Running as unit: rb-build-i386_12-49505.service ==================================================================================== Thu Apr 24 03:21:41 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_12) on jenkins, called using "ionos12-i386 ionos16-i386" as arguments. Thu Apr 24 03:21:41 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-NaKcNShc" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Apr 24 03:21:41 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos12-i386.debian.net is marked as down. Thu Apr 24 03:21:41 UTC 2025 - checking via ssh if ionos12-i386.debian.net is up. removed '/tmp/read-only-fs-test-NAFqYN' Thu Apr 24 03:21:42 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Thu Apr 24 03:21:42 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-CVZqfs' ok, let's check if libsub-prototype-perl is building anywhere yet… ok, libsub-prototype-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libsub-prototype-perl in trixie on i386 on jenkins now. 1st build will be done on ionos12-i386.debian.net. 2nd build will be done on ionos16-i386.debian.net. ============================================================================= Thu Apr 24 03:22:04 UTC 2025 I: starting to build libsub-prototype-perl/trixie/i386 on jenkins on '2025-04-24 03:21' Thu Apr 24 03:22:04 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_12/49505/console.log 1745464924 i386 trixie libsub-prototype-perl Thu Apr 24 03:22:04 UTC 2025 I: Downloading source for trixie/libsub-prototype-perl=0.03-2 --2025-04-24 03:22:04-- http://deb.debian.org/debian/pool/main/libs/libsub-prototype-perl/libsub-prototype-perl_0.03-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2173 (2.1K) [text/prs.lines.tag] Saving to: ‘libsub-prototype-perl_0.03-2.dsc’ 0K .. 100% 302M=0s 2025-04-24 03:22:04 (302 MB/s) - ‘libsub-prototype-perl_0.03-2.dsc’ saved [2173/2173] --2025-04-24 03:22:04-- http://deb.debian.org/debian/pool/main/libs/libsub-prototype-perl/libsub-prototype-perl_0.03-2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2173 (2.1K) [text/prs.lines.tag] Saving to: ‘libsub-prototype-perl_0.03-2.dsc’ 0K .. 100% 302M=0s 2025-04-24 03:22:04 (302 MB/s) - ‘libsub-prototype-perl_0.03-2.dsc’ saved [2173/2173] Thu Apr 24 03:22:04 UTC 2025 I: libsub-prototype-perl_0.03-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libsub-prototype-perl Binary: libsub-prototype-perl Architecture: any Version: 0.03-2 Maintainer: Debian Perl Group Uploaders: Florian Schlichting Homepage: https://metacpan.org/release/Sub-Prototype Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl:native, libsub-exporter-perl Package-List: libsub-prototype-perl deb perl optional arch=any Checksums-Sha1: 86a4e19dbc8c9238e676aa19b6516a048eb19863 26103 libsub-prototype-perl_0.03.orig.tar.gz 6d2a6d02656e349a5b7b1645606c011570d914b9 2516 libsub-prototype-perl_0.03-2.debian.tar.xz Checksums-Sha256: 2b18b1d1464efea7d98b400bdc05150792dd54706418cf7d7177c26ec58691e1 26103 libsub-prototype-perl_0.03.orig.tar.gz 3ecd1f6a7f67197fa88f738f197222dea85640b8e68af1f940d1498f5e8dd678 2516 libsub-prototype-perl_0.03-2.debian.tar.xz Files: 79b4d05cca157a73980d7f8d351710b6 26103 libsub-prototype-perl_0.03.orig.tar.gz 7bd8698ed8243f56191a909c845bded7 2516 libsub-prototype-perl_0.03-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmOPdfQACgkQV5wWDUye I+i/Sw//XNMAn+wzQpNigswjECT9wbf2B2zLR4wVLgeHJrS4/AF+txDgiO1SwFJ9 nOF72jqnO+i/bKQBGQJlTaLf9i/KtyyyPiwr+3xG7xZOFf4djwJ4H6tjWP+8kD4s pm+G5n2/N9YR/yZcewrtji7Jkt1Rc7Xz5jcPdkjCTpKfSNw0N5hnAntbGqR8shVr bX7JWNiK1RWqU4KVrypgCk5bVf0N03Fk+BWS07cxIjMA+FL6zGeqmm4xVkO/kJNY xa17A1gh7dNCNsgjXFKpeda5XyV+cugU7VMG245PqgWHE2RCT+b4kmfp6lfeQl+F RQvlXaQ09kG57xepZIz05DIYNYx/75pqlKz5xk/p5y54RQ69zS0lTnNdj510mpEt hw71sM0nkjQFMxbzxW/PlePCV8rpc3HNTilUcBCiY55ccSAtjtS32XOSOIPbsbdZ nq7OTRxdipvmKpUQ84xlHOQzK0VgtQvzxwgZH8nT+6Uwcf7ufq7EHoHAviobtDul Eirtw3mJF5xCyuPhiaCpQwIzbpKXeiaJ/SbB1INk6Y6MVSXALwyQDEXpVBOvzwSZ 3VNJM1Bsj7kVg2mO8XcXfCWu45NUnbvuWthHo2dO10aariqfFCToVbhp4ssGz2EC BXEf/fJd/BIqz/DK9Mf/S8R8YkIqz0lxUv8CELVWqgHNwG5Bm1c= =fpDJ -----END PGP SIGNATURE----- Thu Apr 24 03:22:04 UTC 2025 I: Checking whether the package is not for us Thu Apr 24 03:22:05 UTC 2025 I: Starting 1st build on remote node ionos12-i386.debian.net. Thu Apr 24 03:22:05 UTC 2025 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Thu Apr 24 03:22:05 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos12-i386.debian.net is marked as down. Thu Apr 24 03:22:05 UTC 2025 - checking via ssh if ionos12-i386.debian.net is up. removed '/tmp/read-only-fs-test-3YmpRv' ==================================================================================== Thu Apr 24 03:22:05 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos12-i386, called using "1 libsub-prototype-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u 0.03-2" as arguments. Thu Apr 24 03:22:05 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-ahhRo1jp" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Apr 24 03:22:06 UTC 2025 I: Downloading source for trixie/libsub-prototype-perl=0.03-2 Reading package lists... NOTICE: 'libsub-prototype-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (dsc) [2173 B] Get:2 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (tar) [26.1 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (diff) [2516 B] Fetched 30.8 kB in 0s (1802 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libsub-prototype-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (dsc) [2173 B] Get:2 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (tar) [26.1 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (diff) [2516 B] Fetched 30.8 kB in 0s (1802 kB/s) Download complete and in download only mode ============================================================================= Building libsub-prototype-perl in trixie on i386 on ionos12-i386 now. Date: Thu Apr 24 05:22:06 CEST 2025 Date UTC: Thu Apr 24 03:22:06 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Apr 23 15:22:06 -12 2025 I: pbuilder-time-stamp: 1745464926 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libsub-prototype-perl_0.03-2.dsc] I: copying [./libsub-prototype-perl_0.03.orig.tar.gz] I: copying [./libsub-prototype-perl_0.03-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libsub-prototype-perl_0.03-2.dsc: unsupported subcommand dpkg-source: info: extracting libsub-prototype-perl in libsub-prototype-perl-0.03 dpkg-source: info: unpacking libsub-prototype-perl_0.03.orig.tar.gz dpkg-source: info: unpacking libsub-prototype-perl_0.03-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/103057/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=24 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='ae076f3c91674932af071c60e7f73223' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='103057' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_RT4f --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1 --logfile b1/build.log libsub-prototype-perl_0.03-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos12-i386 6.1.0-33-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.133-1 (2025-04-10) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/103057/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native, libsub-exporter-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libparams-util-perl{a} libperl-dev{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 12.6 MB of archives. After unpacking 48.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.46-5 [117 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.46-5 [43.5 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.41-4 [98.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libparams-util-perl i386 1.102-3+b1 [24.7 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-3 [1220 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libsub-exporter-perl all 0.990-1 [50.6 kB] Fetched 12.6 MB in 0s (31.9 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_i386.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_i386.deb ... Unpacking libmagic1t64:i386 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_i386.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_i386.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../29-libparams-util-perl_1.102-3+b1_i386.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../30-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../31-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../32-libperl-dev_5.40.1-3_i386.deb ... Unpacking libperl-dev:i386 (5.40.1-3) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../33-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:i386 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:i386 (5.40.1-3) ... Setting up file (1:5.46-5) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libsub-prototype-perl-0.03/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsub-prototype-perl_0.03-2_source.changes dpkg-buildpackage: info: source package libsub-prototype-perl dpkg-buildpackage: info: source version 0.03-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sub::Prototype Writing MYMETA.yml and MYMETA.json dh_auto_build make -j24 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' Running Mkbootstrap for Prototype () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Prototype.xs > Prototype.xsc chmod 644 "Prototype.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 cp lib/Sub/Prototype.pm blib/lib/Sub/Prototype.pm Please specify prototyping behavior for Prototype.xs (see perlxs manual) mv Prototype.xsc Prototype.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" Prototype.c rm -f blib/arch/auto/Sub/Prototype/Prototype.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Prototype.o -o blib/arch/auto/Sub/Prototype/Prototype.so \ \ chmod 755 blib/arch/auto/Sub/Prototype/Prototype.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_auto_test make -j24 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Spec any 3.91 # Test::More any 1.302199 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- ---- ----- # Sub::Exporter any 0.990 # XSLoader any 0.32 # strict any 1.13 # warnings any 1.70 # # === Other Modules === # # Module Have # --------------- ------- # Encode 3.21 # File::Temp 0.2311 # JSON::PP 4.16 # Module::Runtime missing # Pod::Coverage missing # Sub::Name missing # YAML missing # autodie 2.37 # t/00-report-prereqs.t .. 1..1 ok 1 ok t/basic.t .............. 1..4 ok 1 ok 2 ok 3 ok 4 ok All tests successful. Files=2, Tests=5, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.26 cusr 0.00 csys = 0.28 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-prototype-perl/ make -j24 install DESTDIR=/build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Sub/Prototype/Prototype.so Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/lib/i386-linux-gnu/perl5/5.40/Sub/Prototype.pm Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/share/man/man3/Sub::Prototype.3pm make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsub-prototype-perl' in '../libsub-prototype-perl_0.03-2_i386.deb'. dpkg-deb: building package 'libsub-prototype-perl-dbgsym' in '../libsub-prototype-perl-dbgsym_0.03-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libsub-prototype-perl_0.03-2_i386.buildinfo dpkg-genchanges --build=binary -O../libsub-prototype-perl_0.03-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/103057 and its subdirectories I: Current time: Wed Apr 23 15:22:28 -12 2025 I: pbuilder-time-stamp: 1745464948 Thu Apr 24 03:22:28 UTC 2025 I: Signing ./b1/libsub-prototype-perl_0.03-2_i386.buildinfo as libsub-prototype-perl_0.03-2_i386.buildinfo.asc Thu Apr 24 03:22:28 UTC 2025 I: Signed ./b1/libsub-prototype-perl_0.03-2_i386.buildinfo as ./b1/libsub-prototype-perl_0.03-2_i386.buildinfo.asc Thu Apr 24 03:22:28 UTC 2025 - build #1 for libsub-prototype-perl/trixie/i386 on ionos12-i386 done. Starting cleanup. All cleanup done. Thu Apr 24 03:22:28 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-ahhRo1jp, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Apr 24 03:22 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 24 03:22 b2 -rw-r--r-- 1 jenkins jenkins 2173 Dec 6 2022 libsub-prototype-perl_0.03-2.dsc -rw------- 1 jenkins jenkins 3363 Apr 24 03:22 rbuildlog.P73A9xM /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1: total 96 -rw-r--r-- 1 jenkins jenkins 24628 Apr 24 03:22 build.log -rw-r--r-- 1 jenkins jenkins 23908 Apr 24 03:22 libsub-prototype-perl-dbgsym_0.03-2_i386.deb -rw-r--r-- 1 jenkins jenkins 2516 Apr 24 03:22 libsub-prototype-perl_0.03-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2173 Apr 24 03:22 libsub-prototype-perl_0.03-2.dsc -rw-r--r-- 1 jenkins jenkins 5087 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5969 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1699 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.changes -rw-r--r-- 1 jenkins jenkins 9488 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1540 Apr 24 03:22 libsub-prototype-perl_0.03-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2: total 0 Thu Apr 24 03:22:29 UTC 2025 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Apr 23 15:22:06 -12 2025 I: pbuilder-time-stamp: 1745464926 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libsub-prototype-perl_0.03-2.dsc] I: copying [./libsub-prototype-perl_0.03.orig.tar.gz] I: copying [./libsub-prototype-perl_0.03-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libsub-prototype-perl_0.03-2.dsc: unsupported subcommand dpkg-source: info: extracting libsub-prototype-perl in libsub-prototype-perl-0.03 dpkg-source: info: unpacking libsub-prototype-perl_0.03.orig.tar.gz dpkg-source: info: unpacking libsub-prototype-perl_0.03-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/103057/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=24 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='ae076f3c91674932af071c60e7f73223' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='103057' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_RT4f --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1 --logfile b1/build.log libsub-prototype-perl_0.03-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos12-i386 6.1.0-33-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.133-1 (2025-04-10) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/103057/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native, libsub-exporter-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libparams-util-perl{a} libperl-dev{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 12.6 MB of archives. After unpacking 48.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.46-5 [117 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.46-5 [43.5 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.41-4 [98.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libparams-util-perl i386 1.102-3+b1 [24.7 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-3 [1220 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libsub-exporter-perl all 0.990-1 [50.6 kB] Fetched 12.6 MB in 0s (31.9 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_i386.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_i386.deb ... Unpacking libmagic1t64:i386 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_i386.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_i386.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../29-libparams-util-perl_1.102-3+b1_i386.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../30-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../31-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../32-libperl-dev_5.40.1-3_i386.deb ... Unpacking libperl-dev:i386 (5.40.1-3) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../33-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:i386 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:i386 (5.40.1-3) ... Setting up file (1:5.46-5) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libsub-prototype-perl-0.03/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsub-prototype-perl_0.03-2_source.changes dpkg-buildpackage: info: source package libsub-prototype-perl dpkg-buildpackage: info: source version 0.03-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sub::Prototype Writing MYMETA.yml and MYMETA.json dh_auto_build make -j24 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' Running Mkbootstrap for Prototype () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Prototype.xs > Prototype.xsc chmod 644 "Prototype.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 cp lib/Sub/Prototype.pm blib/lib/Sub/Prototype.pm Please specify prototyping behavior for Prototype.xs (see perlxs manual) mv Prototype.xsc Prototype.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" Prototype.c rm -f blib/arch/auto/Sub/Prototype/Prototype.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Prototype.o -o blib/arch/auto/Sub/Prototype/Prototype.so \ \ chmod 755 blib/arch/auto/Sub/Prototype/Prototype.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_auto_test make -j24 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Spec any 3.91 # Test::More any 1.302199 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- ---- ----- # Sub::Exporter any 0.990 # XSLoader any 0.32 # strict any 1.13 # warnings any 1.70 # # === Other Modules === # # Module Have # --------------- ------- # Encode 3.21 # File::Temp 0.2311 # JSON::PP 4.16 # Module::Runtime missing # Pod::Coverage missing # Sub::Name missing # YAML missing # autodie 2.37 # t/00-report-prereqs.t .. 1..1 ok 1 ok t/basic.t .............. 1..4 ok 1 ok 2 ok 3 ok 4 ok All tests successful. Files=2, Tests=5, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.26 cusr 0.00 csys = 0.28 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-prototype-perl/ make -j24 install DESTDIR=/build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Sub/Prototype/Prototype.so Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/lib/i386-linux-gnu/perl5/5.40/Sub/Prototype.pm Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/share/man/man3/Sub::Prototype.3pm make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsub-prototype-perl' in '../libsub-prototype-perl_0.03-2_i386.deb'. dpkg-deb: building package 'libsub-prototype-perl-dbgsym' in '../libsub-prototype-perl-dbgsym_0.03-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libsub-prototype-perl_0.03-2_i386.buildinfo dpkg-genchanges --build=binary -O../libsub-prototype-perl_0.03-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/103057 and its subdirectories I: Current time: Wed Apr 23 15:22:28 -12 2025 I: pbuilder-time-stamp: 1745464948 Thu Apr 24 03:22:29 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ionos16-i386.debian.net. Thu Apr 24 03:22:29 UTC 2025 I: Preparing to do remote build '2' on ionos16-i386.debian.net. Thu Apr 24 03:22:29 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Thu Apr 24 03:22:29 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-UOUB48' ==================================================================================== Wed May 27 09:45:30 UTC 2026 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos16-i386, called using "2 libsub-prototype-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u 0.03-2" as arguments. Wed May 27 09:45:30 UTC 2026 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-Yhp18SbS" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed May 27 09:45:30 UTC 2026 I: Downloading source for trixie/libsub-prototype-perl=0.03-2 Reading package lists... NOTICE: 'libsub-prototype-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (dsc) [2173 B] Get:2 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (tar) [26.1 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (diff) [2516 B] Fetched 30.8 kB in 0s (1977 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libsub-prototype-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libsub-prototype-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.8 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (dsc) [2173 B] Get:2 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (tar) [26.1 kB] Get:3 http://deb.debian.org/debian trixie/main libsub-prototype-perl 0.03-2 (diff) [2516 B] Fetched 30.8 kB in 0s (1977 kB/s) Download complete and in download only mode ============================================================================= Re-Building libsub-prototype-perl in trixie on i386 on ionos16-i386 now. Date: Wed May 27 11:45:31 CEST 2026 Date UTC: Wed May 27 09:45:31 UTC 2026 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_pfWa + case ${ARCH} in + let NUM_CPU-=3 + case $ARCH in + locale=de_CH + language=de + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libsub-prototype-perl = debian-installer -o libsub-prototype-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libsub-prototype-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_pfWa --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2 --logfile b2/build.log libsub-prototype-perl_0.03-2.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed May 27 23:45:31 +14 2026 I: pbuilder-time-stamp: 1779875131 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libsub-prototype-perl_0.03-2.dsc] I: copying [./libsub-prototype-perl_0.03.orig.tar.gz] I: copying [./libsub-prototype-perl_0.03-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libsub-prototype-perl_0.03-2.dsc: unsupported subcommand dpkg-source: info: extracting libsub-prototype-perl in libsub-prototype-perl-0.03 dpkg-source: info: unpacking libsub-prototype-perl_0.03.orig.tar.gz dpkg-source: info: unpacking libsub-prototype-perl_0.03-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D01_modify_environment starting debug: Running on ionos16-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 May 27 09:45 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.37(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=21 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=bb699943d9de4c00bf9f50d0260dc2a7 LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=6938 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_pfWa --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2 --logfile b2/build.log libsub-prototype-perl_0.03-2.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://213.165.73.152:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-33-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.133-1 (2025-04-10) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl-xs-dev, perl:native, libsub-exporter-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. pbuilder-satisfydepends-dummy depends on libsub-exporter-perl; however: Package libsub-exporter-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libparams-util-perl{a} libperl-dev{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 12.6 MB of archives. After unpacking 48.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.46-5 [117 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.46-5 [43.5 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.23.1-1 [245 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.41-4 [98.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-7 [301 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.24.2 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-2 [471 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.4 [732 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.23.1-1 [1714 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.24.2 [919 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 libparams-util-perl i386 1.102-3+b1 [24.7 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libsub-install-perl all 0.929-1 [10.5 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-3 [1220 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libsub-exporter-perl all 0.990-1 [50.6 kB] Fetched 12.6 MB in 0s (101 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_i386.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_i386.deb ... Unpacking libmagic1t64:i386 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_i386.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_i386.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-4_i386.deb ... Unpacking bsdextrautils (2.41-4) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_i386.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../23-libunistring5_1.3-2_i386.deb ... Unpacking libunistring5:i386 (1.3-2) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.4_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-1_i386.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../29-libparams-util-perl_1.102-3+b1_i386.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../30-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../31-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../32-libperl-dev_5.40.1-3_i386.deb ... Unpacking libperl-dev:i386 (5.40.1-3) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../33-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up bsdextrautils (2.41-4) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:i386 (1:5.46-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:i386 (5.40.1-3) ... Setting up file (1:5.46-5) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:i386 (1.3-2) ... Setting up autopoint (0.23.1-1) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.4) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-7) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/6938/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/6938/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libsub-prototype-perl-0.03/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libsub-prototype-perl_0.03-2_source.changes dpkg-buildpackage: info: source package libsub-prototype-perl dpkg-buildpackage: info: source version 0.03-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sub::Prototype Writing MYMETA.yml and MYMETA.json dh_auto_build make -j21 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Prototype.xs > Prototype.xsc Running Mkbootstrap for Prototype () chmod 644 "Prototype.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 cp lib/Sub/Prototype.pm blib/lib/Sub/Prototype.pm Please specify prototyping behavior for Prototype.xs (see perlxs manual) mv Prototype.xsc Prototype.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.40/CORE" Prototype.c rm -f blib/arch/auto/Sub/Prototype/Prototype.so i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libsub-prototype-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Prototype.o -o blib/arch/auto/Sub/Prototype/Prototype.so \ \ chmod 755 blib/arch/auto/Sub/Prototype/Prototype.so Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_auto_test make -j21 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Spec any 3.91 # Test::More any 1.302199 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------- ---- ----- # Sub::Exporter any 0.990 # XSLoader any 0.32 # strict any 1.13 # warnings any 1.70 # # === Other Modules === # # Module Have # --------------- ------- # Encode 3.21 # File::Temp 0.2311 # JSON::PP 4.16 # Module::Runtime missing # Pod::Coverage missing # Sub::Name missing # YAML missing # autodie 2.37 # t/00-report-prereqs.t .. 1..1 ok 1 ok t/basic.t .............. 1..4 ok 1 ok 2 ok 3 ok 4 ok All tests successful. Files=2, Tests=5, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.28 cusr 0.04 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-prototype-perl/ make -j21 install DESTDIR=/build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/lib/i386-linux-gnu/perl5/5.40/auto/Sub/Prototype/Prototype.so Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/lib/i386-linux-gnu/perl5/5.40/Sub/Prototype.pm Installing /build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl/usr/share/man/man3/Sub::Prototype.3pm make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsub-prototype-perl-dbgsym' in '../libsub-prototype-perl-dbgsym_0.03-2_i386.deb'. dpkg-deb: building package 'libsub-prototype-perl' in '../libsub-prototype-perl_0.03-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libsub-prototype-perl_0.03-2_i386.buildinfo dpkg-genchanges --build=binary -O../libsub-prototype-perl_0.03-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/6938/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/6938/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/6938 and its subdirectories I: Current time: Wed May 27 23:46:06 +14 2026 I: pbuilder-time-stamp: 1779875166 + false + set +x Wed May 27 09:46:06 UTC 2026 I: Signing ./b2/libsub-prototype-perl_0.03-2_i386.buildinfo as libsub-prototype-perl_0.03-2_i386.buildinfo.asc Wed May 27 09:46:06 UTC 2026 I: Signed ./b2/libsub-prototype-perl_0.03-2_i386.buildinfo as ./b2/libsub-prototype-perl_0.03-2_i386.buildinfo.asc Wed May 27 09:46:06 UTC 2026 - build #2 for libsub-prototype-perl/trixie/i386 on ionos16-i386 done. Starting cleanup. All cleanup done. Wed May 27 09:46:06 UTC 2026 - reproducible_build.sh stopped running as /tmp/jenkins-script-Yhp18SbS, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Apr 24 03:22 b1 drwxr-xr-x 2 jenkins jenkins 4096 Apr 24 03:23 b2 -rw-r--r-- 1 jenkins jenkins 2173 Dec 6 2022 libsub-prototype-perl_0.03-2.dsc -rw------- 1 jenkins jenkins 28277 Apr 24 03:22 rbuildlog.P73A9xM /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1: total 96 -rw-r--r-- 1 jenkins jenkins 24628 Apr 24 03:22 build.log -rw-r--r-- 1 jenkins jenkins 23908 Apr 24 03:22 libsub-prototype-perl-dbgsym_0.03-2_i386.deb -rw-r--r-- 1 jenkins jenkins 2516 Apr 24 03:22 libsub-prototype-perl_0.03-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2173 Apr 24 03:22 libsub-prototype-perl_0.03-2.dsc -rw-r--r-- 1 jenkins jenkins 5087 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5969 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1699 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.changes -rw-r--r-- 1 jenkins jenkins 9488 Apr 24 03:22 libsub-prototype-perl_0.03-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1540 Apr 24 03:22 libsub-prototype-perl_0.03-2_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2: total 96 -rw-r--r-- 1 jenkins jenkins 26523 Apr 24 03:23 build.log -rw-r--r-- 1 jenkins jenkins 23908 Apr 24 03:23 libsub-prototype-perl-dbgsym_0.03-2_i386.deb -rw-r--r-- 1 jenkins jenkins 2516 Apr 24 03:23 libsub-prototype-perl_0.03-2.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2173 Apr 24 03:23 libsub-prototype-perl_0.03-2.dsc -rw-r--r-- 1 jenkins jenkins 5087 Apr 24 03:23 libsub-prototype-perl_0.03-2_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5969 Apr 24 03:23 libsub-prototype-perl_0.03-2_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1699 Apr 24 03:23 libsub-prototype-perl_0.03-2_i386.changes -rw-r--r-- 1 jenkins jenkins 9488 Apr 24 03:23 libsub-prototype-perl_0.03-2_i386.deb -rw-r--r-- 1 jenkins jenkins 1540 Apr 24 03:23 libsub-prototype-perl_0.03-2_source.changes Thu Apr 24 03:23:07 UTC 2025 I: Deleting $TMPDIR on ionos16-i386.debian.net. Thu Apr 24 03:23:07 UTC 2025 I: libsub-prototype-perl_0.03-2_i386.changes: Format: 1.8 Date: Tue, 06 Dec 2022 17:02:52 +0000 Source: libsub-prototype-perl Binary: libsub-prototype-perl libsub-prototype-perl-dbgsym Architecture: i386 Version: 0.03-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libsub-prototype-perl - module to set a subroutine's prototype Changes: libsub-prototype-perl (0.03-2) unstable; urgency=medium . [ gregor herrmann ] * Update 'DEB_BUILD_MAINT_OPTIONS = hardening=+bindnow' to '=+all'. . [ Debian Janitor ] * Bump debhelper from old 12 to 13. * Update standards version to 4.5.1, no changes needed. * Update standards version to 4.6.0, no changes needed. Checksums-Sha1: 0cc03b59f50d1746f4f1233baf26515bb49970ca 23908 libsub-prototype-perl-dbgsym_0.03-2_i386.deb 696a61f3161ed252a619f4fa8c6a4bd272cc1d71 5087 libsub-prototype-perl_0.03-2_i386.buildinfo c59eba85987ca513739629726166e993b1c215d8 9488 libsub-prototype-perl_0.03-2_i386.deb Checksums-Sha256: 50b0c1ed1f86b7be471eb30f25af78667a68f382570b3ef8d505c5a49b4fbf42 23908 libsub-prototype-perl-dbgsym_0.03-2_i386.deb f9eb79e159cffb7e54e235757b6af24587ec6746423bba2834429713728e096a 5087 libsub-prototype-perl_0.03-2_i386.buildinfo 054e79aecc967c90a0c6b2dd9baa675bd33b1482c5c4e19c940aa5c62533c373 9488 libsub-prototype-perl_0.03-2_i386.deb Files: a52d02e39d3898e0124980adafda6fab 23908 debug optional libsub-prototype-perl-dbgsym_0.03-2_i386.deb 1919ead046c9eb2211338def768aed84 5087 perl optional libsub-prototype-perl_0.03-2_i386.buildinfo bc8c464823fad3c6e55147a917082371 9488 perl optional libsub-prototype-perl_0.03-2_i386.deb removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libsub-prototype-perl_0.03-2.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libsub-prototype-perl_0.03-2.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libsub-prototype-perl_0.03-2.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libsub-prototype-perl_0.03-2.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/i386/libsub-prototype-perl_0.03-2_i386.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libsub-prototype-perl_0.03-2.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2025-04-24 03:22:29.252209027 +0000 +++ b2/build.log 2025-04-24 03:23:07.219401421 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Wed Apr 23 15:22:06 -12 2025 -I: pbuilder-time-stamp: 1745464926 +I: Current time: Wed May 27 23:45:31 +14 2026 +I: pbuilder-time-stamp: 1779875131 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -23,54 +23,86 @@ dpkg-source: info: unpacking libsub-prototype-perl_0.03-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/103057/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D01_modify_environment starting +debug: Running on ionos16-i386. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 May 27 09:45 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='i386' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=24 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='i386' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="37" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") + BASH_VERSION='5.2.37(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=i386 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=21 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=i686 + HOST_ARCH=i386 IFS=' ' - INVOCATION_ID='ae076f3c91674932af071c60e7f73223' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - LD_LIBRARY_PATH='/usr/lib/libeatmydata' - LD_PRELOAD='libeatmydata.so' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='103057' - PS1='# ' - PS2='> ' + INVOCATION_ID=bb699943d9de4c00bf9f50d0260dc2a7 + LANG=C + LANGUAGE=de_CH:de + LC_ALL=C + LD_LIBRARY_PATH=/usr/lib/libeatmydata + LD_PRELOAD=libeatmydata.so + MACHTYPE=i686-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=6938 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_RT4f --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1 --logfile b1/build.log libsub-prototype-perl_0.03-2.dsc' - SUDO_GID='112' - SUDO_UID='107' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://46.16.76.132:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/pbuilderrc_pfWa --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2 --logfile b2/build.log libsub-prototype-perl_0.03-2.dsc' + SUDO_GID=112 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://213.165.73.152:3128 I: uname -a - Linux ionos12-i386 6.1.0-33-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.133-1 (2025-04-10) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-33-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.133-1 (2025-04-10) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/103057/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Mar 4 2025 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -145,7 +177,7 @@ Get: 32 http://deb.debian.org/debian trixie/main i386 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libperl-dev i386 5.40.1-3 [1220 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libsub-exporter-perl all 0.990-1 [50.6 kB] -Fetched 12.6 MB in 0s (31.9 MB/s) +Fetched 12.6 MB in 0s (101 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) @@ -296,7 +328,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libsub-prototype-perl-0.03/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libsub-prototype-perl_0.03-2_source.changes +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libsub-prototype-perl-0.03/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libsub-prototype-perl_0.03-2_source.changes dpkg-buildpackage: info: source package libsub-prototype-perl dpkg-buildpackage: info: source version 0.03-2 dpkg-buildpackage: info: source distribution unstable @@ -318,10 +354,10 @@ Writing Makefile for Sub::Prototype Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j24 + make -j21 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' -Running Mkbootstrap for Prototype () "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Prototype.xs > Prototype.xsc +Running Mkbootstrap for Prototype () chmod 644 "Prototype.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 cp lib/Sub/Prototype.pm blib/lib/Sub/Prototype.pm @@ -336,7 +372,7 @@ Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' dh_auto_test - make -j24 test TEST_VERBOSE=1 + make -j21 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t @@ -403,13 +439,13 @@ ok 4 ok All tests successful. -Files=2, Tests=5, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.26 cusr 0.00 csys = 0.28 CPU) +Files=2, Tests=5, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.28 cusr 0.04 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libsub-prototype-perl-0.03' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsub-prototype-perl/ - make -j24 install DESTDIR=/build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j21 install DESTDIR=/build/reproducible-path/libsub-prototype-perl-0.03/debian/libsub-prototype-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libsub-prototype-perl-0.03' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prototype.bs blib/arch/auto/Sub/Prototype/Prototype.bs 644 Manifying 1 pod document @@ -439,8 +475,8 @@ dh_gencontrol dh_md5sums dh_builddeb -dpkg-deb: building package 'libsub-prototype-perl' in '../libsub-prototype-perl_0.03-2_i386.deb'. dpkg-deb: building package 'libsub-prototype-perl-dbgsym' in '../libsub-prototype-perl-dbgsym_0.03-2_i386.deb'. +dpkg-deb: building package 'libsub-prototype-perl' in '../libsub-prototype-perl_0.03-2_i386.deb'. dpkg-genbuildinfo --build=binary -O../libsub-prototype-perl_0.03-2_i386.buildinfo dpkg-genchanges --build=binary -O../libsub-prototype-perl_0.03-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) @@ -448,12 +484,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/6938/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/103057 and its subdirectories -I: Current time: Wed Apr 23 15:22:28 -12 2025 -I: pbuilder-time-stamp: 1745464948 +I: removing directory /srv/workspace/pbuilder/6938 and its subdirectories +I: Current time: Wed May 27 23:46:06 +14 2026 +I: pbuilder-time-stamp: 1779875166 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libsub-prototype-perl_0.03-2.diff: 68.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libsub-prototype-perl_0.03-2.diff.gz b2/build.log: 73.9% -- replaced with stdout Compressing the 1st log... b1/build.log: 74.6% -- replaced with stdout Thu Apr 24 03:23:08 UTC 2025 I: diffoscope 294 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libsub-prototype-perl_trixie_i386_1745464988 + touch /var/log/reproducible-builds/diffoscope_stamp_libsub-prototype-perl_trixie_i386_1745464988 + RESULT=0 + systemd-run '--description=diffoscope on libsub-prototype-perl/0.03-2 in trixie/i386' --slice=rb-build-diffoscope.slice -u rb-diffoscope-i386_12-49505 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u --run-session -c jenkins-reproducible-trixie-diffoscope-c45e50e9-675a-45dd-8440-cc154503b51a -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/dbd-tmp-5JDSol1 ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/libsub-prototype-perl_0.03-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/libsub-prototype-perl_0.03-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/libsub-prototype-perl_0.03-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1/libsub-prototype-perl_0.03-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2/libsub-prototype-perl_0.03-2_i386.changes' + false + set +x Running as unit: rb-diffoscope-i386_12-49505.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/libsub-prototype-perl_0.03-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/libsub-prototype-perl_0.03-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/libsub-prototype-perl_0.03-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b1/libsub-prototype-perl_0.03-2_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.Hgm9rQ3u/b2/libsub-prototype-perl_0.03-2_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 235ms CPU time consumed: 232ms _ _ _ _ _ _ | (_) |__ ___ _ _| |__ _ __ _ __ ___ | |_ ___ | |_ _ _ _ __ ___ | | | '_ \/ __| | | | '_ \ _____| '_ \| '__/ _ \| __/ _ \| __| | | | '_ \ / _ \ | | | |_) \__ \ |_| | |_) |_____| |_) | | | (_) | || (_) | |_| |_| | |_) | __/ |_|_|_.__/|___/\__,_|_.__/ | .__/|_| \___/ \__\___/ \__|\__, | .__/ \___| |_| |___/|_| _ _ __ ___ _ __| | _____| '_ \ / _ \ '__| | |_____| |_) | __/ | | | | .__/ \___|_| |_| |_| Thu Apr 24 03:23:09 UTC 2025 I: diffoscope 294 found no differences in the changes files, and a .buildinfo file also exists. Thu Apr 24 03:23:09 UTC 2025 I: libsub-prototype-perl from trixie built successfully and reproducibly on i386. INSERT 0 1 INSERT 0 1 DELETE 1 [2025-04-24 03:23:09] INFO: Starting at 2025-04-24 03:23:09.767790 [2025-04-24 03:23:09] INFO: Generating the pages of 1 package(s) [2025-04-24 03:23:10] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/i386/libsub-prototype-perl didn't produce a buildlog, even though it has been built. [2025-04-24 03:23:10] INFO: Finished at 2025-04-24 03:23:10.205114, took: 0:00:00.437330 Thu Apr 24 03:23:10 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/i386/libsub-prototype-perl.html Thu Apr 24 03:23:10 UTC 2025 I: Submitting .buildinfo files to external archives: Thu Apr 24 03:23:10 UTC 2025 I: Submitting 8.0K b1/libsub-prototype-perl_0.03-2_i386.buildinfo.asc https://buildinfo.debian.net/696a61f3161ed252a619f4fa8c6a4bd272cc1d71/libsub-prototype-perl_0.03-2_i386 Thu Apr 24 03:23:24 UTC 2025 I: Submitting 8.0K b2/libsub-prototype-perl_0.03-2_i386.buildinfo.asc https://buildinfo.debian.net/4327d9a0264e0e190ac589950b621b58fb6c38bd/libsub-prototype-perl_0.03-2_i386 Thu Apr 24 03:23:39 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Apr 24 03:23:39 UTC 2025 I: Done submitting .buildinfo files. Thu Apr 24 03:23:39 UTC 2025 I: Removing signed libsub-prototype-perl_0.03-2_i386.buildinfo.asc files: removed './b1/libsub-prototype-perl_0.03-2_i386.buildinfo.asc' removed './b2/libsub-prototype-perl_0.03-2_i386.buildinfo.asc' 1745465019 i386 trixie libsub-prototype-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libsub-prototype-perl_0.03-2.rbuild.log: 71.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libsub-prototype-perl_0.03-2.rbuild.log.gz [2025-04-24 03:23:40] INFO: Starting at 2025-04-24 03:23:40.083370 [2025-04-24 03:23:40] INFO: Generating the pages of 1 package(s) [2025-04-24 03:23:40] INFO: Finished at 2025-04-24 03:23:40.493411, took: 0:00:00.410047 All cleanup done. Thu Apr 24 03:23:40 UTC 2025 - total duration: 0h 1m 28s. Thu Apr 24 03:23:40 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-NaKcNShc, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 59.334s CPU time consumed: 6.779s