Running as unit: rb-build-arm64_8-89303.service; invocation ID: 6383cfcb5f4440e6825ecef83ae0433a ==================================================================================== Wed Sep 17 11:34:28 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_8) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Wed Sep 17 11:34:28 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-xbjFd4tR" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Sep 17 11:34:28 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Wed Sep 17 11:34:28 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-qmSVZe' Wed Sep 17 11:34:28 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Wed Sep 17 11:34:28 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-QAjVHc' ok, let's check if libtext-qrcode-perl is building anywhere yet… ok, libtext-qrcode-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libtext-qrcode-perl in forky on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Wed Sep 17 11:34:30 UTC 2025 I: starting to build libtext-qrcode-perl/forky/arm64 on jenkins on '2025-09-17 11:34' Wed Sep 17 11:34:30 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_8/89303/console.log 1758108870 arm64 forky libtext-qrcode-perl Wed Sep 17 11:34:30 UTC 2025 I: Downloading source for forky/libtext-qrcode-perl=0.05-2 --2025-09-17 11:34:31-- http://deb.debian.org/debian/pool/main/libt/libtext-qrcode-perl/libtext-qrcode-perl_0.05-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2421 (2.4K) [text/prs.lines.tag] Saving to: ‘libtext-qrcode-perl_0.05-2.dsc’ 0K .. 100% 284M=0s 2025-09-17 11:34:31 (284 MB/s) - ‘libtext-qrcode-perl_0.05-2.dsc’ saved [2421/2421] --2025-09-17 11:34:31-- http://deb.debian.org/debian/pool/main/libt/libtext-qrcode-perl/libtext-qrcode-perl_0.05-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2421 (2.4K) [text/prs.lines.tag] Saving to: ‘libtext-qrcode-perl_0.05-2.dsc’ 0K .. 100% 284M=0s 2025-09-17 11:34:31 (284 MB/s) - ‘libtext-qrcode-perl_0.05-2.dsc’ saved [2421/2421] Wed Sep 17 11:34:31 UTC 2025 I: libtext-qrcode-perl_0.05-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libtext-qrcode-perl Binary: libtext-qrcode-perl Architecture: any Version: 0.05-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Text-QRCode Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-install-perl, libqrencode-dev, perl-xs-dev, perl:native, pkg-config Package-List: libtext-qrcode-perl deb perl optional arch=any Checksums-Sha1: d57220f3da6fdcb1a16adf0cf7aa6fea18564f63 60277 libtext-qrcode-perl_0.05.orig.tar.gz 7e69d80edf6b7fbd9ec301cebe02df74edbcc2d5 2420 libtext-qrcode-perl_0.05-2.debian.tar.xz Checksums-Sha256: 0d5471bed596ddcd891df271c1b7983a4e39373c984d0f1ed9cb2ec4d730a173 60277 libtext-qrcode-perl_0.05.orig.tar.gz e98240269e6f849ec5fb4bfe18a24e32dae292ae6aed3013de1ac1e78d9b4c6f 2420 libtext-qrcode-perl_0.05-2.debian.tar.xz Files: 95af0bd6bdc677479de93a697d030306 60277 libtext-qrcode-perl_0.05.orig.tar.gz ac34776587ae2b7321390f9e0d9069f0 2420 libtext-qrcode-perl_0.05-2.debian.tar.xz Dgit: 37b3737d7791efe4babc2e13e03c6127b74b5950 debian archive/debian/0.05-2 https://git.dgit.debian.org/libtext-qrcode-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmL6QO1fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbziQ/+MQuMrileLheMGlQlBeFltWq/vt6OdcKcv0onpN259lwLV63UpS1yOilZ llaEZVXEW8G2Cbzp0VGxksVmvRUvbrIA17V1XMejtt+X0TtcmNpvkUiKLUrv4gR5 PFgkggBtWlYJ9wTw6BqqRl/Z3e8XJL7mY1f0fknLUBRjp2xFAUIuwdXieMpgemWd Koy0pEP3PQTeWCpX9ALET2CrhhyfYTvhZj0IGo+BnnTD/yd4tdgIgmwwddWOkqpC lTtHtG337SJkb+8/fhcF2swIL+eYrUYvK5oDHws2qCGOZ6Gh/m3Y03/rkkYG+8Cc /DwbRbrCdauaMEnjm7apXoyt2cdxXi0m5M8BqdzakNj+1pNQWpBBVIU/zRN3ZC/e HmH4+MX+iKeuB2cy4UFsDbyEkx1NoNu5++Q+Ez3AC4J6bESe42SNtBece4HxV+Ep 5bXdx2/fTP89VQhZhzK45jQGKy5K/Qhska/jp5LzN1re2JqQM3P6xhSCV2WRPDnt BCNCyUsXmH+MuBC3dT3PGW3U2kL+BVohEpxyFWynvPdskzbm5lTFXkFIFj1X+jdO 3TfBH7Ar9QyqiZjFJvro50NJ62LwwI7cn+iEEltZ2/kNaVhme/RW0E4OYyemK5XL 1eAYccZFxAzOIvk7ydcgQL+XerFgEp0XmMz5YIGCRqrdY5Uco/o= =xIuq -----END PGP SIGNATURE----- Wed Sep 17 11:34:31 UTC 2025 I: Checking whether the package is not for us Wed Sep 17 11:34:31 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Wed Sep 17 11:34:31 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Wed Sep 17 11:34:31 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Wed Sep 17 11:34:31 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-zMufmk' ==================================================================================== Wed Sep 17 11:34:32 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libtext-qrcode-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L 0.05-2" as arguments. Wed Sep 17 11:34:32 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-w8dfaUMx" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Sep 17 11:34:32 UTC 2025 I: Downloading source for forky/libtext-qrcode-perl=0.05-2 Reading package lists... NOTICE: 'libtext-qrcode-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (dsc) [2421 B] Get:2 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (tar) [60.3 kB] Get:3 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (diff) [2420 B] Fetched 65.1 kB in 0s (923 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libtext-qrcode-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (dsc) [2421 B] Get:2 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (tar) [60.3 kB] Get:3 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (diff) [2420 B] Fetched 65.1 kB in 0s (923 kB/s) Download complete and in download only mode ============================================================================= Building libtext-qrcode-perl in forky on arm64 on codethink04-arm64 now. Date: Wed Sep 17 12:34:32 BST 2025 Date UTC: Wed Sep 17 11:34:32 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue Sep 16 23:34:32 -12 2025 I: pbuilder-time-stamp: 1758108872 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtext-qrcode-perl_0.05-2.dsc] I: copying [./libtext-qrcode-perl_0.05.orig.tar.gz] I: copying [./libtext-qrcode-perl_0.05-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libtext-qrcode-perl_0.05-2.dsc: no acceptable signature found dpkg-source: info: extracting libtext-qrcode-perl in libtext-qrcode-perl-0.05 dpkg-source: info: unpacking libtext-qrcode-perl_0.05.orig.tar.gz dpkg-source: info: unpacking libtext-qrcode-perl_0.05-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3142935/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='1dd11b34200e4965a29fdfa034502c80' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3142935' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_iOjE --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1 --logfile b1/build.log libtext-qrcode-perl_0.05-2.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3142935/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, libqrencode-dev, perl-xs-dev, perl:native, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libqrencode-dev; however: Package libqrencode-dev is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libperl-dev{a} libpipeline1{a} libpkgconf3{a} libqrencode-dev{a} libqrencode4{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} libyaml-tiny-perl{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget 0 packages upgraded, 40 newly installed, 0 to remove and 0 not upgraded. Need to get 12.4 MB of archives. After unpacking 51.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libfile-remove-perl all 1.61-2 [16.1 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libmodule-scandeps-perl all 1.37-1 [44.0 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get: 33 http://deb.debian.org/debian forky/main arm64 libmodule-install-perl all 1.21-2 [139 kB] Get: 34 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 35 http://deb.debian.org/debian forky/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 36 http://deb.debian.org/debian forky/main arm64 libqrencode4 arm64 4.1.1-2 [38.7 kB] Get: 37 http://deb.debian.org/debian forky/main arm64 libqrencode-dev arm64 4.1.1-2 [23.3 kB] Get: 38 http://deb.debian.org/debian forky/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 39 http://deb.debian.org/debian forky/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 40 http://deb.debian.org/debian forky/main arm64 pkg-config arm64 1.8.1-4 [14.0 kB] Fetched 12.4 MB in 0s (106 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../29-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../30-libmodule-scandeps-perl_1.37-1_all.deb ... Unpacking libmodule-scandeps-perl (1.37-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../31-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../32-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../33-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../34-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package libqrencode4:arm64. Preparing to unpack .../35-libqrencode4_4.1.1-2_arm64.deb ... Unpacking libqrencode4:arm64 (4.1.1-2) ... Selecting previously unselected package libqrencode-dev:arm64. Preparing to unpack .../36-libqrencode-dev_4.1.1-2_arm64.deb ... Unpacking libqrencode-dev:arm64 (4.1.1-2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../37-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../38-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package pkg-config:arm64. Preparing to unpack .../39-pkg-config_1.8.1-4_arm64.deb ... Unpacking pkg-config:arm64 (1.8.1-4) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libqrencode4:arm64 (4.1.1-2) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libqrencode-dev:arm64 (4.1.1-2) ... Setting up libmodule-scandeps-perl (1.37-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up pkg-config:arm64 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libtext-qrcode-perl-0.05/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtext-qrcode-perl_0.05-2_source.changes dpkg-buildpackage: info: source package libtext-qrcode-perl dpkg-buildpackage: info: source version 0.05-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Cannot determine perl version info from lib/Text/QRCode.pm Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Text::QRCode Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' QRCode.xs > QRCode.xsc Running Mkbootstrap for QRCode () chmod 644 "QRCode.bs" cp lib/Text/QRCode.pm blib/lib/Text/QRCode.pm "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 mv QRCode.xsc QRCode.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DOVER_LIBQRENCODE_2_0_0 -lqrencode -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.05\" -DXS_VERSION=\"0.05\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" QRCode.c rm -f blib/arch/auto/Text/QRCode/QRCode.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong -lqrencode QRCode.o -o blib/arch/auto/Text/QRCode/QRCode.so \ -lqrencode \ /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libqrencode.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libqrencode.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Text/QRCode/QRCode.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/01-plot.t t/02-defined.t # Testing Text::QRCode 0.05, Perl 5.040001, /usr/bin/perl t/00-load.t ..... 1..1 ok 1 - use Text::QRCode; ok t/01-plot.t ..... 1..2 ok 1 - use Text::QRCode; ok 2 - match test ok t/02-defined.t .. 1..2 ok 1 - use Text::QRCode; ok 2 - match test ok All tests successful. Files=3, Tests=5, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.23 cusr 0.04 csys = 0.31 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtext-qrcode-perl/ make -j12 install DESTDIR=/build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Text/QRCode/QRCode.so Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Text/QRCode.pm Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/share/man/man3/Text::QRCode.3pm make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtext-qrcode-perl' in '../libtext-qrcode-perl_0.05-2_arm64.deb'. dpkg-deb: building package 'libtext-qrcode-perl-dbgsym' in '../libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3142935 and its subdirectories I: Current time: Tue Sep 16 23:34:59 -12 2025 I: pbuilder-time-stamp: 1758108899 Wed Sep 17 11:34:59 UTC 2025 I: Signing ./b1/libtext-qrcode-perl_0.05-2_arm64.buildinfo as libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc Wed Sep 17 11:34:59 UTC 2025 I: Signed ./b1/libtext-qrcode-perl_0.05-2_arm64.buildinfo as ./b1/libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc Wed Sep 17 11:34:59 UTC 2025 - build #1 for libtext-qrcode-perl/forky/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Wed Sep 17 11:34:59 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-w8dfaUMx, removing. /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Sep 17 11:35 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 17 11:34 b2 -rw-rw-r-- 1 jenkins jenkins 2421 Aug 15 2022 libtext-qrcode-perl_0.05-2.dsc -rw------- 1 jenkins jenkins 3606 Sep 17 11:34 rbuildlog.Y4lkViX /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1: total 104 -rw-r--r-- 1 jenkins jenkins 26989 Sep 17 11:35 build.log -rw-r--r-- 1 jenkins jenkins 30904 Sep 17 11:35 libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2420 Sep 17 11:35 libtext-qrcode-perl_0.05-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2421 Sep 17 11:35 libtext-qrcode-perl_0.05-2.dsc -rw-r--r-- 1 jenkins jenkins 5254 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 6136 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2314 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 10376 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2148 Sep 17 11:35 libtext-qrcode-perl_0.05-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2: total 0 Wed Sep 17 11:35:00 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Sep 16 23:34:32 -12 2025 I: pbuilder-time-stamp: 1758108872 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtext-qrcode-perl_0.05-2.dsc] I: copying [./libtext-qrcode-perl_0.05.orig.tar.gz] I: copying [./libtext-qrcode-perl_0.05-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libtext-qrcode-perl_0.05-2.dsc: no acceptable signature found dpkg-source: info: extracting libtext-qrcode-perl in libtext-qrcode-perl-0.05 dpkg-source: info: unpacking libtext-qrcode-perl_0.05.orig.tar.gz dpkg-source: info: unpacking libtext-qrcode-perl_0.05-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3142935/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='1dd11b34200e4965a29fdfa034502c80' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3142935' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_iOjE --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1 --logfile b1/build.log libtext-qrcode-perl_0.05-2.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3142935/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, libqrencode-dev, perl-xs-dev, perl:native, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libqrencode-dev; however: Package libqrencode-dev is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libperl-dev{a} libpipeline1{a} libpkgconf3{a} libqrencode-dev{a} libqrencode4{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} libyaml-tiny-perl{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget 0 packages upgraded, 40 newly installed, 0 to remove and 0 not upgraded. Need to get 12.4 MB of archives. After unpacking 51.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libfile-remove-perl all 1.61-2 [16.1 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libmodule-scandeps-perl all 1.37-1 [44.0 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get: 33 http://deb.debian.org/debian forky/main arm64 libmodule-install-perl all 1.21-2 [139 kB] Get: 34 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 35 http://deb.debian.org/debian forky/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 36 http://deb.debian.org/debian forky/main arm64 libqrencode4 arm64 4.1.1-2 [38.7 kB] Get: 37 http://deb.debian.org/debian forky/main arm64 libqrencode-dev arm64 4.1.1-2 [23.3 kB] Get: 38 http://deb.debian.org/debian forky/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 39 http://deb.debian.org/debian forky/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 40 http://deb.debian.org/debian forky/main arm64 pkg-config arm64 1.8.1-4 [14.0 kB] Fetched 12.4 MB in 0s (106 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../29-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../30-libmodule-scandeps-perl_1.37-1_all.deb ... Unpacking libmodule-scandeps-perl (1.37-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../31-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../32-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../33-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../34-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package libqrencode4:arm64. Preparing to unpack .../35-libqrencode4_4.1.1-2_arm64.deb ... Unpacking libqrencode4:arm64 (4.1.1-2) ... Selecting previously unselected package libqrencode-dev:arm64. Preparing to unpack .../36-libqrencode-dev_4.1.1-2_arm64.deb ... Unpacking libqrencode-dev:arm64 (4.1.1-2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../37-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../38-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package pkg-config:arm64. Preparing to unpack .../39-pkg-config_1.8.1-4_arm64.deb ... Unpacking pkg-config:arm64 (1.8.1-4) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libqrencode4:arm64 (4.1.1-2) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libqrencode-dev:arm64 (4.1.1-2) ... Setting up libmodule-scandeps-perl (1.37-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up pkg-config:arm64 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libtext-qrcode-perl-0.05/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtext-qrcode-perl_0.05-2_source.changes dpkg-buildpackage: info: source package libtext-qrcode-perl dpkg-buildpackage: info: source version 0.05-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Cannot determine perl version info from lib/Text/QRCode.pm Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Text::QRCode Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' QRCode.xs > QRCode.xsc Running Mkbootstrap for QRCode () chmod 644 "QRCode.bs" cp lib/Text/QRCode.pm blib/lib/Text/QRCode.pm "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 mv QRCode.xsc QRCode.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DOVER_LIBQRENCODE_2_0_0 -lqrencode -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.05\" -DXS_VERSION=\"0.05\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" QRCode.c rm -f blib/arch/auto/Text/QRCode/QRCode.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong -lqrencode QRCode.o -o blib/arch/auto/Text/QRCode/QRCode.so \ -lqrencode \ /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libqrencode.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libqrencode.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Text/QRCode/QRCode.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/01-plot.t t/02-defined.t # Testing Text::QRCode 0.05, Perl 5.040001, /usr/bin/perl t/00-load.t ..... 1..1 ok 1 - use Text::QRCode; ok t/01-plot.t ..... 1..2 ok 1 - use Text::QRCode; ok 2 - match test ok t/02-defined.t .. 1..2 ok 1 - use Text::QRCode; ok 2 - match test ok All tests successful. Files=3, Tests=5, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.23 cusr 0.04 csys = 0.31 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtext-qrcode-perl/ make -j12 install DESTDIR=/build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Text/QRCode/QRCode.so Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Text/QRCode.pm Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/share/man/man3/Text::QRCode.3pm make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtext-qrcode-perl' in '../libtext-qrcode-perl_0.05-2_arm64.deb'. dpkg-deb: building package 'libtext-qrcode-perl-dbgsym' in '../libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3142935 and its subdirectories I: Current time: Tue Sep 16 23:34:59 -12 2025 I: pbuilder-time-stamp: 1758108899 Wed Sep 17 11:35:01 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Wed Sep 17 11:35:01 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Wed Sep 17 11:35:01 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Wed Sep 17 11:35:01 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-hZU6HC' ==================================================================================== Tue Oct 20 17:58:02 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libtext-qrcode-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L 0.05-2" as arguments. Tue Oct 20 17:58:02 UTC 2026 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-ZssOTlHt" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Oct 20 17:58:02 UTC 2026 I: Downloading source for forky/libtext-qrcode-perl=0.05-2 Reading package lists... NOTICE: 'libtext-qrcode-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (dsc) [2421 B] Get:2 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (tar) [60.3 kB] Get:3 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (diff) [2420 B] Fetched 65.1 kB in 0s (5057 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libtext-qrcode-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtext-qrcode-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 65.1 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (dsc) [2421 B] Get:2 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (tar) [60.3 kB] Get:3 http://deb.debian.org/debian forky/main libtext-qrcode-perl 0.05-2 (diff) [2420 B] Fetched 65.1 kB in 0s (5057 kB/s) Download complete and in download only mode ============================================================================= Re-Building libtext-qrcode-perl in forky on arm64 on codethink03-arm64 now. Date: Tue Oct 20 18:58:02 BST 2026 Date UTC: Tue Oct 20 17:58:02 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_6nXU + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libtext-qrcode-perl = debian-installer -o libtext-qrcode-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libtext-qrcode-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_6nXU --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2 --logfile b2/build.log libtext-qrcode-perl_0.05-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Oct 21 07:58:02 +14 2026 I: pbuilder-time-stamp: 1792519082 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libtext-qrcode-perl_0.05-2.dsc] I: copying [./libtext-qrcode-perl_0.05.orig.tar.gz] I: copying [./libtext-qrcode-perl_0.05-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libtext-qrcode-perl_0.05-2.dsc: no acceptable signature found dpkg-source: info: extracting libtext-qrcode-perl in libtext-qrcode-perl-0.05 dpkg-source: info: unpacking libtext-qrcode-perl_0.05.orig.tar.gz dpkg-source: info: unpacking libtext-qrcode-perl_0.05-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Oct 20 17:58 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=forky EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=b73e5a0d9fa842d4871a8bf50389242f LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=1165850 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_6nXU --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2 --logfile b2/build.log libtext-qrcode-perl_0.05-2.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, libqrencode-dev, perl-xs-dev, perl:native, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libqrencode-dev; however: Package libqrencode-dev is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libperl-dev{a} libpipeline1{a} libpkgconf3{a} libqrencode-dev{a} libqrencode4{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} libyaml-tiny-perl{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget 0 packages upgraded, 40 newly installed, 0 to remove and 0 not upgraded. Need to get 12.4 MB of archives. After unpacking 51.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libfile-remove-perl all 1.61-2 [16.1 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libmodule-scandeps-perl all 1.37-1 [44.0 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get: 33 http://deb.debian.org/debian forky/main arm64 libmodule-install-perl all 1.21-2 [139 kB] Get: 34 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 35 http://deb.debian.org/debian forky/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 36 http://deb.debian.org/debian forky/main arm64 libqrencode4 arm64 4.1.1-2 [38.7 kB] Get: 37 http://deb.debian.org/debian forky/main arm64 libqrencode-dev arm64 4.1.1-2 [23.3 kB] Get: 38 http://deb.debian.org/debian forky/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 39 http://deb.debian.org/debian forky/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 40 http://deb.debian.org/debian forky/main arm64 pkg-config arm64 1.8.1-4 [14.0 kB] Fetched 12.4 MB in 0s (74.3 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../29-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../30-libmodule-scandeps-perl_1.37-1_all.deb ... Unpacking libmodule-scandeps-perl (1.37-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../31-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../32-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../33-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../34-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package libqrencode4:arm64. Preparing to unpack .../35-libqrencode4_4.1.1-2_arm64.deb ... Unpacking libqrencode4:arm64 (4.1.1-2) ... Selecting previously unselected package libqrencode-dev:arm64. Preparing to unpack .../36-libqrencode-dev_4.1.1-2_arm64.deb ... Unpacking libqrencode-dev:arm64 (4.1.1-2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../37-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../38-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package pkg-config:arm64. Preparing to unpack .../39-pkg-config_1.8.1-4_arm64.deb ... Unpacking pkg-config:arm64 (1.8.1-4) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libqrencode4:arm64 (4.1.1-2) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libqrencode-dev:arm64 (4.1.1-2) ... Setting up libmodule-scandeps-perl (1.37-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up pkg-config:arm64 (1.8.1-4) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for forky I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libtext-qrcode-perl-0.05/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtext-qrcode-perl_0.05-2_source.changes dpkg-buildpackage: info: source package libtext-qrcode-perl dpkg-buildpackage: info: source version 0.05-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Cannot determine perl version info from lib/Text/QRCode.pm Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Text::QRCode Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' Running Mkbootstrap for QRCode () "/usr/bin/perl" "-Iinc" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' QRCode.xs > QRCode.xsc chmod 644 "QRCode.bs" "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 mv QRCode.xsc QRCode.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DOVER_LIBQRENCODE_2_0_0 -lqrencode -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.05\" -DXS_VERSION=\"0.05\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" QRCode.c cp lib/Text/QRCode.pm blib/lib/Text/QRCode.pm rm -f blib/arch/auto/Text/QRCode/QRCode.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong -lqrencode QRCode.o -o blib/arch/auto/Text/QRCode/QRCode.so \ -lqrencode \ /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libqrencode.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libqrencode.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Text/QRCode/QRCode.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/01-plot.t t/02-defined.t # Testing Text::QRCode 0.05, Perl 5.040001, /usr/bin/perl t/00-load.t ..... 1..1 ok 1 - use Text::QRCode; ok t/01-plot.t ..... 1..2 ok 1 - use Text::QRCode; ok 2 - match test ok t/02-defined.t .. 1..2 ok 1 - use Text::QRCode; ok 2 - match test ok All tests successful. Files=3, Tests=5, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.21 cusr 0.06 csys = 0.32 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtext-qrcode-perl/ make -j12 install DESTDIR=/build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Text/QRCode/QRCode.so Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Text/QRCode.pm Installing /build/reproducible-path/libtext-qrcode-perl-0.05/debian/libtext-qrcode-perl/usr/share/man/man3/Text::QRCode.3pm make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtext-qrcode-perl-dbgsym' in '../libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb'. dpkg-deb: building package 'libtext-qrcode-perl' in '../libtext-qrcode-perl_0.05-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1165850 and its subdirectories I: Current time: Wed Oct 21 07:58:36 +14 2026 I: pbuilder-time-stamp: 1792519116 + false + set +x Tue Oct 20 17:58:36 UTC 2026 I: Signing ./b2/libtext-qrcode-perl_0.05-2_arm64.buildinfo as libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc Tue Oct 20 17:58:36 UTC 2026 I: Signed ./b2/libtext-qrcode-perl_0.05-2_arm64.buildinfo as ./b2/libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc Tue Oct 20 17:58:36 UTC 2026 - build #2 for libtext-qrcode-perl/forky/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Tue Oct 20 17:58:36 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-ZssOTlHt, removing. /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L: total 44 drwxrwxr-x 2 jenkins jenkins 4096 Sep 17 11:35 b1 drwxrwxr-x 2 jenkins jenkins 4096 Sep 17 11:35 b2 -rw-rw-r-- 1 jenkins jenkins 2421 Aug 15 2022 libtext-qrcode-perl_0.05-2.dsc -rw------- 1 jenkins jenkins 30896 Sep 17 11:35 rbuildlog.Y4lkViX /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1: total 104 -rw-r--r-- 1 jenkins jenkins 26989 Sep 17 11:35 build.log -rw-r--r-- 1 jenkins jenkins 30904 Sep 17 11:35 libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2420 Sep 17 11:35 libtext-qrcode-perl_0.05-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2421 Sep 17 11:35 libtext-qrcode-perl_0.05-2.dsc -rw-r--r-- 1 jenkins jenkins 5254 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 6136 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2314 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 10376 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2148 Sep 17 11:35 libtext-qrcode-perl_0.05-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2: total 108 -rw-rw-r-- 1 jenkins jenkins 28928 Sep 17 11:35 build.log -rw-r--r-- 1 jenkins jenkins 30904 Sep 17 11:35 libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2420 Sep 17 11:35 libtext-qrcode-perl_0.05-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2421 Sep 17 11:35 libtext-qrcode-perl_0.05-2.dsc -rw-rw-r-- 1 jenkins jenkins 5254 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 6136 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 2314 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 10376 Sep 17 11:35 libtext-qrcode-perl_0.05-2_arm64.deb -rw-rw-r-- 1 jenkins jenkins 2148 Sep 17 11:35 libtext-qrcode-perl_0.05-2_source.changes Wed Sep 17 11:35:37 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Wed Sep 17 11:35:38 UTC 2025 I: libtext-qrcode-perl_0.05-2_arm64.changes: Format: 1.8 Date: Mon, 15 Aug 2022 14:48:13 +0200 Source: libtext-qrcode-perl Binary: libtext-qrcode-perl libtext-qrcode-perl-dbgsym Architecture: arm64 Version: 0.05-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libtext-qrcode-perl - module for generating text based QR Codes Changes: libtext-qrcode-perl (0.05-2) unstable; urgency=medium . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Remove constraints unnecessary since stretch: + Build-Depends: Drop versioned constraint on debhelper. * Bump debhelper dependency to >= 9, since that's what is used in debian/compat. * Bump debhelper from deprecated 9 to 13. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). . [ gregor herrmann ] * Update years of packaging copyright. * Declare compliance with Debian Policy 4.6.1. * Set Rules-Requires-Root: no. * Enable all hardening flags. * Add libmodule-install-perl to Build-Depends. Checksums-Sha1: 7f0686d37324104b74980080b2f8c9b5fa9492d0 30904 libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb 687dd9dcb10649f2cf2fb94365513823e0e19ff6 5254 libtext-qrcode-perl_0.05-2_arm64.buildinfo 7c3c90bb54d188432b17688bcd5ef9814aa94c92 10376 libtext-qrcode-perl_0.05-2_arm64.deb Checksums-Sha256: aa04c6bd9c0f657e0c3c23965e45c6babdd601002035dbbac66a88b3a0efd3d7 30904 libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb bc482da3568dd689620b75a309c48eb703d578ea35e9a0a1f5e1d3cae6d81d2a 5254 libtext-qrcode-perl_0.05-2_arm64.buildinfo dca0e187ba1fe2da0d731e6486d860a5a8df93419decd5cd5dce67659c2da526 10376 libtext-qrcode-perl_0.05-2_arm64.deb Files: bb57153a6f5bdd7354cba41cf68196f8 30904 debug optional libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb 0c0b2b181dea14d6d0e938b114381167 5254 perl optional libtext-qrcode-perl_0.05-2_arm64.buildinfo 16dd0a8b7defe276bb10da2ce4f41290 10376 perl optional libtext-qrcode-perl_0.05-2_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/forky/arm64/libtext-qrcode-perl_0.05-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libtext-qrcode-perl_0.05-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-09-17 11:35:00.389993924 +0000 +++ b2/build.log 2025-09-17 11:35:37.458040998 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Tue Sep 16 23:34:32 -12 2025 -I: pbuilder-time-stamp: 1758108872 +I: Current time: Wed Oct 21 07:58:02 +14 2026 +I: pbuilder-time-stamp: 1792519082 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration @@ -22,53 +22,85 @@ dpkg-source: info: unpacking libtext-qrcode-perl_0.05-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3142935/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Oct 20 17:58 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='forky' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=forky + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='1dd11b34200e4965a29fdfa034502c80' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3142935' - PS1='# ' - PS2='> ' + INVOCATION_ID=b73e5a0d9fa842d4871a8bf50389242f + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=1165850 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_iOjE --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1 --logfile b1/build.log libtext-qrcode-perl_0.05-2.dsc' - SUDO_GID='109' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/pbuilderrc_6nXU --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2 --logfile b2/build.log libtext-qrcode-perl_0.05-2.dsc' + SUDO_GID=109 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3142935/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -153,7 +185,7 @@ Get: 38 http://deb.debian.org/debian forky/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 39 http://deb.debian.org/debian forky/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 40 http://deb.debian.org/debian forky/main arm64 pkg-config arm64 1.8.1-4 [14.0 kB] -Fetched 12.4 MB in 0s (106 MB/s) +Fetched 12.4 MB in 0s (74.3 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) @@ -328,7 +360,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libtext-qrcode-perl-0.05/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtext-qrcode-perl_0.05-2_source.changes +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for forky +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libtext-qrcode-perl-0.05/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtext-qrcode-perl_0.05-2_source.changes dpkg-buildpackage: info: source package libtext-qrcode-perl dpkg-buildpackage: info: source version 0.05-2 dpkg-buildpackage: info: source distribution unstable @@ -353,13 +389,13 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libtext-qrcode-perl-0.05' -"/usr/bin/perl" "-Iinc" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' QRCode.xs > QRCode.xsc Running Mkbootstrap for QRCode () +"/usr/bin/perl" "-Iinc" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' QRCode.xs > QRCode.xsc chmod 644 "QRCode.bs" -cp lib/Text/QRCode.pm blib/lib/Text/QRCode.pm "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- QRCode.bs blib/arch/auto/Text/QRCode/QRCode.bs 644 mv QRCode.xsc QRCode.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DOVER_LIBQRENCODE_2_0_0 -lqrencode -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.05\" -DXS_VERSION=\"0.05\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" QRCode.c +cp lib/Text/QRCode.pm blib/lib/Text/QRCode.pm rm -f blib/arch/auto/Text/QRCode/QRCode.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtext-qrcode-perl-0.05=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong -lqrencode QRCode.o -o blib/arch/auto/Text/QRCode/QRCode.so \ -lqrencode \ @@ -392,7 +428,7 @@ ok 2 - match test ok All tests successful. -Files=3, Tests=5, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.23 cusr 0.04 csys = 0.31 CPU) +Files=3, Tests=5, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.21 cusr 0.06 csys = 0.32 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtext-qrcode-perl-0.05' create-stamp debian/debhelper-build-stamp @@ -428,8 +464,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libtext-qrcode-perl' in '../libtext-qrcode-perl_0.05-2_arm64.deb'. dpkg-deb: building package 'libtext-qrcode-perl-dbgsym' in '../libtext-qrcode-perl-dbgsym_0.05-2_arm64.deb'. +dpkg-deb: building package 'libtext-qrcode-perl' in '../libtext-qrcode-perl_0.05-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libtext-qrcode-perl_0.05-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -437,12 +473,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/1165850/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3142935 and its subdirectories -I: Current time: Tue Sep 16 23:34:59 -12 2025 -I: pbuilder-time-stamp: 1758108899 +I: removing directory /srv/workspace/pbuilder/1165850 and its subdirectories +I: Current time: Wed Oct 21 07:58:36 +14 2026 +I: pbuilder-time-stamp: 1792519116 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libtext-qrcode-perl_0.05-2.diff: 67.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libtext-qrcode-perl_0.05-2.diff.gz b2/build.log: 75.6% -- replaced with stdout Compressing the 1st log... b1/build.log: 76.2% -- replaced with stdout Wed Sep 17 11:35:38 UTC 2025 I: diffoscope 306 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libtext-qrcode-perl_forky_arm64_1758108938 + touch /var/log/reproducible-builds/diffoscope_stamp_libtext-qrcode-perl_forky_arm64_1758108938 + RESULT=0 + systemd-run '--description=diffoscope on libtext-qrcode-perl/0.05-2 in forky/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_8-89303 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L --run-session -c jenkins-reproducible-forky-diffoscope-3fdf9636-1215-496d-92c3-d07bba5bc7d9 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/dbd-tmp-0em7nFy ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/libtext-qrcode-perl_0.05-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/libtext-qrcode-perl_0.05-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/libtext-qrcode-perl_0.05-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1/libtext-qrcode-perl_0.05-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2/libtext-qrcode-perl_0.05-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_8-89303.service; invocation ID: abf09e45417c4247ab8e07a8c086b9b7 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/libtext-qrcode-perl_0.05-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/libtext-qrcode-perl_0.05-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/libtext-qrcode-perl_0.05-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b1/libtext-qrcode-perl_0.05-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.rmxKXd7L/b2/libtext-qrcode-perl_0.05-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 219ms CPU time consumed: 177ms Memory peak: 18.2M (swap: 0B) _ _ _ _ _ _ | (_) |__ | |_ _____ _| |_ __ _ _ __ ___ ___ __| | ___ _ __ | | | '_ \| __/ _ \ \/ / __|____ / _` | '__/ __/ _ \ / _` |/ _ \_____| '_ \ | | | |_) | || __/> <| ||_____| (_| | | | (_| (_) | (_| | __/_____| |_) | |_|_|_.__/ \__\___/_/\_\\__| \__, |_| \___\___/ \__,_|\___| | .__/ |_| |_| _ ___ _ __| | / _ \ '__| | | __/ | | | \___|_| |_| Wed Sep 17 11:42:11 UTC 2025 I: diffoscope 306 found no differences in the changes files, and a .buildinfo file also exists. Wed Sep 17 11:42:11 UTC 2025 I: libtext-qrcode-perl from forky built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-09-17 11:42:12] INFO: Starting at 2025-09-17 11:42:12.344712 [2025-09-17 11:42:12] INFO: Generating the pages of 1 package(s) [2025-09-17 11:42:12] CRITICAL: https://tests.reproducible-builds.org/debian/forky/arm64/libtext-qrcode-perl didn't produce a buildlog, even though it has been built. [2025-09-17 11:42:12] INFO: Finished at 2025-09-17 11:42:12.729192, took: 0:00:00.384484 Wed Sep 17 11:42:12 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/forky/arm64/libtext-qrcode-perl.html Wed Sep 17 11:42:12 UTC 2025 I: Removing signed libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc files: removed './b1/libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc' removed './b2/libtext-qrcode-perl_0.05-2_arm64.buildinfo.asc' 1758109332 arm64 forky libtext-qrcode-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libtext-qrcode-perl_0.05-2.rbuild.log: 72.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libtext-qrcode-perl_0.05-2.rbuild.log.gz [2025-09-17 11:42:13] INFO: Starting at 2025-09-17 11:42:13.182205 [2025-09-17 11:42:13] INFO: Generating the pages of 1 package(s) [2025-09-17 11:42:13] INFO: Finished at 2025-09-17 11:42:13.513984, took: 0:00:00.331783 All cleanup done. Wed Sep 17 11:42:13 UTC 2025 - total duration: 0h 7m 43s. Wed Sep 17 11:42:13 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-xbjFd4tR, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 7min 45.318s CPU time consumed: 3.430s Memory peak: 38.5M (swap: 0B)