_0.29-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libwant-perl_0.29-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libwant-perl_0.29-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-09-27 08:31:36.220123496 +0000 +++ b2/build.log 2024-09-27 08:32:10.090683442 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Sep 26 20:30:56 -12 2024 -I: pbuilder-time-stamp: 1727425856 +I: Current time: Fri Oct 31 04:54:37 +14 2025 +I: pbuilder-time-stamp: 1761836077 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -25,52 +25,84 @@ dpkg-source: info: unpacking libwant-perl_0.29-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/2483199/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Oct 30 14:54 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='887d8488e18a4d30921dd32231ae4896' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='2483199' - PS1='# ' - PS2='> ' + INVOCATION_ID=e307257bb3aa423381b91135350d616d + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1876061 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_v1Ak --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1 --logfile b1/build.log libwant-perl_0.29-2.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/pbuilderrc_zfnv --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2 --logfile b2/build.log libwant-perl_0.29-2.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink02-arm64 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/2483199/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -139,7 +171,7 @@ Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] -Fetched 20.4 MB in 0s (90.0 MB/s) +Fetched 20.4 MB in 0s (148 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) @@ -279,7 +311,11 @@ fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libwant-perl-0.29/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libwant-perl_0.29-2_source.changes +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libwant-perl-0.29/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libwant-perl_0.29-2_source.changes dpkg-buildpackage: info: source package libwant-perl dpkg-buildpackage: info: source version 0.29-2 dpkg-buildpackage: info: source distribution unstable @@ -305,9 +341,9 @@ make[1]: Entering directory '/build/reproducible-path/libwant-perl-0.29' Running Mkbootstrap for Want () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Want.xs > Want.xsc -cp Want.pm blib/lib/Want.pm chmod 644 "Want.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Want.bs blib/arch/auto/Want/Want.bs 644 +cp Want.pm blib/lib/Want.pm mv Want.xsc Want.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libwant-perl-0.29=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.29\" -DXS_VERSION=\"0.29\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Want.c Want.xs: In function 'XS_Want_parent_op_name': @@ -504,7 +540,7 @@ ok 1 - No destruct error ok All tests successful. -Files=8, Tests=148, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.13 cusr 0.01 csys = 0.19 CPU) +Files=8, Tests=148, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.24 cusr 0.06 csys = 0.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libwant-perl-0.29' create-stamp debian/debhelper-build-stamp @@ -543,8 +579,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libwant-perl-dbgsym' in '../libwant-perl-dbgsym_0.29-2_arm64.deb'. dpkg-deb: building package 'libwant-perl' in '../libwant-perl_0.29-2_arm64.deb'. +dpkg-deb: building package 'libwant-perl-dbgsym' in '../libwant-perl-dbgsym_0.29-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libwant-perl_0.29-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libwant-perl_0.29-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -552,12 +588,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1876061/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/2483199 and its subdirectories -I: Current time: Thu Sep 26 20:31:34 -12 2024 -I: pbuilder-time-stamp: 1727425894 +I: removing directory /srv/workspace/pbuilder/1876061 and its subdirectories +I: Current time: Fri Oct 31 04:55:07 +14 2025 +I: pbuilder-time-stamp: 1761836107 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libwant-perl_0.29-2.diff: 65.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libwant-perl_0.29-2.diff.gz b2/build.log: 72.8% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.4% -- replaced with stdout Fri Sep 27 08:32:12 UTC 2024 I: diffoscope 277 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libwant-perl_trixie_arm64_1727425932 + touch /var/log/reproducible-builds/diffoscope_stamp_libwant-perl_trixie_arm64_1727425932 + RESULT=0 + systemd-run '--description=diffoscope on libwant-perl/0.29-2 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_7-37645 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w --run-session -c jenkins-reproducible-trixie-diffoscope-0b742c53-fe36-4b95-9b24-18dfe45ac3fe -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/dbd-tmp-md4GiK0 ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/libwant-perl_0.29-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/libwant-perl_0.29-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/libwant-perl_0.29-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1/libwant-perl_0.29-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2/libwant-perl_0.29-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_7-37645.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/libwant-perl_0.29-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/libwant-perl_0.29-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/libwant-perl_0.29-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b1/libwant-perl_0.29-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.Adomja8w/b2/libwant-perl_0.29-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.392s) 0.392s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 733ms CPU time consumed: 733ms _ _ _ _ _ | (_) |____ ____ _ _ __ | |_ _ __ ___ _ __| | | | | '_ \ \ /\ / / _` | '_ \| __|____| '_ \ / _ \ '__| | | | | |_) \ V V / (_| | | | | ||_____| |_) | __/ | | | |_|_|_.__/ \_/\_/ \__,_|_| |_|\__| | .__/ \___|_| |_| |_| Fri Sep 27 08:32:13 UTC 2024 I: diffoscope 277 found no differences in the changes files, and a .buildinfo file also exists. Fri Sep 27 08:32:13 UTC 2024 I: libwant-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-09-27 08:32:13] INFO: Starting at 2024-09-27 08:32:13.744995 [2024-09-27 08:32:13] INFO: Generating the pages of 1 package(s) [2024-09-27 08:32:14] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libwant-perl didn't produce a buildlog, even though it has been built. [2024-09-27 08:32:14] INFO: Finished at 2024-09-27 08:32:14.236617, took: 0:00:00.491627 Fri Sep 27 08:32:14 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libwant-perl.html Fri Sep 27 08:32:14 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Sep 27 08:32:14 UTC 2024 I: Submitting 8.0K b1/libwant-perl_0.29-2_arm64.buildinfo.asc https://buildinfo.debian.net/d5e9f7697de48554c3537cb3572034418814f2d5/libwant-perl_0.29-2_arm64 Fri Sep 27 08:32:15 UTC 2024 I: Submitting 8.0K b2/libwant-perl_0.29-2_arm64.buildinfo.asc https://buildinfo.debian.net/1b18e3e4795fcd745fc18358dc32c7ad92227ba1/libwant-perl_0.29-2_arm64 Fri Sep 27 08:32:15 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Sep 27 08:32:15 UTC 2024 I: Done submitting .buildinfo files. Fri Sep 27 08:32:15 UTC 2024 I: Removing signed libwant-perl_0.29-2_arm64.buildinfo.asc files: removed './b1/libwant-perl_0.29-2_arm64.buildinfo.asc' removed './b2/libwant-perl_0.29-2_arm64.buildinfo.asc' 1727425935 arm64 trixie libwant-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libwant-perl_0.29-2.rbuild.log: 70.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libwant-perl_0.29-2.rbuild.log.gz [2024-09-27 08:32:16] INFO: Starting at 2024-09-27 08:32:16.296733 [2024-09-27 08:32:16] INFO: Generating the pages of 1 package(s) [2024-09-27 08:32:16] INFO: Finished at 2024-09-27 08:32:16.995738, took: 0:00:00.699015 All cleanup done. Fri Sep 27 08:32:17 UTC 2024 - total duration: 0h 1m 28s. Fri Sep 27 08:32:17 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-8zeJHu0u, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 31.902s CPU time consumed: 8.553s