Running as unit: rb-build-i386_11-33717.service ==================================================================================== Thu Nov 21 12:36:29 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_11) on jenkins, called using "ionos6-i386 ionos2-i386" as arguments. Thu Nov 21 12:36:29 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-9QuUXRB1" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 12:36:29 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos6-i386.debian.net is marked as down. Thu Nov 21 12:36:29 UTC 2024 - checking via ssh if ionos6-i386.debian.net is up. removed '/tmp/read-only-fs-test-oszIUg' Thu Nov 21 12:36:30 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Thu Nov 21 12:36:30 UTC 2024 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-uHKIqI' ok, let's check if libtrue-perl is building anywhere yet… ok, libtrue-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libtrue-perl in unstable on i386 on jenkins now. 1st build will be done on ionos6-i386.debian.net. 2nd build will be done on ionos2-i386.debian.net. ============================================================================= Thu Nov 21 12:36:50 UTC 2024 I: starting to build libtrue-perl/unstable/i386 on jenkins on '2024-11-21 12:36' Thu Nov 21 12:36:50 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_11/33717/console.log 1732192610 i386 unstable libtrue-perl Thu Nov 21 12:36:50 UTC 2024 I: Downloading source for unstable/libtrue-perl=1.0.2-2 --2024-11-21 12:36:50-- http://deb.debian.org/debian/pool/main/libt/libtrue-perl/libtrue-perl_1.0.2-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2271 (2.2K) [text/prs.lines.tag] Saving to: ‘libtrue-perl_1.0.2-2.dsc’ 0K .. 100% 315M=0s 2024-11-21 12:36:50 (315 MB/s) - ‘libtrue-perl_1.0.2-2.dsc’ saved [2271/2271] --2024-11-21 12:36:50-- http://deb.debian.org/debian/pool/main/libt/libtrue-perl/libtrue-perl_1.0.2-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2271 (2.2K) [text/prs.lines.tag] Saving to: ‘libtrue-perl_1.0.2-2.dsc’ 0K .. 100% 315M=0s 2024-11-21 12:36:50 (315 MB/s) - ‘libtrue-perl_1.0.2-2.dsc’ saved [2271/2271] Thu Nov 21 12:36:50 UTC 2024 I: libtrue-perl_1.0.2-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libtrue-perl Binary: libtrue-perl Architecture: any Version: 1.0.2-2 Maintainer: Debian Perl Group Uploaders: Ivan Kohler Homepage: https://metacpan.org/release/true Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libtrue-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libb-hooks-op-annotation-perl, libb-hooks-op-check-perl (>= 0.22), libdevel-stacktrace-perl , libextutils-depends-perl, libfunction-parameters-perl , libmoo-perl (>= 2.003004) , libtest-pod-perl , perl-xs-dev, perl:native Package-List: libtrue-perl deb perl optional arch=any Checksums-Sha1: f6b9e6d9258d7a3e595fabf05e4102f61103fa90 129037 libtrue-perl_1.0.2.orig.tar.gz 073c7bed7bcc7e97a564cda678c2dcf9268bab9e 5908 libtrue-perl_1.0.2-2.debian.tar.xz Checksums-Sha256: 6a1ccd4008d4cc66ded4e2a1694b5b2a21d7655e276e1354160012ba2be2a284 129037 libtrue-perl_1.0.2.orig.tar.gz c310edeb74b4dd7fa85794b483b71419b9bbd7d5e7c20496f04a812966211685 5908 libtrue-perl_1.0.2-2.debian.tar.xz Files: 15fda94d9fe1cfe907b81361f21e1552 129037 libtrue-perl_1.0.2.orig.tar.gz e540e41991c2959cbf5893e64ded3fae 5908 libtrue-perl_1.0.2-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKR/LkACgkQV5wWDUye I+iXaQ//fpXdMj+rkFY5qrN2eA6UOwkyhu3gt3khiHmPw4swU8G+evhWh1JwSo+t QAnqhrPMVJsDb3dEaExfaWjQbIUA9jqnX4RZimaCtF3w1hnjKMtmvBRCZr8E41Co efpE0i+xTUpWriPK7A/f4pLGid7hJfijVop5QhTKY1Au2Tt5/C6LBrLDgawiSzj6 fNZ0kvRW5ISg2oeex6VAG4xxgfG7M/vVKTPyhigG4jaAR1Fkce+OXv18uwJvkocY IIK/eI025cPyPfIilicnfKUPYohv0cqEQHLdxzgLWUfK/0XfXIVsJstbGm2+vZms PrM5OnNLGpbjgtRQpK+ofeoC88X3m3/ScQkdqPhkfWOAnrkl0u6E0g6Ma0sOIVAa ohZPRBsM4Wla5CM5AZxebRgWhYnhum4ByKGtUpHfxec+ewrkDXyPiWaOatw9BsUs FqCpyvAJDymENewNutMnml4q5SAg+o5kZr0w0UvI4wtlMdobEB2CiPL31bA+67qV amUHQXNVCjY8qmyB+aXOXEBsSozWnKvTZgDukj/oS/ztDwddgDTZ8UzIYeM+Aies h5dFggw5XcwVaci9dna+k/zDnNkZti50vW5vx+EQrpEkSBlEVFuvdqaycNfGhah7 ip+JM5cxCFSN4oObuhvxXbzOPwuMOD2x79z5qEZxvsuVRM5wYvU= =KLbr -----END PGP SIGNATURE----- Thu Nov 21 12:36:50 UTC 2024 I: Checking whether the package is not for us Thu Nov 21 12:36:50 UTC 2024 I: Starting 1st build on remote node ionos6-i386.debian.net. Thu Nov 21 12:36:50 UTC 2024 I: Preparing to do remote build '1' on ionos6-i386.debian.net. Thu Nov 21 12:36:50 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos6-i386.debian.net is marked as down. Thu Nov 21 12:36:50 UTC 2024 - checking via ssh if ionos6-i386.debian.net is up. removed '/tmp/read-only-fs-test-rGPPzP' ==================================================================================== Wed Dec 24 18:59:51 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos6-i386, called using "1 libtrue-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH 1.0.2-2" as arguments. Wed Dec 24 18:59:51 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-Te2U2Nsx" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Dec 24 18:59:51 UTC 2025 I: Downloading source for unstable/libtrue-perl=1.0.2-2 Reading package lists... NOTICE: 'libtrue-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 137 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (dsc) [2271 B] Get:2 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (tar) [129 kB] Get:3 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (diff) [5908 B] Fetched 137 kB in 0s (4565 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libtrue-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 137 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (dsc) [2271 B] Get:2 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (tar) [129 kB] Get:3 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (diff) [5908 B] Fetched 137 kB in 0s (4565 kB/s) Download complete and in download only mode ============================================================================= Building libtrue-perl in unstable on i386 on ionos6-i386 now. Date: Wed Dec 24 19:59:51 CET 2025 Date UTC: Wed Dec 24 18:59:51 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 24 06:59:52 -12 2025 I: pbuilder-time-stamp: 1766602792 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libtrue-perl_1.0.2-2.dsc] I: copying [./libtrue-perl_1.0.2.orig.tar.gz] I: copying [./libtrue-perl_1.0.2-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat May 28 10:43:05 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtrue-perl_1.0.2-2.dsc: no acceptable signature found dpkg-source: info: extracting libtrue-perl in libtrue-perl-1.0.2 dpkg-source: info: unpacking libtrue-perl_1.0.2.orig.tar.gz dpkg-source: info: unpacking libtrue-perl_1.0.2-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/14853/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='i386' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='14853' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_lCRc --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1 --logfile b1/build.log libtrue-perl_1.0.2-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/sbin/chroot' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos6-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/14853/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libb-hooks-op-annotation-perl, libb-hooks-op-check-perl (>= 0.22), libdevel-stacktrace-perl, libextutils-depends-perl, libfunction-parameters-perl, libmoo-perl (>= 2.003004), libtest-pod-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19952 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libb-hooks-op-annotation-perl; however: Package libb-hooks-op-annotation-perl is not installed. pbuilder-satisfydepends-dummy depends on libb-hooks-op-check-perl (>= 0.22); however: Package libb-hooks-op-check-perl is not installed. pbuilder-satisfydepends-dummy depends on libdevel-stacktrace-perl; however: Package libdevel-stacktrace-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-depends-perl; however: Package libextutils-depends-perl is not installed. pbuilder-satisfydepends-dummy depends on libfunction-parameters-perl; however: Package libfunction-parameters-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl (>= 2.003004); however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libb-hooks-op-annotation-perl{a} libb-hooks-op-check-perl{a} libclass-method-modifiers-perl{a} libclass-xsaccessor-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdevel-stacktrace-perl{a} libdynaloader-functions-perl{a} libelf1t64{a} libextutils-depends-perl{a} libfile-stripnondeterminism-perl{a} libfunction-parameters-perl{a} libicu72{a} libimport-into-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-runtime-perl{a} libmoo-perl{a} libparams-classify-perl{a} libperl-dev{a} libpipeline1{a} librole-tiny-perl{a} libsub-quote-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libnamespace-clean-perl libxstring-perl lynx wget 0 packages upgraded, 46 newly installed, 0 to remove and 0 not upgraded. Need to get 21.7 MB of archives. After unpacking 81.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian unstable/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian unstable/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian unstable/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian unstable/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian unstable/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian unstable/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian unstable/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian unstable/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian unstable/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian unstable/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian unstable/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian unstable/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian unstable/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian unstable/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main i386 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian unstable/main i386 libb-hooks-op-annotation-perl i386 0.44-3+b4 [14.0 kB] Get: 32 http://deb.debian.org/debian unstable/main i386 libb-hooks-op-check-perl i386 0.22-3+b2 [10.7 kB] Get: 33 http://deb.debian.org/debian unstable/main i386 libclass-method-modifiers-perl all 2.15-1 [18.0 kB] Get: 34 http://deb.debian.org/debian unstable/main i386 libclass-xsaccessor-perl i386 1.19-4+b4 [37.5 kB] Get: 35 http://deb.debian.org/debian unstable/main i386 libdynaloader-functions-perl all 0.004-1 [12.1 kB] Get: 36 http://deb.debian.org/debian unstable/main i386 libdevel-callchecker-perl i386 0.009-1+b1 [16.2 kB] Get: 37 http://deb.debian.org/debian unstable/main i386 libdevel-stacktrace-perl all 2.0500-1 [26.4 kB] Get: 38 http://deb.debian.org/debian unstable/main i386 libfunction-parameters-perl i386 2.002004-1+b3 [60.2 kB] Get: 39 http://deb.debian.org/debian unstable/main i386 libparams-classify-perl i386 0.015-2+b4 [23.1 kB] Get: 40 http://deb.debian.org/debian unstable/main i386 libmodule-runtime-perl all 0.016-2 [19.6 kB] Get: 41 http://deb.debian.org/debian unstable/main i386 libimport-into-perl all 1.002005-2 [11.3 kB] Get: 42 http://deb.debian.org/debian unstable/main i386 librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 43 http://deb.debian.org/debian unstable/main i386 libsub-quote-perl all 2.006008-1 [21.8 kB] Get: 44 http://deb.debian.org/debian unstable/main i386 libmoo-perl all 2.005005-1 [58.0 kB] Get: 45 http://deb.debian.org/debian unstable/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Get: 46 http://deb.debian.org/debian unstable/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 21.7 MB in 0s (90.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19952 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libextutils-depends-perl. Preparing to unpack .../29-libextutils-depends-perl_0.8001-2_all.deb ... Unpacking libextutils-depends-perl (0.8001-2) ... Selecting previously unselected package libb-hooks-op-annotation-perl. Preparing to unpack .../30-libb-hooks-op-annotation-perl_0.44-3+b4_i386.deb ... Unpacking libb-hooks-op-annotation-perl (0.44-3+b4) ... Selecting previously unselected package libb-hooks-op-check-perl:i386. Preparing to unpack .../31-libb-hooks-op-check-perl_0.22-3+b2_i386.deb ... Unpacking libb-hooks-op-check-perl:i386 (0.22-3+b2) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../32-libclass-method-modifiers-perl_2.15-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.15-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../33-libclass-xsaccessor-perl_1.19-4+b4_i386.deb ... Unpacking libclass-xsaccessor-perl (1.19-4+b4) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../34-libdynaloader-functions-perl_0.004-1_all.deb ... Unpacking libdynaloader-functions-perl (0.004-1) ... Selecting previously unselected package libdevel-callchecker-perl:i386. Preparing to unpack .../35-libdevel-callchecker-perl_0.009-1+b1_i386.deb ... Unpacking libdevel-callchecker-perl:i386 (0.009-1+b1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../36-libdevel-stacktrace-perl_2.0500-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0500-1) ... Selecting previously unselected package libfunction-parameters-perl. Preparing to unpack .../37-libfunction-parameters-perl_2.002004-1+b3_i386.deb ... Unpacking libfunction-parameters-perl (2.002004-1+b3) ... Selecting previously unselected package libparams-classify-perl:i386. Preparing to unpack .../38-libparams-classify-perl_0.015-2+b4_i386.deb ... Unpacking libparams-classify-perl:i386 (0.015-2+b4) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../39-libmodule-runtime-perl_0.016-2_all.deb ... Unpacking libmodule-runtime-perl (0.016-2) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../40-libimport-into-perl_1.002005-2_all.deb ... Unpacking libimport-into-perl (1.002005-2) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../41-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../42-libsub-quote-perl_2.006008-1_all.deb ... Unpacking libsub-quote-perl (2.006008-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../43-libmoo-perl_2.005005-1_all.deb ... Unpacking libmoo-perl (2.005005-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../44-libperl-dev_5.40.0-7_i386.deb ... Unpacking libperl-dev:i386 (5.40.0-7) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../45-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libdynaloader-functions-perl (0.004-1) ... Setting up libclass-method-modifiers-perl (2.15-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:i386 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libextutils-depends-perl (0.8001-2) ... Setting up autotools-dev (20220109.1) ... Setting up libfunction-parameters-perl (2.002004-1+b3) ... Setting up autopoint (0.22.5-2) ... Setting up libb-hooks-op-check-perl:i386 (0.22-3+b2) ... Setting up libb-hooks-op-annotation-perl (0.44-3+b4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-quote-perl (2.006008-1) ... Setting up libdevel-stacktrace-perl (2.0500-1) ... Setting up libclass-xsaccessor-perl (1.19-4+b4) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libdevel-callchecker-perl:i386 (0.009-1+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl:i386 (0.015-2+b4) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libmodule-runtime-perl (0.016-2) ... Setting up libimport-into-perl (1.002005-2) ... Setting up libmoo-perl (2.005005-1) ... Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libtrue-perl-1.0.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtrue-perl_1.0.2-2_source.changes dpkg-buildpackage: info: source package libtrue-perl dpkg-buildpackage: info: source version 1.0.2-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Debian Janitor dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for true Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' Running Mkbootstrap for true () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' true.xs > true.xsc chmod 644 "true.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 cp lib/true.pm blib/lib/true.pm cp lib/true/VERSION.pm blib/lib/true/VERSION.pm mv true.xsc true.c i686-linux-gnu-gcc -c -I/usr/lib/i386-linux-gnu/perl5/5.40/B/Hooks/OP/Annotation/Install -I/usr/lib/i386-linux-gnu/perl5/5.40/B/Hooks/OP/Check/Install -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"v1.0.2\" -DXS_VERSION=\"v1.0.2\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" true.c rm -f blib/arch/auto/true/true.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong true.o -o blib/arch/auto/true/true.so \ \ chmod 755 blib/arch/auto/true/true.so Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_compile.t ........ 1..1 ok 1 - use true; ok t/eval.t .............. 1..4 ok 1 - direct: true doesn't affect non-require evals ok 2 - direct: no eval error ok 3 - indirect: true doesn't affect non-require evals ok 4 - indirect: no eval error ok t/exception.t ......... 1..4 # Subtest: Good ok 1 - use: Good using true ok 2 - use: Good loaded OK 1..2 ok 1 - Good # Subtest: DirectCompileTimeException ok 1 - direct: module throws a compile-time exception # TODO don't clean after itself yet not ok 2 - direct: true cleans up correctly # TODO don't clean after itself yet # Failed (TODO) test 'direct: true cleans up correctly' # at t/exception.t line 24. # Structures begin differing at: # $got->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = '1' # $expected->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = Does not exist 1..2 ok 2 - DirectCompileTimeException # Subtest: IndirectCompileTimeException ok 1 - indirect: module throws a compile-time exception # TODO don't clean after itself yet not ok 2 - direct: true cleans up correctly # TODO don't clean after itself yet # Failed (TODO) test 'direct: true cleans up correctly' # at t/exception.t line 32. # Structures begin differing at: # $got->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = '1' # $expected->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = Does not exist 1..2 ok 3 - IndirectCompileTimeException # Subtest: Ugly ok 1 - use: Ugly using true ok 2 - use: Ugly loaded OK 1..2 ok 4 - Ugly ok t/leak.t .............. 1..6 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - leak (direct): true doesn't leak into a module that doesn't use it ok 4 - leak (indirect): true doesn't leak into a module that doesn't use it ok 5 - use: Ugly using true ok 6 - use: Ugly loaded OK ok t/require.t ........... 1..6 ok 1 - require: module using true ok 2 - require: module loaded OK ok 3 - require: module not using true ok 4 - require: script using true ok 5 - require: script loaded OK ok 6 - require: script not using true ok t/require_subclass.t .. 1..14 ok 1 - require: module using true ok 2 - require: module loaded OK ok 3 - require: module using true ok 4 - require: module loaded OK ok 5 - require: module using true ok 6 - require: module loaded OK ok 7 - require: module using true ok 8 - require: module loaded OK ok 9 - require: module not using true ok 10 - require: script using true ok 11 - require: script loaded OK ok 12 - require: script using true ok 13 - require: script loaded OK ok 14 - require: script not using true ok t/rt-124745.t ......... 1..2 ok 1 - Moo(se)::with: module using Moo::Role and Function::Parameters ok 2 - require: module loaded OK ok t/unimport.t .......... 1..8 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - use: direct top-level unimport works ok 4 - use: direct nested unimport works ok 5 - use: indirect top-level unimport works ok 6 - use: indirect nested unimport works ok 7 - use: Ugly using true ok 8 - use: Ugly loaded OK ok t/use.t ............... 1..5 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - use: module not using true ok 4 - use: Ugly using true ok 5 - use: Ugly loaded OK ok t/use_subclass.t ...... 1..9 ok 1 - use: GoodWithSubclass using true ok 2 - use: GoodWithSubclass loaded OK ok 3 - use: GoodWithSubSubclass using true ok 4 - use: GoodWithSubSubclass loaded OK ok 5 - use: module not using true ok 6 - use: UglyWithSubclass using true ok 7 - use: UglWithSubclass loaded OK ok 8 - use: UglyWithSubSubclass using true ok 9 - use: UglyWithSubSubclass loaded OK ok t/version.t ........... 1..3 ok 1 - require true::VERSION; ok 2 - true::VERSION exists ok 3 - same $VERSION as true ok All tests successful. Files=11, Tests=62, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.80 cusr 0.08 csys = 0.94 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtrue-perl/ make -j22 install DESTDIR=/build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/true/true.so Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true/VERSION.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true::VERSION.3pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true.3pm make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtrue-perl' in '../libtrue-perl_1.0.2-2_i386.deb'. dpkg-deb: building package 'libtrue-perl-dbgsym' in '../libtrue-perl-dbgsym_1.0.2-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libtrue-perl_1.0.2-2_i386.buildinfo dpkg-genchanges --build=binary -O../libtrue-perl_1.0.2-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/14853 and its subdirectories I: Current time: Wed Dec 24 07:00:12 -12 2025 I: pbuilder-time-stamp: 1766602812 Wed Dec 24 19:00:12 UTC 2025 I: Signing ./b1/libtrue-perl_1.0.2-2_i386.buildinfo as libtrue-perl_1.0.2-2_i386.buildinfo.asc Wed Dec 24 19:00:12 UTC 2025 I: Signed ./b1/libtrue-perl_1.0.2-2_i386.buildinfo as ./b1/libtrue-perl_1.0.2-2_i386.buildinfo.asc Wed Dec 24 19:00:12 UTC 2025 - build #1 for libtrue-perl/unstable/i386 on ionos6-i386 done. Starting cleanup. All cleanup done. Wed Dec 24 19:00:12 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-Te2U2Nsx, removing. /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 12:37 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 12:36 b2 -rw-r--r-- 1 jenkins jenkins 2271 May 28 2022 libtrue-perl_1.0.2-2.dsc -rw------- 1 jenkins jenkins 3405 Nov 21 12:36 rbuildlog.Mvu454A /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1: total 116 -rw-r--r-- 1 jenkins jenkins 32721 Nov 21 12:37 build.log -rw-r--r-- 1 jenkins jenkins 31768 Nov 21 12:37 libtrue-perl-dbgsym_1.0.2-2_i386.deb -rw-r--r-- 1 jenkins jenkins 5908 Nov 21 12:37 libtrue-perl_1.0.2-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2271 Nov 21 12:37 libtrue-perl_1.0.2-2.dsc -rw-r--r-- 1 jenkins jenkins 5585 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 6467 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1457 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.changes -rw-r--r-- 1 jenkins jenkins 15964 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1303 Nov 21 12:37 libtrue-perl_1.0.2-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2: total 0 Thu Nov 21 12:37:13 UTC 2024 I: Deleting $TMPDIR on ionos6-i386.debian.net. W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build I: Current time: Wed Dec 24 06:59:52 -12 2025 I: pbuilder-time-stamp: 1766602792 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libtrue-perl_1.0.2-2.dsc] I: copying [./libtrue-perl_1.0.2.orig.tar.gz] I: copying [./libtrue-perl_1.0.2-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat May 28 10:43:05 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtrue-perl_1.0.2-2.dsc: no acceptable signature found dpkg-source: info: extracting libtrue-perl in libtrue-perl-1.0.2 dpkg-source: info: unpacking libtrue-perl_1.0.2.orig.tar.gz dpkg-source: info: unpacking libtrue-perl_1.0.2-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/14853/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='i386' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='14853' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_lCRc --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1 --logfile b1/build.log libtrue-perl_1.0.2-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/sbin/chroot' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos6-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/14853/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libb-hooks-op-annotation-perl, libb-hooks-op-check-perl (>= 0.22), libdevel-stacktrace-perl, libextutils-depends-perl, libfunction-parameters-perl, libmoo-perl (>= 2.003004), libtest-pod-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19952 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libb-hooks-op-annotation-perl; however: Package libb-hooks-op-annotation-perl is not installed. pbuilder-satisfydepends-dummy depends on libb-hooks-op-check-perl (>= 0.22); however: Package libb-hooks-op-check-perl is not installed. pbuilder-satisfydepends-dummy depends on libdevel-stacktrace-perl; however: Package libdevel-stacktrace-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-depends-perl; however: Package libextutils-depends-perl is not installed. pbuilder-satisfydepends-dummy depends on libfunction-parameters-perl; however: Package libfunction-parameters-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl (>= 2.003004); however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libb-hooks-op-annotation-perl{a} libb-hooks-op-check-perl{a} libclass-method-modifiers-perl{a} libclass-xsaccessor-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdevel-stacktrace-perl{a} libdynaloader-functions-perl{a} libelf1t64{a} libextutils-depends-perl{a} libfile-stripnondeterminism-perl{a} libfunction-parameters-perl{a} libicu72{a} libimport-into-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-runtime-perl{a} libmoo-perl{a} libparams-classify-perl{a} libperl-dev{a} libpipeline1{a} librole-tiny-perl{a} libsub-quote-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libnamespace-clean-perl libxstring-perl lynx wget 0 packages upgraded, 46 newly installed, 0 to remove and 0 not upgraded. Need to get 21.7 MB of archives. After unpacking 81.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian unstable/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian unstable/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian unstable/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian unstable/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian unstable/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian unstable/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian unstable/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian unstable/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian unstable/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian unstable/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian unstable/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian unstable/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian unstable/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian unstable/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main i386 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian unstable/main i386 libb-hooks-op-annotation-perl i386 0.44-3+b4 [14.0 kB] Get: 32 http://deb.debian.org/debian unstable/main i386 libb-hooks-op-check-perl i386 0.22-3+b2 [10.7 kB] Get: 33 http://deb.debian.org/debian unstable/main i386 libclass-method-modifiers-perl all 2.15-1 [18.0 kB] Get: 34 http://deb.debian.org/debian unstable/main i386 libclass-xsaccessor-perl i386 1.19-4+b4 [37.5 kB] Get: 35 http://deb.debian.org/debian unstable/main i386 libdynaloader-functions-perl all 0.004-1 [12.1 kB] Get: 36 http://deb.debian.org/debian unstable/main i386 libdevel-callchecker-perl i386 0.009-1+b1 [16.2 kB] Get: 37 http://deb.debian.org/debian unstable/main i386 libdevel-stacktrace-perl all 2.0500-1 [26.4 kB] Get: 38 http://deb.debian.org/debian unstable/main i386 libfunction-parameters-perl i386 2.002004-1+b3 [60.2 kB] Get: 39 http://deb.debian.org/debian unstable/main i386 libparams-classify-perl i386 0.015-2+b4 [23.1 kB] Get: 40 http://deb.debian.org/debian unstable/main i386 libmodule-runtime-perl all 0.016-2 [19.6 kB] Get: 41 http://deb.debian.org/debian unstable/main i386 libimport-into-perl all 1.002005-2 [11.3 kB] Get: 42 http://deb.debian.org/debian unstable/main i386 librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 43 http://deb.debian.org/debian unstable/main i386 libsub-quote-perl all 2.006008-1 [21.8 kB] Get: 44 http://deb.debian.org/debian unstable/main i386 libmoo-perl all 2.005005-1 [58.0 kB] Get: 45 http://deb.debian.org/debian unstable/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Get: 46 http://deb.debian.org/debian unstable/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 21.7 MB in 0s (90.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19952 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libextutils-depends-perl. Preparing to unpack .../29-libextutils-depends-perl_0.8001-2_all.deb ... Unpacking libextutils-depends-perl (0.8001-2) ... Selecting previously unselected package libb-hooks-op-annotation-perl. Preparing to unpack .../30-libb-hooks-op-annotation-perl_0.44-3+b4_i386.deb ... Unpacking libb-hooks-op-annotation-perl (0.44-3+b4) ... Selecting previously unselected package libb-hooks-op-check-perl:i386. Preparing to unpack .../31-libb-hooks-op-check-perl_0.22-3+b2_i386.deb ... Unpacking libb-hooks-op-check-perl:i386 (0.22-3+b2) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../32-libclass-method-modifiers-perl_2.15-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.15-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../33-libclass-xsaccessor-perl_1.19-4+b4_i386.deb ... Unpacking libclass-xsaccessor-perl (1.19-4+b4) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../34-libdynaloader-functions-perl_0.004-1_all.deb ... Unpacking libdynaloader-functions-perl (0.004-1) ... Selecting previously unselected package libdevel-callchecker-perl:i386. Preparing to unpack .../35-libdevel-callchecker-perl_0.009-1+b1_i386.deb ... Unpacking libdevel-callchecker-perl:i386 (0.009-1+b1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../36-libdevel-stacktrace-perl_2.0500-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0500-1) ... Selecting previously unselected package libfunction-parameters-perl. Preparing to unpack .../37-libfunction-parameters-perl_2.002004-1+b3_i386.deb ... Unpacking libfunction-parameters-perl (2.002004-1+b3) ... Selecting previously unselected package libparams-classify-perl:i386. Preparing to unpack .../38-libparams-classify-perl_0.015-2+b4_i386.deb ... Unpacking libparams-classify-perl:i386 (0.015-2+b4) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../39-libmodule-runtime-perl_0.016-2_all.deb ... Unpacking libmodule-runtime-perl (0.016-2) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../40-libimport-into-perl_1.002005-2_all.deb ... Unpacking libimport-into-perl (1.002005-2) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../41-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../42-libsub-quote-perl_2.006008-1_all.deb ... Unpacking libsub-quote-perl (2.006008-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../43-libmoo-perl_2.005005-1_all.deb ... Unpacking libmoo-perl (2.005005-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../44-libperl-dev_5.40.0-7_i386.deb ... Unpacking libperl-dev:i386 (5.40.0-7) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../45-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libdynaloader-functions-perl (0.004-1) ... Setting up libclass-method-modifiers-perl (2.15-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:i386 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libextutils-depends-perl (0.8001-2) ... Setting up autotools-dev (20220109.1) ... Setting up libfunction-parameters-perl (2.002004-1+b3) ... Setting up autopoint (0.22.5-2) ... Setting up libb-hooks-op-check-perl:i386 (0.22-3+b2) ... Setting up libb-hooks-op-annotation-perl (0.44-3+b4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-quote-perl (2.006008-1) ... Setting up libdevel-stacktrace-perl (2.0500-1) ... Setting up libclass-xsaccessor-perl (1.19-4+b4) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libdevel-callchecker-perl:i386 (0.009-1+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl:i386 (0.015-2+b4) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libmodule-runtime-perl (0.016-2) ... Setting up libimport-into-perl (1.002005-2) ... Setting up libmoo-perl (2.005005-1) ... Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libtrue-perl-1.0.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtrue-perl_1.0.2-2_source.changes dpkg-buildpackage: info: source package libtrue-perl dpkg-buildpackage: info: source version 1.0.2-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Debian Janitor dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for true Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' Running Mkbootstrap for true () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' true.xs > true.xsc chmod 644 "true.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 cp lib/true.pm blib/lib/true.pm cp lib/true/VERSION.pm blib/lib/true/VERSION.pm mv true.xsc true.c i686-linux-gnu-gcc -c -I/usr/lib/i386-linux-gnu/perl5/5.40/B/Hooks/OP/Annotation/Install -I/usr/lib/i386-linux-gnu/perl5/5.40/B/Hooks/OP/Check/Install -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"v1.0.2\" -DXS_VERSION=\"v1.0.2\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" true.c rm -f blib/arch/auto/true/true.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong true.o -o blib/arch/auto/true/true.so \ \ chmod 755 blib/arch/auto/true/true.so Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_compile.t ........ 1..1 ok 1 - use true; ok t/eval.t .............. 1..4 ok 1 - direct: true doesn't affect non-require evals ok 2 - direct: no eval error ok 3 - indirect: true doesn't affect non-require evals ok 4 - indirect: no eval error ok t/exception.t ......... 1..4 # Subtest: Good ok 1 - use: Good using true ok 2 - use: Good loaded OK 1..2 ok 1 - Good # Subtest: DirectCompileTimeException ok 1 - direct: module throws a compile-time exception # TODO don't clean after itself yet not ok 2 - direct: true cleans up correctly # TODO don't clean after itself yet # Failed (TODO) test 'direct: true cleans up correctly' # at t/exception.t line 24. # Structures begin differing at: # $got->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = '1' # $expected->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = Does not exist 1..2 ok 2 - DirectCompileTimeException # Subtest: IndirectCompileTimeException ok 1 - indirect: module throws a compile-time exception # TODO don't clean after itself yet not ok 2 - direct: true cleans up correctly # TODO don't clean after itself yet # Failed (TODO) test 'direct: true cleans up correctly' # at t/exception.t line 32. # Structures begin differing at: # $got->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = '1' # $expected->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = Does not exist 1..2 ok 3 - IndirectCompileTimeException # Subtest: Ugly ok 1 - use: Ugly using true ok 2 - use: Ugly loaded OK 1..2 ok 4 - Ugly ok t/leak.t .............. 1..6 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - leak (direct): true doesn't leak into a module that doesn't use it ok 4 - leak (indirect): true doesn't leak into a module that doesn't use it ok 5 - use: Ugly using true ok 6 - use: Ugly loaded OK ok t/require.t ........... 1..6 ok 1 - require: module using true ok 2 - require: module loaded OK ok 3 - require: module not using true ok 4 - require: script using true ok 5 - require: script loaded OK ok 6 - require: script not using true ok t/require_subclass.t .. 1..14 ok 1 - require: module using true ok 2 - require: module loaded OK ok 3 - require: module using true ok 4 - require: module loaded OK ok 5 - require: module using true ok 6 - require: module loaded OK ok 7 - require: module using true ok 8 - require: module loaded OK ok 9 - require: module not using true ok 10 - require: script using true ok 11 - require: script loaded OK ok 12 - require: script using true ok 13 - require: script loaded OK ok 14 - require: script not using true ok t/rt-124745.t ......... 1..2 ok 1 - Moo(se)::with: module using Moo::Role and Function::Parameters ok 2 - require: module loaded OK ok t/unimport.t .......... 1..8 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - use: direct top-level unimport works ok 4 - use: direct nested unimport works ok 5 - use: indirect top-level unimport works ok 6 - use: indirect nested unimport works ok 7 - use: Ugly using true ok 8 - use: Ugly loaded OK ok t/use.t ............... 1..5 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - use: module not using true ok 4 - use: Ugly using true ok 5 - use: Ugly loaded OK ok t/use_subclass.t ...... 1..9 ok 1 - use: GoodWithSubclass using true ok 2 - use: GoodWithSubclass loaded OK ok 3 - use: GoodWithSubSubclass using true ok 4 - use: GoodWithSubSubclass loaded OK ok 5 - use: module not using true ok 6 - use: UglyWithSubclass using true ok 7 - use: UglWithSubclass loaded OK ok 8 - use: UglyWithSubSubclass using true ok 9 - use: UglyWithSubSubclass loaded OK ok t/version.t ........... 1..3 ok 1 - require true::VERSION; ok 2 - true::VERSION exists ok 3 - same $VERSION as true ok All tests successful. Files=11, Tests=62, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.80 cusr 0.08 csys = 0.94 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtrue-perl/ make -j22 install DESTDIR=/build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/true/true.so Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true/VERSION.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true::VERSION.3pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true.3pm make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtrue-perl' in '../libtrue-perl_1.0.2-2_i386.deb'. dpkg-deb: building package 'libtrue-perl-dbgsym' in '../libtrue-perl-dbgsym_1.0.2-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libtrue-perl_1.0.2-2_i386.buildinfo dpkg-genchanges --build=binary -O../libtrue-perl_1.0.2-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/14853 and its subdirectories I: Current time: Wed Dec 24 07:00:12 -12 2025 I: pbuilder-time-stamp: 1766602812 Thu Nov 21 12:37:13 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos2-i386.debian.net. Thu Nov 21 12:37:13 UTC 2024 I: Preparing to do remote build '2' on ionos2-i386.debian.net. Thu Nov 21 12:37:13 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Thu Nov 21 12:37:13 UTC 2024 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-F4jLGU' ==================================================================================== Thu Nov 21 12:37:15 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos2-i386, called using "2 libtrue-perl unstable /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH 1.0.2-2" as arguments. Thu Nov 21 12:37:15 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-nta81qVm" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Nov 21 12:37:15 UTC 2024 I: Downloading source for unstable/libtrue-perl=1.0.2-2 Reading package lists... NOTICE: 'libtrue-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 137 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (dsc) [2271 B] Get:2 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (tar) [129 kB] Get:3 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (diff) [5908 B] Fetched 137 kB in 0s (2603 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libtrue-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libtrue-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 137 kB of source archives. Get:1 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (dsc) [2271 B] Get:2 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (tar) [129 kB] Get:3 http://deb.debian.org/debian unstable/main libtrue-perl 1.0.2-2 (diff) [5908 B] Fetched 137 kB in 0s (2603 kB/s) Download complete and in download only mode ============================================================================= Re-Building libtrue-perl in unstable on i386 on ionos2-i386 now. Date: Thu Nov 21 13:37:15 CET 2024 Date UTC: Thu Nov 21 12:37:15 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_5AcK + case ${ARCH} in + let NUM_CPU-=3 + case $ARCH in + locale=de_CH + language=de + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libtrue-perl = debian-installer -o libtrue-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libtrue-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_5AcK --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2 --logfile b2/build.log libtrue-perl_1.0.2-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Fri Nov 22 02:37:15 +14 2024 I: pbuilder-time-stamp: 1732192635 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libtrue-perl_1.0.2-2.dsc] I: copying [./libtrue-perl_1.0.2.orig.tar.gz] I: copying [./libtrue-perl_1.0.2-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat May 28 10:43:05 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtrue-perl_1.0.2-2.dsc: no acceptable signature found dpkg-source: info: extracting libtrue-perl in libtrue-perl-1.0.2 dpkg-source: info: unpacking libtrue-perl_1.0.2.orig.tar.gz dpkg-source: info: unpacking libtrue-perl_1.0.2-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D01_modify_environment starting debug: Running on ionos2-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 21 12:37 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' DIRSTACK=() DISTRIBUTION=unstable EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=eda3b62d5dfe4e0ab943779723a5372b LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=7668 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_5AcK --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2 --logfile b2/build.log libtrue-perl_1.0.2-2.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libb-hooks-op-annotation-perl, libb-hooks-op-check-perl (>= 0.22), libdevel-stacktrace-perl, libextutils-depends-perl, libfunction-parameters-perl, libmoo-perl (>= 2.003004), libtest-pod-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19952 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libb-hooks-op-annotation-perl; however: Package libb-hooks-op-annotation-perl is not installed. pbuilder-satisfydepends-dummy depends on libb-hooks-op-check-perl (>= 0.22); however: Package libb-hooks-op-check-perl is not installed. pbuilder-satisfydepends-dummy depends on libdevel-stacktrace-perl; however: Package libdevel-stacktrace-perl is not installed. pbuilder-satisfydepends-dummy depends on libextutils-depends-perl; however: Package libextutils-depends-perl is not installed. pbuilder-satisfydepends-dummy depends on libfunction-parameters-perl; however: Package libfunction-parameters-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl (>= 2.003004); however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libb-hooks-op-annotation-perl{a} libb-hooks-op-check-perl{a} libclass-method-modifiers-perl{a} libclass-xsaccessor-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdevel-stacktrace-perl{a} libdynaloader-functions-perl{a} libelf1t64{a} libextutils-depends-perl{a} libfile-stripnondeterminism-perl{a} libfunction-parameters-perl{a} libicu72{a} libimport-into-perl{a} libmagic-mgc{a} libmagic1t64{a} libmodule-runtime-perl{a} libmoo-perl{a} libparams-classify-perl{a} libperl-dev{a} libpipeline1{a} librole-tiny-perl{a} libsub-quote-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libnamespace-clean-perl libxstring-perl lynx wget 0 packages upgraded, 46 newly installed, 0 to remove and 0 not upgraded. Need to get 21.7 MB of archives. After unpacking 81.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian unstable/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian unstable/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian unstable/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian unstable/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian unstable/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian unstable/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian unstable/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian unstable/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian unstable/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian unstable/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian unstable/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian unstable/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian unstable/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian unstable/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian unstable/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian unstable/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian unstable/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian unstable/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian unstable/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian unstable/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian unstable/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian unstable/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian unstable/main i386 libextutils-depends-perl all 0.8001-2 [17.1 kB] Get: 31 http://deb.debian.org/debian unstable/main i386 libb-hooks-op-annotation-perl i386 0.44-3+b4 [14.0 kB] Get: 32 http://deb.debian.org/debian unstable/main i386 libb-hooks-op-check-perl i386 0.22-3+b2 [10.7 kB] Get: 33 http://deb.debian.org/debian unstable/main i386 libclass-method-modifiers-perl all 2.15-1 [18.0 kB] Get: 34 http://deb.debian.org/debian unstable/main i386 libclass-xsaccessor-perl i386 1.19-4+b4 [37.5 kB] Get: 35 http://deb.debian.org/debian unstable/main i386 libdynaloader-functions-perl all 0.004-1 [12.1 kB] Get: 36 http://deb.debian.org/debian unstable/main i386 libdevel-callchecker-perl i386 0.009-1+b1 [16.2 kB] Get: 37 http://deb.debian.org/debian unstable/main i386 libdevel-stacktrace-perl all 2.0500-1 [26.4 kB] Get: 38 http://deb.debian.org/debian unstable/main i386 libfunction-parameters-perl i386 2.002004-1+b3 [60.2 kB] Get: 39 http://deb.debian.org/debian unstable/main i386 libparams-classify-perl i386 0.015-2+b4 [23.1 kB] Get: 40 http://deb.debian.org/debian unstable/main i386 libmodule-runtime-perl all 0.016-2 [19.6 kB] Get: 41 http://deb.debian.org/debian unstable/main i386 libimport-into-perl all 1.002005-2 [11.3 kB] Get: 42 http://deb.debian.org/debian unstable/main i386 librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 43 http://deb.debian.org/debian unstable/main i386 libsub-quote-perl all 2.006008-1 [21.8 kB] Get: 44 http://deb.debian.org/debian unstable/main i386 libmoo-perl all 2.005005-1 [58.0 kB] Get: 45 http://deb.debian.org/debian unstable/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Get: 46 http://deb.debian.org/debian unstable/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 21.7 MB in 0s (58.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19952 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libextutils-depends-perl. Preparing to unpack .../29-libextutils-depends-perl_0.8001-2_all.deb ... Unpacking libextutils-depends-perl (0.8001-2) ... Selecting previously unselected package libb-hooks-op-annotation-perl. Preparing to unpack .../30-libb-hooks-op-annotation-perl_0.44-3+b4_i386.deb ... Unpacking libb-hooks-op-annotation-perl (0.44-3+b4) ... Selecting previously unselected package libb-hooks-op-check-perl:i386. Preparing to unpack .../31-libb-hooks-op-check-perl_0.22-3+b2_i386.deb ... Unpacking libb-hooks-op-check-perl:i386 (0.22-3+b2) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../32-libclass-method-modifiers-perl_2.15-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.15-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../33-libclass-xsaccessor-perl_1.19-4+b4_i386.deb ... Unpacking libclass-xsaccessor-perl (1.19-4+b4) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../34-libdynaloader-functions-perl_0.004-1_all.deb ... Unpacking libdynaloader-functions-perl (0.004-1) ... Selecting previously unselected package libdevel-callchecker-perl:i386. Preparing to unpack .../35-libdevel-callchecker-perl_0.009-1+b1_i386.deb ... Unpacking libdevel-callchecker-perl:i386 (0.009-1+b1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../36-libdevel-stacktrace-perl_2.0500-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0500-1) ... Selecting previously unselected package libfunction-parameters-perl. Preparing to unpack .../37-libfunction-parameters-perl_2.002004-1+b3_i386.deb ... Unpacking libfunction-parameters-perl (2.002004-1+b3) ... Selecting previously unselected package libparams-classify-perl:i386. Preparing to unpack .../38-libparams-classify-perl_0.015-2+b4_i386.deb ... Unpacking libparams-classify-perl:i386 (0.015-2+b4) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../39-libmodule-runtime-perl_0.016-2_all.deb ... Unpacking libmodule-runtime-perl (0.016-2) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../40-libimport-into-perl_1.002005-2_all.deb ... Unpacking libimport-into-perl (1.002005-2) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../41-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../42-libsub-quote-perl_2.006008-1_all.deb ... Unpacking libsub-quote-perl (2.006008-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../43-libmoo-perl_2.005005-1_all.deb ... Unpacking libmoo-perl (2.005005-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../44-libperl-dev_5.40.0-7_i386.deb ... Unpacking libperl-dev:i386 (5.40.0-7) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../45-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libdynaloader-functions-perl (0.004-1) ... Setting up libclass-method-modifiers-perl (2.15-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:i386 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libextutils-depends-perl (0.8001-2) ... Setting up autotools-dev (20220109.1) ... Setting up libfunction-parameters-perl (2.002004-1+b3) ... Setting up autopoint (0.22.5-2) ... Setting up libb-hooks-op-check-perl:i386 (0.22-3+b2) ... Setting up libb-hooks-op-annotation-perl (0.44-3+b4) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-quote-perl (2.006008-1) ... Setting up libdevel-stacktrace-perl (2.0500-1) ... Setting up libclass-xsaccessor-perl (1.19-4+b4) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up libdevel-callchecker-perl:i386 (0.009-1+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl:i386 (0.015-2+b4) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libmodule-runtime-perl (0.016-2) ... Setting up libimport-into-perl (1.002005-2) ... Setting up libmoo-perl (2.005005-1) ... Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/7668/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for unstable I: user script /srv/workspace/pbuilder/7668/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libtrue-perl-1.0.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtrue-perl_1.0.2-2_source.changes dpkg-buildpackage: info: source package libtrue-perl dpkg-buildpackage: info: source version 1.0.2-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Debian Janitor dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for true Writing MYMETA.yml and MYMETA.json dh_auto_build make -j10 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' Running Mkbootstrap for true () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' true.xs > true.xsc chmod 644 "true.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 cp lib/true.pm blib/lib/true.pm cp lib/true/VERSION.pm blib/lib/true/VERSION.pm mv true.xsc true.c i686-linux-gnu-gcc -c -I/usr/lib/i386-linux-gnu/perl5/5.40/B/Hooks/OP/Annotation/Install -I/usr/lib/i386-linux-gnu/perl5/5.40/B/Hooks/OP/Check/Install -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"v1.0.2\" -DXS_VERSION=\"v1.0.2\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" true.c rm -f blib/arch/auto/true/true.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libtrue-perl-1.0.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong true.o -o blib/arch/auto/true/true.so \ \ chmod 755 blib/arch/auto/true/true.so Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_auto_test make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_compile.t ........ 1..1 ok 1 - use true; ok t/eval.t .............. 1..4 ok 1 - direct: true doesn't affect non-require evals ok 2 - direct: no eval error ok 3 - indirect: true doesn't affect non-require evals ok 4 - indirect: no eval error ok t/exception.t ......... 1..4 # Subtest: Good ok 1 - use: Good using true ok 2 - use: Good loaded OK 1..2 ok 1 - Good # Subtest: DirectCompileTimeException ok 1 - direct: module throws a compile-time exception # TODO don't clean after itself yet not ok 2 - direct: true cleans up correctly # TODO don't clean after itself yet # Failed (TODO) test 'direct: true cleans up correctly' # at t/exception.t line 24. # Structures begin differing at: # $got->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = '1' # $expected->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = Does not exist 1..2 ok 2 - DirectCompileTimeException # Subtest: IndirectCompileTimeException ok 1 - indirect: module throws a compile-time exception # TODO don't clean after itself yet not ok 2 - direct: true cleans up correctly # TODO don't clean after itself yet # Failed (TODO) test 'direct: true cleans up correctly' # at t/exception.t line 32. # Structures begin differing at: # $got->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = '1' # $expected->{/build/reproducible-path/libtrue-perl-1.0.2/t/lib/DirectCompileTimeException.pm} = Does not exist 1..2 ok 3 - IndirectCompileTimeException # Subtest: Ugly ok 1 - use: Ugly using true ok 2 - use: Ugly loaded OK 1..2 ok 4 - Ugly ok t/leak.t .............. 1..6 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - leak (direct): true doesn't leak into a module that doesn't use it ok 4 - leak (indirect): true doesn't leak into a module that doesn't use it ok 5 - use: Ugly using true ok 6 - use: Ugly loaded OK ok t/require.t ........... 1..6 ok 1 - require: module using true ok 2 - require: module loaded OK ok 3 - require: module not using true ok 4 - require: script using true ok 5 - require: script loaded OK ok 6 - require: script not using true ok t/require_subclass.t .. 1..14 ok 1 - require: module using true ok 2 - require: module loaded OK ok 3 - require: module using true ok 4 - require: module loaded OK ok 5 - require: module using true ok 6 - require: module loaded OK ok 7 - require: module using true ok 8 - require: module loaded OK ok 9 - require: module not using true ok 10 - require: script using true ok 11 - require: script loaded OK ok 12 - require: script using true ok 13 - require: script loaded OK ok 14 - require: script not using true ok t/rt-124745.t ......... 1..2 ok 1 - Moo(se)::with: module using Moo::Role and Function::Parameters ok 2 - require: module loaded OK ok t/unimport.t .......... 1..8 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - use: direct top-level unimport works ok 4 - use: direct nested unimport works ok 5 - use: indirect top-level unimport works ok 6 - use: indirect nested unimport works ok 7 - use: Ugly using true ok 8 - use: Ugly loaded OK ok t/use.t ............... 1..5 ok 1 - use: Good using true ok 2 - use: Good loaded OK ok 3 - use: module not using true ok 4 - use: Ugly using true ok 5 - use: Ugly loaded OK ok t/use_subclass.t ...... 1..9 ok 1 - use: GoodWithSubclass using true ok 2 - use: GoodWithSubclass loaded OK ok 3 - use: GoodWithSubSubclass using true ok 4 - use: GoodWithSubSubclass loaded OK ok 5 - use: module not using true ok 6 - use: UglyWithSubclass using true ok 7 - use: UglWithSubclass loaded OK ok 8 - use: UglyWithSubSubclass using true ok 9 - use: UglyWithSubSubclass loaded OK ok t/version.t ........... 1..3 ok 1 - require true::VERSION; ok 2 - true::VERSION exists ok 3 - same $VERSION as true ok All tests successful. Files=11, Tests=62, 2 wallclock secs ( 0.06 usr 0.02 sys + 1.34 cusr 0.16 csys = 1.58 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtrue-perl/ make -j10 install DESTDIR=/build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/true/true.so Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true/VERSION.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true.3pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true::VERSION.3pm make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtrue-perl' in '../libtrue-perl_1.0.2-2_i386.deb'. dpkg-deb: building package 'libtrue-perl-dbgsym' in '../libtrue-perl-dbgsym_1.0.2-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libtrue-perl_1.0.2-2_i386.buildinfo dpkg-genchanges --build=binary -O../libtrue-perl_1.0.2-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/7668/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/7668/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/7668 and its subdirectories I: Current time: Fri Nov 22 02:37:56 +14 2024 I: pbuilder-time-stamp: 1732192676 + false + set +x Thu Nov 21 12:37:56 UTC 2024 I: Signing ./b2/libtrue-perl_1.0.2-2_i386.buildinfo as libtrue-perl_1.0.2-2_i386.buildinfo.asc Thu Nov 21 12:37:56 UTC 2024 I: Signed ./b2/libtrue-perl_1.0.2-2_i386.buildinfo as ./b2/libtrue-perl_1.0.2-2_i386.buildinfo.asc Thu Nov 21 12:37:56 UTC 2024 - build #2 for libtrue-perl/unstable/i386 on ionos2-i386 done. Starting cleanup. All cleanup done. Thu Nov 21 12:37:56 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-nta81qVm, removing. /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH: total 48 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 12:37 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 21 12:37 b2 -rw-r--r-- 1 jenkins jenkins 2271 May 28 2022 libtrue-perl_1.0.2-2.dsc -rw------- 1 jenkins jenkins 36409 Nov 21 12:37 rbuildlog.Mvu454A /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1: total 116 -rw-r--r-- 1 jenkins jenkins 32721 Nov 21 12:37 build.log -rw-r--r-- 1 jenkins jenkins 31768 Nov 21 12:37 libtrue-perl-dbgsym_1.0.2-2_i386.deb -rw-r--r-- 1 jenkins jenkins 5908 Nov 21 12:37 libtrue-perl_1.0.2-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2271 Nov 21 12:37 libtrue-perl_1.0.2-2.dsc -rw-r--r-- 1 jenkins jenkins 5585 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 6467 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1457 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.changes -rw-r--r-- 1 jenkins jenkins 15964 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1303 Nov 21 12:37 libtrue-perl_1.0.2-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2: total 120 -rw-r--r-- 1 jenkins jenkins 34616 Nov 21 12:37 build.log -rw-r--r-- 1 jenkins jenkins 31768 Nov 21 12:37 libtrue-perl-dbgsym_1.0.2-2_i386.deb -rw-r--r-- 1 jenkins jenkins 5908 Nov 21 12:37 libtrue-perl_1.0.2-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2271 Nov 21 12:37 libtrue-perl_1.0.2-2.dsc -rw-r--r-- 1 jenkins jenkins 5585 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 6467 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1457 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.changes -rw-r--r-- 1 jenkins jenkins 15964 Nov 21 12:37 libtrue-perl_1.0.2-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1303 Nov 21 12:37 libtrue-perl_1.0.2-2_source.changes Thu Nov 21 12:37:56 UTC 2024 I: Deleting $TMPDIR on ionos2-i386.debian.net. Thu Nov 21 12:37:57 UTC 2024 I: libtrue-perl_1.0.2-2_i386.changes: Format: 1.8 Date: Sat, 28 May 2022 11:42:41 +0100 Source: libtrue-perl Binary: libtrue-perl libtrue-perl-dbgsym Architecture: i386 Version: 1.0.2-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Debian Janitor Description: libtrue-perl - automatically return a true value when a file is required Changes: libtrue-perl (1.0.2-2) unstable; urgency=medium . * Remove constraints unnecessary since stretch: + Build-Depends: Drop versioned constraint on libextutils-depends-perl. Checksums-Sha1: 58c8b4c69f6704a3a1c9011ca83fa47faa995532 31768 libtrue-perl-dbgsym_1.0.2-2_i386.deb ebe7811cd02a517991db2d892230e5bab80b8a25 5585 libtrue-perl_1.0.2-2_i386.buildinfo 118c81c4c83d5b9cf4f69178df5d55de3a64ff76 15964 libtrue-perl_1.0.2-2_i386.deb Checksums-Sha256: 0fc9c3edc8d5792153b513be806e51f4315f161649dde09054f60b3c5e486287 31768 libtrue-perl-dbgsym_1.0.2-2_i386.deb d9a59ddfc74dcd780d01de522a58122e41a9b45d99be9621c988cfebc4fd44eb 5585 libtrue-perl_1.0.2-2_i386.buildinfo 370474e4adea3a457260b60e58f47a81c7c1699b8d726c6e92d8c2725503ed1e 15964 libtrue-perl_1.0.2-2_i386.deb Files: a73a19ff9e48e353ee71f48561bc3304 31768 debug optional libtrue-perl-dbgsym_1.0.2-2_i386.deb ac70490cc4fdac1710dcf3a1435037f4 5585 perl optional libtrue-perl_1.0.2-2_i386.buildinfo f69f53ed0f25715fe422ed2149455207 15964 perl optional libtrue-perl_1.0.2-2_i386.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libtrue-perl_1.0.2-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libtrue-perl_1.0.2-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/libtrue-perl_1.0.2-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/libtrue-perl_1.0.2-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/i386/libtrue-perl_1.0.2-2_i386.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libtrue-perl_1.0.2-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-21 12:37:13.151659563 +0000 +++ b2/build.log 2024-11-21 12:37:56.945686995 +0000 @@ -1,7 +1,6 @@ -W: cgroups are not available on the host, not using them. I: pbuilder: network access will be disabled during build -I: Current time: Wed Dec 24 06:59:52 -12 2025 -I: pbuilder-time-stamp: 1766602792 +I: Current time: Fri Nov 22 02:37:15 +14 2024 +I: pbuilder-time-stamp: 1732192635 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration @@ -27,53 +26,86 @@ dpkg-source: info: unpacking libtrue-perl_1.0.2-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/14853/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D01_modify_environment starting +debug: Running on ionos2-i386. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 21 12:37 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='i386' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' - DISTRIBUTION='unstable' - HOME='/root' - HOST_ARCH='i386' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=i386 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' + DIRSTACK=() + DISTRIBUTION=unstable + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=i686 + HOST_ARCH=i386 IFS=' ' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - LD_LIBRARY_PATH='/usr/lib/libeatmydata' - LD_PRELOAD='libeatmydata.so' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='14853' - PS1='# ' - PS2='> ' + INVOCATION_ID=eda3b62d5dfe4e0ab943779723a5372b + LANG=C + LANGUAGE=de_CH:de + LC_ALL=C + LD_LIBRARY_PATH=/usr/lib/libeatmydata + LD_PRELOAD=libeatmydata.so + MACHTYPE=i686-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=7668 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_lCRc --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1 --logfile b1/build.log libtrue-perl_1.0.2-2.dsc' - SUDO_GID='112' - SUDO_UID='107' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/sbin/chroot' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/pbuilderrc_5AcK --distribution unstable --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2 --logfile b2/build.log libtrue-perl_1.0.2-2.dsc' + SUDO_GID=112 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos6-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/14853/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -172,7 +204,7 @@ Get: 44 http://deb.debian.org/debian unstable/main i386 libmoo-perl all 2.005005-1 [58.0 kB] Get: 45 http://deb.debian.org/debian unstable/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Get: 46 http://deb.debian.org/debian unstable/main i386 libtest-pod-perl all 1.52-3 [12.6 kB] -Fetched 21.7 MB in 0s (90.8 MB/s) +Fetched 21.7 MB in 0s (58.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19952 files and directories currently installed.) @@ -371,7 +403,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libtrue-perl-1.0.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libtrue-perl_1.0.2-2_source.changes +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for unstable +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libtrue-perl-1.0.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtrue-perl_1.0.2-2_source.changes dpkg-buildpackage: info: source package libtrue-perl dpkg-buildpackage: info: source version 1.0.2-2 dpkg-buildpackage: info: source distribution unstable @@ -393,7 +429,7 @@ Writing Makefile for true Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j22 + make -j10 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' Running Mkbootstrap for true () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' true.xs > true.xsc @@ -411,7 +447,7 @@ Manifying 2 pod documents make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_auto_test - make -j22 test TEST_VERBOSE=1 + make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t @@ -537,13 +573,13 @@ ok 3 - same $VERSION as true ok All tests successful. -Files=11, Tests=62, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.80 cusr 0.08 csys = 0.94 CPU) +Files=11, Tests=62, 2 wallclock secs ( 0.06 usr 0.02 sys + 1.34 cusr 0.16 csys = 1.58 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtrue-perl/ - make -j22 install DESTDIR=/build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j10 install DESTDIR=/build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtrue-perl-1.0.2' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- true.bs blib/arch/auto/true/true.bs 644 Manifying 2 pod documents @@ -551,8 +587,8 @@ Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/true/true.so Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true.pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/lib/i386-linux-gnu/perl5/5.40/true/VERSION.pm -Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true::VERSION.3pm Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true.3pm +Installing /build/reproducible-path/libtrue-perl-1.0.2/debian/libtrue-perl/usr/share/man/man3/true::VERSION.3pm make[1]: Leaving directory '/build/reproducible-path/libtrue-perl-1.0.2' dh_installdocs dh_installchangelogs @@ -580,12 +616,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/7668/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/14853 and its subdirectories -I: Current time: Wed Dec 24 07:00:12 -12 2025 -I: pbuilder-time-stamp: 1766602812 +I: removing directory /srv/workspace/pbuilder/7668 and its subdirectories +I: Current time: Fri Nov 22 02:37:56 +14 2024 +I: pbuilder-time-stamp: 1732192676 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libtrue-perl_1.0.2-2.diff: 68.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libtrue-perl_1.0.2-2.diff.gz b2/build.log: 76.4% -- replaced with stdout Compressing the 1st log... b1/build.log: 77.1% -- replaced with stdout Thu Nov 21 12:37:58 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libtrue-perl_unstable_i386_1732192678 + touch /var/log/reproducible-builds/diffoscope_stamp_libtrue-perl_unstable_i386_1732192678 + RESULT=0 + systemd-run '--description=diffoscope on libtrue-perl/1.0.2-2 in unstable/i386' --slice=rb-build-diffoscope.slice -u rb-diffoscope-i386_11-33717 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH --run-session -c jenkins-reproducible-unstable-diffoscope-059e93a2-fe25-49fd-b37c-9e8010b78ecc -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/dbd-tmp-buN1SjQ ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/libtrue-perl_1.0.2-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/libtrue-perl_1.0.2-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/libtrue-perl_1.0.2-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1/libtrue-perl_1.0.2-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2/libtrue-perl_1.0.2-2_i386.changes' + false + set +x Running as unit: rb-diffoscope-i386_11-33717.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/libtrue-perl_1.0.2-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/libtrue-perl_1.0.2-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/libtrue-perl_1.0.2-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b1/libtrue-perl_1.0.2-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.u3035PTH/b2/libtrue-perl_1.0.2-2_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.339s) 0.339s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 678ms CPU time consumed: 649ms _ _ _ _ _ | (_) |__ | |_ _ __ _ _ ___ _ __ ___ _ __| | | | | '_ \| __| '__| | | |/ _ \_____| '_ \ / _ \ '__| | | | | |_) | |_| | | |_| | __/_____| |_) | __/ | | | |_|_|_.__/ \__|_| \__,_|\___| | .__/ \___|_| |_| |_| Thu Nov 21 12:37:59 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Thu Nov 21 12:37:59 UTC 2024 I: libtrue-perl from unstable built successfully and reproducibly on i386. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-21 12:38:00] INFO: Starting at 2024-11-21 12:38:00.162002 [2024-11-21 12:38:00] INFO: Generating the pages of 1 package(s) [2024-11-21 12:38:00] CRITICAL: https://tests.reproducible-builds.org/debian/unstable/i386/libtrue-perl didn't produce a buildlog, even though it has been built. [2024-11-21 12:38:00] INFO: Finished at 2024-11-21 12:38:00.685929, took: 0:00:00.523937 Thu Nov 21 12:38:00 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/i386/libtrue-perl.html Thu Nov 21 12:38:00 UTC 2024 I: Submitting .buildinfo files to external archives: Thu Nov 21 12:38:00 UTC 2024 I: Submitting 8.0K b1/libtrue-perl_1.0.2-2_i386.buildinfo.asc https://buildinfo.debian.net/ebe7811cd02a517991db2d892230e5bab80b8a25/libtrue-perl_1.0.2-2_i386 Thu Nov 21 12:38:01 UTC 2024 I: Submitting 8.0K b2/libtrue-perl_1.0.2-2_i386.buildinfo.asc https://buildinfo.debian.net/f3a786782ca9c9c08d98e567459691f41fb90e5a/libtrue-perl_1.0.2-2_i386 Thu Nov 21 12:38:02 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Nov 21 12:38:02 UTC 2024 I: Done submitting .buildinfo files. Thu Nov 21 12:38:02 UTC 2024 I: Removing signed libtrue-perl_1.0.2-2_i386.buildinfo.asc files: removed './b1/libtrue-perl_1.0.2-2_i386.buildinfo.asc' removed './b2/libtrue-perl_1.0.2-2_i386.buildinfo.asc' 1732192682 i386 unstable libtrue-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libtrue-perl_1.0.2-2.rbuild.log: 74.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libtrue-perl_1.0.2-2.rbuild.log.gz [2024-11-21 12:38:02] INFO: Starting at 2024-11-21 12:38:02.755840 [2024-11-21 12:38:02] INFO: Generating the pages of 1 package(s) [2024-11-21 12:38:03] INFO: Finished at 2024-11-21 12:38:03.317779, took: 0:00:00.561948 All cleanup done. Thu Nov 21 12:38:03 UTC 2024 - total duration: 0h 1m 30s. Thu Nov 21 12:38:03 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-9QuUXRB1, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 33.697s CPU time consumed: 7.537s