Running as unit: rb-build-armhf_8-11701.service ==================================================================================== Tue Nov 26 02:31:21 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_armhf_8) on jenkins, called using "virt64a-armhf-rb virt32c-armhf-rb" as arguments. Tue Nov 26 02:31:21 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-OxZYIVXE" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Nov 26 02:31:21 UTC 2024 - checking /var/lib/jenkins/offline_nodes if virt64a-armhf-rb.debian.net is marked as down. Tue Nov 26 02:31:21 UTC 2024 - checking via ssh if virt64a-armhf-rb.debian.net is up. removed '/tmp/read-only-fs-test-DK2E1D' Tue Nov 26 02:31:25 UTC 2024 - checking /var/lib/jenkins/offline_nodes if virt32c-armhf-rb.debian.net is marked as down. Tue Nov 26 02:31:25 UTC 2024 - checking via ssh if virt32c-armhf-rb.debian.net is up. removed '/tmp/read-only-fs-test-FxdCLy' ok, let's check if libnet-telnet-cisco-perl is building anywhere yet… ok, libnet-telnet-cisco-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libnet-telnet-cisco-perl in trixie on armhf on jenkins now. 1st build will be done on virt64a-armhf-rb.debian.net. 2nd build will be done on virt32c-armhf-rb.debian.net. ============================================================================= Tue Nov 26 02:31:43 UTC 2024 I: starting to build libnet-telnet-cisco-perl/trixie/armhf on jenkins on '2024-11-26 02:31' Tue Nov 26 02:31:43 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_8/11701/console.log 1732588303 armhf trixie libnet-telnet-cisco-perl Tue Nov 26 02:31:43 UTC 2024 I: Downloading source for trixie/libnet-telnet-cisco-perl=1.12-2 --2024-11-26 02:31:43-- http://deb.debian.org/debian/pool/main/libn/libnet-telnet-cisco-perl/libnet-telnet-cisco-perl_1.12-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2252 (2.2K) [text/prs.lines.tag] Saving to: ‘libnet-telnet-cisco-perl_1.12-2.dsc’ 0K .. 100% 296M=0s 2024-11-26 02:31:43 (296 MB/s) - ‘libnet-telnet-cisco-perl_1.12-2.dsc’ saved [2252/2252] --2024-11-26 02:31:43-- http://deb.debian.org/debian/pool/main/libn/libnet-telnet-cisco-perl/libnet-telnet-cisco-perl_1.12-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2252 (2.2K) [text/prs.lines.tag] Saving to: ‘libnet-telnet-cisco-perl_1.12-2.dsc’ 0K .. 100% 296M=0s 2024-11-26 02:31:43 (296 MB/s) - ‘libnet-telnet-cisco-perl_1.12-2.dsc’ saved [2252/2252] Tue Nov 26 02:31:43 UTC 2024 I: libnet-telnet-cisco-perl_1.12-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libnet-telnet-cisco-perl Binary: libnet-telnet-cisco-perl Architecture: all Version: 1.12-2 Maintainer: Debian Perl Group Uploaders: Roland Rosenfeld , Homepage: https://metacpan.org/release/Net-Telnet-Cisco Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libnet-telnet-perl , libterm-readkey-perl , libtest-simple-perl , perl Package-List: libnet-telnet-cisco-perl deb perl optional arch=all Checksums-Sha1: 814da860575ed0f7098b553ec9aa090177f49fa5 19338 libnet-telnet-cisco-perl_1.12.orig.tar.gz 3f974e67ca0a8a6cf8adf89ac3c491edb6fea7de 3628 libnet-telnet-cisco-perl_1.12-2.debian.tar.xz Checksums-Sha256: b39bcbc6f1ad52df740245cb972f8551d17fa87fa472758ed783a31fc686e0d8 19338 libnet-telnet-cisco-perl_1.12.orig.tar.gz b5e2603e1ded8d51ca9536a6c0ae32f81d3be7da49191a7a11b5f4ecb6ad703c 3628 libnet-telnet-cisco-perl_1.12-2.debian.tar.xz Files: 185438139d1ff104bf471b2f437bb1dc 19338 libnet-telnet-cisco-perl_1.12.orig.tar.gz 8ddab31f432c525200d42dd5f118b308 3628 libnet-telnet-cisco-perl_1.12-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEErC+9sQSUPYpEoCEdAnE7z8pUELIFAmc3LQ8ACgkQAnE7z8pU ELIHlg/+Nq2e1PlYrTzxtQpMAb8hn8NJrk5ZagyrJ0okzSiJGYKMfY4mKejavyjm UkU1Ff9T+bZ4ShqK4kM/YutI1/pjfjeY2rPNJLWZ5x8hmibI6/5WOGFXFbgA29Ax +T8LKxEBR8CPIoArge+Y5AzPvjObziK2j4GN4jui7rut5vZJPdKjAKskZIsy8LUf Mp8m8ZTC5rSlcKhVgyM3ezXrNnAvF7e5s5CzHd2WtegIdP09jvmZ9qOAqQU+vOmT 1/HazzEbOdMX790VzkLVb/4VuFTo1CJ2c6EeGS8tWutXF5wVKnVc+99PxoDluNUn AwqEHH/LKFeuOFuXb+pMhaTzo/1Bvst9zfLJmlNNQfRk68KyM8aKU6sClN20FISK uFNHa7H31sD/djkDbcxMB+EEoikmO6d7gw2MV6DciZnYEHrOS/okc/9JCddpDg+i InDMaUCyHP3NbvxHIL1CGeE1DgncQp4WvWlIGk+7MnnQnJ877Sweo3DtfllYShWe hmdWeNqg/PSMljZK3VrXBNWU9H6Llriqqr3v8zga8nPksjATo3LCd3INqGqbkZxD L5nGHLy40E54yeHl/+KacABo4+YtqgmYZcDNIq4aKFsIp5vSUWeL1hux4mAMGMdj TsjGpktqBTnXVKthOI8Ns32gZUO2oHsjY2g+O0AqkBNwDsnMSRE= =eaLo -----END PGP SIGNATURE----- Tue Nov 26 02:31:43 UTC 2024 I: Checking whether the package is not for us Tue Nov 26 02:31:44 UTC 2024 I: Starting 1st build on remote node virt64a-armhf-rb.debian.net. Tue Nov 26 02:31:44 UTC 2024 I: Preparing to do remote build '1' on virt64a-armhf-rb.debian.net. Tue Nov 26 02:31:44 UTC 2024 - checking /var/lib/jenkins/offline_nodes if virt64a-armhf-rb.debian.net is marked as down. Tue Nov 26 02:31:44 UTC 2024 - checking via ssh if virt64a-armhf-rb.debian.net is up. removed '/tmp/read-only-fs-test-i8mR66' ==================================================================================== Tue Nov 26 02:31:50 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on virt64a, called using "1 libnet-telnet-cisco-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n 1.12-2" as arguments. Tue Nov 26 02:31:50 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-jiAbmVJ7" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Nov 26 02:31:50 UTC 2024 I: Downloading source for trixie/libnet-telnet-cisco-perl=1.12-2 Reading package lists... NOTICE: 'libnet-telnet-cisco-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.2 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (dsc) [2252 B] Get:2 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (tar) [19.3 kB] Get:3 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (diff) [3628 B] Fetched 25.2 kB in 0s (927 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libnet-telnet-cisco-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.2 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (dsc) [2252 B] Get:2 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (tar) [19.3 kB] Get:3 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (diff) [3628 B] Fetched 25.2 kB in 0s (927 kB/s) Download complete and in download only mode ============================================================================= Building libnet-telnet-cisco-perl in trixie on armhf on virt64a now. Date: Tue Nov 26 02:31:50 UTC 2024 Date UTC: Tue Nov 26 02:31:50 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Nov 25 14:31:51 -12 2024 I: pbuilder-time-stamp: 1732588311 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libnet-telnet-cisco-perl_1.12-2.dsc] I: copying [./libnet-telnet-cisco-perl_1.12.orig.tar.gz] I: copying [./libnet-telnet-cisco-perl_1.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Nov 15 11:14:23 2024 gpgv: using RSA key AC2FBDB104943D8A44A0211D02713BCFCA5410B2 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libnet-telnet-cisco-perl_1.12-2.dsc: no acceptable signature found dpkg-source: info: extracting libnet-telnet-cisco-perl in libnet-telnet-cisco-perl-1.12 dpkg-source: info: unpacking libnet-telnet-cisco-perl_1.12.orig.tar.gz dpkg-source: info: unpacking libnet-telnet-cisco-perl_1.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01_manpage-typo.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/31316/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='3af2545f4df4465d83b199b1f897ea36' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='31316' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_JxUY --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1 --logfile b1/build.log libnet-telnet-cisco-perl_1.12-2.dsc' SUDO_GID='114' SUDO_UID='108' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64a 6.1.0-28-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/31316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libnet-telnet-perl, libterm-readkey-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19690 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libnet-telnet-perl; however: Package libnet-telnet-perl is not installed. pbuilder-satisfydepends-dummy depends on libterm-readkey-perl; however: Package libterm-readkey-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libnet-telnet-perl{a} libpipeline1{a} libterm-readkey-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 19.2 MB of archives. After unpacking 70.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3+b1 [98.5 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3+b1 [42.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.22.5-2 [195 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b2 [65.6 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-5 [1091 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.2-11 [83.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.8-1 [35.0 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.13.0-1 [1382 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.192-4 [184 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-5+b1 [9088 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.12.7+dfsg+really2.9.14-0.2+b1 [605 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.22.5-2 [1485 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libnet-telnet-perl all 3.05-2 [56.5 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libterm-readkey-perl armhf 2.38-2+b4 [23.7 kB] Fetched 19.2 MB in 1s (33.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19690 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_armhf.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_armhf.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_armhf.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_armhf.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.8-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_armhf.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../21-libelf1t64_0.192-4_armhf.deb ... Unpacking libelf1t64:armhf (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../23-libicu72_72.1-5+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-5+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_armhf.deb ... Unpacking libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_armhf.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libnet-telnet-perl. Preparing to unpack .../29-libnet-telnet-perl_3.05-2_all.deb ... Unpacking libnet-telnet-perl (3.05-2) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../30-libterm-readkey-perl_2.38-2+b4_armhf.deb ... Unpacking libterm-readkey-perl (2.38-2+b4) ... Setting up libpipeline1:armhf (1.5.8-1) ... Setting up libicu72:armhf (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:armhf (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up libnet-telnet-perl (3.05-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:armhf (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b2) ... Setting up libterm-readkey-perl (2.38-2+b4) ... Setting up libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libnet-telnet-cisco-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libnet-telnet-cisco-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libnet-telnet-cisco-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Roland Rosenfeld dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-telnet-cisco-perl-1.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-telnet-cisco-perl-1.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Net::Telnet::Cisco Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' cp lib/Net/Telnet/Cisco.pm blib/lib/Net/Telnet/Cisco.pm AutoSplitting blib/lib/Net/Telnet/Cisco.pm (blib/lib/auto/Net/Telnet/Cisco) Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl 1..32 ok 1 - use Net::Telnet::Cisco; Net::Telnet::Cisco needs to log into a router to perform it's full suite of tests. To log in, we need a test router, a login, a password, an optional enable password, and an optional SecurID/TACACS PASSCODE. To skip these tests, hit "return". Router: ok 2 - $VERSION set ok 3 # skip Won't login to router without a login and password. ok 4 # skip Won't login to router without a login and password. ok 5 # skip Won't login to router without a login and password. ok 6 # skip Won't login to router without a login and password. ok 7 # skip Won't login to router without a login and password. ok 8 # skip Won't login to router without a login and password. ok 9 # skip Won't login to router without a login and password. ok 10 # skip Won't login to router without a login and password. ok 11 # skip Won't login to router without a login and password. ok 12 # skip Won't login to router without a login and password. ok 13 # skip Won't login to router without a login and password. ok 14 # skip Won't login to router without a login and password. ok 15 # skip Won't login to router without a login and password. ok 16 # skip Won't login to router without a login and password. ok 17 # skip Won't login to router without a login and password. ok 18 # skip Won't login to router without a login and password. ok 19 # skip Won't login to router without a login and password. ok 20 # skip Won't login to router without a login and password. ok 21 # skip Won't login to router without a login and password. ok 22 # skip Won't login to router without a login and password. ok 23 # skip Won't login to router without a login and password. ok 24 # skip Won't login to router without a login and password. ok 25 # skip Won't login to router without a login and password. ok 26 # skip Won't login to router without a login and password. ok 27 # skip Won't login to router without a login and password. ok 28 # skip Won't login to router without a login and password. ok 29 # skip Won't login to router without a login and password. ok 30 # skip Won't enter enabled mode without an enable password ok 31 # skip Won't enter enabled mode without an enable password ok 32 # skip Won't enter enabled mode without an enable password PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-Net-Telnet-Cisco.t .. 1..1 ok 1 - Loading Module ok t/02-pod-coverage.t ...... 1..1 # Running under perl version 5.040000 for linux # Current time local: Tue Nov 26 02:32:45 2024 # Current time GMT: Tue Nov 26 02:32:45 2024 # Using Test.pm version 1.31 ok 1 # skip Test::Pod::Coverage required for testing ok All tests successful. Files=2, Tests=2, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.24 cusr 0.02 csys = 0.32 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libnet-telnet-cisco-perl/ make -j3 install DESTDIR=/build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' Manifying 1 pod document Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/auto/Net/Telnet/Cisco/autosplit.ix Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/Net/Telnet/Cisco.pm Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/man/man3/Net::Telnet::Cisco.3pm make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libnet-telnet-cisco-perl' in '../libnet-telnet-cisco-perl_1.12-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo dpkg-genchanges --build=binary -O../libnet-telnet-cisco-perl_1.12-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31316 and its subdirectories I: Current time: Mon Nov 25 14:32:51 -12 2024 I: pbuilder-time-stamp: 1732588371 Tue Nov 26 02:32:51 UTC 2024 I: Signing ./b1/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo as libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc Tue Nov 26 02:32:51 UTC 2024 I: Signed ./b1/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo as ./b1/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc Tue Nov 26 02:32:51 UTC 2024 - build #1 for libnet-telnet-cisco-perl/trixie/armhf on virt64a done. Starting cleanup. All cleanup done. Tue Nov 26 02:32:51 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-jiAbmVJ7, removing. /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 26 02:32 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 26 02:31 b2 -rw-r--r-- 1 jenkins jenkins 2252 Nov 15 11:40 libnet-telnet-cisco-perl_1.12-2.dsc -rw------- 1 jenkins jenkins 3472 Nov 26 02:31 rbuildlog.ZDkqrov /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1: total 80 -rw-r--r-- 1 jenkins jenkins 23372 Nov 26 02:32 build.log -rw-r--r-- 1 jenkins jenkins 3628 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2252 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2.dsc -rw-r--r-- 1 jenkins jenkins 24184 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_all.deb -rw-r--r-- 1 jenkins jenkins 4672 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo -rw-r--r-- 1 jenkins jenkins 5554 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1182 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_armhf.changes -rw-r--r-- 1 jenkins jenkins 1351 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2: total 0 Tue Nov 26 02:32:55 UTC 2024 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Nov 25 14:31:51 -12 2024 I: pbuilder-time-stamp: 1732588311 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libnet-telnet-cisco-perl_1.12-2.dsc] I: copying [./libnet-telnet-cisco-perl_1.12.orig.tar.gz] I: copying [./libnet-telnet-cisco-perl_1.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Nov 15 11:14:23 2024 gpgv: using RSA key AC2FBDB104943D8A44A0211D02713BCFCA5410B2 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libnet-telnet-cisco-perl_1.12-2.dsc: no acceptable signature found dpkg-source: info: extracting libnet-telnet-cisco-perl in libnet-telnet-cisco-perl-1.12 dpkg-source: info: unpacking libnet-telnet-cisco-perl_1.12.orig.tar.gz dpkg-source: info: unpacking libnet-telnet-cisco-perl_1.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01_manpage-typo.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/31316/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='3af2545f4df4465d83b199b1f897ea36' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='31316' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_JxUY --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1 --logfile b1/build.log libnet-telnet-cisco-perl_1.12-2.dsc' SUDO_GID='114' SUDO_UID='108' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64a 6.1.0-28-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/31316/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libnet-telnet-perl, libterm-readkey-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19690 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libnet-telnet-perl; however: Package libnet-telnet-perl is not installed. pbuilder-satisfydepends-dummy depends on libterm-readkey-perl; however: Package libterm-readkey-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libnet-telnet-perl{a} libpipeline1{a} libterm-readkey-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 19.2 MB of archives. After unpacking 70.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3+b1 [98.5 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3+b1 [42.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.22.5-2 [195 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b2 [65.6 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-5 [1091 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.2-11 [83.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.8-1 [35.0 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.13.0-1 [1382 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.192-4 [184 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-5+b1 [9088 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.12.7+dfsg+really2.9.14-0.2+b1 [605 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.22.5-2 [1485 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libnet-telnet-perl all 3.05-2 [56.5 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libterm-readkey-perl armhf 2.38-2+b4 [23.7 kB] Fetched 19.2 MB in 1s (33.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19690 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_armhf.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_armhf.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_armhf.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_armhf.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.8-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_armhf.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../21-libelf1t64_0.192-4_armhf.deb ... Unpacking libelf1t64:armhf (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../23-libicu72_72.1-5+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-5+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_armhf.deb ... Unpacking libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_armhf.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libnet-telnet-perl. Preparing to unpack .../29-libnet-telnet-perl_3.05-2_all.deb ... Unpacking libnet-telnet-perl (3.05-2) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../30-libterm-readkey-perl_2.38-2+b4_armhf.deb ... Unpacking libterm-readkey-perl (2.38-2+b4) ... Setting up libpipeline1:armhf (1.5.8-1) ... Setting up libicu72:armhf (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:armhf (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up libnet-telnet-perl (3.05-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:armhf (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b2) ... Setting up libterm-readkey-perl (2.38-2+b4) ... Setting up libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libnet-telnet-cisco-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libnet-telnet-cisco-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libnet-telnet-cisco-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Roland Rosenfeld dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-telnet-cisco-perl-1.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-telnet-cisco-perl-1.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Net::Telnet::Cisco Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' cp lib/Net/Telnet/Cisco.pm blib/lib/Net/Telnet/Cisco.pm AutoSplitting blib/lib/Net/Telnet/Cisco.pm (blib/lib/auto/Net/Telnet/Cisco) Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl 1..32 ok 1 - use Net::Telnet::Cisco; Net::Telnet::Cisco needs to log into a router to perform it's full suite of tests. To log in, we need a test router, a login, a password, an optional enable password, and an optional SecurID/TACACS PASSCODE. To skip these tests, hit "return". Router: ok 2 - $VERSION set ok 3 # skip Won't login to router without a login and password. ok 4 # skip Won't login to router without a login and password. ok 5 # skip Won't login to router without a login and password. ok 6 # skip Won't login to router without a login and password. ok 7 # skip Won't login to router without a login and password. ok 8 # skip Won't login to router without a login and password. ok 9 # skip Won't login to router without a login and password. ok 10 # skip Won't login to router without a login and password. ok 11 # skip Won't login to router without a login and password. ok 12 # skip Won't login to router without a login and password. ok 13 # skip Won't login to router without a login and password. ok 14 # skip Won't login to router without a login and password. ok 15 # skip Won't login to router without a login and password. ok 16 # skip Won't login to router without a login and password. ok 17 # skip Won't login to router without a login and password. ok 18 # skip Won't login to router without a login and password. ok 19 # skip Won't login to router without a login and password. ok 20 # skip Won't login to router without a login and password. ok 21 # skip Won't login to router without a login and password. ok 22 # skip Won't login to router without a login and password. ok 23 # skip Won't login to router without a login and password. ok 24 # skip Won't login to router without a login and password. ok 25 # skip Won't login to router without a login and password. ok 26 # skip Won't login to router without a login and password. ok 27 # skip Won't login to router without a login and password. ok 28 # skip Won't login to router without a login and password. ok 29 # skip Won't login to router without a login and password. ok 30 # skip Won't enter enabled mode without an enable password ok 31 # skip Won't enter enabled mode without an enable password ok 32 # skip Won't enter enabled mode without an enable password PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-Net-Telnet-Cisco.t .. 1..1 ok 1 - Loading Module ok t/02-pod-coverage.t ...... 1..1 # Running under perl version 5.040000 for linux # Current time local: Tue Nov 26 02:32:45 2024 # Current time GMT: Tue Nov 26 02:32:45 2024 # Using Test.pm version 1.31 ok 1 # skip Test::Pod::Coverage required for testing ok All tests successful. Files=2, Tests=2, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.24 cusr 0.02 csys = 0.32 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libnet-telnet-cisco-perl/ make -j3 install DESTDIR=/build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' Manifying 1 pod document Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/auto/Net/Telnet/Cisco/autosplit.ix Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/Net/Telnet/Cisco.pm Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/man/man3/Net::Telnet::Cisco.3pm make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libnet-telnet-cisco-perl' in '../libnet-telnet-cisco-perl_1.12-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo dpkg-genchanges --build=binary -O../libnet-telnet-cisco-perl_1.12-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31316 and its subdirectories I: Current time: Mon Nov 25 14:32:51 -12 2024 I: pbuilder-time-stamp: 1732588371 Tue Nov 26 02:32:58 UTC 2024 I: 1st build successful. Starting 2nd build on remote node virt32c-armhf-rb.debian.net. Tue Nov 26 02:32:58 UTC 2024 I: Preparing to do remote build '2' on virt32c-armhf-rb.debian.net. Tue Nov 26 02:32:58 UTC 2024 - checking /var/lib/jenkins/offline_nodes if virt32c-armhf-rb.debian.net is marked as down. Tue Nov 26 02:32:58 UTC 2024 - checking via ssh if virt32c-armhf-rb.debian.net is up. removed '/tmp/read-only-fs-test-OIMp4n' ==================================================================================== Tue Nov 26 02:33:02 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on virt32c, called using "2 libnet-telnet-cisco-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n 1.12-2" as arguments. Tue Nov 26 02:33:02 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-nWxCsD29" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Nov 26 02:33:02 UTC 2024 I: Downloading source for trixie/libnet-telnet-cisco-perl=1.12-2 Reading package lists... NOTICE: 'libnet-telnet-cisco-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.2 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (dsc) [2252 B] Get:2 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (tar) [19.3 kB] Get:3 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (diff) [3628 B] Fetched 25.2 kB in 0s (956 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libnet-telnet-cisco-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libnet-telnet-cisco-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 25.2 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (dsc) [2252 B] Get:2 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (tar) [19.3 kB] Get:3 http://deb.debian.org/debian trixie/main libnet-telnet-cisco-perl 1.12-2 (diff) [3628 B] Fetched 25.2 kB in 0s (956 kB/s) Download complete and in download only mode ============================================================================= Re-Building libnet-telnet-cisco-perl in trixie on armhf on virt32c now. Date: Mon Nov 25 18:33:03 PST 2024 Date UTC: Tue Nov 26 02:33:03 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_CoCI + case ${ARCH} in + case $NUM_CPU in + case $ARCH in + locale=it_CH + language=it + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libnet-telnet-cisco-perl = debian-installer -o libnet-telnet-cisco-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libnet-telnet-cisco-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_CoCI --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2 --logfile b2/build.log libnet-telnet-cisco-perl_1.12-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue Nov 26 16:33:03 +14 2024 I: pbuilder-time-stamp: 1732588383 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libnet-telnet-cisco-perl_1.12-2.dsc] I: copying [./libnet-telnet-cisco-perl_1.12.orig.tar.gz] I: copying [./libnet-telnet-cisco-perl_1.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Nov 15 11:14:23 2024 gpgv: using RSA key AC2FBDB104943D8A44A0211D02713BCFCA5410B2 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libnet-telnet-cisco-perl_1.12-2.dsc: no acceptable signature found dpkg-source: info: extracting libnet-telnet-cisco-perl in libnet-telnet-cisco-perl-1.12 dpkg-source: info: unpacking libnet-telnet-cisco-perl_1.12.orig.tar.gz dpkg-source: info: unpacking libnet-telnet-cisco-perl_1.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01_manpage-typo.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D01_modify_environment starting debug: Running on virt32c. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 26 02:33 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="arm-unknown-linux-gnueabihf") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=armhf DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=4 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=arm HOST_ARCH=armhf IFS=' ' INVOCATION_ID=4fb4df9b66aa4c889ed7ffa9d0e52f63 LANG=C LANGUAGE=it_CH:it LC_ALL=C MACHTYPE=arm-unknown-linux-gnueabihf MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnueabihf PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=23061 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_CoCI --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2 --logfile b2/build.log libnet-telnet-cisco-perl_1.12-2.dsc' SUDO_GID=113 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://10.0.0.15:3142/ I: uname -a Linux i-capture-the-hostname 6.1.0-28-armmp-lpae #1 SMP Debian 6.1.119-1 (2024-11-22) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libnet-telnet-perl, libterm-readkey-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19690 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libnet-telnet-perl; however: Package libnet-telnet-perl is not installed. pbuilder-satisfydepends-dummy depends on libterm-readkey-perl; however: Package libterm-readkey-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libnet-telnet-perl{a} libpipeline1{a} libterm-readkey-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 19.2 MB of archives. After unpacking 70.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3+b1 [98.5 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3+b1 [42.3 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.22.5-2 [195 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b2 [65.6 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-5 [1091 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.2-11 [83.6 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.8-1 [35.0 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.13.0-1 [1382 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-4 [264 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.192-4 [184 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-5+b1 [9088 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.12.7+dfsg+really2.9.14-0.2+b1 [605 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.22.5-2 [1485 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libnet-telnet-perl all 3.05-2 [56.5 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libterm-readkey-perl armhf 2.38-2+b4 [23.7 kB] Fetched 19.2 MB in 1s (38.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19690 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_armhf.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_armhf.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_armhf.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_armhf.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.8-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_armhf.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../21-libelf1t64_0.192-4_armhf.deb ... Unpacking libelf1t64:armhf (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../23-libicu72_72.1-5+b1_armhf.deb ... Unpacking libicu72:armhf (72.1-5+b1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_armhf.deb ... Unpacking libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_armhf.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libnet-telnet-perl. Preparing to unpack .../29-libnet-telnet-perl_3.05-2_all.deb ... Unpacking libnet-telnet-perl (3.05-2) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../30-libterm-readkey-perl_2.38-2+b4_armhf.deb ... Unpacking libterm-readkey-perl (2.38-2+b4) ... Setting up libpipeline1:armhf (1.5.8-1) ... Setting up libicu72:armhf (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:armhf (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up libnet-telnet-perl (3.05-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:armhf (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b2) ... Setting up libterm-readkey-perl (2.38-2+b4) ... Setting up libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/23061/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/23061/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libnet-telnet-cisco-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libnet-telnet-cisco-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libnet-telnet-cisco-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Roland Rosenfeld dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-telnet-cisco-perl-1.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-telnet-cisco-perl-1.12=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Net::Telnet::Cisco Writing MYMETA.yml and MYMETA.json dh_auto_build make -j4 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' cp lib/Net/Telnet/Cisco.pm blib/lib/Net/Telnet/Cisco.pm AutoSplitting blib/lib/Net/Telnet/Cisco.pm (blib/lib/auto/Net/Telnet/Cisco) Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_auto_test make -j4 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl 1..32 ok 1 - use Net::Telnet::Cisco; Net::Telnet::Cisco needs to log into a router to perform it's full suite of tests. To log in, we need a test router, a login, a password, an optional enable password, and an optional SecurID/TACACS PASSCODE. To skip these tests, hit "return". Router: ok 2 - $VERSION set ok 3 # skip Won't login to router without a login and password. ok 4 # skip Won't login to router without a login and password. ok 5 # skip Won't login to router without a login and password. ok 6 # skip Won't login to router without a login and password. ok 7 # skip Won't login to router without a login and password. ok 8 # skip Won't login to router without a login and password. ok 9 # skip Won't login to router without a login and password. ok 10 # skip Won't login to router without a login and password. ok 11 # skip Won't login to router without a login and password. ok 12 # skip Won't login to router without a login and password. ok 13 # skip Won't login to router without a login and password. ok 14 # skip Won't login to router without a login and password. ok 15 # skip Won't login to router without a login and password. ok 16 # skip Won't login to router without a login and password. ok 17 # skip Won't login to router without a login and password. ok 18 # skip Won't login to router without a login and password. ok 19 # skip Won't login to router without a login and password. ok 20 # skip Won't login to router without a login and password. ok 21 # skip Won't login to router without a login and password. ok 22 # skip Won't login to router without a login and password. ok 23 # skip Won't login to router without a login and password. ok 24 # skip Won't login to router without a login and password. ok 25 # skip Won't login to router without a login and password. ok 26 # skip Won't login to router without a login and password. ok 27 # skip Won't login to router without a login and password. ok 28 # skip Won't login to router without a login and password. ok 29 # skip Won't login to router without a login and password. ok 30 # skip Won't enter enabled mode without an enable password ok 31 # skip Won't enter enabled mode without an enable password ok 32 # skip Won't enter enabled mode without an enable password PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-Net-Telnet-Cisco.t .. 1..1 ok 1 - Loading Module ok t/02-pod-coverage.t ...... 1..1 # Running under perl version 5.040000 for linux # Current time local: Tue Nov 26 02:34:13 2024 # Current time GMT: Tue Nov 26 02:34:13 2024 # Using Test.pm version 1.31 ok 1 # skip Test::Pod::Coverage required for testing ok All tests successful. Files=2, Tests=2, 0 wallclock secs ( 0.07 usr 0.00 sys + 0.24 cusr 0.06 csys = 0.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libnet-telnet-cisco-perl/ make -j4 install DESTDIR=/build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' Manifying 1 pod document Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/auto/Net/Telnet/Cisco/autosplit.ix Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/Net/Telnet/Cisco.pm Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/man/man3/Net::Telnet::Cisco.3pm make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libnet-telnet-cisco-perl' in '../libnet-telnet-cisco-perl_1.12-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo dpkg-genchanges --build=binary -O../libnet-telnet-cisco-perl_1.12-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/23061/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/23061/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/23061 and its subdirectories I: Current time: Tue Nov 26 16:34:21 +14 2024 I: pbuilder-time-stamp: 1732588461 + false + set +x Tue Nov 26 02:34:21 UTC 2024 I: Signing ./b2/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo as libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc Tue Nov 26 02:34:21 UTC 2024 I: Signed ./b2/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo as ./b2/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc Tue Nov 26 02:34:21 UTC 2024 - build #2 for libnet-telnet-cisco-perl/trixie/armhf on virt32c done. Starting cleanup. All cleanup done. Tue Nov 26 02:34:21 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-nWxCsD29, removing. /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Nov 26 02:32 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 26 02:34 b2 -rw-r--r-- 1 jenkins jenkins 2252 Nov 15 11:40 libnet-telnet-cisco-perl_1.12-2.dsc -rw------- 1 jenkins jenkins 27142 Nov 26 02:32 rbuildlog.ZDkqrov /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1: total 80 -rw-r--r-- 1 jenkins jenkins 23372 Nov 26 02:32 build.log -rw-r--r-- 1 jenkins jenkins 3628 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2252 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2.dsc -rw-r--r-- 1 jenkins jenkins 24184 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_all.deb -rw-r--r-- 1 jenkins jenkins 4672 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo -rw-r--r-- 1 jenkins jenkins 5554 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1182 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_armhf.changes -rw-r--r-- 1 jenkins jenkins 1351 Nov 26 02:32 libnet-telnet-cisco-perl_1.12-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2: total 84 -rw-r--r-- 1 jenkins jenkins 25313 Nov 26 02:34 build.log -rw-r--r-- 1 jenkins jenkins 3628 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2252 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2.dsc -rw-r--r-- 1 jenkins jenkins 24184 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2_all.deb -rw-r--r-- 1 jenkins jenkins 4677 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo -rw-r--r-- 1 jenkins jenkins 5559 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1182 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2_armhf.changes -rw-r--r-- 1 jenkins jenkins 1351 Nov 26 02:34 libnet-telnet-cisco-perl_1.12-2_source.changes Tue Nov 26 02:34:25 UTC 2024 I: Deleting $TMPDIR on virt32c-armhf-rb.debian.net. Tue Nov 26 02:34:28 UTC 2024 I: libnet-telnet-cisco-perl_1.12-2_armhf.changes: Format: 1.8 Date: Fri, 15 Nov 2024 12:07:16 +0100 Source: libnet-telnet-cisco-perl Binary: libnet-telnet-cisco-perl Architecture: all Version: 1.12-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Roland Rosenfeld Description: libnet-telnet-cisco-perl - Additional functionality to automate Cisco management Changes: libnet-telnet-cisco-perl (1.12-2) unstable; urgency=medium . * Source only upload for migration to testing. Checksums-Sha1: 9eeb93613ca726c4164dd9ae2ec1a0389adfd1fe 24184 libnet-telnet-cisco-perl_1.12-2_all.deb ba56755e16abf34b2d9db30322cf7d4a48b695bf 4672 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo Checksums-Sha256: 603c3b6a90aaa4dd5b767cfaccefd81e9232f2387ed310703e6db10315e2ad07 24184 libnet-telnet-cisco-perl_1.12-2_all.deb e9527a66293e4cf0c8e779e1d469eccbb9df8b5b2fb1d451b91f39a12c8bef32 4672 libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo Files: 57ac98e382af1c97fc76ad21add1d7d0 24184 perl optional libnet-telnet-cisco-perl_1.12-2_all.deb 6d96ff2e1b261b8e5f5bf3c0aa1f0f61 4672 perl optional libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo Diff of the two buildlogs: -- --- b1/build.log 2024-11-26 02:32:55.091489701 +0000 +++ b2/build.log 2024-11-26 02:34:24.991430590 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Mon Nov 25 14:31:51 -12 2024 -I: pbuilder-time-stamp: 1732588311 +I: Current time: Tue Nov 26 16:33:03 +14 2024 +I: pbuilder-time-stamp: 1732588383 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -27,52 +27,84 @@ dpkg-source: info: applying 01_manpage-typo.patch I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/31316/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D01_modify_environment starting +debug: Running on virt32c. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 26 02:33 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='armhf' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='armhf' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="arm-unknown-linux-gnueabihf") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=armhf + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=4 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=arm + HOST_ARCH=armhf IFS=' ' - INVOCATION_ID='3af2545f4df4465d83b199b1f897ea36' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='31316' - PS1='# ' - PS2='> ' + INVOCATION_ID=4fb4df9b66aa4c889ed7ffa9d0e52f63 + LANG=C + LANGUAGE=it_CH:it + LC_ALL=C + MACHTYPE=arm-unknown-linux-gnueabihf + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnueabihf + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=23061 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_JxUY --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1 --logfile b1/build.log libnet-telnet-cisco-perl_1.12-2.dsc' - SUDO_GID='114' - SUDO_UID='108' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://10.0.0.15:3142/' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/pbuilderrc_CoCI --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2 --logfile b2/build.log libnet-telnet-cisco-perl_1.12-2.dsc' + SUDO_GID=113 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://10.0.0.15:3142/ I: uname -a - Linux virt64a 6.1.0-28-arm64 #1 SMP Debian 6.1.119-1 (2024-11-22) aarch64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-28-armmp-lpae #1 SMP Debian 6.1.119-1 (2024-11-22) armv7l GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/31316/tmp/hooks/D02_print_environment finished +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -143,7 +175,7 @@ Get: 29 http://deb.debian.org/debian trixie/main armhf debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf libnet-telnet-perl all 3.05-2 [56.5 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libterm-readkey-perl armhf 2.38-2+b4 [23.7 kB] -Fetched 19.2 MB in 1s (33.9 MB/s) +Fetched 19.2 MB in 1s (38.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19690 files and directories currently installed.) @@ -282,7 +314,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libnet-telnet-cisco-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libnet-telnet-cisco-perl_1.12-2_source.changes +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libnet-telnet-cisco-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libnet-telnet-cisco-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libnet-telnet-cisco-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable @@ -304,14 +340,14 @@ Writing Makefile for Net::Telnet::Cisco Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j3 + make -j4 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' cp lib/Net/Telnet/Cisco.pm blib/lib/Net/Telnet/Cisco.pm AutoSplitting blib/lib/Net/Telnet/Cisco.pm (blib/lib/auto/Net/Telnet/Cisco) Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' dh_auto_test - make -j3 test TEST_VERBOSE=1 + make -j4 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl 1..32 @@ -365,19 +401,19 @@ t/02-pod-coverage.t ...... 1..1 # Running under perl version 5.040000 for linux -# Current time local: Tue Nov 26 02:32:45 2024 -# Current time GMT: Tue Nov 26 02:32:45 2024 +# Current time local: Tue Nov 26 02:34:13 2024 +# Current time GMT: Tue Nov 26 02:34:13 2024 # Using Test.pm version 1.31 ok 1 # skip Test::Pod::Coverage required for testing ok All tests successful. -Files=2, Tests=2, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.24 cusr 0.02 csys = 0.32 CPU) +Files=2, Tests=2, 0 wallclock secs ( 0.07 usr 0.00 sys + 0.24 cusr 0.06 csys = 0.37 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libnet-telnet-cisco-perl/ - make -j3 install DESTDIR=/build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j4 install DESTDIR=/build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libnet-telnet-cisco-perl-1.12' Manifying 1 pod document Installing /build/reproducible-path/libnet-telnet-cisco-perl-1.12/debian/libnet-telnet-cisco-perl/usr/share/perl5/auto/Net/Telnet/Cisco/autosplit.ix @@ -405,12 +441,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/23061/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/31316 and its subdirectories -I: Current time: Mon Nov 25 14:32:51 -12 2024 -I: pbuilder-time-stamp: 1732588371 +I: removing directory /srv/workspace/pbuilder/23061 and its subdirectories +I: Current time: Tue Nov 26 16:34:21 +14 2024 +I: pbuilder-time-stamp: 1732588461 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/armhf/libnet-telnet-cisco-perl_1.12-2.diff: 67.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/armhf/libnet-telnet-cisco-perl_1.12-2.diff.gz b2/build.log: 74.3% -- replaced with stdout Compressing the 1st log... b1/build.log: 75.0% -- replaced with stdout Tue Nov 26 02:34:29 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libnet-telnet-cisco-perl_trixie_armhf_1732588469 + touch /var/log/reproducible-builds/diffoscope_stamp_libnet-telnet-cisco-perl_trixie_armhf_1732588469 + RESULT=0 + systemd-run '--description=diffoscope on libnet-telnet-cisco-perl/1.12-2 in trixie/armhf' --slice=rb-build-diffoscope.slice -u rb-diffoscope-armhf_8-11701 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n --run-session -c jenkins-reproducible-trixie-diffoscope-dfce0e58-a793-41e4-9970-a1eaec29716e -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/dbd-tmp-RtpirMY ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/libnet-telnet-cisco-perl_1.12-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/libnet-telnet-cisco-perl_1.12-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/libnet-telnet-cisco-perl_1.12-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1/libnet-telnet-cisco-perl_1.12-2_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2/libnet-telnet-cisco-perl_1.12-2_armhf.changes' + false + set +x Running as unit: rb-diffoscope-armhf_8-11701.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/libnet-telnet-cisco-perl_1.12-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/libnet-telnet-cisco-perl_1.12-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/libnet-telnet-cisco-perl_1.12-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b1/libnet-telnet-cisco-perl_1.12-2_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.hqV7836n/b2/libnet-telnet-cisco-perl_1.12-2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.349s) 0.349s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.013s) 0.013s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 700ms CPU time consumed: 692ms _ _ _ _ _ _ _ _ | (_) |__ _ __ ___| |_ | |_ ___| |_ __ ___| |_ ___(_)___ ___ | | | '_ \| '_ \ / _ \ __|____| __/ _ \ | '_ \ / _ \ __|____ / __| / __|/ __| | | | |_) | | | | __/ ||_____| || __/ | | | | __/ ||_____| (__| \__ \ (__ |_|_|_.__/|_| |_|\___|\__| \__\___|_|_| |_|\___|\__| \___|_|___/\___| _ ___ _ __ ___ _ __| | / _ \ _____| '_ \ / _ \ '__| | | (_) |_____| |_) | __/ | | | \___/ | .__/ \___|_| |_| |_| Tue Nov 26 02:50:04 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Tue Nov 26 02:50:04 UTC 2024 I: libnet-telnet-cisco-perl from trixie built successfully and reproducibly on armhf. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-26 02:50:06] INFO: Starting at 2024-11-26 02:50:06.253557 [2024-11-26 02:50:06] INFO: Generating the pages of 1 package(s) [2024-11-26 02:50:07] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/armhf/libnet-telnet-cisco-perl didn't produce a buildlog, even though it has been built. [2024-11-26 02:50:07] INFO: Finished at 2024-11-26 02:50:07.127022, took: 0:00:00.877801 Tue Nov 26 02:50:07 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/armhf/libnet-telnet-cisco-perl.html Tue Nov 26 02:50:07 UTC 2024 I: Submitting .buildinfo files to external archives: Tue Nov 26 02:50:07 UTC 2024 I: Submitting 8.0K b1/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc https://buildinfo.debian.net/ba56755e16abf34b2d9db30322cf7d4a48b695bf/libnet-telnet-cisco-perl_1.12-2_all Tue Nov 26 02:50:20 UTC 2024 I: Submitting 8.0K b2/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc Tue Nov 26 02:50:50 UTC 2024 E: Could not submit buildinfo from b2 to http://buildinfo.debian.net/api/submit Tue Nov 26 02:50:50 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Nov 26 02:50:50 UTC 2024 I: Done submitting .buildinfo files. Tue Nov 26 02:50:50 UTC 2024 I: Removing signed libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc files: removed './b1/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc' removed './b2/libnet-telnet-cisco-perl_1.12-2_armhf.buildinfo.asc' 1732589450 armhf trixie libnet-telnet-cisco-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/armhf/libnet-telnet-cisco-perl_1.12-2.rbuild.log: 72.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/armhf/libnet-telnet-cisco-perl_1.12-2.rbuild.log.gz [2024-11-26 02:50:50] INFO: Starting at 2024-11-26 02:50:50.559383 [2024-11-26 02:50:50] INFO: Generating the pages of 1 package(s) [2024-11-26 02:50:50] INFO: Finished at 2024-11-26 02:50:50.731492, took: 0:00:00.172116 All cleanup done. Tue Nov 26 02:50:50 UTC 2024 - total duration: 0h 18m 43s. Tue Nov 26 02:50:50 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-OxZYIVXE, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 19min 29.730s CPU time consumed: 7.371s