Running as unit: rb-build-i386_3-51270.service ==================================================================================== Wed Jan 22 20:19:50 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_3) on jenkins, called using "ionos2-i386 ionos16-i386" as arguments. Wed Jan 22 20:19:50 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-ap0YdjkD" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Jan 22 20:19:50 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Wed Jan 22 20:19:50 UTC 2025 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-ElvGch' Wed Jan 22 20:19:51 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Wed Jan 22 20:19:51 UTC 2025 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-2J99Ai' ok, let's check if freezegun is building anywhere yet… ok, freezegun is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of freezegun in trixie on i386 on jenkins now. 1st build will be done on ionos2-i386.debian.net. 2nd build will be done on ionos16-i386.debian.net. ============================================================================= Wed Jan 22 20:20:13 UTC 2025 I: starting to build freezegun/trixie/i386 on jenkins on '2025-01-22 20:19' Wed Jan 22 20:20:13 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_3/51270/console.log 1737577213 i386 trixie freezegun Wed Jan 22 20:20:13 UTC 2025 I: Downloading source for trixie/freezegun=1.5.1-1.2 --2025-01-22 20:20:14-- http://deb.debian.org/debian/pool/main/f/freezegun/freezegun_1.5.1-1.2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2166 (2.1K) [text/prs.lines.tag] Saving to: ‘freezegun_1.5.1-1.2.dsc’ 0K .. 100% 361M=0s 2025-01-22 20:20:14 (361 MB/s) - ‘freezegun_1.5.1-1.2.dsc’ saved [2166/2166] --2025-01-22 20:20:14-- http://deb.debian.org/debian/pool/main/f/freezegun/freezegun_1.5.1-1.2.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2166 (2.1K) [text/prs.lines.tag] Saving to: ‘freezegun_1.5.1-1.2.dsc’ 0K .. 100% 361M=0s 2025-01-22 20:20:14 (361 MB/s) - ‘freezegun_1.5.1-1.2.dsc’ saved [2166/2166] Wed Jan 22 20:20:14 UTC 2025 I: freezegun_1.5.1-1.2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: freezegun Binary: python3-freezegun Architecture: all Version: 1.5.1-1.2 Maintainer: Federico Ceratto Homepage: https://github.com/spulec/freezegun Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/debian/python-freezegun Vcs-Git: https://salsa.debian.org/debian/python-freezegun.git Testsuite: autopkgtest Testsuite-Triggers: python3-pytest Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: dh-python, python3-all, python3-coverage, python3-dateutil, python3-pytest, python3-setuptools Package-List: python3-freezegun deb python optional arch=all Checksums-Sha1: 7a4d15ad70aa0f7763b63706c910af62c64483ab 31227 freezegun_1.5.1.orig.tar.gz 8f250fa88af62d7f6bc7592e94fc1c3a22b5760b 3256 freezegun_1.5.1-1.2.debian.tar.xz Checksums-Sha256: 0144ed30db4516270d4676e17d410051a6213c339758bd0b877a4303b650e8bd 31227 freezegun_1.5.1.orig.tar.gz 4c454055aba516c49edc2acf28af718fae8a5f2d4d462bc5adc1c933ee9c85b8 3256 freezegun_1.5.1-1.2.debian.tar.xz Files: 9a4445ff33dfaf022d3c7a587f8f6cd9 31227 freezegun_1.5.1.orig.tar.gz a809e234a99fa973eb049c11052a6448 3256 freezegun_1.5.1-1.2.debian.tar.xz Dgit: 5c3f9a54b833456b31b554761d7faa3447914ec7 debian archive/debian/1.5.1-1.2 https://git.dgit.debian.org/freezegun -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEErApP8SYRtvzPAcEROTWH2X2GUAsFAmeOOsQACgkQOTWH2X2G UAucHRAAne2Rt/+nxhe9mijiXw6JEUtd2TiR3EY1DT49t0bqqVI2fFo/Z7FaRlaX poCZrQ/ZrJokB45x5dVEuqocOB9m94CVE0H8UG+2Gem9RhjB6KEuOXG9xJxOIf2L FYPlQ5s6KQjEeOgIjzjQlOK9HDiVw0gcOiL39NcJKd+klmUt18GAteFV3132C6Uu HANNAZqIHr18X/XTWdVjfLA7TWuLmOQKz+f1J+AF3RuuZBCsaO8shw+NlSpqCPFO M2Ib1Bd76Nq2xxiZO3D7Y/Nvl5Ual7bIeoBqLzNu4DI1hnZGDT+MkJI8JdYeWJt8 O0QYnxtWA5KNiH0L7wcFK50PcNIWB9M2GBfoX0+0sjInS0kjt2By4MlJHhHh6uU1 uRDGh6DC8Yo6j3vyJ1DTzTE3AbG7PsctqtSNc2kcAFkY1mWNs2IpJjnBFCVXDOe4 H92W/vs4XfT9KHV2OKrWPnOAl/ViRi5laM/imYCZ/ne9Yi4g7oL/dnJQNUhiIJNM hH2Tm2jZXOahydd3g0O0skfi17wDvV8qdJnf2DbQ/lJsSccCH7L0SA0JN0VNYPUf DtGkGcNr4DsJA15Bpf3/rc2/jyB+QfCX7xy+oUw0u6OrjgWzxqR79YH2gGYl0s40 VXBI6WeMjqkTwVAgBjWorDJEJP15za02t/u2Jc4Y2ziBb+Oxu+o= =PK1U -----END PGP SIGNATURE----- Wed Jan 22 20:20:14 UTC 2025 I: Checking whether the package is not for us Wed Jan 22 20:20:14 UTC 2025 I: Starting 1st build on remote node ionos2-i386.debian.net. Wed Jan 22 20:20:14 UTC 2025 I: Preparing to do remote build '1' on ionos2-i386.debian.net. Wed Jan 22 20:20:14 UTC 2025 - checking /var/lib/jenkins/offline_nodes if ionos2-i386.debian.net is marked as down. Wed Jan 22 20:20:14 UTC 2025 - checking via ssh if ionos2-i386.debian.net is up. removed '/tmp/read-only-fs-test-nA6R0Y' ==================================================================================== Wed Jan 22 20:20:15 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos2-i386, called using "1 freezegun trixie /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop 1.5.1-1.2" as arguments. Wed Jan 22 20:20:15 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-i8uMMQWR" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Wed Jan 22 20:20:15 UTC 2025 I: Downloading source for trixie/freezegun=1.5.1-1.2 Reading package lists... NOTICE: 'freezegun' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/python-freezegun.git Please use: git clone https://salsa.debian.org/debian/python-freezegun.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 36.6 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main freezegun 1.5.1-1.2 (dsc) [2166 B] Get:2 http://deb.debian.org/debian trixie/main freezegun 1.5.1-1.2 (tar) [31.2 kB] Get:3 http://deb.debian.org/debian trixie/main freezegun 1.5.1-1.2 (diff) [3256 B] Fetched 36.6 kB in 0s (1523 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'freezegun' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/python-freezegun.git Please use: git clone https://salsa.debian.org/debian/python-freezegun.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 36.6 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main freezegun 1.5.1-1.2 (dsc) [2166 B] Get:2 http://deb.debian.org/debian trixie/main freezegun 1.5.1-1.2 (tar) [31.2 kB] Get:3 http://deb.debian.org/debian trixie/main freezegun 1.5.1-1.2 (diff) [3256 B] Fetched 36.6 kB in 0s (1523 kB/s) Download complete and in download only mode ============================================================================= Building freezegun in trixie on i386 on ionos2-i386 now. Date: Wed Jan 22 21:20:17 CET 2025 Date UTC: Wed Jan 22 20:20:17 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Wed Jan 22 08:20:17 -12 2025 I: pbuilder-time-stamp: 1737577217 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [freezegun_1.5.1-1.2.dsc] I: copying [./freezegun_1.5.1.orig.tar.gz] I: copying [./freezegun_1.5.1-1.2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./freezegun_1.5.1-1.2.dsc: unsupported subcommand dpkg-source: info: extracting freezegun in freezegun-1.5.1 dpkg-source: info: unpacking freezegun_1.5.1.orig.tar.gz dpkg-source: info: unpacking freezegun_1.5.1-1.2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying admin-support-python3.13.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/52125/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='f63ba94a4bc643298cc5cacb22af58ea' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='52125' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop/pbuilderrc_cu0W --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop/b1 --logfile b1/build.log freezegun_1.5.1-1.2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos2-i386 6.1.0-30-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.124-1 (2025-01-12) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/52125/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-python, python3-all, python3-coverage, python3-dateutil, python3-pytest, python3-setuptools dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19842 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-coverage; however: Package python3-coverage is not installed. pbuilder-satisfydepends-dummy depends on python3-dateutil; however: Package python3-dateutil is not installed. pbuilder-satisfydepends-dummy depends on python3-pytest; however: Package python3-pytest is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi8{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libpython3.13-minimal{a} libpython3.13-stdlib{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-all{a} python3-autocommand{a} python3-coverage{a} python3-dateutil{a} python3-inflect{a} python3-iniconfig{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-jaraco.text{a} python3-minimal{a} python3-more-itertools{a} python3-packaging{a} python3-pkg-resources{a} python3-pluggy{a} python3-pytest{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} python3.13{a} python3.13-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx python3-pygments wget 0 packages upgraded, 76 newly installed, 0 to remove and 0 not upgraded. Need to get 35.6 MB of archives. After unpacking 138 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 libpython3.12-minimal i386 3.12.8-5 [816 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libexpat1 i386 2.6.4-1 [107 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 python3.12-minimal i386 3.12.8-5 [2241 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 python3-minimal i386 3.12.8-1 [26.9 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 tzdata all 2024b-6 [257 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 libffi8 i386 3.4.6-1 [21.2 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libkrb5support0 i386 1.21.3-3 [34.9 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 libcom-err2 i386 1.47.2-1 [24.3 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 libk5crypto3 i386 1.21.3-3 [83.6 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 libkeyutils1 i386 1.6.3-4 [9600 B] Get: 13 http://deb.debian.org/debian trixie/main i386 libkrb5-3 i386 1.21.3-3 [350 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 libgssapi-krb5-2 i386 1.21.3-3 [146 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libtirpc3t64 i386 1.3.4+ds-1.3+b1 [90.5 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libnsl2 i386 1.3.0-3+b3 [42.7 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 readline-common all 8.2-6 [69.4 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libreadline8t64 i386 8.2-6 [173 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libpython3.12-stdlib i386 3.12.8-5 [1969 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 python3.12 i386 3.12.8-5 [677 kB] Get: 22 http://deb.debian.org/debian trixie/main i386 libpython3-stdlib i386 3.12.8-1 [9792 B] Get: 23 http://deb.debian.org/debian trixie/main i386 python3 i386 3.12.8-1 [27.9 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libpython3.13-minimal i386 3.13.1-3 [858 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 python3.13-minimal i386 3.13.1-3 [2264 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-4 [201 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-1 [96.1 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 35 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 36 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-5 [301 kB] Get: 37 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 38 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 39 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 40 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-4 [723 kB] Get: 41 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.23 [90.6 kB] Get: 42 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-2 [539 kB] Get: 43 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 46 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 47 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 48 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 49 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-1 [458 kB] Get: 50 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-6 [9582 kB] Get: 51 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 52 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-4 [1632 kB] Get: 53 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 54 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 55 http://deb.debian.org/debian trixie/main i386 debhelper all 13.23 [919 kB] Get: 56 http://deb.debian.org/debian trixie/main i386 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 57 http://deb.debian.org/debian trixie/main i386 python3-more-itertools all 10.6.0-1 [65.3 kB] Get: 58 http://deb.debian.org/debian trixie/main i386 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 59 http://deb.debian.org/debian trixie/main i386 python3-typeguard all 4.4.1-1 [37.0 kB] Get: 60 http://deb.debian.org/debian trixie/main i386 python3-inflect all 7.3.1-2 [32.4 kB] Get: 61 http://deb.debian.org/debian trixie/main i386 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 62 http://deb.debian.org/debian trixie/main i386 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 63 http://deb.debian.org/debian trixie/main i386 python3-pkg-resources all 75.6.0-1 [222 kB] Get: 64 http://deb.debian.org/debian trixie/main i386 python3-jaraco.text all 4.0.0-1 [11.4 kB] Get: 65 http://deb.debian.org/debian trixie/main i386 python3-zipp all 3.21.0-1 [10.6 kB] Get: 66 http://deb.debian.org/debian trixie/main i386 python3-setuptools all 75.6.0-1 [720 kB] Get: 67 http://deb.debian.org/debian trixie/main i386 dh-python all 6.20250108 [113 kB] Get: 68 http://deb.debian.org/debian trixie/main i386 libpython3.13-stdlib i386 3.13.1-3 [1980 kB] Get: 69 http://deb.debian.org/debian trixie/main i386 python3.13 i386 3.13.1-3 [740 kB] Get: 70 http://deb.debian.org/debian trixie/main i386 python3-all i386 3.12.8-1 [1048 B] Get: 71 http://deb.debian.org/debian trixie/main i386 python3-coverage i386 7.6.0+dfsg1-2+b1 [177 kB] Get: 72 http://deb.debian.org/debian trixie/main i386 python3-dateutil all 2.9.0-3 [79.3 kB] Get: 73 http://deb.debian.org/debian trixie/main i386 python3-iniconfig all 1.1.1-2 [6396 B] Get: 74 http://deb.debian.org/debian trixie/main i386 python3-packaging all 24.2-1 [55.3 kB] Get: 75 http://deb.debian.org/debian trixie/main i386 python3-pluggy all 1.5.0-1 [26.9 kB] Get: 76 http://deb.debian.org/debian trixie/main i386 python3-pytest all 8.3.4-1 [250 kB] Fetched 35.6 MB in 1s (56.4 MB/s) Preconfiguring packages ... Selecting previously unselected package libpython3.12-minimal:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19842 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.8-5_i386.deb ... Unpacking libpython3.12-minimal:i386 (3.12.8-5) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.6.4-1_i386.deb ... Unpacking libexpat1:i386 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.8-5_i386.deb ... Unpacking python3.12-minimal (3.12.8-5) ... Setting up libpython3.12-minimal:i386 (3.12.8-5) ... Setting up libexpat1:i386 (2.6.4-1) ... Setting up python3.12-minimal (3.12.8-5) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20162 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.8-1_i386.deb ... Unpacking python3-minimal (3.12.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-6_all.deb ... Unpacking tzdata (2024b-6) ... Selecting previously unselected package libffi8:i386. Preparing to unpack .../04-libffi8_3.4.6-1_i386.deb ... Unpacking libffi8:i386 (3.4.6-1) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../05-libkrb5support0_1.21.3-3_i386.deb ... Unpacking libkrb5support0:i386 (1.21.3-3) ... Selecting previously unselected package libcom-err2:i386. Preparing to unpack .../06-libcom-err2_1.47.2-1_i386.deb ... Unpacking libcom-err2:i386 (1.47.2-1) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../07-libk5crypto3_1.21.3-3_i386.deb ... Unpacking libk5crypto3:i386 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../08-libkeyutils1_1.6.3-4_i386.deb ... Unpacking libkeyutils1:i386 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../09-libkrb5-3_1.21.3-3_i386.deb ... Unpacking libkrb5-3:i386 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../10-libgssapi-krb5-2_1.21.3-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../11-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:i386. Preparing to unpack .../12-libtirpc3t64_1.3.4+ds-1.3+b1_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3 to /lib/i386-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3.0.0 to /lib/i386-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:i386. Preparing to unpack .../13-libnsl2_1.3.0-3+b3_i386.deb ... Unpacking libnsl2:i386 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../14-readline-common_8.2-6_all.deb ... Unpacking readline-common (8.2-6) ... Selecting previously unselected package libreadline8t64:i386. Preparing to unpack .../15-libreadline8t64_8.2-6_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8 to /lib/i386-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8.2 to /lib/i386-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8 to /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8.2 to /lib/i386-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:i386 (8.2-6) ... Selecting previously unselected package libpython3.12-stdlib:i386. Preparing to unpack .../16-libpython3.12-stdlib_3.12.8-5_i386.deb ... Unpacking libpython3.12-stdlib:i386 (3.12.8-5) ... Selecting previously unselected package python3.12. Preparing to unpack .../17-python3.12_3.12.8-5_i386.deb ... Unpacking python3.12 (3.12.8-5) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../18-libpython3-stdlib_3.12.8-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.12.8-1) ... Setting up python3-minimal (3.12.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21230 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.8-1_i386.deb ... Unpacking python3 (3.12.8-1) ... Selecting previously unselected package libpython3.13-minimal:i386. Preparing to unpack .../01-libpython3.13-minimal_3.13.1-3_i386.deb ... Unpacking libpython3.13-minimal:i386 (3.13.1-3) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../02-python3.13-minimal_3.13.1-3_i386.deb ... Unpacking python3.13-minimal (3.13.1-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-4_i386.deb ... Unpacking gettext-base (0.22.5-4) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.4-1_i386.deb ... Unpacking bsdextrautils (2.40.4-1) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../11-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-5_i386.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-4_all.deb ... Unpacking autopoint (0.22.5-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.5.4-2_all.deb ... Unpacking libtool (2.5.4-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../24-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../26-libunistring5_1.3-1_i386.deb ... Unpacking libunistring5:i386 (1.3-1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../27-libicu72_72.1-6_i386.deb ... Unpacking libicu72:i386 (72.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.22.5-4_i386.deb ... Unpacking gettext (0.22.5-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../33-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../34-python3-more-itertools_10.6.0-1_all.deb ... Unpacking python3-more-itertools (10.6.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../35-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../36-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../37-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../38-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../39-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../40-python3-pkg-resources_75.6.0-1_all.deb ... Unpacking python3-pkg-resources (75.6.0-1) ... Selecting previously unselected package python3-jaraco.text. Preparing to unpack .../41-python3-jaraco.text_4.0.0-1_all.deb ... Unpacking python3-jaraco.text (4.0.0-1) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../42-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../43-python3-setuptools_75.6.0-1_all.deb ... Unpacking python3-setuptools (75.6.0-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../44-dh-python_6.20250108_all.deb ... Unpacking dh-python (6.20250108) ... Selecting previously unselected package libpython3.13-stdlib:i386. Preparing to unpack .../45-libpython3.13-stdlib_3.13.1-3_i386.deb ... Unpacking libpython3.13-stdlib:i386 (3.13.1-3) ... Selecting previously unselected package python3.13. Preparing to unpack .../46-python3.13_3.13.1-3_i386.deb ... Unpacking python3.13 (3.13.1-3) ... Selecting previously unselected package python3-all. Preparing to unpack .../47-python3-all_3.12.8-1_i386.deb ... Unpacking python3-all (3.12.8-1) ... Selecting previously unselected package python3-coverage. Preparing to unpack .../48-python3-coverage_7.6.0+dfsg1-2+b1_i386.deb ... Unpacking python3-coverage (7.6.0+dfsg1-2+b1) ... Selecting previously unselected package python3-dateutil. Preparing to unpack .../49-python3-dateutil_2.9.0-3_all.deb ... Unpacking python3-dateutil (2.9.0-3) ... Selecting previously unselected package python3-iniconfig. Preparing to unpack .../50-python3-iniconfig_1.1.1-2_all.deb ... Unpacking python3-iniconfig (1.1.1-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../51-python3-packaging_24.2-1_all.deb ... Unpacking python3-packaging (24.2-1) ... Selecting previously unselected package python3-pluggy. Preparing to unpack .../52-python3-pluggy_1.5.0-1_all.deb ... Unpacking python3-pluggy (1.5.0-1) ... Selecting previously unselected package python3-pytest. Preparing to unpack .../53-python3-pytest_8.3.4-1_all.deb ... Unpacking python3-pytest (8.3.4-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libkeyutils1:i386 (1.6.3-4) ... Setting up libicu72:i386 (72.1-6) ... Setting up bsdextrautils (2.40.4-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-4) ... Setting up m4 (1.4.19-5) ... Setting up libcom-err2:i386 (1.47.2-1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libkrb5support0:i386 (1.21.3-3) ... Setting up tzdata (2024b-6) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Jan 22 20:20:48 UTC 2025. Universal Time is now: Wed Jan 22 20:20:48 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libpython3.13-minimal:i386 (3.13.1-3) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:i386 (1.3-1) ... Setting up autopoint (0.22.5-4) ... Setting up libk5crypto3:i386 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libffi8:i386 (3.4.6-1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up python3.13-minimal (3.13.1-3) ... Setting up netbase (6.4) ... Setting up libkrb5-3:i386 (1.21.3-3) ... Setting up readline-common (8.2-6) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-4) ... Setting up libtool (2.5.4-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:i386 (1.21.3-3) ... Setting up libreadline8t64:i386 (8.2-6) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-7) ... Setting up libpython3.13-stdlib:i386 (3.13.1-3) ... Setting up libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Setting up python3.13 (3.13.1-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:i386 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:i386 (3.12.8-5) ... Setting up python3.12 (3.12.8-5) ... Setting up debhelper (13.23) ... Setting up libpython3-stdlib:i386 (3.12.8-1) ... Setting up python3 (3.12.8-1) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-packaging (24.2-1) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-pluggy (1.5.0-1) ... Setting up python3-dateutil (2.9.0-3) ... Setting up python3-more-itertools (10.6.0-1) ... Setting up python3-iniconfig (1.1.1-2) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-pytest (8.3.4-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-all (3.12.8-1) ... Setting up python3-coverage (7.6.0+dfsg1-2+b1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-jaraco.text (4.0.0-1) ... Setting up python3-pkg-resources (75.6.0-1) ... Setting up python3-setuptools (75.6.0-1) ... Setting up dh-python (6.20250108) ... Processing triggers for libc-bin (2.40-5) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/freezegun-1.5.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../freezegun_1.5.1-1.2_source.changes dpkg-buildpackage: info: source package freezegun dpkg-buildpackage: info: source version 1.5.1-1.2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Colin Watson dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild pybuild --clean -i python{version} -p "3.13 3.12" I: pybuild base:311: python3.13 setup.py clean running clean removing '/build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build' (and everything under it) 'build/bdist.linux-i686' does not exist -- can't clean it 'build/scripts-3.13' does not exist -- can't clean it I: pybuild base:311: python3.12 setup.py clean running clean removing '/build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build' (and everything under it) 'build/bdist.linux-i686' does not exist -- can't clean it 'build/scripts-3.12' does not exist -- can't clean it rm -rf .pybuild/ find . -name \*.pyc -exec rm {} \; dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ rm -f -- debian/python3-freezegun.substvars debian/files rm -fr -- debian/python3-freezegun/ debian/tmp/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a \( -name autom4te.cache -o -name __pycache__ \) -prune -exec rm -rf {} + \) \) debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild pybuild --configure -i python{version} -p "3.13 3.12" I: pybuild base:311: python3.13 setup.py config running config I: pybuild base:311: python3.12 setup.py config running config dh_auto_build -O--buildsystem=pybuild pybuild --build -i python{version} -p "3.13 3.12" I: pybuild base:311: /usr/bin/python3.13 setup.py build running build running build_py creating /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/api.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/config.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/_async.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/__init__.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun running egg_info creating freezegun.egg-info writing freezegun.egg-info/PKG-INFO writing dependency_links to freezegun.egg-info/dependency_links.txt writing requirements to freezegun.egg-info/requires.txt writing top-level names to freezegun.egg-info/top_level.txt writing manifest file 'freezegun.egg-info/SOURCES.txt' reading manifest file 'freezegun.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching '*.pyi' under directory 'freezegun' warning: no previously-included files matching '__pycache__' found anywhere in distribution warning: no previously-included files matching '*.py[co]' found anywhere in distribution adding license file 'LICENSE' adding license file 'AUTHORS.rst' writing manifest file 'freezegun.egg-info/SOURCES.txt' copying freezegun/py.typed -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun I: pybuild base:311: /usr/bin/python3 setup.py build running build running build_py creating /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/api.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/config.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/_async.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/__init__.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun running egg_info writing freezegun.egg-info/PKG-INFO writing dependency_links to freezegun.egg-info/dependency_links.txt writing requirements to freezegun.egg-info/requires.txt writing top-level names to freezegun.egg-info/top_level.txt reading manifest file 'freezegun.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching '*.pyi' under directory 'freezegun' warning: no previously-included files matching '__pycache__' found anywhere in distribution warning: no previously-included files matching '*.py[co]' found anywhere in distribution adding license file 'LICENSE' adding license file 'AUTHORS.rst' writing manifest file 'freezegun.egg-info/SOURCES.txt' copying freezegun/py.typed -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun dh_auto_test -O--buildsystem=pybuild pybuild --test --test-pytest -i python{version} -p "3.13 3.12" I: pybuild base:311: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build; python3.13 -m pytest tests ============================= test session starts ============================== platform linux -- Python 3.13.1, pytest-8.3.4, pluggy-1.5.0 rootdir: /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build configfile: pyproject.toml plugins: typeguard-4.4.1 collected 137 items tests/test_asyncio.py ..... [ 3%] tests/test_class_import.py .............. [ 13%] tests/test_configure.py ..... [ 17%] tests/test_datetimes.py .................s...........s.................. [ 52%] FFF....................s [ 70%] tests/test_errors.py .. [ 71%] tests/test_import_alias.py ... [ 73%] tests/test_operations.py ............. [ 83%] tests/test_pickle.py ... [ 85%] tests/test_sqlite3.py .. [ 86%] tests/test_ticking.py .s.......... [ 95%] tests/test_utils.py .. [ 97%] tests/test_uuid.py .. [ 98%] tests/test_warnings.py .. [100%] =================================== FAILURES =================================== _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time _ self = frozen_time = @freeze_time('2013-04-09', as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:537: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func _ self = frozen_time = @freeze_time(lambda: datetime.date(year=2013, month=4, day=9), as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:547: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_hello _ self = kwargs = {'hello': } @py_assert1 = @py_assert3 = 'hello' @py_assert5 = @py_assert7 = datetime.datetime(2013, 4, 9, 0, 0) @py_assert9 = @py_assert11 = datetime.datetime(2013, 4, 8, 12, 0) @py_assert13 = @freeze_time('2013-04-09', as_kwarg='hello') def test_method_decorator_works_on_unittest_kwarg_hello(self, **kwargs: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert kwargs.get("hello").time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" # type: ignore E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:542: AssertionError =============================== warnings summary =============================== tests/test_datetimes.py::test_simple_api /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_datetimes.py:75: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). assert datetime.datetime.utcnow() != datetime.datetime(2012, 1, 14) tests/test_datetimes.py::test_compare_datetime_and_time_with_timezone /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_datetimes.py:795: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert now == datetime.datetime.utcfromtimestamp(time.time()) tests/test_datetimes.py::test_timestamp_with_tzoffset /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_datetimes.py:812: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert utcnow == datetime.datetime.utcfromtimestamp(time.time()) tests/test_pickle.py::test_pickle /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_pickle.py:13: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). utc_now = datetime.datetime.utcnow() -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html =========================== short test summary info ============================ FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_hello ============= 3 failed, 130 passed, 4 skipped, 4 warnings in 2.01s ============= E: pybuild pybuild:389: test: plugin distutils failed with: exit code=1: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build; python3.13 -m pytest tests I: pybuild base:311: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build; python3.12 -m pytest tests ============================= test session starts ============================== platform linux -- Python 3.12.8, pytest-8.3.4, pluggy-1.5.0 rootdir: /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build configfile: pyproject.toml plugins: typeguard-4.4.1 collected 137 items tests/test_asyncio.py ..... [ 3%] tests/test_class_import.py .............. [ 13%] tests/test_configure.py ..... [ 17%] tests/test_datetimes.py .................s...........s.................. [ 52%] FFF....................s [ 70%] tests/test_errors.py .. [ 71%] tests/test_import_alias.py ... [ 73%] tests/test_operations.py ............. [ 83%] tests/test_pickle.py ... [ 85%] tests/test_sqlite3.py .. [ 86%] tests/test_ticking.py .s.......... [ 95%] tests/test_utils.py .. [ 97%] tests/test_uuid.py .. [ 98%] tests/test_warnings.py .. [100%] =================================== FAILURES =================================== _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time _ self = frozen_time = @freeze_time('2013-04-09', as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:537: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func _ self = frozen_time = @freeze_time(lambda: datetime.date(year=2013, month=4, day=9), as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:547: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_hello _ self = kwargs = {'hello': } @py_assert1 = @py_assert3 = 'hello' @py_assert5 = @py_assert7 = datetime.datetime(2013, 4, 9, 0, 0) @py_assert9 = @py_assert11 = datetime.datetime(2013, 4, 8, 12, 0) @py_assert13 = @freeze_time('2013-04-09', as_kwarg='hello') def test_method_decorator_works_on_unittest_kwarg_hello(self, **kwargs: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert kwargs.get("hello").time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" # type: ignore E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:542: AssertionError =============================== warnings summary =============================== tests/test_datetimes.py::test_simple_api /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_datetimes.py:75: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). assert datetime.datetime.utcnow() != datetime.datetime(2012, 1, 14) tests/test_datetimes.py::test_compare_datetime_and_time_with_timezone /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_datetimes.py:795: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert now == datetime.datetime.utcfromtimestamp(time.time()) tests/test_datetimes.py::test_timestamp_with_tzoffset /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_datetimes.py:812: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert utcnow == datetime.datetime.utcfromtimestamp(time.time()) tests/test_pickle.py::test_pickle /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_pickle.py:13: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). utc_now = datetime.datetime.utcnow() -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html =========================== short test summary info ============================ FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_hello ============= 3 failed, 130 passed, 4 skipped, 4 warnings in 2.58s ============= E: pybuild pybuild:389: test: plugin distutils failed with: exit code=1: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build; python3.12 -m pytest tests rm -fr -- /tmp/dh-xdg-rundir-qtF9li84 dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.13 3.12" returned exit code 13 make: *** [debian/rules:8: binary] Error 25 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/52125 and its subdirectories Starting cleanup. All cleanup done. Wed Jan 22 20:21:21 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-i8uMMQWR, removing. /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Jan 22 20:21 b1 drwxr-xr-x 2 jenkins jenkins 4096 Jan 22 20:20 b2 -rw-r--r-- 1 jenkins jenkins 2166 Jan 20 12:15 freezegun_1.5.1-1.2.dsc -rw------- 1 jenkins jenkins 3281 Jan 22 20:20 rbuildlog.QUYNJMH /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop/b1: total 56 -rw-r--r-- 1 jenkins jenkins 54144 Jan 22 20:21 build.log /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop/b2: total 0 Wed Jan 22 20:21:22 UTC 2025 I: Deleting $TMPDIR on ionos2-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jan 22 08:20:17 -12 2025 I: pbuilder-time-stamp: 1737577217 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [freezegun_1.5.1-1.2.dsc] I: copying [./freezegun_1.5.1.orig.tar.gz] I: copying [./freezegun_1.5.1-1.2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./freezegun_1.5.1-1.2.dsc: unsupported subcommand dpkg-source: info: extracting freezegun in freezegun-1.5.1 dpkg-source: info: unpacking freezegun_1.5.1.orig.tar.gz dpkg-source: info: unpacking freezegun_1.5.1-1.2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying admin-support-python3.13.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/52125/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=11 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='f63ba94a4bc643298cc5cacb22af58ea' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='52125' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop/pbuilderrc_cu0W --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Qwdqzfop/b1 --logfile b1/build.log freezegun_1.5.1-1.2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://46.16.76.132:3128' I: uname -a Linux ionos2-i386 6.1.0-30-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.124-1 (2025-01-12) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/52125/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-python, python3-all, python3-coverage, python3-dateutil, python3-pytest, python3-setuptools dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19842 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-coverage; however: Package python3-coverage is not installed. pbuilder-satisfydepends-dummy depends on python3-dateutil; however: Package python3-dateutil is not installed. pbuilder-satisfydepends-dummy depends on python3-pytest; however: Package python3-pytest is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi8{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libpython3.13-minimal{a} libpython3.13-stdlib{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-all{a} python3-autocommand{a} python3-coverage{a} python3-dateutil{a} python3-inflect{a} python3-iniconfig{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-jaraco.text{a} python3-minimal{a} python3-more-itertools{a} python3-packaging{a} python3-pkg-resources{a} python3-pluggy{a} python3-pytest{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} python3.13{a} python3.13-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx python3-pygments wget 0 packages upgraded, 76 newly installed, 0 to remove and 0 not upgraded. Need to get 35.6 MB of archives. After unpacking 138 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 libpython3.12-minimal i386 3.12.8-5 [816 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libexpat1 i386 2.6.4-1 [107 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 python3.12-minimal i386 3.12.8-5 [2241 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 python3-minimal i386 3.12.8-1 [26.9 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 tzdata all 2024b-6 [257 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 libffi8 i386 3.4.6-1 [21.2 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libkrb5support0 i386 1.21.3-3 [34.9 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 libcom-err2 i386 1.47.2-1 [24.3 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 libk5crypto3 i386 1.21.3-3 [83.6 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 libkeyutils1 i386 1.6.3-4 [9600 B] Get: 13 http://deb.debian.org/debian trixie/main i386 libkrb5-3 i386 1.21.3-3 [350 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 libgssapi-krb5-2 i386 1.21.3-3 [146 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libtirpc3t64 i386 1.3.4+ds-1.3+b1 [90.5 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libnsl2 i386 1.3.0-3+b3 [42.7 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 readline-common all 8.2-6 [69.4 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libreadline8t64 i386 8.2-6 [173 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libpython3.12-stdlib i386 3.12.8-5 [1969 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 python3.12 i386 3.12.8-5 [677 kB] Get: 22 http://deb.debian.org/debian trixie/main i386 libpython3-stdlib i386 3.12.8-1 [9792 B] Get: 23 http://deb.debian.org/debian trixie/main i386 python3 i386 3.12.8-1 [27.9 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libpython3.13-minimal i386 3.13.1-3 [858 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 python3.13-minimal i386 3.13.1-3 [2264 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-4 [201 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-7 [1199 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.4-1 [96.1 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 35 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 36 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-5 [301 kB] Get: 37 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 38 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 39 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 40 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-4 [723 kB] Get: 41 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.23 [90.6 kB] Get: 42 http://deb.debian.org/debian trixie/main i386 libtool all 2.5.4-2 [539 kB] Get: 43 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 44 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 45 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 46 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 47 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 48 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 49 http://deb.debian.org/debian trixie/main i386 libunistring5 i386 1.3-1 [458 kB] Get: 50 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-6 [9582 kB] Get: 51 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 52 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-4 [1632 kB] Get: 53 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 54 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 55 http://deb.debian.org/debian trixie/main i386 debhelper all 13.23 [919 kB] Get: 56 http://deb.debian.org/debian trixie/main i386 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 57 http://deb.debian.org/debian trixie/main i386 python3-more-itertools all 10.6.0-1 [65.3 kB] Get: 58 http://deb.debian.org/debian trixie/main i386 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 59 http://deb.debian.org/debian trixie/main i386 python3-typeguard all 4.4.1-1 [37.0 kB] Get: 60 http://deb.debian.org/debian trixie/main i386 python3-inflect all 7.3.1-2 [32.4 kB] Get: 61 http://deb.debian.org/debian trixie/main i386 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 62 http://deb.debian.org/debian trixie/main i386 python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 63 http://deb.debian.org/debian trixie/main i386 python3-pkg-resources all 75.6.0-1 [222 kB] Get: 64 http://deb.debian.org/debian trixie/main i386 python3-jaraco.text all 4.0.0-1 [11.4 kB] Get: 65 http://deb.debian.org/debian trixie/main i386 python3-zipp all 3.21.0-1 [10.6 kB] Get: 66 http://deb.debian.org/debian trixie/main i386 python3-setuptools all 75.6.0-1 [720 kB] Get: 67 http://deb.debian.org/debian trixie/main i386 dh-python all 6.20250108 [113 kB] Get: 68 http://deb.debian.org/debian trixie/main i386 libpython3.13-stdlib i386 3.13.1-3 [1980 kB] Get: 69 http://deb.debian.org/debian trixie/main i386 python3.13 i386 3.13.1-3 [740 kB] Get: 70 http://deb.debian.org/debian trixie/main i386 python3-all i386 3.12.8-1 [1048 B] Get: 71 http://deb.debian.org/debian trixie/main i386 python3-coverage i386 7.6.0+dfsg1-2+b1 [177 kB] Get: 72 http://deb.debian.org/debian trixie/main i386 python3-dateutil all 2.9.0-3 [79.3 kB] Get: 73 http://deb.debian.org/debian trixie/main i386 python3-iniconfig all 1.1.1-2 [6396 B] Get: 74 http://deb.debian.org/debian trixie/main i386 python3-packaging all 24.2-1 [55.3 kB] Get: 75 http://deb.debian.org/debian trixie/main i386 python3-pluggy all 1.5.0-1 [26.9 kB] Get: 76 http://deb.debian.org/debian trixie/main i386 python3-pytest all 8.3.4-1 [250 kB] Fetched 35.6 MB in 1s (56.4 MB/s) Preconfiguring packages ... Selecting previously unselected package libpython3.12-minimal:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19842 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.8-5_i386.deb ... Unpacking libpython3.12-minimal:i386 (3.12.8-5) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.6.4-1_i386.deb ... Unpacking libexpat1:i386 (2.6.4-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.8-5_i386.deb ... Unpacking python3.12-minimal (3.12.8-5) ... Setting up libpython3.12-minimal:i386 (3.12.8-5) ... Setting up libexpat1:i386 (2.6.4-1) ... Setting up python3.12-minimal (3.12.8-5) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20162 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.8-1_i386.deb ... Unpacking python3-minimal (3.12.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024b-6_all.deb ... Unpacking tzdata (2024b-6) ... Selecting previously unselected package libffi8:i386. Preparing to unpack .../04-libffi8_3.4.6-1_i386.deb ... Unpacking libffi8:i386 (3.4.6-1) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../05-libkrb5support0_1.21.3-3_i386.deb ... Unpacking libkrb5support0:i386 (1.21.3-3) ... Selecting previously unselected package libcom-err2:i386. Preparing to unpack .../06-libcom-err2_1.47.2-1_i386.deb ... Unpacking libcom-err2:i386 (1.47.2-1) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../07-libk5crypto3_1.21.3-3_i386.deb ... Unpacking libk5crypto3:i386 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../08-libkeyutils1_1.6.3-4_i386.deb ... Unpacking libkeyutils1:i386 (1.6.3-4) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../09-libkrb5-3_1.21.3-3_i386.deb ... Unpacking libkrb5-3:i386 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../10-libgssapi-krb5-2_1.21.3-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../11-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:i386. Preparing to unpack .../12-libtirpc3t64_1.3.4+ds-1.3+b1_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3 to /lib/i386-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3.0.0 to /lib/i386-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:i386. Preparing to unpack .../13-libnsl2_1.3.0-3+b3_i386.deb ... Unpacking libnsl2:i386 (1.3.0-3+b3) ... Selecting previously unselected package readline-common. Preparing to unpack .../14-readline-common_8.2-6_all.deb ... Unpacking readline-common (8.2-6) ... Selecting previously unselected package libreadline8t64:i386. Preparing to unpack .../15-libreadline8t64_8.2-6_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8 to /lib/i386-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8.2 to /lib/i386-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8 to /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8.2 to /lib/i386-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:i386 (8.2-6) ... Selecting previously unselected package libpython3.12-stdlib:i386. Preparing to unpack .../16-libpython3.12-stdlib_3.12.8-5_i386.deb ... Unpacking libpython3.12-stdlib:i386 (3.12.8-5) ... Selecting previously unselected package python3.12. Preparing to unpack .../17-python3.12_3.12.8-5_i386.deb ... Unpacking python3.12 (3.12.8-5) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../18-libpython3-stdlib_3.12.8-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.12.8-1) ... Setting up python3-minimal (3.12.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21230 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.8-1_i386.deb ... Unpacking python3 (3.12.8-1) ... Selecting previously unselected package libpython3.13-minimal:i386. Preparing to unpack .../01-libpython3.13-minimal_3.13.1-3_i386.deb ... Unpacking libpython3.13-minimal:i386 (3.13.1-3) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../02-python3.13-minimal_3.13.1-3_i386.deb ... Unpacking python3.13-minimal (3.13.1-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.22.5-4_i386.deb ... Unpacking gettext-base (0.22.5-4) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-7_i386.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.4-1_i386.deb ... Unpacking bsdextrautils (2.40.4-1) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../11-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-5_i386.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.22.5-4_all.deb ... Unpacking autopoint (0.22.5-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.5.4-2_all.deb ... Unpacking libtool (2.5.4-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../24-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:i386. Preparing to unpack .../26-libunistring5_1.3-1_i386.deb ... Unpacking libunistring5:i386 (1.3-1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../27-libicu72_72.1-6_i386.deb ... Unpacking libicu72:i386 (72.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.22.5-4_i386.deb ... Unpacking gettext (0.22.5-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../33-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../34-python3-more-itertools_10.6.0-1_all.deb ... Unpacking python3-more-itertools (10.6.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../35-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../36-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../37-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../38-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../39-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../40-python3-pkg-resources_75.6.0-1_all.deb ... Unpacking python3-pkg-resources (75.6.0-1) ... Selecting previously unselected package python3-jaraco.text. Preparing to unpack .../41-python3-jaraco.text_4.0.0-1_all.deb ... Unpacking python3-jaraco.text (4.0.0-1) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../42-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../43-python3-setuptools_75.6.0-1_all.deb ... Unpacking python3-setuptools (75.6.0-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../44-dh-python_6.20250108_all.deb ... Unpacking dh-python (6.20250108) ... Selecting previously unselected package libpython3.13-stdlib:i386. Preparing to unpack .../45-libpython3.13-stdlib_3.13.1-3_i386.deb ... Unpacking libpython3.13-stdlib:i386 (3.13.1-3) ... Selecting previously unselected package python3.13. Preparing to unpack .../46-python3.13_3.13.1-3_i386.deb ... Unpacking python3.13 (3.13.1-3) ... Selecting previously unselected package python3-all. Preparing to unpack .../47-python3-all_3.12.8-1_i386.deb ... Unpacking python3-all (3.12.8-1) ... Selecting previously unselected package python3-coverage. Preparing to unpack .../48-python3-coverage_7.6.0+dfsg1-2+b1_i386.deb ... Unpacking python3-coverage (7.6.0+dfsg1-2+b1) ... Selecting previously unselected package python3-dateutil. Preparing to unpack .../49-python3-dateutil_2.9.0-3_all.deb ... Unpacking python3-dateutil (2.9.0-3) ... Selecting previously unselected package python3-iniconfig. Preparing to unpack .../50-python3-iniconfig_1.1.1-2_all.deb ... Unpacking python3-iniconfig (1.1.1-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../51-python3-packaging_24.2-1_all.deb ... Unpacking python3-packaging (24.2-1) ... Selecting previously unselected package python3-pluggy. Preparing to unpack .../52-python3-pluggy_1.5.0-1_all.deb ... Unpacking python3-pluggy (1.5.0-1) ... Selecting previously unselected package python3-pytest. Preparing to unpack .../53-python3-pytest_8.3.4-1_all.deb ... Unpacking python3-pytest (8.3.4-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libkeyutils1:i386 (1.6.3-4) ... Setting up libicu72:i386 (72.1-6) ... Setting up bsdextrautils (2.40.4-1) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-4) ... Setting up m4 (1.4.19-5) ... Setting up libcom-err2:i386 (1.47.2-1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up libkrb5support0:i386 (1.21.3-3) ... Setting up tzdata (2024b-6) ... Current default time zone: 'Etc/UTC' Local time is now: Wed Jan 22 20:20:48 UTC 2025. Universal Time is now: Wed Jan 22 20:20:48 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libpython3.13-minimal:i386 (3.13.1-3) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:i386 (1.3-1) ... Setting up autopoint (0.22.5-4) ... Setting up libk5crypto3:i386 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libffi8:i386 (3.4.6-1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up python3.13-minimal (3.13.1-3) ... Setting up netbase (6.4) ... Setting up libkrb5-3:i386 (1.21.3-3) ... Setting up readline-common (8.2-6) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-4) ... Setting up libtool (2.5.4-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:i386 (1.21.3-3) ... Setting up libreadline8t64:i386 (8.2-6) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-7) ... Setting up libpython3.13-stdlib:i386 (3.13.1-3) ... Setting up libtirpc3t64:i386 (1.3.4+ds-1.3+b1) ... Setting up python3.13 (3.13.1-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:i386 (1.3.0-3+b3) ... Setting up libpython3.12-stdlib:i386 (3.12.8-5) ... Setting up python3.12 (3.12.8-5) ... Setting up debhelper (13.23) ... Setting up libpython3-stdlib:i386 (3.12.8-1) ... Setting up python3 (3.12.8-1) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-packaging (24.2-1) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-pluggy (1.5.0-1) ... Setting up python3-dateutil (2.9.0-3) ... Setting up python3-more-itertools (10.6.0-1) ... Setting up python3-iniconfig (1.1.1-2) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-pytest (8.3.4-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-all (3.12.8-1) ... Setting up python3-coverage (7.6.0+dfsg1-2+b1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-jaraco.text (4.0.0-1) ... Setting up python3-pkg-resources (75.6.0-1) ... Setting up python3-setuptools (75.6.0-1) ... Setting up dh-python (6.20250108) ... Processing triggers for libc-bin (2.40-5) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/freezegun-1.5.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../freezegun_1.5.1-1.2_source.changes dpkg-buildpackage: info: source package freezegun dpkg-buildpackage: info: source version 1.5.1-1.2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Colin Watson dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild pybuild --clean -i python{version} -p "3.13 3.12" I: pybuild base:311: python3.13 setup.py clean running clean removing '/build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build' (and everything under it) 'build/bdist.linux-i686' does not exist -- can't clean it 'build/scripts-3.13' does not exist -- can't clean it I: pybuild base:311: python3.12 setup.py clean running clean removing '/build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build' (and everything under it) 'build/bdist.linux-i686' does not exist -- can't clean it 'build/scripts-3.12' does not exist -- can't clean it rm -rf .pybuild/ find . -name \*.pyc -exec rm {} \; dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ rm -f -- debian/python3-freezegun.substvars debian/files rm -fr -- debian/python3-freezegun/ debian/tmp/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a \( -name autom4te.cache -o -name __pycache__ \) -prune -exec rm -rf {} + \) \) debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild pybuild --configure -i python{version} -p "3.13 3.12" I: pybuild base:311: python3.13 setup.py config running config I: pybuild base:311: python3.12 setup.py config running config dh_auto_build -O--buildsystem=pybuild pybuild --build -i python{version} -p "3.13 3.12" I: pybuild base:311: /usr/bin/python3.13 setup.py build running build running build_py creating /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/api.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/config.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/_async.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun copying freezegun/__init__.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun running egg_info creating freezegun.egg-info writing freezegun.egg-info/PKG-INFO writing dependency_links to freezegun.egg-info/dependency_links.txt writing requirements to freezegun.egg-info/requires.txt writing top-level names to freezegun.egg-info/top_level.txt writing manifest file 'freezegun.egg-info/SOURCES.txt' reading manifest file 'freezegun.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching '*.pyi' under directory 'freezegun' warning: no previously-included files matching '__pycache__' found anywhere in distribution warning: no previously-included files matching '*.py[co]' found anywhere in distribution adding license file 'LICENSE' adding license file 'AUTHORS.rst' writing manifest file 'freezegun.egg-info/SOURCES.txt' copying freezegun/py.typed -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/freezegun I: pybuild base:311: /usr/bin/python3 setup.py build running build running build_py creating /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/api.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/config.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/_async.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun copying freezegun/__init__.py -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun running egg_info writing freezegun.egg-info/PKG-INFO writing dependency_links to freezegun.egg-info/dependency_links.txt writing requirements to freezegun.egg-info/requires.txt writing top-level names to freezegun.egg-info/top_level.txt reading manifest file 'freezegun.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching '*.pyi' under directory 'freezegun' warning: no previously-included files matching '__pycache__' found anywhere in distribution warning: no previously-included files matching '*.py[co]' found anywhere in distribution adding license file 'LICENSE' adding license file 'AUTHORS.rst' writing manifest file 'freezegun.egg-info/SOURCES.txt' copying freezegun/py.typed -> /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/freezegun dh_auto_test -O--buildsystem=pybuild pybuild --test --test-pytest -i python{version} -p "3.13 3.12" I: pybuild base:311: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build; python3.13 -m pytest tests ============================= test session starts ============================== platform linux -- Python 3.13.1, pytest-8.3.4, pluggy-1.5.0 rootdir: /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build configfile: pyproject.toml plugins: typeguard-4.4.1 collected 137 items tests/test_asyncio.py ..... [ 3%] tests/test_class_import.py .............. [ 13%] tests/test_configure.py ..... [ 17%] tests/test_datetimes.py .................s...........s.................. [ 52%] FFF....................s [ 70%] tests/test_errors.py .. [ 71%] tests/test_import_alias.py ... [ 73%] tests/test_operations.py ............. [ 83%] tests/test_pickle.py ... [ 85%] tests/test_sqlite3.py .. [ 86%] tests/test_ticking.py .s.......... [ 95%] tests/test_utils.py .. [ 97%] tests/test_uuid.py .. [ 98%] tests/test_warnings.py .. [100%] =================================== FAILURES =================================== _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time _ self = frozen_time = @freeze_time('2013-04-09', as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:537: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func _ self = frozen_time = @freeze_time(lambda: datetime.date(year=2013, month=4, day=9), as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:547: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_hello _ self = kwargs = {'hello': } @py_assert1 = @py_assert3 = 'hello' @py_assert5 = @py_assert7 = datetime.datetime(2013, 4, 9, 0, 0) @py_assert9 = @py_assert11 = datetime.datetime(2013, 4, 8, 12, 0) @py_assert13 = @freeze_time('2013-04-09', as_kwarg='hello') def test_method_decorator_works_on_unittest_kwarg_hello(self, **kwargs: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert kwargs.get("hello").time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" # type: ignore E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:542: AssertionError =============================== warnings summary =============================== tests/test_datetimes.py::test_simple_api /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_datetimes.py:75: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). assert datetime.datetime.utcnow() != datetime.datetime(2012, 1, 14) tests/test_datetimes.py::test_compare_datetime_and_time_with_timezone /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_datetimes.py:795: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert now == datetime.datetime.utcfromtimestamp(time.time()) tests/test_datetimes.py::test_timestamp_with_tzoffset /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_datetimes.py:812: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert utcnow == datetime.datetime.utcfromtimestamp(time.time()) tests/test_pickle.py::test_pickle /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build/tests/test_pickle.py:13: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). utc_now = datetime.datetime.utcnow() -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html =========================== short test summary info ============================ FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_hello ============= 3 failed, 130 passed, 4 skipped, 4 warnings in 2.01s ============= E: pybuild pybuild:389: test: plugin distutils failed with: exit code=1: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.13_freezegun/build; python3.13 -m pytest tests I: pybuild base:311: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build; python3.12 -m pytest tests ============================= test session starts ============================== platform linux -- Python 3.12.8, pytest-8.3.4, pluggy-1.5.0 rootdir: /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build configfile: pyproject.toml plugins: typeguard-4.4.1 collected 137 items tests/test_asyncio.py ..... [ 3%] tests/test_class_import.py .............. [ 13%] tests/test_configure.py ..... [ 17%] tests/test_datetimes.py .................s...........s.................. [ 52%] FFF....................s [ 70%] tests/test_errors.py .. [ 71%] tests/test_import_alias.py ... [ 73%] tests/test_operations.py ............. [ 83%] tests/test_pickle.py ... [ 85%] tests/test_sqlite3.py .. [ 86%] tests/test_ticking.py .s.......... [ 95%] tests/test_utils.py .. [ 97%] tests/test_uuid.py .. [ 98%] tests/test_warnings.py .. [100%] =================================== FAILURES =================================== _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time _ self = frozen_time = @freeze_time('2013-04-09', as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:537: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func _ self = frozen_time = @freeze_time(lambda: datetime.date(year=2013, month=4, day=9), as_kwarg='frozen_time') def test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func(self, frozen_time: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert frozen_time.time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:547: AssertionError _ TestUnitTestMethodDecorator.test_method_decorator_works_on_unittest_kwarg_hello _ self = kwargs = {'hello': } @py_assert1 = @py_assert3 = 'hello' @py_assert5 = @py_assert7 = datetime.datetime(2013, 4, 9, 0, 0) @py_assert9 = @py_assert11 = datetime.datetime(2013, 4, 8, 12, 0) @py_assert13 = @freeze_time('2013-04-09', as_kwarg='hello') def test_method_decorator_works_on_unittest_kwarg_hello(self, **kwargs: Any) -> None: self.assertEqual(datetime.date(2013, 4, 9), datetime.date.today()) > assert kwargs.get("hello").time_to_freeze.today().strftime('%Y-%m-%d') == "2013-04-09" # type: ignore E AssertionError: assert '2013-04-08' == '2013-04-09' E E - 2013-04-09 E ? ^ E + 2013-04-08 E ? ^ tests/test_datetimes.py:542: AssertionError =============================== warnings summary =============================== tests/test_datetimes.py::test_simple_api /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_datetimes.py:75: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). assert datetime.datetime.utcnow() != datetime.datetime(2012, 1, 14) tests/test_datetimes.py::test_compare_datetime_and_time_with_timezone /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_datetimes.py:795: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert now == datetime.datetime.utcfromtimestamp(time.time()) tests/test_datetimes.py::test_timestamp_with_tzoffset /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_datetimes.py:812: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). assert utcnow == datetime.datetime.utcfromtimestamp(time.time()) tests/test_pickle.py::test_pickle /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build/tests/test_pickle.py:13: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC). utc_now = datetime.datetime.utcnow() -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html =========================== short test summary info ============================ FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_frozen_time_with_func FAILED tests/test_datetimes.py::TestUnitTestMethodDecorator::test_method_decorator_works_on_unittest_kwarg_hello ============= 3 failed, 130 passed, 4 skipped, 4 warnings in 2.58s ============= E: pybuild pybuild:389: test: plugin distutils failed with: exit code=1: cd /build/reproducible-path/freezegun-1.5.1/.pybuild/cpython3_3.12_freezegun/build; python3.12 -m pytest tests rm -fr -- /tmp/dh-xdg-rundir-qtF9li84 dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.13 3.12" returned exit code 13 make: *** [debian/rules:8: binary] Error 25 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/52125 and its subdirectories freezegun failed to build from source. removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/freezegun_1.5.1-1.1.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/freezegun_1.5.1-1.1.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/freezegun_1.5.1-1.1.build1.log.gz' Wed Jan 22 20:21:23 UTC 2025 W: No second build log, what happened? Compressing the 1st log... b1/build.log: 82.9% -- replaced with stdout INSERT 0 1 INSERT 0 1 DELETE 1 [2025-01-22 20:21:23] INFO: Starting at 2025-01-22 20:21:23.999554 [2025-01-22 20:21:24] INFO: Generating the pages of 1 package(s) [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/armhf/freezegun_1.5.1-1.1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/armhf/freezegun_1.5.1-1.1.diff.gz is missing [2025-01-22 20:21:24] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/i386/freezegun didn't produce a buildlog, even though it has been built. [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/amd64/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/amd64/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/arm64/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/arm64/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/armhf/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/armhf/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:24] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/i386/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/i386/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:24] INFO: Finished at 2025-01-22 20:21:24.497451, took: 0:00:00.497905 Wed Jan 22 20:21:24 UTC 2025 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/i386/freezegun.html Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/freezegun_1.5.1-1.2.rbuild.log: 81.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/freezegun_1.5.1-1.2.rbuild.log.gz [2025-01-22 20:21:24] INFO: Starting at 2025-01-22 20:21:24.882953 [2025-01-22 20:21:24] INFO: Generating the pages of 1 package(s) [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/arm64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/arm64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/amd64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/amd64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/arm64/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/arm64/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/armhf/freezegun_1.5.1-1.1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/armhf/freezegun_1.5.1-1.1.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/freezegun_1.5.1-1.2.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/freezegun_1.5.1-1.2.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/amd64/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/amd64/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/arm64/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/arm64/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/armhf/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/armhf/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:25] ERROR: Either /var/lib/jenkins/userContent/reproducible/debian/logs/bookworm/i386/freezegun_1.2.1+actually1.2.1-1.build2.log.gz or /var/lib/jenkins/userContent/reproducible/debian/logdiffs/bookworm/i386/freezegun_1.2.1+actually1.2.1-1.diff.gz is missing [2025-01-22 20:21:25] INFO: Finished at 2025-01-22 20:21:25.337177, took: 0:00:00.454231 All cleanup done. Wed Jan 22 20:21:25 UTC 2025 - total duration: 0h 1m 33s. Wed Jan 22 20:21:25 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-ap0YdjkD, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 34.642s CPU time consumed: 5.158s