Running as unit: rb-build-i386_10-49676.service ==================================================================================== Wed Apr 2 17:27:37 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_10) on jenkins, called using "ionos16-i386 ionos2-i386" as arguments. Wed Apr 2 17:27:37 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-SjHCpvWO" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Apr 2 17:27:38 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Wed Apr 2 17:27:38 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-Y8LEaT' Wed Apr 2 17:27:38 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Wed Apr 2 17:27:38 UTC 2025 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-M0r5YN' ok, let's check if libdata-float-perl is building anywhere yet… ok, libdata-float-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libdata-float-perl in trixie on i386 on jenkins now. 1st build will be done on ionos16-i386.debian.net. 2nd build will be done on ionos2-i386.debian.net. ============================================================================= Wed Apr 2 17:27:53 UTC 2025 I: starting to build libdata-float-perl/trixie/i386 on jenkins on '2025-04-02 17:27' Wed Apr 2 17:27:53 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_10/49676/console.log 1743614873 i386 trixie libdata-float-perl Wed Apr 2 17:27:53 UTC 2025 I: Downloading source for trixie/libdata-float-perl=0.014-1 --2025-04-02 17:27:54-- http://deb.debian.org/debian/pool/main/libd/libdata-float-perl/libdata-float-perl_0.014-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2490 (2.4K) [text/prs.lines.tag] Saving to: ‘libdata-float-perl_0.014-1.dsc’ 0K .. 100% 382M=0s 2025-04-02 17:27:54 (382 MB/s) - ‘libdata-float-perl_0.014-1.dsc’ saved [2490/2490] --2025-04-02 17:27:54-- http://deb.debian.org/debian/pool/main/libd/libdata-float-perl/libdata-float-perl_0.014-1.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2490 (2.4K) [text/prs.lines.tag] Saving to: ‘libdata-float-perl_0.014-1.dsc’ 0K .. 100% 382M=0s 2025-04-02 17:27:54 (382 MB/s) - ‘libdata-float-perl_0.014-1.dsc’ saved [2490/2490] Wed Apr 2 17:27:54 UTC 2025 I: libdata-float-perl_0.014-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdata-float-perl Binary: libdata-float-perl Architecture: all Version: 0.014-1 Maintainer: Debian Perl Group Uploaders: Ivan Kohler , Angel Abad Homepage: https://metacpan.org/release/Data-Float Standards-Version: 4.7.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libtest-pod-coverage-perl , libtest-pod-perl , libtest-simple-perl , perl Package-List: libdata-float-perl deb perl optional arch=all Checksums-Sha1: 975172ea02a2f52adb769a281ee5c6695dc6f5e6 24081 libdata-float-perl_0.014.orig.tar.gz 9f28cf66870233e982d29e612868b03f6fe64b75 3416 libdata-float-perl_0.014-1.debian.tar.xz Checksums-Sha256: a1a1f96266818b550ea644d704c2e000d94910bf0a7b99eb3540310a1a1fd3b4 24081 libdata-float-perl_0.014.orig.tar.gz 2ddeb7c0eed38f26289a1e1aef726204ecd438fd42cc8511bb54a8a69957bfc6 3416 libdata-float-perl_0.014-1.debian.tar.xz Files: b7a0f112aced16612e777af2d2c9de55 24081 libdata-float-perl_0.014.orig.tar.gz 65a10535c1873f50865292472c247561 3416 libdata-float-perl_0.014-1.debian.tar.xz Dgit: 33ab3fdb929fc4b9035eefede34202088fa555f9 debian archive/debian/0.014-1 https://git.dgit.debian.org/libdata-float-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmfobHRfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgarUA/+PMDQhST3etFTaxKYi37KzR0V/J7x2M+aPqRv9WIK49iSnJpXF2plUz4p lfcf6zh93fd6usHo89MAzCkeq4NtxLFKgGmAlIqjEyuS2gKtec8AEtOWuuwN0aN7 RUrdyCPTW86e6/Zk+P9LpNf+hHGG2bm5r26gGH4OZThsTcSxy8fsZSNFRrKh1OoB coB2HvVVHa/4+xFaVTGEIv4/vrQlfmf/GedAByBRt4UhTfYLypPdSMs0EscQHX6I mTNxhbeXIqP6xaMalzoSAhyPVFzHQ2bY68mWekp4Uxzthf0rVasJQ1chSo2/meAk 4a+bLTQFwaAPrnepiqie+VFNn5RfXmpFZB6s6jsvq2i5iWKWSU7nylbl9Yf8LvqS 6w4mfIHx+6RYTwqoVuAXEgqyNjHt/SvQiqk3ru8Uj3pyUNHKNJZDVl18K0njRw0K M1JspYsmM7CGU7BBdHtnz28UyQYEG+jWKtjubwH1TIeDw7rWlZt3YenXR153I3Ib qxsS2+VpLUNRx5NTFMO+dF9Sv9yelGbK3A27rmYfq8jX0DavX7uVu3X6VKaQwy8c FFE73rJwD3JmleqZeLLFt7eAnCZsVBH60/CoGbJTcSbHRVX01RnzsErIUoJiCCRG mV/5Y8HiOYg7eK4z96QlZg6HNEiae6fiYPE8x/Hi369EXbUK3l0= =usJl -----END PGP SIGNATURE----- Wed Apr 2 17:27:54 UTC 2025 I: Checking whether the package is not for us Wed Apr 2 17:27:54 UTC 2025 I: Starting 1st build on remote node ionos16-i386.debian.net. Wed Apr 2 17:27:54 UTC 2025 I: Preparing to do remote build '1' on ionos16-i386.debian.net. Wed Apr 2 17:27:54 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Wed Apr 2 17:27:54 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-dbxj4y' ==================================================================================== Tue May 5 23:50:53 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos16-i386, called using "1 libdata-float-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad 0.014-1" as arguments. Tue May 5 23:50:53 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-oiiR29DZ" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue May 5 23:50:53 UTC 2026 I: Downloading source for trixie/libdata-float-perl=0.014-1 Reading package lists... NOTICE: 'libdata-float-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.0 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (dsc) [2490 B] Get:2 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (tar) [24.1 kB] Get:3 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (diff) [3416 B] Fetched 30.0 kB in 0s (1025 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdata-float-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.0 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (dsc) [2490 B] Get:2 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (tar) [24.1 kB] Get:3 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (diff) [3416 B] Fetched 30.0 kB in 0s (1025 kB/s) Download complete and in download only mode ============================================================================= Building libdata-float-perl in trixie on i386 on ionos16-i386 now. Date: Wed May 6 01:50:54 CEST 2026 Date UTC: Tue May 5 23:50:54 UTC 2026 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue May 5 11:50:54 -12 2026 I: pbuilder-time-stamp: 1778025054 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdata-float-perl_0.014-1.dsc] I: copying [./libdata-float-perl_0.014.orig.tar.gz] I: copying [./libdata-float-perl_0.014-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdata-float-perl_0.014-1.dsc: unsupported subcommand dpkg-source: info: extracting libdata-float-perl in libdata-float-perl-0.014 dpkg-source: info: unpacking libdata-float-perl_0.014.orig.tar.gz dpkg-source: info: unpacking libdata-float-perl_0.014-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/23106/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='ce485ab521dc46c49bb4b8b45c9d4271' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='23106' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_ffZq --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1 --logfile b1/build.log libdata-float-perl_0.014-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/23106/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-pod-coverage-perl, libtest-pod-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 11.4 MB of archives. After unpacking 41.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-5 [96.5 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 11.4 MB in 0s (51.7 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_i386.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../30-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../31-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../32-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libdata-float-perl-0.014/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdata-float-perl_0.014-1_source.changes dpkg-buildpackage: info: source package libdata-float-perl dpkg-buildpackage: info: source version 0.014-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-float-perl-0.014=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-float-perl-0.014=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Data::Float Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' cp lib/Data/Float.pm blib/lib/Data/Float.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/class.t ...... 1..113 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok t/const.t ...... 1..30 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok t/copysign.t ... 1..46 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok t/hex.t ........ 1..102 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok t/id_cmp.t ..... 1..235 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok 114 ok 115 ok 116 ok 117 ok 118 ok 119 ok 120 ok 121 ok 122 ok 123 ok 124 ok 125 ok 126 ok 127 ok 128 ok 129 ok 130 ok 131 ok 132 ok 133 ok 134 ok 135 ok 136 ok 137 ok 138 ok 139 ok 140 ok 141 ok 142 ok 143 ok 144 ok 145 ok 146 ok 147 ok 148 ok 149 ok 150 ok 151 ok 152 ok 153 ok 154 ok 155 ok 156 ok 157 ok 158 ok 159 ok 160 ok 161 ok 162 ok 163 ok 164 ok 165 ok 166 ok 167 ok 168 ok 169 ok 170 ok 171 ok 172 ok 173 ok 174 ok 175 ok 176 ok 177 ok 178 ok 179 ok 180 ok 181 ok 182 ok 183 ok 184 ok 185 ok 186 ok 187 ok 188 ok 189 ok 190 ok 191 ok 192 ok 193 ok 194 ok 195 ok 196 ok 197 ok 198 ok 199 ok 200 ok 201 ok 202 ok 203 ok 204 ok 205 ok 206 ok 207 ok 208 ok 209 ok 210 ok 211 ok 212 ok 213 ok 214 ok 215 ok 216 ok 217 ok 218 ok 219 ok 220 ok 221 ok 222 ok 223 ok 224 ok 225 ok 226 ok 227 ok 228 ok 229 ok 230 ok 231 ok 232 ok 233 ok 234 ok 235 ok t/nextafter.t .. 1..65 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok t/parts.t ...... 1..102 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok t/pod_cvg.t .... 1..1 ok 1 - Pod coverage on Data::Float ok t/pod_syn.t .... 1..1 ok 1 - POD test for blib/lib/Data/Float.pm ok t/pow2.t ....... 1..25 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok All tests successful. Files=10, Tests=720, 2 wallclock secs ( 0.12 usr 0.02 sys + 1.14 cusr 0.10 csys = 1.38 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdata-float-perl/ make -j22 install DESTDIR=/build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' Manifying 1 pod document Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/perl5/Data/Float.pm Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/man/man3/Data::Float.3pm make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdata-float-perl' in '../libdata-float-perl_0.014-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libdata-float-perl_0.014-1_i386.buildinfo dpkg-genchanges --build=binary -O../libdata-float-perl_0.014-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/23106 and its subdirectories I: Current time: Tue May 5 11:51:31 -12 2026 I: pbuilder-time-stamp: 1778025091 Tue May 5 23:51:31 UTC 2026 I: Signing ./b1/libdata-float-perl_0.014-1_i386.buildinfo as libdata-float-perl_0.014-1_i386.buildinfo.asc Tue May 5 23:51:31 UTC 2026 I: Signed ./b1/libdata-float-perl_0.014-1_i386.buildinfo as ./b1/libdata-float-perl_0.014-1_i386.buildinfo.asc Tue May 5 23:51:31 UTC 2026 - build #1 for libdata-float-perl/trixie/i386 on ionos16-i386 done. Starting cleanup. All cleanup done. Tue May 5 23:51:31 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-oiiR29DZ, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 17:28 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 17:27 b2 -rw-r--r-- 1 jenkins jenkins 2490 Mar 29 22:09 libdata-float-perl_0.014-1.dsc -rw------- 1 jenkins jenkins 3664 Apr 2 17:27 rbuildlog.Sueu4It /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1: total 112 -rw-r--r-- 1 jenkins jenkins 26046 Apr 2 17:28 build.log -rw-r--r-- 1 jenkins jenkins 3416 Apr 2 17:28 libdata-float-perl_0.014-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2490 Apr 2 17:28 libdata-float-perl_0.014-1.dsc -rw-r--r-- 1 jenkins jenkins 27672 Apr 2 17:28 libdata-float-perl_0.014-1_all.deb -rw-r--r-- 1 jenkins jenkins 4726 Apr 2 17:28 libdata-float-perl_0.014-1_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5608 Apr 2 17:28 libdata-float-perl_0.014-1_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1457 Apr 2 17:28 libdata-float-perl_0.014-1_i386.changes -rw-r--r-- 1 jenkins jenkins 1907 Apr 2 17:28 libdata-float-perl_0.014-1_source.changes -rw-r--r-- 1 jenkins jenkins 24081 Apr 2 17:28 libdata-float-perl_0.014.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2: total 0 Wed Apr 2 17:28:33 UTC 2025 I: Deleting $TMPDIR on ionos16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue May 5 11:50:54 -12 2026 I: pbuilder-time-stamp: 1778025054 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdata-float-perl_0.014-1.dsc] I: copying [./libdata-float-perl_0.014.orig.tar.gz] I: copying [./libdata-float-perl_0.014-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdata-float-perl_0.014-1.dsc: unsupported subcommand dpkg-source: info: extracting libdata-float-perl in libdata-float-perl-0.014 dpkg-source: info: unpacking libdata-float-perl_0.014.orig.tar.gz dpkg-source: info: unpacking libdata-float-perl_0.014-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/23106/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='ce485ab521dc46c49bb4b8b45c9d4271' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='23106' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_ffZq --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1 --logfile b1/build.log libdata-float-perl_0.014-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/23106/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-pod-coverage-perl, libtest-pod-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 11.4 MB of archives. After unpacking 41.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-5 [96.5 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 11.4 MB in 0s (51.7 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_i386.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../30-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../31-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../32-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libdata-float-perl-0.014/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdata-float-perl_0.014-1_source.changes dpkg-buildpackage: info: source package libdata-float-perl dpkg-buildpackage: info: source version 0.014-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-float-perl-0.014=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-float-perl-0.014=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Data::Float Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' cp lib/Data/Float.pm blib/lib/Data/Float.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/class.t ...... 1..113 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok t/const.t ...... 1..30 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok t/copysign.t ... 1..46 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok t/hex.t ........ 1..102 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok t/id_cmp.t ..... 1..235 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok 114 ok 115 ok 116 ok 117 ok 118 ok 119 ok 120 ok 121 ok 122 ok 123 ok 124 ok 125 ok 126 ok 127 ok 128 ok 129 ok 130 ok 131 ok 132 ok 133 ok 134 ok 135 ok 136 ok 137 ok 138 ok 139 ok 140 ok 141 ok 142 ok 143 ok 144 ok 145 ok 146 ok 147 ok 148 ok 149 ok 150 ok 151 ok 152 ok 153 ok 154 ok 155 ok 156 ok 157 ok 158 ok 159 ok 160 ok 161 ok 162 ok 163 ok 164 ok 165 ok 166 ok 167 ok 168 ok 169 ok 170 ok 171 ok 172 ok 173 ok 174 ok 175 ok 176 ok 177 ok 178 ok 179 ok 180 ok 181 ok 182 ok 183 ok 184 ok 185 ok 186 ok 187 ok 188 ok 189 ok 190 ok 191 ok 192 ok 193 ok 194 ok 195 ok 196 ok 197 ok 198 ok 199 ok 200 ok 201 ok 202 ok 203 ok 204 ok 205 ok 206 ok 207 ok 208 ok 209 ok 210 ok 211 ok 212 ok 213 ok 214 ok 215 ok 216 ok 217 ok 218 ok 219 ok 220 ok 221 ok 222 ok 223 ok 224 ok 225 ok 226 ok 227 ok 228 ok 229 ok 230 ok 231 ok 232 ok 233 ok 234 ok 235 ok t/nextafter.t .. 1..65 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok t/parts.t ...... 1..102 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok t/pod_cvg.t .... 1..1 ok 1 - Pod coverage on Data::Float ok t/pod_syn.t .... 1..1 ok 1 - POD test for blib/lib/Data/Float.pm ok t/pow2.t ....... 1..25 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok All tests successful. Files=10, Tests=720, 2 wallclock secs ( 0.12 usr 0.02 sys + 1.14 cusr 0.10 csys = 1.38 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdata-float-perl/ make -j22 install DESTDIR=/build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' Manifying 1 pod document Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/perl5/Data/Float.pm Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/man/man3/Data::Float.3pm make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdata-float-perl' in '../libdata-float-perl_0.014-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libdata-float-perl_0.014-1_i386.buildinfo dpkg-genchanges --build=binary -O../libdata-float-perl_0.014-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/23106 and its subdirectories I: Current time: Tue May 5 11:51:31 -12 2026 I: pbuilder-time-stamp: 1778025091 Wed Apr 2 17:28:34 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos2-i386.debian.net. Wed Apr 2 17:28:34 UTC 2025 I: Preparing to do remote build '2' on ionos2-i386.debian.net. Wed Apr 2 17:28:34 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Wed Apr 2 17:28:34 UTC 2025 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-cjLVpj' ==================================================================================== Wed Apr 2 17:28:35 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos2-i386, called using "2 libdata-float-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad 0.014-1" as arguments. Wed Apr 2 17:28:35 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-FOhKRuji" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Apr 2 17:28:35 UTC 2025 I: Downloading source for trixie/libdata-float-perl=0.014-1 Reading package lists... NOTICE: 'libdata-float-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.0 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (dsc) [2490 B] Get:2 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (tar) [24.1 kB] Get:3 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (diff) [3416 B] Fetched 30.0 kB in 0s (572 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libdata-float-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libdata-float-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.0 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (dsc) [2490 B] Get:2 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (tar) [24.1 kB] Get:3 http://deb.debian.org/debian trixie/main libdata-float-perl 0.014-1 (diff) [3416 B] Fetched 30.0 kB in 0s (572 kB/s) Download complete and in download only mode ============================================================================= Re-Building libdata-float-perl in trixie on i386 on ionos2-i386 now. Date: Wed Apr 2 19:28:35 CEST 2025 Date UTC: Wed Apr 2 17:28:35 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_Q5zK + case ${ARCH} in + let NUM_CPU-=3 + case $ARCH in + locale=de_CH + language=de + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libdata-float-perl = debian-installer -o libdata-float-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libdata-float-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_Q5zK --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2 --logfile b2/build.log libdata-float-perl_0.014-1.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 3 07:28:36 +14 2025 I: pbuilder-time-stamp: 1743614916 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libdata-float-perl_0.014-1.dsc] I: copying [./libdata-float-perl_0.014.orig.tar.gz] I: copying [./libdata-float-perl_0.014-1.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libdata-float-perl_0.014-1.dsc: unsupported subcommand dpkg-source: info: extracting libdata-float-perl in libdata-float-perl-0.014 dpkg-source: info: unpacking libdata-float-perl_0.014.orig.tar.gz dpkg-source: info: unpacking libdata-float-perl_0.014-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D01_modify_environment starting debug: Running on ionos2-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Apr 2 17:28 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=aa77b454ddd94ce9bd84c59a91d1ac12 LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=31741 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_Q5zK --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2 --logfile b2/build.log libdata-float-perl_0.014-1.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libtest-pod-coverage-perl, libtest-pod-perl, libtest-simple-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 11.4 MB of archives. After unpacking 41.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-5 [96.5 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.1 [920 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libpod-parser-perl all 1.67-1 [94.1 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 11.4 MB in 0s (70.3 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_i386.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../29-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../30-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../31-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../32-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/31741/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/31741/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libdata-float-perl-0.014/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdata-float-perl_0.014-1_source.changes dpkg-buildpackage: info: source package libdata-float-perl dpkg-buildpackage: info: source version 0.014-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-float-perl-0.014=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libdata-float-perl-0.014=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Data::Float Writing MYMETA.yml and MYMETA.json dh_auto_build make -j10 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' cp lib/Data/Float.pm blib/lib/Data/Float.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_auto_test make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/class.t ...... 1..113 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok t/const.t ...... 1..30 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok t/copysign.t ... 1..46 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok t/hex.t ........ 1..102 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok t/id_cmp.t ..... 1..235 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok 114 ok 115 ok 116 ok 117 ok 118 ok 119 ok 120 ok 121 ok 122 ok 123 ok 124 ok 125 ok 126 ok 127 ok 128 ok 129 ok 130 ok 131 ok 132 ok 133 ok 134 ok 135 ok 136 ok 137 ok 138 ok 139 ok 140 ok 141 ok 142 ok 143 ok 144 ok 145 ok 146 ok 147 ok 148 ok 149 ok 150 ok 151 ok 152 ok 153 ok 154 ok 155 ok 156 ok 157 ok 158 ok 159 ok 160 ok 161 ok 162 ok 163 ok 164 ok 165 ok 166 ok 167 ok 168 ok 169 ok 170 ok 171 ok 172 ok 173 ok 174 ok 175 ok 176 ok 177 ok 178 ok 179 ok 180 ok 181 ok 182 ok 183 ok 184 ok 185 ok 186 ok 187 ok 188 ok 189 ok 190 ok 191 ok 192 ok 193 ok 194 ok 195 ok 196 ok 197 ok 198 ok 199 ok 200 ok 201 ok 202 ok 203 ok 204 ok 205 ok 206 ok 207 ok 208 ok 209 ok 210 ok 211 ok 212 ok 213 ok 214 ok 215 ok 216 ok 217 ok 218 ok 219 ok 220 ok 221 ok 222 ok 223 ok 224 ok 225 ok 226 ok 227 ok 228 ok 229 ok 230 ok 231 ok 232 ok 233 ok 234 ok 235 ok t/nextafter.t .. 1..65 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok t/parts.t ...... 1..102 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok t/pod_cvg.t .... 1..1 ok 1 - Pod coverage on Data::Float ok t/pod_syn.t .... 1..1 ok 1 - POD test for blib/lib/Data/Float.pm ok t/pow2.t ....... 1..25 ok 1 - use Data::Float; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok All tests successful. Files=10, Tests=720, 1 wallclock secs ( 0.08 usr 0.02 sys + 1.12 cusr 0.12 csys = 1.34 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdata-float-perl/ make -j10 install DESTDIR=/build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' Manifying 1 pod document Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/perl5/Data/Float.pm Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/man/man3/Data::Float.3pm make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdata-float-perl' in '../libdata-float-perl_0.014-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libdata-float-perl_0.014-1_i386.buildinfo dpkg-genchanges --build=binary -O../libdata-float-perl_0.014-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/31741/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/31741/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31741 and its subdirectories I: Current time: Thu Apr 3 07:29:05 +14 2025 I: pbuilder-time-stamp: 1743614945 + false + set +x Wed Apr 2 17:29:05 UTC 2025 I: Signing ./b2/libdata-float-perl_0.014-1_i386.buildinfo as libdata-float-perl_0.014-1_i386.buildinfo.asc Wed Apr 2 17:29:05 UTC 2025 I: Signed ./b2/libdata-float-perl_0.014-1_i386.buildinfo as ./b2/libdata-float-perl_0.014-1_i386.buildinfo.asc Wed Apr 2 17:29:05 UTC 2025 - build #2 for libdata-float-perl/trixie/i386 on ionos2-i386 done. Starting cleanup. All cleanup done. Wed Apr 2 17:29:05 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-FOhKRuji, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad: total 44 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 17:28 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 2 17:29 b2 -rw-r--r-- 1 jenkins jenkins 2490 Mar 29 22:09 libdata-float-perl_0.014-1.dsc -rw------- 1 jenkins jenkins 29994 Apr 2 17:28 rbuildlog.Sueu4It /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1: total 112 -rw-r--r-- 1 jenkins jenkins 26046 Apr 2 17:28 build.log -rw-r--r-- 1 jenkins jenkins 3416 Apr 2 17:28 libdata-float-perl_0.014-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2490 Apr 2 17:28 libdata-float-perl_0.014-1.dsc -rw-r--r-- 1 jenkins jenkins 27672 Apr 2 17:28 libdata-float-perl_0.014-1_all.deb -rw-r--r-- 1 jenkins jenkins 4726 Apr 2 17:28 libdata-float-perl_0.014-1_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5608 Apr 2 17:28 libdata-float-perl_0.014-1_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1457 Apr 2 17:28 libdata-float-perl_0.014-1_i386.changes -rw-r--r-- 1 jenkins jenkins 1907 Apr 2 17:28 libdata-float-perl_0.014-1_source.changes -rw-r--r-- 1 jenkins jenkins 24081 Apr 2 17:28 libdata-float-perl_0.014.orig.tar.gz /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2: total 112 -rw-r--r-- 1 jenkins jenkins 27951 Apr 2 17:29 build.log -rw-r--r-- 1 jenkins jenkins 3416 Apr 2 17:29 libdata-float-perl_0.014-1.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2490 Apr 2 17:29 libdata-float-perl_0.014-1.dsc -rw-r--r-- 1 jenkins jenkins 27672 Apr 2 17:29 libdata-float-perl_0.014-1_all.deb -rw-r--r-- 1 jenkins jenkins 4726 Apr 2 17:29 libdata-float-perl_0.014-1_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5608 Apr 2 17:29 libdata-float-perl_0.014-1_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1457 Apr 2 17:29 libdata-float-perl_0.014-1_i386.changes -rw-r--r-- 1 jenkins jenkins 1907 Apr 2 17:29 libdata-float-perl_0.014-1_source.changes -rw-r--r-- 1 jenkins jenkins 24081 Apr 2 17:29 libdata-float-perl_0.014.orig.tar.gz Wed Apr 2 17:29:06 UTC 2025 I: Deleting $TMPDIR on ionos2-i386.debian.net. Wed Apr 2 17:29:06 UTC 2025 I: libdata-float-perl_0.014-1_i386.changes: Format: 1.8 Date: Sat, 29 Mar 2025 22:53:49 +0100 Source: libdata-float-perl Binary: libdata-float-perl Architecture: all Version: 0.014-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libdata-float-perl - Perl module encapsulating the floating point data type Changes: libdata-float-perl (0.014-1) unstable; urgency=medium . * Team upload. * Import upstream version 0.014. * Update debian/upstream/metadata. * Update years of upstream copyright. * Update Upstream-Contact. * Add debian/libdata-float-perl.docs. * Update build dependencies. * Declare compliance with Debian Policy 4.7.2. * Set Rules-Requires-Root: no. * Annotate test-only build dependencies with . Checksums-Sha1: 2e27d172a1f92ab0b72c6f367bffaeb782b975e2 27672 libdata-float-perl_0.014-1_all.deb a587bf6aa8c8912316d57bc99f2c1805baaf39ab 4726 libdata-float-perl_0.014-1_i386.buildinfo Checksums-Sha256: e653caf0ea573b1322186ade0ec58aa4c6899bedbefc66818a1e42a1713acd50 27672 libdata-float-perl_0.014-1_all.deb 256b38ea330fc907c1e951eacdc42a902b3ceb7907a5164f0984d6e69a4f04ab 4726 libdata-float-perl_0.014-1_i386.buildinfo Files: aeda21af5fe3aaecc67032f69d9ec332 27672 perl optional libdata-float-perl_0.014-1_all.deb e9d534c834cfd378b01009ada721a32a 4726 perl optional libdata-float-perl_0.014-1_i386.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdata-float-perl_0.013-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdata-float-perl_0.013-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libdata-float-perl_0.013-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libdata-float-perl_0.013-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/i386/libdata-float-perl_0.013-3_i386.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libdata-float-perl_0.013-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-02 17:28:33.915851977 +0000 +++ b2/build.log 2025-04-02 17:29:06.487093432 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Tue May 5 11:50:54 -12 2026 -I: pbuilder-time-stamp: 1778025054 +I: Current time: Thu Apr 3 07:28:36 +14 2025 +I: pbuilder-time-stamp: 1743614916 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -23,54 +23,86 @@ dpkg-source: info: unpacking libdata-float-perl_0.014-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/23106/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D01_modify_environment starting +debug: Running on ionos2-i386. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Apr 2 17:28 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='i386' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='i386' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=i386 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=i686 + HOST_ARCH=i386 IFS=' ' - INVOCATION_ID='ce485ab521dc46c49bb4b8b45c9d4271' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - LD_LIBRARY_PATH='/usr/lib/libeatmydata' - LD_PRELOAD='libeatmydata.so' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='23106' - PS1='# ' - PS2='> ' + INVOCATION_ID=aa77b454ddd94ce9bd84c59a91d1ac12 + LANG=C + LANGUAGE=de_CH:de + LC_ALL=C + LD_LIBRARY_PATH=/usr/lib/libeatmydata + LD_PRELOAD=libeatmydata.so + MACHTYPE=i686-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=31741 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_ffZq --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1 --logfile b1/build.log libdata-float-perl_0.014-1.dsc' - SUDO_GID='112' - SUDO_UID='107' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/pbuilderrc_Q5zK --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2 --logfile b2/build.log libdata-float-perl_0.014-1.dsc' + SUDO_GID=112 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos16-i386 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-32-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/23106/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -144,7 +176,7 @@ Get: 32 http://deb.debian.org/debian trixie/main i386 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] -Fetched 11.4 MB in 0s (51.7 MB/s) +Fetched 11.4 MB in 0s (70.3 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19791 files and directories currently installed.) @@ -297,7 +329,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libdata-float-perl-0.014/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libdata-float-perl_0.014-1_source.changes +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libdata-float-perl-0.014/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libdata-float-perl_0.014-1_source.changes dpkg-buildpackage: info: source package libdata-float-perl dpkg-buildpackage: info: source version 0.014-1 dpkg-buildpackage: info: source distribution unstable @@ -319,13 +355,13 @@ Writing Makefile for Data::Float Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j22 + make -j10 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' cp lib/Data/Float.pm blib/lib/Data/Float.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' dh_auto_test - make -j22 test TEST_VERBOSE=1 + make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/class.t ...... @@ -1079,13 +1115,13 @@ ok 25 ok All tests successful. -Files=10, Tests=720, 2 wallclock secs ( 0.12 usr 0.02 sys + 1.14 cusr 0.10 csys = 1.38 CPU) +Files=10, Tests=720, 1 wallclock secs ( 0.08 usr 0.02 sys + 1.12 cusr 0.12 csys = 1.34 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libdata-float-perl-0.014' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libdata-float-perl/ - make -j22 install DESTDIR=/build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j10 install DESTDIR=/build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libdata-float-perl-0.014' Manifying 1 pod document Installing /build/reproducible-path/libdata-float-perl-0.014/debian/libdata-float-perl/usr/share/perl5/Data/Float.pm @@ -1112,12 +1148,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/31741/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/23106 and its subdirectories -I: Current time: Tue May 5 11:51:31 -12 2026 -I: pbuilder-time-stamp: 1778025091 +I: removing directory /srv/workspace/pbuilder/31741 and its subdirectories +I: Current time: Thu Apr 3 07:29:05 +14 2025 +I: pbuilder-time-stamp: 1743614945 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libdata-float-perl_0.014-1.diff: 67.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libdata-float-perl_0.014-1.diff.gz b2/build.log: 75.8% -- replaced with stdout Compressing the 1st log... b1/build.log: 76.3% -- replaced with stdout Wed Apr 2 17:29:07 UTC 2025 I: diffoscope 293 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libdata-float-perl_trixie_i386_1743614947 + touch /var/log/reproducible-builds/diffoscope_stamp_libdata-float-perl_trixie_i386_1743614947 + RESULT=0 + systemd-run '--description=diffoscope on libdata-float-perl/0.014-1 in trixie/i386' --slice=rb-build-diffoscope.slice -u rb-diffoscope-i386_10-49676 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad --run-session -c jenkins-reproducible-trixie-diffoscope-c9a0eb39-4a65-4846-9bf9-96844d578222 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/dbd-tmp-sAVwJNJ ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/libdata-float-perl_0.014-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/libdata-float-perl_0.014-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/libdata-float-perl_0.014-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1/libdata-float-perl_0.014-1_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2/libdata-float-perl_0.014-1_i386.changes' + false + set +x Running as unit: rb-diffoscope-i386_10-49676.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/libdata-float-perl_0.014-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/libdata-float-perl_0.014-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/libdata-float-perl_0.014-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b1/libdata-float-perl_0.014-1_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.Z5OtCfad/b2/libdata-float-perl_0.014-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 218ms CPU time consumed: 219ms _ _ _ _ _ __ _ _ | (_) |__ __| | __ _| |_ __ _ / _| | ___ __ _| |_ _ __ ___ | | | '_ \ / _` |/ _` | __/ _` |_____| |_| |/ _ \ / _` | __|____| '_ \ / _ \ | | | |_) | (_| | (_| | || (_| |_____| _| | (_) | (_| | ||_____| |_) | __/ |_|_|_.__/ \__,_|\__,_|\__\__,_| |_| |_|\___/ \__,_|\__| | .__/ \___| |_| _ _ __| | | '__| | | | | | |_| |_| Wed Apr 2 17:29:08 UTC 2025 I: diffoscope 293 found no differences in the changes files, and a .buildinfo file also exists. Wed Apr 2 17:29:08 UTC 2025 I: libdata-float-perl from trixie built successfully and reproducibly on i386. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-02 17:29:08] INFO: Starting at 2025-04-02 17:29:08.974983 [2025-04-02 17:29:09] INFO: Generating the pages of 1 package(s) [2025-04-02 17:29:09] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/i386/libdata-float-perl didn't produce a buildlog, even though it has been built. [2025-04-02 17:29:09] INFO: Finished at 2025-04-02 17:29:09.399176, took: 0:00:00.424197 Wed Apr 2 17:29:09 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/i386/libdata-float-perl.html Wed Apr 2 17:29:09 UTC 2025 I: Submitting .buildinfo files to external archives: Wed Apr 2 17:29:09 UTC 2025 I: Submitting 8.0K b1/libdata-float-perl_0.014-1_i386.buildinfo.asc https://buildinfo.debian.net/a587bf6aa8c8912316d57bc99f2c1805baaf39ab/libdata-float-perl_0.014-1_all Wed Apr 2 17:29:10 UTC 2025 I: Submitting 8.0K b2/libdata-float-perl_0.014-1_i386.buildinfo.asc https://buildinfo.debian.net/ee62f46686d5b0679a281e0e4532e2c4b7d05d78/libdata-float-perl_0.014-1_all Wed Apr 2 17:29:12 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Apr 2 17:29:12 UTC 2025 I: Done submitting .buildinfo files. Wed Apr 2 17:29:12 UTC 2025 I: Removing signed libdata-float-perl_0.014-1_i386.buildinfo.asc files: removed './b1/libdata-float-perl_0.014-1_i386.buildinfo.asc' removed './b2/libdata-float-perl_0.014-1_i386.buildinfo.asc' 1743614952 i386 trixie libdata-float-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdata-float-perl_0.014-1.rbuild.log: 73.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libdata-float-perl_0.014-1.rbuild.log.gz [2025-04-02 17:29:12] INFO: Starting at 2025-04-02 17:29:12.483403 [2025-04-02 17:29:12] INFO: Generating the pages of 1 package(s) [2025-04-02 17:29:12] INFO: Finished at 2025-04-02 17:29:12.898678, took: 0:00:00.415281 All cleanup done. Wed Apr 2 17:29:12 UTC 2025 - total duration: 0h 1m 30s. Wed Apr 2 17:29:12 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-SjHCpvWO, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 35.068s CPU time consumed: 6.669s