Running as unit: rb-build-i386_10-49581.service ==================================================================================== Wed Apr 2 09:52:14 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_10) on jenkins, called using "ionos16-i386 ionos2-i386" as arguments. Wed Apr 2 09:52:14 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-w6uTht3u" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Apr 2 09:52:14 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Wed Apr 2 09:52:14 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-CXsrtr' Wed Apr 2 09:52:15 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Wed Apr 2 09:52:15 UTC 2025 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-WxafmJ' ok, let's check if libdevice-serialport-perl is building anywhere yet… ok, libdevice-serialport-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libdevice-serialport-perl in trixie on i386 on jenkins now. 1st build will be done on ionos16-i386.debian.net. 2nd build will be done on ionos2-i386.debian.net. ============================================================================= Wed Apr 2 09:52:31 UTC 2025 I: starting to build libdevice-serialport-perl/trixie/i386 on jenkins on '2025-04-02 09:52' Wed Apr 2 09:52:31 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_10/49581/console.log 1743587551 i386 trixie libdevice-serialport-perl Wed Apr 2 09:52:31 UTC 2025 I: Downloading source for trixie/libdevice-serialport-perl=1.04-4 --2025-04-02 09:52:32-- http://deb.debian.org/debian/pool/main/libd/libdevice-serialport-perl/libdevice-serialport-perl_1.04-4.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2211 (2.2K) [text/prs.lines.tag] Saving to: ‘libdevice-serialport-perl_1.04-4.dsc’ 0K .. 100% 325M=0s 2025-04-02 09:52:32 (325 MB/s) - ‘libdevice-serialport-perl_1.04-4.dsc’ saved [2211/2211] --2025-04-02 09:52:32-- http://deb.debian.org/debian/pool/main/libd/libdevice-serialport-perl/libdevice-serialport-perl_1.04-4.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2211 (2.2K) [text/prs.lines.tag] Saving to: ‘libdevice-serialport-perl_1.04-4.dsc’ 0K .. 100% 325M=0s 2025-04-02 09:52:32 (325 MB/s) - ‘libdevice-serialport-perl_1.04-4.dsc’ saved [2211/2211] Wed Apr 2 09:52:32 UTC 2025 I: libdevice-serialport-perl_1.04-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdevice-serialport-perl Binary: libdevice-serialport-perl Architecture: any Version: 1.04-4 Maintainer: Debian Perl Group Uploaders: Mike Mattice , Damyan Ivanov Homepage: https://metacpan.org/release/Device-SerialPort Standards-Version: 3.9.5 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 10~), perl-xs-dev, perl:native Package-List: libdevice-serialport-perl deb perl optional arch=any Checksums-Sha1: c2e34c4cbbf3bc578c5b7fd2790906bc0a5d4cf0 98706 libdevice-serialport-perl_1.04.orig.tar.gz f41a6d8315bc7ed1a062f22b221078de5ba64816 5032 libdevice-serialport-perl_1.04-4.debian.tar.xz Checksums-Sha256: d392567cb39b4ea606c0e0acafd8ed72320311b995336ece5fcefcf9b150e9d7 98706 libdevice-serialport-perl_1.04.orig.tar.gz 29b857b9317213d785e607422f490ef6af736e2699d7b6808910acfa591b20a1 5032 libdevice-serialport-perl_1.04-4.debian.tar.xz Files: 82c698151f934eb28c65d1838cee7d9e 98706 libdevice-serialport-perl_1.04.orig.tar.gz 4e13426410aa062796406b275ada2d83 5032 libdevice-serialport-perl_1.04-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKnVpwACgkQV5wWDUye I+hm3Q//clI5vL7+1QTpjookY2QxrPjqinF3kjNE3NVfRtujAel+vGJlh321j70H ixOl/y657Y5OOsI9zxPV5D+G950q6m8TqNex8oWXouFFkxz9fz1p1qfS+xLxl5dZ IYEZM82PAgqEYej+10TUIq95Zxa5FvScyT/vLSi4SqZwc4QleK4Uo7mcDkVSvlbn 3B2M+T8P86BzlROjSKT0RNe3GalfjdE4L7Snn7LFLJdpUnO+1LCGMAQmFPtqKG5P Q553aCQKhPqbZYE7ZlBFAWhz/wkd7gsE4S7/TGhDBoKZIT5hsc/E8LeA1zbwmSzr /UWJMJgaSC3ezXvlo5EoIsKVp9WHWUoILTMM0jXVflUYml9I1qxLtDfwq/HrhdBH lqDqMX5n5MX3XBbzrpbBrGvdy0j2GDYKPyyN0nOSmjHXRe6HeLfym5xMZE0oq7x5 Y5d1Z38gZ0UcP9qGy0ct56BLCVs1D5fj6XzZlPmuzwPutmbMCiP0IClCdxZ1ymtl bdBN35XZcMAjubWefl+Y7QRiHseyIRMa1/+pBXB1rmeBz8h7o9nhhx5XsZ7YHFhf C+5vrWDolh8VvnDtJ9UqWAj6ZYKDRzAayftla4eUdvK3JPyeZvFYLiqbBULcEYNr F3ZHKQtk9yGQ+UtKQVA7z8p5tjplDQ6OsLJRy33s00Plbq0ZQCI= =hcN5 -----END PGP SIGNATURE----- Wed Apr 2 09:52:32 UTC 2025 I: Checking whether the package is not for us Wed Apr 2 09:52:32 UTC 2025 I: Starting 1st build on remote node ionos16-i386.debian.net. Wed Apr 2 09:52:32 UTC 2025 I: Preparing to do remote build '1' on ionos16-i386.debian.net. Wed Apr 2 09:52:32 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Wed Apr 2 09:52:32 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-jfOw1v' ==================================================================================== Tue May 5 16:15:31 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos16-i386, called using "1 libdevice-serialport-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u 1.04-4" as arguments. Tue May 5 16:15:31 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-I1e34BAD" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue May 5 16:15:31 UTC 2026 I: Downloading source for trixie/libdevice-serialport-perl=1.04-4 Reading package lists... NOTICE: 'libdevice-serialport-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 106 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (dsc) [2211 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (tar) [98.7 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (diff) [5032 B] Fetched 106 kB in 0s (1862 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdevice-serialport-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 106 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (dsc) [2211 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (tar) [98.7 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (diff) [5032 B] Fetched 106 kB in 0s (1862 kB/s) Download complete and in download only mode ============================================================================= Building libdevice-serialport-perl in trixie on i386 on ionos16-i386 now. Date: Tue May 5 18:15:32 CEST 2026 Date UTC: Tue May 5 16:15:32 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue May 5 04:15:32 -12 2026 I: pbuilder-time-stamp: 1777997732 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdevice-serialport-perl_1.04-4.dsc] I: copying [./libdevice-serialport-perl_1.04.orig.tar.gz] I: copying [./libdevice-serialport-perl_1.04-4.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdevice-serialport-perl_1.04-4.dsc: unsupported subcommand dpkg-source: info: extracting libdevice-serialport-perl in libdevice-serialport-perl-1.04 dpkg-source: info: unpacking libdevice-serialport-perl_1.04.orig.tar.gz dpkg-source: info: unpacking libdevice-serialport-perl_1.04-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying pod.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/122605/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='6939e7af26174d30bae58b2a4ca11c52' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='122605' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_8PrO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1 --logfile b1/build.log libdevice-serialport-perl_1.04-4.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/122605/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10~), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 12.5 MB of archives. After unpacking 45.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-5 [96.5 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-2 [1220 kB] Fetched 12.5 MB in 2s (7201 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_i386.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../29-libperl-dev_5.40.1-2_i386.deb ... Unpacking libperl-dev:i386 (5.40.1-2) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:i386 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libdevice-serialport-perl-1.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevice-serialport-perl_1.04-4_source.changes dpkg-buildpackage: info: source package libdevice-serialport-perl dpkg-buildpackage: info: source version 1.04-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean --buildsystem=perl_makemaker dh_auto_clean -O--buildsystem=perl_makemaker dh_autoreconf_clean -O--buildsystem=perl_makemaker dh_clean -O--buildsystem=perl_makemaker debian/rules binary dh binary --buildsystem=perl_makemaker dh_update_autotools_config -O--buildsystem=perl_makemaker dh_autoreconf -O--buildsystem=perl_makemaker configure.ac:9: warning: The macro 'AC_PROG_CC_STDC' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/c.m4:1669: AC_PROG_CC_STDC is expanded from... configure.ac:9: the top level configure.ac:10: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:10: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:10: the top level configure.ac:11: warning: The macro 'AC_ISC_POSIX' is obsolete. configure.ac:11: You should run autoupdate. ./lib/autoconf/specific.m4:732: AC_ISC_POSIX is expanded from... configure.ac:11: the top level dh_auto_configure -O--buildsystem=perl_makemaker /usr/bin/perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" To enable serial port tests, use: perl Makefile.PL TESTPORT= where is a specific port or 'auto' to autodetect. Running ./configure ... checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for library containing strerror... none required checking for sys/ioctl.h... yes checking for termios.h... yes checking for sys/termiox.h... no checking for sys/termios.h... yes checking for sys/ttycom.h... no checking for sys/modem.h... no checking for IOKit/serial/ioss.h... no checking definition of _SC_CLK_TCK... found checking definition of TIOCMBIS... found checking definition of TIOCMBIC... found checking definition of TIOCMGET... found checking definition of CRTSCTS... found checking definition of OCRNL... found checking definition of ONLCR... found checking definition of ECHOKE... found checking definition of ECHOCTL... found checking definition of TIOCM_CAR... found checking definition of TIOCM_CD... found checking definition of TIOCM_RNG... found checking definition of TIOCM_RI... found checking definition of TIOCM_CTS... found checking definition of TIOCM_DSR... found checking definition of TIOCMIWAIT... found checking definition of TIOCGICOUNT... found checking definition of TIOCINQ... found checking definition of FIONREAD... found checking definition of TIOCOUTQ... found checking definition of TIOCSER_TEMT... found checking definition of TIOCM_LE... found checking definition of TIOCSERGETLSR... found checking definition of TIOCSDTR... missing checking definition of TIOCCDTR... missing checking definition of TIOCM_RTS... found checking definition of TIOCM_DTR... found checking definition of CTSXON... missing checking definition of RTSXOFF... missing checking definition of TCGETX... found checking definition of TCSETX... found checking definition of IOSSIOSPEED... missing checking definition of B0... found checking definition of B50... found checking definition of B75... found checking definition of B110... found checking definition of B134... found checking definition of B150... found checking definition of B200... found checking definition of B300... found checking definition of B600... found checking definition of B1200... found checking definition of B1800... found checking definition of B2400... found checking definition of B4800... found checking definition of B9600... found checking definition of B19200... found checking definition of B38400... found checking definition of B57600... found checking definition of B115200... found checking definition of B230400... found checking definition of B460800... found checking definition of B500000... found checking definition of B576000... found checking definition of B921600... found checking definition of B1000000... found checking definition of B1152000... found checking definition of B1500000... found checking definition of B2000000... found checking definition of B2500000... found checking definition of B3000000... found checking definition of B3500000... found checking definition of B4000000... found checking serial control via ioctl... yes checking read/write of RTS signal... yes checking read/write of DTR signal... yes checking read access to modem lines... yes checking read access to buffer status... yes checking read access to serial line status... yes checking normal CTS/RTS flow control... yes configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Device::SerialPort Writing MYMETA.yml and MYMETA.json You're ready to run 'make' now... dh_auto_build -O--buildsystem=perl_makemaker make -j22 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' Running Mkbootstrap for SerialPort () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' SerialPort.xs > SerialPort.xsc chmod 644 "SerialPort.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 cp SerialPort.pm blib/lib/Device/SerialPort.pm mv SerialPort.xsc SerialPort.c i686-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.04\" -DXS_VERSION=\"1.04\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" SerialPort.c rm -f blib/arch/auto/Device/SerialPort/SerialPort.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong SerialPort.o -o blib/arch/auto/Device/SerialPort/SerialPort.so \ \ chmod 755 blib/arch/auto/Device/SerialPort/SerialPort.so cp modemtest blib/script/modemtest "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/modemtest Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_auto_test -O--buildsystem=perl_makemaker make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01timing.t ........... 1..7 ok 1 - use Device::SerialPort; ok 2 - Device::SerialPort->can('get_tick_count') ok 3 - get_tick_count returns a number ok 4 - sleep sleeps ok 5 - get_tick_count still returns a number ok 6 - measured sleep as more than 1 second ok 7 - measured sleep as less than 2 seconds ok t/10basic.t ............ skipped: No serial port selected for use with testing t/11saved-state.t ...... skipped: No serial port selected for use with testing t/20inherited.t ........ skipped: No serial port selected for use with testing t/21inherited-state.t .. skipped: No serial port selected for use with testing All tests successful. Files=5, Tests=7, 2 wallclock secs ( 0.04 usr 0.00 sys + 0.36 cusr 0.02 csys = 0.42 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=perl_makemaker dh_prep -O--buildsystem=perl_makemaker dh_auto_install --destdir=debian/libdevice-serialport-perl/ -O--buildsystem=perl_makemaker make -j22 install DESTDIR=/build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 Manifying 1 pod document Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Device/SerialPort/SerialPort.so Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/lib/i386-linux-gnu/perl5/5.40/Device/SerialPort.pm Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/man/man1/modemtest.1p Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/man/man3/Device::SerialPort.3pm Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/bin/modemtest make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installdocs -O--buildsystem=perl_makemaker dh_installchangelogs -O--buildsystem=perl_makemaker debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installexamples sed -i -e '1s|^#! perl|#!/usr/bin/perl|' -e '1s|^#!perl|#!/usr/bin/perl|' /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/doc/libdevice-serialport-perl/examples/* make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installman -O--buildsystem=perl_makemaker dh_systemd_enable -O--buildsystem=perl_makemaker dh_installinit -O--buildsystem=perl_makemaker dh_systemd_start -O--buildsystem=perl_makemaker dh_perl -O--buildsystem=perl_makemaker dh_link -O--buildsystem=perl_makemaker dh_strip_nondeterminism -O--buildsystem=perl_makemaker dh_compress -O--buildsystem=perl_makemaker dh_fixperms -O--buildsystem=perl_makemaker dh_missing -O--buildsystem=perl_makemaker dh_strip -O--buildsystem=perl_makemaker dh_makeshlibs -O--buildsystem=perl_makemaker dh_shlibdeps -O--buildsystem=perl_makemaker dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb -O--buildsystem=perl_makemaker dh_gencontrol -O--buildsystem=perl_makemaker dh_md5sums -O--buildsystem=perl_makemaker dh_builddeb -O--buildsystem=perl_makemaker dpkg-deb: building package 'libdevice-serialport-perl' in '../libdevice-serialport-perl_1.04-4_i386.deb'. dpkg-deb: building package 'libdevice-serialport-perl-dbgsym' in '../libdevice-serialport-perl-dbgsym_1.04-4_i386.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-serialport-perl_1.04-4_i386.buildinfo dpkg-genchanges --build=binary -O../libdevice-serialport-perl_1.04-4_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/122605 and its subdirectories I: Current time: Tue May 5 04:16:08 -12 2026 I: pbuilder-time-stamp: 1777997768 Tue May 5 16:16:08 UTC 2026 I: Signing ./b1/libdevice-serialport-perl_1.04-4_i386.buildinfo as libdevice-serialport-perl_1.04-4_i386.buildinfo.asc Tue May 5 16:16:08 UTC 2026 I: Signed ./b1/libdevice-serialport-perl_1.04-4_i386.buildinfo as ./b1/libdevice-serialport-perl_1.04-4_i386.buildinfo.asc Tue May 5 16:16:08 UTC 2026 - build #1 for libdevice-serialport-perl/trixie/i386 on ionos16-i386 done. Starting cleanup. All cleanup done. Tue May 5 16:16:08 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-I1e34BAD, removing. /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 09:53 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 09:52 b2 -rw-r--r-- 1 jenkins jenkins 2211 Jun 13 2022 libdevice-serialport-perl_1.04-4.dsc -rw------- 1 jenkins jenkins 3429 Apr 2 09:52 rbuildlog.YUQrp29 /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1: total 168 -rw-r--r-- 1 jenkins jenkins 29500 Apr 2 09:53 build.log -rw-r--r-- 1 jenkins jenkins 30792 Apr 2 09:53 libdevice-serialport-perl-dbgsym_1.04-4_i386.deb -rw-r--r-- 1 jenkins jenkins 5032 Apr 2 09:53 libdevice-serialport-perl_1.04-4.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2211 Apr 2 09:53 libdevice-serialport-perl_1.04-4.dsc -rw-r--r-- 1 jenkins jenkins 4964 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5846 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2508 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.changes -rw-r--r-- 1 jenkins jenkins 69320 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.deb -rw-r--r-- 1 jenkins jenkins 2326 Apr 2 09:53 libdevice-serialport-perl_1.04-4_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2: total 0 Wed Apr 2 09:53:10 UTC 2025 I: Deleting $TMPDIR on ionos16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue May 5 04:15:32 -12 2026 I: pbuilder-time-stamp: 1777997732 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdevice-serialport-perl_1.04-4.dsc] I: copying [./libdevice-serialport-perl_1.04.orig.tar.gz] I: copying [./libdevice-serialport-perl_1.04-4.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdevice-serialport-perl_1.04-4.dsc: unsupported subcommand dpkg-source: info: extracting libdevice-serialport-perl in libdevice-serialport-perl-1.04 dpkg-source: info: unpacking libdevice-serialport-perl_1.04.orig.tar.gz dpkg-source: info: unpacking libdevice-serialport-perl_1.04-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying pod.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/122605/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='6939e7af26174d30bae58b2a4ca11c52' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='122605' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_8PrO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1 --logfile b1/build.log libdevice-serialport-perl_1.04-4.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/122605/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10~), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 12.5 MB of archives. After unpacking 45.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-5 [96.5 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-2 [1220 kB] Fetched 12.5 MB in 2s (7201 kB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_i386.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../29-libperl-dev_5.40.1-2_i386.deb ... Unpacking libperl-dev:i386 (5.40.1-2) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:i386 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/libdevice-serialport-perl-1.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevice-serialport-perl_1.04-4_source.changes dpkg-buildpackage: info: source package libdevice-serialport-perl dpkg-buildpackage: info: source version 1.04-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean --buildsystem=perl_makemaker dh_auto_clean -O--buildsystem=perl_makemaker dh_autoreconf_clean -O--buildsystem=perl_makemaker dh_clean -O--buildsystem=perl_makemaker debian/rules binary dh binary --buildsystem=perl_makemaker dh_update_autotools_config -O--buildsystem=perl_makemaker dh_autoreconf -O--buildsystem=perl_makemaker configure.ac:9: warning: The macro 'AC_PROG_CC_STDC' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/c.m4:1669: AC_PROG_CC_STDC is expanded from... configure.ac:9: the top level configure.ac:10: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:10: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:10: the top level configure.ac:11: warning: The macro 'AC_ISC_POSIX' is obsolete. configure.ac:11: You should run autoupdate. ./lib/autoconf/specific.m4:732: AC_ISC_POSIX is expanded from... configure.ac:11: the top level dh_auto_configure -O--buildsystem=perl_makemaker /usr/bin/perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" To enable serial port tests, use: perl Makefile.PL TESTPORT= where is a specific port or 'auto' to autodetect. Running ./configure ... checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for library containing strerror... none required checking for sys/ioctl.h... yes checking for termios.h... yes checking for sys/termiox.h... no checking for sys/termios.h... yes checking for sys/ttycom.h... no checking for sys/modem.h... no checking for IOKit/serial/ioss.h... no checking definition of _SC_CLK_TCK... found checking definition of TIOCMBIS... found checking definition of TIOCMBIC... found checking definition of TIOCMGET... found checking definition of CRTSCTS... found checking definition of OCRNL... found checking definition of ONLCR... found checking definition of ECHOKE... found checking definition of ECHOCTL... found checking definition of TIOCM_CAR... found checking definition of TIOCM_CD... found checking definition of TIOCM_RNG... found checking definition of TIOCM_RI... found checking definition of TIOCM_CTS... found checking definition of TIOCM_DSR... found checking definition of TIOCMIWAIT... found checking definition of TIOCGICOUNT... found checking definition of TIOCINQ... found checking definition of FIONREAD... found checking definition of TIOCOUTQ... found checking definition of TIOCSER_TEMT... found checking definition of TIOCM_LE... found checking definition of TIOCSERGETLSR... found checking definition of TIOCSDTR... missing checking definition of TIOCCDTR... missing checking definition of TIOCM_RTS... found checking definition of TIOCM_DTR... found checking definition of CTSXON... missing checking definition of RTSXOFF... missing checking definition of TCGETX... found checking definition of TCSETX... found checking definition of IOSSIOSPEED... missing checking definition of B0... found checking definition of B50... found checking definition of B75... found checking definition of B110... found checking definition of B134... found checking definition of B150... found checking definition of B200... found checking definition of B300... found checking definition of B600... found checking definition of B1200... found checking definition of B1800... found checking definition of B2400... found checking definition of B4800... found checking definition of B9600... found checking definition of B19200... found checking definition of B38400... found checking definition of B57600... found checking definition of B115200... found checking definition of B230400... found checking definition of B460800... found checking definition of B500000... found checking definition of B576000... found checking definition of B921600... found checking definition of B1000000... found checking definition of B1152000... found checking definition of B1500000... found checking definition of B2000000... found checking definition of B2500000... found checking definition of B3000000... found checking definition of B3500000... found checking definition of B4000000... found checking serial control via ioctl... yes checking read/write of RTS signal... yes checking read/write of DTR signal... yes checking read access to modem lines... yes checking read access to buffer status... yes checking read access to serial line status... yes checking normal CTS/RTS flow control... yes configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Device::SerialPort Writing MYMETA.yml and MYMETA.json You're ready to run 'make' now... dh_auto_build -O--buildsystem=perl_makemaker make -j22 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' Running Mkbootstrap for SerialPort () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' SerialPort.xs > SerialPort.xsc chmod 644 "SerialPort.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 cp SerialPort.pm blib/lib/Device/SerialPort.pm mv SerialPort.xsc SerialPort.c i686-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.04\" -DXS_VERSION=\"1.04\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" SerialPort.c rm -f blib/arch/auto/Device/SerialPort/SerialPort.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong SerialPort.o -o blib/arch/auto/Device/SerialPort/SerialPort.so \ \ chmod 755 blib/arch/auto/Device/SerialPort/SerialPort.so cp modemtest blib/script/modemtest "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/modemtest Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_auto_test -O--buildsystem=perl_makemaker make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01timing.t ........... 1..7 ok 1 - use Device::SerialPort; ok 2 - Device::SerialPort->can('get_tick_count') ok 3 - get_tick_count returns a number ok 4 - sleep sleeps ok 5 - get_tick_count still returns a number ok 6 - measured sleep as more than 1 second ok 7 - measured sleep as less than 2 seconds ok t/10basic.t ............ skipped: No serial port selected for use with testing t/11saved-state.t ...... skipped: No serial port selected for use with testing t/20inherited.t ........ skipped: No serial port selected for use with testing t/21inherited-state.t .. skipped: No serial port selected for use with testing All tests successful. Files=5, Tests=7, 2 wallclock secs ( 0.04 usr 0.00 sys + 0.36 cusr 0.02 csys = 0.42 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=perl_makemaker dh_prep -O--buildsystem=perl_makemaker dh_auto_install --destdir=debian/libdevice-serialport-perl/ -O--buildsystem=perl_makemaker make -j22 install DESTDIR=/build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 Manifying 1 pod document Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Device/SerialPort/SerialPort.so Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/lib/i386-linux-gnu/perl5/5.40/Device/SerialPort.pm Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/man/man1/modemtest.1p Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/man/man3/Device::SerialPort.3pm Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/bin/modemtest make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installdocs -O--buildsystem=perl_makemaker dh_installchangelogs -O--buildsystem=perl_makemaker debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installexamples sed -i -e '1s|^#! perl|#!/usr/bin/perl|' -e '1s|^#!perl|#!/usr/bin/perl|' /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/doc/libdevice-serialport-perl/examples/* make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installman -O--buildsystem=perl_makemaker dh_systemd_enable -O--buildsystem=perl_makemaker dh_installinit -O--buildsystem=perl_makemaker dh_systemd_start -O--buildsystem=perl_makemaker dh_perl -O--buildsystem=perl_makemaker dh_link -O--buildsystem=perl_makemaker dh_strip_nondeterminism -O--buildsystem=perl_makemaker dh_compress -O--buildsystem=perl_makemaker dh_fixperms -O--buildsystem=perl_makemaker dh_missing -O--buildsystem=perl_makemaker dh_strip -O--buildsystem=perl_makemaker dh_makeshlibs -O--buildsystem=perl_makemaker dh_shlibdeps -O--buildsystem=perl_makemaker dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb -O--buildsystem=perl_makemaker dh_gencontrol -O--buildsystem=perl_makemaker dh_md5sums -O--buildsystem=perl_makemaker dh_builddeb -O--buildsystem=perl_makemaker dpkg-deb: building package 'libdevice-serialport-perl' in '../libdevice-serialport-perl_1.04-4_i386.deb'. dpkg-deb: building package 'libdevice-serialport-perl-dbgsym' in '../libdevice-serialport-perl-dbgsym_1.04-4_i386.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-serialport-perl_1.04-4_i386.buildinfo dpkg-genchanges --build=binary -O../libdevice-serialport-perl_1.04-4_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/122605 and its subdirectories I: Current time: Tue May 5 04:16:08 -12 2026 I: pbuilder-time-stamp: 1777997768 Wed Apr 2 09:53:11 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos2-i386.debian.net. Wed Apr 2 09:53:11 UTC 2025 I: Preparing to do remote build '2' on ionos2-i386.debian.net. Wed Apr 2 09:53:11 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Wed Apr 2 09:53:11 UTC 2025 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-4inNiz' ==================================================================================== Wed Apr 2 09:53:12 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos2-i386, called using "2 libdevice-serialport-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u 1.04-4" as arguments. Wed Apr 2 09:53:12 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-AhFvtsD7" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Apr 2 09:53:12 UTC 2025 I: Downloading source for trixie/libdevice-serialport-perl=1.04-4 Reading package lists... NOTICE: 'libdevice-serialport-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 106 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (dsc) [2211 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (tar) [98.7 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (diff) [5032 B] Fetched 106 kB in 0s (2289 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdevice-serialport-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdevice-serialport-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 106 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (dsc) [2211 B] Get:2 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (tar) [98.7 kB] Get:3 http://deb.debian.org/debian trixie/main libdevice-serialport-perl 1.04-4 (diff) [5032 B] Fetched 106 kB in 0s (2289 kB/s) Download complete and in download only mode ============================================================================= Re-Building libdevice-serialport-perl in trixie on i386 on ionos2-i386 now. Date: Wed Apr 2 11:53:12 CEST 2025 Date UTC: Wed Apr 2 09:53:12 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_0nZ9 + case ${ARCH} in + let NUM_CPU-=3 + case $ARCH in + locale=de_CH + language=de + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libdevice-serialport-perl = debian-installer -o libdevice-serialport-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libdevice-serialport-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_0nZ9 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2 --logfile b2/build.log libdevice-serialport-perl_1.04-4.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Apr 2 23:53:13 +14 2025 I: pbuilder-time-stamp: 1743587593 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdevice-serialport-perl_1.04-4.dsc] I: copying [./libdevice-serialport-perl_1.04.orig.tar.gz] I: copying [./libdevice-serialport-perl_1.04-4.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdevice-serialport-perl_1.04-4.dsc: unsupported subcommand dpkg-source: info: extracting libdevice-serialport-perl in libdevice-serialport-perl-1.04 dpkg-source: info: unpacking libdevice-serialport-perl_1.04.orig.tar.gz dpkg-source: info: unpacking libdevice-serialport-perl_1.04-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying pod.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D01_modify_environment starting debug: Running on ionos2-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Apr 2 09:53 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=fdefccf744974e79b1493117608b4021 LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=55075 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_0nZ9 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2 --logfile b2/build.log libdevice-serialport-perl_1.04-4.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10~), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 12.5 MB of archives. After unpacking 45.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-5 [96.5 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-2 [1220 kB] Fetched 12.5 MB in 0s (87.6 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_i386.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../29-libperl-dev_5.40.1-2_i386.deb ... Unpacking libperl-dev:i386 (5.40.1-2) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:i386 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/55075/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/55075/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libdevice-serialport-perl-1.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdevice-serialport-perl_1.04-4_source.changes dpkg-buildpackage: info: source package libdevice-serialport-perl dpkg-buildpackage: info: source version 1.04-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean --buildsystem=perl_makemaker dh_auto_clean -O--buildsystem=perl_makemaker dh_autoreconf_clean -O--buildsystem=perl_makemaker dh_clean -O--buildsystem=perl_makemaker debian/rules binary dh binary --buildsystem=perl_makemaker dh_update_autotools_config -O--buildsystem=perl_makemaker dh_autoreconf -O--buildsystem=perl_makemaker configure.ac:9: warning: The macro 'AC_PROG_CC_STDC' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/c.m4:1669: AC_PROG_CC_STDC is expanded from... configure.ac:9: the top level configure.ac:10: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:10: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:10: the top level configure.ac:11: warning: The macro 'AC_ISC_POSIX' is obsolete. configure.ac:11: You should run autoupdate. ./lib/autoconf/specific.m4:732: AC_ISC_POSIX is expanded from... configure.ac:11: the top level dh_auto_configure -O--buildsystem=perl_makemaker /usr/bin/perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" To enable serial port tests, use: perl Makefile.PL TESTPORT= where is a specific port or 'auto' to autodetect. Running ./configure ... checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for library containing strerror... none required checking for sys/ioctl.h... yes checking for termios.h... yes checking for sys/termiox.h... no checking for sys/termios.h... yes checking for sys/ttycom.h... no checking for sys/modem.h... no checking for IOKit/serial/ioss.h... no checking definition of _SC_CLK_TCK... found checking definition of TIOCMBIS... found checking definition of TIOCMBIC... found checking definition of TIOCMGET... found checking definition of CRTSCTS... found checking definition of OCRNL... found checking definition of ONLCR... found checking definition of ECHOKE... found checking definition of ECHOCTL... found checking definition of TIOCM_CAR... found checking definition of TIOCM_CD... found checking definition of TIOCM_RNG... found checking definition of TIOCM_RI... found checking definition of TIOCM_CTS... found checking definition of TIOCM_DSR... found checking definition of TIOCMIWAIT... found checking definition of TIOCGICOUNT... found checking definition of TIOCINQ... found checking definition of FIONREAD... found checking definition of TIOCOUTQ... found checking definition of TIOCSER_TEMT... found checking definition of TIOCM_LE... found checking definition of TIOCSERGETLSR... found checking definition of TIOCSDTR... missing checking definition of TIOCCDTR... missing checking definition of TIOCM_RTS... found checking definition of TIOCM_DTR... found checking definition of CTSXON... missing checking definition of RTSXOFF... missing checking definition of TCGETX... found checking definition of TCSETX... found checking definition of IOSSIOSPEED... missing checking definition of B0... found checking definition of B50... found checking definition of B75... found checking definition of B110... found checking definition of B134... found checking definition of B150... found checking definition of B200... found checking definition of B300... found checking definition of B600... found checking definition of B1200... found checking definition of B1800... found checking definition of B2400... found checking definition of B4800... found checking definition of B9600... found checking definition of B19200... found checking definition of B38400... found checking definition of B57600... found checking definition of B115200... found checking definition of B230400... found checking definition of B460800... found checking definition of B500000... found checking definition of B576000... found checking definition of B921600... found checking definition of B1000000... found checking definition of B1152000... found checking definition of B1500000... found checking definition of B2000000... found checking definition of B2500000... found checking definition of B3000000... found checking definition of B3500000... found checking definition of B4000000... found checking serial control via ioctl... yes checking read/write of RTS signal... yes checking read/write of DTR signal... yes checking read access to modem lines... yes checking read access to buffer status... yes checking read access to serial line status... yes checking normal CTS/RTS flow control... yes configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Device::SerialPort Writing MYMETA.yml and MYMETA.json You're ready to run 'make' now... dh_auto_build -O--buildsystem=perl_makemaker make -j10 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' Running Mkbootstrap for SerialPort () chmod 644 "SerialPort.bs" "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' SerialPort.xs > SerialPort.xsc "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 cp SerialPort.pm blib/lib/Device/SerialPort.pm mv SerialPort.xsc SerialPort.c i686-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.04\" -DXS_VERSION=\"1.04\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" SerialPort.c rm -f blib/arch/auto/Device/SerialPort/SerialPort.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdevice-serialport-perl-1.04=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong SerialPort.o -o blib/arch/auto/Device/SerialPort/SerialPort.so \ \ chmod 755 blib/arch/auto/Device/SerialPort/SerialPort.so cp modemtest blib/script/modemtest "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/modemtest Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_auto_test -O--buildsystem=perl_makemaker make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01timing.t ........... 1..7 ok 1 - use Device::SerialPort; ok 2 - Device::SerialPort->can('get_tick_count') ok 3 - get_tick_count returns a number ok 4 - sleep sleeps ok 5 - get_tick_count still returns a number ok 6 - measured sleep as more than 1 second ok 7 - measured sleep as less than 2 seconds ok t/10basic.t ............ skipped: No serial port selected for use with testing t/11saved-state.t ...... skipped: No serial port selected for use with testing t/20inherited.t ........ skipped: No serial port selected for use with testing t/21inherited-state.t .. skipped: No serial port selected for use with testing All tests successful. Files=5, Tests=7, 2 wallclock secs ( 0.02 usr 0.00 sys + 0.52 cusr 0.04 csys = 0.58 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=perl_makemaker dh_prep -O--buildsystem=perl_makemaker dh_auto_install --destdir=debian/libdevice-serialport-perl/ -O--buildsystem=perl_makemaker make -j10 install DESTDIR=/build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 Manifying 1 pod document Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Device/SerialPort/SerialPort.so Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/lib/i386-linux-gnu/perl5/5.40/Device/SerialPort.pm Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/man/man1/modemtest.1p Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/man/man3/Device::SerialPort.3pm Installing /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/bin/modemtest make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installdocs -O--buildsystem=perl_makemaker dh_installchangelogs -O--buildsystem=perl_makemaker debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installexamples sed -i -e '1s|^#! perl|#!/usr/bin/perl|' -e '1s|^#!perl|#!/usr/bin/perl|' /build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl/usr/share/doc/libdevice-serialport-perl/examples/* make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_installman -O--buildsystem=perl_makemaker dh_systemd_enable -O--buildsystem=perl_makemaker dh_installinit -O--buildsystem=perl_makemaker dh_systemd_start -O--buildsystem=perl_makemaker dh_perl -O--buildsystem=perl_makemaker dh_link -O--buildsystem=perl_makemaker dh_strip_nondeterminism -O--buildsystem=perl_makemaker dh_compress -O--buildsystem=perl_makemaker dh_fixperms -O--buildsystem=perl_makemaker dh_missing -O--buildsystem=perl_makemaker dh_strip -O--buildsystem=perl_makemaker dh_makeshlibs -O--buildsystem=perl_makemaker dh_shlibdeps -O--buildsystem=perl_makemaker dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb -O--buildsystem=perl_makemaker dh_gencontrol -O--buildsystem=perl_makemaker dh_md5sums -O--buildsystem=perl_makemaker dh_builddeb -O--buildsystem=perl_makemaker dpkg-deb: building package 'libdevice-serialport-perl' in '../libdevice-serialport-perl_1.04-4_i386.deb'. dpkg-deb: building package 'libdevice-serialport-perl-dbgsym' in '../libdevice-serialport-perl-dbgsym_1.04-4_i386.deb'. dpkg-genbuildinfo --build=binary -O../libdevice-serialport-perl_1.04-4_i386.buildinfo dpkg-genchanges --build=binary -O../libdevice-serialport-perl_1.04-4_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/55075/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/55075/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/55075 and its subdirectories I: Current time: Wed Apr 2 23:53:56 +14 2025 I: pbuilder-time-stamp: 1743587636 + false + set +x Wed Apr 2 09:53:56 UTC 2025 I: Signing ./b2/libdevice-serialport-perl_1.04-4_i386.buildinfo as libdevice-serialport-perl_1.04-4_i386.buildinfo.asc Wed Apr 2 09:53:56 UTC 2025 I: Signed ./b2/libdevice-serialport-perl_1.04-4_i386.buildinfo as ./b2/libdevice-serialport-perl_1.04-4_i386.buildinfo.asc Wed Apr 2 09:53:56 UTC 2025 - build #2 for libdevice-serialport-perl/trixie/i386 on ionos2-i386 done. Starting cleanup. All cleanup done. Wed Apr 2 09:53:56 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-AhFvtsD7, removing. /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u: total 48 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 09:53 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 09:53 b2 -rw-r--r-- 1 jenkins jenkins 2211 Jun 13 2022 libdevice-serialport-perl_1.04-4.dsc -rw------- 1 jenkins jenkins 33213 Apr 2 09:53 rbuildlog.YUQrp29 /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1: total 172 -rw-r--r-- 1 jenkins jenkins 29500 Apr 2 09:53 build.log -rw-r--r-- 1 jenkins jenkins 30792 Apr 2 09:53 libdevice-serialport-perl-dbgsym_1.04-4_i386.deb -rw-r--r-- 1 jenkins jenkins 5032 Apr 2 09:53 libdevice-serialport-perl_1.04-4.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2211 Apr 2 09:53 libdevice-serialport-perl_1.04-4.dsc -rw-r--r-- 1 jenkins jenkins 4964 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5846 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2508 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.changes -rw-r--r-- 1 jenkins jenkins 69320 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.deb -rw-r--r-- 1 jenkins jenkins 2326 Apr 2 09:53 libdevice-serialport-perl_1.04-4_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2: total 168 -rw-r--r-- 1 jenkins jenkins 31401 Apr 2 09:53 build.log -rw-r--r-- 1 jenkins jenkins 30792 Apr 2 09:53 libdevice-serialport-perl-dbgsym_1.04-4_i386.deb -rw-r--r-- 1 jenkins jenkins 5032 Apr 2 09:53 libdevice-serialport-perl_1.04-4.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2211 Apr 2 09:53 libdevice-serialport-perl_1.04-4.dsc -rw-r--r-- 1 jenkins jenkins 4964 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5846 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2508 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.changes -rw-r--r-- 1 jenkins jenkins 69320 Apr 2 09:53 libdevice-serialport-perl_1.04-4_i386.deb -rw-r--r-- 1 jenkins jenkins 2326 Apr 2 09:53 libdevice-serialport-perl_1.04-4_source.changes Wed Apr 2 09:53:57 UTC 2025 I: Deleting $TMPDIR on ionos2-i386.debian.net. Wed Apr 2 09:53:57 UTC 2025 I: libdevice-serialport-perl_1.04-4_i386.changes: Format: 1.8 Date: Mon, 13 Jun 2022 16:23:32 +0100 Source: libdevice-serialport-perl Binary: libdevice-serialport-perl libdevice-serialport-perl-dbgsym Architecture: i386 Version: 1.04-4 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libdevice-serialport-perl - emulation of Win32::SerialPort for Linux/POSIX Closes: 846807 Changes: libdevice-serialport-perl (1.04-4) unstable; urgency=medium . [ gregor herrmann ] * Strip trailing slash from metacpan URLs. . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Kees Cook from Uploaders. Thanks for your work! * Remove Zak B. Elep from Uploaders on request of the MIA team. (Closes: #846807) . [ Damyan Ivanov ] * change Priority from 'extra' to 'optional' . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Laurent Baillet ] * fix lintian file-contains-trailing-whitespace warning . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 9 to 10. * Remove constraints unnecessary since stretch: + Build-Depends: Drop versioned constraint on debhelper. Checksums-Sha1: 6c511b8f8037be6eb401e69d389cbc0b7a3f9617 30792 libdevice-serialport-perl-dbgsym_1.04-4_i386.deb 10bb48e34f40fb766aa3f6ed045484be1016dbe8 4964 libdevice-serialport-perl_1.04-4_i386.buildinfo a9f885db8d2a704a771ed6971f3d73cbfa61ba5f 69320 libdevice-serialport-perl_1.04-4_i386.deb Checksums-Sha256: 5380862008c6c2f12cad5c20a86e0e70215a58dd215cd31c16ae00422ac36047 30792 libdevice-serialport-perl-dbgsym_1.04-4_i386.deb e76749191a142ac47b84a1cbda0feb62ccca94cdb21254b1711e7167a52869ef 4964 libdevice-serialport-perl_1.04-4_i386.buildinfo 1dce12ed1bd48f2eabec1e3464c2a142ab1fe5953fff163dfea0092b93b95905 69320 libdevice-serialport-perl_1.04-4_i386.deb Files: 500af6116222023bf51359517bab1663 30792 debug optional libdevice-serialport-perl-dbgsym_1.04-4_i386.deb 2dcf30d4bf5bea1ac305e25acb2f41d8 4964 perl optional libdevice-serialport-perl_1.04-4_i386.buildinfo f4b1ddd08a340982851c1e74fdff9f18 69320 perl optional libdevice-serialport-perl_1.04-4_i386.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdevice-serialport-perl_1.04-4.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdevice-serialport-perl_1.04-4.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libdevice-serialport-perl_1.04-4.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libdevice-serialport-perl_1.04-4.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/i386/libdevice-serialport-perl_1.04-4_i386.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libdevice-serialport-perl_1.04-4.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-02 09:53:10.827443159 +0000 +++ b2/build.log 2025-04-02 09:53:57.042385416 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Tue May 5 04:15:32 -12 2026 -I: pbuilder-time-stamp: 1777997732 +I: Current time: Wed Apr 2 23:53:13 +14 2025 +I: pbuilder-time-stamp: 1743587593 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -25,54 +25,86 @@ dpkg-source: info: applying pod.patch I: using fakeroot in build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/122605/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D01_modify_environment starting +debug: Running on ionos2-i386. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Apr 2 09:53 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='i386' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='i386' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=i386 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=i686 + HOST_ARCH=i386 IFS=' ' - INVOCATION_ID='6939e7af26174d30bae58b2a4ca11c52' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - LD_LIBRARY_PATH='/usr/lib/libeatmydata' - LD_PRELOAD='libeatmydata.so' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='122605' - PS1='# ' - PS2='> ' + INVOCATION_ID=fdefccf744974e79b1493117608b4021 + LANG=C + LANGUAGE=de_CH:de + LC_ALL=C + LD_LIBRARY_PATH=/usr/lib/libeatmydata + LD_PRELOAD=libeatmydata.so + MACHTYPE=i686-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=55075 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_8PrO --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1 --logfile b1/build.log libdevice-serialport-perl_1.04-4.dsc' - SUDO_GID='112' - SUDO_UID='107' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/pbuilderrc_0nZ9 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2 --logfile b2/build.log libdevice-serialport-perl_1.04-4.dsc' + SUDO_GID=112 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos16-i386 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/122605/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -141,7 +173,7 @@ Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-2 [1220 kB] -Fetched 12.5 MB in 2s (7201 kB/s) +Fetched 12.5 MB in 0s (87.6 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) @@ -281,7 +313,11 @@ fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package -I: Running cd /build/reproducible-path/libdevice-serialport-perl-1.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdevice-serialport-perl_1.04-4_source.changes +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libdevice-serialport-perl-1.04/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdevice-serialport-perl_1.04-4_source.changes dpkg-buildpackage: info: source package libdevice-serialport-perl dpkg-buildpackage: info: source version 1.04-4 dpkg-buildpackage: info: source distribution unstable @@ -423,11 +459,11 @@ You're ready to run 'make' now... dh_auto_build -O--buildsystem=perl_makemaker - make -j22 + make -j10 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' Running Mkbootstrap for SerialPort () -"/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' SerialPort.xs > SerialPort.xsc chmod 644 "SerialPort.bs" +"/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' SerialPort.xs > SerialPort.xsc "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 cp SerialPort.pm blib/lib/Device/SerialPort.pm mv SerialPort.xsc SerialPort.c @@ -443,7 +479,7 @@ Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' dh_auto_test -O--buildsystem=perl_makemaker - make -j22 test TEST_VERBOSE=1 + make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t @@ -462,14 +498,14 @@ t/20inherited.t ........ skipped: No serial port selected for use with testing t/21inherited-state.t .. skipped: No serial port selected for use with testing All tests successful. -Files=5, Tests=7, 2 wallclock secs ( 0.04 usr 0.00 sys + 0.36 cusr 0.02 csys = 0.42 CPU) +Files=5, Tests=7, 2 wallclock secs ( 0.02 usr 0.00 sys + 0.52 cusr 0.04 csys = 0.58 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdevice-serialport-perl-1.04' create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=perl_makemaker dh_prep -O--buildsystem=perl_makemaker dh_auto_install --destdir=debian/libdevice-serialport-perl/ -O--buildsystem=perl_makemaker - make -j22 install DESTDIR=/build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j10 install DESTDIR=/build/reproducible-path/libdevice-serialport-perl-1.04/debian/libdevice-serialport-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdevice-serialport-perl-1.04' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs 644 Manifying 1 pod document @@ -518,12 +554,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/55075/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/122605 and its subdirectories -I: Current time: Tue May 5 04:16:08 -12 2026 -I: pbuilder-time-stamp: 1777997768 +I: removing directory /srv/workspace/pbuilder/55075 and its subdirectories +I: Current time: Wed Apr 2 23:53:56 +14 2025 +I: pbuilder-time-stamp: 1743587636 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libdevice-serialport-perl_1.04-4.diff: 68.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libdevice-serialport-perl_1.04-4.diff.gz b2/build.log: 75.4% -- replaced with stdout Compressing the 1st log... b1/build.log: 76.0% -- replaced with stdout Wed Apr 2 09:53:58 UTC 2025 I: diffoscope 293 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libdevice-serialport-perl_trixie_i386_1743587638 + touch /var/log/reproducible-builds/diffoscope_stamp_libdevice-serialport-perl_trixie_i386_1743587638 + RESULT=0 + systemd-run '--description=diffoscope on libdevice-serialport-perl/1.04-4 in trixie/i386' --slice=rb-build-diffoscope.slice -u rb-diffoscope-i386_10-49581 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u --run-session -c jenkins-reproducible-trixie-diffoscope-958d847f-fc4e-4982-9325-7735856b1167 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/dbd-tmp-auznIeP ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/libdevice-serialport-perl_1.04-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/libdevice-serialport-perl_1.04-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/libdevice-serialport-perl_1.04-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1/libdevice-serialport-perl_1.04-4_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2/libdevice-serialport-perl_1.04-4_i386.changes' + false + set +x Running as unit: rb-diffoscope-i386_10-49581.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/libdevice-serialport-perl_1.04-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/libdevice-serialport-perl_1.04-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/libdevice-serialport-perl_1.04-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b1/libdevice-serialport-perl_1.04-4_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.HhV89a5u/b2/libdevice-serialport-perl_1.04-4_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.004s) 0.004s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 234ms CPU time consumed: 234ms _ _ _ _ _ _ _ | (_) |__ __| | _____ _(_) ___ ___ ___ ___ _ __(_) __ _| |_ __ | | | '_ \ / _` |/ _ \ \ / / |/ __/ _ \_____/ __|/ _ \ '__| |/ _` | | '_ \ | | | |_) | (_| | __/\ V /| | (_| __/_____\__ \ __/ | | | (_| | | |_) | |_|_|_.__/ \__,_|\___| \_/ |_|\___\___| |___/\___|_| |_|\__,_|_| .__/ |_| _ _ ___ _ __| |_ _ __ ___ _ __| | / _ \| '__| __|____| '_ \ / _ \ '__| | | (_) | | | ||_____| |_) | __/ | | | \___/|_| \__| | .__/ \___|_| |_| |_| Wed Apr 2 09:53:59 UTC 2025 I: diffoscope 293 found no differences in the changes files, and a .buildinfo file also exists. Wed Apr 2 09:53:59 UTC 2025 I: libdevice-serialport-perl from trixie built successfully and reproducibly on i386. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-02 09:53:59] INFO: Starting at 2025-04-02 09:53:59.656486 [2025-04-02 09:53:59] INFO: Generating the pages of 1 package(s) [2025-04-02 09:54:00] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/i386/libdevice-serialport-perl didn't produce a buildlog, even though it has been built. [2025-04-02 09:54:00] INFO: Finished at 2025-04-02 09:54:00.084712, took: 0:00:00.428232 Wed Apr 2 09:54:00 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/i386/libdevice-serialport-perl.html Wed Apr 2 09:54:00 UTC 2025 I: Submitting .buildinfo files to external archives: Wed Apr 2 09:54:00 UTC 2025 I: Submitting 8.0K b1/libdevice-serialport-perl_1.04-4_i386.buildinfo.asc https://buildinfo.debian.net/10bb48e34f40fb766aa3f6ed045484be1016dbe8/libdevice-serialport-perl_1.04-4_i386 Wed Apr 2 09:54:15 UTC 2025 I: Submitting 8.0K b2/libdevice-serialport-perl_1.04-4_i386.buildinfo.asc https://buildinfo.debian.net/a985c442fc8401af7a854c8a0fe4ce09ca6622b4/libdevice-serialport-perl_1.04-4_i386 Wed Apr 2 09:54:32 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Apr 2 09:54:32 UTC 2025 I: Done submitting .buildinfo files. Wed Apr 2 09:54:32 UTC 2025 I: Removing signed libdevice-serialport-perl_1.04-4_i386.buildinfo.asc files: removed './b1/libdevice-serialport-perl_1.04-4_i386.buildinfo.asc' removed './b2/libdevice-serialport-perl_1.04-4_i386.buildinfo.asc' 1743587672 i386 trixie libdevice-serialport-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdevice-serialport-perl_1.04-4.rbuild.log: 73.0% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdevice-serialport-perl_1.04-4.rbuild.log.gz [2025-04-02 09:54:32] INFO: Starting at 2025-04-02 09:54:32.328491 [2025-04-02 09:54:32] INFO: Generating the pages of 1 package(s) [2025-04-02 09:54:32] INFO: Finished at 2025-04-02 09:54:32.742182, took: 0:00:00.413698 All cleanup done. Wed Apr 2 09:54:32 UTC 2025 - total duration: 0h 1m 45s. Wed Apr 2 09:54:32 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-w6uTht3u, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 2min 18.266s CPU time consumed: 7.055s