Running as unit: rb-build-arm64_7-97159.service; invocation ID: da8b8b1f27e74a6caca04d714c69cbb1 ==================================================================================== Thu Sep 18 10:05:05 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_7) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Thu Sep 18 10:05:05 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-rgSFFSwt" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Sep 18 10:05:05 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Thu Sep 18 10:05:05 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-jkRqpo' Thu Sep 18 10:05:06 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Thu Sep 18 10:05:06 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-kTeqyP' ok, let's check if libmodule-build-tiny-perl is building anywhere yet… ok, libmodule-build-tiny-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libmodule-build-tiny-perl in unstable on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Thu Sep 18 10:05:18 UTC 2025 I: starting to build libmodule-build-tiny-perl/unstable/arm64 on jenkins on '2025-09-18 10:05' Thu Sep 18 10:05:18 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_7/97159/console.log 1758189918 arm64 unstable libmodule-build-tiny-perl Thu Sep 18 10:05:18 UTC 2025 I: Downloading source for unstable/libmodule-build-tiny-perl=0.052-1 --2025-09-18 10:05:18-- http://deb.debian.org/debian/pool/main/libm/libmodule-build-tiny-perl/libmodule-build-tiny-perl_0.052-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2738 (2.7K) [text/prs.lines.tag] Saving to: ‘libmodule-build-tiny-perl_0.052-1.dsc’ 0K .. 100% 296M=0s 2025-09-18 10:05:18 (296 MB/s) - ‘libmodule-build-tiny-perl_0.052-1.dsc’ saved [2738/2738] --2025-09-18 10:05:18-- http://deb.debian.org/debian/pool/main/libm/libmodule-build-tiny-perl/libmodule-build-tiny-perl_0.052-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2738 (2.7K) [text/prs.lines.tag] Saving to: ‘libmodule-build-tiny-perl_0.052-1.dsc’ 0K .. 100% 296M=0s 2025-09-18 10:05:18 (296 MB/s) - ‘libmodule-build-tiny-perl_0.052-1.dsc’ saved [2738/2738] Thu Sep 18 10:05:18 UTC 2025 I: libmodule-build-tiny-perl_0.052-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libmodule-build-tiny-perl Binary: libmodule-build-tiny-perl Architecture: all Version: 0.052-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Homepage: https://metacpan.org/release/Module-Build-Tiny Standards-Version: 4.7.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl Build-Depends-Indep: libcpan-requirements-dynamic-perl , libextutils-cbuilder-perl , libextutils-config-perl, libextutils-helpers-perl, libextutils-installpaths-perl, libjson-pp-perl , libtest-harness-perl , libtest-simple-perl , perl-xs-dev Package-List: libmodule-build-tiny-perl deb perl optional arch=all Checksums-Sha1: 6b15cff6e5fa4f2c1a5d407503172eabc7636093 22980 libmodule-build-tiny-perl_0.052.orig.tar.gz 6cb85fdc9bc1ba7009cc99cc8a22c3bcf25e9f19 2860 libmodule-build-tiny-perl_0.052-1.debian.tar.xz Checksums-Sha256: bd10452c9f24d4b4fe594126e3ad231bab6cebf16acda40a4e8dc784907eb87f 22980 libmodule-build-tiny-perl_0.052.orig.tar.gz 49f75c4e8898e8d427737917d76baee6b70d6adc47afa16f7b6b4ba754402914 2860 libmodule-build-tiny-perl_0.052-1.debian.tar.xz Files: 91e56a426d82dbf33761984e26ed8acb 22980 libmodule-build-tiny-perl_0.052.orig.tar.gz 58ff6f7c92899f94ce841acfb8256433 2860 libmodule-build-tiny-perl_0.052-1.debian.tar.xz Dgit: 8df06829822c939acfa12955a8eddc635208e228 debian archive/debian/0.052-1 https://git.dgit.debian.org/libmodule-build-tiny-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmjIhXRfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbsqA/8CXfwqXtW5bXHrNoMfkxvckmqz7RdWmJSUhWZ2D1bejT8yYkGPMkD4GI3 VwXP3m3zik7lx1/VJF7kD5bUgFxqNBZPWCUuJj9v9EjTRAxediVtehmIIBZUzMuR JF2kwPxtiv1we6mcZqvQMGWgSvxJaY1vGx8KQLUdkKZulUuckkdiuODnV2bJ7wqK XjrRm2Zj2R0/ABstW8wCqYFt/pu5zyDkbvwwMDuB0xija0d/dZ9wMpfW/uphCmPX gxyxhe5QqIFqgQ9J5gMvP4XCG0be4HyaKj/+5o7BUXL43WhveoaJVBmYwEAoPtIX dOxFSDxqJMRslT1DM3E9XUrGuRBLIc2jX4Idy4PGNFbUuOjyCGoZgpqlE8qwuUQc 8w0Z0UgtFVjqFQHyZAgAZtIEvWYsmvqmxm9t4vQH8ptprR0dzmfOTEGOSyEMd6YW 5CYLNdv1k/9bsiw3mZfGvHO1eXhPa9FuLjTjVUsGmo9QxKq07R0Yg/NS90Ig381Y EwrNEw237uTp+lTIUWH2UiqVOZ5M1SgQcCBMvqHPR5i5knw16c2bh7PqukZ/aHA+ /BYvHMeDj7r3nbc8yVmIYMLXrC1OwRuQEs0qz/rr/qJzQkWRGwxPutpV408HvNWW 4xZIgaymGtC3k7XwyQyRWel4m9xFowMN/sZpOuB1zLSWXWhCYSg= =fT3W -----END PGP SIGNATURE----- Thu Sep 18 10:05:18 UTC 2025 I: Checking whether the package is not for us Thu Sep 18 10:05:18 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Thu Sep 18 10:05:18 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Thu Sep 18 10:05:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Thu Sep 18 10:05:18 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-weyu32' ==================================================================================== Thu Sep 18 10:05:19 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libmodule-build-tiny-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN 0.052-1" as arguments. Thu Sep 18 10:05:19 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-KBbRb2vs" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Sep 18 10:05:19 UTC 2025 I: Downloading source for unstable/libmodule-build-tiny-perl=0.052-1 Reading package lists... NOTICE: 'libmodule-build-tiny-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (dsc) [2738 B] Get:2 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (tar) [23.0 kB] Get:3 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (diff) [2860 B] Fetched 28.6 kB in 0s (475 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libmodule-build-tiny-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (dsc) [2738 B] Get:2 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (tar) [23.0 kB] Get:3 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (diff) [2860 B] Fetched 28.6 kB in 0s (475 kB/s) Download complete and in download only mode ============================================================================= Building libmodule-build-tiny-perl in unstable on arm64 on codethink04-arm64 now. Date: Thu Sep 18 11:05:20 BST 2025 Date UTC: Thu Sep 18 10:05:20 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Sep 17 22:05:20 -12 2025 I: pbuilder-time-stamp: 1758189920 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libmodule-build-tiny-perl_0.052-1.dsc] I: copying [./libmodule-build-tiny-perl_0.052.orig.tar.gz] I: copying [./libmodule-build-tiny-perl_0.052-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libmodule-build-tiny-perl_0.052-1.dsc: no acceptable signature found dpkg-source: info: extracting libmodule-build-tiny-perl in libmodule-build-tiny-perl-0.052 dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052.orig.tar.gz dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/262544/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='f92566f95d45412786b7ed5ac615661d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='262544' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_QdHC --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1 --logfile b1/build.log libmodule-build-tiny-perl_0.052-1.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/262544/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl, libcpan-requirements-dynamic-perl, libextutils-cbuilder-perl, libextutils-config-perl, libextutils-helpers-perl, libextutils-installpaths-perl, libjson-pp-perl, libtest-harness-perl, libtest-simple-perl, perl-xs-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcpan-requirements-dynamic-perl; however: Package libcpan-requirements-dynamic-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-config-perl; however: Package libextutils-config-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-helpers-perl; however: Package libextutils-helpers-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-installpaths-perl; however: Package libextutils-installpaths-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcpan-requirements-dynamic-perl{a} libdebhelper-perl{a} libelf1t64{a} libextutils-config-perl{a} libextutils-hascompiler-perl{a} libextutils-helpers-perl{a} libextutils-installpaths-perl{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 50.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libextutils-config-perl all 0.010-1 [8364 B] Get: 31 http://deb.debian.org/debian unstable/main arm64 libextutils-hascompiler-perl all 0.025-1 [9232 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libcpan-requirements-dynamic-perl all 0.002-1 [7696 B] Get: 33 http://deb.debian.org/debian unstable/main arm64 libextutils-helpers-perl all 0.028-1 [11.9 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 libextutils-installpaths-perl all 0.014-1 [13.9 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Fetched 12.0 MB in 0s (108 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libextutils-config-perl. Preparing to unpack .../29-libextutils-config-perl_0.010-1_all.deb ... Unpacking libextutils-config-perl (0.010-1) ... Selecting previously unselected package libextutils-hascompiler-perl. Preparing to unpack .../30-libextutils-hascompiler-perl_0.025-1_all.deb ... Unpacking libextutils-hascompiler-perl (0.025-1) ... Selecting previously unselected package libcpan-requirements-dynamic-perl. Preparing to unpack .../31-libcpan-requirements-dynamic-perl_0.002-1_all.deb ... Unpacking libcpan-requirements-dynamic-perl (0.002-1) ... Selecting previously unselected package libextutils-helpers-perl. Preparing to unpack .../32-libextutils-helpers-perl_0.028-1_all.deb ... Unpacking libextutils-helpers-perl (0.028-1) ... Selecting previously unselected package libextutils-installpaths-perl. Preparing to unpack .../33-libextutils-installpaths-perl_0.014-1_all.deb ... Unpacking libextutils-installpaths-perl (0.014-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../34-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libextutils-config-perl (0.010-1) ... Setting up libextutils-helpers-perl (0.028-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libextutils-installpaths-perl (0.014-1) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libextutils-hascompiler-perl (0.025-1) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up libcpan-requirements-dynamic-perl (0.002-1) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libmodule-build-tiny-perl-0.052/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libmodule-build-tiny-perl_0.052-1_source.changes dpkg-buildpackage: info: source package libmodule-build-tiny-perl dpkg-buildpackage: info: source version 0.052-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-build-tiny-perl-0.052=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-build-tiny-perl-0.052=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Creating new 'Build' script for 'Module-Build-Tiny' version '0.052' dh_auto_build /usr/bin/perl Build cp lib/Module/Build/Tiny.pm blib/lib/Module/Build/Tiny.pm dh_auto_test /usr/bin/perl Build test --verbose 1 /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. t/simple.t .. Creating new 'Build' script for 'Foo-Bar' version '0.001' ok 1 - Ran Build.PL ok 2 - Build created ok 3 - Build is executable ok 4 - Build has shebang line with $^X ok 5 - _build_params created ok 6 - Could run Build ok 7 - Build output looks correctly ok 8 - created blib ok 9 - created blib/lib ok 10 - created blib/script ok 11 - Foo::Bar copied to blib ok 12 - pm contents are correct ok 13 - pm file in blib is readonly ok 14 - bin/simple copied to blib ok 15 - blib/script/simple contents are correct ok 16 - blib/script/simple is executable ok 17 - script in blib is readonly ok 18 - blib/script/simple has shebang line with $^X ok 19 - dist sharedir has been made ok 20 - dist sharedir file has been made ok 21 - moduole sharedir has been made ok 22 - module sharedir file has been made ok 23 - Dependency on Foo has been inserted ok 24 - Can run XSub Foo::Bar::foo ok 25 - Module gets manified properly ok 26 - Could run Build install ok 27 - Build install output looks correctly ok 28 - Module is installed ok 29 - Script is installed 1..29 ok All tests successful. Files=1, Tests=29, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.38 cusr 0.13 csys = 0.54 CPU) Result: PASS create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libmodule-build-tiny-perl/ /usr/bin/perl Build install --destdir /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl --create_packlist 0 Installing /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl/usr/share/perl5/Module/Build/Tiny.pm Installing /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl/usr/share/man/man3/Module::Build::Tiny.3pm dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libmodule-build-tiny-perl' in '../libmodule-build-tiny-perl_0.052-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libmodule-build-tiny-perl_0.052-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libmodule-build-tiny-perl_0.052-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/262544 and its subdirectories I: Current time: Wed Sep 17 22:05:48 -12 2025 I: pbuilder-time-stamp: 1758189948 Thu Sep 18 10:05:48 UTC 2025 I: Signing ./b1/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo as libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc Thu Sep 18 10:05:48 UTC 2025 I: Signed ./b1/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo as ./b1/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc Thu Sep 18 10:05:48 UTC 2025 - build #1 for libmodule-build-tiny-perl/unstable/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Thu Sep 18 10:05:48 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-KBbRb2vs, removing. /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Sep 18 10:05 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 18 10:05 b2 -rw-rw-r-- 1 jenkins jenkins 2738 Sep 15 21:42 libmodule-build-tiny-perl_0.052-1.dsc -rw------- 1 jenkins jenkins 3976 Sep 18 10:05 rbuildlog.2cAKxAM /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1: total 92 -rw-r--r-- 1 jenkins jenkins 23949 Sep 18 10:05 build.log -rw-r--r-- 1 jenkins jenkins 2860 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2738 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1.dsc -rw-r--r-- 1 jenkins jenkins 12232 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_all.deb -rw-r--r-- 1 jenkins jenkins 4879 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5761 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1303 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 1801 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_source.changes -rw-r--r-- 1 jenkins jenkins 22980 Sep 18 10:05 libmodule-build-tiny-perl_0.052.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2: total 0 Thu Sep 18 10:05:49 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Sep 17 22:05:20 -12 2025 I: pbuilder-time-stamp: 1758189920 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libmodule-build-tiny-perl_0.052-1.dsc] I: copying [./libmodule-build-tiny-perl_0.052.orig.tar.gz] I: copying [./libmodule-build-tiny-perl_0.052-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libmodule-build-tiny-perl_0.052-1.dsc: no acceptable signature found dpkg-source: info: extracting libmodule-build-tiny-perl in libmodule-build-tiny-perl-0.052 dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052.orig.tar.gz dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/262544/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='f92566f95d45412786b7ed5ac615661d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='262544' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_QdHC --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1 --logfile b1/build.log libmodule-build-tiny-perl_0.052-1.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/262544/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl, libcpan-requirements-dynamic-perl, libextutils-cbuilder-perl, libextutils-config-perl, libextutils-helpers-perl, libextutils-installpaths-perl, libjson-pp-perl, libtest-harness-perl, libtest-simple-perl, perl-xs-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcpan-requirements-dynamic-perl; however: Package libcpan-requirements-dynamic-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-config-perl; however: Package libextutils-config-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-helpers-perl; however: Package libextutils-helpers-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-installpaths-perl; however: Package libextutils-installpaths-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcpan-requirements-dynamic-perl{a} libdebhelper-perl{a} libelf1t64{a} libextutils-config-perl{a} libextutils-hascompiler-perl{a} libextutils-helpers-perl{a} libextutils-installpaths-perl{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 50.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libextutils-config-perl all 0.010-1 [8364 B] Get: 31 http://deb.debian.org/debian unstable/main arm64 libextutils-hascompiler-perl all 0.025-1 [9232 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libcpan-requirements-dynamic-perl all 0.002-1 [7696 B] Get: 33 http://deb.debian.org/debian unstable/main arm64 libextutils-helpers-perl all 0.028-1 [11.9 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 libextutils-installpaths-perl all 0.014-1 [13.9 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Fetched 12.0 MB in 0s (108 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libextutils-config-perl. Preparing to unpack .../29-libextutils-config-perl_0.010-1_all.deb ... Unpacking libextutils-config-perl (0.010-1) ... Selecting previously unselected package libextutils-hascompiler-perl. Preparing to unpack .../30-libextutils-hascompiler-perl_0.025-1_all.deb ... Unpacking libextutils-hascompiler-perl (0.025-1) ... Selecting previously unselected package libcpan-requirements-dynamic-perl. Preparing to unpack .../31-libcpan-requirements-dynamic-perl_0.002-1_all.deb ... Unpacking libcpan-requirements-dynamic-perl (0.002-1) ... Selecting previously unselected package libextutils-helpers-perl. Preparing to unpack .../32-libextutils-helpers-perl_0.028-1_all.deb ... Unpacking libextutils-helpers-perl (0.028-1) ... Selecting previously unselected package libextutils-installpaths-perl. Preparing to unpack .../33-libextutils-installpaths-perl_0.014-1_all.deb ... Unpacking libextutils-installpaths-perl (0.014-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../34-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libextutils-config-perl (0.010-1) ... Setting up libextutils-helpers-perl (0.028-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libextutils-installpaths-perl (0.014-1) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libextutils-hascompiler-perl (0.025-1) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up libcpan-requirements-dynamic-perl (0.002-1) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libmodule-build-tiny-perl-0.052/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libmodule-build-tiny-perl_0.052-1_source.changes dpkg-buildpackage: info: source package libmodule-build-tiny-perl dpkg-buildpackage: info: source version 0.052-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-build-tiny-perl-0.052=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-build-tiny-perl-0.052=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Creating new 'Build' script for 'Module-Build-Tiny' version '0.052' dh_auto_build /usr/bin/perl Build cp lib/Module/Build/Tiny.pm blib/lib/Module/Build/Tiny.pm dh_auto_test /usr/bin/perl Build test --verbose 1 /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. t/simple.t .. Creating new 'Build' script for 'Foo-Bar' version '0.001' ok 1 - Ran Build.PL ok 2 - Build created ok 3 - Build is executable ok 4 - Build has shebang line with $^X ok 5 - _build_params created ok 6 - Could run Build ok 7 - Build output looks correctly ok 8 - created blib ok 9 - created blib/lib ok 10 - created blib/script ok 11 - Foo::Bar copied to blib ok 12 - pm contents are correct ok 13 - pm file in blib is readonly ok 14 - bin/simple copied to blib ok 15 - blib/script/simple contents are correct ok 16 - blib/script/simple is executable ok 17 - script in blib is readonly ok 18 - blib/script/simple has shebang line with $^X ok 19 - dist sharedir has been made ok 20 - dist sharedir file has been made ok 21 - moduole sharedir has been made ok 22 - module sharedir file has been made ok 23 - Dependency on Foo has been inserted ok 24 - Can run XSub Foo::Bar::foo ok 25 - Module gets manified properly ok 26 - Could run Build install ok 27 - Build install output looks correctly ok 28 - Module is installed ok 29 - Script is installed 1..29 ok All tests successful. Files=1, Tests=29, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.38 cusr 0.13 csys = 0.54 CPU) Result: PASS create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libmodule-build-tiny-perl/ /usr/bin/perl Build install --destdir /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl --create_packlist 0 Installing /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl/usr/share/perl5/Module/Build/Tiny.pm Installing /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl/usr/share/man/man3/Module::Build::Tiny.3pm dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libmodule-build-tiny-perl' in '../libmodule-build-tiny-perl_0.052-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libmodule-build-tiny-perl_0.052-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libmodule-build-tiny-perl_0.052-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/262544 and its subdirectories I: Current time: Wed Sep 17 22:05:48 -12 2025 I: pbuilder-time-stamp: 1758189948 Thu Sep 18 10:05:49 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Thu Sep 18 10:05:49 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Thu Sep 18 10:05:49 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Thu Sep 18 10:05:49 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-S9iTNZ' ==================================================================================== Wed Oct 21 16:28:51 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libmodule-build-tiny-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN 0.052-1" as arguments. Wed Oct 21 16:28:51 UTC 2026 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-KWr7l9xO" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Oct 21 16:28:51 UTC 2026 I: Downloading source for unstable/libmodule-build-tiny-perl=0.052-1 Reading package lists... NOTICE: 'libmodule-build-tiny-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (dsc) [2738 B] Get:2 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (tar) [23.0 kB] Get:3 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (diff) [2860 B] Fetched 28.6 kB in 0s (2259 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libmodule-build-tiny-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libmodule-build-tiny-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 28.6 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (dsc) [2738 B] Get:2 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (tar) [23.0 kB] Get:3 http://deb.debian.org/debian unstable/main libmodule-build-tiny-perl 0.052-1 (diff) [2860 B] Fetched 28.6 kB in 0s (2259 kB/s) Download complete and in download only mode ============================================================================= Re-Building libmodule-build-tiny-perl in unstable on arm64 on codethink03-arm64 now. Date: Wed Oct 21 17:28:52 BST 2026 Date UTC: Wed Oct 21 16:28:52 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_MUPI + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libmodule-build-tiny-perl = debian-installer -o libmodule-build-tiny-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libmodule-build-tiny-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_MUPI --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2 --logfile b2/build.log libmodule-build-tiny-perl_0.052-1.dsc I: Logging to b2/build.log W: /root/.pbuilderrc does not exist W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build I: Current time: Thu Oct 22 06:28:52 +14 2026 I: pbuilder-time-stamp: 1792600132 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libmodule-build-tiny-perl_0.052-1.dsc] I: copying [./libmodule-build-tiny-perl_0.052.orig.tar.gz] I: copying [./libmodule-build-tiny-perl_0.052-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libmodule-build-tiny-perl_0.052-1.dsc: no acceptable signature found dpkg-source: info: extracting libmodule-build-tiny-perl in libmodule-build-tiny-perl-0.052 dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052.orig.tar.gz dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Oct 21 16:29 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=4185693 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_MUPI --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2 --logfile b2/build.log libmodule-build-tiny-perl_0.052-1.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl, libcpan-requirements-dynamic-perl, libextutils-cbuilder-perl, libextutils-config-perl, libextutils-helpers-perl, libextutils-installpaths-perl, libjson-pp-perl, libtest-harness-perl, libtest-simple-perl, perl-xs-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcpan-requirements-dynamic-perl; however: Package libcpan-requirements-dynamic-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-config-perl; however: Package libextutils-config-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-helpers-perl; however: Package libextutils-helpers-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-installpaths-perl; however: Package libextutils-installpaths-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcpan-requirements-dynamic-perl{a} libdebhelper-perl{a} libelf1t64{a} libextutils-config-perl{a} libextutils-hascompiler-perl{a} libextutils-helpers-perl{a} libextutils-installpaths-perl{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 50.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libextutils-config-perl all 0.010-1 [8364 B] Get: 31 http://deb.debian.org/debian unstable/main arm64 libextutils-hascompiler-perl all 0.025-1 [9232 B] Get: 32 http://deb.debian.org/debian unstable/main arm64 libcpan-requirements-dynamic-perl all 0.002-1 [7696 B] Get: 33 http://deb.debian.org/debian unstable/main arm64 libextutils-helpers-perl all 0.028-1 [11.9 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 libextutils-installpaths-perl all 0.014-1 [13.9 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Fetched 12.0 MB in 1s (8956 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libextutils-config-perl. Preparing to unpack .../29-libextutils-config-perl_0.010-1_all.deb ... Unpacking libextutils-config-perl (0.010-1) ... Selecting previously unselected package libextutils-hascompiler-perl. Preparing to unpack .../30-libextutils-hascompiler-perl_0.025-1_all.deb ... Unpacking libextutils-hascompiler-perl (0.025-1) ... Selecting previously unselected package libcpan-requirements-dynamic-perl. Preparing to unpack .../31-libcpan-requirements-dynamic-perl_0.002-1_all.deb ... Unpacking libcpan-requirements-dynamic-perl (0.002-1) ... Selecting previously unselected package libextutils-helpers-perl. Preparing to unpack .../32-libextutils-helpers-perl_0.028-1_all.deb ... Unpacking libextutils-helpers-perl (0.028-1) ... Selecting previously unselected package libextutils-installpaths-perl. Preparing to unpack .../33-libextutils-installpaths-perl_0.014-1_all.deb ... Unpacking libextutils-installpaths-perl (0.014-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../34-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up libextutils-config-perl (0.010-1) ... Setting up libextutils-helpers-perl (0.028-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libextutils-installpaths-perl (0.014-1) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libextutils-hascompiler-perl (0.025-1) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up libcpan-requirements-dynamic-perl (0.002-1) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libmodule-build-tiny-perl-0.052/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libmodule-build-tiny-perl_0.052-1_source.changes dpkg-buildpackage: info: source package libmodule-build-tiny-perl dpkg-buildpackage: info: source version 0.052-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-build-tiny-perl-0.052=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libmodule-build-tiny-perl-0.052=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Creating new 'Build' script for 'Module-Build-Tiny' version '0.052' dh_auto_build /usr/bin/perl Build cp lib/Module/Build/Tiny.pm blib/lib/Module/Build/Tiny.pm dh_auto_test /usr/bin/perl Build test --verbose 1 /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. t/simple.t .. Creating new 'Build' script for 'Foo-Bar' version '0.001' ok 1 - Ran Build.PL ok 2 - Build created ok 3 - Build is executable ok 4 - Build has shebang line with $^X ok 5 - _build_params created ok 6 - Could run Build ok 7 - Build output looks correctly ok 8 - created blib ok 9 - created blib/lib ok 10 - created blib/script ok 11 - Foo::Bar copied to blib ok 12 - pm contents are correct ok 13 - pm file in blib is readonly ok 14 - bin/simple copied to blib ok 15 - blib/script/simple contents are correct ok 16 - blib/script/simple is executable ok 17 - script in blib is readonly ok 18 - blib/script/simple has shebang line with $^X ok 19 - dist sharedir has been made ok 20 - dist sharedir file has been made ok 21 - moduole sharedir has been made ok 22 - module sharedir file has been made ok 23 - Dependency on Foo has been inserted ok 24 - Can run XSub Foo::Bar::foo ok 25 - Module gets manified properly ok 26 - Could run Build install ok 27 - Build install output looks correctly ok 28 - Module is installed ok 29 - Script is installed 1..29 ok All tests successful. Files=1, Tests=29, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.26 cusr 0.07 csys = 0.35 CPU) Result: PASS create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libmodule-build-tiny-perl/ /usr/bin/perl Build install --destdir /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl --create_packlist 0 Installing /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl/usr/share/perl5/Module/Build/Tiny.pm Installing /build/reproducible-path/libmodule-build-tiny-perl-0.052/debian/libmodule-build-tiny-perl/usr/share/man/man3/Module::Build::Tiny.3pm dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libmodule-build-tiny-perl' in '../libmodule-build-tiny-perl_0.052-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libmodule-build-tiny-perl_0.052-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libmodule-build-tiny-perl_0.052-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/4185693 and its subdirectories I: Current time: Thu Oct 22 06:30:22 +14 2026 I: pbuilder-time-stamp: 1792600222 + false + set +x Wed Oct 21 16:30:22 UTC 2026 I: Signing ./b2/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo as libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc Wed Oct 21 16:30:22 UTC 2026 I: Signed ./b2/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo as ./b2/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc Wed Oct 21 16:30:22 UTC 2026 - build #2 for libmodule-build-tiny-perl/unstable/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Wed Oct 21 16:30:22 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-KWr7l9xO, removing. /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN: total 40 drwxrwxr-x 2 jenkins jenkins 4096 Sep 18 10:05 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 18 10:07 b2 -rw-rw-r-- 1 jenkins jenkins 2738 Sep 15 21:42 libmodule-build-tiny-perl_0.052-1.dsc -rw------- 1 jenkins jenkins 28226 Sep 18 10:05 rbuildlog.2cAKxAM /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1: total 92 -rw-r--r-- 1 jenkins jenkins 23949 Sep 18 10:05 build.log -rw-r--r-- 1 jenkins jenkins 2860 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2738 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1.dsc -rw-r--r-- 1 jenkins jenkins 12232 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_all.deb -rw-r--r-- 1 jenkins jenkins 4879 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5761 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1303 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 1801 Sep 18 10:05 libmodule-build-tiny-perl_0.052-1_source.changes -rw-r--r-- 1 jenkins jenkins 22980 Sep 18 10:05 libmodule-build-tiny-perl_0.052.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2: total 96 -rw-rw-r-- 1 jenkins jenkins 25904 Sep 18 10:07 build.log -rw-r--r-- 1 jenkins jenkins 2860 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2738 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1.dsc -rw-r--r-- 1 jenkins jenkins 12232 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1_all.deb -rw-rw-r-- 1 jenkins jenkins 4879 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5761 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 1303 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1_arm64.changes -rw-rw-r-- 1 jenkins jenkins 1801 Sep 18 10:07 libmodule-build-tiny-perl_0.052-1_source.changes -rw-r--r-- 1 jenkins jenkins 22980 Sep 18 10:07 libmodule-build-tiny-perl_0.052.orig.tar.gz Thu Sep 18 10:07:23 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Thu Sep 18 10:07:23 UTC 2025 I: libmodule-build-tiny-perl_0.052-1_arm64.changes: Format: 1.8 Date: Mon, 15 Sep 2025 23:28:56 +0200 Source: libmodule-build-tiny-perl Binary: libmodule-build-tiny-perl Architecture: all Version: 0.052-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libmodule-build-tiny-perl - tiny replacement for Module::Build Changes: libmodule-build-tiny-perl (0.052-1) unstable; urgency=medium . * Import upstream version 0.052. * Remove «Rules-Requires-Root: no», which is the current default. * Remove «Priority: optional», which is the current default. Checksums-Sha1: 90dae9029575f7039995a3e35817051447c00c7f 12232 libmodule-build-tiny-perl_0.052-1_all.deb 7ca5a6db62eddd068a38395f6250d36c3a147bd2 4879 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo Checksums-Sha256: 6a4c9ec795561a91ed3a1f141b8971f2878897b9f35a10a15f8a6cc6395bf591 12232 libmodule-build-tiny-perl_0.052-1_all.deb 2ce12cb5ba27651c34a220e4455607878e40d1c5fff6e5b90cf2fdb3a799fc4c 4879 libmodule-build-tiny-perl_0.052-1_arm64.buildinfo Files: 6a5f05af5973640c7ed866943f8a5620 12232 perl optional libmodule-build-tiny-perl_0.052-1_all.deb 00f1a9efbad28297b9f98ca5cbe485ec 4879 perl optional libmodule-build-tiny-perl_0.052-1_arm64.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libmodule-build-tiny-perl_0.052-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libmodule-build-tiny-perl_0.052-1.rbuild.log.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-09-18 10:05:49.023641577 +0000 +++ b2/build.log 2025-09-18 10:07:23.203752738 +0000 @@ -1,6 +1,7 @@ +W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build -I: Current time: Wed Sep 17 22:05:20 -12 2025 -I: pbuilder-time-stamp: 1758189920 +I: Current time: Thu Oct 22 06:28:52 +14 2026 +I: pbuilder-time-stamp: 1792600132 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -22,53 +23,84 @@ dpkg-source: info: unpacking libmodule-build-tiny-perl_0.052-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/262544/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Oct 21 16:29 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='f92566f95d45412786b7ed5ac615661d' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='262544' - PS1='# ' - PS2='> ' + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=4185693 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_QdHC --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1 --logfile b1/build.log libmodule-build-tiny-perl_0.052-1.dsc' - SUDO_GID='109' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/pbuilderrc_MUPI --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2 --logfile b2/build.log libmodule-build-tiny-perl_0.052-1.dsc' + SUDO_GID=109 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/262544/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -149,7 +181,7 @@ Get: 33 http://deb.debian.org/debian unstable/main arm64 libextutils-helpers-perl all 0.028-1 [11.9 kB] Get: 34 http://deb.debian.org/debian unstable/main arm64 libextutils-installpaths-perl all 0.014-1 [13.9 kB] Get: 35 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] -Fetched 12.0 MB in 0s (108 MB/s) +Fetched 12.0 MB in 1s (8956 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) @@ -309,7 +341,11 @@ fakeroot is already the newest version (1.37.1.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libmodule-build-tiny-perl-0.052/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libmodule-build-tiny-perl_0.052-1_source.changes +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libmodule-build-tiny-perl-0.052/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libmodule-build-tiny-perl_0.052-1_source.changes dpkg-buildpackage: info: source package libmodule-build-tiny-perl dpkg-buildpackage: info: source version 0.052-1 dpkg-buildpackage: info: source distribution unstable @@ -369,7 +405,7 @@ 1..29 ok All tests successful. -Files=1, Tests=29, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.38 cusr 0.13 csys = 0.54 CPU) +Files=1, Tests=29, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.26 cusr 0.07 csys = 0.35 CPU) Result: PASS create-stamp debian/debhelper-build-stamp dh_prep @@ -398,12 +434,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/4185693/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/262544 and its subdirectories -I: Current time: Wed Sep 17 22:05:48 -12 2025 -I: pbuilder-time-stamp: 1758189948 +I: removing directory /srv/workspace/pbuilder/4185693 and its subdirectories +I: Current time: Thu Oct 22 06:30:22 +14 2026 +I: pbuilder-time-stamp: 1792600222 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libmodule-build-tiny-perl_0.052-1.diff: 66.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libmodule-build-tiny-perl_0.052-1.diff.gz b2/build.log: 75.3% -- replaced with stdout Compressing the 1st log... b1/build.log: 76.1% -- replaced with stdout Thu Sep 18 10:07:24 UTC 2025 I: diffoscope 306 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libmodule-build-tiny-perl_unstable_arm64_1758190044 + touch /var/log/reproducible-builds/diffoscope_stamp_libmodule-build-tiny-perl_unstable_arm64_1758190044 + RESULT=0 + systemd-run '--description=diffoscope on libmodule-build-tiny-perl/0.052-1 in unstable/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_7-97159 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN --run-session -c jenkins-reproducible-unstable-diffoscope-36d8657c-7432-4952-8665-fe6d7dd759fc -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/dbd-tmp-eWozwsc ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/libmodule-build-tiny-perl_0.052-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/libmodule-build-tiny-perl_0.052-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/libmodule-build-tiny-perl_0.052-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1/libmodule-build-tiny-perl_0.052-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2/libmodule-build-tiny-perl_0.052-1_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_7-97159.service; invocation ID: de09f806222c49469da7174450c6d5db # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/libmodule-build-tiny-perl_0.052-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/libmodule-build-tiny-perl_0.052-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/libmodule-build-tiny-perl_0.052-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b1/libmodule-build-tiny-perl_0.052-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.VaXwN5bN/b2/libmodule-build-tiny-perl_0.052-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 206ms CPU time consumed: 171ms Memory peak: 17.2M (swap: 0B) _ _ _ _ _ _ _ _ _ | (_) |__ _ __ ___ ___ __| |_ _| | ___ | |__ _ _(_) | __| | | | | '_ \| '_ ` _ \ / _ \ / _` | | | | |/ _ \_____| '_ \| | | | | |/ _` | | | | |_) | | | | | | (_) | (_| | |_| | | __/_____| |_) | |_| | | | (_| | |_|_|_.__/|_| |_| |_|\___/ \__,_|\__,_|_|\___| |_.__/ \__,_|_|_|\__,_| _ _ _ | |_(_)_ __ _ _ _ __ ___ _ __| | _____| __| | '_ \| | | |_____| '_ \ / _ \ '__| | |_____| |_| | | | | |_| |_____| |_) | __/ | | | \__|_|_| |_|\__, | | .__/ \___|_| |_| |___/ |_| Thu Sep 18 10:07:25 UTC 2025 I: diffoscope 306 found no differences in the changes files, and a .buildinfo file also exists. Thu Sep 18 10:07:25 UTC 2025 I: libmodule-build-tiny-perl from unstable built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-09-18 10:07:25] INFO: Starting at 2025-09-18 10:07:25.439605 [2025-09-18 10:07:25] INFO: Generating the pages of 1 package(s) [2025-09-18 10:07:25] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/arm64/libmodule-build-tiny-perl didn't produce a buildlog, even though it has been built. [2025-09-18 10:07:25] CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/forky/amd64/libmodule-build-tiny-perl_0.052-1_amd64.buildinfo [2025-09-18 10:07:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/forky/amd64/libmodule-build-tiny-perl_0.052-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/amd64/libmodule-build-tiny-perl_0.052-1.diff.gz is missing [2025-09-18 10:07:25] CRITICAL: https://tests.reproducible-builds.org/debian/forky/arm64/libmodule-build-tiny-perl didn't produce a buildlog, even though it has been built. [2025-09-18 10:07:25] INFO: Finished at 2025-09-18 10:07:25.716309, took: 0:00:00.276707 Thu Sep 18 10:07:25 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/arm64/libmodule-build-tiny-perl.html Thu Sep 18 10:07:25 UTC 2025 I: Removing signed libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc files: removed './b1/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc' removed './b2/libmodule-build-tiny-perl_0.052-1_arm64.buildinfo.asc' 1758190045 arm64 unstable libmodule-build-tiny-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libmodule-build-tiny-perl_0.052-1.rbuild.log: 72.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libmodule-build-tiny-perl_0.052-1.rbuild.log.gz [2025-09-18 10:07:26] INFO: Starting at 2025-09-18 10:07:26.038019 [2025-09-18 10:07:26] INFO: Generating the pages of 1 package(s) [2025-09-18 10:07:26] CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/forky/amd64/libmodule-build-tiny-perl_0.052-1_amd64.buildinfo [2025-09-18 10:07:26] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/forky/amd64/libmodule-build-tiny-perl_0.052-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/amd64/libmodule-build-tiny-perl_0.052-1.diff.gz is missing [2025-09-18 10:07:26] CRITICAL: https://tests.reproducible-builds.org/debian/forky/arm64/libmodule-build-tiny-perl didn't produce a buildlog, even though it has been built. [2025-09-18 10:07:26] INFO: Finished at 2025-09-18 10:07:26.306414, took: 0:00:00.268398 All cleanup done. Thu Sep 18 10:07:26 UTC 2025 - total duration: 0h 2m 20s. Thu Sep 18 10:07:26 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-rgSFFSwt, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 2min 20.497s CPU time consumed: 3.105s Memory peak: 39.2M (swap: 0B)