Running as unit: rb-build-i386_12-27853.service ==================================================================================== Tue Nov 12 10:42:53 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_12) on jenkins, called using "ionos12-i386 ionos16-i386" as arguments. Tue Nov 12 10:42:53 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-f3UzRM1K" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Nov 12 10:42:53 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos12-i386.debian.net is marked as down. Tue Nov 12 10:42:53 UTC 2024 - checking via ssh if ionos12-i386.debian.net is up. removed '/tmp/read-only-fs-test-vjh3xV' Tue Nov 12 10:42:54 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Tue Nov 12 10:42:54 UTC 2024 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-vUN9Zn' ok, let's check if libconvert-scalar-perl is building anywhere yet… ok, libconvert-scalar-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libconvert-scalar-perl in trixie on i386 on jenkins now. 1st build will be done on ionos12-i386.debian.net. 2nd build will be done on ionos16-i386.debian.net. ============================================================================= Tue Nov 12 10:43:13 UTC 2024 I: starting to build libconvert-scalar-perl/trixie/i386 on jenkins on '2024-11-12 10:42' Tue Nov 12 10:43:13 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_12/27853/console.log 1731408193 i386 trixie libconvert-scalar-perl Tue Nov 12 10:43:13 UTC 2024 I: Downloading source for trixie/libconvert-scalar-perl=1.12-2 --2024-11-12 10:43:13-- http://deb.debian.org/debian/pool/main/libc/libconvert-scalar-perl/libconvert-scalar-perl_1.12-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2433 (2.4K) [text/prs.lines.tag] Saving to: ‘libconvert-scalar-perl_1.12-2.dsc’ 0K .. 100% 306M=0s 2024-11-12 10:43:13 (306 MB/s) - ‘libconvert-scalar-perl_1.12-2.dsc’ saved [2433/2433] --2024-11-12 10:43:13-- http://deb.debian.org/debian/pool/main/libc/libconvert-scalar-perl/libconvert-scalar-perl_1.12-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2433 (2.4K) [text/prs.lines.tag] Saving to: ‘libconvert-scalar-perl_1.12-2.dsc’ 0K .. 100% 306M=0s 2024-11-12 10:43:13 (306 MB/s) - ‘libconvert-scalar-perl_1.12-2.dsc’ saved [2433/2433] Tue Nov 12 10:43:13 UTC 2024 I: libconvert-scalar-perl_1.12-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libconvert-scalar-perl Binary: libconvert-scalar-perl Architecture: any Version: 1.12-2 Maintainer: Debian Perl Group Uploaders: Lucas Kanashiro Homepage: https://metacpan.org/release/Convert-Scalar Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native Package-List: libconvert-scalar-perl deb perl optional arch=any Checksums-Sha1: 93e99226fa610ea087c528836b50f7440a7f186a 8502 libconvert-scalar-perl_1.12.orig.tar.gz e6839bfd72b78328de16ab71794790ba99c780bf 2460 libconvert-scalar-perl_1.12-2.debian.tar.xz Checksums-Sha256: 1fcee7019b7ffd5081d685d2ac8407adfc5be011902826668903dc8abcb3c890 8502 libconvert-scalar-perl_1.12.orig.tar.gz d26e15a90aaacfd664dc56171d77931f8838d0b8a2803eb7d929d0ccd6a8e35b 2460 libconvert-scalar-perl_1.12-2.debian.tar.xz Files: 968eec30b08c353ad54bf0075f5beef9 8502 libconvert-scalar-perl_1.12.orig.tar.gz 4548c3a66c7928882c61709f19d49893 2460 libconvert-scalar-perl_1.12-2.debian.tar.xz Dgit: f3888a03d52a1e61315c9c6c64c6a9dd3d805f96 debian archive/debian/1.12-2 https://git.dgit.debian.org/libconvert-scalar-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmLlT0dfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qga8pg//bXC9wyx0/4Yl9crsqm6fdOieXcbz7I73dC4pemA1lVaQOpbUs6irRuwV HLUc3ylW8H7e3zTdnCovmzZSD98u3+i2mUpxTiQvLhQxzKevuye53NV7OaTNb7Ro c1892sv4velqfXJjatYtLWmAGU0nH1e3Sk9FEaEmUdvfIuKDnQOOYcxMDhtSXqkq gaPHRmFYI5eGgn3f4cakdlXyloyveFrST81SqpV8Glvm4ECgR0FefmrlvB0nTvnv OzY6UvndKQ0+Ch8EiIWtsZ6+X+eheXJN3wLVrk9fjL0JrIaYm1Uuj399fp+r9Vor fZGeoSKXDMLZh/yzErNcK+D9Nc2coGILxZ7qJtwnu8otbiErt4zOvUQucMOXvEdg apKQvNO2I+ji8pYJsEOTvLI9QzJ7LI24JXeyBAFHTb82Lg8vOpI5eb0JEIeFI+9j HJ/ZxxyR0Trf8sOA3Qc3EBqIZeRPTv+OPdecawTpzovbC7qTXzxDJHAQkIL8J5iI 0MqDvWaTR+RPZMuHoweEjY6EKP/vnNJ6N9FxfnlaesZrGC154ujrJCsmB5QwzXzW cqekPjgUAmSfsFMcbW25c85jI9j0dkkHmDhgag/sxUOD39MyIcP7fwXbCI/cWnt8 AKoIPJJki8Th1cIDNeQfimkvw047KMqvadCcm7rpSigbDCoyDUo= =7KII -----END PGP SIGNATURE----- Tue Nov 12 10:43:13 UTC 2024 I: Checking whether the package is not for us Tue Nov 12 10:43:13 UTC 2024 I: Starting 1st build on remote node ionos12-i386.debian.net. Tue Nov 12 10:43:14 UTC 2024 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Tue Nov 12 10:43:14 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos12-i386.debian.net is marked as down. Tue Nov 12 10:43:14 UTC 2024 - checking via ssh if ionos12-i386.debian.net is up. removed '/tmp/read-only-fs-test-toGImR' ==================================================================================== Tue Nov 12 10:43:15 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos12-i386, called using "1 libconvert-scalar-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB 1.12-2" as arguments. Tue Nov 12 10:43:15 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-0r5SV8wC" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Tue Nov 12 10:43:15 UTC 2024 I: Downloading source for trixie/libconvert-scalar-perl=1.12-2 Reading package lists... NOTICE: 'libconvert-scalar-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 13.4 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (dsc) [2433 B] Get:2 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (tar) [8502 B] Get:3 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (diff) [2460 B] Fetched 13.4 kB in 0s (505 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libconvert-scalar-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 13.4 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (dsc) [2433 B] Get:2 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (tar) [8502 B] Get:3 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (diff) [2460 B] Fetched 13.4 kB in 0s (505 kB/s) Download complete and in download only mode ============================================================================= Building libconvert-scalar-perl in trixie on i386 on ionos12-i386 now. Date: Tue Nov 12 11:43:15 CET 2024 Date UTC: Tue Nov 12 10:43:15 UTC 2024 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Mon Nov 11 22:43:15 -12 2024 I: pbuilder-time-stamp: 1731408195 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libconvert-scalar-perl_1.12-2.dsc] I: copying [./libconvert-scalar-perl_1.12.orig.tar.gz] I: copying [./libconvert-scalar-perl_1.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jul 30 15:33:27 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libconvert-scalar-perl_1.12-2.dsc: no acceptable signature found dpkg-source: info: extracting libconvert-scalar-perl in libconvert-scalar-perl-1.12 dpkg-source: info: unpacking libconvert-scalar-perl_1.12.orig.tar.gz dpkg-source: info: unpacking libconvert-scalar-perl_1.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-spelling-errors.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/37523/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='02de3122707c49c38b85b9607c1b715b' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='37523' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_7z2K --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1 --logfile b1/build.log libconvert-scalar-perl_1.12-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos12-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/37523/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 21.3 MB of archives. After unpacking 80.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-9 [102 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.1 [733 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libcanary-stability-perl all 2013-1 [7884 B] Get: 31 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Fetched 21.3 MB in 0s (57.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-9_i386.deb ... Unpacking bsdextrautils (2.40.2-9) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../29-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../30-libperl-dev_5.40.0-7_i386.deb ... Unpacking libperl-dev:i386 (5.40.0-7) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-9) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:i386 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libconvert-scalar-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconvert-scalar-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libconvert-scalar-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040000, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Convert::Scalar. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Convert::Scalar, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Convert::Scalar with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Convert::Scalar Writing MYMETA.yml and MYMETA.json dh_auto_build make -j11 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' Running Mkbootstrap for Scalar () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Scalar.xs > Scalar.xsc chmod 644 "Scalar.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 cp Scalar.pm blib/lib/Convert/Scalar.pm mv Scalar.xsc Scalar.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" Scalar.c rm -f blib/arch/auto/Convert/Scalar/Scalar.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Scalar.o -o blib/arch/auto/Convert/Scalar/Scalar.so \ \ chmod 755 blib/arch/auto/Convert/Scalar/Scalar.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_auto_test make -j11 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t .... 1..1 ok 1 ok t/01_utf8.t .... 1..21 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok t/02_call.t .... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/03_refcnt.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok All tests successful. Files=4, Tests=30, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.10 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libconvert-scalar-perl/ make -j11 install DESTDIR=/build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Convert/Scalar/Scalar.so Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/lib/i386-linux-gnu/perl5/5.40/Convert/Scalar.pm Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/share/man/man3/Convert::Scalar.3pm make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconvert-scalar-perl' in '../libconvert-scalar-perl_1.12-2_i386.deb'. dpkg-deb: building package 'libconvert-scalar-perl-dbgsym' in '../libconvert-scalar-perl-dbgsym_1.12-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libconvert-scalar-perl_1.12-2_i386.buildinfo dpkg-genchanges --build=binary -O../libconvert-scalar-perl_1.12-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/37523 and its subdirectories I: Current time: Mon Nov 11 22:43:48 -12 2024 I: pbuilder-time-stamp: 1731408228 Tue Nov 12 10:43:48 UTC 2024 I: Signing ./b1/libconvert-scalar-perl_1.12-2_i386.buildinfo as libconvert-scalar-perl_1.12-2_i386.buildinfo.asc Tue Nov 12 10:43:49 UTC 2024 I: Signed ./b1/libconvert-scalar-perl_1.12-2_i386.buildinfo as ./b1/libconvert-scalar-perl_1.12-2_i386.buildinfo.asc Tue Nov 12 10:43:49 UTC 2024 - build #1 for libconvert-scalar-perl/trixie/i386 on ionos12-i386 done. Starting cleanup. All cleanup done. Tue Nov 12 10:43:49 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-0r5SV8wC, removing. /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 12 10:43 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 12 10:43 b2 -rw-r--r-- 1 jenkins jenkins 2433 Jul 30 2022 libconvert-scalar-perl_1.12-2.dsc -rw------- 1 jenkins jenkins 3630 Nov 12 10:43 rbuildlog.1dHb3pQ /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1: total 128 -rw-r--r-- 1 jenkins jenkins 25559 Nov 12 10:43 build.log -rw-r--r-- 1 jenkins jenkins 46000 Nov 12 10:43 libconvert-scalar-perl-dbgsym_1.12-2_i386.deb -rw-r--r-- 1 jenkins jenkins 2460 Nov 12 10:43 libconvert-scalar-perl_1.12-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2433 Nov 12 10:43 libconvert-scalar-perl_1.12-2.dsc -rw-r--r-- 1 jenkins jenkins 5068 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5950 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2117 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.changes -rw-r--r-- 1 jenkins jenkins 18932 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1925 Nov 12 10:43 libconvert-scalar-perl_1.12-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2: total 0 Tue Nov 12 10:43:49 UTC 2024 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Nov 11 22:43:15 -12 2024 I: pbuilder-time-stamp: 1731408195 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libconvert-scalar-perl_1.12-2.dsc] I: copying [./libconvert-scalar-perl_1.12.orig.tar.gz] I: copying [./libconvert-scalar-perl_1.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jul 30 15:33:27 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libconvert-scalar-perl_1.12-2.dsc: no acceptable signature found dpkg-source: info: extracting libconvert-scalar-perl in libconvert-scalar-perl-1.12 dpkg-source: info: unpacking libconvert-scalar-perl_1.12.orig.tar.gz dpkg-source: info: unpacking libconvert-scalar-perl_1.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-spelling-errors.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/37523/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='02de3122707c49c38b85b9607c1b715b' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='37523' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_7z2K --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1 --logfile b1/build.log libconvert-scalar-perl_1.12-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos12-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/37523/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 21.3 MB of archives. After unpacking 80.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-9 [102 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.1 [733 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libcanary-stability-perl all 2013-1 [7884 B] Get: 31 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Fetched 21.3 MB in 0s (57.3 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-9_i386.deb ... Unpacking bsdextrautils (2.40.2-9) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../29-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../30-libperl-dev_5.40.0-7_i386.deb ... Unpacking libperl-dev:i386 (5.40.0-7) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-9) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:i386 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libconvert-scalar-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconvert-scalar-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libconvert-scalar-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040000, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Convert::Scalar. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Convert::Scalar, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Convert::Scalar with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Convert::Scalar Writing MYMETA.yml and MYMETA.json dh_auto_build make -j11 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' Running Mkbootstrap for Scalar () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Scalar.xs > Scalar.xsc chmod 644 "Scalar.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 cp Scalar.pm blib/lib/Convert/Scalar.pm mv Scalar.xsc Scalar.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" Scalar.c rm -f blib/arch/auto/Convert/Scalar/Scalar.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Scalar.o -o blib/arch/auto/Convert/Scalar/Scalar.so \ \ chmod 755 blib/arch/auto/Convert/Scalar/Scalar.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_auto_test make -j11 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t .... 1..1 ok 1 ok t/01_utf8.t .... 1..21 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok t/02_call.t .... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/03_refcnt.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok All tests successful. Files=4, Tests=30, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.10 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libconvert-scalar-perl/ make -j11 install DESTDIR=/build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Convert/Scalar/Scalar.so Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/lib/i386-linux-gnu/perl5/5.40/Convert/Scalar.pm Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/share/man/man3/Convert::Scalar.3pm make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconvert-scalar-perl' in '../libconvert-scalar-perl_1.12-2_i386.deb'. dpkg-deb: building package 'libconvert-scalar-perl-dbgsym' in '../libconvert-scalar-perl-dbgsym_1.12-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libconvert-scalar-perl_1.12-2_i386.buildinfo dpkg-genchanges --build=binary -O../libconvert-scalar-perl_1.12-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/37523 and its subdirectories I: Current time: Mon Nov 11 22:43:48 -12 2024 I: pbuilder-time-stamp: 1731408228 Tue Nov 12 10:43:50 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos16-i386.debian.net. Tue Nov 12 10:43:50 UTC 2024 I: Preparing to do remote build '2' on ionos16-i386.debian.net. Tue Nov 12 10:43:50 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Tue Nov 12 10:43:50 UTC 2024 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-fGzFrV' ==================================================================================== Mon Dec 15 17:06:51 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos16-i386, called using "2 libconvert-scalar-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB 1.12-2" as arguments. Mon Dec 15 17:06:51 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-8Q3mVzJD" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Mon Dec 15 17:06:51 UTC 2025 I: Downloading source for trixie/libconvert-scalar-perl=1.12-2 Reading package lists... NOTICE: 'libconvert-scalar-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 13.4 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (dsc) [2433 B] Get:2 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (tar) [8502 B] Get:3 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (diff) [2460 B] Fetched 13.4 kB in 0s (687 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libconvert-scalar-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libconvert-scalar-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 13.4 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (dsc) [2433 B] Get:2 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (tar) [8502 B] Get:3 http://deb.debian.org/debian trixie/main libconvert-scalar-perl 1.12-2 (diff) [2460 B] Fetched 13.4 kB in 0s (687 kB/s) Download complete and in download only mode ============================================================================= Re-Building libconvert-scalar-perl in trixie on i386 on ionos16-i386 now. Date: Mon Dec 15 18:06:51 CET 2025 Date UTC: Mon Dec 15 17:06:51 UTC 2025 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_s9p1 + case ${ARCH} in + let NUM_CPU-=3 + case $ARCH in + locale=de_CH + language=de + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libconvert-scalar-perl = debian-installer -o libconvert-scalar-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libconvert-scalar-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_s9p1 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2 --logfile b2/build.log libconvert-scalar-perl_1.12-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Tue Dec 16 07:06:51 +14 2025 I: pbuilder-time-stamp: 1765818411 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libconvert-scalar-perl_1.12-2.dsc] I: copying [./libconvert-scalar-perl_1.12.orig.tar.gz] I: copying [./libconvert-scalar-perl_1.12-2.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Jul 30 15:33:27 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libconvert-scalar-perl_1.12-2.dsc: no acceptable signature found dpkg-source: info: extracting libconvert-scalar-perl in libconvert-scalar-perl-1.12 dpkg-source: info: unpacking libconvert-scalar-perl_1.12.orig.tar.gz dpkg-source: info: unpacking libconvert-scalar-perl_1.12-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-spelling-errors.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D01_modify_environment starting debug: Running on ionos16-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Dec 15 17:07 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=21 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=78a240f159d242a5a5305fd3c7344ff0 LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=48522 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_s9p1 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2 --logfile b2/build.log libconvert-scalar-perl_1.12-2.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://213.165.73.152:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcanary-stability-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 21.3 MB of archives. After unpacking 80.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-9 [102 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.1 [733 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libcanary-stability-perl all 2013-1 [7884 B] Get: 31 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.0-7 [1223 kB] Fetched 21.3 MB in 0s (92.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-9_i386.deb ... Unpacking bsdextrautils (2.40.2-9) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../29-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../30-libperl-dev_5.40.0-7_i386.deb ... Unpacking libperl-dev:i386 (5.40.0-7) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-9) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:i386 (5.40.0-7) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/48522/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/48522/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libconvert-scalar-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libconvert-scalar-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libconvert-scalar-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040000, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Convert::Scalar. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Convert::Scalar, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Convert::Scalar with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Convert::Scalar Writing MYMETA.yml and MYMETA.json dh_auto_build make -j21 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Scalar.xs > Scalar.xsc Running Mkbootstrap for Scalar () chmod 644 "Scalar.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 cp Scalar.pm blib/lib/Convert/Scalar.pm mv Scalar.xsc Scalar.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" Scalar.c rm -f blib/arch/auto/Convert/Scalar/Scalar.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libconvert-scalar-perl-1.12=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Scalar.o -o blib/arch/auto/Convert/Scalar/Scalar.so \ \ chmod 755 blib/arch/auto/Convert/Scalar/Scalar.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_auto_test make -j21 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t .... 1..1 ok 1 ok t/01_utf8.t .... 1..21 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok t/02_call.t .... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/03_refcnt.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok All tests successful. Files=4, Tests=30, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.04 cusr 0.00 csys = 0.06 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libconvert-scalar-perl/ make -j21 install DESTDIR=/build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Convert/Scalar/Scalar.so Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/lib/i386-linux-gnu/perl5/5.40/Convert/Scalar.pm Installing /build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl/usr/share/man/man3/Convert::Scalar.3pm make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconvert-scalar-perl' in '../libconvert-scalar-perl_1.12-2_i386.deb'. dpkg-deb: building package 'libconvert-scalar-perl-dbgsym' in '../libconvert-scalar-perl-dbgsym_1.12-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libconvert-scalar-perl_1.12-2_i386.buildinfo dpkg-genchanges --build=binary -O../libconvert-scalar-perl_1.12-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/48522/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/48522/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/48522 and its subdirectories I: Current time: Tue Dec 16 07:07:13 +14 2025 I: pbuilder-time-stamp: 1765818433 + false + set +x Mon Dec 15 17:07:13 UTC 2025 I: Signing ./b2/libconvert-scalar-perl_1.12-2_i386.buildinfo as libconvert-scalar-perl_1.12-2_i386.buildinfo.asc Mon Dec 15 17:07:13 UTC 2025 I: Signed ./b2/libconvert-scalar-perl_1.12-2_i386.buildinfo as ./b2/libconvert-scalar-perl_1.12-2_i386.buildinfo.asc Mon Dec 15 17:07:13 UTC 2025 - build #2 for libconvert-scalar-perl/trixie/i386 on ionos16-i386 done. Starting cleanup. All cleanup done. Mon Dec 15 17:07:13 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-8Q3mVzJD, removing. /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB: total 44 drwxr-xr-x 2 jenkins jenkins 4096 Nov 12 10:43 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 12 10:44 b2 -rw-r--r-- 1 jenkins jenkins 2433 Jul 30 2022 libconvert-scalar-perl_1.12-2.dsc -rw------- 1 jenkins jenkins 29475 Nov 12 10:43 rbuildlog.1dHb3pQ /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1: total 128 -rw-r--r-- 1 jenkins jenkins 25559 Nov 12 10:43 build.log -rw-r--r-- 1 jenkins jenkins 46000 Nov 12 10:43 libconvert-scalar-perl-dbgsym_1.12-2_i386.deb -rw-r--r-- 1 jenkins jenkins 2460 Nov 12 10:43 libconvert-scalar-perl_1.12-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2433 Nov 12 10:43 libconvert-scalar-perl_1.12-2.dsc -rw-r--r-- 1 jenkins jenkins 5068 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5950 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2117 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.changes -rw-r--r-- 1 jenkins jenkins 18932 Nov 12 10:43 libconvert-scalar-perl_1.12-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1925 Nov 12 10:43 libconvert-scalar-perl_1.12-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2: total 128 -rw-r--r-- 1 jenkins jenkins 27469 Nov 12 10:44 build.log -rw-r--r-- 1 jenkins jenkins 46000 Nov 12 10:44 libconvert-scalar-perl-dbgsym_1.12-2_i386.deb -rw-r--r-- 1 jenkins jenkins 2460 Nov 12 10:44 libconvert-scalar-perl_1.12-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2433 Nov 12 10:44 libconvert-scalar-perl_1.12-2.dsc -rw-r--r-- 1 jenkins jenkins 5068 Nov 12 10:44 libconvert-scalar-perl_1.12-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5950 Nov 12 10:44 libconvert-scalar-perl_1.12-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 2117 Nov 12 10:44 libconvert-scalar-perl_1.12-2_i386.changes -rw-r--r-- 1 jenkins jenkins 18932 Nov 12 10:44 libconvert-scalar-perl_1.12-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1925 Nov 12 10:44 libconvert-scalar-perl_1.12-2_source.changes Tue Nov 12 10:44:14 UTC 2024 I: Deleting $TMPDIR on ionos16-i386.debian.net. Tue Nov 12 10:44:15 UTC 2024 I: libconvert-scalar-perl_1.12-2_i386.changes: Format: 1.8 Date: Sat, 30 Jul 2022 17:31:25 +0200 Source: libconvert-scalar-perl Binary: libconvert-scalar-perl libconvert-scalar-perl-dbgsym Architecture: i386 Version: 1.12-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libconvert-scalar-perl - module to convert between different representations of perl scala Changes: libconvert-scalar-perl (1.12-2) unstable; urgency=medium . * Team upload. . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 11 to 12. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). * Remove constraints unnecessary since stretch: + Build-Depends: Drop versioned constraint on perl. * Bump debhelper from old 12 to 13. . [ gregor herrmann ] * Declare compliance with Debian Policy 4.6.1. * Set Rules-Requires-Root: no. Checksums-Sha1: 4064832d912c3121ee87a6f3bb338c02531acdcc 46000 libconvert-scalar-perl-dbgsym_1.12-2_i386.deb fb74e94e26048faf6cc0edd6938ef260910bff49 5068 libconvert-scalar-perl_1.12-2_i386.buildinfo 6c1d99bbc482dd532872f659972a2ae411ee9ce9 18932 libconvert-scalar-perl_1.12-2_i386.deb Checksums-Sha256: 319cfb788dfe4ded54ef25c220e65ecd2ff41ce94aa9aac45cb4a15e71bb338a 46000 libconvert-scalar-perl-dbgsym_1.12-2_i386.deb 497ee3bffaf55060245bbd59b87b6bc58d8929331ee3ca31ef2ebf1fb531e78e 5068 libconvert-scalar-perl_1.12-2_i386.buildinfo 0980728b3d6a54a899b3f1d1d2fc759bddbe7c33f2171065b1ab58cbb3cec68d 18932 libconvert-scalar-perl_1.12-2_i386.deb Files: 6ca5e4293919eca183879631fe4aaba3 46000 debug optional libconvert-scalar-perl-dbgsym_1.12-2_i386.deb f4982e68ec3a5feac38d5d84568b8846 5068 perl optional libconvert-scalar-perl_1.12-2_i386.buildinfo 5ea91df5e795f79d4289f3b082d2c7fc 18932 perl optional libconvert-scalar-perl_1.12-2_i386.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libconvert-scalar-perl_1.12-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libconvert-scalar-perl_1.12-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libconvert-scalar-perl_1.12-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libconvert-scalar-perl_1.12-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/i386/libconvert-scalar-perl_1.12-2_i386.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libconvert-scalar-perl_1.12-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-12 10:43:49.619047008 +0000 +++ b2/build.log 2024-11-12 10:44:14.502157627 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Mon Nov 11 22:43:15 -12 2024 -I: pbuilder-time-stamp: 1731408195 +I: Current time: Tue Dec 16 07:06:51 +14 2025 +I: pbuilder-time-stamp: 1765818411 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -28,54 +28,86 @@ dpkg-source: info: applying fix-spelling-errors.patch I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/37523/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D01_modify_environment starting +debug: Running on ionos16-i386. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Dec 15 17:07 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='i386' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='i386' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=i386 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=21 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=i686 + HOST_ARCH=i386 IFS=' ' - INVOCATION_ID='02de3122707c49c38b85b9607c1b715b' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - LD_LIBRARY_PATH='/usr/lib/libeatmydata' - LD_PRELOAD='libeatmydata.so' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='37523' - PS1='# ' - PS2='> ' + INVOCATION_ID=78a240f159d242a5a5305fd3c7344ff0 + LANG=C + LANGUAGE=de_CH:de + LC_ALL=C + LD_LIBRARY_PATH=/usr/lib/libeatmydata + LD_PRELOAD=libeatmydata.so + MACHTYPE=i686-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=48522 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_7z2K --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1 --logfile b1/build.log libconvert-scalar-perl_1.12-2.dsc' - SUDO_GID='112' - SUDO_UID='107' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://46.16.76.132:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/pbuilderrc_s9p1 --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2 --logfile b2/build.log libconvert-scalar-perl_1.12-2.dsc' + SUDO_GID=112 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://213.165.73.152:3128 I: uname -a - Linux ionos12-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/37523/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -147,7 +179,7 @@ Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libcanary-stability-perl all 2013-1 [7884 B] Get: 31 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.0-7 [1223 kB] -Fetched 21.3 MB in 0s (57.3 MB/s) +Fetched 21.3 MB in 0s (92.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) @@ -286,7 +318,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libconvert-scalar-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconvert-scalar-perl_1.12-2_source.changes +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libconvert-scalar-perl-1.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libconvert-scalar-perl_1.12-2_source.changes dpkg-buildpackage: info: source package libconvert-scalar-perl dpkg-buildpackage: info: source version 1.12-2 dpkg-buildpackage: info: source distribution unstable @@ -374,10 +410,10 @@ Writing Makefile for Convert::Scalar Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j11 + make -j21 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' -Running Mkbootstrap for Scalar () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Scalar.xs > Scalar.xsc +Running Mkbootstrap for Scalar () chmod 644 "Scalar.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 cp Scalar.pm blib/lib/Convert/Scalar.pm @@ -391,7 +427,7 @@ Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' dh_auto_test - make -j11 test TEST_VERBOSE=1 + make -j21 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t @@ -438,13 +474,13 @@ ok 4 ok All tests successful. -Files=4, Tests=30, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.10 CPU) +Files=4, Tests=30, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.04 cusr 0.00 csys = 0.06 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libconvert-scalar-perl-1.12' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libconvert-scalar-perl/ - make -j11 install DESTDIR=/build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j21 install DESTDIR=/build/reproducible-path/libconvert-scalar-perl-1.12/debian/libconvert-scalar-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libconvert-scalar-perl-1.12' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644 Manifying 1 pod document @@ -483,12 +519,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/48522/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/37523 and its subdirectories -I: Current time: Mon Nov 11 22:43:48 -12 2024 -I: pbuilder-time-stamp: 1731408228 +I: removing directory /srv/workspace/pbuilder/48522 and its subdirectories +I: Current time: Tue Dec 16 07:07:13 +14 2025 +I: pbuilder-time-stamp: 1765818433 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libconvert-scalar-perl_1.12-2.diff: 67.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libconvert-scalar-perl_1.12-2.diff.gz b2/build.log: 71.5% -- replaced with stdout Compressing the 1st log... b1/build.log: 71.9% -- replaced with stdout Tue Nov 12 10:44:16 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libconvert-scalar-perl_trixie_i386_1731408256 + touch /var/log/reproducible-builds/diffoscope_stamp_libconvert-scalar-perl_trixie_i386_1731408256 + RESULT=0 + systemd-run '--description=diffoscope on libconvert-scalar-perl/1.12-2 in trixie/i386' --slice=rb-build-diffoscope.slice -u rb-diffoscope-i386_12-27853 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB --run-session -c jenkins-reproducible-trixie-diffoscope-acc0c75f-1d1e-427b-a4c3-f0122a310b24 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/dbd-tmp-ewd498t ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/libconvert-scalar-perl_1.12-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/libconvert-scalar-perl_1.12-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/libconvert-scalar-perl_1.12-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1/libconvert-scalar-perl_1.12-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2/libconvert-scalar-perl_1.12-2_i386.changes' + false + set +x Running as unit: rb-diffoscope-i386_12-27853.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/libconvert-scalar-perl_1.12-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/libconvert-scalar-perl_1.12-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/libconvert-scalar-perl_1.12-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b1/libconvert-scalar-perl_1.12-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.wXDYwaiB/b2/libconvert-scalar-perl_1.12-2_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.391s) 0.391s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 732ms CPU time consumed: 731ms _ _ _ _ _ | (_) |__ ___ ___ _ ____ _____ _ __| |_ ___ ___ __ _| | __ _ _ __ | | | '_ \ / __/ _ \| '_ \ \ / / _ \ '__| __|____/ __|/ __/ _` | |/ _` | '__| | | | |_) | (_| (_) | | | \ V / __/ | | ||_____\__ \ (_| (_| | | (_| | | |_|_|_.__/ \___\___/|_| |_|\_/ \___|_| \__| |___/\___\__,_|_|\__,_|_| _ _ __ ___ _ __| | _____| '_ \ / _ \ '__| | |_____| |_) | __/ | | | | .__/ \___|_| |_| |_| Tue Nov 12 10:44:17 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Tue Nov 12 10:44:17 UTC 2024 I: libconvert-scalar-perl from trixie built successfully and reproducibly on i386. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-12 10:44:18] INFO: Starting at 2024-11-12 10:44:18.119056 [2024-11-12 10:44:18] INFO: Generating the pages of 1 package(s) [2024-11-12 10:44:18] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/i386/libconvert-scalar-perl didn't produce a buildlog, even though it has been built. [2024-11-12 10:44:18] INFO: Finished at 2024-11-12 10:44:18.757177, took: 0:00:00.638130 Tue Nov 12 10:44:18 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/i386/libconvert-scalar-perl.html Tue Nov 12 10:44:18 UTC 2024 I: Submitting .buildinfo files to external archives: Tue Nov 12 10:44:18 UTC 2024 I: Submitting 8.0K b1/libconvert-scalar-perl_1.12-2_i386.buildinfo.asc https://buildinfo.debian.net/fb74e94e26048faf6cc0edd6938ef260910bff49/libconvert-scalar-perl_1.12-2_i386 Tue Nov 12 10:44:19 UTC 2024 I: Submitting 8.0K b2/libconvert-scalar-perl_1.12-2_i386.buildinfo.asc https://buildinfo.debian.net/412e374b27960c580a47523045ba64d23ac717fc/libconvert-scalar-perl_1.12-2_i386 Tue Nov 12 10:44:20 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Nov 12 10:44:20 UTC 2024 I: Done submitting .buildinfo files. Tue Nov 12 10:44:20 UTC 2024 I: Removing signed libconvert-scalar-perl_1.12-2_i386.buildinfo.asc files: removed './b1/libconvert-scalar-perl_1.12-2_i386.buildinfo.asc' removed './b2/libconvert-scalar-perl_1.12-2_i386.buildinfo.asc' 1731408260 i386 trixie libconvert-scalar-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libconvert-scalar-perl_1.12-2.rbuild.log: 69.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libconvert-scalar-perl_1.12-2.rbuild.log.gz [2024-11-12 10:44:20] INFO: Starting at 2024-11-12 10:44:20.763809 [2024-11-12 10:44:20] INFO: Generating the pages of 1 package(s) [2024-11-12 10:44:21] INFO: Finished at 2024-11-12 10:44:21.240179, took: 0:00:00.476379 All cleanup done. Tue Nov 12 10:44:21 UTC 2024 - total duration: 0h 1m 24s. Tue Nov 12 10:44:21 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-f3UzRM1K, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 27.748s CPU time consumed: 8.798s