Running as unit: rb-build-arm64_8-94647.service; invocation ID: bf6e3fba16d74e53a89a3878868088e7 ==================================================================================== Fri Oct 31 21:24:57 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_arm64_8) on jenkins, called using "codethink04-arm64 codethink03-arm64" as arguments. Fri Oct 31 21:24:57 UTC 2025 - actually running "reproducible_build.sh" (md5sum bcb6fe1b50cf4e8eedacd0971a9eb63f) as "/tmp/jenkins-script-1tqWY0wX" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Oct 31 21:24:57 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Oct 31 21:24:57 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-Zx5ScV' Fri Oct 31 21:24:57 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Oct 31 21:24:57 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-UJKwy7' ok, let's check if libposix-strptime-perl is building anywhere yet… ok, libposix-strptime-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libposix-strptime-perl in forky on arm64 on jenkins now. 1st build will be done on codethink04-arm64.debian.net. 2nd build will be done on codethink03-arm64.debian.net. ============================================================================= Fri Oct 31 21:25:11 UTC 2025 I: starting to build libposix-strptime-perl/forky/arm64 on jenkins on '2025-10-31 21:24' Fri Oct 31 21:25:11 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_8/94647/console.log 1761945911 arm64 forky libposix-strptime-perl Fri Oct 31 21:25:11 UTC 2025 I: Downloading source for forky/libposix-strptime-perl=0.13-2 --2025-10-31 21:25:11-- http://deb.debian.org/debian/pool/main/libp/libposix-strptime-perl/libposix-strptime-perl_0.13-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2155 (2.1K) [text/prs.lines.tag] Saving to: ‘libposix-strptime-perl_0.13-2.dsc’ 0K .. 100% 274M=0s 2025-10-31 21:25:11 (274 MB/s) - ‘libposix-strptime-perl_0.13-2.dsc’ saved [2155/2155] --2025-10-31 21:25:11-- http://deb.debian.org/debian/pool/main/libp/libposix-strptime-perl/libposix-strptime-perl_0.13-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2155 (2.1K) [text/prs.lines.tag] Saving to: ‘libposix-strptime-perl_0.13-2.dsc’ 0K .. 100% 274M=0s 2025-10-31 21:25:11 (274 MB/s) - ‘libposix-strptime-perl_0.13-2.dsc’ saved [2155/2155] Fri Oct 31 21:25:11 UTC 2025 I: libposix-strptime-perl_0.13-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libposix-strptime-perl Binary: libposix-strptime-perl Architecture: any Version: 0.13-2 Maintainer: Debian Perl Group Uploaders: Salvatore Bonaccorso Homepage: https://metacpan.org/release/POSIX-strptime Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl:native Package-List: libposix-strptime-perl deb perl optional arch=any Checksums-Sha1: 8ea166bebd4f3d7736b83b86b4414046251ae0c3 49179 libposix-strptime-perl_0.13.orig.tar.gz ddbbd28e50764af73d2b0c998cd245c76f96074b 2360 libposix-strptime-perl_0.13-2.debian.tar.xz Checksums-Sha256: a818109829e35a4ac79677d68063865f40c87c99ca7f3a20890177a8f8e5c277 49179 libposix-strptime-perl_0.13.orig.tar.gz 4991495ca2eb4207a9d15dad9e75f54cdb739d407f782195340306ad6454d718 2360 libposix-strptime-perl_0.13-2.debian.tar.xz Files: 7934fb6f9905f883929ec84ad420ff4c 49179 libposix-strptime-perl_0.13.orig.tar.gz 9fa8f820b322b69987383e5723340714 2360 libposix-strptime-perl_0.13-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKsLzQACgkQV5wWDUye I+jKSg//eU29tSYEe4zc2envMzzcOVsL9c/NLO3zNvZiFfQxrrv97G0scegGi775 mUEEW0AYkelyX0f0f1U3+NVwrGNPewd6+jlGvF4u+o8O6+y6bKfGyy7hxgE0FAMK sny6Aa9nWegI66Q8nR+c3aysgp0WeluAyRW+2J4i24WzyVaNHH83zb3MPDwHvp++ v5258nGwcnC/Ok+zHZzbKqsX26m+zkmeS579HJ8iesx12eOzq0yHldfUsk6jmVJV TU6rc1zfdccUfNks3AtiDMmzM8RB5QIbMZNIkZsQNeIl/B/ywVtksEwxBlwipdCG y4f0QYOhK/8FP1MbfQ6z0gPNRGOWQeHNX0+eMISWmSv0FIUV5LLs+0HcAbATVWZS IrGCkHm4YqmnORO4lqIEGBL8f6EFoBpEsguopvTejO/Ct22JaK63xHBYjo5a+I9U ocH4T0g1t5CoQQ+xIQFiIXlxggdf3/5DCXpjEvfY78lAjIWr5v494EeOLqeK70iH bKV6ZK0vzGfsmkp966r5QZtzA3SEqeHHmw7YlKH2a5PMqXNmdB0U7L5eRr+c471Y /7XrTgwUKZkvtgscDa6EHSa/I/HuUANZOmHwsFKmf2enCacdZRqspPogEWx2EzqL 1uqfRjGCVf/McqECC9yTgnIB+gIrPr98Qx2mmLmWQeoU1jroJrg= =QiD6 -----END PGP SIGNATURE----- Fri Oct 31 21:25:11 UTC 2025 I: Checking whether the package is not for us Fri Oct 31 21:25:11 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net. Fri Oct 31 21:25:11 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net. Fri Oct 31 21:25:11 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink04-arm64.debian.net is marked as down. Fri Oct 31 21:25:11 UTC 2025 - checking via ssh if codethink04-arm64.debian.net is up. removed '/tmp/read-only-fs-test-bpxWtO' ==================================================================================== Fri Oct 31 21:25:12 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink04-arm64, called using "1 libposix-strptime-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1 0.13-2" as arguments. Fri Oct 31 21:25:12 UTC 2025 - actually running "reproducible_build.sh" (md5sum bcb6fe1b50cf4e8eedacd0971a9eb63f) as "/tmp/jenkins-script-A1GKctCB" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Oct 31 21:25:12 UTC 2025 I: Downloading source for forky/libposix-strptime-perl=0.13-2 Reading package lists... NOTICE: 'libposix-strptime-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 53.7 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (dsc) [2155 B] Get:2 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (tar) [49.2 kB] Get:3 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (diff) [2360 B] Fetched 53.7 kB in 0s (894 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libposix-strptime-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 53.7 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (dsc) [2155 B] Get:2 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (tar) [49.2 kB] Get:3 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (diff) [2360 B] Fetched 53.7 kB in 0s (894 kB/s) Download complete and in download only mode ============================================================================= Building libposix-strptime-perl in forky on arm64 on codethink04-arm64 now. Date: Fri Oct 31 21:25:13 GMT 2025 Date UTC: Fri Oct 31 21:25:13 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 09:25:13 -12 2025 I: pbuilder-time-stamp: 1761945913 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libposix-strptime-perl_0.13-2.dsc] I: copying [./libposix-strptime-perl_0.13.orig.tar.gz] I: copying [./libposix-strptime-perl_0.13-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libposix-strptime-perl_0.13-2.dsc: no acceptable signature found dpkg-source: info: extracting libposix-strptime-perl in libposix-strptime-perl-0.13 dpkg-source: info: unpacking libposix-strptime-perl_0.13.orig.tar.gz dpkg-source: info: unpacking libposix-strptime-perl_0.13-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3703459/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='792d58fa18824dba8a3eb9e4b625f459' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3703459' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_K37C --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1 --logfile b1/build.log libposix-strptime-perl_0.13-2.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3703459/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 50.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.6+dfsg-0.1 [601 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Fetched 12.0 MB in 0s (102 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.6+dfsg-0.1_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). Solving dependencies... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libposix-strptime-perl-0.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libposix-strptime-perl_0.13-2_source.changes dpkg-buildpackage: info: source package libposix-strptime-perl dpkg-buildpackage: info: source version 0.13-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for POSIX::strptime Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' Running Mkbootstrap for strptime () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' strptime.xs > strptime.xsc cp lib/POSIX/strptime.pm blib/lib/POSIX/strptime.pm chmod 644 "strptime.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Please specify prototyping behavior for strptime.xs (see perlxs manual) mv strptime.xsc strptime.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.13\" -DXS_VERSION=\"0.13\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" strptime.c rm -f blib/arch/auto/POSIX/strptime/strptime.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong strptime.o -o blib/arch/auto/POSIX/strptime/strptime.so \ \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/POSIX/strptime/strptime.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' dh_auto_test -- TEST_FILES="t/POSIX-strptime.t" make -j12 test TEST_VERBOSE=1 TEST_FILES=t/POSIX-strptime.t make[2]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/POSIX-strptime.t t/POSIX-strptime.t .. 1..7 ok 1 - use POSIX::strptime; ok 2 - 1899-04-15|%F|undef undef undef 15 3 -1|linux ok 3 - 1707-04-15|%F|undef undef undef 15 3 -193|linux ok 4 - 2005-02-04 10:32:34|%F %T|34 32 10 4 1 105 ok 5 - 2005-02-04|%F|undef undef undef 4 1 105 ok 6 - 10:32:34|%H:%M:%S|34 32 10 undef undef undef undef undef ok 7 - blah blah|%H:%M:%S|undef undef undef undef undef undef undef undef ok All tests successful. Files=1, Tests=7, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.08 cusr 0.02 csys = 0.13 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libposix-strptime-perl/ make -j12 install DESTDIR=/build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/POSIX/strptime/strptime.so Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/POSIX/strptime.pm Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/share/man/man3/POSIX::strptime.3pm make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libposix-strptime-perl' in '../libposix-strptime-perl_0.13-2_arm64.deb'. dpkg-deb: building package 'libposix-strptime-perl-dbgsym' in '../libposix-strptime-perl-dbgsym_0.13-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libposix-strptime-perl_0.13-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libposix-strptime-perl_0.13-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3703459 and its subdirectories I: Current time: Fri Oct 31 09:25:33 -12 2025 I: pbuilder-time-stamp: 1761945933 Fri Oct 31 21:25:33 UTC 2025 I: Signing ./b1/libposix-strptime-perl_0.13-2_arm64.buildinfo as libposix-strptime-perl_0.13-2_arm64.buildinfo.asc Fri Oct 31 21:25:34 UTC 2025 I: Signed ./b1/libposix-strptime-perl_0.13-2_arm64.buildinfo as ./b1/libposix-strptime-perl_0.13-2_arm64.buildinfo.asc Fri Oct 31 21:25:34 UTC 2025 - build #1 for libposix-strptime-perl/forky/arm64 on codethink04-arm64 done. Starting cleanup. All cleanup done. Fri Oct 31 21:25:34 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-A1GKctCB, removing. /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1: total 16 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 21:25 b1 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 21:25 b2 -rw-rw-r-- 1 jenkins jenkins 2155 Jun 17 2022 libposix-strptime-perl_0.13-2.dsc -rw------- 1 jenkins jenkins 3361 Oct 31 21:25 rbuildlog.soQ4tqK /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1: total 96 -rw-r--r-- 1 jenkins jenkins 23374 Oct 31 21:25 build.log -rw-r--r-- 1 jenkins jenkins 25276 Oct 31 21:25 libposix-strptime-perl-dbgsym_0.13-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2360 Oct 31 21:25 libposix-strptime-perl_0.13-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2155 Oct 31 21:25 libposix-strptime-perl_0.13-2.dsc -rw-r--r-- 1 jenkins jenkins 4894 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5776 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1991 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 8552 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1799 Oct 31 21:25 libposix-strptime-perl_0.13-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2: total 0 Fri Oct 31 21:25:34 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Oct 31 09:25:13 -12 2025 I: pbuilder-time-stamp: 1761945913 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libposix-strptime-perl_0.13-2.dsc] I: copying [./libposix-strptime-perl_0.13.orig.tar.gz] I: copying [./libposix-strptime-perl_0.13-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libposix-strptime-perl_0.13-2.dsc: no acceptable signature found dpkg-source: info: extracting libposix-strptime-perl in libposix-strptime-perl-0.13 dpkg-source: info: unpacking libposix-strptime-perl_0.13.orig.tar.gz dpkg-source: info: unpacking libposix-strptime-perl_0.13-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3703459/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='forky' HOME='/root' HOST_ARCH='arm64' IFS=' ' INVOCATION_ID='792d58fa18824dba8a3eb9e4b625f459' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3703459' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_K37C --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1 --logfile b1/build.log libposix-strptime-perl_0.13-2.dsc' SUDO_GID='109' SUDO_HOME='/var/lib/jenkins' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.4:3128' I: uname -a Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3703459/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 50.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.6+dfsg-0.1 [601 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Fetched 12.0 MB in 0s (102 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.6+dfsg-0.1_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). Solving dependencies... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libposix-strptime-perl-0.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libposix-strptime-perl_0.13-2_source.changes dpkg-buildpackage: info: source package libposix-strptime-perl dpkg-buildpackage: info: source version 0.13-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for POSIX::strptime Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' Running Mkbootstrap for strptime () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' strptime.xs > strptime.xsc cp lib/POSIX/strptime.pm blib/lib/POSIX/strptime.pm chmod 644 "strptime.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Please specify prototyping behavior for strptime.xs (see perlxs manual) mv strptime.xsc strptime.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.13\" -DXS_VERSION=\"0.13\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" strptime.c rm -f blib/arch/auto/POSIX/strptime/strptime.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong strptime.o -o blib/arch/auto/POSIX/strptime/strptime.so \ \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/POSIX/strptime/strptime.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' dh_auto_test -- TEST_FILES="t/POSIX-strptime.t" make -j12 test TEST_VERBOSE=1 TEST_FILES=t/POSIX-strptime.t make[2]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/POSIX-strptime.t t/POSIX-strptime.t .. 1..7 ok 1 - use POSIX::strptime; ok 2 - 1899-04-15|%F|undef undef undef 15 3 -1|linux ok 3 - 1707-04-15|%F|undef undef undef 15 3 -193|linux ok 4 - 2005-02-04 10:32:34|%F %T|34 32 10 4 1 105 ok 5 - 2005-02-04|%F|undef undef undef 4 1 105 ok 6 - 10:32:34|%H:%M:%S|34 32 10 undef undef undef undef undef ok 7 - blah blah|%H:%M:%S|undef undef undef undef undef undef undef undef ok All tests successful. Files=1, Tests=7, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.08 cusr 0.02 csys = 0.13 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libposix-strptime-perl/ make -j12 install DESTDIR=/build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/POSIX/strptime/strptime.so Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/POSIX/strptime.pm Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/share/man/man3/POSIX::strptime.3pm make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libposix-strptime-perl' in '../libposix-strptime-perl_0.13-2_arm64.deb'. dpkg-deb: building package 'libposix-strptime-perl-dbgsym' in '../libposix-strptime-perl-dbgsym_0.13-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libposix-strptime-perl_0.13-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libposix-strptime-perl_0.13-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3703459 and its subdirectories I: Current time: Fri Oct 31 09:25:33 -12 2025 I: pbuilder-time-stamp: 1761945933 Fri Oct 31 21:25:35 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net. Fri Oct 31 21:25:35 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net. Fri Oct 31 21:25:35 UTC 2025 - checking /var/lib/jenkins/offline_nodes if codethink03-arm64.debian.net is marked as down. Fri Oct 31 21:25:35 UTC 2025 - checking via ssh if codethink03-arm64.debian.net is up. removed '/tmp/read-only-fs-test-yfPiYz' ==================================================================================== Fri Dec 4 03:48:35 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on codethink03-arm64, called using "2 libposix-strptime-perl forky /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1 0.13-2" as arguments. Fri Dec 4 03:48:35 UTC 2026 - actually running "reproducible_build.sh" (md5sum bcb6fe1b50cf4e8eedacd0971a9eb63f) as "/tmp/jenkins-script-DnTvnYb4" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Dec 4 03:48:36 UTC 2026 I: Downloading source for forky/libposix-strptime-perl=0.13-2 Reading package lists... NOTICE: 'libposix-strptime-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 53.7 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (dsc) [2155 B] Get:2 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (tar) [49.2 kB] Get:3 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (diff) [2360 B] Fetched 53.7 kB in 0s (2956 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libposix-strptime-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libposix-strptime-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 53.7 kB of source archives. Get:1 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (dsc) [2155 B] Get:2 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (tar) [49.2 kB] Get:3 http://deb.debian.org/debian forky/main libposix-strptime-perl 0.13-2 (diff) [2360 B] Fetched 53.7 kB in 0s (2956 kB/s) Download complete and in download only mode ============================================================================= Re-Building libposix-strptime-perl in forky on arm64 on codethink03-arm64 now. Date: Fri Dec 4 03:48:36 GMT 2026 Date UTC: Fri Dec 4 03:48:36 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1 + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_DDJE + case ${ARCH} in + case $ARCH in + locale=nl_BE + language=nl + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libposix-strptime-perl = debian-installer -o libposix-strptime-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libposix-strptime-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_DDJE --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2 --logfile b2/build.log libposix-strptime-perl_0.13-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Dec 4 17:48:36 +14 2026 I: pbuilder-time-stamp: 1796356116 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libposix-strptime-perl_0.13-2.dsc] I: copying [./libposix-strptime-perl_0.13.orig.tar.gz] I: copying [./libposix-strptime-perl_0.13-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libposix-strptime-perl_0.13-2.dsc: no acceptable signature found dpkg-source: info: extracting libposix-strptime-perl in libposix-strptime-perl-0.13 dpkg-source: info: unpacking libposix-strptime-perl_0.13.orig.tar.gz dpkg-source: info: unpacking libposix-strptime-perl_0.13-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D01_modify_environment starting debug: Running on codethink03-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 4 03:48 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 nocheck' DIRSTACK=() DISTRIBUTION=forky EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=f56b4edb79c2430baca6469a74464d30 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=3722447 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_DDJE --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2 --logfile b2/build.log libposix-strptime-perl_0.13-2.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After unpacking 50.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.2-4 [97.3 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-2 [315 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.18.1-2 [877 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.28 [92.4 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-7 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 21 [12.2 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.6+dfsg-0.1 [601 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Fetched 12.0 MB in 0s (82.6 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.2-4_arm64.deb ... Unpacking bsdextrautils (2.41.2-4) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-2_arm64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-2_all.deb ... Unpacking automake (1:1.18.1-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.28_all.deb ... Unpacking libdebhelper-perl (13.28) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-7_all.deb ... Unpacking libtool (2.5.4-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.6+dfsg-0.1_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.28_all.deb ... Unpacking debhelper (13.28) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../29-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.2-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.6+dfsg-0.1) ... Setting up libdebhelper-perl (13.28) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-2) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up automake (1:1.18.1-2) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.28) ... Processing triggers for libc-bin (2.41-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.2-1). Solving dependencies... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for forky I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libposix-strptime-perl-0.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libposix-strptime-perl_0.13-2_source.changes dpkg-buildpackage: info: source package libposix-strptime-perl dpkg-buildpackage: info: source version 0.13-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" LD="aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for POSIX::strptime Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' strptime.xs > strptime.xsc Running Mkbootstrap for strptime () chmod 644 "strptime.bs" cp lib/POSIX/strptime.pm blib/lib/POSIX/strptime.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Please specify prototyping behavior for strptime.xs (see perlxs manual) mv strptime.xsc strptime.c aarch64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.13\" -DXS_VERSION=\"0.13\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" strptime.c rm -f blib/arch/auto/POSIX/strptime/strptime.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libposix-strptime-perl-0.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong strptime.o -o blib/arch/auto/POSIX/strptime/strptime.so \ \ /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/POSIX/strptime/strptime.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' dh: command-omitted: The call to "debian/rules override_dh_auto_test" was omitted due to "DEB_BUILD_OPTIONS=nocheck" create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libposix-strptime-perl/ make -j12 install DESTDIR=/build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/POSIX/strptime/strptime.so Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/POSIX/strptime.pm Installing /build/reproducible-path/libposix-strptime-perl-0.13/debian/libposix-strptime-perl/usr/share/man/man3/POSIX::strptime.3pm make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libposix-strptime-perl-dbgsym' in '../libposix-strptime-perl-dbgsym_0.13-2_arm64.deb'. dpkg-deb: building package 'libposix-strptime-perl' in '../libposix-strptime-perl_0.13-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libposix-strptime-perl_0.13-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libposix-strptime-perl_0.13-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3722447 and its subdirectories I: Current time: Fri Dec 4 17:49:04 +14 2026 I: pbuilder-time-stamp: 1796356144 + false + set +x Fri Dec 4 03:49:04 UTC 2026 I: Signing ./b2/libposix-strptime-perl_0.13-2_arm64.buildinfo as libposix-strptime-perl_0.13-2_arm64.buildinfo.asc Fri Dec 4 03:49:04 UTC 2026 I: Signed ./b2/libposix-strptime-perl_0.13-2_arm64.buildinfo as ./b2/libposix-strptime-perl_0.13-2_arm64.buildinfo.asc Fri Dec 4 03:49:04 UTC 2026 - build #2 for libposix-strptime-perl/forky/arm64 on codethink03-arm64 done. Starting cleanup. All cleanup done. Fri Dec 4 03:49:04 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-DnTvnYb4, removing. /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1: total 40 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 21:25 b1 drwxrwxr-x 2 jenkins jenkins 4096 Oct 31 21:26 b2 -rw-rw-r-- 1 jenkins jenkins 2155 Jun 17 2022 libposix-strptime-perl_0.13-2.dsc -rw------- 1 jenkins jenkins 27036 Oct 31 21:25 rbuildlog.soQ4tqK /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1: total 96 -rw-r--r-- 1 jenkins jenkins 23374 Oct 31 21:25 build.log -rw-r--r-- 1 jenkins jenkins 25276 Oct 31 21:25 libposix-strptime-perl-dbgsym_0.13-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2360 Oct 31 21:25 libposix-strptime-perl_0.13-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2155 Oct 31 21:25 libposix-strptime-perl_0.13-2.dsc -rw-r--r-- 1 jenkins jenkins 4894 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5776 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1991 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 8552 Oct 31 21:25 libposix-strptime-perl_0.13-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 1799 Oct 31 21:25 libposix-strptime-perl_0.13-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2: total 96 -rw-rw-r-- 1 jenkins jenkins 24135 Oct 31 21:26 build.log -rw-r--r-- 1 jenkins jenkins 25276 Oct 31 21:26 libposix-strptime-perl-dbgsym_0.13-2_arm64.deb -rw-r--r-- 1 jenkins jenkins 2360 Oct 31 21:26 libposix-strptime-perl_0.13-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2155 Oct 31 21:26 libposix-strptime-perl_0.13-2.dsc -rw-rw-r-- 1 jenkins jenkins 4902 Oct 31 21:26 libposix-strptime-perl_0.13-2_arm64.buildinfo -rw-rw-r-- 1 jenkins jenkins 5784 Oct 31 21:26 libposix-strptime-perl_0.13-2_arm64.buildinfo.asc -rw-rw-r-- 1 jenkins jenkins 1991 Oct 31 21:26 libposix-strptime-perl_0.13-2_arm64.changes -rw-r--r-- 1 jenkins jenkins 8552 Oct 31 21:26 libposix-strptime-perl_0.13-2_arm64.deb -rw-rw-r-- 1 jenkins jenkins 1799 Oct 31 21:26 libposix-strptime-perl_0.13-2_source.changes Fri Oct 31 21:26:04 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net. Fri Oct 31 21:26:05 UTC 2025 I: libposix-strptime-perl_0.13-2_arm64.changes: Format: 1.8 Date: Fri, 17 Jun 2022 08:36:56 +0100 Source: libposix-strptime-perl Binary: libposix-strptime-perl libposix-strptime-perl-dbgsym Architecture: arm64 Version: 0.13-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libposix-strptime-perl - Perl extension to the POSIX date parsing strptime(3) function Changes: libposix-strptime-perl (0.13-2) unstable; urgency=medium . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from deprecated 9 to 12. * Set debhelper-compat version in Build-Depends. Checksums-Sha1: dc6dc3968b5d489b1a055211f53a3140918e6ea5 25276 libposix-strptime-perl-dbgsym_0.13-2_arm64.deb 58bea4a70b9738bcc3bac44278ec81ab692291d4 4894 libposix-strptime-perl_0.13-2_arm64.buildinfo f908303c2f28673444e65ec38c222bca5bd990ac 8552 libposix-strptime-perl_0.13-2_arm64.deb Checksums-Sha256: 13664166657b18bf39a760d4ffb2a655f915ff95c011713f6235cc79039ecd8d 25276 libposix-strptime-perl-dbgsym_0.13-2_arm64.deb 4749d1a53fa60c895ffe66d2ecedcaeb3e1846427f44a388c27d648d452af232 4894 libposix-strptime-perl_0.13-2_arm64.buildinfo e671602013aefcb38e176b7cc3dd84b6811114633245e81f9159a029df80c586 8552 libposix-strptime-perl_0.13-2_arm64.deb Files: 3d9b750cae40360934a47a8815259200 25276 debug optional libposix-strptime-perl-dbgsym_0.13-2_arm64.deb 5866a64f4ef1d605ab2369041bbc6567 4894 perl optional libposix-strptime-perl_0.13-2_arm64.buildinfo 1b9d4800fb9db000c042d922d22f9019 8552 perl optional libposix-strptime-perl_0.13-2_arm64.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libposix-strptime-perl_0.13-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libposix-strptime-perl_0.13-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/forky/arm64/libposix-strptime-perl_0.13-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/forky/arm64/libposix-strptime-perl_0.13-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/forky/arm64/libposix-strptime-perl_0.13-2_arm64.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libposix-strptime-perl_0.13-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-10-31 21:25:34.576416578 +0000 +++ b2/build.log 2025-10-31 21:26:04.740454271 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Fri Oct 31 09:25:13 -12 2025 -I: pbuilder-time-stamp: 1761945913 +I: Current time: Fri Dec 4 17:48:36 +14 2026 +I: pbuilder-time-stamp: 1796356116 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration @@ -22,53 +22,85 @@ dpkg-source: info: unpacking libposix-strptime-perl_0.13-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/3703459/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D01_modify_environment starting +debug: Running on codethink03-arm64. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 4 03:48 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='arm64' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' - DISTRIBUTION='forky' - HOME='/root' - HOST_ARCH='arm64' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") + BASH_VERSION='5.3.3(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=arm64 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 nocheck' + DIRSTACK=() + DISTRIBUTION=forky + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=aarch64 + HOST_ARCH=arm64 IFS=' ' - INVOCATION_ID='792d58fa18824dba8a3eb9e4b625f459' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='3703459' - PS1='# ' - PS2='> ' + INVOCATION_ID=f56b4edb79c2430baca6469a74464d30 + LANG=C + LANGUAGE=nl_BE:nl + LC_ALL=C + MACHTYPE=aarch64-unknown-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=3722447 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_K37C --distribution forky --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1 --logfile b1/build.log libposix-strptime-perl_0.13-2.dsc' - SUDO_GID='109' - SUDO_HOME='/var/lib/jenkins' - SUDO_UID='104' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://192.168.101.4:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/pbuilderrc_DDJE --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2 --logfile b2/build.log libposix-strptime-perl_0.13-2.dsc' + SUDO_GID=109 + SUDO_HOME=/var/lib/jenkins + SUDO_UID=104 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://192.168.101.4:3128 I: uname -a - Linux codethink04-arm64 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.12.48+deb13-cloud-arm64 #1 SMP Debian 6.12.48-1 (2025-09-20) aarch64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/3703459/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 10 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -137,7 +169,7 @@ Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.28 [941 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] -Fetched 12.0 MB in 0s (102 MB/s) +Fetched 12.0 MB in 0s (82.6 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19971 files and directories currently installed.) @@ -278,7 +310,11 @@ Solving dependencies... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libposix-strptime-perl-0.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libposix-strptime-perl_0.13-2_source.changes +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for forky +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libposix-strptime-perl-0.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libposix-strptime-perl_0.13-2_source.changes dpkg-buildpackage: info: source package libposix-strptime-perl dpkg-buildpackage: info: source version 0.13-2 dpkg-buildpackage: info: source distribution unstable @@ -302,10 +338,10 @@ dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' -Running Mkbootstrap for strptime () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' strptime.xs > strptime.xsc -cp lib/POSIX/strptime.pm blib/lib/POSIX/strptime.pm +Running Mkbootstrap for strptime () chmod 644 "strptime.bs" +cp lib/POSIX/strptime.pm blib/lib/POSIX/strptime.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 Please specify prototyping behavior for strptime.xs (see perlxs manual) mv strptime.xsc strptime.c @@ -319,28 +355,7 @@ chmod 755 blib/arch/auto/POSIX/strptime/strptime.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' - debian/rules override_dh_auto_test -make[1]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' -dh_auto_test -- TEST_FILES="t/POSIX-strptime.t" - make -j12 test TEST_VERBOSE=1 TEST_FILES=t/POSIX-strptime.t -make[2]: Entering directory '/build/reproducible-path/libposix-strptime-perl-0.13' -"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- strptime.bs blib/arch/auto/POSIX/strptime/strptime.bs 644 -PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/POSIX-strptime.t -t/POSIX-strptime.t .. -1..7 -ok 1 - use POSIX::strptime; -ok 2 - 1899-04-15|%F|undef undef undef 15 3 -1|linux -ok 3 - 1707-04-15|%F|undef undef undef 15 3 -193|linux -ok 4 - 2005-02-04 10:32:34|%F %T|34 32 10 4 1 105 -ok 5 - 2005-02-04|%F|undef undef undef 4 1 105 -ok 6 - 10:32:34|%H:%M:%S|34 32 10 undef undef undef undef undef -ok 7 - blah blah|%H:%M:%S|undef undef undef undef undef undef undef undef -ok -All tests successful. -Files=1, Tests=7, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.08 cusr 0.02 csys = 0.13 CPU) -Result: PASS -make[2]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' -make[1]: Leaving directory '/build/reproducible-path/libposix-strptime-perl-0.13' +dh: command-omitted: The call to "debian/rules override_dh_auto_test" was omitted due to "DEB_BUILD_OPTIONS=nocheck" create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libposix-strptime-perl/ @@ -374,8 +389,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libposix-strptime-perl' in '../libposix-strptime-perl_0.13-2_arm64.deb'. dpkg-deb: building package 'libposix-strptime-perl-dbgsym' in '../libposix-strptime-perl-dbgsym_0.13-2_arm64.deb'. +dpkg-deb: building package 'libposix-strptime-perl' in '../libposix-strptime-perl_0.13-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libposix-strptime-perl_0.13-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libposix-strptime-perl_0.13-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -383,12 +398,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/3722447/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/3703459 and its subdirectories -I: Current time: Fri Oct 31 09:25:33 -12 2025 -I: pbuilder-time-stamp: 1761945933 +I: removing directory /srv/workspace/pbuilder/3722447 and its subdirectories +I: Current time: Fri Dec 4 17:49:04 +14 2026 +I: pbuilder-time-stamp: 1796356144 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libposix-strptime-perl_0.13-2.diff: 68.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/forky/arm64/libposix-strptime-perl_0.13-2.diff.gz b2/build.log: 73.9% -- replaced with stdout Compressing the 1st log... b1/build.log: 74.5% -- replaced with stdout Fri Oct 31 21:26:05 UTC 2025 I: diffoscope 306 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libposix-strptime-perl_forky_arm64_1761945965 + touch /var/log/reproducible-builds/diffoscope_stamp_libposix-strptime-perl_forky_arm64_1761945965 + RESULT=0 + systemd-run '--description=diffoscope on libposix-strptime-perl/0.13-2 in forky/arm64' --slice=rb-build-diffoscope.slice -u rb-diffoscope-arm64_8-94647 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1 --run-session -c jenkins-reproducible-forky-diffoscope-ac9ac5cd-1538-484c-9a52-dc6fdb489b80 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/dbd-tmp-ZUtkOjW ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/libposix-strptime-perl_0.13-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/libposix-strptime-perl_0.13-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/libposix-strptime-perl_0.13-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1/libposix-strptime-perl_0.13-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2/libposix-strptime-perl_0.13-2_arm64.changes' + false + set +x Running as unit: rb-diffoscope-arm64_8-94647.service; invocation ID: a183a86a978e4308b38bedc9c249ca94 # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/libposix-strptime-perl_0.13-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/libposix-strptime-perl_0.13-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/libposix-strptime-perl_0.13-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b1/libposix-strptime-perl_0.13-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.QOSlNmN1/b2/libposix-strptime-perl_0.13-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 198ms CPU time consumed: 168ms Memory peak: 17.5M (swap: 0B) _ _ _ _ _ _ _ | (_) |__ _ __ ___ ___(_)_ __ ___| |_ _ __ _ __ | |_(_)_ __ ___ ___ | | | '_ \| '_ \ / _ \/ __| \ \/ /____/ __| __| '__| '_ \| __| | '_ ` _ \ / _ \ | | | |_) | |_) | (_) \__ \ |> <_____\__ \ |_| | | |_) | |_| | | | | | | __/ |_|_|_.__/| .__/ \___/|___/_/_/\_\ |___/\__|_| | .__/ \__|_|_| |_| |_|\___| |_| |_| _ _ __ ___ _ __| | _____| '_ \ / _ \ '__| | |_____| |_) | __/ | | | | .__/ \___|_| |_| |_| Fri Oct 31 21:26:06 UTC 2025 I: diffoscope 306 found no differences in the changes files, and a .buildinfo file also exists. Fri Oct 31 21:26:06 UTC 2025 I: libposix-strptime-perl from forky built successfully and reproducibly on arm64. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-10-31 21:26:06] INFO: Starting at 2025-10-31 21:26:06.946580 [2025-10-31 21:26:07] INFO: Generating the pages of 1 package(s) [2025-10-31 21:26:07] CRITICAL: https://tests.reproducible-builds.org/debian/forky/arm64/libposix-strptime-perl didn't produce a buildlog, even though it has been built. [2025-10-31 21:26:07] INFO: Finished at 2025-10-31 21:26:07.215216, took: 0:00:00.268639 Fri Oct 31 21:26:07 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/forky/arm64/libposix-strptime-perl.html Fri Oct 31 21:26:07 UTC 2025 I: Removing signed libposix-strptime-perl_0.13-2_arm64.buildinfo.asc files: removed './b1/libposix-strptime-perl_0.13-2_arm64.buildinfo.asc' removed './b2/libposix-strptime-perl_0.13-2_arm64.buildinfo.asc' 1761945967 arm64 forky libposix-strptime-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libposix-strptime-perl_0.13-2.rbuild.log: 71.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/forky/arm64/libposix-strptime-perl_0.13-2.rbuild.log.gz [2025-10-31 21:26:07] INFO: Starting at 2025-10-31 21:26:07.536512 [2025-10-31 21:26:07] INFO: Generating the pages of 1 package(s) [2025-10-31 21:26:07] INFO: Finished at 2025-10-31 21:26:07.803870, took: 0:00:00.267362 All cleanup done. Fri Oct 31 21:26:07 UTC 2025 - total duration: 0h 1m 9s. Fri Oct 31 21:26:07 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-1tqWY0wX, removing. Finished with result: success Main processes terminated with: code=exited, status=0/SUCCESS Service runtime: 1min 10.815s CPU time consumed: 3.061s Memory peak: 38.8M (swap: 0B)