Running as unit: rb-build-arm64_8-94562.service; invocation ID: 89da6187ad2b4746844850e7a07d3781 ==================================================================================== Fri Oct 31 16:00:17 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_8) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Fri Oct 31 16:00:17 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-lVblDXvR" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Oct 31 16:00:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Oct 31 16:00:18 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-ca3j5N' Fri Oct 31 16:00:18 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Oct 31 16:00:18 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-MJWOv1' ok, let's check if libscalar-type-perl is building anywhere yet… ok, libscalar-type-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libscalar-type-perl in unstable on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Oct 31 16:00:20 UTC 2025 I: starting to build libscalar-type-perl/unstable/arm64 on jenkins on '2025-10-31 16:00' Fri Oct 31 16:00:20 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_8/94562/console.log 1761926420 arm64 unstable libscalar-type-perl Fri Oct 31 16:00:20 UTC 2025 I: Downloading source for unstable/libscalar-type-perl=1.0.1-1 --2025-10-31 16:00:20-- http://deb.debian.org/debian/pool/main/libs/libscalar-type-perl/libscalar-type-perl_1.0.1-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2511 (2.5K) [text/prs.lines.tag] Saving to: ‘libscalar-type-perl_1.0.1-1.dsc’ 0K .. 100% 286M=0s 2025-10-31 16:00:20 (286 MB/s) - ‘libscalar-type-perl_1.0.1-1.dsc’ saved [2511/2511] --2025-10-31 16:00:20-- http://deb.debian.org/debian/pool/main/libs/libscalar-type-perl/libscalar-type-perl_1.0.1-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2511 (2.5K) [text/prs.lines.tag] Saving to: ‘libscalar-type-perl_1.0.1-1.dsc’ 0K .. 100% 286M=0s 2025-10-31 16:00:20 (286 MB/s) - ‘libscalar-type-perl_1.0.1-1.dsc’ saved [2511/2511] Fri Oct 31 16:00:20 UTC 2025 I: libscalar-type-perl_1.0.1-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libscalar-type-perl Binary: libscalar-type-perl Architecture: any Version: 1.0.1-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Scalar-Type Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libcapture-tiny-perl , libscalar-list-utils-perl , libtest-simple-perl , libtest2-suite-perl , perl-xs-dev, perl:native Package-List: libscalar-type-perl deb perl optional arch=any Checksums-Sha1: 57b6b8188afe0fcda94aae93377914ef85d18406 24570 libscalar-type-perl_1.0.1.orig.tar.gz 127f651724d38735d7376daadd837c6ce4545258 2000 libscalar-type-perl_1.0.1-1.debian.tar.xz Checksums-Sha256: 97ad94ba5a46005d9b3e589acb8b051b1399dffdf461abf7fc7c7def5f019ec5 24570 libscalar-type-perl_1.0.1.orig.tar.gz 8dc37384b64ff7c2d71110cda05b02fbaa105f5a411e7241eaf61a68753140d2 2000 libscalar-type-perl_1.0.1-1.debian.tar.xz Files: e10f19648d0bf79728e48142c2d7d873 24570 libscalar-type-perl_1.0.1.orig.tar.gz 5df2bf91ec09f64bf6f222242c128e8e 2000 libscalar-type-perl_1.0.1-1.debian.tar.xz Dgit: e00b786724f7793d444fcbc0ebb25510ed48ff89 debian archive/debian/1.0.1-1 https://git.dgit.debian.org/libscalar-type-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmY8BDFfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbUww/9FVQBTLwi4RKnISSDuSWVeRTdpKAeVZwCweq/nx56r5rFDerqY77CMIlg cT8nrjv7yhABqhdWtDwXih3vECpXDngU5+JeFjbrO47Zoc5+u/3crPchbrG/5y07 itaLIW1omZVy+GvpXLs3994fMO2t/F9UJVvo4/jQe9OJMpVC9MhZlZCoXY5AI1wi lueNIhiL21cUA19CWiKMGADfnTypag34NdZ3aj9hz0vKmA/yuE7qYST/goks38CT 7XH2jPJJPJzPVyQO2i34Ytvmca15EmjhppIW98TSYW56acQqHy9/p9uDD5OEuIH+ QTCLX2fQS9q7gcYTlfrL6QfdzxNNeM0fOeoqQFpXpEY77kW0cyOW8BZkxOFeg01c DXFntZMXryfRerwrphPvsDr5xZZE6YMYlcHRykHAO2XtBSr/UXhN0fNhXgA7vk1W FJnLbpfuli0oREp1ntNZgZ7hY6EotKHhDX7s6JQadsbze1R7pwtJtOy+6y4bmwih Ao2qv2nCULHUIeF2Qcd6fjEAZ3FpKc7sj9Y7MIFL8QFPkvPm9Vs+XFyD2CZTlQXt SY6aIv6MLo4Nzk648QTwyHL1iozkE0fpYDQZBIj35yZstWD0UHIAsYVMSS13jKI+ 8ZAHmMcV8GgOYf92g7frilWEekrWL0AaZZcfAXGCID9OXxHn9bw= =ijVU -----END PGP SIGNATURE----- Fri Oct 31 16:00:20 UTC 2025 I: Checking whether the package is not for us Fri Oct 31 16:00:20 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Fri Oct 31 16:00:20 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Fri Oct 31 16:00:20 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Oct 31 16:00:20 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-lZz8Fm' ==================================================================================== Fri Oct 31 16:00:21 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libscalar-type-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM 1.0.1-1" as arguments. Fri Oct 31 16:00:21 UTC 2025 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-UoUbMiIA" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Oct 31 16:00:21 UTC 2025 I: Downloading source for unstable/libscalar-type-perl=1.0.1-1 Reading package lists... NOTICE: 'libscalar-type-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 29.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (dsc) [2511 B] Get:2 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (tar) [24.6 kB] Get:3 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (diff) [2000 B] Fetched 29.1 kB in 0s (425 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libscalar-type-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 29.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (dsc) [2511 B] Get:2 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (tar) [24.6 kB] Get:3 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (diff) [2000 B] Fetched 29.1 kB in 0s (425 kB/s) Download complete and in download only mode ============================================================================= Building libscalar-type-perl in unstable on arm64 on codethink04-arm64 now. Date: Fri Oct 31 16:00:21 GMT 2025 Date UTC: Fri Oct 31 16:00:21 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 04:00:22 -12 2025 I: pbuilder-time-stamp: 1761926422 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libscalar-type-perl_1.0.1-1.dsc] I: copying [./libscalar-type-perl_1.0.1.orig.tar.gz] I: copying [./libscalar-type-perl_1.0.1-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libscalar-type-perl_1.0.1-1.dsc: no acceptable signature found dpkg-source: info: extracting libscalar-type-perl in libscalar-type-perl-1.0.1 dpkg-source: info: unpacking libscalar-type-perl_1.0.1.orig.tar.gz dpkg-source: info: unpacking libscalar-type-perl_1.0.1-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3498572/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='ba4843b62a7a4b9ab24674df150d9353' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3498572' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_TUSa --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1 --logfile b1/build.log libscalar-type-perl_1.0.1-1.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3498572/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcapture-tiny-perl, libscalar-list-utils-perl, libtest-simple-perl, libtest2-suite-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19964 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcapture-tiny-perl; however: Package libcapture-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest2-suite-perl; however: Package libtest2-suite-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtest-simple-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 12.8 MB of archives. After unpacking 52.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.194-1 [184 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2-16 arm64 2.15.1+dfsg-0.3 [591 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libcapture-tiny-perl all 0.50-1 [24.6 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 libtest-simple-perl all 1.302214-1 [734 kB] Fetched 12.8 MB in 0s (158 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19964 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.194-1_arm64.deb ... Unpacking libelf1t64:arm64 (0.194-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.15.1+dfsg-0.3_arm64.deb ... Unpacking libxml2-16:arm64 (2.15.1+dfsg-0.3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../29-libcapture-tiny-perl_0.50-1_all.deb ... Unpacking libcapture-tiny-perl (0.50-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../30-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libtest-simple-perl. Preparing to unpack .../31-libtest-simple-perl_1.302214-1_all.deb ... Unpacking libtest-simple-perl (1.302214-1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.15.1+dfsg-0.3) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.194-1) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up libcapture-tiny-perl (0.50-1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libtest-simple-perl (1.302214-1) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libscalar-type-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libscalar-type-perl_1.0.1-1_source.changes dpkg-buildpackage: info: source package libscalar-type-perl dpkg-buildpackage: info: source version 1.0.1-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scalar::Type Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' Running Mkbootstrap for Type () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Type.xs > Type.xsc chmod 644 "Type.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 cp lib/Test2/Compare/Type.pm blib/lib/Test2/Compare/Type.pm cp lib/Test2/Tools/Type.pm blib/lib/Test2/Tools/Type.pm cp lib/Test2/Tools/Type/Extras.pm blib/lib/Test2/Tools/Type/Extras.pm cp lib/Scalar/Type.pm blib/lib/Scalar/Type.pm mv Type.xsc Type.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Type.c rm -f blib/arch/auto/Scalar/Type/Type.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Type.o -o blib/arch/auto/Scalar/Type/Type.so \ \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Scalar/Type/Type.so Manifying 4 pod documents make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bool.t .............. # Seeded srand with seed '20251031' from local date. ok 1 - type(1 == 1) is BOOL ok 2 - type(1 == 0) is BOOL ok 3 - is_bool says yes for (1 == 1) ok 4 - is_bool says yes for (1 == 0) ok 5 - but it says no for plain old 1 (otherwise indistinguishable from (1 == 1)) ok 6 - and it says no for plain old '' (otherwise indistinguishable from (1 == 0)) 1..6 ok t/pod-coverage.t ...... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.t ............... skipped: Test::Pod 1.18 required for testing POD t/sizeof.t ............ # Seeded srand with seed '20251031' from local date. ok 1 - sizeof(integer) { ok 1 - sizeof(int) is correct 1..1 } ok 2 - sizeof(number) { ok 1 - sizeof(float) is correct 1..1 } ok 3 - sizeof(whatever) { ok 1 - sizeof() requires an argument ok 2 - sizeof()'s arg must be plausibly numeric 1..2 } 1..3 ok t/test2-tools-type.t .. # Seeded srand with seed '20251031' from local date. ok 1 - extra functions aren't available unless asked for ok 2 - show supported types { ok 1 - default types ok 2 - default types doesn't include the extras ok 3 - :extras makes extras visible 1..3 } ok 3 - is_* tests { ok 1 - test names emitted correctly when supplied ok 2 - no name supplied? no name emitted ok 3 - is_integer(1) Pass ok 4 - is_integer(1.2) Fail ok 5 - is_integer("1") Fail ok 6 - is_number(1) Pass ok 7 - is_number(1.2) Pass ok 8 - is_number("1") Fail ok 9 - is_positive(1.2) Pass ok 10 - is_positive(-1.2) Fail ok 11 - is_negative(-1.2) Pass ok 12 - is_negative(1.2) Fail ok 13 - is_positive("1.2") Pass ok 14 - is_negative("-1.2") Pass ok 15 - is_ref(1) Fail ok 16 - is_ref(\1) Pass ok 17 - is_object(1) Fail ok 18 - is_object(bless {}) Pass ok 19 - is_hashref([]) Fail ok 20 - is_hashref({}) Pass ok 21 - is_arrayref({}) Fail ok 22 - is_arrayref([]) Pass ok 23 - is_scalarref(sub {}) Fail ok 24 - is_scalarref(\"") Pass ok 25 - is_coderef(\"" Fail ok 26 - is_coderef(sub {}) Pass ok 27 - is_globref(*is_integer) Fail ok 28 - is_globref(\*is_integer) Pass ok 29 - is_refref(\1) Fail ok 30 - is_refref(\\1) Pass ok 31 - is_regex(1) Fail ok 32 - is_regex(qr/abc/) Pass ok 33 - is_bool(1==1) Pass ok 34 - is_bool(1==2) Pass ok 35 - is_bool(1) Fail ok 36 - is_integer(1==1) Fail ok 37 - is_number(1==1) Fail ok 38 - is_integer(1==2) Fail ok 39 - is_number(1==2) Fail ok 40 - regex_supported on your perl ok 41 - bool_supported on your perl 1..41 } ok 4 - type() tests { ok 1 - failed test, op and name emitted in diagnostics are correct ok 2 - failed negated test, op emitted in diagnostics is correct ok 3 - failed test, op and multi-name emitted in diagnostics are correct ok 4 - failed test, op and name with 'has value' emitted in diagnostics are correct ok 5 - failed test, op and name with another checker emitted in diagnostics are correct ok 6 - is(1, type('integer')) Ok ok 7 - is(1.2, type('integer')) Fail ok 8 - is(1, !type('integer')) Fail ok 9 - is(1.2, !type('integer')) Ok ok 10 - is(1.2, type('number')) Ok ok 11 - is('1.2', !type('positive', 'number')) Ok ok 12 - is('1.2', type('positive', 'number')) Fail ok 13 - is(1.2, type('positive', 'number')) Ok ok 14 - is(-1.2, type('positive', 'number')) Fail ok 15 - is(-1.2, type('negative', 'number')) Ok ok 16 - is(-1.2, type('negative', 'integer')) Fail ok 17 - is(-1.2, type('number', -1.1)) Fail ok 18 - is(-1.2, type('number', -1.2)) Ok ok 19 - is(4, type(integer => in_set(1, 5, 8))) Fail ok 20 - is(4, type(integer => in_set(1, 4, 8))) Ok ok 21 - is({ ... }, type(hashref => { same })) Ok ok 22 - is({ ... }, type(hashref => { not the same })) Fail ok 23 - is(bless({ ... }), type(!type('object'), hashref => { same })) Fail ok 24 - is(1==1, type('bool')) Ok ok 25 - is(1==2, type('bool')) Ok ok 26 - is(1.2, type('bool')) Fail ok 27 - argument is mandatory ok 28 - exception: 'mammal' isn't a valid argument to type() ok 29 - exception: random data isn't a valid argument either 1..29 } ok 5 - checks don't mess with types { ok 1 - starting with an int ok 2 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally un-intify an int ok 3 - starting with a float ok 4 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally intify a float ok 5 - starting with a string ok 6 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally numify a string 1..6 } 1..5 ok t/types.t ............. # Seeded srand with seed '20251031' from local date. ok 1 - is_integer { ok 1 - 0 is an integer ok 2 - -0 is an integer ok 3 - 1 is an integer ok 4 - -1 is an integer ok 5 - "1" is not an integer ok 6 - 1.0 is not an integer ok 7 - 1.1 is not an integer ok 8 - 0.0 is not an integer ok 9 - 0x12 is an integer ok 10 - "0x12" is not an integer ok 11 - "1" + 0 gets its IV slot filled, is an integer ok 12 - after undef-ing, it's no longer an integer 1..12 } ok 2 - is_number { ok 1 - 1 is a number ok 2 - 1.0 is a number ok 3 - 1.1 is a number ok 4 - 0.0 is a number ok 5 - "1" is not a number ok 6 - "1.0" is not a number ok 7 - "0x12" is not a number ok 8 - 0x12 is a number ok 9 - "12.10" is not a number ok 10 - "12.10" is still not a number after being used in a numeric context # SV = PVNV(0xaaaad3548f30) at 0xaaaad34c05d8 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 12 # NV = 12.1 # PV = 0xaaaad32ebd40 "12.10"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 1..10 } ok 3 - integers written as exponents are weird { ok 1 - 32 bit-friendly exp ints { ok 1 - 1e2 is not an integer (but it oughta be!) ok 2 - ... but it is a number ok 3 - -1e2 is not an integer (but it oughta be!) ok 4 - ... but it is a number ok 5 - 1e2 + 0 is an integer ok 6 - 0 + 1e2 is an integer ok 7 - -1e2 + 0 is an integer 1..7 } ok 2 - 32 bit-unfriendly, 64 bit-friendly exp ints { ok 1 - 1e10 is not an integer (but it oughta be on 64 bit machines!) ok 2 - ... but it is a number ok 3 - -1e10 is not an integer (but it oughta be on 64 bit machines!) ok 4 - ... but it is a number ok 5 - 1e10 + 0 is an integer ok 6 - 0 + 1e10 is an integer ok 7 - -1e10 + 0 is an integer 1..7 } ok 3 - 64 bit-unfriendly exp ints { ok 1 - 1e20 is not an integer ok 2 - ... but it is a number ok 3 - -1e20 is not an integer ok 4 - ... but it is a number ok 5 - 1e20 + 0 is not an integer ok 6 - ... but it is a number ok 7 - 0 + 1e20 is not an integer ok 8 - ... but it is a number ok 9 - -1e20 + 0 is not an integer ok 10 - ... but it is a number 1..10 } 1..3 } ok 4 - string subsequently used as an int or float { ok 1 - '007' { ok 1 - after being treated as an int it still has its original value ok 2 - and it's not become an integer as far as we're concerned # SV = PVIV(0xaaaad2983398) at 0xaaaad35ba0e8 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 # PV = 0xaaaad35b2850 "007"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 1..2 } ok 2 - '007.5' { ok 1 - after being treated as a float it still has its original value ok 2 - and it's not become a float as far as we're concerned # SV = PVNV(0xaaaad3548d50) at 0xaaaad35ba2e0 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pNOK,pPOK) # IV = 0 # NV = 7.5 # PV = 0xaaaad35bc330 "007.5"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 1..2 } ok 3 - '7' { ok 1 - this does become an int after a numeric operation # SV = PVIV(0xaaaad2983638) at 0xaaaad35ba4f0 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 # PV = 0xaaaad35be2d0 "7"\0 # CUR = 1 # LEN = 16 # COW_REFCNT = 1 1..1 } ok 4 - '7.5' { ok 1 - this does become a float after a numeric operation # SV = PVNV(0xaaaad3548eb0) at 0xaaaad35ba6a0 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 7 # NV = 7.5 # PV = 0xaaaad35bf760 "7.5"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 1..1 } ok 5 - '[MAXINT]' { ok 1 - this becomes an integer after a numeric operation, even though the value is a UV (unsigned int), not an IV # SV = PVIV(0xaaaad29835f0) at 0xaaaad35ba850 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK,IsUV) # UV = 18446744073709551615 # PV = 0xaaaad3644bd0 "18446744073709551615"\0 # CUR = 20 # LEN = 22 # COW_REFCNT = 0 1..1 } 1..5 } ok 5 - int subsequently used as a float { ok 1 - after being treated as a float the variable still has its original value 7 ok 2 - 7 is still an integer after being numerically compared to a float 1..2 } ok 6 - are we checking the flags, not just the contents of the IV/NV slots? { ok 1 - variable containing 42 is an integer ok 2 - ... and so of course it's also a number ok 3 - variable is no longer an int after a string was assigned to it ok 4 - ... no longer a number either # still says 42 in the IV slot, but IOK isn't set # SV = PVIV(0xaaaad2983398) at 0xaaaad35bab50 # REFCNT = 2 # FLAGS = (POK,IsCOW,pPOK) # IV = 42 # PV = 0xaaaad35c7090 "forty two"\0 # CUR = 9 # LEN = 16 # COW_REFCNT = 1 ok 5 - variable containing 3.14 is not an integer ok 6 - ... but it is a number ok 7 - still not an integer after value changed to "delicious pie" ok 8 - ... no longer a number either 1..8 } ok 7 - references { ok 1 - \1 is not an integer ok 2 - \1 is of type REF_TO_SCALAR ok 3 - \"1" is of type REF_TO_SCALAR ok 4 - {} is of type REF_TO_HASH ok 5 - blessed scalars return their class 1..5 } ok 8 - type returns the documented values for non-reference types { ok 1 - 1 is of type INTEGER ok 2 - 1.0 is of type NUMBER ok 3 - 1.1 is of type NUMBER ok 4 - "1" is of type SCALAR ok 5 - "1.0" is of type SCALAR ok 6 - "1.1" is of type SCALAR ok 7 - undef is of type UNDEF 1..7 } ok 9 - type() requires an argument ok 10 - is_number() requires an argument ok 11 - is_integer() requires an argument 1..11 ok All tests successful. Files=6, Tests=25, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.47 cusr 0.10 csys = 0.61 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-type-perl/ make -j12 install DESTDIR=/build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Scalar/Type/Type.so Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type/Extras.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Compare/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Scalar/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type::Extras.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Compare::Type.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Scalar::Type.3pm make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-type-perl-dbgsym' in '../libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb'. dpkg-deb: building package 'libscalar-type-perl' in '../libscalar-type-perl_1.0.1-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libscalar-type-perl_1.0.1-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libscalar-type-perl_1.0.1-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3498572 and its subdirectories I: Current time: Fri Oct 31 04:00:42 -12 2025 I: pbuilder-time-stamp: 1761926442 Fri Oct 31 16:00:42 UTC 2025 I: Signing ./b1/libscalar-type-perl_1.0.1-1_arm64.buildinfo as libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc Fri Oct 31 16:00:42 UTC 2025 I: Signed ./b1/libscalar-type-perl_1.0.1-1_arm64.buildinfo as ./b1/libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc Fri Oct 31 16:00:42 UTC 2025 - build #1 for libscalar-type-perl/unstable/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Fri Oct 31 16:00:42 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-UoUbMiIA, removing. /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 16:00 b1 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 16:00 b2 -rw-rw-r-- 1 jenkins jenkins 2511 May 8 2024 libscalar-type-perl_1.0.1-1.dsc -rw------- 1 jenkins jenkins 3707 Oct 31 16:00 rbuildlog.gVpMG9z /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1: total 144 -rw-r--r-- 1 jenkins jenkins 35143 Oct 31 16:00 build.log -rw-r--r-- 1 jenkins jenkins 24420 Oct 31 16:00 libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 2000 Oct 31 16:00 libscalar-type-perl_1.0.1-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2511 Oct 31 16:00 libscalar-type-perl_1.0.1-1.dsc -rw-r--r-- 1 jenkins jenkins 4946 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5828 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1625 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 25200 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1751 Oct 31 16:00 libscalar-type-perl_1.0.1-1_source.changes -rw-r--r-- 1 jenkins jenkins 24570 Oct 31 16:00 libscalar-type-perl_1.0.1.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2: total 0 Fri Oct 31 16:00:43 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 04:00:22 -12 2025 I: pbuilder-time-stamp: 1761926422 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libscalar-type-perl_1.0.1-1.dsc] I: copying [./libscalar-type-perl_1.0.1.orig.tar.gz] I: copying [./libscalar-type-perl_1.0.1-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libscalar-type-perl_1.0.1-1.dsc: no acceptable signature found dpkg-source: info: extracting libscalar-type-perl in libscalar-type-perl-1.0.1 dpkg-source: info: unpacking libscalar-type-perl_1.0.1.orig.tar.gz dpkg-source: info: unpacking libscalar-type-perl_1.0.1-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3498572/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='ba4843b62a7a4b9ab24674df150d9353' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3498572' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_TUSa --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1 --logfile b1/build.log libscalar-type-perl_1.0.1-1.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3498572/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcapture-tiny-perl, libscalar-list-utils-perl, libtest-simple-perl, libtest2-suite-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19964 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcapture-tiny-perl; however: Package libcapture-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest2-suite-perl; however: Package libtest2-suite-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtest-simple-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 12.8 MB of archives. After unpacking 52.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.194-1 [184 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2-16 arm64 2.15.1+dfsg-0.3 [591 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libcapture-tiny-perl all 0.50-1 [24.6 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 libtest-simple-perl all 1.302214-1 [734 kB] Fetched 12.8 MB in 0s (158 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19964 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.194-1_arm64.deb ... Unpacking libelf1t64:arm64 (0.194-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.15.1+dfsg-0.3_arm64.deb ... Unpacking libxml2-16:arm64 (2.15.1+dfsg-0.3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../29-libcapture-tiny-perl_0.50-1_all.deb ... Unpacking libcapture-tiny-perl (0.50-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../30-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libtest-simple-perl. Preparing to unpack .../31-libtest-simple-perl_1.302214-1_all.deb ... Unpacking libtest-simple-perl (1.302214-1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.15.1+dfsg-0.3) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.194-1) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up libcapture-tiny-perl (0.50-1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libtest-simple-perl (1.302214-1) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libscalar-type-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libscalar-type-perl_1.0.1-1_source.changes dpkg-buildpackage: info: source package libscalar-type-perl dpkg-buildpackage: info: source version 1.0.1-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scalar::Type Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' Running Mkbootstrap for Type () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Type.xs > Type.xsc chmod 644 "Type.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 cp lib/Test2/Compare/Type.pm blib/lib/Test2/Compare/Type.pm cp lib/Test2/Tools/Type.pm blib/lib/Test2/Tools/Type.pm cp lib/Test2/Tools/Type/Extras.pm blib/lib/Test2/Tools/Type/Extras.pm cp lib/Scalar/Type.pm blib/lib/Scalar/Type.pm mv Type.xsc Type.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Type.c rm -f blib/arch/auto/Scalar/Type/Type.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Type.o -o blib/arch/auto/Scalar/Type/Type.so \ \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Scalar/Type/Type.so Manifying 4 pod documents make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bool.t .............. # Seeded srand with seed '20251031' from local date. ok 1 - type(1 == 1) is BOOL ok 2 - type(1 == 0) is BOOL ok 3 - is_bool says yes for (1 == 1) ok 4 - is_bool says yes for (1 == 0) ok 5 - but it says no for plain old 1 (otherwise indistinguishable from (1 == 1)) ok 6 - and it says no for plain old '' (otherwise indistinguishable from (1 == 0)) 1..6 ok t/pod-coverage.t ...... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.t ............... skipped: Test::Pod 1.18 required for testing POD t/sizeof.t ............ # Seeded srand with seed '20251031' from local date. ok 1 - sizeof(integer) { ok 1 - sizeof(int) is correct 1..1 } ok 2 - sizeof(number) { ok 1 - sizeof(float) is correct 1..1 } ok 3 - sizeof(whatever) { ok 1 - sizeof() requires an argument ok 2 - sizeof()'s arg must be plausibly numeric 1..2 } 1..3 ok t/test2-tools-type.t .. # Seeded srand with seed '20251031' from local date. ok 1 - extra functions aren't available unless asked for ok 2 - show supported types { ok 1 - default types ok 2 - default types doesn't include the extras ok 3 - :extras makes extras visible 1..3 } ok 3 - is_* tests { ok 1 - test names emitted correctly when supplied ok 2 - no name supplied? no name emitted ok 3 - is_integer(1) Pass ok 4 - is_integer(1.2) Fail ok 5 - is_integer("1") Fail ok 6 - is_number(1) Pass ok 7 - is_number(1.2) Pass ok 8 - is_number("1") Fail ok 9 - is_positive(1.2) Pass ok 10 - is_positive(-1.2) Fail ok 11 - is_negative(-1.2) Pass ok 12 - is_negative(1.2) Fail ok 13 - is_positive("1.2") Pass ok 14 - is_negative("-1.2") Pass ok 15 - is_ref(1) Fail ok 16 - is_ref(\1) Pass ok 17 - is_object(1) Fail ok 18 - is_object(bless {}) Pass ok 19 - is_hashref([]) Fail ok 20 - is_hashref({}) Pass ok 21 - is_arrayref({}) Fail ok 22 - is_arrayref([]) Pass ok 23 - is_scalarref(sub {}) Fail ok 24 - is_scalarref(\"") Pass ok 25 - is_coderef(\"" Fail ok 26 - is_coderef(sub {}) Pass ok 27 - is_globref(*is_integer) Fail ok 28 - is_globref(\*is_integer) Pass ok 29 - is_refref(\1) Fail ok 30 - is_refref(\\1) Pass ok 31 - is_regex(1) Fail ok 32 - is_regex(qr/abc/) Pass ok 33 - is_bool(1==1) Pass ok 34 - is_bool(1==2) Pass ok 35 - is_bool(1) Fail ok 36 - is_integer(1==1) Fail ok 37 - is_number(1==1) Fail ok 38 - is_integer(1==2) Fail ok 39 - is_number(1==2) Fail ok 40 - regex_supported on your perl ok 41 - bool_supported on your perl 1..41 } ok 4 - type() tests { ok 1 - failed test, op and name emitted in diagnostics are correct ok 2 - failed negated test, op emitted in diagnostics is correct ok 3 - failed test, op and multi-name emitted in diagnostics are correct ok 4 - failed test, op and name with 'has value' emitted in diagnostics are correct ok 5 - failed test, op and name with another checker emitted in diagnostics are correct ok 6 - is(1, type('integer')) Ok ok 7 - is(1.2, type('integer')) Fail ok 8 - is(1, !type('integer')) Fail ok 9 - is(1.2, !type('integer')) Ok ok 10 - is(1.2, type('number')) Ok ok 11 - is('1.2', !type('positive', 'number')) Ok ok 12 - is('1.2', type('positive', 'number')) Fail ok 13 - is(1.2, type('positive', 'number')) Ok ok 14 - is(-1.2, type('positive', 'number')) Fail ok 15 - is(-1.2, type('negative', 'number')) Ok ok 16 - is(-1.2, type('negative', 'integer')) Fail ok 17 - is(-1.2, type('number', -1.1)) Fail ok 18 - is(-1.2, type('number', -1.2)) Ok ok 19 - is(4, type(integer => in_set(1, 5, 8))) Fail ok 20 - is(4, type(integer => in_set(1, 4, 8))) Ok ok 21 - is({ ... }, type(hashref => { same })) Ok ok 22 - is({ ... }, type(hashref => { not the same })) Fail ok 23 - is(bless({ ... }), type(!type('object'), hashref => { same })) Fail ok 24 - is(1==1, type('bool')) Ok ok 25 - is(1==2, type('bool')) Ok ok 26 - is(1.2, type('bool')) Fail ok 27 - argument is mandatory ok 28 - exception: 'mammal' isn't a valid argument to type() ok 29 - exception: random data isn't a valid argument either 1..29 } ok 5 - checks don't mess with types { ok 1 - starting with an int ok 2 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally un-intify an int ok 3 - starting with a float ok 4 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally intify a float ok 5 - starting with a string ok 6 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally numify a string 1..6 } 1..5 ok t/types.t ............. # Seeded srand with seed '20251031' from local date. ok 1 - is_integer { ok 1 - 0 is an integer ok 2 - -0 is an integer ok 3 - 1 is an integer ok 4 - -1 is an integer ok 5 - "1" is not an integer ok 6 - 1.0 is not an integer ok 7 - 1.1 is not an integer ok 8 - 0.0 is not an integer ok 9 - 0x12 is an integer ok 10 - "0x12" is not an integer ok 11 - "1" + 0 gets its IV slot filled, is an integer ok 12 - after undef-ing, it's no longer an integer 1..12 } ok 2 - is_number { ok 1 - 1 is a number ok 2 - 1.0 is a number ok 3 - 1.1 is a number ok 4 - 0.0 is a number ok 5 - "1" is not a number ok 6 - "1.0" is not a number ok 7 - "0x12" is not a number ok 8 - 0x12 is a number ok 9 - "12.10" is not a number ok 10 - "12.10" is still not a number after being used in a numeric context # SV = PVNV(0xaaaad3548f30) at 0xaaaad34c05d8 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 12 # NV = 12.1 # PV = 0xaaaad32ebd40 "12.10"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 1..10 } ok 3 - integers written as exponents are weird { ok 1 - 32 bit-friendly exp ints { ok 1 - 1e2 is not an integer (but it oughta be!) ok 2 - ... but it is a number ok 3 - -1e2 is not an integer (but it oughta be!) ok 4 - ... but it is a number ok 5 - 1e2 + 0 is an integer ok 6 - 0 + 1e2 is an integer ok 7 - -1e2 + 0 is an integer 1..7 } ok 2 - 32 bit-unfriendly, 64 bit-friendly exp ints { ok 1 - 1e10 is not an integer (but it oughta be on 64 bit machines!) ok 2 - ... but it is a number ok 3 - -1e10 is not an integer (but it oughta be on 64 bit machines!) ok 4 - ... but it is a number ok 5 - 1e10 + 0 is an integer ok 6 - 0 + 1e10 is an integer ok 7 - -1e10 + 0 is an integer 1..7 } ok 3 - 64 bit-unfriendly exp ints { ok 1 - 1e20 is not an integer ok 2 - ... but it is a number ok 3 - -1e20 is not an integer ok 4 - ... but it is a number ok 5 - 1e20 + 0 is not an integer ok 6 - ... but it is a number ok 7 - 0 + 1e20 is not an integer ok 8 - ... but it is a number ok 9 - -1e20 + 0 is not an integer ok 10 - ... but it is a number 1..10 } 1..3 } ok 4 - string subsequently used as an int or float { ok 1 - '007' { ok 1 - after being treated as an int it still has its original value ok 2 - and it's not become an integer as far as we're concerned # SV = PVIV(0xaaaad2983398) at 0xaaaad35ba0e8 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 # PV = 0xaaaad35b2850 "007"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 1..2 } ok 2 - '007.5' { ok 1 - after being treated as a float it still has its original value ok 2 - and it's not become a float as far as we're concerned # SV = PVNV(0xaaaad3548d50) at 0xaaaad35ba2e0 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pNOK,pPOK) # IV = 0 # NV = 7.5 # PV = 0xaaaad35bc330 "007.5"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 1..2 } ok 3 - '7' { ok 1 - this does become an int after a numeric operation # SV = PVIV(0xaaaad2983638) at 0xaaaad35ba4f0 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 # PV = 0xaaaad35be2d0 "7"\0 # CUR = 1 # LEN = 16 # COW_REFCNT = 1 1..1 } ok 4 - '7.5' { ok 1 - this does become a float after a numeric operation # SV = PVNV(0xaaaad3548eb0) at 0xaaaad35ba6a0 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 7 # NV = 7.5 # PV = 0xaaaad35bf760 "7.5"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 1..1 } ok 5 - '[MAXINT]' { ok 1 - this becomes an integer after a numeric operation, even though the value is a UV (unsigned int), not an IV # SV = PVIV(0xaaaad29835f0) at 0xaaaad35ba850 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK,IsUV) # UV = 18446744073709551615 # PV = 0xaaaad3644bd0 "18446744073709551615"\0 # CUR = 20 # LEN = 22 # COW_REFCNT = 0 1..1 } 1..5 } ok 5 - int subsequently used as a float { ok 1 - after being treated as a float the variable still has its original value 7 ok 2 - 7 is still an integer after being numerically compared to a float 1..2 } ok 6 - are we checking the flags, not just the contents of the IV/NV slots? { ok 1 - variable containing 42 is an integer ok 2 - ... and so of course it's also a number ok 3 - variable is no longer an int after a string was assigned to it ok 4 - ... no longer a number either # still says 42 in the IV slot, but IOK isn't set # SV = PVIV(0xaaaad2983398) at 0xaaaad35bab50 # REFCNT = 2 # FLAGS = (POK,IsCOW,pPOK) # IV = 42 # PV = 0xaaaad35c7090 "forty two"\0 # CUR = 9 # LEN = 16 # COW_REFCNT = 1 ok 5 - variable containing 3.14 is not an integer ok 6 - ... but it is a number ok 7 - still not an integer after value changed to "delicious pie" ok 8 - ... no longer a number either 1..8 } ok 7 - references { ok 1 - \1 is not an integer ok 2 - \1 is of type REF_TO_SCALAR ok 3 - \"1" is of type REF_TO_SCALAR ok 4 - {} is of type REF_TO_HASH ok 5 - blessed scalars return their class 1..5 } ok 8 - type returns the documented values for non-reference types { ok 1 - 1 is of type INTEGER ok 2 - 1.0 is of type NUMBER ok 3 - 1.1 is of type NUMBER ok 4 - "1" is of type SCALAR ok 5 - "1.0" is of type SCALAR ok 6 - "1.1" is of type SCALAR ok 7 - undef is of type UNDEF 1..7 } ok 9 - type() requires an argument ok 10 - is_number() requires an argument ok 11 - is_integer() requires an argument 1..11 ok All tests successful. Files=6, Tests=25, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.47 cusr 0.10 csys = 0.61 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-type-perl/ make -j12 install DESTDIR=/build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Scalar/Type/Type.so Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type/Extras.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Compare/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Scalar/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type::Extras.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Compare::Type.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Scalar::Type.3pm make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-type-perl-dbgsym' in '../libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb'. dpkg-deb: building package 'libscalar-type-perl' in '../libscalar-type-perl_1.0.1-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libscalar-type-perl_1.0.1-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libscalar-type-perl_1.0.1-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3498572 and its subdirectories I: Current time: Fri Oct 31 04:00:42 -12 2025 I: pbuilder-time-stamp: 1761926442 Fri Oct 31 16:00:43 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Oct 31 16:00:43 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Oct 31 16:00:43 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Oct 31 16:00:43 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-PNqAuD' ==================================================================================== Thu Dec 3 22:23:44 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libscalar-type-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM 1.0.1-1" as arguments. Thu Dec 3 22:23:44 UTC 2026 - actually running "reproducible_build.sh" (md5sum cc591790ab2c8e13f5e554202b95c89c) as "/tmp/jenkins-script-nPmMu7oI" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Dec 3 22:23:44 UTC 2026 I: Downloading source for unstable/libscalar-type-perl=1.0.1-1 Reading package lists... NOTICE: 'libscalar-type-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 29.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (dsc) [2511 B] Get:2 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (tar) [24.6 kB] Get:3 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (diff) [2000 B] Fetched 29.1 kB in 0s (1619 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libscalar-type-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-type-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 29.1 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (dsc) [2511 B] Get:2 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (tar) [24.6 kB] Get:3 http://deb.debian.org/debian unstable/main libscalar-type-perl 1.0.1-1 (diff) [2000 B] Fetched 29.1 kB in 0s (1619 kB/s) Download complete and in download only mode ============================================================================= Re-Building libscalar-type-perl in unstable on arm64 on codethink03-arm64 now. Date: Thu Dec 3 22:23:44 GMT 2026 Date UTC: Thu Dec 3 22:23:44 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_UE2h + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libscalar-type-perl = debian-installer -o libscalar-type-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libscalar-type-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_UE2h --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2 --logfile b2/build.log libscalar-type-perl_1.0.1-1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Dec 4 12:23:44 +14 2026 I: pbuilder-time-stamp: 1796336624 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libscalar-type-perl_1.0.1-1.dsc] I: copying [./libscalar-type-perl_1.0.1.orig.tar.gz] I: copying [./libscalar-type-perl_1.0.1-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libscalar-type-perl_1.0.1-1.dsc: no acceptable signature found dpkg-source: info: extracting libscalar-type-perl in libscalar-type-perl-1.0.1 dpkg-source: info: unpacking libscalar-type-perl_1.0.1.orig.tar.gz dpkg-source: info: unpacking libscalar-type-perl_1.0.1-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 3 22:23 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=d40a0a2c66d54f01a32d176f93471447 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2993182 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_UE2h --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2 --logfile b2/build.log libscalar-type-perl_1.0.1-1.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcapture-tiny-perl, libscalar-list-utils-perl, libtest-simple-perl, libtest2-suite-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19964 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcapture-tiny-perl; however: Package libcapture-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest2-suite-perl; however: Package libtest2-suite-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcapture-tiny-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtest-simple-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 12.8 MB of archives. After unpacking 52.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian unstable/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian unstable/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian unstable/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian unstable/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian unstable/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian unstable/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian unstable/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian unstable/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian unstable/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian unstable/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian unstable/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian unstable/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian unstable/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian unstable/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian unstable/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian unstable/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian unstable/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian unstable/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian unstable/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian unstable/main arm64 libelf1t64 arm64 0.194-1 [184 kB] Get: 23 http://deb.debian.org/debian unstable/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian unstable/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian unstable/main arm64 libxml2-16 arm64 2.15.1+dfsg-0.3 [591 kB] Get: 26 http://deb.debian.org/debian unstable/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian unstable/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian unstable/main arm64 libcapture-tiny-perl all 0.50-1 [24.6 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 libtest-simple-perl all 1.302214-1 [734 kB] Fetched 12.8 MB in 0s (85.6 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19964 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.194-1_arm64.deb ... Unpacking libelf1t64:arm64 (0.194-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.15.1+dfsg-0.3_arm64.deb ... Unpacking libxml2-16:arm64 (2.15.1+dfsg-0.3) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../29-libcapture-tiny-perl_0.50-1_all.deb ... Unpacking libcapture-tiny-perl (0.50-1) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../30-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libtest-simple-perl. Preparing to unpack .../31-libtest-simple-perl_1.302214-1_all.deb ... Unpacking libtest-simple-perl (1.302214-1) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.15.1+dfsg-0.3) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.194-1) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up libcapture-tiny-perl (0.50-1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libtest-simple-perl (1.302214-1) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libscalar-type-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libscalar-type-perl_1.0.1-1_source.changes dpkg-buildpackage: info: source package libscalar-type-perl dpkg-buildpackage: info: source version 1.0.1-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scalar::Type Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Type.xs > Type.xsc Running Mkbootstrap for Type () chmod 644 "Type.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 cp lib/Test2/Tools/Type/Extras.pm blib/lib/Test2/Tools/Type/Extras.pm cp lib/Scalar/Type.pm blib/lib/Scalar/Type.pm cp lib/Test2/Tools/Type.pm blib/lib/Test2/Tools/Type.pm cp lib/Test2/Compare/Type.pm blib/lib/Test2/Compare/Type.pm mv Type.xsc Type.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Type.c rm -f blib/arch/auto/Scalar/Type/Type.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Type.o -o blib/arch/auto/Scalar/Type/Type.so \ \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Scalar/Type/Type.so Manifying 4 pod documents make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bool.t .............. # Seeded srand with seed '20261203' from local date. ok 1 - type(1 == 1) is BOOL ok 2 - type(1 == 0) is BOOL ok 3 - is_bool says yes for (1 == 1) ok 4 - is_bool says yes for (1 == 0) ok 5 - but it says no for plain old 1 (otherwise indistinguishable from (1 == 1)) ok 6 - and it says no for plain old '' (otherwise indistinguishable from (1 == 0)) 1..6 ok t/pod-coverage.t ...... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.t ............... skipped: Test::Pod 1.18 required for testing POD t/sizeof.t ............ # Seeded srand with seed '20261203' from local date. ok 1 - sizeof(integer) { ok 1 - sizeof(int) is correct 1..1 } ok 2 - sizeof(number) { ok 1 - sizeof(float) is correct 1..1 } ok 3 - sizeof(whatever) { ok 1 - sizeof() requires an argument ok 2 - sizeof()'s arg must be plausibly numeric 1..2 } 1..3 ok t/test2-tools-type.t .. # Seeded srand with seed '20261203' from local date. ok 1 - extra functions aren't available unless asked for ok 2 - show supported types { ok 1 - default types ok 2 - default types doesn't include the extras ok 3 - :extras makes extras visible 1..3 } ok 3 - is_* tests { ok 1 - test names emitted correctly when supplied ok 2 - no name supplied? no name emitted ok 3 - is_integer(1) Pass ok 4 - is_integer(1.2) Fail ok 5 - is_integer("1") Fail ok 6 - is_number(1) Pass ok 7 - is_number(1.2) Pass ok 8 - is_number("1") Fail ok 9 - is_positive(1.2) Pass ok 10 - is_positive(-1.2) Fail ok 11 - is_negative(-1.2) Pass ok 12 - is_negative(1.2) Fail ok 13 - is_positive("1.2") Pass ok 14 - is_negative("-1.2") Pass ok 15 - is_ref(1) Fail ok 16 - is_ref(\1) Pass ok 17 - is_object(1) Fail ok 18 - is_object(bless {}) Pass ok 19 - is_hashref([]) Fail ok 20 - is_hashref({}) Pass ok 21 - is_arrayref({}) Fail ok 22 - is_arrayref([]) Pass ok 23 - is_scalarref(sub {}) Fail ok 24 - is_scalarref(\"") Pass ok 25 - is_coderef(\"" Fail ok 26 - is_coderef(sub {}) Pass ok 27 - is_globref(*is_integer) Fail ok 28 - is_globref(\*is_integer) Pass ok 29 - is_refref(\1) Fail ok 30 - is_refref(\\1) Pass ok 31 - is_regex(1) Fail ok 32 - is_regex(qr/abc/) Pass ok 33 - is_bool(1==1) Pass ok 34 - is_bool(1==2) Pass ok 35 - is_bool(1) Fail ok 36 - is_integer(1==1) Fail ok 37 - is_number(1==1) Fail ok 38 - is_integer(1==2) Fail ok 39 - is_number(1==2) Fail ok 40 - regex_supported on your perl ok 41 - bool_supported on your perl 1..41 } ok 4 - type() tests { ok 1 - failed test, op and name emitted in diagnostics are correct ok 2 - failed negated test, op emitted in diagnostics is correct ok 3 - failed test, op and multi-name emitted in diagnostics are correct ok 4 - failed test, op and name with 'has value' emitted in diagnostics are correct ok 5 - failed test, op and name with another checker emitted in diagnostics are correct ok 6 - is(1, type('integer')) Ok ok 7 - is(1.2, type('integer')) Fail ok 8 - is(1, !type('integer')) Fail ok 9 - is(1.2, !type('integer')) Ok ok 10 - is(1.2, type('number')) Ok ok 11 - is('1.2', !type('positive', 'number')) Ok ok 12 - is('1.2', type('positive', 'number')) Fail ok 13 - is(1.2, type('positive', 'number')) Ok ok 14 - is(-1.2, type('positive', 'number')) Fail ok 15 - is(-1.2, type('negative', 'number')) Ok ok 16 - is(-1.2, type('negative', 'integer')) Fail ok 17 - is(-1.2, type('number', -1.1)) Fail ok 18 - is(-1.2, type('number', -1.2)) Ok ok 19 - is(4, type(integer => in_set(1, 5, 8))) Fail ok 20 - is(4, type(integer => in_set(1, 4, 8))) Ok ok 21 - is({ ... }, type(hashref => { same })) Ok ok 22 - is({ ... }, type(hashref => { not the same })) Fail ok 23 - is(bless({ ... }), type(!type('object'), hashref => { same })) Fail ok 24 - is(1==1, type('bool')) Ok ok 25 - is(1==2, type('bool')) Ok ok 26 - is(1.2, type('bool')) Fail ok 27 - argument is mandatory ok 28 - exception: 'mammal' isn't a valid argument to type() ok 29 - exception: random data isn't a valid argument either 1..29 } ok 5 - checks don't mess with types { ok 1 - starting with an int ok 2 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally un-intify an int ok 3 - starting with a float ok 4 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally intify a float ok 5 - starting with a string ok 6 - is_{positive,negative,zero} and ref/reftype/blessed don't accidentally numify a string 1..6 } 1..5 ok t/types.t ............. # Seeded srand with seed '20261203' from local date. ok 1 - is_integer { ok 1 - 0 is an integer ok 2 - -0 is an integer ok 3 - 1 is an integer ok 4 - -1 is an integer ok 5 - "1" is not an integer ok 6 - 1.0 is not an integer ok 7 - 1.1 is not an integer ok 8 - 0.0 is not an integer ok 9 - 0x12 is an integer ok 10 - "0x12" is not an integer ok 11 - "1" + 0 gets its IV slot filled, is an integer ok 12 - after undef-ing, it's no longer an integer 1..12 } ok 2 - is_number { ok 1 - 1 is a number ok 2 - 1.0 is a number ok 3 - 1.1 is a number ok 4 - 0.0 is a number ok 5 - "1" is not a number ok 6 - "1.0" is not a number ok 7 - "0x12" is not a number ok 8 - 0x12 is a number ok 9 - "12.10" is not a number ok 10 - "12.10" is still not a number after being used in a numeric context # SV = PVNV(0xaaaad56cb500) at 0xaaaad5643388 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 12 # NV = 12.1 # PV = 0xaaaad571b910 "12.10"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 1..10 } ok 3 - integers written as exponents are weird { ok 1 - 32 bit-friendly exp ints { ok 1 - 1e2 is not an integer (but it oughta be!) ok 2 - ... but it is a number ok 3 - -1e2 is not an integer (but it oughta be!) ok 4 - ... but it is a number ok 5 - 1e2 + 0 is an integer ok 6 - 0 + 1e2 is an integer ok 7 - -1e2 + 0 is an integer 1..7 } ok 2 - 32 bit-unfriendly, 64 bit-friendly exp ints { ok 1 - 1e10 is not an integer (but it oughta be on 64 bit machines!) ok 2 - ... but it is a number ok 3 - -1e10 is not an integer (but it oughta be on 64 bit machines!) ok 4 - ... but it is a number ok 5 - 1e10 + 0 is an integer ok 6 - 0 + 1e10 is an integer ok 7 - -1e10 + 0 is an integer 1..7 } ok 3 - 64 bit-unfriendly exp ints { ok 1 - 1e20 is not an integer ok 2 - ... but it is a number ok 3 - -1e20 is not an integer ok 4 - ... but it is a number ok 5 - 1e20 + 0 is not an integer ok 6 - ... but it is a number ok 7 - 0 + 1e20 is not an integer ok 8 - ... but it is a number ok 9 - -1e20 + 0 is not an integer ok 10 - ... but it is a number 1..10 } 1..3 } ok 4 - string subsequently used as an int or float { ok 1 - '007' { ok 1 - after being treated as an int it still has its original value ok 2 - and it's not become an integer as far as we're concerned # SV = PVIV(0xaaaad4b04418) at 0xaaaad573cd18 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 # PV = 0xaaaad5738bf0 "007"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 1..2 } ok 2 - '007.5' { ok 1 - after being treated as a float it still has its original value ok 2 - and it's not become a float as far as we're concerned # SV = PVNV(0xaaaad56cb360) at 0xaaaad573cf10 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pNOK,pPOK) # IV = 0 # NV = 7.5 # PV = 0xaaaad573efd0 "007.5"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 1..2 } ok 3 - '7' { ok 1 - this does become an int after a numeric operation # SV = PVIV(0xaaaad4b04628) at 0xaaaad573d120 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 # PV = 0xaaaad5741030 "7"\0 # CUR = 1 # LEN = 16 # COW_REFCNT = 1 1..1 } ok 4 - '7.5' { ok 1 - this does become a float after a numeric operation # SV = PVNV(0xaaaad56cb5c0) at 0xaaaad573d2d0 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 7 # NV = 7.5 # PV = 0xaaaad57424c0 "7.5"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 1..1 } ok 5 - '[MAXINT]' { ok 1 - this becomes an integer after a numeric operation, even though the value is a UV (unsigned int), not an IV # SV = PVIV(0xaaaad4b04400) at 0xaaaad573d480 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK,IsUV) # UV = 18446744073709551615 # PV = 0xaaaad57d42a0 "18446744073709551615"\0 # CUR = 20 # LEN = 22 # COW_REFCNT = 0 1..1 } 1..5 } ok 5 - int subsequently used as a float { ok 1 - after being treated as a float the variable still has its original value 7 ok 2 - 7 is still an integer after being numerically compared to a float 1..2 } ok 6 - are we checking the flags, not just the contents of the IV/NV slots? { ok 1 - variable containing 42 is an integer ok 2 - ... and so of course it's also a number ok 3 - variable is no longer an int after a string was assigned to it ok 4 - ... no longer a number either # still says 42 in the IV slot, but IOK isn't set # SV = PVIV(0xaaaad4b04478) at 0xaaaad573d780 # REFCNT = 2 # FLAGS = (POK,IsCOW,pPOK) # IV = 42 # PV = 0xaaaad5739e80 "forty two"\0 # CUR = 9 # LEN = 16 # COW_REFCNT = 1 ok 5 - variable containing 3.14 is not an integer ok 6 - ... but it is a number ok 7 - still not an integer after value changed to "delicious pie" ok 8 - ... no longer a number either 1..8 } ok 7 - references { ok 1 - \1 is not an integer ok 2 - \1 is of type REF_TO_SCALAR ok 3 - \"1" is of type REF_TO_SCALAR ok 4 - {} is of type REF_TO_HASH ok 5 - blessed scalars return their class 1..5 } ok 8 - type returns the documented values for non-reference types { ok 1 - 1 is of type INTEGER ok 2 - 1.0 is of type NUMBER ok 3 - 1.1 is of type NUMBER ok 4 - "1" is of type SCALAR ok 5 - "1.0" is of type SCALAR ok 6 - "1.1" is of type SCALAR ok 7 - undef is of type UNDEF 1..7 } ok 9 - type() requires an argument ok 10 - is_number() requires an argument ok 11 - is_integer() requires an argument 1..11 ok All tests successful. Files=6, Tests=25, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.63 cusr 0.10 csys = 0.79 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-type-perl/ make -j12 install DESTDIR=/build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Scalar/Type/Type.so Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Compare/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type/Extras.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Scalar/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type::Extras.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Compare::Type.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Scalar::Type.3pm make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-type-perl-dbgsym' in '../libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb'. dpkg-deb: building package 'libscalar-type-perl' in '../libscalar-type-perl_1.0.1-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libscalar-type-perl_1.0.1-1_arm64.buildinfo dpkg-genchanges --build=binary -O../libscalar-type-perl_1.0.1-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2993182 and its subdirectories I: Current time: Fri Dec 4 12:24:13 +14 2026 I: pbuilder-time-stamp: 1796336653 + false + set +x Thu Dec 3 22:24:13 UTC 2026 I: Signing ./b2/libscalar-type-perl_1.0.1-1_arm64.buildinfo as libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc Thu Dec 3 22:24:13 UTC 2026 I: Signed ./b2/libscalar-type-perl_1.0.1-1_arm64.buildinfo as ./b2/libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc Thu Dec 3 22:24:13 UTC 2026 - build #2 for libscalar-type-perl/unstable/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Thu Dec 3 22:24:13 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-nPmMu7oI, removing. /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM: total 52 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 16:00 b1 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 16:01 b2 -rw-rw-r-- 1 jenkins jenkins 2511 May 8 2024 libscalar-type-perl_1.0.1-1.dsc -rw------- 1 jenkins jenkins 39151 Oct 31 16:00 rbuildlog.gVpMG9z /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1: total 144 -rw-r--r-- 1 jenkins jenkins 35143 Oct 31 16:00 build.log -rw-r--r-- 1 jenkins jenkins 24420 Oct 31 16:00 libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 2000 Oct 31 16:00 libscalar-type-perl_1.0.1-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2511 Oct 31 16:00 libscalar-type-perl_1.0.1-1.dsc -rw-r--r-- 1 jenkins jenkins 4946 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5828 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1625 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 25200 Oct 31 16:00 libscalar-type-perl_1.0.1-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 1751 Oct 31 16:00 libscalar-type-perl_1.0.1-1_source.changes -rw-r--r-- 1 jenkins jenkins 24570 Oct 31 16:00 libscalar-type-perl_1.0.1.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2: total 148 -rw-rw-r-- 1 jenkins jenkins 37085 Oct 31 16:01 build.log -rw-r--r-- 1 jenkins jenkins 24420 Oct 31 16:01 libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb -rw-r--r-- 1 jenkins jenkins 2000 Oct 31 16:01 libscalar-type-perl_1.0.1-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2511 Oct 31 16:01 libscalar-type-perl_1.0.1-1.dsc -rw-rw-r-- 1 jenkins jenkins 4946 Oct 31 16:01 libscalar-type-perl_1.0.1-1_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5828 Oct 31 16:01 libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 1625 Oct 31 16:01 libscalar-type-perl_1.0.1-1_arm64.changes -rw-r--r-- 1 jenkins jenkins 25200 Oct 31 16:01 libscalar-type-perl_1.0.1-1_arm64.deb -rw-rw-r-- 1 jenkins jenkins 1751 Oct 31 16:01 libscalar-type-perl_1.0.1-1_source.changes -rw-r--r-- 1 jenkins jenkins 24570 Oct 31 16:01 libscalar-type-perl_1.0.1.orig.tar.gz Fri Oct 31 16:01:13 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Oct 31 16:01:14 UTC 2025 I: libscalar-type-perl_1.0.1-1_arm64.changes: Format: 1.8 Date: Thu, 09 May 2024 00:57:06 +0200 Source: libscalar-type-perl Binary: libscalar-type-perl libscalar-type-perl-dbgsym Architecture: arm64 Version: 1.0.1-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libscalar-type-perl - module to figure out type of a scalar Changes: libscalar-type-perl (1.0.1-1) unstable; urgency=medium . * Import upstream version 1.0.1. * Update build dependencies. * Update runtime dependencies. * Update years of upstream and packaging copyright. * Declare compliance with Debian Policy 4.7.0. Checksums-Sha1: fd87bf76fbb32d2589c7d3d04660f065dda4e6ec 24420 libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb 54569527ffa6ed526a96575796d74050d2b871b6 4946 libscalar-type-perl_1.0.1-1_arm64.buildinfo 6c26e41b9e541596735abd00d1469d93ee4cba4b 25200 libscalar-type-perl_1.0.1-1_arm64.deb Checksums-Sha256: dd3407de73affd892aad493bf8a8d94aa566de141235bcd63ecec2d825799277 24420 libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb 1b4bec93c2bbd01b6aafa2beabc597b6c1bdf65e73931caed1203b81284fc37c 4946 libscalar-type-perl_1.0.1-1_arm64.buildinfo 6c0b79c4bf887cb2680780d380274d213c4fc56a8bca13081ff6090562705591 25200 libscalar-type-perl_1.0.1-1_arm64.deb Files: 02191307178cc0c4204c3014c8b23380 24420 debug optional libscalar-type-perl-dbgsym_1.0.1-1_arm64.deb 4b55a1fddc91af3a96b8414129adcbd3 4946 perl optional libscalar-type-perl_1.0.1-1_arm64.buildinfo 051091102a7323fb6272d457a80357eb 25200 perl optional libscalar-type-perl_1.0.1-1_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libscalar-type-perl_1.0.1-1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libscalar-type-perl_1.0.1-1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libscalar-type-perl_1.0.1-1.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/libscalar-type-perl_1.0.1-1.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/arm64/libscalar-type-perl_1.0.1-1_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libscalar-type-perl_1.0.1-1.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-10-31 16:00:42.932279750 +0000 +++ b2/build.log 2025-10-31 16:01:13.880316429 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Fri Oct 31 04:00:22 -12 2025 -I: pbuilder-time-stamp: 1761926422 +I: Current time: Fri Dec 4 12:23:44 +14 2026 +I: pbuilder-time-stamp: 1796336624 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -22,53 +22,85 @@ dpkg-source: info: unpacking libscalar-type-perl_1.0.1-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3498572/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 3 22:23 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='arm64' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='ba4843b62a7a4b9ab24674df150d9353' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3498572' - PS1='# ' - PS2='> ' + INVOCATION_ID=d40a0a2c66d54f01a32d176f93471447 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=2993182 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_TUSa --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1 --logfile b1/build.log libscalar-type-perl_1.0.1-1.dsc' - SUDO_GID='109' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/pbuilderrc_UE2h --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2 --logfile b2/build.log libscalar-type-perl_1.0.1-1.dsc' + SUDO_GID=109 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3498572/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -143,7 +175,7 @@ Get: 30 http://deb.debian.org/debian unstable/main arm64 libcapture-tiny-perl all 0.50-1 [24.6 kB] Get: 31 http://deb.debian.org/debian unstable/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 32 http://deb.debian.org/debian unstable/main arm64 libtest-simple-perl all 1.302214-1 [734 kB] -Fetched 12.8 MB in 0s (158 MB/s) +Fetched 12.8 MB in 0s (85.6 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19964 files and directories currently installed.) @@ -286,7 +318,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libscalar-type-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libscalar-type-perl_1.0.1-1_source.changes +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libscalar-type-perl-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libscalar-type-perl_1.0.1-1_source.changes dpkg-buildpackage: info: source package libscalar-type-perl dpkg-buildpackage: info: source version 1.0.1-1 dpkg-buildpackage: info: source distribution unstable @@ -310,14 +346,14 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libscalar-type-perl-1.0.1' -Running Mkbootstrap for Type () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Type.xs > Type.xsc +Running Mkbootstrap for Type () chmod 644 "Type.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 -cp lib/Test2/Compare/Type.pm blib/lib/Test2/Compare/Type.pm -cp lib/Test2/Tools/Type.pm blib/lib/Test2/Tools/Type.pm cp lib/Test2/Tools/Type/Extras.pm blib/lib/Test2/Tools/Type/Extras.pm cp lib/Scalar/Type.pm blib/lib/Scalar/Type.pm +cp lib/Test2/Tools/Type.pm blib/lib/Test2/Tools/Type.pm +cp lib/Test2/Compare/Type.pm blib/lib/Test2/Compare/Type.pm mv Type.xsc Type.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-type-perl-1.0.1=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.0.1\" -DXS_VERSION=\"1.0.1\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" Type.c rm -f blib/arch/auto/Scalar/Type/Type.so @@ -335,7 +371,7 @@ "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Type.bs blib/arch/auto/Scalar/Type/Type.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/bool.t .............. -# Seeded srand with seed '20251031' from local date. +# Seeded srand with seed '20261203' from local date. ok 1 - type(1 == 1) is BOOL ok 2 - type(1 == 0) is BOOL ok 3 - is_bool says yes for (1 == 1) @@ -347,7 +383,7 @@ t/pod-coverage.t ...... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.t ............... skipped: Test::Pod 1.18 required for testing POD t/sizeof.t ............ -# Seeded srand with seed '20251031' from local date. +# Seeded srand with seed '20261203' from local date. ok 1 - sizeof(integer) { ok 1 - sizeof(int) is correct 1..1 @@ -364,7 +400,7 @@ 1..3 ok t/test2-tools-type.t .. -# Seeded srand with seed '20251031' from local date. +# Seeded srand with seed '20261203' from local date. ok 1 - extra functions aren't available unless asked for ok 2 - show supported types { ok 1 - default types @@ -460,7 +496,7 @@ 1..5 ok t/types.t ............. -# Seeded srand with seed '20251031' from local date. +# Seeded srand with seed '20261203' from local date. ok 1 - is_integer { ok 1 - 0 is an integer ok 2 - -0 is an integer @@ -487,12 +523,12 @@ ok 8 - 0x12 is a number ok 9 - "12.10" is not a number ok 10 - "12.10" is still not a number after being used in a numeric context - # SV = PVNV(0xaaaad3548f30) at 0xaaaad34c05d8 + # SV = PVNV(0xaaaad56cb500) at 0xaaaad5643388 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 12 # NV = 12.1 - # PV = 0xaaaad32ebd40 "12.10"\0 + # PV = 0xaaaad571b910 "12.10"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 @@ -538,11 +574,11 @@ ok 1 - '007' { ok 1 - after being treated as an int it still has its original value ok 2 - and it's not become an integer as far as we're concerned - # SV = PVIV(0xaaaad2983398) at 0xaaaad35ba0e8 + # SV = PVIV(0xaaaad4b04418) at 0xaaaad573cd18 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 - # PV = 0xaaaad35b2850 "007"\0 + # PV = 0xaaaad5738bf0 "007"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 @@ -551,12 +587,12 @@ ok 2 - '007.5' { ok 1 - after being treated as a float it still has its original value ok 2 - and it's not become a float as far as we're concerned - # SV = PVNV(0xaaaad3548d50) at 0xaaaad35ba2e0 + # SV = PVNV(0xaaaad56cb360) at 0xaaaad573cf10 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pNOK,pPOK) # IV = 0 # NV = 7.5 - # PV = 0xaaaad35bc330 "007.5"\0 + # PV = 0xaaaad573efd0 "007.5"\0 # CUR = 5 # LEN = 16 # COW_REFCNT = 1 @@ -564,11 +600,11 @@ } ok 3 - '7' { ok 1 - this does become an int after a numeric operation - # SV = PVIV(0xaaaad2983638) at 0xaaaad35ba4f0 + # SV = PVIV(0xaaaad4b04628) at 0xaaaad573d120 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK) # IV = 7 - # PV = 0xaaaad35be2d0 "7"\0 + # PV = 0xaaaad5741030 "7"\0 # CUR = 1 # LEN = 16 # COW_REFCNT = 1 @@ -576,12 +612,12 @@ } ok 4 - '7.5' { ok 1 - this does become a float after a numeric operation - # SV = PVNV(0xaaaad3548eb0) at 0xaaaad35ba6a0 + # SV = PVNV(0xaaaad56cb5c0) at 0xaaaad573d2d0 # REFCNT = 2 # FLAGS = (NOK,POK,IsCOW,pIOK,pNOK,pPOK) # IV = 7 # NV = 7.5 - # PV = 0xaaaad35bf760 "7.5"\0 + # PV = 0xaaaad57424c0 "7.5"\0 # CUR = 3 # LEN = 16 # COW_REFCNT = 1 @@ -589,11 +625,11 @@ } ok 5 - '[MAXINT]' { ok 1 - this becomes an integer after a numeric operation, even though the value is a UV (unsigned int), not an IV - # SV = PVIV(0xaaaad29835f0) at 0xaaaad35ba850 + # SV = PVIV(0xaaaad4b04400) at 0xaaaad573d480 # REFCNT = 2 # FLAGS = (IOK,POK,IsCOW,pIOK,pPOK,IsUV) # UV = 18446744073709551615 - # PV = 0xaaaad3644bd0 "18446744073709551615"\0 + # PV = 0xaaaad57d42a0 "18446744073709551615"\0 # CUR = 20 # LEN = 22 # COW_REFCNT = 0 @@ -612,11 +648,11 @@ ok 3 - variable is no longer an int after a string was assigned to it ok 4 - ... no longer a number either # still says 42 in the IV slot, but IOK isn't set - # SV = PVIV(0xaaaad2983398) at 0xaaaad35bab50 + # SV = PVIV(0xaaaad4b04478) at 0xaaaad573d780 # REFCNT = 2 # FLAGS = (POK,IsCOW,pPOK) # IV = 42 - # PV = 0xaaaad35c7090 "forty two"\0 + # PV = 0xaaaad5739e80 "forty two"\0 # CUR = 9 # LEN = 16 # COW_REFCNT = 1 @@ -650,7 +686,7 @@ 1..11 ok All tests successful. -Files=6, Tests=25, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.47 cusr 0.10 csys = 0.61 CPU) +Files=6, Tests=25, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.63 cusr 0.10 csys = 0.79 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-type-perl-1.0.1' create-stamp debian/debhelper-build-stamp @@ -662,9 +698,9 @@ Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Scalar/Type/Type.so +Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Compare/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Tools/Type/Extras.pm -Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Test2/Compare/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Scalar/Type.pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type::Extras.3pm Installing /build/reproducible-path/libscalar-type-perl-1.0.1/debian/libscalar-type-perl/usr/share/man/man3/Test2::Tools::Type.3pm @@ -697,12 +733,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/2993182/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3498572 and its subdirectories -I: Current time: Fri Oct 31 04:00:42 -12 2025 -I: pbuilder-time-stamp: 1761926442 +I: removing directory /srv/workspace/pbuilder/2993182 and its subdirectories +I: Current time: Fri Dec 4 12:24:13 +14 2026 +I: pbuilder-time-stamp: 1796336653 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libscalar-type-perl_1.0.1-1.diff: 70.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/libscalar-type-perl_1.0.1-1.diff.gz b2/build.log: 74.9% -- replaced with stdout Compressing the 1st log... b1/build.log: 75.4% -- replaced with stdout Fri Oct 31 16:01:15 UTC 2025 I: diffoscope 306 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libscalar-type-perl_unstable_arm64_1761926475 + touch /var/log/reproducible-builds/diffoscope_stamp_libscalar-type-perl_unstable_arm64_1761926475 + RESULT=0 + systemd-run '--description=diffoscope on libscalar-type-perl/1.0.1-1 in unstable/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_8-94562 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM --run-session -c jenkins-reproducible-unstable-diffoscope-40d439cb-6abc-4548-85a3-e6751dd90a61 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/dbd-tmp-9jBBiPU ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/libscalar-type-perl_1.0.1-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/libscalar-type-perl_1.0.1-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/libscalar-type-perl_1.0.1-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1/libscalar-type-perl_1.0.1-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2/libscalar-type-perl_1.0.1-1_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_8-94562.service; invocation ID: 8f5d68bffc384680a00d3f3dad9a7281 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/libscalar-type-perl_1.0.1-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/libscalar-type-perl_1.0.1-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/libscalar-type-perl_1.0.1-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b1/libscalar-type-perl_1.0.1-1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.S1wZuNcM/b2/libscalar-type-perl_1.0.1-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 229ms CPU time consumed: 180ms Memory peak: 18.2M (swap: 0B) _ _ _ _ _ | (_) |__ ___ ___ __ _| | __ _ _ __ | |_ _ _ _ __ ___ _ __ | | | '_ \/ __|/ __/ _` | |/ _` | '__|____| __| | | | '_ \ / _ \_____| '_ \ | | | |_) \__ \ (_| (_| | | (_| | | |_____| |_| |_| | |_) | __/_____| |_) | |_|_|_.__/|___/\___\__,_|_|\__,_|_| \__|\__, | .__/ \___| | .__/ |___/|_| |_| _ ___ _ __| | / _ \ '__| | | __/ | | | \___|_| |_| Fri Oct 31 16:01:15 UTC 2025 I: diffoscope 306 found no differences in the changes files, and a .buildinfo file also exists. Fri Oct 31 16:01:15 UTC 2025 I: libscalar-type-perl from unstable built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-10-31 16:01:16] INFO: Starting at 2025-10-31 16:01:16.053172 [2025-10-31 16:01:16] INFO: Generating the pages of 1 package(s) [2025-10-31 16:01:16] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/arm64/libscalar-type-perl didn't produce a buildlog, even though it has been built. [2025-10-31 16:01:16] INFO: Finished at 2025-10-31 16:01:16.227976, took: 0:00:00.174808 Fri Oct 31 16:01:16 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/arm64/libscalar-type-perl.html Fri Oct 31 16:01:16 UTC 2025 I: Removing signed libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc files: removed './b1/libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc' removed './b2/libscalar-type-perl_1.0.1-1_arm64.buildinfo.asc' 1761926476 arm64 unstable libscalar-type-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libscalar-type-perl_1.0.1-1.rbuild.log: 72.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/arm64/libscalar-type-perl_1.0.1-1.rbuild.log.gz [2025-10-31 16:01:16] INFO: Starting at 2025-10-31 16:01:16.567279 [2025-10-31 16:01:16] INFO: Generating the pages of 1 package(s) [2025-10-31 16:01:16] INFO: Finished at 2025-10-31 16:01:16.749016, took: 0:00:00.181743 All cleanup done. Fri Oct 31 16:01:16 UTC 2025 - total duration: 0h 0m 57s. Fri Oct 31 16:01:16 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-lVblDXvR, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 58.975s CPU time consumed: 3.052s Memory peak: 35.7M (swap: 0B)