Running as unit: rb-build-arm64_7-37649.service ==================================================================================== Fri Sep 27 09:11:28 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_7) on jenkins, called using "codethink02-arm64 codethink03-arm64" as arguments. Fri Sep 27 09:11:28 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-aWnT4kM4" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 27 09:11:28 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Fri Sep 27 09:11:28 UTC 2024 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-5jpLPX' Fri Sep 27 09:11:29 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Sep 27 09:11:29 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-88JLX6' ok, let's check if libdevel-callsite-perl is building anywhere yet… ok, libdevel-callsite-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libdevel-callsite-perl in trixie on arm64 on jenkins now. 1st build will be done on codethink02-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Sep 27 09:11:38 UTC 2024 I: starting to build libdevel-callsite-perl/trixie/arm64 on jenkins on '2024-09-27 09:11' Fri Sep 27 09:11:38 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_7/37649/console.log 1727428298 arm64 trixie libdevel-callsite-perl Fri Sep 27 09:11:38 UTC 2024 I: Downloading source for trixie/libdevel-callsite-perl=1.0.1-2 --2024-09-27 09:11:38-- http://deb.debian.org/debian/pool/main/libd/libdevel-callsite-perl/libdevel-callsite-perl_1.0.1-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2420 (2.4K) [text/prs.lines.tag] Saving to: ‘libdevel-callsite-perl_1.0.1-2.dsc’ 0K .. 100% 298M=0s 2024-09-27 09:11:38 (298 MB/s) - ‘libdevel-callsite-perl_1.0.1-2.dsc’ saved [2420/2420] --2024-09-27 09:11:38-- http://deb.debian.org/debian/pool/main/libd/libdevel-callsite-perl/libdevel-callsite-perl_1.0.1-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2420 (2.4K) [text/prs.lines.tag] Saving to: ‘libdevel-callsite-perl_1.0.1-2.dsc’ 0K .. 100% 298M=0s 2024-09-27 09:11:38 (298 MB/s) - ‘libdevel-callsite-perl_1.0.1-2.dsc’ saved [2420/2420] Fri Sep 27 09:11:38 UTC 2024 I: libdevel-callsite-perl_1.0.1-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdevel-callsite-perl Binary: libdevel-callsite-perl Architecture: any Version: 1.0.1-2 Maintainer: Debian Perl Group Uploaders: Salvatore Bonaccorso Homepage: https://metacpan.org/release/Devel-Callsite Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl:native Package-List: libdevel-callsite-perl deb perl optional arch=any Checksums-Sha1: 8366705640728e0fabc01651a965b0275c4cb661 63972 libdevel-callsite-perl_1.0.1.orig.tar.gz e470be3c0bce379e92f25b79ac59db730237917e 2520 libdevel-callsite-perl_1.0.1-2.debian.tar.xz Checksums-Sha256: 766728bfc1456fd348d7224a06a2f040a2120a009e8420246860ad492bb37772 63972 libdevel-callsite-perl_1.0.1.orig.tar.gz fbc9742dddcf1c151ee33cb9c7882993b857f117b27975be22b1c81bf62c987d 2520 libdevel-callsite-perl_1.0.1-2.debian.tar.xz Files: b6c66004fb97fd9304f4d8832c8d521c 63972 libdevel-callsite-perl_1.0.1.orig.tar.gz daa19caf3417703151280a8f24e988e0 2520 libdevel-callsite-perl_1.0.1-2.debian.tar.xz Dgit: 0efdf746d3c765f692c9694c800b2a3da75d6993 debian archive/debian/1.0.1-2 https://git.dgit.debian.org/libdevel-callsite-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmLlYf5fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZq6w/+MRhc+bAKfzNzWb/6nqJexJo2dEpX4M81uqIVBwDA8VA8cN8OmUYUYFnV iWvXtzVXpJKBxV4vq5pqvfH/e6Z4wPthsKPoTe+CVZ39DNg6lbFZXvPUMWqszY2q 47+HFGqoD272Yf30Aor+XgUDPtrU3ohEMkkVic6WQe7rI+uR0U3fVIszuNr3doRr akFi9dtJrENAq6BATiTM9R6jmWR6yw+cItVDqIa4kw9IGtgWGOOHFcG12Yj2kwHi /HARd6jJbKfVdTfyMKbiHFOBN6jgesiunonUKhOM2UKEWsr46xcuxyrVreQS23eC UNoyEhxS10QTx+M8rbAf+dvKJML2NTq6sy9mwdNv0+ghfd6q4SCPLNdrOk10tx12 lOjpKEvn3YVPZ0cjnVbhnlQgfJdQoZqsFj60UquAOrSu8ZMAcM6WDLrfEaofY0Dw cM6j+z3AeXQAMNEsdAC7ZOzkHEIe1nbWFBnCUvqObs6+WM+kcfOb9oUeH9KOAcN1 0jJVpD3gkj3UM49iDRsuFvzMGfTAnOPBjlbWDs6V1LbzyQ3l2HcWDICX5kYrpcVu p7n+yodAIYjxTNF+jDRD1byaye6hJSpT1vV6XV8DqsOlyyXp4oUBs+c0U4sv5x5R MxDIarQsL+2F8saZlZy5pxtdFLmWaJq2WQ4WPX5yHxSk+6uBo4w= =s6VZ -----END PGP SIGNATURE----- Fri Sep 27 09:11:38 UTC 2024 I: Checking whether the package is not for us Fri Sep 27 09:11:38 UTC 2024 I: Starting 1st build on remote node codethink02-arm64.debian.net. Fri Sep 27 09:11:38 UTC 2024 I: Preparing to do remote build '1' on codethink02-arm64.debian.net. Fri Sep 27 09:11:38 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink02-arm64.debian.net is marked as down. Fri Sep 27 09:11:38 UTC 2024 - checking via ssh if codethink02-arm64.debian.net is up. removed '/tmp/read-only-fs-test-VtUcsm' ==================================================================================== Fri Sep 27 09:11:40 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink02-arm64, called using "1 libdevel-callsite-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3 1.0.1-2" as arguments. Fri Sep 27 09:11:40 UTC 2024 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-McbPQgtu" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Sep 27 09:11:40 UTC 2024 I: Downloading source for trixie/libdevel-callsite-perl=1.0.1-2 Reading package lists... NOTICE: 'libdevel-callsite-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 68.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (dsc) [2420 B] Get:2 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (tar) [64.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (diff) [2520 B] Fetched 68.9 kB in 0s (1126 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdevel-callsite-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 68.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (dsc) [2420 B] Get:2 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (tar) [64.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (diff) [2520 B] Fetched 68.9 kB in 0s (1126 kB/s) Download complete and in download only mode ============================================================================= Building libdevel-callsite-perl in trixie on arm64 on codethink02-arm64 now. Date: Fri Sep 27 10:11:40 BST 2024 Date UTC: Fri Sep 27 09:11:40 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 26 21:11:40 -12 2024 I: pbuilder-time-stamp: 1727428300 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdevel-callsite-perl_1.0.1-2.dsc] I: copying [./libdevel-callsite-perl_1.0.1.orig.tar.gz] I: copying [./libdevel-callsite-perl_1.0.1-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jul 30 16:53:18 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libdevel-callsite-perl_1.0.1-2.dsc: no acceptable signature found dpkg-source: info: extracting libdevel-callsite-perl in libdevel-callsite-perl-1.0.1 dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1.orig.tar.gz dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3161382/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='a3e1dddf6a084681a7e51ead204655f3' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3161382' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_ocBU --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1 --logfile b1/build.log libdevel-callsite-perl_1.0.1-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3161382/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-8 [96.6 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] Fetched 20.4 MB in 0s (145 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_arm64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-2_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5_arm64.deb ... Unpacking libicu72:arm64 (72.1-5) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.38.2-5_arm64.deb ... Unpacking libperl-dev:arm64 (5.38.2-5) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.38.2-5) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libdevel-callsite-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevel-callsite-perl_1.0.1-2_source.changes dpkg-buildpackage: info: source package libdevel-callsite-perl dpkg-buildpackage: info: source version 1.0.1-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Devel::Callsite Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' Running Mkbootstrap for Callsite () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Callsite.xs > Callsite.xsc chmod 644 "Callsite.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 cp Callsite.pm blib/lib/Devel/Callsite.pm mv Callsite.xsc Callsite.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Callsite.c In file included from Callsite.xs:7: ppport.h:4594:11: warning: "WIDEST_UTYPE" redefined 4594 | # define WIDEST_UTYPE U64TYPE | ^~~~~~~~~~~~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:3327, from Callsite.xs:2: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/handy.h:1422:9: note: this is the location of the previous definition 1422 | #define WIDEST_UTYPE PERL_UINTMAX_T | ^~~~~~~~~~~~ Callsite.xs: In function 'XS_Devel__Callsite_callsite': Callsite.xs:64:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 64 | if (GIMME == G_ARRAY && CopSTASH_eq(PL_curcop, PL_debstash)) { | ^~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:6188: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Devel/Callsite/Callsite.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Callsite.o -o blib/arch/auto/Devel/Callsite/Callsite.so \ \ chmod 755 blib/arch/auto/Devel/Callsite/Callsite.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00test-pod.t .. skipped: Test::Pod 1.44 required for testing POD t/01callsite.t .. ok 1 - loading module ok 2 - running import ok 3 - Valid first call ok 4 - Valid second call ok 5 - Two separate calls ok 6 - converted B::COP=SCALAR(0xaaaae0178b58) to to B::OP ok 7 - B::COP=SCALAR(0xaaaae0178b58) converts back the same address ok 8 - Nested callsite ok 9 - Callsite defaults to level 0 ok 10 - Going too far returns empty list ok 11 - Going too far returns undef ok 12 - Nested callsite inside loop ok 13 - Callsite inside two loops ok 14 - Deeply nested callsite ok 15 - caller_nextop returns a B::OP 1..15 ok t/02debugger.t .. # Tests related to using when $^P = 1 ok 1 - Sanity check (DB::sub was called) ok 2 - Calls with DB::sub ok 3 - Nested calls with DB::sub ok 4 - Nested calls with and without DB::sub ok 5 - Sanity check (DB::sub was not called) ok 6 - Call from DB returns 2 values ok 7 - First value is the same (no DB::sub) ok 8 - Second value is the same (no DB::sub) ok 9 - Sanity check (DB::sub was called) ok 10 - Call from DB with DB::sub returns 2 values ok 11 - First value is the same (with DB::sub) ok 12 - Second value is different (with DB::sub) ok 13 - Valid context in initial thread ok 14 - Valid context in child thread ok 15 - Parent and child contexts are different 1..15 ok All tests successful. Files=3, Tests=30, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.26 cusr 0.06 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdevel-callsite-perl/ make -j12 install DESTDIR=/build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/auto/Devel/Callsite/Callsite.so Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/Devel/Callsite.pm Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/share/man/man3/Devel::Callsite.3pm make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdevel-callsite-perl-dbgsym' in '../libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb'. dpkg-deb: building package 'libdevel-callsite-perl' in '../libdevel-callsite-perl_1.0.1-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3161382 and its subdirectories I: Current time: Thu Sep 26 21:12:04 -12 2024 I: pbuilder-time-stamp: 1727428324 Fri Sep 27 09:12:04 UTC 2024 I: Signing ./b1/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo as libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc Fri Sep 27 09:12:04 UTC 2024 I: Signed ./b1/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo as ./b1/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc Fri Sep 27 09:12:04 UTC 2024 - build #1 for libdevel-callsite-perl/trixie/arm64 on codethink02-arm64 done. Starting cleanup. All cleanup done. Fri Sep 27 09:12:04 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-McbPQgtu, removing. /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 09:12 b1 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 09:11 b2 -rw-r--r-- 1 jenkins jenkins 2420 Jul 30 2022 libdevel-callsite-perl_1.0.1-2.dsc -rw------- 1 jenkins jenkins 3633 Sep 27 09:11 rbuildlog.ClbTfHw /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1: total 96 -rw-r--r-- 1 jenkins jenkins 24327 Sep 27 09:12 build.log -rw-r--r-- 1 jenkins jenkins 26284 Sep 27 09:12 libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2520 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2420 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2.dsc -rw-r--r-- 1 jenkins jenkins 5014 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5896 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1887 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 12248 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1689 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2: total 0 Fri Sep 27 09:12:05 UTC 2024 I: Deleting $TMPDIR on codethink02-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 26 21:11:40 -12 2024 I: pbuilder-time-stamp: 1727428300 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdevel-callsite-perl_1.0.1-2.dsc] I: copying [./libdevel-callsite-perl_1.0.1.orig.tar.gz] I: copying [./libdevel-callsite-perl_1.0.1-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jul 30 16:53:18 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libdevel-callsite-perl_1.0.1-2.dsc: no acceptable signature found dpkg-source: info: extracting libdevel-callsite-perl in libdevel-callsite-perl-1.0.1 dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1.orig.tar.gz dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3161382/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='a3e1dddf6a084681a7e51ead204655f3' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3161382' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_ocBU --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1 --logfile b1/build.log libdevel-callsite-perl_1.0.1-2.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink02-arm64 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3161382/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-8 [96.6 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] Fetched 20.4 MB in 0s (145 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_arm64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-2_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5_arm64.deb ... Unpacking libicu72:arm64 (72.1-5) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.38.2-5_arm64.deb ... Unpacking libperl-dev:arm64 (5.38.2-5) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.38.2-5) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libdevel-callsite-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevel-callsite-perl_1.0.1-2_source.changes dpkg-buildpackage: info: source package libdevel-callsite-perl dpkg-buildpackage: info: source version 1.0.1-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Devel::Callsite Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' Running Mkbootstrap for Callsite () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Callsite.xs > Callsite.xsc chmod 644 "Callsite.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 cp Callsite.pm blib/lib/Devel/Callsite.pm mv Callsite.xsc Callsite.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Callsite.c In file included from Callsite.xs:7: ppport.h:4594:11: warning: "WIDEST_UTYPE" redefined 4594 | # define WIDEST_UTYPE U64TYPE | ^~~~~~~~~~~~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:3327, from Callsite.xs:2: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/handy.h:1422:9: note: this is the location of the previous definition 1422 | #define WIDEST_UTYPE PERL_UINTMAX_T | ^~~~~~~~~~~~ Callsite.xs: In function 'XS_Devel__Callsite_callsite': Callsite.xs:64:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 64 | if (GIMME == G_ARRAY && CopSTASH_eq(PL_curcop, PL_debstash)) { | ^~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:6188: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Devel/Callsite/Callsite.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Callsite.o -o blib/arch/auto/Devel/Callsite/Callsite.so \ \ chmod 755 blib/arch/auto/Devel/Callsite/Callsite.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00test-pod.t .. skipped: Test::Pod 1.44 required for testing POD t/01callsite.t .. ok 1 - loading module ok 2 - running import ok 3 - Valid first call ok 4 - Valid second call ok 5 - Two separate calls ok 6 - converted B::COP=SCALAR(0xaaaae0178b58) to to B::OP ok 7 - B::COP=SCALAR(0xaaaae0178b58) converts back the same address ok 8 - Nested callsite ok 9 - Callsite defaults to level 0 ok 10 - Going too far returns empty list ok 11 - Going too far returns undef ok 12 - Nested callsite inside loop ok 13 - Callsite inside two loops ok 14 - Deeply nested callsite ok 15 - caller_nextop returns a B::OP 1..15 ok t/02debugger.t .. # Tests related to using when $^P = 1 ok 1 - Sanity check (DB::sub was called) ok 2 - Calls with DB::sub ok 3 - Nested calls with DB::sub ok 4 - Nested calls with and without DB::sub ok 5 - Sanity check (DB::sub was not called) ok 6 - Call from DB returns 2 values ok 7 - First value is the same (no DB::sub) ok 8 - Second value is the same (no DB::sub) ok 9 - Sanity check (DB::sub was called) ok 10 - Call from DB with DB::sub returns 2 values ok 11 - First value is the same (with DB::sub) ok 12 - Second value is different (with DB::sub) ok 13 - Valid context in initial thread ok 14 - Valid context in child thread ok 15 - Parent and child contexts are different 1..15 ok All tests successful. Files=3, Tests=30, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.26 cusr 0.06 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdevel-callsite-perl/ make -j12 install DESTDIR=/build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/auto/Devel/Callsite/Callsite.so Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/Devel/Callsite.pm Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/share/man/man3/Devel::Callsite.3pm make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdevel-callsite-perl-dbgsym' in '../libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb'. dpkg-deb: building package 'libdevel-callsite-perl' in '../libdevel-callsite-perl_1.0.1-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3161382 and its subdirectories I: Current time: Thu Sep 26 21:12:04 -12 2024 I: pbuilder-time-stamp: 1727428324 Fri Sep 27 09:12:06 UTC 2024 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Sep 27 09:12:06 UTC 2024 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Sep 27 09:12:06 UTC 2024 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Sep 27 09:12:06 UTC 2024 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-0RxxFU' ==================================================================================== Thu Oct 30 15:35:06 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libdevel-callsite-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3 1.0.1-2" as arguments. Thu Oct 30 15:35:06 UTC 2025 - actually running "reproducible_build.sh" (md5sum 79f74068471242981be9b3b00196cbfb) as "/tmp/jenkins-script-0CgexUTz" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Oct 30 15:35:06 UTC 2025 I: Downloading source for trixie/libdevel-callsite-perl=1.0.1-2 Reading package lists... NOTICE: 'libdevel-callsite-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 68.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (dsc) [2420 B] Get:2 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (tar) [64.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (diff) [2520 B] Fetched 68.9 kB in 0s (3960 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdevel-callsite-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevel-callsite-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 68.9 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (dsc) [2420 B] Get:2 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (tar) [64.0 kB] Get:3 http://deb.debian.org/debian trixie/main libdevel-callsite-perl 1.0.1-2 (diff) [2520 B] Fetched 68.9 kB in 0s (3960 kB/s) Download complete and in download only mode ============================================================================= Re-Building libdevel-callsite-perl in trixie on arm64 on codethink03-arm64 now. Date: Thu Oct 30 15:35:06 GMT 2025 Date UTC: Thu Oct 30 15:35:06 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3 + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_gMei + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libdevel-callsite-perl = debian-installer -o libdevel-callsite-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libdevel-callsite-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_gMei --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2 --logfile b2/build.log libdevel-callsite-perl_1.0.1-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 05:35:06 +14 2025 I: pbuilder-time-stamp: 1761838506 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libdevel-callsite-perl_1.0.1-2.dsc] I: copying [./libdevel-callsite-perl_1.0.1.orig.tar.gz] I: copying [./libdevel-callsite-perl_1.0.1-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jul 30 16:53:18 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libdevel-callsite-perl_1.0.1-2.dsc: no acceptable signature found dpkg-source: info: extracting libdevel-callsite-perl in libdevel-callsite-perl-1.0.1 dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1.orig.tar.gz dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Oct 30 15:35 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=45d31d8078034b9fa06a4b9bcc6707d7 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2514097 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_gMei --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2 --logfile b2/build.log libdevel-callsite-perl_1.0.1-2.dsc' SUDO_GID=109 SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3 [100 kB] Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-2 [198 kB] Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b1 [69.0 kB] Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-5 [1129 kB] Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.2-8 [96.6 kB] Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB] Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-4 [277 kB] Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.191-2 [188 kB] Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB] Get: 24 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-5 [9224 kB] Get: 25 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.9.14+dfsg-1.3+b3 [624 kB] Get: 26 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-2 [1532 kB] Get: 27 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] Fetched 20.4 MB in 0s (108 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_arm64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_arm64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_arm64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_arm64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_arm64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_arm64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.191-2_arm64.deb ... Unpacking libelf1t64:arm64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../23-libicu72_72.1-5_arm64.deb ... Unpacking libicu72:arm64 (72.1-5) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.14+dfsg-1.3+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_arm64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.38.2-5_arm64.deb ... Unpacking libperl-dev:arm64 (5.38.2-5) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libicu72:arm64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:arm64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:arm64 (5.38.2-5) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:arm64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:arm64 (0.0.8-1+b1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.3+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libdevel-callsite-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdevel-callsite-perl_1.0.1-2_source.changes dpkg-buildpackage: info: source package libdevel-callsite-perl dpkg-buildpackage: info: source version 1.0.1-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Devel::Callsite Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' Running Mkbootstrap for Callsite () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Callsite.xs > Callsite.xsc cp Callsite.pm blib/lib/Devel/Callsite.pm chmod 644 "Callsite.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 mv Callsite.xsc Callsite.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Callsite.c In file included from Callsite.xs:7: ppport.h:4594:11: warning: "WIDEST_UTYPE" redefined 4594 | # define WIDEST_UTYPE U64TYPE | ^~~~~~~~~~~~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:3327, from Callsite.xs:2: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/handy.h:1422:9: note: this is the location of the previous definition 1422 | #define WIDEST_UTYPE PERL_UINTMAX_T | ^~~~~~~~~~~~ Callsite.xs: In function 'XS_Devel__Callsite_callsite': Callsite.xs:64:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations] 64 | if (GIMME == G_ARRAY && CopSTASH_eq(PL_curcop, PL_debstash)) { | ^~ In file included from /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/perl.h:6188: /usr/lib/aarch64-linux-gnu/perl/5.38/CORE/proto.h:1019:1: note: declared here 1019 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Devel/Callsite/Callsite.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Callsite.o -o blib/arch/auto/Devel/Callsite/Callsite.so \ \ chmod 755 blib/arch/auto/Devel/Callsite/Callsite.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00test-pod.t .. skipped: Test::Pod 1.44 required for testing POD t/01callsite.t .. ok 1 - loading module ok 2 - running import ok 3 - Valid first call ok 4 - Valid second call ok 5 - Two separate calls ok 6 - converted B::COP=SCALAR(0xaaaae3d6a4d0) to to B::OP ok 7 - B::COP=SCALAR(0xaaaae3d6a4d0) converts back the same address ok 8 - Nested callsite ok 9 - Callsite defaults to level 0 ok 10 - Going too far returns empty list ok 11 - Going too far returns undef ok 12 - Nested callsite inside loop ok 13 - Callsite inside two loops ok 14 - Deeply nested callsite ok 15 - caller_nextop returns a B::OP 1..15 ok t/02debugger.t .. # Tests related to using when $^P = 1 ok 1 - Sanity check (DB::sub was called) ok 2 - Calls with DB::sub ok 3 - Nested calls with DB::sub ok 4 - Nested calls with and without DB::sub ok 5 - Sanity check (DB::sub was not called) ok 6 - Call from DB returns 2 values ok 7 - First value is the same (no DB::sub) ok 8 - Second value is the same (no DB::sub) ok 9 - Sanity check (DB::sub was called) ok 10 - Call from DB with DB::sub returns 2 values ok 11 - First value is the same (with DB::sub) ok 12 - Second value is different (with DB::sub) ok 13 - Valid context in initial thread ok 14 - Valid context in child thread ok 15 - Parent and child contexts are different 1..15 ok All tests successful. Files=3, Tests=30, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.30 cusr 0.05 csys = 0.40 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdevel-callsite-perl/ make -j12 install DESTDIR=/build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/auto/Devel/Callsite/Callsite.so Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/lib/aarch64-linux-gnu/perl5/5.38/Devel/Callsite.pm Installing /build/reproducible-path/libdevel-callsite-perl-1.0.1/debian/libdevel-callsite-perl/usr/share/man/man3/Devel::Callsite.3pm make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdevel-callsite-perl' in '../libdevel-callsite-perl_1.0.1-2_arm64.deb'. dpkg-deb: building package 'libdevel-callsite-perl-dbgsym' in '../libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2514097 and its subdirectories I: Current time: Fri Oct 31 05:35:33 +14 2025 I: pbuilder-time-stamp: 1761838533 + false + set +x Thu Oct 30 15:35:33 UTC 2025 I: Signing ./b2/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo as libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc Thu Oct 30 15:35:33 UTC 2025 I: Signed ./b2/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo as ./b2/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc Thu Oct 30 15:35:33 UTC 2025 - build #2 for libdevel-callsite-perl/trixie/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu Oct 30 15:35:33 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-0CgexUTz, removing. /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 09:12 b1 drwxr-xr-x 2 jenkins jenkins 4096 Sep 27 09:12 b2 -rw-r--r-- 1 jenkins jenkins 2420 Jul 30 2022 libdevel-callsite-perl_1.0.1-2.dsc -rw------- 1 jenkins jenkins 28261 Sep 27 09:12 rbuildlog.ClbTfHw /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1: total 96 -rw-r--r-- 1 jenkins jenkins 24327 Sep 27 09:12 build.log -rw-r--r-- 1 jenkins jenkins 26284 Sep 27 09:12 libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2520 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2420 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2.dsc -rw-r--r-- 1 jenkins jenkins 5014 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5896 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1887 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 12248 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1689 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2: total 100 -rw-r--r-- 1 jenkins jenkins 26270 Sep 27 09:12 build.log -rw-r--r-- 1 jenkins jenkins 26284 Sep 27 09:12 libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2520 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2420 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2.dsc -rw-r--r-- 1 jenkins jenkins 5014 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo -rw-r--r-- 1 jenkins jenkins 5896 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1887 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 12248 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1689 Sep 27 09:12 libdevel-callsite-perl_1.0.1-2_source.changes Fri Sep 27 09:12:36 UTC 2024 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Sep 27 09:12:37 UTC 2024 I: libdevel-callsite-perl_1.0.1-2_arm64.changes: Format: 1.8 Date: Sat, 30 Jul 2022 18:51:39 +0200 Source: libdevel-callsite-perl Binary: libdevel-callsite-perl libdevel-callsite-perl-dbgsym Architecture: arm64 Version: 1.0.1-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libdevel-callsite-perl - Perl module to get caller return OP address and Perl interpreter Changes: libdevel-callsite-perl (1.0.1-2) unstable; urgency=medium . * Team upload. . [ Debian Janitor ] * Bump debhelper from old 10 to 12. * Set debhelper-compat version in Build-Depends. . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 12 to 13. . [ gregor herrmann ] * Declare compliance with Debian Policy 4.6.1. Checksums-Sha1: a9828140d3f06c4ab1441dc0a8e771be84c4af7a 26284 libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb 0fbfcfa76968efa2b83f183e83e897c907c567b8 5014 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo 91b578e14d86da3a5080f8a9e7b8e55c32eb775a 12248 libdevel-callsite-perl_1.0.1-2_arm64.deb Checksums-Sha256: 6eade4239ab15b32d5ddc98bfb4ffd1c8abcf364761581009fe68867bb530cbd 26284 libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb ee362005f0ba9465aadbb249011dcd2ded9075ace95373fcca5fd512e61e709c 5014 libdevel-callsite-perl_1.0.1-2_arm64.buildinfo a29c20aea1fe9f926e4e07bd7de870f5470077f9c95a0275f557874bc5043507 12248 libdevel-callsite-perl_1.0.1-2_arm64.deb Files: 8640da486b6b61ced353277f5404980c 26284 debug optional libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb 8f13c20cf01b0412a64b02223caace4b 5014 perl optional libdevel-callsite-perl_1.0.1-2_arm64.buildinfo b342dc77e3409ab1471bac3067b15542 12248 perl optional libdevel-callsite-perl_1.0.1-2_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libdevel-callsite-perl_1.0.1-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libdevel-callsite-perl_1.0.1-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libdevel-callsite-perl_1.0.1-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/libdevel-callsite-perl_1.0.1-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/arm64/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libdevel-callsite-perl_1.0.1-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-09-27 09:12:05.304859003 +0000 +++ b2/build.log 2024-09-27 09:12:36.511531988 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Sep 26 21:11:40 -12 2024 -I: pbuilder-time-stamp: 1727428300 +I: Current time: Fri Oct 31 05:35:06 +14 2025 +I: pbuilder-time-stamp: 1761838506 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -25,52 +25,84 @@ dpkg-source: info: unpacking libdevel-callsite-perl_1.0.1-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3161382/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Oct 30 15:35 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='a3e1dddf6a084681a7e51ead204655f3' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3161382' - PS1='# ' - PS2='> ' + INVOCATION_ID=45d31d8078034b9fa06a4b9bcc6707d7 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2514097 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_ocBU --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1 --logfile b1/build.log libdevel-callsite-perl_1.0.1-2.dsc' - SUDO_GID='109' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/pbuilderrc_gMei --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2 --logfile b2/build.log libdevel-callsite-perl_1.0.1-2.dsc' + SUDO_GID=109 + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink02-arm64 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-25-cloud-arm64 #1 SMP Debian 6.1.106-3 (2024-08-26) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3161382/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -139,7 +171,7 @@ Get: 28 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main arm64 libperl-dev arm64 5.38.2-5 [998 kB] -Fetched 20.4 MB in 0s (145 MB/s) +Fetched 20.4 MB in 0s (108 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19895 files and directories currently installed.) @@ -274,7 +306,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libdevel-callsite-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevel-callsite-perl_1.0.1-2_source.changes +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libdevel-callsite-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdevel-callsite-perl_1.0.1-2_source.changes dpkg-buildpackage: info: source package libdevel-callsite-perl dpkg-buildpackage: info: source version 1.0.1-2 dpkg-buildpackage: info: source distribution unstable @@ -300,9 +336,9 @@ make[1]: Entering directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' Running Mkbootstrap for Callsite () "/usr/bin/perl" "/usr/share/perl/5.38/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.38/ExtUtils/typemap' Callsite.xs > Callsite.xsc +cp Callsite.pm blib/lib/Devel/Callsite.pm chmod 644 "Callsite.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Callsite.bs blib/arch/auto/Devel/Callsite/Callsite.bs 644 -cp Callsite.pm blib/lib/Devel/Callsite.pm mv Callsite.xsc Callsite.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevel-callsite-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.38/CORE" Callsite.c In file included from Callsite.xs:7: @@ -341,8 +377,8 @@ ok 3 - Valid first call ok 4 - Valid second call ok 5 - Two separate calls -ok 6 - converted B::COP=SCALAR(0xaaaae0178b58) to to B::OP -ok 7 - B::COP=SCALAR(0xaaaae0178b58) converts back the same address +ok 6 - converted B::COP=SCALAR(0xaaaae3d6a4d0) to to B::OP +ok 7 - B::COP=SCALAR(0xaaaae3d6a4d0) converts back the same address ok 8 - Nested callsite ok 9 - Callsite defaults to level 0 ok 10 - Going too far returns empty list @@ -373,7 +409,7 @@ 1..15 ok All tests successful. -Files=3, Tests=30, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.26 cusr 0.06 csys = 0.36 CPU) +Files=3, Tests=30, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.30 cusr 0.05 csys = 0.40 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevel-callsite-perl-1.0.1' create-stamp debian/debhelper-build-stamp @@ -409,8 +445,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libdevel-callsite-perl-dbgsym' in '../libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb'. dpkg-deb: building package 'libdevel-callsite-perl' in '../libdevel-callsite-perl_1.0.1-2_arm64.deb'. +dpkg-deb: building package 'libdevel-callsite-perl-dbgsym' in '../libdevel-callsite-perl-dbgsym_1.0.1-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libdevel-callsite-perl_1.0.1-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -418,12 +454,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2514097/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3161382 and its subdirectories -I: Current time: Thu Sep 26 21:12:04 -12 2024 -I: pbuilder-time-stamp: 1727428324 +I: removing directory /srv/workspace/pbuilder/2514097 and its subdirectories +I: Current time: Fri Oct 31 05:35:33 +14 2025 +I: pbuilder-time-stamp: 1761838533 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libdevel-callsite-perl_1.0.1-2.diff: 66.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/libdevel-callsite-perl_1.0.1-2.diff.gz b2/build.log: 72.8% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.3% -- replaced with stdout Fri Sep 27 09:12:38 UTC 2024 I: diffoscope 277 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libdevel-callsite-perl_trixie_arm64_1727428358 + touch /var/log/reproducible-builds/diffoscope_stamp_libdevel-callsite-perl_trixie_arm64_1727428358 + RESULT=0 + systemd-run '--description=diffoscope on libdevel-callsite-perl/1.0.1-2 in trixie/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_7-37649 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3 --run-session -c jenkins-reproducible-trixie-diffoscope-42a7e1fa-b0ee-4cc9-b016-9f23a9c7c83b -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/dbd-tmp-bTbMFsl ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/libdevel-callsite-perl_1.0.1-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/libdevel-callsite-perl_1.0.1-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/libdevel-callsite-perl_1.0.1-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1/libdevel-callsite-perl_1.0.1-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2/libdevel-callsite-perl_1.0.1-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_7-37649.service Warning: program compiled against libxml 212 using older 209 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/libdevel-callsite-perl_1.0.1-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/libdevel-callsite-perl_1.0.1-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/libdevel-callsite-perl_1.0.1-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b1/libdevel-callsite-perl_1.0.1-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.n0nGzpF3/b2/libdevel-callsite-perl_1.0.1-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.400s) 0.400s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 754ms CPU time consumed: 750ms _ _ _ _ _ _ _ _ _ | (_) |__ __| | _____ _____| | ___ __ _| | |___(_) |_ ___ | | | '_ \ / _` |/ _ \ \ / / _ \ |_____ / __/ _` | | / __| | __/ _ \_____ | | | |_) | (_| | __/\ V / __/ |_____| (_| (_| | | \__ \ | || __/_____| |_|_|_.__/ \__,_|\___| \_/ \___|_| \___\__,_|_|_|___/_|\__\___| _ _ __ ___ _ __| | | '_ \ / _ \ '__| | | |_) | __/ | | | | .__/ \___|_| |_| |_| Fri Sep 27 09:12:39 UTC 2024 I: diffoscope 277 found no differences in the changes files, and a .buildinfo file also exists. Fri Sep 27 09:12:39 UTC 2024 I: libdevel-callsite-perl from trixie built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-09-27 09:12:40] INFO: Starting at 2024-09-27 09:12:40.260624 [2024-09-27 09:12:40] INFO: Generating the pages of 1 package(s) [2024-09-27 09:12:40] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/arm64/libdevel-callsite-perl didn't produce a buildlog, even though it has been built. [2024-09-27 09:12:40] INFO: Finished at 2024-09-27 09:12:40.871497, took: 0:00:00.610884 Fri Sep 27 09:12:40 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/arm64/libdevel-callsite-perl.html Fri Sep 27 09:12:40 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Sep 27 09:12:40 UTC 2024 I: Submitting 8.0K b1/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc https://buildinfo.debian.net/0fbfcfa76968efa2b83f183e83e897c907c567b8/libdevel-callsite-perl_1.0.1-2_arm64 Fri Sep 27 09:12:41 UTC 2024 I: Submitting 8.0K b2/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc https://buildinfo.debian.net/2faf7f17fb31553a4618d5dd186a2095ee4c6bcb/libdevel-callsite-perl_1.0.1-2_arm64 Fri Sep 27 09:12:42 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Sep 27 09:12:42 UTC 2024 I: Done submitting .buildinfo files. Fri Sep 27 09:12:42 UTC 2024 I: Removing signed libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc files: removed './b1/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc' removed './b2/libdevel-callsite-perl_1.0.1-2_arm64.buildinfo.asc' 1727428362 arm64 trixie libdevel-callsite-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libdevel-callsite-perl_1.0.1-2.rbuild.log: 70.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/arm64/libdevel-callsite-perl_1.0.1-2.rbuild.log.gz [2024-09-27 09:12:43] INFO: Starting at 2024-09-27 09:12:43.061273 [2024-09-27 09:12:43] INFO: Generating the pages of 1 package(s) [2024-09-27 09:12:43] INFO: Finished at 2024-09-27 09:12:43.653783, took: 0:00:00.592517 All cleanup done. Fri Sep 27 09:12:43 UTC 2024 - total duration: 0h 1m 11s. Fri Sep 27 09:12:43 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-aWnT4kM4, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 15.221s CPU time consumed: 8.411s